mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-16 18:12:10 +00:00
16727644bb
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
113 lines
8.6 KiB
JSON
113 lines
8.6 KiB
JSON
{
|
|
"type": "machine",
|
|
"name": "Lulzbot Taz 6 0.5 nozzle",
|
|
"inherits": "fdm_machine_common",
|
|
"from": "system",
|
|
"setting_id": "LZ006",
|
|
"instantiation": "true",
|
|
"printer_model": "Lulzbot Taz 6",
|
|
"default_print_profile": "0.25mm Standard @Lulzbot Taz 6",
|
|
"nozzle_diameter": [
|
|
"0.5"
|
|
],
|
|
"printable_area": [
|
|
"0x0",
|
|
"280x0",
|
|
"280x280",
|
|
"0x280"
|
|
],
|
|
"printable_height": "250",
|
|
"nozzle_type": "undefine",
|
|
"auxiliary_fan": "0",
|
|
"emit_machine_limits_to_gcode": "0",
|
|
"machine_max_acceleration_extruding": [
|
|
"500",
|
|
"500"
|
|
],
|
|
"machine_max_acceleration_retracting": [
|
|
"1000",
|
|
"1000"
|
|
],
|
|
"machine_max_acceleration_travel": [
|
|
"1250",
|
|
"1250"
|
|
],
|
|
"machine_max_acceleration_x": [
|
|
"500",
|
|
"500"
|
|
],
|
|
"machine_max_acceleration_y": [
|
|
"500",
|
|
"500"
|
|
],
|
|
"machine_max_acceleration_z": [
|
|
"100",
|
|
"100"
|
|
],
|
|
"machine_max_speed_e": [
|
|
"60",
|
|
"60"
|
|
],
|
|
"machine_max_speed_x": [
|
|
"500",
|
|
"500"
|
|
],
|
|
"machine_max_speed_y": [
|
|
"500",
|
|
"500"
|
|
],
|
|
"machine_max_speed_z": [
|
|
"10",
|
|
"10"
|
|
],
|
|
"machine_max_jerk_e": [
|
|
"5",
|
|
"5"
|
|
],
|
|
"machine_max_jerk_x": [
|
|
"8",
|
|
"8"
|
|
],
|
|
"machine_max_jerk_y": [
|
|
"8",
|
|
"8"
|
|
],
|
|
"machine_max_jerk_z": [
|
|
"0.4",
|
|
"0.4"
|
|
],
|
|
"max_layer_height": [
|
|
"0.4"
|
|
],
|
|
"min_layer_height": [
|
|
"0.08"
|
|
],
|
|
"printer_settings_id": "Lulzbot",
|
|
"retraction_minimum_travel": [
|
|
"2"
|
|
],
|
|
"retract_before_wipe": [
|
|
"70%"
|
|
],
|
|
"retraction_length": [
|
|
"5"
|
|
],
|
|
"retract_length_toolchange": [
|
|
"1"
|
|
],
|
|
"deretraction_speed": [
|
|
"40"
|
|
],
|
|
"single_extruder_multi_material": "1",
|
|
"default_filament_profile": [
|
|
"Lulzbot 2.85mm PLA"
|
|
],
|
|
"machine_start_gcode": ";This G-Code has been translated from LulzBot's CuraLE (v4.13.10) startup GCODE for Taz 6 Single Extruder by Wrathernaut\nM73 P0; clear GLCD progress bar\nM75; start GLCD timer\nM107; disable fans\nM420 S; disable leveling matrix\nG90; absolute positioning\nM82; set extruder to absolute mode\nG92 E0; set extruder position to 0\nM140 S{bed_temperature_initial_layer[0]}; start bed heating up (w)\nG28 XY; home X and Y\nG1 X-19 Y258 F1000; move to safe homing position\nM109 {if filament_type[0] == \"PLA\"}R180\n{elsif filament_type[0] == \"ABS\"}R190\n{elsif filament_type[0] == \"ABS-GF\"}R190\n{elsif filament_type[0] == \"ASA\"}R190\n{elsif filament_type[0] == \"ASA-Aero\"}R190\n{elsif filament_type[0] == \"BVOH\"}R170\n{elsif filament_type[0] == \"EVA\"}R170\n{elsif filament_type[0] == \"PA\"}R220\n{elsif filament_type[0] == \"PA-CF\"}R220\n{elsif filament_type[0] == \"PA-GF\"}R220\n{elsif filament_type[0] == \"PA6-CF\"}R220\n{elsif filament_type[0] == \"PA11-CF\"}R220\n{elsif filament_type[0] == \"ASA-Aero\"}R170\n{elsif filament_type[0] == \"PC\"}R220\n{elsif filament_type[0] == \"PC-CF\"}R220\n{elsif filament_type[0] == \"PCTG\"}R180\n{elsif filament_type[0] == \"PE\"}R190\n{elsif filament_type[0] == \"PE-CF\"}R190\n{elsif filament_type[0] == \"PET-CF\"}R190\n{elsif filament_type[0] == \"PETG\"}R190\n{elsif filament_type[0] == \"PETG-CF10\"}R190\n{elsif filament_type[0] == \"PHA\"}R180\n{elsif filament_type[0] == \"PLA-AERO\"}R180\n{elsif filament_type[0] == \"PLA-CF\"}R180\n{elsif filament_type[0] == \"PP\"}R180\n{elsif filament_type[0] == \"PP-CF\"}R180\n{elsif filament_type[0] == \"PP-GF\"}R180\n{elsif filament_type[0] == \"PPS\"}R180\n{elsif filament_type[0] == \"PPS-CF\"}R180\n{elsif filament_type[0] == \"PVA\"}R180\n{elsif filament_type[0] == \"PVB\"}R180\n{elsif filament_type[0] == \"SBS\"}R180\n{elsif filament_type[0] == \"TPU\"}R180\n{elsif filament_type[0] == \"FLEX\"}R180\n{elsif filament_type[0] == \"PET\"}R170\n{elsif filament_type[0] == \"HIPS\"}R170\n{elsif filament_type[0] == \"NYLON\"}R220\n{else}R190; unknown filament type soften temp before homing Z{endif}\nG28 Z; home Z\nG1 E-15 F100; retract filament\nM109 {if filament_type[0] == \"PLA\"}R180\n{elsif filament_type[0] == \"ABS\"}R190\n{elsif filament_type[0] == \"ABS-GF\"}R190\n{elsif filament_type[0] == \"ASA\"}R190\n{elsif filament_type[0] == \"ASA-Aero\"}R190\n{elsif filament_type[0] == \"BVOH\"}R170\n{elsif filament_type[0] == \"EVA\"}R170\n{elsif filament_type[0] == \"PA\"}R220\n{elsif filament_type[0] == \"PA-CF\"}R220\n{elsif filament_type[0] == \"PA-GF\"}R220\n{elsif filament_type[0] == \"PA6-CF\"}R220\n{elsif filament_type[0] == \"PA11-CF\"}R220\n{elsif filament_type[0] == \"ASA-Aero\"}R170\n{elsif filament_type[0] == \"PC\"}R220\n{elsif filament_type[0] == \"PC-CF\"}R220\n{elsif filament_type[0] == \"PCTG\"}R190\n{elsif filament_type[0] == \"PE\"}R190\n{elsif filament_type[0] == \"PE-CF\"}R190\n{elsif filament_type[0] == \"PET-CF\"}R190\n{elsif filament_type[0] == \"PETG\"}R190\n{elsif filament_type[0] == \"PETG-CF10\"}R190\n{elsif filament_type[0] == \"PHA\"}R180\n{elsif filament_type[0] == \"PLA-AERO\"}R180\n{elsif filament_type[0] == \"PLA-CF\"}R180\n{elsif filament_type[0] == \"PP\"}R180\n{elsif filament_type[0] == \"PP-CF\"}R180\n{elsif filament_type[0] == \"PP-GF\"}R180\n{elsif filament_type[0] == \"PPS\"}R180\n{elsif filament_type[0] == \"PPS-CF\"}R180\n{elsif filament_type[0] == \"PVA\"}R180\n{elsif filament_type[0] == \"PVB\"}R180\n{elsif filament_type[0] == \"SBS\"}R180\n{elsif filament_type[0] == \"TPU\"}R180\n{elsif filament_type[0] == \"FLEX\"}R180\n{elsif filament_type[0] == \"PET\"}R170\n{elsif filament_type[0] == \"HIPS\"}R180\n{elsif filament_type[0] == \"NYLON\"}R220\n{else}R170; unknown filament type wipe temp{endif}\n;M206 X0 Y0 Z0; uncomment to adjust wipe position (+X ~ nozzle moves left)(+Y ~ nozzle moves forward)(+Z ~ nozzle moves down)\nG12; wiping sequence\nM206 X0 Y0 Z0; reseting stock nozzle position ### CAUTION: changing this line can affect print quality ###\nG1 Z10 F5000; raise nozzle after wipe\nM109 {if filament_type[0] == \"PLA\"}R160\n{elsif filament_type[0] == \"ABS\"}R170\n{elsif filament_type[0] == \"ABS-GF\"}R170\n{elsif filament_type[0] == \"ASA\"}R170\n{elsif filament_type[0] == \"ASA-Aero\"}R170\n{elsif filament_type[0] == \"BVOH\"}R170\n{elsif filament_type[0] == \"EVA\"}R170\n{elsif filament_type[0] == \"PA\"}R200\n{elsif filament_type[0] == \"PA-CF\"}R200\n{elsif filament_type[0] == \"PA-GF\"}R170\n{elsif filament_type[0] == \"PA6-CF\"}R170\n{elsif filament_type[0] == \"PA11-CF\"}R200\n{elsif filament_type[0] == \"ASA-Aero\"}R170\n{elsif filament_type[0] == \"PC\"}R200\n{elsif filament_type[0] == \"PC-CF\"}R200\n{elsif filament_type[0] == \"PCTG\"}R180\n{elsif filament_type[0] == \"PE\"}R180\n{elsif filament_type[0] == \"PE-CF\"}R180\n{elsif filament_type[0] == \"PET-CF\"}R170\n{elsif filament_type[0] == \"PETG\"}R170\n{elsif filament_type[0] == \"PETG-CF10\"}R170\n{elsif filament_type[0] == \"PHA\"}R180\n{elsif filament_type[0] == \"PLA-AERO\"}R180\n{elsif filament_type[0] == \"PLA-CF\"}R180\n{elsif filament_type[0] == \"PP\"}R180\n{elsif filament_type[0] == \"PP-CF\"}R180\n{elsif filament_type[0] == \"PP-GF\"}R180\n{elsif filament_type[0] == \"PPS\"}R180\n{elsif filament_type[0] == \"PPS-CF\"}R180\n{elsif filament_type[0] == \"PVA\"}R160\n{elsif filament_type[0] == \"PVB\"}R160\n{elsif filament_type[0] == \"SBS\"}R180\n{elsif filament_type[0] == \"TPU\"}R160\n{elsif filament_type[0] == \"FLEX\"}R160\n{elsif filament_type[0] == \"PET\"}R170\n{elsif filament_type[0] == \"HIPS\"}R160\n{elsif filament_type[0] == \"NYLON\"}R200\n{else}R170; unknown filament type probe temp{endif}\nG1 X-10 Y293 F4000; move above first probe point\nM204 S100; set probing acceleration\nG29; start auto-leveling sequence\nM420 S1; enable leveling matrix\nM204 S500; restore standard acceleration\nG1 X0 Y0 Z15 F5000; move up off last probe point\nG4 S1; pause\nM400; wait for moves to finish\nM117 Heating...; progress indicator message on LCD\nM109 R{nozzle_temperature_initial_layer[0]}; wait for extruder to reach printing temp (w)\nM190 R{bed_temperature_initial_layer[0]}; wait for bed to reach printing temp\nG1 Z2 E0 F75; prime tiny bit of filament into the nozzle\nM117 TAZ 6 Printing...; progress indicator message on LCD\n;Start G-Code End",
|
|
"machine_end_gcode": ";End G-Code Begin\nM400; wait for moves to finish\nM140 S0; start bed cooling\nM104 S0; disable hotend\nM107; disable fans\nG91; relative positioning\nG1 E-1 F300; filament retraction to release pressure\nG1 Z20 E-5 X-20 Y-20 F3000; lift up and retract even more filament\nG1 E6; re-prime extruder\nG90; absolute positioning\nG1 Y280 F3000; present finished print\nM77; stop GLCD timer\nM84; disable steppers\nG90; absolute positioning\nM117 Print Complete.; print complete message\n;End G-Code End",
|
|
"before_layer_change_gcode": "G92 E0; reset relative extrusion",
|
|
"layer_change_gcode": "; LAYER:{layer_num}\nM117 Layer: {layer_num +1} / [total_layer_count]",
|
|
"change_filament_gcode": "M400\nM600 B10 X115 Y-10 Z10\nM190 S{bed_temperature[0]}\nM109 S{temperature[0]}",
|
|
"machine_pause_gcode": "M600 B10",
|
|
"scan_first_layer": "0"
|
|
}
|