{
	"type": "machine",
	"name": "Creality K2 Pro 0.8 nozzle",
	"inherits": "fdm_creality_common",
	"from": "system",
	"setting_id": "Dp40KfzTlDSNWQOE",
	"instantiation": "true",
	"printer_model": "Creality K2 Pro",
	"gcode_flavor": "klipper",
	"default_print_profile": "0.40mm Standard @Creality K2 Pro 0.8 nozzle",
	"nozzle_diameter": [
		"0.8"
	],
	"printer_variant": "0.8",
	"printable_area": [
		"0x0",
		"300x0",
		"300x300",
		"0x300"
	],
	"printable_height": "300",
	"nozzle_type": "hardened_steel",
	"nozzle_volume": "183",
	"auxiliary_fan": "1",
	"support_air_filtration": "1",
	"support_chamber_temp_control": "0",
	"support_multi_bed_types": "1",
	"machine_max_acceleration_e": [
		"5000",
		"5000"
	],
	"machine_max_acceleration_extruding": [
		"20000",
		"20000"
	],
	"machine_max_acceleration_retracting": [
		"5000",
		"5000"
	],
	"machine_max_acceleration_travel": [
		"20000",
		"20000"
	],
	"machine_max_acceleration_x": [
		"20000",
		"20000"
	],
	"machine_max_acceleration_y": [
		"20000",
		"20000"
	],
	"machine_max_acceleration_z": [
		"300",
		"300"
	],
	"machine_max_speed_e": [
		"50",
		"50"
	],
	"machine_max_speed_x": [
		"800",
		"800"
	],
	"machine_max_speed_y": [
		"800",
		"800"
	],
	"machine_max_speed_z": [
		"10",
		"10"
	],
	"machine_max_jerk_e": [
		"10",
		"10"
	],
	"machine_max_jerk_x": [
		"100",
		"100"
	],
	"machine_max_jerk_y": [
		"100",
		"100"
	],
	"machine_max_jerk_z": [
		"5",
		"5"
	],
	"max_layer_height": [
		"0.56"
	],
	"min_layer_height": [
		"0.16"
	],
	"printer_settings_id": "Creality",
	"retraction_minimum_travel": [
		"2"
	],
	"retract_before_wipe": [
		"90%"
	],
	"retraction_length": [
		"2"
	],
	"retract_length_toolchange": [
		"0"
	],
	"retraction_speed": [
		"30"
	],
	"deretraction_speed": [
		"30"
	],
	"retract_lift_above": [
		"0"
	],
	"retract_lift_below": [
		"299"
	],
	"enable_filament_ramming": "0",
	"purge_in_prime_tower": "1",
	"cooling_tube_length": "0",
	"cooling_tube_retraction": "0",
	"parking_pos_retraction": "0",
	"extra_loading_move": "0",
	"extruder_clearance_height_to_lid": "118",
	"extruder_clearance_height_to_rod": "24",
	"extruder_clearance_radius": "64",
	"z_hop": [
		"0.4"
	],
	"wipe_distance": [
		"2"
	],
	"single_extruder_multi_material": "1",
	"manual_filament_change": "0",
	"default_filament_profile": [
		"Creality Generic PLA @K2-all"
	],
	"_comment": "the generated by Creality_Print start gcode removes a warning/error message when printing with Orca because it thinks its sliced with CrealityPrint ",
	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
	"machine_end_gcode": "{if print_sequence == \"by object\"}\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{max_layer_z+2} F600\n{endif}\nEND_PRINT",
	"machine_pause_gcode": "PAUSE",
	"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{if print_sequence == \"by object\"}\nG0 Z{max_layer_z + 0.8} F900\n{endif}\nG1 X0 Y160 F30000\nG1 Z{z_after_toolchange} F600",
	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
	"scan_first_layer": "0",
	"thumbnails_format": "PNG",
	"thumbnails": [
		"96x96/PNG",
		"300x300/PNG"
	],
	"adaptive_bed_mesh_margin": "0",
	"bbl_use_printhost": "0",
	"bed_exclude_area": "0x0",
	"bed_mesh_max": "99999,99999",
	"bed_mesh_min": "-99999,-99999",
	"bed_mesh_probe_distance": "50,50",
	"best_object_pos": "0.5,0.5",
	"creality_flush_time": "86",
	"disable_m73": "0",
	"emit_machine_limits_to_gcode": "1",
	"enable_long_retraction_when_cut": "0",
	"fan_kickstart": "0",
	"fan_speedup_overhangs": "1",
	"fan_speedup_time": "0",
	"high_current_on_filament_swap": "0",
	"host_type": "crealityprint",
	"printer_agent": "crealityprint",
	"machine_LED_light_exist": "1",
	"machine_load_filament_time": "86",
	"machine_min_extruding_rate": "0,0",
	"machine_min_travel_rate": "0,0",
	"machine_platform_motion_enable": "1",
	"machine_ptc_exist": "1",
	"machine_tool_change_time": "0",
	"machine_unload_filament_time": "0",
	"nozzle_height": "4",
	"nozzle_hrc": "0",
	"pellet_modded_printer": "0",
	"preferred_orientation": "0",
	"prime_tower_position_type": "Middle Upper",
	"printer_technology": "FFF",
	"printhost_authorization_type": "key",
	"printhost_ssl_ignore_revoke": "0",
	"silent_mode": "0",
	"time_cost": "0",
	"use_firmware_retraction": "0",
	"use_relative_e_distances": "1",
	"z_offset": "0",
	"extruder_colour": "#FCE94F",
	"extruder_offset": "0x0",
	"long_retractions_when_cut": "0",
	"retract_lift_enforce": "All Surfaces",
	"retract_restart_extra": "0",
	"retract_restart_extra_toolchange": "0",
	"retract_when_changing_layer": "1",
	"retraction_distances_when_cut": "18",
	"travel_slope": "3",
	"wipe": "1",
	"z_hop_types": "Slope Lift"
}