mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-16 18:12:10 +00:00
16727644bb
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
134 lines
2.8 KiB
JSON
134 lines
2.8 KiB
JSON
{
|
|
"type": "machine",
|
|
"name": "MM slb 0.4 nozzle",
|
|
"inherits": "fdm_machine_common",
|
|
"from": "system",
|
|
"setting_id": "GM001",
|
|
"instantiation": "true",
|
|
"printer_model": "MM slb",
|
|
"default_print_profile": "0.10mm Fine @MM slb",
|
|
"nozzle_diameter": [
|
|
"0.4"
|
|
],
|
|
"printable_area": [
|
|
"0x0",
|
|
"125x0",
|
|
"125x125",
|
|
"0x125"
|
|
],
|
|
"printable_height": "160",
|
|
"auxiliary_fan": "0",
|
|
"machine_max_acceleration_travel": [
|
|
"3000",
|
|
"3000"
|
|
],
|
|
"machine_max_acceleration_z": [
|
|
"100",
|
|
"100"
|
|
],
|
|
"machine_max_speed_z": [
|
|
"5",
|
|
"5"
|
|
],
|
|
"max_layer_height": [
|
|
"0.3"
|
|
],
|
|
"printer_settings_id": "MM",
|
|
"retract_before_wipe": [
|
|
"70%"
|
|
],
|
|
"wipe_distance": [
|
|
"1"
|
|
],
|
|
"single_extruder_multi_material": "1",
|
|
"change_filament_gcode": "",
|
|
"scan_first_layer": "0",
|
|
"cooling_tube_length": "20",
|
|
"cooling_tube_retraction": "60",
|
|
"extruder_clearance_height_to_lid": "100",
|
|
"extruder_clearance_height_to_rod": "32",
|
|
"extruder_clearance_radius": "50",
|
|
"machine_max_acceleration_e": [
|
|
"4000"
|
|
],
|
|
"machine_max_speed_e": [
|
|
"60",
|
|
"120"
|
|
],
|
|
"machine_pause_gcode": "M601",
|
|
"min_layer_height": [
|
|
"0.1"
|
|
],
|
|
"nozzle_type": "brass",
|
|
"parking_pos_retraction": "22",
|
|
"retract_length_toolchange": [
|
|
"5"
|
|
],
|
|
"retraction_minimum_travel": [
|
|
"1"
|
|
],
|
|
"machine_max_jerk_e": [
|
|
"2.5",
|
|
"2.5"
|
|
],
|
|
"machine_max_jerk_x": [
|
|
"9",
|
|
"20"
|
|
],
|
|
"machine_max_jerk_y": [
|
|
"9",
|
|
"20"
|
|
],
|
|
"thumbnails": [
|
|
"125x125"
|
|
],
|
|
"deretraction_speed": [
|
|
"25"
|
|
],
|
|
"machine_max_acceleration_extruding": [
|
|
"2000",
|
|
"1500"
|
|
],
|
|
"machine_max_acceleration_retracting": [
|
|
"2000",
|
|
"1500"
|
|
],
|
|
"machine_max_jerk_z": [
|
|
"2",
|
|
"0.4"
|
|
],
|
|
"machine_max_speed_x": [
|
|
"200",
|
|
"500"
|
|
],
|
|
"machine_max_speed_y": [
|
|
"200",
|
|
"500"
|
|
],
|
|
"retraction_length": [
|
|
"2"
|
|
],
|
|
"retraction_speed": [
|
|
"25"
|
|
],
|
|
"z_hop": [
|
|
"0.4"
|
|
],
|
|
"default_filament_profile": [
|
|
"Generic PLA @System"
|
|
],
|
|
"machine_max_acceleration_x": [
|
|
"2000",
|
|
"3000"
|
|
],
|
|
"machine_max_acceleration_y": [
|
|
"2000",
|
|
"3000"
|
|
],
|
|
"machine_start_gcode": "G0 Z3 F300\nM190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 ;Home\n;G29\nG0 Z5 F300\nG1 X0 Y50 F6000\nG92 E0\nG0 Z0.5 F300\nG1 F1000 Y0 E10\nG1 F1000 X50 E18\nG92 E0\nM117 Printing...",
|
|
"machine_end_gcode": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 \nM83\nG1 E-1 F600 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z1 F600\nG90 ;absolute positioning\nG1 X0 Y120 F6000\nG1 E-4 F1200\nM107 ; turn off fan\nM84 ;steppers off\nPRINT_END",
|
|
"z_hop_types": [
|
|
"Slope Lift"
|
|
]
|
|
}
|