mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-17 02:22:17 +00:00
16727644bb
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
113 lines
4.5 KiB
JSON
113 lines
4.5 KiB
JSON
{
|
|
"type": "machine",
|
|
"name": "Creality Ender-5 Max 0.4 nozzle",
|
|
"inherits": "fdm_creality_common",
|
|
"from": "system",
|
|
"setting_id": "GM001",
|
|
"instantiation": "true",
|
|
"printer_model": "Creality Ender-5 Max",
|
|
"gcode_flavor": "klipper",
|
|
"printer_structure": "i3",
|
|
"auxiliary_fan": "0",
|
|
"bbl_use_printhost": "0",
|
|
"bed_exclude_area": "0x0",
|
|
"bed_mesh_max": "99999,99999",
|
|
"bed_mesh_min": "-99999,-99999",
|
|
"bed_mesh_probe_distance": "50,50",
|
|
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
|
"best_object_pos": "0.5,0.5",
|
|
"change_filament_gcode": "PAUSE",
|
|
"cooling_tube_length": "0",
|
|
"cooling_tube_retraction": "0",
|
|
"creality_flush_time": "86.0",
|
|
"default_print_profile": "0.2mm Standard @Creality Ender-5 Max 0.4 nozzle",
|
|
"disable_m73": "0",
|
|
"emit_machine_limits_to_gcode": "1",
|
|
"enable_filament_ramming": "1",
|
|
"extra_loading_move": "0",
|
|
"extruder_clearance_height_to_lid": "120",
|
|
"extruder_clearance_height_to_rod": "35",
|
|
"extruder_clearance_radius": "85",
|
|
"fan_kickstart": "0",
|
|
"fan_speedup_overhangs": "1",
|
|
"fan_speedup_time": "0",
|
|
"high_current_on_filament_swap": "0",
|
|
"host_type": "octoprint",
|
|
"machine_LED_light_exist": "1",
|
|
"machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \n \nG1 Z5 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X395 Y395 F6000 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z",
|
|
"machine_load_filament_time": "11",
|
|
"machine_max_acceleration_e": "30000",
|
|
"machine_max_acceleration_extruding": "50000",
|
|
"machine_max_acceleration_retracting": "50000",
|
|
"machine_max_acceleration_travel": "50000",
|
|
"machine_max_acceleration_x": "50000",
|
|
"machine_max_acceleration_y": "50000",
|
|
"machine_max_acceleration_z": "1000",
|
|
"machine_max_jerk_e": "100",
|
|
"machine_max_jerk_x": "100",
|
|
"machine_max_jerk_y": "100",
|
|
"machine_max_jerk_z": "0.4",
|
|
"machine_max_speed_e": "1000",
|
|
"machine_max_speed_x": "1000",
|
|
"machine_max_speed_y": "1000",
|
|
"machine_max_speed_z": "30",
|
|
"machine_min_extruding_rate": "0,0",
|
|
"machine_min_travel_rate": "0,0",
|
|
"machine_pause_gcode": "PAUSE",
|
|
"machine_platform_motion_enable": "0",
|
|
"machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp \nG28 ;Home \n \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nG1 X-1.0 Y120 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-1.0 Y245.0 Z0.28 F1500.0 E7 ;Draw the first line \nG1 X-0.6 Y245.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-0.6 Y120 Z0.28 F1500.0 E15 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
|
|
"machine_unload_filament_time": "0",
|
|
"manual_filament_change": "1",
|
|
"nozzle_hrc": "0",
|
|
"nozzle_type": "brass",
|
|
"nozzle_volume": "0",
|
|
"parking_pos_retraction": "0",
|
|
"preferred_orientation": "0",
|
|
"prime_tower_position_type": "Middle Upper",
|
|
"printable_area": "0x0,400x0,400x400,0x400",
|
|
"printable_height": "400",
|
|
"printer_technology": "FFF",
|
|
"printer_variant": "0.4",
|
|
"printhost_authorization_type": "key",
|
|
"printhost_ssl_ignore_revoke": "0",
|
|
"purge_in_prime_tower": "1",
|
|
"scan_first_layer": "0",
|
|
"silent_mode": "0",
|
|
"single_extruder_multi_material": "1",
|
|
"support_air_filtration": "0",
|
|
"support_chamber_temp_control": "0",
|
|
"support_multi_bed_types": "1",
|
|
"thumbnails": "96x96,300x300",
|
|
"thumbnails_format": "PNG",
|
|
"time_cost": "0",
|
|
"use_firmware_retraction": "0",
|
|
"use_relative_e_distances": "1",
|
|
"z_offset": "0",
|
|
"default_filament_profile": [
|
|
"Creality Hyper PLA @Ender-5Max-all"
|
|
],
|
|
"deretraction_speed": "50",
|
|
"extruder_colour": "#FCE94F",
|
|
"extruder_offset": "0x0",
|
|
"max_layer_height": "0.36",
|
|
"min_layer_height": "0.08",
|
|
"nozzle_diameter": [
|
|
"0.4"
|
|
],
|
|
"retract_before_wipe": "100",
|
|
"retract_length_toolchange": "0",
|
|
"retract_lift_above": "0",
|
|
"retract_lift_below": "399",
|
|
"retract_lift_enforce": "All Surfaces",
|
|
"retract_restart_extra": "0",
|
|
"retract_restart_extra_toolchange": "0",
|
|
"retract_when_changing_layer": "1",
|
|
"retraction_length": "0.8",
|
|
"retraction_minimum_travel": "0.5",
|
|
"retraction_speed": "50",
|
|
"wipe": "1",
|
|
"wipe_distance": "1",
|
|
"z_hop": "0.4",
|
|
"z_hop_types": "Slope Lift"
|
|
}
|