mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-18 11:02:08 +00:00
16727644bb
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
113 lines
3.8 KiB
JSON
113 lines
3.8 KiB
JSON
{
|
|
"type": "machine",
|
|
"name": "Anycubic 4Max Pro 2 0.4 nozzle",
|
|
"inherits": "fdm_machine_common",
|
|
"from": "system",
|
|
"setting_id": "GM001",
|
|
"instantiation": "true",
|
|
"printer_model": "Anycubic 4Max Pro 2",
|
|
"default_print_profile": "0.20mm Standard @Anycubic 4MaxPro2",
|
|
"nozzle_diameter": [
|
|
"0.4"
|
|
],
|
|
"printable_area": [
|
|
"0x0",
|
|
"270x0",
|
|
"270x210",
|
|
"0x210"
|
|
],
|
|
"printable_height": "190",
|
|
"nozzle_type": "undefine",
|
|
"auxiliary_fan": "0",
|
|
"machine_max_acceleration_extruding": [
|
|
"1250",
|
|
"1250"
|
|
],
|
|
"machine_max_acceleration_retracting": [
|
|
"1250",
|
|
"1250"
|
|
],
|
|
"machine_max_acceleration_travel": [
|
|
"1500",
|
|
"1500"
|
|
],
|
|
"machine_max_acceleration_x": [
|
|
"900",
|
|
"900"
|
|
],
|
|
"machine_max_acceleration_y": [
|
|
"900",
|
|
"900"
|
|
],
|
|
"machine_max_acceleration_z": [
|
|
"100",
|
|
"100"
|
|
],
|
|
"machine_max_speed_e": [
|
|
"120",
|
|
"120"
|
|
],
|
|
"machine_max_speed_x": [
|
|
"200",
|
|
"200"
|
|
],
|
|
"machine_max_speed_y": [
|
|
"200",
|
|
"200"
|
|
],
|
|
"machine_max_speed_z": [
|
|
"16",
|
|
"16"
|
|
],
|
|
"machine_max_jerk_e": [
|
|
"5",
|
|
"5"
|
|
],
|
|
"machine_max_jerk_x": [
|
|
"6",
|
|
"6"
|
|
],
|
|
"machine_max_jerk_y": [
|
|
"6",
|
|
"6"
|
|
],
|
|
"machine_max_jerk_z": [
|
|
"0.2",
|
|
"0.2"
|
|
],
|
|
"max_layer_height": [
|
|
"0.3"
|
|
],
|
|
"min_layer_height": [
|
|
"0.07"
|
|
],
|
|
"printer_settings_id": "Anycubic",
|
|
"retraction_minimum_travel": [
|
|
"2"
|
|
],
|
|
"retract_before_wipe": [
|
|
"0%"
|
|
],
|
|
"retraction_length": [
|
|
"2.5"
|
|
],
|
|
"retract_length_toolchange": [
|
|
"10"
|
|
],
|
|
"retraction_speed": [
|
|
"35"
|
|
],
|
|
"deretraction_speed": [
|
|
"25"
|
|
],
|
|
"single_extruder_multi_material": "1",
|
|
"change_filament_gcode": "M600",
|
|
"machine_pause_gcode": "M601",
|
|
"default_filament_profile": [
|
|
"Anycubic Generic PLA"
|
|
],
|
|
"machine_start_gcode": "G21 ; metric values\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28 X0 Y0 ; home X and Y\nG28 Z0 ; home Z\nG1 Z30 F{machine_max_speed_z[0]*60} ; move Z a bit down to not blow on the bed edge while heating\nG1 X10 F3900 ; let some space on x to prevent the filament cooling exhaust from beeing blocked by the servo motor\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp\nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM106 S80 ; turn on fan to prevent air nozzle melt while heating up\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nM107 ; start with the fan off\nG28 X0 ; goto X home again\nG92 E0 ; zero the extruded length\nG1 Z0.2 F360 ; move plattform upwards\n; extrude material next to the plattform (comment or remove following lines to disable)\nG1 F180 E20 ; extrude some material next to the plattform\nG92 E0 ; zero the extruded length\nG1 E-[retraction_length] F{retraction_speed[0]*60} ; do a filament retract\nG92 E0 ; zero the extruded length again\nG1 X5 F3900 ; move sideways to get rid of that string\nG1 E[retraction_length] F{retraction_speed[0]*60} ; do a filament deretract with retract parameters\nG92 E0 ; zero the extruded length again\n; draw intro line (comment or remove following lines to disable)\nG1 X30 E5 F700 ; draw intro line\nG92 E0 ; zero the extruded length\nG1 E-[retraction_length] F{retraction_speed[0]*60} ; do a filament retract\nG1 X40 Z2.0 ; move away from the introline\nG92 E0 ; zero the extruded length again\nG1 E[retraction_length] F{retraction_speed[0]*60} ; do a filament deretract with retract parameters\n; end of intro line code\nM117 Printing...\nG5",
|
|
"machine_end_gcode": "M104 S0 ; turn off extruder heating\nM140 S0 ; turn off bed heating\nM107 ; turn off fans\nG91 ; relative positioning\nG0 Z+0.5 ; move Z up a tiny bit\nG90 ; absolute positioning\nG0 X135 Y105 F{machine_max_speed_x[0]*60} ; move extruder to center position\nG0 Z190.5 F{machine_max_speed_z[0]*60} ; lower the plattform to Z min\nM84 ; steppers off\nG90 ; absolute positioning\n",
|
|
"scan_first_layer": "0"
|
|
}
|