{
  "type": "machine",
  "name": "fdm_machine_common",
  "from": "system",
  "instantiation": "false",
  "printer_technology": "FFF",
  "deretraction_speed": [
    "40"
  ],
  "extruder_colour": [
    "#FCE94F"
  ],
  "extruder_offset": [
    "0x0"
  ],
  "gcode_flavor": "marlin",
  "auxiliary_fan": "0",
  "machine_max_acceleration_travel": [
    "3000",
    "3000"
  ],
  "machine_max_junction_deviation": [
    "0.013",
    "0"
  ],
  "machine_max_acceleration_e": [
    "5000"
  ],
  "machine_max_acceleration_extruding": [
    "1500",
    "1500"
  ],
  "machine_max_acceleration_retracting": [
    "1500",
    "1500"
  ],
  "machine_max_acceleration_x": [
    "3000",
    "3000"
  ],
  "machine_max_acceleration_y": [
    "3000",
    "3000"
  ],
  "machine_max_acceleration_z": [
    "500",
    "500"
  ],
  "machine_max_speed_e": [
    "100",
    "100"
  ],
  "machine_max_speed_x": [
    "300",
    "300"
  ],
  "machine_max_speed_y": [
    "300",
    "300"
  ],
  "machine_max_speed_z": [
    "40",
    "40"
  ],
  "machine_max_jerk_e": [
    "2.5",
    "2.5"
  ],
  "machine_max_jerk_x": [
    "20",
    "20"
  ],
  "machine_max_jerk_y": [
    "20",
    "20"
  ],
  "machine_max_jerk_z": [
    "0.4",
    "0.4"
  ],
  "machine_min_extruding_rate": [
    "0"
  ],
  "machine_min_travel_rate": [
    "0"
  ],
  "max_layer_height": [
    "0.3"
  ],
  "min_layer_height": [
    "0.08"
  ],
  "printer_settings_id": "",
  "printer_variant": "0.4",
  "retraction_minimum_travel": [
    "2"
  ],
  "retract_before_wipe": [
    "0%"
  ],
  "retract_when_changing_layer": [
    "1"
  ],
  "retraction_length": [
    "6"
  ],
  "retract_length_toolchange": [
    "25"
  ],
  "z_hop": [
    "0"
  ],
  "retract_restart_extra": [
    "0"
  ],
  "retract_restart_extra_toolchange": [
    "0"
  ],
  "retraction_speed": [
    "50"
  ],
  "single_extruder_multi_material": "1",
  "change_filament_gcode": "",
  "wipe": [
    "1"
  ],
  "wipe_distance": [
    "0.2"
  ],
  "machine_pause_gcode": "M0",
  "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
  "machine_start_gcode": "; # # # # # # START Header\nG21; metric values\nG90; absolute positioning\nM82 ; set extruder to absolute mode\nM107; start with the fan off\n\nM140 S[bed_temperature_initial_layer_single]; start bed heating\n\nG28 X0 Y0 Z0; move X/Y/Z to endstops\nG1 X1 Y6 F15000; move X/Y to start position\nG1 Z35 F9000; move Z to start position\n\n; Wait for bed and nozzle temperatures\nM190 S{hot_plate_temp_initial_layer[0] - 5}; wait for bed temperature - 5\nM140 S[bed_temperature_initial_layer_single]; continue bed heating\nM109 S[nozzle_temperature_initial_layer]; wait for nozzle temperature\n\n; Purge and prime\nM83; set extruder to relative mode\nG92 E0; reset extrusion distance\nG0 X0 Y1 F10000\nG1 F150 E20 ; compress the bowden tube\nG1 E-8 F1200\nG0 X30 Y1 F5000\nG0 F1200 Z{initial_layer_print_height/2}; Cut the connection to priming blob\nG0 X100 F10000; disconnect with the prime blob\nG0 X50; Avoid the metal clip holding the Ultimaker glass plate\nG0 Z0.2 F720\nG1 E8 F1200\nG1 X80 E3 F1000; intro line 1\nG1 X110 E4 F1000 ; intro line 2\nG1 X140 F600; drag filament to decompress bowden tube\nG1 X100 F3200; wipe backwards a bit\nG1 X150 F3200; back to where there is no plastic: avoid dragging\nG92 E0; reset extruder reference\nM82; set extruder to absolute mode\n\n; # # # # # # END Header",
  "machine_end_gcode": "; # # # # # # START Footer\nG91; relative coordinates\n;G1 E-1 F1200; retract the filament\nG1 Z+15  X-10 Y-10 E-7  F6000; move Z a bit\n; G1 X-10 Y-10 F6000; move XY a bit\nG1 E-5.5 F300; retract the filament\nG28 X0 Y0; move X/Y to min endstops, so the head is out of the way\nM104 S0; extruder heater off\nM140 S0; heated bed heater off (if you have it)\nM84; disable motors\n; # # # # # # END Footer\n",
  "thumbnails": ""
}