{
	"type": "filament",
	"name": "BETA ABS @base",
	"inherits": "fdm_filament_abs",
	"from": "system",
	"filament_id": "OFjUXn67",
	"instantiation": "false",
	"description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
	"filament_cost": [
		"24.99"
	],
	"filament_flow_ratio": [
		"0.95"
	],
	"filament_vendor": [
		"BETA"
	],
	"impact_strength_z": [
		"7.4"
	],
	"activate_air_filtration": [
		"1"
	],
	"close_additional_fan_first_x_layers": [
		"3"
	],
	"eng_plate_temp": [
		"90"
	],
	"eng_plate_temp_initial_layer": [
		"90"
	],
	"filament_max_volumetric_speed": [
		"28.6"
	],
	"hot_plate_temp": [
		"90"
	],
	"hot_plate_temp_initial_layer": [
		"90"
	],
	"nozzle_temperature": [
		"270"
	],
	"retraction_distances_when_ec": [
		"0"
	],
	"slow_down_min_speed": [
		"20"
	],
	"temperature_vitrification": [
		"100"
	],
	"textured_plate_temp": [
		"90"
	],
	"textured_plate_temp_initial_layer": [
		"90"
	],
	"filament_start_gcode": [
		"; Filament gcode\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
	],
	"filament_end_gcode": [
		"; filament end gcode \n\n"
	],
	"volumetric_speed_coefficients": [
		"0 0 0 0 0 0"
	],
	"filament_adhesiveness_category": [
		"200"
	],
	"filament_dev_ams_drying_time": [
		"12",
		"8.0",
		"12",
		"8.0"
	],
	"filament_dev_ams_drying_heat_distortion_temperature": [
		"90"
	],
	"filament_dev_drying_cooling_temperature": [
		"75"
	],
	"filament_dev_ams_drying_temperature": [
		"65",
		"80",
		"65",
		"75"
	],
	"filament_dev_drying_softening_temperature": [
		"80"
	]
}