mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-10-19 13:41:03 +00:00
Kris Austin
d16ca97380
Port the U1 top cover purifier mode and the related start G-code changes from Snapmaker's Orca (Snapmaker/OrcaSlicer#504 and Snapmaker/OrcaSlicer#1005, as of 8931178229). The start G-code sends SET_PURIFIER_MODE for strong cooling, weak cooling or keep warm, picked from the lowest softening temperature of the filaments used through min_vitrification_temperature, with Snapmaker's thresholds and parameters. It also pre-extrudes the first tool, and turns the part fan off for probing and back on for nozzle cleaning. U1 filament presets use Snapmaker's softening temperatures. U1 presets that have no U1 version in Snapmaker's Orca use the value Snapmaker gives that material on the U1.
327 lines
4.7 KiB
JSON
327 lines
4.7 KiB
JSON
{
|
|
"type": "filament",
|
|
"name": "Snapmaker TPU 95A @U1",
|
|
"inherits": "Snapmaker TPU 95A @U1 base",
|
|
"from": "system",
|
|
"setting_id": "XdvEzjOGtQKamDRC",
|
|
"instantiation": "true",
|
|
"compatible_printers": [
|
|
"Snapmaker U1 (0.4 nozzle)"
|
|
],
|
|
"activate_air_filtration": [
|
|
"0",
|
|
"0"
|
|
],
|
|
"activate_chamber_temp_control": [
|
|
"0"
|
|
],
|
|
"adaptive_pressure_advance": [
|
|
"0",
|
|
"0"
|
|
],
|
|
"adaptive_pressure_advance_bridges": [
|
|
"0",
|
|
"0"
|
|
],
|
|
"adaptive_pressure_advance_model": [
|
|
"0,0,0\n0,0,0",
|
|
"0,0,0\n0,0,0"
|
|
],
|
|
"adaptive_pressure_advance_overhangs": [
|
|
"0",
|
|
"0"
|
|
],
|
|
"additional_cooling_fan_speed": [
|
|
"70",
|
|
"70"
|
|
],
|
|
"chamber_temperature": [
|
|
"0"
|
|
],
|
|
"close_fan_the_first_x_layers": [
|
|
"3"
|
|
],
|
|
"compatible_printers_condition": "",
|
|
"compatible_prints": [],
|
|
"compatible_prints_condition": "",
|
|
"complete_print_exhaust_fan_speed": [
|
|
"80",
|
|
"80"
|
|
],
|
|
"cool_plate_temp": [
|
|
"30"
|
|
],
|
|
"cool_plate_temp_initial_layer": [
|
|
"30"
|
|
],
|
|
"dont_slow_down_outer_wall": [
|
|
"0"
|
|
],
|
|
"during_print_exhaust_fan_speed": [
|
|
"60",
|
|
"60"
|
|
],
|
|
"enable_overhang_bridge_fan": [
|
|
"1"
|
|
],
|
|
"enable_pressure_advance": [
|
|
"0",
|
|
"0"
|
|
],
|
|
"eng_plate_temp": [
|
|
"30"
|
|
],
|
|
"eng_plate_temp_initial_layer": [
|
|
"30"
|
|
],
|
|
"fan_cooling_layer_time": [
|
|
"100"
|
|
],
|
|
"fan_max_speed": [
|
|
"70",
|
|
"70"
|
|
],
|
|
"fan_min_speed": [
|
|
"70",
|
|
"70"
|
|
],
|
|
"filament_cooling_final_speed": [
|
|
"3.4"
|
|
],
|
|
"filament_cooling_initial_speed": [
|
|
"2.2"
|
|
],
|
|
"filament_cooling_moves": [
|
|
"4"
|
|
],
|
|
"filament_cost": [
|
|
"20"
|
|
],
|
|
"filament_density": [
|
|
"1.24"
|
|
],
|
|
"filament_deretraction_speed": [
|
|
"8",
|
|
"8"
|
|
],
|
|
"filament_diameter": [
|
|
"1.75"
|
|
],
|
|
"filament_end_gcode": [
|
|
"; filament end gcode \n"
|
|
],
|
|
"filament_flow_ratio": [
|
|
"1",
|
|
"1"
|
|
],
|
|
"filament_is_support": [
|
|
"0"
|
|
],
|
|
"filament_loading_speed": [
|
|
"28"
|
|
],
|
|
"filament_loading_speed_start": [
|
|
"3"
|
|
],
|
|
"filament_long_retractions_when_cut": [
|
|
"nil",
|
|
"nil"
|
|
],
|
|
"filament_max_volumetric_speed": [
|
|
"3.2",
|
|
"3.2"
|
|
],
|
|
"filament_minimal_purge_on_wipe_tower": [
|
|
"15",
|
|
"15"
|
|
],
|
|
"filament_multitool_ramming": [
|
|
"0",
|
|
"0"
|
|
],
|
|
"filament_multitool_ramming_flow": [
|
|
"10",
|
|
"10"
|
|
],
|
|
"filament_multitool_ramming_volume": [
|
|
"10",
|
|
"10"
|
|
],
|
|
"filament_notes": [
|
|
""
|
|
],
|
|
"filament_ramming_parameters": [
|
|
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
|
],
|
|
"filament_retract_before_wipe": [
|
|
"nil",
|
|
"nil"
|
|
],
|
|
"filament_retract_lift_above": [
|
|
"nil",
|
|
"nil"
|
|
],
|
|
"filament_retract_lift_below": [
|
|
"nil",
|
|
"nil"
|
|
],
|
|
"filament_retract_lift_enforce": [
|
|
"nil",
|
|
"nil"
|
|
],
|
|
"filament_retract_restart_extra": [
|
|
"nil",
|
|
"nil"
|
|
],
|
|
"filament_retract_when_changing_layer": [
|
|
"nil",
|
|
"nil"
|
|
],
|
|
"filament_retraction_distances_when_cut": [
|
|
"nil",
|
|
"nil"
|
|
],
|
|
"filament_retraction_length": [
|
|
"1.4",
|
|
"1.4"
|
|
],
|
|
"filament_retraction_minimum_travel": [
|
|
"nil",
|
|
"nil"
|
|
],
|
|
"filament_retraction_speed": [
|
|
"30",
|
|
"30"
|
|
],
|
|
"filament_shrink": [
|
|
"100%"
|
|
],
|
|
"filament_shrinkage_compensation_z": [
|
|
"100%"
|
|
],
|
|
"filament_soluble": [
|
|
"0"
|
|
],
|
|
"filament_stamping_distance": [
|
|
"0"
|
|
],
|
|
"filament_stamping_loading_speed": [
|
|
"0"
|
|
],
|
|
"filament_start_gcode": [
|
|
"; filament start gcode\n"
|
|
],
|
|
"filament_toolchange_delay": [
|
|
"0"
|
|
],
|
|
"filament_type": [
|
|
"TPU"
|
|
],
|
|
"filament_unloading_speed": [
|
|
"90"
|
|
],
|
|
"filament_unloading_speed_start": [
|
|
"100"
|
|
],
|
|
"filament_vendor": [
|
|
"Snapmaker"
|
|
],
|
|
"filament_wipe": [
|
|
"nil",
|
|
"nil"
|
|
],
|
|
"filament_wipe_distance": [
|
|
"nil",
|
|
"nil"
|
|
],
|
|
"filament_z_hop": [
|
|
"0.4",
|
|
"0.4"
|
|
],
|
|
"filament_z_hop_types": [
|
|
"Auto Lift",
|
|
"Auto Lift"
|
|
],
|
|
"full_fan_speed_layer": [
|
|
"0"
|
|
],
|
|
"hot_plate_temp": [
|
|
"55"
|
|
],
|
|
"hot_plate_temp_initial_layer": [
|
|
"55"
|
|
],
|
|
"idle_temperature": [
|
|
"0"
|
|
],
|
|
"nozzle_temperature": [
|
|
"225",
|
|
"225"
|
|
],
|
|
"nozzle_temperature_initial_layer": [
|
|
"225",
|
|
"225"
|
|
],
|
|
"nozzle_temperature_range_high": [
|
|
"250",
|
|
"250"
|
|
],
|
|
"nozzle_temperature_range_low": [
|
|
"200",
|
|
"200"
|
|
],
|
|
"overhang_fan_speed": [
|
|
"100"
|
|
],
|
|
"overhang_fan_threshold": [
|
|
"95%"
|
|
],
|
|
"pellet_flow_coefficient": [
|
|
"0.4157"
|
|
],
|
|
"pressure_advance": [
|
|
"0.02",
|
|
"0.02"
|
|
],
|
|
"reduce_fan_stop_start_freq": [
|
|
"1"
|
|
],
|
|
"required_nozzle_HRC": [
|
|
"0"
|
|
],
|
|
"slow_down_for_layer_cooling": [
|
|
"1"
|
|
],
|
|
"slow_down_layer_time": [
|
|
"8"
|
|
],
|
|
"slow_down_min_speed": [
|
|
"10"
|
|
],
|
|
"support_material_interface_fan_speed": [
|
|
"-1"
|
|
],
|
|
"temperature_vitrification": [
|
|
"30"
|
|
],
|
|
"textured_cool_plate_temp": [
|
|
"40"
|
|
],
|
|
"textured_cool_plate_temp_initial_layer": [
|
|
"40"
|
|
],
|
|
"textured_plate_temp": [
|
|
"35"
|
|
],
|
|
"textured_plate_temp_initial_layer": [
|
|
"35"
|
|
],
|
|
"default_filament_colour": [
|
|
""
|
|
],
|
|
"filament_extruder_variant": [
|
|
"Direct Drive Standard",
|
|
"Direct Drive High Flow"
|
|
]
|
|
}
|