mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-09-28 03:11:47 +00:00
harrierpigeon
725df64108
The belt-printer branch is failing two profile gates. Both stem from the three belt-only vendors (Custom's generic belt printer, IdeaFormer, Printcepts) not existing upstream, so upstream maintenance passed them by. Slice check: 4 of 1015 printers failed - Custom's MyBeltPrinter 0.2/0.4/ 0.6/0.8 nozzle all fell back to "Default Setting". No process profile in the Custom vendor listed any MyBeltPrinter in compatible_printers, and Custom's fdm_belt_common pointed default_print_profile at "0.20mm Standard @System", which does not exist in that vendor's index, so the generic belt printer had no usable process at all. This gap dates to when MyBeltPrinter was added (2026-04-07); it only started failing now because the slice-check job is newer than that. Adds two process profiles modelled on the sibling @MyKlipper ones: - 0.20mm Standard @MyBeltPrinter - 0.4/0.6/0.8 nozzles - 0.12mm Fine @MyBeltPrinter - 0.2/0.4 nozzles The split is forced by hardware: the 0.2 nozzle preset caps max_layer_height at 0.16, so a single 0.20mm profile cannot legally cover it. fdm_belt_common now defaults to the standard profile and the 0.2 nozzle preset overrides to the fine one. setting_id: 14 files failed the rules introduced in #14432. That migration renumbered 7425 files across 61 vendors but skipped these three, leaving BabyBelt Pro, IdeaFormer IR3 V2 and MyBeltPrinter squatting the "G*" id space reserved for Bambu (GMPC0BBP01, GMIF001, GM_BELT_00x) and four instantiated filament/process presets carrying no setting_id at all. Regenerated with scripts/assign_vendor_setting_ids.py. Also repoints the identical dangling "0.20mm Standard @System" in Printcepts' and IdeaFormer's fdm_belt_common at their own real process profiles. That is a no-op today because both concrete printers override it, but it is the same landmine that took out MyBeltPrinter. Vendor index versions bumped so check_installed_vendor_profiles() will re-install the corrected profiles over an existing install. Note: changing a shipped preset's setting_id can orphan user presets that reference it as base_id. #14432 accepted that tradeoff for 61 vendors; this keeps these three consistent with the rest. Verified: orca_extra_profile_check.py reports 0 errors across 66 vendors (was 14 files with errors), and OrcaSlicer_profile_validator -s slices all 1015 printer presets successfully (was 4 failures).
88 lines
1.5 KiB
JSON
88 lines
1.5 KiB
JSON
{
|
|
"type": "machine",
|
|
"name": "BabyBelt Pro 0.4 nozzle",
|
|
"inherits": "fdm_belt_common",
|
|
"from": "system",
|
|
"setting_id": "34OWINlJpJgA9DwQ",
|
|
"instantiation": "true",
|
|
"printer_model": "BabyBelt Pro",
|
|
"printer_variant": "0.4",
|
|
"nozzle_diameter": [
|
|
"0.4"
|
|
],
|
|
"default_filament_profile": [
|
|
"Generic PLA @BabyBelt Pro"
|
|
],
|
|
"default_print_profile": "0.20mm Standard @BabyBelt Pro",
|
|
"printable_area": [
|
|
"0x0",
|
|
"95x0",
|
|
"95x500",
|
|
"0x500"
|
|
],
|
|
"printable_height": "100",
|
|
"best_object_pos": "0.5,0.05",
|
|
"nozzle_type": [
|
|
"hardened_steel"
|
|
],
|
|
"printer_extruder_id": [
|
|
"1"
|
|
],
|
|
"printer_extruder_variant": [
|
|
"Direct Drive Standard"
|
|
],
|
|
"thumbnails": [
|
|
"48x48/PNG",
|
|
"300x300/PNG"
|
|
],
|
|
"machine_max_acceleration_e": [
|
|
"500",
|
|
"5000"
|
|
],
|
|
"machine_max_acceleration_extruding": [
|
|
"500",
|
|
"20000"
|
|
],
|
|
"machine_max_acceleration_retracting": [
|
|
"500",
|
|
"5000"
|
|
],
|
|
"machine_max_acceleration_x": [
|
|
"500",
|
|
"20000"
|
|
],
|
|
"machine_max_acceleration_y": [
|
|
"500",
|
|
"20000"
|
|
],
|
|
"machine_max_junction_deviation": [
|
|
"0.01"
|
|
],
|
|
"machine_max_speed_x": [
|
|
"50",
|
|
"200"
|
|
],
|
|
"machine_max_speed_y": [
|
|
"50",
|
|
"200"
|
|
],
|
|
"machine_max_speed_z": [
|
|
"5",
|
|
"12"
|
|
],
|
|
"retraction_length": [
|
|
"1.5"
|
|
],
|
|
"retraction_speed": [
|
|
"20"
|
|
],
|
|
"deretraction_speed": [
|
|
"25"
|
|
],
|
|
"retract_lift_enforce": [
|
|
"Top and Bottom"
|
|
],
|
|
"support_chamber_temp_control": "0",
|
|
"machine_start_gcode": ";Start GCode\nPRINT_START ANGLE=[belt_slice_rotation_angle] EXTRUDER=[nozzle_temperature_initial_layer] BED=[hot_plate_temp_initial_layer] MATERIAL=[filament_type]\n"
|
|
}
|