mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-16 18:12:10 +00:00
16727644bb
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
128 lines
2.3 KiB
JSON
128 lines
2.3 KiB
JSON
{
|
|
"type": "filament",
|
|
"name": "Bambu PLA Matte @BBL X1",
|
|
"inherits": "Bambu PLA Matte @base",
|
|
"from": "system",
|
|
"setting_id": "GFSA05",
|
|
"instantiation": "true",
|
|
"filament_long_retractions_when_cut": [
|
|
"1",
|
|
"1"
|
|
],
|
|
"filament_max_volumetric_speed": [
|
|
"22",
|
|
"22"
|
|
],
|
|
"filament_retraction_distances_when_cut": [
|
|
"18",
|
|
"18"
|
|
],
|
|
"filament_flow_ratio": [
|
|
"0.98",
|
|
"0.98"
|
|
],
|
|
"filament_deretraction_speed": [
|
|
"nil",
|
|
"nil"
|
|
],
|
|
"filament_flush_temp": [
|
|
"0",
|
|
"0"
|
|
],
|
|
"filament_flush_volumetric_speed": [
|
|
"0",
|
|
"0"
|
|
],
|
|
"filament_ramming_volumetric_speed": [
|
|
"-1",
|
|
"-1"
|
|
],
|
|
"filament_retract_before_wipe": [
|
|
"nil",
|
|
"nil"
|
|
],
|
|
"filament_retract_restart_extra": [
|
|
"nil",
|
|
"nil"
|
|
],
|
|
"filament_retract_when_changing_layer": [
|
|
"nil",
|
|
"nil"
|
|
],
|
|
"filament_retraction_length": [
|
|
"nil",
|
|
"nil"
|
|
],
|
|
"filament_retraction_minimum_travel": [
|
|
"nil",
|
|
"nil"
|
|
],
|
|
"filament_retraction_speed": [
|
|
"nil",
|
|
"nil"
|
|
],
|
|
"filament_wipe": [
|
|
"nil",
|
|
"nil"
|
|
],
|
|
"filament_wipe_distance": [
|
|
"nil",
|
|
"nil"
|
|
],
|
|
"filament_z_hop": [
|
|
"nil",
|
|
"nil"
|
|
],
|
|
"filament_z_hop_types": [
|
|
"nil",
|
|
"nil"
|
|
],
|
|
"filament_extruder_variant": [
|
|
"Direct Drive Standard",
|
|
"Direct Drive High Flow"
|
|
],
|
|
"filament_pre_cooling_temperature": [
|
|
"0",
|
|
"0"
|
|
],
|
|
"filament_ramming_travel_time": [
|
|
"0",
|
|
"0"
|
|
],
|
|
"filament_adaptive_volumetric_speed": [
|
|
"0",
|
|
"0"
|
|
],
|
|
"long_retractions_when_ec": [
|
|
"0",
|
|
"0"
|
|
],
|
|
"nozzle_temperature": [
|
|
"220",
|
|
"220"
|
|
],
|
|
"nozzle_temperature_initial_layer": [
|
|
"220",
|
|
"220"
|
|
],
|
|
"retraction_distances_when_ec": [
|
|
"0",
|
|
"0"
|
|
],
|
|
"slow_down_layer_time": [
|
|
"8"
|
|
],
|
|
"volumetric_speed_coefficients": [
|
|
"0 0 0 0 0 0",
|
|
"0 0 0 0 0 0"
|
|
],
|
|
"compatible_printers": [
|
|
"Bambu Lab X1 0.4 nozzle",
|
|
"Bambu Lab X1 0.6 nozzle",
|
|
"Bambu Lab X1 0.8 nozzle"
|
|
],
|
|
"filament_start_gcode": [
|
|
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
|
]
|
|
}
|