mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-17 10:32:20 +00:00
16727644bb
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
125 lines
4.0 KiB
JSON
125 lines
4.0 KiB
JSON
{
|
|
"type": "machine",
|
|
"name": "Prusa MINIIS 0.4 nozzle",
|
|
"inherits": "fdm_machine_common",
|
|
"from": "system",
|
|
"setting_id": "GM003",
|
|
"instantiation": "true",
|
|
"gcode_flavor": "marlin2",
|
|
"printer_model": "Prusa MINI IS",
|
|
"printer_variant": "0.4",
|
|
"default_filament_profile": [
|
|
"Prusa Generic PLA @MINIIS"
|
|
],
|
|
"default_print_profile": "0.20mm Standard @MINIIS",
|
|
"nozzle_diameter": [
|
|
"0.4"
|
|
],
|
|
"bed_exclude_area": [
|
|
"0x0"
|
|
],
|
|
"printable_area": [
|
|
"0x0",
|
|
"180x0",
|
|
"180x180",
|
|
"0x180"
|
|
],
|
|
"machine_max_acceleration_e": [
|
|
"5000",
|
|
"5000"
|
|
],
|
|
"machine_max_acceleration_extruding": [
|
|
"4000",
|
|
"4000"
|
|
],
|
|
"machine_max_acceleration_retracting": [
|
|
"1250",
|
|
"1250"
|
|
],
|
|
"machine_max_acceleration_x": [
|
|
"4000",
|
|
"4000"
|
|
],
|
|
"machine_max_acceleration_y": [
|
|
"4000",
|
|
"4000"
|
|
],
|
|
"machine_max_acceleration_z": [
|
|
"400",
|
|
"400"
|
|
],
|
|
"machine_max_acceleration_travel": [
|
|
"4000",
|
|
"4000"
|
|
],
|
|
"machine_max_jerk_e": [
|
|
"10",
|
|
"2.5"
|
|
],
|
|
"machine_max_jerk_x": [
|
|
"8",
|
|
"8"
|
|
],
|
|
"machine_max_jerk_y": [
|
|
"8",
|
|
"8"
|
|
],
|
|
"machine_max_jerk_z": [
|
|
"2",
|
|
"2"
|
|
],
|
|
"machine_max_speed_e": [
|
|
"80",
|
|
"25"
|
|
],
|
|
"machine_max_speed_x": [
|
|
"400",
|
|
"400"
|
|
],
|
|
"machine_max_speed_y": [
|
|
"400",
|
|
"400"
|
|
],
|
|
"retraction_length": [
|
|
"2.5"
|
|
],
|
|
"retraction_minimum_travel": [
|
|
"1.5"
|
|
],
|
|
"retraction_speed": [
|
|
"70"
|
|
],
|
|
"deretraction_speed": [
|
|
"40"
|
|
],
|
|
"z_hop": [
|
|
"0.2"
|
|
],
|
|
"machine_max_junction_deviation": [
|
|
"0.01"
|
|
],
|
|
"fan_speedup_time": "0.2",
|
|
"fan_speedup_overhangs": "1",
|
|
"fan_kickstart": "0",
|
|
"host_type": "prusalink",
|
|
"printable_height": "180",
|
|
"machine_end_gcode": "{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F720 ; Move print head up{endif}\nG1 X170 Y170 F4200 ; park print head\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+50, max_print_height)} F720 ; Move print head further up{endif}\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM221 S100 ; reset flow\nM572 S0 ; reset PA\nM569 S1 X Y ; reset to stealthchop for X Y\nM84 ; disable motors\n; max_layer_z = [max_layer_z]",
|
|
"machine_pause_gcode": "M601",
|
|
"machine_start_gcode": "M862.3 P \"MINI\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM862.5 P2 ; g-code level check\nM862.6 P\"Input shaper\" ; FW feature check\nM115 U6.4.0+11974\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nG28 ; home all without mesh bed level\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM569 S1 X Y ; set stealthchop for X Y\nM204 T1250 ; set travel acceleration\nG29 ; mesh bed leveling \nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0\n\nG1 X0 Y-2 Z3 F2400\n\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X10 Z0.2 F1000\nG1 X70 E8 F900\nG1 X140 E10 F700\nG92 E0\n\nM569 S0 X Y ; set spreadcycle for X Y\nM204 T[machine_max_acceleration_travel] ; restore travel acceleration\nM572 W0.06 ; set smooth time\nM221 S95 ; set flow",
|
|
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\nM201 X{interpolate_table(extruded_weight_total, (0,4000), (1000,1700), (10000,1700))} Y{interpolate_table(extruded_weight_total, (0,4000), (1000,1700), (10000,1700))}",
|
|
"change_filament_gcode": "M600",
|
|
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\n{if ! spiral_mode}M74 W[extruded_weight_total]{endif}\n",
|
|
"printer_notes": "Don't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MINIIS\nNO_TEMPLATES",
|
|
"scan_first_layer": "0",
|
|
"machine_load_filament_time": "17",
|
|
"machine_unload_filament_time": "16",
|
|
"nozzle_type": "brass",
|
|
"auxiliary_fan": "0",
|
|
"thumbnails": [
|
|
"16x16/QOI",
|
|
"220x124/QOI",
|
|
"200x240/QOI",
|
|
"640x480/PNG"
|
|
]
|
|
}
|