mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-07-16 15:32:09 +00:00
8cb2e4e01e
* profiles: enforce globally-unique, per-vendor-namespaced setting_id Many non-Bambu vendors copied Bambu's generic setting_ids (GFSA04 alone appeared in 1557 files), so setting_id was not globally unique. This namespaces every vendor's ids and reserves Bambu/OrcaFilamentLibrary space. - Reserve "G*" (Bambu) and "O*" (OrcaFilamentLibrary) id spaces. - Assign each other vendor a 2-char prefix (first+last letter, collision resolved) and renumber every instantiated preset to <PREFIX><NNNN>. - Strip setting_id from base profiles (instantiation:false) per Bambu's convention; assign one to instantiated presets that lacked it. - Remove the pre-existing misspelled "settings_id" key (91 files). - filament_id is left untouched (it is a per-material id). - Add one-time migration script scripts/assign_vendor_setting_ids.py with a persisted registry resources/profiles/vendor_prefixes.json. Re-runs freeze existing ids; only new vendors/profiles get new ids. - Bump version in each changed vendor index file. - Extend scripts/orca_extra_profile_check.py with a CI guard: global uniqueness, in-namespace, no base setting_id, no gaps, no settings_id typo. 7425 profile files changed across 61 vendors; 0 cross-vendor collisions; validator clean; migration idempotent. BBL and OrcaFilamentLibrary id spaces untouched. * profiles: add setting_id authoring guide for new vendors / profiles * profiles: drop in-repo README; setting_id guide now lives in the wiki * profiles: derive setting_id deterministically from vendor/type/name * bump profile version
38 lines
1.1 KiB
JSON
38 lines
1.1 KiB
JSON
{
|
|
"type": "filament",
|
|
"name": "Elegoo PLA Marble @System",
|
|
"inherits": "Elegoo PLA @base",
|
|
"from": "system",
|
|
"setting_id": "kq7NS8IhIV4cBI1C",
|
|
"instantiation": "true",
|
|
"renamed_from": "Elegoo PLA Marble",
|
|
"fan_min_speed": [
|
|
"80"
|
|
],
|
|
"filament_max_volumetric_speed": [
|
|
"18"
|
|
],
|
|
"nozzle_temperature": [
|
|
"220"
|
|
],
|
|
"nozzle_temperature_initial_layer": [
|
|
"220"
|
|
],
|
|
"nozzle_temperature_range_high": [
|
|
"220"
|
|
],
|
|
"pressure_advance": [
|
|
"0.052"
|
|
],
|
|
"enable_pressure_advance": [
|
|
"1"
|
|
],
|
|
"slow_down_layer_time": [
|
|
"4"
|
|
],
|
|
"filament_start_gcode": [
|
|
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
|
],
|
|
"compatible_printers": []
|
|
}
|