mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-18 19:12:17 +00:00
16727644bb
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
119 lines
2.7 KiB
JSON
119 lines
2.7 KiB
JSON
{
|
|
"type": "machine",
|
|
"name": "Anycubic Kobra Plus 0.4 nozzle",
|
|
"inherits": "fdm_machine_common",
|
|
"from": "system",
|
|
"setting_id": "GM001",
|
|
"instantiation": "true",
|
|
"printer_model": "Anycubic Kobra Plus",
|
|
"default_print_profile": "0.20mm Standard @Anycubic KobraPlus",
|
|
"nozzle_diameter": [
|
|
"0.4"
|
|
],
|
|
"printable_area": [
|
|
"0x0",
|
|
"300x0",
|
|
"300x300",
|
|
"0x300"
|
|
],
|
|
"printable_height": "350",
|
|
"nozzle_type": "undefine",
|
|
"auxiliary_fan": "0",
|
|
"machine_max_acceleration_e": [
|
|
"3000",
|
|
"5000"
|
|
],
|
|
"machine_max_acceleration_extruding": [
|
|
"4000",
|
|
"1250"
|
|
],
|
|
"machine_max_acceleration_retracting": [
|
|
"1000",
|
|
"1250"
|
|
],
|
|
"machine_max_acceleration_travel": [
|
|
"4000",
|
|
"1250"
|
|
],
|
|
"machine_max_acceleration_x": [
|
|
"700",
|
|
"960"
|
|
],
|
|
"machine_max_acceleration_y": [
|
|
"600",
|
|
"960"
|
|
],
|
|
"machine_max_acceleration_z": [
|
|
"100",
|
|
"200"
|
|
],
|
|
"machine_max_speed_e": [
|
|
"60",
|
|
"120"
|
|
],
|
|
"machine_max_speed_x": [
|
|
"300",
|
|
"100"
|
|
],
|
|
"machine_max_speed_y": [
|
|
"300",
|
|
"100"
|
|
],
|
|
"machine_max_speed_z": [
|
|
"40",
|
|
"12"
|
|
],
|
|
"machine_max_jerk_e": [
|
|
"5",
|
|
"4.5"
|
|
],
|
|
"machine_max_jerk_x": [
|
|
"20",
|
|
"8"
|
|
],
|
|
"machine_max_jerk_y": [
|
|
"20",
|
|
"8"
|
|
],
|
|
"machine_max_jerk_z": [
|
|
"0.3",
|
|
"0.4"
|
|
],
|
|
"max_layer_height": [
|
|
"0.3"
|
|
],
|
|
"min_layer_height": [
|
|
"0.15"
|
|
],
|
|
"printer_settings_id": "Anycubic",
|
|
"retraction_minimum_travel": [
|
|
"5"
|
|
],
|
|
"retract_before_wipe": [
|
|
"70%"
|
|
],
|
|
"retraction_length": [
|
|
"6"
|
|
],
|
|
"retract_length_toolchange": [
|
|
"4"
|
|
],
|
|
"retraction_speed": [
|
|
"40"
|
|
],
|
|
"deretraction_speed": [
|
|
"40"
|
|
],
|
|
"single_extruder_multi_material": "1",
|
|
"change_filament_gcode": "M600",
|
|
"machine_pause_gcode": "M601",
|
|
"default_filament_profile": [
|
|
"Anycubic Generic PLA"
|
|
],
|
|
"machine_start_gcode": "M104 S140;start the nozzle preheat and don't wait\nG21;metric values\nG90;absolute positioning\nM82;set extruder to absolute mode\nM107;start with the fan off\nG28;home all\nM190 S[bed_temperature_initial_layer_single] ; set wait for bed temp\nM355 S1;turn on the case light\nM109 S[nozzle_temperature_initial_layer]; wait for extruder temp\nG1 Z15.0 F1000 ;move the nozzle up 15mm\nG92 E0;zero the extruded length\nG1 F100 E60;extrude 60mm of feed stock\nG92 E0;zero the extruded length again",
|
|
"machine_end_gcode": "M104 S0;extruder heater off\nM140 S0;heated bed heater off (if you have it)\nG91;relative positioning\nG1 Z+10 F3600 ;move Z up a bit\nG90;absolute positioning\nG1 X10 F3000; get the head off the bed\nG1 F3000 Y400 ;kick the bed out\nM84;steppers off\nM355 S0;turn off the case light",
|
|
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;G92 E0.0\n;[layer_z]\n\n",
|
|
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
|
"scan_first_layer": "0"
|
|
}
|