{
	"type": "filament",
	"setting_id": "GFSG99",
	"name": "Generic PETG @Elegoo",
	"from": "system",
	"instantiation": "true",
	"inherits": "Generic PETG @base",
	"cool_plate_temp": [
		"60"
	],
	"eng_plate_temp": [
		"0"
	],
	"hot_plate_temp": [
		"80"
	],
	"textured_plate_temp": [
		"80"
	],
	"cool_plate_temp_initial_layer": [
		"60"
	],
	"eng_plate_temp_initial_layer": [
		"0"
	],
	"hot_plate_temp_initial_layer": [
		"80"
	],
	"textured_plate_temp_initial_layer": [
		"80"
	],
	"overhang_fan_threshold": [
		"25%"
	],
	"overhang_fan_speed": [
		"90"
	],
	"slow_down_for_layer_cooling": [
		"1"
	],
	"close_fan_the_first_x_layers": [
		"3"
	],
	"filament_end_gcode": [
		"; filament end gcode \n"
	],
	"filament_flow_ratio": [
		"0.95"
	],
	"reduce_fan_stop_start_freq": [
		"1"
	],
	"fan_cooling_layer_time": [
		"30"
	],
	"filament_density": [
		"1.27"
	],
	"filament_deretraction_speed": [
		"nil"
	],
	"filament_diameter": [
		"1.75"
	],
	"filament_max_volumetric_speed": [
		"10"
	],
	"filament_minimal_purge_on_wipe_tower": [
		"15"
	],
	"filament_retraction_minimum_travel": [
		"nil"
	],
	"filament_retract_before_wipe": [
		"nil"
	],
	"filament_retract_when_changing_layer": [
		"nil"
	],
	"filament_retraction_length": [
		"nil"
	],
	"filament_z_hop": [
		"nil"
	],
	"filament_z_hop_types": [
		"nil"
	],
	"filament_retract_restart_extra": [
		"nil"
	],
	"filament_retraction_speed": [
		"nil"
	],
	"filament_settings_id": [
		""
	],
	"filament_soluble": [
		"0"
	],
	"filament_type": [
		"PETG"
	],
	"filament_vendor": [
		"Generic"
	],
	"filament_wipe": [
		"nil"
	],
	"filament_wipe_distance": [
		"nil"
	],
	"bed_type": [
		"Cool Plate"
	],
	"nozzle_temperature_initial_layer": [
		"240"
	],
	"full_fan_speed_layer": [
		"0"
	],
	"fan_max_speed": [
		"50"
	],
	"fan_min_speed": [
		"20"
	],
	"slow_down_min_speed": [
		"10"
	],
	"slow_down_layer_time": [
		"8"
	],
	"filament_start_gcode": [
		"; filament start gcode\n"
	],
	"nozzle_temperature": [
		"240"
	],
	"temperature_vitrification": [
		"70"
	],
	"nozzle_temperature_range_high": [
		"260"
	],
	"nozzle_temperature_range_low": [
		"220"
	],
	"compatible_printers": [
		"Elegoo Neptune 0.4 nozzle",
		"Elegoo Neptune 0.6 nozzle",
		"Elegoo Neptune 0.8 nozzle",
		"Elegoo Neptune 2 0.4 nozzle",
		"Elegoo Neptune 2 0.6 nozzle",
		"Elegoo Neptune 2 0.8 nozzle",
		"Elegoo Neptune 2S 0.4 nozzle",
		"Elegoo Neptune 2S 0.6 nozzle",
		"Elegoo Neptune 2S 0.8 nozzle",
		"Elegoo Neptune 2D 0.4 nozzle",
		"Elegoo Neptune 2D 0.6 nozzle",
		"Elegoo Neptune 2D 0.8 nozzle",
		"Elegoo Neptune X 0.4 nozzle",
		"Elegoo Neptune X 0.6 nozzle",
		"Elegoo Neptune X 0.8 nozzle",
		"Elegoo Neptune 3 0.4 nozzle",
		"Elegoo Neptune 3 0.6 nozzle",
		"Elegoo Neptune 3 0.8 nozzle",
		"Elegoo Neptune 3 Pro 0.4 nozzle",
		"Elegoo Neptune 3 Pro 0.6 nozzle",
		"Elegoo Neptune 3 Pro 0.8 nozzle",
		"Elegoo Neptune 3 Pro 1.0 nozzle",
		"Elegoo Neptune 3 Plus 0.4 nozzle",
		"Elegoo Neptune 3 Plus 0.6 nozzle",
		"Elegoo Neptune 3 Plus 0.8 nozzle",
		"Elegoo Neptune 3 Plus 1.0 nozzle",
		"Elegoo Neptune 3 Max 0.4 nozzle",
		"Elegoo Neptune 3 Max 0.6 nozzle",
		"Elegoo Neptune 3 Max 0.8 nozzle",
		"Elegoo Neptune 3 Max 1.0 nozzle",
		"Elegoo Neptune 4 0.2 nozzle",
		"Elegoo Neptune 4 0.4 nozzle",
		"Elegoo Neptune 4 0.6 nozzle",
		"Elegoo Neptune 4 0.8 nozzle",
		"Elegoo Neptune 4 1.0 nozzle",
		"Elegoo Neptune 4 Max 0.2 nozzle",
		"Elegoo Neptune 4 Pro 0.4 nozzle",
		"Elegoo Neptune 4 Pro 0.6 nozzle",
		"Elegoo Neptune 4 Pro 0.8 nozzle",
		"Elegoo Neptune 4 Pro 1.0 nozzle",
		"Elegoo Neptune 4 Plus 0.2 nozzle",
		"Elegoo Neptune 4 Plus 0.4 nozzle",
		"Elegoo Neptune 4 Plus 0.6 nozzle",
		"Elegoo Neptune 4 Plus 0.8 nozzle",
		"Elegoo Neptune 4 Plus 1.0 nozzle",
		"Elegoo Neptune 4 Pro 0.2 nozzle",
		"Elegoo Neptune 4 Max 0.4 nozzle",
		"Elegoo Neptune 4 Max 0.6 nozzle",
		"Elegoo Neptune 4 Max 0.8 nozzle",
		"Elegoo Neptune 4 Max 1.0 nozzle"
	]
}