juli/OrcaSlicer
1
1
Fork 0
mirror of https://github.com/OrcaSlicer/OrcaSlicer.git synced 2026-05-19 11:23:42 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
dependabot/github_actions/actions/github-script-9
OrcaSlicer/resources/profiles/Artillery/machine/Artillery M1 Pro 0.4 nozzle.json
Ian Bassi 16727644bb Reduce size by Json Fromatting (#13163) 
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces.
This effectively reduces the size by almost 20 MB.

| Current | New |
|---|---|
| 85.2 Mib | 67 Mib |

Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON.

> [!NOTE]
> Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
2026-04-15 22:58:12 +08:00

228 lines
8.4 KiB
JSON
Raw Permalink Blame History

{
"type": "machine",
"name": "Artillery M1 Pro 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM007",
"instantiation": "true",
"is_artillery": "1",
"emit_machine_limits_to_gcode": "1",
"layer_change_gcode": "G92 E0\n{if layer_num==2}\n\n;filter_fan\nM106 P3 S{during_print_exhaust_fan_speed[0]*255/100.0};\n\n;auxiliary_fan\nM106 P2 S{additional_cooling_fan_speed[0]*255/100.0}\n\n{endif}\n\n",
"machine_end_gcode": ";===== G-CODE START =====================\n;===== machine: M1 PRO =========================\n;===== date: 20250729 =====================\n\n;===== Raise Z-Axis =====================\nM400 ; wait for buffer to clear\nG90\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\n\n{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F300 ; Move print head up{endif} \nG90\nG1 X200 Y260 F21000\nG1 X200 Y275 F6000\nG1 X160 Y275 F6000\nG1 X137 Y275 F3000\nM400\nTIMELAPSE_TAKE_FRAME\n{if max_layer_z < 50}G1 Z50 F300 ; Move print head further up{endif}\n;===== Default Settings =====================\nM400\nM106 S255\nM141 S0\nM106 P1 S255\nM104 S160\nG4 P10000\nM109 S160\nM106 S0 ;turn off cool fan\nM141 S0 ;turn off PTC\nM106 P2 S0 ;turn off chamber fan\nM106 P1 S0 ;turn off PTC fan\nM106 P3 S0 ;turn off filter fan\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nSET_VELOCITY_LIMIT VELOCITY=500;\nSET_VELOCITY_LIMIT ACCEL=6000;\nSET_VELOCITY_LIMIT MINIMUM_CRUISE_RATIO=0.2;\nSET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY=5;\nG21; set units to millimeters\nM104 S0\nM140 S0\nM400\nM84 X Y Z E ; disable motors\nM400\n;===== G-CODE END =====================",
"machine_max_acceleration_extruding": [
"20000",
"1250"
],
"machine_max_acceleration_retracting": [
"5000",
"1250"
],
"machine_max_acceleration_x": [
"20000",
"1000"
],
"machine_max_acceleration_y": [
"20000",
"1000"
],
"machine_max_jerk_e": [
"2.5",
"2.5"
],
"machine_max_jerk_x": [
"9",
"10"
],
"machine_max_jerk_y": [
"9",
"10"
],
"machine_max_jerk_z": [
"3",
"0.4"
],
"machine_max_speed_e": [
"50",
"120"
],
"machine_max_speed_x": [
"700",
"200"
],
"machine_max_speed_y": [
"700",
"200"
],
"machine_max_speed_z": [
"20",
"12"
],
"machine_start_gcode": ";===== START G-CODE =====================\n;===== machine: M1 PRO =========================\n;===== size: X260 Y260 Z260 =====================\n;===== date: 20250708 =====================\n;===== Filament Temperature Configuration =====================\n;Nozzle_Preheat_Temp:140\n;Bed_Preheat_Temp:[bed_temperature_initial_layer_single]\n{if (nozzle_temperature_initial_layer[0] >250)};Filament_Common_Extrusion_Temp:[nozzle_temperature_initial_layer]{else};Filament_Common_Extrusion_Temp:250{endif}\n;Nozzle_Init_Layer_Temp:[nozzle_temperature_initial_layer]\n;Filament_Softening_Temp:[nozzle_temperature_range_low]\n;Chamber_Temp:{chamber_temperature[0]}\n\n;===== Default Settings =====================\nM106 S0 ;turn off cool fan\nM141 S0 ;turn off PTC\nM106 P2 S0 ;turn off chamber fan\nM106 P1 S0 ;turn off PTC fan\nM106 P3 S0 ;turn off filter fan\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nSET_VELOCITY_LIMIT VELOCITY=500;\nSET_VELOCITY_LIMIT ACCEL=6000;\nSET_VELOCITY_LIMIT MINIMUM_CRUISE_RATIO=0.2;\nSET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY=5;\nG21; set units to millimeters\nG90\n\n;===== Preheat While Zeroing =====================\nM106 P1 S153\n\nM140 S[bed_temperature_initial_layer_single];\n\n{if filament_type[initial_no_support_extruder]==\"ABS\"}\nM106 P1 S255\nM106 P2 S60\nG4 P5000\nM191 S47;\nM141 S{chamber_temperature[0]};\n{endif}\n\n{if filament_type[initial_no_support_extruder]==\"PC\"}\nM106 P1 S255\nM106 P2 S60\nG4 P5000\nM191 S47;\nM141 S{chamber_temperature[0]};\n{endif}\n\n{if filament_type[initial_no_support_extruder]==\"ASA\"}\nM106 P1 S255\nM106 P2 S60\nG4 P5000\nM191 S47;\nM141 S{chamber_temperature[0]};\n{endif}\n\n{if filament_type[initial_no_support_extruder]==\"PA\"}\nM106 P1 S255\nM106 P2 S60\nG4 P5000\nM191 S47;\nM141 S{chamber_temperature[0]};\n{endif}\n\n{if filament_type[initial_no_support_extruder]==\"PA-CF\"}\nM106 P1 S255\nM106 P2 S60\nG4 P5000\nM191 S47;\nM141 S{chamber_temperature[0]};\n{endif}\n\nM106 P2 S0\nM106 S0;\nG4 P500\n\n;===== Wait heating =====================\nG28\nG1 X20 Y2 Z0 F18000\n\n;===== Set Print Temperature =====================\nM106 S120;\nG4 P500\nM104 S[first_layer_temperature];\n\n{if (bed_temperature_initial_layer_single >0)}\nM190 S[bed_temperature_initial_layer_single];\n{else}\nM140 S[bed_temperature_initial_layer_single];\n{endif}\n\nM109 S[first_layer_temperature];\nM106 S0;\nG4 P500\n\n;===== Wipe Nozzle Extrude Line =====================\nG1 X20 Y2 Z0 F18000\nM400\n\nG92 E0\nG0 E4;\nM400\n\nG92 E0\nG1 X240 Y2 Z0.2 F1800.0 E11.0;\n\nG92 E0\nG1 X240 Y10 Z0.2 F1800.0 E1;\n\nG92 E0\nG1 X239.5\nG0 E0.2\n\nG92 E0\nG0 Y2.5 E0.125\n\nG92 E0\nG1 X20 F1800.0 E11;\n\nM400\nG92 E0\nG1 Z0.6 F600\nM400\n\nG1 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} F9000\nM400\n\n;===== END G-CODE =====================\n\n\n",
"print_host": "192.168.3.29",
"printable_area": [
"0x0",
"260x0",
"260x260",
"0x260"
],
"printer_settings_id": "Artillery M1 Pro 0.4 nozzle",
"retraction_length": [
"0.8"
],
"z_hop": [
"0.6"
],
"printer_model": "Artillery M1 Pro",
"nozzle_diameter": [
"0.4"
],
"default_filament_profile": [
"Artillery PLA Basic"
],
"adaptive_bed_mesh_margin": "0",
"auxiliary_fan": "1",
"bbl_use_printhost": "0",
"bed_custom_model": "",
"bed_custom_texture": "",
"bed_exclude_area": [
"0x0"
],
"bed_mesh_max": "99999,99999",
"bed_mesh_min": "-99999,-99999",
"bed_mesh_probe_distance": "50,50",
"before_layer_change_gcode": "\n",
"best_object_pos": "0.5,0.5",
"change_extrusion_role_gcode": "",
"change_filament_gcode": "G1 E-2 F2400\nG2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000\nT[next_extruder]",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"default_print_profile": "0.20mm Standard @Artillery Genius",
"deretraction_speed": [
"40"
],
"disable_m73": "0",
"enable_filament_ramming": "0",
"extra_loading_move": "0",
"extruder_clearance_height_to_lid": "140",
"extruder_clearance_height_to_rod": "36",
"extruder_clearance_radius": "65",
"extruder_colour": [
"#018001"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"gcode_flavor": "klipper",
"head_wrap_detect_zone": [],
"high_current_on_filament_swap": "0",
"machine_load_filament_time": "0",
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_travel": [
"1000",
"1250"
],
"machine_max_acceleration_z": [
"500",
"200"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"machine_pause_gcode": "M600",
"machine_unload_filament_time": "0",
"manual_filament_change": "0",
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"nozzle_hrc": "0",
"nozzle_type": "hardened_steel",
"nozzle_volume": "0",
"parking_pos_retraction": "0",
"preferred_orientation": "0",
"print_host_webui": "",
"printable_height": "260",
"printer_notes": "",
"printer_structure": "undefine",
"printer_technology": "FFF",
"printer_variant": "0.4",
"printhost_apikey": "",
"printhost_authorization_type": "key",
"printhost_cafile": "",
"printhost_password": "",
"printhost_port": "",
"printhost_ssl_ignore_revoke": "0",
"printhost_user": "",
"printing_by_object_gcode": "",
"purge_in_prime_tower": "0",
"retract_before_wipe": [
"70%"
],
"retract_length_toolchange": [
"0"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"0"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"40"
],
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "1",
"support_chamber_temp_control": "1",
"support_multi_bed_types": "1",
"template_custom_gcode": "",
"thumbnails": [
"300x300"
],
"thumbnails_format": "PNG",
"time_cost": "0",
"upward_compatible_machine": [],
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"wipe": [
"1"
],
"wipe_distance": [
"2"
],
"z_hop_types": [
"Slope Lift"
],
"z_offset": "0",
"time_lapse_gcode": "TIMELAPSE_TAKE_FRAME"
}
Reference in New Issue View Git Blame Copy Permalink