{
    "type": "process",
    "name": "0.08 Extra Fine @Snapmaker U1 (0.4 nozzle)",
    "inherits": "fdm_process_U1_0.08",
    "from": "system",
    "setting_id": "GP001",
    "instantiation": "true",
    "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time.",
    "smooth_coefficient": "150",
    "overhang_totally_speed": "50",
    "compatible_printers": [
        "Snapmaker U1 (0.4 nozzle)"
    ],
    "ooze_prevention": "1",
    "prime_tower_width": "30",
    "prime_volume": "18",
    "slowdown_for_curled_perimeters": "0",
    "standby_temperature_delta": "-150",
    "wipe_tower_filament": "0",
    "prime_tower_brim_width": "5",
    "wipe_tower_cone_angle": "15",
    "wipe_tower_extra_spacing": "120%",
    "enable_arc_fitting": "0",
    "outer_wall_speed": "100",
    "precise_outer_wall": "0",
    "support_type": "tree(auto)",
    "wipe_tower_extra_rib_length": "8",
    "wipe_tower_wall_type": "rib"
}