mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-17 10:32:20 +00:00
16727644bb
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
217 lines
6.2 KiB
JSON
217 lines
6.2 KiB
JSON
{
|
|
"type": "machine",
|
|
"name": "Flashforge Guider 3 Ultra 0.4 Nozzle",
|
|
"inherits": "fdm_guider3_common",
|
|
"from": "system",
|
|
"setting_id": "GM001",
|
|
"instantiation": "true",
|
|
"auxiliary_fan": "1",
|
|
"bed_custom_model": "",
|
|
"bed_custom_texture": "",
|
|
"bed_exclude_area": [
|
|
"0x0"
|
|
],
|
|
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0",
|
|
"best_object_pos": "0.5,0.5",
|
|
"change_extrusion_role_gcode": "",
|
|
"change_filament_gcode": "; change filament start\n{if total_toolchanges == 0 and current_extruder == 1}\nM104 S0 T0\n{elsif total_toolchanges > 0 and current_extruder == 0}\nM104 S{nozzle_temperature[0]}\n{if layer_z == initial_layer_print_height}\nT1\nM109 S{nozzle_temperature_initial_layer[1]} T1\n{else}\nT1\nM109 S{nozzle_temperature[1]} T1\n{endif}\n{elsif total_toolchanges > 0 and current_extruder == 1}\nM104 S{nozzle_temperature[1]}\n{if layer_z == initial_layer_print_height}\nT0\nM109 S{nozzle_temperature_initial_layer[0]} T0\n{else}\nT0\nM109 S{nozzle_temperature[0]} T0\n{endif}\n{endif}\n",
|
|
"cooling_tube_length": "0",
|
|
"cooling_tube_retraction": "0",
|
|
"default_filament_profile": [
|
|
"Flashforge Generic PLA @G3U"
|
|
],
|
|
"default_print_profile": "0.20mm Standard @Flashforge G3U 0.4 Nozzle",
|
|
"deretraction_speed": [
|
|
"35"
|
|
],
|
|
"enable_filament_ramming": "0",
|
|
"extra_loading_move": "0",
|
|
"extruder_clearance_height_to_lid": "150",
|
|
"extruder_clearance_height_to_rod": "50",
|
|
"extruder_clearance_radius": "57",
|
|
"extruder_colour": [
|
|
"#FCE94F"
|
|
],
|
|
"extruder_offset": [
|
|
"0x0"
|
|
],
|
|
"fan_kickstart": "0",
|
|
"fan_speedup_overhangs": "1",
|
|
"fan_speedup_time": "0",
|
|
"gcode_flavor": "klipper",
|
|
"high_current_on_filament_swap": "0",
|
|
"host_type": "octoprint",
|
|
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
|
"machine_end_gcode": "G1 E-3 F3600\nG0 X50 Y50 F30000\nM104 S0 T0\nM104 S0 T1",
|
|
"machine_load_filament_time": "0",
|
|
"machine_max_acceleration_e": [
|
|
"5000",
|
|
"5000"
|
|
],
|
|
"machine_max_acceleration_extruding": [
|
|
"20000",
|
|
"20000"
|
|
],
|
|
"machine_max_acceleration_retracting": [
|
|
"5000",
|
|
"5000"
|
|
],
|
|
"machine_max_acceleration_travel": [
|
|
"20000",
|
|
"20000"
|
|
],
|
|
"machine_max_acceleration_x": [
|
|
"20000",
|
|
"20000"
|
|
],
|
|
"machine_max_acceleration_y": [
|
|
"20000",
|
|
"20000"
|
|
],
|
|
"machine_max_acceleration_z": [
|
|
"500",
|
|
"500"
|
|
],
|
|
"machine_max_jerk_e": [
|
|
"2.5",
|
|
"2.5"
|
|
],
|
|
"machine_max_jerk_x": [
|
|
"9",
|
|
"9"
|
|
],
|
|
"machine_max_jerk_y": [
|
|
"9",
|
|
"9"
|
|
],
|
|
"machine_max_jerk_z": [
|
|
"3",
|
|
"3"
|
|
],
|
|
"machine_max_speed_e": [
|
|
"30",
|
|
"30"
|
|
],
|
|
"machine_max_speed_x": [
|
|
"600",
|
|
"600"
|
|
],
|
|
"machine_max_speed_y": [
|
|
"600",
|
|
"600"
|
|
],
|
|
"machine_max_speed_z": [
|
|
"20",
|
|
"20"
|
|
],
|
|
"machine_min_extruding_rate": [
|
|
"0",
|
|
"0"
|
|
],
|
|
"machine_min_travel_rate": [
|
|
"0",
|
|
"0"
|
|
],
|
|
"machine_pause_gcode": "M25",
|
|
"machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\n{if total_toolchanges < 1}\nM109 S[nozzle_temperature_initial_layer] T[initial_extruder]\nT[initial_extruder]\nG21\nG90\nM83\nG1 Z0.3 F400\nG1 X-145 Y{random(-160,-152)} F4800\nG1 X-95 Y{random(-160,-152)} E30 F400\nG92 E0\nG1 Z10 F2000 ; move up from purge line\nG1 X-80 F4800 ; move away from purge line\n{else}\nM109 S{nozzle_temperature_initial_layer[0] - 30} T0\nM109 S{nozzle_temperature_initial_layer[1] - 30} T1\n{if initial_extruder==0}\nM109 S{nozzle_temperature_initial_layer[1]} T1\nT1\nG21\nG90\nM83\nG1 Z0.3 F400\nG1 X-145 Y{random(-160,-152)} F4800\nG1 X-95 Y{random(-160,-152)} E30 F400\nG1 E-15 F1800\nG92 E0\nG1 Z10 F2000 ; move up from purge line\nG1 X-80 F4800 ; move away from purge line\nM104 S{nozzle_temperature_initial_layer[1]-30} T1\nM109 S{nozzle_temperature_initial_layer[0]} T0\nT0\nG1 Z0.3 F400\nG1 X145 Y{random(-160,-152)} F4800\nG1 X95 Y{random(-160,-152)} E30 F400\nG1 E-0.8 F1800\nG92 E0\nG1 Z10 F2000 ; move up from purge line\nG1 X80 F4800 ; move away from purge line\nG92 E0\n{elsif current_extruder == 1}\nM109 S{nozzle_temperature_initial_layer[0]} T0\nT0\nG21\nG90\nM83\nG1 Z0.3 F400\nG1 X-145 Y{random(-160,-152)} F4800\nG1 X-95 Y{random(-160,-152)} E30 F400\nG1 E-15 F1800\nG92 E0\nG1 Z10 F2000 ; move up from purge line\nG1 X-80 F4800 ; move away from purge line\nM104 S{nozzle_temperature_initial_layer[0]-30} T0\nM109 S{nozzle_temperature_initial_layer[1]} T1\nT1\nG1 Z0.3 F400\nG1 X145 Y{random(-160,-152)} F4800\nG1 X95 Y{random(-160,-152)} E30 F400\nG1 E-0.8 F1800\nG92 E0\nG1 Z10 F2000 ; move up from purge line\nG1 X80 F4800 ; move away from purge line\nG92 E0\n{endif}\n{endif}\n\n",
|
|
"machine_unload_filament_time": "0",
|
|
"manual_filament_change": "0",
|
|
"max_layer_height": [
|
|
"0.28"
|
|
],
|
|
"min_layer_height": [
|
|
"0.08"
|
|
],
|
|
"nozzle_diameter": [
|
|
"0.4"
|
|
],
|
|
"nozzle_hrc": "0",
|
|
"nozzle_type": "stainless_steel",
|
|
"nozzle_volume": "0",
|
|
"parking_pos_retraction": "0",
|
|
"print_host": "",
|
|
"print_host_webui": "",
|
|
"printable_area": [
|
|
"-150x-165",
|
|
"150x-165",
|
|
"150x165",
|
|
"-150x165"
|
|
],
|
|
"printable_height": "600",
|
|
"printer_model": "Flashforge Guider 3 Ultra",
|
|
"printer_notes": "",
|
|
"printer_settings_id": "Flashforge",
|
|
"printer_structure": "undefine",
|
|
"printer_technology": "FFF",
|
|
"printer_variant": "0.4",
|
|
"printhost_apikey": "",
|
|
"printhost_authorization_type": "key",
|
|
"printhost_cafile": "",
|
|
"printhost_password": "",
|
|
"printhost_port": "",
|
|
"printhost_ssl_ignore_revoke": "0",
|
|
"printhost_user": "",
|
|
"purge_in_prime_tower": "0",
|
|
"retract_before_wipe": [
|
|
"100%"
|
|
],
|
|
"retract_length_toolchange": [
|
|
"15"
|
|
],
|
|
"retract_lift_above": [
|
|
"0"
|
|
],
|
|
"retract_lift_below": [
|
|
"0"
|
|
],
|
|
"retract_lift_enforce": [
|
|
"All Surfaces"
|
|
],
|
|
"retract_restart_extra": [
|
|
"0"
|
|
],
|
|
"retract_restart_extra_toolchange": [
|
|
"-0.8"
|
|
],
|
|
"retract_when_changing_layer": [
|
|
"1"
|
|
],
|
|
"retraction_length": [
|
|
"0.8"
|
|
],
|
|
"retraction_minimum_travel": [
|
|
"1"
|
|
],
|
|
"retraction_speed": [
|
|
"35"
|
|
],
|
|
"scan_first_layer": "0",
|
|
"silent_mode": "0",
|
|
"single_extruder_multi_material": "1",
|
|
"support_air_filtration": "1",
|
|
"support_chamber_temp_control": "1",
|
|
"template_custom_gcode": "",
|
|
"thumbnails": [
|
|
"140x110"
|
|
],
|
|
"thumbnails_format": "PNG",
|
|
"time_cost": "0",
|
|
"time_lapse_gcode": "",
|
|
"upward_compatible_machine": [],
|
|
"use_firmware_retraction": "0",
|
|
"use_relative_e_distances": "1",
|
|
"wipe": [
|
|
"1"
|
|
],
|
|
"wipe_distance": [
|
|
"2"
|
|
],
|
|
"z_hop": [
|
|
"0.4"
|
|
],
|
|
"z_hop_types": [
|
|
"Normal Lift"
|
|
],
|
|
"z_offset": "0"
|
|
}
|