mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-18 11:02:08 +00:00
16727644bb
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
87 lines
3.9 KiB
JSON
87 lines
3.9 KiB
JSON
{
|
|
"type": "machine",
|
|
"name": "Wanhao D12-300 0.4 nozzle",
|
|
"inherits": "fdm_wanhao_common",
|
|
"from": "system",
|
|
"setting_id": "GM001",
|
|
"instantiation": "true",
|
|
"printer_model": "Wanhao D12-300",
|
|
"nozzle_diameter": [
|
|
"0.4"
|
|
],
|
|
"printable_area": [
|
|
"0x0",
|
|
"300x0",
|
|
"300x300",
|
|
"0x300"
|
|
],
|
|
"printable_height": "400",
|
|
"nozzle_type": "undefine",
|
|
"auxiliary_fan": "0",
|
|
"deretraction_speed": [
|
|
"70"
|
|
],
|
|
"gcode_flavor": "marlin",
|
|
"machine_max_acceleration_e": [
|
|
"10000"
|
|
],
|
|
"machine_max_acceleration_extruding": [
|
|
"1000"
|
|
],
|
|
"machine_max_acceleration_retracting": [
|
|
"1000"
|
|
],
|
|
"machine_max_acceleration_x": [
|
|
"1000"
|
|
],
|
|
"machine_max_acceleration_y": [
|
|
"1000"
|
|
],
|
|
"machine_max_acceleration_z": [
|
|
"100"
|
|
],
|
|
"machine_max_speed_e": [
|
|
"60"
|
|
],
|
|
"machine_max_speed_x": [
|
|
"500"
|
|
],
|
|
"machine_max_speed_y": [
|
|
"500"
|
|
],
|
|
"machine_max_speed_z": [
|
|
"10"
|
|
],
|
|
"machine_max_jerk_e": [
|
|
"5"
|
|
],
|
|
"machine_max_jerk_x": [
|
|
"10"
|
|
],
|
|
"machine_max_jerk_y": [
|
|
"10"
|
|
],
|
|
"machine_max_jerk_z": [
|
|
"0.3"
|
|
],
|
|
"max_layer_height": [
|
|
"0.32"
|
|
],
|
|
"min_layer_height": [
|
|
"0.10"
|
|
],
|
|
"printer_variant": "0.4",
|
|
"retraction_minimum_travel": [
|
|
"1.5"
|
|
],
|
|
"retraction_length": [
|
|
"5"
|
|
],
|
|
"retraction_speed": [
|
|
"40"
|
|
],
|
|
"default_print_profile": "0.15mm Optimal @Wanhao D12-300",
|
|
"machine_start_gcode": "; Wanhao D12-300 Start G-code\n; M117 Initial homing sequence. ; Home so that the probe is positioned to heat\nG28\nM117 Probe heating position\nG0 X65 Y5 Z1 ; Move the probe to the heating position.\nM117 Getting the heaters up to temp!\nM104 S140 ; Set Extruder temperature, no wait\nM140 S60 ; Set Heat Bed temperature\nM190 S60 ; Wait for Heat Bed temperature\nM117 Waiting for probe to warm! ; Wait another 90s for the probe to absorb heat.\nG4 S90\nM117 Post warming re-home\nG28 ; Home all axes again after warming\nM117 Z-Dance of my people\nG34\nM117 ABL Probing\nG29\nM900 K0 L0 T0 ;Edit the K and L values if you have calibrated a k factor for your filament\nM900 T0 S0\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X4.1 Y10 Z0.3 F5000.0 ; Move to start position\nM117 Getting the extruder up to temp\nM140 S[first_layer_bed_temperature] ; Set Heat Bed temperature\nM104 S[first_layer_temperature] ; Set Extruder temperature\nM109 S[first_layer_temperature] ; Wait for Extruder temperature\nM190 S[first_layer_bed_temperature] ; Wait for Heat Bed temperature\nG92 E0 ; Reset Extruder\nM117 Purging\nG1 X4.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line\nG1 X4.4 Y200.0 Z0.3 F5000.0 ; Move to side a little\nG1 X4.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nM117 Lets make\nG1 X8 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish",
|
|
"machine_end_gcode": "; Wanhao D12-300 Default End Gcode\nG91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract a bit more and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z by 10mm\nG90 ;Return to absolute positioning\nG1 X0 Y{print_bed_max[1]} ;TaDaaaa\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z"
|
|
}
|