mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-17 02:22:17 +00:00
16727644bb
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
23 lines
9.6 KiB
JSON
23 lines
9.6 KiB
JSON
{
|
|
"type": "machine",
|
|
"name": "Lulzbot Taz Pro Dual 0.5 nozzle",
|
|
"inherits": "Lulzbot Taz Pro Common",
|
|
"from": "system",
|
|
"setting_id": "LZPD001",
|
|
"instantiation": "true",
|
|
"single_extruder_multi_material": "0",
|
|
"extruders_count": "2",
|
|
"printer_model": "Lulzbot Taz Pro Dual",
|
|
"default_print_profile": "0.25mm Standard @Lulzbot Taz Pro Dual",
|
|
"nozzle_diameter": [
|
|
"0.5",
|
|
"0.5"
|
|
],
|
|
"printer_settings_id": "LulzbotPro-Dual",
|
|
"default_filament_profile": [
|
|
"Lulzbot 2.85mm PLA"
|
|
],
|
|
"machine_start_gcode": ";This G-Code has been translated from Cura startup from CuraLE 4.13.10 to OrcaSlicer by Wrathernaut\nT0\nM82; absolute extrusion mode\nM73 P0; clear GLCD progress bar\nM75; start GLCD timer\nM107; disable fans\nG90; absolute positioning\nM420 S0; disable previous leveling matrix\nM140 S{bed_temperature_initial_layer[initial_tool]}; begin bed temping up (w)\nM104 {if filament_type[initial_tool] == \"PLA\"}S180\n{elsif filament_type[initial_tool] == \"ABS\"}S190\n{elsif filament_type[initial_tool] == \"ABS-GF\"}S190\n{elsif filament_type[initial_tool] == \"ASA\"}S190\n{elsif filament_type[initial_tool] == \"ASA-Aero\"}S190\n{elsif filament_type[initial_tool] == \"BVOH\"}S170\n{elsif filament_type[initial_tool] == \"EVA\"}S170\n{elsif filament_type[initial_tool] == \"PA\"}R220\n{elsif filament_type[initial_tool] == \"PA-CF\"}R220\n{elsif filament_type[initial_tool] == \"PA-GF\"}R220\n{elsif filament_type[initial_tool] == \"PA6-CF\"}R220\n{elsif filament_type[initial_tool] == \"PA11-CF\"}R220\n{elsif filament_type[initial_tool] == \"ASA-Aero\"}S170\n{elsif filament_type[initial_tool] == \"PC\"}R220\n{elsif filament_type[initial_tool] == \"PC-CF\"}R220\n{elsif filament_type[initial_tool] == \"PCTG\"}S180\n{elsif filament_type[initial_tool] == \"PE\"}S190\n{elsif filament_type[initial_tool] == \"PE-CF\"}S190\n{elsif filament_type[initial_tool] == \"PET-CF\"}S190\n{elsif filament_type[initial_tool] == \"PETG\"}S190\n{elsif filament_type[initial_tool] == \"PETG-CF10\"}S190\n{elsif filament_type[initial_tool] == \"PHA\"}S180\n{elsif filament_type[initial_tool] == \"PLA-AERO\"}S180\n{elsif filament_type[initial_tool] == \"PLA-CF\"}S180\n{elsif filament_type[initial_tool] == \"PP\"}S180\n{elsif filament_type[initial_tool] == \"PP-CF\"}S180\n{elsif filament_type[initial_tool] == \"PP-GF\"}S180\n{elsif filament_type[initial_tool] == \"PPS\"}S180\n{elsif filament_type[initial_tool] == \"PPS-CF\"}S180\n{elsif filament_type[initial_tool] == \"PVA\"}S180\n{elsif filament_type[initial_tool] == \"PVB\"}S180\n{elsif filament_type[initial_tool] == \"SBS\"}S180\n{elsif filament_type[initial_tool] == \"TPU\"}S180\n{elsif filament_type[initial_tool] == \"FLEX\"}S180\n{elsif filament_type[initial_tool] == \"PET\"}S170\n{elsif filament_type[initial_tool] == \"HIPS\"}S170\n{elsif filament_type[initial_tool] == \"NYLON\"}R220\n{else}S190; unknown filament type soften temp before homing Z\n{endif}G28; home\nG0 X50 Y25 Z10 F2000\nM117 Heating...\nM109 {if filament_type[0] == \"PLA\"}R180\n{elsif filament_type[0] == \"ABS\"}R190\n{elsif filament_type[0] == \"ABS-GF\"}R190\n{elsif filament_type[0] == \"ASA\"}R190\n{elsif filament_type[0] == \"ASA-Aero\"}R190\n{elsif filament_type[0] == \"BVOH\"}R170\n{elsif filament_type[0] == \"EVA\"}R170\n{elsif filament_type[0] == \"PA\"}R220\n{elsif filament_type[0] == \"PA-CF\"}R220\n{elsif filament_type[0] == \"PA-GF\"}R220\n{elsif filament_type[0] == \"PA6-CF\"}R220\n{elsif filament_type[0] == \"PA11-CF\"}R220\n{elsif filament_type[0] == \"ASA-Aero\"}R170\n{elsif filament_type[0] == \"PC\"}R220\n{elsif filament_type[0] == \"PC-CF\"}R220\n{elsif filament_type[0] == \"PCTG\"}R180\n{elsif filament_type[0] == \"PE\"}R190\n{elsif filament_type[0] == \"PE-CF\"}R190\n{elsif filament_type[0] == \"PET-CF\"}R190\n{elsif filament_type[0] == \"PETG\"}R190\n{elsif filament_type[0] == \"PETG-CF10\"}R190\n{elsif filament_type[0] == \"PHA\"}R180\n{elsif filament_type[0] == \"PLA-AERO\"}R180\n{elsif filament_type[0] == \"PLA-CF\"}R180\n{elsif filament_type[0] == \"PP\"}R180\n{elsif filament_type[0] == \"PP-CF\"}R180\n{elsif filament_type[0] == \"PP-GF\"}R180\n{elsif filament_type[0] == \"PPS\"}R180\n{elsif filament_type[0] == \"PPS-CF\"}R180\n{elsif filament_type[0] == \"PVA\"}R180\n{elsif filament_type[0] == \"PVB\"}R180\n{elsif filament_type[0] == \"SBS\"}R180\n{elsif filament_type[0] == \"TPU\"}R180\n{elsif filament_type[0] == \"FLEX\"}R180\n{elsif filament_type[0] == \"PET\"}R170\n{elsif filament_type[0] == \"HIPS\"}R170\n{elsif filament_type[0] == \"NYLON\"}R220\n{else}R190; unknown filament type soften temp before homing Z{endif}\nM82; set extruder to absolute mode\nG92 E0; set extruder to zero\nG1 E-7 F100; retract 7mm of filament on first extruder\nM106; turn on fans to speed cooling\nM117 Wiping...\nM109 {if filament_type[0] == \"PLA\"}R180\n{elsif filament_type[0] == \"ABS\"}R190\n{elsif filament_type[0] == \"ABS-GF\"}R190\n{elsif filament_type[0] == \"ASA\"}R190\n{elsif filament_type[0] == \"ASA-Aero\"}R190\n{elsif filament_type[0] == \"BVOH\"}R170\n{elsif filament_type[0] == \"EVA\"}R170\n{elsif filament_type[0] == \"PA\"}R220\n{elsif filament_type[0] == \"PA-CF\"}R220\n{elsif filament_type[0] == \"PA-GF\"}R220\n{elsif filament_type[0] == \"PA6-CF\"}R220\n{elsif filament_type[0] == \"PA11-CF\"}R220\n{elsif filament_type[0] == \"ASA-Aero\"}R170\n{elsif filament_type[0] == \"PC\"}R220\n{elsif filament_type[0] == \"PC-CF\"}R220\n{elsif filament_type[0] == \"PCTG\"}R190\n{elsif filament_type[0] == \"PE\"}R190\n{elsif filament_type[0] == \"PE-CF\"}R190\n{elsif filament_type[0] == \"PET-CF\"}R190\n{elsif filament_type[0] == \"PETG\"}R190\n{elsif filament_type[0] == \"PETG-CF10\"}R190\n{elsif filament_type[0] == \"PHA\"}R180\n{elsif filament_type[0] == \"PLA-AERO\"}R180\n{elsif filament_type[0] == \"PLA-CF\"}R180\n{elsif filament_type[0] == \"PP\"}R180\n{elsif filament_type[0] == \"PP-CF\"}R180\n{elsif filament_type[0] == \"PP-GF\"}R180\n{elsif filament_type[0] == \"PPS\"}R180\n{elsif filament_type[0] == \"PPS-CF\"}R180\n{elsif filament_type[0] == \"PVA\"}R180\n{elsif filament_type[0] == \"PVB\"}R180\n{elsif filament_type[0] == \"SBS\"}R180\n{elsif filament_type[0] == \"TPU\"}R180\n{elsif filament_type[0] == \"FLEX\"}R180\n{elsif filament_type[0] == \"PET\"}R170\n{elsif filament_type[0] == \"HIPS\"}R180\n{elsif filament_type[0] == \"NYLON\"}R220\n{else}R170; unknown filament type wipe temp{endif}\nM109 {if filament_type[0] == \"PLA\"}R160\n{elsif filament_type[0] == \"ABS\"}R170\n{elsif filament_type[0] == \"ABS-GF\"}R170\n{elsif filament_type[0] == \"ASA\"}R170\n{elsif filament_type[0] == \"ASA-Aero\"}R170\n{elsif filament_type[0] == \"BVOH\"}R170\n{elsif filament_type[0] == \"EVA\"}R170\n{elsif filament_type[0] == \"PA\"}R200\n{elsif filament_type[0] == \"PA-CF\"}R200\n{elsif filament_type[0] == \"PA-GF\"}R170\n{elsif filament_type[0] == \"PA6-CF\"}R170\n{elsif filament_type[0] == \"PA11-CF\"}R200\n{elsif filament_type[0] == \"ASA-Aero\"}R170\n{elsif filament_type[0] == \"PC\"}R200\n{elsif filament_type[0] == \"PC-CF\"}R200\n{elsif filament_type[0] == \"PCTG\"}R180\n{elsif filament_type[0] == \"PE\"}R180\n{elsif filament_type[0] == \"PE-CF\"}R180\n{elsif filament_type[0] == \"PET-CF\"}R170\n{elsif filament_type[0] == \"PETG\"}R170\n{elsif filament_type[0] == \"PETG-CF10\"}R170\n{elsif filament_type[0] == \"PHA\"}R180\n{elsif filament_type[0] == \"PLA-AERO\"}R180\n{elsif filament_type[0] == \"PLA-CF\"}R180\n{elsif filament_type[0] == \"PP\"}R180\n{elsif filament_type[0] == \"PP-CF\"}R180\n{elsif filament_type[0] == \"PP-GF\"}R180\n{elsif filament_type[0] == \"PPS\"}R180\n{elsif filament_type[0] == \"PPS-CF\"}R180\n{elsif filament_type[0] == \"PVA\"}R160\n{elsif filament_type[0] == \"PVB\"}R160\n{elsif filament_type[0] == \"SBS\"}R180\n{elsif filament_type[0] == \"TPU\"}R160\n{elsif filament_type[0] == \"FLEX\"}R160\n{elsif filament_type[0] == \"PET\"}R170\n{elsif filament_type[0] == \"HIPS\"}R160\n{elsif filament_type[0] == \"NYLON\"}R200\n{else}R170; unknown filament type probe temp{endif}; cool to probe temp\nG12; wipe sequence\nM107; turn off fan\nG29; probe sequence (for auto-leveling)\nM420 S1; enable leveling matrix\nT{initial_tool}; ensure we're using the first extruder\nM104 S{first_layer_temperature[initial_tool]}; set extruder temp\nG0 X5 Y15 Z10 F5000; move to start location\nM400; clear buffer\nM117 Heating...\nM109 R{first_layer_temperature[initial_tool]}; set extruder temp and waitnM190 R{bed_temperature_initial_layer[initial_tool]}; get bed temping up during first layer\nG1 Z2 E0 F75; raise head and 0 extruder\nM82; set to absolute mode\nM400; clear buffer\nM300 T; play sound at start of first layer\nM117 Printing ...\n;Start G-Code End",
|
|
"machine_end_gcode": "M400; wait for moves to finish\nM140 S0; start cooling bed\nM107; fans off\nG91 ; relative positioning\nG1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z25 E-1 X20 Y20 F2000; move Z up a bit and retract filament even more\nM104 S{nozzle_temperature[0]} T0 ; T0 to print temp\nM104 S{nozzle_temperature[1]} T1 ; T1 to print temp\nG90 ; absolute positioning\nG0 X285 Y-30 F3000; move to cooling position\nG91 ; relative positioning\nM117 Purging for next print;progress indicator message\nT0\nM109 S{nozzle_temperature[0]}; wait for temp\nG92 E0; set extruder position to purge amount\nG1 E15 F75; purge\nM400; wait for purge\nM104 S0 ; T0 hotend off\nT1\nM109 S{nozzle_temperature[1]}; wait for temp\nG92 E0; set extruder position to purge amount\nG1 E15 F75; purge\nM400; wait for purge\nM104 S0 ; T1 hotend off\nT0\nM117 Cooling, please wait;progress indicator message\nM190 S0; cool off bed\nG0 Y280 F3000 ; present finished print\nM77; stop GLCD timer\nM18 X Y E; turn off x y and e axis\nG90 ; absolute positioning\nM117 Print complete; progress indicator message"
|
|
}
|