mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-17 02:22:17 +00:00
16727644bb
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
212 lines
5.0 KiB
JSON
212 lines
5.0 KiB
JSON
{
|
|
"type": "machine",
|
|
"name": "Thinker X400 0.4 nozzle",
|
|
"from": "system",
|
|
"setting_id": "GM003",
|
|
"instantiation": "true",
|
|
"printer_model": "Thinker X400",
|
|
"default_print_profile": "0.20mm Standard @Thinker X400",
|
|
"default_filament_profile": "Eryone PLA;Eryone ABS;Eryone ASA;Eryone PETG;Eryone Silk PLA;Eryone TPU;Eryone ABS-CF;Eryone ASA-CF;Eryone PA;Eryone PA-CF;Eryone PA-GF;Eryone PETG-CF;Eryone PLA-CF;Eryone PP;Eryone PP-CF;",
|
|
"auxiliary_fan": "0",
|
|
"bed_custom_model": "",
|
|
"bed_custom_texture": "",
|
|
"bed_exclude_area": [
|
|
"0x0"
|
|
],
|
|
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
|
"best_object_pos": "0.5,0.5",
|
|
"change_filament_gcode": "",
|
|
"cooling_tube_length": "5",
|
|
"cooling_tube_retraction": "91.5",
|
|
"deretraction_speed": [
|
|
"30"
|
|
],
|
|
"enable_filament_ramming": "1",
|
|
"extra_loading_move": "-2",
|
|
"extruder_clearance_height_to_lid": "135",
|
|
"extruder_clearance_height_to_rod": "40",
|
|
"extruder_clearance_radius": "85",
|
|
"extruder_colour": [
|
|
"#FCE94F"
|
|
],
|
|
"extruder_offset": [
|
|
"0x0"
|
|
],
|
|
"fan_kickstart": "0",
|
|
"fan_speedup_overhangs": "1",
|
|
"fan_speedup_time": "0",
|
|
"gcode_flavor": "klipper",
|
|
"high_current_on_filament_swap": "0",
|
|
"host_type": "octoprint",
|
|
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
|
"machine_end_gcode": "PRINT_END",
|
|
"machine_load_filament_time": "0",
|
|
"machine_max_acceleration_e": [
|
|
"5000",
|
|
"5000"
|
|
],
|
|
"machine_max_acceleration_extruding": [
|
|
"10000",
|
|
"20000"
|
|
],
|
|
"machine_max_acceleration_retracting": [
|
|
"5000",
|
|
"5000"
|
|
],
|
|
"machine_max_acceleration_travel": [
|
|
"12000",
|
|
"20000"
|
|
],
|
|
"machine_max_acceleration_x": [
|
|
"10000",
|
|
"20000"
|
|
],
|
|
"machine_max_acceleration_y": [
|
|
"10000",
|
|
"20000"
|
|
],
|
|
"machine_max_acceleration_z": [
|
|
"300",
|
|
"200"
|
|
],
|
|
"machine_max_jerk_e": [
|
|
"2.5",
|
|
"2.5"
|
|
],
|
|
"machine_max_jerk_x": [
|
|
"9",
|
|
"9"
|
|
],
|
|
"machine_max_jerk_y": [
|
|
"9",
|
|
"9"
|
|
],
|
|
"machine_max_jerk_z": [
|
|
"0.3",
|
|
"0.4"
|
|
],
|
|
"machine_max_speed_e": [
|
|
"30",
|
|
"25"
|
|
],
|
|
"machine_max_speed_x": [
|
|
"500",
|
|
"200"
|
|
],
|
|
"machine_max_speed_y": [
|
|
"500",
|
|
"200"
|
|
],
|
|
"machine_max_speed_z": [
|
|
"8",
|
|
"12"
|
|
],
|
|
"machine_min_extruding_rate": [
|
|
"0",
|
|
"0"
|
|
],
|
|
"machine_min_travel_rate": [
|
|
"0",
|
|
"0"
|
|
],
|
|
"machine_pause_gcode": "PAUSE",
|
|
"machine_start_gcode": "M117 Heating\nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nPRINT_START \nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting]\nM104 S0\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nM117 Heating\nM190 S[bed_temperature_initial_layer_single]\nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\n;QUAD_GANTRY_LEVEL\nCLEAN_N S=[first_layer_temperature] X=240 Y=-3 A=0 D=0.4\nM117 Quad Level\n_QUAD_GANTRY_LEVEL horizontal_move_z=10 retry_tolerance=1 LIFT_SPEED=5\nG28 Z\nM117 Quad Level\n_QUAD_GANTRY_LEVEL horizontal_move_z=5 retry_tolerance=0.05 LIFT_SPEED=5\nM117 Bed Mesh Level\nG1 X132.5 Y197.5\nG28 N\nBED_MESH_CALIBRATE\nM117 Heating\nG1 X275.0 Y0.0 Z0.3 F1500 ; move print head up\nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM117 .\nINTRO_LINE D=0.4 ;intro line with 0.4 mm nozzle",
|
|
"machine_unload_filament_time": "0",
|
|
"manual_filament_change": "0",
|
|
"max_layer_height": [
|
|
"0.32"
|
|
],
|
|
"min_layer_height": [
|
|
"0.08"
|
|
],
|
|
"nozzle_diameter": [
|
|
"0.4"
|
|
],
|
|
"nozzle_hrc": "0",
|
|
"nozzle_type": "hardened_steel",
|
|
"nozzle_volume": "0",
|
|
"parking_pos_retraction": "92",
|
|
"print_host": "192.168.2.2",
|
|
"print_host_webui": "",
|
|
"printable_area": [
|
|
"0x0",
|
|
"400x0",
|
|
"400x400",
|
|
"0x400"
|
|
],
|
|
"printable_height": "400",
|
|
"printer_notes": "",
|
|
"printer_settings_id": "Thinker X400 0.4 nozzle",
|
|
"printer_structure": "undefine",
|
|
"printer_technology": "FFF",
|
|
"printer_variant": "0.4",
|
|
"printhost_apikey": "",
|
|
"printhost_authorization_type": "key",
|
|
"printhost_cafile": "",
|
|
"printhost_password": "",
|
|
"printhost_port": "",
|
|
"printhost_ssl_ignore_revoke": "0",
|
|
"printhost_user": "",
|
|
"purge_in_prime_tower": "1",
|
|
"retract_before_wipe": [
|
|
"0%"
|
|
],
|
|
"retract_length_toolchange": [
|
|
"2"
|
|
],
|
|
"retract_lift_above": [
|
|
"0"
|
|
],
|
|
"retract_lift_below": [
|
|
"0"
|
|
],
|
|
"retract_lift_enforce": [
|
|
"All Surfaces"
|
|
],
|
|
"retract_restart_extra": [
|
|
"0"
|
|
],
|
|
"retract_restart_extra_toolchange": [
|
|
"0"
|
|
],
|
|
"retract_when_changing_layer": [
|
|
"1"
|
|
],
|
|
"retraction_length": [
|
|
"0.8"
|
|
],
|
|
"retraction_minimum_travel": [
|
|
"1"
|
|
],
|
|
"retraction_speed": [
|
|
"30"
|
|
],
|
|
"scan_first_layer": "0",
|
|
"silent_mode": "0",
|
|
"single_extruder_multi_material": "1",
|
|
"support_air_filtration": "1",
|
|
"support_chamber_temp_control": "1",
|
|
"template_custom_gcode": "",
|
|
"thumbnails": [
|
|
"250x250"
|
|
],
|
|
"thumbnails_format": "PNG",
|
|
"time_cost": "0",
|
|
"time_lapse_gcode": "",
|
|
"upward_compatible_machine": [],
|
|
"use_firmware_retraction": "0",
|
|
"use_relative_e_distances": "1",
|
|
"wipe": [
|
|
"1"
|
|
],
|
|
"wipe_distance": [
|
|
"2"
|
|
],
|
|
"z_hop": [
|
|
"0.3"
|
|
],
|
|
"z_hop_types": [
|
|
"Auto Lift"
|
|
]
|
|
}
|