{
	"type": "process",
	"name": "0.16 Optimal @Snapmaker U1 (0.4 nozzle)",
	"inherits": "fdm_process_U1_0.16",
	"from": "system",
	"setting_id": "ERcgRLp5bQo1hgz8",
	"instantiation": "true",
	"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
	"smooth_coefficient": "150",
	"overhang_totally_speed": "50",
	"compatible_printers": [
		"Snapmaker U1 (0.4 nozzle)"
	],
	"ooze_prevention": "1",
	"prime_tower_width": "30",
	"prime_volume": "36",
	"slowdown_for_curled_perimeters": "0",
	"standby_temperature_delta": "-150",
	"wipe_tower_filament": "0",
	"prime_tower_brim_width": "5",
	"wipe_tower_cone_angle": "15",
	"wipe_tower_extra_spacing": "120%",
	"enable_arc_fitting": "0",
	"precise_outer_wall": "1",
	"support_type": "tree(auto)",
	"wipe_tower_extra_rib_length": "8",
	"wipe_tower_wall_type": "rib",
	"gap_fill_target": "topbottom"
}