mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-19 19:33:47 +00:00
16727644bb
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
225 lines
5.6 KiB
JSON
225 lines
5.6 KiB
JSON
{
|
|
"type": "machine",
|
|
"name": "Anycubic Kobra 2 Max 0.4 nozzle",
|
|
"inherits": "fdm_machine_common",
|
|
"from": "system",
|
|
"setting_id": "GM003",
|
|
"instantiation": "true",
|
|
"printer_technology": "FFF",
|
|
"printer_settings_id": "Anycubic Kobra 2 Max 0.4 nozzle",
|
|
"printer_model": "Anycubic Kobra 2 Max",
|
|
"printer_variant": "0.4",
|
|
"nozzle_diameter": [
|
|
"0.4"
|
|
],
|
|
"default_print_profile": "0.20mm Standard @Anycubic Kobra 2 Max 0.4 nozzle",
|
|
"default_filament_profile": [
|
|
"Anycubic PLA @Anycubic Kobra 2 Max 0.4 nozzle"
|
|
],
|
|
"disable_m73": "1",
|
|
"gcode_flavor": "klipper",
|
|
"printable_area": [
|
|
"0x0",
|
|
"420x0",
|
|
"420x420",
|
|
"0x420"
|
|
],
|
|
"printable_height": "500",
|
|
"thumbnails": [
|
|
"230x110"
|
|
],
|
|
"thumbnails_format": "PNG",
|
|
"adaptive_bed_mesh_margin": "0",
|
|
"auxiliary_fan": "0",
|
|
"bbl_use_printhost": "0",
|
|
"bed_custom_model": "",
|
|
"bed_custom_texture": "",
|
|
"bed_exclude_area": [],
|
|
"bed_mesh_max": "99999,99999",
|
|
"bed_mesh_min": "-99999,-99999",
|
|
"bed_mesh_probe_distance": "50,50",
|
|
"before_layer_change_gcode": "",
|
|
"best_object_pos": "0.5,0.5",
|
|
"change_extrusion_role_gcode": "",
|
|
"change_filament_gcode": "",
|
|
"cooling_tube_length": "0",
|
|
"cooling_tube_retraction": "0",
|
|
"deretraction_speed": [
|
|
"30"
|
|
],
|
|
"emit_machine_limits_to_gcode": "1",
|
|
"enable_filament_ramming": "0",
|
|
"extra_loading_move": "0",
|
|
"extruder_clearance_height_to_lid": "256",
|
|
"extruder_clearance_height_to_rod": "25",
|
|
"extruder_clearance_radius": "73",
|
|
"extruder_colour": [
|
|
"#018001"
|
|
],
|
|
"extruder_offset": [
|
|
"0x0"
|
|
],
|
|
"fan_kickstart": "0",
|
|
"fan_speedup_overhangs": "1",
|
|
"fan_speedup_time": "0",
|
|
"head_wrap_detect_zone": [
|
|
"226x224",
|
|
"256x224",
|
|
"256x256",
|
|
"226x256"
|
|
],
|
|
"high_current_on_filament_swap": "0",
|
|
"host_type": "octoprint",
|
|
"layer_change_gcode": "; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change",
|
|
"long_retractions_when_cut": [
|
|
"0"
|
|
],
|
|
"machine_end_gcode": "{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.85} F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+70, max_print_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{max_print_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84; disable motors ; disable stepper motors",
|
|
"machine_load_filament_time": "25",
|
|
"machine_max_acceleration_e": [
|
|
"10000",
|
|
"10000"
|
|
],
|
|
"machine_max_acceleration_extruding": [
|
|
"10000",
|
|
"10000"
|
|
],
|
|
"machine_max_acceleration_retracting": [
|
|
"10000",
|
|
"10000"
|
|
],
|
|
"machine_max_acceleration_travel": [
|
|
"9000",
|
|
"9000"
|
|
],
|
|
"machine_max_acceleration_x": [
|
|
"10000",
|
|
"10000"
|
|
],
|
|
"machine_max_acceleration_y": [
|
|
"10000",
|
|
"10000"
|
|
],
|
|
"machine_max_acceleration_z": [
|
|
"5000",
|
|
"5000"
|
|
],
|
|
"machine_max_jerk_e": [
|
|
"20",
|
|
"20"
|
|
],
|
|
"machine_max_jerk_x": [
|
|
"20",
|
|
"20"
|
|
],
|
|
"machine_max_jerk_y": [
|
|
"20",
|
|
"20"
|
|
],
|
|
"machine_max_jerk_z": [
|
|
"8",
|
|
"8"
|
|
],
|
|
"machine_max_speed_e": [
|
|
"80",
|
|
"80"
|
|
],
|
|
"machine_max_speed_x": [
|
|
"500",
|
|
"500"
|
|
],
|
|
"machine_max_speed_y": [
|
|
"500",
|
|
"500"
|
|
],
|
|
"machine_max_speed_z": [
|
|
"16",
|
|
"16"
|
|
],
|
|
"machine_min_extruding_rate": [
|
|
"0",
|
|
"0"
|
|
],
|
|
"machine_min_travel_rate": [
|
|
"0",
|
|
"0"
|
|
],
|
|
"machine_pause_gcode": "M601",
|
|
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; move X/Y/Z to min endstops\nG1 Z0.28 ; lift nozzle a bit \nG92 E0 \nG1 Y3 F2400 ; zero the extruded length \nG1 X180 E40 F500 ; Extrude 25mm of filament in a 5cm line. \nG92 E0 ; zero the extruded length again \nG1 E-2 F3000 ; Retract a little \nG1 X181 F4000 ; Quickly wipe away from the filament line\nM117\nM900 K0.07",
|
|
"machine_unload_filament_time": "29",
|
|
"manual_filament_change": "0",
|
|
"max_layer_height": [
|
|
"0.28"
|
|
],
|
|
"min_layer_height": [
|
|
"0.08"
|
|
],
|
|
"nozzle_hrc": "0",
|
|
"nozzle_type": "brass",
|
|
"nozzle_volume": "117",
|
|
"parking_pos_retraction": "0",
|
|
"preferred_orientation": "0",
|
|
"printer_notes": "",
|
|
"printer_structure": "i3",
|
|
"printing_by_object_gcode": "",
|
|
"purge_in_prime_tower": "0",
|
|
"retract_before_wipe": [
|
|
"0%"
|
|
],
|
|
"retract_length_toolchange": [
|
|
"2"
|
|
],
|
|
"retract_lift_above": [
|
|
"0"
|
|
],
|
|
"retract_lift_below": [
|
|
"255"
|
|
],
|
|
"retract_lift_enforce": [
|
|
"All Surfaces"
|
|
],
|
|
"retract_restart_extra": [
|
|
"0"
|
|
],
|
|
"retract_restart_extra_toolchange": [
|
|
"0"
|
|
],
|
|
"retract_when_changing_layer": [
|
|
"1"
|
|
],
|
|
"retraction_length": [
|
|
"1.5"
|
|
],
|
|
"retraction_minimum_travel": [
|
|
"1"
|
|
],
|
|
"retraction_speed": [
|
|
"30"
|
|
],
|
|
"scan_first_layer": "0",
|
|
"silent_mode": "0",
|
|
"single_extruder_multi_material": "1",
|
|
"support_air_filtration": "0",
|
|
"support_chamber_temp_control": "0",
|
|
"support_multi_bed_types": "0",
|
|
"template_custom_gcode": "",
|
|
"time_cost": "0",
|
|
"time_lapse_gcode": "",
|
|
"upward_compatible_machine": [],
|
|
"use_firmware_retraction": "0",
|
|
"use_relative_e_distances": "0",
|
|
"wipe": [
|
|
"1"
|
|
],
|
|
"wipe_distance": [
|
|
"1"
|
|
],
|
|
"z_hop": [
|
|
"0"
|
|
],
|
|
"z_hop_types": [
|
|
"Auto Lift"
|
|
],
|
|
"z_offset": "0"
|
|
}
|