mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-17 02:22:17 +00:00
16727644bb
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
22 lines
12 KiB
JSON
22 lines
12 KiB
JSON
{
|
|
"type": "machine",
|
|
"name": "Lulzbot Taz Pro S 0.5 nozzle",
|
|
"inherits": "Lulzbot Taz Pro Common",
|
|
"from": "system",
|
|
"setting_id": "LZPS001",
|
|
"instantiation": "true",
|
|
"single_extruder_multi_material": "1",
|
|
"extruders_count": "1",
|
|
"printer_model": "Lulzbot Taz Pro S",
|
|
"default_print_profile": "0.25mm Standard @Lulzbot Taz Pro S",
|
|
"nozzle_diameter": [
|
|
"0.5"
|
|
],
|
|
"printer_settings_id": "LulzbotPro-S",
|
|
"default_filament_profile": [
|
|
"Generic PLA @System"
|
|
],
|
|
"machine_start_gcode": ";This G-Code has been translated from Cura startup from CuraLE 4.13.10 to OrcaSlicer by Wrathernaut\nG4 S1 ; delay for 1 seconds to display file name\nM140 S{bed_temperature_initial_layer[initial_tool]}; begin bed temping up (w)\nM104 {if filament_type[initial_tool] == \"PLA\"}S180\n{elsif filament_type[initial_tool] == \"ABS\"}S190\n{elsif filament_type[initial_tool] == \"ABS-GF\"}S190\n{elsif filament_type[initial_tool] == \"ASA\"}S190\n{elsif filament_type[initial_tool] == \"ASA-Aero\"}S190\n{elsif filament_type[initial_tool] == \"BVOH\"}S170\n{elsif filament_type[initial_tool] == \"EVA\"}S170\n{elsif filament_type[initial_tool] == \"PA\"}R220\n{elsif filament_type[initial_tool] == \"PA-CF\"}R220\n{elsif filament_type[initial_tool] == \"PA-GF\"}R220\n{elsif filament_type[initial_tool] == \"PA6-CF\"}R220\n{elsif filament_type[initial_tool] == \"PA11-CF\"}R220\n{elsif filament_type[initial_tool] == \"ASA-Aero\"}S170\n{elsif filament_type[initial_tool] == \"PC\"}R220\n{elsif filament_type[initial_tool] == \"PC-CF\"}R220\n{elsif filament_type[initial_tool] == \"PCTG\"}S180\n{elsif filament_type[initial_tool] == \"PE\"}S190\n{elsif filament_type[initial_tool] == \"PE-CF\"}S190\n{elsif filament_type[initial_tool] == \"PET-CF\"}S190\n{elsif filament_type[initial_tool] == \"PETG\"}S190\n{elsif filament_type[initial_tool] == \"PETG-CF10\"}S190\n{elsif filament_type[initial_tool] == \"PHA\"}S180\n{elsif filament_type[initial_tool] == \"PLA-AERO\"}S180\n{elsif filament_type[initial_tool] == \"PLA-CF\"}S180\n{elsif filament_type[initial_tool] == \"PP\"}S180\n{elsif filament_type[initial_tool] == \"PP-CF\"}S180\n{elsif filament_type[initial_tool] == \"PP-GF\"}S180\n{elsif filament_type[initial_tool] == \"PPS\"}S180\n{elsif filament_type[initial_tool] == \"PPS-CF\"}S180\n{elsif filament_type[initial_tool] == \"PVA\"}S180\n{elsif filament_type[initial_tool] == \"PVB\"}S180\n{elsif filament_type[initial_tool] == \"SBS\"}S180\n{elsif filament_type[initial_tool] == \"TPU\"}S180\n{elsif filament_type[initial_tool] == \"FLEX\"}S180\n{elsif filament_type[initial_tool] == \"PET\"}S170\n{elsif filament_type[initial_tool] == \"HIPS\"}S170\n{elsif filament_type[initial_tool] == \"NYLON\"}R220\n{else}S190; unknown filament type soften temp before homing Z\n{endif}G28O; home all axes (if needed)\nM73 P0 ; clear LCD progress bar\nM75; start LCD print timer\nM107;disable fans\nM420 S0; disable leveling matrix\n{if enable_pressure_advance[0] == true}M900 [pressure_advance]; set pressure advance\n{endif}G90; absolute positioning\nM82; set extruder to absolute mode\nG92 E0; set extruder position to 0\nG0 X145 Y187 Z156 F3000; move away from endstops\nM117 Heating Nozzle...; progress indicator message on LCD\nM109 {if filament_type[0] == \"PLA\"}R180\n{elsif filament_type[0] == \"ABS\"}R190\n{elsif filament_type[0] == \"ABS-GF\"}R190\n{elsif filament_type[0] == \"ASA\"}R190\n{elsif filament_type[0] == \"ASA-Aero\"}R190\n{elsif filament_type[0] == \"BVOH\"}R170\n{elsif filament_type[0] == \"EVA\"}R170\n{elsif filament_type[0] == \"PA\"}R220\n{elsif filament_type[0] == \"PA-CF\"}R220\n{elsif filament_type[0] == \"PA-GF\"}R220\n{elsif filament_type[0] == \"PA6-CF\"}R220\n{elsif filament_type[0] == \"PA11-CF\"}R220\n{elsif filament_type[0] == \"ASA-Aero\"}R170\n{elsif filament_type[0] == \"PC\"}R220\n{elsif filament_type[0] == \"PC-CF\"}R220\n{elsif filament_type[0] == \"PCTG\"}R180\n{elsif filament_type[0] == \"PE\"}R190\n{elsif filament_type[0] == \"PE-CF\"}R190\n{elsif filament_type[0] == \"PET-CF\"}R190\n{elsif filament_type[0] == \"PETG\"}R190\n{elsif filament_type[0] == \"PETG-CF10\"}R190\n{elsif filament_type[0] == \"PHA\"}R180\n{elsif filament_type[0] == \"PLA-AERO\"}R180\n{elsif filament_type[0] == \"PLA-CF\"}R180\n{elsif filament_type[0] == \"PP\"}R180\n{elsif filament_type[0] == \"PP-CF\"}R180\n{elsif filament_type[0] == \"PP-GF\"}R180\n{elsif filament_type[0] == \"PPS\"}R180\n{elsif filament_type[0] == \"PPS-CF\"}R180\n{elsif filament_type[0] == \"PVA\"}R180\n{elsif filament_type[0] == \"PVB\"}R180\n{elsif filament_type[0] == \"SBS\"}R180\n{elsif filament_type[0] == \"TPU\"}R180\n{elsif filament_type[0] == \"FLEX\"}R180\n{elsif filament_type[0] == \"PET\"}R170\n{elsif filament_type[0] == \"HIPS\"}R170\n{elsif filament_type[0] == \"NYLON\"}R220\n{else}R190; unknown filament type soften temp before homing Z{endif};soften filament before retraction\nG1 E-7 F75; retract filament\nG92 E-12 ; set extruder position to -12 to account for 5mm retract at end of previous print\nM109 {if filament_type[0] == \"PLA\"}R180\n{elsif filament_type[0] == \"ABS\"}R190\n{elsif filament_type[0] == \"ABS-GF\"}R190\n{elsif filament_type[0] == \"ASA\"}R190\n{elsif filament_type[0] == \"ASA-Aero\"}R190\n{elsif filament_type[0] == \"BVOH\"}R170\n{elsif filament_type[0] == \"EVA\"}R170\n{elsif filament_type[0] == \"PA\"}R220\n{elsif filament_type[0] == \"PA-CF\"}R220\n{elsif filament_type[0] == \"PA-GF\"}R220\n{elsif filament_type[0] == \"PA6-CF\"}R220\n{elsif filament_type[0] == \"PA11-CF\"}R220\n{elsif filament_type[0] == \"ASA-Aero\"}R170\n{elsif filament_type[0] == \"PC\"}R220\n{elsif filament_type[0] == \"PC-CF\"}R220\n{elsif filament_type[0] == \"PCTG\"}R190\n{elsif filament_type[0] == \"PE\"}R190\n{elsif filament_type[0] == \"PE-CF\"}R190\n{elsif filament_type[0] == \"PET-CF\"}R190\n{elsif filament_type[0] == \"PETG\"}R190\n{elsif filament_type[0] == \"PETG-CF10\"}R190\n{elsif filament_type[0] == \"PHA\"}R180\n{elsif filament_type[0] == \"PLA-AERO\"}R180\n{elsif filament_type[0] == \"PLA-CF\"}R180\n{elsif filament_type[0] == \"PP\"}R180\n{elsif filament_type[0] == \"PP-CF\"}R180\n{elsif filament_type[0] == \"PP-GF\"}R180\n{elsif filament_type[0] == \"PPS\"}R180\n{elsif filament_type[0] == \"PPS-CF\"}R180\n{elsif filament_type[0] == \"PVA\"}R180\n{elsif filament_type[0] == \"PVB\"}R180\n{elsif filament_type[0] == \"SBS\"}R180\n{elsif filament_type[0] == \"TPU\"}R180\n{elsif filament_type[0] == \"FLEX\"}R180\n{elsif filament_type[0] == \"PET\"}R170\n{elsif filament_type[0] == \"HIPS\"}R180\n{elsif filament_type[0] == \"NYLON\"}R220\n{else}R170; unknown filament type wipe temp{endif};wait for extruder to reach wiping temp\nM104 {if filament_type[0] == \"PLA\"}R160\n{elsif filament_type[0] == \"ABS\"}R170\n{elsif filament_type[0] == \"ABS-GF\"}R170\n{elsif filament_type[0] == \"ASA\"}R170\n{elsif filament_type[0] == \"ASA-Aero\"}R170\n{elsif filament_type[0] == \"BVOH\"}R170\n{elsif filament_type[0] == \"EVA\"}R170\n{elsif filament_type[0] == \"PA\"}R200\n{elsif filament_type[0] == \"PA-CF\"}R200\n{elsif filament_type[0] == \"PA-GF\"}R170\n{elsif filament_type[0] == \"PA6-CF\"}R170\n{elsif filament_type[0] == \"PA11-CF\"}R200\n{elsif filament_type[0] == \"ASA-Aero\"}R170\n{elsif filament_type[0] == \"PC\"}R200\n{elsif filament_type[0] == \"PC-CF\"}R200\n{elsif filament_type[0] == \"PCTG\"}R180\n{elsif filament_type[0] == \"PE\"}R180\n{elsif filament_type[0] == \"PE-CF\"}R180\n{elsif filament_type[0] == \"PET-CF\"}R170\n{elsif filament_type[0] == \"PETG\"}R170\n{elsif filament_type[0] == \"PETG-CF10\"}R170\n{elsif filament_type[0] == \"PHA\"}R180\n{elsif filament_type[0] == \"PLA-AERO\"}R180\n{elsif filament_type[0] == \"PLA-CF\"}R180\n{elsif filament_type[0] == \"PP\"}R180\n{elsif filament_type[0] == \"PP-CF\"}R180\n{elsif filament_type[0] == \"PP-GF\"}R180\n{elsif filament_type[0] == \"PPS\"}R180\n{elsif filament_type[0] == \"PPS-CF\"}R180\n{elsif filament_type[0] == \"PVA\"}R160\n{elsif filament_type[0] == \"PVB\"}R160\n{elsif filament_type[0] == \"SBS\"}R180\n{elsif filament_type[0] == \"TPU\"}R160\n{elsif filament_type[0] == \"FLEX\"}R160\n{elsif filament_type[0] == \"PET\"}R170\n{elsif filament_type[0] == \"HIPS\"}R160\n{elsif filament_type[0] == \"NYLON\"}R200\n{else}R170; unknown filament type probe temp{endif}; start cooling to probe temp during wipe\nM106 S255 ; turn fan on to help drop temp\n; Use M206 below to adjust nozzle wipe position (Replace \"z_offset\" to adjust Z value)\n; X ~ (+)left/(-)right, Y ~ (+)front/(-)back, Z ~ (+)down/(-)up\nM206 X0 Y0 Z[z_offset] ; restoring offsets and adjusting offset if AST285 is enabled\nM117 Wiping Nozzle...;progress indicator on LCD\nG12; wiping sequence\nM206 X0 Y0 Z0 ; reseting stock nozzle position # # # CAUTION: changing this line can affect print quality # # #\nM107; turn off part cooling fan\nM104 {if filament_type[0] == \"PLA\"}R160\n{elsif filament_type[0] == \"ABS\"}R170\n{elsif filament_type[0] == \"ABS-GF\"}R170\n{elsif filament_type[0] == \"ASA\"}R170\n{elsif filament_type[0] == \"ASA-Aero\"}R170\n{elsif filament_type[0] == \"BVOH\"}R170\n{elsif filament_type[0] == \"EVA\"}R170\n{elsif filament_type[0] == \"PA\"}R200\n{elsif filament_type[0] == \"PA-CF\"}R200\n{elsif filament_type[0] == \"PA-GF\"}R170\n{elsif filament_type[0] == \"PA6-CF\"}R170\n{elsif filament_type[0] == \"PA11-CF\"}R200\n{elsif filament_type[0] == \"ASA-Aero\"}R170\n{elsif filament_type[0] == \"PC\"}R200\n{elsif filament_type[0] == \"PC-CF\"}R200\n{elsif filament_type[0] == \"PCTG\"}R180\n{elsif filament_type[0] == \"PE\"}R180\n{elsif filament_type[0] == \"PE-CF\"}R180\n{elsif filament_type[0] == \"PET-CF\"}R170\n{elsif filament_type[0] == \"PETG\"}R170\n{elsif filament_type[0] == \"PETG-CF10\"}R170\n{elsif filament_type[0] == \"PHA\"}R180\n{elsif filament_type[0] == \"PLA-AERO\"}R180\n{elsif filament_type[0] == \"PLA-CF\"}R180\n{elsif filament_type[0] == \"PP\"}R180\n{elsif filament_type[0] == \"PP-CF\"}R180\n{elsif filament_type[0] == \"PP-GF\"}R180\n{elsif filament_type[0] == \"PPS\"}R180\n{elsif filament_type[0] == \"PPS-CF\"}R180\n{elsif filament_type[0] == \"PVA\"}R160\n{elsif filament_type[0] == \"PVB\"}R160\n{elsif filament_type[0] == \"SBS\"}R180\n{elsif filament_type[0] == \"TPU\"}R160\n{elsif filament_type[0] == \"FLEX\"}R160\n{elsif filament_type[0] == \"PET\"}R170\n{elsif filament_type[0] == \"HIPS\"}R160\n{elsif filament_type[0] == \"NYLON\"}R200\n{else}R170; unknown filament type probe temp{endif}; set probe temp\nM117 Leveling Print Bed...; progress indicator message on LCD\nG29; start auto-leveling sequence\nM420 S1; enable leveling matrix\nG1 X5 Y15 Z10 F8000; move up off last probe point\nG4 S1; pause\nM400 wait for moves to finish\nM117 Final Heating... Please Wait.\nM109 S{first_layer_temperature[initial_tool]}; set extruder temp and wait\nM190 R{bed_temperature_initial_layer[initial_tool]}; get bed temping up during first layer\nG1 Z2 E0 F75; prime tiny bit of filament into the nozzle\nM300 T; play sound at start of first layer\nM117 Printing ...\n;Start G-Code End",
|
|
"machine_end_gcode": "M400; wait for moves to finish\nM140 S0; start cooling bed\nM107; fans off\nG91 ; relative positioning\nG1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z25 E-1 X20 Y20 F2000; move Z up a bit and retract filament even more\nM104 S{nozzle_temperature[0]} T0 ; T0 to print temp\nM104 S{nozzle_temperature[1]} T1 ; T1 to print temp\nG90 ; absolute positioning\nG0 X285 Y-30 F3000; move to cooling position\nG91 ; relative positioning\nM117 Purging for next print;progress indicator message\nT0\nM109 S{nozzle_temperature[0]}; wait for temp\nG92 E0; set extruder position to purge amount\nG1 E15 F75; purge\nM400; wait for purge\nM104 S0 ; T0 hotend off\nT1\nM109 S{nozzle_temperature[1]}; wait for temp\nG92 E0; set extruder position to purge amount\nG1 E15 F75; purge\nM400; wait for purge\nM104 S0 ; T1 hotend off\nT0\nM117 Cooling, please wait;progress indicator message\nM190 S0; cool off bed\nG0 Y280 F3000 ; present finished print\nM77; stop GLCD timer\nM18 X Y E; turn off x y and e axis\nG90 ; absolute positioning\nM117 Print complete; progress indicator message"
|
|
}
|