mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-16 18:12:10 +00:00
16727644bb
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
76 lines
7.4 KiB
JSON
76 lines
7.4 KiB
JSON
{
|
|
"type": "machine",
|
|
"name": "Qidi Q2 0.4 nozzle",
|
|
"inherits": "fdm_q_common",
|
|
"from": "system",
|
|
"setting_id": "GM001",
|
|
"instantiation": "true",
|
|
"box_id": "1",
|
|
"printer_model": "Qidi Q2",
|
|
"gcode_flavor": "klipper",
|
|
"default_print_profile": "0.20mm Standard @Qidi Q2",
|
|
"printer_settings_id": "Qidi",
|
|
"bed_exclude_area": [
|
|
"0x0,11x0,11x16,0x16"
|
|
],
|
|
"cooling_tube_retraction": "0",
|
|
"cooling_tube_length": "0",
|
|
"parking_pos_retraction": "0",
|
|
"extra_loading_move": "5",
|
|
"change_filament_gcode": "G1 Z{max_layer_z + 3.0} F1200\nTOOL_CHANGE_START F=[current_extruder] T=[next_extruder]\nBUFFER_MONITORING ENABLE=0\nDISABLE_ALL_SENSOR\nM106 S255\nMOVE_TO_TRASH\n{if long_retractions_when_cut[previous_extruder]}\nG1 E-{retraction_distances_when_cut[previous_extruder]} F{old_filament_e_feedrate}\n{else}\nG1 E-10 F{old_filament_e_feedrate}\n{endif}\nM400\nCUT_FILAMENT T=[current_extruder]\nMOVE_TO_TRASH\nM106 P2 S0\nUNLOAD_T[current_extruder]\nT[next_extruder]\n{if nozzle_temperature_range_high[current_extruder] >= nozzle_temperature_range_high[next_extruder]}\nM104 S{nozzle_temperature_range_high[current_extruder]}\n{else}\nM104 S{nozzle_temperature_range_high[next_extruder]}\n{endif}\n; FLUSH_START\nM106 S25\nG1 E30 F300\n; FLUSH_END\n{if long_retractions_when_cut[previous_extruder]}\nG1 E{retraction_distances_when_cut[previous_extruder]} F{old_filament_e_feedrate}\n{endif}\n{if flush_length_1 > 1}\n; FLUSH_START\n{if flush_length_1 > 23.7}\nG1 E23.7 F{old_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{old_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\n{else}\nG1 E{flush_length_1} F{old_filament_e_feedrate}\n{endif}\nG1 E-[old_retract_length_toolchange] F1800\n; FLUSH_END\n{endif}\n{if flush_length_2 > 1}\n; FLUSH_START\nG1 X92 F9000\nG1 E[old_retract_length_toolchange] F300\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E-[new_retract_length_toolchange] F1800\n; FLUSH_END\n{endif}\n{if flush_length_3 > 1}\n; FLUSH_START\nG1 X85 F9000\nG1 E[new_retract_length_toolchange] F300\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E-[new_retract_length_toolchange] F1800\n; FLUSH_END\n{endif}\n{if flush_length_4 > 1}\n; FLUSH_START\nG1 X92 F9000\nG1 E[new_retract_length_toolchange] F300\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E-[new_retract_length_toolchange] F1800\n; FLUSH_END\n{endif}\nM400\nM106 S255\nM104 S[new_filament_temp]\nINIT_SYNC_BUFFER_STATE\nBUFFER_MONITORING ENABLE=1\nG1 E10 F25 \nM109 S[new_filament_temp]\nG1 E-5 F1800\nCLEAR_OOZE\nTOOL_CHANGE_END\nG1 Y270 F8000\nM106 S0\nG1 E2 F1800\nENABLE_ALL_SENSOR\n",
|
|
"default_filament_profile": [
|
|
"QIDI PLA Rapido @Qidi Q2 0.4 nozzle"
|
|
],
|
|
"enable_long_retraction_when_cut": "2",
|
|
"extruder_clearance_max_radius": "75",
|
|
"extruder_clearance_dist_to_rod": "47",
|
|
"extruder_clearance_height_to_rod": "47",
|
|
"extruder_clearance_height_to_lid": "152",
|
|
"is_support_3mf": "1",
|
|
"is_support_timelapse": "1",
|
|
"is_support_multi_box": "0",
|
|
"layer_change_gcode": "{if timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 E-[retraction_length] F1800\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nG1 Y235 F20000\nG1 X97 F20000\n{if layer_z <=25}\nG1 Z25\n{endif}\nG1 Y254 F2000\nG92 E0\nM400\nTIMELAPSE_TAKE_FRAME\nG1 E[retraction_length] F300\nG1 X85 F2000\nG1 X97 F2000\nG1 Y220 F2000\n{if layer_z <=25}\nG1 Z[layer_z]\n{endif}\n{elsif timelapse_type == 0} ; timelapse without wipe tower\nTIMELAPSE_TAKE_FRAME\n{endif}\nG92 E0\nSET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
|
|
"machine_end_gcode": "DISABLE_BOX_HEATER\nM141 S0\nM140 S0\nBUFFER_MONITORING ENABLE=0\nDISABLE_ALL_SENSOR\nG1 E-3 F1800\nG0 Z{max_layer_z + 3} F600\nUNLOAD_FILAMENT T=[current_extruder]\nG0 Y270 F12000\nG0 X90 Y270 F12000\n{if max_layer_z < max_print_height / 2}G1 Z{max_print_height / 2 + 10} F600{else}G1 Z{min(max_print_height, max_layer_z + 3)}{endif}\nM104 S0",
|
|
"machine_load_filament_time": "35",
|
|
"machine_max_jerk_e": [
|
|
"4"
|
|
],
|
|
"machine_max_jerk_x": [
|
|
"9"
|
|
],
|
|
"machine_max_jerk_y": [
|
|
"9"
|
|
],
|
|
"machine_max_jerk_z": [
|
|
"4"
|
|
],
|
|
"machine_max_speed_z": [
|
|
"20"
|
|
],
|
|
"machine_pause_gcode": "PAUSE",
|
|
"machine_start_gcode": "INIT_MAPPING_VALUE\nPRINT_START BED=[bed_temperature_initial_layer_single] HOTEND=[nozzle_temperature_initial_layer] CHAMBER=[chamber_temperature] EXTRUDER=[initial_no_support_extruder]\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\nM83\nM140 S[bed_temperature_initial_layer_single]\nM104 S[nozzle_temperature_initial_layer]\nM141 S[chamber_temperature]\nG4 P3000\nT[initial_tool]\nG1 X108.000 Y1 F30000\nG0 Z[initial_layer_print_height] F600\n;G1 E3 F1800\nG90\nM83\nG0 X128 E8 F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X133 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X138 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X143 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X148 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X153 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG91\nG1 X1 Z-0.300\nG1 X4\nG1 Z1 F1200\nG90\nM400\nG1 X108.000 Y2.5 F30000\nG0 Z[initial_layer_print_height] F600\nM83\nG0 X128 E10 F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X133 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X138 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X143 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X148 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X153 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG91\nG1 X1 Z-0.300\nG1 X4\nG1 Z1 F1200\nG90\nM400\nG1 Z1 F600",
|
|
"machine_unload_filament_time": "35",
|
|
"nozzle_diameter": [
|
|
"0.4"
|
|
],
|
|
"nozzle_volume": [
|
|
"125"
|
|
],
|
|
"printable_area": [
|
|
"0x0",
|
|
"270x0",
|
|
"270x270",
|
|
"0x270"
|
|
],
|
|
"printable_height": "256",
|
|
"retract_lift_below": [
|
|
"259"
|
|
],
|
|
"support_box_temp_control": "1",
|
|
"thumbnails_format": "PNG",
|
|
"thumbnail_size": [
|
|
"150x150"
|
|
],
|
|
"printer_agent": "qidi"
|
|
}
|