mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-19 19:33:47 +00:00
16727644bb
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
229 lines
5.5 KiB
JSON
229 lines
5.5 KiB
JSON
{
|
|
"type": "machine",
|
|
"name": "Anycubic Kobra 2 Neo 0.4 nozzle",
|
|
"inherits": "fdm_machine_common",
|
|
"from": "system",
|
|
"setting_id": "GM005",
|
|
"instantiation": "true",
|
|
"printer_technology": "FFF",
|
|
"printer_settings_id": "Anycubic Kobra 2 Neo 0.4 nozzle",
|
|
"printer_model": "Anycubic Kobra 2 Neo",
|
|
"printer_variant": "0.4",
|
|
"nozzle_diameter": [
|
|
"0.4"
|
|
],
|
|
"default_print_profile": "0.20mm Standard @Anycubic Kobra 2 Neo 0.4 nozzle",
|
|
"default_filament_profile": [
|
|
"Anycubic PLA @Anycubic Kobra 2 Neo 0.4 nozzle"
|
|
],
|
|
"disable_m73": "1",
|
|
"gcode_flavor": "marlin2",
|
|
"printable_area": [
|
|
"0x0",
|
|
"220x0",
|
|
"220x220",
|
|
"0x220"
|
|
],
|
|
"printable_height": "250",
|
|
"thumbnails": [
|
|
"230x110"
|
|
],
|
|
"thumbnails_format": "PNG",
|
|
"adaptive_bed_mesh_margin": "0",
|
|
"auxiliary_fan": "0",
|
|
"bbl_use_printhost": "0",
|
|
"bed_custom_model": "",
|
|
"bed_custom_texture": "",
|
|
"bed_exclude_area": [
|
|
"0x0"
|
|
],
|
|
"bed_mesh_max": "0,0",
|
|
"bed_mesh_min": "0,0",
|
|
"bed_mesh_probe_distance": "0,0",
|
|
"before_layer_change_gcode": "G92 E0 ; zero the extruded length again\n; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm",
|
|
"best_object_pos": "0.5,0.5",
|
|
"change_extrusion_role_gcode": "",
|
|
"change_filament_gcode": "",
|
|
"cooling_tube_length": "0",
|
|
"cooling_tube_retraction": "0",
|
|
"deretraction_speed": [
|
|
"0"
|
|
],
|
|
"emit_machine_limits_to_gcode": "1",
|
|
"enable_filament_ramming": "0",
|
|
"enable_long_retraction_when_cut": "0",
|
|
"extra_loading_move": "0",
|
|
"extruder_clearance_height_to_lid": "20",
|
|
"extruder_clearance_height_to_rod": "20",
|
|
"extruder_clearance_radius": "20",
|
|
"extruder_colour": [
|
|
"#FF4D4F"
|
|
],
|
|
"extruder_offset": [
|
|
"0x0"
|
|
],
|
|
"fan_kickstart": "0",
|
|
"fan_speedup_overhangs": "1",
|
|
"fan_speedup_time": "0",
|
|
"head_wrap_detect_zone": [],
|
|
"high_current_on_filament_swap": "0",
|
|
"host_type": "octoprint",
|
|
"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
|
|
"long_retractions_when_cut": [
|
|
"0"
|
|
],
|
|
"machine_end_gcode": "M140 S0; Heatbed off\nM107; Fan off \nG91; relative positioning \nM83 ; extruder relative mode\nG1 E-3 F3000 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 F3000 ;move Z up a bit and retract filament even more\nM104 S0; Extruder off\nG28 X Y;move X/Y to min endstops, so the head is out of the way\nG90; absolute positioning \nG1 Y220 F3000\nM84 ;steppers off\nM300 S1318 P266",
|
|
"machine_load_filament_time": "42",
|
|
"machine_max_acceleration_e": [
|
|
"2000",
|
|
"2000"
|
|
],
|
|
"machine_max_acceleration_extruding": [
|
|
"2000",
|
|
"2000"
|
|
],
|
|
"machine_max_acceleration_retracting": [
|
|
"2000",
|
|
"2000"
|
|
],
|
|
"machine_max_acceleration_travel": [
|
|
"20000",
|
|
"20000"
|
|
],
|
|
"machine_max_acceleration_x": [
|
|
"2000",
|
|
"2000"
|
|
],
|
|
"machine_max_acceleration_y": [
|
|
"2000",
|
|
"2000"
|
|
],
|
|
"machine_max_acceleration_z": [
|
|
"800",
|
|
"800"
|
|
],
|
|
"machine_max_jerk_e": [
|
|
"5",
|
|
"5"
|
|
],
|
|
"machine_max_jerk_x": [
|
|
"10",
|
|
"10"
|
|
],
|
|
"machine_max_jerk_y": [
|
|
"10",
|
|
"10"
|
|
],
|
|
"machine_max_jerk_z": [
|
|
"2",
|
|
"2"
|
|
],
|
|
"machine_max_speed_e": [
|
|
"100",
|
|
"100"
|
|
],
|
|
"machine_max_speed_x": [
|
|
"300",
|
|
"300"
|
|
],
|
|
"machine_max_speed_y": [
|
|
"300",
|
|
"300"
|
|
],
|
|
"machine_max_speed_z": [
|
|
"8",
|
|
"8"
|
|
],
|
|
"machine_min_extruding_rate": [
|
|
"0",
|
|
"0"
|
|
],
|
|
"machine_min_travel_rate": [
|
|
"0",
|
|
"0"
|
|
],
|
|
"machine_pause_gcode": "M601",
|
|
"machine_start_gcode": "G21 ; metric values\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28; move X/Y/Z to min endstops\nM420 S1\nM300 S1318 P266\nG1 Z5 F5000 ; lift nozzle\nG1 X0 Y0 F3000\nG1 Z0.3; lift nozzle a bit\nG92 E0 ; zero after lift\nG1 X10 Y5 F1800 ; move to purge line start position\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG1 X60 Y5 E20 F500 ; Extrude 20mm of filament in a 5cm line. \nG92 E0 ; zero the extruded length again \nG1 E-4.5 F4000 ; Retract a little \nG92 E0 ; zero the extruded length again\nG1 X120 F4000 ; Quickly wipe away from the filament line\nM117 Printing... ; Display status message",
|
|
"machine_unload_filament_time": "0",
|
|
"manual_filament_change": "0",
|
|
"max_layer_height": [
|
|
"0.28"
|
|
],
|
|
"min_layer_height": [
|
|
"0.08"
|
|
],
|
|
"nozzle_height": "4",
|
|
"nozzle_hrc": "0",
|
|
"nozzle_type": "brass",
|
|
"nozzle_volume": "0",
|
|
"parking_pos_retraction": "0",
|
|
"preferred_orientation": "0",
|
|
"printer_notes": "",
|
|
"printer_structure": "i3",
|
|
"printhost_authorization_type": "key",
|
|
"printhost_ssl_ignore_revoke": "0",
|
|
"printing_by_object_gcode": "",
|
|
"purge_in_prime_tower": "0",
|
|
"retract_before_wipe": [
|
|
"70%"
|
|
],
|
|
"retract_length_toolchange": [
|
|
"0"
|
|
],
|
|
"retract_lift_above": [
|
|
"0.3"
|
|
],
|
|
"retract_lift_below": [
|
|
"258"
|
|
],
|
|
"retract_lift_enforce": [
|
|
"All Surfaces"
|
|
],
|
|
"retract_restart_extra": [
|
|
"0"
|
|
],
|
|
"retract_restart_extra_toolchange": [
|
|
"0"
|
|
],
|
|
"retract_when_changing_layer": [
|
|
"1"
|
|
],
|
|
"retraction_distances_when_cut": [
|
|
"18"
|
|
],
|
|
"retraction_length": [
|
|
"2.5"
|
|
],
|
|
"retraction_minimum_travel": [
|
|
"1"
|
|
],
|
|
"retraction_speed": [
|
|
"100"
|
|
],
|
|
"scan_first_layer": "0",
|
|
"silent_mode": "0",
|
|
"single_extruder_multi_material": "1",
|
|
"support_air_filtration": "1",
|
|
"support_chamber_temp_control": "1",
|
|
"support_multi_bed_types": "0",
|
|
"template_custom_gcode": "",
|
|
"time_cost": "0",
|
|
"time_lapse_gcode": "",
|
|
"upward_compatible_machine": [],
|
|
"use_firmware_retraction": "0",
|
|
"use_relative_e_distances": "1",
|
|
"wipe": [
|
|
"1"
|
|
],
|
|
"wipe_distance": [
|
|
"1"
|
|
],
|
|
"z_hop": [
|
|
"0"
|
|
],
|
|
"z_hop_types": [
|
|
"Auto Lift"
|
|
],
|
|
"z_offset": "0"
|
|
}
|