mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-17 02:22:17 +00:00
16727644bb
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
113 lines
8.8 KiB
JSON
113 lines
8.8 KiB
JSON
{
|
|
"type": "machine",
|
|
"name": "Sovol Zero 0.4 nozzle",
|
|
"inherits": "fdm_machine_common",
|
|
"from": "system",
|
|
"setting_id": "GM001",
|
|
"instantiation": "true",
|
|
"printer_model": "Sovol Zero",
|
|
"default_print_profile": "0.20mm Standard @Sovol Zero 0.4 nozzle",
|
|
"printer_variant": "0.4",
|
|
"nozzle_diameter": [
|
|
"0.4"
|
|
],
|
|
"retract_before_wipe": [
|
|
"100%"
|
|
],
|
|
"printable_area": [
|
|
"0x0",
|
|
"152.4x0",
|
|
"152.4x152.4",
|
|
"0x152.4"
|
|
],
|
|
"printable_height": "152.4",
|
|
"gcode_flavor": "klipper",
|
|
"retraction_length": [
|
|
"0.8"
|
|
],
|
|
"machine_max_speed_e": [
|
|
"50"
|
|
],
|
|
"machine_max_speed_x": [
|
|
"1200"
|
|
],
|
|
"machine_max_speed_y": [
|
|
"1200"
|
|
],
|
|
"machine_max_speed_z": [
|
|
"30"
|
|
],
|
|
"machine_max_acceleration_e": [
|
|
"20000"
|
|
],
|
|
"machine_max_acceleration_extruding": [
|
|
"40000"
|
|
],
|
|
"machine_max_acceleration_retracting": [
|
|
"20000"
|
|
],
|
|
"machine_max_acceleration_travel": [
|
|
"40000"
|
|
],
|
|
"machine_max_acceleration_x": [
|
|
"40000"
|
|
],
|
|
"machine_max_acceleration_y": [
|
|
"40000"
|
|
],
|
|
"machine_max_acceleration_z": [
|
|
"1000"
|
|
],
|
|
"machine_max_jerk_e": [
|
|
"2.5"
|
|
],
|
|
"machine_max_jerk_x": [
|
|
"5"
|
|
],
|
|
"machine_max_jerk_y": [
|
|
"5"
|
|
],
|
|
"machine_max_jerk_z": [
|
|
"0.5"
|
|
],
|
|
"z_hop": [
|
|
"0.4"
|
|
],
|
|
"retraction_speed": [
|
|
"40"
|
|
],
|
|
"deretraction_speed": [
|
|
"40"
|
|
],
|
|
"retraction_minimum_travel": [
|
|
"0"
|
|
],
|
|
"retract_length_toolchange": [
|
|
"2"
|
|
],
|
|
"wipe": [
|
|
"1"
|
|
],
|
|
"wipe_distance": [
|
|
"2"
|
|
],
|
|
"z_hop_types": [
|
|
"Auto Lift"
|
|
],
|
|
"thumbnails": [
|
|
"300x300",
|
|
"32x32"
|
|
],
|
|
"retract_lift_below": [
|
|
"150"
|
|
],
|
|
"auxiliary_fan": "1",
|
|
"thumbnails_format": "PNG",
|
|
"before_layer_change_gcode": "TIMELAPSE_TAKE_FRAME\nG92 E0\nSET_PRINT_STATS_INFO CURRENT_LAYER=[layer_num]\n",
|
|
"machine_start_gcode": "M140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\nG28\nSTART_PRINT\nG28\nG90\nG1 X0 Y0 F12000\nG1 Z0.300 F600\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nM109 S[nozzle_temperature_initial_layer];wait for extruder temp\n{if first_layer_print_min[1] - 6 > print_bed_min[1]}\nG90\nM83\nG1 E-0.5 F600\nG1 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4} Y{first_layer_print_min[1] - 5} F12000\nG0 Z0.3 F600 ;Move to start position\nG1 E0.200 F600\n{if first_layer_print_max[0] - first_layer_print_min[0] > 50}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*1} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*2} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*3} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*4} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*5} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*6} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*7} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*8} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*9} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*10} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n{else}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 2} E{(first_layer_print_max[0] - first_layer_print_min[0]) / 2 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0])} E{(first_layer_print_max[0] - first_layer_print_min[0]) / 2 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n{endif}\nG1 E-0.300 F600\nG0 Z1 F600\nG1 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4} Y{first_layer_print_min[1] - 4} F12000\nG0 Z0.3 F600 ;Move to start position\nG1 E0.200 F600\n{if first_layer_print_max[0] - first_layer_print_min[0] > 50}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*1} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*2} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*3} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*4} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*5} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*6} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*7} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*8} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*9} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*10} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n{else}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 2} E{(first_layer_print_max[0] - first_layer_print_min[0]) / 2 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0])} E{(first_layer_print_max[0] - first_layer_print_min[0]) / 2 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n{endif}\nG1 E-0.300 F600\nG0 Z5 F600\nM400\n{else}\nG90\nM83\nG1 E-0.300 Z3 F600\nG1 X{print_bed_max[1] / 3} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 Z0.3 F600\nG1 E0.300 F600\nG1 X{print_bed_max[1] / 3 + 5*1} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 X{print_bed_max[1] / 3 + 5*2} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X{print_bed_max[1] / 3 + 5*3} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 X{print_bed_max[1] / 3 + 5*4} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X{print_bed_max[1] / 3 + 5*5} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 X{print_bed_max[1] / 3 + 5*6} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X{print_bed_max[1] / 3 + 5*7} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 X{print_bed_max[1] / 3 + 5*8} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X{print_bed_max[1] / 3 + 5*9} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 X{print_bed_max[1] / 3 + 5*10} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X{print_bed_max[1] / 3} Y1 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X{print_bed_max[1] / 3 + 5*1} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 X{print_bed_max[1] / 3 + 5*2} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X{print_bed_max[1] / 3 + 5*3} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 X{print_bed_max[1] / 3 + 5*4} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X{print_bed_max[1] / 3 + 5*5} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 X{print_bed_max[1] / 3 + 5*6} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X{print_bed_max[1] / 3 + 5*7} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 X{print_bed_max[1] / 3 + 5*8} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X{print_bed_max[1] / 3 + 5*9} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 X{print_bed_max[1] / 3 + 5*10} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 E-0.300 Z3 F600\nM400\n{endif}\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\n\n",
|
|
"machine_end_gcode": "END_PRINT\n",
|
|
"default_filament_profile": [
|
|
"Sovol Zero PLA Basic"
|
|
]
|
|
}
|