# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2026-07-29 17:40-0300\n" "PO-Revision-Date: 2026-07-20 13:33+0200\n" "Last-Translator: Manu Goiogana \n" "Language-Team: \n" "Language: eu\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" "X-Generator: Poedit 3.9\n" # AI Translated msgid "Main Extruder" msgstr "Estrusore nagusia" # AI Translated msgid "Main extruder" msgstr "Estrusore nagusia" # AI Translated msgid "main extruder" msgstr "estrusore nagusia" # AI Translated msgid "Auxiliary Extruder" msgstr "Estrusore lagungarria" # AI Translated msgid "Auxiliary extruder" msgstr "Estrusore lagungarria" # AI Translated msgid "auxiliary extruder" msgstr "estrusore lagungarria" msgid "Left Extruder" msgstr "Ezkerreko estrusorea" msgid "Left extruder" msgstr "Ezkerreko estrusorea" msgid "left extruder" msgstr "ezkerreko estrusorea" msgid "Right Extruder" msgstr "Eskuineko estrusorea" msgid "Right extruder" msgstr "Eskuineko estrusorea" msgid "right extruder" msgstr "eskuineko estrusorea" # AI Translated msgid "Main Nozzle" msgstr "Pita nagusia" # AI Translated msgid "Main nozzle" msgstr "Pita nagusia" # AI Translated msgid "main nozzle" msgstr "pita nagusia" # AI Translated msgid "Auxiliary Nozzle" msgstr "Pita lagungarria" # AI Translated msgid "Auxiliary nozzle" msgstr "Pita lagungarria" # AI Translated msgid "auxiliary nozzle" msgstr "pita lagungarria" msgid "Left Nozzle" msgstr "Ezkerreko pita" msgid "Left nozzle" msgstr "Ezkerreko pita" msgid "left nozzle" msgstr "ezkerreko pita" msgid "Right Nozzle" msgstr "Eskuineko pita" msgid "Right nozzle" msgstr "Eskuineko pita" msgid "right nozzle" msgstr "eskuineko pita" # AI Translated msgid "Main Hotend" msgstr "Hotend nagusia" # AI Translated msgid "Main hotend" msgstr "Hotend nagusia" # AI Translated msgid "main hotend" msgstr "hotend nagusia" # AI Translated msgid "Auxiliary Hotend" msgstr "Hotend lagungarria" # AI Translated msgid "Auxiliary hotend" msgstr "Hotend lagungarria" # AI Translated msgid "auxiliary hotend" msgstr "hotend lagungarria" # AI Translated msgid "Left Hotend" msgstr "Ezkerreko hotenda" # AI Translated msgid "Left hotend" msgstr "Ezkerreko hotenda" # AI Translated msgid "left hotend" msgstr "ezkerreko hotenda" # AI Translated msgid "Right Hotend" msgstr "Eskuineko hotenda" # AI Translated msgid "Right hotend" msgstr "Eskuineko hotenda" # AI Translated msgid "right hotend" msgstr "eskuineko hotenda" # AI Translated msgid "main" msgstr "nagusia" # AI Translated msgid "auxiliary" msgstr "lagungarria" # AI Translated msgid "Main" msgstr "Nagusia" # AI Translated msgid "Auxiliary" msgstr "Lagungarria" msgid "left" msgstr "ezkerra" msgid "right" msgstr "eskuina" msgid "Left" msgstr "Ezkerrekoa" msgid "Right" msgstr "Eskuinekoa" msgid "extruder" msgstr "estrusorea" msgid "TPU is not supported by AMS." msgstr "AMSak ez du TPUa onartzen." msgid "AMS does not support 'Bambu Lab PET-CF'." msgstr "AMSak ez du 'Bambu Lab PET-CF' onartzen." msgid "The current filament doesn't support the E3D high-flow nozzle and can't be used." msgstr "Uneko filamentuak ez du E3D fluxu handiko pita onartzen eta ezin da erabili." msgid "The current filament doesn't support the TPU high-flow nozzle and can't be used." msgstr "Uneko filamentuak ez du TPU fluxu handiko pita onartzen eta ezin da erabili." msgid "Auto dynamic flow calibration is not supported for TPU filament." msgstr "Fluxu dinamikoaren kalibrazio automatikoa ez da onartzen TPU filamenturako." msgid "Bambu TPU 85A is not supported for printing with 0.4 mm Standard or High Flow nozzles." msgstr "Bambu TPU 85A ez da onartzen 0,4 mm-ko pita estandarrekin edo fluxu handikoekin inprimatzeko." msgid "How to feed TPU filament." msgstr "Nola kargatu TPU filamentua." msgid "How to feed TPU filament on X2D." msgstr "Nola kargatu TPU filakentua X2Dn." msgid "Please cold pull before printing TPU to avoid clogging. You may use cold pull maintenance on the printer." msgstr "Egin hotzeko tiraketa TPUarekin inprimatu aurretik, buxadurak saihesteko. Inprimagailuko hotzeko tiraketaren mantentze-funtzioa erabil dezakezu." msgid "Damp PVA will become flexible and get stuck inside AMS, please take care to dry it before use." msgstr "PVA hezea malgu bihurtzen da eta AMS barruan trabatu egiten da; mesedez, erabili aurretik lehortu." msgid "Damp PVA is flexible and may get stuck in extruder. Dry it before use." msgstr "PVA malgua da eta estrusorea buxa dezake. Lehortu erabili aurretik." msgid "The rough surface of PLA Glow can accelerate wear on the AMS system, particularly on the internal components of the AMS Lite." msgstr "PLA Glow-ren gainazal latzak AMS sistemaren higadura azkartu dezake, bereziki AMS Lite-ren barneko osagaiena." msgid "PLA Glow may wear the AMS first stage feeder. Use an external spool instead." msgstr "PLA Glow-k AMSaren lehen etapako elikagailua higa dezake. Erabili kanpoko haril bat." msgid "CF/GF filaments are hard and brittle, it's easy to break or get stuck in AMS, please use with caution." msgstr "CF/GF filamentuak gogorrak eta hauskorrak dira, erraza da apurtzea edo AMS-an trabatzea, mesedez kontuz erabili." msgid "PPS-CF is brittle and could break in bended PTFE tube above Toolhead." msgstr "PPS-CF hauskorra da eta inprimatze-buruaren gaineko PTFE hodi tolestuan hautsi daiteke." msgid "PPA-CF is brittle and could break in bended PTFE tube above Toolhead." msgstr "PPA-CF hauskorra da eta inprimatze-buruaren gaineko PTFE hodi tolestuan hautsi daiteke." msgid "Default settings may affect print quality. Adjust as needed for best results." msgstr "Ezarpen lehenetsiek inprimatze-kalitateari eragin diezaiokete. Doitu behar den moduan emaitzarik onenak lortzeko." #, c-format, boost-format msgid "%s has a risk of nozzle clogging when using 0.4mm high-flow nozzles. Use with caution." msgstr "%s erabiltzean pita buxatzeko arriskua dago 0,4 mm-ko fluxu handiko pitarekin. Erabili kontuz." #, c-format, boost-format msgid "%s filaments are hard and brittle and could break in AMS, and there is also a risk of nozzle clogging when using 0.4mm high-flow nozzles. Use with caution." msgstr "%s filamentuak gogorrak eta hauskorrak dira, eta AMSan hautsi daitezke; gainera, pita buxatzeko arriskua dago 0,4 mm-ko fluxu handiko pitarekin. Erabili kontuz." #, c-format, boost-format msgid "%s has a risk of nozzle clogging when using 0.4, 0.6, 0.8mm high-flow nozzles. Use with caution." msgstr "%s erabiltzean pita buxatzeko arriskua dago 0,4, 0,6 eta 0,8 mm-ko fluxu handiko pitekin. Erabili kontuz." #, c-format, boost-format msgid "%s may fail to load or unload due to the Filament Track Switch. If you wish to continue." msgstr "Baliteke %s ezin kargatu edo deskargatu izatea Filament Track Switch-agatik. Jarraitu nahi baduzu." #, c-format, boost-format msgid "%s is not supported by %s extruder." msgstr "%s ez du onartzen %s estrusoreak." #, c-format, boost-format msgid "There may be critical print quality issues when printing '%s' with %s Bowden extruder. Use with caution!" msgstr "Inprimatze-kalitateko arazo larriak egon daitezke '%s' %s Bowden estrusorearekin inprimatzean. Erabili kontuz!" #, c-format, boost-format msgid "There may be critical print quality issues when printing '%s' with %s extruder. Use with caution!" msgstr "Inprimatze-kalitateko arazo larriak egon daitezke '%s' %s estrusorearekin inprimatzean. Erabili kontuz!" #, c-format, boost-format msgid "There may be print quality issues when printing '%s' with %s Bowden extruder. Use with caution." msgstr "Inprimatze-kalitateko arazoak egon daitezke '%s' %s Bowden estrusorearekin inprimatzean. Erabili kontuz." #, c-format, boost-format msgid "There may be print quality issues when printing '%s' with %s extruder. Use with caution." msgstr "Inprimatze-kalitateko arazoak egon daitezke '%s' %s estrusorearekin inprimatzean. Erabili kontuz." msgid "High Flow" msgstr "Fluxu handia" msgid "Standard" msgstr "Estandarra" msgid "TPU High Flow" msgstr "Fluxu handiko TPUa" msgid "Unknown" msgstr "Ezezaguna" msgid "Hardened Steel" msgstr "Altzairu gogortua" msgid "Stainless Steel" msgstr "Altzairu herdoilgaitza" msgid "Tungsten Carbide" msgstr "Tungsteno karburoa" msgid "The toolhead and hotend rack may move. Please keep your hands away from the chamber." msgstr "Inprimatze-burua eta hotend-aren euskarria mugi daitezke. Mantendu eskuak ganberatik urrun." msgid "Warning" msgstr "Abisua" msgid "Hotend information may be inaccurate. Would you like to re-read the hotend? (Hotend information may change during power-off)." msgstr "Hotend-aren informazioa zehaztugabea izan daiteke. Hotend-a berriro irakurri nahi duzu? (Hotend-aren informazioa alda daiteke itzaltzean)." msgid "I confirm all" msgstr "Guztia berresten dut" msgid "Re-read all" msgstr "Berrirakurri dena" msgid "Reading the hotends, please wait." msgstr "Hotend-ak irakurtzen. Itxaron." msgid "During the hotend upgrade, the toolhead will move. Don't reach into the chamber." msgstr "Hotend-a eguneratzean, inprimatze-burua mugitu egingo da. Ez sartu eskurik ganberan." msgid "Update" msgstr "Eguneratu" msgid "Current AMS humidity" msgstr "Uneko AMSko hezetasuna" msgid "Humidity" msgstr "Hezetasuna" msgid "Temperature" msgstr "Tenperatura" msgid "Left Time" msgstr "Geratzen den denbora" msgid "Drying" msgstr "Lehortzea" msgid "Idle" msgstr "Zereginik gabe" msgid "Model:" msgstr "Modeloa:" msgid "Serial:" msgstr "Seriea:" msgid "Version:" msgstr "Bertsioa:" msgid "Latest version" msgstr "Azken bertsioa" msgid "Row A" msgstr "A errenkada" msgid "Row B" msgstr "B errenkada" msgid "Toolhead" msgstr "Inprimatze-burua" msgid "Empty" msgstr "Hutsik" msgid "Error" msgstr "Errorea" msgid "Induction Hotend Rack" msgstr "Indukziozko hotend-en euskarria" msgid "Hotends Info" msgstr "Hotend-ei buruzko informazioa" msgid "Read All" msgstr "Irakurri guztia" msgid "Reading " msgstr "Irakurtzen " msgid "Please wait" msgstr "Itxaron, mesedez" # AI Translated msgid "Reading" msgstr "Irakurtzen" msgid "Running..." msgstr "Exekutatzen..." msgid "Raised" msgstr "Altxatuta" msgid "The hotend is in an abnormal state and currently unavailable. Please go to 'Device -> Upgrade' to upgrade firmware." msgstr "Hotend-a egoera anomaloan dago eta ez dago erabilgarri. Joan 'Gailua -> Eguneratu' atalera firmwarea eguneratzeko." msgid "Abnormal Hotend" msgstr "Hotend anormala" msgid "Cancel" msgstr "Utzi" msgid "Jump to the upgrade page" msgstr "Joan eguneratze-orrira" msgid "Refresh" msgstr "Freskatu" msgid "Refreshing" msgstr "Freskatzen" msgid "Hotend status abnormal, unavailable at present. Please upgrade the firmware and try again." msgstr "Hotendaren egoera anormala da eta ez dago erabilgarri une honetan. Eguneratu firmwarea eta saiatu berriro." msgid "SN" msgstr "SN" msgid "Version" msgstr "Bertsioa" #, c-format, boost-format msgid "Used Time: %s" msgstr "Erabilitako denbora: %s" msgid "Dynamic nozzles are allocated on the current plate. Picking hotend is not supported." msgstr "Pita dinamikoak esleituta daude uneko plakan. Ez da hotend beroa hautatzea onartzen." msgid "Hotend Rack" msgstr "Hotend-en euskarria" msgid "ToolHead" msgstr "Inprimatze-burua" msgid "Nozzle information needs to be read" msgstr "Pitaren informazioa irakurri behar da" msgid "Support Painting" msgstr "Euskarriak margotu" msgid "Apply" msgstr "Aplikatu" msgid "On highlighted overhangs only" msgstr "Nabarmendutako irtenguneetan soilik" msgid "Erase all" msgstr "Ezabatu guztia" msgid "Highlight overhangs" msgstr "Irtenguneak nabarmendu" msgid "Tool type" msgstr "Erreminta mota" msgid "Gap fill" msgstr "Hutsuneak bete" msgid "Reset direction" msgstr "Norabidea berrezarri" msgid "Section view" msgstr "Sekzioaren ikuspegia" msgid "Brush size" msgstr "Pintzelaren tamaina" msgid "Smart fill angle" msgstr "Betetze adimendunaren angelua" msgid "Gap area" msgstr "Hutsune-eremua" msgid "Left mouse button" msgstr "Saguaren ezkerreko botoia" msgid "Enforce supports" msgstr "Euskarriak behartu" msgid "Right mouse button" msgstr "Saguaren eskuineko botoia" msgid "Block supports" msgstr "Euskarriak blokeatu" msgid "Erase" msgstr "Ezabatu" msgid "Mouse wheel" msgstr "Saguaren gurpila" msgid "Auto support threshold angle: " msgstr "Euskarri automatikorako angelu-atalasea: " msgid "Circle" msgstr "Zirkulua" msgid "Sphere" msgstr "Esfera" msgid "Fill" msgstr "Bete" msgid "Gap Fill" msgstr "Hutsuneak bete" msgid "Vertical" msgstr "Bertikala" msgid "Horizontal" msgstr "Horizontala" #, boost-format msgid "Allows painting only on facets selected by: \"%1%\"" msgstr "\"%1%\" bidez aukeratutako alderdiak soilik margo daitezke" msgid "Highlight faces according to overhang angle." msgstr "Aurpegiak nabarmendu irtengunearen angeluaren arabera." msgid "No auto support" msgstr "Euskarri automatikorik ez" msgid "Done" msgstr "Eginda" msgid "Support generated" msgstr "Euskarriak sortuta" msgid "Entering Paint-on supports" msgstr "Euskarriak margotzeko moduan sartzen" msgid "Leaving Paint-on supports" msgstr "Euskarriak margotzeko modutik irteten" msgid "Paint-on supports editing" msgstr "Margotutako euskarrien edizioa" msgid "Gizmo-Place on Face" msgstr "Oinarritzat jartzeko aldea aukeratzeko tresna" msgid "Lay on Face" msgstr "Oinarritzat jartzeko aldea aukeratu" #, boost-format msgid "Filament count exceeds the maximum number that painting tool supports. Only the first %1% filaments will be available in painting tool." msgstr "Filamentuen zenbaketak pintura-tresnak onartzen duen gehienezko kopurua gainditzen du. Lehen %1% filamentuak bakarrik egongo dira eskuragarri pintura-erremintan." msgid "Color Painting" msgstr "Koloreak margotu" msgid "Brush shape" msgstr "Pintzelaren forma" msgid "Paint" msgstr "Margotu" msgid "Choose filament" msgstr "Hautatu filamentua" msgid "Edge detection" msgstr "Ertzak detektatu" msgid "Triangles" msgstr "Triangeluak" msgid "Filaments" msgstr "Filamentuak" msgid "Brush" msgstr "Pintzela" msgid "Smart fill" msgstr "Betetze adimenduna" msgid "Bucket fill" msgstr "Ontzi bidezko betetzea" msgid "Height range" msgstr "Altuera tartea" msgid "Toggle Wireframe" msgstr "Aldatu alambre-sarea" msgid "Remap filaments" msgstr "Berriro esleitu filamentuak" msgid "Remap" msgstr "Berriro esleitu" msgid "Reset" msgstr "Berrezarri" # AI Translated msgctxt "Keyboard Shortcut" msgid "Enter" msgstr "Sartu" msgid "Shortcut Key " msgstr "Lasterbideko tekla " msgid "Triangle" msgstr "Triangelua" msgid "Height Range" msgstr "Altuera tartea" msgid "Remove painted color" msgstr "Ezabatu margotutako kolorea" #, boost-format msgid "Painted using: Filament %1%" msgstr "%1% filamentuarekin margotua" msgid "To:" msgstr "Nora:" msgid "Entering color painting" msgstr "Kolorea margotzeko moduan sartzen" msgid "Leaving color painting" msgstr "Kolorea margotzeko modutik irteten" msgid "Color painting editing" msgstr "Kolore-margotzea editatzen" msgid "Paint-on fuzzy skin" msgstr "Gainazal zimurra margotu" msgid "Add fuzzy skin" msgstr "Gainazal zimurra gehitu" msgid "Remove fuzzy skin" msgstr "Gainazal zimurra ezabatu" msgid "Reset selection" msgstr "Berrezarri hautaketa" msgid "Warning: Fuzzy skin is disabled, painted fuzzy skin will not take effect!" msgstr "Abisua: gainazal zimurra desgaituta dago; margotutako gainazal zimurrak ez du eraginik izango!" msgid "Enable painted fuzzy skin for this object" msgstr "Gaitu margotutako gainazal zimurra objektu honetarako" msgid "Entering Paint-on fuzzy skin" msgstr "Gainazal zimurra margotzeko moduan sartzen" msgid "Leaving Paint-on fuzzy skin" msgstr "Gainazal zimurra margotzeko modutik irteten" msgid "Paint-on fuzzy skin editing" msgstr "Gainazal zimurraren margotzea editatzen" msgid "Move" msgstr "Mugitu" msgid "Please select at least one object." msgstr "Hautatu objektu bat gutxienez." msgid "Gizmo-Move" msgstr "Translazio tresna" msgid "Rotate" msgstr "Biratu" msgid "Gizmo-Rotate" msgstr "Biraketa tresna" msgid "Optimize orientation" msgstr "Orientazioa optimizatu" msgctxt "Verb" msgid "Scale" msgstr "Eskalatu" msgid "Gizmo-Scale" msgstr "Eskalatzeko tresna" msgid "Error: Please close all toolbar menus first" msgstr "Errorea: Mesedez, itxi lehendabizi tresna-barrako menu guztiak" msgctxt "inches" msgid "in" msgstr "hazbete" msgid "mm" msgstr "mm" msgid "Part selection" msgstr "Pieza hautatzea" msgid "Fixed step drag" msgstr "Urrats finkoko arrastatzea" msgid "Context Menu" msgstr "Testuinguru-menua" msgid "Toggle Auto-Drop" msgstr "Txandakatu kokatze automatikoa" msgid "Single sided scaling" msgstr "Alde bakarreko eskalatzea" msgid "Position" msgstr "Kokapena" msgid "Rotate (relative)" msgstr "Biratu (erlatiboa)" msgid "Scale ratios" msgstr "Eskalatze ratioak" msgid "Object operations" msgstr "Objektu-eragiketak" msgid "Scale" msgstr "Eskala" msgid "Volume operations" msgstr "Bolumen-eragiketak" msgid "Translate" msgstr "Itzuli" msgid "Group operations" msgstr "Multzo-eragiketak" msgid "Set orientation" msgstr "Orientazioa ezarri" msgid "Set scale" msgstr "Eskala ezarri" msgid "Reset position" msgstr "Berrezarri kokapena" msgid "Reset rotation" msgstr "Biraketa berrezarri" msgid "World" msgstr "Mundua" msgid "Object" msgstr "Objektua" msgid "Part" msgstr "Pieza" msgid "Relative" msgstr "Erlatiboa" msgid "Coordinate system used for transform actions." msgstr "Eraldatze-ekintzetan erabilitako koordenatu-sistema." msgid "Absolute" msgstr "Absolutua" msgid "Reset current rotation to the value when open the rotation tool." msgstr "Berrezarri uneko biraketa biraketa-tresna irekitzean zuen baliora." msgid "Reset current rotation to real zeros." msgstr "Berrezarri uneko biraketa benetako zeroetara." msgctxt "Noun" msgid "Scale" msgstr "Eskala" #. TRN - Input label. Be short as possible msgid "Size" msgstr "Tamaina" msgid "Uniform scale" msgstr "Eskala uniformea" msgid "Planar" msgstr "Plano" msgid "Dovetail" msgstr "Miru buztan" msgid "Auto" msgstr "Automatikoki" msgid "Manual" msgstr "Eskuz" msgid "Plug" msgstr "Konektatu" msgid "Dowel" msgstr "Larakoa" msgid "Snap" msgstr "Uneko argazkia" msgid "Prism" msgstr "Prisma" msgid "Frustum" msgstr "Enborra" msgid "Square" msgstr "Karratua" msgid "Hexagon" msgstr "Hexagonoa" msgid "Keep orientation" msgstr "Orientazioa mantendu" msgid "Place on cut" msgstr "Ebaketa-planoa bermatu" msgid "Flip upside down" msgstr "Irauli" msgid "Connectors" msgstr "Konektoreak" msgid "Type" msgstr "Mota" msgid "Style" msgstr "Estiloa" msgid "Shape" msgstr "Forma" #. TRN - Input label. Be short as possible #. Size in emboss direction #. TRN - Input label. Be short as possible msgid "Depth" msgstr "Sakonera" #. TRN - Input label. Be short as possible #. Angle between Y axis and text line direction. #. TRN - Input label. Be short as possible msgid "Rotation" msgstr "Biraketa" msgid "Groove" msgstr "Arteka" msgid "Width" msgstr "Zabalera" msgid "Flap Angle" msgstr "Hegalaren angelua" msgid "Groove Angle" msgstr "Artekaren angelua" msgid "Cut position" msgstr "Ebaketa-kokapena" msgid "Build Volume" msgstr "Eraikuntza-bulomena" msgid "Multiple" msgstr "Anitza" msgid "Count" msgstr "Kopurua" msgid "Gap" msgstr "Tartea" msgid "Spacing" msgstr "Tartea" msgid "" "Click to flip the cut plane\n" "Drag to move the cut plane" msgstr "" "Egin klik ebaketa-planoa iraultzeko\n" "Arrastatu ebaketa-planoa mugitzeko" msgid "" "Click to flip the cut plane\n" "Drag to move the cut plane\n" "Right-click a part to assign it to the other side" msgstr "" "Egin klik ebaketa-planoa iraultzeko\n" "Arrastatu ebaketa-planoa mugitzeko\n" "Egin klik eskuineko botoiarekin pieza batean, beste aldeari esleitzeko" msgid "Move cut plane" msgstr "Ebaketa-planoa mugitu" msgid "Mode" msgstr "Modua" msgid "Change cut mode" msgstr "Aldatu ebaketa modua" msgid "Tolerance" msgstr "Perdoia" msgid "Drag" msgstr "Arrastatu" msgid "Move cut line" msgstr "Mugitu ebaketa-lerroa" msgid "Draw cut line" msgstr "Marraztu ebaketa-lerroa" msgid "Add connector" msgstr "Konektorea gehitu" msgid "Remove connector" msgstr "Konektorea ezabatu" msgid "Move connector" msgstr "Konektorea mugitu" msgid "Add connector to selection" msgstr "Hautaketari konektorea erantsi" msgid "Remove connector from selection" msgstr "Hautaketatik konektorea ezabatu" msgid "Select all connectors" msgstr "Hautatu konektore guztiak" # AI Translated msgctxt "Cut tool" msgid "Cut" msgstr "Ebaki" msgid "Rotate cut plane" msgstr "Ebaketa-planoa biratu" msgid "Remove connectors" msgstr "Konektoreak ezabatu" msgid "Bulge" msgstr "Gainditu" msgid "Bulge proportion related to radius" msgstr "Erradioaren araberako gainditze-proportzioa" msgid "Space" msgstr "Hutsunea" msgid "Space proportion related to radius" msgstr "Erradioaren araberako hutsune-proportzioa" msgid "Confirm connectors" msgstr "Konektoreak berretsi" msgid "Flip cut plane" msgstr "Ebaketa-planoa irauli" msgid "Groove change" msgstr "Arteka aldaketa" #. TRN: This is an entry in the Undo/Redo stack. The whole line will be 'Edited: (name of whatever was edited)'. msgid "Edited" msgstr "Editatua" msgid "Reset cutting plane" msgstr "Ebaketa-planoa berrezarri" msgid "Edit connectors" msgstr "Konektoreak editatu" msgid "Add connectors" msgstr "Konektoreak gehitu" msgid "Upper part" msgstr "Goiko aldea" msgid "Lower part" msgstr "Beheko aldea" msgid "Keep" msgstr "Mantendu" msgid "Flip" msgstr "Irauli" msgid "After cut" msgstr "Ebaketaren ondoren" msgid "Cut to parts" msgstr "Piezetan ebaki" msgid "Reset cutting plane and remove connectors" msgstr "Berrezarri ebaketa-planoa eta konektoreak ezabatu" msgid "Reset Cut" msgstr "Ebaketa berrezarri" msgid "Perform cut" msgstr "Ebaketa gauzatu" msgid "Invalid connectors detected" msgstr "Konektore baliogabeak atzeman dira" #, c-format, boost-format msgid "%1$d connector is out of cut contour" msgid_plural "%1$d connectors are out of cut contour" msgstr[0] "%1$d konektorea ebaketa-ingurunetik kanpo dago" msgstr[1] "%1$d konektoreak ebaketa-ingurunetik kanpo daude" #, c-format, boost-format msgid "%1$d connector is out of object" msgid_plural "%1$d connectors are out of object" msgstr[0] "%1$d konektorea objektutik kanpo dago" msgstr[1] "%1$d konektoreak objektutik kanpo daude" msgid "Some connectors are overlapped" msgstr "Konektore batzuk gainjarrita daude" msgid "Select at least one object to keep after cutting." msgstr "Hautatu, gutxienez, ebaki ondoren gorde beharreko objektu bat." msgid "Cut plane is placed out of object" msgstr "Ebaketa-planoa objektutik kanpo kokatuta dago" msgid "Cut plane with groove is invalid" msgstr "Arteka duen ebaketa-planoa ez da baliozkoa" msgid "Connector" msgstr "Konektore" #, boost-format msgid "" "Objects(%1%) have duplicated connectors. Some connectors may be missing in slicing result.\n" "Please report to the OrcaSlicer team in which scenario this issue happened.\n" "Thank you." msgstr "" "Objektuek (%1%) konektore bikoiztuak dituzte. Baliteke konektore batzuk falta izatea xerratze-emaitzan.\n" "Jakinarazi OrcaSlicer taldeari zer egoeratan gertatu den arazoa.\n" "Eskerrik asko." msgid "Cut by Plane" msgstr "Plano bidezko ebaketa" msgid "Non-manifold edges be caused by cut tool: do you want to fix now?" msgstr "Ebaketa-tresnak ertz ez-manifoldak sortu ditu; konpondu nahi dituzu orain?" msgid "Repairing model object" msgstr "Modeloa konpontzen" msgid "Cut by line" msgstr "Lerro bidezko ebaketa" msgid "Delete connector" msgstr "Konektorea ezabatu" msgid "Entering Cut gizmo" msgstr "Ebaketa tresnan sartzen" msgid "Leaving Cut gizmo" msgstr "Ebaketa tresnatik irteten" msgid "Cut gizmo editing" msgstr "Ebaketa tresna editatzen" msgid "Mesh name" msgstr "Sarearen izena" msgid "Detail level" msgstr "Xehetasun maila" msgid "Decimate ratio" msgstr "Hamartarren ratioa" #, boost-format msgid "Processing model '%1%' with more than 1M triangles could be slow. It is highly recommended to simplify the model." msgstr "'%1%' modeloa 1M triangelu baino gehiagorekin prozesatzea motela izan liteke. Modeloa sinplifikatzea gomendatzen da." msgid "Simplify model" msgstr "Modeloa sinplifikatu" msgid "Simplify" msgstr "Sinplifikatu" msgid "Simplification is currently only allowed when a single part is selected" msgstr "Oraingoz, pieza bakarra hautatzen denean bakarrik egin daiteke sinplifikazioa" msgid "Extra high" msgstr "Oso altua" msgid "High" msgstr "Altua" msgid "Medium" msgstr "Ertaina" msgid "Low" msgstr "Baxua" msgid "Extra low" msgstr "Oso baxua" #, c-format, boost-format msgid "%d triangles" msgstr "%d triangelu" msgid "Show wireframe" msgstr "Erakutsi alambre-sarea" msgid "Unable to apply when processing preview" msgstr "Ezin da aplikatu prozesuaren aurrebistan" msgid "Operation already cancelling. Please wait a few seconds." msgstr "Eragiketa bertan behera uzten ari da. Mesedez, itxaron segundo batzuk." msgid "Face recognition" msgstr "Aurpegiak hauteman" msgid "Perform Recognition" msgstr "Azterketa gauzatu" msgid "Enforce seam" msgstr "Jostura indartu" msgid "Block seam" msgstr "Jostura blokeatu" msgid "Seam painting" msgstr "Jostura margotu" msgid "Remove selection" msgstr "Hautaketa ezabatu" msgid "Entering seam painting" msgstr "Jostura pintatzeko atalean sartzen" msgid "Leaving Seam painting" msgstr "Jostura pintatzeko ataletik irteten" msgid "Paint-on seam editing" msgstr "Margotutako josturen edizioa" #. TRN - Input label. Be short as possible #. Select look of letter shape msgid "Font" msgstr "Letra-tipoa" msgid "Thickness" msgstr "Lodiera" msgid "Text Gap" msgstr "Testu-espazioa" msgid "Angle" msgstr "Angelua" msgid "Embedded depth" msgstr "Inkrustatutako sakonera" msgid "Input text" msgstr "Testua txertatu" msgid "Surface" msgstr "Gainazala" msgid "Horizontal text" msgstr "Testu horizontala" msgid "Shift+" msgstr "Shift+" msgid "Mouse move up or down" msgstr "Sagua gora edo behera mugitu" msgid "Rotate text" msgstr "Testua biratu" msgid "Text shape" msgstr "Testuaren forma" #. TRN - Title in Undo/Redo stack after rotate with text around emboss axe msgid "Text rotate" msgstr "Testua biratu" #. TRN - Title in Undo/Redo stack after move with text along emboss axe - From surface msgid "Text move" msgstr "Testua mugitu" msgid "Set Mirror" msgstr "Ispilua ezarri" msgid "Embossed text" msgstr "Testua erliebean" msgid "Enter emboss gizmo" msgstr "Erliebe-tresnan sartu" msgid "Leave emboss gizmo" msgstr "Erliebe-tresna utzi" msgid "Embossing actions" msgstr "Erliebe-ekintzak" msgid "Position on surface" msgstr "Gainazaleko posizioa" msgid "Emboss" msgstr "Erliebea" msgid "NORMAL" msgstr "NORMALA" msgid "SMALL" msgstr "TXIKIA" msgid "ITALIC" msgstr "ETZANA" msgid "SWISS" msgstr "SUITZARRA" msgid "MODERN" msgstr "MODERNOA" msgid "First font" msgstr "Lehen letra-tipoa" msgid "Default font" msgstr "Lehenetsitako letra-tipoa" msgid "Advanced" msgstr "Aurreratua" msgid "Reset all options except the text and operation" msgstr "Berrezarri aukera guztiak, testua eta eragiketa izan ezik" msgid "The text cannot be written using the selected font. Please try choosing a different font." msgstr "Testua ezin da hautatutako letra-tipoarekin idatzi. Mesedez, saiatu berriro beste letra-mota bat aukeratuz." msgid "Embossed text cannot contain only white spaces." msgstr "Erliebean dagoen testuak ezin ditu zuriuneak bakarrik izan." msgid "Text contains character glyph (represented by '?') unknown by font." msgstr "Testuak glyph karakterea dauka ( '?' ikurrarekin irudikatuta) eta letra-tipoak ez du ezagutzen." msgid "Text input doesn't show font skew." msgstr "Testu-sarrerak ez du letra-tipoaren inklinazioa erakusten." msgid "Text input doesn't show font boldness." msgstr "Testu-sarrerak ez du letra-tipoaren lodiera erakusten." msgid "Text input doesn't show gap between lines." msgstr "Testu-sarrerak ez ditu lerro arteko hutsuneak erakusten." msgid "Too tall, diminished font height inside text input." msgstr "Altuegia, letra-tipoaren altuera murriztu da testuaren sarreraren barruan." msgid "Too small, enlarged font height inside text input." msgstr "Baxuegia, letra-tipoaren altuera handitu da testuaren sarreraren barruan." msgid "Text doesn't show current horizontal alignment." msgstr "Testuak ez du uneko lerrotze horizontala erakusten." msgid "Revert font changes." msgstr "Letra-tipoen aldaketak leheneratu." #, boost-format msgid "Font \"%1%\" can't be selected." msgstr "\"%1%\" letra-tipoa ezin da hautatu." msgid "Operation" msgstr "Eragiketa" #. TRN EmbossOperation #. ORCA msgid "Join" msgstr "Elkartu" msgid "Click to change text into object part." msgstr "Egin klik testua piezako objektu bihurtzeko." msgid "You can't change a type of the last solid part of the object." msgstr "Ezin da objektuaren azken zati solidoaren mota bat aldatu." msgctxt "EmbossOperation" msgid "Cut" msgstr "Ebaki" msgid "Click to change part type into negative volume." msgstr "Egin klik pieza-mota bolumen negatibora aldatzeko." msgid "Modifier" msgstr "Aldatzailea" msgid "Click to change part type into modifier." msgstr "Egin klik pieza-mota aldatzaile bihurtzeko." msgid "Change Text Type" msgstr "Testu-mota aldatu" #, boost-format msgid "Rename style (%1%) for embossing text" msgstr "Berrizendatu (%1%) estiloa erliebeko testurako" msgid "Name can't be empty." msgstr "Izena ezin da hutsik egon." msgid "Name has to be unique." msgstr "Izenak bakarra izan behar du." msgid "OK" msgstr "Ados" msgid "Rename style" msgstr "Berrizendatu estiloa" msgid "Rename current style." msgstr "Berrizendatu uneko estiloa." msgid "Can't rename temporary style." msgstr "Ezin da aldi baterako estiloa berrizendatu." msgid "First Add style to list." msgstr "Lehenik Gehitu estiloa zerrendan." #, boost-format msgid "Save %1% style" msgstr "Gorde %1% estiloa" msgid "No changes to save." msgstr "Ez dago aldaketarik gordetzeko." msgid "New name of style" msgstr "Estiloaren izen berria" msgid "Save as new style" msgstr "Gorde estilo berri gisa" msgid "Only valid font can be added to style." msgstr "Estiloari baliozko letra-tipoak soilik gehi dakizkioke." msgid "Add style to my list." msgstr "Gehitu estiloa nire zerrendan." msgid "Save as new style." msgstr "Gorde estilo berri gisa." msgid "Remove style" msgstr "Ezabatu estiloa" msgid "Can't remove the last existing style." msgstr "Ezin da ezabatu dagoen azken estiloa." #, boost-format msgid "Are you sure you want to permanently remove the \"%1%\" style?" msgstr "Ziur zaude \"%1%\" estiloa betirako ezabatu nahi duzula?" #, boost-format msgid "Delete \"%1%\" style." msgstr "Ezabatu \"%1%\" estiloa." #, boost-format msgid "Can't delete \"%1%\". It is last style." msgstr "Ezin da \"%1%\" ezabatu. Azken estiloa da." #, boost-format msgid "Can't delete temporary style \"%1%\"." msgstr "Ezin da aldi baterakoa den \"%1%\" estiloa ezabatu." #, boost-format msgid "Modified style \"%1%\"" msgstr "\"%1%\" estiloa aldatuta" #, boost-format msgid "Current style is \"%1%\"" msgstr "Uneko estiloa \"%1%\" da" #, boost-format msgid "" "Changing style to \"%1%\" will discard current style modification.\n" "\n" "Would you like to continue anyway?" msgstr "" "Estiloa \"%1%\"(e)ra aldatzean uneko estiloan egindako aldaketak baztertuko dira.\n" "\n" "Hala ere, jarraitzea gustatuko litzaizuke?" msgid "Not valid style." msgstr "Estiloa ez da baliozkoa." #, boost-format msgid "Style \"%1%\" can't be used and will be removed from a list." msgstr "Ezin da \"%1%\" estiloa erabili eta zerrendatik kenduko da." msgid "Unset italic" msgstr "Kendu letra etzana" msgid "Set italic" msgstr "Ezarri letra etzana" msgid "Unset bold" msgstr "Kendu letra lodia" msgid "Set bold" msgstr "Ezarri letra lodia" msgid "Revert text size." msgstr "Testuaren tamaina leheneratu." msgid "Revert embossed depth." msgstr "Erliebearen sakonera leheneratu." msgid "" "Advanced options cannot be changed for the selected font.\n" "Select another font." msgstr "" "Aukera aurreratuak ezin dira aldatu hautatutako letra-tipoarentzat.\n" "Hautatu beste letra-tipo bat." msgid "Revert using of model surface." msgstr "Modeloaren gainazalak erabiltzeari utzi." msgid "Revert Transformation per glyph." msgstr "Glifo bidezko transformazioa desegin." msgid "Set global orientation for whole text." msgstr "Ezarri orientazio globala testu osorako." msgid "Set position and orientation per glyph." msgstr "Ezarri posizioa eta orientazioa glifo bakoitzeko." msgctxt "Alignment" msgid "Left" msgstr "Ezkerrean" msgctxt "Alignment" msgid "Center" msgstr "Erdian" msgctxt "Alignment" msgid "Right" msgstr "Eskuinean" msgctxt "Alignment" msgid "Top" msgstr "Goian" msgctxt "Alignment" msgid "Middle" msgstr "Erdian" msgctxt "Alignment" msgid "Bottom" msgstr "Behean" msgid "Revert alignment." msgstr "Lerrokatzea alderantzikatu." #. TRN EmbossGizmo: font units msgid "points" msgstr "puntuak" msgid "Revert gap between characters" msgstr "Karaktereen arteko hutsunea leheneratu" msgid "Distance between characters" msgstr "Karaktereen arteko hutsunea" msgid "Revert gap between lines" msgstr "Lerroen arteko hutsunea leheneratu" msgid "Distance between lines" msgstr "Lerroen arteko hutsunea" msgid "Undo boldness" msgstr "Loditzea desegin" msgid "Tiny / Wide glyphs" msgstr "Glifo nimiñoak / zabalak" msgid "Undo letter's skew" msgstr "Desegin letren inklinazioa" msgid "Italic strength ratio" msgstr "Letra etzanaren gogortasun-ratioa" msgid "Undo translation" msgstr "Desegin itzulpena" msgid "Distance of the center of the text to the model surface." msgstr "Testuaren zentroaren eta modeloaren gainazalaren arteko distantzia." msgid "Undo rotation" msgstr "Desegin biraketa" msgid "Rotate text Clockwise." msgstr "Biratu testua erlojuaren orratzen noranzkoan." msgid "Unlock the text's rotation when moving text along the object's surface." msgstr "Desblokeatu testuaren biraketa testua objektuaren gainazalean zehar mugitzean." msgid "Lock the text's rotation when moving text along the object's surface." msgstr "Blokeatu testuaren biraketa testua objektuaren gainazalean zehar mugitzean." msgid "Select from True Type Collection." msgstr "Hautatu True Type bildumatik." msgid "Set text to face camera" msgstr "Testua kameraren aurrean ezarri" msgid "Orient the text towards the camera." msgstr "Testua kamerarantz orientatu." #, boost-format msgid "Font \"%1%\" can't be used. Please select another." msgstr "Ezin da \"%1%\" letra-tipoa erabili. Mesedez, hautatu beste bat." #, boost-format msgid "Can't load exactly same font (\"%1%\"). Application selected a similar one (\"%2%\"). You have to specify font for enable edit text." msgstr "Ezin da letra- tipo berdina kargatu (\"%1%\"). Aplikazioak antzeko bat hautatu du (\"%2%\"). Letra-tipoa zehaztu behar duzu editatzeko testua aktibatzeko." msgid "No symbol" msgstr "Ikurrik ez" msgid "Loading" msgstr "Kargatzen" msgid "In queue" msgstr "Ilaran" #. TRN - Input label. Be short as possible #. Height of one text line - Font Ascent msgid "Height" msgstr "Altuera" #. TRN - Input label. Be short as possible #. Copy surface of model on surface of the embossed text #. TRN - Input label. Be short as possible msgid "Use surface" msgstr "Gainazala erabili" #. TRN - Input label. Be short as possible #. Option to change projection on curved surface #. for each character(glyph) in text separately msgid "Per glyph" msgstr "Glifo bidez" #. TRN - Input label. Be short as possible #. Align Top|Middle|Bottom and Left|Center|Right msgid "Alignment" msgstr "Lerrokatzea" #. TRN - Input label. Be short as possible msgid "Char gap" msgstr "Karaktereen arteko tartea" #. TRN - Input label. Be short as possible msgid "Line gap" msgstr "Lerroen arteko tartea" #. TRN - Input label. Be short as possible msgid "Boldness" msgstr "Letraren lodiera" #. TRN - Input label. Be short as possible #. Like Font italic msgid "Skew ratio" msgstr "Inklinazio-ratioa" #. TRN - Input label. Be short as possible #. Distance from model surface to be able #. move text as part fully into not flat surface #. move text as modifier fully out of not flat surface #. TRN - Input label. Be short as possible msgid "From surface" msgstr "Gainazaletik" #. TRN - Input label. Be short as possible #. Keep vector from bottom to top of text aligned with printer Y axis msgid "Keep up" msgstr "Bertikaltasuna mantendu" #. TRN - Input label. Be short as possible. #. Some Font file contain multiple fonts inside and #. this is numerical selector of font inside font collections msgid "Collection" msgstr "Bilduma" #. TRN - Title in Undo/Redo stack after rotate with SVG around emboss axe msgid "SVG rotate" msgstr "SVG biratu" #. TRN - Title in Undo/Redo stack after move with SVG along emboss axe - From surface msgid "SVG move" msgstr "SVG mugitu" msgid "Enter SVG gizmo" msgstr "SVG erreminta ireki" msgid "Leave SVG gizmo" msgstr "SVG erreminta itxi" msgid "SVG actions" msgstr "SVG ekintzak" msgid "SVG" msgstr "SVG" #, boost-format msgid "Opacity (%1%)" msgstr "Opakutasuna (%1%)" #, boost-format msgid "Color gradient (%1%)" msgstr "Kolore-gradientea (%1%)" msgid "Undefined fill type" msgstr "Definitu gabeko betetze-mota" msgid "Linear gradient" msgstr "Gradiente lineala" msgid "Radial gradient" msgstr "Gradiente erradiala" msgid "Open filled path" msgstr "Ireki betetako bidea" msgid "Undefined stroke type" msgstr "Definitu gabeko pintzelkada mota" msgid "Path can't be healed from self-intersection and multiple points." msgstr "Bidea ezin da konpondu auto-gurutzaketa eta puntu anitzetatik." msgid "Final shape contains self-intersection or multiple points with same coordinate." msgstr "Azken formak auto-gurutzaketa edo koordenatu bera duten puntu ugari ditu." #, boost-format msgid "Shape is marked as invisible (%1%)." msgstr "Forma ikusezintzat markatuta dago (%1%)." #. TRN: The first placeholder is shape identifier, the second is text describing the problem. #, boost-format msgid "Fill of shape (%1%) contains unsupported: %2%." msgstr "(%1%) formaren betetzeak onartzen ez direnak ditu: %2%." #, boost-format msgid "Stroke of shape (%1%) is too thin (minimal width is %2% mm)." msgstr "(%1%) formaren trazua meheegia da (gutxieneko zabalera %2% mm-koa da)." #, boost-format msgid "Stroke of shape (%1%) contains unsupported: %2%." msgstr "(%1%) formaren trazuak onartzen ez direnak ditu: %2%." msgid "Face the camera" msgstr "Kamerarekin lerrokatu" #. TRN - Preview of filename after clear local filepath. msgid "Unknown filename" msgstr "Fitxategi-izen ezezaguna" #, boost-format msgid "SVG file path is \"%1%\"" msgstr "SVG fitxategiaren helbidea \"%1%\" da" msgid "Reload SVG file from disk." msgstr "Birkargatu SVG fitxategia diskotik." msgid "Change file" msgstr "Aldatu fitxategia" msgid "Change to another SVG file." msgstr "Aldatu beste .svg fitxategi batera." msgid "Forget the file path" msgstr "Ahaztu fitxategiaren helbidea" msgid "" "Do NOT save local path to 3MF file.\n" "Also disables 'reload from disk' option." msgstr "" "EZ gorde bide-izen lokala 3MF fitxategian.\n" "Gainera, 'Birkargatu diskotik' aukera desgaitzen du." #. TRN: An menu option to convert the SVG into an unmodifiable model part. msgid "Bake" msgstr "Labean sartu" #. TRN: Tooltip for the menu item. msgid "Bake into model as uneditable part" msgstr "Modeloari elkartu editatu ezin den pieza gisa" msgid "Save as" msgstr "Gorde honela" msgid "Save SVG file" msgstr "Gorde SVG fitxategia" msgid "Save as SVG file." msgstr "Gorde SVG fitxategi gisa." msgid "Size in emboss direction." msgstr "Tamaina erliebearen norabidean." #. TRN: The placeholder contains a number. #, boost-format msgid "Scale also changes amount of curve samples (%1%)" msgstr "Eskalak kurben laginen kantitatea ere aldatzen du (%1%)" msgid "Width of SVG." msgstr "SVGaren zabalera." msgid "Height of SVG." msgstr "SVGaren altuera." msgid "Lock/unlock the aspect ratio of the SVG." msgstr "Blokeatu/desblokeatu SVGaren aspektu-erlazioa." msgid "Reset scale" msgstr "Eskala berrezarri" msgid "Distance of the center of the SVG to the model surface." msgstr "SVGaren zentroaren eta modeloaren gainazalaren arteko distantzia." msgid "Reset distance" msgstr "Distantzia berrezarri" msgid "Lock/unlock rotation angle when dragging above the surface." msgstr "Blokeatu/desblokeatu biraketa-angelua gainazalaren gainean arrastatzean." msgid "Mirror vertically" msgstr "Islatu bertikalki" msgid "Mirror horizontally" msgstr "Islatu horizontalki" #. TRN: This is the name of the action that shows in undo/redo stack (changing part type from SVG to something else). msgid "Change SVG Type" msgstr "Aldatu SVG mota" #. TRN - Input label. Be short as possible msgid "Mirror" msgstr "Islatu" msgid "Choose SVG file for emboss:" msgstr "Aukeratu erlieberako SVG fitxategia:" #, boost-format msgid "File does NOT exist (%1%)." msgstr "Fitxategia EZ da existitzen (%1%)." #, boost-format msgid "Filename has to end with \".svg\" but you selected %1%" msgstr "Fitxategi-izenak \".svg\" ikurrarekin amaitu behar du, baina %1% hautatu duzu" #, boost-format msgid "Nano SVG parser can't load from file (%1%)." msgstr "Nano SVG analizatzaileak ezin du fitxategia kargatu (%1%)." #, boost-format msgid "SVG file does NOT contain a single path to be embossed (%1%)." msgstr "SVG fitxategiak EZ du erlieberako helbiderik (%1%)." msgid "No feature" msgstr "Ezaugarririk ez" msgid "Vertex" msgstr "Erpina" msgid "Edge" msgstr "Ertza" msgid "Plane" msgstr "Planoa" msgid "Point on edge" msgstr "Puntua ertzean" msgid "Point on circle" msgstr "Puntua zirkuluan" msgid "Point on plane" msgstr "Puntua planoan" msgid "Center of edge" msgstr "Ertzaren erdiko puntua" msgid "Center of circle" msgstr "Zirkuluaren zentroa" msgid "Select" msgstr "Hautatu" msgid "Select point" msgstr "Hautatu puntua" # AI Translated msgctxt "Keyboard Shortcut" msgid "Delete" msgstr "Ezabatu" msgid "Restart selection" msgstr "Berrabiarazi hautaketa" # AI Translated msgctxt "Keyboard Shortcut" msgid "Esc" msgstr "Ihes" msgid "Cancel a feature until exit" msgstr "Ezaugarri bat bertan behera utzi irten arte" msgid "Measure" msgstr "Neurtu" msgid "Please confirm explosion ratio = 1, and please select at least one object." msgstr "Mesedez, baieztatu esplosio-erlazioa = 1 dela, eta, mesedez, hautatu objektu bat gutxienez." msgid "Edit to scale" msgstr "Editatu eskalan" msgctxt "Verb" msgid "Scale all" msgstr "Eskalatu dena" msgid "None" msgstr "Bat ere ez" msgid "Diameter" msgstr "Diametroa" msgid "Length" msgstr "Luzera" msgid "Selection" msgstr "Hautaketa" msgid " (Moving)" msgstr " (Mugitzen)" msgid "" "Select 2 faces on objects and \n" " make objects assemble together." msgstr "" "Hautatu 2 aurpegi objektuetan eta\n" " lotu objektuak elkarrekin." msgid "" "Select 2 points or circles on objects and \n" " specify distance between them." msgstr "" "Hautatu 2 puntu edo zirkulu objektuetan eta\n" " zehaztu beraien arteko distantzia." msgid "Face" msgstr "Aurpegia" msgid " (Fixed)" msgstr " (Finkatuta)" msgid "Point" msgstr "Puntua" msgid "" "Feature 1 has been reset, \n" "feature 2 has been feature 1" msgstr "" "1 ezaugarria berrezarri da,\n" "2 ezaugarria 1 ezaugarria izan da" msgid "Copy to clipboard" msgstr "Kopiatu arbelean" msgid "Perpendicular distance" msgstr "Distantzia perpendikularra" msgid "Distance" msgstr "Distantzia" msgid "Direct distance" msgstr "Distantzia zuzena" msgid "Distance XYZ" msgstr "XYZ distantzia" msgid "Parallel" msgstr "Paraleloa" msgid "Center coincidence" msgstr "Zentroarekin bat egiten du" msgid "Feature 1" msgstr "1 ezaugarria" msgid "Reverse rotation" msgstr "Alderantzikatu biraketa" msgid "Rotate around center:" msgstr "Biratu zentro honekiko:" msgid "Parallel distance:" msgstr "Distantzia paraleloa:" msgid "Flip by Face 2" msgstr "Irauli 2 aurpegitik" msgid "Entering Measure gizmo" msgstr "Neurketa tresnan sartzen" msgid "Leaving Measure gizmo" msgstr "Neurketa tresna irteten" # AI Translated msgctxt "Assembly tool" msgid "Assemble" msgstr "Muntatu" msgid "Please confirm explosion ratio = 1 and select at least two volumes." msgstr "Mesedez, baieztatu esplosio-erlazioa = 1 dela, eta hautatu objektu bat gutxienez." msgid "Please select at least two volumes." msgstr "Hautatu bi bolumen gutxienez." msgid "(Moving)" msgstr "(Mugitzen)" msgid "Point and point assembly" msgstr "Puntuz puntuko muntaketa" msgid "Warning: please select two different meshes." msgstr "Abisua: mesedez, hautatu bi sare ezberdin." msgid "Warning: please select Plane's feature." msgstr "Abisua: mesedez, hautatu Planoaren ezaugarria." msgid "Warning: please select Point's or Circle's feature." msgstr "Abisua: mesedez, hautatu Puntuaren edo Zirkuluaren ezaugarria." msgid "" "It is recommended to assemble objects first,\n" "because they are restricted to the bed \n" "and only parts can be lifted." msgstr "" "Objektuak lehenik muntatzea gomendatzen da,\n" "ohera mugatuta baitaude\n" "eta piezak bakarrik altxa baitaitezke." msgid "Face and face assembly" msgstr "Aurpegiz aurpegiko muntaketa" msgid "Entering Assembly gizmo" msgstr "Muntaketa tresnan sartzen" msgid "Leaving Assembly gizmo" msgstr "Muntaketa tresnatik irteten" msgid "Ctrl+" msgstr "Ctrl+" msgid "Alt+" msgstr "Alt+" msgid "Notice" msgstr "Abisua" msgid "Undefined" msgstr "Zehaztugabea" #, boost-format msgid "%1% was replaced with %2%" msgstr "%1% %2%(e)k ordezkatu du" msgid "The configuration may be generated by a newer version of OrcaSlicer." msgstr "Konfigurazioa OrcaSlicer-en bertsio berriago batek sortua izan daiteke." msgid "Some values have been replaced. Please check them:" msgstr "Balio batzuk ordezkatu dira. Mesedez, egiaztatu:" msgid "Process" msgstr "Prozesua" msgid "Filament" msgstr "Filamentua" msgid "Machine" msgstr "Makina" msgid "The configuration package was loaded, but some values were not recognized." msgstr "Konfigurazio-paketea kargatu da, baina balio batzuk ez dira ezagutu." #, boost-format msgid "The configuration file “%1%” was loaded, but some values were not recognized." msgstr "\"%1%\" konfigurazio-fitxategia kargatu da, baina balio batzuk ez dira ezagutu." msgid "Loading configuration" msgstr "Konfigurazioa kargatzen" msgid "STEP files" msgstr "STEP fitxategiak" msgid "STL files" msgstr "STL fitxategiak" msgid "OBJ files" msgstr "OBJ fitxategiak" msgid "AMF files" msgstr "AMF fitxategiak" msgid "3MF files" msgstr "3MF fitxategiak" msgid "G-code 3MF files" msgstr "G-code 3MF fitxategiak" msgid "G-code files" msgstr "G-code fitxategiak" msgid "Supported files" msgstr "Onartutako fitxategiak" msgid "ZIP files" msgstr "ZIP fitxategiak" msgid "Project files" msgstr "Proiektu fitxategiak" msgid "Known files" msgstr "Fitxategi ezagunak" msgid "INI files" msgstr "INI fitxategiak" msgid "SVG files" msgstr "SVG fitxategiak" msgid "Texture" msgstr "Testura" msgid "Masked SLA files" msgstr "Maskaratutako SLA fitxategiak" msgid "Draco files" msgstr "Draco fitxategiak" msgid "OrcaSlicer will terminate because of running out of memory. It may be a bug. It will be appreciated if you report the issue to our team." msgstr "OrcaSlicer itxi egingo da memoriarik gabe gelditu delako. Bug bat izan daiteke. Eskertuko genizuke gure taldeari gaiaren berri ematen badiozu." msgid "Fatal error" msgstr "Errore oso larria" msgid "OrcaSlicer will terminate because of a localization error. It will be appreciated if you report the specific scenario this issue happened." msgstr "OrcaSlicer itxi egingo da lokalizazio-errore baten ondorioz. Eskertuko dizugu akats hau gertatu den eszenatoki zehatzaren berri ematen baduzu." msgid "Critical error" msgstr "Errore kritikoa" #, boost-format msgid "OrcaSlicer got an unhandled exception: %1%" msgstr "OrcaSlicer-ek kudeatu gabeko salbuespen bat du: %1%" msgid "Untitled" msgstr "Izenbururik gabea" msgid "" "Since version 2.4.0, OrcaSlicer syncs user profiles through Orca Cloud instead of Bambu Cloud.\n" "\n" "To migrate your existing profiles, log in to Orca Cloud and they will be transferred automatically. To learn more about how OrcaSlicer stores and syncs your profiles, or to migrate your presets manually, check out our wiki.\n" "\n" "If you did not use Bambu Cloud to sync profiles, this change does not affect you and you can safely ignore this message." msgstr "" "2.4.0 bertsiotik aurrera, OrcaSlicerrek erabiltzaile-profilak Orca Cloud bidez sinkronizatzen ditu, Bambu Cloud erabili beharrean.\n" "\n" "Lehendik dituzun profilak migratzeko, hasi saioa Orca Clouden eta automatikoki transferituko dira. OrcaSlicerrek profilak nola gordetzen eta sinkronizatzen dituen jakiteko, edo aurrezarpenak eskuz migratzeko, kontsultatu gure wikia.\n" "\n" "Profilak sinkronizatzeko Bambu Cloud erabili ez bazenuen, aldaketa honek ez dizu eragiten eta mezu honi ez ikusiarena egin diezaiokezu." msgid "Profile syncing change" msgstr "Profilaren sinkronizazio-aldaketa" msgid "Learn more" msgstr "Lortu informazio gehiago" msgid "Reloading network plug-in..." msgstr "Sareko plugina birkargatzen..." msgid "Downloading Network Plug-in" msgstr "Sareko plugina deskargatzen" msgid "Downloading Bambu Network Plug-in" msgstr "Bamburen Sareko plugina deskargatzen" msgid "Login information expired. Please login again." msgstr "Saioaren informazioa iraungi da. Hasi saioa berriro, mesedez." msgid "Incorrect password" msgstr "Pasahitza okerra da" #, c-format, boost-format msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "%s konexioak huts egin du! [SN:%s, code=%s]" msgid "" "Orca Slicer requires the Microsoft WebView2 Runtime to operate certain features.\n" "Click Yes to install it now." msgstr "" "OrcaSlicer-ek Microsoft WebView2 Runtime-a behar du zenbait ezaugarrik funtzionatzeko.\n" "Egin klik Bai botoian, orain instalatzeko." msgid "WebView2 Runtime" msgstr "WebView2 Runtime" msgid "" "The Microsoft WebView2 Runtime could not be installed.\n" "Some features, including the setup wizard, may appear blank until it is installed.\n" "Please install it manually from https://developer.microsoft.com/microsoft-edge/webview2/ and restart Orca Slicer." msgstr "" "Ezin izan da Microsoft WebView2 Runtime instalatu.\n" "Zenbait eginbide, konfigurazio-laguntzailea barne, hutsik ager daitezke instalatu arte.\n" "Instalatu eskuz https://developer.microsoft.com/microsoft-edge/webview2/ helbidetik eta berrabiarazi OrcaSlicer." #, c-format, boost-format msgid "Resources path does not exist or is not a directory: %s" msgstr "Baliabideen bidea ez dago edo ez da direktorio bat: %s" #, c-format, boost-format msgid "" "%s\n" "Do you want to continue?" msgstr "" "%s\n" "Jarraitu nahi duzu?" msgid "Remember my choice" msgstr "Gogoratu nire aukera" #, c-format, boost-format msgid "Click to download new version in default browser: %s" msgstr "Klik egin bertsio berria arakatzaile lehenetsian deskargatzeko: %s" msgid "OrcaSlicer needs an update" msgstr "OrcaSlicer-ek eguneraketa behar du" msgid "This is the newest version." msgstr "Hau bertsio berriena da." msgid "Info" msgstr "Informazioa" msgid "Loading Plugins" msgstr "Pluginak kargatzen" #, c-format, boost-format msgid "Plugin %s is no longer available." msgstr "%s plugina jada ez dago eskuragarri." #, c-format, boost-format msgid "Plugin %s access is unauthorized." msgstr "Ez dago %s pluginera sartzeko baimenik." msgid "Loading printer & filament profiles" msgstr "Inprimagailu- eta filamentu-profilak kargatzen" msgid "Creating main window" msgstr "Leiho nagusia sortzen" msgid "Loading current preset" msgstr "Uneko aurrezarpenak kargatzen" msgid "Showing main window" msgstr "Leiho nagusia erakusten" msgid "" "The OrcaSlicer configuration file may be corrupted and cannot be parsed.\n" "OrcaSlicer has attempted to recreate the configuration file.\n" "Please note, application settings will be lost, but printer profiles will not be affected." msgstr "" "OrcaSlicer-en konfigurazio-fitxategia hondatuta egon daiteke eta ezin da analizatu.\n" "OrcaSlicer konfigurazio-fitxategia birsortzen saiatu da.\n" "Kontuan izan aplikazioaren ezarpenak galduko direla, baina inprimagailuaren profilek ez dutela ondoriorik jasango." msgid "Rebuild" msgstr "Berreraiki" msgid "Loading current presets" msgstr "Uneko aurrezarpenak kargatzen" msgid "Loading a mode view" msgstr "Modu ikuspegi bat kargatzen" msgid "Choose one file (3MF):" msgstr "Aukeratu fitxategi bat (3MF):" msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY):" msgstr "Hautatu fitxategi bat edo gehiago (3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY):" msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF):" msgstr "Aukeratu fitxategi bat edo gehiago (3MF/STEP/STL/SVG/OBJ/AMF):" msgid "Choose ZIP file" msgstr "Aukeratu ZIP fitxategia" msgid "Choose one file (GCODE/3MF):" msgstr "Aukeratu fitxategi bat (GCODE/3MF):" msgid "Ext" msgstr "Ext" msgid "Some presets are modified." msgstr "Aurrezarpen batzuk aldatu egin dira." msgid "You can keep the modified presets for the new project, discard, or save changes as new presets." msgstr "Aldatutako aurrezarpenak proiektu berrian mantendu ditzakezu, baztertu edo aldaketak gorde aurrezarpen berri gisa." msgid "User logged out" msgstr "Erabiltzaileak saioa amaitu du" msgid "You are currently in Stealth Mode. To log into the Cloud, you need to disable Stealth Mode first." msgstr "Modu ezkutuan zaude. Hodeian saioa hasteko, modu ezkutua desgaitu behar duzu lehenik." msgid "Stealth Mode" msgstr "Modu isila" msgid "Quit Stealth Mode" msgstr "Modu isiletik irten" msgid "new or open project file is not allowed during the slicing process!" msgstr "proiektu-fitxategi berri bat sortzea edo irekitzea ez dago baimenduta xerratze-prozesuak irauten duen bitartean!" msgid "Open Project" msgstr "Proiektua ireki" msgid "The version of Orca Slicer is too low and needs to be updated to the latest version before it can be used normally." msgstr "OrcaSlicer-en bertsioa baxuegia da eta azken bertsiora eguneratu behar da normaltasunez erabili ahal izateko." msgid "Cloud sync conflict:" msgstr "Hodeiko sinkronizazio-gatazka:" #, c-format, boost-format msgid "Cloud sync conflict for preset \"%s\":" msgstr "Hodeiko sinkronizazio-gatazka \"%s\" aurrezarpenerako:" msgid "" "This preset has a newer version in OrcaCloud.\n" "Pull downloads the cloud copy. Force push overwrites it with your local preset." msgstr "" "Aurrezarpen honek bertsio berriagoa du OrcaClouden.\n" "Pull aukerak hodeiko kopia deskargatzen du. Force push aukerak zure tokiko aurrezarpenarekin gainidazten du." msgid "" "A preset with this name already exists in OrcaCloud.\n" "Pull downloads the cloud copy. Force push overwrites it with your local preset." msgstr "" "Izen hori duen aurrezarpen bat badago OrcaClouden.\n" "Pull aukerak hodeiko kopia deskargatzen du. Force push aukerak zure tokiko aurrezarpenarekin gainidazten du." msgid "" "A preset with the same name was previously deleted from the cloud.\n" "Delete will delete your local preset. Force push overwrites it with your local preset." msgstr "" "Izen bereko aurrezarpen bat hodeitik ezabatu zen lehenago.\n" "Ezabatu aukerak zure tokiko aurrezarpena ezabatuko du. Force push aukerak zure tokiko aurrezarpenarekin gainidatziko du." msgid "" "There was an unexpected or unidentified preset conflict.\n" "Pull downloads the cloud copy. Force push overwrites it with your local preset." msgstr "" "Ustekabeko edo identifikatu gabeko aurrezarpen-gatazka bat gertatu da.\n" "Pull aukerak hodeiko kopia deskargatzen du. Force push aukerak zure tokiko aurrezarpenarekin gainidazten du." msgid "" "Force push will overwrite the cloud copy with your local preset changes.\n" "Do you want to continue?" msgstr "" "Force push aukerak hodeiko kopia gainidatziko du zure tokiko aurrezarpenaren aldaketekin.\n" "Jarraitu nahi duzu?" #, c-format, boost-format msgid "" "Force push will overwrite the cloud copy of preset \"%s\" with your local changes.\n" "Do you want to continue?" msgstr "" "Force push aukerak \"%s\" aurrezarpenaren hodeiko kopia gainidatziko du zure tokiko aldaketekin.\n" "Jarraitu nahi duzu?" msgid "Resolve cloud sync conflict" msgstr "Ebatzi hodeiko sinkronizazio-gatazka" msgid "Syncing your account…" msgstr "Zure kontuarekin sinkronizatzen…" msgid "Migrating presets…" msgstr "Aurrezarpenak migratzen…" msgid "Fetching plugins…" msgstr "Pluginak eskuratzen…" msgid "Loading user presets…" msgstr "Erabiltzailearen aurrezarpenak kargatzen…" msgid "Retrieving printer information, please try again later." msgstr "Inprimagailuaren informazioa eskuratzen; saiatu berriro geroago." msgid "Please try updating OrcaSlicer and then try again." msgstr "Eguneratu OrcaSlicer eta saiatu berriro." msgid "The certificate has expired. Please check the time settings or update OrcaSlicer and try again." msgstr "Ziurtagiria iraungita dago. Egiaztatu ordu-ezarpenak edo eguneratu OrcaSlicer eta saiatu berriro." msgid "The certificate is no longer valid and the printing functions are unavailable." msgstr "Ziurtagiria jada ez da baliozkoa eta inprimatze-funtzioak ez daude erabilgarri." msgid "Internal error. Please try upgrading the firmware and OrcaSlicer version. If the issue persists, contact support." msgstr "Barne-errorea. Eguneratu firmwarea eta OrcaSlicer bertsioa. Arazoak jarraitzen badu, jarri harremanetan laguntza-zerbitzuarekin." msgid "" "To use OrcaSlicer with Bambu Lab printers, you need to enable LAN mode and Developer mode on your printer.\n" "\n" "Please go to your printer's settings and:\n" "1. Turn on LAN mode\n" "2. Enable Developer mode\n" "\n" "Developer mode allows the printer to work exclusively through local network access, enabling full functionality with OrcaSlicer." msgstr "" "OrcaSlicer Bambu Lab inprimagailuekin erabiltzeko, LAN modua eta Garatzaile modua gaitu behar dituzu inprimagailuan.\n" "\n" "Joan inprimagailuaren ezarpenetara eta:\n" "1. Aktibatu LAN modua\n" "2. Gaitu Garatzaile modua\n" "\n" "Garatzaile moduak inprimagailuak sare lokaleko sarbidearen bidez soilik funtzionatzea ahalbidetzen du, OrcaSlicerrekin funtzionaltasun osoa gaituz." msgid "Network Plug-in Restriction" msgstr "Sareko pluginean murrizketak" msgid "Privacy Policy Update" msgstr "Pribatutasun politikaren eguneraketa" #, c-format, boost-format msgid "your Orca Cloud profile (user ID: \"%s\")" msgstr "zure Orca Cloud profila (erabiltzaile-IDa: \"%s\")" msgid "your default profile" msgstr "zure profil lehenetsia" #, c-format, boost-format msgid "a user profile (folder: \"%s\")" msgstr "erabiltzaile-profil bat (karpeta: \"%s\")" #, c-format, boost-format msgid "" "Existing user presets were found in %s.\n" "Do you want to migrate them to your OrcaCloud profile?\n" "This will copy your presets so they are available under your new account." msgstr "" "Lehendik dauden erabiltzaile-aurrezarpenak aurkitu dira hemen: %s.\n" "Zure OrcaCloud profilera migratu nahi dituzu?\n" "Aurrezarpenak kopiatuko dira kontu berrian erabilgarri egon daitezen." msgid "Migrate User Presets" msgstr "Migratu erabiltzailearen aurrezarpenak" #, c-format, boost-format msgid "" "Failed to migrate user presets:\n" "%s" msgstr "" "Ezin izan dira erabiltzailearen aurrezarpenak migratu:\n" "%s" msgid "The number of user presets cached in the cloud has exceeded the upper limit, newly created user presets can only be used locally." msgstr "Hodeian gordetako erabiltzaile-aurrezarpen kopuruak goiko muga gainditu du, sortu berri diren erabiltzaile-aurrezarpenak lokalean bakarrik erabil daitezke." msgid "Sync user presets" msgstr "Erabiltzailearen aurrezarpenak sinkronizatu" #, c-format, boost-format msgid "The preset \"%s\" is too large to sync to the cloud (exceeds 1MB). Please reduce the preset size by removing custom configurations or use it locally only." msgstr "“%s” aurrezarpena handiegia da hodeiarekin sinkronizatzeko (1 MB baino gehiago). Murriztu aurrezarpenaren tamaina konfigurazio pertsonalizatuak kenduta, edo erabili lokalean soilik." #, c-format, boost-format msgid "%s updated from %s to %s" msgstr "%s eguneratu da: %s → %s" #, c-format, boost-format msgid "%s has been downloaded." msgstr "%s deskargatu da." #, c-format, boost-format msgid "Bundle %s is no longer available." msgstr "%s paketea jada ez dago erabilgarri." #, c-format, boost-format msgid "Bundle %s access is unauthorized." msgstr "Ez dago %s paketera sartzeko baimenik." msgid "Loading user preset" msgstr "Erabiltzailearen aurrezarpenak kargatzen" msgid "There is an update available. Open the preset bundle dialog to update it." msgstr "Eguneratze bat dago erabilgarri. Ireki aurrezarpen-paketeen elkarrizketa-koadroa eguneratzeko." #, c-format, boost-format msgid "%s has been removed." msgstr "%s kendu da." msgid "Switching application language" msgstr "Aplikazioaren hizkuntza aldatzen" msgid "Select the language" msgstr "Hautatu hizkuntza" msgid "Language" msgstr "Hizkuntza" #, c-format, boost-format msgid "Switching Orca Slicer to language %s failed." msgstr "Ezin izan da OrcaSlicer %s hizkuntzara aldatu." msgid "" "\n" "You may need to reconfigure the missing locales, likely by running the \"locale-gen\" and \"dpkg-reconfigure locales\" commands.\n" msgstr "" "\n" "Baliteke falta diren locale-ak berriro konfiguratu behar izatea, ziurrenik “locale-gen” eta “dpkg-reconfigure locales” komandoak exekutatuta.\n" msgid "Orca Slicer - Switching language failed" msgstr "OrcaSlicer - Ezin izan da hizkuntza aldatu" msgid "*" msgstr "*" msgid "Plugins" msgstr "Pluginak" #, c-format, boost-format msgid "" "Failed to open the Plugins dialog:\n" "%s" msgstr "" "Ezin izan da pluginen elkarrizketa-koadroa ireki:\n" "%s" msgid "Failed to open the Plugins dialog (unknown error)." msgstr "Ezin izan da pluginen elkarrizketa-koadroa ireki (errore ezezaguna)" msgid "Plugin Terminal" msgstr "Plugin-terminala" msgid "Changing application language" msgstr "Aplikazioaren hizkuntza aldatzen" msgid "The uploads are still ongoing" msgstr "Igoerak martxan daude oraindik" msgid "Stop them and continue anyway?" msgstr "Hala ere, geldiarazi eta jarraitu nahi duzu?" msgid "Ongoing uploads" msgstr "Martxan dauden igoerak" msgid "Select a G-code file:" msgstr "Hautatu G-code fitxategi bat:" msgid "Could not start URL download. Destination folder is not set. Please choose destination folder in Configuration Wizard." msgstr "Ezin izan da URLa deskargatzen hasi. Helburuko karpeta ez dago ezarrita. Mesedez, hautatu helburuko karpeta Konfigurazio-Laguntzailean." msgid "Import File" msgstr "Inportatu fitxategia" msgid "Delete" msgstr "Ezabatu" msgid "Choose files" msgstr "Hautatu fitxategiak" msgid "New Folder" msgstr "Karpeta berria" msgid "Open" msgstr "Ireki" msgid "Rename" msgstr "Berrizendatu" msgid "Orca Slicer GUI initialization failed" msgstr "OrcaSlicer-en interfaze grafikoaren hasieratzeak huts egin du" #, boost-format msgid "Fatal error, exception: %1%" msgstr "Errore oso larria, salbuespena: %1%" msgid "Quality" msgstr "Kalitatea" msgid "Shell" msgstr "Oskola" msgid "Infill" msgstr "Betegarria" msgid "Support" msgstr "Euskarria" msgid "Flush options" msgstr "Filamentua purgatzeko aukerak" msgid "Speed" msgstr "Abiadura" msgid "Strength" msgstr "Indarra" msgid "Top solid layers" msgstr "Goiko geruza solidoak" msgid "Top minimum shell thickness" msgstr "Goialdean gutxieneko oskolaren lodiera" msgid "Top Surface Density" msgstr "Goiko gainazalaren dentsitatea" msgid "Bottom solid layers" msgstr "Beheko geruza solidoak" msgid "Bottom minimum shell thickness" msgstr "Behealdean gutxieneko oskolaren lodiera" msgid "Bottom Surface Density" msgstr "Beheko gainazalaren dentsitatea" msgid "Ironing" msgstr "Lisaketa" msgid "Fuzzy skin" msgstr "Gainazal zimurra" msgid "Extruders" msgstr "Estrusoreak" msgid "Extrusion width" msgstr "Estrusio-zabalera" msgid "Wipe options" msgstr "Garbiketa aukerak" msgid "Bed adhesion" msgstr "Ohean itsastea" msgid "Add Part" msgstr "Gehitu pieza" msgid "Add Negative Part" msgstr "Gehitu pieza negatiboa" msgid "Add Modifier" msgstr "Gehitu aldatzailea" msgid "Add Support Blocker" msgstr "Gehitu euskarri blokeatzailea" msgid "Add Support Enforcer" msgstr "Gehitu euskarrien behartzailea" msgid "Add text" msgstr "Gehitu testua" msgid "Add negative text" msgstr "Gehitu testu negatiboa" msgid "Add text modifier" msgstr "Gehitu testu aldatzailea" msgid "Add SVG part" msgstr "Gehitu SVG pieza" msgid "Add negative SVG" msgstr "Gehitu SVG negatiboa" msgid "Add SVG modifier" msgstr "Gehitu SVG aldatzailea" msgid "Select settings" msgstr "Hautatu ezarpenak" msgid "Hide" msgstr "Eskutatu" msgid "Show" msgstr "Erakutsi" # AI Translated msgctxt "Keyboard Shortcut" msgid "Del" msgstr "Ezabatu" msgid "Delete the selected object" msgstr "Ezabatu hautatutako elementuak" # AI Translated msgctxt "Keyboard Shortcut" msgid "Backspace" msgstr "Atzera-tekla" msgid "Load..." msgstr "Kargatu..." msgid "Cube" msgstr "Kuboa" msgid "Cylinder" msgstr "Zilindroa" msgid "Cone" msgstr "Konoa" msgid "Disc" msgstr "Diskoa" msgid "Torus" msgstr "Toroidea" msgid "Orca Cube" msgstr "Orca kuboa" msgid "OrcaSliced Combo" msgstr "OrcaSliced Combo" msgid "Orca Badge" msgstr "Orca Badge" msgid "Orca Tolerance Test" msgstr "Orcaren Perdoi-testa" msgid "3DBenchy" msgstr "3DBenchy" msgid "Cali Cat" msgstr "Cali Cat" msgid "Autodesk FDM Test" msgstr "Autodesk FDM testa" msgid "Voron Cube" msgstr "Voron Kuboa" msgid "Stanford Bunny" msgstr "Stanford Untxia" msgid "Orca String Hell" msgstr "Orcako harien testa \"String Hell\"" msgid "" "This model features text embossment on the top surface. For optimal results, it is advisable to set the 'One Wall Threshold (min_width_top_surface)' to 0 for the 'Only One Wall on Top Surfaces' to work best.\n" "Yes - Change these settings automatically\n" "No - Do not change these settings for me" msgstr "" "Modelo honek testu-erliebea du goiko gainazalean. Emaitza optimoak lortzeko, komeni da 'Perimetroaren atalasea (min_width_top_surface)' 0ra ezartzea 'Goiko gainazaletako horma bakarra' aukerak hobeto funtziona dezan.\n" "Sí - Aldatu doikuntza horiek automatikoki\n" "Ez - Ez aldatu ezarpen hauek" msgid "Suggestion" msgstr "Iradokizuna" msgid "Text" msgstr "Testua" msgid "Height Range Modifier" msgstr "Altuera-tartearen aldatzailea" msgid "Add Settings" msgstr "Gehitu ezarpenak" msgid "Change Type" msgstr "Aldatu mota" msgid "Negative Part" msgstr "Pieza negatiboa" msgid "Support Blocker" msgstr "Euskarri blokeatzailea" msgid "Support Enforcer" msgstr "Euskarri behartzailea" msgid "Change part type" msgstr "Aldatu pieza mota" msgid "Set as An Individual Object" msgstr "Ezarri hau objektu indibidual gisa" msgid "Set as Individual Objects" msgstr "Ezarri hauek objektu indibidual gisa" msgid "Fill bed with copies" msgstr "Ohea kopiekin bete" msgid "Fill the remaining area of bed with copies of the selected object" msgstr "Bete gainerako ohe-eremua hautatutako objektuaren kopiekin" msgid "Printable" msgstr "Inprimagarria" msgid "Auto Drop" msgstr "Auto Drop" msgid "Automatically drops the selected object to the build plate." msgstr "Hautatutako objektua automatikoki jaisten du inprimatze-plakara." msgid "Fix Model" msgstr "Konpondu modeloa" msgid "Export as one STL" msgstr "Esportatu STL bakar gisa" msgid "Export as STLs" msgstr "Esportatu hainbat STL gisa" msgid "Export as one DRC" msgstr "Esportatu DRC bakar gisa" msgid "Export as DRCs" msgstr "Esportatu DRC gisa" msgid "Reload from disk" msgstr "Birkargatu diskotik" msgid "Reload the selected parts from disk" msgstr "Birkargatu hautatutako piezak diskotik" msgid "Replace 3D file" msgstr "Ordeztu 3D fitxategia" msgid "Replace the selected part with a new 3D file" msgstr "Ordeztu hautatutako pieza 3D fitxategi berri batekin" msgid "Replace all with 3D files" msgstr "Ordeztu guztiak 3D fitxategiekin" msgid "Replace all selected parts with 3D files from folder" msgstr "Ordeztu hautatutako pieza guztiak karpetako 3D fitxategiekin" msgid "Change filament" msgstr "Aldatu filamentua" msgid "Set filament for selected items" msgstr "Ezarri filamentua hautatutako elementuetarako" msgid "Default" msgstr "Lehenetsia" #, c-format, boost-format msgid "Filament %d" msgstr "%d filamentua" msgid "current" msgstr "uneko" msgid "Scale to build volume" msgstr "Inprimatze-bolumenera eskalatu" msgid "Scale an object to fit the build volume" msgstr "Objektu bat eskalatu inprimatze-bolumenera egokitzeko" msgid "Flush Options" msgstr "Purgatze-aukerak" msgid "Flush into objects' infill" msgstr "Objektuen betegarrian purgatu" msgid "Flush into this object" msgstr "Purgatu objektu honen barruan" msgid "Flush into objects' support" msgstr "Purgatu objektuen euskarrietan" msgid "Edit in Parameter Table" msgstr "Editatu Parametroen Taulan" msgid "Convert from Inches" msgstr "Bihurtu hazbeteetatik" msgid "Restore to Inch" msgstr "Leheneratu hazbeteetara" msgid "Convert from Meters" msgstr "Bihurtu metroetatik" msgid "Restore to Meter" msgstr "Leheneratu metroetara" msgid "Assemble" msgstr "Multzokatu" msgid "Assemble the selected objects into an object with multiple parts" msgstr "Multzokatu hautatutako objektuak pieza ugariko objektu bakarrean" msgid "Assemble the selected objects into an object with single part" msgstr "Multzokatu hautatutako objektuak pieza bakarreko objektu batean" msgid "Mesh boolean" msgstr "Sarearen eragiketa boolearrak" msgid "Mesh boolean operations including union and subtraction" msgstr "Sarearen eragiketa boolearrak, batuketa eta kenketa barne" msgid "Along X Axis" msgstr "X ardatzarekiko" msgid "Mirror along the X Axis" msgstr "Islatu X ardatzarekiko" msgid "Along Y Axis" msgstr "Y ardatzarekiko" msgid "Mirror along the Y Axis" msgstr "Islatu Y ardatzarekiko" msgid "Along Z Axis" msgstr "Z ardatzarekiko" msgid "Mirror along the Z Axis" msgstr "Islatu Z ardatzarekiko" msgid "Mirror object" msgstr "Islatu objektua" msgid "Edit text" msgstr "Editatu testua" msgid "Ability to change text, font, size, ..." msgstr "Testua, letra-tipoa, tamaina... aldatzeko gaitasuna" msgid "Edit SVG" msgstr "SVGa editatu" msgid "Change SVG source file, projection, size, ..." msgstr "Aldatu SVG iturburu-fitxategia, proiekzioa, tamaina, ..." msgid "Invalidate cut info" msgstr "Mozketaren informazioa baliogabetu" msgid "Add Primitive" msgstr "Gehitu oinarrizko geometria" msgid "Add Handy models" msgstr "Gehitu modelo praktikoak" msgid "Add Models" msgstr "Gehitu modeloak" msgid "Show Labels" msgstr "Erakutsi etiketak" msgid "To Objects" msgstr "Objektuetan" msgid "Split the selected object into multiple objects" msgstr "Zatitu hautatutako objektua hainbat objektutan" msgid "To Parts" msgstr "Piezetan" msgid "Split the selected object into multiple parts" msgstr "Zatitu hautatutako objektua hainbat piezetan" msgid "Split" msgstr "Zatitu" msgid "Split the selected object" msgstr "Zatitu hautatutako objektua" msgid "Auto orientation" msgstr "Automatikoki orientatu" msgid "Auto orient the object to improve print quality" msgstr "Automatikoki orientatu inprimatze-kalitatea hobetzeko" msgid "Edit" msgstr "Editatu" msgid "Merge with" msgstr "Batu honekin" msgid "Delete this filament" msgstr "Ezabatu filamentu hau" msgid "Select All" msgstr "Hautatu guztia" msgid "Select all objects on the current plate" msgstr "Uneko plakako objektu guztiak hautatu" msgid "Select All Plates" msgstr "Hautatu plaka guztiak" msgid "Select all objects on all plates" msgstr "Uneko plakako objektu guztiak hautatu" msgid "Delete All" msgstr "Ezabatu guztia" msgid "Delete all objects on the current plate" msgstr "Uneko plakako objektu guztiak ezabatu" msgid "Arrange" msgstr "Antolatu" msgid "Arrange current plate" msgstr "Antolatu uneko plaka" msgid "Reload All" msgstr "Birkargatu guztia" msgid "Reload all from disk" msgstr "Birkargatu guztia diskotik" msgid "Auto Rotate" msgstr "Biratu automatikoki" msgid "Auto rotate current plate" msgstr "Biratu automatikoki uneko plaka" msgid "Delete Plate" msgstr "Ezabatu plaka" msgid "Remove the selected plate" msgstr "Ezabatu hautatutako plaka" msgid "Add instance" msgstr "Gehitu instantzia" msgid "Add one more instance of the selected object" msgstr "Gehitu hautatutako objektuaren beste instantzia bat" msgid "Remove instance" msgstr "Kendu instantzia" msgid "Remove one instance of the selected object" msgstr "Kendu hautatutako objektuaren instantzia bat" msgid "Set number of instances" msgstr "Ezarri instantzia kopurua" msgid "Change the number of instances of the selected object" msgstr "Aldatu hautatutako objektuaren instantzia kopurua" msgid "Fill bed with instances" msgstr "Bete ohea instantziekin" msgid "Fill the remaining area of bed with instances of the selected object" msgstr "Bete oheko gainerako eremua hautatutako objektuaren instantziekin" msgid "Clone" msgstr "Klonatu" msgid "Simplify Model" msgstr "Modeloa sinplifikatu" msgid "Subdivision mesh" msgstr "Azpibanaketa-sarea" msgid "(Lost color)" msgstr "(Kolorea galdu da)" msgid "Center" msgstr "Zentratu" msgid "Drop" msgstr "Askatu" msgid "Edit Process Settings" msgstr "Editatu Prozesuaren Ezarpenak" msgid "Copy Process Settings" msgstr "Prozesuaren ezarpenak kopiatu" msgid "Paste Process Settings" msgstr "Prozesuaren ezarpenak itsatsi" msgid "Edit print parameters for a single object" msgstr "Editatu inprimatze-parametroak objektu bakar batentzat" msgid "Change Filament" msgstr "Filamentua aldatu" msgid "Set Filament for selected items" msgstr "Ezarri filamentua hautatutako elementuentzat" msgid "Automatically snaps the selected object to the build plate." msgstr "Hautatutako objektua automatikoki atxikitzen du inprimatze-plakara." msgid "Unlock" msgstr "Desblokeatu" msgid "Lock" msgstr "Blokeatu" msgid "Edit Plate Name" msgstr "Editatu plakaren izena" msgid "Name" msgstr "Izena" msgid "Fila." msgstr "Fila." #, c-format, boost-format msgid "%1$d error repaired" msgid_plural "%1$d errors repaired" msgstr[0] "%1$d errorea konponduta" msgstr[1] "%1$d erroreak konponduta" #, c-format, boost-format msgid "Error: %1$d non-manifold edge." msgid_plural "Error: %1$d non-manifold edges." msgstr[0] "Errorea: %1$d geometria okerra duen ertza." msgstr[1] "Errorea: %1$d geometria okerra duten ertzak." msgid "Remaining errors" msgstr "Geratzen diren erroreak" #, c-format, boost-format msgid "%1$d non-manifold edge" msgid_plural "%1$d non-manifold edges" msgstr[0] "%1$d geometria okerra duen ertz" msgstr[1] "%1$d geometria okerra duten ertz" msgid "Click the icon to repair model object" msgstr "Egin klik ikonoan modeloaren objektua konpontzeko" msgid "Right click the icon to drop the object settings" msgstr "Egin eskuineko klik ikonoan objektuaren ezarpenak kentzeko" msgid "Click the icon to reset all settings of the object" msgstr "Egin klik ikonoan objektuaren ezarpen guztiak berrezartzeko" msgid "Right click the icon to drop the object printable property" msgstr "Egin eskuineko klik ikonoan objektuaren inprimagarritasun-propietatea kentzeko" msgid "Click the icon to toggle printable properties of the object" msgstr "Egin klik ikonoan objektuaren inprimagarritasun-propietateak txandakatzeko" msgid "Click the icon to edit support painting of the object" msgstr "Egin klik ikonoan objektuaren euskarrien margoketa editatzeko" msgid "Click the icon to edit color painting for the object" msgstr "Egin klik ikonoan objektuaren kolore-pintura editatzeko" msgid "Click the icon to shift this object to the bed" msgstr "Egin klik ikonoan objektua ohera eramateko" msgid "Rename Object" msgstr "Aldatu objektuaren izena" msgid "Rename Part" msgstr "Berrizendatu pieza" msgid "Paste settings" msgstr "Itsatsi ezarpenak" msgid "Shift objects to bed" msgstr "Eraman objektuak ohera" msgid "Object order changed" msgstr "Objektuen ordena aldatu da" msgid "Layer setting added" msgstr "Geruzaren ezarpena gehitu da" msgid "Part setting added" msgstr "Piezaren ezarpena gehitu da" msgid "Object setting added" msgstr "Objektuaren ezarpena gehitu da" msgid "Height range settings added" msgstr "Altuera-barrutiaren ezarpenak gehitu dira" msgid "Part settings added" msgstr "Piezaren ezarpenak gehitu dira" msgid "Object settings added" msgstr "Objektuaren ezarpenak gehitu dira" msgid "Load Part" msgstr "Kargatu pieza" msgid "Load Modifier" msgstr "Kargatu aldatzailea" msgid "Loading file" msgstr "Fitxategia kargatzen" msgid "Error!" msgstr "Errorea!" msgid "Failed to get the model data in the current file." msgstr "Ezin izan dira uneko fitxategiko modeloaren datuak lortu." msgid "Add primitive" msgstr "Gehitu oinarrizko geometria" msgid "Generic" msgstr "Generikoa" msgid "Switch to per-object setting mode to edit modifier settings." msgstr "Aldatu objektuaren arabera doitzeko modura, aldatzailearen ezarpenak editatzeko." msgid "Switch to per-object setting mode to edit process settings of selected objects." msgstr "Aldatu objektuaren arabera doitzeko modura, hautatutako objektuen prozesuaren ezarpenak editatzeko." msgid "Remove paint-on fuzzy skin" msgstr "Kendu margotutako gainazal zimurra" msgid "Delete Settings" msgstr "Ezabatu ezarpenak" msgid "Remove height range" msgstr "Ezabatu altuera-tartea" msgid "Delete connector from object which is a part of cut" msgstr "Ebaketaren zati den objektutik konektorea ezabatu" msgid "Delete solid part from object which is a part of cut" msgstr "Ebaketaren zati den objektutik pieza solidoa ezabatu" msgid "Delete negative volume from object which is a part of cut" msgstr "Ebaketaren zati den objektutik bolumen negatiboa ezabatu" msgid "To save cut correspondence you can delete all connectors from all related objects." msgstr "Ebaketa-korrespondentzia gordetzeko, lotutako objektu guztien konektore guztiak ezaba ditzakezu." msgid "" "This action will break a cut correspondence.\n" "After that, model consistency can't be guaranteed.\n" "\n" "To manipulate with solid parts or negative volumes you have to invalidate cut information first." msgstr "" "Ekintza honek ebaketa-korrespondentzia bat apurtuko du.\n" "Horren ostean modeloaren trinkotasuna ezingo da bermatu.\n" "\n" "Pieza solidoak edo bolumen negatiboak manipulatzeko, ebaketa-informazioa baliogabetu behar duzu lehenik." msgid "Delete all connectors" msgstr "Ezabatu konektore guztiak" msgid "Deleting the last solid part is not allowed." msgstr "Ezin da azken pieza solidoa ezabatu." msgid "Delete part" msgstr "Ezabatu pieza" msgid "The target object contains only one part and can not be split." msgstr "Helburuko objektuak pieza bakarra du eta ezin da zatitu." msgid "Split to parts" msgstr "Piezetan zatitu" msgid "Assembly" msgstr "Multzoa" msgid "Merge parts to an object" msgstr "Batu piezak objektu batean" msgid "Add layers" msgstr "Geruzak gehitu" msgid "Cut Connectors information" msgstr "Ebaketa-konektoreen informazioa" msgid "Object manipulation" msgstr "Objektuaren manipulazioa" msgid "Group manipulation" msgstr "Multzoaren manipulazioa" msgid "Object Settings to Modify" msgstr "Aldatu beharreko objektuaren ezarpenak" msgid "Part Settings to Modify" msgstr "Aldatu beharreko piezaren ezarpenak" msgid "Layer Range Settings to Modify" msgstr "Aldatu beharreko geruzen ezarpenak" msgid "Part manipulation" msgstr "Piezen manipulazioa" msgid "Instance manipulation" msgstr "Instantzien manipulazioa" msgid "Height ranges" msgstr "Altuera-tarteak" msgid "Settings for height range" msgstr "Altuera-tartearen ezarpenak" msgid "Delete selected" msgstr "Ezabatu hautaketa" msgid "Layer" msgstr "Geruza" msgid "Selection conflicts" msgstr "Gatazkak hautapenean" msgid "If the first selected item is an object, the second should also be an object." msgstr "Hautatutako lehen elementua objektu bat bada, bigarrena ere objektua izan beharko litzateke." msgid "If the first selected item is a part, the second should be a part in the same object." msgstr "Hautatutako lehen elementua pieza bat bada, bigarrena objektu bereko pieza bat izan beharko litzateke." msgid "The type of the last solid object part cannot be changed." msgstr "Objektu solidoaren azken pieza zein motatakoa den ezin da aldatu." msgid "Type:" msgstr "Mota:" msgid "Choose part type" msgstr "Aukeratu pieza mota" msgid "Instances to Separated Objects" msgstr "Instantziak objektu bereizi bihurtu" msgid "Enter new name" msgstr "Sartu izen berria" msgid "Renaming" msgstr "Berrizendatu" msgid "The following model object has been repaired" msgid_plural "The following model objects have been repaired" msgstr[0] "Ondorengo objektu-modeloa konpondu da" msgstr[1] "Ondorengo objektu-modeloak konpondu dira" msgid "Failed to repair the following model object" msgid_plural "Failed to repair the following model objects" msgstr[0] "Ezin izan da ondorengo objektu-modeloa konpondu" msgstr[1] "Ezin izan dira ondorengo objektu-modeloak konpondu" msgid "Repairing was canceled" msgstr "Konponketa bertan behera geratu zen" #, c-format, boost-format msgid "\"%s\" will exceed 1 million faces after this subdivision, which may increase slicing time. Do you want to continue?" msgstr "\"%s\" objektuak milioi bat aurpegi baino gehiago izango ditu azpizatiketa honen ondoren, eta horrek xerratze-denbora handitu dezake. Jarraitu nahi duzu?" #, c-format, boost-format msgid "\"%s\" part's mesh contains errors. Please repair it first." msgstr "\"%s\" piezaren sareak erroreak ditu. Konpondu lehenik." msgid "Change Filaments" msgstr "Filamentuak aldatu" msgid "Additional process preset" msgstr "Prozesuaren aurrezarpen gehigarriak" msgid "Remove parameter" msgstr "Ezabatu parametroa" msgid "to" msgstr "nora" msgid "Add height range" msgstr "Gehitu altuera-tartea" msgid "Invalid numeric." msgstr "Zenbakia ez da baliozkoa." msgid "One cell can only be copied to one or more cells in the same column." msgstr "Gelaxka bat zutabe bereko gelaxka batera edo gehiagotara bakarrik kopia daiteke." msgid "Copying multiple cells is not supported." msgstr "Hainbat gelaxka kopiatzea ez dago onartuta." msgid "Outside" msgstr "Kanpoan" msgid "Layer height" msgstr "Geruza-altuera" msgid "Wall loops" msgstr "Hormako begiztak" msgid "Infill density(%)" msgstr "Betegarriaren dentsitatea (%)" msgid "Auto Brim" msgstr "Itsaspen ertz automatikoa" msgid "Mouse ear" msgstr "Saguaren belarria" msgid "Painted" msgstr "Margotua" msgid "Outer brim only" msgstr "Kanpoaldeko itsaspen ertza soilik" msgid "Inner brim only" msgstr "Barrualdeko itsaspen ertza soilik" msgid "Outer and inner brim" msgstr "Kanpoaldeko eta barrualdeko itsaspen ertzak" msgid "No-brim" msgstr "Itsaspen ertzik gabe" msgid "Outer wall speed" msgstr "Kanpoko hormako abiadura" msgid "Plate" msgstr "Plaka" msgid "Brim" msgstr "Itsaspen ertza" msgid "Object/Part Settings" msgstr "Objektuaren/Piezaren ezarpenak" msgid "Reset parameter" msgstr "Berrezarri parametroa" msgid "Multicolor Print" msgstr "Kolore anitzeko inprimaketa" msgid "Line Type" msgstr "Lerro-mota" #, c-format, boost-format msgid "1x1 Grid: %d mm" msgstr "1x1 sareta: %d mm" msgid "More" msgstr "Gehiago" msgid "Open Preferences" msgstr "Ireki Hobespenak" msgid "Open next tip" msgstr "Ireki hurrengo aholkua" msgid "Open documentation in web browser" msgstr "Ireki Dokumentazioa web nabigatzailean" msgid "Color" msgstr "Kolorea" msgid "Pause" msgstr "Pausa" msgid "Template" msgstr "Txantiloia" msgid "Custom" msgstr "Pertsonalizatua" msgid "Pause:" msgstr "Pausa:" msgid "Custom Template:" msgstr "Txantiloi pertsonalizatua:" msgid "Custom G-code:" msgstr "G-code pertsonalizatua:" msgid "Custom G-code" msgstr "G-code pertsonalizatua" msgid "Enter Custom G-code used on current layer:" msgstr "Sartu uneko geruzan erabilitako G kode pertsonalizatua:" msgid "Jump to layer" msgstr "Geruzara jauzi egin" msgid "Please enter the layer number." msgstr "Mesedez, sartu geruza zenbakia." msgid "Add Pause" msgstr "Gehitu Pausa" msgid "Insert a pause command at the beginning of this layer." msgstr "Txertatu pausa-komando bat geruza honen hasieran." msgid "Add Custom G-code" msgstr "Gehitu G-code pertsonalizatua" msgid "Insert custom G-code at the beginning of this layer." msgstr "Txertatu G-code pertsonalizatua geruza honen hasieran." msgid "Add Custom Template" msgstr "Gehitu Txantiloi Pertsonalizatua" msgid "Insert template custom G-code at the beginning of this layer." msgstr "Txertatu txantiloiko G-code pertsonalizatua geruza honen hasieran." msgid "Filament " msgstr "Filamentua " msgid "Change filament at the beginning of this layer." msgstr "Aldatu filamentua geruza honen hasieran." msgid "Delete Pause" msgstr "Ezabatu Pausa" msgid "Delete Custom Template" msgstr "Ezabatu Txantiloi Pertsonalizatua" msgid "Edit Custom G-code" msgstr "Editatu G-code Pertsonalizatua" msgid "Delete Custom G-code" msgstr "Ezabatu G-code Pertsonalizatua" msgid "Delete Filament Change" msgstr "Ezabatu filamentu aldaketa" msgid "No printer" msgstr "Inprimagailurik ez" msgid "..." msgstr "..." msgid "Failed to connect to the server" msgstr "Huts egin du zerbitzariarekin konektatzean" msgid "Check the status of current system services" msgstr "Kontsultatu sistemaren egungo zerbitzuen egoera" msgid "code" msgstr "kodea" msgid "Failed to connect to cloud service" msgstr "Huts egin du hodeiko zerbitzura konektatzean" msgid "Please click on the hyperlink above to view the cloud service status" msgstr "Egin klik goiko hiperestekan hodeiko zerbitzuaren egoera ikusteko" msgid "Failed to connect to the printer" msgstr "Huts egin du inprimagailura konektatzean" msgid "Connection to printer failed" msgstr "Inprimagailuaren konexioak huts egin du" msgid "Please check the network connection of the printer and Orca." msgstr "Egiaztatu inprimagailuaren eta Orca-ren sare-konexioa." msgid "Connecting..." msgstr "Konektatzen..." msgid "Auto Refill" msgstr "Betetze automatikoa" msgid "Load" msgstr "Kargatu" msgid "Unload" msgstr "Deskargatu" msgid "Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically load or unload filament." msgstr "Aukeratu AMSren arteka bat eta sakatu \"Kargatu\" edo \"Deskargatu\" botoia filamentua automatikoki kargatzeko edo deskargatzeko." msgid "Filament type is unknown which is required to perform this action. Please set target filament's informations." msgstr "Filamentu mota ezezaguna da, eta beharrezkoa da ekintza hau egiteko. Ezarri helburuko filamentuaren informazioa." msgid "AMS has not been initialized. Please initialize it before use." msgstr "AMS ez da hasieratu. Hasieratu erabili aurretik." msgid "Changing fan speed during printing may affect print quality, please choose carefully." msgstr "Inprimatzean haizagailuaren abiadura aldatzeak inprimatze-kalitateari eragin diezaioke; hautatu kontuz." msgid "Change Anyway" msgstr "Aldatu hala ere" msgid "Off" msgstr "Desaktibatuta" msgid "Filter" msgstr "Iragazi" msgid "Enabling filtration redirects the right fan to filter gas, which may reduce cooling performance." msgstr "Iragazketa gaitzean, eskuineko haizagailua gasa iragaztera bideratzen da, eta horrek hozte-errendimendua murriztu dezake." msgid "Enabling filtration during printing may reduce cooling and affect print quality. Please choose carefully." msgstr "Inprimatzean iragazketa gaitzeak hoztea murriztu eta inprimatze-kalitateari eragin diezaioke. Hautatu kontuz." msgid "The selected material only supports the current fan mode, and it can't be changed during printing." msgstr "Hautatutako materialak uneko haizagailu modua bakarrik onartzen du, eta ezin da inprimatzean aldatu." msgid "Cooling" msgstr "Hoztea" msgid "Heating" msgstr "Berotzen" msgid "Exhaust" msgstr "Erauzketa" msgid "Full Cooling" msgstr "Hozte osoa" msgid "Init" msgstr "Hasieratu" msgid "Chamber" msgstr "Ganbera" msgid "Innerloop" msgstr "Barruko begizta" msgid "Top" msgstr "Goikoa" msgid "The fan controls the temperature during printing to improve print quality. The system automatically adjusts the fan's switch and speed according to different printing materials." msgstr "Haizagailuak tenperatura kontrolatzen du inprimatzean, inprimatze-kalitatea hobetzeko. Sistemak automatikoki doitzen ditu haizagailuaren piztea eta abiadura, inprimatze-materialaren arabera." msgid "Cooling mode is suitable for printing PLA/PETG/TPU materials and filters the chamber air." msgstr "Hozte modua egokia da PLA/PETG/TPU materialak inprimatzeko, eta ganberako airea iragazten du." msgid "Heating mode is suitable for printing ABS/ASA/PC/PA materials and circulates filters the chamber air." msgstr "Berotze modua egokia da ABS/ASA/PC/PA materialak inprimatzeko, eta ganberako airea zirkularazi eta iragazten du." msgid "Strong cooling mode is suitable for printing PLA/TPU materials. In this mode, the printouts will be fully cooled." msgstr "Hozte biziko modua egokia da PLA/TPU materialak inprimatzeko. Modu honetan, inprimatutako piezak erabat hoztuko dira." msgid "Cooling mode is suitable for printing PLA/PETG/TPU materials." msgstr "Hozte modua egokia da PLA/PETG/TPU materialak inprimatzeko." msgctxt "air_duct" msgid "Right(Aux)" msgstr "Eskuinekoa (Osag.)" msgctxt "air_duct" msgid "Right(Filter)" msgstr "Eskuina (iragazkia)" msgctxt "air_duct" msgid "Left(Aux)" msgstr "Ezkerrekoa (Osag.)" # AI Translated msgctxt "Hotend Heat Breaker Fan" msgid "Hotend" msgstr "Hotend" msgid "Parts" msgstr "Piezak" msgid "Aux" msgstr "Osag." msgid "Nozzle1" msgstr "Pita1" msgid "MC Board" msgstr "MC plaka" msgid "Heat" msgstr "Berotu" msgid "Fan" msgstr "Haizagailua" msgid "Idling..." msgstr "Zereginik gabe..." msgid "Heat the nozzle" msgstr "Berotu pita" msgid "Cut filament" msgstr "Moztu filamentua" msgid "Pull back the current filament" msgstr "Atera uneko filamentua" msgid "Push new filament into extruder" msgstr "Sartu filamentu berria estrusorean" msgid "Grab new filament" msgstr "Filamentu berria kargatu" msgid "Purge old filament" msgstr "Purgatu filamentu zaharra" msgid "Confirm extruded" msgstr "Estrusioa konfirmatu" msgid "Check filament location" msgstr "Filamentuaren lokalizazioa egiaztatu" msgid "Switch" msgstr "Aldatu" msgid "hotend" msgstr "hotend-a" msgid "Wait for AMS cooling" msgstr "Itxaron AMS hoztu arte" msgid "Switch current filament at Filament Track Switch" msgstr "Aldatu uneko filamentua Filament Track Switch-en" msgid "Pull back current filament at Filament Track Switch" msgstr "Atzera erakarri uneko filamentua Filament Track Switch-en" msgid "Switch track at Filament Track Switch" msgstr "Aldatu bidea Filament Track Switch-en" msgid "The maximum temperature cannot exceed " msgstr "Gehieneko tenperaturak ezin du hau gainditu: " msgid "The minmum temperature should not be less than " msgstr "Gutxieneko tenperaturak ezin du hau baino txikiagoa izan: " msgid "Type to filter..." msgstr "Idatzi iragazteko..." msgid "All" msgstr "Guztiak" msgid "No selected items..." msgstr "Ez dago hautatutako elementurik..." msgid "All items selected..." msgstr "Elementu guztiak hautatuta..." msgid "No matching items..." msgstr "Ez dago bat datorren elementurik..." msgid "Deselect All" msgstr "Desautatu dena" msgid "Select visible" msgstr "Hautatu ikusgai daudenak" msgid "Deselect visible" msgstr "Desautatu ikusgai daudenak" msgid "Filter selected" msgstr "Iragazi hautatutakoak" msgid "Filter nonSelected" msgstr "Iragazi hautatu gabekoak" msgid "Simple settings" msgstr "Ezarpen sinpleak" msgid "Advanced settings" msgstr "Ezarpen aurreratuak" msgid "Expert settings" msgstr "Aditu-ezarpenak" msgid "Developer mode" msgstr "Garatzaile modua" msgid "Launch troubleshoot center" msgstr "Ireki arazoak konpontzeko zentroa" msgid "Set nozzle count" msgstr "Ezarri pita kopurua" msgid "Please set nozzle count" msgstr "Ezarri pita kopurua" msgid "Error: Can not set both nozzle count to zero." msgstr "Errorea: bi pita kopuruak ezin dira zeroan ezarri." #, c-format, boost-format msgid "Error: Nozzle count can not exceed %d." msgstr "Errorea: pita kopuruak ezin du %d gainditu." msgid "Confirm" msgstr "Berretsi" msgid "Extruder" msgstr "Estrusorea" msgid "Nozzle Selection" msgstr "Pita-hautapena" msgid "Available Nozzles" msgstr "Pita erabilgarriak" msgid "Nozzle Info" msgstr "Pitaren informazioa" msgid "Sync Nozzle status" msgstr "Sinkronizatu piten egoera" msgid "Caution: Mixing nozzle diameters in one print is not supported. If the selected size is only on one extruder, single-extruder printing will be enforced." msgstr "Kontuz: ezin dira pitaren diametro desberdinak nahasi inprimaketa berean. Hautatutako neurria estrusore bakarrean badago, estrusore bakarreko inprimaketa erabiltzera behartuko da." #, c-format, boost-format msgid "Refresh %d/%d..." msgstr "Freskatu %d/%d..." msgid "Unknown nozzle detected. Refresh to update info (unrefreshed nozzles will be excluded during slicing). Verify nozzle diameter & flow rate against displayed values." msgstr "Pita ezezaguna detektatu da. Freskatu informazioa eguneratzeko (freskatu gabeko pitak xerratzean baztertuko dira). Egiaztatu pitaren diametroa eta fluxu-tasa bistaratutako balioekin bat datozela." msgid "Unknown nozzle detected. Refresh to update (unrefreshed nozzles will be skipped in slicing)." msgstr "Pita ezezaguna detektatu da. Freskatu eguneratzeko (freskatu gabeko pitak xerratzean saltatuko dira)." msgid "Please confirm whether the required nozzle diameter and flow rate match the currently displayed values." msgstr "Baieztatu beharrezko pitaren diametroa eta fluxu-tasa unean bistaratutako balioekin bat datozela." msgid "Your printer has different nozzles installed. Please select a nozzle for this print." msgstr "Zure inprimagailuak pita desberdinak ditu instalatuta. Hautatu pita bat inprimaketa honetarako." msgid "Ignore" msgstr "Ezikusi" msgid "Done." msgstr "Eginda." msgid "" "All the selected objects are on a locked plate.\n" "Cannot auto-arrange these objects." msgstr "" "Hautatutako objektu guztiak blokeatutako plaka batean daude.\n" "Ezin dira objektu hauek automatikoki antolatu." msgid "No arrangeable objects are selected." msgstr "Ez da hautatu antola daitekeen objekturik." msgid "" "This plate is locked.\n" "Cannot auto-arrange on this plate." msgstr "" "Plaka hau blokeatuta dago.\n" "Plaka honetan ezin da automatikoki antolatu." msgid "Arranging..." msgstr "Antolatzen..." msgid "Arranging" msgstr "Antolaketa" # AI Translated msgid "Arranging " msgstr "Antolatzen " msgid "Arranging canceled." msgstr "Antolaketa bertan behera utzi da." msgid "Arranging complete, but some items were not able to be arranged. Reduce spacing and try again." msgstr "Antolaketa egin da, baina badira paketatu gabeko elementuak. Murriztu tartea eta saiatu berriro." msgid "Arranging done." msgstr "Antolaketa egina." msgid "Arrange failed. Found some exceptions when processing object geometries." msgstr "Antolatzeak huts egin du. Salbuespen batzuk aurkitu dira objektuen geometriak prozesatzean." #, c-format, boost-format msgid "" "Arrangement ignored the following objects which can't fit into a single bed:\n" "%s" msgstr "" "Antolaketak ez ditu kontuan hartu ohe bakar batean sartu ezin diren objektu hauek:\n" "%s" msgid "" "All the selected objects are on a locked plate.\n" "Cannot auto-orient these objects." msgstr "" "Hautatutako objektu guztiak blokeatutako plaka batean daude.\n" "Ezin dira objektu horiek automatikoki orientatu." msgid "" "This plate is locked.\n" "Cannot auto-orient on this plate." msgstr "" "Plaka hau blokeatuta dago.\n" "Ezin da automatikoki orientatu plaka honetan." msgid "Orienting..." msgstr "Orientatzen..." msgid "Orienting" msgstr "Orientatzioa" msgid "Orienting canceled." msgstr "Orientatzea bertan behera utzi da." msgid "Filling" msgstr "Betetzea" msgid "Bed filling canceled." msgstr "Ohearen betetzea bertan behera utzi da." msgid "Bed filling done." msgstr "Ohearen betetzea eginda." msgid "Searching for optimal orientation" msgstr "Orientazio optimoaren bila" msgid "Orientation search canceled." msgstr "Orientazioaren bilaketa bertan behera utzita." msgid "Orientation found." msgstr "Orientazioa aurkituta." msgid "Logging in" msgstr "Saioa hasten" msgid "Login failed" msgstr "Saio-hasierak huts egin du" msgid "Please check the printer network connection." msgstr "Egiaztatu inprimagailuaren sareko konexioa." msgid "Abnormal print file data: please slice again." msgstr "Inprimatze-fitxategiaren datu anormalak. Mesedez, xerratu berriro." msgid "Task canceled." msgstr "Zeregina bertan behera utzi da." msgid "Upload task timed out. Please check the network status and try again." msgstr "Kargatzeko zereginak denbora-muga gainditu du. Mesedez, egiaztatu sarearen egoera eta saiatu berriro." msgid "Cloud service connection failed. Please try again." msgstr "Cloud zerbitzuaren konexioak huts egin du. Mesedez, saiatu berriro." msgid "Print file not found; please slice again." msgstr "Ez da inprimatze-fitxategia aurkitu. Mesedez, xerratu berriro." msgid "The print file exceeds the maximum allowable size (1GB). Please simplify the model and slice again." msgstr "Inprimatze-fitxategiak baimendutako gehienezko tamaina (1 GB) gainditzen du. Mesedez, sinplifika ezazu modeloa eta xerratu berriro." msgid "Failed to send the print job. Please try again." msgstr "Huts egin du inprimatze-lana bidaltzean. Mesedez, saiatu berriro." msgid "Failed to upload file to ftp. Please try again." msgstr "Huts egin du fitxategia FTPra igotzean. Mesedez, saiatu berriro." msgid "Check the current status of the Bambu Lab server by clicking on the link above." msgstr "Egiaztatu Bambu zerbitzariaren uneko egoera goiko estekan klik eginez." msgid "The size of the print file is too large. Please adjust the file size and try again." msgstr "Inprimatze-fitxategiaren tamaina handiegia da. Mesedez, doitu fitxategiaren tamaina eta saiatu berriro." msgid "Print file not found; please slice it again and send it for printing." msgstr "Inprimatze-fitxategia ez da aurkitu; xerratu berriro eta bidali inprimatzera." msgid "Failed to upload print file via FTP. Please check the network status and try again." msgstr "Huts egin du inprimatze-fitxategia FTPra igotzean. Mesedez, egiaztatu sarearen egoera eta saiatu berriro." msgid "Sending print job over LAN" msgstr "Inprimatze-lana LANen bidez bidaltzen" msgid "Sending print job through cloud service" msgstr "Inprimatze-lana hodeiko zerbitzuaren bidez bidaltzen" msgid "Print task sending times out." msgstr "Inprimatze-bidalketak huts egin du." msgid "Service Unavailable" msgstr "Zerbitzua ez dago erabilgarri" msgid "Unknown Error." msgstr "Errore ezezaguna." msgid "Sending print configuration" msgstr "Inprimaketaren konfigurazioa bidaltzen" #, c-format, boost-format msgid "Successfully sent. Will automatically jump to the device page in %ss" msgstr "Ongi bidali da. Automatikoki salto egingo du gailuaren orrira %ss(e)n" #, c-format, boost-format msgid "Successfully sent. Will automatically jump to the next page in %ss" msgstr "Ongi bidali da. Automatikoki salto egingo du hurrengo orrira %ss(e)n" #, c-format, boost-format msgid "Access code:%s IP address:%s" msgstr "Sarbide-kodea: %s IP helbidea: %s" msgid "A Storage needs to be inserted before printing via LAN." msgstr "Biltegiratze-gailuren bat sartu behar da LAN bidez inprimatu aurretik." msgid "Sending print job over LAN, but the Storage in the printer is abnormal and print-issues may be caused by this." msgstr "Inprimatze-lana LAN bidez bidaltzen ari da, baina inprimagailuko biltegiratze-gailuak arazoak ditu, eta horrek inprimatze-arazoak sor ditzake." msgid "The Storage in the printer is abnormal. Please replace it with a normal Storage before sending print job to printer." msgstr "Inprimagailuko biltegiratze-gailuak arazoak ditu. Ordeztu behar bezala dabilen biltegiratze-gailu batekin inprimatze-lana inprimagailura bidali aurretik." msgid "The Storage in the printer is read-only. Please replace it with a normal Storage before sending print job to printer." msgstr "Inprimagailuko biltegiratze-gailua irakurtzeko soilik da. Ordeztu behar bezala dabilen biltegiratze-gailu batekin inprimatze-lana inprimagailura bidali aurretik." msgid "Encountered an unknown error with the Storage status. Please try again." msgstr "Errore ezezagun bat gertatu da biltegiratze-gailuaren egoerarekin. Saiatu berriro." msgid "Sending G-code file over LAN" msgstr "G-code fitxategia LAN bidez bidaltzen" msgid "Sending G-code file to SD card" msgstr "G-code fitxategia SD txartelera bidaltzen" #, c-format, boost-format msgid "Successfully sent. Close current page in %s s" msgstr "Ongi bidali da. Uneko orria %s s-tan itxiko da" msgid "Storage needs to be inserted before sending to printer." msgstr "Biltegiratze-gailu bat sartu behar da inprimagailura bidali aurretik." msgid "Sending G-code file over LAN, but the Storage in the printer is abnormal and print-issues may be caused by this." msgstr "G-code fitxategia LAN bidez bidaltzen ari da, baina inprimagailuko biltegiratze-gailuak arazoak ditu, eta horrek inprimatze-arazoak sor ditzake." msgid "The Storage in the printer is abnormal. Please replace it with a normal Storage before sending to printer." msgstr "Inprimagailuko biltegiratze-gailuak arazoak ditu. Ordeztu behar bezala dabilen biltegiratze-gailu batekin inprimagailura bidali aurretik." msgid "The Storage in the printer is read-only. Please replace it with a normal Storage before sending to printer." msgstr "Inprimagailuko biltegiratze-gailua irakurtzeko soilik da. Ordeztu behar bezala dabilen biltegiratze-gailu batekin inprimagailura bidali aurretik." msgid "Bad input data for EmbossCreateObjectJob." msgstr "Sarrera-datu baliogabeak EmbossCreateObjectJob-erako." msgid "Add Emboss text object" msgstr "Gehitu erliebedun testu-objektua" msgid "Bad input data for EmbossUpdateJob." msgstr "Sarrera-datu baliogabeak EmbossUpdateJob-erako." msgid "Created text volume is empty. Change text or font." msgstr "Sortutako testu-bolumena hutsik dago. Aldatu testua edo letra-tipoa." msgid "Bad input data for CreateSurfaceVolumeJob." msgstr "Sarrera-datu baliogabeak CreateSurfaceVolumeJob-erako." msgid "Bad input data for UseSurfaceJob." msgstr "Sarrera-datu baliogabeak UseSurfaceJob-erako." #. TRN: This is the title of the action appearing in undo/redo stack. #. It is same for Text and SVG. msgid "Emboss attribute change" msgstr "Erliebe-atributuaren aldaketa" msgid "Add Emboss text Volume" msgstr "Gehitu erliebe-testuko bolumena" msgid "Font doesn't have any shape for given text." msgstr "Letra-tipoak ez du formarik emandako testurako." msgid "There is no valid surface for text projection." msgstr "Ez dago testua proiektatzeko gainazal baliozkorik." msgid "An unexpected error occurred" msgstr "Espero gabeko errore bat gertatu da" msgid "Thermal Preconditioning for first layer optimization" msgstr "Lehen geruza optimizatzeko aurrebaldintzatze termikoa" msgid "Remaining time: Calculating..." msgstr "Geratzen den denbora: kalkulatzen..." msgid "The heated bed's thermal preconditioning helps optimize the first layer print quality. Printing will start once preconditioning is complete." msgstr "Ohe beroaren aurrebaldintzatze termikoak lehen geruzaren inprimatze-kalitatea optimizatzen laguntzen du. Aurrebaldintzatzea amaitutakoan hasiko da inprimaketa." #, c-format, boost-format msgid "Remaining time: %dmin%ds" msgstr "Geratzen den denbora: %d min %d s" msgid "Importing SLA archive" msgstr "SLA artxiboa inportatzen" msgid "The SLA archive doesn't contain any presets. Please activate some SLA printer presets first before importing that SLA archive." msgstr "SLAren artxiboak ez du inolako aurrezarpenik. Mesedez, aktibatu SLA inprimagailuaren aurrezarpenen bat SLA artxibo hori inportatu aurretik." msgid "Importing canceled." msgstr "Inportatzea bertan behera utzi da." msgid "Importing done." msgstr "Inportazioa eginda." msgid "The imported SLA archive did not contain any presets. The current SLA presets were used as fallback." msgstr "Inportatutako SLA artxiboak ez du inolako aurrezarpenik. Uneko SLA aurrezarpenak erabiliko dira alternatiba gisa." msgid "You cannot load an SLA project with a multi-part object on the bed" msgstr "Ezin duzu ohean pieza anitzeko objektu bat duen SLA proiekturik kargatu" msgid "Please check your object list before preset changing." msgstr "Mesedez, egiaztatu zure objektuen zerrenda aurrezarpenak aldatu aurretik." msgid "Attention!" msgstr "Adi!" msgid "Downloading" msgstr "Deskargatzen" msgid "Download failed" msgstr "Deskargak huts egin du" msgid "Canceled" msgstr "Bertan behera utzita" msgid "Installed successfully" msgstr "Behar bezala instalatu da" msgid "Installing" msgstr "Instalatzen" msgid "Install failed" msgstr "Instalazioak huts egin du" msgid "License Info" msgstr "Lizentziaren informazioa" msgid "Copyright" msgstr "Copyright" msgid "License" msgstr "Lizentzia" msgid "Orca Slicer is licensed under " msgstr "OrcaSlicer lizentzia hauen pean dago " msgid "GNU Affero General Public License, version 3" msgstr "GNU Affero General Public License, 3. bertsioa" msgid "Orca Slicer is based on PrusaSlicer and BambuStudio" msgstr "OrcaSlicer softwarea PrusaSlicer eta BambuStudio-n oinarritua dago" msgid "Libraries" msgstr "Liburutegiak" msgid "This software uses open source components whose copyright and other proprietary rights belong to their respective owners" msgstr "Software honek kode irekiko osagaiak erabiltzen ditu, eta horien egile-eskubideak eta beste jabetza-eskubide batzuk dagozkien jabeenak dira" #, c-format, boost-format msgid "About %s" msgstr "%s-i buruz" msgid "Open-source slicing stands on a tradition of collaboration and attribution. Slic3r, created by Alessandro Ranellucci and the RepRap community, laid the foundation. PrusaSlicer by Prusa Research built on that work, Bambu Studio forked from PrusaSlicer, and SuperSlicer extended it with community-driven enhancements. Each project carried the work of its predecessors forward, crediting those who came before." msgstr "Kode irekiko xerratzea lankidetzaren eta aitortzaren tradizioan oinarritzen da. Alessandro Ranelluccik eta RepRap komunitateak sortutako Slic3r-ek ezarri zituen oinarriak. Prusa Research-en PrusaSlicerrek lan horretan sakondu zuen, Bambu Studio PrusaSlicerretik adarkatu zen, eta SuperSlicerrek komunitateak bultzatutako hobekuntzekin zabaldu zuen. Proiektu bakoitzak aurrekoen lana aurrera eraman zuen, aurretik aritutakoei aitortza eginez." msgid "OrcaSlicer began in that same spirit, drawing from PrusaSlicer, BambuStudio, SuperSlicer, and CuraSlicer. But it has since grown far beyond its origins — introducing advanced calibration tools, precise wall and seam control and hundreds of other features." msgstr "OrcaSlicer espiritu berean sortu zen, PrusaSlicer, BambuStudio, SuperSlicer eta CuraSlicer oinarri hartuta. Ordutik, ordea, bere jatorria asko gainditu du: kalibrazio-tresna aurreratuak, hormen eta josturen kontrol zehatza eta beste ehunka eginbide gehitu ditu." msgid "Today, OrcaSlicer is the most widely used and actively developed open-source slicer in the 3D printing community. Many of its innovations have been adopted by other slicers, making it a driving force for the entire industry." msgstr "Gaur egun, OrcaSlicer 3D inprimaketaren komunitatean gehien erabiltzen eta aktiboen garatzen den kode irekiko xerratzailea da. Haren berrikuntza asko beste xerratzaile batzuek bereganatu dituzte, eta industria osoaren eragile nagusietako bat bihurtu da." msgid "AMS Materials Setting" msgstr "AMS Materialen Ezarpena" msgid "Close" msgstr "Itxi" msgid "" "Nozzle\n" "Temperature" msgstr "" "Pita\n" "Tenperatura" msgid "max" msgstr "max" msgid "min" msgstr "min" #, boost-format msgid "The input value should be greater than %1% and less than %2%" msgstr "Sarreraren balioak %1% baino handiagoa eta %2% baino txikiagoa izan behar du" msgid "Factors of Flow Dynamics Calibration" msgstr "Fluxu-Dinamiken Kalibrazioaren faktoreak" msgid "Wiki Guide" msgstr "Wiki Gida" msgid "PA Profile" msgstr "Presio Linealaren Aitzinapenaren profila" msgid "Factor K" msgstr "K faktorea" msgid "Factor N" msgstr "N faktorea" msgid "Setting AMS slot information while printing is not supported" msgstr "Inprimatzen ari den bitartean AMSko arteken informazioa ezartzea ez dago onartuta" msgid "Setting Virtual slot information while printing is not supported" msgstr "Inprimatzen ari den bitartean arteka Birtualaren informazioa ezartzea ez dago onartuta" msgid "Are you sure you want to clear the filament information?" msgstr "Ziur zaude filamentuaren informazioa garbitu nahi duzula?" msgid "You need to select the material type and color first." msgstr "Lehenik eta behin, material-mota eta kolorea hautatu behar dituzu." #, c-format, boost-format msgid "Please input a valid value (K in %.1f~%.1f)" msgstr "Mesedez, sartu baliozko balio bat (K in %.1f~%.1f)" #, c-format, boost-format msgid "Please input a valid value (K in %.1f~%.1f, N in %.1f~%.1f)" msgstr "Mesedez, sartu baliozko balio bat (K in %.1f~%.1f, N in %.1f~%.1f)" msgid "" "The nozzle flow is not set. Please set the nozzle flow rate before editing the filament.\n" "'Device -> Print parts'" msgstr "" "Pitaren fluxua ez dago ezarrita. Ezarri pitaren fluxu-tasa filamentuari editatu aurretik.\n" "“Gailua -> Inprimatu piezak”" msgid "AMS" msgstr "AMS" msgid "Other Color" msgstr "Beste kolore bat" msgid "Custom Color" msgstr "Kolore pertsonalizatua" msgid "Dynamic flow calibration" msgstr "Fluxuaren kalibrazio dinamikoa" msgid "The nozzle temp and max volumetric speed will affect the calibration results. Please fill in the same values as the actual printing. They can be auto-filled by selecting a filament preset." msgstr "Pitaren tenperaturak eta abiadura bolumetriko maximoak eragina izango dute kalibrazioaren emaitzetan. Mesedez, bete benetako inprimaketaren balio berak. Automatikoki bete daitezke, filamentuaren aurrezarpen bat hautatuta." msgid "Nozzle Diameter" msgstr "Pitaren diametroa" msgid "Plate Type" msgstr "Plaka mota" msgid "Nozzle temperature" msgstr "Pitaren tenperatura" msgid "Bed Temperature" msgstr "Ohearen tenperatura" msgid "Max volumetric speed" msgstr "Abiadura bolumetriko maximoa" msgid "℃" msgstr "℃" msgid "Bed temperature" msgstr "Ohearen tenperatura" msgid "mm³" msgstr "mm³" msgid "Start" msgstr "Hasi" msgid "Next" msgstr "Hurrengoa" msgid "Calibration completed. Please find the most uniform extrusion line on your hot bed like the picture below, and fill the value on its left side into the factor K input box." msgstr "Kalibrazioa amaitu da. Mesedez, begiratu zein den zure ohe beroko estrusio-lerrorik uniformeena, beheko irudian agertzen den antzera, eta bete bere ezkerreko balioa K faktorearen sarrerako koadroan." msgid "Save" msgstr "Gorde" msgctxt "Navigation" msgid "Back" msgstr "Atzera" msgid "Example" msgstr "Adibidea" #, c-format, boost-format msgid "Calibrating... %d%%" msgstr "Kalibratzen... %d%%" msgid "Calibration completed" msgstr "Kalibrazioa egina" #, c-format, boost-format msgid "%s does not support %s" msgstr "%s -k ez du onartzen %s" msgid "Step" msgstr "Urratsa" msgid "Unmapped" msgstr "Esleitu gabe" msgid "" "Upper half area: Original\n" "Lower half area: The filament from original project will be used when unmapped.\n" "And you can click it to modify" msgstr "" "Goiko erdia: jatorrizkoa\n" "Beheko erdia: esleitu gabe dagoenean, jatorrizko proiektuko filamentua erabiliko da.\n" "Klik egin dezakezu aldatzeko" msgid "" "Upper half area: Original\n" "Lower half area: Filament in AMS\n" "And you can click it to modify" msgstr "" "Goiko erdia: jatorrizkoa\n" "Beheko erdia: AMSko filamentua\n" "Klik egin dezakezu aldatzeko" msgid "" "Upper half area: Original\n" "Lower half area: Filament in AMS\n" "And you cannot click it to modify" msgstr "" "Goiko erdia: jatorrizkoa\n" "Beheko erdia: AMSko filamentua\n" "Ezin duzu klik egin aldatzeko" msgid "AMS Slots" msgstr "AMSko artekak" msgid "Please select from the following filaments" msgstr "Hautatu filamentua aukera hauetatik" # AI Translated #, c-format, boost-format msgid "Select filament that installed to the %s" msgstr "Hautatu %s(e)an instalatutako filamentua" msgid "Left AMS" msgstr "Ezkerreko AMSa" msgid "External" msgstr "Kanpokoa" msgid "Reset current filament mapping" msgstr "Berrezarri uneko filamentuen esleipena" msgid "Right AMS" msgstr "Eskuineko AMSa" #, c-format, boost-format msgid "Printing with the current nozzle may produce an extra %0.2f g of waste." msgstr "Uneko pitarekin inprimatzeak %0.2f g hondakin gehiago sor ditzake." # AI Translated #, c-format, boost-format msgid "Tips: the filament type(%s) does not match with the filament type(%s) in the slicing file. If you want to use this slot, you can install %s instead of %s and change slot information on the 'Device' page." msgstr "Aholkua: filamentu mota(%s) ez dator bat xerratze-fitxategiko filamentu motarekin(%s). Arteka hau erabili nahi baduzu, %s instala dezakezu %s-(r)en ordez eta artekaren informazioa alda dezakezu 'Gailua' orrian." # AI Translated #, c-format, boost-format msgid "Cannot select: the filament type(%s) does not match with the filament type(%s) in the slicing file. If you want to use this slot, you can install %s instead of %s and change slot information on the 'Device' page." msgstr "Ezin da hautatu: filamentu mota(%s) ez dator bat xerratze-fitxategiko filamentu motarekin(%s). Arteka hau erabili nahi baduzu, %s instala dezakezu %s-(r)en ordez eta artekaren informazioa alda dezakezu 'Gailua' orrian." # AI Translated #, c-format, boost-format msgid "Cannot select: the slot is empty or undefined. If you want to use this slot, you can install %s and change slot information on the 'Device' page." msgstr "Ezin da hautatu: arteka hutsik dago edo ez dago definituta. Arteka hau erabili nahi baduzu, %s instala dezakezu eta artekaren informazioa alda dezakezu 'Gailua' orrian." # AI Translated msgid "Cannot select: No filament loaded in current slot." msgstr "Ezin da hautatu: ez dago filamenturik kargatuta uneko artekan." msgid "Enable AMS" msgstr "AMSa gaitu" msgid "Print with filament in the AMS" msgstr "AMSko filamentuekin inprimatu" msgid "Disable AMS" msgstr "AMSa desaktibatu" msgid "Print with filament on external spool" msgstr "Inprimatu kanpoko harileko filamentua erabiliz" msgid "Please change the desiccant when it is too wet. The indicator may not represent accurately in following cases: when the lid is open or the desiccant pack is changed. It takes a few hours to absorb the moisture, and low temperatures also slow down the process." msgstr "Aldatu lehorgarria gehiegi bustita dagoenean. Baliteke adierazleak ez ematea neurketa zehatza estalkia irekita dagoenean edo lehorgarri-paketea aldatu denean. Hezetasuna xurgatzeko ordu batzuk behar dira, eta tenperatura baxuek prozesua moteltzen dute." msgid "Configure which AMS slot should be used for a filament used in the print job." msgstr "Konfiguratu zer AMSko zirrikitu erabili behar den inprimatze-lanean erabiltzen den filamentu baterako." msgid "Filament used in this print job" msgstr "Inprimatze lan honetan erabilitako filamentua" msgid "AMS slot used for this filament" msgstr "Filamentu honetarako erabiltzen den AMSko arteka" msgid "Click to select AMS slot manually" msgstr "Egin klik AMSko arteka eskuz hautatzeko" msgid "Do not Enable AMS" msgstr "Ez gaitu AMS-a" msgid "Print using filament on external spool." msgstr "Inprimatu kanpoko harileko filamentua erabiliz." msgid "Print with filament in AMS" msgstr "AMSko filamentuarekin inprimatu" # AI Translated msgctxt "Nozzle position" msgid "Left" msgstr "Ezkerra" # AI Translated msgctxt "Nozzle position" msgid "Right" msgstr "Eskuina" msgid "When the current material run out, the printer will continue to print in the following order." msgstr "Uneko materiala agortzen denean, inprimagailuak hurrengo ordenean inprimatzen jarraituko du." msgid "Identical filament: same brand, type and color." msgstr "Filamentu berdina: marka, mota eta kolore bera." msgid "Group" msgstr "Multzokatu" msgid "When the current material runs out, the printer would use identical filament to continue printing." msgstr "Uneko materiala agortzen denean, inprimagailuak filamentua berdina erabiliko du inprimatzen jarraitzeko." msgid "The printer does not currently support auto refill." msgstr "Inprimagailuak ez du une honetan kargatze-automatikoa onartzen." msgid "AMS filament backup is not enabled; please enable it in the AMS settings." msgstr "AMSaren filamentuen babeskopia ez dago gaituta; gaitu AMSaren ezarpenetan." msgid "" "When the current filament runs out, the printer will use identical filament to continue printing.\n" "*Identical filament: same brand, type and color." msgstr "" "Uneko filamentua agortzen denean, inprimagailuak filamentua berdina erabiliko du inprimatzen jarraitzeko.\n" "*Filamentu berdina: marka, mota eta kolore berekoa." msgid "DRY" msgstr "LEHOR" msgid "WET" msgstr "HEZE" msgid "AMS Settings" msgstr "AMSaren ezarpenak" msgid "Insertion update" msgstr "Txertaketaren eguneratzea" msgid "The AMS will automatically read the filament information when inserting a new Bambu Lab filament spool. This takes about 20 seconds." msgstr "AMSak automatikoki irakurriko du filamentuko informazioa Bambu Lab filamentuzko bobina berri bat sartzean. Prozesuak 20 segundo inguru behar ditu." msgid "Note: if a new filament is inserted during printing, the AMS will not automatically read any information until printing is completed." msgstr "Oharra: inprimatzean filamentu berri bat sartzen bada, AMSak ez du automatikoki informaziorik irakurriko inprimaketa burutu arte." msgid "When inserting a new filament, the AMS will not automatically read its information, leaving it blank for you to enter manually." msgstr "Filamentu berri bat sartzean, AMSak ez du automatikoki bere informazioa irakurriko, zuri utziz eskuz sar dezazun." msgid "Update on startup" msgstr "Eguneratu abiaraztean" msgid "The AMS will automatically read the information of inserted filament on start-up. It will take about 1 minute. The reading process will rotate the filament spools." msgstr "AMSak automatikoki irakurriko du sartutako filamentuen informazioa abiaraztean. Minutu bat inguru beharko du. Irakurketa-prozesuan filamentuzko bobinak biratuko dira." msgid "The AMS will not automatically read information from inserted filament during startup and will continue to use the information recorded before the last shutdown." msgstr "AMSak ez du abiarazteak iraun bitartean txertatutako filamentuari buruzko informaziorik automatikoki irakurriko eta azken itzalaldiaren aurretik grabatutako informazioa erabiltzen jarraituko du." msgid "Update remaining capacity" msgstr "Eguneratu geratzen den edukiera" msgid "AMS will attempt to estimate the remaining capacity of the Bambu Lab filaments." msgstr "AMS Bambu Lab filamentuen geratzen den edukiera zenbatesten saiatuko da." msgid "AMS filament backup" msgstr "AMSko filamentuaren ordezkapen automatikoa" msgid "AMS will continue to another spool with matching filament properties automatically when current filament runs out." msgstr "Uneko filamentua agortzen denean horren propietateekin bat datorren beste multzo batera jarraituko du automatikoki AMS-ak." msgid "Air Printing Detection" msgstr "\"Inprimaketa airean\" detektatzea" msgid "Detects clogging and filament grinding, halting printing immediately to conserve time and filament." msgstr "Buxadura eta filamentuaren apurketak detektatzen ditu, inprimaketa berehala geldituz, denbora eta filamentua aurrezteko." msgid "AMS Type" msgstr "AMS mota" msgid "Switching" msgstr "Aldatzen" msgid "The printer is busy and cannot switch AMS type." msgstr "Inprimagailua lanpetuta dago eta ezin da AMS mota aldatu." msgid "Please unload all filament before switching." msgstr "Deskargatu filamentu guztia aldatu aurretik." msgid "AMS type switching needs firmware update, taking about 30s. Switch now?" msgstr "AMS mota aldatzeko firmwarea eguneratu behar da; 30 segundo inguru beharko ditu. Orain aldatu?" msgid "Arrange AMS Order" msgstr "Antolatu AMSen ordena" msgid "AMS ID will be reset. If you want a specific ID sequence, disconnect all AMS before resetting and connect them in the desired order after resetting." msgstr "AMSaren IDa berrezarriko da. ID-sekuentzia jakin bat nahi baduzu, deskonektatu AMS guztiak berrezarri aurretik, eta konektatu nahi duzun ordenan berrezarri ondoren." msgid "File" msgstr "Fitxategia" msgid "Calibration" msgstr "Kalibrazioa" msgid "Failed to download the plug-in. Please check your firewall settings and VPN software and retry." msgstr "Ezin izan da plugina deskargatu. Egiaztatu suebakiaren ezarpenak eta VPN softwarea, eta saiatu berriro." msgid "Failed to install the plug-in. The plug-in file may be in use. Please restart OrcaSlicer and try again. Also check whether it is blocked or has been deleted by anti-virus software." msgstr "Ezin izan da plugina instalatu. Baliteke pluginaren fitxategia erabiltzen egotea. Berrabiarazi OrcaSlicer eta saiatu berriro. Egiaztatu, halaber, antibirus-softwareak blokeatu edo ezabatu duen." msgid "Click here to see more info" msgstr "Egin klik hemen informazio gehiago ikusteko" msgid "The network plug-in was installed but could not be loaded. Please restart the application." msgstr "Sareko plugina instalatu da, baina ezin izan da kargatu. Berrabiarazi aplikazioa." msgid "Restart Required" msgstr "Berrabiarazi behar da" msgid "Please home all axes (click " msgstr "Mesedez, itzuli ardatz guztiak jatorrira (klik egin " msgid ") to locate the toolhead's position. This prevents device moving beyond the printable boundary and causing equipment wear." msgstr ") inprimatze-buruaren posizioa kokatzeko. Horrela, gailua inprimatu daitekeen mugatik haratago mugitzea eta ekipoaren higadura saihesten ditu." msgid "Go Home" msgstr "Hasierara joan" msgid "An error occurred. The system may have run out of memory, or a bug may have occurred." msgstr "Errore bat gertatu da. Baliteke sistemak memoria agortu izana edo akats bat gertatu izana." #, boost-format msgid "A fatal error occurred: \"%1%\"" msgstr "Errore oso larria gertatu da: \"%1%\"" msgid "Please save your project and restart the application." msgstr "Mesedez, gorde proiektua eta berrabiarazi programa." msgid "Processing G-Code from previous file…" msgstr "G-codea prozesatzen aurreko fitxategitik…" msgid "Slicing complete" msgstr "Xerraketa burutua" msgid "Access violation" msgstr "Sarbidea urratu da" msgid "Illegal instruction" msgstr "Legez kanpoko instrukzioa" msgid "Divide by zero" msgstr "Zerorekin zatituta" msgid "Overflow" msgstr "Buferrak gainezka egin du" msgid "Underflow" msgstr "Buferraren azpi-gainezkatzea" msgid "Floating reserved operand" msgstr "Erreserbatutako flotatzailea eragiten" msgid "Stack overflow" msgstr "Pilak gainezka egitea" msgid "Running post-processing scripts" msgstr "Post-prozesatuko script-ak exekutatzen" msgid "Successfully executed post-processing script" msgstr "Post-prozesatuko script-a ongi exekutatu da" msgid "Unknown error occurred during exporting G-code." msgstr "Errore ezezaguna gertatu da G-code-a esportatzean." #, boost-format msgid "" "Copying of the temporary G-code to the output G-code failed. Maybe the SD card is write locked?\n" "Error message: %1%" msgstr "" "Aldi baterako G-code-a irteerako G-code-an kopiatzeak huts egin du. Agian SD txartela idazteko blokeatuta dago?\n" "Errore- mezua: %1%" #, boost-format msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp." msgstr "Aldi baterako G-code-a irteerako G-code-an kopiatzeak huts egin du. Arazoak egon daitezke helburuko gailuarekin, saiatu berriro esportatzen edo beste gailu bat erabiltzen. Hondatutako irteerako G-code-a hemen da: %1%.tmp." #, boost-format msgid "Renaming of the G-code after copying to the selected destination folder has failed. Current path is %1%.tmp. Please try exporting again." msgstr "Hautatutako helburuko karpetara kopiatu ondoren G-code-aren izena aldatzeak huts egin du. Uneko helbidea %1%.tmp da. Mesedez, saiatu berriro esportatzen." #, boost-format msgid "Copying of the temporary G-code has finished but the original code at %1% couldn't be opened during copy check. The output G-code is at %2%.tmp." msgstr "Aldi baterako G-codearen kopia amaitu da, baina %1% -(e)n dagoen jatorrizko kodea ezin izan da ireki kopiaren egiaztapenean. Irteerako G-codea %2%.tmp -(e)n dago." #, boost-format msgid "Copying of the temporary G-code has finished but the exported code couldn't be opened during copy check. The output G-code is at %1%.tmp." msgstr "Aldi baterako G-codearen kopia amaitu da, baina esportatutako kodea ezin izan da ireki kopiaren egiaztapenean. Irteerako G-codea %1%.tmp -(e)n dago." #, boost-format msgid "G-code file exported to %1%" msgstr "G-code fitxategia hona esportatu da: %1%" msgid "Unknown error with G-code export" msgstr "Errore ezezaguna G-codea esportatzean" #, boost-format msgid "" "Failed to save G-code file.\n" "Error message: %1%.\n" "Source file %2%." msgstr "" "Huts egin du G-codearen fitxategia gordetzean.\n" "Errore-mezua: %1%.\n" "Iturburu-fitxategia: %2%." msgid "Copying of the temporary G-code to the output G-code failed." msgstr "Aldi baterako G-codea irteerako G-codean kopiatzeak huts egin du." #, boost-format msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue" msgstr "`%1%`(e)ra igotzea programatzen. Ikusi hemen: Leihoa -> Host-aren inprimatze-ilara" msgid "Origin" msgstr "Jatorria" msgid "Size in X and Y of the rectangular plate." msgstr "Plaka laukizuzenaren tamaina (X eta Y ardatzetan)." msgid "Distance of the 0,0 G-code coordinate from the front left corner of the rectangle." msgstr "G-Code-aren 0,0 koordenatuaren distantzia laukizuzenaren aurreko ezkerreko izkinatik." msgid "Diameter of the print bed. It is assumed that origin (0,0) is located in the center." msgstr "Inprimatze-ohearen diametroa. Jatorria (0,0) ohearen zentroan dagoela suposatzen da." msgid "Rectangular" msgstr "Laukizuzena" msgid "Circular" msgstr "Zirkularra" msgid "Load shape from STL..." msgstr "Kargatu forma STLtik..." msgid "Settings" msgstr "Ezarpenak" msgid "Remove" msgstr "Ezabatu altuera-tartea" msgid "Not found:" msgstr "Ez da aurkitu:" msgid "Model" msgstr "Modeloa" msgid "Choose an STL file to import bed shape from:" msgstr "Aukeratu STL fitxategi bat ohearen forma bertatik inportatzeko:" msgid "Invalid file format." msgstr "Fitxategiaren formatua ez da baliozkoa." msgid "Error: invalid model" msgstr "Errorea: modeloa ez da baliozkoa" msgid "The selected file contains no geometry." msgstr "Hautatutako fitxategiak ez du geometriarik." msgid "The selected file contains several disjointed areas. This is not supported." msgstr "Hautatutako fitxategiak hainbat eremu disjuntu ditu. Hori ez da onartzen." msgid "Choose a file to import bed texture from (PNG/SVG):" msgstr "Aukeratu fitxategi bat ohearen testura bertatik inportatzeko (PNG/SVG):" msgid "Choose an STL file to import bed model from:" msgstr "Aukeratu STL fitxategi bat ohearen modeloa bertatik inportatzeko:" msgid "Bed Shape" msgstr "Ohearen forma" #, c-format, boost-format msgid "A minimum temperature above %d℃ is recommended for %s.\n" msgstr "%d℃-tik gorako gehieneko tenperatura gomendatzen da honetarako: %s.\n" #, c-format, boost-format msgid "A maximum temperature below %d℃ is recommended for %s.\n" msgstr "%d℃-tik beherako gehieneko tenperatura gomendatzen da honetarako: %s.\n" msgid "The recommended minimum temperature cannot be higher than the recommended maximum temperature.\n" msgstr "Gomendatutako gutxieneko tenperatura ezin da gomendatutako gehieneko tenperatura baino handiagoa izan.\n" msgid "Please check.\n" msgstr "Mesedez, egiaztatu.\n" msgid "" "The nozzle may become clogged when the temperature is out of the recommended range.\n" "Please make sure whether to use this temperature to print.\n" "\n" msgstr "" "Pita buxatu egin daiteke tenperatura gomendatutako tartetik kanpo dagoenean.\n" "Mesedez, ziurtatu inprimatzeko tenperatura hau erabili behar den ala ez.\n" #, c-format, boost-format msgid "The recommended nozzle temperature for this filament type is [%d, %d] degrees Celsius." msgstr "Filamentu mota honetarako gomendatutako pitaren tenperatura [%d, %d] gradu zentigradukoa da." msgid "Adaptive Pressure Advance model validation failed:\n" msgstr "Presio-aurrerapen egokigarriraren modeloaren baliozkotzeak huts egin du:\n" msgid "" "Too small max volumetric speed.\n" "Value was reset to 0.5" msgstr "" "Abiadura bolumetriko maximo txikiegia.\n" "Balioa 0,5era berrezarri da" #, c-format, boost-format msgid "Current chamber temperature is higher than the material's safe temperature; this may result in material softening and nozzle clogs. The maximum safe temperature for the material is %d" msgstr "Uneko ganberako tenperatura materialaren tenperatura segurua baino handiagoa da, horrek materiala biguntzea ekar dezake eta buxaketak eragin ditzake. Materialaren gehienezko tenperatura segurua %d da" #, c-format, boost-format msgid "The minimal chamber temperature (%d℃) is higher than the target chamber temperature (%d℃). The minimal value is the threshold at which printing starts while the chamber keeps heating toward the target, so it should not exceed it. It will be clamped to the target." msgstr "Ganberako gutxieneko tenperatura (%d ℃) helburuko ganbera-tenperatura (%d ℃) baino altuagoa da. Gutxieneko balioa inprimaketa hasten den atalasea da, ganberak helbururantz berotzen jarraitzen duen bitartean; beraz, ez luke helburua gainditu behar. Helburuko baliora mugatuko da." msgid "" "Layer height too small\n" "It has been reset to 0.2" msgstr "" "Geruza-altuera txikiegia da.\n" "0,2ra berrezarri da" msgid "" "Ironing spacing too small\n" "It has been reset to 0.1" msgstr "" "Lisatzearen tartea txikiegia da\n" "0,1era berrezarri da" msgid "" "Zero initial layer height is invalid.\n" "\n" "The first layer height will be reset to 0.2." msgstr "" "Hasierako geruz-altuera 0 izatea ez da baliozkoa.\n" "\n" "Lehenengo geruza-altuera 0,2ra berrezarriko da." msgid "" "This setting is only used for tuning model size by small amounts.\n" "For example, when the model size has small errors or when tolerances are incorrect. For large adjustments, please use the model scale function.\n" "\n" "The value will be reset to 0." msgstr "" "Ezarpen hau modeloaren tamaina neurri txikian doitzeko bakarrik erabiltzen da.\n" "Adibidez, modeloaren tamainak errore txikiak dituenean edo tolerantziak okerrak direnean. Doikuntza handietarako, erabili modeloaren eskala-funtzioa.\n" "\n" "Balioa 0ra berrezarriko da." msgid "" "The elephant foot compensation value is too large.\n" "If there are significant elephant foot issues, please check other settings.\n" "The bed temperature may be too high, for example.\n" "\n" "The value will be reset to 0." msgstr "" "Elefante-oinaren konpentsazio-balioa handiegia da.\n" "Elefante-oinaren arazo nabarmenak badaude, egiaztatu beste ezarpenak.\n" "Adibidez, baliteke ohearen tenperatura handiegia izatea.\n" "\n" "Balioa 0ra berrezarriko da." msgid "Alternate extra wall does't work well when ensure vertical shell thickness is set to All." msgstr "Horma gehigarri txandakatuak ez du ondo funtzionatzen \"Bermatu oskolaren lodiera bertikala\" Guztiak gisa ezarrita dagoenean." msgid "" "Change these settings automatically?\n" "Yes - Change ensure vertical shell thickness to Moderate and enable alternate extra wall\n" "No - Don't use alternate extra wall" msgstr "" "Ezarpen hauek automatikoki aldatu?\n" "Bai - Aldatu \"Bermatu oskolaren lodiera bertikala\" Moderatua-ra eta aktibatu \"Horma gehigarri txandakatua\n" "Ez - Ez erabili \"Horma gehigarri txandakatua" msgid "" "Prime tower does not work when Adaptive Layer Height or Independent Support Layer Height is on.\n" "Which do you want to keep?\n" "YES - Keep Prime Tower\n" "NO - Keep Adaptive Layer Height and Independent Support Layer Height" msgstr "" "Purgatze-dorreak ez du funtzionatzen 'Geruza-altuera Egokigarria' edo 'Euskarrien Geruza-altuera Independentea' aktibatuta dagoenean.\n" "Zein mantendu nahi duzu?\n" "BAI - Mantendu purgatze-dorrea\n" "EZ - Mantendu 'Geruza-altuera Egokigarria' eta 'Euskarrien Geruza-Altuera Independentea'" msgid "" "Prime tower does not work when Adaptive Layer Height is on.\n" "Which do you want to keep?\n" "YES - Keep Prime Tower\n" "NO - Keep Adaptive Layer Height" msgstr "" "Purgatze-dorreak ez du funtzionatzen 'Geruza-altuera Egokigarria' aktibatuta dagoenean.\n" "Zer gorde nahi duzu?\n" "BAI - Mantendu purgatze-dorrea\n" "EZ - Mantendu 'Geruza-altuera Egokigarria'" msgid "" "Prime tower does not work when Independent Support Layer Height is on.\n" "Which do you want to keep?\n" "YES - Keep Prime Tower\n" "NO - Keep Independent Support Layer Height" msgstr "" "Purgatze-dorreak ez du funtzionatzen 'Euskarrien Geruza-altuera Independentea' aktibatuta dagoenean.\n" "Zer mantendu nahi duzu?\n" "BAI - Purgatze-dorrea mantendu\n" "NO - 'Euskarrien Geruza-Altuera Independentea' mantendu" msgid "" "seam_slope_start_height need to be smaller than layer_height.\n" "Reset to 0." msgstr "" "seam_slope_start_height txigiagoa izan behar da layer_height baino.\n" "Berrezarri 0ra." #, no-c-format, no-boost-format msgid "" "Lock depth should smaller than skin depth.\n" "Reset to 50% of skin depth." msgstr "" "Blokeo-sakonera gainazalaren sakonera baino txikiagoa izan behar da.\n" "Gainazalaren sakoneraren %50era berrezarri da." msgid "Both [Extrusion] and [Combined] modes of Fuzzy Skin require the Arachne Wall Generator to be enabled." msgstr "Gainazal zimurraren [Estrusioa] eta [Konbinatua] moduek Arachne horma-sorgailua gaituta egotea behar dute." msgid "" "Change these settings automatically?\n" "Yes - Enable Arachne Wall Generator\n" "No - Disable Arachne Wall Generator and set [Displacement] mode of the Fuzzy Skin" msgstr "" "Ezarpen hauek automatikoki aldatu?\n" "Bai - Gaitu Arachne horma-sorgailua\n" "Ez - Desgaitu Arachne horma-sorgailua eta ezarri gainazal zimurraren [Desplazamendua] modua" msgid "Spiral mode only works when wall loops is 1, support is disabled, clumping detection by probing is disabled, top shell layers is 0, sparse infill density is 0 and timelapse type is traditional." msgstr "Espiral moduak baldintza hauetan bakarrik funtzionatzen du: horma-begiztak 1 izatea, euskarriak desgaituta egotea, haztatze bidezko material-metaketa detektatzea desgaituta egotea, goiko estalki-geruzak 0 izatea, dentsitate baxuko betegarriaren dentsitatea 0 izatea eta timelapse mota tradizionala izatea." msgid " But machines with I3 structure will not generate timelapse videos." msgstr " Baina I3 egitura duten makinek ez dute timelapse bideorik sortuko." msgid "" "Change these settings automatically?\n" "Yes - Change these settings and enable spiral/vase mode automatically\n" "No - Cancel enabling spiral mode" msgstr "" "Ezarpen hauek automatikoki aldatu?\n" "Bai - Aldatu ezarpen hauek eta gaitu espiral/loreontzi modua automatikoki\n" "Ez - Utzi bertan behera espiral modua gaitzea" msgid "Printing" msgstr "Inprimatzen" msgid "Auto bed leveling" msgstr "Ohearen nibelatze automatikoa" msgid "Heatbed preheating" msgstr "Ohe beroaren aurreberoketa" msgid "Vibration compensation" msgstr "Bibrazioen konpentsazioa" msgid "Changing filament" msgstr "Filamentua aldatzen" msgid "M400 pause" msgstr "M400 pausa" msgid "Paused (filament ran out)" msgstr "Pausatuta (filamentua agortu da)" msgid "Heating nozzle" msgstr "Pita berotzen" msgid "Calibrating dynamic flow" msgstr "Fluxu dinamikoa kalibratzen" msgid "Scanning bed surface" msgstr "Ohearen gainazala eskaneatzen" msgid "Inspecting first layer" msgstr "Lehen geruza ikuskatzen" msgid "Identifying build plate type" msgstr "Inprimatzeko plaka mota identifikatzen" msgid "Calibrating Micro Lidar" msgstr "Micro Lidar kalibratzen" msgid "Homing toolhead" msgstr "Inprimatze-burua jatorrira eramaten" msgid "Cleaning nozzle tip" msgstr "Pitaren punta garbitzen" msgid "Checking extruder temperature" msgstr "Estrusorearen tenperatura egiaztatzen" msgid "Paused by the user" msgstr "Erabiltzaileak eten du inprimaketa" msgid "Pause (front cover fall off)" msgstr "Aurrealdeko estalkia erori delako pausatuta" msgid "Calibrating the micro lidar" msgstr "Micro Lidar-a kalibratzen" msgid "Calibrating flow ratio" msgstr "Fluxu-erlazioa kalibratzen" msgid "Pause (nozzle temperature malfunction)" msgstr "Pausa (pitaren tenperaturaren akatsa)" msgid "Pause (heatbed temperature malfunction)" msgstr "Pausa (ohe beroaren tenperaturaren akatsa)" msgid "Filament unloading" msgstr "Filamentua deskargatzen" msgid "Pause (step loss)" msgstr "Pausatu (urrats-galera)" msgid "Filament loading" msgstr "Filamentua kargatzen" msgid "Motor noise cancellation" msgstr "Motorraren zarata ezabatzea" msgid "Pause (AMS offline)" msgstr "Pausatu (AMS lineaz kanpo)" msgid "Pause (low speed of the heatbreak fan)" msgstr "Pausa (eten termikoko haizagailuaren abiadura baxua)" msgid "Pause (chamber temperature control problem)" msgstr "Pausa (ganberako tenperatura kontrolatzeko arazoa)" msgid "Cooling chamber" msgstr "Ganbera hozten" msgid "Pause (G-code inserted by user)" msgstr "Pausa (erabiltzaileak txertatutako G-codea)" msgid "Motor noise showoff" msgstr "Motorraren zarata nabarmena" msgid "Pause (nozzle clumping)" msgstr "Pausatu (pitan material-metaketa)" msgid "Pause (cutter error)" msgstr "Pausatu (ebakigailuaren errorea)" msgid "Pause (first layer error)" msgstr "Pausa (lehen geruzako errorea)" msgid "Pause (nozzle clog)" msgstr "Pausatu (pita buxatuta)" msgid "Measuring motion precision" msgstr "Mugimenduaren zehaztasuna neurtzen" msgid "Enhancing motion precision" msgstr "Mugimenduaren zehaztasuna hobetzen" msgid "Measure motion accuracy" msgstr "Neurtu mugimenduaren zehaztasuna" msgid "Nozzle offset calibration" msgstr "Pitaren desplazamenduaren kalibrazioa" msgid "High temperature auto bed leveling" msgstr "Tenperatura altuko ohe-nibelatze automatikoa" msgid "Auto Check: Quick Release Lever" msgstr "Egiaztapen automatikoa: askatze azkarreko palanka" msgid "Auto Check: Door and Upper Cover" msgstr "Egiaztapen automatikoa: atea eta goiko estalkia" msgid "Laser Calibration" msgstr "Laserraren kalibrazioa" msgid "Auto Check: Platform" msgstr "Egiaztapen automatikoa: plataforma" msgid "Confirming BirdsEye Camera location" msgstr "BirdsEye kameraren kokapena baieztatzen" msgid "Calibrating BirdsEye Camera" msgstr "BirdsEye kamera kalibratzen" msgid "Auto bed leveling -phase 1" msgstr "Ohearen nibelatze automatikoa - 1. fasea" msgid "Auto bed leveling -phase 2" msgstr "Ohearen nibelatze automatikoa - 2. fasea" msgid "Heating chamber" msgstr "Ganbera berotzen" msgid "Cooling heatbed" msgstr "Ohe beroa hozten" msgid "Printing calibration lines" msgstr "Kalibrazio-lerroak inprimatzen" msgid "Auto Check: Material" msgstr "Egiaztapen automatikoa: materiala" msgid "Live View Camera Calibration" msgstr "Zuzeneko ikuspegiko kameraren kalibrazioa" msgid "Waiting for heatbed to reach target temperature" msgstr "Ohe beroa helburuko tenperaturara iritsi zain" msgid "Auto Check: Material Position" msgstr "Egiaztapen automatikoa: materialaren kokapena" msgid "Cutting Module Offset Calibration" msgstr "Ebaketa-moduluaren desplazamenduaren kalibrazioa" msgid "Measuring Surface" msgstr "Gainazala neurtzen" msgid "Calibrating the detection position of nozzle clumping" msgstr "Pitako material-metaketa detektatzeko kokapena kalibratzen" msgid "Update successful." msgstr "Eguneraketa ongi egin da." msgid "Downloading failed." msgstr "Deskargak huts egin du." msgid "Verification failed." msgstr "Egiaztapenak huts egin du." msgid "Update failed." msgstr "Eguneraketak huts egin du." msgid "Timelapse is not supported on this printer." msgstr "Inprimagailu honek ez du timelapserik onartzen." msgid "Timelapse is not supported while the storage does not exist." msgstr "Timelapsea ez dago onartuta biltegiratze-gailurik sartuta ez dagoen bitartean." msgid "Timelapse is not supported while the storage is unavailable." msgstr "Timelapsea ez dago onartuta biltegiratzea erabilgarri ez dagoen bitartean." msgid "Timelapse is not supported while the storage is readonly." msgstr "Timelapsea ez dago onartuta biltegiratze-gailua irakurtzeko soilik den bitartean." msgid "To ensure your safety, certain processing tasks (such as laser) can only be resumed on printer." msgstr "Zure segurtasuna bermatzeko, prozesatze-lan batzuk (laser bidezkoak, adibidez) inprimagailuan soilik berrekin daitezke." #, c-format, boost-format msgid "The chamber temperature is too high, which may cause the filament to soften. Please wait until the chamber temperature drops below %d℃. You may open the front door or enable fans to cool down." msgstr "Ganberako tenperatura altuegia da, eta filamentua bigundu daiteke. Itxaron ganberako tenperatura %d ℃-tik behera jaitsi arte. Aurreko atea ireki edo haizagailuak gaitu ditzakezu hozteko." #, c-format, boost-format msgid "AMS temperature is too high, which may cause the filament to soften. Please wait until the AMS temperature drops below %d℃." msgstr "AMSaren tenperatura altuegia da, eta filamentua bigundu daiteke. Itxaron AMSaren tenperatura %d ℃-tik behera jaitsi arte." msgid "The current chamber temperature or the target chamber temperature exceeds 45℃. In order to avoid extruder clogging, low temperature filament(PLA/PETG/TPU) is not allowed to be loaded." msgstr "Ganberaren uneko tenperaturak edo helburuko tenperaturak 45 ℃ gainditzen ditu. Estrusorea buxatzea saihesteko, ezin da tenperatura baxuko filamenturik (PLA/PETG/TPU) kargatu." msgid "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder. In order to avoid extruder clogging, it is not allowed to set the chamber temperature." msgstr "Tenperatura baxuko filamentua (PLA/PETG/TPU) dago kargatuta estrusorean. Estrusorea buxatzea saihesteko, ezin da ganberako tenperatura ezarri." msgid "When you set the chamber temperature below 40℃, the chamber temperature control will not be activated, and the target chamber temperature will automatically be set to 0℃." msgstr "Ganberako tenperatura 40 ℃-tik behera ezartzen duzunean, ganberako tenperaturaren kontrola ez da aktibatuko, eta ganberako tenperatura helburua automatikoki 0 ℃-ra ezarriko da." msgid "Failed to start print job" msgstr "Huts egin du inprimatze-lana abiaraztean" msgid "This calibration does not support the currently selected nozzle diameter" msgstr "Kalibrazio honek ez du onartzen hautatuta dagoen pitaren diametroa" msgid "Current flowrate cali param is invalid" msgstr "Fluxua kalibratzeko uneko parametroa ez da baliozkoa" msgid "Selected diameter and machine diameter do not match" msgstr "Hautatutako diametroa eta makinaren diametroa ez datoz bat" msgid "Failed to generate cali G-code" msgstr "Hutsegitea gertatu da kalibrazioko G-Code-a sortzean" msgid "Calibration error" msgstr "Kalibrazio akatsa" # AI Translated msgid "Network unavailable" msgstr "Sarea ez dago erabilgarri" msgid "Resume Printing" msgstr "Berrekin inprimaketari" msgid "Resume (defects acceptable)" msgstr "Berrekin inprimaketari (akatsak onargarriak)" msgid "Resume (problem solved)" msgstr "Berrekin inprimaketari (arazoa konponduta)" msgid "Stop Printing" msgstr "Gelditu inprimaketa" msgid "Check Assistant" msgstr "Egiaztatu laguntzailea" msgid "Filament Extruded, Continue" msgstr "Filamentua estruitu da; jarraitu" msgid "Not Extruded Yet, Retry" msgstr "Oraindik ez da estruitu; saiatu berriro" msgid "Finished, Continue" msgstr "Amaituta; jarraitu" msgid "Filament Loaded, Resume" msgstr "Filamentua kargatuta; berrekin" msgid "View Liveview" msgstr "Ikusi zuzeneko ikuspegia" msgid "No Reminder Next Time" msgstr "Ez gogorarazi hurrengoan" # AI Translated msgid "Recheck" msgstr "Berriz egiaztatu" msgid "Ignore. Don't Remind Next Time" msgstr "Ez ikusi egin. Ez gogorarazi hurrengoan" msgid "Ignore this and Resume" msgstr "Ez ikusi honi eta berrekin" msgid "Problem Solved and Resume" msgstr "Arazoa konponduta; berrekin" msgid "Got it, Turn off the Fire Alarm." msgstr "Ulertuta; itzali sute-alarma." msgid "Retry (problem solved)" msgstr "Saiatu berriro (arazoa konponduta)" msgid "Stop Drying" msgstr "Gelditu lehortzea" msgid "Proceed" msgstr "Jarraitu" # AI Translated msgid "Abort" msgstr "Abortatu" # AI Translated msgid "Disable Purification for This Print" msgstr "Desgaitu araztea inprimaketa honetarako" # AI Translated msgid "Don't Remind Me" msgstr "Ez gogorarazi" msgid "Retry" msgstr "Saiatu berriro" msgid "Resume" msgstr "Berrekin" msgid "Unknown error." msgstr "Errore ezezaguna." # AI Translated msgid "Loading ..." msgstr "Kargatzen ..." msgid "default" msgstr "lehenetsia" #, boost-format msgid "Edit Custom G-code (%1%)" msgstr "Editatu G-code Pertsonalizatua (%1%)" msgid "Built-in placeholders (Double click item to add to G-code)" msgstr "Posizio-markagailuak txertatuta (egin klik bikoitza elementuan, G-Code-ra gehitzeko)" msgid "Search G-code placeholders" msgstr "Bilatu G-codearen posizio-markagailuak" msgid "Add selected placeholder to G-code" msgstr "Gehitu hautatutako posizio-markagailua G-codera" msgid "Select placeholder" msgstr "Hautatu posizio-markagailua" msgid "[Global] Slicing State" msgstr "Xerraketaren egoera [Globala]" msgid "Read Only" msgstr "Irakurtzeko soilik" msgid "Read Write" msgstr "Irakurketa Idazketa" msgid "Slicing State" msgstr "Xerraketaren egoera" msgid "Print Statistics" msgstr "Inprimaketaren estatistikak" msgid "Objects Info" msgstr "Objektuen informazioa" msgid "Dimensions" msgstr "Dimentsioak" msgid "Temperatures" msgstr "Tenperaturak" msgid "Timestamps" msgstr "Denbora-markak" #, boost-format msgid "Specific for %1%" msgstr "Espezifikoa %1% (r)entzako" msgid "Presets" msgstr "Aurrezarpenak" msgid "Print settings" msgstr "Inprimaketaren ezarpenak" msgid "Filament settings" msgstr "Filamentuaren ezarpenak" msgid "SLA Materials settings" msgstr "SLA materialen ezarpenak" msgid "Printer settings" msgstr "Inprimagailuaren ezarpenak" msgid "parameter name" msgstr "parametroaren izena" msgid "layers" msgstr "geruzak" msgid "Range" msgstr "Barrutia" msgid "Empty string" msgstr "Kate hutsa" msgid "Value is out of range." msgstr "Balioa tartetik kanpo dago." #, c-format, boost-format msgid "%s can’t be a percentage" msgstr "%s -k ezin du ehuneko bat izan" #, c-format, boost-format msgid "Value %s is out of range, continue?" msgstr "%s balioa tartetik kanpo dago. Jarraitu nahi duzu?" msgid "Parameter validation" msgstr "Parametroen baliozkotzea" #, c-format, boost-format msgid "Value %s is out of range. The valid range is from %d to %d." msgstr "%s balioa tartetik kanpo dago. Baliozko tartea %d eta %d artekoa da." #, c-format, boost-format msgid "" "Is it %s%% or %s %s?\n" "YES for %s%%, \n" "NO for %s %s." msgstr "" "%s%% edo %s %s da?\n" "BAI %s%%-(r)entzat,\n" "EZ %s %s-(r)entzat." #, boost-format msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\"" msgstr "Sarrera-formatuak ez du balio. Espero den dimentsio-bektorea formatu honetan espero da: \"%1%\"" msgid "Input value is out of range" msgstr "Sarrera-balioa tartetik kanpo dago" msgid "Some extension in the input is invalid" msgstr "Sartutako luzapenen bat ez da baliozkoa" msgid "This parameter expects a valid template." msgstr "Parametro honek baliozko txantiloi bat behar du." # AI Translated msgid "Invalid pattern. Use N, N#K, or a comma-separated list with optional #K per entry. Examples: 5, 5#2, 1,7,9, 5,9#2,18." msgstr "Patroi baliogabea. Erabili N, N#K edo komaz bereizitako zerrenda bat, sarrera bakoitzean aukerako #K erabilita. Adibideak: 5, 5#2, 1,7,9, 5,9#2,18." #, boost-format msgid "Invalid format. Expected vector format: \"%1%\"" msgstr "Formatuak ez du balio. Espero den formatu bektoriala: \"%1%\"" msgid "N/A" msgstr "N/A" msgid "System agents" msgstr "Sistema-agenteak" msgid "No plugin selected" msgstr "Ez da pluginik hautatu" msgid "Add plugin" msgstr "Gehitu plugina" msgid "Select plugin" msgstr "Hautatu plugina" msgid "Remove plugin" msgstr "Kendu plugina" msgid "Configure" msgstr "Konfiguratu" #, c-format, boost-format msgid "Configure (%d)" msgstr "Konfiguratu (%d)" msgid "Pick" msgstr "Hautatu" msgid "Summary" msgstr "Laburpena" msgid "Layer Height" msgstr "Geruza-altuera" msgid "Line Width" msgstr "Lerro-zabalera" msgid "Actual Speed" msgstr "Uneko abiadura" msgid "Acceleration" msgstr "Azelerazioa" msgid "Jerk" msgstr "Jerka" msgid "Fan Speed" msgstr "Haizagailuaren abiadura" msgid "Flow" msgstr "Fluxua" msgid "Actual Flow" msgstr "Benetako fluxua" msgid "Tool" msgstr "Erreminta" msgid "Layer Time" msgstr "Geruza-denbora" msgid "Layer Time (log)" msgstr "Geruza-denbora (log)" msgid "Pressure Advance" msgstr "Presio linealaren aitzinapena" msgid "Noop" msgstr "Eragiketarik ez" msgid "Retract" msgstr "Atzera-egiteak" msgid "Unretract" msgstr "Des-atzera-egiteak" msgid "Seam" msgstr "Jostura" msgid "Tool Change" msgstr "Erreminta aldaketa" msgid "Color Change" msgstr "Kolore aldaketa" msgid "Pause Print" msgstr "Pausatu inprimaketa" msgid "Travel" msgstr "Desplazamenduak" msgid "Wipe" msgstr "Purgak" msgid "Extrude" msgstr "Estruitu" msgid "Inner wall" msgstr "Barruko horma" msgid "Outer wall" msgstr "Kanpoko horma" msgid "Overhang wall" msgstr "Irtenguneko horma" msgid "Sparse infill" msgstr "Dentsitate baxuko betegarria" msgid "Internal solid infill" msgstr "Barruko betegarri solidoa" msgid "Top surface" msgstr "Goiko gainazala" msgid "Bridge" msgstr "Zubia" msgid "Gap infill" msgstr "Tarte-betegarria" msgid "Skirt" msgstr "Gona" msgid "Support interface" msgstr "Euskarri interfazea" msgid "Prime tower" msgstr "Purgatze-dorrea" msgid "Bottom surface" msgstr "Beheko gainazala" msgid "Internal bridge" msgstr "Barruko zubia" msgid "Support transition" msgstr "Euskarri trantsizioa" msgid "Mixed" msgstr "Nahasia" msgid "Height: " msgstr "Altuera: " msgid "Width: " msgstr "Zabalera: " msgid "Flow: " msgstr "Fluxua: " msgid "Fan: " msgstr "Haizagailua: " msgid "Temperature: " msgstr "Tenperatura: " msgid "Layer Time: " msgstr "Geruza-denbora: " msgid "Tool: " msgstr "Erreminta: " msgid "Color: " msgstr "Kolorea: " msgid "Acceleration: " msgstr "Azelerazioak: " msgid "Jerk: " msgstr "Jerk-a: " msgid "PA: " msgstr "PA: " msgid "mm/s" msgstr "mm/s" msgid "mm/s²" msgstr "mm/s²" msgid "mm³/s" msgstr "mm³/s" msgid "Flow rate" msgstr "Fluxu-tasa" msgid "Fan speed" msgstr "Haizagailuaren abiadura" msgid "Time" msgstr "Denbora" msgid "Speed: " msgstr "Abiadura: " msgid "Actual speed profile" msgstr "Benetako abiadura-profila" msgid "Statistics of All Plates" msgstr "Plaka guztien estatistikak" msgid "Display" msgstr "Pantaila" msgid "Flushed" msgstr "Deskargatuta" msgid "Tower" msgstr "Dorrea" msgid "Total" msgstr "Totala" msgid "Total estimation" msgstr "Guztizko zenbatespena" msgid "Total time" msgstr "Denbora, guztira" msgid "Total cost" msgstr "Kostua, guztira" msgid "Automatically re-slice according to the optimal filament grouping, and the grouping results will be displayed after slicing." msgstr "Berriro xerratu automatikoki filamentuen taldekatze optimoaren arabera; taldekatze-emaitzak xerratu ondoren bistaratuko dira." msgid "Filament Grouping" msgstr "Filamentuen taldekatzea" msgid "Why this grouping" msgstr "Zergatik taldekatze hau" msgid "Please place filaments on the printer based on grouping result." msgstr "Jarri filamentuak inprimagailuan taldekatze-emaitzaren arabera." msgid "Tips:" msgstr "Aholkuak:" msgid "Current grouping of slice result is not optimal." msgstr "Xerratzearen emaitzaren uneko taldekatzea ez da optimoa." #, boost-format msgid "Increase %1%g filament and %2% changes compared to optimal grouping." msgstr "Filamentua %1% g eta aldaketak %2% handitzen ditu taldekatze optimoarekin alderatuta." #, boost-format msgid "Increase %1%g filament and save %2% changes compared to optimal grouping." msgstr "Filamentua %1% g handitzen du eta %2% aldaketa aurrezten ditu taldekatze optimoarekin alderatuta." #, boost-format msgid "Save %1%g filament and increase %2% changes compared to optimal grouping." msgstr "Aurreztu %1% g filamentua eta handitu %2% aldaketa taldekatze optimoarekin alderatuta." #, boost-format msgid "Save %1%g filament and %2% changes compared to a printer with one nozzle." msgstr "Aurreztu %1% g filamentua eta %2% aldaketa pita bakarreko inprimagailu batekin alderatuta." #, boost-format msgid "Save %1%g filament and increase %2% changes compared to a printer with one nozzle." msgstr "Aurreztu %1% g filamentua eta handitu %2% aldaketa pita bakarreko inprimagailu batekin alderatuta." #, boost-format msgid "Increase %1%g filament and save %2% changes compared to a printer with one nozzle." msgstr "Handitu %1% g filamentua eta aurreztu %2% aldaketa pita bakarreko inprimagailu batekin alderatuta." msgid "Set to Optimal" msgstr "Ezarri optimo gisa" msgid "Regroup filament" msgstr "Taldekatu berriro filamentua" msgid "up to" msgstr "honaino" msgid "above" msgstr "honen gainean" msgid "from" msgstr "hemendik" msgid "Usage" msgstr "Erabilera" msgid "Layer height (mm)" msgstr "Geruza-altuera (mm)" msgid "Line width (mm)" msgstr "Lerro-zabalera (mm)" msgid "Speed (mm/s)" msgstr "Abiadura (mm/s)" msgid "Actual Speed (mm/s)" msgstr "Uneko abiadura (mm/s)" msgid "Acceleration (mm/s²)" msgstr "Azelerazioa (mm/s²)" msgid "Jerk (mm/s)" msgstr "Jerka (mm/s)" msgid "Fan speed (%)" msgstr "Haizagailuaren abiadura (%)" msgid "Temperature (℃)" msgstr "Tenperatura (°C)" msgid "Volumetric flow rate (mm³/s)" msgstr "Fluxu-tasa bolumetrikoa (mm³/s)" msgid "Actual volumetric flow rate (mm³/s)" msgstr "Uneko fluxu-tasa bolumetrikoa (mm³/s)" msgid "Seams" msgstr "Joskurak" msgid "Filament changes" msgstr "Filamentu-aldaketak" msgid "Options" msgstr "Aukerak" msgid "Cost" msgstr "Kostua" msgid "Filament change times" msgstr "Filamentu aldaketaren denborak" msgid "Tool changes" msgstr "Erreminta aldaketak" msgid "Color change" msgstr "Kolore aldaketa" msgctxt "Noun" msgid "Print" msgstr "Inprimaketa" msgid "Printer" msgstr "Inprimagailua" msgid "Time Estimation" msgstr "Denbora zenbatespena" msgid "Normal mode" msgstr "Modu normala" msgid "Total Filament" msgstr "Filamentua, guztira" msgid "Model Filament" msgstr "Filamentu modeloa" msgid "Prepare time" msgstr "Prestaketa denbora" msgid "Model printing time" msgstr "Modeloa inprimatzeko denbora" msgid "Show stealth mode" msgstr "Modu isila erakutsi" msgid "Show normal mode" msgstr "Modu normala erakutsi" msgid "" "An object is placed in the left/right nozzle-only area or exceeds the printable height of the left nozzle.\n" "Please ensure the filaments used by this object are not arranged to other nozzles." msgstr "" "Objektu bat ezkerreko/eskuineko pitarako soilik den eremuan dago, edo ezkerreko pitaren inprimatze-altuera gainditzen du.\n" "Ziurtatu objektu honek erabiltzen dituen filamentuak ez daudela beste pita batzuetara esleituta." msgid "" "An object is laid over the boundary of plate or exceeds the height limit.\n" "Please solve the problem by moving it totally on or off the plate, and confirming that the height is within the build volume." msgstr "" "Objektu batek plakaren muga gainditzen du edo altuera-muga gainditu du.\n" "Konpondu arazoa objektua guztiz plakaren barrura edo kanpora eramanez eta altuera eraikuntza-bolumenaren barruan dagoela egiaztatuz." msgid "Variable layer height" msgstr "Geruza-altuera aldakorra" msgid "Adaptive" msgstr "Egokigarria" msgid "Quality / Speed" msgstr "Kalitatea / Abiadura" # AI Translated msgctxt "Mesh action" msgid "Smooth" msgstr "Leundu" msgid "Radius" msgstr "Erradioa" msgid "Keep min" msgstr "Mantendu minimoa" msgid "Add detail" msgstr "Gehitu xehetasuna" msgid "Remove detail" msgstr "Ezabatu xehetasuna" msgid "Reset to base" msgstr "Berrezarri oinarrira" msgid "Smoothing" msgstr "Leuntzen" msgid "Increase/decrease edit area" msgstr "Edizio-eremua handitu/txikitu" msgid "Sequence" msgstr "Sekuentzia" msgid "Object selection" msgstr "Objektuen hautaketa" msgid "number keys" msgstr "zenbaki-teklak" msgid "Number keys can quickly change the color of objects" msgstr "Zenbaki-teklek objektuen kolorea azkar alda dezakete" msgid "Following objects are laid over the boundary of plate or exceeds the height limit:\n" msgstr "Objektu hauek plakaren mugatik kanpo daude edo altuera-muga gainditzen dute:\n" msgid "Please solve the problem by moving it totally on or off the plate, and confirming that the height is within the build volume.\n" msgstr "Konpondu arazoa objektua guztiz plakaren barrura edo kanpora eramanez eta altuera eraikuntza-bolumenaren barruan dagoela egiaztatuz.\n" #, c-format, boost-format msgid "The position or size of some models exceeds the %s's printable range." msgstr "Zenbait modeloren posizioak edo tamainak %s-ren inprimatze-eremua gainditzen du." #, c-format, boost-format msgid "The position or size of the model %s exceeds the %s's printable range." msgstr "%s modeloaren posizioak edo tamainak %s-ren inprimatze-eremua gainditzen du." msgid " Please check and adjust the part's position or size to fit the printable range:\n" msgstr " Egiaztatu eta doitu piezaren posizioa edo tamaina inprimatze-eremura egokitzeko:\n" #, boost-format msgid "Left nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%\n" msgstr "Ezkerreko pita: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%\n" #, boost-format msgid "Right nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%" msgstr "Eskuineko pita: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%" msgid "Tool move" msgstr "Mugitzeko Erreminta" msgid "Tool Rotate" msgstr "Biratzeko Erreminta" msgid "Move object" msgstr "Objektua mugitu" msgid "Auto orientation options" msgstr "Automatikoki orientatzeko aukerak" msgid "Enable rotation" msgstr "Biraketa gaitu" msgid "Optimize support interface area" msgstr "Optimizatu laguntza-interfazearen eremua" msgid "Orient" msgstr "Orientatu" msgid "Arrange options" msgstr "Antolaketa aukerak" msgid "0 means auto spacing." msgstr "0k tarte automatikoa esan nahi du." msgid "Auto rotate for arrangement" msgstr "Biratu automatikoki antolaketarako" msgid "Allow multiple materials on same plate" msgstr "Onartu hainbat material plaka berean" msgid "Avoid extrusion calibration region" msgstr "Saihestu estrusioaren kalibraketa-eremua" msgid "Align to Y axis" msgstr "Lerrokatu Y ardatzarekin" # AI Translated msgctxt "Camera View" msgid "Front" msgstr "Aurrekoa" msgctxt "Camera View" msgid "Back" msgstr "Atzekoa" # AI Translated #. TRN To be shown in the main menu View->Top msgctxt "Camera View" msgid "Top" msgstr "Goikoa" # AI Translated #. TRN To be shown in the main menu View->Bottom msgctxt "Camera View" msgid "Bottom" msgstr "Behekoa" msgctxt "Camera View" msgid "Left" msgstr "Ezkerrekoa" msgctxt "Camera View" msgid "Right" msgstr "Eskuinekoa" msgid "Add" msgstr "Gehitu" msgid "Add plate" msgstr "Plaka gehitu" msgid "Auto orient all/selected objects" msgstr "Automatikoki orientatu hautatutako objektuak/objektu guztiak" msgid "Auto orient all objects on current plate" msgstr "Automatikoki orientatu uneko plakako objektu guztiak" msgid "Arrange all objects" msgstr "Antolatu objektu guztiak" msgid "Arrange objects on selected plates" msgstr "Antolatu hautatutako plaketako objektu guztiak" msgid "Split to objects" msgstr "Objektuetan zatitu" msgid "Assembly View" msgstr "Multzoaren Ikuspegia" msgid "Select Plate" msgstr "Hautatu plaka" msgid "Slicing" msgstr "Xerratzen" msgid "Slice all" msgstr "Xerratu dena" msgid "Failed" msgstr "Huts egin du" msgid "All Plates" msgstr "Plaka guztiak" msgid "Stats" msgstr "Estatistikak" msgid "Slice" msgstr "Xerratu" msgid "Review" msgstr "Berrikusi" msgid "Assembly Return" msgstr "Multzokatu berriro" msgid "Return" msgstr "Itzuli" msgid "Canvas Toolbar" msgstr "Mihisearen tresna-barra" msgid "Fit camera to scene or selected object." msgstr "Doitu kamera eszenara edo hautatutako objektura." msgid "3D Navigator" msgstr "3D nabigatzailea" msgid "Zoom button" msgstr "Zoom botoia" msgid "Overhangs" msgstr "Irtenguneak" msgid "Outline" msgstr "Ingerada" msgid "Wireframe" msgstr "Alanbre-egitura" msgid "Realistic View" msgstr "Ikuspegi errealista" msgid "Perspective" msgstr "Perspektiba" msgid "Axes" msgstr "Ardatzak" msgid "Gridlines" msgstr "Sareta-lerroak" msgid "Labels" msgstr "Etiketak" msgid "Paint Toolbar" msgstr "Margotzeko tresna-barra" msgid "Explosion Ratio" msgstr "Esplosio-ratioa" msgid "Section View" msgstr "Sekzio-ikuspegia" msgid "Assembly Control" msgstr "Muntaketa-kontrola" msgid "Selection Mode" msgstr "Hautapen modua" msgid "Total Volume:" msgstr "Bolumena, guztira:" msgid "Assembly Info" msgstr "Multzoaren informazioa" msgid "Volume:" msgstr "Bolumena:" msgid "Size:" msgstr "Tamaina:" #, c-format, boost-format msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)." msgstr "G-code ibilbideen gatazkak aurkitu dira %d geruzan, Z = %.2lf mm. Urrundu gehiago gatazkan dauden objektuak (%s <-> %s)." msgid "An object is laid over the plate boundaries." msgstr "Objektu bat plakaren mugen gainean dago." msgid "A G-code path goes beyond the max print height." msgstr "G-code-ko ibilbide batek inprimatze-altuera maximoa gainditzen du." msgid "A G-code path goes beyond plate boundaries." msgstr "G-code ibilbide bat plakaren mugetatik kanpo doa." msgid "Not support printing 2 or more TPU filaments." msgstr "Ez da onartzen bi TPU filamenturekin edo gehiagorekin inprimatzea." #, c-format, boost-format msgid "Tool %d" msgstr "%d tresna" #, c-format, boost-format msgid "Filament %s is placed in the %s, but the generated G-code path exceeds the printable range of the %s." msgstr "%s filamentua %s(e)n dago, baina sortutako G-code ibilbideak %s-ren inprimatze-eremua gainditzen du." #, c-format, boost-format msgid "Filaments %s are placed in the %s, but the generated G-code path exceeds the printable range of the %s." msgstr "%s filamentuak %s(e)n daude, baina sortutako G-code ibilbideak %s-ren inprimatze-eremua gainditzen du." #, c-format, boost-format msgid "Filament %s is placed in the %s, but the generated G-code path exceeds the printable height of the %s." msgstr "%s filamentua %s(e)n dago, baina sortutako G-code ibilbideak %s-ren inprimatze-altuera gainditzen du." #, c-format, boost-format msgid "Filaments %s are placed in the %s, but the generated G-code path exceeds the printable height of the %s." msgstr "%s filamentuak %s(e)n daude, baina sortutako G-code ibilbideak %s-ren inprimatze-altuera gainditzen du." msgid "Open wiki for more information." msgstr "Ireki wikia informazio gehiago lortzeko." msgid "Only the object being edited is visible." msgstr "Editatzen ari den objektua bakarrik dago ikusgai." #, c-format, boost-format msgid "Filaments %s cannot be printed directly on the surface of this plate." msgstr "%s filamentuak ezin dira zuzenean plaka honen gainazalean inprimatu." msgid "PLA and PETG filaments detected in the mixture. Adjust parameters according to the Wiki to ensure print quality." msgstr "PLA eta PETG filamentuak hauteman dira nahasketan. Doitu parametroak Wikiaren arabera inprimatze-kalitatea bermatzeko." msgid "The prime tower extends beyond the plate boundary." msgstr "Purgatze-dorrea plakaren mugetatik kanpo doa." msgid "Partial flushing volume set to 0. Multi-color printing may cause color mixing in models. Please readjust flushing settings." msgstr "Purgatze-bolumen partziala 0ra ezarri da. Kolore anitzeko inprimatzeak koloreak nahastea eragin dezake modeloetan. Doitu berriro purgatze-ezarpenak." msgid "Click Wiki for help." msgstr "Egin klik Wikian laguntza jasotzeko." msgid "Click here to regroup" msgstr "Egin klik hemen berriz taldekatzeko" msgid "Flushing Volume" msgstr "Purgatze-bolumena" msgid "Calibration step selection" msgstr "Hautatu kalibrazioaren pausoa" msgid "Micro lidar calibration" msgstr "Micro Lidar kalibrazioa" msgid "Bed leveling" msgstr "Ohearen nibelatzea" msgid "High-temperature Heatbed Calibration" msgstr "Tenperatura altuko ohe beroaren kalibrazioa" msgid "Nozzle clumping detection Calibration" msgstr "Pitan material-metaketa detektatzeko kalibrazioa" msgid "Calibration program" msgstr "Kalibrazio-programa" msgid "" "The calibration program detects the status of your device automatically to minimize deviation.\n" "It keeps the device performing optimally." msgstr "" "Kalibrazio-programak automatikoki detektatzen du zure gailuaren egoera, desbideratzea minimizatzeko.\n" "Gailua era optimoan funtzionatzen mantentzen du." msgid "Calibration Flow" msgstr "Kalibrazio-fluxua" msgid "Start Calibration" msgstr "Hasi kalibrazioa" msgid "Completed" msgstr "Amaituta" msgid "Calibrating" msgstr "Kalibratzen" msgid "No step selected" msgstr "Ez da pausorik hautatu" msgid "Auto-record Monitoring" msgstr "Grabatze-automatikoaren monitorizazioa" msgid "Go Live" msgstr "Zuzenekora joan" msgid "Liveview Retry" msgstr "Saiatu berriro zuzeneko bideoarekin" msgid "Resolution" msgstr "Bereizmena" msgid "Enable" msgstr "Gaitu" msgid "Hostname or IP" msgstr "Host-aren izena edo IPa" msgid "Custom camera source" msgstr "Kameraren iturburu pertsonalizatua" msgid "Show \"Live Video\" guide page." msgstr "Erakutsi \"Zuzeneko bideoa\"-ren gida." msgid "Connect Printer (LAN)" msgstr "Konektatu inprimagailua (LAN)" msgid "Please input the printer access code:" msgstr "Mesedez, sartu inprimagailura sartzeko kodea:" msgid "" "You can find it in \"Settings > Network > Access code\"\n" "on the printer, as shown in the figure:" msgstr "Inprimagailuan aurki dezakezu, \"Ezarpenak > Sarea > Sarbide-kodea\" atalean, irudian erakusten den bezala:" msgid "" "You can find it in \"Setting > Setting > LAN only > Access Code\"\n" "on the printer, as shown in the figure:" msgstr "Inprimagailuan aurki dezakezu, \"Ezarpenak > Ezarpenak > LAN bakarrik > Sarbide-kodea\" atalean, irudian erakusten den bezala:" msgid "Invalid input" msgstr "Sarrera baliogabea" msgid "New Window" msgstr "Leiho berria" msgid "Open a new window" msgstr "Ireki leiho berrian" msgid "Closing application" msgstr "Aplikazioa ixten" msgid "Closing Application while some presets are modified." msgstr "Aplikazioa ixten, aurrezarpen batzuk aldatu ondoren." msgid "Logging" msgstr "Saioa hasten" msgid "Prepare" msgstr "Prestatu" msgid "Preview" msgstr "Aurrebista" msgid "Device" msgstr "Gailua" msgid "Multi-device" msgstr "Gailu anitz" msgid "Project" msgstr "Proiektua" msgid "Yes" msgstr "Bai" msgid "No" msgstr "Ez" msgid "will be closed before creating a new model. Do you want to continue?" msgstr "itxi egingo da modelo berri bat sortu aurretik. Jarraitu nahi duzu?" msgid "Slice plate" msgstr "Plaka xerratu" msgid "Print plate" msgstr "Plaka inprimatu" msgid "Export G-code file" msgstr "Esportatu G-code fitxategia" msgctxt "Verb" msgid "Print" msgstr "Inprimatu" msgid "Export plate sliced file" msgstr "Esportatu plakan xerratutako objektuak fitxategi batera" msgid "Send" msgstr "Bidali" msgid "Export all sliced file" msgstr "Esportatu xerratutako objektu guztiak fitxategi batera" msgid "Print all" msgstr "Inprimatu dena" msgid "Send all" msgstr "Bidali dena" msgid "Send to Multi-device" msgstr "Bidali gailu ugaritara" msgid "Keyboard Shortcuts" msgstr "Teklatuko lasterbideak" msgid "Show the list of keyboard shortcuts" msgstr "Erakutsi teklatuko lasterbideen zerrenda" msgid "Setup Wizard" msgstr "Konfigurazio-laguntzailea" msgid "Show Configuration Folder" msgstr "Erakutsi konfigurazio-karpeta" msgid "Troubleshoot Center" msgstr "Arazoak konpontzeko zentroa" msgid "Open Network Test" msgstr "Ireki sare-testa" msgid "Show Tip of the Day" msgstr "Erakutsi eguneko aholkua" msgid "Check for Updates" msgstr "Egiaztatu eguneraketak" #, c-format, boost-format msgid "&About %s" msgstr "%s-i buruz" msgid "Upload Models" msgstr "Kargatu modeloak" msgid "Download Models" msgstr "Deskargatu modeloak" msgid "Default View" msgstr "Lehenetsitako bista" msgid "Top View" msgstr "Goiko bista" msgid "Bottom View" msgstr "Beheko bista" msgid "Front View" msgstr "Aurreko bista" # AI Translated msgctxt "Camera View" msgid "Rear" msgstr "Atzekoa" msgid "Rear View" msgstr "Atzeko bista" msgid "Left View" msgstr "Ezkerreko bista" msgid "Right View" msgstr "Eskuineko bista" msgid "Start a new window" msgstr "Ireki leiho berria" msgid "New Project" msgstr "Proiektu berria" msgid "Start a new project" msgstr "Hasi proiektu berria" msgid "Open a project file" msgstr "Ireki proiektu-fitxategia" msgid "Recent files" msgstr "Azken fitxategiak" msgid "Save Project" msgstr "Gorde proiektua" msgid "Save current project to file" msgstr "Gorde uneko proiektua fitxategi batean" msgid "Save Project as" msgstr "Gorde proiektua honela" msgid "Save current project as" msgstr "Gorde uneko proiektua honela" msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF" msgstr "Inportatu 3MF/STL/STEP/SVG/OBJ/AMF" msgid "Load a model" msgstr "Modeloa kargatu" msgid "Import Zip Archive" msgstr "Inportatu ZIP fitxategia" msgid "Load models contained within a zip archive" msgstr "Kargatu ZIP fitxategi baten barnean dauden modeloak" msgid "Import Configs" msgstr "Inportatu ezarpenak" msgid "Load configs" msgstr "Kargatu ezarpenak" msgid "Import" msgstr "Inportatu" msgid "Export all objects as one STL" msgstr "Esportatu objektu guztiak STL bakar gisa" msgid "Export all objects as STLs" msgstr "Esportatu objektu guztiak STL gisa" msgid "Export all objects as one DRC" msgstr "Esportatu objektu guztiak DRC bakar gisa" msgid "Export all objects as DRCs" msgstr "Esportatu objektu guztiak DRC gisa" msgid "Export Generic 3MF" msgstr "Esportatu 3MF generikoa" msgid "Export 3MF file without using some 3mf-extensions" msgstr "Esportatu 3MF fitxategia 3MF hedapen batzuk erabili gabe" msgid "Export current sliced file" msgstr "Esportatu xerratutako uneko plaka fitxategi batetara" msgid "Export all plate sliced file" msgstr "Esportatu xerratutako plaka guztiak fitxategi batetara" msgid "Export G-code" msgstr "Esportatu G-codea" msgid "Export current plate as G-code" msgstr "Esportatu uneko plaka G-code gisa" msgid "Export toolpaths as OBJ" msgstr "Esportatu inprimatze-ibilbideak OBJ gisa" msgid "Export Preset Bundle" msgstr "Esportatu aurrezarpen-paketea" msgid "Export current configuration to files" msgstr "Esportatu uneko konfigurazioa fitxategietara" msgid "Export" msgstr "Esportatu" msgid "Quit" msgstr "Irten programatik" msgid "Undo" msgstr "Desegin" msgid "Redo" msgstr "Berregin" msgid "Cut" msgstr "Ebaki" msgid "Cut selection to clipboard" msgstr "Ebaki hautaketa arbelean" msgid "Copy" msgstr "Kopiatu" msgid "Copy selection to clipboard" msgstr "Kopiatu hautaketa arbelean" msgid "Paste" msgstr "Itsatsi" msgid "Paste clipboard" msgstr "Itsatsi arbelean" msgid "Delete Selected" msgstr "Ezabatu hautaketa" msgid "Deletes the current selection" msgstr "Ezabatu uneko hautaketa" msgid "Deletes all objects" msgstr "Ezabatu objektu guztiak" msgid "Clone Selected" msgstr "Klonatu hautaketa" msgid "Clone copies of selections" msgstr "Hautaketen kopiak klonatu" msgid "Duplicate Current Plate" msgstr "Bikoiztu Uneko Plaka" msgid "Duplicate the current plate" msgstr "Bikoiztu uneko plaka" msgid "Selects all objects" msgstr "Hautatu objektu guztiak" msgid "Deselects all objects" msgstr "Desautatu objektu guztiak" msgid "Use Perspective View" msgstr "Erabili Perspektiba Ikuspegia" msgid "Use Orthogonal View" msgstr "Erabili Ikuspegi Ortogonala" msgid "Auto Perspective" msgstr "Perspektiba automatikoa" msgid "Automatically switch between orthographic and perspective when changing from top/bottom/side views." msgstr "Aldatu automatikoki ortografikoaren eta perspektibaren artean, goiko/beheko/alboko ikuspegiak aldatzean." msgid "Show &G-code Window" msgstr "Erakutsi &G-code Leihoa" msgid "Show G-code window in Preview scene." msgstr "Erakutsi G-codearen leihoa aurrebistaren eszenan." msgid "Show 3D Navigator" msgstr "Erakutsi 3D nabigatzailea" msgid "Show 3D navigator in Prepare and Preview scene." msgstr "Erakutsi 3D nabigatzailea Prestatu eta Aurrebista eszenetan." msgid "Show Gridlines" msgstr "Erakutsi sareta-lerroak" msgid "Show Gridlines on plate" msgstr "Erakutsi sareta-lerroak plakan" msgid "Reset Window Layout" msgstr "Berrezarri Leihoaren Diseinua" msgid "Reset to default window layout" msgstr "Berrezarri leihoaren diseinu lehenetsia" msgid "Show &Labels" msgstr "Erakutsi etiketak" msgid "Show object labels in 3D scene." msgstr "Erakutsi etiketak 3D eszenan." msgid "Show &Overhang" msgstr "Erakutsi Irtenguneak" msgid "Show object overhang highlight in 3D scene." msgstr "Erakutsi objektuaren irtenguneen nabarmentzea 3D eszenan." msgid "Show Selected Outline (beta)" msgstr "Erakutsi Hautatutako Ingerada (beta)" msgid "Show outline around selected object in 3D scene." msgstr "Erakutsi hautatutako objektuaren inguruko ingerada 3D eszenan." msgid "Preferences" msgstr "Hobespenak" # AI Translated msgctxt "Menu" msgid "Edit" msgstr "Editatu" msgid "View" msgstr "Bista" msgid "Preset Bundle" msgstr "Aurrezarpen-paketea" msgid "Sync Presets" msgstr "Sinkronizatu aurrezarpenak" msgid "Pull and apply the latest presets from OrcaCloud" msgstr "Eskuratu eta aplikatu OrcaCloudeko azken aurrezarpenak" msgid "You must be logged in to sync presets from cloud." msgstr "Hodeiko aurrezarpenak sinkronizatzeko saioa hasita izan behar duzu." msgid "Syncing presets from cloud…" msgstr "Hodeiko aurrezarpenak sinkronizatzen…" msgid "Help" msgstr "Laguntza" msgid "Temperature Calibration" msgstr "Tenperaturaren kalibrazioa" msgid "Max flowrate" msgstr "Fluxu maximoaren testa" msgid "Pressure advance" msgstr "Presio linealaren aitzinapena" msgid "Flow ratio" msgstr "Fluxu-ratioa" msgid "Flow Rate Calibration" msgstr "Fluxu-tasaren kalibrazioa" msgid "Retraction" msgstr "Atzera-egitea" msgid "Cornering" msgstr "Kurbatzea" msgid "Cornering calibration" msgstr "Izkinetako mugimenduaren kalibrazioa" msgid "Input Shaping Frequency" msgstr "Sarrera-moldaketaren maiztasuna" msgid "Input Shaping Damping/zeta factor" msgstr "Sarrera-moldaketaren moteltze/zeta faktorea" msgid "Input Shaping" msgstr "Sarrera-moldaketa" msgid "VFA" msgstr "VFA" msgid "Calibration Guide" msgstr "Kalibrazio-gida" msgid "&Open G-code" msgstr "Ireki G-codea" msgid "Open a G-code file" msgstr "Ireki G-code fitxategia" msgid "Re&load from Disk" msgstr "Birkargatu diskotik" msgid "Reload the plater from disk" msgstr "Birkargatu oinarria diskotik" msgid "Export &Toolpaths as OBJ" msgstr "Esportatu inprimatze-ibilbideak OBJ gisa" msgid "Open &Slicer" msgstr "Ireki &Xerratzailea" msgid "Open Slicer" msgstr "Ireki xerratzailea" msgid "&Quit" msgstr "Irten" #, c-format, boost-format msgid "Quit %s" msgstr "Irten %s -tik" msgid "&File" msgstr "Fitxategia" msgid "&View" msgstr "&Ikusi" msgid "&Help" msgstr "Laguntza" #, c-format, boost-format msgid "A file exists with the same name: %s. Do you want to overwrite it?" msgstr "Izen bereko fitxategi bat badago: %s. Gainidatzi nahi duzu?" #, c-format, boost-format msgid "A config exists with the same name: %s. Do you want to overwrite it?" msgstr "Izen bereko konfigurazio bat badago: %s. Gainidatzi nahi duzu?" msgid "Overwrite file" msgstr "Ordeztu fitxategia" msgid "Overwrite config" msgstr "Ordeztu konfigurazioa" msgid "Yes to All" msgstr "Bai guztiari" msgid "No to All" msgstr "Ez guztiari" msgid "Choose a directory" msgstr "Hautatu direktorio bat" #, c-format, boost-format msgid "There is %d config exported. (Only non-system configs)" msgid_plural "There are %d configs exported. (Only non-system configs)" msgstr[0] "Konfigurazio %d dago esportatuta. (Sistemakoak ez diren konfigurazioak bakarrik)" msgstr[1] "%d konfigurazio daude esportatuta. (Sistemakoak ez diren konfigurazioak bakarrik)" msgid "Export Result" msgstr "Esportatu emaitza" msgid "Select profile to load:" msgstr "Hautatu kargatu beharreko profila:" msgid "Config files (*.json;*.zip;*.orca_printer;*.orca_bundle;*.orca_filament)|*.json;*.zip;*.orca_printer;*.orca_bundle;*.orca_filament" msgstr "Konfigurazio-fitxategiak (*.json;*.zip;*.orca_printer;*.orca_bundle;*.orca_filament)|*.json;*.zip;*.orca_printer;*.orca_bundle;*.orca_filament" #, c-format, boost-format msgid "There is %d config imported. (Only non-system and compatible configs)" msgid_plural "There are %d configs imported. (Only non-system and compatible configs)" msgstr[0] "Konfigurazio %d dago esportatuta. (Sistemakoak ez diren eta bateragarriak diren konfigurazioak bakarrik)" msgstr[1] "Konfigurazio %d dago esportatuta. (Sistemakoak ez diren eta bateragarriak diren konfigurazioak bakarrik)" msgid "" "\n" "Hint: Make sure you have added the corresponding printer before importing the configs." msgstr "" "\n" "Iradokizuna: Ziurtatu dagokion inprimagailua gehitu duzula konfigurazioak inportatu aurretik." msgid "Import result" msgstr "Inportatu emaitzak" msgid "File is missing" msgstr "Fitxategia falta da" msgid "The project is no longer available." msgstr "Proiektua jada ez dago erabilgarri." msgid "" "Do you want to synchronize your personal data from Orca Cloud?\n" "It contains the following information:\n" "1. The Process presets\n" "2. The Filament presets\n" "3. The Printer presets" msgstr "" "Orca Cloud-etik zure datu pertsonalak sinkronizatu nahi dituzu?\n" "Informazio hau dauka:\n" "1. Prozesuaren aurrezarpenak\n" "2. Filamentuaren aurrezarpenak\n" "3. Inprimagailuaren aurrezarpenak" msgid "Synchronization" msgstr "Sinkronizazioa" msgid "The device cannot handle more conversations. Please retry later." msgstr "Gailuak ezin ditu elkarrizketa gehiago kudeatu. Saiatu berriro geroago." msgid "Player is malfunctioning. Please reinstall the system player." msgstr "Erreproduzitzaileak ez du ondo funtzionatzen. Berrinstalatu sistemaren erreproduzitzailea." msgid "The player is not loaded; please click the \"play\" button to retry." msgstr "Erreproduzigailua ez da kargatu; egin klik \"erreproduzitu\" botoian berriro saiatzeko." msgid "The player is not loaded because the GStreamer GTK video sink is missing or failed to initialize." msgstr "Erreproduzigailua ez da kargatu, GStreamer GTK bideo-irteera falta delako edo ezin izan delako hasieratu." msgid "Please confirm if the printer is connected." msgstr "Berretsi inprimagailua konektatuta dagoela." msgid "The printer is currently busy downloading. Please try again after it finishes." msgstr "Inprimagailua deskargatzen ari da. Saiatu berriro amaitzen duenean." msgid "Printer camera is malfunctioning." msgstr "Inprimagailuaren kamerak ez du behar bezala funtzionatzen." msgid "A problem occurred. Please update the printer firmware and try again." msgstr "Arazo bat gertatu da. Eguneratu inprimagailuaren firmwarea eta saiatu berriro." msgid "LAN Only Liveview is off. Please turn on the liveview on printer screen." msgstr "LAN soilik moduko zuzeneko ikuspegia desaktibatuta dago. Aktibatu zuzeneko ikuspegia inprimagailuaren pantailan." msgid "Please enter the IP of the printer to connect." msgstr "Sartu inprimagailuaren IP helbidea konektatzeko." msgid "Initializing..." msgstr "Hasieratzen..." msgid "Connection Failed. Please check the network and try again" msgstr "Konexioak huts egin du. Egiaztatu sarea eta saiatu berriro" msgid "Please check the network and try again. You can restart or update the printer if the issue persists." msgstr "Egiaztatu sarea eta saiatu berriro. Arazoak jarraitzen badu, inprimagailua berrabiarazi edo eguneratu dezakezu." msgid "The printer has been logged out and cannot connect." msgstr "Inprimagailuaren saioa amaituta dago eta ezin da konektatu." msgid "Video Stopped." msgstr "Bideoa geldituta." msgid "LAN Connection Failed (Failed to start liveview)" msgstr "LAN konexioak huts egin du (ezin izan da zuzeneko ikuspegia abiarazi)" msgid "" "Virtual Camera Tools is required for this task!\n" "Do you want to install them?" msgstr "" "Kamera birtualaren tresnak behar dira zeregin honetarako!\n" "Instalatu nahi dituzu?" msgid "Downloading Virtual Camera Tools" msgstr "Kamera birtualaren tresnak deskargatzen" msgid "" "Another virtual camera is running.\n" "Orca Slicer supports only a single virtual camera.\n" "Do you want to stop this virtual camera?" msgstr "" "Beste kamera birtual bat martxan dago.\n" "OrcaSlicerrek kamera birtual bakarra onartzen du.\n" "Kamera birtual hori gelditu nahi duzu?" #, c-format, boost-format msgid "Virtual camera initialize failed (%s)!" msgstr "Kamera birtuala hasieratzeak huts egin du (%s)!" msgid "Network unreachable" msgstr "Sarea ez dago erabilgarri" msgid "Information" msgstr "Informazioa" msgid "Playing..." msgstr "Erreproduzitzen..." msgid "Loading..." msgstr "Kargatzen..." msgid "Year" msgstr "Urtea" msgid "Month" msgstr "Hilabetea" msgid "All Files" msgstr "Fitxategi guztiak" msgid "Group files by year, recent first." msgstr "Taldekatu fitxategiak urtearen arabera, berrienak lehenengo." msgid "Group files by month, recent first." msgstr "Taldekatu fitxategiak hilabetearen arabera, berrienak lehenengo." msgid "Show all files, recent first." msgstr "Erakutsi fitxategi guztiak, berrienak lehenik." msgid "Timelapse" msgstr "Timelapse-a" msgid "Switch to timelapse files." msgstr "Aldatu timelapse fitxategietara." msgid "Video" msgstr "Bideoa" msgid "Switch to video files." msgstr "Aldatu bideo-fitxategietara." msgid "Switch to 3MF model files." msgstr "Aldatu 3MF modelo-fitxategietara." msgid "Delete selected files from printer." msgstr "Ezabatu hautatutako elementuak inprimagailutik." msgid "Download" msgstr "Deskargatu" msgid "Download selected files from printer." msgstr "Deskargatu hautatutako fitxategiak inprimagailutik." msgid "Batch manage files." msgstr "Kudeatu fitxategiak multzoka." msgid "Reload file list from printer." msgstr "Birkargatu fitxategien zerrenda inprimagailutik." msgid "No printers." msgstr "Inprimagailurik ez." msgid "Loading file list..." msgstr "Fitxategien zerrenda kargatzen..." msgid "No files" msgstr "Ez dago fitxategirik" msgid "Load failed" msgstr "Kargatzeak huts egin du" msgid "Browsing file in storage is not supported in current firmware. Please update the printer firmware." msgstr "Uneko firmwareak ez du biltegiko fitxategiak arakatzea onartzen. Eguneratu inprimagailuaren firmwarea." msgid "LAN Connection Failed (Failed to view sdcard)" msgstr "LAN konexioak huts egin du (ezin izan da SD txartela ikusi)" msgid "Browsing file in storage is not supported in LAN Only Mode." msgstr "LAN bakarrik moduak ez du biltegiko fitxategiak arakatzea onartzen." #, c-format, boost-format msgid "You are going to delete %u file from printer. Are you sure to continue?" msgid_plural "You are going to delete %u files from printer. Are you sure to continue?" msgstr[0] "Inprimagailutik %u fitxategi ezabatuko duzu. Ziur jarraitu nahi duzula?" msgstr[1] "Inprimagailutik %u fitxategi ezabatuko dituzu. Ziur jarraitu nahi duzula?" msgid "Delete files" msgstr "Fitxategiak ezabatu" #, c-format, boost-format msgid "Do you want to delete the file '%s' from printer?" msgstr "'%s' fitxategia inprimagailutik ezabatu nahi duzu?" msgid "Delete file" msgstr "Fitxategia ezabatu" msgid "Fetching model information..." msgstr "Modeloaren informazioa eskuratzen..." msgid "Failed to fetch model information from printer." msgstr "Ezin izan da inprimagailutik modeloaren informazioa eskuratu." msgid "Failed to parse model information." msgstr "Ezin izan da modeloaren informazioa analizatu." msgid "The .gcode.3mf file contains no G-code data. Please slice it with Orca Slicer and export a new .gcode.3mf file." msgstr ".gcode.3mf fitxategiak ez du G-code daturik. Mesedez, xerratu OrcaSlicerrekin eta esportatu .gcode.3mf fitxategi berri bat." #, c-format, boost-format msgid "File '%s' was lost! Please download it again." msgstr "'%s' fitxategia galdu da! Deskargatu berriro." #, c-format, boost-format msgid "" "File: %s\n" "Title: %s\n" msgstr "" "Fitxategia: %s\n" "Izenburua: %s\n" msgid "Download waiting..." msgstr "Deskarga zain..." msgid "Play" msgstr "Erreproduzitu" msgid "Open Folder" msgstr "Ireki karpeta" msgid "Download finished" msgstr "Deskargak amaitu da" #, c-format, boost-format msgid "Downloading %d%%..." msgstr "%d%% deskargatzen..." msgid "Air Condition" msgstr "Airearen egoera" msgid "Reconnecting the printer, the operation cannot be completed immediately, please try again later." msgstr "Inprimagailua berriro konektatzen ari da; eragiketa ezin da berehala osatu. Saiatu berriro geroago." msgid "Timeout, please try again." msgstr "Denbora-muga gainditu da; saiatu berriro." msgid "File does not exist." msgstr "Fitxategia ez dago." msgid "File checksum error. Please retry." msgstr "Errorea fitxategiaren egiaztapen-baturan. Saiatu berriro." msgid "Not supported on the current printer version." msgstr "Ez da onartzen inprimagailuaren uneko bertsioan." msgid "" "Please check if the storage is inserted into the printer.\n" "If it still cannot be read, you can try formatting the storage." msgstr "" "Egiaztatu biltegiratze-gailua inprimagailuan sartuta dagoela.\n" "Oraindik ezin bada irakurri, saiatu biltegiratze-gailua formateatzen." msgid "The firmware version of the printer is too low. Please update the firmware and try again." msgstr "Inprimagailuaren firmware-bertsioa zaharregia da. Eguneratu firmwarea eta saiatu berriro." msgid "The file already exists, do you want to replace it?" msgstr "Fitxategia badago lehendik. Ordeztu nahi duzu?" msgid "Insufficient storage space, please clear the space and try again." msgstr "Ez dago biltegiratze-leku nahikorik; askatu lekua eta saiatu berriro." msgid "File creation failed, please try again." msgstr "Ezin izan da fitxategia sortu; saiatu berriro." msgid "File write failed, please try again." msgstr "Ezin izan da fitxategian idatzi; saiatu berriro." msgid "MD5 verification failed, please try again." msgstr "MD5 egiaztapenak huts egin du; saiatu berriro." msgid "File renaming failed, please try again." msgstr "Ezin izan da fitxategiaren izena aldatu; saiatu berriro." msgid "File upload failed, please try again." msgstr "Ezin izan da fitxategia igo; saiatu berriro." #, c-format, boost-format msgid "Error code: %d" msgstr "Errore kodea: %d" msgid "User cancels task." msgstr "Erabiltzaileak zeregina bertan behera utzi du." msgid "Failed to read file, please try again." msgstr "Ezin izan da fitxategia irakurri; saiatu berriro." msgid "Speed:" msgstr "Abiadura:" msgid "Deadzone:" msgstr "Eremu hila:" msgid "Options:" msgstr "Bidalketa aukerak:" msgid "Zoom" msgstr "Zooma" msgid "Translation/Zoom" msgstr "Translazioa/zoom-a" msgid "3Dconnexion settings" msgstr "3Dconnexion ezarpenak" msgid "Swap Y/Z axes" msgstr "Trukatu Y/Z ardatzak" msgid "Invert X axis" msgstr "Alderantzikatu X ardatza" msgid "Invert Y axis" msgstr "Alderantzikatu Y ardatza" msgid "Invert Z axis" msgstr "Alderantzikatu Z ardatza" msgid "Invert Yaw axis" msgstr "Alderantzikatu keinada-ardatza" msgid "Invert Pitch axis" msgstr "Alderantzikatu inklinazio-ardatza" msgid "Invert Roll axis" msgstr "Alderantzikatu biraketa-ardatza" msgid "(LAN)" msgstr "(LAN)" msgid "Search" msgstr "Bilatu" msgid "My Device" msgstr "Nire gailua" msgid "Other Device" msgstr "Beste gailu bat" msgid "Online" msgstr "Linean" msgid "Input access code" msgstr "Sartu sarbide-kodea" msgid "Can't find devices?" msgstr "Ez dituzu gailuak aurkitzen?" msgid "Log out successful." msgstr "Saioa behar bezala amaitu da." msgid "Offline" msgstr "Lineaz kanpo" msgid "Busy" msgstr "Lanpetuta" msgid "Modifying the device name" msgstr "Gailuaren izena aldatzen" msgid "Name is invalid;" msgstr "Izena ez da baliozkoa;" msgid "illegal characters:" msgstr "balio ez duten karaktereak:" msgid "illegal suffix:" msgstr "balio ez duten atzizkiak:" msgid "The name field is not allowed to be empty." msgstr "Izenaren eremua ezin da hutsik egon." msgid "The name is not allowed to start with a space." msgstr "Izena ezin da zuriune batekin hasi." msgid "The name is not allowed to end with a space." msgstr "Izena ezin da zuriune batekin amaitu." msgid "The name is not allowed to exceed 32 characters." msgstr "Izenak ezin ditu 32 karaktere baino gehiago izan." msgid "Bind with Pin Code" msgstr "Lotu PIN kodearekin" msgid "Bind with Access Code" msgstr "Lotu sarbide-kodearekin" msgctxt "Quit_Switching" msgid "Quit" msgstr "Irten" msgid "Switching..." msgstr "Aldatzen..." msgid "Switching failed" msgstr "Aldaketak huts egin du" msgid "Printing progress" msgstr "Inprimatze-aurrerapena" msgid "Parts Skip" msgstr "Piezen saltoa" msgid "Stop" msgstr "Gelditu" msgid "Layer: N/A" msgstr "Geruza: N/A" msgid "Click to view thermal preconditioning explanation" msgstr "Egin klik aurrebaldintzatze termikoaren azalpena ikusteko" msgid "Clear" msgstr "Garbitu" msgid "" "You have completed printing the mall model, \n" "but synchronizing rating information has failed." msgstr "" "Mall modeloa inprimatzen amaitu duzu, \n" "baina balorazio-informazioaren sinkronizazioak huts egin du." msgid "How do you like this printing file?" msgstr "Zer iruditzen zaizu inprimatze-fitxategi hau?" msgid "(The model has already been rated. Your rating will overwrite the previous rating.)" msgstr "(Modeloa dagoeneko baloratuta dago. Zure balorazioak aurrekoa gainidatziko du.)" msgid "Rate" msgstr "Baloratu" msgid "Camera" msgstr "Kamera" msgid "Storage" msgstr "Biltegiratze-gailua" msgid "Camera Setting" msgstr "Kameraren ezarpenak" msgid "Switch Camera View" msgstr "Aldatu kameraren ikuspegia" msgid "Control" msgstr "Kontrola" msgid "Printer Parts" msgstr "Inprimagailuaren piezak" msgid "Print Options" msgstr "Inprimatze-aukerak" msgid "Safety Options" msgstr "Segurtasun-aukerak" msgid "Hotends" msgstr "Hotendak" msgid "Lamp" msgstr "Lanpara" msgid "Bed" msgstr "Ohea" msgid "Debug Info" msgstr "Arazketa-informazioa" msgid "Filament loading..." msgstr "Filamentua kargatzen..." msgid "No Storage" msgstr "Biltegiratze-gailurik ez" msgid "Storage Abnormal" msgstr "Biltegiratze-gailuko anomalia" msgid "Cancel print" msgstr "Inprimaketa bertan behera utzi" msgid "Are you sure you want to stop this print?" msgstr "Ziur zaude inprimaketa hau gelditu nahi duzula?" msgid "The printer is busy with another print job." msgstr "Inprimagailua beste inprimaketa-lan batekin okupatuta dago." msgid "When printing is paused, filament loading and unloading are only supported for external slots." msgstr "Inprimatzea pausatuta dagoenean, filamentua kargatzea eta deskargatzea kanpoko zirrikituetan baino ez da onartzen." msgid "Current extruder is busy changing filament." msgstr "Uneko estrusorea filamentua aldatzen ari da." msgid "\"Load\" or \"Unload\" is not supported for external spool while using Filament Track Switch." msgstr "Kanpoko bobinarako ez dira onartzen \"Kargatu\" edo \"Deskargatu\" aukerak Filament Track Switch erabiltzean." msgid "The Filament Track Switch has not been setup. Please setup on printer." msgstr "Filament Track Switch ez dago konfiguratuta. Konfiguratu inprimagailuan." msgid "Current slot has already been loaded." msgstr "Uneko erretena dagoeneko kargatuta dago." msgid "The selected slot is empty." msgstr "Hautatutako erretena hutsik dago." msgid "Printer 2D mode does not support 3D calibration" msgstr "Inprimagailuaren 2D moduak ez du 3D kalibrazioa onartzen" msgid "Downloading..." msgstr "Deskargatzen..." msgid "Cloud Slicing..." msgstr "Hodeian xerratzen..." #, c-format, boost-format msgid "In Cloud Slicing Queue, there are %s tasks ahead of you." msgstr "Hodeian xerratzeko ilaran, %s zeregin dituzu aurretik." #, c-format, boost-format msgid "Layer: %s" msgstr "Geruza: %s" #, c-format, boost-format msgid "Layer: %d/%d" msgstr "Geruza: %d/%d" msgid "Please heat the nozzle to above 170℃ before loading or unloading filament." msgstr "Berotu pita 170 ℃-tik gora filamentua kargatu edo deskargatu aurretik." msgid "Chamber temperature cannot be changed in cooling mode while printing." msgstr "Ganberako tenperatura ezin da aldatu hozte moduan inprimatzen ari den bitartean." msgid "If the chamber temperature exceeds 40℃, the system will automatically switch to heating mode. Please confirm whether to switch." msgstr "Ganberako tenperaturak 40 ℃ gainditzen baditu, sistema automatikoki berotze modura aldatuko da. Berretsi aldaketa egin nahi duzun." msgid "Please select an AMS slot before calibration" msgstr "Hautatu AMS erreten bat kalibratu aurretik" msgid "Cannot read filament info: the filament is loaded to the tool head. Please unload the filament and try again." msgstr "Ezin da filamentuko informazioa irakurri: filamentua tresna-buruan kargatuta dago. Deskargatu filamentua eta saiatu berriro." msgid "This only takes effect during printing" msgstr "Honek inprimatzean bakarrik du eragina" msgid "Silent" msgstr "Isila" msgid "Sport" msgstr "Kirola" msgid "Ludicrous" msgstr "Muturrekoa" msgid "Turning off the lights during the task will cause the failure of AI monitoring, like spaghetti detection. Please choose carefully." msgstr "Zereginean argiak itzaltzeak AA bidezko monitorizazioak huts egitea eragingo du, adibidez, espagetiak hautemateak. Aukeratu kontu handiz." msgid "Keep it On" msgstr "Mantendu piztuta" msgid "Turn it Off" msgstr "Itzali" msgid "Can't start this without storage." msgstr "Ezin da hau abiarazi biltegiratze-gailurik gabe." msgid "Rate the Print Profile" msgstr "Baloratu inprimatze-profila" msgid "Comment" msgstr "Iruzkina" msgid "Rate this print" msgstr "Baloratu inprimaketa hau" msgid "Add Photo" msgstr "Argazkia gehitu" msgid "Delete Photo" msgstr "Argazkia ezabatu" msgid "Select Images" msgstr "Hautatu irudiak" msgid "Image files (*.png;*.jpg;*jpeg)|*.png;*.jpg;*.jpeg" msgstr "Irudi-fitxategiak (*.png;*.jpg;*jpeg)|*.png;*.jpg;*.jpeg" msgid "Submit" msgstr "Bidali" msgid "Please click on the star first." msgstr "Egin klik izarrean lehenik." msgid "Get oss config failed." msgstr "OSS konfigurazioa eskuratzeak huts egin du." msgid "Upload Pictures" msgstr "Igo irudiak" msgid "Number of images successfully uploaded" msgstr "Behar bezala igotako irudi kopurua" msgid " upload failed" msgstr " igotzeak huts egin du" msgid " upload config prase failed\n" msgstr " igoeraren konfigurazioa analizatzeak huts egin du\n" msgid " No corresponding storage bucket\n" msgstr " Ez dago dagokion biltegiratze-ontzirik\n" msgid " cannot be opened\n" msgstr " ezin da ireki\n" msgid "" "The following issues occurred during the process of uploading images. Do you want to ignore them?\n" "\n" msgstr "" "Arazo hauek gertatu dira irudiak igotzeko prozesuan. Ez ikusi egin nahi diezu?\n" "\n" msgid "info" msgstr "info" msgid "Synchronizing the printing results. Please retry a few seconds later." msgstr "Inprimatze-emaitzak sinkronizatzen. Saiatu berriro segundo batzuk barru." msgid "Upload failed\n" msgstr "Igoerak huts egin du\n" msgid "Obtaining instance_id failed\n" msgstr "instance_id eskuratzeak huts egin du\n" msgid "" "Your comment result cannot be uploaded due to the following reasons:\n" "\n" " error code: " msgstr "" "Zure iruzkinaren emaitza ezin da igo arrazoi hauengatik:\n" "\n" " errore-kodea: " msgid "error message: " msgstr "errore-mezua: " msgid "" "\n" "\n" "Would you like to redirect to the webpage to give a rating?" msgstr "" "\n" "\n" "Web orrira birbideratu nahi duzu balorazioa emateko?" msgid "Some of your images failed to upload. Would you like to redirect to the webpage to give a rating?" msgstr "Zure irudi batzuk ezin izan dira igo. Web orrira birbideratu nahi duzu balorazioa emateko?" msgid "You can select up to 16 images." msgstr "Gehienez 16 irudi hauta ditzakezu." msgid "" "At least one successful print record of this print profile is required \n" "to give a positive rating (4 or 5 stars)." msgstr "" "Inprimatze-profil honen gutxienez inprimatze-erregistro arrakastatsu bat behar da \n" "balorazio positiboa emateko (4 edo 5 izar)." msgid "click to add machine" msgstr "egin klik makina gehitzeko" msgid "Status" msgstr "Egoera" msgctxt "Firmware" msgid "Update" msgstr "Eguneratu" msgid "Assistant(HMS)" msgstr "Laguntzailea (HMS)" #, c-format, boost-format msgid "Network plug-in v%s" msgstr "Sareko plugina v%s" #, c-format, boost-format msgid "Network plug-in v%s (%s)" msgstr "Sareko plugina v%s (%s)" msgid "Don't show again" msgstr "Ez erakutsi berriro" msgid "Go to" msgstr "Joan hona" msgid "Later" msgstr "Geroago" #, c-format, boost-format msgid "%s error" msgstr "%s errorea" #, c-format, boost-format msgid "%s has encountered an error" msgstr "%s(e)k errore bat izan du" #, c-format, boost-format msgid "%s warning" msgstr "%s abisua" #, c-format, boost-format msgid "%s has a warning" msgstr "%s(e)k abisu bat du" #, c-format, boost-format msgid "%s info" msgstr "%s informazioa" #, c-format, boost-format msgid "%s information" msgstr "%s informazioa" msgid "Skip" msgstr "Jauzi egin" msgid "Newer 3MF version" msgstr "3MF bertsio berriagoa" msgid "The 3MF file version is in Beta and it is newer than the current OrcaSlicer version." msgstr "3MF fitxategiaren bertsioa beta da, eta uneko OrcaSlicer bertsioa baino berriagoa." msgid "If you would like to try Orca Slicer Beta, you may click to" msgstr "OrcaSlicer Beta probatu nahi baduzu, egin klik hemen:" msgid "Download Beta Version" msgstr "Beta Bertsioa Deskargatu" msgid "The 3MF file version is newer than the current OrcaSlicer version." msgstr "3MF fitxategiaren bertsioa uneko OrcaSlicer bertsioa baino berriagoa da." msgid "Updating your OrcaSlicer could enable all functionality in the 3MF file." msgstr "OrcaSlicer eguneratuz gero, 3MF fitxategiko funtzio guztiak gaitu ahal izango lirateke." msgid "Current Version: " msgstr "Uneko Bertsioa: " msgid "Latest Version: " msgstr "Azken Bertsioa: " msgctxt "Software" msgid "Update" msgstr "Eguneratu" msgid "Not for now" msgstr "Oraingoz ez" msgid "Server Exception" msgstr "Zerbitzariaren salbuespena" msgid "The server is unable to respond. Please click the link below to check the server status." msgstr "Zerbitzariak ezin du erantzun. Egin klik beheko estekan zerbitzariaren egoera egiaztatzeko." msgid "If the server is in a fault state, you can temporarily use offline printing or local network printing." msgstr "Zerbitzaria akats-egoeran badago, aldi baterako lineaz kanpoko inprimaketa edo sare lokaleko inprimaketa erabil dezakezu." msgid "How to use LAN only mode" msgstr "Nola erabili LAN soilik modua" msgid "Don't show this dialog again" msgstr "Ez erakutsi elkarrizketa-koadro hau berriro" msgid "Please refer to Wiki before use->" msgstr "Kontsultatu Wikia erabili aurretik ->" msgid "3D Mouse disconnected." msgstr "3D Sagua deskonektatuta." msgid "A new configuration is available. Update now?" msgstr "Konfigurazio berri bat eskuragarri dago. Eguneratu orain?" msgid "Integration was successful." msgstr "Integrazioa behar bezala egin da." msgid "Integration failed." msgstr "Integrazioak huts egin du." msgid "Undo integration was successful." msgstr "Integrazioa desegitea behar bezala egin da." msgid "New network plug-in available." msgstr "Sareko plug-in berria erabilgarri dago." msgid "Details" msgstr "Xehetasunak" msgid "New printer config available." msgstr "Inprimagailuaren konfigurazio berria erabilgarri dago." msgid "Undo integration failed." msgstr "Integrazioa desegiteak huts egin du." msgid "Exporting" msgstr "Esportatzen" msgid "An update is available!" msgstr "Eguneratze bat eskuragarri dago!" msgid "Go to download page" msgstr "Joan deskarga orrira" msgid "Open Folder." msgstr "Ireki Karpeta." msgid "Safely remove hardware." msgstr "Kendu hardwarea segurtasunez." #, c-format, boost-format msgid "%1$d Object has custom supports." msgid_plural "%1$d Objects have custom supports." msgstr[0] "%1$d objektuk euskarri pertsonalizatuak ditu." msgstr[1] "%1$d objektuk euskarri pertsonalizatuak dituzte." #, c-format, boost-format msgid "%1$d Object has color painting." msgid_plural "%1$d Objects have color painting." msgstr[0] "%1$d objektuk kolore-pintaketa du." msgstr[1] "%1$d objektuk kolore-pintaketa dute." #, c-format, boost-format msgid "%1$d object was loaded as a part of cut object." msgid_plural "%1$d objects were loaded as parts of cut object." msgstr[0] "%1$d objektua ebakitako objektuaren zati gisa kargatu da." msgstr[1] "%1$d objektu ebakitako objektuaren zati gisa kargatu dira." #, c-format, boost-format msgid "%1$d object was loaded with fuzzy skin painting." msgid_plural "%1$d objects were loaded with fuzzy skin painting." msgstr[0] "%1$d objektu kargatu da gainazal zimurraren margoketarekin." msgstr[1] "%1$d objektu kargatu dira gainazal zimurraren margoketarekin." msgid "ERROR" msgstr "ERROREA" msgid "COMPLETED" msgstr "OSATUTA" msgid "CANCELED" msgstr "BERTAN BEHERA UTZITA" msgid "Cancel upload" msgstr "Utzi igoera bertan behera" msgid "Jump to" msgstr "Hona jauzi egin:" msgid "Error:" msgstr "Errorea:" msgid "Warning:" msgstr "Abisua:" msgid "Exported successfully" msgstr "Behar bezala esportatu da" msgid "Model file downloaded." msgstr "Modelo-fitxategia deskargatu da." msgid "Pull" msgstr "Eskuratu" msgid "Force push" msgstr "Behartu bidalketa" msgid "Shared profiles may be available for this printer." msgstr "Baliteke inprimagailu honetarako partekatutako profilak eskuragarri egotea." msgid "Browse shared profiles" msgstr "Arakatu partekatutako profilak" msgid "Serious warning:" msgstr "Abisu larria:" msgid " (Repair)" msgstr " (Konpondu)" msgid " Click here to install it." msgstr " Egin klik hemen instalatzeko." msgid "WARNING:" msgstr "ABISUA:" msgid "Your model needs support! Please enable support material." msgstr "Zure modeloak euskarriak behar ditu! Gaitu euskarri-materiala, mesedez." msgid "G-code path overlap" msgstr "G-code ibilbideen gainjartzea" msgid "Cut connectors" msgstr "Ebaki konektoreak" msgid "Layers" msgstr "Geruzak" msgid "The application cannot run normally because OpenGL version is lower than 3.2.\n" msgstr "Aplikazioa ezin da behar bezala exekutatu OpenGL bertsioa 3.2 baino zaharragoa delako.\n" msgid "Please upgrade your graphics card driver." msgstr "Eguneratu txartel grafikoaren kontrolatzailea." msgid "Unsupported OpenGL version" msgstr "OpenGL bertsio ez-onartua" #, c-format, boost-format msgid "" "Unable to load shaders:\n" "%s" msgstr "" "Ezin izan dira itzaldurak kargatu:\n" "%s" msgid "Error loading shaders" msgstr "Errorea itzaldurak kargatzean" msgctxt "Layers" msgid "Top" msgstr "Goia" msgctxt "Layers" msgid "Bottom" msgstr "Behea" msgid "Plugin Selection" msgstr "Plugin-hautaketa" msgid "" "No plugins capabilities available for this type.\n" "Enable or install some to use." msgstr "" "Mota honetarako ez dago plugin-gaitasunik eskuragarri.\n" "Gaitu edo instalatu batzuk erabiltzeko." # AI Translated msgid "There is stringing-prone filament in the current print job. Enabling nozzle clumping detection now may degrade print quality. Are you sure you want to enable it?" msgstr "Uneko inprimatze-lanean harilkatzeko joera duen filamentua dago. Pitako material-metaketaren detekzioa orain gaitzeak inprimatze-kalitatea okertu dezake. Ziur zaude gaitu nahi duzula?" # AI Translated msgid "Enable Nozzle Clumping Detection" msgstr "Gaitu pitako material-metaketaren detekzioa" # AI Translated msgid "When enabled, the printer will automatically capture photos of printed parts and upload them to the cloud. Would you like to enable this option?" msgstr "Gaituta dagoenean, inprimagailuak inprimatutako piezen argazkiak automatikoki hartuko ditu eta hodeira igoko ditu. Aukera hau gaitu nahi duzu?" # AI Translated msgid "Confirm Enable Print Status Snapshot" msgstr "Berretsi Inprimatze-egoeraren argazkia gaitzea" msgid "Enable detection of build plate position" msgstr "Gaitu inprimatze-plakaren posizioaren detekzioa" msgid "The localization tag of the build plate will be detected, and printing will be paused if the tag is not in predefined range." msgstr "Inprimatze-plakaren kokapen-etiketa detektatuko da, eta inprimaketa pausatu egingo da etiketa aurrez zehaztutako barrutian ez badago." msgid "Build Plate Detection" msgstr "Inprimatze-plakaren detekzioa" msgid "Identifies the type and position of the build plate on the heatbed. Pausing printing if a mismatch is detected." msgstr "Inprimatze-plakaren mota eta posizioa identifikatzen ditu ohe beroan. Bat ez badatoz, inprimatzea pausatzen du." # AI Translated msgid "Purifies the chamber air as the print finishes, based on the selected mode." msgstr "Ganberako airea arazten du inprimaketa amaitzean, hautatutako moduaren arabera." # AI Translated msgid "Purifies the chamber air through internal circulation as each print finishes." msgstr "Ganberako airea arazten du barne-zirkulazioaren bidez inprimaketa bakoitza amaitzean." # AI Translated msgid "Automatically match the corresponding switch strategy for leak-prone filaments (disable blob detection) and regular filaments (enable blob detection)." msgstr "Automatikoki egokitu dagokion aldaketa-estrategia jariotzeko joera duten filamentuentzat (desgaitu material-metaketaren detekzioa) eta filamentu arruntentzat (gaitu material-metaketaren detekzioa)." # AI Translated msgid "Detect whether the nozzle is wrapped by filament or other foreign matter." msgstr "Detektatu pita filamentuz edo beste material arrotzez inguratuta dagoen." # AI Translated msgid "After disabling, nozzle wrapping cannot be detected, which may lead to print failure or nozzle damage." msgstr "Desgaitu ondoren, ezin izango da pitaren inguraketa detektatu, eta horrek inprimaketa-hutsegitea edo pitaren kaltea eragin dezake." msgid "AI Detections" msgstr "AA bidezko detekzioak" msgid "Printer will send assistant message or pause printing if any of the following problem is detected." msgstr "Inprimagailuak laguntza-mezu bat bidaliko du edo inprimatzea pausatuko du arazo hauetakoren bat hautematen bada." msgid "Enable AI monitoring of printing" msgstr "Gaitu inprimaketaren IA bidezko monitorizazioa" msgid "Pausing Sensitivity:" msgstr "Pausatze-sentikortasuna:" msgid "Spaghetti Detection" msgstr "Espageti-detektatzea" msgid "Detect spaghetti failures (scattered lose filament)." msgstr "Hauteman espageti-akatsak (sakabanatutako filamentua solte)." msgid "Purge Chute Pile-Up Detection" msgstr "Purgatze-kanaleko pilaketa hautematea" msgid "Monitor if the waste is piled up in the purge chute." msgstr "Kontrolatu hondakinak purgatze-kanalean pilatzen diren." msgid "Nozzle Clumping Detection" msgstr "Pitan metatutako filamentua detektatzea" msgid "Check if the nozzle is clumping by filaments or other foreign objects." msgstr "Egiaztatu pita filamentuz edo beste objektu arrotzez buxatuta dagoen." msgid "Detects air printing caused by nozzle clogging or filament grinding." msgstr "Pita buxatzeak edo filamentua higatzeak eragindako aireko inprimatzea hautematen du." msgid "First Layer Inspection" msgstr "Lehen geruzaren ikuskapena" msgid "Auto-recover from step loss" msgstr "Berreskuratu automatikoki urrats-galeratik" msgid "Store Sent Files on External Storage" msgstr "Gorde bidalitako fitxategiak kanpoko biltegiratze-gailuan" # AI Translated msgid "Save the printing files sent from the slicer and other apps on External Storage" msgstr "Gorde xerratzailetik eta beste aplikazioetatik bidalitako inprimatze-fitxategiak kanpoko biltegiratze-gailuan" msgid "Allow Prompt Sound" msgstr "Baimendu abisu-soinua" msgid "Filament Tangle Detection" msgstr "Filamentu-korapiloen detekzioa" msgid "Check if the nozzle is clumping by filament or other foreign objects." msgstr "Egiaztatu pita filamentuz edo bestelako objektu arrotzez trabatuta dagoen." # AI Translated msgid "Purify Air at Print End" msgstr "Araztu airea inprimaketaren amaieran" # AI Translated msgid "Internal Circulation" msgstr "Barne-zirkulazioa" # AI Translated msgid "Alignment Detection" msgstr "Lerrokatze-detekzioa" # AI Translated msgid "Pauses printing when build plate misalignment is detected." msgstr "Inprimaketa pausatzen du inprimatze-plakaren deslerrokatzea detektatzen denean." # AI Translated msgid "Foreign Object Detection" msgstr "Objektu arrotzen detekzioa" # AI Translated msgid "Checks for any objects on the build plate at the start of a print to avoid collisions." msgstr "Inprimaketaren hasieran inprimatze-plakan objekturik dagoen egiaztatzen du talkak saihesteko." # AI Translated msgid "Printed Part Displacement Detection" msgstr "Inprimatutako piezaren desplazamenduaren detekzioa" # AI Translated msgid "Monitors the printed part during printing and alerts immediately if it shifts or collapses." msgstr "Inprimatutako pieza gainbegiratzen du inprimatzen ari den bitartean eta berehala ohartarazten du desplazatzen edo erortzen bada." # AI Translated msgid "Checks if the nozzle is clumping by filament or other foreign objects." msgstr "Egiaztatzen du pitan filamentua edo beste objektu arrotzik metatzen ari den." msgid "On" msgstr "Aktibatuta" msgid "Open Door Detection" msgstr "Ate irekiaren detekzioa" msgid "Notification" msgstr "Jakinarazpena" msgid "Pause printing" msgstr "Pausatu inprimaketa" # AI Translated msgid "Print Status Snapshot" msgstr "Inprimatze-egoeraren argazkia" # AI Translated msgid "Automatically capture and upload print photos, showing defects during printing and the final result for remote viewing." msgstr "Automatikoki hartu eta igo inprimaketaren argazkiak, inprimatzean sortzen diren akatsak eta azken emaitza urrunetik ikusteko." msgctxt "Nozzle Type" msgid "Type" msgstr "Mota" msgctxt "Nozzle Diameter" msgid "Diameter" msgstr "Diametroa" msgctxt "Nozzle Flow" msgid "Flow" msgstr "Fluxua" msgid "Please change the nozzle settings on the printer." msgstr "Aldatu pitaren ezarpenak inprimagailuan." msgid "Brass" msgstr "Letoia" msgid "High flow" msgstr "Fluxu handia" msgid "TPU High flow" msgstr "Fluxu handiko TPUa" msgid "No wiki link available for this printer." msgstr "Ez dago Wiki estekarik inprimagailu honetarako." msgid "Unavailable while heating maintenance function is on." msgstr "Ez dago erabilgarri berotze-mantentze funtzioa aktibatuta dagoen bitartean." msgid "Idle Heating Protection" msgstr "Inaktibitateko berotze-babesa" msgid "Stops heating automatically after 5 mins of idle to ensure safety." msgstr "Segurtasuna bermatzeko, berotzea automatikoki gelditzen da 5 minutuz jarduerarik ez badago." msgid "Global" msgstr "Globala" msgid "Objects" msgstr "Objektuak" msgid "Cycle settings visibility" msgstr "Ezarpenen ikusgarritasuna txandakatu" msgid "Compare presets" msgstr "Konparatu aurrezarpenak" msgid "View all object's settings" msgstr "Ikusi objektuaren ezarpen guztiak" msgid "Material settings" msgstr "Materialaren ezarpenak" msgid "Remove current plate (if not last one)" msgstr "Kendu uneko plaka (azkena ez bada)" msgid "Auto orient objects on current plate" msgstr "Orientatu automatikoki objektuak uneko plakan" msgid "Arrange objects on current plate" msgstr "Antolatu objektuak uneko plakan" msgid "Unlock current plate" msgstr "Desblokeatu uneko plaka" msgid "Lock current plate" msgstr "Blokeatu uneko plaka" msgid "Filament grouping" msgstr "Filamentuen taldekatzea" msgid "Edit current plate name" msgstr "Editatu uneko plakaren izena" msgid "Move plate to the front" msgstr "Eraman plaka aurrealdera" msgid "Customize current plate" msgstr "Pertsonalizatu uneko plaka" #, c-format, boost-format msgid "The %s nozzle can not print %s." msgstr "%s pitak ezin du %s inprimatu." #, boost-format msgid "Mixing %1% with %2% in printing is not recommended.\n" msgstr "Ez da gomendatzen inprimatzean %1% eta %2% nahastea.\n" msgid " nozzle" msgstr " pita" #, boost-format msgid "It is not recommended to print the following filament(s) with %1%: %2%\n" msgstr "Ez da gomendatzen filamentu hauek %1% erabiliz inprimatzea: %2%\n" msgid "It is not recommended to use the following nozzle and filament combinations:\n" msgstr "Ez da gomendatzen pita eta filamentu konbinazio hauek erabiltzea:\n" #, boost-format msgid "%1% with %2%\n" msgstr "%1%, %2% erabiliz\n" #, boost-format msgid " plate %1%:" msgstr " %1% plaka:" msgid "Invalid name, the following characters are not allowed:" msgstr "Izen baliogabea; karaktere hauek ez dira onartzen:" msgid "Sliced Info" msgstr "Xerraketari buruzko informazioa" msgid "Used Filament (m)" msgstr "Erabilitako Filamentua (m)" msgid "Used Filament (mm³)" msgstr "Erabilitako Filamentua (mm³)" msgid "Used Filament (g)" msgstr "Erabilitako Filamentua (g)" msgid "Used Materials" msgstr "Erabilitako Materialak" msgid "Estimated time" msgstr "Estimatutako denbora" msgid "Set the number of AMS installed on the nozzle." msgstr "Ezarri pitan instalatutako AMS kopurua." msgid "AMS(4 slots)" msgstr "AMS (4 erreten)" msgid "AMS(1 slot)" msgstr "AMS (zirrikitu 1)" msgid "Not installed" msgstr "Instalatu gabe" msgid "The software does not support using different diameter of nozzles for one print. If the left and right nozzles are inconsistent, we can only proceed with single-head printing. Please confirm which nozzle you would like to use for this project." msgstr "Softwareak ez du onartzen inprimatze berean diametro desberdineko pitak erabiltzea. Ezkerreko eta eskuineko pitak desberdinak badira, buru bakarreko inprimatzea baino ezin da egin. Berretsi zein pita erabili nahi duzun proiektu honetan." msgid "Switch diameter" msgstr "Aldatu diametroa" msgid "Configuration incompatible" msgstr "Konfigurazio bateraezina" msgid "Filament switcher detected. All AMS filaments are now available for both extruders. The slicer will auto-assign for optimal printing." msgstr "Filamentu-aldagailua hauteman da. AMSko filamentu guztiak bi estrusoreetarako daude erabilgarri. Xerratzaileak automatikoki esleituko ditu inprimatzea optimizatzeko." msgid "A filament switcher is detected but not calibrated and thus currently unavailable. Please calibrate it on the printer and synchronize before use." msgstr "Filamentu-aldagailu bat hauteman da, baina ez dago kalibratuta eta, beraz, ez dago erabilgarri. Kalibratu inprimagailuan eta sinkronizatu erabili aurretik." msgid "Tips" msgstr "Aholkuak" msgid "Sync printer information" msgstr "Sinkronizatu inprimagailuaren informazioa" msgid "" "The currently selected machine preset is inconsistent with the connected printer type.\n" "Are you sure to continue syncing?" msgstr "" "Une honetan hautatutako makinaren aurrezarpena ez dator bat konektatutako inprimagailu motarekin.\n" "Ziur zaude sinkronizatzen jarraitu nahi duzula?" msgid "There are unset nozzle types. Please set the nozzle types of all extruders before synchronizing." msgstr "Pita mota batzuk ez daude ezarrita. Ezarri estrusore guztien pita motak sinkronizatu aurretik." msgid "Sync extruder infomation" msgstr "Sinkronizatu estrusorearen informazioa" msgid "Connection" msgstr "Konexioa" msgid "Synchronize nozzle information and the number of AMS" msgstr "Sinkronizatu pitaren informazioa eta AMS kopurua" msgid "Click to edit preset" msgstr "Egin klik aurrezarpena editatzeko" msgid "Nozzle" msgstr "Pita" msgid "Project Filaments" msgstr "Proiektuko filamentuak" msgid "Purge mode" msgstr "Purgatze-modua" msgid "Flushing volumes" msgstr "Purgatze-bolumenak" msgid "Add one filament" msgstr "Gehitu filamentu bat" msgid "Remove last filament" msgstr "Kendu azken filamentua" msgid "Synchronize filament list from AMS" msgstr "Sinkronizatu filamentuen zerrenda AMSarekin" msgid "Set filaments to use" msgstr "Ezarri erabili beharreko filamentuak" msgid "Search plate, object and part." msgstr "Bilatu plaka, objektua eta pieza." msgid "Pellets" msgstr "Pelletak" #, c-format, boost-format msgid "After completing your operation, %s project will be closed and create a new project." msgstr "Eragiketa amaitzean, %s proiektua itxi eta proiektu berri bat sortuko da." msgid "There are no compatible filaments, and sync is not performed." msgstr "Ez dago filamentu bateragarririk, eta sinkronizazioa ez da egin." msgid "Sync filaments with AMS" msgstr "Sinkronizatu filamentuak AMSarekin" msgid "" "There are some unknown or incompatible filaments mapped to generic preset.\n" "Please update Orca Slicer or restart Orca Slicer to check if there is an update to system presets." msgstr "" "Filamentu ezezagun edo bateraezin batzuk aurrezarpen generikoei esleituta daude.\n" "Eguneratu OrcaSlicer edo berrabiarazi, sistemako aurrezarpenetarako eguneratzerik dagoen egiaztatzeko." msgid "Only filament color information has been synchronized from printer." msgstr "Inprimagailutik filamentuen koloreari buruzko informazioa bakarrik sinkronizatu da." msgid "Filament type and color information have been synchronized, but slot information is not included." msgstr "Filamentu motari eta koloreari buruzko informazioa sinkronizatu da, baina zirrikituen informazioa ez da sartu." #, boost-format msgid "Do you want to save changes to \"%1%\"?" msgstr "\"%1%\"(e)n egindako aldaketak gorde nahi dituzu?" #, c-format, boost-format msgid "Successfully unmounted. The device %s (%s) can now be safely removed from the computer." msgstr "Behar bezala desmuntatu da. %s (%s) gailua segurtasunez ken daiteke ordenagailutik." #, c-format, boost-format msgid "Ejecting of device %s (%s) has failed." msgstr "%s (%s) gailua egozteak huts egin du." msgid "Previously unsaved items have been detected. Do you want to restore them?" msgstr "Aurretik gorde gabeko elementuak detektatu dira. Leheneratu nahi dituzu?" msgid "Restore" msgstr "Berrezarri" msgid "The current heatbed temperature is relatively high. The nozzle may clog when printing this filament in a closed environment. Please open the front door and/or remove the upper glass." msgstr "Ohe beroaren uneko tenperatura nahiko altua da. Baliteke pita buxatzea filamentua ingurune itxian inprimatzean. Ireki aurreko atea eta/edo kendu goiko beira." msgid "The nozzle hardness required by the filament is higher than the default nozzle hardness of the printer. Please replace the hardened nozzle or filament, otherwise, the nozzle will be worn down or damaged." msgstr "Filamentuak eskatzen duen pitaren gogortasuna inprimagailuaren pita lehenetsiaren gogortasuna baino handiagoa da. Ordeztu pita gogortu batekin edo aldatu filamentua; bestela, pita higatu edo hondatu egingo da." msgid "Enabling traditional timelapse photography may cause surface imperfections. It is recommended to change to smooth mode." msgstr "Timelapse tradizionala gaitzeak gainazaleko akatsak sor ditzake. Modu leunera aldatzea gomendatzen da." msgid "Smooth mode for timelapse is enabled, but the prime tower is off, which may cause print defects. Please enable the prime tower, re-slice and print again." msgstr "Timelapserako modu leuna gaituta dago, baina purgatze-dorrea desaktibatuta dago; horrek inprimatze-akatsak eragin ditzake. Gaitu purgatze-dorrea, xerratu berriro eta inprimatu berriro." msgid "Expand sidebar" msgstr "Zabaldu alboko barra" msgid "Collapse sidebar" msgstr "Tolestu alboko barra" msgid "Tab" msgstr "Fitxa" #, c-format, boost-format msgid "Loading file: %s" msgstr "%s fitxategia kargatzen" msgid "Load 3MF" msgstr "Kargatu 3MF" msgid "BambuStudio Project" msgstr "BambuStudio proiektua" msgid "The 3MF is not supported by OrcaSlicer, loading geometry data only." msgstr "3MF-a ez du OrcaSlicerrek onartzen; geometriaren datuak bakarrik kargatzen." msgid "The 3MF file was generated by an old OrcaSlicer version, loading geometry data only." msgstr "3MF fitxategia OrcaSlicer-en bertsio zahar batek sortu zuen, geometriaren datuak bakarrik kargatzen." msgid "The 3MF file was generated by an older version, loading geometry data only." msgstr "3MF fitxategia OrcaSlicer-en bertsio zaharrago batek sortu zuen, geometriaren datuak bakarrik kargatzen." msgid "The 3MF file was generated by BambuStudio, loading geometry data only." msgstr "3MF fitxategia BambuStudio bidez sortu zen, geometriaren datuak bakarrik kargatzen." # AI Translated msgid "This project was created with an OrcaSlicer 2.3.1-alpha and uses infill rotation template settings that may not work properly with your current infill pattern. This could result in weak support or print quality issues." msgstr "Proiektu hau OrcaSlicer 2.3.1-alpha bertsioarekin sortu zen, eta baliteke betegarriaren biraketa-txantiloiaren ezarpenek zure uneko betegarri-patroiarekin behar bezala ez funtzionatzea. Horrek euskarri ahulak edo inprimatze-kalitateko arazoak eragin ditzake." msgid "Would you like OrcaSlicer to automatically fix this by clearing the rotation template settings?" msgstr "OrcaSlicerrek arazoa automatikoki konpontzea nahi duzu, biraketa-txantiloiaren ezarpenak garbituz?" #, c-format, boost-format msgid "The 3MF file version %s is newer than %s's version %s, found the following unrecognized keys:" msgstr "3MF fitxategiaren %s bertsioa %s-ren %s bertsioa baino berriagoa da; ezagutzen ez diren gako hauek aurkitu dira:" msgid "You should update your software.\n" msgstr "Softwarea eguneratu beharko zenuke.\n" #, c-format, boost-format msgid "The 3MF file version %s is newer than %s's version %s, we suggest to upgrade your software." msgstr "3MF-aren %s bertsioa %s-ren %s bertsioa baino berriagoa da; softwarea eguneratzea gomendatzen da." #, c-format, boost-format msgid "The 3MF was created by BambuStudio (version %s), which is newer than the compatible version %s. Found unrecognized settings:" msgstr "3MF fitxategia BambuStudio bidez sortu zen (%s bertsioa), bertsio hori bateragarria den %s bertsioa baino berriagoa da. Ezagutzen ez diren ezarpenak aurkitu dira:" #, c-format, boost-format msgid "The 3MF was created by BambuStudio (version %s), which is newer than the compatible version %s. Some settings may not be fully compatible." msgstr "3MF fitxategia BambuStudioren %s bertsioarekin sortu da, eta hori %s bertsio bateragarria baino berriagoa da. Baliteke ezarpen batzuk guztiz bateragarriak ez izatea." msgid "The 3MF was created by BambuStudio. Some settings may differ from OrcaSlicer." msgstr "3MF fitxategia BambuStudio erabiliz sortu da. Baliteke ezarpen batzuk OrcaSlicerrekoen desberdinak izatea." msgid "Invalid values found in the 3MF:" msgstr "Balio baliogabeak aurkitu dira 3MF fitxategian:" msgid "Please correct them in the Param tabs" msgstr "Zuzendu Parametroen fitxetan" msgid "The 3MF has the following modified G-code in filament or printer presets:" msgstr "3MF fitxategiak aldatutako G-code hau dauka filamentuen edo inprimagailuaren aurrezarpenetan:" msgid "Please confirm that all modified G-code is safe to prevent any damage to the machine!" msgstr "Berretsi aldatutako G-code guztia segurua dela, makinari kalterik ez eragiteko!" msgid "Modified G-code" msgstr "Aldatutako G-codea" msgid "The 3MF has the following customized filament or printer presets:" msgstr "3MF fitxategiak pertsonalizatutako filamentuen edo inprimagailuaren aurrezarpen hauek dauzka:" msgid "Please confirm that the G-code within these presets is safe to prevent any damage to the machine!" msgstr "Berretsi aurrezarpen hauetako G-codea segurua dela, makinari kalterik ez eragiteko!" msgid "Customized Preset" msgstr "Aurrezarpen pertsonalizatua" msgid "Component name(s) inside step file not in UTF8 format!" msgstr "STEP fitxategiko osagai-izena(k) ez dago/daude UTF-8 formatuan!" msgid "Because of unsupported text encoding, garbage characters may appear!" msgstr "Onartzen ez den testu-kodetze baten ondorioz, karaktere ulertezinak ager daitezke!" msgid "Remember my choice." msgstr "Gogoratu nire aukera." #, boost-format msgid "Failed loading file \"%1%\". An invalid configuration was found." msgstr "Huts egin du \"%1%\" fitxategia kargatzean. Konfigurazio baliogabea aurkitu da." msgid "Objects with zero volume removed" msgstr "Zero bolumeneko objektuak kendu dira" msgid "The volume of the object is zero" msgstr "Objektuaren bolumena zero da" #, c-format, boost-format msgid "" "The object from file %s is too small, and may be in meters or inches.\n" " Do you want to scale to millimeters?" msgstr "" "%s fitxategiko objektua txikiegia da, eta baliteke metrotan edo hazbetetan egotea.\n" " Milimetroetara eskalatu nahi duzu?" msgid "Object too small" msgstr "Objektua txikiegia da" msgid "" "This file contains several objects positioned at multiple heights.\n" "Instead of considering them as multiple objects, should \n" "the file be loaded as a single object with multiple parts?" msgstr "" "Fitxategi honek hainbat altueratan kokatutako zenbait objektu ditu.\n" "Objektu anizkoitz gisa hartu beharrean, fitxategia hainbat pieza dituen objektu bakar gisa kargatu nahi duzu?" msgid "Multi-part object detected" msgstr "Pieza anitzeko objektua detektatu da" msgid "Load these files as a single object with multiple parts?\n" msgstr "Kargatu fitxategi hauek pieza anitzeko objektu bakar gisa?\n" msgid "An object with multiple parts was detected" msgstr "Hainbat pieza dituen objektu bat detektatu da" msgid "Auto-Drop" msgstr "Automatikoki jaitsi" #, c-format, boost-format msgid "Connected printer is %s. It must match the project preset for printing.\n" msgstr "Konektatutako inprimagailua %s da. Inprimatzeko, proiektuaren aurrezarpenarekin bat etorri behar du.\n" msgid "Do you want to sync the printer information and automatically switch the preset?" msgstr "Inprimagailuaren informazioa sinkronizatu eta aurrezarpena automatikoki aldatu nahi duzu?" msgid "The file does not contain any geometry data." msgstr "Fitxategiak ez du geometria-daturik." msgid "Your object appears to be too large, do you want to scale it down to fit the print bed automatically?" msgstr "Zure objektua handiegia dela dirudi; automatikoki txikitu nahi duzu inprimatze-ohean kabitzeko?" msgid "Object too large" msgstr "Objektua handiegia da" msgid "Export STL file:" msgstr "Esportatu STL fitxategia:" msgid "Export Draco file:" msgstr "Esportatu Draco fitxategia:" msgid "Export AMF file:" msgstr "Esportatu AMF fitxategia:" msgid "Save file as" msgstr "Gorde fitxategia honela:" msgid "Export OBJ file:" msgstr "Esportatu OBJ fitxategia:" #, c-format, boost-format msgid "" "The file %s already exists.\n" "Do you want to replace it?" msgstr "" "%s fitxategia badago lehendik.\n" "Ordeztu nahi duzu?" msgid "Confirm Save As" msgstr "Berretsi Gorde honela" msgid "Delete object which is a part of cut object" msgstr "Ezabatu ebakitako objektuaren parte den objektua" msgid "" "You are trying to delete an object which is a part of a cut object.\n" "This action will break a cut correspondence.\n" "After that, model consistency can't be guaranteed." msgstr "" "Ebakitako objektu baten parte den objektu bat ezabatzen saiatzen ari zara.\n" "Ekintza honek ebaketaren korrespondentzia hautsiko du.\n" "Ondoren, ezin da modeloaren koherentzia bermatu." msgid "Delete Object" msgstr "Ezabatu objektua" msgid "Delete All Objects" msgstr "Ezabatu objektu guztiak" msgid "Reset Project" msgstr "Berrezarri proiektua" msgid "The selected object couldn't be split." msgstr "Hautatutako objektua ezin izan da zatitu." msgid "Split to Objects" msgstr "Banatu objektutan" msgid "Disable Auto-Drop to preserve Z positioning?\n" msgstr "Auto-Drop desgaitu Z posizioa mantentzeko?\n" msgid "Object with floating parts was detected" msgstr "Airean dauden piezak dituen objektu bat detektatu da" msgid "Another export job is running." msgstr "Beste esportazio-lan bat martxan dago." msgid "Unable to replace with more than one volume" msgstr "Ezin da bolumen bat baino gehiagorekin ordeztu" msgid "Error during replacement" msgstr "Errorea ordezkatzean" msgid "Replace from:" msgstr "Ordeztu hemendik:" msgid "Select a new file" msgstr "Hautatu fitxategi berri bat" msgid "File for the replacement wasn't selected" msgstr "Ez da ordezkatzeko fitxategirik hautatu" msgid "Replace with 3D file" msgstr "Ordeztu 3D fitxategi batekin" msgid "Select folder to replace from" msgstr "Hautatu ordezkatzeko jatorrizko karpeta" msgid "Directory for the replace wasn't selected" msgstr "Ez da ordezkatzeko direktoriorik hautatu" msgid "Replaced with 3D files from directory:\n" msgstr "Direktorio honetako 3D fitxategiekin ordeztuta:\n" #, boost-format msgid "✖ Skipped %1%: same file.\n" msgstr "✖ %1% saltatu da: fitxategi bera.\n" #, boost-format msgid "✖ Skipped %1%: file does not exist.\n" msgstr "✖ %1% saltatu da: fitxategia ez da existitzen.\n" #, boost-format msgid "✖ Skipped %1%: failed to replace.\n" msgstr "✖ %1% saltatu da: ezin izan da ordeztu.\n" #, boost-format msgid "✔ Replaced %1%.\n" msgstr "✔ %1% ordezkatu da.\n" msgid "Replaced volumes" msgstr "Ordeztutako bolumenak" msgid "Please select a file" msgstr "Hautatu fitxategi bat" msgid "Do you want to replace it" msgstr "Ordeztu nahi duzu" msgid "Message" msgstr "Mezua" msgid "Reload from:" msgstr "Birkargatu hemendik:" msgid "Unable to reload:" msgstr "Ezin da birkargatu:" msgid "Error during reload" msgstr "Errorea birkargatzean" msgid "Reload all" msgstr "Birkargatu dena" msgid "There are warnings after slicing models:" msgstr "Abisuak daude modeloak xerratu ondoren:" msgid "warnings" msgstr "abisuak" msgid "Invalid data" msgstr "Datu baliogabeak" msgid "Slicing Canceled" msgstr "Xerraketa bertan behera utzita" #, c-format, boost-format msgid "Slicing Plate %d" msgstr "%d plaka xerratzen" msgid "Please resolve the slicing errors and publish again." msgstr "Konpondu xerratze-erroreak eta argitaratu berriro." msgid "Network plug-in switched successfully." msgstr "Sareko plugina behar bezala aldatu da." msgid "Success" msgstr "Ongi" msgid "Failed to load network plug-in. Please restart the application." msgstr "Ezin izan da sareko plugina kargatu. Berrabiarazi aplikazioa." msgid "The network plug-in was not detected. Network related features are unavailable." msgstr "Ez da sareko plugina detektatu. Sarearekin lotutako funtzioak ez daude erabilgarri." msgid "" "Preview only mode:\n" "The loaded file contains G-code only, cannot enter the Prepare page." msgstr "" "Aurreikuspen-modua soilik:\n" "Kargatutako fitxategiak G-codea bakarrik dauka; ezin da Prestatu orrian sartu." msgid "" "The nozzle type and AMS quantity information has not been synced from the connected printer.\n" "After syncing, software can optimize printing time and filament usage when slicing.\n" "Would you like to sync now?" msgstr "" "Pita motaren eta AMS kopuruaren informazioa ez da sinkronizatu konektatutako inprimagailutik.\n" "Sinkronizatu ondoren, softwareak inprimatze-denbora eta filamentu-erabilera optimiza ditzake xerratzean.\n" "Orain sinkronizatu nahi duzu?" msgid "Sync now" msgstr "Sinkronizatu orain" msgid "You can keep the modified presets for the new project or discard them" msgstr "Aldatutako aurrezarpenak proiektu berrirako gorde edo baztertu ditzakezu" msgid "Creating a new project" msgstr "Proiektu berria sortzen" msgid "Load project" msgstr "Kargatu proiektua" msgid "" "Failed to save the project.\n" "Please check whether the folder exists online or if other programs have the project file open." msgstr "" "Ezin izan da proiektua gorde.\n" "Egiaztatu karpeta linean badagoen edo beste programa batek proiektu-fitxategia irekita duen." msgid "Save project" msgstr "Gorde proiektua" msgid "Importing Model" msgstr "Modeloa inportatzen" msgid "Preparing 3MF file..." msgstr "3MF fitxategia prestatzen..." msgid "Download failed; unknown file format." msgstr "Deskargak huts egin du; fitxategi-formatu ezezaguna." msgid "Downloading project..." msgstr "Proiektua deskargatzen..." msgid "Download failed; File size exception." msgstr "Deskargak huts egin du; fitxategiaren tamainarekin arazoa." #, c-format, boost-format msgid "Project downloaded %d%%" msgstr "Proiektua deskargatuta: %d%%" msgid "Importing to Orca Slicer failed. Please download the file and manually import it." msgstr "OrcaSlicerrera inportatzeak huts egin du. Deskargatu fitxategia eta inportatu eskuz." msgid "INFO:" msgstr "INFO:" msgid "No accelerations provided for calibration. Use default acceleration value " msgstr "Ez da azeleraziorik eman kalibraziorako. Erabili azelerazio-balio lehenetsia " msgid "No speeds provided for calibration. Use default optimal speed " msgstr "Ez da abiadurarik eman kalibraziorako. Erabili abiadura optimo lehenetsia " msgid "Import SLA archive" msgstr "SLA artxiboa inportatu" msgid "The selected file" msgstr "Hautatutako fitxategiak" msgid "Does not contain valid G-code." msgstr "Ez dauka baliozko G-coderik." msgid "An Error has occurred while loading the G-code file." msgstr "Errore bat gertatu da G-code fitxategia kargatzean." #. TRN %1% is archive path #, boost-format msgid "Loading of a ZIP archive on path %1% has failed." msgstr "Huts egin du %1% bideko ZIP artxiboa kargatzean." #. TRN: First argument = path to file, second argument = error description #, boost-format msgid "Failed to unzip file to %1%: %2%" msgstr "Fitxategia ezin izan da %1%(e)n deskonprimitu: %2%" #, boost-format msgid "Failed to find unzipped file at %1%. Unzipping of file has failed." msgstr "Ezin izan da %1% helbidean deskonprimitutako fitxategia aurkitu. Fitxategia deskonprimitzeak huts egin du." msgid "Drop project file" msgstr "Jaregin proiektu-fitxategia" msgid "Please select an action" msgstr "Hautatu ekintza bat" msgid "Open as project" msgstr "Ireki proiektu gisa" msgid "Import geometry only" msgstr "Inportatu geometria bakarrik" msgid "Only one G-code file can be opened at a time." msgstr "G-code fitxategi bakarra ireki daiteke aldi berean." msgid "G-code loading" msgstr "G-codea kargatzen" msgid "G-code files and models cannot be loaded together!" msgstr "G-code fitxategiak eta modeloak ezin dira batera kargatu!" msgid "Unable to add models in preview mode" msgstr "Ezin dira modeloak gehitu aurrebista moduan" msgid "All objects will be removed, continue?" msgstr "Objektu guztiak kenduko dira; jarraitu?" msgid "The current project has unsaved changes. Would you like to save before continuing?" msgstr "Uneko proiektuak gorde gabeko aldaketak ditu. Jarraitu aurretik gorde nahi dituzu?" msgid "Number of copies:" msgstr "Kopia kopurua:" msgid "Copies of the selected object" msgstr "Hautatutako objektuaren kopiak" msgid "Save G-code file as:" msgstr "Gorde G-code fitxategia honela:" msgid "Save SLA file as:" msgstr "Gorde SLA fitxategia honela:" msgid "The provided file name is not valid." msgstr "Emandako fitxategi-izena ez da baliozkoa." msgid "The following characters are not allowed by a FAT file system:" msgstr "Karaktere hauek ez ditu FAT fitxategi-sistemak onartzen:" msgid "Save Sliced file as:" msgstr "Gorde xerratutako fitxategia honela:" #, c-format, boost-format msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer." msgstr "%s fitxategia inprimagailuaren biltegiratze-eremura bidali da eta inprimagailuan ikus daiteke." msgid "The nozzle type is not set. Please set the nozzle and try again." msgstr "Pita mota ez dago ezarrita. Ezarri pita eta saiatu berriro." msgid "The nozzle type is not set. Please check." msgstr "Pita mota ez dago ezarrita. Egiaztatu." msgid "Unable to perform boolean operation on model meshes. Only positive parts will be kept. You may fix the meshes and try again." msgstr "Ezin da eragiketa boolearra egin modeloaren sareetan. Parte positiboak bakarrik mantenduko dira. Sareak konpondu eta berriro saia zaitezke." #, boost-format msgid "Reason: part \"%1%\" is empty." msgstr "Arrazoia: \"%1%\" pieza hutsik dago." #, boost-format msgid "Reason: part \"%1%\" does not bound a volume." msgstr "Arrazoia: \"%1%\" parteak ez du bolumenik mugatzen." #, boost-format msgid "Reason: part \"%1%\" has self intersection." msgstr "Arrazoia: \"%1%\" parteak auto-gurutzaketa du." #, boost-format msgid "Reason: \"%1%\" and another part have no intersection." msgstr "Arrazoia: \"%1%\" eta beste parte batek ez dute gurutzaketarik." msgid "Unable to perform boolean operation on model meshes. Only positive parts will be exported." msgstr "Ezin da eragiketa boolearra egin modeloaren sareetan. Parte positiboak bakarrik esportatuko dira." msgid "Flashforge host is not available." msgstr "Flashforge ostalaria ez dago erabilgarri." msgid "Unable to log in to the Flashforge printer." msgstr "Ezin izan da Flashforge inprimagailuan saioa hasi." msgid "Is the printer ready? Is the print sheet in place, empty and clean?" msgstr "Inprimagailua prest dago? Inprimatze-plaka jarrita, hutsik eta garbi dago?" msgid "Upload and Print" msgstr "Igo eta inprimatu" msgid "Abnormal print file data. Please slice again" msgstr "Inprimatze-fitxategiaren datu anormalak. Mesedez, xerratu berriro" msgid "" "Print By Object: \n" "We suggest using auto-arrange to avoid collisions when printing." msgstr "" "Objektuz objektu inprimatzea:\n" "Antolaketa automatikoa erabiltzea gomendatzen dugu inprimatzean talkak saihesteko." msgid "Send G-code" msgstr "Bidali G-codea" msgid "Send to printer" msgstr "Bidali inprimagailura" msgid "Custom supports and color painting were removed before repairing." msgstr "Euskarri pertsonalizatuak eta kolore-margotzea kendu dira konpondu aurretik." msgid "Optimize Rotation" msgstr "Optimizatu biraketa" #, c-format, boost-format msgid "Printer not connected. Please go to the device page to connect %s before syncing." msgstr "Inprimagailua ez dago konektatuta. Joan gailuaren orrira eta konektatu %s sinkronizatu aurretik." #, c-format, boost-format msgid "OrcaSlicer can't connect to %s. Please check if the printer is powered on and connected to the network." msgstr "OrcaSlicer ezin da %s-rekin konektatu. Egiaztatu inprimagailua piztuta dagoela eta sarera konektatuta dagoela." #, c-format, boost-format msgid "The currently connected printer on the device page is not %s. Please switch to %s before syncing." msgstr "Gailuaren orrian une honetan konektatutako inprimagailua ez da %s. Aldatu %s-ra sinkronizatu aurretik." msgid "There are no filaments on the printer. Please load the filaments on the printer first." msgstr "Inprimagailuan ez dago filamenturik. Kargatu filamentuak inprimagailuan lehenik." msgid "The filaments on the printer are all unknown types. Please go to the printer screen or software device page to set the filament type." msgstr "Inprimagailuko filamentu guztiek mota ezezaguna dute. Joan inprimagailuaren pantailara edo softwareko gailuaren orrira filamentu mota ezartzeko." msgid "Device Page" msgstr "Gailuaren orria" msgid "Synchronize AMS Filament Information" msgstr "Sinkronizatu AMS filamentuen informazioa" msgid "OrcaCloud plugins required by the current preset are not installed:" msgstr "Uneko aurrezarpenak eskatzen dituen OrcaCloud pluginak ez daude instalatuta:" msgid "Install Plugins" msgstr "Instalatu pluginak" msgid "Local plugins required by the current preset are missing:" msgstr "Uneko aurrezarpenak eskatzen dituen plugin lokalak falta dira:" msgid "Find on OrcaCloud" msgstr "OrcaCloud-en bilatu" msgid "Plugins required by the current preset are not activated:" msgstr "Uneko aurrezarpenak eskatzen dituen pluginak ez daude aktibatuta:" msgid "Activate Now" msgstr "Aktibatu orain" msgid "The installed plugin does not provide the required capability — it may be outdated:" msgstr "Instalatutako pluginak ez du beharrezko funtzionaltasuna eskaintzen; baliteke zaharkituta egotea:" msgid "Preparing to install plugins..." msgstr "Pluginak instalatzeko prestatzen..." msgid "Installing plugins" msgstr "Pluginak instalatzen" msgid "Cancelling — finishing the current plugin..." msgstr "Bertan behera uzten — uneko plugina amaitzen..." #, boost-format msgid "Installing %1%..." msgstr "Instalatzen %1%..." msgid "Plate Settings" msgstr "Plakaren ezarpenak" #, boost-format msgid "Number of currently selected parts: %1%\n" msgstr "Une honetan hautatutako piezen kopurua: %1%\n" #, boost-format msgid "Number of currently selected objects: %1%\n" msgstr "Une honetan hautatutako objektuen kopurua: %1%\n" #, boost-format msgid "Part name: %1%\n" msgstr "Piezaren izena: %1%\n" #, boost-format msgid "Object name: %1%\n" msgstr "Objektuaren izena: %1%\n" #, boost-format msgid "Size: %1% x %2% x %3% in\n" msgstr "Tamaina: %1% x %2% x %3% in\n" #, boost-format msgid "Size: %1% x %2% x %3% mm\n" msgstr "Tamaina: %1% x %2% x %3% mm\n" #, boost-format msgid "Volume: %1% in³\n" msgstr "Bolumena: %1% in³\n" #, boost-format msgid "Volume: %1% mm³\n" msgstr "Bolumena: %1% mm³\n" #, boost-format msgid "Triangles: %1%\n" msgstr "Triangeluak: %1%\n" msgid "Use \"Fix Model\" to repair the mesh." msgstr "Erabili \"Konpondu modeloa\" sarea konpontzeko." #, c-format, boost-format msgid "Plate %d: %s is not suggested for use printing filament %s (%s). If you still want to do this print job, please set this filament's bed temperature to a number that is not zero." msgstr "%d. plaka: ez da gomendatzen %s erabiltzea %s (%s) filamentua inprimatzeko. Hala ere inprimaketa egin nahi baduzu, ezarri filamentuko ohearen tenperatura zero ez den balio batean." msgid "Currently, the object configuration form cannot be used with a multiple-extruder printer." msgstr "Une honetan, objektuaren konfigurazio-inprimakia ezin da erabili estrusore anitzeko inprimagailu batekin." msgid "Not available" msgstr "Ez dago erabilgarri" msgid "isometric" msgstr "isometrikoa" msgid "top_front" msgstr "goia_aurrealdea" msgid "top" msgstr "goikoa" msgid "bottom" msgstr "behekoa" msgid "front" msgstr "aurrealdea" msgid "rear" msgstr "atzealdea" msgid "Switching languages requires the application to restart.\n" msgstr "Hizkuntza aldatzeko aplikazioa berrabiarazi behar da.\n" msgid "Do you want to continue?" msgstr "Jarraitu nahi duzu?" msgid "Language selection" msgstr "Hizkuntza-hautaketa" msgid "Switching application language while some presets are modified." msgstr "Aplikazioaren hizkuntza aldatzen ari da aurrezarpen batzuk aldatuta dauden bitartean." msgid "Asia-Pacific" msgstr "Asia-Pazifikoa" msgid "China" msgstr "Txina" msgid "Europe" msgstr "Europa" msgid "North America" msgstr "Ipar Amerika" msgid "Others" msgstr "Besteak" msgid "Changing the region will log you out of your account.\n" msgstr "Eskualdea aldatzean zure kontuko saioa itxiko da.\n" msgid "Region selection" msgstr "Eskualde-hautaketa" msgid "sec" msgstr "s" msgid "The period of backup in seconds." msgstr "Babeskopien arteko denbora, segundotan." msgid "Bed Temperature Difference Warning" msgstr "Ohearen tenperatura-aldearen abisua" msgid "" "Using filaments with significantly different temperatures may cause:\n" "• Extruder clogging\n" "• Nozzle damage\n" "• Layer adhesion issues\n" "\n" "Continue with enabling this feature?" msgstr "" "Tenperatura oso desberdineko filamentuak erabiltzeak honako hauek eragin ditzake:\n" "• Estrusorea buxatzea\n" "• Pita hondatzea\n" "• Geruzen itsaspen-arazoak\n" "\n" "Eginbide hau gaituta jarraitu nahi duzu?" msgid "Browse" msgstr "Arakatu" msgid "Choose folder for downloaded items" msgstr "Hautatu deskargatutako elementuen karpeta" msgid "Choose Download Directory" msgstr "Aukeratu deskarga-direktorioa" #, c-format, boost-format msgid "" "You've selected network plug-in version %s.\n" "\n" "Would you like to download and install this version now?\n" "\n" "Note: The application may need to restart after installation." msgstr "" "%s sareko plugin-bertsioa hautatu duzu.\n" "\n" "Bertsio hau deskargatu eta instalatu nahi duzu orain?\n" "\n" "Oharra: baliteke aplikazioa instalazioaren ondoren berrabiarazi behar izatea." msgid "Download Network Plug-in" msgstr "Deskargatu sareko plugina" msgid "Reload the network plug-in without restarting the application" msgstr "Birkargatu sareko plugina aplikazioa berrabiarazi gabe" msgid "Network plug-in reloaded successfully." msgstr "Sareko plugina behar bezala birkargatu da." msgid "Reload" msgstr "Birkargatu" msgid "Failed to reload network plug-in. Please restart the application." msgstr "Ezin izan da sareko plugina birkargatu. Berrabiarazi aplikazioa." msgid "Reload Failed" msgstr "Birkargatzeak huts egin du" msgid "Associate" msgstr "Elkartu" msgid "with OrcaSlicer so that Orca can open models from" msgstr "OrcaSlicerrekin, Orcak hemendik modeloak ireki ahal izateko:" msgid "Current Association: " msgstr "Uneko esleipena: " msgid "Current Instance" msgstr "Uneko instantzia" msgid "Current Instance Path: " msgstr "Uneko instantziaren bide-izena: " msgid "General" msgstr "Orokorra" msgid "Metric" msgstr "Metrikoa" msgid "Imperial" msgstr "Inperiala" msgid "Units" msgstr "Unitateak" msgid "Home" msgstr "Hasiera" msgid "Default page" msgstr "Orri lehenetsia" msgid "Set the page opened on startup." msgstr "Ezarri abioan irekitzen den orrialdea." msgid "Enable dark Mode" msgstr "Gaitu modu iluna" msgid "Allow only one OrcaSlicer instance" msgstr "Baimendu OrcaSlicer instantzia bakarra" msgid "On OSX there is always only one instance of app running by default. However it is allowed to run multiple instances of same app from the command line. In such case this settings will allow only one instance." msgstr "OSX-en, lehenespenez, aplikazioaren instantzia bakarra dago martxan. Hala ere, komando-lerrotik aplikazio beraren hainbat instantzia exekuta daitezke. Kasu horretan, ezarpen honek instantzia bakarra baimenduko du." msgid "If this is enabled, when starting OrcaSlicer and another instance of the same OrcaSlicer is already running, that instance will be reactivated instead." msgstr "Hau gaituta badago, OrcaSlicer abiaraztean OrcaSlicer beraren beste instantzia bat martxan badago, instantzia hori berraktibatuko da." msgid "Show splash screen" msgstr "Erakutsi hasierako pantaila" msgid "Show the splash screen during startup." msgstr "Erakutsi hasierako pantaila abiaraztean." msgid "Use window buttons on left side" msgstr "Erabili leiho-botoiak ezkerreko aldean" msgid "(Requires restart)" msgstr "(Berrabiarazi behar da)" msgid "Downloads folder" msgstr "Deskargen karpeta" msgid "Target folder for downloaded items" msgstr "Deskargatutako elementuen helburuko karpeta" msgid "Load All" msgstr "Kargatu dena" msgid "Ask When Relevant" msgstr "Galdetu dagokionean" msgid "Always Ask" msgstr "Galdetu beti" msgid "Load Geometry Only" msgstr "Kargatu geometria bakarrik" msgid "Load behaviour" msgstr "Kargatze-jokabidea" msgid "Should printer/filament/process settings be loaded when opening a 3MF file?" msgstr "Inprimagailuaren, filamentuen eta prozesuaren ezarpenak kargatu behar dira 3MF fitxategi bat irekitzean?" msgid "Auto backup" msgstr "Babeskopia automatikoa" msgid "Backup your project periodically to help with restoring from an occasional crash." msgstr "Egin proiektuaren babeskopia aldizka, noizbehinkako hutsegite baten ondoren leheneratzen laguntzeko." msgid "Maximum recent files" msgstr "Azken fitxategien gehieneko kopurua" msgid "Maximum count of recent files" msgstr "Azken fitxategien gehieneko kopurua" msgid "Add STL/STEP files to recent files list" msgstr "Gehitu STL/STEP fitxategiak azken fitxategien zerrendara" msgid "Don't warn when loading 3MF with modified G-code" msgstr "Ez abisatu aldatutako G-codea duen 3MF bat kargatzean" msgid "Show options when importing STEP file" msgstr "Erakutsi aukerak STEP fitxategia inportatzean" msgid "If enabled, a parameter settings dialog will appear during STEP file import." msgstr "Gaituta badago, parametro-ezarpenen elkarrizketa-koadro bat agertuko da STEP fitxategia inportatzean." msgid "STEP importing: linear deflection" msgstr "STEP inportazioa: desbideratze lineala" msgid "" "Linear deflection used when meshing imported STEP files.\n" "Smaller values produce higher-quality meshes but increase processing time.\n" "Used as the default in the import dialog, or directly when the import dialog is disabled.\n" "Default: 0.003 mm." msgstr "" "Inportatutako STEP fitxategiak sare bihurtzean erabilitako desbideratze lineala.\n" "Balio txikiagoek kalitate handiagoko sareak sortzen dituzte, baina prozesatze-denbora handitzen dute.\n" "Inportazio-elkarrizketa-koadroko balio lehenetsi gisa erabiltzen da, edo zuzenean elkarrizketa-koadroa desgaituta dagoenean.\n" "Lehenetsia: 0,003 mm." msgid "STEP importing: angle deflection" msgstr "STEP inportazioa: angelu-desbideratzea" msgid "" "Angle deflection used when meshing imported STEP files.\n" "Smaller values produce higher-quality meshes but increase processing time.\n" "Used as the default in the import dialog, or directly when the import dialog is disabled.\n" "Default: 0.5." msgstr "" "Inportatutako STEP fitxategiak sare bihurtzean erabilitako angelu-desbideratzea.\n" "Balio txikiagoek kalitate handiagoko sareak sortzen dituzte, baina prozesatze-denbora handitzen dute.\n" "Inportazio-elkarrizketa-koadroko balio lehenetsi gisa erabiltzen da, edo zuzenean elkarrizketa-koadroa desgaituta dagoenean.\n" "Lehenetsia: 0,5." msgid "STEP importing: Split into multiple objects" msgstr "STEP inportatzea: banatu hainbat objektutan" msgid "" "If enabled, compound and compsolid shapes in imported STEP files are split into multiple objects.\n" "Used as the default in the import dialog, or directly when the import dialog is disabled.\n" "Default: disabled." msgstr "" "Gaituta badago, inportatutako STEP fitxategietako forma konposatuak eta compsolid formak hainbat objektutan banatzen dira.\n" "Inportazio-elkarrizketa-koadroko balio lehenetsi gisa erabiltzen da, edo zuzenean elkarrizketa-koadroa desgaituta dagoenean.\n" "Lehenetsia: desgaituta." msgid "Quality level for Draco export" msgstr "Draco esportaziorako kalitate-maila" msgid "bits" msgstr "bit" msgid "" "Controls the quantization bit depth used when compressing the mesh to Draco format.\n" "0 = lossless compression (geometry is preserved at full precision). Valid lossy values range from 8 to 30.\n" "Lower values produce smaller files but lose more geometric detail; higher values preserve more detail at the cost of larger files." msgstr "" "Sarea Draco formatura konprimitzean erabilitako kuantizazio-bit sakonera kontrolatzen du.\n" "0 = galerarik gabeko konpresioa (geometria doitasun osoz mantentzen da). Galeradun balio baliodunak 8tik 30era bitartekoak dira.\n" "Balio txikiagoek fitxategi txikiagoak sortzen dituzte, baina xehetasun geometriko gehiago galtzen dute; balio handiagoek xehetasun gehiago mantentzen dute, fitxategi handiagoen truke." msgid "Store full source file paths in projects" msgstr "Gorde jatorrizko fitxategien bide osoak proiektuetan" msgid "If enabled, saved projects store the absolute path to imported source files (STEP/STL/...), so \"Reload from disk\" still works when the source file is kept in a different folder than the project. If disabled, only the filename is stored, which keeps projects portable and avoids embedding absolute paths." msgstr "Gaituta badago, gordetako proiektuek inportatutako jatorrizko fitxategien (STEP/STL/...) bide absolutua gordetzen dute; horrela, \"Birkargatu diskotik\" aukerak funtzionatzen jarraitzen du jatorrizko fitxategia proiektuaren karpeta ez den beste batean dagoenean. Desgaituta badago, fitxategi-izena soilik gordetzen da; horrek proiektuak eramangarri mantentzen ditu eta bide absolutuak txertatzea saihesten du." msgid "Preset" msgstr "Aurrezarpena" msgid "Remember printer configuration" msgstr "Gogoratu inprimagailuaren konfigurazioa" msgid "If enabled, Orca will remember and switch filament/process configuration for each printer automatically." msgstr "Gaituta badago, Orcak automatikoki gogoratuko eta aldatuko du inprimagailu bakoitzerako filamentua/prozesuaren konfigurazioa." msgid "Group user filament presets" msgstr "Taldekatu erabiltzailearen filamentuen aurrezarpenak" msgid "Group user filament presets based on selection" msgstr "Taldekatu erabiltzailearen filamentuen aurrezarpenak hautapenaren arabera" msgid "By type" msgstr "Motaren arabera" msgid "By vendor" msgstr "Hornitzailearen arabera" msgid "Optimize filaments area height for..." msgstr "Optimizatu filamentuen eremuaren altuera honetarako..." msgid "filaments" msgstr "filamentuak" msgid "Optimizes filament area maximum height by chosen filament count." msgstr "Filamentu-eremuaren gehieneko altuera optimizatzen du hautatutako filamentu-kopuruaren arabera." msgid "Show shared profiles notification" msgstr "Erakutsi partekatutako profilen jakinarazpena" msgid "Show a notification with a link to browse shared profiles when the selected printer is changed." msgstr "Hautatutako inprimagailua aldatzen denean, erakutsi partekatutako profilak arakatzeko esteka duen jakinarazpen bat." msgid "Features" msgstr "Ezaugarriak" msgid "Multi device management" msgstr "Gailu anitzen kudeaketa" msgid "With this option enabled, you can send a task to multiple devices at the same time and manage multiple devices." msgstr "Aukera hau gaituta, zeregin bat hainbat gailutara bidali eta hainbat gailu kudea ditzakezu aldi berean." msgid "Pop up to select filament grouping mode" msgstr "Erakutsi filamentuak taldekatzeko modua hautatzeko leihoa" msgid "Behaviour" msgstr "Jokabidea" msgid "Auto flush after changing..." msgstr "Purgatu automatikoki aldatu ondoren..." msgid "Auto calculate flushing volumes when selected values changed" msgstr "Kalkulatu automatikoki purgatze-bolumenak hautatutako balioak aldatzean" msgid "Auto arrange plate after cloning" msgstr "Antolatu plaka automatikoki klonatu ondoren" msgid "Auto slice after changes" msgstr "Xerratu automatikoki aldaketen ondoren" msgid "If enabled, OrcaSlicer will re-slice automatically whenever slicing-related settings change." msgstr "Gaituta badago, OrcaSlicer-ek automatikoki berriro xerratuko du xerratzearekin lotutako ezarpenak aldatzen diren bakoitzean." msgid "Delay in seconds before auto slicing starts, allowing multiple edits to be grouped. Use 0 to slice immediately." msgstr "Xerratze automatikoa hasi aurreko atzerapena segundotan, hainbat aldaketa multzokatzeko. Erabili 0 berehala xerratzeko." msgid "Remove mixed temperature restriction" msgstr "Kendu tenperatura nahasien murrizketa" msgid "With this option enabled, you can print materials with a large temperature difference together." msgstr "Aukera hau gaituta, tenperatura-alde handia duten materialak batera inprima ditzakezu." msgid "Touchpad" msgstr "Ukipen-panela" msgid "Camera style" msgstr "Kamera-estiloa" msgid "" "Select camera navigation style.\n" "Default: LMB+move for rotation, RMB/MMB+move for panning.\n" "Touchpad: Alt+move for rotation, Shift+move for panning." msgstr "" "Hautatu kameraren nabigazio-estiloa.\n" "Lehenetsia: LMB+mugitu biratzeko, RMB/MMB+mugitu desplazatzeko.\n" "Ukipen-panela: Alt+mugitu biratzeko, Shift+mugitu desplazatzeko." msgid "Orbit speed multiplier" msgstr "Orbita-abiaduraren biderkatzailea" msgid "Multiplies the orbit speed for finer or coarser camera movement." msgstr "Orbita-abiadura biderkatzen du kameraren mugimendua finagoa edo zakarragoa egiteko." msgid "Zoom to mouse position" msgstr "Zooma saguaren posiziora" msgid "Zoom in towards the mouse pointer's position in the 3D view, rather than the 2D window center." msgstr "Zooma egin saguaren erakuslearen posiziorantz 3D ikuspegian, 2D leihoaren erdigunera beharrean." msgid "Use free camera" msgstr "Erabili kamera librea" msgid "If enabled, use free camera. If not enabled, use constrained camera." msgstr "Gaituta badago, kamera librea erabiltzen du. Gaituta ez badago, kamera mugatua erabiltzen du." msgid "Reverse mouse zoom" msgstr "Alderantzikatu saguaren zooma" msgid "If enabled, reverses the direction of zoom with mouse wheel." msgstr "Gaituta badago, saguaren gurpilarekin zoomaren norabidea alderantzikatzen du." msgid "Pan" msgstr "Desplazatu" msgid "Left Mouse Drag" msgstr "Saguaren ezkerreko botoiarekin arrastatu" msgid "Set the action that dragging the left mouse button should perform." msgstr "Ezarri saguaren ezkerreko botoia arrastatzean egin beharreko ekintza." msgid "Middle Mouse Drag" msgstr "Erdiko sagu-botoiaren arrastatzea" msgid "Set the action that dragging the middle mouse button should perform." msgstr "Ezarri saguaren erdiko botoia arrastatzean egin beharreko ekintza." msgid "Right Mouse Drag" msgstr "Saguaren eskuineko botoiarekin arrastatu" msgid "Set the action that dragging the right mouse button should perform." msgstr "Ezarri saguaren eskuineko botoia arrastatzean egin beharreko ekintza." msgid "Clear my choice on..." msgstr "Garbitu nire aukera hemen..." msgid "Unsaved projects" msgstr "Gorde gabeko proiektuak" msgid "Clear my choice on the unsaved projects." msgstr "Garbitu gorde gabeko proiektuetarako nire aukera." msgid "Unsaved presets" msgstr "Gorde gabeko aurrezarpenak" msgid "Clear my choice on the unsaved presets." msgstr "Garbitu gorde gabeko aurrezarpenetarako nire aukera." msgid "Synchronizing printer preset" msgstr "Inprimagailuaren aurrezarpena sinkronizatzen" msgid "Clear my choice for synchronizing printer preset after loading the file." msgstr "Garbitu fitxategia kargatu ondoren inprimagailuaren aurrezarpena sinkronizatzeko nire hautapena." msgid "Graphics" msgstr "Grafikoak" msgid "Smooth normals" msgstr "Leundu normalak" msgid "" "Applies smooth normals to the model.\n" "\n" "Requires manual scene reload to take effect (right-click on 3D view → \"Reload All\")." msgstr "" "Normal leunak aplikatzen dizkio modeloari.\n" "\n" "Eskuz berriro kargatu behar da eszena eragina izan dezan (egin eskuin-klik 3D ikuspegian → \"Birkargatu dena\")." msgid "Phong shading" msgstr "Phong itzaldura" msgid "Uses Phong shading inside realistic view." msgstr "Phong itzaldura erabiltzen du ikuspegi errealistan." msgid "SSAO ambient occlusion" msgstr "SSAO giro-oklusioa" msgid "Applies SSAO in realistic view." msgstr "SSAO aplikatzen du ikuspegi errealistan." msgid "Shadows" msgstr "Itzalak" msgid "Renders cast shadows on the plate, other objects, and each object onto itself in realistic view." msgstr "Jaurtitako itzalak errendatzen ditu plakan, beste objektuetan eta objektu bakoitzean bere buruarengan ikuspegi errealistan." msgid "Anti-aliasing" msgstr "Antialiasing-a" msgid "MSAA Multiplier" msgstr "MSAA biderkatzailea" msgid "" "Set the Multi-Sample Anti-Aliasing level.\n" "Higher values result in smoother edges, but the impact on performance is exponential.\n" "Lower values improve performance, at the cost of jagged edges.\n" "If disabled, its recommended to enable FXAA to reduce jagged edges with minimal performance impact.\n" "\n" "Requires application restart." msgstr "" "Ezarri lagin anitzeko antialiasing-maila.\n" "Balio handiagoek ertz leunagoak ematen dituzte, baina errendimendu-eragina esponentziala da.\n" "Balio txikiagoek errendimendua hobetzen dute, ertz koska gehiagoren truke.\n" "Desgaituta badago, FXAA gaitzea gomendatzen da ertz koskatuak errendimendu-eragin txikiarekin murrizteko.\n" "\n" "Aplikazioa berrabiarazi behar da." msgid "Disabled" msgstr "Desgaituta" msgid "FXAA post-processing" msgstr "FXAA postprozesamendua" msgid "" "Applies Fast Approximate Anti-Aliasing as a screen-space pass.\n" "Useful for disabling or reducing the MSAA setting to improve performance.\n" "\n" "Takes effect immediately." msgstr "" "Antialiasing hurbilketa azkarra aplikatzen du pantaila-espazioko pasabide gisa.\n" "Erabilgarria da MSAA ezarpena desgaitzeko edo murrizteko, errendimendua hobetzeko.\n" "\n" "Berehala hartzen du eragina." msgid "FPS" msgstr "FPS" msgid "FPS cap" msgstr "FPS muga" msgid "(0 = unlimited)" msgstr "(0 = mugarik gabe)" msgid "" "Limits viewport frame rate to reduce GPU load and power usage.\n" "Set to 0 for unlimited frame rate." msgstr "" "Ikuspegiaren fotograma-tasa mugatzen du GPUaren karga eta energia-kontsumoa murrizteko.\n" "Ezarri 0 fotograma-tasa mugagabea erabiltzeko." msgid "Show FPS overlay" msgstr "Erakutsi FPS gainjartzea" msgid "Displays current viewport FPS in the top-right corner." msgstr "Uneko ikuspegiaren FPSa goiko eskuineko izkinan erakusten du." # AI Translated msgid "G-code Preview" msgstr "G-code aurrebista" # AI Translated msgid "Dim lower layers" msgstr "Ilundu beheko geruzak" # AI Translated msgid "When scrubbing the layer slider in the sliced preview, render the layers below the current one darkened so that only the layer being viewed is shown at full brightness." msgstr "Xerratutako aurrebistan geruza-graduatzailea mugitzean, unekoaren azpiko geruzak ilunduta erakusten ditu, ikusten ari den geruza soilik distira osoz ager dadin." # AI Translated msgid "Dimmed layer brightness" msgstr "Ilundutako geruzen distira" msgid "%" msgstr "%" # AI Translated msgid "" "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n" "99% is barely darkened, 0% renders them black. Capped at 99% because 100% would be the same as disabling the option." msgstr "" "\"Ilundu beheko geruzak\" gaituta dagoenean ilundutako geruzak zein distiratsu marrazten diren.\n" "%99 balioak ozta-ozta iluntzen ditu, %0 balioak beltz bihurtzen ditu. Gehienez %99 onartzen da, %100 balioak aukera desgaitzearen gauza bera egingo bailuke." msgid "Login region" msgstr "Saio-hasierako eskualdea" msgid "Stealth mode" msgstr "Modu isila" msgid "" "This disables all cloud features, including Orca Cloud profile syncing. Users who prefer to work entirely offline can enable this option.\n" "Note: When Stealth Mode is enabled, your user profiles will not be backed up to Orca Cloud." msgstr "" "Honek hodeiko eginbide guztiak desgaitzen ditu, Orca Cloud profilen sinkronizazioa barne. Guztiz lineaz kanpo lan egin nahi duten erabiltzaileek aukera hau gaitu dezakete.\n" "Oharra: Modu ezkutua gaituta dagoenean, zure erabiltzaile-profilen segurtasun-kopiarik ez da egingo Orca Cloud-en." msgid "Hide login side panel" msgstr "Ezkutatu saioa hasteko alboko panela" msgid "Hide the login side panel on the home page." msgstr "Ezkutatu saioa hasteko alboko panela hasierako orrian." msgid "Network test" msgstr "Sare-proba" msgid "Test" msgstr "Probatu" msgid "Cloud Providers" msgstr "Hodei-hornitzaileak" msgid "Enable Bambu Cloud" msgstr "Gaitu Bambu Cloud" msgid "Allow logging into Bambu Cloud alongside Orca Cloud. When enabled, a Bambu login section appears on the homepage." msgstr "Baimendu Bambu Cloud-en saioa hastea Orca Cloud-ekin batera. Gaituta dagoenean, Bambu saioa hasteko atal bat agertzen da hasierako orrian." msgid "Update & sync" msgstr "Eguneratu eta sinkronizatu" msgid "Check for stable updates only" msgstr "Egiaztatu eguneratze egonkorrak bakarrik" msgid "Auto sync user presets (Printer/Filament/Process)" msgstr "Sinkronizatu automatikoki erabiltzailearen aurrezarpenak (inprimagailua/filamentua/prozesua)" msgid "Filament sync mode" msgstr "Filamentu-sinkronizazioaren modua" msgid "Choose whether sync updates both filament preset and color, or only color." msgstr "Hautatu sinkronizazioak filamentuaren aurrezarpena eta kolorea eguneratuko dituen, edo kolorea soilik." msgid "Filament & Color" msgstr "Filamentua eta kolorea" msgid "Color only" msgstr "Kolorea soilik" msgid "Update built-in presets automatically." msgstr "Eguneratu automatikoki aurrezarpen integratuak." msgid "Use encrypted file for token storage" msgstr "Erabili fitxategi zifratua tokenak gordetzeko" msgid "Store authentication tokens in an encrypted file instead of the system keychain. (Requires restart)" msgstr "Gorde autentifikazio-tokenak fitxategi zifratu batean sistemaren gako-katearen ordez. (Berrabiarazi behar da)" msgid "Bambu network plug-in" msgstr "Bambu sareko plugina" msgid "Enable Bambu network plug-in" msgstr "Gaitu Bambu sareko plugina" msgid "Network plug-in version" msgstr "Sareko pluginaren bertsioa" msgid "Select the network plug-in version to use" msgstr "Hautatu erabili beharreko sareko pluginaren bertsioa" msgid "Associate files to OrcaSlicer" msgstr "Esleitu fitxategiak OrcaSlicerri" msgid "File associations for the Microsoft Store version are managed by Windows Settings." msgstr "Microsoft Store bertsioko fitxategi-elkarteak Windows ezarpenen bidez kudeatzen dira." msgid "Open Windows Default Apps Settings" msgstr "Ireki Windows-en aplikazio lehenetsien ezarpenak" msgid "Associate 3MF files to OrcaSlicer" msgstr "Lotu 3MF fitxategiak OrcaSlicer-ekin" msgid "If enabled, this sets OrcaSlicer as the default application to open 3MF files." msgstr "Gaituta badago, OrcaSlicer ezarriko da 3MF fitxategiak irekitzeko aplikazio lehenetsi gisa." msgid "Associate DRC files to OrcaSlicer" msgstr "Lotu DRC fitxategiak OrcaSlicer-ekin" msgid "If enabled, sets OrcaSlicer as default application to open DRC files." msgstr "Gaituta badago, OrcaSlicer ezarriko da DRC fitxategiak irekitzeko aplikazio lehenetsi gisa." msgid "Associate STL files to OrcaSlicer" msgstr "Lotu STL fitxategiak OrcaSlicer-ekin" msgid "If enabled, this sets OrcaSlicer as the default application to open STL files." msgstr "Gaituta badago, OrcaSlicer ezarriko da STL fitxategiak irekitzeko aplikazio lehenetsi gisa." msgid "Associate STEP files to OrcaSlicer" msgstr "Lotu STEP fitxategiak OrcaSlicer-ekin" msgid "If enabled, this sets OrcaSlicer as the default application to open STEP files." msgstr "Gaituta badago, OrcaSlicer ezarriko da STEP fitxategiak irekitzeko aplikazio lehenetsi gisa." msgid "Associate web links to OrcaSlicer" msgstr "Esleitu web-estekak OrcaSlicerri" msgid "Developer" msgstr "Garatzailea" msgid "Skip AMS blacklist check" msgstr "Saltatu AMS zerrenda beltzaren egiaztapena" msgid "Show unsupported presets" msgstr "Erakutsi onartzen ez diren aurrezarpenak" msgid "Show incompatible/unsupported presets in the printer and filament dropdown lists. These presets cannot be selected." msgstr "Erakutsi bateraezinak edo onartu gabeak diren aurrezarpenak inprimagailuaren eta filamentuaren goitibeherako zerrendetan. Aurrezarpen hauek ezin dira hautatu." msgid "Experimental Features" msgstr "Ezaugarri esperimentalak" msgid "Keep painted feature after mesh change" msgstr "Mantendu pintatutako eginbidea sarea aldatu ondoren" msgid "" "Attempt to keep painted features (color/seam/support/fuzzy etc.) after changing the object mesh (such as cut/reload from disk/simplify/fix etc.)\n" "Highly experimental! Slow and may create artifact." msgstr "" "Saiatu pintatutako eginbideak (kolorea/jostura/euskarria/gainazal zimurra eta abar) mantentzen objektuaren sarea aldatu ondoren (adibidez, ebaki/diskotik birkargatu/sinplifikatu/konpondu eta abar).\n" "Oso esperimentala! Motela da eta artefaktuak sor ditzake." msgid "Allow Abnormal Storage" msgstr "Baimendu biltegiratze anormala" msgid "" "This allows the use of Storage that is marked as abnormal by the Printer.\n" "Use at your own risk, can cause issues!" msgstr "" "Honek inprimagailuak anormal gisa markatutako biltegiratzea erabiltzea baimentzen du.\n" "Erabili zure ardurapean; arazoak sor ditzake!" msgid "Log Level" msgstr "Erregistro-maila" msgid "fatal" msgstr "oso larria" msgid "error" msgstr "errore" msgid "warning" msgstr "abisua" msgid "debug" msgstr "arazketa" msgid "trace" msgstr "traza" msgid "Debug" msgstr "Arazketa" msgid "Sync settings" msgstr "Sinkronizatu ezarpenak" msgid "User sync" msgstr "Erabiltzailearen sinkronizazioa" msgid "Preset sync" msgstr "Aurrezarpenen sinkronizazioa" msgid "Preferences sync" msgstr "Hobespenen sinkronizazioa" msgid "Enable SSL(MQTT)" msgstr "Gaitu SSL (MQTT)" msgid "Enable SSL(FTP)" msgstr "Gaitu SSL (FTP)" msgid "Internal developer mode" msgstr "Garatzailearen barne-modua" msgid "Host Setting" msgstr "Ostalariaren ezarpenak" msgid "DEV host: api-dev.bambu-lab.com/v1" msgstr "DEV ostalaria: api-dev.bambu-lab.com/v1" msgid "QA host: api-qa.bambu-lab.com/v1" msgstr "QA ostalaria: api-qa.bambu-lab.com/v1" msgid "PRE host: api-pre.bambu-lab.com/v1" msgstr "PRE ostalaria: api-pre.bambu-lab.com/v1" msgid "Product host" msgstr "Produktuaren ostalaria" msgid "Debug save button" msgstr "Arazketa gordetzeko botoia" msgid "Save debug settings" msgstr "Gorde arazketa-ezarpenak" msgid "Debug settings have been saved successfully!" msgstr "Arazketa-ezarpenak behar bezala gorde dira!" msgid "Cloud environment switched; please login again!" msgstr "Hodeiko ingurunea aldatu da; hasi saioa berriro!" msgid "System presets" msgstr "Sistemaren aurrezarpenak" msgid "User presets" msgstr "Erabiltzailearen aurrezarpenak" msgid "Incompatible presets" msgstr "Aurrezarpen bateraezinak" msgid "My Printer" msgstr "Nire inprimagailua" msgid "AMS filaments" msgstr "AMS filamentuak" msgid "Left filaments" msgstr "Ezkerreko filamentuak" msgid "AMS filament" msgstr "AMS filamentua" msgid "Right filaments" msgstr "Eskuineko filamentuak" msgid "Click to select filament color" msgstr "Egin klik filamentuaren kolorea hautatzeko" msgid "Add/Remove presets" msgstr "Gehitu/Kendu aurrezarpenak" msgid "Edit preset" msgstr "Editatu aurrezarpena" msgid "Change extruder color" msgstr "Aldatu estrusorearen kolorea" msgid "Unspecified" msgstr "Zehaztu gabe" msgid "Project-inside presets" msgstr "Proiektu barruko aurrezarpenak" msgid "Bundle presets" msgstr "Bildu aurrezarpenak" msgid "System" msgstr "Sistema" msgid "Unsupported presets" msgstr "Onartzen ez diren aurrezarpenak" msgid "Unsupported" msgstr "Ez da onartzen" msgid "Add/Remove filament" msgstr "Gehitu/kendu filamentua" msgid "Add/Remove materials" msgstr "Gehitu/Kendu materialak" msgid "Select/Remove printers (system presets)" msgstr "Hautatu/Kendu inprimagailuak (sistemaren aurrezarpenak)" msgid "Create printer" msgstr "Sortu inprimagailua" msgid "Incompatible" msgstr "Bateraezina" msgid "The selected preset is null!" msgstr "Hautatutako aurrezarpena hutsa da!" # AI Translated msgctxt "Layer range" msgid "End" msgstr "Amaiera" msgid "Customize" msgstr "Pertsonalizatu" msgid "Other layer filament sequence" msgstr "Beste geruzen filamentuen sekuentzia" msgid "Please input layer value (>= 2)." msgstr "Sartu geruzaren balioa (>= 2)." msgid "Plate name" msgstr "Plakaren izena" msgid "Same as Global Plate Type" msgstr "Plaka mota globalaren berdina" msgid "Bed type" msgstr "Ohe mota" msgid "Same as Global Print Sequence" msgstr "Inprimatze-sekuentzia globalaren berdina" msgid "Print sequence" msgstr "Inprimatze-sekuentzia" msgid "Same as Global" msgstr "Globalaren berdina" msgid "Disable" msgstr "Desgaitu" msgid "Spiral vase" msgstr "Espiral formako loreontzia" msgid "First layer filament sequence" msgstr "Lehen geruzako filamentuen sekuentzia" msgid "By Layer" msgstr "Geruzaren arabera" msgid "By Object" msgstr "Objektuaren arabera" msgid "Accept" msgstr "Onartu" msgid "Log Out" msgstr "Amaitu saioa" msgid "Slice all plates to obtain time and filament estimation" msgstr "Xerratu plaka guztiak denboraren eta filamentuen estimazioa lortzeko" msgid "Packing project data into 3MF file" msgstr "Proiektuaren datuak 3MF fitxategian paketatzen" msgid "Uploading 3MF" msgstr "3MF igotzen" msgid "Jump to model publish web page" msgstr "Joan modeloa argitaratzeko web-orrira" msgid "Note: The preparation may take several minutes. Please be patient." msgstr "Oharra: prestaketak minutu batzuk iraun ditzake. Izan pazientzia." msgid "Publish" msgstr "Argitaratu" msgid "Publish was canceled" msgstr "Argitaratzea bertan behera utzi da" msgid "Slicing Plate 1" msgstr "1. plaka xerratzen" msgid "Packing data to 3MF" msgstr "Datuak 3MFra paketatzen" msgid "Uploading data" msgstr "Datuak igotzen" msgid "Jump to webpage" msgstr "Joan web-orrira" #, c-format, boost-format msgid "Save %s as" msgstr "Gorde %s honela" msgid "User Preset" msgstr "Erabiltzailearen aurrezarpena" msgid "Preset Inside Project" msgstr "Proiektu barruko aurrezarpena" msgid "Detach from parent" msgstr "Bereizi gurasotik" msgid "Name is unavailable." msgstr "Izena ez dago erabilgarri." msgid "Overwriting a system profile is not allowed." msgstr "Ezin da sistemaren profila gainidatzi." #, boost-format msgid "Preset \"%1%\" already exists." msgstr "\"%1%\" aurrezarpena badago lehendik." #, boost-format msgid "Preset \"%1%\" already exists and is incompatible with the current printer." msgstr "\"%1%\" aurrezarpena badago lehendik eta ez da bateragarria uneko inprimagailuarekin." msgid "Please note that saving will overwrite the current preset." msgstr "Kontuan izan gordetzeak uneko aurrezarpena gainidatziko duela." msgid "The name cannot be the same as a preset alias name." msgstr "Izena ezin da aurrezarpen baten alias-izenaren berdina izan." msgid "Save preset" msgstr "Gorde aurrezarpena" msgctxt "PresetName" msgid "Copy" msgstr "Kopiatu" #, boost-format msgid "Printer \"%1%\" is selected with preset \"%2%\"" msgstr "\"%1%\" inprimagailua \"%2%\" aurrezarpenarekin hautatu da" #, boost-format msgid "Please choose an action with \"%1%\" preset after saving." msgstr "Aukeratu ekintza bat \"%1%\" aurrezarpenarekin gorde ondoren." #, boost-format msgid "For \"%1%\", change \"%2%\" to \"%3%\" " msgstr "\"%1%\"(e)n, aldatu \"%2%\" eta jarri \"%3%\" " #, boost-format msgid "For \"%1%\", add \"%2%\" as a new preset" msgstr "\"%1%\"(e)n, gehitu \"%2%\" aurrezarpen berri gisa" #, boost-format msgid "Simply switch to \"%1%\"" msgstr "Aldatu \"%1%\"(e)ra soilik" msgid "Task canceled" msgstr "Zeregina bertan behera utzi da" msgid "Bambu Cool Plate" msgstr "Bambu plaka hotza" msgid "PLA Plate" msgstr "PLA plaka" msgid "Bambu Engineering Plate" msgstr "Bambu ingeniaritza-plaka" msgid "Bambu Smooth PEI Plate" msgstr "Bambu PEI plaka leuna" msgid "High temperature Plate" msgstr "Tenperatura altuko plaka" msgid "Bambu Textured PEI Plate" msgstr "Bambu testuradun PEI plaka" msgid "Bambu Cool Plate SuperTack" msgstr "Bambu SuperTack Plaka hotza" msgid "Send print job" msgstr "Bidali inprimatze-lana" msgid "Not satisfied with the grouping of filaments? Regroup and slice ->" msgstr "Ez zaude pozik filamentuen multzokatzearekin? Multzokatu berriro eta xerratu ->" msgid "Manually change external spool during printing for multi-color printing" msgstr "Aldatu eskuz kanpoko bobina inprimatzean kolore anitzeko inprimaketarako" msgid "Multi-color with external" msgstr "Kolore anitzekoa kanpokoarekin" msgid "Your filament grouping method in the sliced file is not optimal." msgstr "Xerratutako fitxategiko filamentuen taldekatze-metodoa ez da egokiena." msgid "To ensure print quality, the drying temperature will be lowered during printing." msgstr "Inprimatze-kalitatea bermatzeko, lehortze-tenperatura jaitsi egingo da inprimatze-prozesuan zehar." # AI Translated msgid "Select timelapse storage location" msgstr "Hautatu timelapsearen biltegiratze-kokapena" msgid "Auto Bed Leveling" msgstr "Ohearen nibelatze automatikoa" msgid "" "This checks the flatness of heatbed. Leveling makes extruded height uniform.\n" "*Automatic mode: Run a leveling check(about 10 seconds). Skip if surface is fine." msgstr "" "Honek ohe beroaren lautasuna egiaztatzen du. Nibelatzeak estrusio-altuera uniformea izatea eragiten du.\n" "*Modu automatikoa: egin nibelatze-egiaztapen bat (10 segundo inguru). Saltatu gainazala ondo badago." msgid "Flow Dynamics Calibration" msgstr "Fluxu-dinamikaren kalibrazioa" msgid "" "This process determines the dynamic flow values to improve overall print quality.\n" "*Automatic mode: Skip if the filament was calibrated recently." msgstr "" "Prozesu honek fluxu dinamikoaren balioak zehazten ditu inprimatze-kalitate orokorra hobetzeko.\n" "*Modu automatikoa: saltatu filamentua duela gutxi kalibratu bada." msgid "Nozzle Offset Calibration" msgstr "Pitaren desplazamenduaren kalibrazioa" msgid "" "Calibrate nozzle offsets to enhance print quality.\n" "*Automatic mode: Check for calibration before printing. Skip if unnecessary." msgstr "" "Kalibratu pitaren desplazamenduak inprimatze-kalitatea hobetzeko.\n" "*Modu automatikoa: egiaztatu kalibrazioa inprimatu aurretik. Saltatu beharrezkoa ez bada." # AI Translated msgid "Shared PA Profile" msgstr "PA profil partekatua" # AI Translated msgid "Nozzles and filaments of the same type share the same PA profile." msgstr "Mota bereko pitek eta filamentuek PA profil bera partekatzen dute." msgid "Send complete" msgstr "Bidalketa osatuta" msgid "Error code" msgstr "Errore-kodea" msgid "Error desc" msgstr "Errorearen azalpena" msgid "Extra info" msgstr "Informazio gehigarria" msgid "The Filament Track Switch installed on the printer does not match the slicing file. Please re-slice to avoid print quality issues." msgstr "Inprimagailuan instalatutako Filament Track Switch-a ez dator bat xerratze-fitxategiarekin. Xerratu berriro inprimatze-kalitateko arazoak saihesteko." msgid "This print requires a Filament Track Switch. Please install it first." msgstr "Inprimaketa honek Filament Track Switch bat behar du. Instalatu lehenik." msgid "The Filament Track Switch has not been setup. Please setup it first." msgstr "Filament Track Switch-a ez da konfiguratu. Konfiguratu lehenik." #, c-format, boost-format msgid "Failed to send nozzle auto-mapping request to printer { code: %d }. Please try to refresh the printer information. If it still does not recover, you can try to rebind the printer and check the network connection." msgstr "Ezin izan zaio pitaren automapeatze-eskaera bidali inprimagailuari { code: %d }. Saiatu inprimagailuaren informazioa freskatzen. Berreskuratzen ez bada, saiatu inprimagailua berriro lotzen eta sare-konexioa egiaztatzen." msgid "The printer is calculating nozzle mapping." msgstr "Inprimagailua piten mapaketa kalkulatzen ari da." msgid "Please wait a moment..." msgstr "Itxaron une batez..." #, c-format, boost-format msgid "Failed to receive nozzle auto-mapping table from printer { msg: %s }. Please refresh the printer information." msgstr "Ezin izan da pitaren automapeatze-taula jaso inprimagailutik { msg: %s }. Freskatu inprimagailuaren informazioa." #, c-format, boost-format msgid "The printer failed to build the nozzle auto-mapping table { code: %d }. Please refresh nozzle information." msgstr "Inprimagailuak ezin izan du pitaren automapeatze-taula sortu { code: %d }. Freskatu pitaren informazioa." #, c-format, boost-format msgid "The current nozzle mapping may produce an extra %0.2f g of waste." msgstr "Uneko pitaren mapaketak %0.2f g hondakin gehigarri sor ditzake." # AI Translated #, c-format, boost-format msgid "Recommended filament arrangement saves %s->" msgstr "Gomendatutako filamentu-antolaketak %s aurrezten du->" #, c-format, boost-format msgid "Filament %s does not match the filament in AMS slot %s. Please update the printer firmware to support AMS slot assignment." msgstr "%s filamentua ez dator bat %s AMS zirrikituko filamentuekin. Eguneratu inprimagailuaren firmwarea AMS zirrikitu-esleipena onartzeko." msgid "Filament does not match the filament in AMS slot. Please update the printer firmware to support AMS slot assignment." msgstr "Filamentua ez dator bat AMS zirrikituko filamentuekin. Eguneratu inprimagailuaren firmwarea AMS zirrikitu-esleipena onartzeko." #, c-format, boost-format msgid "The selected printer (%s) is incompatible with the print file configuration (%s). Please adjust the printer preset in the prepare page or choose a compatible printer on this page." msgstr "Hautatutako inprimagailua (%s) ez da bateragarria inprimatze-fitxategiaren konfigurazioarekin (%s). Doitu inprimagailuaren aurrezarpena Prestatu orrian edo hautatu inprimagailu bateragarri bat orri honetan." msgid "When spiral vase mode is enabled, machines with I3 structure will not generate timelapse videos." msgstr "Espiral formako loreontziaren modua gaituta dagoenean, I3 egitura duten makinek ez dute timelapse bideorik sortuko." msgid "The current printer does not support timelapse in Traditional Mode when printing By-Object." msgstr "Uneko inprimagailuak ez du timelapsea onartzen Modu tradizionalean objektuz objektu inprimatzean." # AI Translated msgid "I have checked the installed nozzle and want to print anyway." msgstr "Instalatutako pita egiaztatu dut eta hala ere inprimatu nahi dut." msgid "Errors" msgstr "Erroreak" msgid "More than one filament types have been mapped to the same external spool, which may cause printing issues. The printer won't pause during printing." msgstr "Filamentu mota bat baino gehiago kanpoko bobina berera mapatu da, eta horrek inprimatze-arazoak sor ditzake. Inprimagailua ez da geldituko inprimatzean." msgid "The filament type setting of external spool is different from the filament in the slicing file." msgstr "Kanpoko bobinaren filamentu motaren ezarpena ez dator bat xerratze-fitxategiko filamentuarekin." msgid "The printer type selected when generating G-code is not consistent with the currently selected printer. It is recommended that you use the same printer type for slicing." msgstr "G-codea sortzean hautatutako inprimagailu mota ez dator bat unean hautatutako inprimagailuarekin. Xerratzeko erabilitako inprimagailu mota bera erabiltzea gomendatzen da." msgid "There are some unknown filaments in the AMS mappings. Please check whether they are the required filaments. If they are okay, click \"Confirm\" to start printing." msgstr "AMS mapaketetan filamentuen artean ezezagun batzuk daude. Egiaztatu behar diren filamentuak diren. Zuzenak badira, egin klik \"Berretsi\" aukeran inprimatzen hasteko." msgid "Please check the following:" msgstr "Egiaztatu honako hau:" msgid "Please fix the error above, otherwise printing cannot continue." msgstr "Konpondu goiko errorea; bestela, inprimaketak ezin izango du jarraitu." msgid "Please click the confirm button if you still want to proceed with printing." msgstr "Egin klik berresteko botoian inprimatzen jarraitu nahi baduzu." msgid "This checks the flatness of heatbed. Leveling makes extruded height uniform." msgstr "Honek ohe beroaren lautasuna egiaztatzen du. Nibelatzeak estrusio-altuera uniformea izatea eragiten du." msgid "This process determines the dynamic flow values to improve overall print quality." msgstr "Prozesu honek fluxu dinamikoaren balioak zehazten ditu inprimatze-kalitate orokorra hobetzeko." msgid "Internal" msgstr "Barrukoa" # AI Translated #, c-format, boost-format msgid "%s space less than 20MB. Timelapse may not save properly. You can turn it off or" msgstr "%s espazioa 20MB baino gutxiago. Baliteke timelapsea behar bezala ez gordetzea. Desaktibatu dezakezu edo" # AI Translated msgid "Clean up files" msgstr "Garbitu fitxategiak" # AI Translated msgid "Low internal storage. This timelapse will overwrite the oldest video files." msgstr "Barne-biltegiratze gutxi. Timelapse honek bideo-fitxategi zaharrenak gainidatziko ditu." # AI Translated msgid "Low external storage. This timelapse will overwrite the oldest video files." msgstr "Kanpoko biltegiratze gutxi. Timelapse honek bideo-fitxategi zaharrenak gainidatziko ditu." # AI Translated msgid "Insufficient external storage for time-lapse photography. Connect to computer to delete files, or use a larger memory card." msgstr "Kanpoko biltegiratze nahikorik ez timelapse argazkigintzarako. Konektatu ordenagailura fitxategiak ezabatzeko, edo erabili memoria-txartel handiago bat." # AI Translated msgid "Storage Space Not Enough" msgstr "Biltegiratze-espazio nahikorik ez" # AI Translated msgid "Confirm & Print" msgstr "Berretsi eta inprimatu" # AI Translated msgid "Cancel Timelapse & Print" msgstr "Utzi timelapsea eta inprimatu" # AI Translated msgid "Clean Up" msgstr "Garbitu" msgid "Preparing print job" msgstr "Inprimatze-lana prestatzen" msgid "The name length exceeds the limit." msgstr "Izenaren luzerak muga gainditzen du." #, c-format, boost-format msgid "Cost %dg filament and %d changes more than optimal grouping." msgstr "Taldekatze optimoak baino %d g filamentu gehiago eta %d aldaketa gehiago kostatzen ditu." msgid "nozzle" msgstr "pita" #, c-format, boost-format msgid "Refreshing information of hotends(%d/%d)." msgstr "Hotenden informazioa freskatzen (%d/%d)." msgid "There are not enough available hotends currently." msgstr "Une honetan ez dago nahikoa hotend erabilgarri." msgid "Please complete the hotend rack setup and try again." msgstr "Osatu hotend-euskarriaren konfigurazioa eta saiatu berriro." msgid "Please refresh the nozzle information and try again." msgstr "Freskatu pitaren informazioa eta saiatu berriro." msgid "Please re-slice to avoid filament waste." msgstr "Xerratu berriro filamentua ez alferrik galtzeko." msgid "The reported hotend information may be unreliable." msgstr "Baliteke jakinarazitako hotend-informazioa fidagarria ez izatea." #, c-format, boost-format msgid "The printer has no nozzle matching the slicing file (%s)." msgstr "Inprimagailuak ez du xerratze-fitxategiarekin bat datorren pitarik (%s)." msgid "Please install a matching nozzle in the hotend rack, or set the corresponding printer preset while slicing." msgstr "Instalatu bat datorren pita bat hotend-euskarrian, edo ezarri dagokion inprimagailu-aurrezarpena xerratzean." msgid "The toolhead and hotend rack are full. Please remove at least one hotend before printing." msgstr "Inprimatze-burua eta hotend-euskarria beteta daude. Kendu gutxienez hotend bat inprimatu aurretik." #, c-format, boost-format msgid "The nozzle flow setting of %s(%s) doesn't match with the slicing file(%s). Please make sure the nozzle installed matches with settings in printer, then set the corresponding printer preset while slicing." msgstr "%s(%s) pitaren fluxu-ezarpena ez dator bat xerratze-fitxategikoarekin (%s). Egiaztatu instalatutako pita inprimagailuko ezarpenekin bat datorrela, eta hautatu dagokion inprimagailu-aurrezarpena xerratzean." msgid "Tips: If you changed your nozzle of your printer lately, please go to 'Device -> Printer parts' to change your nozzle setting." msgstr "Aholkua: duela gutxi inprimagailuaren pita aldatu baduzu, joan 'Gailua -> Inprimagailuaren piezak' atalera pitaren ezarpena aldatzeko." #, c-format, boost-format msgid "The %s diameter(%.1fmm) of current printer doesn't match with the slicing file (%.1fmm). Please make sure the nozzle installed matches with settings in printer, then set the corresponding printer preset when slicing." msgstr "Uneko inprimagailuaren %s diametroa (%.1f mm) ez dator bat xerratze-fitxategikoarekin (%.1f mm). Egiaztatu instalatutako pita inprimagailuko ezarpenekin bat datorrela, eta hautatu dagokion inprimagailu-aurrezarpena xerratzean." #, c-format, boost-format msgid "The current nozzle diameter (%.1fmm) doesn't match with the slicing file (%.1fmm). Please make sure the nozzle installed matches with settings in printer, then set the corresponding printer preset when slicing." msgstr "Uneko pitaren diametroa (%.1f mm) ez dator bat xerratze-fitxategikoarekin (%.1f mm). Egiaztatu instalatutako pita inprimagailuko ezarpenekin bat datorrela, eta hautatu dagokion inprimagailu-aurrezarpena xerratzean." msgid "both extruders" msgstr "bi estrusoreak" #, c-format, boost-format msgid "The hardness of current material (%s) exceeds the hardness of %s(%s). Please verify the nozzle or material settings and try again." msgstr "Uneko materialaren gogortasunak (%s) %s(%s)-ren gogortasuna gainditzen du. Egiaztatu pitaren edo materialaren ezarpenak eta saiatu berriro." # AI Translated msgid "Your current firmware version cannot start this print job. Please update to the latest version and try again." msgstr "Zure uneko firmware bertsioak ezin du inprimatze-lan hau hasi. Eguneratu azken bertsiora eta saiatu berriro." #, c-format, boost-format msgid "The hardness of current material (%s) exceeds the hardness of %s(%s). It may cause nozzle wear, leading to material leakage and unstable flow. Please exercise caution when using it." msgstr "Uneko materialaren gogortasunak (%s) %s(%s)-ren gogortasuna gainditzen du. Horrek pita higatu, material-ihesak eragin eta fluxua ezegonkortu dezake. Kontuz erabili." # AI Translated msgid "Some filaments may switch between extruders during printing. Manual K-value calibration cannot be applied throughout the entire print, which may affect print quality. Enabling Flow Dynamics Calibration is recommended." msgstr "Filamentu batzuk estrusoreen artean alda daitezke inprimatzen ari den bitartean. Eskuzko K-balioaren kalibrazioa ezin da inprimaketa osoan zehar aplikatu, eta horrek inprimatze-kalitatea okertu dezake. Fluxu Dinamikaren Kalibrazioa gaitzea gomendatzen da." # AI Translated msgid "There is stringing-prone filament in this file. For best print quality, we recommend switching nozzle clumping detection to Auto mode." msgstr "Fitxategi honetan harilkatzeko joera duen filamentua dago. Inprimatze-kalitate onena lortzeko, pitako material-metaketaren detekzioa Auto modura aldatzea gomendatzen dugu." # AI Translated msgid "If 'Dynamic Flow Calibration' is set to Auto/On, the system will use the manual calibration value or the default value and skip the flow calibration process. You can perform a manual flow calibration for TPU filament on the 'Calibration' page." msgstr "'Fluxu Dinamikoaren Kalibrazioa' Auto/On ezarrita badago, sistemak eskuzko kalibrazio-balioa edo balio lehenetsia erabiliko du eta fluxu-kalibrazioaren prozesua saltatuko du. TPU filamenturako eskuzko fluxu-kalibrazioa egin dezakezu 'Kalibrazioa' orrian." #, c-format, boost-format msgid "[ %s ] requires printing in a high-temperature environment. Please close the door." msgstr "[ %s ] materialak tenperatura altuko ingurune batean inprimatzea eskatzen du. Itxi atea." #, c-format, boost-format msgid "[ %s ] requires printing in a high-temperature environment." msgstr "[ %s ] materialak tenperatura altuko ingurune batean inprimatzea eskatzen du." #, c-format, boost-format msgid "The filament on %s may soften. Please unload." msgstr "%s-ko filamentua bigundu daiteke. Deskargatu." #, c-format, boost-format msgid "The filament on %s is unknown and may soften. Please set filament." msgstr "%s-ko filamentua ezezaguna da eta bigundu daiteke. Ezarri filamentua." msgid "Unable to automatically match to suitable filament. Please click to manually match." msgstr "Ezin izan da automatikoki filamentu egokiarekin parekatu. Egin klik eskuz parekatzeko." msgid "Install toolhead enhanced cooling fan to prevent filament softening." msgstr "Instalatu inprimatze-bururako hozte-haizagailu hobetua filamentuaren biguntzea saihesteko." msgid "Smooth Cool Plate" msgstr "Plaka hotz leuna" msgid "Engineering Plate" msgstr "Ingeniaritza-plaka" msgid "Smooth High Temp Plate" msgstr "Tenperatura alturako plaka leuna" msgid "Textured PEI Plate" msgstr "Testuradun PEI plaka" msgid "Cool Plate (SuperTack)" msgstr "Plaka hotza (SuperTack)" msgid "Click here if you can't connect to the printer" msgstr "Egin klik hemen inprimagailura konektatu ezin baduzu" msgid "No login account, only printers in LAN mode are displayed." msgstr "Ez dago saioa hasitako konturik; LAN moduko inprimagailuak soilik erakusten dira." msgid "Connecting to server..." msgstr "Zerbitzarira konektatzen..." msgid "Synchronizing device information..." msgstr "Gailuaren informazioa sinkronizatzen..." msgid "Synchronizing device information timed out." msgstr "Gailuaren informazioa sinkronizatzeko denbora agortu da." msgid "Cannot send a print job when the printer is not at FDM mode." msgstr "Ezin da inprimatze-lanik bidali inprimagailua FDM moduan ez dagoenean." msgid "Cannot send a print job while the printer is updating firmware." msgstr "Ezin da inprimatze-lanik bidali inprimagailua firmwarea eguneratzen ari den bitartean." msgid "The printer is executing instructions. Please restart printing after it ends." msgstr "Inprimagailua aginduak exekutatzen ari da. Berrabiarazi inprimaketa amaitu ondoren." msgid "AMS is setting up. Please try again later." msgstr "AMS konfiguratzen ari da. Saiatu berriro geroago." msgid "Not all filaments used in slicing are mapped to the printer. Please check the mapping of filaments." msgstr "Xerratzean erabilitako filamentu guztiak ez daude inprimagailuarekin mapatuta. Egiaztatu filamentuen mapaketa." msgid "Please do not mix-use the Ext with AMS." msgstr "Ez erabili kanpoko filamentu-iturria eta AMSa batera." msgid "Invalid nozzle information, please refresh or manually set nozzle information." msgstr "Pitaren informazioa ez da baliozkoa; freskatu edo ezarri eskuz pitaren informazioa." msgid "Storage needs to be inserted before printing via LAN." msgstr "Biltegiratze-gailua sartu behar da LAN bidez inprimatu aurretik." msgid "Storage is in abnormal state or is in read-only mode." msgstr "Biltegiratzea egoera anormalean dago edo irakurtzeko soilik moduan dago." msgid "Storage needs to be inserted before printing." msgstr "Biltegiratze-gailua sartu behar da inprimatu aurretik." msgid "Cannot send the print job to a printer whose firmware must be updated." msgstr "Ezin zaio inprimatze-lana bidali firmwarea eguneratu behar duen inprimagailu bati." msgid "Cannot send a print job for an empty plate." msgstr "Ezin da inprimatze-lanik bidali plaka huts baterako." msgid "Storage needs to be inserted to record timelapse." msgstr "Biltegiratze-gailua sartu behar da timelapsea grabatzeko." msgid "You have selected both external and AMS filaments for an extruder. You will need to manually switch the external filament during printing." msgstr "Estrusore baterako kanpoko filamentua eta AMSko filamentua hautatu dituzu. Kanpoko filamentua eskuz aldatu beharko duzu inprimatzean." msgid "TPU 90A/TPU 85A is too soft and does not support automatic Flow Dynamics calibration." msgstr "TPU 90A/TPU 85A bigunegia da eta ez du fluxu-dinamikaren kalibrazio automatikoa onartzen." msgid "Set dynamic flow calibration to 'OFF' to enable custom dynamic flow value." msgstr "Ezarri fluxu dinamikoaren kalibrazioa 'DESAKTIBATUTA' moduan fluxu dinamiko pertsonalizatuaren balioa gaitzeko." msgid "This printer does not support printing all plates." msgstr "Inprimagailu honek ez du plaka guztiak inprimatzea onartzen." # AI Translated #, c-format, boost-format msgid "The current firmware supports a maximum of %s materials. You can either reduce the number of materials to %s or fewer on the Preparation Page, or try updating the firmware. If you are still restricted after the update, please wait for subsequent firmware support." msgstr "Uneko firmwareak gehienez %s material onartzen ditu. Materialen kopurua %s edo gutxiagora murritz dezakezu Prestaketa Orrian, edo saiatu firmwarea eguneratzen. Eguneratu ondoren oraindik mugatuta bazaude, itxaron hurrengo firmware euskarriari." msgid "The type of external filament is unknown or does not match with the filament type in the slicing file. Please make sure you have installed the correct filament in the external spool." msgstr "Kanpoko filamentuaren mota ezezaguna da edo ez dator bat xerratze-fitxategiko filamentu motarekin. Egiaztatu kanpoko harilean filamentu zuzena instalatu duzula." # AI Translated msgid "TPU 90A/TPU 85A are too soft. It is recommended to perform manual flow calibration on the 'Calibration' page. If 'Dynamic Flow Calibration' is set to auto/on, the system will use the previous calibration value and skip the flow calibration process." msgstr "TPU 90A/TPU 85A bigunegiak dira. Eskuzko fluxu-kalibrazioa 'Kalibrazioa' orrian egitea gomendatzen da. 'Fluxu Dinamikoaren Kalibrazioa' auto/on ezarrita badago, sistemak aurreko kalibrazio-balioa erabiliko du eta fluxu-kalibrazioaren prozesua saltatuko du." # AI Translated msgid "The filament in the AMS may be insufficient for this print. Please refill or replace it." msgstr "Baliteke AMSko filamentua nahikoa ez izatea inprimaketa honetarako. Bete berriro edo ordeztu ezazu." msgid "Current firmware does not support file transfer to internal storage." msgstr "Uneko firmwareak ez du onartzen fitxategiak barne-biltegiratzera transferitzerik." msgid "Send to Printer storage" msgstr "Bidali inprimagailuaren biltegira" msgid "Try to connect" msgstr "Saiatu konektatzen" msgid "Internal Storage" msgstr "Barne-biltegiratze gailua" msgid "External Storage" msgstr "Kanpo-biltegiratze gailua" msgid "Upload file timeout, please check if the firmware version supports it." msgstr "Fitxategia igotzeko denbora agortu da; egiaztatu firmwarearen bertsioak onartzen duen." msgid "Connection timed out, please check your network." msgstr "Konexioaren denbora agortu da; egiaztatu sarea." msgid "Connection failed. Click the icon to retry" msgstr "Konexioak huts egin du. Egin klik ikonoan berriro saiatzeko" msgid "Cannot send print tasks when an update is in progress" msgstr "Ezin dira inprimatze-lanak bidali eguneraketa bat abian dagoenean" msgid "The selected printer is incompatible with the chosen printer presets." msgstr "Hautatutako inprimagailua ez da bateragarria aukeratutako inprimagailu-aurrezarpenekin." msgid "Storage needs to be inserted before send to printer." msgstr "Biltegiratze-gailua sartu behar da inprimagailura bidali aurretik." msgid "The printer is required to be on the same LAN as Orca Slicer." msgstr "Inprimagailuak OrcaSlicer-en LAN berean egon behar du." msgid "The printer does not support sending to printer storage." msgstr "Inprimagailuak ez du onartzen bere biltegira bidaltzea." msgid "Sending..." msgstr "Bidaltzen..." msgid "File upload timed out. Please check if the firmware version supports this operation or verify if the printer is functioning properly." msgstr "Fitxategia igotzeko denbora agortu da. Egiaztatu firmwarearen bertsioak eragiketa hau onartzen duen edo inprimagailua behar bezala dabilen." msgid "Sending failed, please try again!" msgstr "Bidalketak huts egin du; saiatu berriro!" msgid "Slice complete" msgstr "Xerratzea osatuta" msgid "View all Daily tips" msgstr "Ikusi eguneko aholku guztiak" msgid "Failed to create socket" msgstr "Socketa sortzeak huts egin du" msgid "Failed to connect socket" msgstr "Socketera konektatzeak huts egin du" msgid "Failed to publish login request" msgstr "Saioa hasteko eskaera argitaratzeak huts egin du" msgid "Timeout getting ticket from device" msgstr "Gailutik txartela eskuratzeko denbora agortu da" msgid "Timeout getting ticket from server" msgstr "Zerbitzaritik txartela eskuratzeko denbora agortu da" msgid "Failed to post ticket to server" msgstr "Ticketa zerbitzarira bidaltzeak huts egin du" msgid "Failed to parse login report reason" msgstr "Saio-hasieraren txostenaren arrazoia analizatzeak huts egin du" msgid "Receive login report timeout" msgstr "Saio-hasieraren txostena jasotzeko denbora agortu da" msgid "Unknown Failure" msgstr "Hutsegite ezezaguna" msgid "" "Please Find the Pin Code in Account page on printer screen,\n" " and type in the Pin Code below." msgstr "" "Bilatu PIN kodea inprimagailuaren pantailako Kontua orrian,\n" " eta idatzi PIN kodea behean." msgid "Can't find Pin Code?" msgstr "Ezin duzu PIN kodea aurkitu?" msgid "Pin Code" msgstr "PIN kodea" msgid "Binding..." msgstr "Lotzen..." msgid "Please confirm on the printer screen" msgstr "Berretsi inprimagailuaren pantailan" msgid "Log in failed. Please check the Pin Code." msgstr "Saioa hasteak huts egin du. Egiaztatu PIN kodea." msgid "Log in printer" msgstr "Hasi saioa inprimagailuan" msgid "Would you like to log in to this printer with the current account?" msgstr "Inprimagailu honetan uneko kontuarekin saioa hasi nahi duzu?" msgid "Check the reason" msgstr "Egiaztatu arrazoia" msgid "Read and accept" msgstr "Irakurri eta onartu" msgid "Terms and Conditions" msgstr "Baldintzak eta betekizunak" msgid "Thank you for purchasing a Bambu Lab device. Before using your Bambu Lab device, please read the terms and conditions. By clicking to agree to use your Bambu Lab device, you agree to abide by the Privacy Policy and Terms of Use (collectively, the \"Terms\"). If you do not comply with or agree to the Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services." msgstr "Eskerrik asko Bambu Lab gailu bat erosteagatik. Bambu Lab gailua erabili aurretik, irakurri baldintzak. Bambu Lab gailua erabiltzea onartzeko klik eginez, Pribatutasun Politika eta Erabilera Baldintzak (\"Baldintzak\") betetzea onartzen duzu. Bambu Lab Pribatutasun Politika betetzen edo onartzen ez baduzu, ez erabili Bambu Lab ekipamendurik eta zerbitzurik." msgid "and" msgstr "eta" msgid "Privacy Policy" msgstr "Pribatutasun-politika" msgid "We ask for your help to improve everyone's printer" msgstr "Guztion inprimagailua hobetzen laguntzeko eskatzen dizugu" msgid "Statement about User Experience Improvement Program" msgstr "Erabiltzaile-esperientzia hobetzeko programari buruzko adierazpena" #, c-format, boost-format msgid "In the 3D Printing community, we learn from each other's successes and failures to adjust our own slicing parameters and settings. %s follows the same principle and uses machine learning to improve its performance from the successes and failures of the vast number of prints by our users. We are training %s to be smarter by feeding them the real-world data. If you are willing, this service will access information from your error logs and usage logs, which may include information described in Privacy Policy. We will not collect any Personal Data by which an individual can be identified directly or indirectly, including without limitation names, addresses, payment information, or phone numbers. By enabling this service, you agree to these terms and the statement about Privacy Policy." msgstr "3D inprimaketaren komunitatean, elkarren arrakastetatik eta hutsegiteetatik ikasten dugu gure xerratze-parametroak eta ezarpenak doitzeko. %s-k printzipio bera jarraitzen du eta ikaskuntza automatikoa erabiltzen du gure erabiltzaileen inprimaketa ugarien arrakasta eta hutsegiteetatik bere errendimendua hobetzeko. %s adimentsuagoa izateko entrenatzen ari gara mundu errealeko datuak emanez. Nahi baduzu, zerbitzu honek zure errore-erregistroetako eta erabilera-erregistroetako informazioa atzituko du, Pribatutasun Politikan deskribatutako informazioa barne izan dezakeena. Ez dugu bilduko pertsona bat zuzenean edo zeharka identifikatzeko moduko datu pertsonalik, besteak beste izenak, helbideak, ordainketa-informazioa edo telefono-zenbakiak. Zerbitzu hau gaitzean, baldintza hauek eta Pribatutasun Politikaren adierazpena onartzen dituzu." msgid "Statement on User Experience Improvement Plan" msgstr "Erabiltzaile-esperientzia hobetzeko planari buruzko adierazpena" msgid "Log in successful." msgstr "Saioa behar bezala hasi da." msgid "Log out printer" msgstr "Amaitu inprimagailuko saioa" msgid "Would you like to log out the printer?" msgstr "Inprimagailutik saioa amaitu nahi duzu?" msgid "Please log in first." msgstr "Hasi saioa lehenik." msgid "There was a problem connecting to the printer. Please try again." msgstr "Arazo bat egon da inprimagailura konektatzean. Saiatu berriro." msgid "Failed to log out." msgstr "Saioa amaitzeak huts egin du." #. TRN "Save current Settings" #, c-format, boost-format msgid "Save current %s" msgstr "Gorde uneko %s" msgid "Delete this preset" msgstr "Ezabatu aurrezarpen hau" msgid "Search in preset" msgstr "Bilatu aurrezarpenean" msgid "Synchronization of different extruder drives or nozzle volume types is not supported." msgstr "Ez da onartzen estrusore-eragile desberdinak edo pita-bolumen mota desberdinak sinkronizatzea." msgid "Synchronize the modification of parameters to the corresponding parameters of another extruder." msgstr "Sinkronizatu parametroen aldaketak beste estrusoreko parametro baliokideekin." msgid "Click to reset all settings to the last saved preset." msgstr "Egin klik ezarpen guztiak azken aurrezarpen gordera berrezartzeko." msgid "Prime tower is required for nozzle changing. There may be flaws on the model without prime tower. Are you sure you want to disable prime tower?" msgstr "Purgatze-dorrea behar da pita aldatzeko. Modeloak akatsak izan ditzake purgatze-dorrerik gabe. Ziur purgatze-dorrea desgaitu nahi duzula?" msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without a prime tower. Are you sure you want to disable the prime tower?" msgstr "Purgatze-dorrea behar da timelapse leunaren modurako. Modeloak akatsak izan ditzake purgatze-dorrerik gabe. Ziur purgatze-dorrea desgaitu nahi duzula?" msgid "A prime tower is required for clumping detection. There may be flaws on the model without prime tower. Are you sure you want to disable prime tower?" msgstr "Purgatze-dorrea behar da material-metaketa detektatzeko. Modeloak akatsak izan ditzake purgatze-dorrerik gabe. Ziur purgatze-dorrea desgaitu nahi duzula?" msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable?" msgstr "Z altuera zehatza eta purgatze-dorrea batera gaitzeak xerratze-erroreak eragin ditzake. Hala ere gaitu nahi dituzu?" msgid "A prime tower is required for clumping detection. There may be flaws on the model without prime tower. Do you still want to enable clumping detection?" msgstr "Purgatze-dorrea behar da material-metaketa detektatzeko. Modeloak akatsak izan ditzake purgatze-dorrerik gabe. Hala ere, material-metaketa detektatzea gaitu nahi duzu?" msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?" msgstr "Z altuera zehatza eta purgatze-dorrea batera gaitzeak xerratze-erroreak eragin ditzake. Hala ere Z altuera zehatza gaitu nahi duzu?" msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?" msgstr "Purgatze-dorrea behar da timelapse leunaren modurako. Modeloak akatsak izan ditzake purgatze-dorrerik gabe. Purgatze-dorrea gaitu nahi duzu?" msgid "Still print by object?" msgstr "Objektuka inprimatu hala ere?" msgid "" "Non-soluble support materials are not recommended for support base.\n" "Are you sure to use them for support base?\n" msgstr "" "Ez da gomendatzen euskarri-disolbaezinak erabiltzea euskarriaren oinarrian.\n" "Ziur zaude euskarriaren oinarrian erabili nahi dituzula?\n" # AI Translated msgid "" "When using support material for the support interface, we recommend the following settings:\n" "0 top Z distance, 0 interface spacing, interlaced rectilinear pattern and disable independent support layer height." msgstr "" "Euskarri-interfazerako euskarri-materiala erabiltzean, ezarpen hauek gomendatzen ditugu:\n" "goiko Z distantzia 0, interfazearen tartea 0, patroi lerrozuzen tartekatua eta euskarrien geruza-altuera independentea desgaitzea." msgid "" "Change these settings automatically?\n" "Yes - Change these settings automatically.\n" "No - Do not change these settings for me." msgstr "" "Ezarpen hauek automatikoki aldatu?\n" "Bai - Aldatu ezarpen hauek automatikoki.\n" "Ez - Ez aldatu ezarpen hauek." # AI Translated msgid "" "When using soluble material for the support interface, we recommend the following settings:\n" "0 top Z distance, 0 interface spacing, interlaced rectilinear pattern, disable independent support layer height\n" "and use soluble materials for both support interface and support base." msgstr "" "Euskarri-interfazerako material disolbagarria erabiltzean, ezarpen hauek gomendatzen ditugu:\n" "goiko Z distantzia 0, interfazearen tartea 0, patroi lerrozuzen tartekatua, euskarrien geruza-altuera independentea desgaitzea\n" "eta material disolbagarriak erabiltzea bai euskarri-interfazerako bai euskarri-oinarrirako." msgid "Enabling this option will modify the model's shape. If your print requires precise dimensions or is part of an assembly, it's important to double-check whether this change in geometry impacts the functionality of your print." msgstr "Aukera hau gaitzeak modeloaren forma aldatuko du. Zure inprimaketak dimentsio zehatzak behar baditu edo multzo baten parte bada, garrantzitsua da geometriaren aldaketa honek inprimaketaren funtzionaltasunean eragina duen egiaztatzea." msgid "Are you sure you want to enable this option?" msgstr "Ziur aukera hau gaitu nahi duzula?" # AI Translated msgid "Infill patterns are typically designed to handle rotation automatically to ensure proper printing and achieve their intended effects (e.g., Gyroid, Cubic). Rotating the current sparse infill pattern may lead to insufficient support. Please proceed with caution and thoroughly check for any potential printing issues. Are you sure you want to enable this option?" msgstr "Betegarri-patroiak normalean biraketa automatikoki kudeatzeko diseinatuta daude, behar bezala inprimatzeko eta nahi den efektua lortzeko (adibidez, Giroidea edo Kubikoa). Uneko dentsitate baxuko betegarri-patroia biratzeak euskarri eskasa eragin dezake. Kontuz jarraitu eta egiaztatu arretaz inprimatze-arazorik sor daitekeen. Ziur zaude aukera hau gaitu nahi duzula?" msgid "" "Layer height is too small.\n" "It will set to min_layer_height\n" msgstr "" "Geruza-altuera txikiegia da.\n" "min_layer_height baliora ezarriko da\n" msgid "Layer height exceeds the limit in Printer Settings -> Extruder -> Layer height limits, this may cause printing quality issues." msgstr "Geruza-altuerak Inprimagailuaren ezarpenak -> Estrusorea -> Geruza-altueraren mugak ataleko muga gainditzen du; horrek inprimatze-kalitateko arazoak sor ditzake." msgid "Adjust to the set range automatically?\n" msgstr "Doitu automatikoki ezarritako barrutira?\n" msgid "Adjust" msgstr "Doitu" msgid "Experimental feature: Retracting and cutting off the filament at a greater distance during filament changes to minimize flush. Although it can notably reduce flush, it may also elevate the risk of nozzle clogs or other printing complications." msgstr "Funtzio esperimentala: filamentu aldaketetan distantzia handiagoan atzera egitea eta moztea, purgatzea minimizatzeko. Purgatzea nabarmen murriztu dezakeen arren, pitaren buxadurak edo bestelako inprimatze-arazoak izateko arriskua ere handitu dezake." msgid "Experimental feature: Retracting and cutting off the filament at a greater distance during filament changes to minimize flush. Although it can notably reduce flush, it may also elevate the risk of nozzle clogs or other printing complications. Please use with the latest printer firmware." msgstr "Funtzio esperimentala: filamentu aldaketetan distantzia handiagoan atzera egitea eta moztea, purgatzea minimizatzeko. Purgatzea nabarmen murriztu dezakeen arren, pitaren buxadurak edo bestelako inprimatze-arazoak izateko arriskua ere handitu dezake. Erabili inprimagailuaren azken firmwarearekin." msgid "" "When recording timelapse without toolhead, it is recommended to add a \"Timelapse Wipe Tower\" \n" "by right-click the empty position of build plate and choose \"Add Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "Inprimatze-bururik gabeko timelapsea grabatzean, \"Timelapse purgatze-dorrea\" gehitzea gomendatzen da \n" "inprimatze-plakako posizio hutsaren gainean eskuin-klika eginez eta \"Gehitu primitiboa\"->\"Timelapse purgatze-dorrea\" aukeratuz." msgid "A copy of the current system preset will be created, which will be detached from the system preset." msgstr "Uneko sistemako aurrezarpenaren kopia bat sortuko da, sistemako aurrezarpenetik bereizita." msgid "The current custom preset will be detached from the parent system preset." msgstr "Uneko aurrezarpen pertsonalizatua sistemako aurrezarpen gurasotik bereiziko da." msgid "Modifications to the current profile will be saved." msgstr "Uneko profileko aldaketak gordeko dira." msgid "" "This action is not revertible.\n" "Do you want to proceed?" msgstr "" "Ekintza hau ezin da desegin.\n" "Jarraitu nahi duzu?" msgid "Detach preset" msgstr "Bereizi aurrezarpena" msgid "This is a default preset." msgstr "Hau aurrezarpen lehenetsia da." msgid "This is a system preset." msgstr "Hau sistemaren aurrezarpena da." msgid "Current preset is inherited from the default preset." msgstr "Uneko aurrezarpena lehenetsitako aurrezarpenetik jaso da." msgid "Current preset is inherited from" msgstr "Uneko aurrezarpena honako honetatik jaso da:" msgid "It can't be deleted or modified." msgstr "Ezin da ezabatu edo aldatu." msgid "Any modifications should be saved as a new preset inherited from this one." msgstr "Aldaketa guztiak honetatik herentzian hartutako aurrezarpen berri gisa gorde behar dira.." msgid "To do that please specify a new name for the preset." msgstr "Horretarako, zehaztu aurrezarpenaren izen berri bat." msgid "Additional information:" msgstr "Informazio gehigarria:" msgid "vendor" msgstr "hornitzailea" msgid "printer model" msgstr "inprimagailuaren modeloa" msgid "default print profile" msgstr "inprimatze-profil lehenetsia" msgid "default filament profile" msgstr "filamentu-profil lehenetsia" msgid "default SLA material profile" msgstr "SLA material-profil lehenetsia" msgid "default SLA print profile" msgstr "SLA inprimatze-profil lehenetsia" msgid "full profile name" msgstr "profilaren izen osoa" msgid "symbolic profile name" msgstr "profilaren izen sinbolikoa" msgid "Line width" msgstr "Lerro-zabalera" msgid "Precision" msgstr "Zehaztasuna" msgid "Z contouring" msgstr "Z sestra-doikuntza" msgid "Wall generator" msgstr "Horma-sorgailua" msgid "Walls and surfaces" msgstr "Hormak eta gainazalak" msgid "Bridging" msgstr "Zubigintza" msgid "Walls" msgstr "Hormak" msgid "Top/bottom shells" msgstr "Goiko/beheko geruzak" msgid "First layer speed" msgstr "Lehen geruzaren abiadura" msgid "Other layers speed" msgstr "Beste geruzen abiadura" msgid "Overhang speed" msgstr "Irtenguneetako abiadura" msgid "This is the speed for various overhang degrees. Overhang degrees are expressed as a percentage of line width. 0 speed means no slowing down for the overhang degree range and wall speed is used" msgstr "Hau da irtengune-maila desberdinetarako abiadura. Irtengune-mailak lerro-zabaleraren ehuneko gisa adierazten dira. 0 abiadurak esan nahi du ez dela motelduko irtengune-mailaren tarte horretan eta hormaren abiadura erabiliko dela" msgid "Set speed for external and internal bridges" msgstr "Ezarri kanpoko eta barruko zubien abiadura" msgid "Travel speed" msgstr "Lekualdatze-abiadura" msgid "Junction Deviation" msgstr "Lotura-desbideratzea" msgid "Jerk(XY)" msgstr "Astindua (XY)" msgid "Raft" msgstr "Baltsa" msgid "Filament for Supports" msgstr "Euskarrietarako filamentua" msgid "Support ironing" msgstr "Euskarrien lisatzea" msgid "Tree supports" msgstr "Zuhaitz-euskarriak" msgid "Multimaterial" msgstr "Material anitzekoa" msgid "Filament for Features" msgstr "Ezaugarrietarako filamentua" msgid "Ooze prevention" msgstr "Jarioa saihestea" msgid "Special mode" msgstr "Modu berezia" msgid "G-code output" msgstr "G-code irteera" msgid "Change extrusion role G-code" msgstr "Estrusio-rola aldatzeko G-codea" msgid "Post-processing Scripts" msgstr "Postprozesatze-scriptak" msgid "Slicing Pipeline Plugin" msgstr "Xerratze-kanalizazioaren plugina" msgid "Plugin Configuration" msgstr "Pluginaren konfigurazioa" msgid "Notes" msgstr "Oharrak" msgid "Frequent" msgstr "Ohikoak" #, c-format, boost-format msgid "" "Following line %s contains reserved keywords.\n" "Please remove it, or G-code visualization and print time estimation will be broken." msgid_plural "" "Following lines %s contain reserved keywords.\n" "Please remove them, or G-code visualization and print time estimation will be broken." msgstr[0] "" "%s lerroak erreserbatutako gako-hitzak ditu.\n" "Kendu, bestela G-codearen bistaratzeak eta inprimatze-denboraren estimazioak huts egingo dute." msgstr[1] "" "%s lerroek erreserbatutako gako-hitzak dituzte.\n" "Kendu, bestela G-codearen bistaratzeak eta inprimatze-denboraren estimazioak huts egingo dute." msgid "Reserved keywords found" msgstr "Erreserbatutako gako-hitzak aurkitu dira" msgid "Setting Overrides" msgstr "Ezarpenen gainidazketak" msgid "Basic information" msgstr "Oinarrizko informazioa" msgid "Recommended nozzle temperature" msgstr "Gomendatutako pitaren tenperatura" msgid "Recommended nozzle temperature range of this filament. 0 means not set" msgstr "Filamentu honetarako gomendatutako pitaren tenperatura-tartea. 0 balioak ez dagoela ezarrita esan nahi du" msgid "Flow ratio and Pressure Advance" msgstr "Fluxu-ratioa eta presio-aurrerapena" msgid "Print chamber temperature" msgstr "Inprimatzeko ganberako tenperatura" msgid "Chamber temperature" msgstr "Ganberako tenperatura" msgid "Target chamber temperature, and the minimal chamber temperature at which printing should start" msgstr "Helburuko ganberako tenperatura eta inprimatzea hasteko gutxieneko ganbera-tenperatura" msgid "Target" msgstr "Helburua" msgid "Minimal" msgstr "Gutxienekoa" msgid "Print temperature" msgstr "Inprimatze-tenperatura" msgid "Nozzle temperature when printing" msgstr "Pitaren tenperatura inprimatzean" msgid "Bed temperature when the Cool Plate SuperTack is installed. A value of 0 means the filament does not support printing on the Cool Plate SuperTack." msgstr "Ohearen tenperatura SuperTack Plaka hotza instalatuta dagoenean. 0 balioak filamentuak SuperTack Plaka hotzaren gainean inprimatzea ez duela onartzen esan nahi du." msgid "Cool Plate" msgstr "Plaka hotza" msgid "This is the bed temperature when the Cool Plate is installed. A value of 0 means the filament does not support printing on the Cool Plate." msgstr "Hau da ohearen tenperatura plaka hotza instalatuta dagoenean. 0 balioak filamentuak plaka hotza gainean inprimatzea ez duela onartzen esan nahi du." msgid "Textured Cool Plate" msgstr "Testuradun plaka hotza" msgid "This is the bed temperature when the Textured Cool Plate is installed. A value of 0 means the filament does not support printing on the Textured Cool Plate." msgstr "Hau da ohearen tenperatura Testuradun plaka hotza instalatuta dagoenean. 0 balioak filamentuak Testuradun plaka hotzaren gainean inprimatzea ez duela onartzen esan nahi du." msgid "This is the bed temperature when the engineering plate is installed. A value of 0 means the filament does not support printing on the Engineering Plate." msgstr "Hau da ohearen tenperatura Ingeniaritza-plaka instalatuta dagoenean. 0 balioak filamentuak Ingeniaritza-plakaren gainean inprimatzea ez duela onartzen esan nahi du." msgid "Smooth PEI Plate / High Temp Plate" msgstr "PEI plaka leuna / Tenperatura alturako plaka" msgid "This is the bed temperature when the Smooth PEI Plate/High Temperature Plate is installed. A value of 0 means the filament does not support printing on the Smooth PEI Plate/High Temp Plate." msgstr "Hau da ohearen tenperatura PEI plaka leuna/Tenperatura alturako plaka instalatuta dagoenean. 0 balioak filamentuak plaka horretan inprimatzea ez duela onartzen esan nahi du." msgid "This is the bed temperature when the Textured PEI Plate is installed. A value of 0 means the filament does not support printing on the Textured PEI Plate." msgstr "Hau da ohearen tenperatura Testuradun PEI plaka instalatuta dagoenean. 0 balioak filamentuak Testuradun PEI plakaren gainean inprimatzea ez duela onartzen esan nahi du." msgid "Volumetric speed limitation" msgstr "Abiadura bolumetrikoaren muga" msgid "Cooling for specific layer" msgstr "Geruza jakinerako hoztea" msgid "Part cooling fan" msgstr "Pieza hozteko haizagailua" msgid "Min fan speed threshold" msgstr "Haizagailuaren gutx. abiadura-atalasea" msgid "The part cooling fan will run at the minimum fan speed when the estimated layer time is longer than the threshold value. When the layer time is shorter than the threshold, the fan speed will be interpolated between the minimum and maximum fan speed according to layer printing time." msgstr "Piezaren hozte-haizagailuak gutxieneko abiaduran funtzionatuko du geruzaren estimatutako denbora atalasea baino luzeagoa denean. Geruzaren denbora atalasea baino laburragoa denean, haizagailuaren abiadura gutxienekoaren eta gehienekoaren artean interpolatuko da geruzaren inprimatze-denboraren arabera." msgid "Max fan speed threshold" msgstr "Haizagailuaren geh. abiadura-atalasea" msgid "The part cooling fan will run at maximum speed when the estimated layer time is shorter than the threshold value." msgstr "Piezaren hozte-haizagailuak gehieneko abiaduran funtzionatuko du geruzaren estimatutako denbora atalasea baino laburragoa denean." msgid "Auxiliary part cooling fan" msgstr "Pieza hozteko haizagailu osagarria" msgid "Exhaust fan" msgstr "Erauzketa-haizagailua" msgid "During print" msgstr "Inprimatzean" msgid "Complete print" msgstr "Osatu inprimaketa" msgid "Filament start G-code" msgstr "Filamentuaren hasierako G-codea" msgid "Filament end G-code" msgstr "Filamentuaren amaierako G-codea" msgid "Wipe tower parameters" msgstr "Purgatze-dorrearen parametroak" msgid "Multi Filament" msgstr "Filamentu anitz" msgid "Tool change parameters with single extruder MM printers" msgstr "Estrusore bakarreko MM inprimagailuetarako tresna-aldaketaren parametroak" msgid "Set" msgstr "Ezarri" msgid "Tool change parameters with multi extruder MM printers" msgstr "Estrusore anitzeko MM inprimagailuetarako tresna-aldaketaren parametroak" msgid "Dependencies" msgstr "Mendekotasunak" msgid "Compatible printers" msgstr "Inprimagailu bateragarriak" msgid "Compatible process profiles" msgstr "Prozesu-profil bateragarriak" msgid "Printable space" msgstr "Inprimatzeko espazioa" #. TRN: The first argument is the parameter's name; the second argument is its value. #, boost-format msgid "Invalid value provided for parameter %1%: %2%" msgstr "Balio baliogabea eman da %1% parametrorako: %2%" msgid "G-code flavor is switched" msgstr "G-code aldaera aldatu da" msgid "Cooling Fan" msgstr "Hozte-haizagailua" msgid "Fan speed-up time" msgstr "Haizagailua bizkortzeko denbora" msgid "Extruder Clearance" msgstr "Estrusorearen tartea" msgid "Adaptive bed mesh" msgstr "Ohe-sare egokigarria" msgid "Accessory" msgstr "Osagarria" msgid "Machine G-code" msgstr "Makinaren G-codea" msgid "File header G-code" msgstr "Fitxategi-goiburuko G-codea" msgid "Machine start G-code" msgstr "Makinaren hasierako G-codea" msgid "Machine end G-code" msgstr "Makinaren amaierako G-codea" msgid "Printing by object G-code" msgstr "Objektuka inprimatzeko G-codea" msgid "Before layer change G-code" msgstr "Geruza aldatu aurreko G-codea" msgid "Layer change G-code" msgstr "Geruza-aldaketaren G-codea" msgid "Timelapse G-code" msgstr "Timelapsearen G-codea" msgid "Clumping Detection G-code" msgstr "Material-metaketa detektatzeko G-codea" msgid "Change filament G-code" msgstr "Filamentua aldatzeko G-codea" msgid "Pause G-code" msgstr "Pausatzeko G-codea" msgid "Template Custom G-code" msgstr "Txantiloiaren G-code pertsonalizatua" msgid "Motion ability" msgstr "Mugimendu-gaitasuna" msgid "Normal" msgstr "Normala" msgid "Resonance Compensation" msgstr "Erresonantziaren konpentsazioa" msgid "Resonance Avoidance Speed" msgstr "Erresonantzia saihesteko abiadura" msgid "Frequency" msgstr "Maiztasuna" msgid "The frequency of the anti-vibration signal will correspond to the natural frequency of the frame." msgstr "Bibrazioen aurkako seinalearen maiztasuna egituraren maiztasun naturalarekin bat etorriko da." msgid "Damping" msgstr "Moteltzea" msgid "Damping ratio for the input shaping filter." msgstr "Sarrera-moldaketaren iragazkirako moteltze-erlazioa." msgid "Speed limitation" msgstr "Abiadura-muga" msgid "Acceleration limitation" msgstr "Azelerazio-muga" msgid "Jerk limitation" msgstr "Jerk muga" msgid "Single extruder multi-material setup" msgstr "Estrusore bakarreko material anitzeko konfigurazioa" msgid "Number of extruders of the printer." msgstr "Inprimagailuaren estrusore kopurua." msgid "" "Single Extruder Multi Material is selected,\n" "and all extruders must have the same diameter.\n" "Do you want to change the diameter for all extruders to first extruder nozzle diameter value?" msgstr "" "Estrusore bakarreko material anitzeko aukera hautatu da,\n" "eta estrusore guztiek diametro bera izan behar dute.\n" "Estrusore guztien diametroa lehen estrusorearen pitaren diametrora aldatu nahi duzu?" msgid "Nozzle diameter" msgstr "Pitaren diametroa" msgid "Wipe tower" msgstr "Purgatze-dorrea" msgid "Single extruder multi-material parameters" msgstr "Estrusore bakarreko material anitzeko parametroak" msgid "This is a single extruder multi-material printer, diameters of all extruders will be set to the new value. Do you want to proceed?" msgstr "Hau estrusore bakarreko material anitzeko inprimagailua da; estrusore guztien diametroak balio berrira ezarriko dira. Jarraitu nahi duzu?" msgid "Layer height limits" msgstr "Geruza-altueraren mugak" msgid "Z-Hop" msgstr "Z jauzia" msgid "Retraction when switching material" msgstr "Atzera-egitea materiala aldatzean" msgid "" "The Retract before wipe option could be only 100% when using the Firmware Retraction mode.\n" "\n" "Shall I set it to 100% in order to enable Firmware Retraction?" msgstr "" "'Garbitu aurretik atzera egin' aukerak %100 izan behar du firmware bidezko atzera-egite modua erabiltzean.\n" "\n" "%100ean ezarri nahi duzu firmware bidezko atzera-egitea gaitzeko?" msgid "Firmware Retraction" msgstr "Firmware bidezko atzera-egitea" msgid "Switching to a printer with different extruder types or numbers will discard or reset changes to extruder or multi-nozzle-related parameters." msgstr "Estrusore mota edo kopuru desberdina duen inprimagailu batera aldatzean, estrusorearekin edo pita anitzekin lotutako parametroen aldaketak baztertu edo berrezarri egingo dira." msgid "Use Modified Value" msgstr "Erabili aldatutako balioa" msgid "Detached" msgstr "Bereizita" #, c-format, boost-format msgid "%d Filament Preset and %d Process Preset is attached to this printer. Those presets would be deleted if the printer is deleted." msgstr "%d filamentuen aurrezarpen eta %d prozesu-aurrezarpen inprimagailu honi lotuta daude. Inprimagailua ezabatuz gero, aurrezarpen horiek ezabatuko lirateke." msgid "Presets inherited by other presets cannot be deleted!" msgstr "Beste aurrezarpen batzuetatik herentzian hartutako aurrezarpenak ezin dira ezabatu!" msgid "The following presets inherit this preset." msgid_plural "The following preset inherits this preset." msgstr[0] "Hurrengo aurrezarpenak aurrezarpen hau hartuko du herentzian." msgstr[1] "Hurrengo aurrezarpenek aurrezarpen hau hartuko dute herentzian." #. TRN Remove/Delete #, boost-format msgid "%1% Preset" msgstr "%1% aurrezarpena" msgid "The following preset will be deleted too:" msgid_plural "The following presets will be deleted too:" msgstr[0] "Aurrezarpen hau ere ezabatuko da:" msgstr[1] "Aurrezarpen hauek ere ezabatuko dira:" msgid "" "Are you sure to delete the selected preset?\n" "If the preset corresponds to a filament currently in use on your printer, please reset the filament information for that slot." msgstr "" "Ziur zaude hautatutako aurrezarpena ezabatu nahi duzula?\n" "Aurrezarpena zure inprimagailuan unean erabiltzen den filamenturen bati badagokio, berrezarri zirrikitu horretako filamentuen informazioa." #, boost-format msgid "Are you sure you want to %1% the selected preset?" msgstr "Ziur hautatutako aurrezarpena %1% nahi duzula?" msgid "Select printers" msgstr "Hautatu inprimagailuak" msgid "Select profiles" msgstr "Hautatu profilak" #, c-format, boost-format msgid "" " - %s:\n" " %s first layer %d %s, other layers %d %s\n" " %s max delta %d %s, current delta %d %s\n" msgstr "" " - %s:\n" " %s lehen geruza %d %s, gainerako geruzak %d %s\n" " %s gehieneko delta %d %s, uneko delta %d %s\n" msgid "Some first-layer and other-layer temperature pairs exceed safety limits.\n" msgstr "Lehen geruzaren eta gainerako geruzen tenperatura-pare batzuek segurtasun-mugak gainditzen dituzte.\n" msgid "" "\n" "Invalid pairs:\n" msgstr "" "\n" "Bikote baliogabeak:\n" msgid "" "\n" "You can go back to edit values, or continue if this is intentional." msgstr "" "\n" "Atzera egin dezakezu balioak editatzeko, edo jarraitu hori nahita egin baduzu." msgid "" "\n" "\n" "Continue anyway?" msgstr "" "\n" "\n" "Hala ere jarraitu?" msgid "Temperature Safety Check" msgstr "Tenperaturaren segurtasun-egiaztapena" msgid "Continue" msgstr "Jarraitu" msgid "Don't warn again for this preset" msgstr "Ez ohartarazi berriro aurrezarpen honetarako" #, c-format, boost-format msgid "%s: %s" msgstr "%s: %s" msgid "No modifications need to be copied." msgstr "Ez dago kopiatu beharreko aldaketarik." msgid "Copy paramters" msgstr "Kopiatu parametroak" #, c-format, boost-format msgid "Modify paramters of %s" msgstr "Aldatu %s-(r)en parametroak" #, c-format, boost-format msgid "Do you want to modify the following parameters of the %s to that of the %s?" msgstr "%s-(r)en ondorengo parametroak %s-(r)enekin ordezkatu nahi dituzu?" msgid "Click to reset current value and attach to the global value." msgstr "Egin klik uneko balioa berrezartzeko eta balio globalari lotzeko." msgid "Click to drop current modifications and reset to saved value." msgstr "Egin klik uneko aldaketak baztertzeko eta gordetako balioa berrezartzeko." msgid "Process Settings" msgstr "Prozesuaren ezarpenak" msgid "unsaved changes" msgstr "gorde gabeko aldaketak" msgid "Transfer or discard changes" msgstr "Transferitu edo baztertu aldaketak" msgid "Old Value" msgstr "Balio zaharra" msgid "New Value" msgstr "Balio berria" msgid "Transfer" msgstr "Transferitu" msgid "Don't save" msgstr "Ez gorde" msgid "Discard" msgstr "Baztertu" msgid "the new profile" msgstr "profil berria" #, boost-format msgid "" "Switch to\n" "\"%1%\"\n" "discarding any changes made in\n" "\"%2%\"." msgstr "" "Aldatu hona:\n" "\"%1%\"\n" "eta baztertu hemen egindako aldaketak:\n" "\"%2%\"." #, boost-format msgid "" "All \"New Value\" settings modified in\n" "\"%1%\"\n" "will be transferred to\n" "\"%2%\"." msgstr "" "\"%1%\"-n aldatutako \"Balio berria\" ezarpen guztiak hona transferituko dira:\n" "\"%2%\"." #, boost-format msgid "" "All \"New Value\" settings are saved in\n" "\"%1%\"\n" "and \"%2%\" will open without any changes." msgstr "\"Balio berria\" ezarpen guztiak \"%1%\"-n gordeko dira, eta \"%2%\" aldaketarik gabe irekiko da." msgid "Click the right mouse button to display the full text." msgstr "Egin klik saguaren eskuineko botoiarekin testu osoa bistaratzeko." msgid "No changes will be saved." msgstr "Ez da aldaketarik gordeko." msgid "All changes will be discarded." msgstr "Aldaketa guztiak baztertuko dira." msgid "Save the selected options." msgstr "Gorde hautatutako aukerak." msgid "Keep the selected options." msgstr "Mantendu hautatutako aukerak." msgid "Transfer the selected options to the newly selected preset." msgstr "Transferitu hautatutako aukerak hautatu berri den aurrezarpenera." #, boost-format msgid "" "Save the selected options to preset \n" "\"%1%\"." msgstr "" "Gorde hautatutako aukerak aurrezarpen honetan: \n" "\"%1%\"." #, boost-format msgid "" "Transfer the selected options to the newly selected preset \n" "\"%1%\"." msgstr "" "Transferitu hautatutako aukerak hautatu berri den \n" "\"%1%\" aurrezarpenera." #, boost-format msgid "Preset \"%1%\" contains the following unsaved changes:" msgstr "\"%1%\" aurrezarpenak gorde gabeko aldaketa hauek ditu:" #, boost-format msgid "Preset \"%1%\" is not compatible with the new printer profile and it contains the following unsaved changes:" msgstr "\"%1%\" aurrezarpena ez da bateragarria inprimagailu-profil berriarekin eta gorde gabeko aldaketa hauek ditu:" #, boost-format msgid "Preset \"%1%\" is not compatible with the new process profile and it contains the following unsaved changes:" msgstr "\"%1%\" aurrezarpena ez da bateragarria prozesu-profil berriarekin eta gorde gabeko aldaketa hauek ditu:" #, boost-format msgid "You have changed some settings of preset \"%1%\"." msgstr "\"%1%\" aurrezarpenaren ezarpen batzuk aldatu dituzu." msgid "" "\n" "You can save or discard the preset values you have modified." msgstr "" "\n" "Aldatu dituzun aurrezarpen-balioak gorde edo bazter ditzakezu." msgid "" "\n" "You can save or discard the preset values you have modified, or choose to transfer the values you have modified to the new preset." msgstr "" "\n" "Aldatutako aurrezarpen-balioak gorde edo bazter ditzakezu, edo aldatu dituzun balioak aurrezarpen berrira transferitzea aukeratu." msgid "You have previously modified your settings." msgstr "Aurretik zure ezarpenak aldatu dituzu." msgid "" "\n" "You can discard the preset values you have modified, or choose to transfer the modified values to the new project" msgstr "" "\n" "Aldatutako aurrezarpen-balioak bazter ditzakezu, edo aldatu dituzun balioak proiektu berrira transferitzea aukeratu" msgid "Extruder count" msgstr "Estrusore kopurua" msgid "Capabilities" msgstr "Gaitasunak" msgid "Left: " msgstr "Ezkerra: " msgid "Right: " msgstr "Eskuina: " msgid "Show all presets (including incompatible)" msgstr "Erakutsi aurrezarpen guztiak (bateraezinak barne)" msgid "Select presets to compare" msgstr "Hautatu konparatu beharreko aurrezarpenak" msgid "Left Preset Value" msgstr "Ezkerreko aurrezarpenaren balioa" msgid "Right Preset Value" msgstr "Eskuineko aurrezarpenaren balioa" msgid "You can only transfer to current active profile because it has been modified." msgstr "Uneko profil aktibora bakarrik transferitu dezakezu, aldatu egin delako." msgid "" "Transfer the selected options from left preset to the right.\n" "Note: New modified presets will be selected in settings tabs after close this dialog." msgstr "" "Transferitu hautatutako aukerak ezkerreko aurrezarpenetik eskuinekora.\n" "Oharra: aldatutako aurrezarpen berriak ezarpen-fitxetan hautatuko dira elkarrizketa-koadro hau itxi ondoren." msgid "Transfer values from left to right" msgstr "Transferitu balioak ezkerretik eskuinera" msgid "If enabled, this dialog can be used for transfer selected values from left to right preset." msgstr "Gaituta badago, elkarrizketa-koadro hau erabil daiteke hautatutako balioak ezkerreko aurrezarpenetik eskuinekora transferitzeko." msgid "One of the presets does not exist" msgstr "Aurrezarpenetako bat ez da existitzen" msgid "Compared presets has different printer technology" msgstr "Alderatutako aurrezarpenek inprimagailu-teknologia desberdina dute" msgid "Add File" msgstr "Gehitu fitxategia" msgid "Set as cover" msgstr "Ezarri estalki gisa" msgid "Cover" msgstr "Estalki" #, boost-format msgid "The name \"%1%\" already exists." msgstr "\"%1%\" izena badago lehendik." msgid "Basic Info" msgstr "Oinarrizko informazioa" msgid "Pictures" msgstr "Irudiak" msgid "Bill of Materials" msgstr "Materialen zerrenda" msgid "Assembly Guide" msgstr "Muntaketa-gida" msgid "Author" msgstr "Egilea" msgid "Model Name" msgstr "Modeloaren izena" msgid "Description:" msgstr "Deskribapena:" #, c-format, boost-format msgid "%s Update" msgstr "%s eguneratzea" msgid "A new version is available" msgstr "Bertsio berri bat dago erabilgarri" msgid "Configuration update" msgstr "Konfigurazioaren eguneratzea" msgid "A new configuration package is available. Do you want to install it?" msgstr "Konfigurazio-pakete berri bat dago eskuragarri. Instalatu nahi duzu?" msgid "the configuration package is incompatible with the current application." msgstr "konfigurazio-paketea ez da bateragarria uneko aplikazioarekin." #, c-format, boost-format msgid "" "The configuration package is incompatible with the current application.\n" "%s will update the configuration package to allow the application to start." msgstr "" "Konfigurazio-paketea ez da bateragarria uneko aplikazioarekin.\n" "%s-k konfigurazio-paketea eguneratuko du aplikazioa abiarazi ahal izateko." #, c-format, boost-format msgid "Exit %s" msgstr "Irten %s(e)tik" msgid "Configuration updates" msgstr "Konfigurazio-eguneratzeak" msgid "No updates available." msgstr "Ez dago eguneratzerik erabilgarri." msgid "The configuration is up to date." msgstr "Konfigurazioa eguneratuta dago." msgid "OBJ file import color" msgstr "OBJ fitxategia inportatzeko kolorea" msgid "Some faces don't have color defined." msgstr "Aurpegi batzuek ez dute kolorerik definituta." msgid "MTL file exist error, could not find the material:" msgstr "MTL fitxategiaren existentzia-errorea; ezin izan da materiala aurkitu:" msgid "Please check OBJ or MTL file." msgstr "Egiaztatu OBJ edo MTL fitxategia." msgid "Specify number of colors:" msgstr "Zehaztu kolore kopurua:" msgid "Enter or click the adjustment button to modify number again" msgstr "Idatzi balioa edo egin klik doikuntza-botoian zenbakia berriro aldatzeko" msgid "Recommended " msgstr "Gomendatua " msgid "view" msgstr "ikuspegia" msgid "Current filament colors" msgstr "Uneko filamentuen koloreak" msgid "Matching" msgstr "Parekatzea" msgid "Quick set" msgstr "Ezarpen azkarra" msgid "Color match" msgstr "Kolore-parekatzea" msgid "Approximate color matching." msgstr "Gutxi gorabeherako kolore-parekatzea." msgid "Append" msgstr "Erantsi" msgid "Append to existing filaments" msgstr "Gehitu lehendik dauden filamentuei" msgid "Reset mapped extruders." msgstr "Berrezarri mapatutako estrusoreak." msgid "Note" msgstr "Oharra" msgid "" "The color has been selected, you can choose OK \n" " to continue or manually adjust it." msgstr "" "Kolorea hautatu da; Ados aukera dezakezu \n" " jarraitzeko edo eskuz doitzeko." msgid "—> " msgstr "—> " msgid "" "Synchronizing AMS filaments will discard your modified but unsaved filament presets.\n" "Are you sure you want to continue?" msgstr "" "AMS filamentuak sinkronizatzeak aldatu baina gorde ez dituzun filamentuen aurrezarpenak baztertuko ditu.\n" "Ziur jarraitu nahi duzula?" msgctxt "Sync_AMS" msgid "Original" msgstr "Jatorrizkoa" msgid "After mapping" msgstr "Mapatu ondoren" msgid "After overwriting" msgstr "Gainidatzi ondoren" msgctxt "Sync_AMS" msgid "Plate" msgstr "Plaka" msgid "The connected printer does not match the currently selected printer. Please change the selected printer." msgstr "Konektatutako inprimagailua ez dator bat unean hautatutakoarekin. Aldatu hautatutako inprimagailua." msgid "Mapping" msgstr "Mapaketa" msgid "Overwriting" msgstr "Gainidazten" msgid "Reset all filament mapping" msgstr "Berrezarri filamentuen mapaketa guztia" msgid "(Recommended filament)" msgstr "(Gomendatutako filamentua)" msgid "Advanced Options" msgstr "Aukera aurreratuak" msgid "" "Check heatbed flatness. Leveling makes extruded height uniform.\n" "*Automatic mode: Level first (about 10 seconds). Skip if surface is fine." msgstr "" "Egiaztatu ohe beroaren lautasuna. Nibelatzeak estrusio-altuera uniformea izatea eragiten du.\n" "*Modu automatikoa: nibelatu lehenik (10 segundo inguru). Saltatu gainazala ondo badago." msgid "" "Calibrate nozzle offsets to enhance print quality.\n" "*Automatic mode: Check for calibration before printing; skip if unnecessary." msgstr "" "Kalibratu pitaren desplazamenduak inprimatze-kalitatea hobetzeko.\n" "*Modu automatikoa: egiaztatu kalibrazioa inprimatu aurretik; saltatu beharrezkoa ez bada." msgid "Use AMS" msgstr "AMSa erabili" msgid "Tip" msgstr "Aholkua" msgid "Only synchronize filament type and color, not including AMS slot information." msgstr "Sinkronizatu filamentu mota eta kolorea soilik, AMS zirrikituaren informazioa sartu gabe." msgid "Replace the project filaments list sequentially based on printer filaments. And unused printer filaments will be automatically added to the end of the list." msgstr "Ordezkatu proiektuko filamentuen zerrenda sekuentzialki inprimagailuko filamentuen arabera. Erabili gabeko inprimagailuko filamentuak automatikoki gehituko dira zerrendaren amaieran." msgid "Add unused AMS filaments to filaments list." msgstr "Gehitu erabili gabeko AMS filamentuak filamentuen zerrendara." msgid "Automatically merge the same colors in the model after mapping." msgstr "Mapatu ondoren, batu automatikoki modeloko kolore berdinak." msgid "After being synced, this action cannot be undone." msgstr "Sinkronizatu ondoren, ekintza hau ezin da desegin." msgid "After being synced, the project's filament presets and colors will be replaced with the mapped filament types and colors. This action cannot be undone." msgstr "Sinkronizatu ondoren, proiektuko filamentu-aurrezarpenak eta koloreak mapatutako filamentu mota eta koloreekin ordezkatuko dira. Ekintza hau ezin da desegin." msgid "Are you sure to synchronize the filaments?" msgstr "Ziur filamentuak sinkronizatu nahi dituzula?" msgid "Synchronize now" msgstr "Sinkronizatu orain" msgid "Synchronize Filament Information" msgstr "Sinkronizatu filamentuen informazioa" msgid "Add unused filaments to filaments list." msgstr "Gehitu erabili gabeko filamentuak filamentuen zerrendara." msgid "Only synchronize filament type and color, not including slot information." msgstr "Sinkronizatu filamentu mota eta kolorea soilik, zirrikituaren informazioa sartu gabe." msgid "Ext spool" msgstr "Kanpoko bobina" msgid "Please check whether the nozzle type of the device is the same as the preset nozzle type." msgstr "Egiaztatu gailuaren pita mota aurrezarritako pita motaren berdina den." msgid "Storage is not available or is in read-only mode." msgstr "Biltegiratze-gailua ez dago erabilgarri edo irakurtzeko soilik moduan dago." #, c-format, boost-format msgid "The selected printer (%s) is incompatible with the chosen printer profile in the slicer (%s)." msgstr "Hautatutako inprimagailua (%s) ez da bateragarria xerratzailean aukeratutako inprimagailu-profilarekin (%s)." msgid "Timelapse is not supported because Print sequence is set to \"By object\"." msgstr "Timelapsea ez dago onartuta inprimatze-sekuentzia \"Objektuka\" ezarrita dagoelako." msgid "You selected external and AMS filament at the same time in an extruder, you will need manually change external filament." msgstr "Estrusore berean kanpoko filamentua eta AMSko filamentua hautatu dituzu; kanpoko filamentua eskuz aldatu beharko duzu." msgid "Successfully synchronized nozzle information." msgstr "Pitaren informazioa behar bezala sinkronizatu da." msgid "Successfully synchronized nozzle and AMS number information." msgstr "Pitaren eta AMS kopuruaren informazioa behar bezala sinkronizatu da." msgid "Do you want to continue to sync filaments?" msgstr "Filamentuak sinkronizatzen jarraitu nahi duzu?" msgid "Successfully synchronized filament color from printer." msgstr "Filamentuaren kolorea behar bezala sinkronizatu da inprimagailutik." msgid "Successfully synchronized color and type of filament from printer." msgstr "Inprimagailuko filamentuaren kolorea eta mota behar bezala sinkronizatu dira." msgctxt "FinishSyncAms" msgid "OK" msgstr "Ados" msgid "Ramming customization" msgstr "Muturraren moldaketa pertsonalizatzea" msgid "" "Ramming denotes the rapid extrusion just before a tool change in a single-extruder MM printer. Its purpose is to properly shape the end of the unloaded filament so it does not prevent insertion of the new filament and can itself be reinserted later. This phase is important and different materials can require different extrusion speeds to get the good shape. For this reason, the extrusion rates during ramming are adjustable.\n" "\n" "This is an expert-level setting, incorrect adjustment will likely lead to jams, extruder wheel grinding into filament etc." msgstr "" "Muturraren moldaketa-ak (ramming-ak) estrusore bakarreko MM inprimagailu batean tresna aldatu aurreko estrusio azkarra adierazten du. Helburua deskargatutako filamentuen muturra behar bezala formatzea da, filamentua berria sartzea eragotzi ez dezan eta gero berriro sartu ahal izan dadin. Fase hau garrantzitsua da, eta material desberdinek estrusio-abiadura desberdinak eska ditzakete forma egokia lortzeko. Horregatik, muturraren moldaketa-ko estrusio-tasak doigarriak dira.\n" "\n" "Hau aditu-mailako ezarpena da; doikuntza okerrak trabak, estrusorearen gurpilak filamentua jatea eta antzeko arazoak eragin ditzake." #, boost-format msgid "For constant flow rate, hold %1% while dragging." msgstr "Fluxu-tasa konstantea izateko, mantendu %1% sakatuta arrastatzean." msgid "ms" msgstr "ms" msgid "Total ramming" msgstr "Erabateko moldaketa" msgid "Volume" msgstr "Bolumena" msgid "Ramming line" msgstr "Moldaketa-lerroa" msgid "Orca would re-calculate your flushing volumes everytime the filaments color changed or filaments changed. You could disable the auto-calculate in Orca Slicer > Preferences" msgstr "Orcak purgatze-bolumenak berriro kalkulatuko ditu filamentuen kolorea edo filamentuak aldatzen diren bakoitzean. Kalkulu automatikoa desgaitu dezakezu OrcaSlicer > Hobespenak atalean" msgid "Flushing volume (mm³) for each filament pair." msgstr "Filamentu bikote bakoitzerako purgatze-bolumena (mm³)." #, c-format, boost-format msgid "Suggestion: Flushing Volume in range [%d, %d]" msgstr "Iradokizuna: purgatze-bolumena [%d, %d] barrutian" #, c-format, boost-format msgid "The multiplier should be in range [%.2f, %.2f]." msgstr "Biderkatzaileak [%.2f, %.2f] tartean egon behar du." msgid "Re-calculate" msgstr "Berriro kalkulatu" msgid "Multiplier" msgstr "Biderkatzailea" msgid "Flushing volumes for filament change" msgstr "Filamentua aldatzeko purgatze-bolumenak" msgid "Please choose the filament colour" msgstr "Hautatu filamentuen kolorea" msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer." msgstr "Waylanden jatorrizko zuzeneko ikuspegiak GStreamer GTK bideo-hustubidea behar du. Instalatu GStreamerrerako gtksink plugina eta berrabiarazi OrcaSlicer." msgid "Failed to initialize the native Wayland GStreamer video sink. Please check your GStreamer GTK plugin installation." msgstr "Ezin izan da Waylanden jatorrizko GStreamer bideo-hustubidea hasieratu. Egiaztatu GStreamer GTK pluginaren instalazioa." msgid "Windows Media Player is required for this task! Do you want to enable 'Windows Media Player' for your operation system?" msgstr "Windows Media Player behar da zeregin honetarako! 'Windows Media Player' gaitu nahi duzu zure sistema eragilean?" msgid "BambuSource has not correctly been registered for media playing! Press Yes to re-register it. You will be promoted twice" msgstr "BambuSource ez da behar bezala erregistratu multimedia erreproduzitzeko! Sakatu Bai berriro erregistratzeko. Bi aldiz galdetuko zaizu" msgid "Missing BambuSource component registered for media playing! Please re-install OrcaSlicer or seek community help." msgstr "Multimedia erreproduzitzeko erregistratutako BambuSource osagaia falta da! Berrinstalatu OrcaSlicer edo eskatu laguntza komunitateari." msgid "Using a BambuSource from a different install, video play may not work correctly! Press Yes to fix it." msgstr "Beste instalazio bateko BambuSource erabiltzen ari zara; baliteke bideo-erreprodukzioak behar bezala ez funtzionatzea! Sakatu Bai konpontzeko." msgid "Your system is missing H.264 codecs for GStreamer, which are required to play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-libav packages, then restart Orca Slicer?)" msgstr "Zure sisteman GStreamer-erako H.264 kodekak falta dira, eta beharrezkoak dira bideoa erreproduzitzeko. (Saiatu gstreamer1.0-plugins-bad edo gstreamer1.0-libav paketeak instalatzen, eta berrabiarazi OrcaSlicer?)" msgid "Cloud agent is not available. Please restart OrcaSlicer and try again." msgstr "Hodeiko agentea ez dago erabilgarri. Berrabiarazi OrcaSlicer eta saiatu berriro." msgid "Bambu Network plug-in not detected." msgstr "Bambu Network plugina ez da detektatu." msgid "Click here to download it." msgstr "Egin klik hemen deskargatzeko." msgid "Login" msgstr "Hasi saioa" msgid "Login failed. Please try again." msgstr "Saio-hasierak huts egin du. Saiatu berriro." msgid "parse json failed" msgstr "JSONa analizatzeak huts egin du" msgid "[Action Required] " msgstr "[Ekintza behar da] " msgid "[Action Required]" msgstr "[Ekintza behar da]" msgid "The configuration package is changed in previous Config Guide" msgstr "Konfigurazio-paketea aldatu da aurreko Konfigurazio Gidan" msgid "Configuration package changed" msgstr "Konfigurazio-paketea aldatu da" msgid "Toolbar" msgstr "Tresna-barra" msgid "Objects list" msgstr "Objektuen zerrenda" msgid "Import geometry data from STL/STEP/3MF/OBJ/AMF files" msgstr "Inportatu geometriaren datuak STL/STEP/3MF/OBJ/AMF fitxategietatik" msgid "Paste from clipboard" msgstr "Itsatsi arbeletik" msgid "Show/Hide 3Dconnexion devices settings dialog" msgstr "Erakutsi/Ezkutatu 3Dconnexion gailuen ezarpenen elkarrizketa-koadroa" msgid "Switch table page" msgstr "Aldatu taula-orria" msgid "Show keyboard shortcuts list" msgstr "Erakutsi teklatu-lasterbideen zerrenda" msgid "Global shortcuts" msgstr "Lasterbide globalak" msgid "Pan View" msgstr "Mugitu ikuspegia" msgid "Rotate View" msgstr "Biratu ikuspegia" msgid "Middle mouse button" msgstr "Saguaren erdiko botoia" msgid "Zoom View" msgstr "Zooma ikuspegian" msgid "Auto orients selected objects or all objects. If there are selected objects, it just orients the selected ones. Otherwise, it will orient all objects in the current project." msgstr "Hautatutako objektuak edo objektu guztiak automatikoki orientatzen ditu. Objektuak hautatuta badaude, hautatutakoak bakarrik orientatzen ditu. Bestela, uneko proiektuko objektu guztiak orientatuko ditu." msgid "Auto orients all objects on the active plate." msgstr "Objektu guztiak automatikoki orientatzen ditu plaka aktiboan." msgid "Collapse/Expand the sidebar" msgstr "Tolestu/Zabaldu alboko barra" msgid "Any arrow" msgstr "Edozein gezi" msgid "Movement in camera space" msgstr "Mugimendua kameraren espazioan" msgid "Select a part" msgstr "Hautatu pieza bat" msgid "Select multiple objects" msgstr "Hautatu objektu bat baino gehiago" msgid "Select objects by rectangle" msgstr "Hautatu objektuak laukizuzen bidez" # AI Translated msgctxt "Keyboard Shortcut" msgid "Arrow Up" msgstr "Gora gezia" msgid "Move selection 10mm in positive Y direction" msgstr "Mugitu hautapena 10 mm Y noranzko positiboan" # AI Translated msgctxt "Keyboard Shortcut" msgid "Arrow Down" msgstr "Behera gezia" msgid "Move selection 10mm in negative Y direction" msgstr "Mugitu hautapena 10 mm Y noranzko negatiboan" # AI Translated msgctxt "Keyboard Shortcut" msgid "Arrow Left" msgstr "Ezkerrera gezia" msgid "Move selection 10mm in negative X direction" msgstr "Mugitu hautapena 10 mm X noranzko negatiboan" # AI Translated msgctxt "Keyboard Shortcut" msgid "Arrow Right" msgstr "Eskuinera gezia" msgid "Move selection 10mm in positive X direction" msgstr "Mugitu hautapena 10 mm X noranzko positiboan" msgid "Movement step set to 1mm" msgstr "Mugimendu-urratsa 1 mm-an ezarri da" msgid "Keyboard 1-9: set filament for object/part" msgstr "1-9 teklak: ezarri filamentua objektuari/piezari" msgid "Camera view - Default" msgstr "Kameraren ikuspegia - Lehenetsia" msgid "Camera view - Top" msgstr "Kameraren ikuspegia - Goia" msgid "Camera view - Bottom" msgstr "Kameraren ikuspegia - Behea" msgid "Camera view - Front" msgstr "Kameraren ikuspegia - Aurrea" msgid "Camera view - Behind" msgstr "Kameraren ikuspegia - Atzea" msgid "Camera Angle - Left side" msgstr "Kameraren angelua - Ezker aldea" msgid "Camera Angle - Right side" msgstr "Kameraren angelua - Eskuin aldea" msgid "Select all objects" msgstr "Hautatu objektu guztiak" msgid "Gizmo move" msgstr "Mugitzeko tresna" msgid "Gizmo rotate" msgstr "Biraketa tresna" msgid "Gizmo scale" msgstr "Eskalarako tresna" msgid "Gizmo place face on bed" msgstr "Aurpegia ohean kokatzeko tresna" msgid "Gizmo cut" msgstr "Ebakitzeko tresna" msgid "Gizmo mesh boolean" msgstr "Sare boolearrerako tresna" msgid "Gizmo FDM paint-on fuzzy skin" msgstr "FDM gainazal zimurra margotzeko tresna" msgid "Gizmo SLA support points" msgstr "SLA euskarri-puntuentzako tresna" msgid "Gizmo FDM paint-on seam" msgstr "FDM josturak margotzeko tresna" msgid "Gizmo text emboss/engrave" msgstr "Testua erliebean/grabatuta ipintzeko tresna" msgid "Gizmo measure" msgstr "Neurtzeko tresna" msgid "Gizmo assemble" msgstr "Muntatzeko tresna" msgid "Gizmo brim ears" msgstr "Belarri ertzen tresna" msgid "Zoom in" msgstr "Zooma handitu" msgid "Zoom out" msgstr "Txikiagotu zooma" msgid "Toggle printable for object/part" msgstr "Txandakatu objektuaren/piezaren inprimagarritasuna" # AI Translated msgctxt "Keyboard Shortcut" msgid "Tab" msgstr "Tab" msgid "Switch between Prepare/Preview" msgstr "Aldatu Prestatu/Aurrebista artean" # AI Translated msgctxt "Keyboard Shortcut" msgid "Space" msgstr "Zuriunea" msgid "Open actions speed dial" msgstr "Ekintzen markatze azkarra ireki" msgid "Plater" msgstr "Plaka-antolatzailea" msgid "Move: press to snap by 1mm" msgstr "Mugitu: sakatu 1 mm-ko jauzietan atxikitzeko" msgid "Support/Color Painting: adjust pen radius" msgstr "Euskarri/Kolore margotzea: doitu boligrafoaren erradioa" msgid "Support/Color Painting: adjust section position" msgstr "Euskarri/Kolore-margotzea: doitu sekzioaren posizioa" msgid "Gizmo" msgstr "Tresna" msgid "Set extruder number for the objects and parts" msgstr "Ezarri objektuen eta piezen estrusore zenbakia" msgid "Delete objects, parts, modifiers" msgstr "Ezabatu objektuak, piezak eta aldatzaileak" msgid "Select the object/part and press space to change the name" msgstr "Hautatu objektua/partea eta sakatu zuriunea izena aldatzeko" msgid "Mouse click" msgstr "Saguaren klika" msgid "Select the object/part and mouse click to change the name" msgstr "Hautatu objektua/pieza eta egin klik izena aldatzeko" msgid "Objects List" msgstr "Objektuen zerrenda" msgid "Vertical slider - Move active thumb Up" msgstr "Graduatzaile bertikala - Mugitu hatz aktiboa gora" msgid "Vertical slider - Move active thumb Down" msgstr "Graduatzaile bertikala - Mugitu hatz aktiboa behera" msgid "Horizontal slider - Move active thumb Left" msgstr "Graduatzaile horizontala - Mugitu hatz aktiboa ezkerrera" msgid "Horizontal slider - Move active thumb Right" msgstr "Graduatzaile horizontala - Mugitu hatz aktiboa eskuinera" msgid "On/Off one layer mode of the vertical slider" msgstr "Aktibatu/Desaktibatu graduatzaile bertikalaren geruza bakarreko modua" msgid "On/Off G-code window" msgstr "G-code leihoa aktibatu/desaktibatu" msgid "Move slider 5x faster" msgstr "Mugitu graduatzailea 5 aldiz azkarrago" # AI Translated msgctxt "Keyboard Shortcut" msgid "Home" msgstr "Hasiera" msgid "Horizontal slider - Move to start position" msgstr "Graduatzaile horizontala - Mugitu hasierako posiziora" # AI Translated msgctxt "Keyboard Shortcut" msgid "End" msgstr "Amaiera" msgid "Horizontal slider - Move to last position" msgstr "Graduatzaile horizontala - Mugitu azken posiziora" msgid "Release Note" msgstr "Argitalpen-oharra" #, c-format, boost-format msgid "version %s update information:" msgstr "%s bertsioaren eguneratze-informazioa:" msgid "Network plug-in update" msgstr "Sareko pluginaren eguneratzea" # AI Translated msgid "Click OK to update the Network plug-in now. If a file is in use, the update will be applied the next time Orca Slicer launches." msgstr "Egin klik Ados botoian Sareko plugina orain eguneratzeko. Fitxategiren bat erabiltzen ari bada, eguneraketa Orca Slicer hurrengoan abiaraztean aplikatuko da." # AI Translated msgid "A new Network plug-in is available. Do you want to install it?" msgstr "Sareko plugin berri bat dago eskuragarri. Instalatu nahi duzu?" #, c-format, boost-format msgid "A new Network plug-in (%s) is available. Do you want to install it?" msgstr "Sareko plugin berri bat (%s) eskuragarri dago. Instalatu nahi duzu?" msgid "New version of Orca Slicer" msgstr "OrcaSlicerren bertsio berria" msgid "Check on Microsoft Store" msgstr "Egiaztatu Microsoft Store-n" msgid "Check on GitHub" msgstr "Egiaztatu GitHub-en" msgid "Open Microsoft Store" msgstr "Ireki Microsoft Store" msgid "Skip this Version" msgstr "Saltatu bertsio hau" #, c-format, boost-format msgid "New version available: %s. Please update OrcaSlicer from the Microsoft Store." msgstr "Bertsio berria eskuragarri dago: %s. Eguneratu OrcaSlicer Microsoft Store-tik." msgid "Confirm and Update Nozzle" msgstr "Berretsi eta eguneratu pita" msgid "Connect the printer using IP and access code" msgstr "Konektatu inprimagailua IPa eta sarbide-kodea erabiliz" msgid "Try the following methods to update the connection parameters and reconnect to the printer." msgstr "Saiatu ondorengo metodoekin konexio-parametroak eguneratzeko eta inprimagailura berriro konektatzeko." msgid "1. Please confirm Orca Slicer and your printer are in the same LAN." msgstr "1. Egiaztatu OrcaSlicer eta inprimagailua LAN berean daudela." msgid "2. If the IP and Access Code below are different from the actual values on your printer, please correct them." msgstr "2. Beheko IPa eta sarbide-kodea inprimagailuko benetako balioetatik desberdinak badira, zuzendu." msgid "3. Please obtain the device SN from the printer side; it is usually found in the device information on the printer screen." msgstr "3. Eskuratu gailuaren serie-zenbakia inprimagailutik; normalean inprimagailuaren pantailako gailu-informazioan agertzen da." msgid "IP" msgstr "IP" msgid "Access Code" msgstr "Sarbide-kodea" msgid "Printer model" msgstr "Inprimagailuaren modeloa" msgid "Printer name" msgstr "Inprimagailuaren izena" msgid "Where to find your printer's IP and Access Code?" msgstr "Non aurkitu inprimagailuaren IPa eta sarbide-kodea?" msgid "How to trouble shooting" msgstr "Arazoak nola konpondu" msgid "Connect" msgstr "Konektatu" msgid "Manual Setup" msgstr "Eskuzko konfigurazioa" msgid "IP and Access Code Verified! You may close the window" msgstr "IPa eta sarbide-kodea egiaztatu dira! Leihoa itxi dezakezu" msgid "connecting..." msgstr "konektatzen..." msgid "Failed to connect to printer." msgstr "Inprimagailura konektatzeak huts egin du." msgid "Failed to publish login request." msgstr "Saioa hasteko eskaera argitaratzeak huts egin du." msgid "The printer has already been bound." msgstr "Inprimagailua lotuta dago jada." msgid "The printer mode is incorrect, please switch to LAN Only." msgstr "Inprimagailuaren modua okerra da; aldatu LAN soilik modura." msgid "Connecting to printer... The dialog will close later" msgstr "Inprimagailura konektatzen... Elkarrizketa-koadroa geroago itxiko da" msgid "Connection failed, please double check IP and Access Code" msgstr "Konexioak huts egin du; egiaztatu berriro IPa eta sarbide-kodea" msgid "" "Connection failed! If your IP and Access Code is correct, \n" "please move to step 3 for troubleshooting network issues" msgstr "" "Konexioak huts egin du! IPa eta sarbide-kodea zuzenak badira, \n" "joan 3. urratsera sare-arazoak konpontzeko" msgid "Connection failed! Please refer to the wiki page." msgstr "Konexioak huts egin du! Kontsultatu wikiaren orria." msgid "sending failed" msgstr "bidalketak huts egin du" msgid "Failed to send. Click Retry to attempt sending again. If retrying does not work, please check the reason." msgstr "Ezin izan da bidali. Egin klik Saiatu berriro aukeran berriz bidaltzeko. Berriro saiatzeak funtzionatzen ez badu, egiaztatu arrazoia." msgid "reconnect" msgstr "berrkonektatu" msgid "Air Pump" msgstr "Aire-ponpa" msgid "Laser 10W" msgstr "10 W-ko laserra" msgid "Laser 40W" msgstr "40 W-ko laserra" msgid "Cutting Module" msgstr "Ebaketa-modulua" msgid "Auto Fire Extinguishing System" msgstr "Suteak automatikoki itzaltzeko sistema" msgid "Filament Track Switch" msgstr "Filament Track Switch-a" msgid "Beta" msgstr "Beta" msgid "Update firmware" msgstr "Eguneratu firmwarea" msgid "Beta version" msgstr "Beta bertsioa" msgid "Updating" msgstr "Eguneratzen" msgid "Update failed" msgstr "Eguneratzeak huts egin du" msgid "Update successful" msgstr "Eguneratzea behar bezala egin da" msgid "Hotends on Rack" msgstr "Euskarrian dauden hotendak" msgid "Are you sure you want to update? This will take about 10 minutes. Do not turn off the power while the printer is updating." msgstr "Ziur zaude eguneratu nahi duzula? 10 minutu inguru iraungo du. Ez itzali energia inprimagailua eguneratzen ari den bitartean." msgid "An important update was detected and needs to be run before printing can continue. Do you want to update now? You can also update later from 'Update firmware'." msgstr "Eguneratze garrantzitsu bat detektatu da, eta exekutatu egin behar da inprimatzen jarraitu aurretik. Orain eguneratu nahi duzu? Geroago ere egin dezakezu «Eguneratu firmwarea» aukeratik." msgid "The firmware version is abnormal. Repairing and updating are required before printing. Do you want to update now? You can also update later on the printer or update next time you start Orca Slicer." msgstr "Firmwarearen bertsioa ez da egokia. Inprimatu aurretik konpondu eta eguneratu behar da. Orain eguneratu nahi duzu? Geroago ere egin dezakezu inprimagailutik edo OrcaSlicer abiarazten duzun hurrengoan." msgid "Extension Board" msgstr "Hedapen-plaka" #, boost-format msgid "Split into %1% parts" msgstr "Banatu %1% piezatan" msgid "Repair finished" msgstr "Konponketa amaitu da" msgid "Repair failed" msgstr "Konponketak huts egin du" msgid "Repair canceled" msgstr "Konponketa bertan behera utzi da" #, boost-format msgid "Copying of file %1% to %2% failed: %3%" msgstr "%1% fitxategia %2% helmugara kopiatzeak huts egin du: %3%" msgid "Please check any unsaved changes before updating the configuration." msgstr "Egiaztatu gorde gabeko aldaketarik dagoen konfigurazioa eguneratu aurretik." msgid "Configuration package: " msgstr "Konfigurazio-paketea: " msgid " updated to " msgstr " hona eguneratu da: " msgid "Open G-code file:" msgstr "Ireki G-code fitxategia:" msgid "One object has an empty first layer and can't be printed. Please Cut the bottom or enable supports." msgstr "Objektu batek lehen geruza hutsa du eta ezin da inprimatu. Ebaki beheko zatia edo gaitu euskarriak." #, boost-format msgid "The object has empty layers between %1% and %2% and can’t be printed." msgstr "Objektuak geruza hutsak ditu %1% eta %2% artean eta ezin da inprimatu." #, boost-format msgid "Object: %1%" msgstr "Objektua: %1%" msgid "Parts of the object at these heights may be too thin or the object may have a faulty mesh." msgstr "Altuera horietako objektu-zatiak meheegiak izan daitezke, edo objektuaren sareak akatsak izan ditzake." msgid "Process change extrusion role G-code" msgstr "Prozesua aldatzeko estrusio-funtzioaren G-codea" msgid "Filament change extrusion role G-code" msgstr "Filamentua aldatzeko estrusio-funtzioaren G-codea" msgid "No object can be printed. It may be too small." msgstr "Ezin da objekturik inprimatu. Baliteke txikiegia izatea." msgid "Your print is very close to the priming regions. Make sure there is no collision." msgstr "Zure inprimaketa purgatze-eremuetatik oso gertu dago. Ziurtatu ez dagoela talkarik." msgid "" "Failed to generate G-code for invalid custom G-code.\n" "\n" msgstr "" "Ezin izan da G-codea sortu G-code pertsonalizatu baliogabeagatik.\n" "\n" msgid "Please check the custom G-code or use the default custom G-code." msgstr "Egiaztatu G-code pertsonalizatua edo erabili G-code pertsonalizatu lehenetsia." #, boost-format msgid "Generating G-code: layer %1%" msgstr "G-codea sortzen: %1% geruza" msgid "Flush volumes matrix do not match to the correct size!" msgstr "Purgatze-bolumenen matrizearen tamaina ez da zuzena!" msgid "set_accel_and_jerk() is only supported by Klipper" msgstr "set_accel_and_jerk() Klipperrek soilik onartzen du" msgid "" "Input shaping is not supported by Marlin < 2.1.2.\n" "Check your firmware version and update your G-code flavor to ´Marlin 2´." msgstr "" "Sarrera-moldaketa ez da onartzen Marlin < 2.1.2 bertsioetan.\n" "Egiaztatu firmwarearen bertsioa eta eguneratu G-code mota ´Marlin 2´ aukerara." msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2." msgstr "Sarrera-moldaketa Klipperrek, RepRapFirmwarek eta Marlin 2k soilik onartzen dute." msgid "Grouping error: " msgstr "Taldekatze-errorea: " msgid " can not be placed in the " msgstr " ezin da hemen kokatu: " msgid "Group error in manual mode. Please check nozzle count or regroup." msgstr "Taldekatze-errorea eskuzko moduan. Egiaztatu pita kopurua edo taldekatu berriro." msgid "Internal Bridge" msgstr "Barruko zubia" msgid "undefined error" msgstr "definitu gabeko errorea" msgid "too many files" msgstr "fitxategi gehiegi" msgid "File too large" msgstr "Fitxategia handiegia da" msgid "unsupported method" msgstr "onartu gabeko metodoa" msgid "unsupported encryption" msgstr "onartu gabeko zifratzea" msgid "unsupported feature" msgstr "onartu gabeko ezaugarria" msgid "failed finding central directory" msgstr "direktorio zentrala aurkitzeak huts egin du" msgid "not a ZIP archive" msgstr "ez da ZIP artxiboa" msgid "invalid header or corrupted" msgstr "goiburu baliogabea edo hondatua" msgid "Saving to RAID is not supported." msgstr "Ez da onartzen RAID batean gordetzea." msgid "decompression failed" msgstr "deskonpresioak huts egin du" msgid "compression failed" msgstr "konpresioak huts egin du" msgid "unexpected decompressed size" msgstr "ustekabeko tamaina deskonprimatua" msgid "CRC check failed" msgstr "CRC egiaztapenak huts egin du" msgid "unsupported central directory size" msgstr "direktorio zentralaren tamaina ez da onartzen" msgid "allocation failed" msgstr "esleipenak huts egin du" msgid "file open failed" msgstr "fitxategia irekitzeak huts egin du" msgid "file create failed" msgstr "fitxategia sortzeak huts egin du" msgid "file write failed" msgstr "fitxategian idazteak huts egin du" msgid "file read failed" msgstr "fitxategia irakurtzeak huts egin du" msgid "file close failed" msgstr "fitxategia ixteak huts egin du" msgid "file seek failed" msgstr "fitxategian bilatzeak huts egin du" msgid "file stat failed" msgstr "fitxategiaren egoera irakurtzeak huts egin du" msgid "invalid parameter" msgstr "parametro baliogabea" msgid "invalid filename" msgstr "fitxategi-izen baliogabea" msgid "Buffer too small" msgstr "Bufferra txikiegia da" msgid "internal error" msgstr "barne-errorea" msgid "file not found" msgstr "fitxategia ez da aurkitu" msgid "Archive too large" msgstr "Artxiboa handiegia da" msgid "validation failed" msgstr "baliozkotzeak huts egin du" msgid "write callback failed" msgstr "idazketa-callbackak huts egin du" #, boost-format msgid "%1% is too close to exclusion area. There may be collisions when printing." msgstr "%1% bazterketa-eremutik gertuegi dago. Inprimatzean talkak gerta daitezke." #, boost-format msgid "%1% is too close to others, and collisions may be caused." msgstr "%1% besteetatik gertuegi dago, eta talkak sor daitezke." #, boost-format msgid "%1% is too tall, and collisions will be caused." msgstr "%1% altuegia da, eta talkak sortuko dira." msgid " is too close to exclusion area, there may be collisions when printing." msgstr " baztertze-eremutik gertuegi dago; talkak egon daitezke inprimatzean." msgid " is too close to clumping detection area, there may be collisions when printing." msgstr " material-metaketa detektatzeko eremutik gertuegi dago; inprimatzean talkak gerta daitezke." msgid "Prime Tower" msgstr "Purgatze-dorrea" msgid " is too close to others, and collisions may be caused.\n" msgstr " besteetatik gertuegi dago, eta talkak sor daitezke.\n" msgid " is too close to an exclusion area, and collisions will be caused.\n" msgstr " bazterketa-eremu batetik gertuegi dago, eta talkak eragingo ditu.\n" msgid " is too close to clumping detection area, and collisions will be caused.\n" msgstr " material-metaketa detektatzeko eremutik gertuegi dago, eta talkak eragingo ditu.\n" msgid "Selected nozzle temperatures are incompatible. Each filament's nozzle temperature must fall within the recommended nozzle temperature range of the other filaments. Otherwise, nozzle clogging or printer damage may occur." msgstr "Hautatutako pita-tenperaturak ez dira bateragarriak. Filamentu bakoitzaren pita-tenperaturak gainerako filamentuen gomendatutako pita-tenperatura tartean egon behar du. Bestela, pita buxatu edo inprimagailua kaltetu daiteke." msgid "Invalid recommended nozzle temperature range. The lower bound must be lower than the upper bound." msgstr "Gomendatutako pitaren tenperatura-tartea baliogabea da. Beheko mugak goiko muga baino txikiagoa izan behar du." msgid "If you still want to print, you can enable the option in Preferences / Control / Slicing / Remove mixed temperature restriction." msgstr "Hala ere inprimatu nahi baduzu, aukera hau gaitu dezakezu: Hobespenak / Kontrola / Xerratzea / Kendu tenperatura mistoen murrizketa." msgid "No extrusions under current settings." msgstr "Uneko ezarpenekin ez dago estrusiorik." msgid "Smooth mode of timelapse is not supported when \"by object\" sequence is enabled." msgstr "Timelapsearen modu leuna ez da onartzen \"objektuka\" sekuentzia gaituta dagoenean." msgid "Clumping detection is not supported when \"by object\" sequence is enabled." msgstr "Material-metaketa detektatzea ez da onartzen \"objektuz objektu\" sekuentzia gaituta dagoenean." msgid "Enabling both precise Z height and the prime tower may cause slicing errors." msgstr "Z altuera zehatza eta purgatze-dorrea batera gaitzeak xerratze-erroreak sor ditzake." msgid "A prime tower is required for clumping detection; otherwise, there may be flaws on the model." msgstr "Purgatze-dorrea behar da material-metaketa detektatzeko; bestela, modeloak akatsak izan ditzake." msgid "Please select \"By object\" print sequence to print multiple objects in spiral vase mode." msgstr "Hautatu \"Objektuka\" inprimatze-sekuentzia hainbat objektu espiral formako loreontzi moduan inprimatzeko." msgid "Spiral (vase) mode does not work when an object contains more than one material." msgstr "Espiral formako (loreontzi) moduak ez du funtzionatzen objektu batek material bat baino gehiago dituenean." #, boost-format msgid "While the object %1% itself fits the build volume, it exceeds the maximum build volume height because of material shrinkage compensation." msgstr "%1% objektua bera eraikitze-bolumenean kabitzen bada ere, gehieneko eraikitze-altuera gainditzen du materialaren uzkurdura-konpentsazioagatik." #, boost-format msgid "The object %1% exceeds the maximum build volume height." msgstr "%1% objektuak gehieneko eraikitze-bolumenaren altuera gainditzen du." #, boost-format msgid "While the object %1% itself fits the build volume, its last layer exceeds the maximum build volume height." msgstr "%1% objektua bera eraikitze-bolumenean kabitzen bada ere, azken geruzak gehieneko eraikitze-altuera gainditzen du." msgid "You might want to reduce the size of your model or change current print settings and retry." msgstr "Modeloaren tamaina txikitu edo uneko inprimatze-ezarpenak aldatu eta berriro saiatu nahi izan dezakezu." msgid "Variable layer height is not supported with Organic supports." msgstr "Geruza-altuera aldakorra ez da onartzen euskarri organikoekin." msgid "Different nozzle diameters and different filament diameters may not work well when the prime tower is enabled. It's very experimental, so please proceed with caution." msgstr "Pitaren diametro eta filamentu-diametro desberdinek agian ez dute ondo funtzionatuko purgatze-dorrea gaituta dagoenean. Oso esperimentala da; jarraitu kontuz." msgid "The Wipe Tower is currently only supported with the relative extruder addressing (use_relative_e_distances=1)." msgstr "Purgatze-dorrea oraingoz estrusorearen helbideratze erlatiboarekin soilik onartzen da (use_relative_e_distances=1)." msgid "Ooze prevention is only supported with the wipe tower when 'single_extruder_multi_material' is off." msgstr "Jarioaren prebentzioa purgatze-dorrearekin soilik onartzen da 'single_extruder_multi_material' desaktibatuta dagoenean." msgid "The prime tower is currently only supported for the Marlin, RepRap/Sprinter, RepRapFirmware and Repetier G-code flavors." msgstr "Purgatze-dorrea oraingoz Marlin, RepRap/Sprinter, RepRapFirmware eta Repetier G-code aldaeretarako soilik onartzen da." msgid "A prime tower is not supported in “By object” print." msgstr "Purgatze-dorrea ez da onartzen \"objektuz objektu\" inprimaketan." msgid "A prime tower is not supported when adaptive layer height is on. It requires that all objects have the same layer height." msgstr "Purgatze-dorrea ez da onartzen geruza-altuera egokigarria aktibatuta dagoenean. Objektu guztiek geruza-altuera bera izan behar dute." msgid "A prime tower requires any “support gap” to be a multiple of layer height." msgstr "Purgatze-dorreak \"euskarri-tarte\" oro geruza-altueraren multiploa izatea eskatzen du." msgid "A prime tower requires that all objects have the same layer height." msgstr "Purgatze-dorreak objektu guztiek geruza-altuera bera izatea eskatzen du." msgid "A prime tower requires that all objects are printed over the same number of raft layers." msgstr "Purgatze-dorreak objektu guztiak baltsa-geruza kopuru beraren gainean inprimatzea eskatzen du." msgid "The prime tower is only supported for multiple objects if they are printed with the same support_top_z_distance." msgstr "Purgatze-dorrea hainbat objektutarako soilik onartzen da support_top_z_distance bera erabiliz inprimatzen badira." msgid "A prime tower requires that all objects are sliced with the same layer height." msgstr "Purgatze-dorreak objektu guztiak geruza-altuera berarekin xerratzea eskatzen du." msgid "The prime tower is only supported if all objects have the same variable layer height." msgstr "Purgatze-dorrea objektu guztiek geruza-altuera aldakor bera badute soilik onartzen da." msgid "One or more object were assigned an extruder that the printer does not have." msgstr "Objektu bati edo gehiagori inprimagailuak ez duen estrusore bat esleitu zaio." msgid "Line width too small" msgstr "Lerro-zabalera txikiegia" msgid "Line width too large" msgstr "Lerro-zabalera handiegia" msgid "Printing with multiple extruders of differing nozzle diameters. If support is to be printed with the current filament (support_filament == 0 or support_interface_filament == 0), all nozzles have to be of the same diameter." msgstr "Pitaren diametro desberdineko hainbat estrusorerekin inprimatzen. Euskarria uneko filamentuarekin inprimatu behar bada (support_filament == 0 edo support_interface_filament == 0), pita guztiek diametro bera izan behar dute." msgid "A prime tower requires that support has the same layer height as the object." msgstr "Purgatze-dorreak euskarriak objektuaren geruza-altuera bera izatea eskatzen du." # AI Translated msgid "For Organic supports, two walls are supported only with the Hollow/Default base pattern." msgstr "Euskarri organikoetan, bi horma Hollow/Default oinarri-patroiarekin soilik onartzen dira." # AI Translated msgid "The Lightning base pattern is not supported by this support type; Rectilinear will be used instead." msgstr "Lightning oinarri-patroia ez du euskarri mota honek onartzen; Rectilinear erabiliko da horren ordez." msgid "Organic support tree tip diameter must not be smaller than support material extrusion width." msgstr "Euskarri organikoaren zuhaitz-muturraren diametroak ezin du izan euskarri-materialaren estrusio-zabalera baino txikiagoa." msgid "Organic support branch diameter must not be smaller than 2x support material extrusion width." msgstr "Euskarri organikoaren adar-diametroak ezin du izan euskarri-materialaren estrusio-zabalera halako bi baino txikiagoa." msgid "Organic support branch diameter must not be smaller than support tree tip diameter." msgstr "Euskarri organikoaren adar-diametroak ezin du izan euskarri-zuhaitzaren mutur-diametroa baino txikiagoa." # AI Translated msgid "The Hollow base pattern is not supported by this support type; Rectilinear will be used instead." msgstr "Hollow oinarri-patroia ez du euskarri mota honek onartzen; Rectilinear erabiliko da horren ordez." msgid "Support enforcers are used but support is not enabled. Please enable support." msgstr "Euskarri-behartzaileak erabiltzen dira, baina euskarria ez dago gaituta. Gaitu euskarriak." msgid "Layer height cannot exceed nozzle diameter." msgstr "Geruza-altuerak ezin du pitaren diametroa gainditu." msgid "Bridge line width must not exceed nozzle diameter" msgstr "Zubien lerro-zabalerak ez du pitaren diametroa gainditu behar" msgid "\"G92 E0\" was found in before_layer_change_gcode, but the G or E are not uppercase. Please change them to the exact uppercase \"G92 E0\"." msgstr "\"G92 E0\" aurkitu da before_layer_change_gcode-n, baina G edo E ez daude maiuskulaz. Aldatu zehazki maiuskulaz idatzitako \"G92 E0\" formara." msgid "\"G92 E0\" was found in layer_change_gcode, but the G or E are not uppercase. Please change them to the exact uppercase \"G92 E0\"." msgstr "\"G92 E0\" aurkitu da layer_change_gcode-n, baina G edo E ez daude maiuskulaz. Aldatu zehazki maiuskulaz idatzitako \"G92 E0\" formara." msgid "Relative extruder addressing requires resetting the extruder position at each layer to prevent loss of floating point accuracy. Add \"G92 E0\" to layer_gcode." msgstr "Estrusorearen helbideratze erlatiboak geruza bakoitzean estrusorearen posizioa berrezartzea eskatzen du, koma mugikorreko zehaztasuna ez galtzeko. Gehitu \"G92 E0\" layer_gcode atalean." msgid "\"G92 E0\" was found in before_layer_change_gcode, which is incompatible with absolute extruder addressing." msgstr "\"G92 E0\" aurkitu da before_layer_change_gcode atalean, eta ez da bateragarria estrusorearen helbideratze absolutuarekin." msgid "\"G92 E0\" was found in layer_change_gcode, which is incompatible with absolute extruder addressing." msgstr "\"G92 E0\" aurkitu da layer_change_gcode atalean, eta ez da bateragarria estrusorearen helbideratze absolutuarekin." #, c-format, boost-format msgid "Plate %d: %s does not support filament %s" msgstr "%d plaka: %s(e)k ez du %s filamentua onartzen" msgid "Setting the jerk speed too low could lead to artifacts on curved surfaces" msgstr "Astindu-abiadura baxuegi ezartzeak artefaktuak sor ditzake gainazal kurbatuetan" msgid "" "The jerk setting exceeds the printer's maximum jerk (machine_max_jerk_x/machine_max_jerk_y).\n" "Orca will automatically cap the jerk speed to ensure it doesn't surpass the printer's capabilities.\n" "You can adjust the maximum jerk setting in your printer's configuration to get higher speeds." msgstr "" "Astinduaren ezarpenak inprimagailuaren gehieneko astindua gainditzen du (machine_max_jerk_x/machine_max_jerk_y).\n" "Orcak automatikoki mugatuko du astindu-abiadura, inprimagailuaren gaitasunak gaindi ez ditzan.\n" "Gehieneko astinduaren ezarpena inprimagailuaren konfigurazioan doi dezakezu abiadura handiagoak lortzeko." msgid "" "Junction deviation setting exceeds the printer's maximum value (machine_max_junction_deviation).\n" "Orca will automatically cap the junction deviation to ensure it doesn't surpass the printer's capabilities.\n" "You can adjust the machine_max_junction_deviation value in your printer's configuration to get higher limits." msgstr "" "Lotura-desbideratzearen ezarpenak inprimagailuaren gehieneko balioa gainditzen du (machine_max_junction_deviation).\n" "Orcak automatikoki mugatuko du lotura-desbideratzea, inprimagailuaren gaitasunak gaindi ez ditzan.\n" "Muga handiagoak lortzeko, machine_max_junction_deviation balioa doi dezakezu inprimagailuaren konfigurazioan." msgid "" "The acceleration setting exceeds the printer's maximum acceleration (machine_max_acceleration_extruding).\n" "Orca will automatically cap the acceleration speed to ensure it doesn't surpass the printer's capabilities.\n" "You can adjust the machine_max_acceleration_extruding value in your printer's configuration to get higher speeds." msgstr "" "Azelerazio-ezarpenak inprimagailuaren gehieneko azelerazioa gainditzen du (machine_max_acceleration_extruding).\n" "Orcak automatikoki mugatuko du azelerazio-abiadura, inprimagailuaren gaitasunak gaindi ez ditzan.\n" "Inprimagailuaren konfigurazioan machine_max_acceleration_extruding balioa doi dezakezu abiadura handiagoak lortzeko." msgid "" "The travel acceleration setting exceeds the printer's maximum travel acceleration (machine_max_acceleration_travel).\n" "Orca will automatically cap the travel acceleration speed to ensure it doesn't surpass the printer's capabilities.\n" "You can adjust the machine_max_acceleration_travel value in your printer's configuration to get higher speeds." msgstr "" "Lekualdatze-azelerazioaren ezarpenak inprimagailuaren gehieneko lekualdatze-azelerazioa gainditzen du (machine_max_acceleration_travel).\n" "Orcak automatikoki mugatuko du lekualdatze-azelerazioaren abiadura, inprimagailuaren gaitasunak gaindi ez ditzan.\n" "Inprimagailuaren konfigurazioan machine_max_acceleration_travel balioa doi dezakezu abiadura handiagoak lortzeko." msgid "The precise wall option will be ignored for outer-inner or inner-outer-inner wall sequences." msgstr "Horma zehatza aukera ezikusi egingo da kanpo-barru edo barru-kanpo-barru horma-sekuentzietan." msgid "The Adaptive Pressure Advance model for one or more extruders may contain invalid values." msgstr "Estrusore baten edo gehiagoren presio-aurrerapen egokigarriaren modeloak balio baliogabeak izan ditzake." msgid "Filament shrinkage will not be used because filament shrinkage for the used filaments does not match." msgstr "Filamentuaren uzkurdura ez da erabiliko, erabilitako filamentuen uzkurdura-balioak ez datozelako bat." msgid "Generating skirt & brim" msgstr "Gona eta itsaspen ertza sortzen" msgid "" "Per-object skirts cannot fit between the objects in By object print sequence.\n" "\n" "Move the objects farther apart, reduce brim/skirt size, switch Skirt type to Combined, or switch Print sequence to By layer." msgstr "" "Objektu bakoitzaren gonak ezin dira objektuen artean egokitu Objektuka inprimatzeko sekuentzian.\n" "\n" "Aldendu objektuak, txikitu itsaspen ertzen/gonen neurria, aldatu gona mota Konbinatua aukerara edo aldatu inprimatze-sekuentzia Geruzaka aukerara." msgid "Exporting G-code" msgstr "G-codea esportatzen" msgid "Generating G-code" msgstr "G-codea sortzen" msgid "Processing of the filename_format template failed." msgstr "filename_format txantiloia prozesatzeak huts egin du." msgid "Printer technology" msgstr "Inprimagailuaren teknologia" msgid "Printable area" msgstr "Inprimatzeko eremua" msgid "Extruder printable area" msgstr "Estrusorearen inprimatze-eremua" msgid "Support parallel printheads" msgstr "Onartu inprimatze-buru paraleloak" msgid "Enable printer settings for machines that can use multiple printheads in parallel." msgstr "Gaitu inprimagailu-ezarpenak hainbat inprimatze-buru paraleloan erabil ditzaketen makinentzat." msgid "Parallel printheads count" msgstr "Inprimatze-buru paraleloen kopurua" msgid "Set the number of parallel printheads for machines like OrangeStorm Giga printer." msgstr "Ezarri OrangeStorm Giga bezalako makinetako inprimatze-buru paraleloen kopurua." msgid "Parallel printheads bed exclude areas" msgstr "Inprimatze-buru paraleloentzako oheko baztertze-eremuak" msgid "Ordered list of bed exclude areas by parallel printhead count. Item 1 applies to one printhead, item 2 to two printheads, and so on. Leave an item empty for no excluded area." msgstr "Inprimatze-buru paraleloen kopuruaren arabera ordenatutako oheko baztertze-eremuen zerrenda. 1. elementua inprimatze-buru baterako da, 2.a bi inprimatze-burutarako, eta horrela hurrenez hurren. Utzi elementu bat hutsik baztertutako eremurik ez izateko." msgid "Excluded bed area" msgstr "Oheko baztertutako eremua" msgid "Unprintable area in XY plane. For example, X1 Series printers use the front left corner to cut filament during filament change. The area is expressed as polygon by points in following format: \"XxY, XxY, ...\"" msgstr "XY planoan inprimatu ezin den eremua. Adibidez, X1 serieko inprimagailuek aurreko ezkerreko izkina erabiltzen dute filamentua mozteko filamentu-aldaketan. Eremua puntuen bidezko poligono gisa adierazten da formatu honetan: \"XxY, XxY, ...\"" msgid "Bed custom texture" msgstr "Ohearen testura pertsonalizatua" msgid "Bed custom model" msgstr "Ohearen modelo pertsonalizatua" msgid "Elephant foot compensation" msgstr "Elefante-oinaren konpentsazioa" msgid "This shrinks the first layer on the build plate to compensate for elephant foot effect." msgstr "Honek lehen geruza uzkurtzen du inprimatze-plakan, elefante-oinaren efektua konpentsatzeko." msgid "Elephant foot compensation layers" msgstr "Elefante-oinaren konpentsazio-geruzak" msgid "The number of layers on which the elephant foot compensation will be active. The first layer will be shrunk by the elephant foot compensation value, then the next layers will be linearly shrunk less, up to the layer indicated by this value." msgstr "Elefante-oinaren konpentsazioa aktibo egongo den geruza kopurua. Lehen geruza elefante-oinaren konpentsazio-balioaren arabera uzkurtuko da; hurrengo geruzak linealki gutxiago uzkurtuko dira, balio honek adierazitako geruzaraino." msgid "Elephant foot layers density" msgstr "Elefante-oinaren geruzen dentsitatea" msgid "" "Density of internal solid infill for Elephant foot layers compensation.\n" "The initial value for the second layer is set.\n" "Subsequent layers become linearly denser by the height specified in elefant_foot_compensation_layers." msgstr "" "Elefante-hankaren geruzen konpentsaziorako barruko betegarri solidoaren dentsitatea.\n" "Bigarren geruzaren hasierako balioa ezartzen da.\n" "Hurrengo geruzak linealki trinkoago bihurtzen dira elefant_foot_compensation_layers aukeran zehaztutako altueraren arabera." msgid "This is the height for each layer. Smaller layer heights give greater accuracy but longer printing time." msgstr "Hau da geruza bakoitzaren altuera. Geruza-altuera txikiagoek zehaztasun handiagoa ematen dute, baina inprimatze-denbora luzatzen dute." msgid "Printable height" msgstr "Inprimatzeko altuera" msgid "This is the maximum printable height which is limited by the height of the build area." msgstr "Hau da inprimatu daitekeen gehieneko altuera, inprimatze-eremuaren altuerak mugatua." msgid "Extruder printable height" msgstr "Estrusorearen inprimatze-altuera" msgid "Maximum printable height of this extruder which is limited by mechanism of printer." msgstr "Estrusore honen gehieneko inprimatze-altuera, inprimagailuaren mekanismoak mugatua." msgid "Preferred orientation" msgstr "Hobetsitako orientazioa" msgid "Automatically orient STL files on the Z axis upon initial import." msgstr "Orientatu automatikoki STL fitxategiak Z ardatzean lehen aldiz inportatzean." msgid "Printer preset names" msgstr "Inprimagailuaren aurrezarpen-izenak" msgid "Use 3rd-party print host" msgstr "Erabili hirugarrenen inprimatze-ostalaria" msgid "Allow controlling BambuLab's printer through 3rd party print hosts." msgstr "Baimendu BambuLab inprimagailua hirugarrenen inprimatze-ostalarien bidez kontrolatzea." msgid "Use 3MF instead of G-code" msgstr "Erabili 3MF G-codearen ordez" msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file." msgstr "Gaitu aukera hau inprimagailuak 3MF fitxategi bat inprimatze-lan gisa onartzen badu. Gaituta dagoenean, OrcaSlicerrek xerratutako fitxategia .gcode.3mf gisa bidaltzen du, .gcode fitxategi arrunt baten ordez." msgid "Printer Agent" msgstr "Inprimagailu-agentea" msgid "Select the network agent implementation for printer communication." msgstr "Hautatu inprimagailuarekin komunikatzeko sare-agentearen inplementazioa." msgid "Hostname, IP or URL" msgstr "Ostalari-izena, IPa edo URLa" msgid "Orca Slicer can upload G-code files to a printer host. This field should contain the hostname, IP address or URL of the printer host instance. Print host behind HAProxy with basic auth enabled can be accessed by putting the user name and password into the URL in the following format: https://username:password@your-octopi-address/" msgstr "OrcaSlicerrek G-code fitxategiak inprimatze-ostalari batera igo ditzake. Eremu honetan inprimatze-ostalariaren instantziaren ostalari-izena, IP helbidea edo URLa jarri behar da. HAProxyren atzean eta oinarrizko autentifikazioa gaituta duen inprimatze-ostalaria atzitzeko, erabiltzaile-izena eta pasahitza URLan jar daitezke formatu honetan: https://username:password@your-octopi-address/" msgid "Device UI" msgstr "Gailuaren interfazea" msgid "Specify the URL of your device user interface if it's not same as print_host." msgstr "Zehaztu gailuaren erabiltzaile-interfazearen URLa, print_host bera ez bada." msgid "API Key / Password" msgstr "API gakoa / Pasahitza" msgid "Orca Slicer can upload G-code files to a printer host. This field should contain the API Key or the password required for authentication." msgstr "OrcaSlicerrek G-code fitxategiak inprimatze-ostalari batera igo ditzake. Eremu honetan autentifikaziorako behar den API gakoa edo pasahitza jarri behar da." msgid "Serial Number" msgstr "Serie-zenbakia" msgid "Flashforge local API requires the printer serial number." msgstr "Flashforge-ren API lokalak inprimagailuaren serie-zenbakia behar du." msgid "Name of the printer." msgstr "Inprimagailuaren izena." msgid "HTTPS CA File" msgstr "HTTPS CA fitxategia" msgid "Custom CA certificate file can be specified for HTTPS OctoPrint connections, in crt/pem format. If left blank, the default OS CA certificate repository is used." msgstr "CA ziurtagiri-fitxategi pertsonalizatua zehaztu daiteke HTTPS OctoPrint konexioetarako, crt/pem formatuan. Hutsik utziz gero, sistema eragilearen CA ziurtagirien biltegi lehenetsia erabiliko da." msgid "User" msgstr "Erabiltzailea" msgid "Password" msgstr "Pasahitza" msgid "Ignore HTTPS certificate revocation checks" msgstr "Ez ikusi HTTPS ziurtagirien baliogabetze-egiaztapenei" msgid "Ignore HTTPS certificate revocation checks in the case of missing or offline distribution points. One may want to enable this option for self signed certificates if connection fails." msgstr "Ezikusi HTTPS ziurtagirien ezeztapen-egiaztapenak banaketa-puntuak falta direnean edo lineaz kanpo daudenean. Konexioak huts egiten badu, aukera hau gaitzea komeni da norberak sinatutako ziurtagirietarako." msgid "Names of presets related to the physical printer." msgstr "Inprimagailu fisikoari lotutako aurrezarpenen izenak." msgid "Authorization Type" msgstr "Authorization Type" msgid "API key" msgstr "API giltza" msgid "HTTP digest" msgstr "HTTP digest" msgid "Configuration for the plugin capabilities this preset uses, overriding the global Capabilities configuration. Stored as a raw JSON array and edited through the dialog behind the button, never typed in directly." msgstr "Aurrezarpen honek erabiltzen dituen plugin-gaitasunen konfigurazioa, Gaitasunen konfigurazio globala gaindituz. JSON matrize gordin gisa gordetzen da eta botoiaren atzean dagoen elkarrizketa-koadroaren bidez editatzen da, ez da inoiz zuzenean idazten." msgid "Avoid crossing walls" msgstr "Saihestu hormak gurutzatzea" msgid "This detours to avoid traveling across walls, which may cause blobs on the surface." msgstr "Honek desbideratzeak egiten ditu hormen gainetik ez mugitzeko, gainazalean pikorrak sor baitaitezke." msgid "Avoid crossing walls - Max detour length" msgstr "Saihestu hormak gurutzatzea - Geh. desbideratze-luzera" msgid "Maximum detour distance for avoiding crossing wall: The printer won't detour if the detour distance is larger than this value. Detour length could be specified either as an absolute value or as percentage (for example 50%) of a direct travel path. A value of 0 will disable this." msgstr "Hormak zeharkatzea saihesteko gehieneko desbideratze-distantzia: inprimagailuak ez du desbideratzerik egingo distantzia balio hau baino handiagoa bada. Desbideratzearen luzera balio absolutu gisa edo zuzeneko mugimendu-bidearen ehuneko gisa (adibidez, %50) zehaztu daiteke. 0 balioak aukera hau desgaitzen du." msgid "mm or %" msgstr "mm edo %" msgid "Other layers" msgstr "Beste geruzak" msgid "Bed temperature for layers except the initial one. A value of 0 means the filament does not support printing on the Cool Plate SuperTack." msgstr "Hasierakoa ez den geruzetarako ohearen tenperatura. 0 balioak filamentuak SuperTack Plaka hotzaren gainean inprimatzea ez duela onartzen esan nahi du." msgid "This is the bed temperature for layers except for the first one. A value of 0 means the filament does not support printing on the Cool Plate." msgstr "Hau da lehenengoa ez den geruzetarako ohearen tenperatura. 0 balioak filamentuak Plaka hotzaren gainean inprimatzea ez duela onartzen esan nahi du." msgid "This is the bed temperature for layers except for the first one. A value of 0 means the filament does not support printing on the Textured Cool Plate." msgstr "Hau da lehenengoa ez den geruzetarako ohearen tenperatura. 0 balioak filamentuak Testuradun plaka hotzaren gainean inprimatzea ez duela onartzen esan nahi du." msgid "This is the bed temperature for layers except for the first one. A value of 0 means the filament does not support printing on the Engineering Plate." msgstr "Hau da lehenengoa ez den geruzetarako ohearen tenperatura. 0 balioak filamentuak Ingeniaritza-plakaren gainean inprimatzea ez duela onartzen esan nahi du." msgid "This is the bed temperature for layers except for the first one. A value of 0 means the filament does not support printing on the High Temp Plate." msgstr "Hau da lehenengoa ez den geruzetarako ohearen tenperatura. 0 balioak filamentuak Tenperatura alturako plakaren gainean inprimatzea ez duela onartzen esan nahi du." msgid "This is the bed temperature for layers except for the first one. A value of 0 means the filament does not support printing on the Textured PEI Plate." msgstr "Hau da lehenengoa ez den geruzetarako ohearen tenperatura. 0 balioak filamentuak Testuradun PEI plakaren gainean inprimatzea ez duela onartzen esan nahi du." msgid "First layer" msgstr "Lehen geruza" msgid "First layer bed temperature" msgstr "Lehen geruzako ohearen tenperatura" msgid "This is the bed temperature of the first layer. A value of 0 means the filament does not support printing on the Cool Plate SuperTack." msgstr "Hau da lehen geruzako ohearen tenperatura. 0 balioak filamentuak SuperTack Plaka hotzaren gainean inprimatzea ez duela onartzen esan nahi du." msgid "This is the bed temperature of the first layer. A value of 0 means the filament does not support printing on the Cool Plate." msgstr "Hau da lehen geruzako ohearen tenperatura. 0 balioak filamentuak Plaka hotzaren gainean inprimatzea ez duela onartzen esan nahi du." msgid "This is the bed temperature of the first layer. A value of 0 means the filament does not support printing on the Textured Cool Plate." msgstr "Hau da lehen geruzako ohearen tenperatura. 0 balioak filamentuak Testuradun plaka hotzaren gainean inprimatzea ez duela onartzen esan nahi du." msgid "This is the bed temperature of the first layer. A value of 0 means the filament does not support printing on the Engineering Plate." msgstr "Hau da lehen geruzako ohearen tenperatura. 0 balioak filamentuak Ingeniaritza-plakaren gainean inprimatzea ez duela onartzen esan nahi du." msgid "This is the bed temperature of the first layer. A value of 0 means the filament does not support printing on the High Temp Plate." msgstr "Hau da lehen geruzako ohearen tenperatura. 0 balioak filamentuak Tenperatura alturako plakaren gainean inprimatzea ez duela onartzen esan nahi du." msgid "This is the bed temperature of the first layer. A value of 0 means the filament does not support printing on the Textured PEI Plate." msgstr "Hau da lehen geruzako ohearen tenperatura. 0 balioak filamentuak Testuradun PEI plakaren gainean inprimatzea ez duela onartzen esan nahi du." msgid "Plate types supported by the printer" msgstr "Inprimagailuak onartzen dituen plaka motak" msgid "Default bed type" msgstr "Ohe mota lehenetsia" msgid "Default bed type for the printer (supports both numeric and string format)." msgstr "Inprimagailuaren ohe mota lehenetsia (zenbakizko formatua eta testu-formatua onartzen ditu)." msgid "First layer print sequence" msgstr "Lehen geruzaren inprimatze-sekuentzia" msgid "Other layers print sequence" msgstr "Beste geruzen inprimatze-sekuentzia" msgid "The number of other layers print sequence" msgstr "Beste geruzen inprimatze-sekuentzien kopurua" msgid "Other layers filament sequence" msgstr "Beste geruzen filamentuen sekuentzia" msgid "This G-code is inserted at every layer change before the Z lift." msgstr "G-code hau geruza-aldaketa bakoitzean txertatzen da, Z igoeraren aurretik." msgid "Bottom shell layers" msgstr "Beheko oskol-geruzak" msgid "This is the number of solid layers of bottom shell, including the bottom surface layer. When the thickness calculated by this value is thinner than bottom shell thickness, the bottom shell layers will be increased." msgstr "Beheko oskolaren geruza solidoen kopurua da, beheko gainazal-geruza barne. Balio honekin kalkulatutako lodiera beheko oskolaren lodiera baino txikiagoa bada, beheko oskol-geruzak handituko dira." msgid "Bottom shell thickness" msgstr "Beheko oskolaren lodiera" msgid "The number of bottom solid layers is increased when slicing if the thickness calculated by bottom shell layers is thinner than this value. This can avoid having too thin a shell when layer height is small. 0 means that this setting is disabled and the thickness of the bottom shell is determined simply by the number of bottom shell layers." msgstr "Xerratzean beheko geruza solidoen kopurua handituko da beheko oskol-geruzek kalkulatutako lodiera balio hau baino txikiagoa bada. Horrela, geruza-altuera txikia denean oskola meheegia izatea saihesten da. 0 balioak ezarpena desgaituta dagoela esan nahi du, eta beheko oskolaren lodiera beheko oskol-geruzen kopuruak soilik zehaztuko du." msgid "Apply gap fill" msgstr "Aplikatu hutsuneak betetzea" msgid "" "Enables gap fill for the selected solid surfaces. The minimum gap length that will be filled can be controlled from the filter out tiny gaps option below.\n" "\n" "Options:\n" "1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces for maximum strength\n" "2. Top and Bottom surfaces: Applies gap fill to top and bottom surfaces only, balancing print speed, reducing potential over extrusion in the solid infill and making sure the top and bottom surfaces have no pinhole gaps\n" "3. Nowhere: Disables gap fill for all solid infill areas\n" "\n" "Note that if using the classic perimeter generator, gap fill may also be generated between perimeters, if a full width line cannot fit between them. That perimeter gap fill is not controlled by this setting.\n" "\n" "If you would like all gap fill, including the classic perimeter generated one, removed, set the filter out tiny gaps value to a large number, like 999999.\n" "\n" "However this is not advised, as gap fill between perimeters is contributing to the model's strength. For models where excessive gap fill is generated between perimeters, a better option would be to switch to the arachne wall generator and use this option to control whether the cosmetic top and bottom surface gap fill is generated." msgstr "" "Hautatutako gainazal solidoetarako hutsune-betetzea gaitzen du. Beteko den gutxieneko hutsune-luzera beheko hutsune txikiak iragazteko aukerarekin kontrola daiteke.\n" "\n" "Aukerak:\n" "1. Edonon: hutsune-betetzea gainazal guztiei aplikatzen die.\n" "2. Goiko eta beheko gainazaletan soilik: hutsune-betetzea goiko eta beheko gainazal ikusgaietan soilik aplikatzen du.\n" "3. Inon ez: ez du hutsune-betetzerik sortzen.\n" "\n" "Kontuan izan perimetro-sorgailu klasikoa erabiliz gero hutsune-betetzea perimetroen artean ere sor daitekeela, baldin eta zabalera osoko lerro bat ez bada sartzen. Perimetro arteko hutsune-betetze hori ez da ezarpen honekin kontrolatzen.\n" "\n" "Hutsune-betetze guztia kendu nahi baduzu, perimetro-sorgailu klasikoak sortutakoa barne, ezarri hutsune txikiak iragazteko balioa zenbaki handi batera, adibidez 999999.\n" "\n" "Hala ere, ez da gomendagarria, perimetroen arteko hutsune-betetzeak modeloaren sendotasunari laguntzen baitio. Perimetroen artean hutsune-betetze gehiegi sortzen den modeloetan, aukera hobea da Arachne horma-sorgailura aldatzea eta aukera hau erabiltzea goiko eta beheko gainazalen hutsune-betetze estetikoa sortuko den kontrolatzeko." msgid "Everywhere" msgstr "Edonon" msgid "Top and bottom surfaces" msgstr "Goiko eta beheko gainazalak" msgid "Nowhere" msgstr "Inon ez" msgid "Force cooling for overhangs and bridges" msgstr "Behartu irtengune eta zubien hoztea" msgid "Enable this option to allow adjustment of the part cooling fan speed for specifically for overhangs, internal and external bridges. Setting the fan speed specifically for these features can improve overall print quality and reduce warping." msgstr "Gaitu aukera hau pieza hozteko haizagailuaren abiadura irtenguneetarako eta barruko zein kanpoko zubietarako bereziki doitzeko. Ezaugarri horietarako haizagailu-abiadura zehazteak inprimatze-kalitate orokorra hobetu eta okertzea murriztu dezake." msgid "Overhangs and external bridges fan speed" msgstr "Irtengune eta kanpoko zubien haizagailu-abiadura" msgid "" "Use this part cooling fan speed when printing bridges or overhang walls with an overhang threshold that exceeds the value set in the 'Overhangs cooling threshold' parameter above. Increasing the cooling specifically for overhangs and bridges can improve the overall print quality of these features.\n" "\n" "Please note, this fan speed is clamped on the lower end by the minimum fan speed threshold set above. It is also adjusted upwards up to the maximum fan speed threshold when the minimum layer time threshold is not met." msgstr "" "Erabili piezaren hozte-haizagailuaren abiadura hau zubiak edo irtengune-hormak inprimatzean, irtengunearen atalaseak goiko 'Irtenguneen hozte-atalasea' parametroan ezarritako balioa gainditzen duenean. Irtengune eta zubietarako hoztea handitzeak ezaugarri horien inprimatze-kalitate orokorra hobetu dezake.\n" "\n" "Kontuan izan haizagailuaren abiadura beheko mugan goian ezarritako gutxieneko haizagailu-abiadurak mugatzen duela. Halaber, gorantz doitzen da, gehieneko haizagailu-abiaduraraino, gutxieneko geruza-denboraren atalasea betetzen ez denean." msgid "Overhang cooling activation threshold" msgstr "Irtenguneen hoztea aktibatzeko atalasea" #, no-c-format, no-boost-format msgid "When the overhang exceeds this specified threshold, force the cooling fan to run at the 'Overhang Fan Speed' set below. This threshold is expressed as a percentage, indicating the portion of each line's width that is unsupported by the layer beneath it. Setting this value to 0% forces the cooling fan to run for all outer walls, regardless of the overhang degree." msgstr "Irtenguneak zehaztutako atalase hau gainditzen duenean, behartu hozte-haizagailua behean ezarritako 'Irtengunearen haizagailuaren abiadura'-n martxan jartzera. Atalase hau ehuneko gisa adierazten da, lerro bakoitzaren zabaleraren azpiko geruzak onartzen ez duen zatia adieraziz. Balio hau % 0-ra ezartzeak hozte-haizagailua kanpoko horma guztietan martxan jartzera behartzen du, irtengunearen maila edozein dela ere." msgid "External bridge infill direction" msgstr "Kanpoko zubien betegarri-norabidea" #, no-c-format, no-boost-format msgid "" "External Bridging angle override.\n" "If left to zero, the bridging angle will be calculated automatically for each specific bridge.\n" "Otherwise the provided angle will be used according to:\n" " - The absolute coordinates\n" " - The absolute coordinates + Model rotation: If Align directions to model is enabled\n" " - The optimal automatic angle + this value: If 'Relative Bridge Angle' is enabled\n" "\n" "Use 180° for zero absolute angle." msgstr "" "Kanpoko zubien angeluaren gainidazketa.\n" "0 uzten bada, zubi bakoitzaren angelua automatikoki kalkulatuko da.\n" "Bestela, emandako angelua honela erabiliko da:\n" " - Koordenatu absolutuak\n" " - Koordenatu absolutuak + modeloaren biraketa: 'Lerrokatu norabideak modeloarekin' gaituta badago\n" " - Angelu automatiko optimoa + balio hau: 'Zubi-angelu erlatiboa' gaituta badago\n" "\n" "Erabili 180° zero angelu absoluturako." msgid "Internal bridge infill direction" msgstr "Barruko zubien betegarri-norabidea" msgid "" "Internal Bridging angle override.\n" "If left to zero, the bridging angle will be calculated automatically for each specific bridge.\n" "Otherwise the provided angle will be used according to:\n" " - The absolute coordinates\n" " - The absolute coordinates + Model rotation: If Align directions to model is enabled\n" " - The optimal automatic angle + this value: If 'Relative Bridge Angle' is enabled\n" "\n" "Use 180° for zero absolute angle." msgstr "" "Barruko zubien angeluaren gainidazketa.\n" "0 uzten bada, zubi bakoitzaren angelua automatikoki kalkulatuko da.\n" "Bestela, emandako angelua honela erabiliko da:\n" " - Koordenatu absolutuak\n" " - Koordenatu absolutuak + modeloaren biraketa: 'Lerrokatu norabideak modeloarekin' gaituta badago\n" " - Angelu automatiko optimoa + balio hau: 'Zubi-angelu erlatiboa' gaituta badago\n" "\n" "Erabili 180° zero angelu absoluturako." msgid "Relative bridge angle" msgstr "Zubi-angelu erlatiboa" msgid "When enabled, the bridge angle values are added to the automatically calculated bridge direction instead of overriding it." msgstr "Gaituta dagoenean, zubi-angeluaren balioak automatikoki kalkulatutako zubi-norabideari gehitzen zaizkio, hura ordeztu beharrean." msgid "External bridge density" msgstr "Kanpoko zubien dentsitatea" msgid "" "Controls the density (spacing) of external bridge lines.\n" "Theoretically, 100% means a solid bridge, but due to the tendency of bridge extrusions to sag, 100% may not be sufficient.\n" "\n" "- Higher than 100% density (Recommended Max 125%):\n" " - Pros: Produces smoother bridge surfaces, as overlapping lines provide additional support during printing.\n" " - Cons: Can cause overextrusion, which may reduce lower and upper surface quality and increase the risk of warping.\n" "\n" "- Lower than 100% density (Min 10%):\n" " - Pros: Can create a string-like first layer. Faster and with better cooling because there is more space for air to circulate around the extruded bridge.\n" " - Cons: May lead to sagging and poorer surface finish." msgstr "" "Kanpoko zubi-lerroen dentsitatea (tartea) kontrolatzen du.\n" "Teorian, %100ek zubi trinkoa esan nahi du, baina zubi-estrusioek beherantz okertzeko joera dutenez, baliteke %100 nahikoa ez izatea.\n" "\n" "- %100etik gorako dentsitatea (gomendatutako gehienekoa: %125):\n" " - Alde onak: zubi-gainazal leunagoak sortzen ditu, gainjarritako lerroek euskarri gehigarria ematen dutelako inprimatzean.\n" " - Alde txarrak: gainestrusioa eragin dezake; horrek beheko eta goiko gainazalen kalitatea murriztu eta deformazio-arriskua handitu dezake.\n" "\n" "- %100etik beherako dentsitatea (gutxienekoa: %10):\n" " - Alde onak: hari-itxurako lehen geruza sor dezake. Azkarragoa da eta hozte hobea ematen du, aireak zubi estruituaren inguruan zirkulatzeko leku gehiago duelako.\n" " - Alde txarrak: beheranzko okertzea eta gainazal-akabera eskasagoa eragin ditzake." msgid "Internal bridge density" msgstr "Barruko zubien dentsitatea" msgid "" "Controls the density (spacing) of internal bridge lines.\n" "Internal bridges act as intermediate support between sparse infill and top solid infill and can strongly affect top surface quality.\n" "\n" "- Higher than 100% density (Recommended Max 125%):\n" " - Pros: Improves internal bridge strength and support under top layers, reducing sagging and improving top-surface finish.\n" " - Cons: Increases material use and print time; excessive density may cause overextrusion and internal stresses.\n" "\n" "- Lower than 100% density (Min 10%):\n" " - Pros: Can reduce pillowing and improve cooling (more airflow through the bridge), and may speed up printing.\n" " - Cons: May reduce internal support, increasing the risk of sagging and top surface defects.\n" "\n" "This option works particularly well when combined with the second internal bridge over infill option to improve bridging further before solid infill is extruded." msgstr "" "Barruko zubi-lerroen dentsitatea (tartea) kontrolatzen du.\n" "Barruko zubiek tarteko euskarri gisa jarduten dute dentsitate baxuko betegarriaren eta goiko betegarri solidoaren artean, eta goiko gainazalaren kalitatean eragin handia izan dezakete.\n" "\n" "- %100etik gorako dentsitatea (gomendatutako gehienekoa: %125):\n" " - Alde onak: barruko zubiaren sendotasuna eta goiko geruzen azpiko euskarria hobetzen ditu, beheranzko okertzea murriztuz eta goiko gainazalaren akabera hobetuz.\n" " - Alde txarrak: material-erabilera eta inprimatze-denbora handitzen ditu; gehiegizko dentsitateak gainestrusioa eta barne-tentsioak eragin ditzake.\n" "\n" "- %100etik beherako dentsitatea (gutxienekoa: %10):\n" " - Alde onak: burko-efektua murriztu eta hoztea hobetu dezake (aire-fluxu handiagoa zubian zehar), eta inprimatzea azkartu dezake.\n" " - Alde txarrak: barruko euskarria murriztu dezake, beheranzko okertzea eta goiko gainazaleko akatsak izateko arriskua handituz.\n" "\n" "Aukera honek bereziki ondo funtzionatzen du betegarriaren gaineko bigarren barruko zubiarekin konbinatuta, betegarri solidoa estruitu aurretik zubigintza gehiago hobetzeko." msgid "Bridge flow ratio" msgstr "Zubien fluxu-ratioa" msgid "" "This value governs the thickness of the external (visible) bridge layer.\n" "Values above 1.0: Increase the amount of material while maintaining line spacing. This can improve line contact and strength.\n" "Values below 1.0: Reduce the amount of material while adjusting line spacing to maintain contact. This can improve sagging.\n" "\n" "The actual bridge flow used is calculated by multiplying this value with the filament flow ratio, and if set, the object's flow ratio." msgstr "" "Balio honek kanpoko zubi-geruzaren (ikusgaiaren) lodiera kontrolatzen du.\n" "1,0tik gorako balioek material-kantitatea handitzen dute lerroen arteko tartea mantenduz; horrek lerroen kontaktua eta sendotasuna hobetu ditzake.\n" "1,0tik beherako balioek material-kantitatea murrizten dute, kontaktua mantentzeko lerroen arteko tartea doituz; horrek makurdura murriztu dezake.\n" "\n" "Erabilitako benetako zubi-fluxua balio hau filamentuen fluxu-erlazioarekin eta, ezarrita badago, objektuaren fluxu-erlazioarekin biderkatuta kalkulatzen da." msgid "" "Line width of the Bridge. If expressed as a %, it will be computed over the nozzle diameter.\n" "Recommended to use with a higher Bridge density or Bridge flow ratio.\n" "\n" "The maximum value is 100% or the nozzle diameter.\n" "If set to 0, the line width will match the Internal solid infill width." msgstr "" "Zubiaren lerro-zabalera. % gisa adierazten bada, pitaren diametroaren arabera kalkulatuko da.\n" "Zubi-dentsitate handiagoarekin edo zubiaren fluxu-erlazio handiagoarekin erabiltzea gomendatzen da.\n" "\n" "Gehieneko balioa %100 edo pitaren diametroa da.\n" "0 ezartzen bada, lerro-zabalera barruko betegarri solidoaren zabalerarekin bat etorriko da." msgid "Internal bridge flow ratio" msgstr "Barruko zubien fluxu-ratioa" msgid "" "This value governs the thickness of the internal bridge layer. This is the first layer over sparse infill so increasing it may increase strength and upper layer quality.\n" "Values above 1.0: Increase the amount of material while maintaining line spacing. This can improve line contact and strength.\n" "Values below 1.0: Reduce the amount of material while adjusting line spacing to maintain contact. This can improve sagging.\n" "\n" "The actual bridge flow used is calculated by multiplying this value with the filament flow ratio, and if set, the object's flow ratio." msgstr "" "Balio honek barruko zubi-geruzaren lodiera kontrolatzen du. Dentsitate baxuko betegarriaren gaineko lehen geruza denez, handitzeak sendotasuna eta goiko geruzen kalitatea hobetu ditzake.\n" "1,0tik gorako balioek material-kantitatea handitzen dute lerroen arteko tartea mantenduz; horrek lerroen kontaktua eta sendotasuna hobetu ditzake.\n" "1,0tik beherako balioek material-kantitatea murrizten dute, kontaktua mantentzeko lerroen arteko tartea doituz; horrek makurdura murriztu dezake.\n" "\n" "Erabilitako benetako zubi-fluxua balio hau filamentuen fluxu-erlazioarekin eta, ezarrita badago, objektuaren fluxu-erlazioarekin biderkatuta kalkulatzen da." msgid "Top surface flow ratio" msgstr "Goiko gainazalaren fluxu-ratioa" msgid "" "This factor affects the amount of material for top solid infill. You can decrease it slightly to have smooth surface finish.\n" "\n" "The actual top surface flow used is calculated by multiplying this value with the filament flow ratio, and if set, the object's flow ratio." msgstr "" "Faktore honek goiko betegarri solidorako material-kopuruan eragiten du. Pixka bat txikitu dezakezu gainazal-akabera leuna lortzeko.\n" "\n" "Erabilitako goiko gainazalaren fluxu erreala balio hau filamentuaren fluxu-ratioarekin eta, ezarrita badago, objektuaren fluxu-ratioarekin biderkatuz kalkulatzen da." msgid "Bottom surface flow ratio" msgstr "Beheko gainazalaren fluxu-ratioa" msgid "" "This factor affects the amount of material for bottom solid infill.\n" "\n" "The actual bottom solid infill flow used is calculated by multiplying this value with the filament flow ratio, and if set, the object's flow ratio." msgstr "" "Faktore honek beheko betegarri solidorako material-kopuruan eragiten du.\n" "\n" "Erabilitako beheko betegarri solidoaren fluxu erreala balio hau filamentuaren fluxu-ratioarekin eta, ezarrita badago, objektuaren fluxu-ratioarekin biderkatuz kalkulatzen da." msgid "Set other flow ratios" msgstr "Ezarri beste fluxu-erlazioak" msgid "Change flow ratios for other extrusion path types." msgstr "Aldatu beste estrusio-ibilbide mota batzuen fluxu-erlazioak." msgid "First layer flow ratio" msgstr "Lehen geruzaren fluxu-erlazioa" msgid "" "This factor affects the amount of material on the first layer for the extrusion path roles listed in this section.\n" "\n" "For the first layer, the actual flow ratio for each path role (does not affect brims and skirts) will be multiplied by this value." msgstr "" "Faktore honek atal honetan zerrendatutako estrusio-ibilbideen rolek lehen geruzan duten material-kantitateari eragiten dio.\n" "\n" "Lehenengo geruzarako, ibilbide-rol bakoitzaren benetako fluxu-erlazioa (ez die eragiten itsaspen ertzei eta gonei) balio honekin biderkatuko da." msgid "Outer wall flow ratio" msgstr "Kanpoko hormaren fluxu-erlazioa" msgid "" "This factor affects the amount of material for outer walls.\n" "\n" "The actual outer wall flow used is calculated by multiplying this value by the filament flow ratio, and if set, the object's flow ratio." msgstr "" "Faktore honek kanpoko hormetarako material-kantitateari eragiten dio.\n" "\n" "Erabilitako benetako kanpoko hormaren fluxua balio hau filamentuen fluxu-erlazioarekin eta, ezarrita badago, objektuaren fluxu-erlazioarekin biderkatuta kalkulatzen da." msgid "Inner wall flow ratio" msgstr "Barruko hormaren fluxu-erlazioa" msgid "" "This factor affects the amount of material for inner walls.\n" "\n" "The actual inner wall flow used is calculated by multiplying this value by the filament flow ratio, and if set, the object's flow ratio." msgstr "" "Faktore honek barruko hormetarako material-kantitateari eragiten dio.\n" "\n" "Erabilitako benetako barruko hormaren fluxua balio hau filamentuen fluxu-erlazioarekin eta, ezarrita badago, objektuaren fluxu-erlazioarekin biderkatuta kalkulatzen da." msgid "Overhang flow ratio" msgstr "Irtenguneen fluxu-erlazioa" msgid "" "This factor affects the amount of material for overhangs.\n" "\n" "The actual overhang flow used is calculated by multiplying this value by the filament flow ratio, and if set, the object's flow ratio." msgstr "" "Faktore honek irtenguneetarako material-kantitateari eragiten dio.\n" "\n" "Erabilitako benetako irtenguneen fluxua balio hau filamentuen fluxu-erlazioarekin eta, ezarrita badago, objektuaren fluxu-erlazioarekin biderkatuta kalkulatzen da." msgid "Sparse infill flow ratio" msgstr "Dentsitate baxuko betegarriaren fluxu-erlazioa" msgid "" "This factor affects the amount of material for sparse infill.\n" "\n" "The actual sparse infill flow used is calculated by multiplying this value by the filament flow ratio, and if set, the object's flow ratio." msgstr "" "Faktore honek dentsitate baxuko betegarrirako material-kantitateari eragiten dio.\n" "\n" "Erabilitako benetako dentsitate baxuko betegarriaren fluxua balio hau filamentuen fluxu-erlazioarekin eta, ezarrita badago, objektuaren fluxu-erlazioarekin biderkatuta kalkulatzen da." msgid "Internal solid infill flow ratio" msgstr "Barruko betegarri solidoaren fluxu-erlazioa" msgid "" "This factor affects the amount of material for internal solid infill.\n" "\n" "The actual internal solid infill flow used is calculated by multiplying this value by the filament flow ratio, and if set, the object's flow ratio." msgstr "" "Faktore honek barruko betegarri solidorako material-kantitateari eragiten dio.\n" "\n" "Erabilitako benetako barruko betegarri solidoaren fluxua balio hau filamentuen fluxu-erlazioarekin eta, ezarrita badago, objektuaren fluxu-erlazioarekin biderkatuta kalkulatzen da." msgid "Gap fill flow ratio" msgstr "Hutsuneak betetzeko fluxu-erlazioa" msgid "" "This factor affects the amount of material for filling the gaps.\n" "\n" "The actual gap filling flow used is calculated by multiplying this value by the filament flow ratio, and if set, the object's flow ratio." msgstr "" "Faktore honek hutsuneak betetzeko material-kantitateari eragiten dio.\n" "\n" "Erabilitako benetako hutsune-betetzearen fluxua balio hau filamentuen fluxu-erlazioarekin eta, ezarrita badago, objektuaren fluxu-erlazioarekin biderkatuta kalkulatzen da." msgid "Support flow ratio" msgstr "Euskarriaren fluxu-erlazioa" msgid "" "This factor affects the amount of material for support.\n" "\n" "The actual support flow used is calculated by multiplying this value by the filament flow ratio, and if set, the object's flow ratio." msgstr "" "Faktore honek euskarrirako material-kantitateari eragiten dio.\n" "\n" "Erabilitako benetako euskarriaren fluxua balio hau filamentuen fluxu-erlazioarekin eta, ezarrita badago, objektuaren fluxu-erlazioarekin biderkatuta kalkulatzen da." msgid "Support interface flow ratio" msgstr "Euskarri-interfazearen fluxu-erlazioa" msgid "" "This factor affects the amount of material for the support interface.\n" "\n" "The actual support interface flow used is calculated by multiplying this value by the filament flow ratio, and if set, the object's flow ratio." msgstr "" "Faktore honek euskarri-interfazerako material-kantitateari eragiten dio.\n" "\n" "Erabilitako benetako euskarri-interfazearen fluxua balio hau filamentuen fluxu-erlazioarekin eta, ezarrita badago, objektuaren fluxu-erlazioarekin biderkatuta kalkulatzen da." msgid "Precise wall" msgstr "Horma zehatza" msgid "Improve shell precision by adjusting outer wall spacing. This also improves layer consistency. NOTE: This option will be ignored for outer-inner or inner-outer-inner wall sequences." msgstr "Doitu kanpoko hormen tartea oskolaren zehaztasuna hobetzeko. Geruzen koherentzia ere hobetzen du. OHARRA: aukera hau ez da kontuan hartuko kanpo-barru edo barru-kanpo-barru horma-sekuentzietan." msgid "Only one wall on top surfaces" msgstr "Horma bakarra goiko gainazaletan" # AI Translated msgid "Use only one wall on flat top surfaces, to give more space to the top infill pattern." msgstr "Erabili horma bakarra goiko gainazal lauetan, goiko betegarri-patroiari leku gehiago emateko." msgid "One wall threshold" msgstr "Horma bakarraren atalasea" #, no-c-format, no-boost-format msgid "" "If a top surface has to be printed and it's partially covered by another layer, it won't be considered at a top layer where its width is below this value. This can be useful to not let the 'one perimeter on top' trigger on surface that should be covered only by perimeters. This value can be a mm or a % of the perimeter extrusion width.\n" "Warning: If enabled, artifacts can be created if you have some thin features on the next layer, like letters. Set this setting to 0 to remove these artifacts." msgstr "" "Goiko gainazal bat inprimatu behar bada eta beste geruza batek partzialki estaltzen badu, ez da goiko geruzatzat hartuko haren zabalera balio honetatik beherakoa denean. Baliagarria izan daiteke 'perimetro bakarra goian' aukera aktibatzea saihesteko, gainazal hori perimetroek soilik estali beharko luketenean. Balio hau mm-tan edo perimetroaren estrusio-zabaleraren %-tan eman daiteke.\n" "Abisua: gaituta badago, artefaktuak sor daitezke hurrengo geruzan ezaugarri meheak badaude, adibidez letrak. Ezarri ezarpen hau 0 balioan artefaktu horiek kentzeko." msgid "Only one wall on first layer" msgstr "Horma bakarra lehen geruzan" # AI Translated msgid "Use only one wall on first layer, to give more space to the bottom infill pattern." msgstr "Erabili horma bakarra lehen geruzan, beheko betegarri-patroiari leku gehiago emateko." msgid "Extra perimeters on overhangs" msgstr "Perimetro gehigarriak irtenguneetan" msgid "Create additional perimeter paths over steep overhangs and areas where bridges cannot be anchored." msgstr "Sortu perimetro-ibilbide gehigarriak irtengune malkartsuetan eta zubiak ainguratu ezin diren eremuetan." msgid "Reverse on even" msgstr "Alderantzikatu bikoitietan" msgid "Overhang reversal" msgstr "Irtenguneen alderantzikatzea" # AI Translated msgid "" "Extrude perimeters that have a part over an overhang in the reverse direction on even layers. This alternating pattern can drastically improve steep overhangs.\n" "\n" "This setting can also help reduce part warping due to the reduction of stresses in the part walls." msgstr "" "Estruitu irtengune baten gaineko zatia duten perimetroak alderantziz geruza bikoitietan. Txandakako patroi honek irtengune malkartsuak nabarmen hobetu ditzake.\n" "\n" "Ezarpen honek piezaren okertzea murrizten ere lagun dezake, piezaren hormetako tentsioak murrizten direlako." msgid "Reverse only internal perimeters" msgstr "Alderantzikatu barruko perimetroak soilik" msgid "" "Apply the reverse perimeters logic only on internal perimeters.\n" "\n" "This setting greatly reduces part stresses as they are now distributed in alternating directions. This should reduce part warping while also maintaining external wall quality. This feature can be very useful for warp prone material, like ABS/ASA, and also for elastic filaments, like TPU and Silk PLA. It can also help reduce warping on floating regions over supports.\n" "\n" "For this setting to be the most effective, it is recommended to set the Reverse Threshold to 0 so that all internal walls print in alternating directions on even layers irrespective of their overhang degree." msgstr "" "Aplikatu alderantzizko perimetroen logika barruko perimetroetan soilik.\n" "\n" "Ezarpen honek piezaren tentsioak asko murrizten ditu, norabide txandakatuetan banatzen direlako. Horrek piezaren okertzea murriztu beharko luke, kanpoko hormaren kalitatea mantenduz. Ezaugarri hau oso erabilgarria izan daiteke okertzeko joera duten materialetan, hala nola ABS/ASA, eta baita filamentu elastikoetan ere, hala nola TPU eta Silk PLA. Euskarrien gaineko eskualde flotatzaileetan okertzea murrizten ere lagun dezake.\n" "\n" "Ezarpen hau eraginkorrena izan dadin, gomendatzen da Alderantzikatze-atalasea 0 balioan ezartzea, barruko horma guztiak geruza bikoitietan norabide txandakatuetan inprimatzeko, haien irtengune-maila edozein dela ere." msgid "Bridge counterbore holes" msgstr "Zubitu ahozabaldura-zuloak" msgid "" "This option creates bridges for counterbore holes, allowing them to be printed without support. Available modes include:\n" "1. None: No bridge is created\n" "2. Partially Bridged: Only a part of the unsupported area will be bridged\n" "3. Sacrificial Layer: A full sacrificial bridge layer is created" msgstr "" "Aukera honek zubiak sortzen ditu hondoratze zilindrikoetarako, euskarririk gabe inprimatu ahal izateko. Modu erabilgarriak:\n" "1. Bat ere ez: ez da zubirik sortzen\n" "2. Partzialki zubiturik: euskarririk gabeko eremuaren zati bat bakarrik zubituko da\n" "3. Sakrifizio-geruza: sakrifiziozko zubi-geruza oso bat sortzen da" msgid "Partially bridged" msgstr "Partzialki zubitua" msgid "Sacrificial layer" msgstr "Sakrifizio-geruza" msgid "Reverse threshold" msgstr "Alderantzikatze-atalasea" msgid "Overhang reversal threshold" msgstr "Irtenguneak alderantzikatzeko atalasea" #, no-c-format, no-boost-format msgid "" "Number of mm the overhang need to be for the reversal to be considered useful. Can be a % of the perimeter width.\n" "Value 0 enables reversal on every even layers regardless.\n" "When Detect overhang wall is not enabled, this option is ignored and reversal happens on every even layers regardless." msgstr "" "Alderantzikatzea erabilgarria dela kontuan hartzeko irtenguneak behar duen mm kopurua. Perimetroaren zabaleraren %-tan ere eman daiteke.\n" "0 balioak geruza bikoiti guztietan alderantzikatzea gaitzen du.\n" "Irtengune-horma detektatzea gaituta ez badago, aukera hau ez da kontuan hartzen eta alderantzikatzea geruza bikoiti guztietan gertatzen da." msgid "Slow down for overhangs" msgstr "Moteldu irtenguneetan" msgid "Enable this option to slow down when printing overhangs. The speeds for different overhang percentages are set below." msgstr "Gaitu aukera hau irtenguneak inprimatzean abiadura moteltzeko. Irtenguneen ehuneko desberdinetarako abiadurak behean ezartzen dira." msgid "Slow down for curled perimeters" msgstr "Moteldu kiribildutako perimetroetan" #, no-c-format, no-boost-format msgid "" "Enable this option to slow down printing in areas where perimeters may have curled upwards.\n" "For example, additional slowdown will be applied when printing overhangs on sharp corners like the front of the Benchy hull, reducing curling which compounds over multiple layers.\n" "\n" "It is generally recommended to have this option switched on unless your printer cooling is powerful enough or the print speed is slow enough that perimeter curling does not happen. \n" "If printing with a high external perimeter speed, this parameter may introduce wall artifacts when slowing down, due to the potentially large variance in print speeds causing the extruder to be unable to keep up with the requested flow change.\n" "Root cause of these artifacts is most likely PA tuning being slightly off, especially when combined with a high PA smooth time.\n" "\n" "Recommendations when enabling this option:\n" "1. Reduce Pressure Advance smooth time to 0.015 - 0.02 so the extruder reacts quickly to the speed changes.\n" "2. Increase the minimum print speeds to limit the magnitude of the slowdown and reduce the variance between fast and slow segments.\n" "3. If artifacts still appear, enable Extrusion Rate Smoothing (ERS) to further smooth the flow transitions.\n" "\n" "Note: When this option is enabled, overhang perimeters are treated like overhangs, meaning the overhang speed is applied even if the overhanging perimeter is part of a bridge.\n" "For example, when the perimeters are 100% overhanging, with no wall supporting them from underneath, the 100% overhang speed will be applied." msgstr "" "Gaitu aukera hau perimetroak gorantz kizkurtu daitezkeen eremuetan inprimatze-abiadura moteltzeko.\n" "Adibidez, moteltze gehigarria aplikatuko da Benchy ontziaren aurrealdeko ertz zorrotzetan bezalako irtenguneak inprimatzean, geruzaz geruza metatzen den kizkurtzea murrizteko.\n" "\n" "Oro har, aukera hau aktibatuta edukitzea gomendatzen da, inprimagailuaren hoztea oso indartsua ez bada edo abiadura nahikoa motela ez bada perimetroak ez kizkurtzeko.\n" "Kanpoko perimetro-abiadura handiarekin inprimatzean, parametro honek horma-akatsak sor ditzake moteltzean, abiadura-alde handiek estrusoreari eskatutako fluxu-aldaketari jarraitzea eragotz diezaioketelako.\n" "Akats horien arrazoia PA doikuntza apur bat oker egotea izan ohi da, bereziki PA leuntze-denbora handiarekin batera.\n" "\n" "Aukera hau gaitzean gomendioak:\n" "1. Murriztu Pressure Advance leuntze-denbora 0.015 - 0.02 baliora, estrusoreak abiadura-aldaketei azkar erantzun diezaien.\n" "2. Handitu gutxieneko inprimatze-abiadurak moteltzearen neurria eta segmentu azkar eta motelen arteko aldea mugatzeko.\n" "3. Akatsak agertzen badira, gaitu Extrusion Rate Smoothing (ERS) fluxu-trantsizioak gehiago leuntzeko.\n" "\n" "Oharra: aukera hau gaituta dagoenean, irtenguneen perimetroak irtengune gisa tratatzen dira; beraz, irtenguneen abiadura aplikatuko da perimetroa zubi baten parte bada ere.\n" "Adibidez, perimetroak %100 irtengunean daudenean eta azpitik eusten dien hormarik ez dagoenean, %100eko irtenguneetako abiadura aplikatuko da." msgid "mm/s or %" msgstr "mm/s edo %" msgid "" "Speed of the externally visible bridge extrusions.\n" "\n" "In addition, if Slow down for curled perimeters is disabled or Classic overhang mode is enabled, it will be the print speed of overhang walls that are supported by less than 13%, whether they are part of a bridge or an overhang." msgstr "" "Kanpotik ikusgai dauden zubi-estrusioen abiadura.\n" "\n" "Gainera, perimetro kiribilduetarako moteltzea desgaituta badago edo irtengune-modu klasikoa gaituta badago, %13 baino gutxiagoz eutsita dauden irtengune-hormen inprimatze-abiadura izango da, zubi baten edo irtengune baten parte izan." msgid "Speed of internal bridges. If the value is expressed as a percentage, it will be calculated based on the bridge_speed. Default value is 150%." msgstr "Barru-zubien abiadura. Balioa ehuneko gisa adierazten bada, Zubien abiadura-ren arabera kalkulatuko da. Lehenetsitako balioa % 150ekoa da." msgid "Brim width" msgstr "Itsaspen ertzaren zabalera" msgid "This is the distance from the model to the outermost brim line." msgstr "Hau da modelotik itsaspen ertzaren kanporen lerrora dagoen distantzia." msgid "Brim type" msgstr "Itsaspen ertz mota" msgid "This controls the generation of the brim at outer and/or inner side of models. Auto means the brim width is analyzed and calculated automatically." msgstr "Honek modeloen kanpoaldean eta/edo barrualdean sortzen den itsaspen ertzaren sorrera kontrolatzen du. 'Auto' aukerak esan nahi du itsaspen ertzaren zabalera automatikoki aztertu eta kalkulatzen dela." msgid "Brim-object gap" msgstr "Itsaspen ertza-objektu tartea" msgid "This creates a gap between the innermost brim line and the object and can make the brim easier to remove." msgstr "Honek tarte bat sortzen du itsaspen ertzaren barruren dagoen lerroaren eta objektuaren artean, itsaspen ertza errazago kentzeko." msgid "Brim flow ratio" msgstr "Itsaspen ertzaren fluxu-erlazioa" msgid "" "This factor affects the amount of material for brims.\n" "\n" "The actual brim flow used is calculated by multiplying this value by the filament flow ratio, and if set, the object's flow ratio.\n" "\n" "Note: The resulting value will not be affected by the first-layer flow ratio." msgstr "" "Faktore honek itsaspen ertzetarako material-kantitateari eragiten dio.\n" "\n" "Erabilitako benetako itsaspen ertzaren fluxuaren balioa filamentuen fluxu-erlazioarekin eta, ezarrita badago, objektuaren fluxu-erlazioarekin biderkatuta kalkulatzen da.\n" "\n" "Oharra: emaitzako balioari ez dio lehen geruzaren fluxu-erlazioak eragingo." msgid "Brim follows compensated outline" msgstr "Itsaspen ertzak konpentsatutako ingeradari jarraitzen dio" msgid "" "When enabled, the brim is aligned with the first-layer perimeter geometry after Elephant Foot Compensation is applied.\n" "This option is intended for cases where Elephant Foot Compensation significantly alters the first-layer footprint.\n" "\n" "If your current setup already works well, enabling it may be unnecessary and can cause the brim to fuse with upper layers." msgstr "" "Gaituta dagoenean, itsaspen ertza lehen geruzako perimetro-geometriarekin lerrokatzen da Elefante-hankaren konpentsazioa aplikatu ondoren.\n" "Aukera hau Elefante-hankaren konpentsazioak lehen geruzaren aztarna nabarmen aldatzen duen kasuetarako da.\n" "\n" "Uneko konfigurazioak ondo funtzionatzen badu, baliteke gaitzea beharrezkoa ez izatea, eta itsaspen ertza goiko geruzekin fusionatzea eragin dezake." msgid "Combine brims" msgstr "Konbinatu itsaspen ertzak" msgid "Combine multiple brims into one when they are close to each other. This can improve brim adhesion." msgstr "Konbinatu elkarrengandik gertu dauden hainbat itsaspen ertz bakar batean. Horrek ertzen itsaspena hobetu dezake." msgid "Brim ears" msgstr "Ertz-belarriak" msgid "Only draw brim over the sharp edges of the model." msgstr "Marraztu itsaspen ertza modeloaren ertz zorrotzetan soilik." msgid "Brim ear max angle" msgstr "Ertz-belarriaren geh. angelua" msgid "" "Maximum angle to let a brim ear appear.\n" "If set to 0, no brim will be created.\n" "If set to ~180, brim will be created on everything but straight sections." msgstr "" "Ertz-belarri bat agertzeko gehieneko angelua.\n" "0 ezarriz gero, ez da ertzik sortuko.\n" "~180 ezarriz gero, ertza atal zuzenetan izan ezik guztian sortuko da." msgid "Brim ear detection radius" msgstr "Ertz-belarriak detektatzeko erradioa" msgid "" "The geometry will be decimated before detecting sharp angles. This parameter indicates the minimum length of the deviation for the decimation.\n" "0 to deactivate." msgstr "" "Geometria sinplifikatu egingo da angelu zorrotzak detektatu aurretik. Parametro honek sinplifikaziorako desbideratzearen gutxieneko luzera adierazten du.\n" "0, desaktibatzeko." msgid "upward compatible machine" msgstr "gorantz bateragarria den makina" msgid "Condition" msgstr "Baldintza" msgid "A Boolean expression using the configuration values of an active printer profile. If this expression evaluates to true, this profile is considered compatible with the active printer profile." msgstr "Inprimagailu-profil aktiboaren konfigurazio-balioak erabiltzen dituen adierazpen boolearra. Adierazpena egia bada, profil hau bateragarritzat joko da inprimagailu-profil aktiboarekin." msgid "A Boolean expression using the configuration values of an active print profile. If this expression evaluates to true, this profile is considered compatible with the active print profile." msgstr "Inprimatze-profil aktiboaren konfigurazio-balioak erabiltzen dituen adierazpen boolearra. Adierazpena egia bada, profil hau bateragarritzat joko da inprimatze-profil aktiboarekin." msgid "This determines the print sequence, allowing you to print layer-by-layer or object-by-object." msgstr "Honek inprimatze-sekuentzia zehazten du: geruzaz geruza edo objektuz objektu." msgid "By layer" msgstr "Geruzaka" msgid "By object" msgstr "Objektuka" msgid "Intra-layer order" msgstr "Geruza barruko ordena" # AI Translated msgid "" "Order in which object instances are visited within a single layer, which controls how much travel is spent moving between them.\n" "\n" "Default: nearest-neighbor chaining, refined with 2-opt and crossing removal. A good general choice.\n" "As object list: instances are printed in the same order as the object list, without any path optimization. Use it when you need a predictable, manually controlled order.\n" "Best of all (shortest path): every strategy is evaluated and the shortest one is used. The object instance order is decided once for the whole print, while the ordering of individual islands is decided per layer, so different layers may end up using different strategies. Slightly slower to slice.\n" "Snake: serpentine row-by-row traversal, refined with 2-opt. Well suited to regular grids of many small parts.\n" "\n" "With multiple filaments or tools in the same layer, minimizing tool changes takes priority: objects are grouped by filament first and this setting only orders the instances within each filament group, so the overall sequence may not look like the shortest path across the plate." msgstr "" "Geruza bakar baten barruan objektu-instantziak zein ordenatan bisitatzen diren; horrek zehazten du zenbat desplazamendu behar den haien artean mugitzeko.\n" "\n" "Lehenetsia: auzokide hurbilenaren araberako kateaketa, 2-opt bidez eta gurutzaketak kenduz findua. Aukera orokor ona.\n" "Objektu-zerrenda bezala: instantziak objektu-zerrendaren ordena berean inprimatzen dira, ibilbidea batere optimizatu gabe. Erabili ordena aurreikusgarri eta eskuz kontrolatu bat behar duzunean.\n" "Guztien onena (ibilbide laburrena): estrategia guztiak ebaluatzen dira eta laburrena erabiltzen da. Objektu-instantzien ordena behin erabakitzen da inprimaketa osorako, eta uharte bakoitzaren ordena geruzaz geruza erabakitzen da; beraz, geruza desberdinek estrategia desberdinak erabil ditzakete. Xerratzea apur bat motelagoa da.\n" "Sigi-saga: errenkadaz errenkadako sigi-saga ibilbidea, 2-opt bidez findua. Oso egokia pieza txiki askoren sareta erregularretarako.\n" "\n" "Geruza berean filamentu edo tresna bat baino gehiago daudenean, tresna-aldaketak gutxitzeak du lehentasuna: objektuak filamentuaren arabera multzokatzen dira lehenik, eta ezarpen honek filamentu-multzo bakoitzaren barruko instantziak baino ez ditu ordenatzen; beraz, baliteke sekuentzia orokorrak plaka osoko ibilbide laburrenaren itxurarik ez izatea." msgid "As object list" msgstr "Objektu-zerrenda bezala" # AI Translated msgid "Best of all (shortest path)" msgstr "Guztien onena (ibilbide laburrena)" # AI Translated msgid "Snake" msgstr "Sigi-saga" msgid "Slow printing down for better layer cooling" msgstr "Moteldu inprimaketa geruza hobeto hozteko" msgid "Enable this option to slow printing speed down to ensure that the final layer time is not shorter than the layer time threshold in \"Max fan speed threshold\", so that the layer can be cooled for a longer time. This can improve the quality for small details." msgstr "Gaitu aukera hau inprimatze-abiadura moteltzeko eta azken geruzaren denbora \"Haizagailuaren gehieneko abiaduraren atalasea\" ezarpenean zehaztutakoa baino laburragoa ez izateko. Horrela geruza luzaroago hoztu daiteke eta xehetasun txikien kalitatea hobetu." msgid "Normal printing" msgstr "Inprimatze arrunta" msgid "This is the default acceleration for both normal printing and travel after the first layer." msgstr "Hau da lehen geruzaren ondorengo inprimatze arrunterako eta mugimenduetarako azelerazio lehenetsia." msgid "Acceleration of travel moves." msgstr "Lekualdatze-mugimenduen azelerazioa." msgid "First layer travel" msgstr "Lehen geruzako mugimendua" msgid "" "Travel acceleration of first layer.\n" "The percentage value is relative to Travel Acceleration." msgstr "" "Lehen geruzako desplazamendu-azelerazioa.\n" "Ehunekoaren balioa Desplazamendu-azelerazioarekiko erlatiboa da." msgid "mm/s² or %" msgstr "mm/s² edo %" msgid "Acceleration of bridges. If the value is expressed as a percentage (e.g. 50%), it will be calculated based on the outer wall acceleration." msgstr "Zubietako azelerazioa. Balioa ehuneko gisa adierazten bada (adib. %50), kanpoko hormaren azelerazioaren arabera kalkulatuko da." msgid "Default filament profile" msgstr "Filamentu-profil lehenetsia" msgid "Default filament profile when switching to this machine profile." msgstr "Makina-profil honetara aldatzean erabiliko den filamentu-profil lehenetsia." msgid "Default process profile" msgstr "Prozesu-profil lehenetsia" msgid "Default process profile when switching to this machine profile." msgstr "Makina-profil honetara aldatzean erabiliko den prozesu-profil lehenetsia." msgid "Activate air filtration" msgstr "Aktibatu aire-iragazketa" msgid "Activate for better air filtration. G-code command: M106 P3 S(0-255)" msgstr "Aktibatu aire-iragazketa hobetzeko. G-code komandoa: M106 P3 S(0-255)" msgid "Enable this to override the fan speed set in custom G-code during print." msgstr "Gaitu aukera hau inprimatzean G-code pertsonalizatuan ezarritako haizagailuaren abiadura gainidazteko." msgid "On completion" msgstr "Amaitzean" msgid "Enable this to override the fan speed set in custom G-code after print completion." msgstr "Gaitu aukera hau inprimatzea amaitu ondoren G-code pertsonalizatuan ezarritako haizagailuaren abiadura gainidazteko." msgid "Speed of exhaust fan during printing. This speed will override the speed in filament custom G-code." msgstr "Erauzketa-haizagailuaren abiadura inprimatzean. Abiadura honek filamentuaren G-code pertsonalizatuko abiadura gainidatziko du." msgid "Speed of exhaust fan after printing completes." msgstr "Erauzketa-haizagailuaren abiadura inprimaketa amaitu ondoren." msgid "No cooling for the first" msgstr "Hozterik ez lehenengoetan" msgid "Turn off all cooling fans for the first few layers. This can be used to improve build plate adhesion." msgstr "Itzali hozte-haizagailu guztiak lehen geruzetan. Inprimatze-plakarekiko itsaspena hobetzeko erabil daiteke." msgid "Don't support bridges" msgstr "Ez jarri euskarririk zubiei" msgid "This disables supporting bridges, which decreases the amount of support required. Bridges can usually be printed directly without support over a reasonable distance." msgstr "Honek zubiei euskarria jartzea desgaitzen du eta behar den euskarri-kantitatea murrizten du. Zubiak normalean zuzenean inprima daitezke euskarri gabe zentzuzko distantzia batean." msgid "Thick external bridges" msgstr "Kanpoko zubi lodiak" msgid "" "If enabled, bridge extrusion uses a line height equal to the nozzle diameter.\n" "This increases bridge strength and reliability, allowing longer spans, but may worsen appearance.\n" "If disabled, bridges may look better but are generally reliable only for shorter spans." msgstr "" "Gaituta badago, zubien estrusioak pitaren diametroaren berdina den lerro-altuera erabiltzen du.\n" "Horrek zubien sendotasuna eta fidagarritasuna handitzen ditu eta tarte luzeagoak ahalbidetzen ditu, baina itxura okertu dezake.\n" "Desgaituta badago, zubiek itxura hobea izan dezakete, baina normalean tarte laburretan soilik dira fidagarriak." msgid "Thick internal bridges" msgstr "Barruko zubi lodiak" msgid "" "If enabled, internal bridge extrusion uses a line height equal to the nozzle diameter.\n" "This increases internal bridge strength and reliability when printed over sparse infill, but may worsen appearance.\n" "If disabled, internal bridges may look better but can be less reliable over sparse infill." msgstr "" "Gaituta badago, barruko zubiaren estrusioak pitaren diametroaren berdina den lerro-altuera erabiltzen du.\n" "Horrek barruko zubiaren sendotasuna eta fidagarritasuna handitzen ditu dentsitate baxuko betegarriaren gainean inprimatzean, baina itxura okertu dezake.\n" "Desgaituta badago, barruko zubiek itxura hobea izan dezakete, baina fidagarritasun txikiagoa izan dezakete dentsitate baxuko betegarriaren gainean." msgid "Extra bridge layers (beta)" msgstr "Zubi geruza gehigarriak (beta)" msgid "" "This option enables the generation of an extra bridge layer over internal and/or external bridges.\n" "\n" "Extra bridge layers help improve bridge appearance and reliability, as the solid infill is better supported. This is especially useful in fast printers, where the bridge and solid infill speeds vary greatly. The extra bridge layer results in reduced pillowing on top surfaces, as well as reduced separation of the external bridge layer from its surrounding perimeters.\n" "\n" "It is generally recommended to set this to at least 'External bridge only', unless specific issues with the sliced model are found.\n" "\n" "Options:\n" "1. Disabled - does not generate second bridge layers. This is the default and is set for compatibility purposes\n" "2. External bridge only - generates second bridge layers for external-facing bridges only. Please note that small bridges that are shorter or narrower than the set number of perimeters will be skipped as they would not benefit from a second bridge layer. If generated, the second bridge layer will be extruded parallel to the first bridge layer to reinforce the bridge strength\n" "3. Internal bridge only - generates second bridge layers for internal bridges over sparse infill only. Please note that the internal bridges count towards the top shell layer count of your model. The second internal bridge layer will be extruded as close to perpendicular to the first as possible. If multiple regions in the same island, with varying bridge angles are present, the last region of that island will be selected as the angle reference\n" "4. Apply to all - generates second bridge layers for both internal and external-facing bridges\n" msgstr "" "Aukera honek barruko eta/edo kanpoko zubien gainean zubi-geruza gehigarri bat sortzea gaitzen du.\n" "\n" "Zubi-geruza gehigarriek zubien itxura eta fidagarritasuna hobetzen laguntzen dute, betegarri solidoak euskarri hobea duelako. Bereziki erabilgarria da inprimagailu azkarretan, zubiaren eta betegarri solidoaren abiadurak oso desberdinak direnean.\n" "\n" "Oro har, gomendatzen da gutxienez 'Kanpoko zubia soilik' ezartzea, xerratutako modeloan arazo zehatzik aurkitzen ez bada.\n" "\n" "Aukerak:\n" "1. Desgaituta - ez du bigarren zubi-geruzarik sortzen.\n" "2. Kanpoko zubia soilik - kanpora begira dauden zubietarako soilik sortzen ditu bigarren zubi-geruzak.\n" "3. Barruko zubia soilik - dentsitate baxuko betegarriaren gaineko barruko zubietarako soilik sortzen ditu bigarren zubi-geruzak.\n" "4. Aplikatu guztiei - bigarren zubi-geruzak sortzen ditu bai barruko bai kanpoko zubietarako\n" msgid "External bridge only" msgstr "Kanpoko zubia soilik" msgid "Internal bridge only" msgstr "Barruko zubia soilik" msgid "Apply to all" msgstr "Aplikatu guztiei" msgid "Filter out small internal bridges" msgstr "Iragazi barruko zubi txikiak" msgid "" "This option can help reduce pillowing on top surfaces in heavily slanted or curved models.\n" "By default, small internal bridges are filtered out and the internal solid infill is printed directly over the sparse infill. This works well in most cases, speeding up printing without too much compromise on top surface quality.\n" "However, in heavily slanted or curved models, especially where too low a sparse infill density is used, this may result in curling of the unsupported solid infill, causing pillowing.\n" "Enabling limited filtering or no filtering will print internal bridge layer over slightly unsupported internal solid infill. The options below control the sensitivity of the filtering, i.e. they control where internal bridges are created:\n" "1. Filter - enables this option. This is the default behavior and works well in most cases\n" "2. Limited filtering - creates internal bridges on heavily slanted surfaces while avoiding unnecessary bridges. This works well for most difficult models\n" "3. No filtering - creates internal bridges on every potential internal overhang. This option is useful for heavily slanted top surface models; however, in most cases, it creates too many unnecessary bridges." msgstr "" "Aukera honek goiko gainazaletako puztea murrizten lagun dezake oso inklinatutako edo kurbatutako modeloetan.\n" "Lehenespenez, barruko zubi txikiak iragazi egiten dira eta barruko betegarri solidoa zuzenean inprimatzen da dentsitate baxuko betegarriaren gainean. Horrek ondo funtzionatzen du kasu gehienetan eta inprimaketa bizkortzen du, goiko gainazalaren kalitateari gehiegi eragin gabe.\n" "Hala ere, oso inklinatutako edo kurbatutako modeloetan, bereziki dentsitate baxuko betegarria txikiegia denean, euskarri gabeko betegarri solidoa kizkurtu eta puztea sor dezake.\n" "Iragazketa mugatua edo iragazketarik eza gaitzean, barruko zubi-geruza inprimatuko da partzialki euskarri gabeko barruko betegarri solidoaren gainean. Aukerek iragazketaren sentikortasuna kontrolatzen dute:\n" "1. Iragazi: aukera gaitzen du. Lehenetsia da eta kasu gehienetan ondo dabil.\n" "2. Iragazketa mugatua: barruko zubiak sortzen ditu oso inklinatutako gainazaletan, beharrezkoak ez diren zubiak saihestuz.\n" "3. Iragazketarik ez: barruko irtengune posible guztietan zubiak sortzen ditu. Oso inklinatutako goiko gainazaletarako erabilgarria da, baina gehienetan beharrezkoak ez diren zubi gehiegi sortzen ditu." msgid "Limited filtering" msgstr "Iragazketa mugatua" msgid "No filtering" msgstr "Iragazketarik ez" msgid "Max bridge length" msgstr "Zubien geh. luzera" msgid "This is the maximum length of bridges that don't need support. Set it to 0 if you want all bridges to be supported, and set it to a very large value if you don't want any bridges to be supported." msgstr "Hau da euskarririk behar ez duten zubien gehieneko luzera. Ezarri 0 zubi guztiek euskarria izatea nahi baduzu, edo oso balio handia zubirik ez laguntzeko." msgid "End G-code" msgstr "End G-code" msgid "Add end G-Code when finishing the entire print." msgstr "Gehitu amaierako G-codea inprimaketa osoa amaitzean." msgid "Between Object G-code" msgstr "Between Object G-code" msgid "Insert G-code between objects. This parameter will only come into effect when you print your models object by object." msgstr "Txertatu G-kodea objektuen artean. Parametro honek eragina izango du soilik zure modeloak objektuz objektu inprimatzen dituzunean." msgid "Add end G-code when finishing the printing of this filament." msgstr "Gehitu amaierako G-codea filamentua inprimatzen amaitzean." msgid "Ensure vertical shell thickness" msgstr "Ensure vertical shell thickness" msgid "" "Add solid infill near sloping surfaces to guarantee the vertical shell thickness (top+bottom solid layers)\n" "None: No solid infill will be added anywhere. Caution: Use this option carefully if your model has sloped surfaces\n" "Critical Only: Avoid adding solid infill for walls\n" "Moderate: Add solid infill for heavily sloping surfaces only\n" "All: Add solid infill for all suitable sloping surfaces\n" "Default value is All." msgstr "" "Gehitu betegarri solidoa inklinatuta dauden gainazaletatik gertu, oskolaren lodiera bertikala bermatzeko (goiko + beheko geruza solidoak)\n" "Bat ere ez: ez da betegarri solidorik inon gehituko. Kontuz: erabili aukera hau arretaz zure modeloak inklinatuta dauden gainazalak baditu\n" "Kritikoak bakarrik: Saihestu hormetan betegarri solidoa gehitzea\n" "Moderatua: Gehitu betegarri solidoa inklinazio handiko gainazaletarako soilik\n" "Guztiak: Gehitu betegarri solidoa inklinatuta dauden gainazal egoki guztietarako\n" "Lehenetsitako balioa Guztiak da." msgid "Critical Only" msgstr "Critical Only" msgid "Moderate" msgstr "Moderatua" # AI Translated msgid "Top surface pattern" msgstr "Goiko gainazalaren patroia" # AI Translated msgid "This is the line pattern for top surface infill." msgstr "Hau da goiko gainazaleko betegarriaren lerro-patroia." msgid "Monotonic" msgstr "Monotonikoa" msgid "Monotonic line" msgstr "Lerro monotonikoa" msgid "Rectilinear" msgstr "Rectilinear" msgid "Aligned Rectilinear" msgstr "Lerrozuzen lerrokatua" msgid "Concentric" msgstr "Concentric" msgid "Hilbert Curve" msgstr "Hilbert kurba" msgid "Archimedean Chords" msgstr "Arkimedesen kordak" msgid "Octagram Spiral" msgstr "Oktagrama-kiribila" msgid "Top surface density" msgstr "Goiko gainazalaren dentsitatea" # AI Translated msgid "Density of top surface layer. A value of 100% creates a fully solid, smooth top layer. Reducing this value results in a textured top surface, according to the chosen top surface pattern. A value of 0% will result in only the walls on the top layer being created. Intended for aesthetic or functional purposes, not to fix issues such as over-extrusion." msgstr "Goiko gainazal-geruzaren dentsitatea. %100eko balioak goiko geruza guztiz trinko eta leuna sortzen du. Balioa murrizteak testuradun goiko gainazala sortzen du, hautatutako goiko gainazal-patroiaren arabera. %0ko balioarekin goiko geruzako hormak soilik sortuko dira. Helburu estetiko edo funtzionaletarako da, ez gainestrusioa bezalako arazoak konpontzeko." msgid "Top surface expansion" msgstr "Goiko gainazalaren hedapena" msgid "" "Expands the top surfaces by this distance to connect distinct top surfaces and fill gaps.\n" "Useful for cases where the top surface is interrupted by a raised feature, such as text on a plane. Expanding it removes the holes beneath these features and creates a continuous path with a better finish for printing on top. The expansion is applied to the original top surface, before any other processing such as bridging or overhang detection." msgstr "" "Goiko gainazalak distantzia honetan hedatzen ditu, bereizitako goiko gainazalak lotzeko eta hutsuneak betetzeko.\n" "Baliagarria da goratutako ezaugarri batek, adibidez plano bateko testuak, goiko gainazala eteten duen kasuetan. Hedatzeak ezaugarri horien azpiko zuloak kentzen ditu eta gainean inprimatzeko akabera hobea duen ibilbide jarraitua sortzen du. Hedapena jatorrizko goiko gainazalari aplikatzen zaio, zubigintza edo irtenguneen detekzioa bezalako beste edozein prozesamenduren aurretik." msgid "Top expansion wall margin" msgstr "Goiko hedapenaren horma-marjina" msgid "" "Using “Top surface expansion” may cause a surface that did not previously touch the model's outer walls to now do so.\n" "This can cause contraction marks (such as the hull line) on the outer walls.\n" "By adding a small margin, this contraction will not occur directly on the walls, thereby preventing a visible mark." msgstr "" "\"Goiko gainazalaren hedapena\" erabiltzeak lehenago modeloaren kanpoko hormak ukitzen ez zituen gainazal batek orain ukitzea eragin dezake.\n" "Horrek uzkurdura-markak sor ditzake kanpoko hormetan (adibidez, krosko-lerroa).\n" "Marjina txiki bat gehituta, uzkurdura ez da zuzenean hormetan gertatuko eta, horrela, marka ikusgarria saihestuko da." msgid "Top expansion direction" msgstr "Goiko hedapenaren norabidea" # AI Translated msgid "" "Direction in which the top surface expansion grows.\n" " - Inward grows into the holes and gaps left by features rising from the middle of a top surface.\n" " - Outward grows the outer edge of the surface, connecting surfaces separated by features that can divide a surface, such as a lattice pattern.\n" " - Inward and Outward does both." msgstr "" "Goiko gainazalaren hedapena hazten den norabidea.\n" " - Barrurantz: goiko gainazal baten erditik goratzen diren ezaugarriek utzitako zulo eta hutsuneetara hazten da.\n" " - Kanporantz: gainazalaren kanpoko ertza hazten du, gainazala zatitu dezaketen ezaugarriek —adibidez sareta-patroi batek— bereizitako gainazalak lotuz.\n" " - Barrurantz eta kanporantz: biak egiten ditu." msgid "Inward and Outward" msgstr "Barrurantz eta kanporantz" msgid "Inward" msgstr "Barrurantz" msgid "Outward" msgstr "Kanporantz" # AI Translated msgid "Bottom surface pattern" msgstr "Beheko gainazalaren patroia" # AI Translated msgid "This is the line pattern of bottom surface infill, not including bridge infill." msgstr "Hau da beheko gainazaleko betegarriaren lerro-patroia, zubi-betegarria kanpo." msgid "Bottom surface density" msgstr "Beheko gainazalaren dentsitatea" msgid "" "Density of the bottom surface layer. Intended for aesthetic or functional purposes, not to fix issues such as over-extrusion.\n" "WARNING: Lowering this value may negatively affect bed adhesion." msgstr "" "Beheko gainazal-geruzaren dentsitatea. Helburu estetiko edo funtzionaletarako da, ez gainestrusioa bezalako arazoak konpontzeko.\n" "ABISUA: balio hau jaisteak ohearekiko itsaspena okertu dezake." msgid "Top surface fill order" msgstr "Goiko gainazala betetzeko ordena" # AI Translated msgid "" "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" "Gaineko gainazalak betetzen diren noranzkoa zentroan oinarritutako patroia erabiltzen denean (Konzentrikoa, Arkimedeen Akordeak, Oktograma Espirala).\n" "Kanporanzkoa erdialdean hasten da, beraz, gehiegizko materiala gutxien ikusten den ertzera bultzatzen da. Barruranzkoa ertzean hasten da eta erdian kurba estuekin amaitzen da.\n" "Lehenetsiak bide laburreneko ordena erabiltzen du, zeina norabide batean zein bestean ibil daitekeen." msgid "Bottom surface fill order" msgstr "Beheko gainazala betetzeko ordena" # AI Translated msgid "" "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" "Beheko gainazalak betetzen diren noranzkoa zentroan oinarritutako patroia erabiltzen denean (Konzentrikoa, Arkimedeen Akordeak, Oktograma Espirala).\n" "Barruranzkoa hasten da gainazal bakoitza kanpoko kurba zabalagoekin, eta horrek lehen geruzaren atxikimendua hobetzen du erdiko kurba estuak itsatsi ez daitezkeen inprimatze-plaketan. Kanporanzkoa erdialdean hasten da, gehiegizko materiala ertzera bultzatuz.\n" "Lehenetsiak bide laburreneko ordena erabiltzen du, zeina norabide batean zein bestean ibil daitekeen." # AI Translated msgid "Internal solid infill pattern" msgstr "Barruko betegarri solidoaren patroia" # AI Translated msgid "Line pattern of internal solid infill. if the detect narrow internal solid infill be enabled, the concentric pattern will be used for the small area." msgstr "Barruko betegarri solidoaren lerro-patroia. Barruko betegarri solido estua detektatzea gaituta badago, eremu txikietan patroi kontzentrikoa erabiliko da." msgid "Line width of outer wall. If expressed as a %, it will be computed over the nozzle diameter." msgstr "Kanpoko hormaren lerro-zabalera. % gisa adierazten bada, pitaren diametroaren arabera kalkulatuko da." msgid "This is the printing speed for the outer walls of parts. These are generally printed slower than inner walls for higher quality." msgstr "Hau piezen kanpoko hormetarako inprimatze-abiadura da. Oro har, barruko hormak baino motelago inprimatzen dira kalitate handiagoa lortzeko." msgid "Small perimeters" msgstr "Perimetro txikiak" msgid "This separate setting will affect the speed of perimeters having radius <= small_perimeter_threshold (usually holes). If expressed as percentage (for example: 80%) it will be calculated on the outer wall speed setting above. Set to zero for auto." msgstr "Ezarpen bereizi honek erradioa <= small_perimeter_threshold duten perimetroen abiaduran eragiten du (normalean zuloak). Ehuneko gisa adierazten bada (adibidez: 80%), goiko kanpoko hormaren abiaduraren arabera kalkulatuko da. Jarri zero automatikoa izateko." msgid "Small perimeters threshold" msgstr "Perimetro txikien atalasea" msgid "This sets the threshold for small perimeter length. Default threshold is 0mm." msgstr "Perimetro txikien luzeraren atalasea ezartzen du. Atalase lehenetsia 0 mm da." msgid "Small support perimeters" msgstr "Euskarri-perimetro txikiak" msgid "Same as \"Small perimeters\", but for supports. This separate setting will affect the speed of support for areas <= `small_support_perimeter_threshold`. If expressed as a percentage (for example: 80%), it will be calculated on the support or support interface speed setting above. Set to zero for auto." msgstr "\"Perimetro txikiak\" ezarpenaren berdina, baina euskarrietarako. Ezarpen honek `small_support_perimeter_threshold` baino txikiagoak edo berdinak diren eremuen euskarri-abiadurari eragingo dio. Ehuneko gisa adierazten bada (adibidez, %80), goiko euskarri- edo euskarri-interfaze abiaduraren arabera kalkulatuko da. Ezarri zero automatikorako." msgid "Small support perimeters threshold" msgstr "Euskarri-perimetro txikien atalasea" msgid "This sets the threshold for small support perimeter length. The default threshold is 0mm." msgstr "Honek euskarri-perimetro txikien luzera-atalasea ezartzen du. Lehenetsitako atalasea 0 mm da." msgid "Walls printing order" msgstr "Hormen inprimatze-ordena" msgid "" "Print sequence of the internal (inner) and external (outer) walls.\n" "\n" "Use Inner/Outer for best overhangs. This is because the overhanging walls can adhere to a neighbouring perimeter while printing. However, this option results in slightly reduced surface quality as the external perimeter is deformed by being squashed to the internal perimeter.\n" "\n" "Use Inner/Outer/Inner for the best external surface finish and dimensional accuracy as the external wall is printed undisturbed from an internal perimeter. However, overhang performance will reduce as there is no internal perimeter to print the external wall against. This option requires a minimum of 3 walls to be effective as it prints the internal walls from the 3rd perimeter onwards first, then the external perimeter and, finally, the first internal perimeter. This option is recommended against the Outer/Inner option in most cases.\n" "\n" "Use Outer/Inner for the same external wall quality and dimensional accuracy benefits of Inner/Outer/Inner option. However, the Z seams will appear less consistent as the first extrusion of a new layer starts on a visible surface." msgstr "" "Barruko eta kanpoko hormen inprimatze-sekuentzia.\n" "\n" "Erabili Barru/Kanpo irtengune onenak lortzeko. Irtenguneetan dauden hormak ondoko perimetro bati atxiki daitezke inprimatzean. Hala ere, gainazalaren kalitatea apur bat murriztu daiteke, kanpoko perimetroa barrukoaren kontra zanpatzen delako.\n" "\n" "Erabili Barru/Kanpo/Barru kanpoko gainazalaren akabera eta neurri-zehaztasun onenak lortzeko, kanpoko horma barruko perimetro batek oztopatu gabe inprimatzen baita. Irtenguneen portaera, ordea, okerragoa izango da. Gutxienez 3 horma behar dira: lehenik hirugarrenetik aurrerako barruko hormak, gero kanpokoa eta azkenik lehenengo barrukoa. Kasu gehienetan Kanpo/Barru baino gomendagarriagoa da.\n" "\n" "Erabili Kanpo/Barru Barru/Kanpo/Barru aukeraren kanpoko hormaren kalitate eta neurri-zehaztasun bera lortzeko. Hala ere, Z josturak ez dira hain koherenteak izango, geruza berriaren lehen estrusioa gainazal ikusgai batean hasten delako." msgid "Inner/Outer" msgstr "Barrukoa/Kanpokoa" msgid "Outer/Inner" msgstr "Kanpokoa/Barrukoa" msgid "Inner/Outer/Inner" msgstr "Barrukoa/Kanpokoa/Barrukoa" msgid "Print infill first" msgstr "Inprimatu betegarria lehenik" msgid "" "Order of wall/infill. When the tickbox is unchecked the walls are printed first, which works best in most cases.\n" "\n" "Printing infill first may help with extreme overhangs as the walls have the neighbouring infill to adhere to. However, the infill will slightly push out the printed walls where it is attached to them, resulting in a worse external surface finish. It can also cause the infill to shine through the external surfaces of the part." msgstr "" "Hormen/betegarriaren ordena. Kontrol-laukia markatu gabe dagoenean hormak lehenik inprimatzen dira, eta horrek ondo funtzionatzen du kasu gehienetan.\n" "\n" "Betegarria lehenik inprimatzeak irtengune muturretan lagun dezake, hormek ondoko betegarriari itsatsi ahal diotelako. Hala ere, betegarriak pixka bat kanporantz bultzatuko ditu inprimatutako hormak, eta kanpoko gainazalaren akabera okerragoa izan daiteke." msgid "Wall loop direction" msgstr "Horma-begizten norabidea" msgid "" "The direction which the contour wall loops are extruded when looking down from the top.\n" "Holes are printed in the opposite direction to the contour to maintain alignment with layers whose contour polygons are incomplete and change direction, also partially forming the contour of a hole.\n" "\n" "This option will be disabled if spiral vase mode is enabled." msgstr "" "Goitik begiratuta, ingeradako-hormen begiztak zein noranzkotan estruitzen diren.\n" "\n" "Zuloak sestraren kontrako noranzkoan inprimatzen dira, sestra-poligono osatugabeak dituzten eta noranzkoa aldatzen duten geruzekin lerrokadura mantentzeko; horiek zulo baten sestra ere partzialki osatzen dute.\n" "\n" "Aukera hau desgaitu egingo da espiral formako loreontziaren modua gaituta badago." msgid "Counter clockwise" msgstr "Erlojuaren kontrako noranzkoa" msgid "Clockwise" msgstr "Erlojuaren noranzkoa" msgid "Height to rod" msgstr "Hagaxkarainoko altuera" msgid "Distance from the nozzle tip to the lower rod. Used for collision avoidance in by-object printing." msgstr "Pitaren puntatik beheko hagaxkara dagoen distantzia. Objektuz objektu inprimatzean talkak saihesteko erabiltzen da." msgid "Height to lid" msgstr "Estalkirainoko altuera" msgid "Distance from the nozzle tip to the lid. Used for collision avoidance in by-object printing." msgstr "Pitaren puntatik estalkira dagoen distantzia. Objektuz objektu inprimatzean talkak saihesteko erabiltzen da." msgid "Clearance radius around extruder: used for collision avoidance in by-object printing." msgstr "Estrusorearen inguruko segurtasun-erradioa: objektuz objektu inprimatzean talkak saihesteko erabiltzen da." msgid "Nozzle height" msgstr "Pitaren altuera" msgid "The height of nozzle tip." msgstr "Pitaren puntaren altuera." msgid "Bed mesh min" msgstr "Ohe-sarearen min." msgid "This option sets the min point for the allowed bed mesh area. Due to the probe's XY offset, most printers are unable to probe the entire bed. To ensure the probe point does not go outside the bed area, the minimum and maximum points of the bed mesh should be set appropriately. OrcaSlicer ensures that adaptive_bed_mesh_min/adaptive_bed_mesh_max values do not exceed these min/max points. This information can usually be obtained from your printer manufacturer. The default setting is (-99999, -99999), which means there are no limits, thus allowing probing across the entire bed." msgstr "Aukera honek baimendutako ohe-sarearen eremuaren gutxieneko puntua ezartzen du. Zundaren XY desplazamendua dela eta, inprimagailu gehienek ezin dute ohe osoa zundatu. Zunda-puntua ohe-eremutik kanpora ez ateratzeko, ohe-sarearen gutxieneko eta gehieneko puntuak egoki ezarri behar dira. OrcaSlicerrek adaptive_bed_mesh_min/adaptive_bed_mesh_max balioek gutxieneko/gehieneko puntu horiek ez gainditzea bermatzen du. Informazio hori normalean inprimagailuaren fabrikatzailearengandik lor daiteke. Ezarpen lehenetsia (-99999, -99999) da; horrek esan nahi du ez dagoela mugarik." msgid "Bed mesh max" msgstr "Ohe-sarearen max." msgid "This option sets the max point for the allowed bed mesh area. Due to the probe's XY offset, most printers are unable to probe the entire bed. To ensure the probe point does not go outside the bed area, the minimum and maximum points of the bed mesh should be set appropriately. OrcaSlicer ensures that adaptive_bed_mesh_min/adaptive_bed_mesh_max values do not exceed these min/max points. This information can usually be obtained from your printer manufacturer. The default setting is (99999, 99999), which means there are no limits, thus allowing probing across the entire bed." msgstr "Aukera honek baimendutako ohe-sarearen eremuaren gehieneko puntua ezartzen du. Zundaren XY desplazamendua dela eta, inprimagailu gehienek ezin dute ohe osoa zundatu. Zunda-puntua ohe-eremutik kanpora ez ateratzeko, ohe-sarearen gutxieneko eta gehieneko puntuak egoki ezarri behar dira. OrcaSlicerrek adaptive_bed_mesh_min/adaptive_bed_mesh_max balioek gutxieneko/gehieneko puntu horiek ez gainditzea bermatzen du. Informazio hori normalean inprimagailuaren fabrikatzailearengandik lor daiteke. Ezarpen lehenetsia (99999, 99999) da; horrek esan nahi du ez dagoela mugarik." msgid "Probe point distance" msgstr "Zunda-puntuen distantzia" msgid "This option sets the preferred distance between probe points (grid size) for the X and Y directions, with the default being 50mm for both X and Y." msgstr "Aukera honek X eta Y norabideetako zunda-puntuen arteko distantzia hobetsia ezartzen du (sare-tamaina); lehenetsia 50 mm da X zein Y-rako." msgid "Mesh margin" msgstr "Sarearen marjina" msgid "This option determines the additional distance by which the adaptive bed mesh area should be expanded in the XY directions." msgstr "Aukera honek ohe-sare egokigarriaren eremua XY norabideetan zenbat zabaldu behar den zehazten du." msgid "Grab length" msgstr "Heldura-luzera" msgid "Extruder Color" msgstr "Estrusorearen kolorea" msgid "Only used as a visual help on UI." msgstr "Interfazeko ikusizko laguntza gisa soilik erabiltzen da." msgid "Extruder offset" msgstr "Estrusorearen desplazamendua" msgid "The material may have volumetric change after switching between molten and crystalline states. This setting changes all extrusion flow of this filament in G-code proportionally. The recommended value range is between 0.95 and 1.05. You may be able to tune this value to get a nice flat surface if there is slight overflow or underflow." msgstr "Materialak bolumen-aldaketa izan dezake egoera urtuaren eta kristalinoaren artean aldatzean. Ezarpen honek filamentu honen estrusio-fluxu guztia proportzionalki aldatzen du G-codean. Gomendatutako balio-tartea 0.95 eta 1.05 artean dago. Balio hau doitu ahal izango duzu gainazal lau polita lortzeko, gainezkatze edo azpiestrusio arina badago." msgid "" "The material may have volumetric change after switching between molten and crystalline states. This setting changes all extrusion flow of this filament in G-code proportionally. The recommended value range is between 0.95 and 1.05. You may be able to tune this value to get a nice flat surface if there is slight overflow or underflow.\n" "\n" "The final object flow ratio is this value multiplied by the filament flow ratio." msgstr "" "Materialak bolumen-aldaketa izan dezake egoera urtuaren eta kristalinoaren artean aldatzean. Ezarpen honek filamentu honen estrusio-fluxu guztia proportzionalki aldatzen du G-codean. Gomendatutako balio-tartea 0.95 eta 1.05 artean dago. Balio hau doitu ahal izango duzu gainazal lau polita lortzeko, gainezkatze edo azpiestrusio arina badago.\n" "\n" "Azken objektuaren fluxu-erlazioa balio hau filamentuaren fluxu-erlazioarekin biderkatuta da." msgid "Enable pressure advance" msgstr "Gaitu presio-aurrerapena" msgid "Enable pressure advance, auto calibration result will be overwritten once enabled." msgstr "Gaitu presio-aurrerapena; gaitzean, kalibrazio automatikoaren emaitza gainidatziko da." msgid "Pressure advance (Klipper) AKA Linear advance factor (Marlin)." msgstr "Presio-aurrerapena (Klipper), edo aurrerapen linealaren faktorea (Marlin)." msgid "Enable adaptive pressure advance (beta)" msgstr "Gaitu presio-aurrerapen egokigarria (beta)" #, no-c-format, no-boost-format msgid "" "With increasing print speeds (and hence increasing volumetric flow through the nozzle) and increasing accelerations, it has been observed that the effective PA value typically decreases. This means that a single PA value is not always 100% optimal for all features and a compromise value is usually used that does not cause too much bulging on features with lower flow speed and accelerations while also not causing gaps on faster features.\n" "\n" "This feature aims to address this limitation by modeling the response of your printer's extrusion system depending on the volumetric flow speed and acceleration it is printing at. Internally, it generates a fitted model that can extrapolate the needed pressure advance for any given volumetric flow speed and acceleration, which is then emitted to the printer depending on the current print conditions.\n" "\n" "When enabled, the pressure advance value above is overridden. However, a reasonable default value above is strongly recommended to act as a fallback and for when tool changing.\n" "\n" msgstr "" "Inprimatze-abiadurak eta azelerazioak handitzean, PA balio eraginkorra normalean jaisten dela ikusi da. Horrek esan nahi du PA balio bakarra ez dela beti %100 optimoa ezaugarri guztietarako, eta normalean konpromiso-balio bat erabiltzen dela.\n" "\n" "Ezaugarri honek muga hori konpontzea du helburu, inprimagailuaren estrusio-sistemaren erantzuna modelizatuz unean erabiltzen ari den fluxu bolumetrikoaren abiaduraren eta azelerazioaren arabera. Barruan modelo egokitu bat sortzen du, behar den pressure advance balioa estrapolatzeko.\n" "\n" "Gaituta dagoenean, goiko pressure advance balioa gainidazten da. Hala ere, goian arrazoizko balio lehenetsi bat ezartzea biziki gomendatzen da ordezko gisa eta tresna-aldaketetarako.\n" "\n" msgid "Adaptive pressure advance measurements (beta)" msgstr "Pressure advance neurketa egokigarriak (beta)" # AI Translated #, no-c-format, no-boost-format msgid "" "Add sets of pressure advance (PA) values, the volumetric flow speeds and accelerations they were measured at, separated by a comma. One set of values per line. For example\n" "0.04,3.96,3000\n" "0.033,3.96,10000\n" "0.029,7.91,3000\n" "0.026,7.91,10000\n" "\n" "How to calibrate:\n" "1. Run the pressure advance test for at least 3 speeds per acceleration value. It is recommended that the test is run for at least the speed of the external perimeters, the speed of the internal perimeters and the fastest feature print speed in your profile (usually its the sparse or solid infill). Then run them for the same speeds for the slowest and fastest print accelerations, and no faster than the recommended maximum acceleration as given by the Klipper input shaper\n" "2. Take note of the optimal PA value for each volumetric flow speed and acceleration. You can find the flow number by selecting flow from the color scheme drop down and move the horizontal slider over the PA pattern lines. The number should be visible at the bottom of the page. The ideal PA value should be decreasing the higher the volumetric flow is. If it is not, confirm that your extruder is functioning correctly. The slower and with less acceleration you print, the larger the range of acceptable PA values. If no difference is visible, use the PA value from the faster test\n" "3. Enter the triplets of PA values, Flow and Accelerations in the text box here and save your filament profile." msgstr "" "Gehitu Pressure Advance (PA) balio-multzoak, neurtu ziren fluxu bolumetrikoen abiadurak eta azelerazioak, komaz bereizita. Lerro bakoitzean balio-multzo bat. Adibidez:\n" "0.04,3.96,3000\n" "0.033,3.96,10000\n" "0.029,7.91,3000\n" "0.026,7.91,10000\n" "\n" "Kalibratzeko:\n" "1. Exekutatu Pressure Advance proba gutxienez 3 abiaduratan azelerazio-balio bakoitzeko. Gomendagarria da kanpoko perimetroen abiaduran, barruko perimetroen abiaduran eta profileko ezaugarri azkarrenaren abiaduran egitea. Ondoren, errepikatu azelerazio motel eta azkarrenekin, Klipper-en input shaper-ak gomendatutako gehienekoa gainditu gabe.\n" "2. Idatzi fluxu bolumetriko eta azelerazio bakoitzerako PA balio optimoa. Fluxua kolore-eskeman hautatu eta irristagailua PA patroien gainetik mugituta ikus dezakezu. PA idealak txikiagoa izan behar du fluxua handitu ahala. Hala ez bada, egiaztatu estrusoreak zuzen funtzionatzen duela.\n" "3. Sartu PA, fluxu eta azelerazio hirukoteak testu-koadroan eta gorde filamentuen profila." msgid "Enable adaptive pressure advance within features (beta)" msgstr "Gaitu ezaugarri barruko Pressure Advance egokigarria (beta)" msgid "" "Enable adaptive PA whenever there are flow changes in a feature, such as line width changes in a corner or overhangs.\n" "\n" "Not compatible with Prusa printers as they pause to process PA changes, which causes delays and defects.\n" "\n" "This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues." msgstr "" "Gaitu PA egokigarria ezaugarri baten barruan fluxu-aldaketak daudenean, adibidez izkina edo irtengune bateko lerro-zabalera aldatzean.\n" "\n" "Ez da bateragarria Prusa inprimagailuekin, PA aldaketak prozesatzeko gelditzen baitira eta horrek atzerapenak eta akatsak sortzen ditu.\n" "\n" "Aukera esperimentala da; PA profila zehaztasunez ezarrita ez badago, uniformetasun-arazoak eragingo ditu." msgid "Static pressure advance for bridges" msgstr "Zubietarako Pressure Advance estatikoa" msgid "" "Static pressure advance value for bridges. Set to 0 to apply the same pressure advance as \n" "equivalent walls (using adaptive settings if enabled).\n" "\n" "A lower PA value when printing bridges helps reduce the appearance of slight under-extrusion immediately after bridges. This is caused by the pressure drop in the nozzle when printing in the air and a lower PA helps counteract this." msgstr "" "Zubietarako Pressure Advance balio estatikoa. Ezarri 0 horma baliokideen Pressure Advance bera aplikatzeko (ezarpen egokigarriak erabiliz, gaituta badaude).\n" "\n" "Zubiak inprimatzean PA balio txikiagoak zubien ondorengo azpiestrusio arina murrizten laguntzen du. Airean inprimatzean pitaren presioa jaisten delako gertatzen da, eta PA txikiagoak hori konpentsatzen du." msgid "Default line width if other line widths are set to 0. If expressed as a %, it will be computed over the nozzle diameter." msgstr "Lerro-zabalera lehenetsia, beste lerro-zabalerak 0 badira. % gisa adierazten bada, pitaren diametroaren arabera kalkulatuko da." msgid "Keep fan always on" msgstr "Mantendu haizagailua beti piztuta" msgid "Enabling this setting means that part cooling fan will never stop entirely and will instead run at least at minimum speed to reduce the frequency of starting and stopping." msgstr "Ezarpen hau gaitzean, piezaren hozte-haizagailua ez da inoiz erabat geldituko; gutxieneko abiaduran ariko da abiarazte eta gelditze kopurua murrizteko." msgid "Don't slow down outer walls" msgstr "Ez moteldu kanpoko hormak" msgid "" "If enabled, this setting will ensure external perimeters are not slowed down to meet the minimum layer time. This is particularly helpful in the below scenarios:\n" "1. To avoid changes in shine when printing glossy filaments\n" "2. To avoid changes in external wall speed which may create slight wall artifacts that appear like Z banding\n" "3. To avoid printing at speeds which cause VFAs (fine artifacts) on the external walls" msgstr "Gaituta badago, ezarpen honek kanpoko perimetroak gutxieneko geruza-denbora betetzeko ez moteltzea bermatuko du. Bereziki lagungarria da filamentuen distira-aldaketak, horma-artefaktu arinak eta kanpoko hormetako VFAak saihesteko" msgid "Layer time" msgstr "Geruza-denbora" msgid "The part cooling fan will be enabled for layers where the estimated time is shorter than this value. Fan speed is interpolated between the minimum and maximum fan speeds according to layer printing time." msgstr "Piezaren hozte-haizagailua gaituko da estimatutako denbora balio hau baino laburragoa duten geruzetan. Haizagailuaren abiadura gutxienekoaren eta gehienekoaren artean interpolatuko da geruzaren inprimatze-denboraren arabera." msgid "s" msgstr "s" msgid "Default color" msgstr "Kolore lehenetsia" msgid "" "Default filament color.\n" "Right click to reset value to system default." msgstr "" "Filamentuaren kolore lehenetsia.\n" "Egin eskuineko klik balioa sistemaren lehenetsira berrezartzeko." msgid "Filament notes" msgstr "Filamentu-oharrak" msgid "You can put your notes regarding the filament here." msgstr "Hemen filamentuari buruzko oharrak jar ditzakezu." msgid "Required nozzle HRC" msgstr "Pitaren beharrezko HRCa" msgid "Minimum HRC of nozzle required to print the filament. A value of 0 means no checking of the nozzle's HRC." msgstr "Filamentua inprimatzeko behar den pitaren gutxieneko HRCa. 0 balioak xerratzean pitaren HRCa ez egiaztatzea esan nahi du." msgid "Filament map to extruder" msgstr "Estrusorearentzako filamentu-mapa" msgid "Filament map to extruder." msgstr "Estrusorearentzako filamentu-mapa." msgid "Auto For Flush" msgstr "Purgatzerako automatikoa" msgid "Auto For Match" msgstr "Automatikoki parekatzeko" msgid "Nozzle Manual" msgstr "Pita eskuz" msgid "Flush temperature" msgstr "Purgatze-tenperatura" msgid "Temperature when flushing filament. 0 indicates the upper bound of the recommended nozzle temperature range." msgstr "Filamentua purgatzean erabiltzen den tenperatura. 0 balioak gomendatutako pitaren tenperatura-barrutiaren goiko muga adierazten du." msgid "Flush temperature used in fast purge mode." msgstr "Purgatze azkarreko moduan erabiltzen den purgatze-tenperatura." msgid "Flush volumetric speed" msgstr "Purgatzearen abiadura bolumetrikoa" msgid "Volumetric speed when flushing filament. 0 indicates the max volumetric speed." msgstr "Filamentua purgatzean erabiltzen den abiadura bolumetrikoa. 0 balioak gehieneko abiadura bolumetrikoa adierazten du." msgid "This setting is the volume of filament that can be melted and extruded per second. Printing speed is limited by max volumetric speed, in case of too high and unreasonable speed setting. This value cannot be zero." msgstr "Ezarpen hau segundoko urtu eta estruitu daitekeen filamentuen bolumena da. Inprimatze-abiadura gehieneko abiadura bolumetrikoak mugatzen du, abiadura-ezarpena handiegia edo zentzugabea bada. Balio hau ezin da zero izan." msgid "Filament load time" msgstr "Filamentua kargatzeko denbora" msgid "Time to load new filament when switch filament. It's usually applicable for single-extruder multi-material machines. For tool changers or multi-tool machines, it's typically 0. For statistics only." msgstr "Filamentua aldatzean filamentu berria kargatzeko denbora. Normalean estrusore bakarreko material anitzeko makinetan erabiltzen da. Estatistiketarako soilik." msgid "Filament unload time" msgstr "Filamentua deskargatzeko denbora" msgid "Time to unload old filament when switch filament. It's usually applicable for single-extruder multi-material machines. For tool changers or multi-tool machines, it's typically 0. For statistics only." msgstr "Filamentua aldatzean filamentu zaharra deskargatzeko denbora. Normalean estrusore bakarreko material anitzeko makinetan erabiltzen da. Estatistiketarako soilik." msgid "Tool change time" msgstr "Tresna aldatzeko denbora" msgid "Time taken to switch tools. It's usually applicable for tool changers or multi-tool machines. For single-extruder multi-material machines, it's typically 0. For statistics only." msgstr "Tresnak aldatzeko behar den denbora. Normalean tresna-aldagailuetan edo tresna anitzeko makinetan erabiltzen da. Estatistiketarako soilik." msgid "Bed temperature type" msgstr "Ohearen tenperatura mota" msgid "This option determines how the bed temperature is set during slicing: based on the temperature of the first filament or the highest temperature of the printed filaments." msgstr "Aukera honek zehazten du nola ezartzen den ohearen tenperatura xerratzean: lehen filamentuko tenperaturan edo inprimatutako filamentuen tenperaturarik altuenean oinarrituta." msgid "By First filament" msgstr "Lehen filamentuen arabera" msgid "By Highest Temp" msgstr "Tenperatura altuenaren arabera" msgid "Filament diameter is used to calculate extrusion variables in G-code, so it is important that this is accurate and precise." msgstr "Filamentuaren diametroa G-codeko estrusio-aldagaiak kalkulatzeko erabiltzen da; beraz, garrantzitsua da zehatza izatea." msgid "Pellet flow coefficient" msgstr "Pellet-fluxuaren koefizientea" msgid "" "Pellet flow coefficient is empirically derived and allows for volume calculation for pellet printers.\n" "\n" "Internally it is converted to filament_diameter. All other volume calculations remain the same.\n" "\n" "filament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )" msgstr "" "Pellet-fluxuaren koefizientea enpirikoki lortzen da, eta pellet-inprimagailuetarako bolumena kalkulatzea ahalbidetzen du.\n" "\n" "Barruan filament_diameter bihurtzen da. Gainerako bolumen-kalkuluek berdin jarraitzen dute.\n" "\n" "filament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )" msgid "Adaptive volumetric speed" msgstr "Abiadura bolumetriko egokigarria" msgid "" "When enabled, the extrusion flow is limited by the smaller of the fitted value (calculated from line width and layer height) and the user-defined maximum flow. When disabled, only the user-defined maximum flow is applied.\n" "\n" "Note: Experimental and incomplete feature imported from BBS. Functional for some profiles that already have the variable saved." msgstr "" "Gaituta dagoenean, estrusio-fluxua egokitutako balioaren (lerro-zabaleratik eta geruza-altueratik kalkulatua) eta erabiltzaileak zehaztutako gehieneko fluxuaren arteko txikienera mugatzen da. Desgaituta dagoenean, erabiltzaileak zehaztutako gehieneko fluxua bakarrik aplikatzen da.\n" "\n" "Oharra: BBS-tik inportatutako eginbide esperimentala eta osatu gabea. Funtzionala aldagai hori gordeta duten profil batzuetan." msgid "Max volumetric speed multinomial coefficients" msgstr "Gehieneko abiadura bolumetrikoaren koefiziente multinomialak" msgid "Shrinkage (XY)" msgstr "Uzkurdura (XY)" #, no-c-format, no-boost-format msgid "" "Enter the shrinkage percentage that the filament will get after cooling (94% if you measure 94mm instead of 100mm). The part will be scaled in XY to compensate. For multi-material prints, ensure filament shrinkage matches across all used filaments\n" "Be sure to allow enough space between objects, as this compensation is done after the checks." msgstr "" "Sartu hoztu ondoren filamentuak izango duen uzkurdura-ehunekoa (adibidez, 100 mm-ren ordez 94 mm neurtzen badituzu, %94). Pieza XYn eskalatuko da konpentsatzeko. Material anitzeko inprimaketetan, ziurtatu erabilitako filamentuen uzkurdurak bat datozela.\n" "Utzi objektuen artean nahikoa tarte, konpentsazioa egiaztapenen ondoren egiten baita." msgid "Shrinkage (Z)" msgstr "Uzkurdura (Z)" #, no-c-format, no-boost-format msgid "Enter the shrinkage percentage that the filament will get after cooling (94% if you measure 94mm instead of 100mm). The part will be scaled in Z to compensate." msgstr "Sartu filamentuak hoztu ondoren izango duen uzkurdura-portzentajea (%94, 100 mm-ren ordez 94 mm neurtzen badituzu). Pieza Z ardatzean eskalatuko da konpentsatzeko." msgid "Adhesiveness Category" msgstr "Itsasgarritasun-kategoria" msgid "Filament category." msgstr "Filamentuen kategoria." msgid "Loading speed" msgstr "Kargatze-abiadura" msgid "Speed used for loading the filament on the wipe tower." msgstr "Filamentua purgatze-dorrean kargatzeko erabilitako abiadura." msgid "Loading speed at the start" msgstr "Hasierako kargatze-abiadura" msgid "Speed used at the very beginning of loading phase." msgstr "Kargatze-fasearen hasieran erabilitako abiadura." msgid "Unloading speed" msgstr "Deskargatze-abiadura" msgid "Speed used for unloading the filament on the wipe tower (does not affect initial part of unloading just after ramming)." msgstr "Filamentua purgatze-dorrean deskargatzeko erabilitako abiadura (ez dio eragiten muturraren moldaketaren ondorengo deskargaren hasierako zatiari)." msgid "Unloading speed at the start" msgstr "Hasierako deskargatze-abiadura" msgid "Speed used for unloading the tip of the filament immediately after ramming." msgstr "Muturraren moldaketa egin eta berehala filamentuko punta deskargatzeko erabilitako abiadura." msgid "Delay after unloading" msgstr "Atzerapena deskargatu ondoren" msgid "Time to wait after the filament is unloaded. May help to get reliable tool changes with flexible materials that may need more time to shrink to original dimensions." msgstr "Filamentua deskargatu ondoren itxaron beharreko denbora. Material malguekin tresna-aldaketa fidagarriak lortzen lagun dezake." msgid "Number of cooling moves" msgstr "Hozte-mugimenduen kopurua" msgid "Filament is cooled by being moved back and forth in the cooling tubes. Specify desired number of these moves." msgstr "Filamentua hozte-hodietan aurrera eta atzera mugituz hozten da. Zehaztu nahi duzun mugimendu kopurua." msgid "Stamping loading speed" msgstr "Stamping kargatze-abiadura" msgid "Speed used for stamping." msgstr "Stampingerako erabilitako abiadura." msgid "Stamping distance measured from the center of the cooling tube" msgstr "Stamping distantzia, hozte-hodiaren erdigunetik neurtuta" msgid "If set to non-zero value, filament is moved toward the nozzle between the individual cooling moves (\"stamping\"). This option configures how long this movement should be before the filament is retracted again." msgstr "Zero ez den balio bat ezartzen bada, filamentua pitarantz mugituko da hozte-mugimendu bakoitzaren artean (\"stamping\"). Aukera honek mugimendu horrek zenbat iraungo duen ezartzen du filamentuak berriro atzera egin aurretik." msgid "Speed of the first cooling move" msgstr "Lehen hozte-mugimenduaren abiadura" msgid "Cooling moves are gradually accelerating beginning at this speed." msgstr "Hozte-mugimenduak pixkanaka azeleratzen dira abiadura honetatik hasita." msgid "Minimal purge on wipe tower" msgstr "Gutxieneko purga purgatze-dorrean" msgid "After a tool change, the exact position of the newly loaded filament inside the nozzle may not be known, and the filament pressure is likely not yet stable. Before purging the print head into an infill or a sacrificial object, Orca Slicer will always prime this amount of material into the wipe tower to produce successive infill or sacrificial object extrusions reliably." msgstr "Tresna-aldaketa baten ondoren, pitaren barruan kargatu berri den filamentuak duen posizio zehatza ezezaguna izan daiteke, eta filamentuko presioa ziurrenik oraindik ez da egonkorra izango. OrcaSlicerrek material kopuru hau purgatze-dorrean prestatuko du, ondorengo estrusioak fidagarri sortzeko." msgid "Wipe tower cooling" msgstr "Purgatze-dorrearen hoztea" msgid "Temperature drop before entering filament tower" msgstr "Tenperatura-jaitsiera filamentuen dorrera sartu aurretik" msgid "Interface layer pre-extrusion distance" msgstr "Interfaze-geruzaren aurre-estrusio distantzia" msgid "Pre-extrusion distance for prime tower interface layer (where different materials meet)." msgstr "Purgatze-dorreko interfaze-geruzarako aurre-estrusio distantzia (material desberdinak elkartzen diren tokian)." msgid "Interface layer pre-extrusion length" msgstr "Interfaze-geruzaren aurre-estrusio luzera" msgid "Pre-extrusion length for prime tower interface layer (where different materials meet)." msgstr "Purgatze-dorreko interfaze-geruzarako aurre-estrusio luzera (material desberdinak elkartzen diren tokian)." msgid "Tower ironing area" msgstr "Dorrea lisatzeko eremua" msgid "Ironing area for prime tower interface layer (where different materials meet)." msgstr "Purgatze-dorreko interfaze-geruzaren lisatze-eremua (material desberdinak elkartzen diren tokian)." msgid "mm²" msgstr "mm³" msgid "Interface layer purge length" msgstr "Interfaze-geruzaren purgatze-luzera" msgid "Purge length for prime tower interface layer (where different materials meet)." msgstr "Purgatze-dorreko interfaze-geruzaren purgatze-luzera (material desberdinak elkartzen diren tokian)." msgid "Interface layer print temperature" msgstr "Interfaze-geruzaren inprimatze-tenperatura" msgid "Print temperature for prime tower interface layer (where different materials meet). If set to -1, use max recommended nozzle temperature." msgstr "Purgatze-dorreko interfaze-geruzaren inprimatze-tenperatura (material desberdinak elkartzen diren tokian). -1 ezartzen bada, erabili gomendatutako gehieneko pitaren tenperatura." msgid "Speed of the last cooling move" msgstr "Azken hozte-mugimenduaren abiadura" msgid "Cooling moves are gradually accelerating towards this speed." msgstr "Hozte-mugimenduak pixkanaka azeleratzen dira abiadura honetara iritsi arte." msgid "Ramming parameters" msgstr "Muturraren moldaketaren parametroak" msgid "This string is edited by RammingDialog and contains ramming specific parameters." msgstr "Kate hau RammingDialog-ek editatzen du, eta muturraren moldaketaren (rammingaren) parametro espezifikoak ditu." msgid "Enable ramming for multi-tool setups" msgstr "Gaitu muturraren moldaketa tresna anitzeko konfigurazioetan" msgid "Perform ramming when using multi-tool printer (i.e. when the 'Single Extruder Multimaterial' in Printer Settings is unchecked). When checked, a small amount of filament is rapidly extruded on the wipe tower just before the tool change. This option is only used when the wipe tower is enabled." msgstr "Egin muturraren moldaketa tresna anitzeko inprimagailua erabiltzean. Markatuta dagoenean, filamentu-kopuru txiki bat azkar estruitzen da purgatze-dorrean tresna-aldaketaren aurretik. Aukera hau purgatze-dorrea gaituta dagoenean bakarrik erabiltzen da." msgid "Multi-tool ramming volume" msgstr "Tresna anitzeko muturraren moldaketaren bolumena" msgid "The volume to be rammed before the tool change." msgstr "Tresna aldatu aurretik muturraren moldaketan erabiliko den bolumena." msgid "Multi-tool ramming flow" msgstr "Tresna anitzeko muturraren moldaketaren fluxua" msgid "Flow used for ramming the filament before the tool change." msgstr "Tresna aldatu aurretik filamentuaren muturraren moldaketan erabilitako fluxua." msgid "Density" msgstr "Dentsitatea" msgid "Filament density, for statistical purposes only." msgstr "Filamentuaren dentsitatea, estatistiketarako soilik." msgid "g/cm³" msgstr "g/cm³" msgid "Filament material type" msgstr "Filamentuaren material mota" msgid "Soluble material" msgstr "Material disolbagarria" msgid "Soluble material is commonly used to print supports and support interfaces." msgstr "Material disolbagarria euskarriak eta euskarri-interfazeak inprimatzeko erabiltzen da normalean." msgid "Filament ramming length" msgstr "Filamentuaren muturraren moldaketaren luzera" msgid "When changing the extruder, it is recommended to extrude a certain length of filament from the original extruder. This helps minimize nozzle oozing." msgstr "Estrusorea aldatzean, jatorrizko estrusoretik filamentuzko luzera jakin bat estruitzea gomendatzen da. Horrek pitaren jarioa gutxitzen laguntzen du." msgid "Support material" msgstr "Euskarri-materiala" msgid "Support material is commonly used to print supports and support interfaces." msgstr "Euskarri-materiala euskarriak eta euskarri-interfazeak inprimatzeko erabiltzen da normalean." msgid "Filament printable" msgstr "Filamentua inprimagarria" msgid "The filament is printable in extruder." msgstr "Filamentua estrusorean inprima daiteke." msgid "Filament-extruder compatibility" msgstr "Filamentu-estrusore bateragarritasuna" msgid "A single 32-bit int encoding the compatibility level of a filament across all extruders (up to 10). Every 3 bits represent one extruder (bits [3*i, 3*i+2] for extruder i). 0: printable, 1: error, 2: critical warning, 3: warning, 4-7: reserved." msgstr "32 biteko int bakar batek filamentuak estrusore guztiekin duen bateragarritasun-maila kodetzen du (gehienez 10). 3 biteko multzo bakoitzak estrusore bat adierazten du (i estrusorearentzat [3*i, 3*i+2] bitak). 0: inprimagarria, 1: errorea, 2: abisu kritikoa, 3: abisua, 4-7: erreserbatuta." msgid "Softening temperature" msgstr "Biguntze-tenperatura" msgid "The material softens at this temperature, so when the bed temperature is equal to or greater than this, it's highly recommended to open the front door and/or remove the upper glass to avoid clogs." msgstr "Materiala tenperatura honetan biguntzen da; beraz, ohearen tenperatura berdina edo handiagoa bada, aurreko atea irekitzea eta/edo goiko beira kentzea oso gomendagarria da buxadurak saihesteko." msgid "Price" msgstr "Prezioa" msgid "Filament price, for statistical purposes only." msgstr "Filamentuaren prezioa, estatistiketarako soilik." msgid "money/kg" msgstr "dirua/kg" msgid "Vendor" msgstr "Hornitzailea" msgid "Vendor of filament. For show only." msgstr "Filamentuaren hornitzailea. Bistaratzeko soilik." msgid "(Undefined)" msgstr "(Definitu gabe)" msgid "Sparse infill direction" msgstr "Dentsitate baxuko betegarriaren norabidea" # AI Translated msgid "This is the angle for sparse infill pattern, which controls the start or main direction of lines." msgstr "Hau da dentsitate baxuko betegarriaren patroiaren angelua, lerroen hasierako edo norabide nagusia kontrolatzen duena." msgid "Solid infill direction" msgstr "Betegarri solidoaren norabidea" # AI Translated msgid "Angle for solid infill pattern, which controls the start or main direction of line." msgstr "Betegarri solidoaren patroiaren angelua; lerroaren hasierako edo norabide nagusia kontrolatzen du." msgid "Top layer direction" msgstr "Goiko geruzaren norabidea" msgid "" "Fixed angle for the top solid infill and ironing lines.\n" "Set to -1 to follow the default solid infill direction." msgstr "" "Goiko betegarri solidoaren eta lisatze-lerroen angelu finkoa.\n" "Ezarri -1 betegarri solidoaren norabide lehenetsia jarraitzeko." msgid "Bottom layer direction" msgstr "Beheko geruzaren norabidea" msgid "" "Fixed angle for the bottom solid infill lines.\n" "Set to -1 to follow the default solid infill direction." msgstr "" "Beheko betegarri solidoaren lerroen angelu finkoa.\n" "Ezarri -1 betegarri solidoaren norabide lehenetsia jarraitzeko." msgid "Sparse infill density" msgstr "Dentsitate baxuko betegarriaren dentsitatea" # AI Translated #, no-c-format, no-boost-format msgid "Density of internal sparse infill, 100% turns all sparse infill into solid infill and internal solid infill pattern will be used." msgstr "Barruko dentsitate baxuko betegarriaren dentsitatea; %100ean, dentsitate baxuko betegarri guztia betegarri solido bihurtzen da eta Barruko betegarri solidoaren patroia erabiliko da." msgid "Align directions to model" msgstr "Lerrokatu norabideak modeloarekin" msgid "" "Aligns infill, bridge, ironing, and top/bottom surface directions to follow the model's orientation on the build plate.\n" "When enabled, these directions rotate together with the model so the printed features keep their intended orientation relative to the part, preserving optimal strength and surface characteristics regardless of how the model is placed." msgstr "" "Betegarriaren, zubien, lisatzearen eta goiko/beheko gainazalen norabideak modeloak inprimatze-plakan duen orientazioari jarraitzeko lerrokatzen ditu.\n" "Gaituta dagoenean, norabide horiek modeloarekin batera biratzen dira; horrela, inprimatutako ezaugarriek piezarekiko nahi den orientazioa mantentzen dute, eta erresistentzia eta gainazal-ezaugarri egokiak gordetzen dira modeloa nola kokatzen den kontuan hartu gabe." msgid "Insert solid layers" msgstr "Txertatu geruza solidoak" msgid "Insert solid infill at specific layers. Use N to insert every Nth layer, N#K to insert K consecutive solid layers every N layers (K is optional, e.g. '5#' equals '5#1'), or a comma-separated list (e.g. 1,7,9) to insert at explicit layers. Layers are 1-based." msgstr "Txertatu betegarri solidoa geruza jakinetan. Erabili N N. geruza bakoitzean txertatzeko, N#K N geruzatik behin K geruza solido jarraian txertatzeko (K aukerakoa da; adibidez, '5#' eta '5#1' baliokideak dira), edo komaz bereizitako zerrenda bat (adibidez, 1,7,9) geruza zehatzetan txertatzeko. Geruzen zenbaketa 1etik hasten da." msgid "Fill Multiline" msgstr "Lerro anitzeko betegarria" # AI Translated msgid "Using multiple lines for the infill pattern, if supported by infill pattern." msgstr "Erabili hainbat lerro betegarri-patroirako, betegarri-patroiak onartzen badu." msgid "Z-buckling bias optimization (experimental)" msgstr "Z ardatzeko okerdura-biasaren optimizazioa (esperimentala)" # AI Translated #, no-c-format, no-boost-format msgid "Tightens the gyroid wave along the Z (vertical) axis at low infill density to shorten the effective vertical column length and improve Z-axis compression buckling resistance. Filament use is preserved. No effect at ~30% sparse infill density and above. Only applies when Sparse infill pattern is set to Gyroid." msgstr "Betegarri-dentsitate baxuan giroidearen uhina Z ardatzean (bertikalean) estutzen du, zutabe bertikalaren luzera eraginkorra laburtzeko eta Z ardatzeko konpresio-okerdurarekiko erresistentzia hobetzeko. Filamentuaren erabilera mantentzen da. Ez du eraginik dentsitate baxuko betegarriaren dentsitatea gutxi gorabehera %30ekoa edo handiagoa denean. Dentsitate baxuko betegarriaren patroia Giroidea denean bakarrik aplikatzen da." # AI Translated msgid "Sparse infill pattern" msgstr "Dentsitate baxuko betegarriaren patroia" # AI Translated msgid "This is the line pattern for internal sparse infill." msgstr "Hau da barruko dentsitate baxuko betegarriaren lerro-patroia." msgid "Zig Zag" msgstr "Zig Zag" msgid "Cross Zag" msgstr "Zeharkako sigi-saga" msgid "Locked Zag" msgstr "Zag blokeatua" msgid "Line" msgstr "Lerro" msgid "Grid" msgstr "Sareta" msgid "Tri-hexagon" msgstr "Tri-hexagonoa" msgid "Cubic" msgstr "Kubikoa" msgid "Adaptive Cubic" msgstr "Kubiko egokigarria" msgid "Quarter Cubic" msgstr "Kubiko laurdena" msgid "Support Cubic" msgstr "Euskarri kubikoa" msgid "Lightning" msgstr "Tximista" msgid "Honeycomb" msgstr "Abaraska" msgid "3D Honeycomb" msgstr "3D abaraska" msgid "Lateral Honeycomb" msgstr "Alboko abaraska" msgid "Lateral Lattice" msgstr "Alboko sareta" msgid "Cross Hatch" msgstr "Gurutzatutako itzaleztadura" msgid "TPMS-D" msgstr "TPMS-D" msgid "TPMS-FK" msgstr "TPMS-FK" msgid "Gyroid" msgstr "Giroidea" msgid "This is the acceleration of top surface infill. Using a lower value may improve top surface quality." msgstr "Hau da goiko gainazaleko betegarriaren azelerazioa. Balio txikiago batek goiko gainazalaren kalitatea hobetu dezake." msgid "Acceleration of outer wall: using a lower value can improve quality." msgstr "Kanpoko hormaren azelerazioa: balio txikiago batek kalitatea hobetu dezake." msgid "Acceleration of inner walls." msgstr "Barruko hormen azelerazioa." msgid "Acceleration of sparse infill. If the value is expressed as a percentage (e.g. 100%), it will be calculated based on the default acceleration." msgstr "Dentsitate baxuko betegarriaren azelerazioa. Balioa ehuneko gisa adierazten bada (adib. %100), azelerazio lehenetsiaren arabera kalkulatuko da." msgid "Acceleration of internal solid infill. If the value is expressed as a percentage (e.g. 100%), it will be calculated based on the default acceleration." msgstr "Barruko betegarri solidoaren azelerazioa. Balioa ehuneko gisa adierazten bada (adib. %100), azelerazio lehenetsiaren arabera kalkulatuko da." msgid "This is the printing acceleration for the first layer. Using limited acceleration can improve build plate adhesion." msgstr "Hau da lehen geruzaren inprimatze-azelerazioa. Azelerazio mugatuak inprimatze-plakarekiko atxikimendua hobetu dezake." msgid "Enable accel_to_decel" msgstr "Gaitu accel_to_decel" msgid "Klipper's max_accel_to_decel will be adjusted automatically." msgstr "Klipper-en max_accel_to_decel automatikoki doituko da." msgid "accel_to_decel" msgstr "accel_to_decel" #, c-format, boost-format msgid "Klipper's max_accel_to_decel will be adjusted to this %% of acceleration." msgstr "Klipper-en max_accel_to_decel azelerazioaren %% honetara doituko da." msgid "Default jerk." msgstr "Jerk lehenetsia." msgid "Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)." msgstr "Marlin firmwarearen lotura-desbideratzea (ohiko XY Jerk ezarpena ordezkatzen du)." msgid "Jerk of outer walls." msgstr "Kanpoko hormen jerk-a." msgid "Jerk of inner walls." msgstr "Barruko hormen jerk-a." msgid "Jerk for top surface." msgstr "Goiko gainazalaren jerk-a." msgid "Jerk for infill." msgstr "Betegarriaren jerk-a." msgid "Jerk for the first layer." msgstr "Lehen geruzako jerka." msgid "Jerk for travel." msgstr "Mugimenduaren jerk-a." msgid "" "Travel jerk of first layer.\n" "The percentage value is relative to Travel Jerk." msgstr "" "Lehen geruzaren desplazamenduetako jerk-a.\n" "Ehuneko-balioa desplazamenduetako Jerk-arekiko erlatiboa da." msgid "Line width of the first layer. If expressed as a %, it will be computed over the nozzle diameter." msgstr "Lehen geruzaren lerro-zabalera. % gisa adierazten bada, pitaren diametroaren arabera kalkulatuko da." msgid "First layer height" msgstr "Lehen geruzaren altuera" msgid "Height of the first layer. Making the first layer height thicker can improve build plate adhesion." msgstr "Lehen geruzaren altuera. Lehen geruza lodiagoak inprimatze-plakarekiko atxikimendua hobetu dezake." msgid "This is the speed for the first layer except for solid infill sections." msgstr "Hau da lehen geruzaren abiadura, betegarri solidoko atalak izan ezik." msgid "First layer infill" msgstr "Lehen geruzaren betegarria" msgid "This is the speed for solid infill parts of the first layer." msgstr "Hau da lehen geruzako betegarri solidoaren atalen abiadura." msgid "First layer travel speed" msgstr "Lehen geruzako mugimendu-abiadura" msgid "Travel speed of the first layer." msgstr "Lehen geruzako mugimendu-abiadura." msgid "Number of slow layers" msgstr "Geruza motelen kopurua" msgid "The first few layers are printed slower than normal. The speed is gradually increased in a linear fashion over the specified number of layers." msgstr "Lehen geruzak ohikoa baino motelago inprimatzen dira. Abiadura pixkanaka handitzen da modu linealean, zehaztutako geruza kopuruan zehar." msgid "First layer nozzle temperature" msgstr "Lehen geruzako pitaren tenperatura" msgid "Nozzle temperature for printing the first layer with this filament" msgstr "Filamentu honekin lehen geruza inprimatzeko pitaren tenperatura" msgid "Full fan speed at layer" msgstr "Haizagailuaren abiadura osoa geruzan" msgid "Fan speed will be ramped up linearly from zero at layer \"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower than \"close_fan_the_first_x_layers\", in which case the fan will be running at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "Haizagailuaren abiadura linealki handituko da zerotik \"close_fan_the_first_x_layers\" geruzan hasi eta gehienekora \"full_fan_speed_layer\" geruzan. \"full_fan_speed_layer\" ez da kontuan hartuko \"close_fan_the_first_x_layers\" baino txikiagoa bada." msgid "layer" msgstr "geruza" msgid "First layer fan speed" msgstr "Lehen geruzako haizagailuaren abiadura" msgid "" "Sets an exact fan speed for the first layer, overriding all other cooling settings. Useful for protecting 3D-printed toolhead parts (e.g. Voron-style ABS/ASA ducts) from a hot bed. A small amount of airflow cools the ducts down, without using full cooling that may in certain conditions hurt first-layer adhesion.\n" "From the second layer onwards, normal cooling resumes.\n" "If \"Full fan speed at layer\" is also set, the fan ramps smoothly from this value on the first layer up to your target by the chosen layer.\n" "Only available when \"No cooling for the first\" is 0.\n" "Set to -1 to disable it." msgstr "" "Lehen geruzarako haizagailuaren abiadura zehatza ezartzen du, gainerako hozte-ezarpen guztiak gainidatzita. Baliagarria da 3Dn inprimatutako inprimatze-buruaren piezak (adibidez, Voron estiloko ABS/ASA hodiak) ohe bero batetik babesteko. Aire-fluxu txiki batek hodiak hozten ditu, baldintza batzuetan lehen geruzaren itsaspena kaltetu dezakeen hozte osoa erabili gabe.\n" "Bigarren geruzatik aurrera, ohiko hoztea berrabiarazten da.\n" "\"Haizagailuaren abiadura osoa geruzan\" ere ezarrita badago, haizagailuaren abiadura leunki igotzen da lehen geruzako balio honetatik hautatutako geruzako helburura arte.\n" "\"Lehen geruzetan hozterik ez\" 0 denean bakarrik dago erabilgarri.\n" "Ezarri -1 desgaitzeko." msgid "Support interface fan speed" msgstr "Euskarri-interfazearen haizagailu-abiadura" msgid "" "This part cooling fan speed is applied when printing support interfaces. Setting this parameter to a higher than regular speed reduces the layer binding strength between supports and the supported part, making them easier to separate.\n" "Set to -1 to disable it.\n" "This setting is overridden by disable_fan_first_layers." msgstr "" "Piezaren hozte-haizagailuaren abiadura hau euskarri-interfazeak inprimatzean aplikatzen da. Ohikoa baino handiagoa ezartzeak euskarriak errazago bereizten laguntzen du.\n" "Ezarri -1 desgaitzeko.\n" "Ezarpen hau disable_fan_first_layers aukerak gainidazten du." msgid "Internal bridges fan speed" msgstr "Barruko zubien haizagailu-abiadura" msgid "" "The part cooling fan speed used for all internal bridges. Set to -1 to use the overhang fan speed settings instead.\n" "\n" "Reducing the internal bridges fan speed, compared to your regular fan speed, can help reduce part warping due to excessive cooling applied over a large surface for a prolonged period of time." msgstr "" "Barruko zubi guztietarako erabiltzen den piezaren hozte-haizagailuaren abiadura. Ezarri -1 irtenguneen haizagailu-ezarpenak erabiltzeko.\n" "\n" "Barruko zubien haizagailu-abiadura murrizteak piezaren okertzea murrizten lagun dezake." msgid "Ironing fan speed" msgstr "Haizagailuaren abiadura lisatzeko" msgid "" "This part cooling fan speed is applied when ironing. Setting this parameter to a lower than regular speed reduces possible nozzle clogging due to the low volumetric flow rate, making the interface smoother.\n" "Set to -1 to disable it." msgstr "" "Piezaren hozte-haizagailuaren abiadura hau lisatzean aplikatzen da. Ohiko abiadura baino txikiagoa ezartzeak pitaren buxadurak murrizten ditu, fluxu-tasa bolumetrikoa txikia delako, eta interfazea leunago uzten du.\n" "Ezarri -1 desgaitzeko." msgid "Ironing flow" msgstr "Lisatze-fluxua" msgid "Filament-specific override for ironing flow. This allows you to customize the ironing flow for each filament type. Too high value results in overextrusion on the surface." msgstr "Lisatzeko fluxuaren filamentuen araberako gainidazketa. Filamentu mota bakoitzerako lisatze-fluxua pertsonalizatzeko aukera ematen du. Balio handiegiek gainestrusioa eragiten dute gainazalean." msgid "Ironing line spacing" msgstr "Lisatze-lerroen tartea" msgid "Filament-specific override for ironing line spacing. This allows you to customize the spacing between ironing lines for each filament type." msgstr "Filamentu bakoitzerako lisatzearen lerro-tartea gainidazten du. Horri esker, filamentu mota bakoitzerako lisatze-lerroen arteko tartea pertsonaliza dezakezu." msgid "Ironing inset" msgstr "Lisatzearen barne-marjina" msgid "Filament-specific override for ironing inset. This allows you to customize the distance to keep from the edges when ironing for each filament type." msgstr "Filamentu bakoitzerako lisatzearen barne-tartea gainidazten du. Horri esker, filamentu mota bakoitzerako lisatzean ertzetatik mantendu beharreko distantzia pertsonaliza dezakezu." msgid "Ironing speed" msgstr "Lisatze-abiadura" msgid "Filament-specific override for ironing speed. This allows you to customize the print speed of ironing lines for each filament type." msgstr "Filamentu bakoitzerako lisatzearen abiadura gainidazten du. Horri esker, filamentu mota bakoitzerako lisatze-lerroen inprimatze-abiadura pertsonaliza dezakezu." msgid "This setting makes the toolhead randomly jitter while printing walls so that the surface has a rough textured look. This setting controls the fuzzy position." msgstr "Ezarpen honek inprimatze-burua ausaz dardararazten du hormak inprimatzean, gainazalari testura zimurra emateko. Ezarpenak gainazal zimurraren kokapena kontrolatzen du." msgid "Painted only" msgstr "Margotutakoan soilik" msgid "Contour" msgstr "Ingerada" msgid "Hole" msgstr "Zuloa" msgid "Contour and hole" msgstr "Ingerada eta zuloa" msgid "All walls" msgstr "Horma guztiak" msgid "Fuzzy skin thickness" msgstr "Gainazal zimurraren lodiera" msgid "The width of jittering: it’s recommended to keep this lower than the outer wall line width." msgstr "Dardararen zabalera; kanpoko hormaren lerro-zabalera baino txikiagoa izatea gomendatzen da." msgid "Fuzzy skin point distance" msgstr "Gainazal zimurreko puntuen distantzia" msgid "The average distance between the random points introduced on each line segment." msgstr "Lerro-segmentu bakoitzean sartzen diren ausazko puntuen batez besteko distantzia." msgid "Apply fuzzy skin to first layer" msgstr "Aplikatu gainazal zimurra lehen geruzari" msgid "Whether to apply fuzzy skin on the first layer." msgstr "Gainazal zimurra lehen geruzan aplikatu behar den." msgid "Fuzzy skin generator mode" msgstr "Gainazal zimurraren sorgailu-modua" # AI Translated #, c-format, boost-format msgid "" "Fuzzy skin generation mode. Works only with Arachne!\n" "Displacement: Сlassic mode when the pattern is formed by shifting the nozzle sideways from the original path.\n" "Extrusion: The mode when the pattern formed by the amount of extruded plastic. This is the fast and straight algorithm without unnecessary nozzle shake that gives a smooth pattern. But it is more useful for forming loose walls in the entire they array.\n" "Combined: Joint mode [Displacement] + [Extrusion]. The appearance of the walls is similar to [Displacement] Mode, but it leaves no pores between the perimeters.\n" "\n" "Attention! The [Extrusion] and [Combined] modes works only the fuzzy_skin_thickness parameter not more than the thickness of printed loop. At the same time, the width of the extrusion for a particular layer should also not be below a certain level. It is usually equal 15-25%% of a layer height. Therefore, the maximum fuzzy skin thickness with a perimeter width of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! If you enter a higher parameter than this, the error Flow::spacing() will displayed, and the model will not be sliced. You can choose this number until this error is repeated." msgstr "" "Gainazal zimurra sortzeko modua. Arachne-rekin bakarrik funtzionatzen du!\n" "Desplazamendua: modu klasikoa; patroia pita jatorrizko ibilbidetik alboetara mugituz sortzen da.\n" "Estrusioa: patroia estruitutako plastiko-kantitatearen bidez sortzen den modua. Algoritmo azkar eta zuzena da, pita alferrik astindu gabe patroi leuna sortzen duena. Hala ere, erabilgarriagoa da horma solteak multzo osoan sortzeko.\n" "Konbinatua: [Desplazamendua] + [Estrusioa] modu bateratua. Hormen itxura [Desplazamendua] moduaren antzekoa da, baina ez du pororik uzten perimetroen artean.\n" "\n" "Kontuz! [Estrusioa] eta [Konbinatua] moduek fuzzy_skin_thickness parametroa inprimatutako begiztaren lodiera baino handiagoa ez denean bakarrik funtzionatzen dute. Aldi berean, geruza jakin bateko estrusio-zabalera ere ezin da maila jakin batetik beherakoa izan. Normalean, geruza-altueraren 15-25%% izaten da. Beraz, 0,4 mm-ko perimetro-zabalerarekin eta 0,2 mm-ko geruza-altuerarekin, gainazal zimurraren gehieneko lodiera 0,4-(0,2*0,25)=±0,35 mm izango da! Balio handiagoa sartzen baduzu, Flow::spacing() errorea bistaratuko da eta modeloa ez da xerratuko. Zenbaki hori doitu dezakezu errorea berriro agertu arte." msgid "Displacement" msgstr "Desplazamendua" msgid "Extrusion" msgstr "Estrusioa" msgid "Combined" msgstr "Konbinatua" msgid "Fuzzy skin noise type" msgstr "Gainazal zimurraren zarata mota" # AI Translated msgid "" "Noise type to use for fuzzy skin generation:\n" "Classic: Classic uniform random noise.\n" "Perlin: Perlin noise, which gives a more consistent texture.\n" "Billow: Similar to perlin noise, but clumpier.\n" "Ridged Multifractal: Ridged noise with sharp, jagged features. Creates marble-like textures.\n" "Voronoi: Divides the surface into voronoi cells, and displaces each one by a random amount. Creates a patchwork texture.\n" "Ripple: Uniform ripple pattern that ripples left and right of the original path. Repeating pattern, woven appearance." msgstr "" "Gainazal zimurra sortzeko zarata mota:\n" "Klasikoa: ausazko zarata uniforme klasikoa.\n" "Perlin: Perlin zarata, testura koherenteagoa ematen duena.\n" "Ondulatua: Perlin zarataren antzekoa, baina multzo handiagoekin eta pikortsuagoa.\n" "Multifraktal Zimurra: ertz zorrotz eta irregularrak dituen zarata. Marmol-itxurako testurak sortzen ditu.\n" "Voronoi: gainazala Voronoi gelaxkatan banatzen du eta bakoitza ausaz desplazatzen du. Adabaki-itxurako testura sortzen du.\n" "Uhin formakoa: jatorrizko bidearen ezker-eskuin errepikatzen den uhin-patroi uniformea. Ehundu-itxura ematen du." msgid "Classic" msgstr "Klasikoa" msgid "Perlin" msgstr "Perlin" msgid "Billow" msgstr "Ondulatua" msgid "Ridged Multifractal" msgstr "Multifraktal Zimurra" msgid "Voronoi" msgstr "Voronoi" msgid "Ripple" msgstr "Uhina" msgid "Fuzzy skin feature size" msgstr "Gainazal zimurraren ezaugarri-tamaina" msgid "The base size of the coherent noise features, in mm. Higher values will result in larger features." msgstr "Zarata-ezaugarri koherenteen oinarrizko tamaina, mm-tan. Balio handiagoek ezaugarri handiagoak sortuko dituzte." msgid "Fuzzy Skin Noise Octaves" msgstr "Gainazal zimurraren zarata-oktaba kopurua" msgid "The number of octaves of coherent noise to use. Higher values increase the detail of the noise, but also increase computation time." msgstr "Erabili beharreko zarata koherentearen oktaba kopurua. Balio handiagoek zarataren xehetasuna handitzen dute, baina kalkulu-denbora ere handitzen dute." msgid "Fuzzy skin noise persistence" msgstr "Gainazal zimurraren zarata-persistentzia" msgid "The decay rate for higher octaves of the coherent noise. Lower values will result in smoother noise." msgstr "Zarata koherentearen oktaba altuagoen gainbehera-tasa. Balio txikiagoek zarata leunagoa emango dute." msgid "Number of ripples per layer" msgstr "Geruza bakoitzeko uhin kopurua" msgid "Controls how many full cycles of ripples will be added per layer." msgstr "Geruza bakoitzean zenbat uhin-ziklo oso gehituko diren kontrolatzen du." msgid "Ripple offset" msgstr "Uhinaren desplazamendua" # AI Translated msgid "" "Shifts the ripple phase forward along the print path by the specified percentage of a wavelength each layer period.\n" "- 0% keeps every layer identical.\n" "- 50% shifts the pattern by half a wavelength, effectively inverting the phase.\n" "- 100% shifts the pattern by a full wavelength, returning to the original phase.\n" "\n" "The shift is applied once every number of layers set by Layers between ripple offset, so layers within the same group are printed identically." msgstr "" "Geruza-periodo bakoitzean uhinaren fasea inprimatze-ibilbidean aurrerantz desplazatzen du, uhin-luzeraren zehaztutako ehunekoan.\n" "- 0%ek geruza guztiak berdin mantentzen ditu.\n" "- 50%ek patroia uhin-luzera erdi desplazatzen du, fasea alderantzikatuz.\n" "- 100%ek patroia uhin-luzera oso bat desplazatzen du, jatorrizko fasera itzuliz.\n" "\n" "Desplazamendua behin aplikatzen da Uhin-desplazamenduaren arteko geruzak aukeran ezarritako geruza kopuru bakoitzean; beraz, talde bereko geruzak berdin inprimatzen dira." msgid "Layers between ripple offset" msgstr "Uhin-desplazamenduaren arteko geruzak" # AI Translated msgid "" "Specifies how many consecutive layers share the same ripple phase before the offset is applied.\n" "For example:\n" "- 1 = Layer 1 is printed with the base ripple pattern, then layer 2 is shifted by the configured offset, then layer 3 returns to the base pattern, and so on.\n" "- 3 = Layers 1 to 3 are printed with the base ripple pattern, then layers 4 to 6 are shifted by the configured offset, then layers 7 to 9 return to the base pattern, etc." msgstr "" "Desplazamendua aplikatu aurretik zenbat geruza jarraik partekatzen duten uhin-fase bera zehazten du.\n" "Adibidez:\n" "- 1 = 1. geruza oinarrizko uhin-patroiarekin inprimatzen da; 2. geruza konfiguratutako desplazamenduarekin; 3. geruza berriro oinarrizko patroiarekin; eta horrela jarraitzen du.\n" "- 3 = 1etik 3ra bitarteko geruzak oinarrizko uhin-patroiarekin inprimatzen dira; 4tik 6ra bitartekoak konfiguratutako desplazamenduarekin; 7tik 9ra bitartekoak berriro oinarrizko patroiarekin; eta abar." msgid "Filter out tiny gaps" msgstr "Iragazi hutsune txikiak" msgid "Layers and Perimeters" msgstr "Geruzak eta perimetroak" msgid "Don't print gap fill with a length is smaller than the threshold specified (in mm). This setting applies to top, bottom and solid infill and, if using the classic perimeter generator, to wall gap fill." msgstr "Ez inprimatu zehaztutako atalasea baino laburragoa den hutsune-betetzerik (mm-tan). Ezarpen hau goiko, beheko eta betegarri solidoari aplikatzen zaie eta, perimetro-sorgailu klasikoa erabiliz gero, hormen hutsune-betetzeari ere bai." msgid "This is the speed for gap infill. Gaps usually have irregular line width and should be printed more slowly." msgstr "Hau da hutsune-betegarriaren abiadura. Hutsuneek lerro-zabalera irregularra izaten dute eta motelago inprimatu behar dira." msgid "Precise Z height" msgstr "Z altuera zehatza" msgid "Enable this to get precise Z height of object after slicing. It will get the precise object height by fine-tuning the layer heights of the last few layers. Note that this is an experimental parameter." msgstr "Gaitu hau xerratu ondoren objektuaren Z altuera zehatza lortzeko. Azken geruzen altuerak fintzen ditu objektuaren benetako altuera lortzeko. Parametro esperimentala da." msgid "Arc fitting" msgstr "Arku-egokitzea" msgid "" "Enable this to get a G-code file which has G2 and G3 moves. The fitting tolerance is same as the resolution.\n" "\n" "Note: For Klipper machines, this option is recommended to be disabled. Klipper does not benefit from arc commands as these are split again into line segments by the firmware. This results in a reduction in surface quality as line segments are converted to arcs by the slicer and then back to line segments by the firmware." msgstr "" "Gaitu hau G2 eta G3 mugimenduak dituen G-code fitxategi bat lortzeko. Egokitze-perdoia bereizmenaren berdina da.\n" "\n" "Oharra: Klipper makinetan, aukera hau desgaitzea gomendatzen da. Klipperrek ez du arku-komandoetatik onurarik ateratzen, firmwareak berriro lerro-segmentutan zatitzen baititu. Horrek gainazal-kalitatea murrizten du." msgid "Add line number" msgstr "Gehitu lerro-zenbakia" msgid "Enable this to add line number(Nx) at the beginning of each G-code line." msgstr "Gaitu hau G-code lerro bakoitzaren hasieran lerro-zenbakia (Nx) gehitzeko." msgid "Scan first layer" msgstr "Eskaneatu lehen geruza" msgid "Enable this to allow the camera on the printer to check the quality of the first layer." msgstr "Gaitu hau inprimagailuko kamerak lehen geruzaren kalitatea egiaztatzeko." msgid "Power Loss Recovery" msgstr "Argindarra etetean berreskuratzea" msgid "Choose how to control power loss recovery. When set to Printer configuration, the slicer will not emit power loss recovery G-code and will leave the printer's configuration unchanged. Applicable to Bambu Lab or Marlin 2 firmware based printers." msgstr "Aukeratu nola kontrolatu argindarra etetean berreskuratzea. Inprimagailuaren konfigurazioa hautatzen denean, xerratzaileak ez du argindarra etetean berreskuratzeko G-code-rik sortuko eta inprimagailuaren konfigurazioa bere horretan utziko du. Bambu Lab edo Marlin 2 firmwarean oinarritutako inprimagailuei aplikatzen zaie." msgid "Printer configuration" msgstr "Inprimagailuaren konfigurazioa" msgid "Nozzle type" msgstr "Pita mota" msgid "The metallic material of the nozzle: This determines the abrasive resistance of the nozzle and what kind of filament can be printed." msgstr "Pitaren material metalikoa: honek pitaren urradurarekiko erresistentzia eta inprima daitezkeen filamentuak zehazten ditu." msgid "Hardened steel" msgstr "Altzairu gogortua" msgid "Stainless steel" msgstr "Altzairu herdoilgaitza" msgid "Tungsten carbide" msgstr "Wolframio-karburoa" msgid "Nozzle HRC" msgstr "Pitaren HRC" msgid "The nozzle's hardness. Zero means no checking for nozzle hardness during slicing." msgstr "Pitaren gogortasuna. Zero balioak xerratzean pitaren gogortasuna ez egiaztatzea esan nahi du." msgid "HRC" msgstr "HRC" msgid "Printer structure" msgstr "Inprimagailuaren egitura" msgid "The physical arrangement and components of a printing device." msgstr "Inprimatzeko gailuaren antolamendu fisikoa eta osagaiak." msgid "CoreXY" msgstr "CoreXY" msgid "I3" msgstr "I3" msgid "Hbot" msgstr "Hbot" msgid "Delta" msgstr "Delta" msgid "Best object position" msgstr "Objektuaren kokapen onena" msgid "Best auto arranging position in range [0,1] w.r.t. bed shape." msgstr "Ohearen formarekiko [0,1] tartean automatikoki antolatzeko posizio onena." msgid "Enable this option if machine has auxiliary part cooling fan. G-code command: M106 P2 S(0-255)." msgstr "Gaitu aukera hau makinak piezaren hozterako haizagailu lagungarria badu. G-code komandoa: M106 P2 S(0-255)." msgid "Fan direction" msgstr "Haizagailuaren norabidea" msgid "Cooling fan direction of the printer" msgstr "Inprimagailuko hozte-haizagailuaren norabidea" msgid "Both" msgstr "Biak" msgid "" "Start the fan this number of seconds earlier than its target start time (you can use fractional seconds). It assumes infinite acceleration for this time estimation, and will only take into account G1 and G0 moves (arc fitting is unsupported).\n" "It won't move fan commands from custom G-code (they act as a sort of 'barrier').\n" "It won't move fan commands into the start G-code if the 'only custom start G-code' is activated.\n" "Use 0 to deactivate." msgstr "" "Abiarazi haizagailua helburuko hasiera-denbora baino segundo kopuru hau lehenago (segundo zatikiak erabil ditzakezu). Denbora-estimazio honetarako azelerazio infinitua suposatzen du, eta G1 eta G0 mugimenduak bakarrik hartuko ditu kontuan.\n" "Ez ditu haizagailu-komandoak G-code pertsonalizatutik mugituko.\n" "Ez ditu haizagailu-komandoak hasierako G-codera mugituko 'hasierako G-code pertsonalizatua soilik' aktibatuta badago.\n" "Erabili 0 desaktibatzeko." msgid "Only overhangs" msgstr "Irtenguneak soilik" msgid "Will only take into account the delay for the cooling of overhangs." msgstr "Irtenguneen hozterako atzerapena bakarrik hartuko du kontuan." msgid "Fan kick-start time" msgstr "Haizagailuaren abio-denbora" msgid "" "Emit a max fan speed command for this amount of seconds before reducing to target speed to kick-start the cooling fan.\n" "This is useful for fans where a low PWM/power may be insufficient to get the fan started spinning from a stop, or to get the fan up to speed faster.\n" "Set to 0 to deactivate." msgstr "" "Bidali haizagailuaren gehieneko abiadura-komando bat segundo kopuru honetarako, helburuko abiadurara jaitsi aurretik, hozte-haizagailua abiarazteko.\n" "Hau erabilgarria da PWM/potentzia baxua nahikoa ez duten haizagailuentzat.\n" "Ezarri 0 desaktibatzeko." msgid "Minimum non-zero part cooling fan speed" msgstr "Zero ez den piezaren hozte-haizagailuaren gutxieneko abiadura" msgid "" "Some part-cooling fans cannot start spinning when commanded below a certain PWM duty cycle. When set above 0, any non-zero part-cooling fan command will be raised to at least this percentage so the fan reliably starts. A fan command of 0 (fan off) is always honoured exactly. This clamp is applied after every other fan calculation (first-layer ramp, layer-time interpolation, overhang/bridge/support-interface/ironing overrides), so scaling still operates within the range [this value, 100%].\n" "If your firmware already disables the fan below a threshold (for example Klipper's [fan] off_below: 0.10 shuts the fan off whenever the commanded duty cycle is below 10%), this option and the firmware threshold should ideally be set to the same value. Matching them (e.g. off_below: 0.10 in Klipper and 10% here) guarantees the slicer never emits a non-zero value that the firmware would silently drop, and the fan never receives a value below the one you know it can actually spool at.\n" "Set to 0 to deactivate." msgstr "" "Piezak hozteko haizagailu batzuk ezin dira biratzen hasi PWM lan-ziklo jakin batetik beherako agindua jasotzen dutenean. Balioa 0 baino handiagoa bada, piezak hozteko haizagailuaren zero ez den edozein agindu gutxienez ehuneko horretara igoko da, haizagailua fidagarritasunez abiatzeko. 0 balioko agindua (haizagailua itzalita) beti errespetatzen da zehazki. Muga hori gainerako haizagailu-kalkulu guztien ondoren aplikatzen da (lehen geruzako igoera, geruza-denboraren interpolazioa eta irtengune, zubi, euskarri-interfaze eta lisatzearen gainidazteak); beraz, eskalatzeak [balio hau, %100] tartean funtzionatzen jarraitzen du.\n" "Firmwareak dagoeneko haizagailua atalase batetik behera desgaitzen badu (adibidez, Klipper-en [fan] off_below: 0.10 aukerak haizagailua itzaltzen du agindutako lan-zikloa %10etik beherakoa denean), aukera hau eta firmwareko atalasea balio berean ezartzea komeni da. Biak berdinduta (adibidez, Klipper-en off_below: 0.10 eta hemen %10), xerratzaileak ez du inoiz firmwareak isilean baztertuko duen zero ez den baliorik sortuko, eta haizagailuak ez du benetan abiarazteko gai den balioa baino txikiagorik jasoko.\n" "Ezarri 0 desaktibatzeko." msgid "Time cost" msgstr "Denbora-kostua" msgid "The printer cost per hour." msgstr "Inprimagailuaren orduko kostua." msgid "money/h" msgstr "dirua/h" msgid "Support controlling chamber temperature" msgstr "Ganberako tenperatura kontrolatzeko funtzioa" msgid "" "This option is enabled if machine support controlling chamber temperature\n" "G-code command: M141 S(0-255)" msgstr "" "Aukera hau gaituta dago makinak ganberako tenperatura kontrolatzea onartzen badu\n" "G-code komandoa: M141 S(0-255)" msgid "Support air filtration" msgstr "Aire-iragazketa onartu" msgid "" "Enable this if printer support air filtration\n" "G-code command: M106 P3 S(0-255)" msgstr "" "Gaitu hau inprimagailuak aire-iragazketa onartzen badu\n" "G-code komandoa: M106 P3 S(0-255)" msgid "Use cooling filter" msgstr "Erabili hozte-iragazkia" msgid "Enable this if printer support cooling filter" msgstr "Gaitu hau inprimagailuak hozte-iragazkia onartzen badu" msgid "G-code flavor" msgstr "G-code zaporea" msgid "What kind of G-code the printer is compatible with." msgstr "Inprimagailua zer G-code motarekin den bateragarria." msgid "Klipper" msgstr "Klipper" msgid "Pellet Modded Printer" msgstr "Pelletekin moldatutako inprimagailua" msgid "Enable this option if your printer uses pellets instead of filaments." msgstr "Gaitu aukera hau zure inprimagailuak filamentuen ordez pelletak erabiltzen baditu." msgid "Support multi bed types" msgstr "Ohe mota anitz onartu" msgid "Enable this option if you want to use multiple bed types." msgstr "Gaitu aukera hau ohe mota bat baino gehiago erabili nahi baduzu." msgid "Label objects" msgstr "Etiketatu objektuak" msgid "Enable this to add comments into the G-code labeling print moves with what object they belong to, which is useful for the Octoprint CancelObject plug-in. This setting is NOT compatible with Single Extruder Multi Material setup and Wipe into Object / Wipe into Infill." msgstr "Gaitu hau G-codean iruzkinak gehitzeko eta inprimatze-mugimendu bakoitza zein objekturi dagokion adierazteko; erabilgarria da Octoprint CancelObject pluginerako. Ez da bateragarria estrusore bakarreko material anitzeko konfigurazioarekin, ezta objektura edo betegarrira purgatzearekin ere." msgid "Exclude objects" msgstr "Baztertu objektuak" msgid "Enable this option to add EXCLUDE OBJECT command in G-code." msgstr "Gaitu aukera hau G-codean EXCLUDE OBJECT komandoa gehitzeko." msgid "Verbose G-code" msgstr "G-code xehea" msgid "Enable this to get a commented G-code file, with each line explained by a descriptive text. If you print from SD card, the additional weight of the file could make your firmware slow down." msgstr "Gaitu hau iruzkindutako G-code fitxategi bat lortzeko, lerro bakoitza azalpen-testu batekin argituta. SD txarteletik inprimatzen baduzu, fitxategiaren pisu gehigarriak firmwarea moteldu dezake." msgid "Infill combination" msgstr "Betegarri-konbinazioa" msgid "Automatically combine sparse infill of several layers to print together in order to reduce time. Walls are still printed with original layer height." msgstr "Konbinatu automatikoki hainbat geruzatako dentsitate baxuko betegarria elkarrekin inprimatzeko eta denbora aurrezteko. Hormak jatorrizko geruza-altuerarekin inprimatzen dira." msgid "Infill shift step" msgstr "Betegarriaren desplazamendu-urratsa" msgid "This parameter adds a slight displacement to each layer of infill to create a cross texture." msgstr "Parametro honek desplazamendu txiki bat gehitzen dio betegarri-geruza bakoitzari, testura gurutzatua sortzeko." msgid "Sparse infill rotation template" msgstr "Dentsitate baxuko betegarriaren biraketa-txantiloia" # AI Translated msgid "Rotate the sparse infill direction per layer using a template of angles. Enter comma-separated degrees (e.g., '0,30,60,90'). Angles are applied in order by layer and repeat when the list ends. Advanced syntax is supported: '+5' rotates +5° every layer; '+5#5' rotates +5° every 5 layers. See the Wiki for details. When a template is set, the standard infill direction setting is ignored. Note: some infill patterns (e.g., Gyroid) control rotation themselves; use with care." msgstr "Biratu dentsitate baxuko betegarriaren norabidea geruza bakoitzean, angelu-txantiloi bat erabiliz. Sartu komaz bereizitako graduak (adibidez, '0,30,60,90'). Angeluak ordenan aplikatzen dira geruzaz geruza, eta zerrenda amaitzean errepikatu egiten dira. Sintaxi aurreratua ere onartzen da: '+5' aukerak geruza bakoitzean +5° biratzen du; '+5#5' aukerak, berriz, +5° bost geruzatik behin. Xehetasunetarako, ikusi Wikia. Txantiloi bat ezartzen denean, betegarriaren norabide estandarraren ezarpena ez da kontuan hartzen. Oharra: betegarri-patroi batzuek (adibidez, Giroidea) beren kabuz kontrolatzen dute biraketa; erabili kontuz." msgid "Solid infill rotation template" msgstr "Betegarri solidoaren biraketa-txantiloia" # AI Translated msgid "This parameter adds a rotation of solid infill direction to each layer according to the specified template. The template is a comma-separated list of angles in degrees, e.g. '0,90'. The first angle is applied to the first layer, the second angle to the second layer, and so on. If there are more layers than angles, the angles will be repeated. Note that not all solid infill patterns support rotation." msgstr "Parametro honek betegarri solidoaren norabidea geruza bakoitzean biratzen du, zehaztutako txantiloiaren arabera. Txantiloia komaz bereizitako graduetako angeluen zerrenda da, adibidez '0,90'. Lehen angelua lehen geruzari aplikatzen zaio, bigarrena bigarren geruzari, eta horrela jarraitzen du. Geruza gehiago badaude angeluak baino, angeluak errepikatu egingo dira. Kontuan izan betegarri solidoaren patroi guztiek ez dutela biraketa onartzen." msgid "Skeleton infill density" msgstr "Eskeleto-betegarriaren dentsitatea" msgid "The remaining part of the model contour after removing a certain depth from the surface is called the skeleton. This parameter is used to adjust the density of this section. When two regions have the same sparse infill settings but different skeleton densities, their skeleton areas will develop overlapping sections. Default is as same as infill density." msgstr "Gainazaletik sakonera jakin bat kendu ondoren geratzen den modeloaren sestra-zatiari eskeletoa esaten zaio. Parametro hau atal horren dentsitatea doitzeko erabiltzen da. Bi eremuk dentsitate baxuko betegarriaren ezarpen berak baina eskeleto-dentsitate desberdinak dituztenean, haien eskeleto-eremuetan gainjarritako atalak sortuko dira. Balio lehenetsia betegarriaren dentsitatearen berdina da." msgid "Skin infill density" msgstr "Gainazal-betegarriaren dentsitatea" msgid "The portion of the model's outer surface within a certain depth range is called the skin. This parameter is used to adjust the density of this section. When two regions have the same sparse infill settings but different skin densities, this area will not be split into two separate regions. Default is as same as infill density." msgstr "Sakonera-tarte jakin baten barruan dagoen modeloaren kanpoko gainazal-zatiari gainazala esaten zaio. Parametro hau atal horren dentsitatea doitzeko erabiltzen da. Bi eskualdek dentsitate baxuko betegarriaren ezarpen berak baina gainazal-dentsitate desberdinak dituztenean, eremu hori ez da bi eskualde bereizitan zatituko. Balio lehenetsia betegarriaren dentsitatearen berdina da." msgid "Skin infill depth" msgstr "Gainazal-betegarriaren sakonera" msgid "The parameter sets the depth of skin." msgstr "Parametroak gainazalaren sakonera ezartzen du." msgid "Infill lock depth" msgstr "Betegarriaren blokeo-sakonera" msgid "The parameter sets the overlapping depth between the interior and skin." msgstr "Parametroak barrualdearen eta gainazalaren arteko gainjartze-sakonera ezartzen du." msgid "Skin line width" msgstr "Gainazalaren lerro-zabalera" msgid "Adjust the line width of the selected skin paths." msgstr "Doitu hautatutako gainazal-ibilbideen lerro-zabalera." msgid "Skeleton line width" msgstr "Eskeletoaren lerro-zabalera" msgid "Adjust the line width of the selected skeleton paths." msgstr "Doitu hautatutako eskeleto-ibilbideen lerro-zabalera." msgid "Symmetric infill Y axis" msgstr "Betegarri simetrikoaren Y ardatza" msgid "If the model has two parts that are symmetric about the Y axis, and you want these parts to have symmetric textures, please click this option on one of the parts." msgstr "Modeloak Y ardatzarekiko simetrikoak diren bi zati baditu eta zati horiek testura simetrikoak izatea nahi baduzu, aktibatu aukera hau zatietako batean." msgid "Infill combination - Max layer height" msgstr "Betegarri-konbinazioa - Gehieneko geruza-altuera" msgid "" "Maximum layer height for the combined sparse infill.\n" "\n" "Set it to 0 or 100% to use the nozzle diameter (for maximum reduction in print time) or a value of ~80% to maximize sparse infill strength.\n" "\n" "The number of layers over which infill is combined is derived by dividing this value with the layer height and rounded down to the nearest decimal.\n" "\n" "Use either absolute mm values (eg. 0.32mm for a 0.4mm nozzle) or % values (eg 80%). This value must not be larger than the nozzle diameter." msgstr "" "Konbinatutako dentsitate baxuko betegarriaren gehieneko geruza-altuera.\n" "\n" "Ezarri 0 edo %100 pitaren diametroa erabiltzeko edo ~%80 inguruko balio bat dentsitate baxuko betegarriaren sendotasuna maximizatzeko.\n" "\n" "Betegarria zenbat geruzatan konbinatzen den balio hau geruza-altuerarekin zatituz kalkulatzen da.\n" "\n" "Erabili mm balio absolutuak edo % balioak. Balio hau ezin da izan pitaren diametroa baino handiagoa." msgid "Enable clumping detection" msgstr "Gaitu material-metaketa detektatzea" msgid "Clumping detection layers" msgstr "Material-metaketa detektatzeko geruzak" msgid "Clumping detection layers." msgstr "Material-metaketa detektatzeko geruzak." msgid "Probing exclude area of clumping" msgstr "Material-metaketa detektatzeko baztertutako haztatze-eremua" msgid "Probing exclude area of clumping." msgstr "Material-metaketa detektatzeko baztertutako haztatze-eremua." msgid "Lateral lattice angle 1" msgstr "Alboko sareta-angelua 1" msgid "The angle of the first set of Lateral lattice elements in the Z direction. Zero is vertical." msgstr "Z norabideko alboko sareta-elementuen lehen multzoaren angelua. Zero bertikala da." msgid "Lateral lattice angle 2" msgstr "Alboko sareta-angelua 2" msgid "The angle of the second set of Lateral lattice elements in the Z direction. Zero is vertical." msgstr "Z norabideko alboko sareta-elementuen bigarren multzoaren angelua. Zero bertikala da." msgid "Infill overhang angle" msgstr "Betegarriaren irtengune-angelua" msgid "The angle of the infill angled lines. 60° will result in a pure honeycomb." msgstr "Betegarriaren lerro inklinatuen angelua. 60°-ko balioak abaraska hutsa sortuko du." msgid "Lightning overhang angle" msgstr "Tximista-betegarriaren irtengune-angelua" msgid "Maximum overhang angle for Lightning infill support propagation." msgstr "Tximista-betegarriaren euskarri-hedapenerako gehieneko irtengune-angelua." msgid "Prune angle" msgstr "Inausketa-angelua" msgid "" "Controls how aggressively short or unsupported Lightning branches are pruned.\n" "This angle is converted internally to a per-layer distance." msgstr "" "Tximista-adar laburrak edo euskarririk gabekoak zenbaterainoko zorroztasunez inausten diren kontrolatzen du.\n" "Angelu hori barrutik geruza bakoitzeko distantzia bihurtzen da." msgid "Straightening angle" msgstr "Zuzenketa-angelua" msgid "Maximum straightening angle used to simplify Lightning branches." msgstr "Lightning adarrak sinplifikatzeko erabiltzen den gehieneko zuzentze-angelua." msgid "Sparse infill anchor length" msgstr "Dentsitate baxuko betegarriaren aingura-luzera" msgid "" "Connect an infill line to an internal perimeter with a short segment of an additional perimeter. If expressed as percentage (example: 15%) it is calculated over infill extrusion width. Orca Slicer tries to connect two close infill lines to a short perimeter segment. If no such perimeter segment shorter than infill_anchor_max is found, the infill line is connected to a perimeter segment at just one side and the length of the perimeter segment taken is limited to this parameter, but no longer than anchor_length_max.\n" "Set this parameter to zero to disable anchoring perimeters connected to a single infill line." msgstr "" "Konektatu betegarri-lerro bat barruko perimetro batera, perimetro gehigarri baten segmentu labur batekin. Portzentaje gisa adierazten bada (adibidez: %15), betegarriaren estrusio-zabaleraren arabera kalkulatzen da. OrcaSlicerrek elkarren hurbil dauden bi betegarri-lerro perimetro-segmentu labur batera konektatzen saiatzen da. infill_anchor_max baino laburragoa den halako perimetro-segmenturik aurkitzen ez bada, betegarri-lerroa alde bakarreko perimetro-segmentu batera konektatzen da, eta hartutako perimetro-segmentuaren luzera parametro honek mugatzen du, baina inoiz ez anchor_length_max baino luzeago.\n" "Ezarri parametro hau zero balioan betegarri-lerro bakar bati konektatutako ainguratze-perimetroak desgaitzeko." msgid "0 (no open anchors)" msgstr "0 (aingura irekirik ez)" msgid "1000 (unlimited)" msgstr "1000 (mugarik gabe)" msgid "Maximum length of the infill anchor" msgstr "Betegarri-ainguraren gehieneko luzera" msgid "" "Connect an infill line to an internal perimeter with a short segment of an additional perimeter. If expressed as percentage (example: 15%) it is calculated over infill extrusion width. Orca Slicer tries to connect two close infill lines to a short perimeter segment. If no such perimeter segment shorter than this parameter is found, the infill line is connected to a perimeter segment at just one side and the length of the perimeter segment taken is limited to infill_anchor, but no longer than this parameter.\n" "If set to 0, the old algorithm for infill connection will be used, it should create the same result as with 1000 & 0." msgstr "" "Konektatu betegarri-lerro bat barruko perimetro batera, perimetro gehigarri baten segmentu labur batekin. Portzentaje gisa adierazten bada (adibidez: %15), betegarriaren estrusio-zabaleraren arabera kalkulatzen da. OrcaSlicerrek elkarren hurbil dauden bi betegarri-lerro perimetro-segmentu labur batera konektatzen saiatzen da. Parametro hau baino laburragoa den halako perimetro-segmenturik aurkitzen ez bada, betegarri-lerroa alde bakarreko perimetro-segmentu batera konektatzen da, eta hartutako perimetro-segmentuaren luzera infill_anchor balioak mugatzen du, baina inoiz ez parametro hau baino luzeago.\n" "0 balioan ezartzen bada, betegarriaren konexiorako algoritmo zaharra erabiliko da; emaitza 1000 eta 0 balioekin lortutakoaren berdina izan beharko litzateke." msgid "0 (Simple connect)" msgstr "0 (konexio sinplea)" msgid "" "Filament to print internal sparse infill.\n" "\"Default\" uses the active object/part filament." msgstr "" "Barruko dentsitate baxuko betegarria inprimatzeko filamentua.\n" "\"Lehenetsia\" aukerak objektu/pieza aktiboaren filamentua erabiltzen du." msgid "Line width of internal sparse infill. If expressed as a %, it will be computed over the nozzle diameter." msgstr "Barruko dentsitate baxuko betegarriaren lerro-zabalera. %-tan adierazten bada, pitaren diametroaren arabera kalkulatuko da." msgid "Infill/wall overlap" msgstr "Betegarriaren eta hormaren gainjartzea" #, no-c-format, no-boost-format msgid "This allows the infill area to be enlarged slightly to overlap with walls for better bonding. The percentage value is relative to line width of sparse infill. Set this value to ~10-15% to minimize potential over extrusion and accumulation of material resulting in rough top surfaces." msgstr "Betegarri-eremua apur bat handitzen du hormekin gainjartzeko eta lotura hobetzeko. Ehunekoa dentsitate baxuko betegarriaren lerro-zabalerarekiko da. Ezarri gutxi gorabehera %10-15, gainestrusioa eta goiko gainazal zakarrak sor ditzakeen material-pilaketa gutxitzeko." msgid "Top/Bottom solid infill/wall overlap" msgstr "Goiko/Beheko betegarri solidoaren eta hormaren gainjartzea" #, no-c-format, no-boost-format msgid "Top solid infill area is enlarged slightly to overlap with wall for better bonding and to minimize the appearance of pinholes where the top infill meets the walls. A value of 25-30% is a good starting point, minimizing the appearance of pinholes. The percentage value is relative to line width of sparse infill." msgstr "Goiko betegarri solidoaren eremua pixka bat handitzen da hormarekin gainjartzeko, lotura hobetzeko eta goiko betegarria hormekin elkartzen den tokian zulotxoen itxura minimizatzeko. %25-30 inguruko balioa abiapuntu ona da." msgid "This is the speed for internal sparse infill." msgstr "Hau da barruko dentsitate baxuko betegarriaren abiadura." msgid "Inherits profile" msgstr "Profila herentzian hartzen du" msgid "Name of parent profile." msgstr "Guraso-profilaren izena." msgid "Interface shells" msgstr "Interfaze-oskolak" msgid "Force the generation of solid shells between adjacent materials/volumes. Useful for multi-extruder prints with translucent materials or manual soluble support material." msgstr "Behartu material/bolumen mugakideen artean oskol solidoak sortzea. Erabilgarria da estrusore anitzeko inprimaketetan material gardenekin edo eskuzko euskarri-material disolbagarriarekin." msgid "Maximum width of a segmented region" msgstr "Eskualde segmentatu baten gehieneko zabalera" msgid "Maximum width of a segmented region. A value of 0 disables this feature." msgstr "Segmentatutako eremu baten gehieneko zabalera. 0 balioak ezaugarria desgaitzen du." msgid "Interlocking depth of a segmented region" msgstr "Eskualde segmentatu baten elkarblokeatze-sakonera" msgid "Interlocking depth of a segmented region. It will be ignored if \"mmu_segmented_region_max_width\" is zero or if \"mmu_segmented_region_interlocking_depth\" is bigger than \"mmu_segmented_region_max_width\". Zero disables this feature." msgstr "Eskualde segmentatu baten elkarblokeatze-sakonera. Ez da kontuan hartuko \"mmu_segmented_region_max_width\" zero bada edo \"mmu_segmented_region_interlocking_depth\" \"mmu_segmented_region_max_width\" baino handiagoa bada. Zero balioak ezaugarri hau desgaitzen du." msgid "Use beam interlocking" msgstr "Erabili habeen elkarblokeatzea" msgid "Generate interlocking beam structure at the locations where different filaments touch. This improves the adhesion between filaments, especially models printed in different materials." msgstr "Sortu elkarblokeatzeko habe-egitura filamentu desberdinak ukitzen diren lekuetan. Horrek filamentuen arteko itsaspena hobetzen du, bereziki material desberdinekin inprimatutako modeloetan." msgid "Interlocking beam width" msgstr "Elkarblokeatzeko habearen zabalera" msgid "The width of the interlocking structure beams." msgstr "Elkarblokeatzeko egituraren habe-zabalera." msgid "Interlocking direction" msgstr "Elkarblokeatzearen norabidea" msgid "Orientation of interlock beams." msgstr "Elkarblokeatzeko habeen orientazioa." msgid "Interlocking beam layers" msgstr "Elkarblokeatzeko habe-geruzak" msgid "The height of the beams of the interlocking structure, measured in number of layers. Less layers is stronger, but more prone to defects." msgstr "Elkarblokeatzeko egituraren habeen altuera, geruza kopurutan neurtuta. Geruza gutxiago sendoagoa da, baina akatsetarako joera handiagoa du." msgid "Interlocking depth" msgstr "Elkarblokeatze-sakonera" msgid "The distance from the boundary between filaments to generate interlocking structure, measured in cells. Too few cells will result in poor adhesion." msgstr "Elkarblokeatzeko egitura sortzeko filamentuen arteko mugatik dagoen distantzia, gelaxkatan neurtuta. Gelaxka gutxiegi izateak itsaspen eskasa eragingo du." msgid "Interlocking boundary avoidance" msgstr "Elkarblokeatze-mugaren saihestea" msgid "The distance from the outside of a model where interlocking structures will not be generated, measured in cells." msgstr "Modelo baten kanpoaldetik elkarblokeatzeko egiturak sortuko ez diren distantzia, gelaxkatan neurtuta." msgid "Ironing type" msgstr "Lisatze mota" msgid "Ironing uses a small flow to print at the same height of a surface to make flat surfaces smoother. This setting controls which layers are being ironed." msgstr "Lisatzeak fluxu txikia erabiltzen du gainazal baten altuera berean berriro inprimatzerakoan, gainazal laua leunago egiteko. Ezarpen honek zein geruza lisatuko den kontrolatzen du." msgid "No ironing" msgstr "Lisatzerik ez" msgid "All top surfaces" msgstr "Goiko gainazal guztiak" msgid "Topmost surface only" msgstr "Goikoeneko gainazala bakarrik" msgid "All solid layers" msgstr "Geruza solido guztiak" # AI Translated msgid "Ironing Pattern" msgstr "Lisatze-patroia" # AI Translated msgid "The pattern that will be used when ironing." msgstr "Lisatzean erabiliko den patroia." msgid "This is the amount of material to be extruded during ironing. It is relative to the flow of normal layer height. Too high a value will result in overextrusion on the surface." msgstr "Hau da lisatzean estruitu beharreko material kopurua. Geruza-altuera normalaren fluxuarekiko erlatiboa da. Balio handiegiek gainazalean gainestrusioa eragiten dute." msgid "This is the distance between the lines used for ironing." msgstr "Hau da lisatze-lerroen arteko distantzia." msgid "The distance to keep from the edges. A value of 0 sets this to half of the nozzle diameter." msgstr "Ertzetatik mantendu beharreko distantzia. 0 balioak pitaren diametroaren erdian ezartzen du." msgid "This is the print speed for ironing lines." msgstr "Hau da lisatze-lerroen inprimatze-abiadura." msgid "Ironing angle offset" msgstr "Lisatze-angeluaren desplazamendua" msgid "The angle of ironing lines offset from the top surface." msgstr "Desplazatutako lisatze-lerroen angelua goiko gainazalarekiko." msgid "Fixed ironing angle" msgstr "Lisatze-angelu finkoa" msgid "Use a fixed absolute angle for ironing." msgstr "Erabili angelu absolutu finkoa lisatzeko." msgid "Ironing expansion" msgstr "Lisatzearen hedapena" msgid "Expand or contract the ironing area." msgstr "Zabaldu edo uzkurtu lisatze-eremua." msgid "Z contouring enabled" msgstr "Z sestratzea gaituta" msgid "Enable Z-layer contouring (aka Z-layer anti-aliasing)." msgstr "Gaitu Z geruzen sestratzea (Z geruzen antialiasing-a ere deitua)." msgid "Minimize wall height angle" msgstr "Murriztu hormaren altuera-angelua" msgid "" "Reduce the height of top-surface perimeters to match the model edge height.\n" "Affects perimeters with a slope less than this angle (degrees).\n" "A reasonable value is 35. Set to 0 to disable." msgstr "" "Murriztu goiko gainazaleko perimetroen altuera modeloaren ertzaren altuerarekin bat etor dadin.\n" "Angelu hau baino malda txikiagoa duten perimetroei eragiten die (graduetan).\n" "35 balio arrazoizkoa da. Ezarri 0 desgaitzeko." msgid "Don't alternate fill direction" msgstr "Ez txandakatu betetze-norabidea" msgid "Disable alternating fill direction when using Z contouring." msgstr "Desgaitu betegarriaren norabidea txandakatzea Z sestratzea erabiltzean." msgid "Minimum Z height" msgstr "Z altuera minimoa" msgid "" "Minimum Z-layer height.\n" "Also controls the slicing plane." msgstr "" "Z geruzaren gutxieneko altuera.\n" "Xerratze-planoa ere kontrolatzen du." msgid "This G-code is inserted at every layer change after the Z lift." msgstr "G-code hau geruza-aldaketa guztietan txertatzen da, Z altxatu ondoren." msgid "Clumping detection G-code" msgstr "Pilaketa-detekziorako G-kodea" msgid "Silent Mode" msgstr "Modu isila" msgid "Whether the machine supports silent mode in which machine uses lower acceleration to print more quietly" msgstr "Makinak modu isila onartzen duen; modu horretan makinak azelerazio txikiagoa erabiltzen du inprimatzeko" msgid "Emit limits to G-code" msgstr "Bidali mugak G-codera" msgid "Machine limits" msgstr "Makinaren mugak" msgid "" "If enabled, the machine limits will be emitted to G-code file.\n" "This option will be ignored if the G-code flavor is set to Klipper." msgstr "" "Gaituta badago, makinaren mugak G-code fitxategira bidaliko dira.\n" "Aukera hau ez da kontuan hartuko G-code zaporea Klipper gisa ezarrita badago." msgid "This G-code will be used as a code for the pause print. Users can insert pause G-code in the G-code viewer." msgstr "G-code hau inprimatzea pausatzeko kode gisa erabiliko da. Erabiltzaileek pausa G-codea txerta dezakete G-code ikustailean." msgid "This G-code will be used as a custom code." msgstr "G-code hau kode pertsonalizatu gisa erabiliko da." msgid "Small area flow compensation (beta)" msgstr "Eremu txikien fluxu-konpentsazioa (beta)" msgid "Enable flow compensation for small infill areas." msgstr "Gaitu fluxu-konpentsazioa betegarri-eremu txikietarako." msgid "Flow Compensation Model" msgstr "Fluxu-konpentsazioaren modeloa" msgid "Flow Compensation Model, used to adjust the flow for small infill areas. The model is expressed as a comma separated pair of values for extrusion length and flow correction factor. Each pair is on a separate line, followed by a semicolon, in the following format: \"1.234, 5.678;\"" msgstr "Fluxu-konpentsazioaren modeloa, betegarri-eremu txikietarako fluxua doitzeko erabiltzen dena. Modeloa estrusio-luzeraren eta fluxu-zuzenketa faktoreen balio-pare gisa adierazten da, komaz bereizita eta lerro bakoitzeko bat, formatu honetan: \"1.234,5.678\"" msgid "Maximum speed X" msgstr "X gehieneko abiadura" msgid "Maximum speed Y" msgstr "Y gehieneko abiadura" msgid "Maximum speed Z" msgstr "Z gehieneko abiadura" msgid "Maximum speed E" msgstr "E gehieneko abiadura" msgid "Maximum X speed" msgstr "X gehieneko abiadura" msgid "Maximum Y speed" msgstr "Y gehieneko abiadura" msgid "Maximum Z speed" msgstr "Z gehieneko abiadura" msgid "Maximum E speed" msgstr "E gehieneko abiadura" msgid "Maximum acceleration X" msgstr "X gehieneko azelerazioa" msgid "Maximum acceleration Y" msgstr "Y gehieneko azelerazioa" msgid "Maximum acceleration Z" msgstr "Z gehieneko azelerazioa" msgid "Maximum acceleration E" msgstr "E gehieneko azelerazioa" msgid "Maximum acceleration of the X axis" msgstr "X ardatzaren gehieneko azelerazioa" msgid "Maximum acceleration of the Y axis" msgstr "Y ardatzaren gehieneko azelerazioa" msgid "Maximum acceleration of the Z axis" msgstr "Z ardatzaren gehieneko azelerazioa" msgid "Maximum acceleration of the E axis" msgstr "E ardatzaren gehieneko azelerazioa" msgid "Maximum jerk X" msgstr "X gehieneko jerk-a" msgid "Maximum jerk Y" msgstr "Y gehieneko jerk-a" msgid "Maximum jerk Z" msgstr "Z gehieneko jerk-a" msgid "Maximum jerk E" msgstr "E gehieneko jerk-a" msgid "Maximum jerk of the X axis" msgstr "X ardatzaren gehieneko jerk-a" msgid "Maximum jerk of the Y axis" msgstr "Y ardatzaren gehieneko jerk-a" msgid "Maximum jerk of the Z axis" msgstr "Z ardatzaren gehieneko jerk-a" msgid "Maximum jerk of the E axis" msgstr "E ardatzaren gehieneko jerk-a" msgid "Maximum Junction Deviation" msgstr "Lotura-desbideratze maximoa" msgid "" "Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin Firmware\n" "If your Marlin 2 printer uses Classic Jerk set this value to 0.)" msgstr "" "Lotura-desbideratze maximoa (M205 J; Marlin firmwarean JD > 0 bada soilik aplikatzen da.\n" "Marlin 2 inprimagailuak Jerk klasikoa erabiltzen badu, ezarri balio hau 0)." msgid "Minimum speed for extruding" msgstr "Estruitzeko gutxieneko abiadura" msgid "Minimum speed for extruding (M205 S)" msgstr "Estruitzeko gutxieneko abiadura (M205 S)" msgid "Minimum travel speed" msgstr "Mugimendurako gutxieneko abiadura" msgid "Minimum travel speed (M205 T)" msgstr "Mugimendurako gutxieneko abiadura (M205 T)" msgid "Maximum force of the Y axis" msgstr "Y ardatzaren gehieneko indarra" msgid "The allowed maximum output force of Y axis" msgstr "Y ardatzaren gehieneko irteera-indar baimendua" msgid "N" msgstr "N" msgid "Bed mass of the Y axis" msgstr "Y ardatzeko ohearen masa" msgid "The machine bed mass load of Y axis" msgstr "Y ardatzeko makinaren oheak jasaten duen masa-karga" msgid "g" msgstr "g" msgid "The allowed max printed mass" msgstr "Inprimatutako masa baimenduaren gehienekoa" msgid "The allowed max printed mass on a plate" msgstr "Plaka batean inprimatutako masa baimenduaren gehienekoa" msgid "Maximum acceleration for extruding" msgstr "Estruitzeko gehieneko azelerazioa" msgid "Maximum acceleration for extruding (M204 P)" msgstr "Estruitzeko gehieneko azelerazioa (M204 P)" msgid "Maximum acceleration for retracting" msgstr "Atzera egiteko gehieneko azelerazioa" msgid "Maximum acceleration for retracting (M204 R)" msgstr "Atzera egiteko gehieneko azelerazioa (M204 R)" msgid "Maximum acceleration for travel" msgstr "Mugimendurako gehieneko azelerazioa" msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2." msgstr "Mugimendurako gehieneko azelerazioa (M204 T); Marlin 2n bakarrik aplikatzen da." msgid "Resonance avoidance" msgstr "Erresonantzia saihestea" msgid "" "By reducing the speed of the outer wall to avoid the resonance zone of the printer, ringing on the surface of the model are avoided.\n" "Please turn this option off when testing ringing." msgstr "" "Kanpoko hormaren abiadura murriztuta, inprimagailuaren erresonantzia-eremua saihesten da eta modeloaren gainazaleko uhin-markak ekiditen dira.\n" "Desaktibatu aukera hau uhin-markak probatzean." msgid "Min" msgstr "Min" msgid "Minimum speed of resonance avoidance." msgstr "Erresonantzia saihesteko gutxieneko abiadura." msgid "Max" msgstr "Max" msgid "Maximum speed of resonance avoidance." msgstr "Erresonantzia saihesteko gehieneko abiadura." msgid "Emit input shaping" msgstr "Sortu sarrera-moldaketaren aginduak" msgid "" "Override firmware input shaping settings.\n" "If disabled, firmware settings are used." msgstr "" "Gainidatzi firmwarearen sarrera-moldaketaren ezarpenak.\n" "Desgaituta badago, firmwarearen ezarpenak erabiliko dira." msgid "Input shaper type" msgstr "Input shaper mota" msgid "" "Choose the input shaper algorithm.\n" "Default uses the firmware default settings.\n" "Disable turns off input shaping in the firmware." msgstr "" "Aukeratu input shaper-aren algoritmoa.\n" "Lehenetsia aukerak firmwarearen ezarpen lehenetsiak erabiltzen ditu.\n" "Desgaitu aukerak firmwareko sarrera-moldaketa itzaltzen du." msgid "MZV" msgstr "MZV" msgid "ZV" msgstr "ZV" msgid "ZVD" msgstr "ZVD" msgid "ZVDD" msgstr "ZVDD" msgid "ZVDDD" msgstr "ZVDDD" msgid "EI" msgstr "EI" msgid "EI2" msgstr "EI2" msgid "2HUMP_EI" msgstr "2HUMP_EI" msgid "EI3" msgstr "EI3" msgid "3HUMP_EI" msgstr "3HUMP_EI" msgid "DAA" msgstr "DAA" msgid "X" msgstr "X" msgid "" "Resonant frequency for the X axis input shaper.\n" "Zero will use the firmware frequency.\n" "To disable input shaping, use the Disable type.\n" "RRF: X and Y values are equal." msgstr "" "X ardatzeko input shaper-aren erresonantzia-maiztasuna.\n" "Zero balioak firmwarearen maiztasuna erabiliko du.\n" "Sarrera-moldaketa desgaitzeko, erabili Desgaitu mota.\n" "RRF: X eta Y balioak berdinak dira." msgid "Hz" msgstr "Hz" msgid "Y" msgstr "Y" msgid "" "Resonant frequency for the Y axis input shaper.\n" "Zero will use the firmware frequency.\n" "To disable input shaping, use the Disable type." msgstr "" "Y ardatzeko input shaper-aren erresonantzia-maiztasuna.\n" "Zero balioak firmwarearen maiztasuna erabiliko du.\n" "Sarrera-moldaketa desgaitzeko, erabili Desgaitu mota." msgid "" "Damping ratio for the X axis input shaper.\n" "Zero will use the firmware damping ratio.\n" "To disable input shaping, use the Disable type.\n" "RRF: X and Y values are equal." msgstr "" "X ardatzeko input shaper-aren moteltze-erlazioa.\n" "Zero balioak firmwarearen moteltze-erlazioa erabiliko du.\n" "Sarrera-moldaketa desgaitzeko, erabili Desgaitu mota.\n" "RRF: X eta Y balioak berdinak dira." msgid "" "Damping ratio for the Y axis input shaper.\n" "Zero will use the firmware damping ratio.\n" "To disable input shaping, use the Disable type." msgstr "" "Y ardatzeko input shaper-aren moteltze-erlazioa.\n" "Zero balioak firmwarearen moteltze-erlazioa erabiliko du.\n" "Sarrera-moldaketa desgaitzeko, erabili Desgaitu mota." msgid "The part cooling fan speed may be increased when auto cooling is enabled. This is the maximum speed for the part cooling fan." msgstr "Piezaren hozte-haizagailuaren abiadura handitu daiteke hozte automatikoa gaituta dagoenean. Hau da piezaren hozte-haizagailuaren gehieneko abiadura." msgid "The highest printable layer height for the extruder. Used to limit the maximum layer height when enable adaptive layer height." msgstr "Estrusorearentzat inprimatzeko moduko geruza-altuera handiena. Geruza-altuera maximoa mugatzeko erabiltzen da, geruza-altuera egokigarria gaituta dagoenean." msgid "Extrusion rate smoothing" msgstr "Estrusio-tasaren leuntzea" msgid "" "This parameter smooths out sudden extrusion rate changes that happen when the printer transitions from printing a high flow (high speed/larger width) extrusion to a lower flow (lower speed/smaller width) extrusion and vice versa.\n" "\n" "It defines the maximum rate by which the extruded volumetric flow in mm³/s can change over time. Higher values mean higher extrusion rate changes are allowed, resulting in faster speed transitions.\n" "\n" "A value of 0 disables the feature.\n" "\n" "For a high speed, high flow direct drive printer (like the Bambu lab or Voron) this value is usually not needed. However it can provide some marginal benefit in certain cases where feature speeds vary greatly. For example, when there are aggressive slowdowns due to overhangs. In these cases a high value of around 300-350 mm³/s² is recommended as this allows for just enough smoothing to assist pressure advance achieve a smoother flow transition.\n" "\n" "For slower printers without pressure advance, the value should be set much lower. A value of 10-15 mm³/s² is a good starting point for direct drive extruders and 5-10 mm³/s² for Bowden style.\n" "\n" "This feature is known as Pressure Equalizer in Prusa slicer.\n" "\n" "Note: this parameter disables arc fitting." msgstr "" "Parametro honek inprimagailuak fluxu handiko (abiadura handiko/zabalera handiagoa) estrusio batetik fluxu txikiagoko (abiadura txikiagoa/zabalera txikiagoa) estrusio batera eta alderantziz aldatzen duenean gertatzen diren estrusio-tasa aldaketa bortitzak leuntzen ditu.\n" "\n" "Estrusio-fluxu bolumetrikoa denboran zehar alda daitekeen gehienezko tasa definitzen du, mm³/s-tan. Balio altuagoek esan nahi dute estrusio-tasa aldaketa handiagoak onartzen direla, eta horrek abiadura-trantsizio azkarragoak eragiten ditu.\n" "\n" "0 balioak funtzioa desgaitzen du.\n" "\n" "Abiadura handiko eta fluxu handiko trakzioko zuzeneko inprimagailu baterako (Bambu lab edo Voron bezalakoak), balio hau normalean ez da beharrezkoa. Hala ere, abantaila marjinal batzuk eman ditzake funtzioen abiadurak asko aldatzen diren kasu batzuetan. Adibidez, irtenguneengatik moteltze bortitzak daudenean. Kasu hauetan, 300-350 mm³/s² inguruko balio altua gomendatzen da, horrek presio-aurrerapenak fluxu-trantsizio leunagoa lortzen laguntzeko nahikoa leuntzea ahalbidetzen baitu.\n" "\n" "Presio-aurrerapenik gabeko inprimagailu motelagoetarako, balioa askoz txikiagoa ezarri behar da. 10-15 mm³/s²-ko balioa abiapuntu ona da trakzio zuzeneko estrusoreetarako eta 5-10 mm³/s² Bowden estilokoetarako.\n" "\n" "Funtzio hau Presio Berdintzailea bezala ezagutzen da Prusa slicer-ean.\n" "\n" "Oharra: parametro honek arkuaren egokitzapena desgaitzen du." msgid "mm³/s²" msgstr "mm³/s²" msgid "Smoothing segment length" msgstr "Leuntze-segmentuaren luzera" msgid "" "A lower value results in smoother extrusion rate transitions. However, this results in a significantly larger G-code file and more instructions for the printer to process.\n" "\n" "Default value of 3 works well for most cases. If your printer is stuttering, increase this value to reduce the number of adjustments made.\n" "\n" "Allowed values: 0.5-5" msgstr "" "Balio txikiagoak estrusio-tasaren trantsizio leunagoak ematen ditu. Hala ere, G-code fitxategia askoz handiagoa izango da eta inprimagailuak prozesatu beharreko instrukzio gehiago izango ditu.\n" "\n" "3 balio lehenetsiak ondo funtzionatzen du kasu gehienetan. Zure inprimagailua trabatzen bada, handitu balio hau doikuntza kopurua murrizteko.\n" "\n" "Onartutako balioak: 0,5-5" msgid "Apply only on external features" msgstr "Aplikatu kanpoko ezaugarriei soilik" msgid "Applies extrusion rate smoothing only on external perimeters and overhangs. This can help reduce artefacts due to sharp speed transitions on externally visible overhangs without impacting the print speed of features that will not be visible to the user." msgstr "Estrusio-tasaren leuntzea kanpoko perimetroetan eta irtenguneetan soilik aplikatzen du. Horrek kanpotik ikusgai dauden irtenguneetan abiadura-trantsizio zorrotzek eragindako artefaktuak murrizten lagun dezake, erabiltzaileak ikusiko ez dituen ezaugarrien inprimatze-abiaduran eraginik izan gabe." msgid "Minimum speed for part cooling fan." msgstr "Piezaren hozte-haizagailuaren gutxieneko abiadura." msgid "" "Speed of auxiliary part cooling fan. Auxiliary fan will run at this speed during printing except the first several layers which is defined by no cooling layers.\n" "Please enable auxiliary_fan in printer settings to use this feature. G-code command: M106 P2 S(0-255)" msgstr "" "Piezaren hozte-haizagailu lagungarriaren abiadura. Haizagailu lagungarria abiadura honetan ibiliko da inprimatzean, hozterik gabeko geruzek definitutako lehen geruzetan izan ezik.\n" "Gaitu auxiliary_fan inprimagailuaren ezarpenetan ezaugarri hau erabiltzeko. G-code komandoa: M106 P2 S(0-255)" msgid "For the first" msgstr "Lehenengo geruzarako" msgid "Set special auxiliary cooling fan for the first certain layers." msgstr "Ezarri hozteko haizagailu osagarri berezia lehen geruza jakin batzuetarako." msgid "" "Auxiliary fan speed will be ramped up linearly from layer \"For the first\" to maximum at layer \"Full fan speed at layer\".\n" "\"Full fan speed at layer\" will be ignored if lower than \"For the first\", in which case the fan will run at maximum allowed speed at layer \"For the first\" + 1." msgstr "" "Haizagailuaren abiadura linealki handituko da \"Lehenengo geruzarako\" geruzatik \"Haizagailuaren abiadura osoa geruzan\" geruzako maximora.\n" "\"Haizagailuaren abiadura osoa geruzan\" ez da kontuan hartuko \"Lehenengo geruzarako\" baino txikiagoa bada. Kasu horretan, haizagailua baimendutako gehieneko abiaduran ibiliko da \"Lehenengo geruzarako\" + 1 geruzan." msgid "Special auxiliary cooling fan speed, effective only for the first x layers." msgstr "Hozteko haizagailu osagarri bereziaren abiadura; lehen x geruzetan bakarrik da eraginkorra." msgid "The lowest printable layer height for the extruder. Used to limit the minimum layer height when enable adaptive layer height." msgstr "Estrusorearen inprima daitekeen geruza-altuera txikiena. Geruza-altuera minimoa mugatzeko erabiltzen da geruza-altuera egokigarria gaituta dagoenean." msgid "Min print speed" msgstr "Gutxieneko inprimatze-abiadura" msgid "The minimum print speed to which the printer slows down to maintain the minimum layer time defined above when the slowdown for better layer cooling is enabled." msgstr "Geruza hobeto hozteko moteltzea gaituta dagoenean, goian definitutako gutxieneko geruza-denbora mantentzeko inprimagailuak hartzen duen gutxieneko inprimatze-abiadura." msgid "The diameter of nozzle." msgstr "Pitaren diametroa." msgid "Configuration notes" msgstr "Konfigurazio-oharrak" msgid "You can put here your personal notes. This text will be added to the G-code header comments." msgstr "Hemen zure ohar pertsonalak jar ditzakezu. Testu hau G-code goiburuko iruzkinetan gehituko da." msgid "Host Type" msgstr "Ostalari mota" msgid "Orca Slicer can upload G-code files to a printer host. This field must contain the kind of the host." msgstr "OrcaSlicerrek G-code fitxategiak inprimagailu-ostalari batera igo ditzake. Eremu honek ostalari mota eduki behar du." msgid "Nozzle volume" msgstr "Pitaren bolumena" msgid "Volume of nozzle between the filament cutter and the end of the nozzle" msgstr "Filamentu-ebakitzailearen eta pitaren amaieraren arteko pitaren bolumena" msgid "Cooling tube position" msgstr "Hozte-hodiaren posizioa" msgid "Distance of the center-point of the cooling tube from the extruder tip." msgstr "Hozte-hodiaren erdigunetik estrusorearen puntarainoko distantzia." msgid "Cooling tube length" msgstr "Hozte-hodiaren luzera" msgid "Length of the cooling tube to limit space for cooling moves inside it." msgstr "Hozte-hodiaren luzera, barruko hozte-mugimenduen espazioa mugatzeko." msgid "High extruder current on filament swap" msgstr "Estrusorearen korronte handia filamentua aldatzean" msgid "It may be beneficial to increase the extruder motor current during the filament exchange sequence to allow for rapid ramming feed rates and to overcome resistance when loading a filament with an ugly shaped tip." msgstr "Onuragarria izan daiteke estrusorearen motorraren korrontea handitzea filamentua aldatzeko sekuentzian, muturraren moldaketa azkarrak ahalbidetzeko eta mutur itsusia duen filamentua kargatzean sortzen den erresistentzia gainditzeko." msgid "Filament parking position" msgstr "Filamentua aparkatzeko posizioa" msgid "Distance of the extruder tip from the position where the filament is parked when unloaded. This should match the value in printer firmware." msgstr "Estrusorearen puntatik filamentua deskargatzean aparkatuta geratzen den posiziorainoko distantzia. Inprimagailuaren firmwareko balioarekin bat etorri behar du." msgid "Extra loading distance" msgstr "Karga-distantzia gehigarria" msgid "When set to zero, the distance the filament is moved from parking position during load is exactly the same as it was moved back during unload. When positive, it is loaded further, if negative, the loading move is shorter than unloading." msgstr "Zero ezarrita, kargatzean filamentua aparkatze-posiziotik mugitzen dendistantzia deskargatzean atzera mugitutakoaren berdina da. Positiboa bada,gehiago kargatzen da; negatiboa bada, karga-mugimendua deskargatzekoa bainolaburragoa da." msgid "Start end points" msgstr "Hasierako eta amaierako puntuak" msgid "The start and end points which are from the cutter area to the excess chute." msgstr "Mozteko eremutik hondakin-ontzira doazen hasierako eta amaierako puntuak." msgid "Reduce infill retraction" msgstr "Murriztu betegarriaren atzera-egitea" msgid "Don't retract when the travel is entirely within an infill area. That means the oozing can't been seen. This can reduce times of retraction for complex model and save printing time, but make slicing and G-code generating slower. Note that z-hop is also not performed in areas where retraction is skipped." msgstr "Ez egin atzera-egiterik mugimendua guztiz betegarriaren eremuan dagoenean. Horrek esan nahi du jarioa ez dela ikusiko. Honek modelo konplexuetan atzera-egite kopurua murriztu eta inprimatze-denbora aurreztu dezake, baina xerraketa eta G-codearen sorrera motelduko ditu. Kontuan izan z-hop mugimendua ez dela egiten atzera-egitea saihesten den eremuetan." msgid "This option will drop the temperature of the inactive extruders to prevent oozing." msgstr "Aukera honek aktibo ez dauden estrusoreen tenperatura jaitsiko du, jarioa saihesteko." msgid "Filename format" msgstr "Fitxategi-izenaren formatua" msgid "Users can decide project file names when exporting." msgstr "Erabiltzaileek proiektu-fitxategiaren izena erabaki dezakete esportatzean." msgid "Make overhangs printable" msgstr "Egin irtenguneen inprimaketa posible" msgid "Modify the geometry to print overhangs without support material." msgstr "Aldatu geometria irtenguneak euskarri-materialik gabe inprimatzeko." msgid "Make overhangs printable - Maximum angle" msgstr "Egin irtenguneen inprimaketa posible - Gehieneko angelua" msgid "Maximum angle of overhangs to allow after making more steep overhangs printable.90° will not change the model at all and allow any overhang, while 0 will replace all overhangs with conical material." msgstr "Irtengune malkartsuagoen inprimaketa posible egin ondoren baimenduko den gehieneko angelua. 90° ezarrita modeloa ez da aldatuko eta edozein irtengune baimenduko da; 0 ezarrita, irtengune guztiak material konikoarekin ordeztuko dira." msgid "Make overhangs printable - Hole area" msgstr "Egin irtenguneen inprimaketa posible - Zulo-eremua" msgid "Maximum area of a hole in the base of the model before it's filled by conical material. A value of 0 will fill all the holes in the model base." msgstr "Modeloren oinarrian dagoen zulo baten gehieneko azalera, material konikoarekin bete aurretik. 0 balioak modeloaren oinarriko zulo guztiak beteko ditu." msgid "Detect overhang walls" msgstr "Detektatu irtengune-hormak" #, c-format, boost-format msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used." msgstr "Honek irtenguneen ehunekoa detektatzen du lerro-zabalerarekiko eta abiadura desberdina erabiltzen du. 100%%-eko irtengunean zubi-abiadura erabiltzen da." msgid "Outer walls" msgstr "Kanpoko hormak" msgid "" "Filament to print outer walls.\n" "\"Default\" uses the active object/part filament." msgstr "" "Kanpoko hormak inprimatzeko filamentua.\n" "\"Lehenetsia\" aukerak objektuaren edo piezaren filamentu aktiboa erabiltzen du." msgid "Inner walls" msgstr "Barruko hormak" msgid "" "Filament to print inner walls.\n" "\"Default\" uses the active object/part filament." msgstr "" "Barruko hormak inprimatzeko filamentua.\n" "\"Lehenetsia\" aukerak objektuaren edo piezaren filamentu aktiboa erabiltzen du." msgid "Line width of inner wall. If expressed as a %, it will be computed over the nozzle diameter." msgstr "Barruko hormaren lerro-zabalera. % gisa adierazten bada, pitaren diametroaren arabera kalkulatuko da." msgid "This is the speed for inner walls." msgstr "Hau da barruko hormen abiadura." msgid "This is the number of walls per layer." msgstr "Hau da geruza bakoitzeko horma kopurua." msgid "Alternate extra wall" msgstr "Horma gehigarriak txandakatu" msgid "" "This setting adds an extra wall to every other layer. This way the infill gets wedged vertically between the walls, resulting in stronger prints.\n" "\n" "When this option is enabled, the ensure vertical shell thickness option needs to be disabled.\n" "\n" "Using lightning infill together with this option is not recommended as there is limited infill to anchor the extra perimeters to." msgstr "" "Ezarpen honek horma gehigarri bat gehitzen dio geruza bakoitzari. Horrela, betegarria hormen artean bertikalki finkatzen da, eta, ondorioz, pieza sendoagoak lortzen dira.\n" "\n" "Aukera hau aktibatuta dagoenean, desaktibatu egin behar da \"Bermatu oskolaren lodiera bertikala\" aukera.\n" "\n" "Aukera honekin batera tximista-betegarria erabiltzea ez da gomendagarria, izan ere, betegarri-kantitate mugatu bat baitago perimetro gehigarriak ainguratzeko." msgid "If you want to process the output G-code through custom scripts, just list their absolute paths here. Separate multiple scripts with a semicolon. Scripts will be passed the absolute path to the G-code file as the first argument, and they can access the Orca Slicer config settings by reading environment variables." msgstr "Irteerako G-codea script pertsonalizatuen bidez prozesatu nahi baduzu, zerrendatu hemen haien bide absolutuak. Bereizi script bat baino gehiago puntu eta komaz. Script-ek G-code fitxategiaren bide absolutua jasoko dute lehen argumentu gisa, eta OrcaSlicerren konfigurazio-ezarpenetara sar daitezke ingurune-aldagaiak irakurrita." msgid "Change extrusion role G-code (process)" msgstr "Estrusio-funtzioa aldatzeko G-codea (prozesua)" msgid "This G-code is inserted when the extrusion role is changed. It runs after the machine and filament extrusion role G-code." msgstr "G-code hau estrusio-funtzioa aldatzean txertatzen da. Makinaren eta filamentuen estrusio-funtzioaren G-codearen ondoren exekutatzen da." msgid "Plugins Used" msgstr "Erabilitako pluginak" msgid "Plugin capabilities referenced by this preset, stored as name;uuid;capability." msgstr "Aurrezarpen honek erreferentziatutako plugin-gaitasunak; izena;uuid;gaitasuna formatuan gordeta." msgid "Python plugin(s) invoked at each slicing pipeline step to read and modify intermediate slicing data, including a final G-code post-processing step. Research/experimental." msgstr "Xerratze-prozesuko urrats bakoitzean deitzen diren Python pluginak, tarteko datuak irakurri eta aldatzeko; horien artean, G-codearen azken post-prozesatze fasea ere sartzen da. Ikerketa- edo esperimentazio-mailakoak." msgid "Printer type" msgstr "Inprimagailu mota" msgid "Type of the printer." msgstr "Inprimagailu mota." msgid "Printer notes" msgstr "Inprimagailuaren oharrak" msgid "You can put your notes regarding the printer here." msgstr "Hemen jar ditzakezu inprimagailuari buruzko oharrak." msgid "Printer variant" msgstr "Inprimagailuaren aldaera" msgid "Raft contact Z distance" msgstr "Baltsaren kontaktuaren Z distantzia" msgid "Z gap between raft and object. If Support Top Z Distance is 0, this value is ignored and the object is printed in direct contact with the raft (no gap)." msgstr "Baltsaren eta objektuaren arteko Z tartea. Euskarriaren goiko Z distantzia 0 bada, balio hau ez da kontuan hartzen eta objektua baltsarekin zuzeneko kontaktuan inprimatzen da (tarterik gabe)." msgid "Raft expansion" msgstr "Baltsaren hedapena" msgid "This expands all raft layers in XY plane." msgstr "Honek baltsa-geruza guztiak XY planoan zabaltzen ditu." msgid "First layer density" msgstr "Lehen geruzaren dentsitatea" msgid "This is the density of the first raft or support layer." msgstr "Hau da lehen baltsa- edo euskarri-geruzaren dentsitatea." msgid "First layer expansion" msgstr "Lehen geruzaren hedapena" msgid "This expands the first raft or support layer to improve bed adhesion." msgstr "Honek lehen baltsa- edo euskarri-geruza zabaltzen du ohearekiko itsaspena hobetzeko." msgid "Raft layers" msgstr "Baltsa-geruzak" msgid "Object will be raised by this number of support layers. Use this function to avoid warping when printing ABS." msgstr "Objektua euskarri-geruza kopuru horren arabera altxatuko da. Erabili funtziohau ABS inprimatzean deformazioa saihesteko." msgid "The G-code path is generated after simplifying the contour of models to avoid too many points and G-code lines. Smaller values mean higher resolution and more time required to slice." msgstr "G-codearen bidea modeloen sestra sinplifikatu ondoren sortzen da, puntu eta G-code lerro gehiegi saihesteko. Balio txikiagoek bereizmen handiagoa eta xerratzeko denbora luzeagoa esan nahi dute." msgid "Travel distance threshold" msgstr "Mugimendu-distantziaren atalasea" msgid "Only trigger retraction when the travel distance is longer than this threshold." msgstr "Aktibatu atzera-egitea mugimendu-distantzia atalase hau baino handiagoa denean bakarrik." msgid "Retract amount before wipe" msgstr "Garbitu aurreko atzera-egite kantitatea" msgid "This is the length of fast retraction before a wipe, relative to retraction length." msgstr "Hau da garbitu aurreko atzera-egite azkarraren luzera, atzera-egitearen luzerarekiko." msgid "Retract amount after wipe" msgstr "Garbitu ondorengo atzera-egite kantitatea" #, no-c-format, no-boost-format msgid "" "The length of fast retraction after wipe, relative to retraction length.\n" "The value will be clamped by 100% minus the retract amount before the wipe value." msgstr "" "Garbiketa-mugimenduaren ondorengo atzera-egite azkarraren luzera, atzera-egitearen luzerari dagokionez.\n" "Balioa mugatu egingo da: gehienez, ehuneko ehun ken garbiketa aurreko atzera-egite balioa izango da." msgid "Retract on layer change" msgstr "Atzera egin geruza aldatzean" msgid "This forces a retraction on layer changes." msgstr "Honek geruza-aldaketetan atzera-egitea behartzen du." msgid "Retraction Length" msgstr "Atzera-egitearen luzera" msgid "Some amount of material in extruder is pulled back to avoid ooze during long travel. Set zero to disable retraction." msgstr "Estrusoreko material pixka bat atzera tiratzen da mugimendu luzeetan jarioa saihesteko. Ezarri zero atzera-egitea desgaitzeko." msgid "Long retraction when cut (beta)" msgstr "Atzera-egite luzea ebakitzean (beta)" msgid "Experimental feature: Retracting and cutting off the filament at a longer distance during changes to minimize purge. While this reduces flush significantly, it may also raise the risk of nozzle clogs or other printing problems." msgstr "Ezaugarri esperimentala: aldaketetan filamentua distantzia luzeagoan atzera eraman eta ebakitzen du, purga minimizatzeko. Horrek purga nabarmen murrizten duen arren, pitaren buxadura edo bestelako inprimatze-arazoen arriskua ere handitu dezake." msgid "Retraction distance when cut" msgstr "Ebakitzean atzera-egite distantzia" msgid "Experimental feature: Retraction length before cutting off during filament change." msgstr "Ezaugarri esperimentala: filamentua aldatzean atzera-egite luzera filamentua ebaki aurretik." msgid "Long retraction when extruder change" msgstr "Atzera-egite luzea estrusorea aldatzean" msgid "Retraction distance when extruder change" msgstr "Atzera-egite distantzia estrusorea aldatzean" msgid "Z-hop height" msgstr "Z jauziaren altuera" msgid "Whenever there is a retraction, the nozzle is lifted a little to create clearance between the nozzle and the print. This prevents the nozzle from hitting the print when traveling more. Using spiral lines to lift z can prevent stringing." msgstr "Atzera-egite bakoitzean pita apur bat altxatzen da pitaren eta inprimaketaren artean tartea sortzeko. Horrela, mugimenduetan pitak pieza jotzea saihesten da. Z altxatzeko espiral-lerroak erabiltzeak hariak sortzea murriztu dezake." msgid "Z-hop lower boundary" msgstr "Z jauziaren beheko muga" msgid "Z-hop will only come into effect when Z is above this value and is below the parameter: \"Z-hop upper boundary\"." msgstr "Z jauzia Z balio hau baino gorago eta \"Z jauziaren goiko muga\" parametroa baino beherago dagoenean bakarrik aplikatuko da." msgid "Z-hop upper boundary" msgstr "Z jauziaren goiko muga" msgid "If this value is positive, Z-hop will only come into effect when Z is above the parameter: \"Z-hop lower boundary\" and is below this value." msgstr "Balio hau positiboa bada, Z jauzia Z \"Z jauziaren beheko muga\" parametroabaino gorago eta balio hau baino beherago dagoenean bakarrik aplikatuko da." msgid "Z-hop type" msgstr "Z jauzi mota" msgid "Type of Z-hop." msgstr "Z-hop mota." msgid "Slope" msgstr "Malda" msgid "Spiral" msgstr "Espirala" msgid "Traveling angle" msgstr "Mugimendu-angelua" msgid "Traveling angle for Slope and Spiral Z-hop type. Setting it to 90° results in Normal Lift." msgstr "Malda eta Espirala motako Z jauzirako mugimendu-angelua. 90° ezarrita,altxatze normala lortzen da." msgid "Only lift Z above" msgstr "Altxatu Z honen gainetik bakarrik" msgid "If you set this to a positive value, Z lift will only take place above the specified absolute Z." msgstr "Balio positiboa ezartzen baduzu, Z altxatzea zehaztutako Z absolutuarengainetik bakarrik egingo da." msgid "Only lift Z below" msgstr "Altxatu Z honen azpitik bakarrik" msgid "If you set this to a positive value, Z lift will only take place below the specified absolute Z." msgstr "Balio positiboa ezartzen baduzu, Z altxatzea zehaztutako Z absolutuarenazpitik bakarrik egingo da." msgid "On surfaces" msgstr "Gainazaletan" msgid "Enforce Z-Hop behavior. This setting is impacted by the above settings (Only lift Z above/below)." msgstr "Behartu Z jauziaren portaera. Ezarpen honi goiko ezarpenek eragiten diote(Altxatu Z honen gainetik/azpitik bakarrik)." msgid "All Surfaces" msgstr "Gainazal guztiak" msgid "Top Only" msgstr "Goikoa bakarrik" msgid "Bottom Only" msgstr "Behekoa bakarrik" msgid "Top and Bottom" msgstr "Goikoa eta behekoa" msgid "Direct Drive" msgstr "Trakzio zuzeneko transmisioa" msgid "Bowden" msgstr "Bowden" msgid "Hybrid" msgstr "Hibridoa" msgid "Enable filament dynamic map" msgstr "Gaitu filamentuen mapa dinamikoa" msgid "Enable dynamic filament mapping during print." msgstr "Gaitu filamentuen mapaketa dinamikoa inprimatzean." msgid "Has filament switcher" msgstr "Filamentu-aldagailua du" msgid "Printer has a filament switcher hardware (e.g., AMS)." msgstr "Inprimagailuak filamentua aldatzeko hardwarea du (adibidez, AMS)." msgid "Extra length on restart" msgstr "Berrabiaraztean luzera gehigarria" msgid "When the retraction is compensated after the travel move, the extruder will push this additional amount of filament. This setting is rarely needed." msgstr "Mugimenduaren ondoren atzera-egitea konpentsatzen denean, estrusoreak filamentu kantitate gehigarri hau bultzatuko du. Ezarpen hau gutxitan behar da." msgid "When the retraction is compensated after changing tool, the extruder will push this additional amount of filament." msgstr "Tresna aldatu ondoren atzera-egitea konpentsatzen denean, estrusoreak filamentu kantitate gehigarri hau bultzatuko du." msgid "Retraction speed" msgstr "Atzera-egite abiadura" msgid "Speed for retracting filament from the nozzle." msgstr "Filamentuak pitatik atzera-egiteko abiadura." msgid "Deretraction speed" msgstr "Atzera-egitea lehengoratzeko abiadura" msgid "Speed for reloading filament into the nozzle. Zero means same speed of retraction." msgstr "Filamentua pitaren barrura berriz kargatzeko abiadura. Zero balioak atzera-egitearen abiadura bera erabiltzea esan nahi du." msgid "Deretraction speed (extruder change)" msgstr "Atzera-egitea lehengoratzeko abiadura (estrusore aldaketa)" msgid "Speed for reloading filament into the nozzle when switching extruder." msgstr "Filamentua pitaren barrura berriz kargatzeko abiadura estrusorea aldatzean." msgid "Use firmware retraction" msgstr "Erabili firmwarearen atzera-egitea" msgid "This experimental setting uses G10 and G11 commands to have the firmware handle the retraction. This is only supported in recent Marlin." msgstr "Ezarpen esperimental honek G10 eta G11 komandoak erabiltzen ditu firmwareak atzera-egitea kudea dezan. Marlinen bertsio berrietan bakarrik onartzen da." msgid "Show auto-calibration marks" msgstr "Erakutsi autokalibrazio-markak" msgid "Disable set remaining print time" msgstr "Desgaitu geratzen den inprimatze-denbora ezartzea" msgid "Disable generating of the M73: Set remaining print time in the final G-code." msgstr "Desgaitu azken G-codean M73 sortzea: ezarri geratzen den inprimatze-denbora." msgid "Seam position" msgstr "Josturaren posizioa" msgid "This is the starting position for each part of the outer wall." msgstr "Hau da kanpoko hormaren zati bakoitzaren hasierako kokapena." msgid "Nearest" msgstr "Hurbilena" msgid "Aligned" msgstr "Lerrokatuta" msgid "Aligned back" msgstr "Atzean lerrokatuta" msgid "Back" msgstr "Atzean" msgid "Random" msgstr "Ausazkoa" msgid "Staggered inner seams" msgstr "Barne-jostura mailakatuak" msgid "This option causes the inner seams to be shifted backwards based on their depth, forming a zigzag pattern." msgstr "Aukera honek barne-josturak atzerantz desplazatzen ditu haien sakonerarenarabera, sigi-saga patroia sortuz." msgid "Seam gap" msgstr "Josturaren tartea" msgid "" "In order to reduce the visibility of the seam in a closed loop extrusion, the loop is interrupted and shortened by a specified amount.\n" "This amount can be specified in millimeters or as a percentage of the current extruder diameter. The default value for this parameter is 10%." msgstr "" "Begizta itxiko estrusio batean josturaren ikusgarritasuna murrizteko, begizta eten eta zehaztutako kantitate batean laburtzen da.\n" "Kantitate hau milimetrotan edo uneko estrusorearen diametroaren ehuneko gisa zehaztu daiteke. Parametro honen balio lehenetsia %10 da." msgid "Scarf joint seam (beta)" msgstr "Alaka junturako jostura (beta)" msgid "Use scarf joint to minimize seam visibility and increase seam strength." msgstr "Erabili alaka junturako josturaren ikusgarritasuna minimizatzeko etajosturaren sendotasuna handitzeko." msgid "Conditional scarf joint" msgstr "Baldintzapeko alaka-juntura" msgid "Apply scarf joints only to smooth perimeters where traditional seams do not conceal the seams at sharp corners effectively." msgstr "Aplikatu alaka junturak perimetro leunetan bakarrik, jostura tradizionalek izkina zorrotzetako josturak ondo ezkutatzen ez dituztenean." msgid "Conditional angle threshold" msgstr "Baldintzapeko angeluaren atalasea" msgid "" "This option sets the threshold angle for applying a conditional scarf joint seam.\n" "If the maximum angle within the perimeter loop exceeds this value (indicating the absence of sharp corners), a scarf joint seam will be used. The default value is 155°." msgstr "" "Aukera honek baldintzapeko alaka junturako jostura aplikatzeko angelu-atalasea ezartzen du.\n" "Perimetro-begiztaren barruko gehieneko angelua balio hau baino handiagoa bada (izkina zorrotzik ez dagoela adieraziz), juntura zeiharreko jostura erabiliko da. Balio lehenetsia 155° da." msgid "Conditional overhang threshold" msgstr "Baldintzapeko irtenguneen atalasea" #, no-c-format, no-boost-format msgid "This option determines the overhang threshold for the application of scarf joint seams. If the unsupported portion of the perimeter is less than this threshold, scarf joint seams will be applied. The default threshold is set at 40% of the external wall's width. Due to performance considerations, the degree of overhang is estimated." msgstr "Aukera honek juntura zeiharreko josturak aplikatzeko irtenguneen atalasea zehazten du. Perimetroaren euskarririk gabeko zatia atalase hau baino txikiagoa bada, juntura zeiharreko josturak aplikatuko dira. Atalase lehenetsia kanpoko hormaren zabaleraren %40 da. Errendimendu-arrazoiengatik, irtengunearen maila estimatu egiten da." msgid "Scarf joint speed" msgstr "Alaka junturako abiadura" msgid "This option sets the printing speed for scarf joints. It is recommended to print scarf joints at a slow speed (less than 100 mm/s). It's also advisable to enable 'Extrusion rate smoothing' if the set speed varies significantly from the speed of the outer or inner walls. If the speed specified here is higher than the speed of the outer or inner walls, the printer will default to the slower of the two speeds. When specified as a percentage (e.g., 80%), the speed is calculated based on the respective outer or inner wall speed. The default value is set to 100%." msgstr "Aukera honek alaka junturako inprimatze-abiadura ezartzen du. Gomendagarria da juntura zeiharrak abiadura motelean inprimatzea (100 mm/s baino gutxiago). 'Estrusio-tasaren leuntzea' gaitzea ere komeni da ezarritako abiadura kanpoko edo barruko hormen abiaduratik nabarmen aldentzen bada. Hemen zehaztutako abiadura kanpoko edo barruko hormen abiadura baino handiagoa bada, inprimagailuak bietako motelena erabiliko du. Ehuneko gisa zehazten bada (adibidez, %80), abiadura dagokion kanpoko edo barruko hormaren abiaduraren arabera kalkulatuko da. Balio lehenetsia %100 da." msgid "Scarf joint flow ratio" msgstr "Alaka junturako fluxu-erlazioa" msgid "This factor affects the amount of material for scarf joints." msgstr "Faktore honek alaka junturako material kantitateari eragiten dio." msgid "Scarf start height" msgstr "Alakaren hasierako altuera" msgid "" "Start height of the scarf.\n" "This amount can be specified in millimeters or as a percentage of the current layer height. The default value for this parameter is 0." msgstr "" "Junturaren hasierako altuera.\n" "Kantitate hau milimetrotan edo uneko geruza-altueraren ehuneko gisa zehaztu daiteke. Parametro honen balio lehenetsia 0 da." msgid "Scarf around entire wall" msgstr "Alaka horma osoan zehar" msgid "The scarf extends to the entire length of the wall." msgstr "Juntura hormaren luzera osora hedatzen da." msgid "Scarf length" msgstr "Junturaren luzera" msgid "Length of the scarf. Setting this parameter to zero effectively disables the scarf." msgstr "Junturaren luzera. Parametro hau zero ezarrita juntura desgaitzen da." msgid "Scarf steps" msgstr "Junturaren urratsak" msgid "Minimum number of segments of each scarf." msgstr "Juntura bakoitzaren gutxieneko segmentu kopurua." msgid "Scarf joint for inner walls" msgstr "Barruko hormetarako alaka juntura" msgid "Use scarf joint for inner walls as well." msgstr "Erabili alaka juntura barruko hormetan ere." msgid "Role base wipe speed" msgstr "Eginkizunaren araberako purgatze-abiadura" msgid "The wipe speed is determined by the speed of the current extrusion role. e.g. if a wipe action is executed immediately following an outer wall extrusion, the speed of the outer wall extrusion will be utilized for the wipe action." msgstr "Purgatze-abiadura uneko estrusio-eginkizunaren abiadurak zehazten du. Adibidez, purgatze-ekintza bat kanpoko hormaren estrusioaren ondoren berehala egiten bada, kanpoko hormaren estrusio-abiadura erabiliko da purgatze-ekintzarako." msgid "Wipe on loops" msgstr "Garbitu begiztetan" msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop." msgstr "Begizta itxiko estrusio batean josturaren ikusgarritasuna minimizatzeko, barruranzko mugimendu txiki bat egiten da estrusoreak begizta utzi aurretik." msgid "Wipe before external loop" msgstr "Garbitu kanpoko begizta baino lehen" msgid "" "To minimize visibility of potential overextrusion at the start of an external perimeter when printing with Outer/Inner or Inner/Outer/Inner wall print order, the de-retraction is performed slightly on the inside from the start of the external perimeter. That way any potential over extrusion is hidden from the outside surface.\n" "\n" "This is useful when printing with Outer/Inner or Inner/Outer/Inner wall print order as in these modes it is more likely an external perimeter is printed immediately after a de-retraction move." msgstr "" "Kanpoko perimetro baten hasieran egon daitekeen gainestrusioaren ikusgarritasuna minimizatzeko, Kanpoko/Barruko edo Barruko/Kanpoko/Barruko horma inprimatze ordenarekin inprimatzean, atzera-egitearen lehengoratzea kanpoko perimetroaren hasieratik apur bat barrurago egiten da. Horrela, balizko gainestrusioa kanpoko gainazaletik ezkutatuta geratzen da.\n" "\n" "Hau erabilgarria da Kanpoko/Barruko edo Barruko/Kanpoko/Barruko horma inprimatze ordenarekin inprimatzean; izan ere, modu horietan litekeena da kanpoko perimetro bat atzera-egitea lehengoratzeko mugimendu baten ondoren berehala inprimatzea." msgid "Wipe speed" msgstr "Purgatze-abiadura" msgid "The wipe speed is determined by the speed setting specified in this configuration. If the value is expressed as a percentage (e.g. 80%), it will be calculated based on the travel speed setting above. The default value for this parameter is 80%." msgstr "Purgatze-abiadura konfigurazio honetan zehaztutako abiadura-ezarpenak zehazten du. Balioa ehuneko gisa adierazten bada (adibidez, %80), goiko mugimendu-abiaduraren ezarpenaren arabera kalkulatuko da. Parametro honen balio lehenetsia %80 da." msgid "Skirt distance" msgstr "Gonaren distantzia" msgid "This is the distance from the skirt to the brim or the object." msgstr "Hau da gona eta itsaspen ertza edo objektuaren arteko distantzia." msgid "Skirt start point" msgstr "Gonaren hasiera-puntua" msgid "Angle from the object center to skirt start point. Zero is the most right position, counter clockwise is positive angle." msgstr "Objektuaren erdigunetik gonaren hasiera-punturainoko angelua. Zeroeskuineneko posizioa da; erlojuaren orratzen kontrako noranzkoa angelupositiboa da." msgid "Skirt height" msgstr "Gonaren altuera" msgid "Number of skirt layers: usually only one" msgstr "Gonaren geruza kopurua: normalean bakarra" msgid "Single loop after first layer" msgstr "Begizta bakarra lehen geruzaren ondoren" msgid "Limits the skirt/draft shield loops to one wall after the first layer. This is useful, on occasion, to conserve filament but may cause the draft shield/skirt to warp / crack." msgstr "Gonaren/haize-babesaren begiztak horma bakarrera mugatzen ditu lehen geruzaren ondoren. Batzuetan filamentua aurrezten du, baina haize-babesa edo gona deformatu edo pitzatu daiteke." msgid "Draft shield" msgstr "Aire-korronteen babeslea" msgid "" "A draft shield is useful to protect an ABS or ASA print from warping and detaching from print bed due to wind draft. It is usually needed only with open frame printers, i.e. without an enclosure.\n" "\n" "Enabled = skirt is as tall as the highest printed object. Otherwise 'Skirt height' is used.\n" "Note: With the draft shield active, the skirt will be printed at skirt distance from the object. Therefore, if brims are active it may intersect with them. To avoid this, increase the skirt distance value.\n" msgstr "" "Aire-korronteen babeslea erabilgarria da ABS edo ASA inprimaketa haize-korronteengatik deformatzetik eta inprimatze-ohetik askatzetik babesteko. Normalean egitura irekiko inprimagailuetan bakarrik behar da, hauda, itxiturarik gabe.\n" "\n" "Gaituta = gona inprimatutako objekturik altuena bezain altua da. Bestela,'Gonaren altuera' erabiltzen da.\n" "Oharra: aire-korronteen babeslea aktibo dagoenean, gona objektutik gonaren distantziara inprimatuko da. Beraz, itsaspen ertzak aktibo badaude, haiekin gurutza daiteke. Hori saihesteko, handitu gonaren distantziaren balioa.\n" msgid "Enabled" msgstr "Gaituta" msgid "Skirt type" msgstr "Gona mota" msgid "Combined - single skirt for all objects, Per object - individual object skirt." msgstr "Konbinatua - gona bakarra objektu guztientzat; Objektuko - objektu bakoitzarentzako gona." msgid "Per object" msgstr "Objektuko" msgid "Skirt loops" msgstr "Gonaren begiztak" msgid "This is the number of loops for the skirt. 0 means the skirt is disabled." msgstr "Hau da gonaren begizta kopurua. 0 balioak gona desgaitzen du." msgid "Skirt speed" msgstr "Gonaren abiadura" msgid "Speed of skirt, in mm/s. Zero means use default layer extrusion speed." msgstr "Gonaren abiadura, mm/s-tan. Zero ezarrita, geruzaren estrusio-abiadura lehenetsia erabiltzen da." msgid "Skirt minimum extrusion length" msgstr "Gonaren gutxieneko estrusio-luzera" msgid "" "Minimum filament extrusion length in mm when printing the skirt. Zero means this feature is disabled.\n" "\n" "Using a non-zero value is useful if the printer is set up to print without a prime line.\n" "Final number of loops is not taking into account while arranging or validating objects distance. Increase loop number in such case." msgstr "" "Gona inprimatzean filamentua estruitzeko gutxieneko luzera, mm-tan. Zeroezarrita, ezaugarri hau desgaituta dago.\n" "\n" "Zero ez den balio bat erabiltzea erabilgarria da inprimagailuaprimatze-lerrorik gabe inprimatzeko konfiguratuta badago.\n" "Objektuen distantzia antolatzean edo balioztatzean ez da kontuan hartzenazken begizta kopurua. Kasu horretan, handitu begizta kopurua." msgid "The printing speed in exported G-code will be slowed down when the estimated layer time is shorter than this value in order to get better cooling for these layers." msgstr "Esportatutako G-codeko inprimatze-abiadura moteldu egingo da estimatutakogeruza-denbora balio hau baino laburragoa denean, geruza horien hozte hobealortzeko." msgid "Minimum sparse infill threshold" msgstr "Dentsitate baxuko betegarriaren gutxieneko atalasea" msgid "Sparse infill areas which are smaller than this threshold value are replaced by internal solid infill." msgstr "Atalase hau baino txikiagoak diren dentsitate baxuko betegarri-eremuak barruko betegarri solidoarekin ordezkatzen dira." msgid "" "Filament to print internal solid infill.\n" "\"Default\" uses the active object/part filament." msgstr "" "Barruko betegarri solidoa inprimatzeko filamentua.\n" "\"Lehenetsia\" aukerak objektuaren edo piezaren filamentu aktiboa erabiltzen du." msgid "" "Filament to print top surface.\n" "\"Default\" uses the active object/part filament." msgstr "" "Goiko gainazala inprimatzeko filamentua.\n" "\"Lehenetsia\" aukerak objektuaren edo piezaren filamentu aktiboa erabiltzen du." msgid "" "Filament to print bottom surface.\n" "\"Default\" uses the active object/part filament." msgstr "" "Beheko gainazala inprimatzeko filamentua.\n" "\"Lehenetsia\" aukerak objektuaren edo piezaren filamentu aktiboa erabiltzen du." msgid "Line width of internal solid infill. If expressed as a %, it will be computed over the nozzle diameter." msgstr "Barruko betegarri solidoaren lerro-zabalera. % gisa adierazten bada, pitaren diametroaren arabera kalkulatuko da." msgid "This is the speed for internal solid infill, not including the top or bottom surface." msgstr "Hau da barruko betegarri solidoaren abiadura, goiko eta beheko gainazalak kanpo." msgid "This enables spiraling, which smooths out the Z moves of the outer contour and turns a solid model into a single walled print with solid bottom layers. The final generated model has no seam." msgstr "Honek espiralizazioa gaitzen du, kanpoko sestraren Z mugimenduak leunduz eta modelo solidoa horma bakarreko inprimaketa bihurtuz, beheko geruza solidoekin. Sortutako azken modeloak ez du josturarik." msgid "Smooth Spiral" msgstr "Espiral leuna" msgid "Smooth Spiral smooths out X and Y moves as well, resulting in no visible seam at all, even in the XY directions on walls that are not vertical." msgstr "Espiral leunak X eta Y mugimenduak ere leuntzen ditu; ondorioz, ez dajosturarik ikusten, ezta bertikalak ez diren hormetako XY norabideetan ere." msgid "Max XY Smoothing" msgstr "XY leuntze max." #, no-c-format, no-boost-format msgid "Maximum distance to move points in XY to try to achieve a smooth spiral. If expressed as a %, it will be computed over nozzle diameter." msgstr "Espiral leuna lortzeko puntuak XYn mugitzeko gehieneko distantzia. % gisa adierazten bada, pitaren diametroaren arabera kalkulatuko da." msgid "Spiral starting flow ratio" msgstr "Espiralaren hasierako fluxu-erlazioa" #, no-c-format, no-boost-format msgid "Sets the starting flow ratio while transitioning from the last bottom layer to the spiral. Normally the spiral transition scales the flow ratio from 0% to 100% during the first loop which can in some cases lead to under extrusion at the start of the spiral." msgstr "Azken beheko geruzatik espiralera igarotzean hasierako fluxu-erlazioaezartzen du. Normalean, espiral-trantsizioak fluxu-erlazioa %0tik %100eraeskalatzen du lehen begiztan; horrek kasu batzuetan azpiestrusioa eragindezake espiralaren hasieran." msgid "Spiral finishing flow ratio" msgstr "Espiralaren amaierako fluxu-erlazioa" #, no-c-format, no-boost-format msgid "Sets the finishing flow ratio while ending the spiral. Normally the spiral transition scales the flow ratio from 100% to 0% during the last loop which can in some cases lead to under extrusion at the end of the spiral." msgstr "Espirala amaitzean amaierako fluxu-erlazioa ezartzen du. Normalean,espiral-trantsizioak fluxu-erlazioa %100etik %0ra eskalatzen du azken begiztan; horrek kasu batzuetan azpiestrusioa eragin dezake espiralaren amaieran." msgid "If smooth or traditional mode is selected, a timelapse video will be generated for each print. After each layer is printed, a snapshot is taken with the chamber camera. All of these snapshots are composed into a timelapse video when printing completes. If smooth mode is selected, the toolhead will move to the excess chute after each layer is printed and then take a snapshot. Since the melt filament may leak from the nozzle during the process of taking a snapshot, a prime tower is required for smooth mode to wipe the nozzle." msgstr "Modu leuna edo tradizionala hautatzen bada, timelapse bideo bat sortuko da inprimaketa bakoitzerako. Geruza bakoitza inprimatu ondoren, ganberako kamerak argazki bat ateratzen du, eta amaieran guztiak bideo batean biltzen dira. Modu leunean, inprimatze-burua hondakin-kanalera mugitzen da argazkia atera aurretik. Argazkia ateratzean filamentua pitatik isuri daitekeenez, modu leunak purgatze-dorrea behar du pita garbitzeko." msgid "Traditional" msgstr "Tradizionala" msgid "Smooth" msgstr "Leuna" msgid "Farthest point timelapse" msgstr "Puntu urruneneko timelapsea" msgid "When enabled, the timelapse snapshot is taken at the farthest point from camera instead of traveling to the wipe tower or excess chute. Only effective in traditional timelapse mode on non-I3 printers." msgstr "Gaituta dagoenean, timelapseko argazkia kameratik urrunen dagoen puntuan hartzen da, purgatze-dorrera edo hondakin-kanalera joan beharrean. Timelapse modu tradizionalean eta I3 ez diren inprimagailuetan bakarrik da eraginkorra." msgid "Temperature variation" msgstr "Tenperatura-aldaketa" #. TRN PrintSettings : "Ooze prevention" > "Temperature variation" msgid "Temperature difference to be applied when an extruder is not active. The value is not used when 'idle_temperature' in filament settings is set to non-zero value." msgstr "Estrusore bat aktibo ez dagoenean aplikatu beharreko tenperatura-aldea.Balioa ez da erabiltzen filamentuaren ezarpenetan 'idle_temperature' zero ezden balio batera ezarrita dagoenean." msgid "∆℃" msgstr "∆℃" msgid "Preheat time" msgstr "Aurrez berotzeko denbora" msgid "To reduce the waiting time after tool change, Orca can preheat the next tool while the current tool is still in use. This setting specifies the time in seconds to preheat the next tool. Orca will insert a M104 command to preheat the tool in advance." msgstr "Tresna aldatu ondorengo itxaron-denbora murrizteko, Orcak hurrengo tresnaaurrez berotu dezake uneko tresna oraindik erabiltzen ari den bitartean.Ezarpen honek hurrengo tresna aurrez berotzeko denbora zehazten du,segundotan. Orcak M104 komandoa txertatuko du tresna aldez aurretikberotzeko." msgid "Preheat steps" msgstr "Aurrez berotzeko urratsak" msgid "Insert multiple preheat commands (e.g. M104.1). Only useful for Prusa XL. For other printers, please set it to 1." msgstr "Txertatu aurrez berotzeko hainbat komando (adib. M104.1). Prusa XL-rakobakarrik da erabilgarria. Beste inprimagailuetarako, ezarri 1." msgid "G-code written at the very top of the output file, before any other content. Useful for adding metadata that printer firmware reads from the first lines of the file (e.g. estimated print time, filament usage). Supports placeholders like {print_time_sec} and {used_filament_length}." msgstr "Irteerako fitxategiaren hasiera-hasieran idatzitako G-codea, beste edozein eduki baino lehen. Inprimagailuaren firmwareak fitxategiaren lehen lerroetatik irakurtzen dituen metadatuak gehitzeko erabilgarria da (adibidez, zenbatetsitako inprimatze-denbora edo filamentuen erabilera). {print_time_sec} eta {used_filament_length} moduko leku-markak onartzen ditu." msgid "Start G-code" msgstr "Hasierako G-codea" msgid "G-code added when starting a print." msgstr "Inprimaketa hastean gehitutako G-codea." msgid "G-code added when the printer starts using this filament" msgstr "Inprimagailua filamentua erabiltzen hasten denean gehitutako G-codea" msgid "Single Extruder Multi Material" msgstr "Estrusore bakarreko material anitzekoa" msgid "Use single nozzle to print multi filament." msgstr "Erabili pita bakarra hainbat filamentu inprimatzeko." msgid "Manual Filament Change" msgstr "Eskuzko filamentu-aldaketa" msgid "Enable this option to omit the custom Change filament G-code only at the beginning of the print. The tool change command (e.g., T0) will be skipped throughout the entire print. This is useful for manual multi-material printing, where we use M600/PAUSE to trigger the manual filament change action." msgstr "Gaitu aukera hau inprimaketaren hasieran bakarrik filamentua aldatzeko G-code pertsonalizatua ez erabiltzeko. Tresna aldatzeko komandoa (adib. T0) inprimaketa osoan saltatuko da. Hau erabilgarria da eskuzko material anitzeko inprimaketan, non M600/PAUSE erabiltzen dugun eskuzko filamentu-aldaketa abiarazteko." msgid "Wipe tower type" msgstr "Purgatze-dorre mota" msgid "Choose the wipe tower implementation for multi-material prints. Type 1 is recommended for Bambu and Qidi printers with a filament cutter. Type 2 offers better compatibility with multi-tool and MMU printers and provide overall better compatibility." msgstr "Aukeratu material anitzeko inprimaketetarako purgatze-dorrearen inplementazioa. 1. mota gomendatzen da filamentua ebakitzeko gailua duten Bambu eta Qidi inprimagailuetarako. 2. motak bateragarritasun hobea eskaintzen du tresna anitzeko eta MMU inprimagailuekin, eta oro har bateragarritasun hobea ematen du." msgid "Type 1" msgstr "1. mota" msgid "Type 2" msgstr "2. mota" msgid "Purge in prime tower" msgstr "Purgatu purgatze-dorrean" msgid "Purge remaining filament into prime tower." msgstr "Purgatu geratzen den filamentua purgatze-dorrean." msgid "Enable filament ramming" msgstr "Gaitu filamentuaren muturraren moldaketa" msgid "Tool change on wipe tower" msgstr "Tresna-aldaketa purgatze-dorrean" msgid "Force the toolhead to travel to the wipe tower before issuing the tool change command (Tx). Only relevant for multi-extruder (multi-toolhead) printers using a Type 2 wipe tower. By default Orca skips the travel on multi-toolhead machines because the firmware handles the head swap, which can result in the Tx command being issued above the printed part. Enable this option if you want the tool change to always be issued above the wipe tower instead." msgstr "Behartu inprimatze-burua purgatze-dorrera joatera tresna aldatzeko agindua (Tx) eman aurretik. 2. motako purgatze-dorrea erabiltzen duten estrusore anitzeko (inprimatze-buru anitzeko) inprimagailuetarako bakarrik da garrantzitsua. Lehenespenez, Orcak ez du joan-etorria egiten inprimatze-buru anitzeko makinetan, firmwareak buruaren aldaketa kudeatzen duelako; horren ondorioz, Tx agindua inprimatutako piezaren gainean eman daiteke. Gaitu aukera hau tresna-aldaketa beti purgatze-dorrearen gainean egin dadin." msgid "No sparse layers (beta)" msgstr "Geruza bakandurik ez (beta)" msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." msgstr "Gaituta badago, purgatze-dorrea ez da inprimatuko tresna-aldaketarik ez duten geruzetan. Tresna-aldaketa duten geruzetan, estrusorea beherantz mugituko da purgatze-dorrea inprimatzeko. Erabiltzailearen ardura da inprimaketarekin talkarik ez dagoela ziurtatzea." msgid "Prime all printing extruders" msgstr "Primatu inprimatzeko estrusore guztiak" msgid "If enabled, all printing extruders will be primed at the front edge of the print bed at the start of the print." msgstr "Gaituta badago, inprimatzeko estrusore guztiak inprimatze-ohearen aurrekoertzean primatuko dira inprimaketaren hasieran." msgid "Toolchange ordering" msgstr "Tresna-aldaketen ordena" msgid "" "Determines the order of tool changes on each layer.\n" "- Default: Starts with the last used extruder to minimize tool changes.\n" "- Cyclic: Uses a fixed tool sequence each layer. This sacrifices speed for better surface quality, as the extra toolchanges allow layers more time to cool." msgstr "" "Geruza bakoitzean tresnak zer ordenatan aldatzen diren zehazten du.\n" "- Lehenetsia: azken erabilitako estrusorearekin hasten da, tresna-aldaketak gutxitzeko.\n" "- Ziklikoa: geruza bakoitzean tresnen sekuentzia finko bat erabiltzen du. Abiadura sakrifikatzen du gainazalaren kalitate hobea lortzeko, tresna-aldaketa gehigarriek geruzei hozteko denbora gehiago ematen dietelako." msgid "Cyclic" msgstr "Ziklikoa" msgid "Slice gap closing radius" msgstr "Xerraketan tartea ixteko erradioa" msgid "Cracks smaller than 2x gap closing radius are being filled during the triangle mesh slicing. The gap closing operation may reduce the final print resolution, therefore it is advisable to keep the value reasonably low." msgstr "Tartea ixteko erradioaren bikoitza baino txikiagoak diren pitzadurak bete egiten dira triangelu-sarearen xerraketan. Tartea ixteko eragiketak azken inprimaketaren bereizmena murriztu dezake; beraz, gomendagarria da balioa nahiko baxu mantentzea." msgid "Slicing Mode" msgstr "Xerratze-modua" msgid "Other" msgstr "Bestelakoak" msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model." msgstr "Erabili \"Bikoiti-bakoiti\" 3DLabPrint hegazkin-modeloetarako. Erabili \"Itxi zuloak\" modeloko zulo guztiak ixteko." msgid "Regular" msgstr "Arrunta" msgid "Even-odd" msgstr "Bikoiti-bakoiti" msgid "Close holes" msgstr "Itxi zuloak" msgid "Z offset" msgstr "Z desplazamendua" msgid "This value will be added (or subtracted) from all the Z coordinates in the output G-code. It is used to compensate for bad Z endstop position: for example, if your endstop zero actually leaves the nozzle 0.3mm far from the print bed, set this to -0.3 (or fix your endstop)." msgstr "Balio hau irteerako G-codeko Z koordenatu guztiei gehituko zaie (edo kenduko zaie). Z amaiera-etengailuaren posizio txarra konpentsatzeko erabiltzen da: adibidez, zure amaiera-etengailuaren zeroak pita inprimatze-ohetik 0,3 mm-ra uzten badu, ezarri -0.3 (edo konpondu amaiera-etengailua)." msgid "Enable support" msgstr "Gaitu euskarria" msgid "This enables support generation." msgstr "Honek euskarriak sortzea gaitzen du." msgid "Normal (auto) and Tree (auto) are used to generate support automatically. If Normal (manual) or Tree (manual) is selected, only support enforcers are generated." msgstr "Normala (auto) eta Zuhaitza (auto) euskarriak automatikoki sortzeko erabiltzen dira. Normala (eskuz) edo Zuhaitza (eskuz) hautatzen bada, euskarri-behartzaileak bakarrik sortzen dira." msgid "Normal (auto)" msgstr "Normala (auto)" msgid "Tree (auto)" msgstr "Zuhaitza (auto)" msgid "Normal (manual)" msgstr "Normala (eskuz)" msgid "Tree (manual)" msgstr "Zuhaitza (eskuz)" msgid "Support/object XY distance" msgstr "Euskarriaren eta objektuaren arteko XY distantzia" msgid "This controls the XY separation between an object and its support." msgstr "Honek objektuaren eta euskarriaren arteko XY bereizketa kontrolatzen du." msgid "Support/object first layer gap" msgstr "Euskarriaren/objektuaren lehen geruzako tartea" msgid "XY separation between an object and its support at the first layer." msgstr "Objektu baten eta haren euskarriaren arteko XY bereizketa lehen geruzan." # AI Translated msgid "Pattern angle" msgstr "Patroiaren angelua" msgid "Use this setting to rotate the support pattern on the horizontal plane." msgstr "Erabili ezarpen hau euskarri-patroia plano horizontalean biratzeko." msgid "On build plate only" msgstr "Inprimatze-plakan bakarrik" msgid "This setting only generates supports that begin on the build plate." msgstr "Ezarpen honek inprimatze-plakan hasten diren euskarriak soilik sortzen ditu." msgid "Support critical regions only" msgstr "Eutsi eskualde kritikoei bakarrik" msgid "Only create support for critical regions including sharp tail, cantilever, etc." msgstr "Sortu euskarria eskualde kritikoetarako bakarrik, hala nola buztan zorrotza, irtenguneak eta abar." msgid "Ignore small overhangs" msgstr "Ezikusi irtengune txikiak" msgid "Ignore small overhangs that possibly don't require support." msgstr "Ezikusi euskarririk behar ez duten irtengune txikiak." msgid "Top Z distance" msgstr "Goiko Z distantzia" msgid "Z gap between the support's top and object." msgstr "Euskarriaren goialdearen eta objektuaren arteko Z tartea." msgid "Bottom Z distance" msgstr "Beheko Z distantzia" msgid "Z gap between the object and the support bottom. If Support Top Z Distance is 0 and the bottom has interface layers, this value is ignored and the support is printed in direct contact with the object (no gap)." msgstr "Objektuaren eta euskarriaren behealdearen arteko Z tartea. Euskarriaren goiko Z distantzia 0 bada eta behealdeak interfaze-geruzak baditu, balio hau ez da kontuan hartzen eta euskarria objektuarekin zuzeneko kontaktuan inprimatzen da (tarterik gabe)." msgid "Support/raft base" msgstr "Euskarriaren/baltsaren oinarria" msgid "" "Filament to print support base and raft.\n" "\"Default\" means no specific filament for support and current filament is used." msgstr "" "Euskarriaren oinarria eta baltsa inprimatzeko filamentua.\n" "\"Lehenetsia\" aukerak ez du filamenturik zehazten eta uneko filamentua erabiltzen du." msgid "Avoid interface filament for base" msgstr "Saihestu interfazearen filamentua oinarrian" msgid "Avoid using support interface filament to print support base if possible." msgstr "Saihestu euskarri-interfazearen filamentua erabiltzea euskarriaren oinarria inprimatzeko, ahal bada." msgid "Line width of support. If expressed as a %, it will be computed over the nozzle diameter." msgstr "Euskarriaren lerro-zabalera. % gisa adierazten bada, pitaren diametroaren arabera kalkulatuko da." # AI Translated msgid "Loop pattern interface" msgstr "Begizta-patroiko interfazea" msgid "This covers the top contact layer of the supports with loops. It is disabled by default." msgstr "Honek euskarrien goiko kontaktu-geruza begiztekin estaltzen du. Lehenespenez desgaituta dago." msgid "Support/raft interface" msgstr "Euskarriaren/baltsaren interfazea" msgid "" "Filament to print support interface.\n" "\"Default\" means no specific filament for support interface and current filament is used." msgstr "" "Euskarri-interfazea inprimatzeko filamentua.\n" "\"Lehenetsia\" aukerak ez du filamenturik zehazten eta uneko filamentua erabiltzen du." msgid "Top interface layers" msgstr "Goiko interfaze-geruzak" msgid "This is the number of top interface layers." msgstr "Hau da goiko interfaze-geruzen kopurua." msgid "Bottom interface layers" msgstr "Beheko interfaze-geruzak" msgid "Number of bottom interface layers." msgstr "Beheko interfaze-geruza kopurua." msgid "Same as top" msgstr "Goikoaren berdina" msgid "Top interface spacing" msgstr "Goiko interfazearen tartea" msgid "" "Spacing of interface lines. Zero means solid interface.\n" "Force using solid interface when support ironing is enabled." msgstr "" "Interfaze-lerroen arteko tartea. Zero balioak interfaze solidoa esan nahi du.\n" "Euskarriaren lisatzea gaituta dagoenean, interfaze solidoa behartzen da." msgid "Bottom interface spacing" msgstr "Beheko interfazearen tartea" msgid "This is the spacing of bottom interface lines. 0 means solid interface." msgstr "Hau da beheko interfaze-lerroen arteko tartea. 0 balioak interfaze solidoa esan nahi du." msgid "This is the speed for support interfaces." msgstr "Hau da euskarri-interfazeen abiadura." # AI Translated msgid "Base pattern" msgstr "Oinarri-patroia" # AI Translated msgid "" "Line pattern of support.\n" "\n" "The Default option for Tree supports is Hollow, which means no base pattern. For other support types, the Default option is the Rectilinear pattern.\n" "\n" "NOTE: For Organic supports, the two walls are supported only with the Hollow/Default base pattern. The Lightning base pattern is supported only by Tree Slim/Strong/Hybrid supports. For the other support types, the Rectilinear will be used instead of Lightning." msgstr "" "Euskarriaren lerro-patroia.\n" "\n" "Zuhaitz-euskarrien aukera lehenetsia Hutsa da, hau da, ez dago oinarri-patroirik. Beste euskarri motetarako, aukera lehenetsia patroi zuzenekoa da.\n" "\n" "OHARRA: Euskarri organikoetan, bi hormak Hutsa/Lehenetsia oinarri-patroiarekin bakarrik onartzen dira. Tximistetan oinarritutako patroia Zuhaitz mehea/Indartsua/Hibridoa euskarriek bakarrik onartzen dute. Beste euskarri motetarako, Zuzenekoa erabiliko da Tximistenaren ordez." msgid "Rectilinear grid" msgstr "Sare lerrozuzena" msgid "Hollow" msgstr "Hutsa" # AI Translated msgid "Interface pattern" msgstr "Interfaze-patroia" # AI Translated msgid "This is the line pattern for support interfaces. The default pattern for non-soluble support interfaces is Rectilinear while the default pattern for soluble support interfaces is Concentric." msgstr "Hau da euskarri-interfazeen lerro-patroia. Euskarri-interfaze ez-disolbagarrietarako patroi lehenetsia Lerrozuzena da; disolbagarrietarako, Kontzentrikoa." msgid "Rectilinear Interlaced" msgstr "Lerrozuzena tartekatua" # AI Translated msgid "Base pattern spacing" msgstr "Oinarri-patroiaren tartea" msgid "This determines the spacing between support lines." msgstr "Honek euskarri-lerroen arteko tartea zehazten du." msgid "Normal support expansion" msgstr "Euskarri arruntaren hedapena" msgid "Expand (+) or shrink (-) the horizontal span of normal support." msgstr "Hedatu (+) edo txikitu (-) euskarri normalaren hedadura horizontala." msgid "This is the speed for support." msgstr "Hau da euskarriaren abiadura." msgid "" "Style and shape of the support. For normal support, projecting the supports into a regular grid will create more stable supports (default), while snug support towers will save material and reduce object scarring.\n" "For tree support, slim and organic style will merge branches more aggressively and save a lot of material (default organic), while hybrid style will create similar structure to normal support under large flat overhangs." msgstr "" "Euskarriaren estiloa eta forma. Euskarri normaletan, euskarriak sare erregular batera proiektatzeak euskarri egonkorragoak sortuko ditu (lehenetsia); euskarri doituaren dorreek, berriz, materiala aurreztu eta objektuko markak murriztuko dituzte.\n" "Zuhaitz-euskarrian, estilo meheak eta organikoak adarrak modu oldarkorragoan bateratuko ditu eta material asko aurreztuko du (organikoa lehenetsia); estilo hibridoak, berriz, euskarri normalaren antzeko egitura sortuko du irtengune lau handien azpian." msgid "Default (Grid/Organic)" msgstr "Lehenetsia (Sarea/Organikoa)" msgid "Snug" msgstr "Doitua" msgid "Organic" msgstr "Organikoa" msgid "Tree Slim" msgstr "Zuhaitz mehea" msgid "Tree Strong" msgstr "Zuhaitz sendoa" msgid "Tree Hybrid" msgstr "Zuhaitz hibridoa" msgid "Independent support layer height" msgstr "Euskarrien geruza-altuera independentea" msgid "Support layer uses layer height independent with object layer. This is to support customizing Z-gap and save print time. This option will be invalid when the prime tower is enabled." msgstr "Euskarri-geruzak objektuaren geruzarekiko independentea den geruza-altuera erabiltzen du. Z tartea pertsonalizatzeko eta inprimatze-denbora aurrezteko da. Aukera hau baliogabea izango da purgatze-dorrea gaituta badago." msgid "Threshold angle" msgstr "Atalase-angelua" msgid "" "Support will be generated for overhangs whose slope angle is below the threshold. The smaller this value is, the steeper the overhang that can be printed without support.\n" "Note: If set to 0, normal supports use the Threshold overlap instead, while tree supports fall back to a default value of 30." msgstr "" "Euskarriak sortuko dira malda-angelua atalasearen azpitik duten irtenguneetan. Balioa zenbat eta txikiagoa izan, orduan eta irtengune malkartsuagoa inprima daiteke euskarririk gabe.\n" "Oharra: 0 ezartzen bada, euskarri arruntek gainjartze-atalasea erabiltzen dute; zuhaitz-euskarriek 30eko balio lehenetsia." msgid "Threshold overlap" msgstr "Atalase-gainjartzea" msgid "If threshold angle is zero, support will be generated for overhangs whose overlap is below the threshold. The smaller this value is, the steeper the overhang that can be printed without support." msgstr "Atalase-angelua zero bada, euskarria sortuko da gainjartzea atalasearen azpitik duten irtenguneetarako. Balio hau zenbat eta txikiagoa izan, orduan eta irtengune malkartsuagoa inprima daiteke euskarririk gabe." msgid "Tree support branch angle" msgstr "Zuhaitz-euskarriaren adar-angelua" msgid "This setting determines the maximum overhang angle that the branches of tree support are allowed to make. If the angle is increased, the branches can be printed more horizontally, allowing them to reach farther." msgstr "Ezarpen honek zuhaitz-euskarriaren adarrek izan dezaketen gehieneko irtengune-angelua zehazten du. Angelua handituz gero, adarrak horizontalago inprima daitezke, eta urrunago irits daitezke." msgid "Preferred Branch Angle" msgstr "Adar-angelu hobetsia" #. TRN PrintSettings: "Organic supports" > "Preferred Branch Angle" msgid "The preferred angle of the branches, when they do not have to avoid the model. Use a lower angle to make them more vertical and more stable. Use a higher angle for branches to merge faster." msgstr "Adarren angelu hobetsia, modeloa saihestu behar ez dutenean. Erabili angelu txikiagoa adarrak bertikalagoak eta egonkorragoak izateko. Erabili angelu handiagoa adarrak azkarrago elkartzeko." msgid "Tree support branch distance" msgstr "Zuhaitz-euskarriaren adarren distantzia" msgid "This setting determines the distance between neighboring tree support nodes." msgstr "Ezarpen honek zuhaitz-euskarriaren ondoko nodoen arteko distantzia zehazten du." msgid "Branch Density" msgstr "Adar-dentsitatea" #. TRN PrintSettings: "Organic supports" > "Branch Density" msgid "Adjusts the density of the support structure used to generate the tips of the branches. A higher value results in better overhangs but the supports are harder to remove, thus it is recommended to enable top support interfaces instead of a high branch density value if dense interfaces are needed." msgstr "Adarren puntak sortzeko erabiltzen den euskarri-egituraren dentsitatea doitzen du. Balio handiagoak irtengune hobeak ematen ditu, baina euskarriak kentzea zailagoa da; beraz, interfaze trinkoak behar badira, gomendagarria da goiko euskarri-interfazeak gaitzea adar-dentsitate handia erabili beharrean." msgid "Auto brim width" msgstr "Itsaspen ertz automatikoaren zabalera" msgid "Enabling this option means the width of the brim for tree support will be automatically calculated." msgstr "Aukera hau gaituz gero, zuhaitz-euskarriaren itsaspen ertzaren zabalera automatikoki kalkulatuko da." msgid "Tree support brim width" msgstr "Zuhaitz-euskarriaren itsaspen ertzaren zabalera" msgid "Distance from tree branch to the outermost brim line." msgstr "Zuhaitz-adarretik itsaspen ertzaren kanpokoeneko lerrora dagoen distantzia." msgid "Tip Diameter" msgstr "Puntaren diametroa" #. TRN PrintSettings: "Organic supports" > "Tip Diameter" msgid "Branch tip diameter for organic supports." msgstr "Euskarri organikoen adar-puntaren diametroa." msgid "Tree support branch diameter" msgstr "Zuhaitz-euskarriaren adar-diametroa" msgid "This setting determines the initial diameter of support nodes." msgstr "Ezarpen honek euskarri-nodoen hasierako diametroa zehazten du." #. TRN PrintSettings: #lmFIXME msgid "Branch Diameter Angle" msgstr "Adar-diametroaren angelua" #. TRN PrintSettings: "Organic supports" > "Branch Diameter Angle" msgid "The angle of the branches' diameter as they gradually become thicker towards the bottom. An angle of 0 will cause the branches to have uniform thickness over their length. A bit of an angle can increase stability of the organic support." msgstr "Adarren diametroaren angelua, beherantz loditzen diren heinean. 0 angeluaezarrita, adarrek lodiera uniformea izango dute luzera osoan. Angelutxobatek euskarri organikoaren egonkortasuna handitu dezake." msgid "Support wall loops" msgstr "Euskarri-hormaren begiztak" msgid "This setting specifies the count of support walls in the range of [0,2]. 0 means auto." msgstr "Ezarpen honek euskarri-hormen kopurua zehazten du [0,2] tartean. 0 balioakautomatikoa esan nahi du." msgid "Tree support with infill" msgstr "Zuhaitz-euskarria betegarriarekin" msgid "This setting specifies whether to add infill inside large hollows of tree support." msgstr "Ezarpen honek zuhaitz-euskarriaren barrunbe handien barruan betegarria gehitu behar den zehazten du." msgid "Ironing Support Interface" msgstr "Lisatu euskarri-interfazea" msgid "Ironing is using small flow to print on same height of support interface again to make it more smooth. This setting controls whether support interface being ironed. When enabled, support interface will be extruded as solid too." msgstr "Lisatzeak fluxu txikia erabiltzen du euskarri-interfazearen altuera berean berriz inprimatzeko eta gainazala leunago uzteko. Ezarpen honek interfazea lisatuko den kontrolatzen du. Gaituta dagoenean, interfazea solido gisa ere estruituko da." # AI Translated msgid "Support Ironing Pattern" msgstr "Euskarriaren lisatze-patroia" msgid "Support Ironing flow" msgstr "Euskarriaren lisatze-fluxua" msgid "The amount of material to extrude during ironing. Relative to flow of normal support interface layer height. Too high value results in overextrusion on the surface." msgstr "Lisatzean estruitu beharreko material-kantitatea, euskarri-interfaze arruntaren geruza-altueraren fluxuarekiko. Balio handiegiek gainestrusioa eragiten dute." msgid "Support Ironing line spacing" msgstr "Euskarriaren lisatze-lerroen tartea" msgid "Activate temperature control" msgstr "Aktibatu tenperatura-kontrola" msgid "" "Enable this option for automated chamber temperature control. This option activates the emitting of an M191 command before the \"machine_start_gcode\"\n" " which sets the chamber temperature and waits until it is reached. In addition, it emits an M141 command at the end of the print to turn off the chamber heater, if present.\n" "\n" "This option relies on the firmware supporting the M191 and M141 commands either via macros or natively and is usually used when an active chamber heater is installed." msgstr "" "Gaitu aukera hau ganberako tenperatura automatikoki kontrolatzeko. Aukera honek M191 komandoa igortzea aktibatzen du \"machine_start_gcode\" baino lehen;\n" "komando horrek ganberako tenperatura ezartzen du eta lortu arte itxaroten du. Gainera, inprimaketaren amaieran M141 komandoa igortzen du ganberaren berogailua itzaltzeko, halakorik badago.\n" "\n" "Aukera honek firmwareak M191 eta M141 komandoak onartzea eskatzen du, makroen bidez edo jatorriz, eta normalean ganberaren berogailu aktiboa instalatuta dagoenean erabiltzen da." msgid "" "For high-temperature materials like ABS, ASA, PC, and PA, a higher chamber temperature can help suppress or reduce warping and potentially lead to higher interlayer bonding strength. However, at the same time, a higher chamber temperature will reduce the efficiency of air filtration for ABS and ASA.\n" "\n" "For PLA, PETG, TPU, PVA, and other low-temperature materials, this option should be disabled (set to 0) as the chamber temperature should be low to avoid extruder clogging caused by material softening at the heat break.\n" "\n" "If enabled, this parameter also sets a G-code variable named chamber_temperature, which can be used to pass the desired chamber temperature to your print start macro, or a heat soak macro like this: PRINT_START (other variables) CHAMBER_TEMP=[chamber_temperature]. This may be useful if your printer does not support M141/M191 commands, or if you desire to handle heat soaking in the print start macro if no active chamber heater is installed." msgstr "" "ABS, ASA, PC eta PA bezalako tenperatura altuko materialetan, ganberako tenperatura handiagoak deformazioa murrizten edo saihesten lagun dezake, eta geruzen arteko lotura sendoagoa eman dezake. Hala ere, aldi berean, ganberako tenperatura handiagoak ABS eta ASA materialetarako aire-iragazketaren eraginkortasuna murriztuko du.\n" "\n" "PLA, PETG, TPU, PVA eta tenperatura baxuko beste material batzuetarako,aukera hau desgaituta egon behar da (0 ezarrita), ganberako tenperatura baxua izan behar baita heat break-ean materiala biguntzeagatik estrusoreabuxatu ez dadin.\n" "\n" "Gaituta badago, parametro honek chamber_temperature izeneko G-code aldagai bat ere ezartzen du. Aldagai hori erabil daiteke nahi den ganberako tenperatura inprimaketa hasteko makroari pasatzeko, edo bero-berdinketarako makro bati, adibidez: PRINT_START (beste aldagai batzuk) CHAMBER_TEMP=[chamber_temperature]. Hau erabilgarria izan daiteke zure inprimagailuak M141/M191 komandoak onartzen ez baditu, edo ganberaren berogailu aktiborik ez dagoenean bero-berdinketa inprimaketa hasteko makroan kudeatu nahi baduzu." msgid "" "This is the chamber temperature at which printing should start, while the chamber continues heating toward the \"Target\" chamber temperature. For example, set the Target to 60 and the Minimal to 50 to begin printing once the chamber reaches 50℃, without waiting for the full 60℃.\n" "\n" "It sets a G-code variable named chamber_minimal_temperature, which can be passed to your print start macro or a heat soak macro, like this: PRINT_START (other variables) CHAMBER_MIN_TEMP=[chamber_minimal_temperature].\n" "\n" "Unlike the \"Target\" chamber temperature, this option does not emit any M141/M191 commands; it only exposes the value to your custom G-code. It should not exceed the \"Target\" chamber temperature." msgstr "" "Inprimaketa zer ganberako tenperaturatan hasi behar den zehazten du, ganbera \"Helburua\" tenperaturarantz berotzen jarraitzen duen bitartean. Adibidez, ezarri Helburua 60 eta Gutxienekoa 50; horrela, inprimaketa ganbera 50 ℃-ra iristean hasiko da, 60 ℃ osoetara iritsi arte itxaron gabe.\n" "\n" "chamber_minimal_temperature izeneko G-code aldagai bat ezartzen du, inprimaketa hasteko makrora edo beroan mantentzeko makrora pasa daitekeena, honela: PRINT_START (beste aldagai batzuk) CHAMBER_MIN_TEMP=[chamber_minimal_temperature].\n" "\n" "\"Helburua\" ganberako tenperaturak ez bezala, aukera honek ez du M141/M191 agindurik sortzen; balioa zure G-code pertsonalizatuaren eskura jartzen du soilik. Ez luke \"Helburua\" ganberako tenperatura gainditu behar." msgid "Chamber minimal temperature" msgstr "Ganberako gutxieneko tenperatura" msgid "Nozzle temperature after the first layer" msgstr "Pitaren tenperatura lehen geruzaren ondoren" msgid "Detect thin walls" msgstr "Detektatu horma meheak" msgid "This detects thin walls which can’t contain two lines and uses a single line to print. It may not print as well because it’s not a closed loop." msgstr "Honek bi lerro kabitzen ez diren horma meheak detektatu eta lerro bakarrarekin inprimatzen ditu. Baliteke kalitatea txikiagoa izatea, begizta itxia ez delako." msgid "This G-code is inserted when filament is changed, including T commands to trigger tool change." msgstr "G-code hau filamentua aldatzean txertatzen da, tresna-aldaketa abiarazteko Tkomandoak barne." msgid "This G-code is inserted when the extrusion role is changed." msgstr "G-code hau estrusio-funtzioa aldatzen denean txertatzen da." msgid "Change extrusion role G-code (filament)" msgstr "Estrusio-funtzioa aldatzeko G-codea (filamentua)" msgid "This G-code is inserted when the extrusion role is changed for the active filament." msgstr "G-code hau filamentua aktibo dagoenean estrusio-funtzioa aldatzean txertatzen da." msgid "Line width for top surfaces. If expressed as a %, it will be computed over the nozzle diameter." msgstr "Goiko gainazaletarako lerro-zabalera. Ehuneko gisa adierazten bada, pitaren diametroaren arabera kalkulatuko da." msgid "This is the speed for solid top surface infill." msgstr "Hau da goiko gainazal solidoaren betegarri-abiadura." msgid "Top shell layers" msgstr "Goiko oskolaren geruzak" msgid "This is the number of solid layers of top shell, including the top surface layer. When the thickness calculated by this value is thinner than the top shell thickness, the top shell layers will be increased" msgstr "Hau da goiko oskolaren geruza solidoen kopurua, goiko gainazala barne. Balio honekin kalkulatutako lodiera goiko oskolaren lodiera baino txikiagoa bada, geruza kopurua handituko da" msgid "Top shell thickness" msgstr "Goiko oskolaren lodiera" msgid "The number of top solid layers is increased when slicing if the thickness calculated by top shell layers is thinner than this value. This can avoid having too thin a shell when layer height is small. 0 means that this setting is disabled and thickness of top shell is determined simply by the number of top shell layers." msgstr "Xerratzean goiko geruza solidoen kopurua handitzen da goiko oskol-geruzek kalkulatutako lodiera balio hau baino txikiagoa bada. Horrela oskola meheegia izatea saihesten da geruza-altuera txikia denean. 0 balioak ezarpena desgaitzen du." msgid "Separated infills" msgstr "Betegarri bereiziak" # AI Translated msgid "" "Centers the internal infill of each part on itself, as if it were sliced on its own, instead of on the whole assembly. Parts that touch or overlap are treated as one body and share a center; separate parts (or distinct 3D objects) each get their own.\n" "Useful when an assembly groups several objects that should each keep a consistent, self-centered infill.\n" "Affects line and grid patterns and rotation-template infills.\n" "Patterns locked to global coordinates (Gyroid, Honeycomb, TPMS, ...) are unaffected." msgstr "" "Pieza bakoitzaren barruko betegarria bere buruarekiko zentratzen du, bereiz xerratuko balitz bezala, muntaketa osoarekiko zentratu beharrean. Elkar ukitzen edo gainjartzen diren piezak gorputz bakartzat hartzen dira eta zentro bera partekatzen dute; bereizitako pieza bakoitzak (edo 3D objektu bakoitzak) bere zentroa izango du.\n" "Erabilgarria da muntaketa batek betegarri koherente eta autozentratua mantendu behar duten hainbat objektu biltzen dituenean.\n" "Lerro eta sareta patroiei eta biraketa-txantiloia duten betegarriei eragiten die.\n" "Koordenatu globaletara lotutako patroiei (Giroidea, Abaraska, TPMS...) ez die eragiten." # AI Translated msgid "Center surface pattern on" msgstr "Zentratu gainazal-patroia honetan" # AI Translated msgid "" "Chooses where the centering point of centered top/bottom surface patterns (Archimedean Chords, Octagram Spiral) is placed.\n" " - Each Surface: centers the pattern on every individual surface region, so each island is symmetric on its own.\n" " - Each Model: centers the pattern on each connected body. Parts that touch or overlap share one center; parts detached from the rest each get their own.\n" " - Each Assembly: uses a single shared center for the whole object or assembly." msgstr "" "Goiko eta beheko gainazaleko patroi zentratuen (Arkimedesen kordak, Oktagrama-espirala) zentroa non kokatzen den aukeratzen du.\n" " - Gainazal bakoitza: patroia gainazal-eskualde bakoitzean zentratzen du, uharte bakoitza bere kabuz simetrikoa izan dadin.\n" " - Modelo bakoitza: patroia konektatutako gorputz bakoitzean zentratzen du. Elkar ukitzen edo gainjartzen diren piezek zentro bera partekatzen dute; gainerakoetatik bereizitako piezek beren zentroa dute.\n" " - Muntaketa bakoitza: zentro partekatu bakarra erabiltzen du objektu edo muntaketa osorako." msgid "Each Surface" msgstr "Gainazal bakoitza" msgid "Each Model" msgstr "Modelo bakoitza" msgid "Each Assembly" msgstr "Muntaketa bakoitza" msgid "This is the speed at which traveling is done." msgstr "Hau da mugimenduetarako abiadura." msgid "Wipe while retracting" msgstr "Garbitu atzera-egitean" msgid "This moves the nozzle along the last extrusion path when retracting to clean any leaked material on the nozzle. This can minimize blobs when printing a new part after traveling." msgstr "Honek pita azken estrusio-bidean zehar mugitzen du atzera-egitean, pitatik isuritako materiala garbitzeko. Horrek pikorrak murriztu ditzake pieza berri bat inprimatzean." msgid "Wipe distance" msgstr "Garbitze-distantzia" msgid "" "Describe how long the nozzle will move along the last path when retracting.\n" "\n" "Depending on how long the wipe operation lasts, how fast and long the extruder/filament retraction settings are, a retraction move may be needed to retract the remaining filament.\n" "\n" "Setting a value in the retract amount before wipe setting below will perform any excess retraction before the wipe, else it will be performed after." msgstr "" "Atzera egitean pitak azken bidean zehar zenbat mugituko den zehazten du.\n" "\n" "Purgatze-eragiketak zenbat irauten duen eta estrusorearen/filamentuaren atzera-egite ezarpenak zein azkar eta luzeak diren kontuan hartuta, baliteke atzera-egite mugimendu bat behar izatea geratzen den filamentua atzera eramateko.\n" "\n" "Beheko garbitu aurreko atzera-egite kantitatearen ezarpenean balio batezarriz gero, gehiegizko atzera-egitea garbiketa baino lehen egingo da; bestela, ondoren egingo da." msgid "The wiping tower can be used to clean up residue on the nozzle and stabilize the chamber pressure inside the nozzle in order to avoid appearance defects when printing objects." msgstr "Purgatze-dorrea pitaren hondarrak garbitzeko eta pitaren barruko ganbera-presioa egonkortzeko erabil daiteke, objektuetan itxura-akatsak saihesteko." msgid "Internal ribs" msgstr "Barruko saihetsak" msgid "Enable internal ribs to increase the stability of the prime tower." msgstr "Gaitu barruko nerbioak purgatze-dorrearen egonkortasuna handitzeko." msgid "Purging volumes" msgstr "Purga-bolumenak" msgid "Flush multiplier" msgstr "Purgatze-biderkatzailea" msgid "The actual flushing volumes is equal to the flush multiplier value multiplied by the flushing volumes in the table." msgstr "Benetako purgatze-bolumena purgatze-biderkatzailea taulako bolumenekin biderkatuta lortzen da." msgid "Flush multiplier (Fast mode)" msgstr "Purgatze-biderkatzailea (modu azkarra)" msgid "The flush multiplier used in fast purge mode." msgstr "Purgatze azkarreko moduan erabiltzen den purgatze-biderkatzailea." msgid "Prime volume" msgstr "Primatze-bolumena" msgid "This is the volume of material to prime the extruder with on the tower." msgstr "Dorrean estrusorea prestatzeko behar den material-bolumena." msgid "Prime volume mode" msgstr "Prestaketa-bolumenaren modua" msgid "Selects how the wipe-tower prime and flush volumes are computed on multi-extruder printers." msgstr "Estrusore anitzeko inprimagailuetan purgatze-dorrearen primatze- eta purgatze-bolumenak nola kalkulatzen diren hautatzen du." msgid "Saving" msgstr "Aurrezpena" msgid "Fast" msgstr "Azkarra" msgid "This is the width of prime towers." msgstr "Hau da purgatze-dorreen zabalera." msgid "Wipe tower rotation angle" msgstr "Purgatze-dorrearen biraketa-angelua" msgid "Wipe tower rotation angle with respect to X axis." msgstr "Purgatze-dorrearen biraketa-angelua X ardatzarekiko." msgid "Brim width of prime tower, negative number means auto calculated width based on the height of prime tower." msgstr "Purgatze-dorrearen itsaspen ertzaren zabalera; zenbaki negatiboak purgatze-dorrearen altueraren arabera automatikoki kalkulatutako zabalera adierazten du." msgid "Stabilization cone apex angle" msgstr "Egonkortze-konoaren erpin-angelua" msgid "Angle at the apex of the cone that is used to stabilize the wipe tower. Larger angle means wider base." msgstr "Purgatze-dorrea egonkortzeko erabiltzen den konoaren erpineko angelua. Angelu handiagoak oinarri zabalagoa esan nahi du." msgid "Maximum wipe tower print speed" msgstr "Purgatze-dorrearen gehieneko inprimatze-abiadura" msgid "" "The maximum print speed when purging in the wipe tower and printing the wipe tower sparse layers. When purging, if the sparse infill speed or calculated speed from the filament max volumetric speed is lower, the lowest will be used instead.\n" "\n" "When printing the sparse layers, if the internal perimeter speed or calculated speed from the filament max volumetric speed is lower, the lowest will be used instead.\n" "\n" "Increasing this speed may affect the tower's stability as well as increase the force with which the nozzle collides with any blobs that may have formed on the wipe tower.\n" "\n" "Before increasing this parameter beyond the default of 90 mm/s, make sure your printer can reliably bridge at the increased speeds and that ooze when tool changing is well controlled.\n" "\n" "For the wipe tower external perimeters the internal perimeter speed is used regardless of this setting." msgstr "" "Purgatze-dorrean purgatzean eta purgatze-dorrearen geruza bakanduak inprimatzean erabiliko den gehieneko inprimatze-abiadura. Purgatzean, dentsitate baxuko betegarriaren abiadura edo filamentuaren gehieneko abiadura bolumetrikotik kalkulatutako abiadura txikiagoa bada, txikiena erabiliko da.\n" "\n" "Geruza bakanduak inprimatzean, barruko perimetroaren abiadura edo filamentuaren gehieneko abiadura bolumetrikotik kalkulatutako abiadura txikiagoa bada, txikiena erabiliko da.\n" "\n" "Abiadura hau handitzeak dorrearen egonkortasunean eragina izan dezake, eta pitak purgatze-dorrean sortu diren pikorrekin talka egitean duen indarra handitu dezake.\n" "\n" "Parametro hau 90 mm/s-ko balio lehenetsitik gora handitu aurretik, ziurtatu zure inprimagailuak abiadura handiagoetan zubiak modu fidagarrian inprima ditzakeela eta tresna-aldaketan jarioa ondo kontrolatuta dagoela.\n" "\n" "Purgatze-dorrearen kanpoko perimetroetarako barruko perimetroaren abiadura erabiltzen da, ezarpen hau kontuan hartu gabe." msgid "Wall type" msgstr "Horma mota" msgid "" "Wipe tower outer wall type.\n" "1. Rectangle: The default wall type, a rectangle with fixed width and height.\n" "2. Cone: A cone with a fillet at the bottom to help stabilize the wipe tower.\n" "3. Rib: Adds four ribs to the tower wall for enhanced stability." msgstr "" "Purgatze-dorrearen kanpoko horma mota.\n" "1. Laukizuzena: horma mota lehenetsia, zabalera eta altuera finkoko laukizuzena.\n" "2. Konoa: behealdean biribiltzea duen konoa, purgatze-dorrea egonkortzen laguntzeko.\n" "3. Nerbioa: lau nerbio gehitzen dizkio dorrearen hormari egonkortasuna handitzeko." msgid "Rectangle" msgstr "Laukizuzena" msgid "Rib" msgstr "Nerbioa" msgid "Extra rib length" msgstr "Saihetsaren luzera gehigarria" msgid "Positive values can increase the size of the rib wall, while negative values can reduce the size. However, the size of the rib wall can not be smaller than that determined by the cleaning volume." msgstr "Balio positiboek nerbio-hormaren tamaina handitu dezakete, eta balio negatiboek txikitu. Hala ere, nerbio-hormaren tamaina ezin da garbiketa-bolumenak zehaztutakoa baino txikiagoa izan." msgid "Rib width" msgstr "Saihetsaren zabalera" msgid "Rib width is always less than half the prime tower side length." msgstr "Nerbioaren zabalera purgatze-dorrearen aldearen luzeraren erdia baino txikiagoa da beti." msgid "Fillet wall" msgstr "Erradio-horma" msgid "The wall of prime tower will fillet." msgstr "Purgatze-dorrearen horma biribildu egingo da." msgid "The extruder to use when printing perimeter of the wipe tower. Set to 0 to use the one that is available (non-soluble would be preferred)." msgstr "Purgatze-dorrearen perimetroa inprimatzean erabiliko den estrusorea. Ezarri 0 erabilgarri dagoena erabiltzeko (disolbagarria ez dena lehenetsiko da)." msgid "Purging volumes - load/unload volumes" msgstr "Purga-bolumenak - kargatzeko/deskargatzeko bolumenak" msgid "This vector saves required volumes to change from/to each tool used on the wipe tower. These values are used to simplify creation of the full purging volumes below." msgstr "Bektore honek purgatze-dorrean erabiltzen den tresna bakoitzetik/bakoitzera aldatzeko behar diren bolumenak gordetzen ditu. Balio hauek beheko purga-bolumen osoen sorrera sinplifikatzeko erabiltzen dira." msgid "Skip points" msgstr "Saltatu puntuak" msgid "The wall of prime tower will skip the start points of wipe path." msgstr "Purgatze-dorrearen hormak garbiketa-ibilbidearen hasiera-puntuak saihestuko ditu." msgid "Enable tower interface features" msgstr "Gaitu dorre-interfazearen ezaugarriak" msgid "Enable optimized prime tower interface behavior when different materials meet." msgstr "Gaitu purgatze-dorrearen interfazearen portaera optimizatua material desberdinak elkartzen direnean." msgid "Cool down from interface boost during prime tower" msgstr "Hoztu interfazearen indartzearen ondoren purgatze-dorrean" msgid "When interface-layer temperature boost is active, set the nozzle back to print temperature at the start of the prime tower so it cools down during the tower." msgstr "Interfaze-geruzaren tenperatura-indartzea aktibo dagoenean, ezarri berriro pita inprimatze-tenperaturan purgatze-dorrearen hasieran, dorrea inprimatu bitartean hoztu dadin." msgid "Infill gap" msgstr "Betegarriaren tartea" msgid "Infill gap." msgstr "Betegarriaren tartea." msgid "Purging after filament change will be done inside objects' infills. This may lower the amount of waste and decrease the print time. If the walls are printed with transparent filament, the mixed color infill will be visible. It will not take effect unless the prime tower is enabled." msgstr "Filamentua aldatu ondorengo purgatzea objektuen betegarrien barruan egingo da. Hondakinak eta inprimatze-denbora murriztu ditzake. Hormak filamentu gardenarekin inprimatzen badira, kolore nahasiko betegarria ikusiko da. Ez du eraginik izango purgatze-dorrea gaituta ez badago." msgid "Purging after filament change will be done inside objects' support. This may lower the amount of waste and decrease the print time. It will not take effect unless a prime tower is enabled." msgstr "Filamentua aldatu ondorengo purgatzea objektuen euskarrietan egingo da. Hondakinak eta inprimatze-denbora murriztu ditzake. Ez du eraginik izango purgatze-dorrea gaituta ez badago." msgid "This object will be used to purge the nozzle after a filament change to save filament and decrease the print time. Colors of the objects will be mixed as a result. It will not take effect unless the prime tower is enabled." msgstr "Objektu hau filamentua aldatu ondoren pita purgatzeko erabiliko da, filamentua aurrezteko eta inprimatze-denbora laburtzeko. Ondorioz, objektuen koloreak nahasiko dira. Ez du eraginik izango purgatze-dorrea gaituta ez badago." msgid "Maximal bridging distance" msgstr "Zubiaren gehieneko distantzia" msgid "Maximal distance between supports on sparse infill sections." msgstr "Dentsitate baxuko betegarriko sekzioetan euskarrien arteko gehieneko distantzia." msgid "Wipe tower purge lines spacing" msgstr "Purgatze-dorreko purga-lerroen tartea" msgid "Spacing of purge lines on the wipe tower." msgstr "Purgatze-dorreko purga-lerroen arteko tartea." msgid "Extra flow for purging" msgstr "Purgatzeko fluxu gehigarria" msgid "Extra flow used for the purging lines on the wipe tower. This makes the purging lines thicker or narrower than they normally would be. The spacing is adjusted automatically." msgstr "Purgatze-dorreko purga-lerroetarako erabiltzen den fluxu gehigarria. Horrek purga-lerroak normalean baino lodiagoak edo meheagoak egiten ditu. Tartea automatikoki doitzen da." msgid "Idle temperature" msgstr "Inaktibo dagoeneko tenperatura" msgid "Nozzle temperature when the tool is currently not used in multi-tool setups. This is only used when 'Ooze prevention' is active in Print Settings. Set to 0 to disable." msgstr "Tresna anitzeko konfigurazioetan tresna erabiltzen ari ez denean pitaren tenperatura. Hau Inprimatze-ezarpenetako 'Jarioaren prebentzioa' aktibo dagoenean bakarrik erabiltzen da. Ezarri 0 desgaitzeko." msgid "X-Y hole compensation" msgstr "X-Y zulo-konpentsazioa" msgid "Holes in objects will expand or contract in the XY plane by the set value. Positive values make holes bigger and negative values make holes smaller. This function is used to adjust sizes slightly when objects have assembly issues." msgstr "Objektuetako zuloak XY planoan zabaldu edo uzkurtuko dira ezarritako balioaren arabera. Balio positiboek zuloak handitzen dituzte; negatiboek txikitu. Muntaketa-arazoetan neurriak fintzeko erabiltzen da." msgid "X-Y contour compensation" msgstr "X-Y ingerada-konpentsazioa" msgid "Contours of objects will expand or contract in the XY plane by the set value. Positive values make contours bigger and negative values make contours smaller. This function is used to adjust sizes slightly when objects have assembly issues." msgstr "Objektuen sestrak XY planoan zabaldu edo uzkurtuko dira ezarritako balioaren arabera. Balio positiboek sestrak handitzen dituzte; negatiboek txikitu. Muntaketa-arazoetan neurriak fintzeko erabiltzen da." msgid "Convert holes to polyholes" msgstr "Bihurtu zuloak polizulo" msgid "" "Search for almost-circular holes that span more than one layer and convert the geometry to polyholes. Use the nozzle size and the (biggest) diameter to compute the polyhole.\n" "See http://hydraraptor.blogspot.com/2011/02/polyholes.html" msgstr "" "Bilatu geruza bat baino gehiago hartzen dituzten ia zulo zirkularrak eta bihurtu geometria polizulo. Erabili pitaren tamaina eta diametroa (handiena) polizuloa kalkulatzeko.\n" "Ikus http://hydraraptor.blogspot.com/2011/02/polyholes.html" msgid "Polyhole detection margin" msgstr "Polizuloak detektatzeko marjina" #, no-c-format, no-boost-format msgid "" "Maximum defection of a point to the estimated radius of the circle.\n" "As cylinders are often exported as triangles of varying size, points may not be on the circle circumference. This setting allows you some leeway to broaden the detection.\n" "In mm or in % of the radius." msgstr "" "Puntu batek zirkuluaren estimatutako erradioarekiko izan dezakeen gehieneko desbideratzea.\n" "Zilindroak askotan tamaina desberdineko triangelu gisa esportatzen direnez, baliteke puntuak zirkuluaren zirkunferentzian ez egotea. Ezarpen honek tarte pixka bat ematen dizu detekzioa zabaltzeko.\n" "mm-tan edo erradioaren ehuneko gisa." msgid "Polyhole twist" msgstr "Polizuloaren bihurdura" msgid "Rotate the polyhole every layer." msgstr "Biratu polizuloa geruza bakoitzean." msgid "Maximum Polyhole edge count" msgstr "Polyholearen gehieneko ertz kopurua" msgid "" "Maximum number of polyhole edges\n" "This setting limits the amount of edges a polyhole can have" msgstr "" "Polyhole baten gehieneko ertz kopurua\n" "Ezarpen honek polyhole batek izan dezakeen ertz kopurua mugatzen du" msgid "G-code thumbnails" msgstr "G-codearen miniaturak" msgid "Picture sizes to be stored into a .gcode and .sl1 / .sl1s files, in the following format: \"XxY, XxY, ...\"" msgstr " .gcode eta .sl1 / .sl1s fitxategietan gorde beharreko irudien tamainak, formatu honetan: \"XxY, XxY, ...\"" msgid "Format of G-code thumbnails" msgstr "G-codearen miniaturen formatua" msgid "Format of G-code thumbnails: PNG for best quality, JPG for smallest size, QOI for low memory firmware." msgstr "G-codearen miniaturen formatua: PNG kalitate onenerako, JPG tamaina txikienerako, QOI memoria gutxiko firmwarerako." msgid "Use relative E distances" msgstr "Erabili E distantzia erlatiboak" msgid "Relative extrusion is recommended when using \"label_objects\" option. Some extruders work better with this option unchecked (absolute extrusion mode). Wipe tower is only compatible with relative mode. It is recommended on most printers. Default is checked." msgstr "Estrusio erlatiboa gomendatzen da \"label_objects\" aukera erabiltzean. Estrusore batzuek hobeto funtzionatzen dute aukera hau desmarkatuta dagoenean (estrusio absolutuaren modua). Purgatze-dorrea modu erlatiboarekin bakarrik da bateragarria. Inprimagailu gehienetan gomendatzen da. Lehenespenez markatuta dago." msgid "The classic wall generator produces walls with constant extrusion width and for very thin areas, gap-fill is used. The Arachne engine produces walls with variable extrusion width." msgstr "Horma-sorgailu klasikoak estrusio-zabalera konstanteko hormak sortzen ditu eta eremu oso meheetan hutsune-betegarria erabiltzen du. Arachne motorrak estrusio-zabalera aldakorreko hormak sortzen ditu." msgid "Arachne" msgstr "Arachne" msgid "Wall transition length" msgstr "Horma-trantsizioaren luzera" msgid "When transitioning between different numbers of walls as the part becomes thinner, a certain amount of space is allotted to split or join the wall segments. It's expressed as a percentage over nozzle diameter." msgstr "Pieza mehetzen den heinean horma kopuru desberdinen artean trantsizioa egitean, espazio jakin bat esleitzen da horma-segmentuak zatitzeko edo elkartzeko. Pitaren diametroarekiko ehuneko gisa adierazten da." msgid "Wall transitioning filter margin" msgstr "Horma-trantsizioaren iragazki-marjina" msgid "Prevent transitioning back and forth between one extra wall and one less. This margin extends the range of extrusion widths which follow to [Minimum wall width - margin, 2 * Minimum wall width + margin]. Increasing this margin reduces the number of transitions, which reduces the number of extrusion starts/stops and travel time. However, large extrusion width variation can lead to under- or overextrusion problems. It's expressed as a percentage over nozzle diameter." msgstr "Saihestu horma bat gehiago eta bat gutxiago izatearen arteko joan-etorriko trantsizioak. Marjina honek estrusio-zabaleren tartea honela zabaltzen du:[Gutxieneko horma-zabalera - marjina, 2 * Gutxieneko horma-zabalera +marjina]. Marjina hau handitzeak trantsizio kopurua murrizten du, eta horrek estrusio-hasierak/-amaierak eta mugimendu-denbora murrizten ditu. Hala ere, estrusio-zabaleraren aldaketa handiek azpiestrusio edo gainestrusio arazoak sor ditzakete. Pitaren diametroarekiko ehuneko gisa adierazten da." msgid "Wall transitioning threshold angle" msgstr "Horma-trantsizioaren atalase-angelua" msgid "When to create transitions between even and odd numbers of walls. A wedge shape with an angle greater than this setting will not have transitions and no walls will be printed in the center to fill the remaining space. Reducing this setting reduces the number and length of these center walls, but may leave gaps or overextrude." msgstr "Horma kopuru bikoitien eta bakoitien artean trantsizioak noiz sortu. Ezarpen hau baino angelu handiagoa duen ziri-formak ez du trantsiziorik izango, eta ez da hormarik inprimatuko erdian geratzen den espazioa betetzeko. Ezarpen hau murrizteak erdiko horma horien kopurua eta luzera murrizten ditu, baina tarteak utzi edo gainestrusioa eragin dezake." msgid "Wall distribution count" msgstr "Horma-banaketaren kopurua" msgid "The number of walls, counted from the center, over which the variation needs to be spread. Lower values mean that the outer walls don't change in width." msgstr "Aldaketa zenbat hormatan banatu behar den, erditik zenbatuta. Balio txikiagoek esan nahi dute kanpoko hormek ez dutela zabalera aldatzen." msgid "Minimum feature size" msgstr "Ezaugarriaren gutxieneko tamaina" msgid "Minimum thickness of thin features. Model features that are thinner than this value will not be printed, while features thicker than than this value will be widened to the minimum wall width. It's expressed as a percentage over nozzle diameter." msgstr "Ezaugarri meheen gutxieneko lodiera. Balio hau baino meheagoak diren ezaugarriak ez dira inprimatuko; lodiagoak direnak gutxieneko horma-zabalerara zabalduko dira. Pitaren diametroarekiko ehuneko gisa adierazten da." msgid "Minimum wall length" msgstr "Hormaren gutxieneko luzera" msgid "" "Adjust this value to prevent short, unclosed walls from being printed, which could increase print time. Higher values remove more and longer walls.\n" "\n" "NOTE: Bottom and top surfaces will not be affected by this value to prevent visual gaps on the outside of the model. Adjust 'One wall threshold' in the Advanced settings below to adjust the sensitivity of what is considered a top-surface. 'One wall threshold' is only visible if this setting is set above the default value of 0.5, or if single-wall top surfaces is enabled." msgstr "" "Doitu balio hau horma labur eta itxi gabeak inprima ez daitezen; horrek inprimatze-denbora handitu lezake. Balio handiagoek horma gehiago eta luzeagoak kentzen dituzte.\n" "\n" "OHARRA: beheko eta goiko gainazalek ez dute balio honen eraginik izango, modeloaren kanpoaldean hutsune ikusgarriak saihesteko. Doitu beheko Ezarpen aurreratuetako 'Horma bakarreko atalasea' goiko gainazaltzat zer hartzen den zehazteko sentikortasuna doitzeko. 'Horma bakarreko atalasea' ezarpen hau 0.5 balio lehenetsiaren gainetik ezarrita badago edo horma bakarreko goiko gainazalak gaituta badaude bakarrik ikusiko da." msgid "Maximum wall resolution" msgstr "Hormen gehieneko bereizmena" msgid "This value determines the smallest wall line segment length in mm. The smaller you set this value, the more accurate and precise the walls will be." msgstr "Balio honek horma-lerroaren segmentu laburrenaren luzera zehazten du, mm-tan. Zenbat eta balio txikiagoa ezarri, orduan eta zehatzagoak izango dira hormak." msgid "Maximum wall deviation" msgstr "Hormen gehieneko desbideratzea" msgid "The maximum deviation allowed when reducing the resolution for the 'Maximum wall resolution' setting. If you increase this, the print will be less accurate, but the G-Code will be smaller. 'Maximum wall deviation' limits 'Maximum wall resolution', so if the two conflict, 'Maximum wall deviation' takes precedence." msgstr "'Hormaren gehieneko bereizmena' ezarpenerako bereizmena murriztean baimendutako gehieneko desbideratzea. Handitzen baduzu, inprimaketa ez da hain zehatza izango, baina G-codea txikiagoa izango da. 'Hormaren gehieneko desbideratzeak'-ek 'Hormaren gehieneko bereizmena' mugatzen du; beraz, bien artean gatazkarik badago, 'Hormaren gehieneko desbideratzeak' izango du lehentasuna." msgid "First layer minimum wall width" msgstr "Lehen geruzaren gutxieneko horma-zabalera" msgid "The minimum wall width that should be used for the first layer is recommended to be set to the same size as the nozzle. This adjustment is expected to enhance adhesion." msgstr "Lehen geruzan erabili beharreko gutxieneko horma-zabalera pitaren tamaina berean ezartzea gomendatzen da. Doikuntza honek itsaspena hobetzea espero da." msgid "Minimum wall width" msgstr "Gutxieneko horma-zabalera" msgid "Width of the wall that will replace thin features (according to the Minimum feature size) of the model. If the Minimum wall width is thinner than the thickness of the feature, the wall will become as thick as the feature itself. It's expressed as a percentage over nozzle diameter." msgstr "Modeloaren ezaugarri meheak (ezaugarriaren gutxieneko tamainaren arabera) ordeztuko dituen hormaren zabalera. Gutxieneko horma-zabalera ezaugarriaren lodiera baino meheagoa bada, hormak ezaugarriaren beraren lodiera izango du. Pitaren diametroarekiko ehuneko gisa adierazten da." msgid "Hotend change time" msgstr "Hotenda aldatzeko denbora" msgid "Time to change hotend." msgstr "Hotenda aldatzeko denbora." msgid "Hotend change" msgstr "Hotend aldaketa" msgid "When changing the hotend, it is recommended to extrude a certain length of filament from the original nozzle. This helps minimize nozzle oozing." msgstr "Hotenda aldatzean, jatorrizko pitarekin filamentu luzera jakin bat estruitzea gomendatzen da. Horrek pitaren jarioa murrizten laguntzen du." msgid "Extruder change" msgstr "Estrusore aldaketa" msgid "To prevent oozing, the nozzle will perform a reverse travel movement for a certain period after the ramming is complete. The setting define the travel time." msgstr "Jarioa saihesteko, pitak alderantzizko desplazamendu bat egingo du denbora-tarte jakin batean, muturraren moldaketa amaitu ondoren. Ezarpen honek desplazamendu-denbora zehazten du." msgid "To prevent oozing, the nozzle temperature will be cooled during ramming. Therefore, the ramming time must be greater than the cooldown time. 0 means disabled." msgstr "Jarioa saihesteko, pitaren tenperatura jaitsiko da muturraren moldaketan. Horregatik, muturraren moldaketa-denborak hozte-denbora baino handiagoa izan behar du. 0 balioak desgaituta dagoela esan nahi du." msgid "The maximum volumetric speed for ramming before extruder change, where -1 means using the maximum volumetric speed." msgstr "Estrusorea aldatu aurreko muturraren moldaketarako gehieneko abiadura bolumetrikoa; -1 balioak gehieneko abiadura bolumetrikoa erabiltzea esan nahi du." msgid "To prevent oozing, the nozzle temperature will be cooled during ramming. Note: only a cooldown command and fan activation are triggered, reaching the target temperature is not guaranteed. 0 means disabled." msgstr "Jarioa saihesteko, pitaren tenperatura jaitsiko da muturraren moldaketan. Oharra: hozte-agindua eta haizagailuaren aktibazioa soilik abiarazten dira; ez da bermatzen helburuko tenperaturara iristea. 0 balioak desgaituta dagoela esan nahi du." msgid "The maximum volumetric speed for ramming before a hotend change, where -1 means using the maximum volumetric speed." msgstr "Hotenda aldatu aurretik muturraren moldaketarako gehieneko abiadura bolumetrikoa; -1 balioak gehieneko abiadura bolumetrikoa erabiltzea esan nahi du." msgid "length when change hotend" msgstr "luzera hotenda aldatzean" msgid "When this retraction value is modified, it will be used as the amount of filament retracted inside the hotend before changing hotends." msgstr "Atzera-egitearen balio hau aldatzen denean, hotendak aldatu aurretik hotendaren barruan atzera-egindako filamentu-kopuru gisa erabiliko da." msgid "Support fast purge mode" msgstr "Euskarriaren purgatze-modu azkarra" msgid "Whether this printer supports fast purge mode with optimized temperature and multiplier." msgstr "Inprimagailu honek tenperatura eta biderkatzaile optimizatuak dituen purgatze azkarreko modua onartzen duen." # AI Translated msgid "Filament change" msgstr "Filamentu-aldaketa" # AI Translated msgid "The volume of material required to prime the extruder on the tower, excluding a hotend change." msgstr "Dorrean estrusorea prestatzeko behar den material-bolumena, hotend-aldaketa kanpo utzita." msgid "The volume of material required to prime the extruder for a hotend change on the tower." msgstr "Hotenda aldatzean estrusorea dorrean prestatzeko behar den material-bolumena." msgid "Preheat temperature delta" msgstr "Aurreberotze-tenperaturaren diferentzia" msgid "Temperature delta applied during pre-heating before tool change." msgstr "Tresna aldatu aurreko beroketan aplikatutako tenperatura-delta." msgid "Detect narrow internal solid infills" msgstr "Detektatu barruko betegarri solido estua" msgid "This option will auto-detect narrow internal solid infill areas. If enabled, the concentric pattern will be used for the area to speed up printing. Otherwise, the rectilinear pattern will be used by default." msgstr "Aukera honek barruko betegarri solido estuko eremuak automatikoki detektatuko ditu. Gaituta badago, eremu horretan patroi zentrokidea erabiliko da inprimaketa azkartzeko. Bestela, patroi lerrozuzena erabiliko da lehenespenez." msgid "invalid value " msgstr "balio baliogabea " msgid "Invalid value when spiral vase mode is enabled: " msgstr "Balio baliogabea espiral formako loreontzi modua gaituta dagoenean: " msgid "Bridge line width must not exceed nozzle diameter: " msgstr "Zubien lerro-zabalerak ezin du pitaren diametroa gainditu: " msgid "too large line width " msgstr "lerro-zabalera handiegia " msgid " not in range " msgstr " ez dago tartean " msgid "Export 3MF" msgstr "Esportatu 3MF" msgid "This exports the project as a 3MF file." msgstr "Honek proiektua 3MF gisa esportatzen du." msgid "Export slicing data" msgstr "Esportatu xerratze-datuak" msgid "Export slicing data to a folder" msgstr "Esportatu xerratze-datuak karpeta batera" msgid "Load slicing data" msgstr "Kargatu xerratze-datuak" msgid "Load cached slicing data from directory." msgstr "Kargatu cachean gordetako xerratze-datuak direktoriotik." msgid "Export STL" msgstr "Esportatu STL" msgid "Export the objects as single STL." msgstr "Esportatu objektuak STL bakar gisa." msgid "Export multiple STLs" msgstr "Esportatu hainbat STL" msgid "Export the objects as multiple STLs to directory." msgstr "Esportatu objektuak hainbat STL gisa direktoriora." msgid "Slice the plates: 0-all plates, i-plate i, others-invalid" msgstr "Plakak xerratu: 0-plaka guztiak, i-i plaka, besteak-baliogabea" msgid "This shows command help." msgstr "Honek komandoen laguntza erakusten du." msgid "UpToDate" msgstr "Eguneratuta" msgid "Update the config values of 3MF to latest." msgstr "Eguneratu 3MF-ren konfigurazio-balioak azken bertsiora." msgid "Load default filaments" msgstr "Kargatu filamentu lehenetsiak" msgid "Load first filament as default for those not loaded." msgstr "Kargatu lehen filamentua kargatu ez direnentzako lehenetsi gisa." msgid "Minimum save" msgstr "Gutxieneko gordetzea" msgid "Export 3MF with minimum size." msgstr "Esportatu 3MF gutxieneko tamainarekin." msgid "mtcpp" msgstr "mtcpp" msgid "max triangle count per plate for slicing" msgstr "xerratzeko plaka bakoitzeko gehieneko triangelu kopurua" msgid "mstpp" msgstr "mstpp" msgid "max slicing time per plate in seconds" msgstr "plaka bakoitzeko gehieneko xerratze-denbora segundotan" msgid "No check" msgstr "Egiaztapenik ez" msgid "Do not run any validity checks, such as G-code path conflicts check." msgstr "Ez exekutatu baliozkotasun-egiaztapenik, hala nola G-code bideen gatazken egiaztapena." msgid "Normative check" msgstr "Arauzko egiaztapena" msgid "Check the normative items." msgstr "Egiaztatu arauzko elementuak." msgid "Output Model Info" msgstr "Irteerako modeloaren informazioa" msgid "This outputs the model’s information." msgstr "Atera modeloaren informazioa ateratzen du honek." msgid "Export Settings" msgstr "Esportatu ezarpenak" msgid "This exports settings to a file." msgstr "Honek ezarpenak fitxategi batera esportatzen ditu." msgid "Send progress to pipe" msgstr "Bidali aurrerapena pipe-ra" msgid "Send progress to pipe." msgstr "Bidali aurrerapena pipe-ra." msgid "Arrange Options" msgstr "Antolatzeko aukerak" msgid "Arrange options: 0-disable, 1-enable, others-auto" msgstr "Antolatzeko aukerak: 0-desgaitu, 1-gaitu, besteak-auto" msgid "Repetition count" msgstr "Errepikapen kopurua" msgid "Repetition count of the whole model." msgstr "Modelo osoaren errepikapen kopurua." msgid "Ensure on bed" msgstr "Ziurtatu ohean dagoela" msgid "Lift the object above the bed when it is partially below. Disabled by default." msgstr "Altxatu objektua ohearen gainera, zati bat azpian badago. Lehenespenez desgaituta dago." msgid "Arrange the supplied models in a plate and merge them in a single model in order to perform actions once." msgstr "Antolatu emandako modeloak plaka batean eta batu modelo bakar batean, ekintzak behin bakarrik egiteko." msgid "Convert Unit" msgstr "Bihurtu unitatea" msgid "Convert the units of model." msgstr "Bihurtu modeloaren unitateak." msgid "Orient Options" msgstr "Orientazio-aukerak" msgid "Orient options: 0-disable, 1-enable, others-auto" msgstr "Orientazio-aukerak: 0-desgaitu, 1-gaitu, besteak-auto" msgid "Rotation angle around the Z axis in degrees." msgstr "Z ardatzaren inguruko biraketa-angelua, gradutan." msgid "Rotate around X" msgstr "Biratu X inguruan" msgid "Rotation angle around the X axis in degrees." msgstr "X ardatzaren inguruko biraketa-angelua, gradutan." msgid "Rotate around Y" msgstr "Biratu Y inguruan" msgid "Rotation angle around the Y axis in degrees." msgstr "Y ardatzaren inguruko biraketa-angelua, gradutan." msgid "Scale the model by a float factor." msgstr "Eskalatu modeloa koma mugikorreko faktore baten bidez." msgid "Load General Settings" msgstr "Kargatu ezarpen orokorrak" msgid "Load process/machine settings from the specified file." msgstr "Kargatu prozesuaren/makinaren ezarpenak zehaztutako fitxategitik." msgid "Load Filament Settings" msgstr "Kargatu filamentu-ezarpenak" msgid "Load filament settings from the specified file list." msgstr "Kargatu filamentu-ezarpenak zehaztutako fitxategi-zerrendatik." msgid "Skip Objects" msgstr "Saltatu objektuak" msgid "Skip some objects in this print." msgstr "Saltatu objektu batzuk inprimaketa honetan." msgid "Clone Objects" msgstr "Klonatu objektuak" msgid "Clone objects in the load list." msgstr "Klonatu karga-zerrendako objektuak." msgid "Load uptodate process/machine settings when using uptodate" msgstr "Kargatu prozesuaren/makinaren ezarpen eguneratuak uptodate erabiltzean" msgid "load up-to-date process/machine settings from the specified file when using up-to-date" msgstr "kargatu prozesuaren/makinaren ezarpen eguneratuak zehaztutako fitxategitik uptodate erabiltzean" msgid "Load uptodate filament settings when using uptodate" msgstr "Kargatu filamentu-ezarpen eguneratuak uptodate erabiltzean" msgid "Load uptodate filament settings from the specified file when using uptodate." msgstr "Kargatu filamentu-ezarpen eguneratuak zehaztutako fitxategitik uptodate erabiltzean." msgid "Downward machines check" msgstr "Beheranzko makinen egiaztapena" msgid "If enabled, check whether current machine downward compatible with the machines in the list." msgstr "Gaituta badago, egiaztatu uneko makina zerrendako makinekin beherantz bateragarria den." msgid "Downward machines settings" msgstr "Beheranzko makinen ezarpenak" msgid "The machine settings list needs to do downward checking." msgstr "Makinaren ezarpen-zerrendak beheranzko egiaztapena egin behar du." msgid "Load assemble list" msgstr "Kargatu muntaketa-zerrenda" msgid "Load assemble object list from config file." msgstr "Kargatu muntatutako objektuen zerrenda konfigurazio-fitxategitik." msgid "Data directory" msgstr "Datuen direktorioa" msgid "Load and store settings at the given directory. This is useful for maintaining different profiles or including configurations from a network storage." msgstr "Kargatu eta gorde ezarpenak adierazitako direktorioan. Erabilgarria da profil desberdinak mantentzeko edo sareko biltegiratzeko konfigurazioak erabiltzeko." msgid "Output directory" msgstr "Irteerako direktorioa" msgid "This is the output directory for exported files." msgstr "Hau da esportatutako fitxategien irteerako direktorioa." msgid "Debug level" msgstr "Arazketa-maila" msgid "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:trace\n" msgstr "Arazketa-erregistroaren maila ezartzen du. 0: oso larria, 1: errorea, 2: abisua, 3: info, 4: arazketa, 5: trazatu\n" msgid "Log file" msgstr "Erregistro-fitxategia" msgid "Redirects debug logging to file.\n" msgstr "Arazketa-erregistroa fitxategi batera birbideratzen du.\n" msgid "Enable timelapse for print" msgstr "Gaitu timelapsea inprimaketarako" msgid "If enabled, this slicing will be considered using timelapse." msgstr "Gaituta badago, xerraketa honek timelapsea erabiliko duela hartuko da kontuan." msgid "Load custom G-code" msgstr "Kargatu G-code pertsonalizatua" msgid "Load custom G-code from json." msgstr "Kargatu G-code pertsonalizatua JSONetik." msgid "Load filament IDs" msgstr "Kargatu filamentu-IDak" msgid "Load filament IDs for each object." msgstr "Kargatu objektu bakoitzaren filamentu-IDak." msgid "Allow multiple colors on one plate" msgstr "Baimendu kolore anitz plaka batean" msgid "If enabled, Arrange will allow multiple colors on one plate." msgstr "Gaituta badago, Antolatu aukerak kolore anitz baimenduko ditu plaka batean." msgid "Allow rotation when arranging" msgstr "Baimendu biraketa antolatzean" msgid "If enabled, Arrange will allow rotation when placing objects." msgstr "Gaituta badago, Antolatu aukerak biraketa baimenduko du objektuak kokatzean." msgid "Avoid extrusion calibrate region when arranging" msgstr "Saihestu estrusioa kalibratzeko eremua antolatzean" msgid "If enabled, Arrange will avoid extrusion calibrate region when placing objects." msgstr "Gaituta badago, Antolatu aukerak estrusioa kalibratzeko eremua saihestuko du objektuak kokatzean." msgid "Skip modified G-code in 3MF" msgstr "Saltatu 3MFko G-code aldatua" msgid "Skip the modified G-code in 3MF from printer or filament presets." msgstr "Saltatu inprimagailuaren edo filamentuaren aurrezarpenetako 3MFko G-code aldatua." msgid "MakerLab name" msgstr "MakerLab izena" msgid "MakerLab name to generate this 3MF." msgstr "3MF hau sortzeko MakerLab izena." msgid "MakerLab version" msgstr "MakerLab bertsioa" msgid "MakerLab version to generate this 3MF." msgstr "3MF hau sortzeko MakerLab bertsioa." msgid "Metadata name list" msgstr "Metadatuen izen-zerrenda" msgid "Metadata name list added into 3MF." msgstr "3MFra gehitutako metadatuen izen-zerrenda." msgid "Metadata value list" msgstr "Metadatuen balio-zerrenda" msgid "Metadata value list added into 3MF." msgstr "3MFra gehitutako metadatuen balio-zerrenda." msgid "Allow 3MF with newer version to be sliced" msgstr "Baimendu bertsio berriagoko 3MFak xerratzea" msgid "Allow 3MF with newer version to be sliced." msgstr "Baimendu bertsio berriagoko 3MFak xerratzea." msgid "Current Z-hop" msgstr "Uneko Z jauzia" msgid "Contains Z-hop present at the beginning of the custom G-code block." msgstr "G-code pertsonalizatuaren blokearen hasieran dagoen Z jauzia dauka." msgid "Position of the extruder at the beginning of the custom G-code block. If the custom G-code travels somewhere else, it should write to this variable so OrcaSlicer knows where it travels from when it gets control back." msgstr "Estrusorearen posizioa G-code pertsonalizatuaren blokearen hasieran. G-code pertsonalizatua beste nonbaitera mugitzen bada, aldagai honetan idatzi behar du, OrcaSlicerrek kontrola berreskuratzean nondik mugitzen den jakin dezan." msgid "Retraction state at the beginning of the custom G-code block. If the custom G-code moves the extruder axis, it should write to this variable so OrcaSlicer de-retracts correctly when it gets control back." msgstr "Atzera-egitearen egoera G-code pertsonalizatuaren blokearen hasieran. G-code pertsonalizatuak estrusorearen ardatza mugitzen badu, aldagai honetan idatzi behar du, OrcaSlicerrek kontrola berreskuratzean atzera-egitea behar bezala desegin dezan." msgid "Extra de-retraction" msgstr "Atzera-egitea desegite gehigarria" msgid "Currently planned extra extruder priming after de-retraction." msgstr "Atzera-egitea desegin ondoren aurreikusitako estrusorearen primatze gehigarria." msgid "Absolute E position" msgstr "E posizio absolutua" msgid "Current position of the extruder axis. Only used with absolute extruder addressing." msgstr "Estrusore-ardatzaren uneko posizioa. Estrusorearen helbideratze absolutuarekin bakarrik erabiltzen da." msgid "Current extruder" msgstr "Uneko estrusorea" msgid "Zero-based index of currently used extruder." msgstr "Unean erabilitako estrusorearen zeroan oinarritutako indizea." msgid "Current object index" msgstr "Uneko objektuaren indizea" msgid "Specific for sequential printing. Zero-based index of currently printed object." msgstr "Inprimatze sekuentzialerako espezifikoa. Unean inprimatzen ari den objektuaren zeroan oinarritutako indizea." msgid "Has wipe tower" msgstr "Purgatze-dorrea du" msgid "Whether or not wipe tower is being generated in the print." msgstr "Inprimaketan purgatze-dorrea sortzen ari den ala ez." msgid "Initial extruder" msgstr "Hasierako estrusorea" msgid "Zero-based index of the first extruder used in the print. Same as initial_tool." msgstr "Inprimaketan erabilitako lehen estrusorearen zeroan oinarritutako indizea. initial_tool-en berdina." msgid "Initial tool" msgstr "Hasierako tresna" msgid "Zero-based index of the first extruder used in the print. Same as initial_extruder." msgstr "Inprimaketan erabilitako lehen estrusorearen zeroan oinarritutako indizea. initial_extruder-en berdina." msgid "Is extruder used?" msgstr "Estrusorea erabiltzen da?" msgid "Vector of booleans stating whether a given extruder is used in the print." msgstr "Inprimaketan estrusore jakin bat erabiltzen den adierazten duen balio boolearren bektorea." msgid "Number of extruders" msgstr "Estrusore kopurua" msgid "Total number of extruders, regardless of whether they are used in the current print." msgstr "Estrusoreen kopuru osoa, uneko inprimaketan erabiltzen diren ala ez kontuan hartu gabe." msgid "Has single extruder MM priming" msgstr "Estrusore bakarreko MM primatzea du" msgid "Are the extra multi-material priming regions used in this print?" msgstr "Inprimaketa honetan material anitzeko primatze-eremu gehigarriak erabiltzen dira?" msgid "Volume per extruder" msgstr "Bolumena estrusoreko" msgid "Total filament volume extruded per extruder during the entire print." msgstr "Inprimaketa osoan estrusore bakoitzak estruitutako filamentuaren bolumen osoa." msgid "Total tool changes" msgstr "Tresna-aldaketak guztira" msgid "Number of tool changes during the print." msgstr "Inprimaketan zehar egindako tresna-aldaketen kopurua." msgid "Total volume" msgstr "Bolumena guztira" msgid "Total volume of filament used during the entire print." msgstr "Inprimaketa osoan erabilitako filamentuaren bolumen osoa." msgid "Weight per extruder" msgstr "Pisua estrusoreko" msgid "Weight per extruder extruded during the entire print. Calculated from filament_density value in Filament Settings." msgstr "Inprimaketa osoan estrusore bakoitzak estruitutako pisua. Filamentuaren ezarpenetako filament_density baliotik kalkulatua." msgid "Total weight" msgstr "Pisua guztira" msgid "Total weight of the print. Calculated from filament_density value in Filament Settings." msgstr "Inprimaketaren pisu osoa. Filamentuaren ezarpenetako filament_density baliotik kalkulatua." msgid "Total layer count" msgstr "Geruza kopurua guztira" msgid "Number of layers in the entire print." msgstr "Inprimaketa osoaren geruza kopurua." msgid "Print time (normal mode)" msgstr "Inprimatze-denbora (modu arrunta)" msgid "Estimated print time when printed in normal mode (i.e. not in silent mode). Same as print_time." msgstr "Modu normalean inprimatzean kalkulatutako inprimatze-denbora (hau da, modu isilean ez). print_time parametroaren berdina." msgid "Estimated print time when printed in normal mode (i.e. not in silent mode). Same as normal_print_time." msgstr "Modu normalean inprimatzean kalkulatutako inprimatze-denbora (hau da, modu isilean ez). normal_print_time parametroaren berdina." msgid "Print time (silent mode)" msgstr "Inprimatze-denbora (modu isila)" msgid "Estimated print time when printed in silent mode." msgstr "Modu isilean inprimatzean kalkulatutako inprimatze-denbora." msgid "Total cost of all material used in the print. Calculated from filament_cost value in Filament Settings." msgstr "Inprimaketan erabilitako material guztiaren kostua. Filamentu-ezarpenetako filament_cost baliotik kalkulatzen da." msgid "Total wipe tower cost" msgstr "Purgatze-dorrearen kostu osoa" msgid "Total cost of the material wasted on the wipe tower. Calculated from filament_cost value in Filament Settings." msgstr "Purgatze-dorrean alferrik galdutako materialaren kostu osoa. Filamentu-ezarpenetako filament_cost baliotik kalkulatzen da." msgid "Wipe tower volume" msgstr "Purgatze-dorrearen bolumena" msgid "Total filament volume extruded on the wipe tower." msgstr "Purgatze-dorrean estruitutako filamentuen bolumen osoa." msgid "Used filament" msgstr "Erabilitako filamentua" msgid "Total length of filament used in the print." msgstr "Inprimaketan erabilitako filamentuen luzera osoa." msgid "Print time (seconds)" msgstr "Inprimatze-denbora (segundoak)" msgid "Total estimated print time in seconds. Replaced with actual value during post-processing." msgstr "Kalkulatutako guztizko inprimatze-denbora, segundotan. Benetako balioarekin ordezten da osteko prozesatzean." msgid "Filament length (meters)" msgstr "Filamentuaren luzera (metroak)" msgid "Total filament length used in meters. Replaced with actual value during post-processing." msgstr "Erabilitako filamentuen guztizko luzera, metrotan. Benetako balioarekin ordezten da osteko prozesatzean." msgid "Number of objects" msgstr "Objektu kopurua" msgid "Total number of objects in the print." msgstr "Inprimaketako objektu kopuru osoa." msgid "Number of instances" msgstr "Instantzia kopurua" msgid "Total number of object instances in the print, summed over all objects." msgstr "Inprimaketako objektu-instantzien kopuru osoa, objektu guztien batura." msgid "Scale per object" msgstr "Eskala objektuko" msgid "" "Contains a string with the information about what scaling was applied to the individual objects. Indexing of the objects is zero-based (first object has index 0).\n" "Example: 'x:100% y:50% z:100%'." msgstr "" "Banakako objektuei aplikatutako eskalatzeari buruzko informazio-katea dauka. Objektuen indizeak zerotik hasten dira (lehen objektuak 0 indizea du).\n" "Adibidea: 'x:100% y:50% z:100%'." msgid "Input filename without extension" msgstr "Sarrerako fitxategi-izena luzapenik gabe" msgid "Source filename of the first object, without extension." msgstr "Lehen objektuaren jatorrizko fitxategi-izena, luzapenik gabe." msgid "The vector has two elements: X and Y coordinate of the point. Values in mm." msgstr "Bektoreak bi elementu ditu: puntuaren X eta Y koordenatuak. Balioak mm-tan." msgid "The vector has two elements: X and Y dimension of the bounding box. Values in mm." msgstr "Bektoreak bi elementu ditu: muga-koadroaren X eta Y dimentsioak. Balioak mm-tan." msgid "First layer convex hull" msgstr "Lehen geruzaren estalki ganbila" msgid "Vector of points of the first layer convex hull. Each element has the following format:'[x, y]' (x and y are floating-point numbers in mm)." msgstr "Lehen geruzaren estalki ganbilaren puntuen bektorea. Elementu bakoitzak formatu hau du: '[x, y]' (x eta y koma mugikorreko zenbakiak dira, mm-tan)." msgid "Bottom-left corner of the first layer bounding box" msgstr "Lehen geruzaren muga-koadroaren behe-ezkerreko izkina" msgid "Top-right corner of the first layer bounding box" msgstr "Lehen geruzaren muga-koadroaren goi-eskuineko izkina" msgid "Size of the first layer bounding box" msgstr "Lehen geruzaren muga-kutxaren tamaina" msgid "Bottom-left corner of print bed bounding box" msgstr "Inprimatze-ohearen muga-kutxaren behe-ezkerreko ertza" msgid "Top-right corner of print bed bounding box" msgstr "Inprimatze-ohearen muga-kutxaren goi-eskuineko ertza" msgid "Size of the print bed bounding box" msgstr "Inprimatze-ohearen muga-kutxaren tamaina" msgid "Timestamp" msgstr "Denbora-zigilua" msgid "String containing current time in yyyyMMdd-hhmmss format." msgstr "Uneko ordua yyyyMMdd-hhmmss formatuan duen katea." msgid "Day" msgstr "Eguna" msgid "Hour" msgstr "Ordua" msgid "Minute" msgstr "Minutua" msgid "Second" msgstr "Segundoa" msgid "Print preset name" msgstr "Inprimatze-aurrezarpenaren izena" msgid "Name of the print preset used for slicing." msgstr "Xerraketarako erabilitako inprimatze-aurrezarpenaren izena." msgid "Filament preset name" msgstr "Filamentu-aurrezarpenaren izena" msgid "Names of the filament presets used for slicing. The variable is a vector containing one name for each extruder." msgstr "Xerraketarako erabilitako filamentu-aurrezarpenen izenak. Aldagaia estrusore bakoitzeko izen bat duen bektorea da." msgid "Printer preset name" msgstr "Inprimagailu-aurrezarpenaren izena" msgid "Name of the printer preset used for slicing." msgstr "Xerraketarako erabilitako inprimagailu-aurrezarpenaren izena." msgid "Physical printer name" msgstr "Inprimagailu fisikoaren izena" msgid "Name of the physical printer used for slicing." msgstr "Xerraketarako erabilitako inprimagailu fisikoaren izena." msgid "Layer number" msgstr "Geruza-zenbakia" msgid "Index of the current layer. One-based (i.e. first layer is number 1)." msgstr "Uneko geruzaren indizea. Batean oinarritua (hau da, lehen geruza 1 zenbakia da)." msgid "Layer Z" msgstr "Geruzaren Z" msgid "Height of the current layer above the print bed, measured to the top of the layer." msgstr "Uneko geruzaren altuera inprimatze-ohearen gainetik, geruzaren goiko aldera neurtuta." msgid "Maximal layer Z" msgstr "Geruzaren gehieneko Z" msgid "Height of the last layer above the print bed." msgstr "Azken geruzaren altuera inprimatze-ohearen gainetik." msgid "Filament extruder ID" msgstr "Filamentuaren estrusore-IDa" msgid "The current extruder ID. The same as current_extruder." msgstr "Uneko estrusore-IDa. current_extruder-en berdina." msgid "Error in zip archive" msgstr "Errorea ZIP artxiboan" msgid "Generating walls" msgstr "Hormak sortzen" msgid "Generating infill regions" msgstr "Betegarri-eremuak sortzen" msgid "Generating infill toolpath" msgstr "Betegarrirako inprimatze-ibilbidea sortzen" msgid "Detect overhangs for auto-lift" msgstr "Detektatu irtenguneak auto-jasotzerako" msgid "Checking support necessity" msgstr "Euskarrien beharra egiaztatzen" msgid "floating regions" msgstr "eskualde flotatzaileak" msgid "floating cantilever" msgstr "irtengune flotatzailea" msgid "large overhangs" msgstr "irtengune handiak" #, c-format, boost-format msgid "It seems object %s has %s. Please re-orient the object or enable support generation." msgstr "Badirudi %s objektuak %s dituela. Orientatu berriro objektua edo gaitu euskarrien sorrera." msgid "Generating support" msgstr "Euskarriak sortzen" msgid "Optimizing toolpath" msgstr "Inprimatze-ibilbidea optimizatzen" msgid "Slicing mesh" msgstr "Sarea xerratzen" msgid "No layers were detected. You might want to repair your STL file(s) or check their size or thickness and retry.\n" msgstr "Ez da geruzarik detektatu. Baliteke STL fitxategia(k) konpondu behar izatea edo haien tamaina edo lodiera egiaztatu eta berriro saiatu behar izatea.\n" msgid "" "An object's XY size compensation will not be used because it is also color-painted.\n" "XY Size compensation cannot be combined with color-painting." msgstr "" "Objektu baten XY tamainaren konpentsazioa ez da erabiliko, kolorez margotuta ere badagoelako.\n" "XY tamainaren konpentsazioa ezin da kolore-margoketarekin konbinatu." msgid "" "An object has enabled XY Size compensation which will not be used because it is also fuzzy skin painted.\n" "XY Size compensation cannot be combined with fuzzy skin painting." msgstr "" "Objektu batek XY tamainaren konpentsazioa gaituta dauka, baina ez da erabiliko gainazal zimurra margotuta duelako.\n" "XY tamainaren konpentsazioa ezin da gainazal zimurraren margoketarekin konbinatu." msgid "Object name" msgstr "Objektuaren izena" msgid "Support: generate contact points" msgstr "Euskarriak: sortu kontaktu-puntuak" msgid "Loading of a model file failed." msgstr "Modelo-fitxategia kargatzeak huts egin du." msgid "Meshing of a model file failed or no valid shape." msgstr "Modelo-fitxategiaren sareztatzeak huts egin du edo ez dago baliozko formarik." msgid "The supplied file couldn't be read because it's empty." msgstr "Emandako fitxategia ezin izan da irakurri hutsik dagoelako." msgid "Unknown file format: input file must have .stl, .obj, or .amf(.xml) extension." msgstr "Fitxategi-formatu ezezaguna: sarrerako fitxategiak .stl, .obj edo .amf(.xml) luzapena izan behar du." msgid "Unknown file format: input file must have .3mf or .zip.amf extension." msgstr "Fitxategi-formatu ezezaguna: sarrerako fitxategiak .3mf edo .zip.amf luzapena izan behar du." msgid "load_obj: failed to parse" msgstr "load_obj: ezin izan da analizatu" msgid "load mtl in obj: failed to parse" msgstr "obj-ko mtl kargatzea: ezin izan da analizatu" msgid "The file contains polygons with more than 4 vertices." msgstr "Fitxategiak 4 erpin baino gehiagoko poligonoak ditu." msgid "The file contains polygons with less than 2 vertices." msgstr "Fitxategiak 2 erpin baino gutxiagoko poligonoak ditu." msgid "The file contains invalid vertex index." msgstr "Fitxategiak erpin-indize baliogabea du." msgid "This OBJ file couldn't be read because it's empty." msgstr "OBJ fitxategi hau ezin izan da irakurri, hutsik dagoelako." msgid "Max Volumetric Speed Calibration" msgstr "Gehieneko abiadura bolumetrikoaren kalibrazioa" msgid "Manage Result" msgstr "Kudeatu emaitza" msgid "Manual Calibration" msgstr "Eskuzko kalibrazioa" msgid "Result can be read by human eyes." msgstr "Emaitza begiz irakur daiteke." msgid "Auto-Calibration" msgstr "Kalibrazio automatikoa" msgid "We would use Lidar to read the calibration result" msgstr "Lidar erabiliko dugu kalibrazioaren emaitza irakurtzeko" msgid "Prev" msgstr "Aurrekoa" msgid "Recalibration" msgstr "Birkalibrazioa" msgid "Calibrate" msgstr "Kalibratu" msgid "Finish" msgstr "Amaitu" msgid "How can I use calibration results?" msgstr "Nola erabil ditzaket kalibrazio-emaitzak?" msgid "You could change the Flow Dynamics Calibration Factor in material editing" msgstr "Fluxu-dinamikaren kalibrazio-faktorea materialaren edizioan alda dezakezu" msgid "" "The current firmware version of the printer does not support calibration.\n" "Please upgrade the printer firmware." msgstr "" "Inprimagailuaren uneko firmware-bertsioak ez du kalibrazioa onartzen.\n" "Eguneratu inprimagailuaren firmwarea." msgid "Calibration not supported" msgstr "Kalibrazioa ez da onartzen" msgid "Flow Dynamics" msgstr "Fluxu-dinamika" msgid "Max Volumetric Speed" msgstr "Gehieneko abiadura bolumetrikoa" #, c-format, boost-format msgid "" "Please input valid values:\n" "Start value: >= %.1f\n" "End value: <= %.1f\n" "End value: > Start value\n" "Value step: >= %.3f" msgstr "" "Sartu balio baliodunak:\n" "Hasierako balioa: >= %.1f\n" "Amaierako balioa: <= %.1f\n" "Amaierako balioa: > Hasierako balioa\n" "Balio-urratsa: >= %.3f" msgid "The name cannot be empty." msgstr "Izena ezin da hutsik egon." #, c-format, boost-format msgid "The selected preset: %s was not found." msgstr "Hautatutako aurrezarpena ez da aurkitu: %s." msgid "The name cannot be the same as the system preset name." msgstr "Izena ezin da sistemaren aurrezarpenaren izen bera izan." msgid "The name is the same as another existing preset name" msgstr "Izena lehendik dagoen beste aurrezarpen baten izen bera da" msgid "create new preset failed." msgstr "aurrezarpen berria sortzeak huts egin du." #, c-format, boost-format msgid "Could not find parameter: %s." msgstr "Ezin izan da parametroa aurkitu: %s." msgid "Are you sure to cancel the current calibration and return to the home page?" msgstr "Ziur uneko kalibrazioa bertan behera utzi eta hasierako orrira itzuli nahi duzula?" msgid "No Printer Connected!" msgstr "Ez dago inprimagailurik konektatuta!" msgid "Printer is not connected yet." msgstr "Inprimagailua ez dago oraindik konektatuta." msgid "Please select filament to calibrate." msgstr "Hautatu kalibratu beharreko filamentua." msgid "The input value size must be 3." msgstr "Sarrerako balioaren tamainak 3 izan behar du." msgid "" "This machine type can only hold 16 historical results per nozzle. You can delete the existing historical results and then start calibration. Or you can continue the calibration, but you cannot create new calibration historical results.\n" "Do you still want to continue the calibration?" msgstr "" "Makina mota honek pita bakoitzeko 16 emaitza historiko soilik gorde ditzake. Lehendik dauden emaitzak ezabatu eta kalibrazioa hasi dezakezu. Bestela, kalibrazioarekin jarrai dezakezu, baina ezin izango duzu emaitza historiko berririk sortu.\n" "Hala ere kalibrazioarekin jarraitu nahi duzu?" #, c-format, boost-format msgid "Only one of the results with the same name: %s will be saved. Are you sure you want to override the other results?" msgstr "Izen bereko emaitzetako bat soilik gordeko da: %s. Ziur beste emaitzak gainidatzi nahi dituzula?" #, c-format, boost-format msgid "There is already a previous calibration result with the same name: %s. Only one result with a name is saved. Are you sure you want to overwrite the previous result?" msgstr "Badago izen bereko aurreko kalibrazio-emaitza bat: %s. Izen bakoitzeko emaitza bakarra gordetzen da. Ziur aurreko emaitza gainidatzi nahi duzula?" #, c-format, boost-format msgid "" "Within the same extruder, the name(%s) must be unique when the filament type, nozzle diameter, and nozzle flow are the same.\n" "Are you sure you want to override the historical result?" msgstr "" "Estrusore berean, izenak (%s) bakarra izan behar du filamentuen mota, pitaren diametroa eta pitaren fluxua berdinak direnean.\n" "Ziur zaude aurreko emaitza gainidatzi nahi duzula?" #, c-format, boost-format msgid "This machine type can only hold %d historical results per nozzle. This result will not be saved." msgstr "Makina mota honek pita bakoitzeko %d emaitza historiko soilik gorde ditzake. Emaitza hau ez da gordeko." msgid "Connecting to printer..." msgstr "Inprimagailura konektatzen..." msgid "The failed test result has been dropped." msgstr "Huts egindako probaren emaitza baztertu da." msgid "Flow Dynamics Calibration result has been saved to the printer." msgstr "Fluxu-dinamikaren kalibrazioaren emaitza inprimagailuan gorde da." msgid "Internal Error" msgstr "Barne-errorea" msgid "Please select at least one filament for calibration" msgstr "Hautatu gutxienez filamentu bat kalibratzeko" msgid "Flow rate calibration result has been saved to preset." msgstr "Fluxu-tasaren kalibrazioaren emaitza aurrezarpenean gorde da." msgid "Max volumetric speed calibration result has been saved to preset." msgstr "Gehieneko abiadura bolumetrikoaren kalibrazioaren emaitza aurrezarpenean gorde da." msgid "When do you need Flow Dynamics Calibration" msgstr "Fluxu-Dinamikak kalibratu behar dituzunean" msgid "" "We now have added the auto-calibration for different filaments, which is fully automated and the result will be saved into the printer for future use. You only need to do the calibration in the following limited cases:\n" "1. If you introduce a new filament of different brands/models or the filament is damp;\n" "2. If the nozzle is worn out or replaced with a new one;\n" "3. If the max volumetric speed or print temperature is changed in the filament setting." msgstr "" "Filamentu desberdinetarako kalibrazio automatikoa gehitu dugu. Prozesua erabat automatikoa da eta emaitza inprimagailuan gordetzen da etorkizunean erabiltzeko. Kalibrazioa kasu hauetan bakarrik egin behar duzu:\n" "1. Marka edo modelo desberdineko filamentua erabiltzen hasten bazara, edo filamentua hezea badago;\n" "2. Pita higatuta badago edo berri batekin ordeztu bada;\n" "3. Filamentu-ezarpenetako gehieneko abiadura bolumetrikoa edo inprimatze-tenperatura aldatu bada." msgid "About this calibration" msgstr "Kalibrazio honi buruz" msgid "" "Please find the details of Flow Dynamics Calibration from our wiki.\n" "\n" "Usually the calibration is unnecessary. When you start a single color/material print, with the \"flow dynamics calibration\" option checked in the print start menu, the printer will follow the old way, calibrate the filament before the print; When you start a multi color/material print, the printer will use the default compensation parameter for the filament during every filament switch which will have a good result in most cases.\n" "\n" "Please note that there are a few cases that can make the calibration results unreliable, such as insufficient adhesion on the build plate. Improving adhesion can be achieved by washing the build plate or applying glue. For more information on this topic, please refer to our Wiki.\n" "\n" "The calibration results have about 10 percent jitter in our test, which may cause the result not exactly the same in each calibration. We are still investigating the root cause to do improvements with new updates." msgstr "" "Ikusi fluxu-dinamikaren kalibrazioaren xehetasunak gure wikian.\n" "\n" "Normalean kalibrazioa ez da beharrezkoa. Kolore/material bakarreko inprimaketa bat hasten duzunean, inprimaketa hasteko menuan \"fluxu-dinamikaren kalibrazioa\" aukera markatuta badago, inprimagailuak modu zaharrari jarraituko dio eta filamentua kalibratuko du inprimatu aurretik; kolore/material anitzeko inprimaketa bat hasten duzunean, inprimagailuak filamentuaren konpentsazio-parametro lehenetsia erabiliko du filamentu-aldaketa bakoitzean, eta kasu gehienetan emaitza ona emango du.\n" "\n" "Kontuan izan badirela kalibrazio-emaitzak fidagarriak ez izatea eragin dezaketen zenbait kasu, hala nola inprimatze-plakaren itsaspen eskasa. Itsaspena hobetzeko, inprimatze-plaka garbitu edo kola aplika daiteke. Gai honi buruzko informazio gehiago lortzeko, jo gure Wikira.\n" "\n" "Gure probetan kalibrazio-emaitzek %10 inguruko aldakortasuna dute; horrek eragin dezake kalibrazio bakoitzean emaitza ez izatea zehazki berdina. Oraindik kausa nagusia ikertzen ari gara eguneraketa berriekin hobekuntzak egiteko." msgid "When to use Flow Rate Calibration" msgstr "Noiz erabili fluxu-tasaren kalibrazioa" msgid "" "After using Flow Dynamics Calibration, there might still be some extrusion issues, such as:\n" "1. Over-Extrusion: Excess material on your printed object, forming blobs or zits, or the layers seem thicker than expected and not uniform\n" "2. Under-Extrusion: Very thin layers, weak infill strength, or gaps in the top layer of the model, even when printing slowly\n" "3. Poor Surface Quality: The surface of your prints seems rough or uneven\n" "4. Weak Structural Integrity: Prints break easily or don't seem as sturdy as they should be" msgstr "" "Fluxu-dinamikaren kalibrazioa erabili ondoren ere estrusio-arazo batzuk egon daitezke, adibidez:\n" "1. Gain-estrusioa: material gehiegi inprimatutako objektuan, tantak edo pikorrak sortuz, edo geruzak espero baino lodiagoak eta ez uniformea dirudite\n" "2. Azpi-estrusioa: geruza oso meheak, betegarriaren erresistentzia ahula edo tarteak modeloaren goiko geruzan, poliki inprimatuta ere\n" "3. Gainazal-kalitate eskasa: inprimaketen gainazala latza edo irregularra dirudi\n" "4. Egiturazko sendotasun ahula: inprimaketak erraz hausten dira edo ez dirudite behar bezain sendoak" msgid "In addition, Flow Rate Calibration is crucial for foaming materials like LW-PLA used in RC planes. These materials expand greatly when heated, and calibration provides a useful reference flow rate." msgstr "Horrez gain, fluxu-tasaren kalibrazioa funtsezkoa da RC hegazkinetan erabiltzen den LW-PLA bezalako material apargarrietarako. Material horiek asko hedatzen dira berotzean, eta kalibrazioak erreferentziazko fluxu-tasa erabilgarria ematen du." msgid "Flow Rate Calibration measures the ratio of expected to actual extrusion volumes. The default setting works well in Bambu Lab printers and official filaments as they were pre-calibrated and fine-tuned. For a regular filament, you usually won't need to perform a Flow Rate Calibration unless you still see the listed defects after you have done other calibrations. For more details, please check out the wiki article." msgstr "Fluxu-tasaren kalibrazioak espero den estrusio-bolumenaren eta benetako estrusio-bolumenaren arteko erlazioa neurtzen du. Ezarpen lehenetsiak ondo funtzionatzen du Bambu Lab inprimagailuetan eta filamentu ofizialetan, aurrez kalibratuta eta doituak baitaude. Filamentu arrunt batekin, normalean ez duzu fluxu-tasaren kalibraziorik egin beharko, beste kalibrazio batzuk egin ondoren zerrendatutako akatsak oraindik ikusten ez badituzu. Xehetasun gehiagorako, ikusi wiki-artikulua." # AI Translated msgid "" "Auto Flow Rate Calibration utilizes Bambu Lab's Micro-Lidar technology, directly measuring the calibration patterns. However, please be advised that the efficacy and accuracy of this method may be compromised with specific types of materials. Particularly, filaments that are transparent or semi-transparent, have sparkles, or have a highly-reflective finish may not be suitable for this calibration and can produce less-than-desirable results.\n" "\n" "The calibration results may vary between each calibration or filament. We are still improving the accuracy and compatibility of this calibration through firmware updates over time.\n" "\n" "Caution: Flow Rate Calibration is an advanced process, to be attempted only by those who fully understand its purpose and implications. Incorrect usage can lead to sub-par prints or printer damage. Please make sure to carefully read and understand the process before doing it." msgstr "" "Fluxu-tasaren kalibrazio automatikoak Bambu Lab-en Micro-Lidar teknologia erabiltzen du kalibrazio-patroiak zuzenean neurtzeko. Hala ere, metodoaren eraginkortasuna eta zehaztasuna material mota batzuekin murriztu daitezke. Filamentu garden edo erdi-gardenak, distiratsuak edo oso islatzaileak ez dira egokiak eta emaitza eskasagoak eman ditzakete.\n" "\n" "Emaitzak kalibrazio eta filamentuen arabera alda daitezke. Firmware-eguneraketen bidez zehaztasuna eta bateragarritasuna hobetzen jarraitzen dugu.\n" "\n" "Kontuz: fluxu-tasaren kalibrazioa prozesu aurreratua da eta helburua eta ondorioak ondo ulertzen dituztenek soilik egin behar dute. Erabilera okerrak inprimaketa txarrak edo inprimagailuaren kalteak eragin ditzake. Irakurri eta ulertu prozesua arretaz egin aurretik." msgid "When you need Max Volumetric Speed Calibration" msgstr "Abiadura bolumetriko maximoa kalibratu behar duzunean" msgid "Over-extrusion or under extrusion" msgstr "Gain-estrusioa edo azpi-estrusioa" msgid "Max Volumetric Speed calibration is recommended when you print with:" msgstr "Gehieneko abiadura bolumetrikoaren kalibrazioa gomendatzen da hauekin inprimatzen duzunean:" msgid "material with significant thermal shrinkage/expansion, such as..." msgstr "uzkurtze/hedatze termiko handia duen materiala, hala nola..." msgid "materials with inaccurate filament diameter" msgstr "filamentu-diametro zehaztugabea duten materialak" msgid "We found the best Flow Dynamics Calibration Factor" msgstr "Fluxu-dinamikaren kalibrazio-faktorerik onena aurkitu dugu" msgid "Part of the calibration failed! You may clean the plate and retry. The failed test result would be dropped." msgstr "Kalibrazioaren zati batek huts egin du! Plaka garbitu eta berriro saia zaitezke. Huts egindako probaren emaitza baztertuko da." msgid "*We recommend you to add brand, materia, type, and even humidity level in the Name" msgstr "*Izenean marka, materiala, mota eta hezetasun-maila ere gehitzea gomendatzen dizugu" msgid "Please enter the name you want to save to printer." msgstr "Sartu inprimagailuan gorde nahi duzun izena." msgid "The name cannot exceed 40 characters." msgstr "Izenak ezin ditu 40 karaktere baino gehiago izan." msgid "Nozzle ID" msgstr "Pitaren IDa" msgid "Standard Flow" msgstr "Fluxu estandarra" msgid "Please find the best line on your plate" msgstr "Bilatu plakako lerrorik onena" msgid "Please find the corner with the perfect degree of extrusion" msgstr "Aurkitu estrusio-maila perfektua duen izkina" msgid "Input Value" msgstr "Sarrerako balioa" msgid "Save to Filament Preset" msgstr "Gorde filamentu-aurrezarpenean" msgid "Record Factor" msgstr "Erregistratu faktorea" msgid "We found the best flow ratio for you" msgstr "Zuretzat fluxu-erlaziorik onena aurkitu dugu" msgid "Flow Ratio" msgstr "Fluxu-erlazioa" msgid "Please input a valid value (0.0 < flow ratio < 2.0)" msgstr "Sartu balio baliodun bat (0.0 < fluxu-erlazioa < 2.0)" msgid "Please enter the name of the preset you want to save." msgstr "Sartu gorde nahi duzun aurrezarpenaren izena." msgid "Calibration1" msgstr "Kalibrazioa1" msgid "Calibration2" msgstr "Kalibrazioa2" msgid "Please find the best object on your plate" msgstr "Bilatu plakako objekturik onena" msgid "Fill in the value above the block with smoothest top surface" msgstr "Bete goiko gainazalik leunena duen blokearen gaineko balioa" msgid "Skip Calibration2" msgstr "Saltatu Kalibrazioa2" #, c-format, boost-format msgid "flow ratio : %s " msgstr "fluxu-erlazioa: %s " msgid "Please choose a block with smoothest top surface." msgstr "Hautatu goiko gainazalik leunena duen blokea." msgid "Please input a valid value (0 <= Max Volumetric Speed <= 60)" msgstr "Sartu balio baliodun bat (0 <= Gehieneko abiadura bolumetrikoa <= 60)" msgid "Calibration Type" msgstr "Kalibrazio mota" msgid "Complete Calibration" msgstr "Kalibrazio osoa" msgid "Fine Calibration based on flow ratio" msgstr "Fluxu-erlazioan oinarritutako kalibrazio fina" msgid "Title" msgstr "Izenburua" msgid "A test model will be printed. Please clear the build plate and place it back to the hot bed before calibration." msgstr "Proba-modelo bat inprimatuko da. Hustu inprimatze-plaka eta jarri berriro ohe beroan kalibratu aurretik." msgid "Printing Parameters" msgstr "Inprimatze-parametroak" msgid "- ℃" msgstr "- ℃" msgid "Synchronize nozzle and AMS information" msgstr "Sinkronizatu pitaren eta AMSren informazioa" msgid "Please connect the printer first before synchronizing." msgstr "Konektatu inprimagailua sinkronizatu aurretik." #, c-format, boost-format msgid "Printer %s nozzle information has not been set. Please configure it before proceeding with the calibration." msgstr "%s inprimagailuaren pitaren informazioa ez da ezarri. Konfiguratu kalibrazioarekin jarraitu aurretik." msgid "AMS and nozzle information are synced" msgstr "AMSaren eta pitaren informazioa sinkronizatuta dago" msgid "Nozzle Flow" msgstr "Pitaren fluxua" msgid "Filament position" msgstr "Filamentuaren kokapena" msgid "Filament For Calibration" msgstr "Kalibratzeko filamentua" msgid "" "Tips for calibration material:\n" "- Materials that can share same hot bed temperature\n" "- Different filament brand and family (Brand = Bambu, Family = Basic, Matte)" msgstr "" "Kalibrazio-materialerako aholkuak:\n" "- Ohe beroaren tenperatura bera parteka dezaketen materialak\n" "- Filamentu marka eta familia desberdinak (Marka = Bambu, Familia = Basic, Matte)" msgid "Pattern" msgstr "Patroia" msgid "Method" msgstr "Metodoa" #, c-format, boost-format msgid "%s is not compatible with %s" msgstr "%s ez da bateragarria %s(r)ekin" msgid "TPU is not supported for Flow Dynamics Auto-Calibration." msgstr "TPUa ez da onartzen fluxu-dinamikaren kalibrazio automatikoan." msgid "Selected nozzle temperatures are incompatible. For multi-material printing, each filament's nozzle temperature must be within the recommended nozzle temperature range of the other filaments. Otherwise, nozzle clogging or printer damage may occur." msgstr "Hautatutako piten tenperaturak bateraezinak dira. Material anitzeko inprimaketan, filamentuen bakoitzaren pitaren tenperaturak gainerako filamentuen gomendatutako pitaren tenperatura-tartearen barruan egon behar du. Bestela, pita buxatu edo inprimagailua kaltetu daiteke." msgid "Sync AMS and nozzle information" msgstr "Sinkronizatu AMSren eta pitaren informazioa" msgid "Calibration only supports cases where the left and right nozzle diameters are identical." msgstr "Kalibrazioak ezkerreko eta eskuineko piten diametroak berdinak diren kasuak soilik onartzen ditu." msgid "From k Value" msgstr "k baliotik" msgid "To k Value" msgstr "k baliora" msgid "Step value" msgstr "Urrats-balioa" msgid "The nozzle diameter has been synchronized from the printer Settings" msgstr "Pitaren diametroa inprimagailuaren ezarpenetatik sinkronizatu da" msgid "From Volumetric Speed" msgstr "Abiadura bolumetrikotik" msgid "To Volumetric Speed" msgstr "Abiadura bolumetrikora" msgid "Are you sure you want to cancel this print?" msgstr "Ziur zaude inprimaketa hau bertan behera utzi nahi duzula?" msgid "Flow Dynamics Calibration Result" msgstr "Fluxu-dinamikaren kalibrazioaren emaitza" msgid "New" msgstr "Berria" msgid "No History Result" msgstr "Ez dago emaitza historikorik" msgid "Success to get history result" msgstr "Emaitza historikoa ondo eskuratu da" msgid "Refreshing the previous Flow Dynamics Calibration records" msgstr "Aurreko Fluxu-dinamikaren kalibrazio-erregistroak freskatzen" #, c-format, boost-format msgid "Note: The hotend number on the %s is tied to the holder. When the hotend is moved to a new holder, its number will update automatically." msgstr "Oharra: %s gailuko hotendaren zenbakia euskarriari lotuta dago. Hotenda euskarri berri batera mugitzen denean, haren zenbakia automatikoki eguneratuko da." msgid "Action" msgstr "Ekintza" #, c-format, boost-format msgid "This machine type can only hold %d historical results per nozzle." msgstr "Makina mota honek pita bakoitzeko %d emaitza historiko soilik gorde ditzake." msgid "Edit Flow Dynamics Calibration" msgstr "Editatu fluxu-dinamikaren kalibrazioa" #, c-format, boost-format msgid "Within the same extruder, the name '%s' must be unique when the filament type, nozzle diameter, and nozzle flow are identical. Please choose a different name." msgstr "Estrusore berean, '%s' izenak bakarra izan behar du filamentuen mota, pitaren diametroa eta pitaren fluxua berdinak direnean. Hautatu beste izen bat." msgid "New Flow Dynamic Calibration" msgstr "Fluxu-dinamikaren kalibrazio berria" msgid "The filament must be selected." msgstr "Filamentua hautatu behar da." msgid "The extruder must be selected." msgstr "Estrusorea hautatu behar da." msgid "The nozzle must be selected." msgstr "Pita hautatu behar da." msgid "Network lookup" msgstr "Sareko bilaketa" msgid "Address" msgstr "Helbidea" msgid "Hostname" msgstr "Ostalari-izena" msgid "Service name" msgstr "Zerbitzu-izena" msgid "OctoPrint version" msgstr "OctoPrint bertsioa" msgid "Searching for devices" msgstr "Gailuak bilatzen" msgid "Finished" msgstr "Amaituta" msgid "Multiple resolved IP addresses" msgstr "Ebatzitako IP helbide anitz" #, boost-format msgid "" "There are several IP addresses resolving to hostname %1%.\n" "Please select one that should be used." msgstr "" "Hainbat IP helbide ebazten dira %1% ostalari-izenerako.\n" "Hautatu erabili beharrekoa." # AI Translated msgid "Auto-scale for nozzle" msgstr "Eskalatze automatikoa pitarako" # AI Translated msgid "" "This model is designed around a 0.4 mm nozzle with a 0.2 mm layer height. \n" "When the scaling option is enabled (recommended), it dynamically resizes to match your current nozzle diameter and an appropriate layer height, making the test both accurate and easy to read.\n" "Turn scaling off only if you wish to print the reference model exactly as-is." msgstr "" "Modelo hau 0,4 mm-ko pita eta 0,2 mm-ko geruza-altuera kontuan hartuta diseinatu da. \n" "Eskalatze-aukera gaituta dagoenean (gomendatua), tamaina dinamikoki egokitzen zaie zure uneko pita-diametroari eta geruza-altuera egoki bati, testa zehatza eta irakurterraza izan dadin.\n" "Itzali eskalatzea erreferentzia-modeloa dagoen-dagoenean inprimatu nahi baduzu bakarrik." msgid "PA Calibration" msgstr "PA kalibrazioa" msgid "Extruder type" msgstr "Estrusore mota" msgid "DDE" msgstr "DDE" msgid "PA Tower" msgstr "PA dorrea" msgid "PA Line" msgstr "PA lerroa" # AI Translated msgid "PA Pattern" msgstr "PA patroia" msgid "Start PA: " msgstr "Hasierako PA: " msgid "End PA: " msgstr "Amaierako PA: " msgid "PA step: " msgstr "PA urratsa: " msgid "Accelerations: " msgstr "Azelerazioak: " msgid "Speeds: " msgstr "Abiadurak: " msgid "Print numbers" msgstr "Inprimatu zenbakiak" msgid "Comma-separated list of printing accelerations" msgstr "Komaz bereizitako inprimatze-azelerazioen zerrenda" msgid "Comma-separated list of printing speeds" msgstr "Komaz bereizitako inprimatze-abiaduren zerrenda" msgid "" "Please input valid values:\n" "Start PA: >= 0.0\n" "End PA: > Start PA\n" "PA step: >= 0.001" msgstr "" "Sartu balio baliodunak:\n" "Hasierako PA: >= 0.0\n" "Amaierako PA: > Hasierako PA\n" "PA urratsa: >= 0.001" msgid "" "Acceleration values must be greater than speed values.\n" "Please verify the inputs." msgstr "" "Azelerazio-balioek abiadura-balioek baino handiagoak izan behar dute.\n" "Egiaztatu sarrerak." msgid "Temperature calibration" msgstr "Tenperaturaren kalibrazioa" msgid "Filament type" msgstr "Filamentu mota" msgid "PLA" msgstr "PLA" msgid "ABS/ASA" msgstr "ABS/ASA" msgid "PETG" msgstr "PETG" msgid "PCTG" msgstr "PCTG" msgid "TPU" msgstr "TPU" msgid "PA-CF" msgstr "PA-CF" msgid "PET-CF" msgstr "PET-CF" msgid "Start temp: " msgstr "Hasierako tenp.: " msgid "End temp: " msgstr "Amaierako tenp.: " msgid "Temp step: " msgstr "Tenp. urratsa: " msgid "" "Please input valid values:\n" "Start temp: <= 500\n" "End temp: >= 155\n" "Start temp >= End temp + 5" msgstr "" "Sartu balio baliodunak:\n" "Hasierako tenperatura: <= 500\n" "Amaierako tenperatura: >= 155\n" "Hasierako tenperatura >= Amaierako tenperatura + 5" msgid "Max volumetric speed test" msgstr "Gehieneko abiadura bolumetrikoaren proba" msgid "Start volumetric speed: " msgstr "Hasierako abiadura bolumetrikoa: " msgid "End volumetric speed: " msgstr "Amaierako abiadura bolumetrikoa: " msgid "" "Please input valid values:\n" "start > 0\n" "step >= 0\n" "end > start + step" msgstr "" "Sartu balio baliodunak:\n" "hasiera > 0\n" "urratsa >= 0\n" "amaiera > hasiera + urratsa" msgid "VFA test" msgstr "VFA proba" msgid "Start speed: " msgstr "Hasierako abiadura: " msgid "End speed: " msgstr "Amaierako abiadura: " # AI Translated msgid "Auto-adjust to max volumetric speed" msgstr "Doikuntza automatikoa abiadura bolumetriko maximora" # AI Translated msgid "If the end speed would exceed the filament's maximum volumetric speed, automatically lower the layer height (keeping standard values and staying within the machine's limits) to reach it. If even the minimum layer height is not enough, lower the end speed instead." msgstr "Amaierako abiadurak filamentuaren abiadura bolumetriko maximoa gaindituko balu, geruza-altuera automatikoki jaisten da (balio estandarrak mantenduz eta makinaren mugen barruan) hura lortzeko. Gutxieneko geruza-altuerarekin ere nahikoa ez bada, amaierako abiadura jaisten da haren ordez." msgid "" "Please input valid values:\n" "start > 10\n" "step >= 0\n" "end > start + step" msgstr "" "Sartu balio baliodunak:\n" "hasiera > 10\n" "urratsa >= 0\n" "amaiera > hasiera + urratsa" # AI Translated #, c-format, boost-format msgid "" "The end speed (%.0f mm/s) exceeds the filament's maximum volumetric speed (%.1f mm³/s), which limits the outer wall to about %.0f mm/s at this line width and layer height.\n" " Speeds above this will be clamped, so the upper blocks of the tower will not print at the requested speed.\n" "\n" "%s" msgstr "" "Amaierako abiadurak (%.0f mm/s) filamentuaren abiadura bolumetriko maximoa (%.1f mm³/s) gainditzen du, eta horrek kanpoko horma gutxi gorabehera %.0f mm/s-ra mugatzen du lerro-zabalera eta geruza-altuera honekin.\n" " Horren gaineko abiadurak mugatu egingo dira, beraz dorrearen goiko blokeak ez dira eskatutako abiaduran inprimatuko.\n" "\n" "%s" # AI Translated #, c-format, boost-format msgid "" "The end speed (%.0f mm/s) exceeds the filament's maximum volumetric speed (%.1f mm³/s) at the default layer height (%.2f mm).\n" "\n" "The layer height has been reduced to %.2f mm (a value used by this printer's profiles) so the tower can reach the requested speed." msgstr "" "Amaierako abiadurak (%.0f mm/s) filamentuaren abiadura bolumetriko maximoa (%.1f mm³/s) gainditzen du geruza-altuera lehenetsian (%.2f mm).\n" "\n" "Geruza-altuera %.2f mm-ra jaitsi da (inprimagailu honen aurrezarpenek erabiltzen duten balio bat), dorreak eskatutako abiadura lor dezan." # AI Translated #, c-format, boost-format msgid "" "Even at the smallest layer height used by this printer's profiles (%.2f mm) the end speed (%.0f mm/s) exceeds the filament's maximum volumetric speed (%.1f mm³/s).\n" "\n" "The layer height will be set to %.2f mm and the end speed lowered to %.0f mm/s.\n" "\n" "Continue?" msgstr "" "Inprimagailu honen aurrezarpenek erabiltzen duten geruza-altuera txikienarekin ere (%.2f mm), amaierako abiadurak (%.0f mm/s) filamentuaren abiadura bolumetriko maximoa (%.1f mm³/s) gainditzen du.\n" "\n" "Geruza-altuera %.2f mm-ra ezarriko da eta amaierako abiadura %.0f mm/s-ra jaitsiko da.\n" "\n" "Jarraitu?" # AI Translated msgid "Continue anyway?" msgstr "Hala ere jarraitu?" # AI Translated msgid "Enable \"Auto-adjust\" to fix this automatically, or continue anyway?" msgstr "Gaitu \"Doikuntza automatikoa\" hau automatikoki konpontzeko, edo hala ere jarraitu?" # AI Translated msgid "Enable \"Auto-scale for nozzle\" and \"Auto-adjust\" to fix this automatically, or continue anyway?" msgstr "Gaitu \"Eskalatze automatikoa pitarako\" eta \"Doikuntza automatikoa\" hau automatikoki konpontzeko, edo hala ere jarraitu?" msgid "Start retraction length: " msgstr "Hasierako atzera-egite luzera: " msgid "End retraction length: " msgstr "Amaierako atzera-egite luzera: " msgid "Input shaping Frequency test" msgstr "Sarrera-moldaketaren maiztasun-proba" msgid "Test model" msgstr "Proba-modeloa" msgid "Ringing Tower" msgstr "Erresonantzia dorrea" msgid "Fast Tower" msgstr "Dorre azkarra" msgid "Please ensure the selected type is compatible with your firmware version." msgstr "Ziurtatu hautatutako mota zure firmware-bertsioarekin bateragarria dela." msgid "" "Marlin version => 2.1.2\n" "Fixed-Time motion not yet implemented." msgstr "" "Marlin bertsioa => 2.1.2\n" "Denbora finkoko mugimendua ez dago oraindik inplementatuta." msgid "Klipper version => 0.9.0" msgstr "Klipper bertsioa => 0.9.0" msgid "" "RepRap firmware version => 3.4.0\n" "Check your firmware documentation for supported shaper types." msgstr "" "RepRap firmwarearen bertsioa => 3.4.0\n" "Begiratu zure firmwarearen dokumentazioa onartutako moldatzaile motak ezagutzeko." msgid "Frequency (Start / End): " msgstr "Maiztasuna (hasiera / amaiera): " msgid "Start / End" msgstr "Hasiera / Amaiera" msgid "Frequency settings" msgstr "Maiztasun-ezarpenak" msgid "RepRap firmware uses the same frequency range for both axes." msgstr "RepRap firmwareak maiztasun-tarte bera erabiltzen du bi ardatzetarako." msgid "Damp: " msgstr "Moteltzea: " msgid "" "Recommended: Set Damp to 0.\n" "This will use the printer's default or saved value." msgstr "" "Gomendioa: ezarri moteltzea 0 balioan.\n" "Horrela, inprimagailuaren balio lehenetsia edo gordetakoa erabiliko da." msgid "" "Please input valid values:\n" "(0 < FreqStart < FreqEnd < 500)" msgstr "" "Sartu baliozko balioak:\n" "(0 < FreqStart < FreqEnd < 500)" msgid "Please input a valid damping factor (0 < Damping/zeta factor <= 1)" msgstr "Sartu baliozko moteltze-faktore bat (0 < moteltze/zeta faktorea <= 1)" msgid "Input shaping Damp test" msgstr "Sarrera-moldaketaren moteltze-proba" msgid "Check firmware compatibility." msgstr "Egiaztatu firmwarearen bateragarritasuna." msgid "Frequency: " msgstr "Maiztasuna: " msgid "Damp" msgstr "Moteltzea" msgid "RepRap firmware uses the same frequency for both axes." msgstr "RepRap firmwareak maiztasun bera erabiltzen du bi ardatzetarako." msgid "Note: Use previously calculated frequencies." msgstr "Oharra: erabili aurrez kalkulatutako maiztasunak." msgid "" "Please input valid values:\n" "(0 < Freq < 500)" msgstr "" "Sartu baliozko balioak:\n" "(0 < Freq < 500)" msgid "Please input a valid damping factor (0 <= DampingStart < DampingEnd <= 1)" msgstr "Sartu baliozko moteltze-faktore bat (0 <= DampingStart < DampingEnd <= 1)" msgid "Cornering test" msgstr "Kurbatze-proba" msgid "SCV-V2" msgstr "SCV-V2" msgid "Start: " msgstr "Hasiera: " msgid "End: " msgstr "Amaiera: " msgid "Cornering settings" msgstr "Izkinetako mugimenduaren ezarpenak" msgid "Note: Lower values = sharper corners but slower speeds." msgstr "Oharra: balio txikiagoek izkina zorrotzagoak ematen dituzte, baina abiadura motelagoetan." msgid "" "Marlin 2 Junction Deviation detected:\n" "To test Classic Jerk, set 'Maximum Junction Deviation' in Motion ability to 0." msgstr "" "Marlin 2 Lotura-desbideratzea detektatu da:\n" "Classic Jerk probatzeko, ezarri Mugimendu-gaitasuneko 'Lotura-desbideratze maximoa' 0 balioan." msgid "" "Marlin 2 Classic Jerk detected:\n" "To test Junction Deviation, set 'Maximum Junction Deviation' in Motion ability to a value > 0." msgstr "" "Marlin 2 Classic Jerk detektatu da:\n" "Lotura-desbideratzea probatzeko, ezarri Mugimendu-gaitasuneko 'Lotura-desbideratze Maximoa' 0 baino handiagoa den balio batean." msgid "" "RepRap detected: Jerk in mm/s.\n" "OrcaSlicer will convert the values to mm/min when necessary." msgstr "" "RepRap detektatu da: jerk-a mm/s-tan.\n" "OrcaSlicer-ek balioak mm/min-era bihurtuko ditu beharrezkoa denean." #, c-format, boost-format msgid "" "Please input valid values:\n" "(0 <= Cornering <= %s)" msgstr "" "Sartu balio zuzenak:\n" "(0 <= izkinetako mugimendua <= %s)" #, c-format, boost-format msgid "NOTE: High values may cause Layer shift (>%s)" msgstr "OHARRA: balio handiek geruza-desplazamendua eragin dezakete (>%s)" msgid "Flow Ratio Calibration" msgstr "Fluxu-erlazioaren kalibrazioa" msgid "Calibration Test Type" msgstr "Kalibrazio-probaren mota" msgid "Pass 1 (Coarse)" msgstr "1. pasaldia (lodia)" msgid "Pass 2 (Fine)" msgstr "2. pasaldia (fina)" msgid "YOLO (Recommended)" msgstr "YOLO (gomendatua)" msgid "YOLO (Perfectionist)" msgstr "YOLO (perfekzionista)" # AI Translated msgid "Top Surface Pattern" msgstr "Goiko gainazalaren patroia" msgid "Choose a slot for the selected color" msgstr "Aukeratu zirrikitu bat hautatutako kolorearentzat" msgid "Material in the material station" msgstr "Material-estazioko materiala" msgid "Only materials of the same type can be selected." msgstr "Mota bereko materialak bakarrik hauta daitezke." msgid "Send G-code to printer host" msgstr "Bidali G-codea inprimagailuaren ostalarira" msgid "Upload to Printer Host with the following filename:" msgstr "Kargatu inprimagailuaren ostalarira fitxategi-izen honekin:" msgid "Use forward slashes ( / ) as a directory separator if needed." msgstr "Erabili barra arruntak ( / ) direktorio-bereizle gisa behar izanez gero." msgid "Upload to storage" msgstr "Kargatu biltegiratze-gailura" msgid "Switch to Device tab after upload." msgstr "Aldatu Gailua fitxara kargatu ondoren." #, c-format, boost-format msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?" msgstr "Kargatzeko fitxategi-izena ez da \"%s\"rekin amaitzen. Jarraitu nahi duzu?" msgid "Upload" msgstr "Kargatu" msgid "Leveling before print" msgstr "Inprimatu aurretik nibelatzea" msgid "Time-lapse" msgstr "Time-lapsea" msgid "Enable IFS" msgstr "Gaitu IFS" #, c-format, boost-format msgid "Detected %d IFS slots on printer." msgstr "%d IFS zirrikitu detektatu dira inprimagailuan." msgid "This printer does not report a material station." msgstr "Inprimagailu honek ez du material-estaziorik jakinarazten." msgid "Unable to read IFS slots from printer." msgstr "Ezin dira inprimagailuko IFS zirrikituak irakurri." msgid "Loading IFS slots from printer..." msgstr "IFS zirrikituak inprimagailutik kargatzen..." msgid "Slice the plate first to get project material information." msgstr "Xerratu plaka lehenik proiektuaren materialari buruzko informazioa lortzeko." msgid "This plate uses multiple materials. Enable IFS and assign each tool to a printer slot." msgstr "Plaka honek hainbat material erabiltzen ditu. Gaitu IFS eta esleitu tresna bakoitza inprimagailuko zirrikitu bati." msgid "Each project material must be assigned to an IFS slot before printing." msgstr "Proiektuko material bakoitza IFS zirrikitu bati esleitu behar zaio inprimatu aurretik." msgid "Each project material must be assigned to a loaded IFS slot before printing." msgstr "Proiektuko material bakoitza kargatutako IFS zirrikitu bati esleitu behar zaio inprimatu aurretik." msgid "Each project material must match the material loaded in the selected IFS slot." msgstr "Proiektuko material bakoitzak hautatutako IFS zirrikituan kargatutako materialarekin bat etorri behar du." msgid "Print host upload queue" msgstr "Host-aren inprimatze-ilara" msgid "ID" msgstr "ID" msgid "Progress" msgstr "Aurrerapena" msgid "Host" msgstr "Ostalaria" msgctxt "OfFile" msgid "Size" msgstr "Tamaina" msgid "Filename" msgstr "Fitxategi-izena" msgid "Cancel selected" msgstr "Utzi hautatutakoa" msgid "Show error message" msgstr "Erakutsi errore-mezua" msgid "Queued" msgstr "Ilaran" msgid "Uploading" msgstr "Kargatzen" msgid "Canceling" msgstr "Bertan behera uzten" msgid "Error uploading to print host" msgstr "Errorea inprimatze-ostalarira kargatzean" msgid "The selected bed type does not match the file. Please confirm before starting the print." msgstr "Hautatutako ohe mota ez dator bat fitxategiarekin. Berretsi inprimatzen hasi aurretik." msgid "Heated Bed Leveling" msgstr "Ohe beroaren nibelatzea" msgid "Textured Build Plate (Side A)" msgstr "Testuradun inprimatze-plaka (A aldea)" msgid "Smooth Build Plate (Side B)" msgstr "Inprimatze-plaka leuna (B aldea)" #, c-format, boost-format msgid "Printer: %s" msgstr "Inprimagailua: %s" msgid "Calibrate before printing" msgstr "Kalibratu inprimatu aurretik" msgid "Filament Mapping:" msgstr "Filamentu-esleipena:" msgid "Unable to perform boolean operation on selected parts" msgstr "Ezin da eragiketa boolearra egin hautatutako piezetan" msgid "Mesh Boolean" msgstr "Sare boolearra" msgid "Union" msgstr "Batu" msgid "Difference" msgstr "Kenketa" msgid "Intersection" msgstr "Elkargunea" msgid "Source Volume" msgstr "Jatorrizko bolumena" msgid "Tool Volume" msgstr "Tresnaren bolumena" msgid "Subtract from" msgstr "Kendu hemendik" msgid "Subtract with" msgstr "Kendu honekin" msgid "selected" msgstr "hautatuta" msgid "Part 1" msgstr "1. pieza" msgid "Part 2" msgstr "2. pieza" msgid "Delete input" msgstr "Ezabatu sarrera" msgid "Network Test" msgstr "Sare-proba" msgid "Start Test Multi-Thread" msgstr "Hasi hari anitzeko proba" msgid "Start Test Single-Thread" msgstr "Hasi hari bakarreko proba" msgid "Export Log" msgstr "Esportatu erregistroa" msgid "OrcaSlicer Version:" msgstr "OrcaSlicer bertsioa:" msgid "System Version:" msgstr "Sistemaren bertsioa:" msgid "DNS Server:" msgstr "DNS zerbitzaria:" msgid "Test OrcaSlicer (GitHub)" msgstr "Probatu OrcaSlicer (GitHub)" msgid "Test OrcaSlicer (GitHub):" msgstr "Probatu OrcaSlicer (GitHub):" msgid "Test bing.com" msgstr "Probatu bing.com" msgid "Test bing.com:" msgstr "Probatu bing.com:" msgid "Log Info" msgstr "Erregistro-informazioa" msgid "Select filament preset" msgstr "Hautatu filamentu-aurrezarpena" msgid "Create Filament" msgstr "Sortu filamentua" msgid "Create Based on Current Filament" msgstr "Sortu uneko filamentuan oinarrituta" msgid "Copy Current Filament Preset " msgstr "Kopiatu uneko filamentu-aurrezarpena " msgid "Basic Information" msgstr "Oinarrizko informazioa" msgid "Add Filament Preset under this filament" msgstr "Gehitu filamentu-aurrezarpena filamentu honetan" msgid "We could create the filament presets for your following printer:" msgstr "Filamentu-aurrezarpenak sor ditzakegu hurrengo inprimagailuarentzat:" msgid "Select Vendor" msgstr "Hautatu fabrikatzailea" msgid "Input Custom Vendor" msgstr "Sartu fabrikatzaile pertsonalizatua" msgid "Can't find vendor I want" msgstr "Ez dut nahi dudan fabrikatzailea aurkitzen" msgid "Select Type" msgstr "Hautatu mota" msgid "Select Filament Preset" msgstr "Hautatu filamentu-aurrezarpena" msgid "Serial" msgstr "Seriea" msgid "e.g. Basic, Matte, Silk, Marble" msgstr "adib. Oinarrizkoa, Matea, Zeta, Marmola" msgid "Filament Preset" msgstr "Filamentu-aurrezarpena" msgid "Create" msgstr "Sortu" msgid "Vendor is not selected; please reselect vendor." msgstr "Ez da hornitzailerik hautatu; hautatu berriro." msgid "Custom vendor missing; please input custom vendor." msgstr "Hornitzaile pertsonalizatua falta da; sartu hornitzailea." msgid "\"Bambu\" or \"Generic\" cannot be used as a Vendor for custom filaments." msgstr "\"Bambu\" edo \"Generic\" ezin dira erabili filamentu pertsonalizatuen fabrikatzaile gisa." msgid "Filament type is not selected, please reselect type." msgstr "Ez da filamentu mota hautatu; hautatu berriro mota." msgid "Filament serial missing; please input serial." msgstr "Filamentuaren serie-zenbakia falta da; sartu serie-zenbakia." msgid "There may be disallowed characters in the vendor or serial input of the filament. Please delete and re-enter." msgstr "Baliteke filamentuko hornitzailearen edo serie-zenbakiaren eremuan onartzen ez diren karaktereak egotea. Ezabatu eta sartu berriro." msgid "All inputs in the custom vendor or serial are spaces. Please re-enter." msgstr "Fabrikatzaile pertsonalizatuan edo seriean sartutako guztia zuriuneak dira. Sartu berriro." msgid "The vendor cannot be a number; please re-enter." msgstr "Hornitzailea ezin da zenbaki bat izan; sartu berriro." msgid "You have not selected a printer or preset yet. Please select at least one." msgstr "Oraindik ez duzu inprimagailurik edo aurrezarpenik hautatu. Hautatu gutxienez bat." #, c-format, boost-format msgid "" "The Filament name %s you created already exists.\n" "If you continue, the preset created will be displayed with its full name. Do you want to continue?" msgstr "" "Sortu duzun %s filamentua badago lehendik.\n" "Jarraitzen baduzu, sortutako aurrezarpena izen osoarekin bistaratuko da. Jarraitu nahi duzu?" msgid "Some existing presets have failed to be created, as follows:\n" msgstr "Lehendik zeuden aurrezarpen batzuk ezin izan dira sortu, honela:\n" msgid "" "\n" "Do you want to rewrite it?" msgstr "" "\n" "Berridatzi nahi duzu?" msgid "" "We would rename the presets as \"Vendor Type Serial @printer you selected\".\n" "To add preset for more printers, please go to printer selection" msgstr "" "Aurrezarpenak \"Fabrikatzailea Mota Seriea @hautatutako inprimagailua\" gisa berrizendatuko ditugu.\n" "Inprimagailu gehiagorako aurrezarpenak gehitzeko, joan inprimagailuen hautaketara" msgid "Create Printer/Nozzle" msgstr "Sortu inprimagailua/pita" msgid "Create Printer" msgstr "Sortu inprimagailua" msgid "Create Nozzle for Existing Printer" msgstr "Sortu pita lehendik dagoen inprimagailuarentzat" msgid "Create from Template" msgstr "Sortu txantiloitik" msgid "Create Based on Current Printer" msgstr "Sortu uneko inprimagailuan oinarrituta" msgid "Import Preset" msgstr "Inportatu aurrezarpena" msgid "Create Type" msgstr "Sortu mota" msgid "The model was not found; please reselect vendor." msgstr "Ez da modeloa aurkitu; hautatu berriro hornitzailea." msgid "Select Printer" msgstr "Hautatu inprimagailua" msgid "Select Model" msgstr "Hautatu Modeloa" msgid "Input Custom Model" msgstr "Sartu modelo pertsonalizatua" msgid "Can't find my printer model" msgstr "Ez dut nire inprimagailu-modeloa aurkitzen" msgid "Input Custom Nozzle Diameter" msgstr "Sartu pitaren diametro pertsonalizatua" msgid "Can't find my nozzle diameter" msgstr "Ez dut nire pitaren diametroa aurkitzen" msgid "Printable Space" msgstr "Inprimatzeko eremua" msgid "Hot Bed STL" msgstr "Ohe beroaren STLa" msgid "Hot Bed SVG" msgstr "Ohe beroaren SVGa" msgid "Max Print Height" msgstr "Gehieneko inprimatze-altuera" #, c-format, boost-format msgid "The file exceeds %d MB, please import again." msgstr "Fitxategiak %d MB gainditzen ditu; inportatu berriro." msgid "Exception in obtaining file size, please import again." msgstr "Salbuespena fitxategiaren tamaina lortzean; inportatu berriro." msgid "Preset path was not found; please reselect vendor." msgstr "Ez da aurrezarpenaren bidea aurkitu; hautatu berriro hornitzailea." msgid "The printer model was not found, please reselect." msgstr "Ez da inprimagailu-modeloa aurkitu; hautatu berriro." msgid "The nozzle diameter was not found; please reselect." msgstr "Ez da pitaren diametroa aurkitu; hautatu berriro." msgid "The printer preset was not found; please reselect." msgstr "Ez da inprimagailuaren aurrezarpena aurkitu; hautatu berriro." msgid "Printer Preset" msgstr "Inprimagailu-aurrezarpena" msgid "Filament Preset Template" msgstr "Filamentu-aurrezarpenaren txantiloia" msgid "Process Preset Template" msgstr "Prozesu-aurrezarpenaren txantiloia" msgid "You have not yet chosen which printer preset to create based on. Please choose the vendor and model of the printer" msgstr "Oraindik ez duzu aukeratu zein inprimagailu-aurrezarpenetan oinarrituta sortu. Hautatu inprimagailuaren fabrikatzailea eta modeloa" msgid "You have entered a disallowed character in the printable area section on the first page. Please use only numbers." msgstr "Onartzen ez den karaktere bat sartu duzu lehen orriko eremu inprimagarriaren atalean. Erabili zenbakiak bakarrik." msgid "" "The printer preset you created already has a preset with the same name. Do you want to overwrite it?\n" "\tYes: Overwrite the printer preset with the same name, and filament and process presets with the same preset name will be recreated \n" "and filament and process presets without the same preset name will be reserved.\n" "\tCancel: Do not create a preset; return to the creation interface." msgstr "" "Sortu duzun inprimagailu-aurrezarpenak izen bereko beste aurrezarpen bat du. Gainidatzi nahi duzu?\n" "\tBai: gainidatzi izen bereko inprimagailu-aurrezarpena; izen bereko filamentuen eta prozesuen aurrezarpenak berriro sortuko dira,\n" "eta izen desberdineko filamentuen eta prozesuen aurrezarpenak mantenduko dira.\n" "\tUtzi: ez sortu aurrezarpenik; itzuli sortze-interfazera." msgid "You need to select at least one filament preset." msgstr "Gutxienez filamentu-aurrezarpen bat hautatu behar duzu." msgid "You need to select at least one process preset." msgstr "Gutxienez prozesu-aurrezarpen bat hautatu behar duzu." msgid "Create filament presets failed. As follows:\n" msgstr "Filamentu-aurrezarpenak sortzeak huts egin du. Honela:\n" msgid "Create process presets failed. As follows:\n" msgstr "Prozesu-aurrezarpenak sortzeak huts egin du. Honela:\n" msgid "Vendor was not found; please reselect." msgstr "Ez da hornitzailea aurkitu; hautatu berriro." msgid "Current vendor has no models, please reselect." msgstr "Uneko fabrikatzaileak ez du modelorik; hautatu berriro." msgid "You have not selected the vendor and model or input the custom vendor and model." msgstr "Ez dituzu hornitzailea eta modeloa hautatu, ezta hornitzaile eta modelo pertsonalizatuak sartu ere." msgid "There may be escape characters in the custom printer vendor or model. Please delete and re-enter." msgstr "Baliteke ihes-karaktereak egotea inprimagailu pertsonalizatuaren fabrikatzailean edo modeloan. Ezabatu eta sartu berriro." msgid "All inputs in the custom printer vendor or model are spaces. Please re-enter." msgstr "Inprimagailu pertsonalizatuaren fabrikatzailean edo modeloan sartutako guztia zuriuneak dira. Sartu berriro." msgid "Please check bed printable shape and origin input." msgstr "Egiaztatu ohearen inprimatzeko forma eta jatorriaren sarrera." msgid "You have not yet selected the printer to replace the nozzle for; please choose a printer." msgstr "Oraindik ez duzu pita ordezkatzeko inprimagailua hautatu; aukeratu inprimagailu bat." msgid "The entered nozzle diameter is invalid, please re-enter:\n" msgstr "Sartutako pitaren diametroa ez da baliozkoa; sartu berriro:\n" msgid "" "The system preset does not allow creation. \n" "Please re-enter the printer model or nozzle diameter." msgstr "" "Sistemaren aurrezarpenak ez du sortzea onartzen.\n" "Sartu berriro inprimagailuaren modeloa edo pitaren diametroa." msgid "" "\n" "\n" "Available nozzle profiles for this printer:" msgstr "" "\n" "Inprimagailu honetarako erabilgarri dauden pita-profilak:" msgid "" "\n" "\n" "Choose YES to switch existing preset:" msgstr "" "\n" "Hautatu BAI lehendik dagoen aurrezarpenera aldatzeko:" msgid "Printer Created Successfully" msgstr "Inprimagailua ondo sortu da" msgid "Filament Created Successfully" msgstr "Filamentua ondo sortu da" msgid "Printer Created" msgstr "Inprimagailua sortu da" msgid "Please go to printer settings to edit your presets" msgstr "Joan inprimagailuaren ezarpenetara aurrezarpenak editatzeko" msgid "Filament Created" msgstr "Filamentua sortu da" msgid "" "Please go to filament settings to edit your presets if you need to.\n" "Please note that nozzle temperature, hot bed temperature, and maximum volumetric speed each have a significant impact on printing quality. Please set them carefully." msgstr "" "Joan filamentuen ezarpenetara aurrezarpenak editatu behar badituzu.\n" "Kontuan izan pitaren tenperaturak, ohe beroaren tenperaturak eta gehieneko abiadura bolumetrikoak eragin handia dutela inprimaketaren kalitatean. Ezarri arretaz." msgid "" "\n" "\n" "Orca has detected that your user presets synchronization function is not enabled, which may result in unsuccessful Filament settings on the Device page.\n" "Click \"Sync user presets\" to enable the synchronization function." msgstr "" "\n" "\n" "Orcak detektatu du erabiltzaile-aurrezarpenen sinkronizazio-funtzioa ez dagoela gaituta; horrek Gailua orriko Filamentuaren ezarpenetan huts egitea eragin dezake.\n" "Egin klik \"Sinkronizatu erabiltzaile-aurrezarpenak\" aukeran sinkronizazio-funtzioa gaitzeko." msgid "Printer Setting" msgstr "Inprimagailuaren ezarpena" msgid "Printer config bundle(.orca_printer)" msgstr "Inprimagailuaren konfigurazio-sorta (.orca_printer)" msgid "Filament bundle(.orca_filament)" msgstr "Filamentu-sorta (.orca_filament)" msgid "Printer presets(.zip)" msgstr "Inprimagailu-aurrezarpenak (.zip)" msgid "Filament presets(.zip)" msgstr "Filamentu-aurrezarpenak (.zip)" msgid "Process presets(.zip)" msgstr "Prozesu-aurrezarpenak (.zip)" msgid "initialize fail" msgstr "hasieratzeak huts egin du" msgid "add file fail" msgstr "fitxategia gehitzeak huts egin du" msgid "add bundle structure file fail" msgstr "sorta-egituraren fitxategia gehitzeak huts egin du" msgid "finalize fail" msgstr "amaitzeak huts egin du" msgid "open zip written fail" msgstr "idatzitako zipa irekitzeak huts egin du" msgid "Export successful" msgstr "Esportazioa ondo egin da" #, c-format, boost-format msgid "" "The '%s' folder already exists in the current directory. Do you want to clear it and rebuild it?\n" "If not, a time suffix will be added, and you can modify the name after creation." msgstr "" "'%s' karpeta badago lehendik uneko direktorioan. Hustu eta berreraiki nahi duzu?\n" "Bestela, denbora-atzizki bat gehituko da, eta izena sortu ondoren aldatu ahal izango duzu." #, c-format, boost-format msgid "" "The file: %s\n" "may have been opened by another program.\n" "Please close it and try again." msgstr "" "Baliteke %s fitxategia beste programa batek irekita edukitzea.\n" "Itxi eta saiatu berriro." msgid "" "Printer and all the filament and process presets that belongs to the printer.\n" "Can be shared with others." msgstr "" "Inprimagailua eta hari dagozkion filamentuen eta prozesuen aurrezarpen guztiak.\n" "Besteekin parteka daitezke." msgid "" "User's filament preset set.\n" "Can be shared with others." msgstr "" "Erabiltzailearen filamentu-aurrezarpenen multzoa.\n" "Besteekin parteka daiteke." msgid "Only display printers with changes to printer, filament, and process presets are displayed." msgstr "Inprimagailuaren, filamentuen edo prozesuen aurrezarpenetan aldaketak dituzten inprimagailuak bakarrik bistaratzen dira." msgid "Only display the filament names with changes to filament presets." msgstr "Bistaratu soilik filamentu-aurrezarpenetan aldaketak dituzten filamentu-izenak." msgid "Only printer names with user printer presets will be displayed, and each preset you choose will be exported as a zip." msgstr "Erabiltzailearen inprimagailu-aurrezarpenak dituzten inprimagailu-izenak soilik bistaratuko dira, eta hautatzen duzun aurrezarpen bakoitza zip gisa esportatuko da." msgid "" "Only the filament names with user filament presets will be displayed, \n" "and all user filament presets in each filament name you select will be exported as a zip." msgstr "" "Erabiltzailearen filamentu-aurrezarpenak dituzten filamentu-izenak soilik bistaratuko dira, \n" "eta hautatzen duzun filamentu-izen bakoitzeko erabiltzailearen filamentu-aurrezarpen guztiak zip gisa esportatuko dira." msgid "" "Only printer names with changed process presets will be displayed, \n" "and all user process presets in each printer name you select will be exported as a zip." msgstr "" "Prozesu-aurrezarpen aldatuak dituzten inprimagailu-izenak soilik bistaratuko dira, \n" "eta hautatzen duzun inprimagailu-izen bakoitzeko erabiltzailearen prozesu-aurrezarpen guztiak zip gisa esportatuko dira." msgid "Please select at least one printer or filament." msgstr "Hautatu gutxienez inprimagailu edo filamentu bat." msgid "Please select a preset type you want to export" msgstr "Hautatu esportatu nahi duzun aurrezarpen mota" msgid "Failed to create temporary folder, please try Export Configs again." msgstr "Ezin izan da aldi baterako karpeta sortu; saiatu berriro Esportatu konfigurazioak." msgid "Edit Filament" msgstr "Editatu filamentua" msgid "Filament presets under this filament" msgstr "Filamentu honen azpiko filamentu-aurrezarpenak" msgid "Note: If the only preset under this filament is deleted, the filament will be deleted after exiting the dialog." msgstr "Oharra: filamentu honen azpiko aurrezarpen bakarra ezabatzen bada, filamentua ezabatuko da elkarrizketa-koadrotik irtetean." msgid "Presets inherited by other presets cannot be deleted" msgstr "Beste aurrezarpen batzuetatik herentzian hartutako aurrezarpenak ezin dira ezabatu" msgid "The following presets inherits this preset." msgid_plural "The following preset inherits this preset." msgstr[0] "Hurrengo aurrezarpenak aurrezarpen hau hartuko du herentzian." msgstr[1] "Hurrengo aurrezarpenek aurrezarpen hau hartuko dute herentzian." msgid "Delete Preset" msgstr "Ezabatu aurrezarpena" msgid "Are you sure to delete the selected preset?" msgstr "Ziur hautatutako aurrezarpena ezabatu nahi duzula?" msgid "Delete preset" msgstr "Ezabatu aurrezarpena" msgid "+ Add Preset" msgstr "+ Gehitu aurrezarpena" msgid "" "All the filament presets belong to this filament would be deleted.\n" "If you are using this filament on your printer, please reset the filament information for that slot." msgstr "" "Filamentu honi dagozkion filamentu-aurrezarpen guztiak ezabatuko dira.\n" "Filamentu hau inprimagailuan erabiltzen ari bazara, berrezarri zirrikitu horretako filamentuaren informazioa." msgid "Delete filament" msgstr "Ezabatu filamentua" msgid "Add Preset" msgstr "Gehitu aurrezarpena" msgid "Add preset for new printer" msgstr "Gehitu aurrezarpena inprimagailu berriarentzat" msgid "Copy preset from filament" msgstr "Kopiatu aurrezarpena filamentutik" msgid "The filament choice not find filament preset, please reselect it" msgstr "Filamentu-hautapenak ez du filamentu-aurrezarpena aurkitu; hautatu berriro" msgid "[Delete Required]" msgstr "[Ezabatzea beharrezkoa]" msgid "Edit Preset" msgstr "Editatu aurrezarpena" msgid "For more information, please check out our Wiki" msgstr "Informazio gehiago lortzeko, begiratu gure wikia" msgid "Wiki" msgstr "Wikia" msgid "Collapse" msgstr "Tolestu" msgid "Daily Tips" msgstr "Eguneko aholkuak" msgid "" "The printer nozzle information has not been set.\n" "Please configure it before proceeding with the calibration." msgstr "" "Ez da inprimagailuaren pitaren informazioa ezarri.\n" "Konfiguratu kalibrazioarekin jarraitu aurretik." msgid "" "The nozzle type does not match the actual printer nozzle type.\n" "Please click the Sync button above and restart the calibration." msgstr "" "Pita mota ez dator bat inprimagailuaren benetako pita motarekin.\n" "Egin klik goiko Sinkronizatu botoian eta berrabiarazi kalibrazioa." #, c-format, boost-format msgid "Printing %1s material with %2s nozzle may cause nozzle damage." msgstr "%1s materiala %2s pita batekin inprimatzeak pita kaltetu dezake." msgid "Need select printer" msgstr "Inprimagailua hautatu behar da" msgid "The start, end or step is not valid value." msgstr "Hasiera, amaiera edo urratsa ez da balio baliozkoa." msgid "The number of printer extruders and the printer selected for calibration does not match." msgstr "Inprimagailuaren estrusore kopurua ez dator bat kalibraziorako hautatutako inprimagailuarekin." #, c-format, boost-format msgid "The nozzle diameter of %s extruder is 0.2mm which does not support automatic Flow Dynamics calibration." msgstr "%s estrusorearen pitaren diametroa 0,2 mm da, eta ez du fluxu-dinamikaren kalibrazio automatikoa onartzen." #, c-format, boost-format msgid "" "The currently selected nozzle diameter of %s extruder does not match the actual nozzle diameter.\n" "Please click the Sync button above and restart the calibration." msgstr "" "Une honetan %s estrusorearentzat hautatutako pitaren diametroa ez dator bat benetako diametroarekin.\n" "Egin klik goiko Sinkronizatu botoian eta berrabiarazi kalibrazioa." msgid "" "The nozzle diameter does not match the actual printer nozzle diameter.\n" "Please click the Sync button above and restart the calibration." msgstr "" "Pitaren diametroa ez dator bat inprimagailuaren benetako pitaren diametroarekin.\n" "Egin klik goiko Sinkronizatu botoian eta berrabiarazi kalibrazioa." #, c-format, boost-format msgid "" "The currently selected nozzle type of %s extruder does not match the actual printer nozzle type.\n" "Please click the Sync button above and restart the calibration." msgstr "" "Une honetan %s estrusorearentzat hautatutako pita mota ez dator bat inprimagailuaren benetako pita motarekin.\n" "Egin klik goiko Sinkronizatu botoian eta berrabiarazi kalibrazioa." msgid "Unable to calibrate: maybe because the set calibration value range is too large, or the step is too small" msgstr "Ezin da kalibratu: baliteke ezarritako kalibrazio-balioen tartea handiegia izatea edo urratsa txikiegia izatea" msgid "Physical Printer" msgstr "Inprimagailu fisikoa" msgid "Print Host upload" msgstr "Inprimatze-ostalariaren karga" msgid "Select the network agent implementation for printer communication. Available agents are registered at startup." msgstr "Hautatu sare-agentearen inplementazioa inprimagailuarekin komunikatzeko. Erabilgarri dauden agenteak abioan erregistratzen dira." msgid "Select a Flashforge printer" msgstr "Hautatu Flashforge inprimagailu bat" msgid "Discovered Printers" msgstr "Aurkitutako inprimagailuak" msgid "Could not get a valid Printer Host reference" msgstr "Ezin izan da inprimagailu-ostalariaren erreferentzia baliozkorik lortu" msgid "Valid session not detected. Proceed with login to 3DPrinterOS?" msgstr "Ez da baliozko saiorik detektatu. 3DPrinterOS-en saioa hasi nahi duzu?" msgid "Success!" msgstr "Ondo egin da!" msgid "Are you sure to log out?" msgstr "Ziur saioa amaitu nahi duzula?" msgid "View print host webui in Device tab" msgstr "Ikusi inprimatze-ostalariaren web-interfazea Gailua fitxan" msgid "Replace the BambuLab's device tab with print host webui" msgstr "Ordeztu BambuLab-en gailuaren fitxa inprimatze-ostalariaren web-interfazearekin" msgid "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-signed certificate." msgstr "HTTPS CA fitxategia aukerakoa da. HTTPS ziurtagiri autosinatuekin erabiltzen baduzu bakarrik behar da." msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*" msgstr "Ziurtagiri-fitxategiak (*.crt, *.pem)|*.crt;*.pem|Fitxategi guztiak|*.*" msgid "Open CA certificate file" msgstr "Ireki CA ziurtagiri-fitxategia" #, c-format, boost-format msgid "On this system, %s uses HTTPS certificates from the system Certificate Store or Keychain." msgstr "Sistema honetan, %s-k sistemaren Ziurtagiri-biltegi edo Giltzatako HTTPS ziurtagiriak erabiltzen ditu." msgid "To use a custom CA file, please import your CA file into Certificate Store / Keychain." msgstr "CA fitxategi pertsonalizatua erabiltzeko, inportatu CA fitxategia Ziurtagiri-biltegira / Giltzatakora." msgid "Login/Test" msgstr "Saioa hasi/Probatu" msgid "Connection to printers connected via the print host failed." msgstr "Inprimatze-ostalariaren bidez konektatutako inprimagailuetarako konexioak huts egin du." msgid "Detect Creality K-series printer" msgstr "Detektatu Creality K serieko inprimagailua" msgid "Click Scan to look for K-series printers on your network." msgstr "Egin klik Eskaneatu botoian sareko K serieko inprimagailuak bilatzeko." msgid "Use Selected" msgstr "Erabili hautatutakoa" msgid "Scanning the LAN for K-series printers... this takes a few seconds." msgstr "LAN sarea K serieko inprimagailuen bila eskaneatzen... segundo batzuk beharko ditu." msgid "No K-series printers found. Make sure the printer is on the same network and not blocked by Wi-Fi client isolation, then click Scan again." msgstr "Ez da K serieko inprimagailurik aurkitu. Ziurtatu inprimagailua sare berean dagoela eta Wi-Fi bezeroen isolamenduak ez duela blokeatzen; ondoren, egin klik berriro Eskaneatu botoian." #, c-format msgid "Found %zu Creality printer(s). Select one and click Use Selected." msgstr "%zu Creality inprimagailu aurkitu dira. Hautatu bat eta egin klik Erabili hautatutakoa botoian." msgid "Active" msgstr "Aktibo" msgid "Printers" msgstr "Inprimagailuak" msgid "Processes" msgstr "Prozesuak" msgid "Show/Hide system information" msgstr "Erakutsi/Ezkutatu sistemaren informazioa" msgid "Copy system information to clipboard" msgstr "Kopiatu sistemaren informazioa arbelera" msgid "We need information for diagnosing source of the issue. Check wiki page for detailed guide." msgstr "Arazoaren jatorria diagnostikatzeko informazioa behar dugu. Begiratu wiki-orria gida xehatua ikusteko." msgid "Pack button collects project file and logs of current session onto a zip file." msgstr "Paketatu botoiak proiektu-fitxategia eta uneko saioko erregistroak ZIP fitxategi batean biltzen ditu." msgid "Any additional visual examples like images or screen recordings might be helpful while reporting the issue." msgstr "Irudiak edo pantaila-grabazioak bezalako adibide bisual osagarriak lagungarriak izan daitezke arazoaren berri ematean." msgid "Report issue" msgstr "Jakinarazi arazoa" msgid "Pack" msgstr "Paketatu" msgid "Cleans and rebuilds system profiles cache on next launch." msgstr "Sistemako profilen cachea garbitu eta berreraikitzen du hurrengo abioan." msgid "Clean system profiles cache" msgstr "Garbitu sistemako profilen cachea" msgid "Clean" msgstr "Garbitu" msgid "Loaded profiles overview" msgstr "Kargatutako profilen ikuspegi orokorra" msgid "This section shows information for loaded profiles." msgstr "Atal honek kargatutako profilei buruzko informazioa erakusten du." msgid "Exports detailed overview of loaded profiles in json format." msgstr "Kargatutako profilen ikuspegi xehatua JSON formatuan esportatzen du." msgid "Configurations folder" msgstr "Konfigurazioen karpeta" msgid "Opens configurations folder." msgstr "Konfigurazioen karpeta irekitzen du." msgid "Log level" msgstr "Erregistro-maila" msgid "Stored logs" msgstr "Gordetako erregistroak" msgid "Packs all stored logs onto a zip file." msgstr "Gordetako erregistro guztiak ZIP fitxategi batean paketatzen ditu." msgid "Profiles" msgstr "Profilak" msgid "Select NO to close dialog and review project." msgstr "Hautatu EZ elkarrizketa-koadroa ixteko eta proiektua berrikusteko." msgid "No project file on current session. Only logs will be included to package" msgstr "Uneko saioan ez dago proiektu-fitxategirik. Erregistroak bakarrik sartuko dira paketean" msgid "Please make sure any instances of OrcaSlicer are not running" msgstr "Ziurtatu OrcaSlicer-en instantziarik ez dagoela martxan" msgid "System folder cannot be deleted because some files are in use by another application. Please close any applications using these files and try again." msgstr "Ezin da sistemaren karpeta ezabatu, fitxategi batzuk beste aplikazio batek erabiltzen dituelako. Itxi fitxategi horiek erabiltzen dituzten aplikazioak eta saiatu berriro." msgid "Failed to delete system folder..." msgstr "Ezin izan da sistemaren karpeta ezabatu..." msgid "Failed to determine executable path." msgstr "Ezin izan da exekutagarriaren bidea zehaztu." msgid "Failed to launch a new instance." msgstr "Ezin izan da instantzia berri bat abiarazi." msgid "log(s)" msgstr "erregistro" msgid "Choose where to save the exported JSON file" msgstr "Aukeratu esportatutako JSON fitxategia non gorde" msgid "" "Export failed\n" "Please check write permissions or file in use by another application" msgstr "" "Esportazioak huts egin du\n" "Egiaztatu idazteko baimenak edo fitxategia beste aplikazio batek erabiltzen duen" msgid "Choose where to save the exported ZIP file" msgstr "Aukeratu esportatutako ZIP fitxategia non gorde" msgid "File already exists. Overwrite?" msgstr "Fitxategia badago lehendik. Gainidatzi?" msgid "3DPrinterOS Cloud upload options" msgstr "3DPrinterOS Cloud-era igotzeko aukerak" msgid "Single file" msgstr "Fitxategi bakarra" msgid "Project File" msgstr "Proiektuaren fitxategia" msgid "Project:" msgstr "Proiektua:" msgid "Printer type:" msgstr "Inprimagailu mota:" msgid "Printer type not found, please select manually." msgstr "Ez da inprimagailu mota aurkitu; hautatu eskuz." msgid "Authorizing..." msgstr "Baimena ematen..." msgid "Error. Can't get api token for authorization" msgstr "Errorea. Ezin da baimenerako API tokena lortu" msgid "Could not parse server response." msgstr "Ezin izan da zerbitzariaren erantzuna analizatu." msgid "Error saving session to file" msgstr "Errorea saioa fitxategian gordetzean" msgid "Error session check" msgstr "Errorea saioa egiaztatzean" msgid "Error during file upload" msgstr "Errorea fitxategia igotzean" #, c-format, boost-format msgid "Mismatched type of print host: %s" msgstr "Inprimatze-ostalari mota ez dator bat: %s" msgid "Connection to AstroBox is working correctly." msgstr "AstroBox-erako konexioak ondo funtzionatzen du." msgid "Could not connect to AstroBox" msgstr "Ezin izan da AstroBox-era konektatu" msgid "Note: AstroBox version 1.1.0 or higher is required." msgstr "Oharra: AstroBox 1.1.0 edo berriagoa behar da." msgid "Connection to Duet is working correctly." msgstr "Duet-erako konexioak ondo funtzionatzen du." msgid "Could not connect to Duet" msgstr "Ezin izan da Duet-era konektatu" msgid "Unknown error occurred" msgstr "Errore ezezagun bat gertatu da" msgid "Wrong password" msgstr "Pasahitz okerra" msgid "Could not get resources to create a new connection" msgstr "Ezin izan dira konexio berri bat sortzeko baliabideak lortu" msgid "Upload not enabled on FlashAir card." msgstr "Karga ez dago gaituta FlashAir txartelean." msgid "Connection to FlashAir is working correctly and upload is enabled." msgstr "FlashAir-erako konexioak ondo funtzionatzen du eta karga gaituta dago." msgid "Could not connect to FlashAir" msgstr "Ezin izan da FlashAir-era konektatu" msgid "Note: FlashAir with firmware 2.00.02 or newer and activated upload function is required." msgstr "Oharra: FlashAir 2.00.02 edo berriagoa den firmwarearekin eta karga-funtzioa aktibatuta behar da." msgid "Connection to MKS is working correctly." msgstr "MKS-rako konexioak ondo funtzionatzen du." msgid "Could not connect to MKS" msgstr "Ezin izan da MKS-ra konektatu" msgid "Connection to Moonraker is working correctly." msgstr "Moonrakerrekiko konexioak behar bezala funtzionatzen du." msgid "Could not connect to Moonraker" msgstr "Ezin izan da Moonrakerrekin konektatu" msgid "The host responded but it doesn't look like Moonraker (missing result.klippy_state)." msgstr "Ostalariak erantzun du, baina ez dirudi Moonraker denik (result.klippy_state falta da)." #, c-format, boost-format msgid "Could not parse Moonraker server response: %s" msgstr "Ezin izan da Moonraker zerbitzariaren erantzuna analizatu: %s" msgid "Connection to OctoPrint is working correctly." msgstr "OctoPrint-erako konexioak ondo funtzionatzen du." msgid "Could not connect to OctoPrint" msgstr "Ezin izan da OctoPrint-era konektatu" msgid "Note: OctoPrint version 1.1.0 or higher is required." msgstr "Oharra: OctoPrint 1.1.0 edo berriagoa behar da." msgid "Connection to Prusa SL1 / SL1S is working correctly." msgstr "Prusa SL1 / SL1S-erako konexioak ondo funtzionatzen du." msgid "Could not connect to Prusa SLA" msgstr "Ezin izan da Prusa SLA-ra konektatu" msgid "Connection to PrusaLink is working correctly." msgstr "PrusaLink-erako konexioak ondo funtzionatzen du." msgid "Could not connect to PrusaLink" msgstr "Ezin izan da PrusaLink-era konektatu" msgid "Storages found" msgstr "Biltegiratze-gailuak aurkitu dira" #. TRN %1% = storage path #, boost-format msgid "%1% : read only" msgstr "%1% : irakurtzeko soilik" #. TRN %1% = storage path #, boost-format msgid "%1% : no free space" msgstr "%1% : ez dago leku librerik" #. TRN %1% = host #, boost-format msgid "Upload has failed. There is no suitable storage found at %1%." msgstr "Kargak huts egin du. Ez da biltegiratze-gailu egokirik aurkitu %1% kokapenean." msgid "Connection to Prusa Connect is working correctly." msgstr "Prusa Connect-erako konexioak ondo funtzionatzen du." msgid "Could not connect to Prusa Connect" msgstr "Ezin izan da Prusa Connect-era konektatu" msgid "Connection to Repetier is working correctly." msgstr "Repetier-erako konexioak ondo funtzionatzen du." msgid "Could not connect to Repetier" msgstr "Ezin izan da Repetier-era konektatu" msgid "Note: Repetier version 0.90.0 or higher is required." msgstr "Oharra: Repetier 0.90.0 edo berriagoa behar da." #, boost-format msgid "" "HTTP status: %1%\n" "Message body: \"%2%\"" msgstr "" "HTTP egoera: %1%\n" "Mezuaren gorputza: \"%2%\"" #, boost-format msgid "" "Parsing of host response failed.\n" "Message body: \"%1%\"\n" "Error: \"%2%\"" msgstr "" "Ostalariaren erantzuna analizatzeak huts egin du.\n" "Mezuaren gorputza: \"%1%\"\n" "Errorea: \"%2%\"" #, boost-format msgid "" "Enumeration of host printers failed.\n" "Message body: \"%1%\"\n" "Error: \"%2%\"" msgstr "" "Ostalariaren inprimagailuen enumerazioak huts egin du.\n" "Mezuaren gorputza: \"%1%\"\n" "Errorea: \"%2%\"" msgid "It has a small layer height. This results in almost negligible layer lines and high print quality. It is suitable for most printing cases." msgstr "Geruza-altuera txikia du. Horren ondorioz, geruza-lerroak ia hautemanezinak dira eta inprimatze-kalitatea handia da. Inprimatze-kasu gehienetarako egokia da." # AI Translated msgid "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds and acceleration, and the sparse infill pattern is Gyroid. This results in much higher print quality but a much longer print time." msgstr "0,2 mm-ko pitaren profil lehenetsiarekin alderatuta, abiadura eta azelerazio txikiagoak ditu, eta dentsitate baxuko betegarriaren patroia Giroidea da. Horrek inprimatze-kalitate askoz handiagoa ematen du, baina inprimatze-denbora askoz luzeagoa." msgid "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height. This results in almost negligible layer lines and slightly shorter print time." msgstr "0,2 mm-ko pitaren profil lehenetsiarekin alderatuta, geruza-altuera pixka bat handiagoa du. Horren ondorioz, geruza-lerroak ia hautemanezinak dira eta inprimatze-denbora pixka bat laburragoa." msgid "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer height. This results in slightly visible layer lines but shorter print time." msgstr "0,2 mm-ko pitaren profil lehenetsiarekin alderatuta, geruza-altuera handiagoa du. Horren ondorioz, geruza-lerroak pixka bat ikusgarriak dira, baina inprimatze-denbora laburragoa." msgid "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height. This results in almost invisible layer lines and higher print quality but longer print time." msgstr "0,2 mm-ko pitaren profil lehenetsiarekin alderatuta, geruza-altuera txikiagoa du. Horrek geruza-lerro ia ikusezinak eta inprimatze-kalitate handiagoa ematen ditu, baina denbora luzeagoa behar du." # AI Translated msgid "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. This results in almost invisible layer lines and much higher print quality but much longer print time." msgstr "0,2 mm-ko pitaren profil lehenetsiarekin alderatuta, geruza-lerro txikiagoak, abiadura eta azelerazio txikiagoak ditu, eta dentsitate baxuko betegarriaren patroia Giroidea da. Horren ondorioz, geruza-lerroak ia ikusezinak dira eta inprimatze-kalitatea askoz handiagoa, baina inprimatze-denbora askoz luzeagoa." msgid "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height. This results in minimal layer lines and higher print quality but longer print time." msgstr "0,2 mm-ko pitaren profil lehenetsiarekin alderatuta, geruza-altuera txikiagoa du. Horrek geruza-lerro oso txikiak eta kalitate handiagoa ematen ditu, baina denbora luzeagoa behar du." # AI Translated msgid "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. This results in minimal layer lines and much higher print quality but much longer print time." msgstr "0,2 mm-ko pitaren profil lehenetsiarekin alderatuta, geruza-lerro txikiagoak, abiadura eta azelerazio txikiagoak ditu, eta dentsitate baxuko betegarriaren patroia Giroidea da. Horren ondorioz, geruza-lerroak minimoak dira eta inprimatze-kalitatea askoz handiagoa, baina inprimatze-denbora askoz luzeagoa." msgid "It has a normal layer height. This results in average layer lines and print quality. It is suitable for most printing cases." msgstr "Geruza-altuera normala du. Horren ondorioz, geruza-lerroak eta inprimatze-kalitatea ertainak dira. Inprimatze-kasu gehienetarako egokia da." msgid "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops and a higher sparse infill density. This results in higher print strength but more filament consumption and longer print time." msgstr "0,4 mm-ko pitaren profil lehenetsiarekin alderatuta, horma-begizta gehiago eta dentsitate baxuko betegarriaren dentsitate handiagoa ditu. Horrek inprimaketaren erresistentzia handitzen du, baina filamentu-kontsumoa eta inprimatze-denbora ere bai." msgid "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height. This results in more apparent layer lines and lower print quality, but slightly shorter print time." msgstr "0,4 mm-ko pitaren profil lehenetsiarekin alderatuta, geruza-altuera handiagoa du. Horren ondorioz, geruza-lerroak nabarmenagoak dira eta inprimatze-kalitatea txikiagoa, baina inprimatze-denbora pixka bat laburragoa." msgid "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height. This results in more apparent layer lines and lower print quality, but shorter print time." msgstr "0,4 mm-ko pitaren profil lehenetsiarekin alderatuta, geruza-altuera handiagoa du. Horren ondorioz, geruza-lerroak nabarmenagoak dira eta inprimatze-kalitatea txikiagoa, baina inprimatze-denbora laburragoa." msgid "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height. This results in less apparent layer lines and higher print quality but longer print time." msgstr "0,4 mm-ko pitaren profil lehenetsiarekin alderatuta, geruza-altuera txikiagoa du. Horren ondorioz, geruza-lerroak gutxiago nabaritzen dira eta inprimatze-kalitatea handiagoa, baina inprimatze-denbora luzeagoa." # AI Translated msgid "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. This results in less apparent layer lines and much higher print quality but much longer print time." msgstr "0,4 mm-ko pitaren profil lehenetsiarekin alderatuta, geruza-altuera, abiadura eta azelerazio txikiagoak ditu, eta dentsitate baxuko betegarriaren patroia Giroidea da. Horren ondorioz, geruza-lerroak gutxiago nabaritzen dira eta inprimatze-kalitatea askoz handiagoa, baina inprimatze-denbora askoz luzeagoa." msgid "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height. This results in almost negligible layer lines and higher print quality but longer print time." msgstr "0,4 mm-ko pitaren profil lehenetsiarekin alderatuta, geruza-altuera txikiagoa du. Horren ondorioz, geruza-lerroak ia hautemanezinak dira eta inprimatze-kalitatea handiagoa, baina inprimatze-denbora luzeagoa." # AI Translated msgid "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. This results in almost negligible layer lines and much higher print quality but much longer print time." msgstr "0,4 mm-ko pitaren profil lehenetsiarekin alderatuta, geruza-altuera, abiadura eta azelerazio txikiagoak ditu, eta dentsitate baxuko betegarriaren patroia Giroidea da. Horren ondorioz, geruza-lerroak ia hautemanezinak dira eta inprimatze-kalitatea askoz handiagoa, baina inprimatze-denbora askoz luzeagoa." msgid "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height. This results in almost negligible layer lines and longer print time." msgstr "0,4 mm-ko pitaren profil lehenetsiarekin alderatuta, geruza-altuera txikiagoa du. Horren ondorioz, geruza-lerroak ia hautemanezinak dira eta inprimatze-denbora luzeagoa." msgid "It has a big layer height. This results in apparent layer lines and ordinary print quality and print time." msgstr "Geruza-altuera handia du. Horren ondorioz, geruza-lerroak nabariak dira, eta inprimatze-kalitatea eta inprimatze-denbora arruntak." msgid "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops and a higher sparse infill density. This results in higher print strength but more filament consumption and longer print time." msgstr "0,6 mm-ko pitaren profil lehenetsiarekin alderatuta, horma-begizta gehiago eta dentsitate baxuko betegarriaren dentsitate handiagoa ditu. Horrek inprimaketaren erresistentzia handitzen du, baina filamentu-kontsumoa eta inprimatze-denbora ere bai." msgid "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height. This results in more apparent layer lines and lower print quality, but shorter print time in some cases." msgstr "0,6 mm-ko pitaren profil lehenetsiarekin alderatuta, geruza-altuera handiagoa du. Horren ondorioz, geruza-lerroak nabarmenagoak dira eta inprimatze-kalitatea txikiagoa, baina kasu batzuetan inprimatze-denbora laburragoa." msgid "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height. This results in much more apparent layer lines and much lower print quality, but shorter print time in some cases." msgstr "0,6 mm-ko pitaren profil lehenetsiarekin alderatuta, geruza-altuera handiagoa du. Horren ondorioz, geruza-lerroak askoz nabarmenagoak dira eta inprimatze-kalitatea askoz txikiagoa, baina kasu batzuetan inprimatze-denbora laburragoa." msgid "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height. This results in less apparent layer lines and slight higher print quality but longer print time." msgstr "0,6 mm-ko pitaren profil lehenetsiarekin alderatuta, geruza-altuera txikiagoa du. Horren ondorioz, geruza-lerroak gutxiago nabaritzen dira eta inprimatze-kalitatea pixka bat handiagoa, baina inprimatze-denbora luzeagoa." msgid "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height. This results in less apparent layer lines and higher print quality but longer print time." msgstr "0,6 mm-ko pitaren profil lehenetsiarekin alderatuta, geruza-altuera txikiagoa du. Horren ondorioz, geruza-lerroak gutxiago nabaritzen dira eta inprimatze-kalitatea handiagoa, baina inprimatze-denbora luzeagoa." msgid "It has a very big layer height. This results in very apparent layer lines, low print quality and shorter print time." msgstr "Geruza-altuera oso handia du. Horrek geruza-lerro oso nabarmenak, kalitate baxua eta inprimatze-denbora laburragoa ematen ditu." msgid "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height. This results in very apparent layer lines and much lower print quality, but shorter print time in some cases." msgstr "0,8 mm-ko pitaren profil lehenetsiarekin alderatuta, geruza-altuera handiagoa du. Horrek geruza-lerro oso nabarmenak eta kalitate askoz txikiagoa ematen ditu, baina kasu batzuetan denbora laburragoa." msgid "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger layer height. This results in extremely apparent layer lines and much lower print quality, but much shorter print time in some cases." msgstr "0,8 mm-ko pitaren profil lehenetsiarekin alderatuta, geruza-altuera askoz handiagoa du. Horrek geruza-lerro izugarri nabarmenak eta kalitate askoz txikiagoa ematen ditu, baina kasu batzuetan inprimatze-denbora askoz laburragoa." msgid "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height. This results in slightly less but still apparent layer lines and slightly higher print quality but longer print time in some cases." msgstr "0,8 mm-ko pitaren profil lehenetsiarekin alderatuta, geruza-altuera pixka bat txikiagoa du. Horren ondorioz, geruza-lerroak pixka bat gutxiago baina oraindik nabariak dira, eta inprimatze-kalitatea pixka bat handiagoa, baina kasu batzuetan inprimatze-denbora luzeagoa." msgid "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer height. This results in less but still apparent layer lines and slightly higher print quality but longer print time in some cases." msgstr "0,8 mm-ko pitaren profil lehenetsiarekin alderatuta, geruza-altuera txikiagoa du. Horrek geruza-lerro gutxiago baina oraindik nabarmenak eta kalitate apur bat handiagoa ematen ditu, baina kasu batzuetan denbora luzeagoa." msgid "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances." msgstr "Hau ez da ohiko filamentua, ezta Bambu filamentuetako bat ere, eta asko aldatzen da marka batetik bestera. Horregatik, inprimatu aurretik fabrikatzaileari profil egokia eskatzea eta parametro batzuk filamentuko ezaugarrien arabera doitzea gomendatzen da." msgid "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials." msgstr "Filamentu hau inprimatzean, okertzeko eta geruzen arteko itsaspen txikia izateko arriskua dago. Emaitza hobeak lortzeko, kontsultatu wikia: Tenperatura altuko/ingeniaritzako materialak inprimatzeko aholkuak." msgid "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials." msgstr "Filamentu hau inprimatzean, pita buxatzeko, materiala jariatzeko, pieza okertzeko eta geruzen arteko itsaspen txikia izateko arriskua dago. Emaitza hobeak lortzeko, kontsultatu wikia: Tenperatura altuko/ingeniaritzako materialak inprimatzeko aholkuak." msgid "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG." msgstr "Dagokion filamentua erabiliz emaitza garden edo zeharrargi hobeak lortzeko, kontsultatu wikia: PETG gardena inprimatzeko aholkuak." msgid "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing." msgstr "Inprimaketek distira handiagoa izan dezaten, lehortu filamentua erabili aurretik, eta ezarri kanpoko hormaren abiadura 40 eta 60 mm/s artean xerratzean." msgid "This filament is only used to print models with a low density usually, and some special parameters are required. To get better printing quality, please refer to this wiki: Instructions for printing RC model with foaming PLA (PLA Aero)." msgstr "Filamentu hau dentsitate txikiko modeloak inprimatzeko erabiltzen da normalean, eta parametro berezi batzuk behar ditu. Inprimaketa-kalitate hobea lortzeko, kontsultatu wikia: PLA apardunarekin (PLA Aero) RC modeloak inprimatzeko argibideak." msgid "This filament is only used to print models with a low density usually, and some special parameters are required. To get better printing quality, please refer to this wiki: ASA Aero Printing Guide." msgstr "Filamentu hau dentsitate txikiko modeloak inprimatzeko erabiltzen da normalean, eta parametro berezi batzuk behar ditu. Inprimaketa-kalitate hobea lortzeko, kontsultatu wikia: ASA Aero inprimatzeko gida." msgid "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide." msgstr "Filamentu hau bigunegia da eta ez da AMSarekin bateragarria. Inprimatzeko baldintza asko bete behar dira; kalitate hobea lortzeko, kontsultatu wikia: TPU inprimatzeko gida." msgid "This filament has high enough hardness (about 67D) and is compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide." msgstr "Filamentu honek nahikoa gogortasun du (67D inguru) eta AMSarekin bateragarria da. Inprimatzeko baldintza asko bete behar dira; kalitate hobea lortzeko, kontsultatu wikia: TPU inprimatzeko gida." msgid "If you are to print a kind of soft TPU, please don't slice with this profile, and it is only for TPU that has high enough hardness (not less than 55D) and is compatible with the AMS. To get better printing quality, please refer to this wiki: TPU printing guide." msgstr "TPU bigun mota bat inprimatu behar baduzu, ez xerratu profil honekin. Profil hau nahikoa gogorra den (gutxienez 55D) eta AMSarekin bateragarria den TPUrako bakarrik da. Inprimaketa-kalitate hobea lortzeko, kontsultatu wikia: TPU inprimatzeko gida." msgid "This is a water-soluble support filament, and usually it is only for the support structure and not for the model body. Printing this filament is of many requirements, and to get better printing quality, please refer to this wiki: PVA Printing Guide." msgstr "Uretan disolbagarria den euskarri-filamentua da, eta normalean euskarri-egiturarako bakarrik erabiltzen da, ez modeloaren gorputzerako. Filamentua inprimatzeko baldintza asko bete behar dira; kalitate hobea lortzeko, kontsultatu wikia: PVA inprimatzeko gida." msgid "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function." msgstr "Uretan disolbagarria ez den euskarri-filamentua da, eta normalean euskarri-egiturarako bakarrik erabiltzen da, ez modeloaren gorputzerako. Inprimaketa-kalitate hobea lortzeko, kontsultatu wikia: Euskarri-filamentua eta euskarri-funtzioa erabiltzeko aholkuak." msgid "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets." msgstr "Aurrezarpen generikoak modu kontserbadorean doituta daude filamentuen aukera zabalagoarekin bateragarriak izateko. Inprimaketa-kalitate eta abiadura handiagoak lortzeko, erabili Bambu filamentuak Bambu aurrezarpenekin." msgid "High quality profile for 0.2mm nozzle, prioritizing print quality." msgstr "0,2 mm-ko pitarako kalitate handiko profila, inprimaketa-kalitatea lehenesten duena." msgid "High quality profile for 0.16mm layer height, prioritizing print quality and strength." msgstr "0,16 mm-ko geruza-altuerarako kalitate handiko profila, inprimaketa-kalitatea eta erresistentzia lehenesten dituena." msgid "Standard profile for 0.16mm layer height, prioritizing speed." msgstr "0,16 mm-ko geruza-altuerarako profil estandarra, abiadura lehenesten duena." msgid "High quality profile for 0.2mm layer height, prioritizing strength and print quality." msgstr "0,2 mm-ko geruza-altuerarako kalitate handiko profila, erresistentzia eta inprimaketa-kalitatea lehenesten dituena." msgid "Standard profile for 0.4mm nozzle, prioritizing speed." msgstr "0,4 mm-ko pitarako profil estandarra, abiadura lehenesten duena." msgid "High quality profile for 0.6mm nozzle, prioritizing print quality and strength." msgstr "0,6 mm-ko pitarako kalitate handiko profila, inprimaketa-kalitatea eta erresistentzia lehenesten dituena." msgid "Strength profile for 0.6mm nozzle, prioritizing strength." msgstr "0,6 mm-ko pitarako erresistentzia-profila, erresistentzia lehenesten duena." msgid "Standard profile for 0.6mm nozzle, prioritizing speed." msgstr "0,6 mm-ko pitarako profil estandarra, abiadura lehenesten duena." msgid "High quality profile for 0.8mm nozzle, prioritizing print quality." msgstr "0,8 mm-ko pitarako kalitate handiko profila, inprimaketa-kalitatea lehenesten duena." msgid "Strength profile for 0.8mm nozzle, prioritizing strength." msgstr "0,8 mm-ko pitarako erresistentzia-profila, erresistentzia lehenesten duena." msgid "Standard profile for 0.8mm nozzle, prioritizing speed." msgstr "0,8 mm-ko pitarako profil estandarra, abiadura lehenesten duena." msgid "No AMS" msgstr "AMSrik ez" msgid "There is no device available to send printing." msgstr "Ez dago gailurik erabilgarri inprimaketa bidaltzeko." msgid "The number of printers in use simultaneously cannot be equal to 0." msgstr "Aldi berean erabiltzen diren inprimagailuen kopurua ezin da 0 izan." msgid "Use External Spool" msgstr "Erabili kanpoko bobina" msgid "Select Printers" msgstr "Hautatu inprimagailuak" msgid "Device Name" msgstr "Gailuaren izena" msgid "Device Status" msgstr "Gailuaren egoera" msgid "AMS Status" msgstr "AMSaren egoera" msgid "Please select the devices you would like to manage here (up to 6 devices)" msgstr "Mesedez, hautatu hemen kudeatu nahi dituzun gailuak (gehienez 6 gailu)" msgid "Printing Options" msgstr "Inprimatze-aukerak" msgid "Flow Dynamic Calibration" msgstr "Fluxuaren kalibrazio dinamikoa" msgid "Send Options" msgstr "Bidalketa aukerak" msgid "Send to" msgstr "Bidali hona:" msgid "printers at the same time. (It depends on how many devices can undergo heating at the same time.)" msgstr "inprimagailu, aldi berean. (Aldi berean bero daitezkeen gailu kopuruaren araberakoa)." msgid "Wait" msgstr "Itxaron" msgid "minute each batch. (It depends on how long it takes to complete heating.)" msgstr "minutu sorta bakoitzeko. (Berotzea osatzeko behar den denboraren araberakoa da.)" msgid "Task Sending" msgstr "Zeregina bidaltzen" msgid "Task Sent" msgstr "Zeregina bidalita" msgid "Edit multiple printers" msgstr "Editatu hainbat inprimagailu" msgid "Select connected printers (0/6)" msgstr "Hautatu konektatutako inprimagailuak (0/6)" #, c-format, boost-format msgid "Select Connected Printers (%d/6)" msgstr "Hautatu konektatutako inprimagailuak (%d/6)" #, c-format, boost-format msgid "The maximum number of printers that can be selected is %d" msgstr "Hauta daitezkeen inprimagailuen gehienezko kopurua %d da" msgid "No task" msgstr "Zereginik gabe" msgid "Edit Printers" msgstr "Editatu inprimagailuak" msgid "Task Name" msgstr "Zereginaren izena" msgid "Actions" msgstr "Ekintzak" msgid "Task Status" msgstr "Zereginaren egoera" msgid "Sent Time" msgstr "Bidalketa ordua" msgid "There are no tasks to be sent!" msgstr "Ez dago bidaltzeko zereginik!" msgid "No historical tasks!" msgstr "Historikoko zereginik ez!" msgid "Upgrading" msgstr "Eguneratzen" msgid "Syncing" msgstr "Sinkronizatzen" msgid "Printing Finish" msgstr "Inprimaketa bukatuta" msgid "Printing Failed" msgstr "Inprimaketak huts egin du" msgid "Printing Pause" msgstr "Inprimaketa pausatuta" msgid "Pending" msgstr "Egiteke" msgid "Sending" msgstr "Bidaltzen" msgid "Sending Finish" msgstr "Bidalketa bukatuta" msgid "Sending Cancel" msgstr "Bidalketa bertan behera utzita" msgid "Sending Failed" msgstr "Bidalketak huts egin du" msgid "Print Success" msgstr "Inprimaketa arrakastatsua" msgid "Print Failed" msgstr "Inprimaketak huts egin du" msgid "Removed" msgstr "Ezabatuta" msgid "Enable smart filament assign: Assign one filament to multiple nozzles to maximize savings" msgstr "Gaitu filamentuen esleipen adimenduna: esleitu filamentua hainbat pitatara aurrezpena maximizatzeko" msgid "Fila Saving" msgstr "Filamentu-aurrezpena" msgid "Don't remind me again" msgstr "Ez gogorarazi berriro" msgid "No further pop-up will appear. You can reopen it in 'Preferences'" msgstr "Ez da beste leiho gainerakorrik agertuko. 'Hobespenak' atalean berriro ireki dezakezu" msgid "Filament-Saving Mode" msgstr "Filamentua aurrezteko modua" msgid "Convenience Mode" msgstr "Erosotasun-modua" msgid "Custom Mode" msgstr "Modu pertsonalizatua" msgid "Generates filament grouping for the left and right nozzles based on the most filament-saving principles to minimize waste." msgstr "Ezkerreko eta eskuineko pitetarako filamentuen taldekatzea sortzen du, filamentua ahalik eta gehien aurrezteko eta hondakinak minimizatzeko." msgid "Generates filament grouping for the left and right nozzles based on the printer's actual filament status, reducing the need for manual filament adjustment." msgstr "Ezkerreko eta eskuineko pitetarako filamentuen taldekatzea sortzen du inprimagailuaren benetako filamentuen egoeraren arabera, eskuzko doikuntzen beharra murrizteko." msgid "Manually assign filament to the left or right nozzle" msgstr "Esleitu filamentua eskuz ezkerreko edo eskuineko pitari" msgid "Global settings" msgstr "Ezarpen orokorrak" msgid "Video tutorial" msgstr "Bideo-tutoriala" msgid "(Sync with printer)" msgstr "(Sinkronizatu inprimagailuarekin)" #, c-format, boost-format msgid "Error: %s extruder has no available %s nozzle, current group result is invalid." msgstr "Errorea: %s estrusoreak ez du %s pita erabilgarririk; uneko taldekatze-emaitza baliogabea da." msgid "We will slice according to this grouping method:" msgstr "Taldekatze-metodo honen arabera xerratuko da:" msgid "Tip: You can drag the filaments to reassign them to different nozzles." msgstr "Aholkua: filamentuak arrastatu ditzakezu beste pita batzuei berriro esleitzeko." msgid "Please adjust your grouping or click " msgstr "Doitu taldekatzea edo egin klik " msgid " to set nozzle count" msgstr " piten kopurua ezartzeko" msgid "Set the physical nozzle count..." msgstr "Ezarri piten kopuru fisikoa..." msgid "The filament grouping method for current plate is determined by the dropdown option at the slicing plate button." msgstr "Uneko plakaren filamentuen taldekatze-metodoa plaka xerratzeko botoiko goitibeherako aukerak zehazten du." msgid "Connected to Obico successfully!" msgstr "Obico-ra ondo konektatu da!" msgid "Could not connect to Obico" msgstr "Ezin izan da Obico-ra konektatu" msgid "Connected to SimplyPrint successfully!" msgstr "SimplyPrint-era ondo konektatu da!" msgid "Could not connect to SimplyPrint" msgstr "Ezin izan da SimplyPrint-era konektatu" msgid "Internal error" msgstr "Barne-errorea" msgid "Unknown error" msgstr "Errore ezezaguna" msgid "SimplyPrint account not linked. Go to Connect options to set it up." msgstr "SimplyPrint kontua ez dago lotuta. Joan Konektatu aukeretara konfiguratzeko." msgid "Flashforge returned an invalid JSON response." msgstr "Flashforgek JSON erantzun baliogabea itzuli du." msgid "No Flashforge printers were discovered on the local network." msgstr "Ez da Flashforge inprimagailurik aurkitu sare lokalean." msgid "Connected to Flashforge local API successfully." msgstr "Flashforge API lokalarekin behar bezala konektatu da." msgid "Serial connection to Flashforge is working correctly." msgstr "Flashforgerako serie-konexioak behar bezala funtzionatzen du." msgid "Could not connect to Flashforge local API" msgstr "Ezin izan da Flashforge API lokalarekin konektatu" msgid "Could not connect to Flashforge via serial" msgstr "Ezin izan da Flashforgerekin serie-konexio bidez konektatu" msgid "Flashforge local API requires both serial number and access code." msgstr "Flashforge API lokalak serie-zenbakia eta sarbide-kodea behar ditu." msgid "Printer returned an error" msgstr "Inprimagailuak errore bat itzuli du" msgid "Missing system_info in response" msgstr "system_info falta da erantzunean" msgid "Missing printer serial number in response" msgstr "Inprimagailuaren serie-zenbakia falta da erantzunean" msgid "Error parsing response" msgstr "Errorea erantzuna analizatzean" msgid "ElegooLink not detected" msgstr "Ez da ElegooLink detektatu" msgid "Invalid access code" msgstr "Sarbide-kode baliogabea" msgid "CC2 device not detected" msgstr "Ez da CC2 gailua detektatu" msgid "Connection to ElegooLink is working correctly." msgstr "ElegooLink-era konexioa behar bezala dabil." msgid "Could not connect to ElegooLink" msgstr "Ezin izan da ElegooLink-era konektatu" #, boost-format msgid "Error code: %1%" msgstr "Errore-kodea: %1%" msgid "Upload failed" msgstr "Igotzeak huts egin du" msgid "The file has been transferred, but some unknown errors occurred. Please check the device page for the file and try to start printing again." msgstr "Fitxategia transferitu da, baina errore ezezagun batzuk gertatu dira. Egiaztatu fitxategia gailuaren orrian eta saiatu berriro inprimaketa abiarazten." msgid "Failed to open file for upload." msgstr "Ezin izan da igotzeko fitxategia ireki." msgid "Failed to read file chunk for upload." msgstr "Ezin izan da fitxategi-zatia irakurri igotzeko." msgid "CC2 upload failed" msgstr "CC2 igotzeak huts egin du" msgid "The file is empty or could not be read." msgstr "Fitxategia hutsik dago edo ezin izan da irakurri." msgid "Failed to calculate file checksum." msgstr "Ezin izan da fitxategiaren kontrol-batura kalkulatu." msgid "Error code not found" msgstr "Ez da errore-koderik aurkitu" msgid "The printer is busy, please check the device page for the file and try to start printing again." msgstr "Inprimagailua okupatuta dago. Egiaztatu fitxategia gailuaren orrian eta saiatu berriro inprimaketa abiarazten." msgid "The file is lost, please check and try again." msgstr "Fitxategia galdu da; egiaztatu eta saiatu berriro." msgid "The file is corrupted, please check and try again." msgstr "Fitxategia hondatuta dago; egiaztatu eta saiatu berriro." msgid "Transmission abnormality, please check and try again." msgstr "Transmisio-anomalia; egiaztatu eta saiatu berriro." msgid "The file does not match the printer, please check and try again." msgstr "Fitxategia ez dator bat inprimagailuarekin; egiaztatu eta saiatu berriro." msgid "Start print timeout" msgstr "Inprimaketa abiarazteko denbora-muga" msgid "Start print failed" msgstr "Ezin izan da inprimaketa hasi" msgid "Connected to CrealityPrint successfully!" msgstr "CrealityPrint-era behar bezala konektatu da!" msgid "Could not connect to CrealityPrint" msgstr "Ezin izan da CrealityPrint-era konektatu" msgid "Connection timed out. Please check if the printer and computer network are functioning properly, and confirm that they are on the same network." msgstr "Konexioaren denbora-muga gainditu da. Egiaztatu inprimagailuaren eta ordenagailuaren sareek behar bezala funtzionatzen dutela eta sare berean daudela." msgid "The Hostname/IP/URL could not be parsed, please check it and try again." msgstr "Ezin izan da ostalari-izena/IPa/URLa analizatu; egiaztatu eta saiatu berriro." msgid "File/data transfer interrupted. Please check the printer and network, then try it again." msgstr "Fitxategi/datu transferentzia eten da. Egiaztatu inprimagailua eta sarea, eta saiatu berriro." msgid "The provided state is not correct." msgstr "Emandako egoera ez da zuzena." msgid "Please give the required permissions when authorizing this application." msgstr "Eman beharrezko baimenak aplikazio hau baimentzean." msgid "Something unexpected happened when trying to log in, please try again." msgstr "Ustekabeko zerbait gertatu da saioa hasten saiatzean; saiatu berriro." msgid "User canceled." msgstr "Erabiltzaileak bertan behera utzi du." msgid "Head diameter" msgstr "Buruaren diametroa" msgid "Max angle" msgstr "Gehieneko angelua" msgid "Detection radius" msgstr "Detekzio-erradioa" msgid "Selected" msgstr "Hautatuta" msgid "Auto-generate" msgstr "Sortu automatikoki" msgid "Generate brim ears using Max angle and Detection radius" msgstr "Sortu ertz-belarriak gehieneko angelua eta detekzio-erradioa erabiliz" msgid "Add or Select" msgstr "Gehitu edo Hautatu" msgid "Warning: The brim type is not set to \"painted\", the brim ears will not take effect!" msgstr "Abisua: itsaspen ertz mota ez dago \"margotua\" gisa ezarrita; ertz-belarriek ez dute eraginik izango!" msgid "Set the brim type of this object to \"painted\"" msgstr "Ezarri objektu honen itsaspen ertz mota \"margotua\" gisa" msgid "invalid brim ears" msgstr "ertz-belarri baliogabeak" msgid "Brim Ears" msgstr "Ertz-belarriak" msgid "Please select single object." msgstr "Hautatu objektu bakarra." msgid "Entering Brim Ears" msgstr "Ertz-belarrietan sartzen" msgid "Leaving Brim Ears" msgstr "Ertz-belarrietatik irteten" msgid "Zoom Out" msgstr "Txikiagotu zooma" msgid "Zoom In" msgstr "Zooma handitu" msgid "Load skipping objects information failed. Please try again." msgstr "Ezin izan da saltatutako objektuen informazioa kargatu. Saiatu berriro." msgid "Failed to create the temporary folder." msgstr "Ezin izan da aldi baterako karpeta sortu." #, c-format, boost-format msgid "/%d Selected" msgstr "/%d hautatuta" msgid "Nothing selected" msgstr "Ez da ezer hautatu" msgid "Over 64 objects in single plate" msgstr "64 objektu baino gehiago plaka bakarrean" msgid "The current print job cannot be skipped" msgstr "Uneko inprimaketa-lana ezin da saltatu" msgid "Skipping all objects." msgstr "Objektu guztiak saltatzen." msgid "The printing job will be stopped. Continue?" msgstr "Inprimaketa-lana gelditu egingo da. Jarraitu?" #, c-format, boost-format msgid "Skipping %d objects." msgstr "%d objektuak saltatzen." msgid "This action cannot be undone. Continue?" msgstr "Ekintza hau ezin da desegin. Jarraitu?" msgid "Skipping objects." msgstr "Objektuak saltatzen." msgid "Select Filament" msgstr "Hautatu filamentua" msgid "Null Color" msgstr "Kolorerik gabe" msgid "Multiple Color" msgstr "Kolore anitz" msgid "Official Filament" msgstr "Filamentu ofiziala" msgid "More Colors" msgstr "Kolore gehiago" msgid "Network Plug-in Update Available" msgstr "Sareko pluginaren eguneraketa erabilgarri dago" msgid "Bambu Network Plug-in Required" msgstr "Bambu Network plugina behar da" msgid "The Bambu Network Plug-in is corrupted or incompatible. Please reinstall it." msgstr "Bambu sareko plugina hondatuta dago edo bateraezina da. Instalatu berriro." msgid "The Bambu Network Plug-in is required for cloud features, printer discovery, and remote printing." msgstr "Bambu sareko plugina beharrezkoa da hodeiko funtzioetarako, inprimagailuak aurkitzeko eta urruneko inprimaketarako." #, c-format, boost-format msgid "Error: %s" msgstr "Errorea: %s" msgid "Show details" msgstr "Erakutsi xehetasunak" # AI Translated msgid "Hide details" msgstr "Ezkutatu xehetasunak" msgid "Version to install:" msgstr "Instalatu beharreko bertsioa:" msgid "Download and Install" msgstr "Deskargatu eta instalatu" msgid "A new version of the Bambu Network Plug-in is available." msgstr "Bambu Network Plug-inaren bertsio berria erabilgarri dago." #, c-format, boost-format msgid "Current version: %s" msgstr "Uneko Bertsioa: %s" msgid "Update to version:" msgstr "Eguneratu bertsio honetara:" msgid "Don't Ask Again" msgstr "Ez galdetu berriro" msgid "Update Now" msgstr "Eguneratu orain" msgid "(Latest)" msgstr "(Berriena)" # AI Translated msgid "(installed)" msgstr "(instalatuta)" msgid "The Bambu Network Plug-in has been installed successfully." msgstr "Bambu Network Plug-in behar bezala instalatu da." msgid "A restart is required to load the new plug-in. Would you like to restart now?" msgstr "Berrabiarazi egin behar da plugin berria kargatzeko. Orain berrabiarazi nahi duzu?" msgid "Restart Now" msgstr "Berrabiarazi orain" msgid "NO RAMMING AT ALL" msgstr "MUTURRAREN MOLDAKETARIK EZ INONDIK INORA" msgid "Volumetric speed" msgstr "Abiadura bolumetrikoa" msgid "Step file import parameters" msgstr "STEP fitxategia inportatzeko parametroak" msgid "Smaller linear and angular deflections result in higher-quality transformations but increase the processing time." msgstr "Desbideratze lineal eta angeluar txikiagoek kalitate handiagoko eraldaketak ematen dituzte, baina prozesatze-denbora handitzen dute." msgid "Linear Deflection" msgstr "Desbideratze lineala" msgid "Please input a valid value (0.001 < linear deflection < 0.1)" msgstr "Sartu balio balioduna (0.001 < desbideratze lineala < 0.1)" msgid "Angle Deflection" msgstr "Angelu-desbideratzea" msgid "Please input a valid value (0.01 < angle deflection < 1.0)" msgstr "Sartu balio balioduna (0.01 < angelu-desbideratzea < 1.0)" msgid "Split compound and compsolid into multiple objects" msgstr "Banatu compound eta compsolid hainbat objektutan" msgid "Number of triangular facets" msgstr "Aurpegi triangeluarren kopurua" msgid "Calculating, please wait..." msgstr "Kalkulatzen, itxaron..." msgid "Save these settings as default" msgstr "Gorde ezarpen hauek lehenetsi gisa" msgid "If enabled, the values above are stored as the defaults used for future STEP imports (and shown in Preferences)." msgstr "Gaituz gero, goiko balioak etorkizuneko STEP inportazioetan erabiliko diren lehenetsi gisa gordeko dira (eta Hobespenetan erakutsiko dira)." msgid "PresetBundle" msgstr "Aurrezarpen-paketea" msgid "Bundle folder does not exist." msgstr "Pakete-karpeta ez da existitzen." msgid "Failed to open folder." msgstr "Ezin izan da karpeta ireki." msgid "Delete selected bundle from folder and all presets loaded from it?" msgstr "Ezabatu hautatutako paketea karpetatik eta handik kargatutako aurrezarpen guztiak?" msgid "Delete Bundle" msgstr "Ezabatu paketea" msgid "Failed to remove bundle." msgstr "Ezin izan da paketea kendu." msgid "Remove Bundle" msgstr "Kendu paketea" msgid "Unsubscribe bundle?" msgstr "Utzi paketearen harpidetza?" msgid "UnsubscribeBundle" msgstr "Utzi paketearen harpidetza" msgid "Failed to unsubscribe bundle." msgstr "Ezin izan da paketearen harpidetza utzi." msgid "Unsubscribe Bundle" msgstr "Utzi paketearen harpidetza" msgid "ExportPresetBundle" msgstr "Esportatu aurrezarpen-paketea" msgid "Save preset bundle" msgstr "Gorde aurrezarpen sorta" msgid "Performing desktop integration failed - boost::filesystem::canonical did not return appimage path." msgstr "Mahaigain-integrazioak huts egin du: boost::filesystem::canonical-ek ez du AppImage bidea itzuli." msgid "Performing desktop integration failed - Could not find executable." msgstr "Mahaigain-integrazioak huts egin du: ezin izan da exekutagarria aurkitu." msgid "Performing desktop integration failed because the application directory was not found." msgstr "Mahaigain-integrazioak huts egin du aplikazioaren direktorioa ez delako aurkitu." msgid "Performing desktop integration failed - could not create Gcodeviewer desktop file. OrcaSlicer desktop file was probably created successfully." msgstr "Mahaigain-integrazioak huts egin du: ezin izan da Gcodeviewer mahaigaineko fitxategia sortu. Seguruenik OrcaSlicer mahaigaineko fitxategia behar bezala sortu da." msgid "Performing downloader desktop integration failed - boost::filesystem::canonical did not return appimage path." msgstr "Deskargatzailearen mahaigain-integrazioak huts egin du: boost::filesystem::canonical-ek ez du AppImage bidea itzuli." msgid "Performing downloader desktop integration failed - Could not find executable." msgstr "Deskargatzailearen mahaigain-integrazioak huts egin du: ezin izan da exekutagarria aurkitu." msgid "Performing downloader desktop integration failed because the application directory was not found." msgstr "Deskargatzailearen mahaigain-integrazioak huts egin du aplikazioaren direktorioa ez delako aurkitu." msgid "Desktop Integration" msgstr "Mahaigain-integrazioa" msgid "" "Desktop Integration sets this binary to be searchable by the system.\n" "\n" "Press \"Perform\" to proceed." msgstr "" "Mahaigain-integrazioak sistema bitar hau bilatzeko gai izatea ahalbidetzen du.\n" "\n" "Sakatu \"Egin\" jarraitzeko." msgid "The download has failed" msgstr "Deskargak huts egin du" #. TRN %1% = file path #, boost-format msgid "Can't create file at %1%" msgstr "Ezin da fitxategia sortu hemen: %1%" msgid "Archive preview" msgstr "Artxiboaren aurrebista" msgid "Open File" msgstr "Ireki fitxategia" msgid "AMS Dryness Control" msgstr "AMS Lehortasun-kontrola" msgid "Filament Drying Settings" msgstr "Filamentua lehortzearen ezarpenak" msgid "Stopping" msgstr "Gelditzen" msgid "Unable to dry temporarily due to ..." msgstr "Aldi baterako ezin da lehortu arrazoi honengatik:" msgid "Drying Error" msgstr "Lehortze-errorea" msgid "Please check the Assistant for troubleshooting" msgstr "Mesedez, kontsultatu Laguntzailea arazoak konpontzeko" msgid "Please remove and store the filament (as shown)." msgstr "Mesedez, kendu eta gorde filamentua (erakusten den bezala)." msgid "The AMS can rotate the filament which is properly stored, providing better drying results." msgstr "AMSak behar bezala gordetako filamentua bira dezake, eta horrek lehortze-emaitza hobeak lortzea ahalbidetzen du." msgid "Rotate spool when drying" msgstr "Biratu bobina lehortzean" msgctxt "amsdrying" msgid "Back" msgstr "Atzea" msgid "Drying-Heating" msgstr "Lehortzen-Berotzen" msgid "Drying-Dehumidifying" msgstr "Lehortzen-Hezetasuna kentzen" msgid " maximum drying temperature is " msgstr " lehortze-tenperatura maximoa da " msgid " minimum drying temperature is " msgstr " lehortze-tenperatura minimoa da " msgid "This filament may not be completely dried." msgstr "Baliteke filamentu hau erabat lehortuta ez egotea." msgid "This AMS is currently printing. To ensure print quality, the drying temperature cannot exceed the recommended drying temperature." msgstr "AMS hau une honetan inprimatzen ari da. Inprimatze-kalitatea bermatzeko, lehortze-tenperaturak ezin du gainditu gomendatutako lehortze-tenperatura." msgid "The temperature shall not exceed the filament's heat distortion temperature" msgstr "Tenperaturak ez du gainditu behar filamentuaren beroagatiko deformazio-tenperatura" msgid "Minimum time value cannot be less than 1." msgstr "Gutxieneko denbora-balioak ezin du 1 baino txikiagoa izan." msgid "Maximum time value cannot be greater than 24." msgstr "Gutxieneko denbora-balioak ezin du 24 baino handiagoa izan." msgid "Insufficient power" msgstr "Potentzia nahikorik ez" msgid " Too many AMS drying simultaneously. Please plug in the power or stop other drying processes before starting." msgstr " Aldi berean lehortzen ari diren AMS gehiegi daude. Mesedez, konektatu elikatze-kablea edo gelditu beste lehortze-prozesu batzuk martxan jarri aurretik." msgid "AMS is busy" msgstr "AMS lanpetuta dago" msgid " AMS is calibrating | reading RFID | loading/unloading material, please wait." msgstr " AMS kalibratzen ari da | RFID irakurtzen ari da | materiala kargatzen/deskargatzen ari da; mesedez, itxaron." msgid "Filament in AMS outlet" msgstr "Filamentua AMSren irteeran" msgid " The high drying temperature may cause AMS blockage, please unload first." msgstr " Lehortze-tenperatura altuak AMSa blokeatzea eragin dezake; mesedez, hustu lehenik." msgid "Initiating AMS drying" msgstr "AMS lehortzea abiarazten" msgid "Not supported in 2D mode" msgstr "Ez da onartzen 2D moduan" msgid "Task in progress" msgstr "Zeregina martxan" msgid " The AMS might be in use during Task." msgstr " Baliteke AMSa zereginean zehar okupatuta egotea." msgid " Firmware update in progress, please wait..." msgstr " Firmware-aren eguneratzea martxan; mesedez, itxaron..." msgid " Please plug in the power and then use the drying function." msgstr " Mesedez, konektatu argindarrera eta, ondoren, erabili lehortze-funtzioa." msgid " The high drying temperature may cause AMS blockage. Please unload the filament manually before proceeding." msgstr " Lehortze-tenperatura altuak AMSa blokeatzea eragin dezake. Mesedez, deskargatu filamentua eskuz jarraitu aurretik." msgid "System is busy" msgstr "Sistemaren lanpetuta dago" msgid " Initiating other drying processes, please wait a few seconds..." msgstr " Lehortze-prozesu gehigarriak abiarazten; mesedez, itxaron segundo batzuk..." msgid "For better drying results, remove the filament and allow it to rotate." msgstr "Lehortze-emaitza hobeak lortzeko, kendu filamentua eta baimendu biratzea." msgid "The AMS will automatically rotate the stored filament slots to enhance the drying performance." msgstr "AMSak automatikoki biratuko ditu biltegiratutako filamentuen artekak, lehortze-errendimendua hobetzeko." msgid "Alternatively, you can dry the filament without removing it." msgstr "Bestela, filamentua lehortu dezakezu hura kendu gabe." msgid "Unknown filaments will be treated as PLA." msgstr "Identifikatu gabeko filamentuak PLA gisa tratatuko dira." msgid "Please store the filament marked with an exclamation mark." msgstr "Mesedez, gorde harridura-marka duen filamentua." msgid "Filament left in the feeder during drying may soften because the drying temperature exceeds the softening point of materials like PLA and TPU." msgstr "Lehortze-prozesuan elikagailuan geratzen den filamentua bigundu egin daiteke; izan ere, lehortze-tenperaturak PLA eta TPU bezalako materialen biguntze-puntua gainditzen du." msgid "Starting: Checking adapter connection" msgstr "Abiarazten: Egokigailuaren konexioa egiaztatzen" msgid "Starting: Checking filament status" msgstr "Abiarazten: filamentuaren egoera egiaztatzen" msgid "Starting: Checking drying presets" msgstr "Abiarazten: Lehortze-aurrezarpenak egiaztatzen" msgid "Starting: Checking filament location" msgstr "Filamentuaren lokalizazioaren egiaztapenarekin hasten" msgid "Starting: Checking air intake" msgstr "Abiarazten: Aire-sarrera egiaztatzen" msgid "Starting: Checking air vent" msgstr "Abiarazten: Aire-hustubidea egiaztatzen" msgid "The filament may not be compatible with the current machine settings. Generic filament presets will be used." msgstr "Baliteke filamentua uneko makinaren ezarpenekin bateragarria ez izatea. Filamentuaren aurrezarpen generikoak erabiliko dira." msgid "The filament model is unknown. Still using the previous filament preset." msgstr "Filamentu-modeloa ezezaguna da. Aurreko filamentuen aurrezarpena erabiltzen jarraituko da." msgid "The filament model is unknown. Generic filament presets will be used." msgstr "Filamentu-modeloa ezezaguna da. Filamentuaren aurrezarpen generikoak erabiliko dira." msgid "The filament may not be compatible with the current machine settings. A random filament preset will be used." msgstr "Baliteke filamentua uneko makinaren ezarpenekin bateragarria ez izatea. Ausazko filamentuen aurrezarpen bat erabiliko da." msgid "The filament model is unknown. A random filament preset will be used." msgstr "Filamentu-modeloa ezezaguna da. Ausazko filamentuen aurrezarpen bat erabiliko da." #: resources/data/hints.ini: [hint:Precise wall] msgid "" "Precise wall\n" "Did you know that turning on precise wall can improve precision and layer consistency?" msgstr "" "Horma zehatza\n" "Ba al zenekien horma zehatza aktibatzeak doitasuna eta geruzen koherentzia hobetu ditzakeela?" #: resources/data/hints.ini: [hint:Sandwich mode] msgid "" "Sandwich mode\n" "Did you know that you can use sandwich mode (inner-outer-inner) to improve precision and layer consistency if your model doesn't have very steep overhangs?" msgstr "" "Sandwich modua\n" "Ba al zenekien sandwich modua (barrukoa-kanpokoa-barrukoa) erabil dezakezula doitasuna eta geruzen koherentzia hobetzeko, zure modeloak irtengune oso malkartsurik ez badu?" #: resources/data/hints.ini: [hint:Chamber temperature] msgid "" "Chamber temperature\n" "Did you know that OrcaSlicer supports chamber temperature?" msgstr "" "Ganberako tenperatura\n" "Ba al zenekien OrcaSlicerrek ganberako tenperatura onartzen duela?" #: resources/data/hints.ini: [hint:Calibration] msgid "" "Calibration\n" "Did you know that calibrating your printer can do wonders? Check out our beloved calibration solution in OrcaSlicer." msgstr "" "Kalibrazioa\n" "Ba al zenekien inprimagailua kalibratzeak emaitza bikainak eman ditzakeela? Begiratu OrcaSlicerreko gure kalibrazio-soluzio kutuna." #: resources/data/hints.ini: [hint:Auxiliary fan] msgid "" "Auxiliary fan\n" "Did you know that OrcaSlicer supports Auxiliary part cooling fan?" msgstr "" "Haizagailu osagarria\n" "Ba al zenekien OrcaSlicerrek piezak hozteko haizagailu osagarria onartzen duela?" #: resources/data/hints.ini: [hint:Air filtration] msgid "" "Air filtration/Exhaust Fan\n" "Did you know that OrcaSlicer can support Air filtration/Exhaust Fan?" msgstr "" "Aire-iragazketa/Erauzte-haizagailua\n" "Ba al zenekien OrcaSlicerrek aire-iragazketa/erauzte-haizagailua onar dezakeela?" #: resources/data/hints.ini: [hint:G-code window] msgid "" "G-code window\n" "You can turn on/off the G-code window by pressing the C key." msgstr "" "G-codearen leihoa\n" "G-codearen leihoa aktibatu/desaktibatu dezakezu C tekla sakatuta." #: resources/data/hints.ini: [hint:Switch workspaces] msgid "" "Switch workspaces\n" "You can switch between Prepare and Preview workspaces by pressing the Tab key." msgstr "" "Aldatu lan-eremuak\n" "Prestatu eta Aurrebista lan-eremuen artean alda dezakezu Tab tekla sakatuta." #: resources/data/hints.ini: [hint:How to use keyboard shortcuts] msgid "" "How to use keyboard shortcuts\n" "Did you know that Orca Slicer offers a wide range of keyboard shortcuts and 3D scene operations?" msgstr "" "Nola erabili laster-teklak\n" "Ba al zenekien OrcaSlicerrek laster-tekla eta 3D eszenako eragiketa ugari eskaintzen dituela?" #: resources/data/hints.ini: [hint:Reverse on even] msgid "" "Reverse on even\n" "Did you know that Reverse on even feature can significantly improve the surface quality of your overhangs? However, it can cause wall inconsistencies so use carefully!" msgstr "" "Alderantzikatu bikoitietan\n" "Ba al zenekien Alderantzikatu bikoitietan funtzioak irtenguneen gainazal-kalitatea nabarmen hobetu dezakeela? Hala ere, horman irregulartasunak eragin ditzake; beraz, kontu handiz erabili!" #: resources/data/hints.ini: [hint:Cut Tool] msgid "" "Cut Tool\n" "Did you know that you can cut a model at any angle and position with the cutting tool?" msgstr "" "Ebaketa-tresna\n" "Ba al zenekien ebaketa-tresnarekin modelo bat edozein angelutan eta posiziotan ebaki dezakezula?" #: resources/data/hints.ini: [hint:Fix Model] msgid "" "Fix Model\n" "Did you know that you can fix a corrupted 3D model to avoid a lot of slicing problems on the Windows system?" msgstr "" "Konpondu modeloa\n" "Ba al zenekien hondatutako 3D modelo bat konpon dezakezula Windows sisteman xerratze-arazo asko saihesteko?" #: resources/data/hints.ini: [hint:Timelapse] msgid "" "Timelapse\n" "Did you know that you can generate a timelapse video during each print?" msgstr "" "Timelapsea\n" "Ba al zenekien inprimaketa bakoitzean timelapse bideo bat sor dezakezula?" #: resources/data/hints.ini: [hint:Auto-Arrange] msgid "" "Auto-Arrange\n" "Did you know that you can auto-arrange all the objects in your project?" msgstr "" "Antolatu automatikoki\n" "Ba al zenekien zure proiektuko objektu guztiak automatikoki antola ditzakezula?" #: resources/data/hints.ini: [hint:Auto-Orient] msgid "" "Auto-Orient\n" "Did you know that you can rotate objects to an optimal orientation for printing with a simple click?" msgstr "" "Orientatu automatikoki\n" "Ba al zenekien objektuak inprimatzeko orientazio optimora biratu ditzakezula klik bakar batekin?" #: resources/data/hints.ini: [hint:Lay on Face] msgid "" "Lay on Face\n" "Did you know that you can quickly orient a model so that one of its faces sits on the print bed? Select the \"Place on face\" function or press the F key." msgstr "" "Jarri aurpegian\n" "Ba al zenekien modelo bat azkar orienta dezakezula haren aurpegietako bat inprimatze-ohean bermatzeko? Hautatu \"Jarri aurpegian\" funtzioa edo sakatu F tekla." #: resources/data/hints.ini: [hint:Object List] msgid "" "Object List\n" "Did you know that you can view all objects/parts in a list and change settings for each object/part?" msgstr "" "Objektuen zerrenda\n" "Ba al zenekien objektu/pieza guztiak zerrenda batean ikus ditzakezula eta objektu/pieza bakoitzaren ezarpenak aldatu?" #: resources/data/hints.ini: [hint:Search Functionality] msgid "" "Search Functionality\n" "Did you know that you use the Search tool to quickly find a specific Orca Slicer setting?" msgstr "" "Bilaketa-funtzioa\n" "Ba al zenekien Bilatu tresna erabil dezakezula OrcaSlicerren ezarpen zehatz bat azkar aurkitzeko?" #: resources/data/hints.ini: [hint:Simplify Model] msgid "" "Simplify Model\n" "Did you know that you can reduce the number of triangles in a mesh using the Simplify mesh feature? Right-click the model and select Simplify model." msgstr "" "Sinplifikatu modeloa\n" "Ba al zenekien sare bateko triangelu kopurua murriztu dezakezula Sinplifikatu sarea funtzioarekin? Egin eskuineko klik modeloan eta hautatu Sinplifikatu modeloa." #: resources/data/hints.ini: [hint:Slicing Parameter Table] msgid "" "Slicing Parameter Table\n" "Did you know that you can view all objects/parts on a table and change settings for each object/part?" msgstr "" "Xerratze-parametroen taula\n" "Ba al zenekien objektu/pieza guztiak taula batean ikus ditzakezula eta objektu/pieza bakoitzaren ezarpenak aldatu?" #: resources/data/hints.ini: [hint:Split to Objects/Parts] msgid "" "Split to Objects/Parts\n" "Did you know that you can split a big object into small ones for easy colorizing or printing?" msgstr "" "Banatu objektu/piezetan\n" "Ba al zenekien objektu handi bat txikiagotan bana dezakezula errazago koloreztatzeko edo inprimatzeko?" #: resources/data/hints.ini: [hint:Subtract a Part] msgid "" "Subtract a Part\n" "Did you know that you can subtract one mesh from another using the Negative part modifier? That way you can, for example, create easily resizable holes directly in Orca Slicer." msgstr "" "Kendu pieza bat\n" "Ba al zenekien sare bat beste bati ken diezaiokezula pieza negatiboaren aldatzailea erabiliz? Horrela, adibidez, erraz tamainatu daitezkeen zuloak sor ditzakezu zuzenean OrcaSlicerren." #: resources/data/hints.ini: [hint:STEP] msgid "" "STEP\n" "Did you know that you can improve your print quality by slicing a STEP file instead of an STL?\n" "Orca Slicer supports slicing STEP files, providing smoother results than a lower resolution STL. Give it a try!" msgstr "" "STEP\n" "Ba al zenekien inprimatze-kalitatea hobetu dezakezula STL baten ordez STEP fitxategi bat xerratuta?\n" "OrcaSlicerrek STEP fitxategiak xerratzea onartzen du, eta bereizmen baxuagoko STL batek baino emaitza leunagoak ematen ditu. Probatu!" #: resources/data/hints.ini: [hint:Z seam location] msgid "" "Z seam location\n" "Did you know that you can customize the location of the Z seam, and even paint it on your print, to have it in a less visible location? This improves the overall look of your model. Check it out!" msgstr "" "Z josturaren kokapena\n" "Ba al zenekien Z josturaren kokapena pertsonaliza dezakezula, baita inprimaketan margotu ere, gutxiago ikusten den leku batean egon dadin? Horrek modeloaren itxura orokorra hobetzen du. Begiratu!" #: resources/data/hints.ini: [hint:Fine-tuning for flow rate] msgid "" "Fine-tuning for flow rate\n" "Did you know that flow rate can be fine-tuned for even better-looking prints? Depending on the material, you can improve the overall finish of the printed model by doing some fine-tuning." msgstr "" "Fluxu-tasaren doikuntza fina\n" "Ba al zenekien Fluxu-tasa xeheki doitu daitekeela inprimaketa itxura hobea lortzeko? Materialaren arabera, inprimatutako modeloaren akabera orokorra hobetu dezakezu doikuntza fin batzuk eginez." #: resources/data/hints.ini: [hint:Split your prints into plates] msgid "" "Split your prints into plates\n" "Did you know that you can split a model that has a lot of parts into individual plates ready to print? This will simplify the process of keeping track of all the parts." msgstr "" "Banatu inprimaketak plaketan\n" "Ba al zenekien pieza asko dituen modelo bat inprimatzeko prest dauden plaka banatan bana dezakezula? Horrek pieza guztien jarraipena egitea erraztuko du." #: resources/data/hints.ini: [hint:Speed up your print with Adaptive Layer #: Height] msgid "" "Speed up your print with Adaptive Layer Height\n" "Did you know that you can print a model even faster by using the Adaptive Layer Height option? Check it out!" msgstr "" "Bizkortu inprimaketa Geruza-altuera egokigarriarekin\n" "Ba al zenekien modelo bat are azkarrago inprima dezakezula Geruza-altuera egokigarria erabiliz? Probatu!" #: resources/data/hints.ini: [hint:Support painting] msgid "" "Support painting\n" "Did you know that you can paint the location of your supports? This feature makes it easy to place the support material only on the sections of the model that actually need it." msgstr "" "Euskarrien pintaketa\n" "Ba al zenekien euskarrien kokapena margotu dezakezula? Funtzio honek errazten du euskarri-materiala benetan behar duten modeloaren zatietan bakarrik jartzea." #: resources/data/hints.ini: [hint:Different types of supports] msgid "" "Different types of supports\n" "Did you know that you can choose from multiple types of supports? Tree supports work great for organic models while saving filament and improving print speed. Check them out!" msgstr "" "Euskarri mota desberdinak\n" "Ba al zenekien hainbat euskarri mota aukera ditzakezula? Zuhaitz-euskarriek oso ondo funtzionatzen dute modelo organikoekin, filamentua aurrezten dute eta abiadura hobetzen dute. Probatu!" #: resources/data/hints.ini: [hint:Printing Silk Filament] msgid "" "Printing Silk Filament\n" "Did you know that Silk filament needs special consideration to print successfully? A higher temperature and lower speed are always recommended for the best results." msgstr "" "Zetazko filamentua inprimatzea\n" "Ba al zenekien zetazko filamentuak arreta berezia behar duela behar bezala inprimatzeko? Tenperatura handiagoa eta abiadura txikiagoa gomendatzen dira emaitza onenak lortzeko." #: resources/data/hints.ini: [hint:Brim for better adhesion] msgid "" "Brim for better adhesion\n" "Did you know that when printed models have a small contact interface with the printing surface, it's recommended to use a brim?" msgstr "" "Itsaspen ertza itsaste hobea lortzeko\n" "Ba al zenekien inprimatutako modeloek inprimatze-gainazalarekin kontaktu-eremu txikia dutenean itsaspen ertza erabiltzea gomendatzen dela?" #: resources/data/hints.ini: [hint:Set parameters for multiple objects] msgid "" "Set parameters for multiple objects\n" "Did you know that you can set slicing parameters for all selected objects at once?" msgstr "" "Ezarri parametroak hainbat objekturentzat\n" "Ba al zenekien hautatutako objektu guztien xerratze-parametroak batera ezar ditzakezula?" #: resources/data/hints.ini: [hint:Stack objects] msgid "" "Stack objects\n" "Did you know that you can stack objects as a whole one?" msgstr "" "Pilatu objektuak\n" "Ba al zenekien objektuak osotasun bakar gisa pila ditzakezula?" #: resources/data/hints.ini: [hint:Flush into support/objects/infill] msgid "" "Flush into support/objects/infill\n" "Did you know that you can reduce wasted filament by flushing it into support/objects/infill during filament changes?" msgstr "" "Purgatu euskarrietara/objektuetara/betegarrira\n" "Ba al zenekien filamentua alferrik galtzea murriztu dezakezula aldaketetan euskarrira, objektuetara edo betegarrira purgatuz?" #: resources/data/hints.ini: [hint:Improve strength] msgid "" "Improve strength\n" "Did you know that you can use more wall loops and higher sparse infill density to improve the strength of the model?" msgstr "" "Hobetu erresistentzia\n" "Ba al zenekien horma-begizta gehiago eta dentsitate baxuko betegarriaren dentsitate handiagoa erabil ditzakezula modeloaren erresistentzia hobetzeko?" #: resources/data/hints.ini: [hint:When do you need to print with the printer #: door opened] msgid "" "When do you need to print with the printer door opened?\n" "Did you know that opening the printer door can reduce the probability of extruder/hotend clogging when printing lower temperature filament with a higher enclosure temperature? There is more info about this in the Wiki." msgstr "" "Noiz inprimatu behar da inprimagailuaren atea irekita?\n" "Ba al zenekien inprimagailuaren atea irekitzeak estrusorea/hotend-a buxatzeko probabilitatea murriztu dezakeela tenperatura baxuagoko filamentua itxituraren tenperatura handiagoarekin inprimatzean? Informazio gehiago Wikian." #: resources/data/hints.ini: [hint:Avoid warping] msgid "" "Avoid warping\n" "Did you know that when printing materials that are prone to warping such as ABS, appropriately increasing the heatbed temperature can reduce the probability of warping?" msgstr "" "Saihestu okertzea\n" "Ba al zenekien ABS bezalako okertzeko joera duten materialak inprimatzean ohe beroaren tenperatura egoki igotzeak okertzeko probabilitatea murriztu dezakeela?" #~ msgid "Print order within a single layer." #~ msgstr "Geruza bakarreko inprimatze-ordena." #~ msgid "Bottom" #~ msgstr "Behekoa" #~ msgid "Front" #~ msgstr "Aurrekoa" #~ msgid "Rear" #~ msgstr "Atzekoa" #~ msgid "Enter" #~ msgstr "Sartu" #~ msgid "Esc" #~ msgstr "Esc" #~ msgid "Del" #~ msgstr "Ezabatu" #~ msgid "Backspace" #~ msgstr "Atzera-tekla" #~ msgid "Arrow Up" #~ msgstr "Gora gezia" #~ msgid "Arrow Down" #~ msgstr "Behera gezia" #~ msgid "Arrow Left" #~ msgstr "Ezker gezia" #~ msgid "Arrow Right" #~ msgstr "Eskuin gezia" #~ msgid "End" #~ msgstr "Amaiera" #~ msgid "Hotend" #~ msgstr "Hotend-a" #~ msgid "Skip for Now" #~ msgstr "Saltatu oraingoz" #~ msgid "Remind Later" #~ msgstr "Gogorarazi geroago" #~ msgid "Skip Version" #~ msgstr "Saltatu bertsioa" #~ msgid "Restart Later" #~ msgstr "Berrabiarazi geroago" #~ msgid "Invalid spacing supplied to Flow::with_spacing(), check your layer height and extrusion width." #~ msgstr "Flow::with_spacing() funtzioari tarte baliogabea eman zaio; egiaztatu geruza-altuera eta estrusio-zabalera" #~ msgid "Alt + Mouse wheel" #~ msgstr "Alt + Saguaren gurpila" #~ msgid "Ctrl + Mouse wheel" #~ msgstr "Ctrl + Saguaren gurpila" #~ msgid "Pen size" #~ msgstr "Boligrafoaren tamaina" #~ msgid "Shift + Left mouse button" #~ msgstr "Shift + Saguaren ezkerreko botoia" #~ msgid "Erase all painting" #~ msgstr "Ezabatu margotutako guztia" #~ msgid "Highlight overhang areas" #~ msgstr "Hegalak dituzten guneak nabarmendu" #~ msgid "Perform" #~ msgstr "Gauzatu" #~ msgid "On overhangs only" #~ msgstr "Hegaletan soilik" #~ msgid "Support Generated" #~ msgstr "Euskarriak sortuta" #~ msgid "Lay on face" #~ msgstr "Oinarritzat jartzeko aldea aukeratu" #~ msgid "Pen shape" #~ msgstr "Boligrafoaren forma" #~ msgid "Key 1~9" #~ msgstr "1~9 tecla" #~ msgid "Alt + Shift + Enter" #~ msgstr "Alt + Shift + Sartu" #~ msgid "in" #~ msgstr "hazbete" #~ msgid "Object Operations" #~ msgstr "Objektu-eragiketak" #~ msgid "Volume Operations" #~ msgstr "Bolumen-eragiketak" #~ msgid "Group Operations" #~ msgstr "Multzo-eragiketak" #~ msgid "Set Position" #~ msgstr "Kokapena ezarri" #~ msgid "Set Orientation" #~ msgstr "Orientazioa ezarri" #~ msgid "Set Scale" #~ msgstr "Eskala ezarri" #~ msgid "Reset Position" #~ msgstr "Berrezarri kokapena" #~ msgid "Reset Rotation" #~ msgstr "Berrezarri biraketa" #~ msgid "World coordinates" #~ msgstr "Koordenatu globalak" #~ msgid "Object coordinates" #~ msgstr "Objektuaren koordenatuak" #~ msgid "°" #~ msgstr "°" #~ msgid "uniform scale" #~ msgstr "eskala uniformea" #~ msgid "Left click" #~ msgstr "Ezkerreko botoiarekin klik egin" #~ msgid "Right click" #~ msgstr "Eskuineko botoiarekin klik egin" #~ msgid "Reset cut" #~ msgstr "Ebaketa berrezarri" #~ msgid "non-manifold edges be caused by cut tool, do you want to fix it now?" #~ msgstr "ebaketa-eragiketak tolestu gabeko ertzak eragin ditu. Orain konpondu nahi dituzu?" #, boost-format #~ msgid "%1%" #~ msgstr "%1%" #~ msgid "Can't apply when processing preview." #~ msgstr "Ezin da aplikatu prozesuaren aurrebistan." #~ msgid "Entering Seam painting" #~ msgstr "Jostura pintatzeko atalean sartzen" #~ msgid "" #~ "Embedded\n" #~ "depth" #~ msgstr "" #~ "Inkrustatuta\n" #~ "sakonera" #~ msgid "Shift + Mouse move up or down" #~ msgstr "Shift + Sagua gora edo behera mugitu" #~ msgid "Rotate text Clock-wise." #~ msgstr "Biratu testua erlojuaren orratzen noranzkoan." #~ msgid "Change to another .svg file" #~ msgstr "Aldatu beste .svg fitxategi batera" #~ msgid "Save as '.svg' file" #~ msgstr "Gorde '.svg' fitxategi gisa" #~ msgid "Select feature" #~ msgstr "Hautatu ezaugarria" #~ msgid "Configuration package was loaded, but some values were not recognized." #~ msgstr "Konfigurazio-paketea kargatu da, baina balio batzuk ez dira ezagutu." #, boost-format #~ msgid "Configuration file \"%1%\" was loaded, but some values were not recognized." #~ msgstr "\"%1%\" konfigurazio-fitxategia kargatu da, baina balio batzuk ez dira ezagutu." #~ msgid "The Orca Slicer needs an upgrade" #~ msgstr "Orca Slicer-ek eguneraketa bat behar du" #~ msgid "Choose one file (3mf):" #~ msgstr "Aukeratu fitxategi bat (3mf):" #~ msgid "Choose one or more files (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" #~ msgstr "Aukeratu fitxategi bat edo gehiago (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" #~ msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):" #~ msgstr "Aukeratu fitxategi bat edo gehiago (3mf/step/stl/svg/obj/amf):" #~ msgid "Choose one file (gcode/3mf):" #~ msgstr "Aukeratu fitxategi bat (gcode/3mf):" #~ msgid "You can keep the modified presets to the new project, discard or save changes as new presets." #~ msgstr "Aldatutako aurrezarpenak proiektu berrian mantendu ditzakezu, baztertu edo aldaketak gorde aurrezarpen berri gisa." #, boost-format #~ msgid "Fatal error, exception caught: %1%" #~ msgstr "Errore oso larria, detektatutako salbuespena: %1%" #~ msgid "Top Solid Layers" #~ msgstr "Goiko geruza solidoak" #~ msgid "Top Minimum Shell Thickness" #~ msgstr "Goialdean gutxieneko oskolaren lodiera" #~ msgid "Bottom Solid Layers" #~ msgstr "Beheko geruza solidoak" #~ msgid "Bottom Minimum Shell Thickness" #~ msgstr "Behealdean gutxieneko oskolaren lodiera" #~ msgid "Fuzzy Skin" #~ msgstr "Gainazal zimurra" #~ msgid "Extrusion Width" #~ msgstr "Estrusio-zabalera" #~ msgid "Add part" #~ msgstr "Gehitu pieza" #~ msgid "Add negative part" #~ msgstr "Gehitu pieza negatiboa" #~ msgid "Add modifier" #~ msgstr "Gehitu aldatzailea" #~ msgid "Add support blocker" #~ msgstr "Gehitu euskarri blokeatzailea" #~ msgid "Add support enforcer" #~ msgstr "Gehitu euskarrien sendotzailea" #~ msgid "Height range Modifier" #~ msgstr "Altuera-tartearen aldatzailea" #~ msgid "Add settings" #~ msgstr "Gehitu ezarpenak" #~ msgid "Change type" #~ msgstr "Aldatu mota" #~ msgid "Set as an individual object" #~ msgstr "Ezarri hau objektu indibidual gisa" #~ msgid "Set as individual objects" #~ msgstr "Ezarri hauek objektu indibidual gisa" #~ msgid "Fix model" #~ msgstr "Konpondu modeloa" #~ msgid "Replace with STL" #~ msgstr "STLarekin ordezkatu" #~ msgid "Replace the selected part with new STL" #~ msgstr "Ordeztu hautatutako pieza STL berri batekin" #~ msgid "Convert from inches" #~ msgstr "Bihurtu hazbeteetatik" #~ msgid "Restore to inches" #~ msgstr "Leheneratu hazbeteetara" #~ msgid "Convert from meters" #~ msgstr "Bihurtu metroetatik" #~ msgid "Restore to meters" #~ msgstr "Leheneratu metroetara" #~ msgid "Assemble the selected objects to an object with multiple parts" #~ msgstr "Multzokatu hautatutako objektuak pieza ugariko objektu bakarrean" #~ msgid "Assemble the selected objects to an object with single part" #~ msgstr "Multzokatu hautatutako objektuak pieza bakarreko objektu batean" #~ msgid "Along X axis" #~ msgstr "X ardatzarekiko" #~ msgid "Mirror along the X axis" #~ msgstr "Islatu X ardatzarekiko" #~ msgid "Along Y axis" #~ msgstr "Y ardatzarekiko" #~ msgid "Mirror along the Y axis" #~ msgstr "Islatu Y ardatzarekiko" #~ msgid "Along Z axis" #~ msgstr "Z ardatzarekiko" #~ msgid "Mirror along the Z axis" #~ msgstr "Islatu Z ardatzarekiko" #~ msgid "To objects" #~ msgstr "Objektuetan" #~ msgid "To parts" #~ msgstr "Piezetan" #~ msgid "Auto orient the object to improve print quality." #~ msgstr "Automatikoki orientatu inprimatze-kalitatea hobetzeko." #~ msgid "select all objects on current plate" #~ msgstr "uneko plakako objektu guztiak hautatu" #~ msgid "delete all objects on current plate" #~ msgstr "uneko plakako objektu guztiak ezabatu" #~ msgid "arrange current plate" #~ msgstr "antolatu uneko plaka" #~ msgid "reload all from disk" #~ msgstr "birkargatu guztia diskotik" #~ msgid "auto rotate current plate" #~ msgstr "Biratu automatikoki uneko plaka" #~ msgid "Right click the icon to fix model object" #~ msgstr "Egin klik ikonoan eskuineko botoiarekin objektua konpontzeko" #~ msgid "Right button click the icon to drop the object settings" #~ msgstr "Eskuineko botoia klikatu ikonoan objektuaren ezarpenak baztertzeko" #~ msgid "Right button click the icon to drop the object printable property" #~ msgstr "Egin klik eskuineko botoiarekin ikonoan objektuaren inprimagarritasun propietateak baztertzeko" #~ msgid "Click the icon to toggle printable property of the object" #~ msgstr "Egin klik ikonoan objektuaren inprimagarritasun propietateak aldatzeko" #~ msgid "Click the icon to edit color painting of the object" #~ msgstr "Egin klik ikonoan objektuaren kolore-margoketa editatzeko" #~ msgid "" #~ "This action will break a cut correspondence.\n" #~ "After that model consistency can't be guaranteed.\n" #~ "\n" #~ "To manipulate with solid parts or negative volumes you have to invalidate cut information first." #~ msgstr "" #~ "Ekintza honek ebaketa-korrespondentzia bat apurtuko du.\n" #~ "Horren ostean modeloaren trinkotasuna ezingo da bermatu.\n" #~ "\n" #~ "Pieza solidoak edo bolumen negatiboak manipulatzeko, ebaketa-informazioa baliogabetu behar duzu lehenik." #~ msgid "The target object contains only one part and cannot be split." #~ msgstr "Helburuko objektuak pieza bakarra du eta ezin da zatitu." #~ msgid "Object Settings to modify" #~ msgstr "Aldatu beharreko objektuaren ezarpenak" #~ msgid "Part Settings to modify" #~ msgstr "Aldatu beharreko piezaren ezarpenak" #~ msgid "Layer range Settings to modify" #~ msgstr "Aldatu beharreko geruzen ezarpenak" #~ msgid "The type of the last solid object part is not to be changed." #~ msgstr "Objektu solidoaren azken pieza zein motatakoa den ez da aldatu behar." #~ msgid "Following model object has been repaired" #~ msgid_plural "Following model objects have been repaired" #~ msgstr[0] "Ondorengo objektu-modeloa konpondu da" #~ msgstr[1] "Ondorengo objektua-modeloak konpondu dira" #~ msgid "Failed to repair following model object" #~ msgid_plural "Failed to repair following model objects" #~ msgstr[0] "Ezin izan da ondorengo objektu-modeloa konpondu" #~ msgstr[1] "Ezin izan dira ondorengo objektu-modeloak konpondu" #~ msgid "one cell can only be copied to one or multiple cells in the same column" #~ msgstr "gelaxka bat zutabe bereko gelaxka batean edo batzuetan baino ezin da kopiatu" #~ msgid "Object/Part Setting" #~ msgstr "Objektuaren/Piezaren Ezarpenak" #~ msgid "Open Preferences." #~ msgstr "Ireki Hobespenak." #~ msgid "Open next tip." #~ msgstr "Ireki hurrengo aholkua." #~ msgid "Open Documentation in web browser." #~ msgstr "Ireki Dokumentazioa web nabigatzailean." #~ msgid "Jump to Layer" #~ msgstr "Geruzara jauzi egin" #~ msgid "Please enter the layer number" #~ msgstr "Mesedez, sartu geruza zenbakia" #~ msgid "?" #~ msgstr "?" #~ msgid "/" #~ msgstr "/" #~ msgid "AMS not connected" #~ msgstr "AMS-a ez dago konektatuta" #~ msgid "Ext Spool" #~ msgstr "Kanpoko bobina" #~ msgid "Guide" #~ msgstr "Gida" #~ msgid "Calibrating AMS..." #~ msgstr "AMS-a kalibratzen..." #~ msgid "A problem occurred during calibration. Click to view the solution." #~ msgstr "Arazo bat gertatu da kalibrazioan. Egin klik soluzioa ikusteko." #~ msgid "Calibrate again" #~ msgstr "Kalibratu berriro" #~ msgid "Cancel calibration" #~ msgstr "Bertan behera utzi kalibrazioa" #~ msgid "Pull back current filament" #~ msgstr "Atera uneko filamentua" #~ msgid "Feed Filament" #~ msgstr "Filamentua kargatu" #~ msgid "Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically load or unload filaments." #~ msgstr "Aukeratu AMSren arteka bat eta sakatu \"Kargatu\" edo \"Deskargatu\" botoia filamentuak automatikoki kargatzeko edo deskargatzeko." #~ msgid "Arranging is done but there are unpacked items. Reduce spacing and try again." #~ msgstr "Antolaketa egin da, baina badira paketatu gabeko elementuak. Murriztu tartea eta saiatu berriro." #~ msgid "Abnormal print file data. Please slice again." #~ msgstr "Inprimatze-fitxategiaren datu anormalak. Mesedez, xerratu berriro." #~ msgid "Print file not found. Please slice again." #~ msgstr "Ez da inprimatze-fitxategia aurkitu. Mesedez, xerratu berriro." #~ msgid "Check the current status of the bambu server by clicking on the link above." #~ msgstr "Egiaztatu Bambu zerbitzariaren uneko egoera goiko estekan klik eginez." #~ msgid "Print file not found, please slice it again and send it for printing." #~ msgstr "Inprimatze-fitxategia ez da aurkitu, xerratu berriro eta bidali inprimatzera." #~ msgid "Failed to upload print file to FTP. Please check the network status and try again." #~ msgstr "Huts egin du inprimatze-fitxategia FTPra igotzean. Mesedez, egiaztatu sarearen egoera eta saiatu berriro." #~ msgid "An SD card needs to be inserted before printing via LAN." #~ msgstr "SD txartel bat sartu behar da LAN bidez inprimatu aurretik." #~ msgid "An SD card needs to be inserted before sending to printer." #~ msgstr "SD txartel bat sartu behar da inprimagailura bidali aurretik." #~ msgid "The SLA archive doesn't contain any presets. Please activate some SLA printer preset first before importing that SLA archive." #~ msgstr "SLAren artxiboak ez du inolako aurrezarpenik. Mesedez, aktibatu SLA inprimagailuaren aurrezarpenen bat SLA artxibo hori inportatu aurretik." #~ msgid "You cannot load SLA project with a multi-part object on the bed" #~ msgstr "Ezin da ohean pieza anitzeko objektu bat duen SLA proiektu bat kargatu" #~ msgid "Portions copyright" #~ msgstr "Copyright zatiak" #~ msgid "OrcaSlicer is based on BambuStudio, PrusaSlicer, and SuperSlicer." #~ msgstr "OrcaSlicer softwarea BambuStudio, PrusaSlicer eta SuperSlicer-en oinarritua dago." #~ msgid "BambuStudio is originally based on PrusaSlicer by PrusaResearch." #~ msgstr "BambuStudio, jatorriz, PrusaResearch-en PrusaSlicer-en oinarritzen da." #~ msgid "PrusaSlicer is originally based on Slic3r by Alessandro Ranellucci." #~ msgstr "PrusaSlicer, jatorriz, Alessandro Ranellucciren Slic3r-en oinarrituta dago." #~ msgid "Slic3r was created by Alessandro Ranellucci with the help of many other contributors." #~ msgstr "Slic3r Alessandro Ranelluccik sortu zuen, beste kolaboratzaile askoren laguntzarekin." #~ msgid "Bed Type" #~ msgstr "Ohean mota" #~ msgid "Start calibration" #~ msgstr "Hasi kalibrazioa" #~ msgid "Last Step" #~ msgstr "Azken urratsa" #~ msgid "Dynamic flow Calibration" #~ msgstr "Fluxuaren kalibrazio dinamikoa" #~ msgid "Note: Only the AMS slots loaded with the same material type can be selected." #~ msgstr "Oharra: Material mota berdinarekin kargatutako AMS artekak bakarrik aukeratu daitezke." #~ msgid "Print with filaments in the AMS" #~ msgstr "AMSko filamentuekin inprimatu" #~ msgid "Print with the filament mounted on the back of chassis" #~ msgstr "Inprimatu txasisaren atzeko aldean muntatutako filamentuarekin" #~ msgid "Please change the desiccant when it is too wet. The indicator may not represent accurately in following cases: when the lid is open or the desiccant pack is changed. It take hours to absorb the moisture, and low temperatures also slow down the process." #~ msgstr "Mesedez, aldatu lehorgarria oso bustita dagoenean. Baliteke adierazleak ez irudikatzea zehaztasunez kasu hauetan: tapa irekita dagoenean edo pakete lehorgarria aldatzen denean. Hezetasuna xurgatzeko orduak behar dira, eta tenperatura baxuek ere prozesua moteltzen dute." #~ msgid "Print using materials mounted on the back of the case" #~ msgstr "Inprimatu estalkiaren atzealdean muntatutako materialak erabiliz" #~ msgid "Print with filaments in AMS" #~ msgstr "AMSko filamentuekin inprimatu" #~ msgid "Print with filaments mounted on the back of the chassis" #~ msgstr "Inprimatu txasisaren atzeko aldean muntatutako filamentuarekin" #~ msgid "AMS filament backup is not enabled, please enable it in the AMS settings." #~ msgstr "AMSko filamentuen ordezkapen automatikoa ez dago aktibatuta. Mesedez, aktibatu AMS-aren ezarpenetan." #~ msgid "" #~ "If there are two identical filaments in AMS, AMS filament backup will be enabled.\n" #~ "(Currently supporting automatic supply of consumables with the same brand, material type, and color)" #~ msgstr "" #~ "AMSan bi filamentu berdin-berdinak badaude, AMSko filamentuen ordezkapen automatikoa gaituko da.\n" #~ "(Gaur egun, marka, material-mota eta kolore bereko kontsumigarrien hornidura automatikoa onartzen du)" #~ msgid "The AMS will automatically read the filament information when inserting a new Bambu Lab filament. This takes about 20 seconds." #~ msgstr "AMSak automatikoki irakurriko du filamentuaren informazioa Bambu Lab-en filamentu berri bat sartzean. Honek 20 segundo inguru behar ditu." #~ msgid "Power on update" #~ msgstr "Eguneraketa piztean" #~ msgid "The AMS will automatically read the information of inserted filament on start-up. It will take about 1 minute. The reading process will roll the filament spools." #~ msgstr "AMSak automatikoki irakurriko du abiaraztean txertatutako filamentuaren informazioa. Minutu bat inguru iraungo du. Irakurketa prozesuak filamentuaren bobinak mugituko ditu." #~ msgid "The AMS will estimate Bambu filament's remaining capacity after the filament info is updated. During printing, remaining capacity will be updated automatically." #~ msgstr "AMS-ak geratzen den Bambu filamentuaren kapazitatea estimatuko du filamentuaren informazioa eguneratu ondoren. Inprimatu bitartean, geratzen den edukiera automatikoki eguneratuko da." #~ msgid "Failed to download the plug-in. Please check your firewall settings and vpn software, check and retry." #~ msgstr "Huts egin du plugina deskargatzean. Mesedez, egiaztatu zure firewall ezarpenak eta vpn softwarea eta saiatu berriro." #~ msgid "Failed to install the plug-in. Please check whether it is blocked or deleted by anti-virus software." #~ msgstr "Huts egin du plugina instalatzean. Mesedez, egiaztatu antibirusaren softwareak blokeatuta edo ezabatuta dagoen." #~ msgid "click here to see more info" #~ msgstr "egin klik hemen informazio gehiago ikusteko" #~ msgid "A error occurred. Maybe memory of system is not enough or it's a bug of the program" #~ msgstr "Errore bat gertatu da. Agian sistemaren memoria ez da nahikoa edo programaren akats bat da" #~ msgid "Please save project and restart the program." #~ msgstr "Mesedez, gorde proiektua eta berrabiarazi programa." #~ msgid "Processing G-code from Previous file..." #~ msgstr "G-codea prozesatzen aurreko fitxategitik..." #~ msgid "Unknown error when exporting G-code." #~ msgstr "Errore ezezaguna G-codea esportatzean." #~ msgid "Copying of the temporary G-code to the output G-code failed" #~ msgstr "Aldi baterako G-codea irteerako G-codean kopiatzeak huts egin du" #~ msgid "syncing" #~ msgstr "sinkronizatzen" #~ msgid "Bed Leveling" #~ msgstr "Ohearen nibelazioa" #~ msgid "minute each batch. (It depends on how long it takes to complete the heating.)" #~ msgstr "minutu txanda bakoitzak. (Berotzeko behar den denboraren arabera)." #~ msgid "The name is not allowed to be empty." #~ msgstr "Izena ezin da hutsik utzi." #~ msgid "The name is not allowed to start with space character." #~ msgstr "Izena ezin da hutsune batekin hasi." #~ msgid "The name is not allowed to end with space character." #~ msgstr "Izena ezin da hutsune batekin amaitu." #~ msgid "Error! Invalid model" #~ msgstr "Errorea! Modeloa ez da baliozkoa" #~ msgid "The selected file contains several disjoint areas. This is not supported." #~ msgstr "Hautatutako fitxategiak hainbat eremu disjuntu ditu. Hori ez da bateragarria." #~ msgid "The recommended minimum temperature is less than 190°C or the recommended maximum temperature is greater than 300°C.\n" #~ msgstr "Gomendatutako gutxieneko tenperatura 190 ºC baino txikiagoa da edo gomendatutako gehieneko tenperatura 300 ºC baino handiagoa.\n" #~ msgid "" #~ "Nozzle may be blocked when the temperature is out of recommended range.\n" #~ "Please make sure whether to use the temperature to print.\n" #~ "\n" #~ msgstr "" #~ "Pita blokeatu egin daiteke tenperatura gomendatutako tartetik kanpo dagoenean.\n" #~ "Mesedez, ziurtatu inprimatzeko tenperatura hau erabili behar den ala ez.\n" #~ msgid "" #~ "Too small max volumetric speed.\n" #~ "Reset to 0.5" #~ msgstr "" #~ "Abiadura bolumetriko maximo txikiegia.\n" #~ "Berrezarri 0,5era" #, c-format, boost-format #~ msgid "Current chamber temperature is higher than the material's safe temperature, this may result in material softening and clogging. The maximum safe temperature for the material is %d" #~ msgstr "Uneko ganberako tenperatura materialaren tenperatura segurua baino handiagoa da, horrek materiala biguntzea ekar dezake eta buxaketak eragin ditzake. Materialaren gehienezko tenperatura segurua %d da" #~ msgid "" #~ "Too small layer height.\n" #~ "Reset to 0.2" #~ msgstr "" #~ "Geruza-altuera txikiegia.\n" #~ "Berrezarri 0,2ra" #~ msgid "" #~ "Too small ironing spacing.\n" #~ "Reset to 0.1" #~ msgstr "" #~ "Lisatzeko tarte txikiegia.\n" #~ "Berrezarri 0,1era" #~ msgid "" #~ "This setting is only used for model size tunning with small value in some cases.\n" #~ "For example, when model size has small error and hard to be assembled.\n" #~ "For large size tuning, please use model scale function.\n" #~ "\n" #~ "The value will be reset to 0." #~ msgstr "" #~ "Doikuntza hau kasu batzuetan balio txikia duen modeloaren tamaina doitzeko baino ez da erabiltzen\n" #~ "Adibidez, modeloaren tamainak errore txikia duenean eta muntatzen zaila denean.\n" #~ "Tamaina handiko doiketarako, erabili eredua eskalatzeko funtzioa.\n" #~ "\n" #~ "Balioa 0an berrezarriko da." #~ msgid "" #~ "Too large elephant foot compensation is unreasonable.\n" #~ "If really have serious elephant foot effect, please check other settings.\n" #~ "For example, whether bed temperature is too high.\n" #~ "\n" #~ "The value will be reset to 0." #~ msgstr "" #~ "Elefante-oinaren konpentsazio handiegia ez da arrazoizkoa.\n" #~ "Benetan elefante oin efektu larria badu, egiaztatu beste ezarpenak.\n" #~ "Adibidez, ohearen tenperatura altuegia ote den.\n" #~ "\n" #~ "Balioa 0an berrezarriko da." #~ msgid "Spiral mode only works when wall loops is 1, support is disabled, top shell layers is 0, sparse infill density is 0 and timelapse type is traditional." #~ msgstr "Modu espiralak kasu hauetan bakarrik funtzionatzen du: perimetroko begizta kopurua 1 denean, euskarriak desaktibatuta daudenean, estalkiaren goiko geruzak 0 direnean, dentsitate baxuko betegarriaren kantitatea 0 denean eta timelapse mota tradizionala denean." #~ msgid "" #~ "Change these settings automatically?\n" #~ "Yes - Change these settings and enable spiral mode automatically\n" #~ "No - Give up using spiral mode this time" #~ msgstr "" #~ "Ezarpen hauek automatikoki aldatu?\n" #~ "Bai - Aldatu doikuntza horiek eta aktibatu modu espirala automatikoki\n" #~ "Ez - Uko egin espiral modua erabiltzeari oraingoan" #~ msgid "Sweeping XY mech mode" #~ msgstr "Ekorketa XYn modu mekanikoan" #~ msgid "Paused due to filament runout" #~ msgstr "Pausa filamentua amaitu delako" #~ msgid "Heating hotend" #~ msgstr "Hotend-a berotzen" #~ msgid "Calibrating extrusion" #~ msgstr "Estrusioa kalibratzen" #~ msgid "Printing was paused by the user" #~ msgstr "Inprimaketa eten egin du erabiltzaileak" #~ msgid "Pause of front cover falling" #~ msgstr "Aurrealdeko estalkia erori delako pausatuta" #~ msgid "Calibrating extrusion flow" #~ msgstr "Estrusio-fluxua kalibratzen" #~ msgid "Paused due to nozzle temperature malfunction" #~ msgstr "Pausatuta pitaren tenperatura gaizki dabilelako" #~ msgid "Paused due to heat bed temperature malfunction" #~ msgstr "Pausatuta, ohe beroaren tenperatura gaizki dabilelako" #~ msgid "Skip step pause" #~ msgstr "Pausa motorraren pasoa saltatu duelako" #~ msgid "Motor noise calibration" #~ msgstr "Motorraren zarataren kalibrazioa" #~ msgid "Paused due to AMS lost" #~ msgstr "Pausatu egin da AMS-a galdu delako" #~ msgid "Paused due to low speed of the heat break fan" #~ msgstr "Pausatuta, beroa disipatzeko haizagailuaren abiadura txikia dela eta" #~ msgid "Paused due to chamber temperature control error" #~ msgstr "Pausatuta, ganberako tenperaturaren kontrolean errore bat gertatu delako" #~ msgid "Paused by the G-code inserted by user" #~ msgstr "Erabiltzaileak txertatutako G-codearen bidez pausatuta" #~ msgid "Nozzle filament covered detected pause" #~ msgstr "Pausatuta, pitan filamentuaren metaketa detektatu delako" #~ msgid "Cutter error pause" #~ msgstr "Pausatuta, ebakitzailearen erroreagatik" #~ msgid "First layer error pause" #~ msgstr "Pausatuta, lehenengo geruzan akatsa gertatu delako" #~ msgid "Nozzle clog pause" #~ msgstr "Pausatuta, pitaren buxaduraren ondorioz" #~ msgid "Fatal" #~ msgstr "Oso larria" #~ msgid "Serious" #~ msgstr "Serioa" #~ msgid "Common" #~ msgstr "Ohikoa" #~ msgid "The current chamber temperature or the target chamber temperature exceeds 45℃. In order to avoid extruder clogging, low temperature filament (PLA/PETG/TPU) is not allowed to be loaded." #~ msgstr "Uneko ganberako tenperatura edo ganberako tenperatura helburua 45 ℃ baino handiagoa da. Estrusorea ez buxatzeko, tenperatura baxuko filamenturik (PLA/PETG/TPU) ezin da kargatu." #~ msgid "Low temperature filament (PLA/PETG/TPU) is loaded in the extruder. In order to avoid extruder clogging, it is not allowed to set the chamber temperature above 45℃." #~ msgstr "Estrusorean tenperatura baxuko filamentua (PLA/PETG/TPU) dago kargatuta. Buxadurak saihesteko, ezin da ganberako tenperatura 45 ℃ baino handiagoa ezarri." #~ msgid "Bambu PET-CF/PA6-CF is not supported by AMS." #~ msgstr "AMSak ez du Bambu PET-CF/PA6-CF onartzen." #, c-format, boost-format #~ msgid "%s can't be a percentage" #~ msgstr "%s -k ezin du ehuneko bat izan" #~ msgid "Loading G-code" #~ msgstr "G-codea kargatzen" #~ msgid "Generating geometry vertex data" #~ msgstr "Geometriaren erpinei buruzko datuak sortzen" #~ msgid "Generating geometry index data" #~ msgstr "Indize geometrikoen datuak sortzen" #~ msgid "Total Estimation" #~ msgstr "Zenbatespena, guztira" #~ msgid "Color Scheme" #~ msgstr "Koloreen eskema" #~ msgid "Percent" #~ msgstr "Ehunekoa" #~ msgid "Layer Height (mm)" #~ msgstr "Geruza-altuera (mm)" #~ msgid "Line Width (mm)" #~ msgstr "Lerro-zabalera (mm)" #~ msgid "Fan Speed (%)" #~ msgstr "Haizagailuaren abiadura (%)" #~ msgid "Temperature (°C)" #~ msgstr "Tenperatura (°C)" #~ msgid "Filament Changes" #~ msgstr "Filamentu aldaketak" #~ msgid "travel" #~ msgstr "ibilbidea" #~ msgid "Print" #~ msgstr "Inprimatu" #~ msgid "Switch to silent mode" #~ msgstr "Aldatu modu isilera" #~ msgid "Switch to normal mode" #~ msgstr "Aldatu modu normalera" #~ msgid "Left mouse button:" #~ msgstr "Saguaren ezkerreko botoia:" #~ msgid "Right mouse button:" #~ msgstr "Saguaren eskuineko botoia:" #~ msgid "Shift + Left mouse button:" #~ msgstr "Shift + Saguaren ezkerreko botoia:" #~ msgid "Shift + Right mouse button:" #~ msgstr "Shift + Saguaren eskuineko botoia:" #~ msgid "Mouse wheel:" #~ msgstr "Saguaren gurpila:" #~ msgid "Mirror Object" #~ msgstr "Islatu objektua" #~ msgid "Tool Move" #~ msgstr "Mugitzeko Erreminta" #~ msgid "Move Object" #~ msgstr "Objektua mugitu" #~ msgid "Auto Orientation options" #~ msgstr "Automatikoki orientatzeko aukerak" #~ msgid "Assemble Control" #~ msgstr "Multzokatze-kontrola" #, boost-format #~ msgid "Conflicts of G-code paths have been found at layer %d, z = %.2lf mm. Please separate the conflicted objects farther (%s <-> %s)." #~ msgstr "G-codearen ibilbideetan gatazkak aurkitu dira %d geruzan, z = %.2lf mm. Mesedez, bereizi gehiago gatazkan dauden objektuak (%s <-> %s)." #~ msgid "A G-code path goes beyond the plate boundaries." #~ msgstr "G-code-ko ibilbide batek plakaren mugak gainditzen ditu." #~ msgid "" #~ "An object is laid over the plate boundaries or exceeds the height limit.\n" #~ "Please solve the problem by moving it totally on or off the plate, and confirming that the height is within the build volume." #~ msgstr "" #~ "Objektu bat plakaren mugen gainean jarrita dago edo altuera muga gainditzen du.\n" #~ "Mesedez, konpondu arazoa plakatik erabat kanpora edo barrura mugituz, eta altuera eraikuntza-bolumenaren barruan dagoela baieztatuz." #~ msgid "720p" #~ msgstr "720p" #~ msgid "1080p" #~ msgstr "1080p" #~ msgid "" #~ "You can find it in \"Settings > Network > Connection code\"\n" #~ "on the printer, as shown in the figure:" #~ msgstr "" #~ "Bide honetan aurki dezakezu: \"Konfigurazioa > Sarea > Konexio-kodea\"\n" #~ "inprimagailuan, irudian ikusten den bezala:" #~ msgid "Invalid input." #~ msgstr "Sarrera baliogabea." #~ msgid "Application is closing" #~ msgstr "Aplikazioa ixten ari da" #~ msgid "Show the list of the keyboard shortcuts" #~ msgstr "Erakutsi teklatuko lasterbideen zerrenda" #~ msgid "Check for Update" #~ msgstr "Egiaztatu eguneraketak" #~ msgid "Recent projects" #~ msgstr "Azken proiektuak" #~ msgid "Export 3mf file without using some 3mf-extensions" #~ msgstr "Esportatu 3mf fitxategia 3mf-luzapen batzuk erabili gabe" #~ msgid "Delete all" #~ msgstr "Ezabatu guztia" #~ msgid "Clone selected" #~ msgstr "Klonatu hautaketa" #~ msgid "Select all" #~ msgstr "Hautatu dena" #~ msgid "Deselect all" #~ msgstr "Desautatu dena" #~ msgid "Pass 1" #~ msgstr "1 pausoa" #~ msgid "Flow rate test - Pass 1" #~ msgstr "Fluxuaren Testa - 1. pausoa" #~ msgid "Pass 2" #~ msgstr "2 pausoa" #~ msgid "Flow rate test - Pass 2" #~ msgstr "Fluxuaren Testa - 2. pausoa" #~ msgid "Orca YOLO flowrate calibration, 0.01 step" #~ msgstr "Orcaren YOLO fluxua-kalibrazioa: 0,01eko gehikuntza" #~ msgid "YOLO (perfectionist version)" #~ msgstr "YOLO (bertsio perfekzionista)" #~ msgid "Orca YOLO flowrate calibration, 0.005 step" #~ msgstr "Orcaren YOLO fluxua-kalibrazioa: 0,005eko gehikuntza" #~ msgid "Retraction test" #~ msgstr "Atzera-egite testa" #~ msgid "More..." #~ msgstr "Gehiago..." #~ msgid "Tutorial" #~ msgstr "Tutoriala" #~ msgid "Calibration help" #~ msgstr "Kalibrazioari buruzko laguntza" #~ msgid "More calibrations" #~ msgstr "Kalibrazio gehiago" #, c-format, boost-format #~ msgid "A file exists with the same name: %s, do you want to overwrite it?" #~ msgstr "Lehendik badago %s izena bera duen fitxategi bat. Ordeztu nahi duzu?" #, c-format, boost-format #~ msgid "A config exists with the same name: %s, do you want to overwrite it?" #~ msgstr "Izen bera duen konfigurazio bat dago: %s. Ordeztu nahi duzu?" #~ msgid "Export result" #~ msgstr "Esportatu emaitza" #~ msgid "Filament Settings" #~ msgstr "Filamentuaren ezarpenak" #~ msgid "" #~ "Do you want to synchronize your personal data from Bambu Cloud?\n" #~ "It contains the following information:\n" #~ "1. The Process presets\n" #~ "2. The Filament presets\n" #~ "3. The Printer presets" #~ msgstr "" #~ "Zure datu pertsonalak Bambu Cloudetik sinkronizatu nahi dituzu?\n" #~ "Informazio hau dauka:\n" #~ "1. Prozesuaren aurrezarpenak\n" #~ "2. Filamentuaren aurrezarpenak\n" #~ "3. Inprimagailuaren aurrezarpenak" #~ msgid "The player is not loaded, please click \"play\" button to retry." #~ msgstr "Erreproduzitzailea ez dago kargatuta; sakatu \"erreproduzitu\" botoia berriro saiatzeko." #~ msgid "Please enter the IP of printer to connect." #~ msgstr "Sartu konektatu nahi duzun inprimagailuaren IPa." #~ msgid "Switch to 3mf model files." #~ msgstr "Aldatu 3mf modelo-fitxategietara." #~ msgid "Browsing file in SD card is not supported in current firmware. Please update the printer firmware." #~ msgstr "SD txarteleko fitxategiak arakatzea ez dago onartuta uneko firmwarean. Eguneratu inprimagailuaren firmwarea." #~ msgid "" #~ "Please check if the SD card is inserted into the printer.\n" #~ "If it still cannot be read, you can try formatting the SD card." #~ msgstr "" #~ "Egiaztatu SD txartela inprimagailuan sartuta dagoela.\n" #~ "Oraindik ezin bada irakurri, SD txartela formateatzen saia zaitezke." #~ msgid "Browsing file in SD card is not supported in LAN Only Mode." #~ msgstr "SD txarteleko fitxategiak arakatzea ez dago onartuta LAN soilik moduan." #~ msgid "Storage unavailable, insert SD card." #~ msgstr "Biltegiratzea ez dago erabilgarri; sartu SD txartela." #~ msgid "Printing Progress" #~ msgstr "Inprimaketa martxan" #~ msgid "0" #~ msgstr "0" #~ msgid "" #~ "You have completed printing the mall model, \n" #~ "but the synchronization of rating information has failed." #~ msgstr "" #~ "Mall modeloa inprimatzen amaitu duzu, \n" #~ "baina balorazio-informazioaren sinkronizazioak huts egin du." #~ msgid "SD Card" #~ msgstr "SD txartela" #~ msgid "100%" #~ msgstr "100%" #~ msgid "Cham" #~ msgstr "Ganb." #~ msgid "No SD Card" #~ msgstr "Ez dago SD txartelik" #~ msgid "SD Card Abnormal" #~ msgstr "SD txartelaren anomalia" #, c-format, boost-format #~ msgid "In Cloud Slicing Queue, there are %s tasks ahead." #~ msgstr "Hodeiko xerratze-ilaran, %s zeregin daude aurretik." #~ msgid "Please heat the nozzle to above 170°C before loading or unloading filament." #~ msgstr "Berotu pita 170 °C-tik gora filamentua kargatu edo deskargatu aurretik." #~ msgid "Still unload" #~ msgstr "Oraindik deskargatu gabe" #~ msgid "Still load" #~ msgstr "Oraindik kargatu gabe" #~ msgid "Please select an AMS slot before calibration." #~ msgstr "Hautatu AMS arteka bat kalibratu aurretik." #~ msgid "Cannot read filament info: the filament is loaded to the tool head,please unload the filament and try again." #~ msgstr "Ezin da filamentuen informazioa irakurri: filamentua tresna-buruan kargatuta dago; deskargatu filamentua eta saiatu berriro." #~ msgid "Can't start this without SD card." #~ msgstr "Ezin da hau abiarazi SD txartelik gabe." #~ msgid "obtaining instance_id failed\n" #~ msgstr "instance_id eskuratzeak huts egin du\n" #~ msgid "Newer 3mf version" #~ msgstr "3mf bertsio berriagoa" #~ msgid "The 3mf file version is in Beta and it is newer than the current OrcaSlicer version." #~ msgstr "3mf fitxategiaren bertsioa Beta da eta OrcaSlicerren uneko bertsioa baino berriagoa da." #~ msgid "The 3mf file version is newer than the current Orca Slicer version." #~ msgstr "3mf fitxategiaren bertsioa OrcaSlicerren uneko bertsioa baino berriagoa da." #~ msgid "Update your Orca Slicer could enable all functionality in the 3mf file." #~ msgstr "OrcaSlicer eguneratuz gero, 3mf fitxategiko funtzionalitate guztiak gaitu ahal izango dira." #~ msgid "Configuration can update now." #~ msgstr "Konfigurazioa orain egunera daiteke." #~ msgid "Detail." #~ msgstr "Xehetasuna." #~ msgid "Exporting." #~ msgstr "Esportatzen." #~ msgid "Software has New version." #~ msgstr "Softwareak bertsio berria du." #~ msgid "Goto download page." #~ msgstr "Joan deskarga orrira." #~ msgid "Support painting" #~ msgstr "Euskarriak margotu" #~ msgid "Color painting" #~ msgstr "Koloreak margotu" #~ msgid "The application cannot run normally because OpenGL version is lower than 2.0.\n" #~ msgstr "Aplikazioa ezin da normal exekutatu OpenGL bertsioa 2.0 baino baxuagoa delako.\n" #~ msgid "Sensitivity of pausing is" #~ msgstr "Pausatzearen sentikortasuna da" #~ msgid "The localization tag of build plate is detected, and printing is paused if the tag is not in predefined range." #~ msgstr "Eraikitze-plakaren lokalizazio-etiketa detektatu da, eta inprimatzea pausatzen da etiketa aurrez definitutako tartean ez badago." #~ msgid "Auto-recovery from step loss" #~ msgstr "Urrats-galeratik automatikoki berreskuratzea" #~ msgid "Filament Tangle Detect" #~ msgstr "Filamentu-korapiloen detekzioa" #~ msgid "Nozzle Type" #~ msgstr "Pita mota" #, c-format, boost-format #~ msgid "%.1f" #~ msgstr "%.1f" #~ msgid "Advance" #~ msgstr "Aurreratua" #~ msgid "No AMS filaments. Please select a printer in 'Device' page to load AMS info." #~ msgstr "Ez dago AMS filamenturik. Hautatu inprimagailu bat 'Gailua' orrian AMS informazioa kargatzeko." #~ msgid "Sync filaments with AMS will drop all current selected filament presets and colors. Do you want to continue?" #~ msgstr "Filamentuak AMSarekin sinkronizatzeak hautatutako uneko filamentuen aurrezarpen eta kolore guztiak baztertuko ditu. Jarraitu nahi duzu?" #~ msgid "Already did a synchronization, do you want to sync only changes or resync all?" #~ msgstr "Sinkronizazio bat egin da dagoeneko; aldaketak bakarrik sinkronizatu nahi dituzu edo dena berriro sinkronizatu?" #~ msgid "Sync" #~ msgstr "Sinkronizatu" #~ msgid "Resync" #~ msgstr "Berriro sinkronizatu" #~ msgid "There are some unknown filaments mapped to generic preset. Please update Orca Slicer or restart Orca Slicer to check if there is an update to system presets." #~ msgstr "Filamentu ezezagun batzuk aurrezarpen generikora esleitu dira. Eguneratu Orca Slicer edo berrabiarazi Orca Slicer sistemako aurrezarpenen eguneratzerik dagoen egiaztatzeko." #, c-format, boost-format #~ msgid "Ejecting of device %s(%s) has failed." #~ msgstr "%s(%s) gailua egozteak huts egin du." #~ msgid "Previous unsaved project detected, do you want to restore it?" #~ msgstr "Gorde gabeko aurreko proiektu bat detektatu da; leheneratu nahi duzu?" #~ msgid "The current hot bed temperature is relatively high. The nozzle may be clogged when printing this filament in a closed enclosure. Please open the front door and/or remove the upper glass." #~ msgstr "Uneko ohe beroaren tenperatura nahiko altua da. Pita buxatu daiteke filamentua itxitako ganbera batean inprimatzean. Ireki aurreko atea eta/edo kendu goiko beira." #~ msgid "The nozzle hardness required by the filament is higher than the default nozzle hardness of the printer. Please replace the hardened nozzle or filament, otherwise, the nozzle will be attrited or damaged." #~ msgstr "Filamentuak eskatzen duen pitaren gogortasuna inprimagailuaren pitaren gogortasun lehenetsia baino handiagoa da. Ordeztu pita gogortuarekin edo filamentua; bestela, pita higatu edo kaltetu daiteke." #~ msgid "The 3mf is not supported by OrcaSlicer, load geometry data only." #~ msgstr "3mf-a ez du OrcaSlicerrek onartzen; kargatu geometriaren datuak bakarrik." #~ msgid "Load 3mf" #~ msgstr "Kargatu 3mf" #, c-format, boost-format #~ msgid "The 3mf's version %s is newer than %s's version %s, found following unrecognized keys:" #~ msgstr "3mf-aren %s bertsioa %s-ren %s bertsioa baino berriagoa da; ezagutzen ez diren gako hauek aurkitu dira:" #~ msgid "You'd better upgrade your software.\n" #~ msgstr "Softwarea eguneratzea komeni zaizu.\n" #, c-format, boost-format #~ msgid "The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your software." #~ msgstr "3mf-aren %s bertsioa %s-ren %s bertsioa baino berriagoa da; softwarea eguneratzea gomendatzen da." #~ msgid "Invalid values found in the 3mf:" #~ msgstr "Balio baliogabeak aurkitu dira 3mf fitxategian:" #~ msgid "Please correct them in the param tabs" #~ msgstr "Zuzendu parametroen fitxetan" #~ msgid "The 3mf has the following modified G-code in filament or printer presets:" #~ msgstr "3mf-ak aldatutako G-code hau dauka filamentuen edo inprimagailuaren aurrezarpenetan:" #~ msgid "The 3mf has the following customized filament or printer presets:" #~ msgstr "3mf-ak pertsonalizatutako filamentuen edo inprimagailuaren aurrezarpen hauek dauzka:" #~ msgid "Name of components inside step file is not UTF8 format!" #~ msgstr "Step fitxategiko osagaien izena ez dago UTF8 formatuan!" #~ msgid "The name may show garbage characters!" #~ msgstr "Izenak karaktere ulergaitzak erakuts ditzake!" #, c-format, boost-format #~ msgid "" #~ "The object from file %s is too small, and maybe in meters or inches.\n" #~ " Do you want to scale to millimeters?" #~ msgstr "" #~ "%s fitxategiko objektua txikiegia da, eta baliteke metroetan edo hazbetetan egotea.\n" #~ " Milimetrotara eskalatu nahi duzu?" #~ msgid "" #~ "This file contains several objects positioned at multiple heights.\n" #~ "Instead of considering them as multiple objects, should \n" #~ "the file be loaded as a single object having multiple parts?" #~ msgstr "" #~ "Fitxategi honek hainbat altueratan kokatutako hainbat objektu ditu.\n" #~ "Objektu anitz gisa hartu beharrean, \n" #~ "fitxategia pieza anitzeko objektu bakar gisa kargatu nahi duzu?" #~ msgid "Object with multiple parts was detected" #~ msgstr "Pieza anitzeko objektu bat detektatu da" #~ msgid "Save file as:" #~ msgstr "Gorde fitxategia honela:" #, c-format, boost-format #~ msgid "" #~ "The file %s already exists\n" #~ "Do you want to replace it?" #~ msgstr "" #~ "%s fitxategia badago lehendik\n" #~ "Ordeztu nahi duzu?" #~ msgid "" #~ "You try to delete an object which is a part of a cut object.\n" #~ "This action will break a cut correspondence.\n" #~ "After that model consistency can't be guaranteed." #~ msgstr "" #~ "Moztutako objektu baten parte den objektu bat ezabatzen saiatzen ari zara.\n" #~ "Ekintza honek mozketaren lotura hautsiko du.\n" #~ "Ondoren, modeloaren koherentzia ezin da bermatu." #~ msgid "Error during replace" #~ msgstr "Errorea ordeztean" #~ msgid "File for the replace wasn't selected" #~ msgstr "Ez da ordezteko fitxategirik hautatu" #~ msgid "Network Plug-in is not detected. Network related features are unavailable." #~ msgstr "Sareko plugina ez da detektatu. Sarearekin lotutako funtzioak ez daude erabilgarri." #~ msgid "You can keep the modified presets to the new project or discard them" #~ msgstr "Aldatutako aurrezarpenak proiektu berrian gorde edo baztertu ditzakezu" #~ msgid "" #~ "Failed to save the project.\n" #~ "Please check whether the folder exists online or if other programs open the project file." #~ msgstr "" #~ "Huts egin du proiektua gordetzean.\n" #~ "Egiaztatu karpeta linean dagoen edo beste programek proiektu-fitxategia irekita duten." #~ msgid "prepare 3mf file..." #~ msgstr "3mf fitxategia prestatzen..." #~ msgid "Download failed, unknown file format." #~ msgstr "Deskargak huts egin du; fitxategi-formatu ezezaguna." #~ msgid "downloading project..." #~ msgstr "proiektua deskargatzen..." #~ msgid "Download failed, File size exception." #~ msgstr "Deskargak huts egin du; fitxategi-tamainaren salbuespena." #~ msgid "does not contain valid G-code." #~ msgstr "ez du baliozko G-coderik." #~ msgid "Error occurs while loading G-code file" #~ msgstr "Errorea gertatu da G-code fitxategia kargatzean" #~ msgid "This option can be changed later in preferences, under 'Load Behaviour'." #~ msgstr "Aukera hau geroago alda daiteke hobespenetan, 'Kargatze-portaera' atalean." #~ msgid "Only one G-code file can be opened at the same time." #~ msgstr "G-code fitxategi bakarra ireki daiteke aldi berean." #~ msgid "G-code files cannot be loaded with models together!" #~ msgstr "G-code fitxategiak ezin dira modeloekin batera kargatu!" #~ msgid "Cannot add models when in preview mode!" #~ msgstr "Ezin dira modeloak gehitu aurreikuspen-moduan!" #~ msgid "The current project has unsaved changes, save it before continue?" #~ msgstr "Uneko proiektuak gorde gabeko aldaketak ditu; gorde jarraitu aurretik?" #~ msgid "" #~ "Are you sure you want to store original SVGs with their local paths into the 3MF file?\n" #~ "If you hit 'NO', all SVGs in the project will not be editable any more." #~ msgstr "" #~ "Ziur zaude jatorrizko SVGak beren bide lokalekin 3MF fitxategian gorde nahi dituzula?\n" #~ "'EZ' sakatzen baduzu, proiektuko SVG guztiak ezingo dira gehiago editatu." #~ msgid "Private protection" #~ msgstr "Pribatutasun-babesa" #~ msgid "" #~ "Print By Object: \n" #~ "Suggest to use auto-arrange to avoid collisions when printing." #~ msgstr "" #~ "Objektuka inprimatu: \n" #~ "Auto-antolatzea erabiltzea gomendatzen da talkak saihesteko." #~ msgid "Invalid number" #~ msgstr "Zenbaki baliogabea" #~ msgid "\"Fix Model\" feature is currently only on Windows. Please repair the model on Orca Slicer(windows) or CAD softwares." #~ msgstr "\"Konpondu modeloa\" funtzioa Windowsen bakarrik dago une honetan. Konpondu modeloa Orca Slicer-en (Windows) edo CAD softwareetan." #, c-format, boost-format #~ msgid "Plate %d: %s is not suggested to be used to print filament %s (%s). If you still want to do this print job, please set this filament's bed temperature to non-zero." #~ msgstr "%d plaka: ez da gomendatzen %s erabiltzea %s (%s) filamentua inprimatzeko. Hala ere inprimatze-lan hau egin nahi baduzu, ezarri filamentuarentzako ohearen tenperatura zero ez den balio batera." #~ msgid "Switching the language requires application restart.\n" #~ msgstr "Hizkuntza aldatzeko aplikazioa berrabiarazi behar da.\n" #~ msgid "Changing the region will log out your account.\n" #~ msgstr "Eskualdea aldatzeak zure kontuko saioa amaituko du.\n" #~ msgid "General Settings" #~ msgstr "Ezarpen orokorrak" #~ msgid "Login Region" #~ msgstr "Saio-hasierako eskualdea" #~ msgid "This stops the transmission of data to Bambu's cloud services. Users who don't use BBL machines or use LAN mode only can safely turn on this function." #~ msgstr "Honek Bambu-ren hodeiko zerbitzuetara datuak bidaltzea gelditzen du. BBL makinak erabiltzen ez dituzten edo LAN modua soilik erabiltzen duten erabiltzaileek segurtasunez aktiba dezakete funtzio hau." #~ msgid "Enable network plugin" #~ msgstr "Gaitu sareko plug-ina" #~ msgid "Default Page" #~ msgstr "Orrialde lehenetsia" #~ msgid "Swap pan and rotate mouse buttons" #~ msgstr "Trukatu desplazatzeko eta biratzeko sagu-botoiak" #~ msgid "If enabled, swaps the left and right mouse buttons pan and rotate functions." #~ msgstr "Gaituta badago, ezkerreko eta eskuineko sagu-botoien desplazatze- eta biratze-funtzioak trukatzen ditu." #~ msgid "Show \"Tip of the day\" notification after start" #~ msgstr "Erakutsi \"Eguneko aholkua\" jakinarazpena abiarazi ondoren" #~ msgid "If enabled, useful hints are displayed at startup." #~ msgstr "Gaituta badago, aholku erabilgarriak bistaratzen dira abiaraztean." #~ msgid "Flushing volumes: Auto-calculate every time the color changed." #~ msgstr "Purgatze-bolumenak: automatikoki kalkulatu kolorea aldatzen den bakoitzean." #~ msgid "If enabled, auto-calculate every time the color changed." #~ msgstr "Gaituta badago, automatikoki kalkulatzen du kolorea aldatzen den bakoitzean." #~ msgid "Flushing volumes: Auto-calculate every time when the filament is changed." #~ msgstr "Purgatze-bolumenak: automatikoki kalkulatu filamentua aldatzen den bakoitzean." #~ msgid "If enabled, auto-calculate every time when filament is changed" #~ msgstr "Gaituta badago, automatikoki kalkulatzen du filamentua aldatzen den bakoitzean" #~ msgid "Multi-device Management (Take effect after restarting Orca Slicer)." #~ msgstr "Gailu anitzen kudeaketa (Orca Slicer berrabiarazi ondoren izango du eragina)." #~ msgid "Auto arrange plate after object cloning" #~ msgstr "Antolatu plaka automatikoki objektua klonatu ondoren" #~ msgid "Network" #~ msgstr "Sarea" #~ msgid "User Sync" #~ msgstr "Erabiltzailearen sinkronizazioa" #~ msgid "Update built-in Presets automatically." #~ msgstr "Eguneratu automatikoki aurrezarpen integratuak." #~ msgid "System Sync" #~ msgstr "Sistemaren sinkronizazioa" #~ msgid "Associate .3mf files to OrcaSlicer" #~ msgstr "Esleitu .3mf fitxategiak OrcaSlicerri" #~ msgid "If enabled, sets OrcaSlicer as default application to open .3mf files" #~ msgstr "Gaituta badago, OrcaSlicer ezartzen du .3mf fitxategiak irekitzeko aplikazio lehenetsi gisa" #~ msgid "Associate .stl files to OrcaSlicer" #~ msgstr "Esleitu .stl fitxategiak OrcaSlicerri" #~ msgid "If enabled, sets OrcaSlicer as default application to open .stl files" #~ msgstr "Gaituta badago, OrcaSlicer ezartzen du .stl fitxategiak irekitzeko aplikazio lehenetsi gisa" #~ msgid "Associate .step/.stp files to OrcaSlicer" #~ msgstr "Elkartu .step/.stp fitxategiak OrcaSlicerrekin" #~ msgid "If enabled, sets OrcaSlicer as default application to open .step files" #~ msgstr "Gaituta badago, OrcaSlicer ezartzen du .step fitxategiak irekitzeko aplikazio lehenetsi gisa" #~ msgid "Associate URLs to OrcaSlicer" #~ msgstr "Esleitu URLak OrcaSlicerri" #~ msgid "Load Behaviour" #~ msgstr "Kargatze-portaera" #~ msgid "Should printer/filament/process settings be loaded when opening a .3mf?" #~ msgstr ".3mf irekitzean inprimagailu/filamentu/prozesu ezarpenak kargatu behar dira?" #~ msgid "Maximum recent projects" #~ msgstr "Azken proiektuen gehienekoa" #~ msgid "Maximum count of recent projects" #~ msgstr "Azken proiektuen gehieneko kopurua" #~ msgid "No warnings when loading 3MF with modified G-code" #~ msgstr "Abisurik ez aldatutako G-codea duen 3MF kargatzean" #~ msgid "Auto-Backup" #~ msgstr "Babeskopia automatikoa" #~ msgid "Backup your project periodically for restoring from the occasional crash." #~ msgstr "Egin proiektuaren segurtasun-kopia aldizka, ustekabeko hutsegite baten ondoren leheneratzeko." #~ msgid "every" #~ msgstr "bakoitza" #~ msgid "Downloads" #~ msgstr "Deskargak" #~ msgid "Dark Mode" #~ msgstr "Modu iluna" #~ msgid "Enable Dark mode" #~ msgstr "Gaitu modu iluna" #~ msgid "Develop mode" #~ msgstr "Garatzaile modua" #~ msgid "Home page and daily tips" #~ msgstr "Hasierako orria eta eguneko aholkuak" #~ msgid "Show home page on startup" #~ msgstr "Erakutsi hasierako orria abiaraztean" #~ msgid "View control settings" #~ msgstr "Ikuspegiaren kontrolaren ezarpenak" #~ msgid "Rotate of view" #~ msgstr "Biratu ikuspegia" #~ msgid "Move of view" #~ msgstr "Mugitu ikuspegia" #~ msgid "Zoom of view" #~ msgstr "Ikuspegiaren zooma" #~ msgid "Mouse wheel reverses when zooming" #~ msgstr "Saguaren gurpilak alderantziz egiten du zooma" #~ msgid "debug save button" #~ msgstr "arazketa gordetzeko botoia" #~ msgid "save debug settings" #~ msgstr "gorde arazketa-ezarpenak" #~ msgid "DEBUG settings have been saved successfully!" #~ msgstr "DEBUG ezarpenak behar bezala gorde dira!" #~ msgid "Cloud environment switched, please login again!" #~ msgstr "Hodeiko ingurunea aldatu da. Hasi saioa berriro!" #~ msgid "Please choose the filament color" #~ msgstr "Hautatu filamentuaren kolorea" #~ msgid "Add/Remove filaments" #~ msgstr "Gehitu/Kendu filamentuak" #~ msgid "Same as Global Bed Type" #~ msgstr "Ohe mota globalaren berdina" #~ msgid "Slice all plate to obtain time and filament estimation" #~ msgstr "Xerratu plaka guztiak denbora- eta filamentu-estimazioa lortzeko" #~ msgid "Packing project data into 3mf file" #~ msgstr "Proiektu-datuak 3mf fitxategian paketatzen" #~ msgid "Uploading 3mf" #~ msgstr "3mf igotzen" #~ msgid "Packing data to 3mf" #~ msgstr "Datuak 3mf-ra paketatzen" #~ msgid "Please note that saving will overwrite this preset." #~ msgstr "Kontuan izan gordetzean aurrezarpen hau gainidatziko dela." #~ msgid "Can't find my devices?" #~ msgstr "Ezin dituzu zure gailuak aurkitu?" #~ msgid "Send print job to" #~ msgstr "Bidali inprimatze-lana hona:" #~ msgid "send completed" #~ msgstr "bidalketa osatuta" #~ msgid "No login account, only printers in LAN mode are displayed" #~ msgstr "Ez dago saioa hasitako konturik; LAN moduko inprimagailuak bakarrik bistaratzen dira" #~ msgid "Connecting to server" #~ msgstr "Zerbitzarira konektatzen" #~ msgid "Synchronizing device information" #~ msgstr "Gailuaren informazioa sinkronizatzen" #~ msgid "Synchronizing device information time out" #~ msgstr "Gailuaren informazioa sinkronizatzeko denbora agortu da" #~ msgid "Cannot send the print job when the printer is updating firmware" #~ msgstr "Ezin da inprimatze-lana bidali inprimagailua firmwarea eguneratzen ari denean" #~ msgid "The printer is executing instructions. Please restart printing after it ends" #~ msgstr "Inprimagailua jarraibideak exekutatzen ari da. Berrabiarazi inprimaketa amaitzen denean" #~ msgid "The printer is busy on other print job" #~ msgstr "Inprimagailua beste inprimatze-lan batekin okupatuta dago" #, c-format, boost-format #~ msgid "Filament %s exceeds the number of AMS slots. Please update the printer firmware to support AMS slot assignment." #~ msgstr "%s filamentuak AMS zirrikituen kopurua gainditzen du. Eguneratu inprimagailuaren firmwarea AMS zirrikitu-esleipena onartzeko." #~ msgid "Filament exceeds the number of AMS slots. Please update the printer firmware to support AMS slot assignment." #~ msgstr "Filamentuak AMS zirrikituen kopurua gainditzen du. Eguneratu inprimagailuaren firmwarea AMS zirrikitu-esleipena onartzeko." #~ msgid "Filaments to AMS slots mappings have been established. You can click a filament above to change its mapping AMS slot" #~ msgstr "Filamentuen eta AMS zirrikituen esleipenak ezarri dira. Goiko filamentuan klik egin dezakezu AMS zirrikitu-esleipena aldatzeko" #~ msgid "Please click each filament above to specify its mapping AMS slot before sending the print job" #~ msgstr "Egin klik goiko filamentuetako bakoitzean dagokion AMS zirrikitua zehazteko inprimatze-lana bidali aurretik" #~ msgid "The printer firmware only supports sequential mapping of filament => AMS slot." #~ msgstr "Inprimagailuaren firmwareak filamentua => AMS zirrikitua esleipen sekuentziala bakarrik onartzen du." #~ msgid "An SD card needs to be inserted before printing." #~ msgstr "SD txartela sartu behar da inprimatu aurretik." #~ msgid "An SD card needs to be inserted to record timelapse." #~ msgstr "SD txartela sartu behar da time-lapsea grabatzeko." #~ msgid "Cannot send the print job to a printer whose firmware is required to get updated." #~ msgstr "Ezin da inprimatze-lana bidali firmwarea eguneratu behar duen inprimagailu batera." #~ msgid "Cannot send the print job for empty plate" #~ msgstr "Ezin da plaka hutsaren inprimatze-lana bidali" #~ msgid "This printer does not support printing all plates" #~ msgstr "Inprimagailu honek ez du plaka guztiak inprimatzea onartzen" #~ msgid "When enable spiral vase mode, machines with I3 structure will not generate timelapse videos." #~ msgstr "Espiral formako loreontzi modua gaitzean, I3 egiturako makinek ez dute timelapse bideorik sortuko." #~ msgid "There are some unknown filaments in the AMS mappings. Please check whether they are the required filaments. If they are okay, press \"Confirm\" to start printing." #~ msgstr "AMS esleipenetan filamentuen batzuk ezezagunak dira. Egiaztatu behar diren filamentuak diren. Ondo badaude, sakatu \"Berretsi\" inprimatzen hasteko." #, c-format, boost-format #~ msgid "nozzle in preset: %s %s" #~ msgstr "aurrezarpeneko pita: %s %s" #, c-format, boost-format #~ msgid "nozzle memorized: %.2f %s" #~ msgstr "memorizatutako pita: %.2f %s" #~ msgid "Your nozzle diameter in sliced file is not consistent with memorized nozzle. If you changed your nozzle lately, please go to Device > Printer Parts to change settings." #~ msgstr "Xerratutako fitxategiko pitaren diametroa ez dator bat memorian dagoen pitarekin. Duela gutxi pita aldatu baduzu, joan Gailua > Inprimagailuaren piezak atalera ezarpenak aldatzeko." #, c-format, boost-format #~ msgid "Printing high temperature material (%s material) with %s may cause nozzle damage" #~ msgstr "Tenperatura altuko materiala (%s materiala) %s-rekin inprimatzeak pita kaltetu dezake" #~ msgid "Connecting to the printer. Unable to cancel during the connection process." #~ msgstr "Inprimagailura konektatzen. Ezin da bertan behera utzi konektatzeko prozesuan." #~ msgid "Caution to use! Flow calibration on Textured PEI Plate may fail due to the scattered surface." #~ msgstr "Kontuz erabili! Fluxu-kalibrazioak huts egin dezake testuradun PEI plakan, gainazal sakabanatuagatik." #~ msgid "Automatic flow calibration using Micro Lidar" #~ msgstr "Fluxuaren kalibrazio automatikoa Micro Lidar erabiliz" #~ msgid "Send to Printer SD card" #~ msgstr "Bidali inprimagailuaren SD txartelera" #~ msgid "Cannot send the print task when the upgrade is in progress" #~ msgstr "Ezin da inprimatze-zeregina bidali eguneratzea martxan dagoenean" #~ msgid "An SD card needs to be inserted before send to printer SD card." #~ msgstr "SD txartela sartu behar da inprimagailuaren SD txartelera bidali aurretik." #~ msgid "The printer is required to be in the same LAN as Orca Slicer." #~ msgstr "Inprimagailuak Orca Slicerren LAN berean egon behar du." #~ msgid "The printer does not support sending to printer SD card." #~ msgstr "Inprimagailuak ez du SD txartelera bidaltzea onartzen." #~ msgid "Slice ok." #~ msgstr "Xerraketa ondo." #~ msgid "Get ticket from device timeout" #~ msgstr "Gailutik txartela lortzeko denbora agortu da" #~ msgid "Get ticket from server timeout" #~ msgstr "Zerbitzaritik txartela lortzeko denbora agortu da" #~ msgid "A prime tower is required for smooth timelapse. There may be flaws on the model without prime tower. Are you sure you want to disable prime tower?" #~ msgstr "Purgatze-dorre bat behar da timelapse leuna egiteko. Purgatze-dorrerik gabe akatsak egon daitezke modeloan. Ziur zaude purgatze-dorrea desgaitu nahi duzula?" #~ msgid "A prime tower is required for smooth timelapse. There may be flaws on the model without prime tower. Do you want to enable prime tower?" #~ msgstr "Purgatze-dorre bat behar da timelapse leuna egiteko. Purgatze-dorrerik gabe akatsak egon daitezke modeloan. Purgatze-dorrea gaitu nahi duzu?" #~ msgid "" #~ "When using support material for the support interface, we recommend the following settings:\n" #~ "0 top z distance, 0 interface spacing, interlaced rectilinear pattern and disable independent support layer height" #~ msgstr "" #~ "Euskarri-interfazearentzako euskarri-materiala erabiltzean, ezarpen hauek gomendatzen ditugu:\n" #~ "goiko z distantzia 0, interfazearen arteko tartea 0, gurutzatutako patroi zuzena eta euskarrien geruza-altuera independentea desgaituta" #~ msgid "" #~ "Change these settings automatically?\n" #~ "Yes - Change these settings automatically\n" #~ "No - Do not change these settings for me" #~ msgstr "" #~ "Ezarpen hauek automatikoki aldatu?\n" #~ "Bai - Aldatu ezarpen hauek automatikoki\n" #~ "Ez - Ez aldatu ezarpen hauek nire ordez" #~ msgid "Initial layer speed" #~ msgstr "Hasierako geruzaren abiadura" #~ msgid "Support filament" #~ msgstr "Euskarrien filamentua" #, c-format, boost-format #~ msgid "" #~ "Following line %s contains reserved keywords.\n" #~ "Please remove it, or will beat G-code visualization and printing time estimation." #~ msgid_plural "" #~ "Following lines %s contain reserved keywords.\n" #~ "Please remove them, or will beat G-code visualization and printing time estimation." #~ msgstr[0] "" #~ "Hurrengo %s lerroak erreserbatutako gako-hitzak ditu.\n" #~ "Kendu, bestela G-codearen bistaratzea eta inprimatze-denboraren estimazioa hondatuko ditu." #~ msgstr[1] "" #~ "Hurrengo %s lerroek erreserbatutako gako-hitzak dituzte.\n" #~ "Kendu, bestela G-codearen bistaratzea eta inprimatze-denboraren estimazioa hondatuko dituzte." #~ msgid "Recommended nozzle temperature range of this filament. 0 means no set" #~ msgstr "Filamentu honen pitarako gomendatutako tenperatura-tartea. 0k ezarri gabe dagoela esan nahi du" #~ msgid "Bed temperature when the Cool Plate Supertack is installed. A value of 0 means the filament does not support printing on the Cool Plate SuperTack." #~ msgstr "Supertack Plaka Hotza instalatuta dagoenean ohearen tenperatura. 0 balioak esan nahi du filamentuak ez duela Supertack Plaka Hotzaren gainean inprimatzea onartzen." #~ msgid "Bed temperature when the Cool Plate is installed. A value of 0 means the filament does not support printing on the Cool Plate." #~ msgstr "Ohearen tenperatura plaka hotza ipinita dagoenean. 0 balioak esan nahi du filamentuak ez duela plaka hotzaren gainean inprimatzea onartzen." #~ msgid "Bed temperature when the Textured Cool Plate is installed. A value of 0 means the filament does not support printing on the Textured Cool Plate." #~ msgstr "Ohearen tenperatura testuradun plaka hotza ipinita dagoenean. 0 balioak esan nahi du filamentuak ez duela testuradun plaka hotzaren gainean inprimatzea onartzen." #~ msgid "Bed temperature when the Engineering Plate is installed. A value of 0 means the filament does not support printing on the Engineering Plate." #~ msgstr "Ingeniaritza-plaka instalatuta dagoenean ohearen tenperatura. 0 balioak esan nahi du filamentuak ez duela ingeniaritza-plakaren gainean inprimatzea onartzen." #~ msgid "Bed temperature when the Smooth PEI Plate/High Temperature Plate is installed. A value of 0 means the filament does not support printing on the Smooth PEI Plate/High Temp Plate." #~ msgstr "PEI plaka leuna/Tenperatura altuko plaka instalatuta dagoenean ohearen tenperatura. 0 balioak esan nahi du filamentuak ez duela PEI plaka leunean/tenperatura altuko plakan inprimatzea onartzen." #~ msgid "Bed temperature when the Textured PEI Plate is installed. A value of 0 means the filament does not support printing on the Textured PEI Plate." #~ msgstr "Ohearen tenperatura testuradun PEI plaka instalatuta dagoenean. 0 balioak esan nahi du filamentuak ez duela testuradun PEI plakan inprimatzea onartzen." #~ msgid "Part cooling fan speed will start to run at min speed when the estimated layer time is no longer than the layer time in setting. When layer time is shorter than threshold, fan speed is interpolated between the minimum and maximum fan speed according to layer printing time" #~ msgstr "Piezaren hozte-haizagailua gutxieneko abiaduran hasiko da estimatutako geruza-denbora ezarpeneko geruza-denbora baino luzeagoa ez denean. Geruza-denbora atalasea baino laburragoa denean, haizagailuaren abiadura gutxienekoaren eta gehienekoaren artean interpolatzen da geruza inprimatzeko denboraren arabera" #~ msgid "Part cooling fan speed will be max when the estimated layer time is shorter than the setting value" #~ msgstr "Piezaren hozte-haizagailua gehieneko abiaduran egongo da estimatutako geruza-denbora ezarritako balioa baino laburragoa denean" #~ msgid "Ramming settings" #~ msgstr "Ramming ezarpenak" #~ msgid "Profile dependencies" #~ msgstr "Profilaren mendekotasunak" #~ msgid "" #~ "Single Extruder Multi Material is selected, \n" #~ "and all extruders must have the same diameter.\n" #~ "Do you want to change the diameter for all extruders to first extruder nozzle diameter value?" #~ msgstr "" #~ "Estrusore bakarreko material anitzeko aukera hautatuta dago, \n" #~ "eta estrusore guztiek diametro bera izan behar dute.\n" #~ "Estrusore guztien diametroa lehen estrusorearen pitaren diametro-baliora aldatu nahi duzu?" #~ msgid "" #~ "The Wipe option is not available when using the Firmware Retraction mode.\n" #~ "\n" #~ "Shall I disable it in order to enable Firmware Retraction?" #~ msgstr "" #~ "Purgatzeko aukera ez dago erabilgarri Firmware bidezko atzera-egite modua erabiltzean.\n" #~ "\n" #~ "Desgaitu dezadan Firmware bidezko atzera-egitea gaitzeko?" #~ msgid "Following preset will be deleted too." #~ msgid_plural "Following presets will be deleted too." #~ msgstr[0] "Hurrengo aurrezarpena ere ezabatuko da." #~ msgstr[1] "Hurrengo aurrezarpenak ere ezabatuko dira." #, boost-format #~ msgid "Are you sure to %1% the selected preset?" #~ msgstr "Ziur hautatutako aurrezarpena %1% nahi duzula?" #~ msgid "Click to drop current modify and reset to saved value." #~ msgstr "Egin klik uneko aldaketa baztertzeko eta gordetako baliora berrezartzeko." #~ msgid "Undef" #~ msgstr "Definitu gabe" #~ msgid "Unsaved Changes" #~ msgstr "Gorde gabeko aldaketak" #~ msgid "All changes will not be saved" #~ msgstr "Aldaketa guztiak ez dira gordeko" #~ msgid "Extruders count" #~ msgstr "Estrusore kopurua" #~ msgid "the Configuration package is incompatible with the current APP." #~ msgstr "Konfigurazio-paketea ez da bateragarria uneko aplikazioarekin." #~ msgid "Obj file Import color" #~ msgstr "OBJ fitxategiaren inportazio-kolorea" #, c-format, boost-format #~ msgid "The color count should be in range [%d, %d]." #~ msgstr "Kolore kopuruak [%d, %d] barrutian egon behar du." #~ msgid "Current filament colors:" #~ msgstr "Uneko filamentuen koloreak:" #~ msgid "Quick set:" #~ msgstr "Ezarpen azkarra:" #~ msgid "Add consumable extruder after existing extruders." #~ msgstr "Gehitu estrusore kontsumigarria lehendik dauden estrusoreen ondoren." #~ msgid "Cluster colors" #~ msgstr "Koloreak multzokatu" #~ msgid "Map Filament" #~ msgstr "Mapatu filamentua" #~ msgid "" #~ "Note: The color has been selected, you can choose OK \n" #~ "to continue or manually adjust it." #~ msgstr "" #~ "Oharra: kolorea hautatu da; Ados aukeratu dezakezu \n" #~ "jarraitzeko edo eskuz doitzeko." #~ msgid "" #~ "Warning: The count of newly added and \n" #~ "current extruders exceeds 16." #~ msgstr "" #~ "Abisua: gehitu berri diren eta \n" #~ "uneko estrusoreen kopuruak 16 gainditzen du." #~ msgid "Total ramming time" #~ msgstr "Ramming denbora guztira" #~ msgid "Total rammed volume" #~ msgstr "Ramming bolumena guztira" #~ msgid "Ramming line width" #~ msgstr "Ramming lerro-zabalera" #~ msgid "Ramming line spacing" #~ msgstr "Ramming lerro-tartea" #~ msgid "Auto-Calc" #~ msgstr "Kalkulu automatikoa" #~ msgid "Orca would re-calculate your flushing volumes every time the filaments color changed. You could disable the auto-calculate in Orca Slicer > Preferences" #~ msgstr "Orcak purgatze-bolumenak berriro kalkulatuko ditu filamentuen kolorea aldatzen den bakoitzean. Kalkulu automatikoa desgaitu dezakezu Orca Slicer > Hobespenak atalean" #~ msgid "unloaded" #~ msgstr "deskargatuta" #~ msgid "loaded" #~ msgstr "kargatuta" #~ msgid "Filament #" #~ msgstr "Filamentu #" #~ msgid "From" #~ msgstr "Nondik" #~ msgid "To" #~ msgstr "Nora" #~ msgid "Missing BambuSource component registered for media playing! Please re-install BambuStudio or seek after-sales help." #~ msgstr "Multimedia erreproduzitzeko erregistratutako BambuSource osagaia falta da! Berrinstalatu BambuStudio edo eskatu saldu osteko laguntza." #~ msgid "⌘+Shift+G" #~ msgstr "⌘+Shift+G" #~ msgid "Ctrl+Shift+G" #~ msgstr "Ctrl+Shift+G" #~ msgid "Shift+A" #~ msgstr "Shift+A" #~ msgid "Shift+R" #~ msgstr "Shift+R" #~ msgid "Shift+Tab" #~ msgstr "Shift+Tab" #~ msgid "⌘+Any arrow" #~ msgstr "⌘+Edozein gezi" #~ msgid "⌥+Left mouse button" #~ msgstr "⌥+Saguaren ezkerreko botoia" #~ msgid "⌘+Left mouse button" #~ msgstr "⌘+Saguaren ezkerreko botoia" #~ msgid "Ctrl+Any arrow" #~ msgstr "Ctrl+Edozein gezi" #~ msgid "Alt+Left mouse button" #~ msgstr "Alt+Saguaren ezkerreko botoia" #~ msgid "Ctrl+Left mouse button" #~ msgstr "Ctrl+Saguaren ezkerreko botoia" #~ msgid "Shift+Left mouse button" #~ msgstr "Shift+Saguaren ezkerreko botoia" #~ msgid "Move selection 10 mm in positive Y direction" #~ msgstr "Mugitu hautaketa 10 mm Y norabide positiboan" #~ msgid "Move selection 10 mm in negative Y direction" #~ msgstr "Mugitu hautaketa 10 mm Y norabide negatiboan" #~ msgid "Move selection 10 mm in negative X direction" #~ msgstr "Mugitu hautaketa 10 mm X norabide negatiboan" #~ msgid "Move selection 10 mm in positive X direction" #~ msgstr "Mugitu hautaketa 10 mm X norabide positiboan" #~ msgid "Shift+Any arrow" #~ msgstr "Shift+Edozein gezi" #~ msgid "Movement step set to 1 mm" #~ msgstr "Mugimendu-urratsa 1 mm-ra ezarri da" #~ msgid "keyboard 1-9: set filament for object/part" #~ msgstr "teklatua 1-9: ezarri objektu/partearentzako filamentua" #~ msgid "⌘+Mouse wheel" #~ msgstr "⌘+Saguaren gurpila" #~ msgid "⌥+Mouse wheel" #~ msgstr "⌘+ Saguaren gurpila" #~ msgid "Ctrl+Mouse wheel" #~ msgstr "Ctrl+Saguaren gurpila" #~ msgid "Alt+Mouse wheel" #~ msgstr "Alt+Saguaren gurpila" #~ msgid "Shift+Mouse wheel" #~ msgstr "Shift+Saguaren gurpila" #~ msgid "Click OK to update the Network plug-in when Orca Slicer launches next time." #~ msgstr "Egin klik Ados sareko plugina eguneratzeko Orca Slicer hurrengo aldiz abiarazten denean." #~ msgid "resume" #~ msgstr "berrekin" #~ msgid "Resume Printing (defects acceptable)" #~ msgstr "Berrekin inprimaketari (akatsak onargarriak)" #~ msgid "Resume Printing (problem solved)" #~ msgstr "Berrekin inprimaketari (arazoa konponduta)" #~ msgid "Load Filament" #~ msgstr "Kargatu filamentua" #~ msgid "Step 1. Please confirm Orca Slicer and your printer are in the same LAN." #~ msgstr "1. urratsa. Berretsi Orca Slicer eta zure inprimagailua LAN berean daudela." #~ msgid "Step 2. If the IP and Access Code below are different from the actual values on your printer, please correct them." #~ msgstr "2. urratsa. Beheko IPa eta sarbide-kodea zure inprimagailuko benetako balioekin bat ez badatoz, zuzendu." #~ msgid "Step 3. Please obtain the device SN from the printer side; it is usually found in the device information on the printer screen." #~ msgstr "3. urratsa. Lortu gailuaren SN inprimagailutik; normalean inprimagailuaren pantailako gailu-informazioan agertzen da." #~ msgid "An important update was detected and needs to be run before printing can continue. Do you want to update now? You can also update later from 'Upgrade firmware'." #~ msgstr "Eguneratze garrantzitsu bat detektatu da eta inprimaketak jarraitu aurretik exekutatu behar da. Orain eguneratu nahi duzu? Geroago ere eguneratu dezakezu 'Eguneratu firmwarea' ataletik." #~ msgid "The firmware version is abnormal. Repairing and updating are required before printing. Do you want to update now? You can also update later on printer or update next time starting Orca." #~ msgstr "Firmwarearen bertsioa anormala da. Inprimatu aurretik konpondu eta eguneratu behar da. Orain eguneratu nahi duzu? Geroago ere eguneratu dezakezu inprimagailuan edo Orca hurrengo aldiz abiaraztean." #~ msgid "Saving objects into the 3mf failed." #~ msgstr "Objektuak 3mf fitxategian gordetzeak huts egin du." #~ msgid "Only Windows 10 is supported." #~ msgstr "Windows 10 soilik onartzen da." #~ msgid "Failed to initialize the WinRT library." #~ msgstr "WinRT liburutegia hasieratzeak huts egin du." #~ msgid "Exporting objects" #~ msgstr "Objektuak esportatzen" #~ msgid "Failed loading objects." #~ msgstr "Objektuak kargatzeak huts egin du." #~ msgid "Repairing object by Windows service" #~ msgstr "Objektua Windows zerbitzuaren bidez konpontzen" #~ msgid "Repair failed." #~ msgstr "Konponketak huts egin du." #~ msgid "Loading repaired objects" #~ msgstr "Konpondutako objektuak kargatzen" #~ msgid "Exporting 3mf file failed" #~ msgstr "3mf fitxategia esportatzeak huts egin du" #~ msgid "Import 3mf file failed" #~ msgstr "3mf fitxategia inportatzeak huts egin du" #~ msgid "Repaired 3mf file does not contain any object" #~ msgstr "Konpondutako 3mf fitxategiak ez du objekturik" #~ msgid "Repaired 3mf file contains more than one object" #~ msgstr "Konpondutako 3mf fitxategiak objektu bat baino gehiago du" #~ msgid "Repaired 3mf file does not contain any volume" #~ msgstr "Konpondutako 3mf fitxategiak ez du bolumenik" #~ msgid "Repaired 3mf file contains more than one volume" #~ msgstr "Konpondutako 3mf fitxategiak bolumen bat baino gehiago du" #~ msgid "Need to check the unsaved changes before configuration updates." #~ msgstr "Gorde gabeko aldaketak egiaztatu behar dira konfigurazio-eguneratzeen aurretik." #~ msgid "One object has empty initial layer and can't be printed. Please Cut the bottom or enable supports." #~ msgstr "Objektu batek hasierako geruza hutsa du eta ezin da inprimatu. Moztu behealdea edo gaitu euskarriak." #, boost-format #~ msgid "Object can't be printed for empty layer between %1% and %2%." #~ msgstr "Objektua ezin da inprimatu %1% eta %2% arteko geruza hutsagatik." #~ msgid "Maybe parts of the object at these height are too thin, or the object has faulty mesh" #~ msgstr "Baliteke altuera horietan objektuaren zatiak meheegiak izatea, edo objektuak sare akastuna izatea" #~ msgid "No object can be printed. Maybe too small" #~ msgstr "Ezin da objekturik inprimatu. Agian txikiegia da" #, boost-format #~ msgid "Failed to calculate line width of %1%. Cannot get value of \"%2%\" " #~ msgstr "Huts egin du %1%-(r)en lerro-zabalera kalkulatzean. Ezin da \"%2%\" balioa lortu " #~ msgid "file too large" #~ msgstr "fitxategia handiegia da" #~ msgid "unsupported multidisk" #~ msgstr "onartu gabeko disko anitzekoa" #~ msgid "buffer too small" #~ msgstr "bufferra txikiegia da" #~ msgid "archive too large" #~ msgstr "artxiboa handiegia da" #, boost-format #~ msgid "%1% is too close to exclusion area, there may be collisions when printing." #~ msgstr "%1% baztertze-eremutik gertuegi dago; talkak egon daitezke inprimatzean." #~ msgid " is too close to others, there may be collisions when printing." #~ msgstr " besteetatik gertuegi dago; talkak egon daitezke inprimatzean." #~ msgid " is too close to exclusion area, and collisions will be caused.\n" #~ msgstr " baztertze-eremutik gertuegi dago, eta talkak sortuko dira.\n" #~ msgid "Cannot print multiple filaments which have large difference of temperature together. Otherwise, the extruder and nozzle may be blocked or damaged during printing." #~ msgstr "Ezin dira batera inprimatu tenperatura-alde handia duten hainbat filamentu. Bestela, estrusorea eta pita buxatu edo kaltetu daitezke inprimatzean." #~ msgid "The spiral vase mode does not work when an object contains more than one materials." #~ msgstr "Espiral formako loreontzi moduak ez du funtzionatzen objektuak material bat baino gehiago dituenean." #~ msgid "The prime tower is not supported in \"By object\" print." #~ msgstr "Purgatze-dorrea ez da onartzen \"Objektuka\" inprimatzean." #~ msgid "The prime tower is not supported when adaptive layer height is on. It requires that all objects have the same layer height." #~ msgstr "Purgatze-dorrea ez da onartzen geruza-altuera egokigarria aktibatuta dagoenean. Objektu guztiek geruzaren altuera bera izatea eskatzen du." #~ msgid "The prime tower requires \"support gap\" to be multiple of layer height." #~ msgstr "Purgatze-dorreak \"euskarri-tartea\" geruza-altueraren multiploa izatea behar du." #~ msgid "The prime tower requires that all objects have the same layer heights." #~ msgstr "Purgatze-dorreak objektu guztiek geruza-altuera bera izatea behar du." #~ msgid "The prime tower requires that all objects are printed over the same number of raft layers." #~ msgstr "Purgatze-dorreak objektu guztiak baltsa-geruza kopuru beraren gainean inprimatzea behar du." #~ msgid "The prime tower requires that all objects are sliced with the same layer heights." #~ msgstr "Purgatze-dorreak objektu guztiak geruza-altuera berarekin xerratzea behar du." #~ msgid "Too small line width" #~ msgstr "Lerro-zabalera txikiegia" #~ msgid "Too large line width" #~ msgstr "Lerro-zabalera handiegia" #~ msgid "The prime tower requires that support has the same layer height with object." #~ msgstr "Purgatze-dorreak euskarriak objektuaren geruza-altuera bera izatea behar du." #~ msgid "\"G92 E0\" was found in before_layer_gcode, which is incompatible with absolute extruder addressing." #~ msgstr "\"G92 E0\" aurkitu da before_layer_gcode atalean, eta hori bateraezina da estrusorearen helbideratze absolutuarekin." #~ msgid "\"G92 E0\" was found in layer_gcode, which is incompatible with absolute extruder addressing." #~ msgstr "\"G92 E0\" aurkitu da layer_gcode atalean, eta hori bateraezina da estrusorearen helbideratze absolutuarekin." #~ msgid "Filament shrinkage will not be used because filament shrinkage for the used filaments differs significantly." #~ msgstr "Filamentuaren uzkurdura ez da erabiliko, erabilitako filamentuen uzkurdurak nabarmen desberdinak direlako." #~ msgid "Failed processing of the filename_format template." #~ msgstr "filename_format txantiloia prozesatzeak huts egin du." #~ msgid "Bed exclude area" #~ msgstr "Oheko baztertze-eremua" #~ msgid "Shrinks the initial layer on build plate to compensate for elephant foot effect." #~ msgstr "Hasierako geruza uzkurtzen du eraikitze-plakan, elefante-oinaren efektua konpentsatzeko." #~ msgid "Slicing height for each layer. Smaller layer height means more accurate and more printing time." #~ msgstr "Geruza bakoitzaren xerratze-altuera. Geruza-altuera txikiagoak zehaztasun handiagoa eta inprimatze-denbora luzeagoa dakar." #~ msgid "Maximum printable height which is limited by mechanism of printer." #~ msgstr "Inprimatzeko gehieneko altuera, inprimagailuaren mekanismoak mugatua." #~ msgid "Automatically orient stls on the Z-axis upon initial import." #~ msgstr "Orientatu STLak automatikoki Z ardatzean hasierako inportazioan." #~ msgid "Ignore HTTPS certificate revocation checks in case of missing or offline distribution points. One may want to enable this option for self signed certificates if connection fails." #~ msgstr "Ez ikusi HTTPS ziurtagirien baliogabetze-egiaztapenei banaketa-puntuak falta badira edo lineaz kanpo badaude. Konexioak huts egiten badu, aukera hau gaitu nahi izan daiteke ziurtagiri autosinatuetarako." #~ msgid "Detour to avoid traveling across walls, which may cause blobs on the surface." #~ msgstr "Saihestu hormak zeharkatzea lekualdatzean, gainazalean pikorrak sor baititzake." #~ msgid "Maximum detour distance for avoiding crossing wall. Don't detour if the detour distance is larger than this value. Detour length could be specified either as an absolute value or as percentage (for example 50%) of a direct travel path. Zero to disable." #~ msgstr "Hormak gurutzatzea saihesteko gehieneko desbideratze-distantzia. Ez desbideratu distantzia balio hau baino handiagoa bada. Desbideratze-luzera balio absolutu gisa edo lekualdatze-ibilbide zuzenaren ehuneko gisa zehaztu daiteke (adibidez, 50%). Zero, desgaitzeko." #~ msgid "Bed temperature for layers except the initial one. A value of 0 means the filament does not support printing on the Cool Plate." #~ msgstr "Ohearen tenperatura hasierakoa ez diren geruzetarako. 0 balioak esan nahi du filamentuak ez duela plaka hotzean inprimatzea onartzen." #~ msgid "°C" #~ msgstr "°C" #~ msgid "Bed temperature for layers except the initial one. A value of 0 means the filament does not support printing on the Textured Cool Plate." #~ msgstr "Ohearen tenperatura hasierakoa ez diren geruzetarako. 0 balioak esan nahi du filamentuak ez duela testuradun plaka hotzean inprimatzea onartzen." #~ msgid "Bed temperature for layers except the initial one. A value of 0 means the filament does not support printing on the Engineering Plate." #~ msgstr "Ohearen tenperatura hasierakoa ez diren geruzetarako. 0 balioak esan nahi du filamentuak ez duela ingeniaritza-plakan inprimatzea onartzen." #~ msgid "Bed temperature for layers except the initial one. A value of 0 means the filament does not support printing on the High Temp Plate." #~ msgstr "Ohearen tenperatura hasierakoa ez diren geruzetarako. 0 balioak esan nahi du filamentuak ez duela tenperatura altuko plakan inprimatzea onartzen." #~ msgid "Bed temperature for layers except the initial one. A value of 0 means the filament does not support printing on the Textured PEI Plate." #~ msgstr "Ohearen tenperatura hasierakoa ez diren geruzetarako. 0 balioak esan nahi du filamentuak ez duela testuradun PEI plakan inprimatzea onartzen." #~ msgid "Initial layer" #~ msgstr "Hasierako geruza" #~ msgid "Initial layer bed temperature" #~ msgstr "Hasierako geruzaren ohe-tenperatura" #~ msgid "Bed temperature of the initial layer. A value of 0 means the filament does not support printing on the Cool Plate SuperTack." #~ msgstr "Hasierako geruzaren ohe-tenperatura. 0 balioak esan nahi du filamentuak ez duela SuperTack plaka hotzean inprimatzea onartzen." #~ msgid "Bed temperature of the initial layer. A value of 0 means the filament does not support printing on the Cool Plate." #~ msgstr "Hasierako geruzaren ohe-tenperatura. 0 balioak esan nahi du filamentuak ez duela plaka hotzean inprimatzea onartzen." #~ msgid "Bed temperature of the initial layer. A value of 0 means the filament does not support printing on the Textured Cool Plate." #~ msgstr "Hasierako geruzaren ohe-tenperatura. 0 balioak esan nahi du filamentuak ez duela testuradun plaka hotzean inprimatzea onartzen." #~ msgid "Bed temperature of the initial layer. A value of 0 means the filament does not support printing on the Engineering Plate." #~ msgstr "Hasierako geruzaren ohe-tenperatura. 0 balioak esan nahi du filamentuak ez duela ingeniaritza-plakan inprimatzea onartzen." #~ msgid "Bed temperature of the initial layer. A value of 0 means the filament does not support printing on the High Temp Plate." #~ msgstr "Hasierako geruzaren ohe-tenperatura. 0 balioak esan nahi du filamentuak ez duela tenperatura altuko plakan inprimatzea onartzen." #~ msgid "Bed temperature of the initial layer. A value of 0 means the filament does not support printing on the Textured PEI Plate." #~ msgstr "Hasierako geruzaren ohe-tenperatura. 0 balioak esan nahi du filamentuak ez duela testuradun PEI plakan inprimatzea onartzen." #~ msgid "Bed types supported by the printer." #~ msgstr "Inprimagailuak onartzen dituen ohe motak." #~ msgid "The number of bottom solid layers is increased when slicing if the thickness calculated by bottom shell layers is thinner than this value. This can avoid having too thin shell when layer height is small. 0 means that this setting is disabled and thickness of bottom shell is absolutely determined by bottom shell layers." #~ msgstr "Xerratzean beheko geruza solidoen kopurua handitzen da, beheko oskol-geruzekin kalkulatutako lodiera balio hau baino txikiagoa bada. Horrela, geruza-altuera txikia denean oskol meheegia izatea saihesten da. 0 balioak ezarpen hau desgaituta dagoela esan nahi du, eta beheko oskolaren lodiera beheko oskol-geruzek soilik zehazten dute." #, no-c-format, no-boost-format #~ msgid "Bridging angle override. If left to zero, the bridging angle will be calculated automatically. Otherwise the provided angle will be used for external bridges. Use 180°for zero angle." #~ msgstr "Zubi-angelua gainidaztea. Zero utziz gero, zubi-angelua automatikoki kalkulatuko da. Bestela, emandako angelua erabiliko da kanpoko zubietarako. Erabili 180° zero angelurako." #~ msgid "" #~ "Internal bridging angle override. If left to zero, the bridging angle will be calculated automatically. Otherwise the provided angle will be used for internal bridges. Use 180°for zero angle.\n" #~ "\n" #~ "It is recommended to leave it at 0 unless there is a specific model need not to." #~ msgstr "" #~ "Barneko zubi-angelua gainidaztea. Zero utziz gero, zubi-angelua automatikoki kalkulatuko da. Bestela, emandako angelua erabiliko da barneko zubietarako. Erabili 180° zero angelurako.\n" #~ "\n" #~ "0 balioan uztea gomendatzen da, modeloaren behar zehatz batek kontrakoa eskatzen ez badu." #~ msgid "" #~ "Controls the density (spacing) of external bridge lines. 100% means solid bridge. Default is 100%.\n" #~ "\n" #~ "Lower density external bridges can help improve reliability as there is more space for air to circulate around the extruded bridge, improving its cooling speed." #~ msgstr "" #~ "Kanpoko zubi-lerroen dentsitatea (tartea) kontrolatzen du. %100ek zubi solidoa esan nahi du. Lehenetsia %100 da.\n" #~ "\n" #~ "Dentsitate txikiagoko kanpoko zubiek fidagarritasuna hobetu dezakete, aireak estruitutako zubiaren inguruan zirkulatzeko leku gehiago duelako eta hozte-abiadura hobetzen delako." #~ msgid "" #~ "Controls the density (spacing) of internal bridge lines. 100% means solid bridge. Default is 100%.\n" #~ "\n" #~ "Lower density internal bridges can help reduce top surface pillowing and improve internal bridge reliability as there is more space for air to circulate around the extruded bridge, improving its cooling speed.\n" #~ "\n" #~ "This option works particularly well when combined with the second internal bridge over infill option, further improving internal bridging structure before solid infill is extruded." #~ msgstr "" #~ "Barneko zubi-lerroen dentsitatea (tartea) kontrolatzen du. %100ek zubi solidoa esan nahi du. Balio lehenetsia %100 da.\n" #~ "\n" #~ "Dentsitate txikiagoko barne-zubiek goiko gainazaleko puztea murrizten eta barne-zubien fidagarritasuna hobetzen lagun dezakete, estruitutako zubiaren inguruan airea zirkulatzeko leku gehiago dagoelako eta hozte-abiadura hobetzen delako.\n" #~ "\n" #~ "Aukera honek bereziki ondo funtzionatzen du betegarriaren gaineko bigarren barne-zubiarekin batera, betegarri solidoa estruitu aurretik barne-zubien egitura gehiago hobetuz." #~ msgid "" #~ "Decrease this value slightly (for example 0.9) to reduce the amount of material for bridge, to improve sag.\n" #~ "\n" #~ "The actual bridge flow used is calculated by multiplying this value with the filament flow ratio, and if set, the object's flow ratio." #~ msgstr "" #~ "Txikitu pixka bat balio hau (adibidez, 0,9) zubirako material-kopurua murrizteko eta zintzilikatzea hobetzeko.\n" #~ "\n" #~ "Erabilitako zubi-fluxu erreala balio hau filamentuaren fluxu-ratioarekin eta, ezarrita badago, objektuaren fluxu-ratioarekin biderkatuz kalkulatzen da." #~ msgid "" #~ "This value governs the thickness of the internal bridge layer. This is the first layer over sparse infill. Decrease this value slightly (for example 0.9) to improve surface quality over sparse infill.\n" #~ "\n" #~ "The actual internal bridge flow used is calculated by multiplying this value with the bridge flow ratio, the filament flow ratio, and if set, the object's flow ratio." #~ msgstr "" #~ "Balio honek barneko zubi-geruzaren lodiera zehazten du. Hau da dentsitate baxuko betegarriaren gaineko lehen geruza. Jaitsi balio hau pixka bat (adibidez, 0.9) dentsitate baxuko betegarriaren gaineko gainazal-kalitatea hobetzeko.\n" #~ "\n" #~ "Erabiliko den benetako barne-zubiaren fluxua balio hau zubiaren fluxu-erlazioarekin, filamentuaren fluxu-erlazioarekin eta, ezarrita badago, objektuaren fluxu-erlazioarekin biderkatuz kalkulatzen da." #~ msgid "Improve shell precision by adjusting outer wall spacing. This also improves layer consistency." #~ msgstr "Hobetu oskolaren zehaztasuna kanpoko hormen tartea doituz. Horrek geruzen koherentzia ere hobetzen du." #~ msgid "Classic mode" #~ msgstr "Modu klasikoa" #~ msgid "Enable this option to use classic mode." #~ msgstr "Gaitu aukera hau modu klasikoa erabiltzeko." #~ msgid "Slow down for overhang" #~ msgstr "Moteldu hegaletan" #~ msgid "Enable this option to slow printing down for different overhang degree." #~ msgstr "Gaitu aukera hau inprimatzea moteltzeko hegal-maila desberdinetan." #, no-c-format, no-boost-format #~ msgid "" #~ "Enable this option to slow down printing in areas where perimeters may have curled upwards. For example, additional slowdown will be applied when printing overhangs on sharp corners like the front of the Benchy hull, reducing curling which compounds over multiple layers.\n" #~ "\n" #~ "It is generally recommended to have this option switched on unless your printer cooling is powerful enough or the print speed slow enough that perimeter curling does not happen. If printing with a high external perimeter speed, this parameter may introduce slight artifacts when slowing down due to the large variance in print speeds. If you notice artifacts, ensure your pressure advance is tuned correctly.\n" #~ "\n" #~ "Note: When this option is enabled, overhang perimeters are treated like overhangs, meaning the overhang speed is applied even if the overhanging perimeter is part of a bridge. For example, when the perimeters are 100% overhanging, with no wall supporting them from underneath, the 100% overhang speed will be applied." #~ msgstr "" #~ "Gaitu aukera hau perimetroak gorantz kiribildu daitezkeen eremuetan inprimatzea moteltzeko. Adibidez, moteltze gehigarria aplikatuko da Benchy ontziaren aurrealdeko ertz zorrotzetako irtenguneak inprimatzean, geruzaz geruza areagotzen den kiribiltzea murriztuz.\n" #~ "\n" #~ "Oro har, gomendatzen da aukera hau aktibatuta izatea, zure inprimagailuaren hoztea nahikoa indartsua edo inprimatze-abiadura nahikoa motela ez bada behintzat. Kanpoko perimetro-abiadura handiarekin inprimatuz gero, parametro honek artefaktu arinak sor ditzake moteltzean, inprimatze-abiaduren aldakortasun handia dela eta. Artefaktuak ikusten badituzu, ziurtatu pressure advance ondo doituta dagoela.\n" #~ "\n" #~ "Oharra: aukera hau gaituta dagoenean, irtengune-perimetroak irtengune gisa tratatzen dira; horrek esan nahi du irtengune-abiadura aplikatzen dela, nahiz eta irtengune-perimetroa zubi baten parte izan. Adibidez, perimetroak %100 irtengune badira eta azpitik hormarik ez badute, %100eko irtengune-abiadura aplikatuko da." #~ msgid "Distance from model to the outermost brim line." #~ msgstr "Modelotik itsaspen ertzaren lerro kanpokoenerako distantzia." #~ msgid "A gap between innermost brim line and object can make brim be removed more easily." #~ msgstr "Itsaspen ertzeko lerro barrukoenaren eta objektuaren arteko tarteak itsaspen ertza-a errazago kentzen lagun dezake." #~ msgid "Compatible machine" #~ msgstr "Makina bateragarria" #~ msgid "Compatible machine condition" #~ msgstr "Makina bateragarriaren baldintza" #~ msgid "A boolean expression using the configuration values of an active printer profile. If this expression evaluates to true, this profile is considered compatible with the active printer profile." #~ msgstr "Inprimagailu-profil aktiboaren konfigurazio-balioak erabiltzen dituen adierazpen boolearra. Adierazpenak egia ematen badu, profil hau inprimagailu-profil aktiboarekin bateragarritzat hartuko da." #~ msgid "Compatible process profiles condition" #~ msgstr "Prozesu-profil bateragarrien baldintza" #~ msgid "A boolean expression using the configuration values of an active print profile. If this expression evaluates to true, this profile is considered compatible with the active print profile." #~ msgstr "Inprimatze-profil aktiboaren konfigurazio-balioak erabiltzen dituen adierazpen boolearra. Adierazpenak egia ematen badu, profil hau inprimatze-profil aktiboarekin bateragarritzat hartuko da." #~ msgid "Print sequence, layer by layer or object by object." #~ msgstr "Inprimatze-sekuentzia, geruzaz geruza edo objektuz objektu." #~ msgid "Enable this option to slow printing speed down to make the final layer time not shorter than the layer time threshold in \"Max fan speed threshold\", so that layer can be cooled for longer time. This can improve the cooling quality for needle and small details." #~ msgstr "Enable this option to slow printing speed down to make the final layer time not shorter than the layer time threshold in \"Max fan speed threshold\", so that layer can be cooled for longer time. This can improve the cooling quality for needle and small details." #~ msgid "The default acceleration of both normal printing and travel except initial layer." #~ msgstr "Inprimatze arruntaren eta lekualdatzearen azelerazio lehenetsia, hasierako geruzan izan ezik." #~ msgid "Don't support the whole bridge area which make support very large. Bridges can usually be printed directly without support if not very long." #~ msgstr "Ez jarri euskarririk zubi-eremu osoari, horrek euskarria oso handia egiten baitu. Zubiak normalean zuzenean inprima daitezke euskarririk gabe, oso luzeak ez badira." #~ msgid "If enabled, bridges are more reliable, can bridge longer distances, but may look worse. If disabled, bridges look better but are reliable just for shorter bridged distances." #~ msgstr "Gaituta badago, zubiak fidagarriagoak dira eta distantzia luzeagoak zubi ditzakete, baina itxura okerragoa izan dezakete. Desgaituta badago, zubiek itxura hobea dute, baina zubi-distantzia laburretan soilik dira fidagarriak." #~ msgid "If enabled, thick internal bridges will be used. It's usually recommended to have this feature turned on. However, consider turning it off if you are using large nozzles." #~ msgstr "Gaituta badago, barneko zubi lodiak erabiliko dira. Normalean ezaugarri hau aktibatuta izatea gomendatzen da. Hala ere, kontuan hartu desaktibatzea pita handiak erabiltzen badituzu." #~ msgid "" #~ "This option can help reduce pillowing on top surfaces in heavily slanted or curved models.\n" #~ "By default, small internal bridges are filtered out and the internal solid infill is printed directly over the sparse infill. This works well in most cases, speeding up printing without too much compromise on top surface quality.\n" #~ "However, in heavily slanted or curved models, especially where too low a sparse infill density is used, this may result in curling of the unsupported solid infill, causing pillowing.\n" #~ "Enabling limited filtering or no filtering will print internal bridge layer over slightly unsupported internal solid infill. The options below control the sensitivity of the filtering, i.e. they control where internal bridges are created:\n" #~ "1. Filter - enables this option. This is the default behavior and works well in most cases\n" #~ "2. Limited filtering - creates internal bridges on heavily slanted surfaces while avoiding unnecessary bridges. This works well for most difficult models\n" #~ "3. No filtering - creates internal bridges on every potential internal overhang. This option is useful for heavily slanted top surface models; however, in most cases, it creates too many unnecessary bridges" #~ msgstr "" #~ "Aukera honek goiko gainazaletan puztea murrizten lagun dezake oso inklinatutako edo kurbatutako modeloetan.\n" #~ "Lehenespenez, barne-zubi txikiak iragazten dira eta barneko betegarri solidoa zuzenean inprimatzen da dentsitate baxuko betegarriaren gainean.\n" #~ "Hala ere, oso inklinatutako edo kurbatutako modeloetan, batez ere dentsitate baxuko betegarriaren dentsitatea baxuegia denean, euskarririk gabeko betegarri solidoa kiribildu daiteke eta puztea eragin.\n" #~ "Beheko aukerek iragazketaren sentikortasuna kontrolatzen dute:\n" #~ "1. Iragazi - portaera lehenetsia da\n" #~ "2. Iragazketa mugatua - barne-zubiak sortzen ditu oso inklinatutako gainazaletan, beharrezkoak ez diren zubiak saihestuz\n" #~ "3. Iragazketarik ez - barne-zubiak sortzen ditu balizko barne-irtengune guztietan" #~ msgid "Max length of bridges that don't need support. Set it to 0 if you want all bridges to be supported, and set it to a very large value if you don't want any bridges to be supported." #~ msgstr "Euskarririk behar ez duten zubien gehieneko luzera. Ezarri 0 zubi guztiek euskarria izatea nahi baduzu, eta balio oso handia zubirik euskarririk gabe uztea nahi baduzu." #~ msgid "End G-code when finishing the entire print." #~ msgstr "End G-code when finishing the entire print." #~ msgid "End G-code when finishing the printing of this filament." #~ msgstr "End G-code when finishing the printing of this filament." #~ msgid "Line pattern of top surface infill." #~ msgstr "Line pattern of top surface infill." #~ msgid "Line pattern of bottom surface infill, not bridge infill." #~ msgstr "Beheko gainazaleko betegarriaren lerro-eredua, ez zubi-betegarriarena." #~ msgid "Speed of outer wall which is outermost and visible. It's used to be slower than inner wall speed to get better quality." #~ msgstr "Kanpoen eta ikusgai dagoen hormaren abiadura. Barruko hormarena baino motelagoa izan ohi da kalitate hobea lortzeko." #~ msgid "" #~ "Print sequence of the internal (inner) and external (outer) walls.\n" #~ "\n" #~ "Use Inner/Outer for best overhangs. This is because the overhanging walls can adhere to a neighbouring perimeter while printing. However, this option results in slightly reduced surface quality as the external perimeter is deformed by being squashed to the internal perimeter.\n" #~ "\n" #~ "Use Inner/Outer/Inner for the best external surface finish and dimensional accuracy as the external wall is printed undisturbed from an internal perimeter. However, overhang performance will reduce as there is no internal perimeter to print the external wall against. This option requires a minimum of 3 walls to be effective as it prints the internal walls from the 3rd perimeter onwards first, then the external perimeter and, finally, the first internal perimeter. This option is recommended against the Outer/Inner option in most cases.\n" #~ "\n" #~ "Use Outer/Inner for the same external wall quality and dimensional accuracy benefits of Inner/Outer/Inner option. However, the z seams will appear less consistent as the first extrusion of a new layer starts on a visible surface.\n" #~ "\n" #~ " " #~ msgstr "" #~ "Barruko eta kanpoko hormen inprimatze-sekuentzia.\n" #~ "\n" #~ "Erabili Barrukoa/Kanpokoa irtengune onenetarako, irtengune-hormek ondoko perimetroari itsatsi ahal diotelako.\n" #~ "Erabili Barrukoa/Kanpokoa/Barrukoa kanpoko gainazalaren akabera eta neurri-zehaztasun onenetarako. Aukera honek gutxienez 3 horma behar ditu eraginkorra izateko.\n" #~ "Erabili Kanpokoa/Barrukoa antzeko kanpoko horma-kalitatea eta neurri-zehaztasuna lortzeko; hala ere, Z josturak ez dira hain koherenteak agertuko.\n" #~ "\n" #~ " " #~ msgid "" #~ "The direction which the wall loops are extruded when looking down from the top.\n" #~ "\n" #~ "By default all walls are extruded in counter-clockwise, unless Reverse on even is enabled. Set this to any option other than Auto will force the wall direction regardless of the Reverse on even.\n" #~ "\n" #~ "This option will be disabled if spiral vase mode is enabled." #~ msgstr "" #~ "Horma-begiztak estruitzen diren norabidea, goitik begiratuta.\n" #~ "\n" #~ "Lehenespenez, horma guztiak erlojuaren kontrako noranzkoan estruitzen dira, geruza bikoitietan alderantzikatzea gaituta ez badago. Hau Auto ez den beste edozein aukeratan ezarriz gero, hormaren norabidea behartuko da.\n" #~ "\n" #~ "Aukera hau desgaituta egongo da espiral formako loreontzi modua gaituta badago." #~ msgid "Distance of the nozzle tip to the lower rod. Used for collision avoidance in by-object printing." #~ msgstr "Pitaren puntatik beheko hagaxkarainoko distantzia. Objektuka inprimatzean talkak saihesteko erabiltzen da." #~ msgid "Distance of the nozzle tip to the lid. Used for collision avoidance in by-object printing." #~ msgstr "Pitaren puntatik estalkirainoko distantzia. Objektuka inprimatzean talkak saihesteko erabiltzen da." #~ msgid "Clearance radius around extruder. Used for collision avoidance in by-object printing." #~ msgstr "Estrusorearen inguruko segurtasun-erradioa. Objektuka inprimatzean talkak saihesteko erabiltzen da." #, no-c-format, no-boost-format #~ msgid "" #~ "Add sets of pressure advance (PA) values, the volumetric flow speeds and accelerations they were measured at, separated by a comma. One set of values per line. For example\n" #~ "0.04,3.96,3000\n" #~ "0.033,3.96,10000\n" #~ "0.029,7.91,3000\n" #~ "0.026,7.91,10000\n" #~ "\n" #~ "How to calibrate:\n" #~ "1. Run the pressure advance test for at least 3 speeds per acceleration value. It is recommended that the test is run for at least the speed of the external perimeters, the speed of the internal perimeters and the fastest feature print speed in your profile (usually its the sparse or solid infill). Then run them for the same speeds for the slowest and fastest print accelerations, and no faster than the recommended maximum acceleration as given by the Klipper input shaper\n" #~ "2. Take note of the optimal PA value for each volumetric flow speed and acceleration. You can find the flow number by selecting flow from the color scheme drop down and move the horizontal slider over the PA pattern lines. The number should be visible at the bottom of the page. The ideal PA value should be decreasing the higher the volumetric flow is. If it is not, confirm that your extruder is functioning correctly. The slower and with less acceleration you print, the larger the range of acceptable PA values. If no difference is visible, use the PA value from the faster test\n" #~ "3. Enter the triplets of PA values, Flow and Accelerations in the text box here and save your filament profile" #~ msgstr "" #~ "Gehitu pressure advance (PA) balioen multzoak, neurtu ziren fluxu bolumetrikoaren abiadurak eta azelerazioak, komaz bereizita. Balio-multzo bat lerro bakoitzeko. Adibidez:\n" #~ "0.04,3.96,3000\n" #~ "0.033,3.96,10000\n" #~ "0.029,7.91,3000\n" #~ "0.026,7.91,10000\n" #~ "\n" #~ "Nola kalibratu:\n" #~ "1. Exekutatu pressure advance proba gutxienez 3 abiaduratan azelerazio-balio bakoitzeko.\n" #~ "2. Idatzi fluxu bolumetrikoaren abiadura eta azelerazio bakoitzerako PA balio optimoa. Fluxu zenbakia kolore-eskeman fluxua hautatuta eta graduatzailea PA eredu-lerroen gainean mugituta aurki dezakezu.\n" #~ "3. Sartu PA, Fluxu eta Azelerazio balioen hirukoteak hemen dagoen testu-koadroan eta gorde filamentu-profila" #~ msgid "Enable adaptive pressure advance for overhangs (beta)" #~ msgstr "Gaitu pressure advance egokigarria irtenguneetarako (beta)" #~ msgid "Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n" #~ msgstr "Gaitu PA egokigarria irtenguneetarako eta ezaugarri beraren barruan fluxua aldatzen denean ere. Aukera esperimentala da; PA profila zehaztasunez ezarrita ez badago, uniformetasun-arazoak eragingo ditu kanpoko gainazaletan, irtenguneen aurretik eta ondoren.\n" #~ msgid "Pressure advance for bridges" #~ msgstr "Zubietarako presio-aurrerapena" #~ msgid "" #~ "Pressure advance value for bridges. Set to 0 to disable.\n" #~ "\n" #~ "A lower PA value when printing bridges helps reduce the appearance of slight under extrusion immediately after bridges. This is caused by the pressure drop in the nozzle when printing in the air and a lower PA helps counteract this." #~ msgstr "" #~ "Zubietarako presio-aurrerapen balioa. Ezarri 0 desgaitzeko.\n" #~ "\n" #~ "Zubiak inprimatzean PA balio txikiagoak zubien ondoren berehala ager daitekeen azpiestrusio arinaren itxura murrizten laguntzen du." #~ msgid "Enabling this setting means that the part cooling fan will never stop completely and will run at least at minimum speed to reduce the frequency of starting and stopping." #~ msgstr "Ezarpen hau gaituz gero, piezaren hozte-haizagailua ez da inoiz erabat geldituko eta gutxienez gutxieneko abiaduran ibiliko da, martxan jartzeen eta gelditzeen maiztasuna murrizteko." #~ msgid "Part cooling fan will be enabled for layers of which estimated time is shorter than this value. Fan speed is interpolated between the minimum and maximum fan speeds according to layer printing time." #~ msgstr "Piezaren hozte-haizagailua gaituko da zenbatetsitako denbora balio hau baino laburragoa duten geruzetan. Haizagailuaren abiadura gutxieneko eta gehieneko abiaduren artean interpolatzen da, geruzaren inprimatze-denboraren arabera." #~ msgid "Default filament color" #~ msgstr "Filamentuaren kolore lehenetsia" #~ msgid "Minimum HRC of nozzle required to print the filament. Zero means no checking of nozzle's HRC." #~ msgstr "Filamentua inprimatzeko behar den pitaren gutxieneko HRCa. Zero jarriz gero, ez da pitaren HRCa egiaztatuko." #~ msgid "This setting stands for how much volume of filament can be melted and extruded per second. Printing speed is limited by max volumetric speed, in case of too high and unreasonable speed setting. Can't be zero." #~ msgstr "Ezarpen honek segundoko urtu eta estruitu daitekeen filamentu-bolumena adierazten du. Inprimatze-abiadura gehieneko abiadura bolumetrikoak mugatzen du. Ezin da zero izan." #~ msgid "Filament diameter is used to calculate extrusion in G-code, so it is important and should be accurate." #~ msgstr "Filamentuaren diametroa G-codeko estrusioa kalkulatzeko erabiltzen da; beraz, garrantzitsua da eta zehatza izan behar du." #, no-c-format, no-boost-format #~ msgid "" #~ "Enter the shrinkage percentage that the filament will get after cooling (94% if you measure 94mm instead of 100mm). The part will be scaled in xy to compensate. Only the filament used for the perimeter is taken into account.\n" #~ "Be sure to allow enough space between objects, as this compensation is done after the checks." #~ msgstr "" #~ "Sartu filamentuak hoztu ondoren izango duen uzkurdura-portzentajea (%94, 100 mm-ren ordez 94 mm neurtzen badituzu). Pieza xy ardatzetan eskalatuko da konpentsatzeko. Perimetrorako erabilitako filamentua bakarrik hartzen da kontuan.\n" #~ "Ziurtatu objektuen artean nahikoa tarte uzten duzula, konpentsazio hau egiaztapenen ondoren egiten baita." #~ msgid "Filament density. For statistics only." #~ msgstr "Filamentuaren dentsitatea. Estatistiketarako soilik." #~ msgid "The material type of filament." #~ msgstr "Filamentuaren material mota." #~ msgid "The material softens at this temperature, so when the bed temperature is equal to or greater than this, it's highly recommended to open the front door and/or remove the upper glass to avoid clogging." #~ msgstr "Materiala tenperatura honetan biguntzen da; beraz, ohearen tenperatura honen berdina edo handiagoa bada, oso gomendagarria da aurreko atea irekitzea eta/edo goiko beira kentzea buxadura saihesteko." #~ msgid "Filament price. For statistics only." #~ msgstr "Filamentuaren prezioa. Estatistiketarako soilik." #~ msgid "Angle for sparse infill pattern, which controls the start or main direction of line." #~ msgstr "Dentsitate baxuko betegarriaren ereduaren angelua; lerroaren hasierako edo norabide nagusia kontrolatzen du." #~ msgid "Rotate solid infill direction" #~ msgstr "Biratu betegarri solidoaren norabidea" #~ msgid "Rotate the solid infill direction by 90° for each layer." #~ msgstr "Biratu betegarri solidoaren norabidea 90° geruza bakoitzean." #~ msgid "Line pattern for internal sparse infill." #~ msgstr "Barneko dentsitate baxuko betegarriaren lerro-eredua." #~ msgid "2D Lattice" #~ msgstr "2D sare-egitura" #~ msgid "Lattice angle 1" #~ msgstr "Sare-egituraren 1. angelua" #~ msgid "The angle of the first set of 2D lattice elements in the Z direction. Zero is vertical." #~ msgstr "2D sare-egiturako elementuen lehen multzoaren angelua Z norabidean. Zero bertikala da." #~ msgid "Lattice angle 2" #~ msgstr "Sare-egituraren 2. angelua" #~ msgid "The angle of the second set of 2D lattice elements in the Z direction. Zero is vertical." #~ msgstr "2D sare-egiturako elementuen bigarren multzoaren angelua Z norabidean. Zero bertikala da." #~ msgid "Acceleration of outer walls." #~ msgstr "Kanpoko hormen azelerazioa." #~ msgid "Acceleration of top surface infill. Using a lower value may improve top surface quality." #~ msgstr "Goiko gainazaleko betegarriaren azelerazioa. Balio txikiagoa erabiltzeak goiko gainazalaren kalitatea hobetu dezake." #~ msgid "Acceleration of outer wall. Using a lower value can improve quality." #~ msgstr "Kanpoko hormaren azelerazioa. Balio txikiagoa erabiltzeak kalitatea hobetu dezake." #~ msgid "Acceleration of initial layer. Using a lower value can improve build plate adhesion." #~ msgstr "Hasierako geruzaren azelerazioa. Balio txikiagoa erabiltzeak eraikitze-plakarekiko itsaspena hobetu dezake." #~ msgid "Jerk for initial layer." #~ msgstr "Hasierako geruzaren jerk-a." #~ msgid "Line width of initial layer. If expressed as a %, it will be computed over the nozzle diameter." #~ msgstr "Hasierako geruzaren lerro-zabalera. %-tan adierazten bada, pitaren diametroaren arabera kalkulatuko da." #~ msgid "Initial layer height" #~ msgstr "Hasierako geruzaren altuera" #~ msgid "Height of initial layer. Making initial layer height to be thick slightly can improve build plate adhesion." #~ msgstr "Hasierako geruzaren altuera. Hasierako geruzaren altuera pixka bat lodiago egiteak eraikuntza-plakarekiko itsaspena hobetu dezake." #~ msgid "Speed of initial layer except the solid infill part." #~ msgstr "Hasierako geruzaren abiadura, betegarri solidoaren zatia izan ezik." #~ msgid "Initial layer infill" #~ msgstr "Hasierako geruzaren betegarria" #~ msgid "Speed of solid infill part of initial layer." #~ msgstr "Hasierako geruzako betegarri solidoaren zatiaren abiadura." #~ msgid "Initial layer travel speed" #~ msgstr "Hasierako geruzaren mugimendu-abiadura" #~ msgid "Travel speed of initial layer." #~ msgstr "Hasierako geruzaren mugimendu-abiadura." #~ msgid "Initial layer nozzle temperature" #~ msgstr "Hasierako geruzaren pitaren tenperatura" #~ msgid "Nozzle temperature for printing initial layer when using this filament." #~ msgstr "Filamentu hau erabiltzean hasierako geruza inprimatzeko pitaren tenperatura." #~ msgid "Randomly jitter while printing the wall, so that the surface has a rough look. This setting controls the fuzzy position." #~ msgstr "Ausaz dardararazi horma inprimatzean, gainazalak itxura zimurra izan dezan. Ezarpen honek gainazal zimurraren posizioa kontrolatzen du." #~ msgid "The width within which to jitter. It's advised to be below outer wall line width." #~ msgstr "Dardara egiteko zabalera. Kanpoko hormaren lerro-zabaleratik behera egotea gomendatzen da." #~ msgid "" #~ "Noise type to use for fuzzy skin generation:\n" #~ "Classic: Classic uniform random noise.\n" #~ "Perlin: Perlin noise, which gives a more consistent texture.\n" #~ "Billow: Similar to perlin noise, but clumpier.\n" #~ "Ridged Multifractal: Ridged noise with sharp, jagged features. Creates marble-like textures.\n" #~ "Voronoi: Divides the surface into voronoi cells, and displaces each one by a random amount. Creates a patchwork texture." #~ msgstr "" #~ "Gainazal zimurra sortzeko erabiliko den zarata mota:\n" #~ "Klasikoa: ausazko zarata uniforme klasikoa.\n" #~ "Perlin: Perlin zarata, testura koherenteagoa ematen duena.\n" #~ "Ondulatua: Perlin zarataren antzekoa, baina multzokatuagoa.\n" #~ "Multifraktal Zimurra: ezaugarri zorrotz eta hautsiak dituen zarata ildaskatua.\n" #~ "Voronoi: gainazala Voronoi gelaxkatan banatzen du eta bakoitza ausaz desplazatzen du." #~ msgid "Speed of gap infill. Gap usually has irregular line width and should be printed more slowly." #~ msgstr "Hutsune-betegarriaren abiadura. Hutsuneek normalean lerro-zabalera irregularra izaten dute eta motelago inprimatu behar dira." #~ msgid "Enable this to get precise z height of object after slicing. It will get the precise object height by fine-tuning the layer heights of the last few layers. Note that this is an experimental parameter." #~ msgstr "Gaitu hau objektuaren Z altuera zehatza lortzeko xerratu ondoren. Objektuaren altuera zehatza lortuko du azken geruzen geruza-altuerak fin doituz. Kontuan izan parametro esperimentala dela." #~ msgid "Enable this to enable the camera on printer to check the quality of first layer." #~ msgstr "Gaitu hau inprimagailuko kamera aktibatzeko lehen geruzaren kalitatea egiaztatzeko." #~ msgid "The metallic material of nozzle. This determines the abrasive resistance of nozzle, and what kind of filament can be printed." #~ msgstr "Pitaren material metalikoa. Horrek pitaren urradurarekiko erresistentzia eta zer filamentu mota inprima daitekeen zehazten ditu." #~ msgid "Undefine" #~ msgstr "Definitu gabe" #~ msgid "The nozzle's hardness. Zero means no checking for nozzle's hardness during slicing." #~ msgstr "Pitaren gogortasuna. Zero balioak esan nahi du xerratzean ez dela pitaren gogortasuna egiaztatuko." #~ msgid "Support control chamber temperature" #~ msgstr "Ganberaren tenperatura kontrolatzea onartu" #~ msgid "Enable this to add comments into the G-code labeling print moves with what object they belong to, which is useful for the Octoprint CancelObject plugin. This settings is NOT compatible with Single Extruder Multi Material setup and Wipe into Object / Wipe into Infill." #~ msgstr "Gaitu hau G-codean iruzkinak gehitzeko, inprimatze-mugimenduak zein objekturi dagozkion etiketatuz; erabilgarria da Octoprint CancelObject pluginerako. Ezarpen hau EZ da bateragarria Estrusore bakarreko multimaterial konfigurazioarekin eta Objektuan garbitu / Betegarrian garbitu aukerekin." #~ msgid "Automatically Combine sparse infill of several layers to print together to reduce time. Wall is still printed with original layer height." #~ msgstr "Konbinatu automatikoki hainbat geruzatako dentsitate baxuko betegarria batera inprimatzeko eta denbora murrizteko. Horma jatorrizko geruza-altuerarekin inprimatzen da oraindik." #~ msgid "Filament to print internal sparse infill." #~ msgstr "Barneko dentsitate baxuko betegarria inprimatzeko filamentua." #~ msgid "Infill/Wall overlap" #~ msgstr "Betegarri/Horma gainjartzea" #, no-c-format, no-boost-format #~ msgid "Infill area is enlarged slightly to overlap with wall for better bonding. The percentage value is relative to line width of sparse infill. Set this value to ~10-15% to minimize potential over extrusion and accumulation of material resulting in rough top surfaces." #~ msgstr "Betegarri-eremua pixka bat handitzen da hormarekin gainjartzeko eta lotura hobetzeko. Portzentaje-balioa dentsitate baxuko betegarriaren lerro-zabalerarekiko da. Ezarri balio hau ~%10-15 inguruan, gainestrusio potentziala eta material-pilaketa minimizatzeko." #~ msgid "Speed of internal sparse infill." #~ msgstr "Barneko dentsitate baxuko betegarriaren abiadura." #~ msgid "Maximum width of a segmented region. Zero disables this feature." #~ msgstr "Eskualde segmentatu baten gehieneko zabalera. Zero balioak ezaugarri hau desgaitzen du." #~ msgid "Ironing Type" #~ msgstr "Lisatze mota" #~ msgid "Ironing is using small flow to print on same height of surface again to make flat surface more smooth. This setting controls which layer being ironed" #~ msgstr "Lisatzeak fluxu txikia erabiltzen du gainazalaren altuera berean berriro inprimatzeko, gainazal laua leunago egiteko. Ezarpen honek zein geruza lisatuko den kontrolatzen du" #~ msgid "Top surfaces" #~ msgstr "Goiko gainazalak" #~ msgid "Topmost surface" #~ msgstr "Goikoeneko gainazala" #~ msgid "All solid layer" #~ msgstr "Geruza solido guztiak" #~ msgid "The amount of material to extrude during ironing. Relative to flow of normal layer height. Too high value results in overextrusion on the surface." #~ msgstr "Lisatzean estruitu beharreko material kopurua. Geruza-altuera normalaren fluxuarekiko erlatiboa da. Balio handiegiek gainazalean gainestrusioa eragiten dute." #~ msgid "The distance between the lines of ironing." #~ msgstr "Lisatze-lerroen arteko distantzia." #~ msgid "Print speed of ironing lines." #~ msgstr "Lisatze-lerroen inprimatze-abiadura." #~ msgid "Ironing angle" #~ msgstr "Lisatze-angelua" #~ msgid "The angle ironing is done at. A negative number disables this function and uses the default method." #~ msgstr "Lisatzea zer angelutan egiten den. Zenbaki negatibo batek funtzio hau desgaitzen du eta metodo lehenetsia erabiltzen du." #~ msgid "Supports silent mode" #~ msgstr "Modu isila onartzen du" #~ msgid "Whether the machine supports silent mode in which machine use lower acceleration to print." #~ msgstr "Makinak modu isila onartzen duen; modu horretan makinak azelerazio txikiagoa erabiltzen du inprimatzeko." #~ msgid "Flow Compensation Model, used to adjust the flow for small infill areas. The model is expressed as a comma separated pair of values for extrusion length and flow correction factors, one per line, in the following format: \"1.234,5.678\"" #~ msgstr "Fluxu-konpentsazioaren modeloa, betegarri-eremu txikietarako fluxua doitzeko erabiltzen dena. Modeloa estrusio-luzeraren eta fluxu-zuzenketa faktoreen balio-pare gisa adierazten da, komaz bereizita eta lerro bakoitzeko bat, formatu honetan: \"1.234,5.678\"" #~ msgid "Part cooling fan speed may be increased when auto cooling is enabled. This is the maximum speed for the part cooling fan." #~ msgstr "Piezaren hozte-haizagailuaren abiadura handitu daiteke hozte automatikoa gaituta dagoenean. Hau da piezaren hozte-haizagailuaren gehieneko abiadura." #~ msgid "The highest printable layer height for the extruder. Used to limit the maximum layer height when adaptive layer height is enabled." #~ msgstr "Estrusorearentzat inprimatzeko moduko geruza-altuera handiena. Geruzaren altuera maximoa mugatzeko erabiltzen da, geruza-altuera egokigarria gaituta dagoenean." #~ msgid "The lowest printable layer height for the extruder. Used to limit the minimum layer height when adaptive layer height is enabled." #~ msgstr "Estrusorearen inprima daitekeen geruza-altuera txikiena. Geruza-altuera minimoa mugatzeko erabiltzen da geruza-altuera egokigarria gaituta dagoenean." #~ msgid "Diameter of nozzle" #~ msgstr "Pitaren diametroa" #~ msgid "Volume of nozzle between the cutter and the end of nozzle." #~ msgstr "Ebakitzailearen eta pitaren muturraren arteko pitaren bolumena." #~ msgid "The start and end points which is from cutter area to garbage can." #~ msgstr "Mozteko eremutik hondakin-ontzira doazen hasierako eta amaierako puntuak." #~ msgid "Don't retract when the travel is in infill area absolutely. That means the oozing can't been seen. This can reduce times of retraction for complex model and save printing time, but make slicing and G-code generating slower." #~ msgstr "Ez egin atzera-egiterik mugimendua guztiz betegarriaren eremuan dagoenean. Horrek esan nahi du jarioa ez dela ikusiko. Honek modelo konplexuetan atzera-egite kopurua murriztu eta inprimatze-denbora aurreztu dezake, baina xerraketa eta G-codearen sorrera motelduko ditu." #~ msgid "Users can define the project file name when exporting." #~ msgstr "Erabiltzaileek proiektu-fitxategiaren izena defini dezakete esportatzean." #~ msgid "Detect overhang wall" #~ msgstr "Detektatu gainegitura-horma" #, c-format, boost-format #~ msgid "Detect the overhang percentage relative to line width and use different speed to print. For 100%% overhang, bridge speed is used." #~ msgstr "Detektatu lerro-zabalerarekiko gainegite-portzentajea eta erabili abiadura desberdina inprimatzeko. %%100eko gainegitearen kasuan, zubia inprimatzeko abiadura erabiltzen da." #~ msgid "Filament to print walls" #~ msgstr "Hormak inprimatzeko filamentua" #~ msgid "Speed of inner wall." #~ msgstr "Barruko hormaren abiadura." #~ msgid "Number of walls of every layer." #~ msgstr "Geruza bakoitzeko horma kopurua." #~ msgid "Type of the printer" #~ msgstr "Inprimagailuaren mota" #~ msgid "Z gap between object and raft. Ignored for soluble interface." #~ msgstr "Objektuaren eta baltsaren arteko Z tartea. Interfaze disolbagarrian ez dakontuan hartzen." #~ msgid "Expand all raft layers in XY plane." #~ msgstr "Hedatu baltsaren geruza guztiak XY planoan." #~ msgid "Initial layer density" #~ msgstr "Hasierako geruzaren dentsitatea" #~ msgid "Density of the first raft or support layer." #~ msgstr "Baltsaren edo euskarriaren lehen geruzaren dentsitatea." #~ msgid "Initial layer expansion" #~ msgstr "Hasierako geruzaren hedapena" #~ msgid "Expand the first raft or support layer to improve bed plate adhesion." #~ msgstr "Hedatu baltsaren edo euskarriaren lehen geruza ohe-plakaren itsaspenahobetzeko." #~ msgid "The G-code path is generated after simplifying the contour of models to avoid too many points and G-code lines. Smaller value means higher resolution and more time to slice." #~ msgstr "G-codearen bidea modeloen ingerada sinplifikatu ondoren sortzen da, puntueta G-code lerro gehiegi saihesteko. Balio txikiagoak bereizmen handiagoa eta xerratzeko denbora gehiago esan nahi du." #~ msgid "The length of fast retraction before wipe, relative to retraction length." #~ msgstr "Garbitu aurreko atzera-egite azkarraren luzera, atzera-egitearen luzerarekiko." #~ msgid "Retract when change layer" #~ msgstr "Egin atzera geruza aldatzean" #~ msgid "Force a retraction when changes layer." #~ msgstr "Behartu atzera-egitea geruza aldatzean." #~ msgid "Retract on top layer" #~ msgstr "Egin atzera goiko geruzan" #~ msgid "Force a retraction on top layer. Disabling could prevent clog on very slow patterns with small movements, like Hilbert curve." #~ msgstr "Behartu atzera-egitea goiko geruzan. Desgaitzeak buxadurak saihes ditzake mugimendu txikiko patroi oso moteletan, Hilbert kurban adibidez." #~ msgid "Some amount of material in extruder is pulled back to avoid ooze during long travel. Set zero to disable retraction" #~ msgstr "Estrusorean dagoen material kantitate bat atzera eramaten da mugimendu luzeetan jarioa saihesteko. Ezarri zero atzera-egitea desgaitzeko" #~ msgid "Whenever the retraction is done, the nozzle is lifted a little to create clearance between nozzle and the print. It prevents nozzle from hitting the print when travel move. Using spiral lines to lift Z can prevent stringing." #~ msgstr "Atzera-egitea egiten denean, pita pixka bat altxatzen da pitaren eta inprimaketaren artean tartea sortzeko. Horrek saihesten du pitak inprimaketa jotzea mugimenduan. Z altxatzeko lerro espiralak erabiltzeak hariztatzea saihes dezake." #~ msgid "Retraction Speed" #~ msgstr "Atzera-egitearen abiadura" #~ msgid "Speed of retractions." #~ msgstr "Atzera-egiteen abiadura." #~ msgid "De-retraction Speed" #~ msgstr "Atzera-egitea lehengoratzeko abiadura" #~ msgid "Speed for reloading filament into extruder. Zero means same speed of retraction." #~ msgstr "Filamentua estrusorean berriro kargatzeko abiadura. Zero ezarrita, atzera-egitearen abiadura bera erabiliko da." #~ msgid "The start position to print each part of outer wall." #~ msgstr "Kanpoko hormaren zati bakoitza inprimatzeko hasierako posizioa." #~ msgid "Distance from skirt to brim or object" #~ msgstr "Gonatik itsaspen ertzera edo objekturainoko distantzia" #~ msgid "How many layers of skirt. Usually only one layer." #~ msgstr "Gonaren geruza kopurua. Normalean geruza bakarra izaten da." #~ msgid "Single loop draft shield" #~ msgstr "Begizta bakarreko aire-korronteen babeslea" #~ msgid "Limits the draft shield loops to one wall after the first layer. This is useful, on occasion, to conserve filament but may cause the draft shield to warp / crack." #~ msgstr "Lehen geruzaren ondoren aire-korronteen babeslearen begiztak horma batera mugatzen ditu. Batzuetan erabilgarria da filamentua aurrezteko, bainababeslea deformatzea edo pitzatzea eragin dezake." #~ msgid "Number of loops for the skirt. Zero means disabling skirt." #~ msgstr "Gonarako begizta kopurua. Zero ezarrita, gona desgaitzen da." #~ msgid "Sparse infill area which is smaller than threshold value is replaced by internal solid infill." #~ msgstr "Atalase-balioa baino txikiagoa den dentsitate baxuko betegarriaren eremua barne-betegarri solidoarekin ordeztuko da." #~ msgid "Solid infill" #~ msgstr "Betegarri solidoa" #~ msgid "Filament to print solid infill" #~ msgstr "Betegarri solidoa inprimatzeko filamentua" #~ msgid "Speed of internal solid infill, not the top and bottom surface." #~ msgstr "Barne-betegarri solidoaren abiadura, ez goiko eta beheko gainazalena." #~ msgid "Spiralize smooths out the z moves of the outer contour. And turns a solid model into a single walled print with solid bottom layers. The final generated model has no seam." #~ msgstr "Espiralizatzeak kanpoko ingeradaren Z mugimenduak leuntzen ditu, eta modelo solido bat horma bakarreko inprimaketa bihurtzen du, beheko geruza solidoekin. Sortutako azken modeloak ez du josturarik." #~ msgid "If smooth or traditional mode is selected, a timelapse video will be generated for each print. After each layer is printed, a snapshot is taken with the chamber camera. All of these snapshots are composed into a timelapse video when printing completes. If smooth mode is selected, the toolhead will move to the excess chute after each layer is printed and then take a snapshot. Since the melt filament may leak from the nozzle during the process of taking a snapshot, prime tower is required for smooth mode to wipe nozzle." #~ msgstr "Modu leuna edo tradizionala hautatzen bada, inprimaketa bakoitzeko timelapse bideo bat sortuko da. Geruza bakoitza inprimatu ondoren, argazki bat ateratzen da ganberako kamerarekin. Argazki horiek guztiak timelapse bideo batean biltzen dira inprimaketa amaitzean. Modu leuna hautatzen bada, tresna-burua soberakinen kanalera mugituko da geruza bakoitza inprimatu ondoren, eta ondoren argazkia aterako da. Argazkia ateratzeko prozesuan urtutako filamentua pitatik isuri daitekeenez, modu leunerako purgatze-dorrea behar da pita garbitzeko." #~ msgid "Start G-code when starting the entire print." #~ msgstr "Inprimaketa osoa hasteko hasierako G-codea." #~ msgid "Start G-code when starting the printing of this filament." #~ msgstr "Filamentu honen inprimaketa hasteko hasierako G-codea." #~ msgid "Enable filament ramming." #~ msgstr "Gaitu filamentua bultzatzea." #~ msgid "Enable support generation." #~ msgstr "Gaitu euskarrien sorrera." #~ msgid "Support/object xy distance" #~ msgstr "Euskarriaren/objektuaren XY distantzia" #~ msgid "XY separation between an object and its support." #~ msgstr "Objektu baten eta haren euskarriaren arteko XY bereizketa." #~ msgid "Don't create support on model surface, only on build plate." #~ msgstr "Ez sortu euskarririk modeloaren gainazalean; eraikitze-plakan bakarrik." #~ msgid "Remove small overhangs" #~ msgstr "Kendu gainegitura txikiak" #~ msgid "Remove small overhangs that possibly need no supports." #~ msgstr "Kendu agian euskarririk behar ez duten gainegitura txikiak." #~ msgid "The Z gap between the top support interface and object." #~ msgstr "Goiko euskarri-interfazearen eta objektuaren arteko Z tartea." #~ msgid "The Z gap between the bottom support interface and object." #~ msgstr "Beheko euskarri-interfazearen eta objektuaren arteko Z tartea." #~ msgid "Filament to print support base and raft. \"Default\" means no specific filament for support and current filament is used." #~ msgstr "Euskarriaren oinarria eta baltsa inprimatzeko filamentua. \"Lehenetsia\" aukerak esan nahi du ez dagoela filamenturik zehaztuta euskarrirako, eta uneko filamentua erabiltzen dela." #~ msgid "Interface use loop pattern" #~ msgstr "Interfazeak begizta-patroia erabiltzen du" #~ msgid "Cover the top contact layer of the supports with loops. Disabled by default." #~ msgstr "Estali euskarrien goiko kontaktu-geruza begiztekin. Lehenespenez desgaituta dago." #~ msgid "Filament to print support interface. \"Default\" means no specific filament for support interface and current filament is used." #~ msgstr "Euskarri-interfazea inprimatzeko filamentua. \"Lehenetsia\" aukerak esannahi du ez dagoela filamenturik zehaztuta euskarri-interfazerako, eta unekofilamentua erabiltzen dela." #~ msgid "Number of top interface layers." #~ msgstr "Goiko interfaze-geruza kopurua." #~ msgid "Spacing of interface lines. Zero means solid interface." #~ msgstr "Interfaze-lerroen arteko tartea. Zero ezarrita, interfaze solidoa erabiltzenda." #~ msgid "Spacing of bottom interface lines. Zero means solid interface." #~ msgstr "Beheko interfaze-lerroen arteko tartea. Zero ezarrita, interfaze solidoaerabiltzen da." #~ msgid "Speed of support interface." #~ msgstr "Euskarri-interfazearen abiadura." #~ msgid "Line pattern of support." #~ msgstr "Euskarriaren lerro-patroia." #~ msgid "Line pattern of support interface. Default pattern for non-soluble support interface is Rectilinear, while default pattern for soluble support interface is Concentric." #~ msgstr "Euskarri-interfazearen lerro-patroia. Euskarri-interfaze ez-disolbagarrirako patroi lehenetsia Lerrozuzena da; euskarri-interfaze disolbagarrirako,berriz, Kontzentrikoa." #~ msgid "Spacing between support lines." #~ msgstr "Euskarri-lerroen arteko tartea." #~ msgid "Normal Support expansion" #~ msgstr "Euskarri normalaren hedapena" #~ msgid "Speed of support." #~ msgstr "Euskarriaren abiadura." #~ msgid "Support layer uses layer height independent with object layer. This is to support customizing z-gap and save print time. This option will be invalid when the prime tower is enabled." #~ msgstr "Euskarri-geruzak objektuaren geruzarekiko independentea den geruza-altuera erabiltzen du. Horri esker Z tartea pertsonaliza daiteke eta inprimatze-denbora aurreztu. Aukera hau baliogabetu egingo da purgatze-dorrea gaituta badago." #~ msgid "Support will be generated for overhangs whose slope angle is below the threshold." #~ msgstr "Euskarria sortuko da malda-angelua atalasearen azpitik dutengainegituretarako." #~ msgid "Adaptive layer height" #~ msgstr "Geruza-altuera egokigarria" #~ msgid "Enabling this option means the height of tree support layer except the first will be automatically calculated." #~ msgstr "Aukera hau gaituz gero, lehenengoa izan ezik, zuhaitz-euskarriaren geruzen altuera automatikoki kalkulatuko da." #~ msgid "Nozzle temperature for layers after the initial one." #~ msgstr "Hasierakoaren ondorengo geruzetarako pitaren tenperatura." #~ msgid "Detect thin wall" #~ msgstr "Detektatu horma mehea" #~ msgid "Detect thin wall which can't contain two line width. And use single line to print. Maybe printed not very well, because it's not closed loop." #~ msgstr "Detektatu bi lerro-zabalera hartu ezin dituen horma mehea, eta erabili lerro bakarra inprimatzeko. Baliteke oso ondo ez inprimatzea, ez delako begizta itxia." #~ msgid "Speed of top surface infill which is solid." #~ msgstr "Goiko gainazaleko betegarri solidoaren abiadura." #~ msgid "This is the number of solid layers of top shell, including the top surface layer. When the thickness calculated by this value is thinner than top shell thickness, the top shell layers will be increased." #~ msgstr "Goiko oskolaren geruza solidoen kopurua da, goiko gainazaleko geruza barne. Balio honekin kalkulatutako lodiera goiko oskolaren lodiera baino meheagoa bada, goiko oskolaren geruzak handituko dira." #~ msgid "The number of top solid layers is increased when slicing if the thickness calculated by top shell layers is thinner than this value. This can avoid having too thin shell when layer height is small. 0 means that this setting is disabled and thickness of top shell is absolutely determined by top shell layers." #~ msgstr "Xerratzean goiko geruza solidoen kopurua handituko da, goiko oskolaren geruzekin kalkulatutako lodiera balio hau baino meheagoa bada. Horrela, geruza-altuera txikia denean oskola meheegia izatea saihestu daiteke. 0 balioak ezarpen hau desgaituta dagoela esan nahi du, eta goiko oskolaren lodiera goiko oskolaren geruzek bakarrik zehazten dutela." #~ msgid "Speed of travel which is faster and without extrusion." #~ msgstr "Estrusiorik gabeko mugimendu azkarraren abiadura." #~ msgid "Move nozzle along the last extrusion path when retracting to clean any leaked material on the nozzle. This can minimize blobs when printing a new part after traveling." #~ msgstr "Atzera egitean, mugitu pita azken estrusio-bidean zehar, pitatik isuritako materiala garbitzeko. Horrela, mugimenduaren ondoren pieza berri bat inprimatzean sortzen diren pikorrak murriztu daitezke." #~ msgid "Wipe Distance" #~ msgstr "Purgatze-distantzia" #~ msgid "The wiping tower can be used to clean up the residue on the nozzle and stabilize the chamber pressure inside the nozzle, in order to avoid appearance defects when printing objects." #~ msgstr "Purgatze-dorrea erabil daiteke pitaren hondarrak garbitzeko eta pitaren barruko ganbera-presioa egonkortzeko, objektuak inprimatzean itxura-akatsak saihesteko." #~ msgid "The actual flushing volumes is equal to the flush multiplier multiplied by the flushing volumes in the table." #~ msgstr "Benetako purgatze-bolumena purgatze-biderkatzailea taulakopurgatze-bolumenekin biderkatzearen emaitza da." #~ msgid "The volume of material to prime extruder on tower." #~ msgstr "Dorrean estrusorea primatzeko material-bolumena." #~ msgid "Width of the prime tower." #~ msgstr "Purgatze-dorrearen zabalera." #~ msgid "Wipe tower rotation angle with respect to x-axis." #~ msgstr "Purgatze-dorrearen biraketa-angelua X ardatzarekiko." #~ msgid "Purging after filament change will be done inside objects' infills. This may lower the amount of waste and decrease the print time. If the walls are printed with transparent filament, the mixed color infill will be seen outside. It will not take effect, unless the prime tower is enabled." #~ msgstr "Filamentu-aldaketaren ondorengo purga objektuen betegarriaren barruan egingo da. Horrek hondakin kopurua murriztu eta inprimatze-denbora laburtu dezake. Hormak filamentu gardenarekin inprimatzen badira, kolore nahasiko betegarria kanpotik ikusiko da. Ez du eraginik izango purgatze-dorrea gaituta ez badago." #~ msgid "Purging after filament change will be done inside objects' support. This may lower the amount of waste and decrease the print time. It will not take effect, unless the prime tower is enabled." #~ msgstr "Filamentu-aldaketaren ondorengo purga objektuen euskarrien barruan egingo da. Horrek hondakin kopurua murriztu eta inprimatze-denbora laburtu dezake. Ez du eraginik izango purgatze-dorrea gaituta ez badago." #~ msgid "Holes in objects will expand or contract in the XY plane by the configured value. Positive values make holes bigger, negative values make holes smaller. This function is used to adjust sizes slightly when the objects have assembling issues." #~ msgstr "Objektuetako zuloak XY planoan zabaldu edo uzkurtuko dira konfiguratutako balioaren arabera. Balio positiboek zuloak handiago egiten dituzte; balio negatiboek, txikiago. Funtzio hau neurriak pixka bat doitzeko erabiltzen da objektuek muntaketa-arazoak dituztenean." #~ msgid "Contours of objects will expand or contract in the XY plane by the configured value. Positive values make contours bigger, negative values make contours smaller. This function is used to adjust sizes slightly when the objects have assembling issues." #~ msgstr "Objektuen ingeradak XY planoan zabaldu edo uzkurtuko dira konfiguratutako balioaren arabera. Balio positiboek ingeradak handiago egiten dituzte; balio negatiboek, txikiago. Funtzio hau neurriak pixka bat doitzeko erabiltzen da objektuek muntaketa-arazoak dituztenean." #~ msgid "Classic wall generator produces walls with constant extrusion width and for very thin areas is used gap-fill. Arachne engine produces walls with variable extrusion width." #~ msgstr "Horma-sortzaile klasikoak estrusio-zabalera konstanteko hormak sortzen ditu, eta eremu oso meheetan hutsune-betetzea erabiltzen da. Arachne motorrak estrusio-zabalera aldakorreko hormak sortzen ditu." #~ msgid "Minimum thickness of thin features. Model features that are thinner than this value will not be printed, while features thicker than this value will be widened to the minimum wall width. It's expressed as a percentage over nozzle diameter." #~ msgstr "Ezaugarri meheen gutxieneko lodiera. Balio hau baino meheagoak diren modeloaren ezaugarriak ez dira inprimatuko; balio hau baino lodiagoak direnak, berriz, gutxieneko horma-zabalerara zabalduko dira. Pitaren diametroarekiko ehuneko gisa adierazten da." #~ msgid "Detect narrow internal solid infill" #~ msgstr "Detektatu barne-betegarri solido estua" #~ msgid "Export project as 3MF." #~ msgstr "Esportatu proiektua 3MF gisa." #~ msgid "Export slicing data to a folder." #~ msgstr "Esportatu xerratze-datuak karpeta batera." #~ msgid "Show command help." #~ msgstr "Erakutsi komandoaren laguntza." #~ msgid "Update the configs values of 3mf to latest." #~ msgstr "Eguneratu 3mf-ren konfigurazio-balioak azken bertsiora." #~ msgid "downward machines check" #~ msgstr "beheranzko makinen egiaztapena" #~ msgid "check whether current machine downward compatible with the machines in the list." #~ msgstr "egiaztatu uneko makina zerrendako makinekin beherantz bateragarria den." #~ msgid "export 3mf with minimum size." #~ msgstr "esportatu 3mf gutxieneko tamainarekin." #~ msgid "max triangle count per plate for slicing." #~ msgstr "xerratzeko plaka bakoitzeko gehieneko triangelu kopurua." #~ msgid "max slicing time per plate in seconds." #~ msgstr "plaka bakoitzeko gehieneko xerratze-denbora segundotan." #~ msgid "Output the model's information." #~ msgstr "Atera modeloaren informazioa." #~ msgid "Export settings to a file." #~ msgstr "Esportatu ezarpenak fitxategi batera." #~ msgid "Load uptodate process/machine settings when using uptodate." #~ msgstr "Kargatu prozesuaren/makinaren ezarpen eguneratuak uptodate erabiltzean." #~ msgid "Load uptodate process/machine settings from the specified file when using uptodate." #~ msgstr "Kargatu prozesuaren/makinaren ezarpen eguneratuak zehaztutako fitxategitik uptodate erabiltzean." #~ msgid "Load uptodate filament settings when using uptodate." #~ msgstr "Kargatu filamentu-ezarpen eguneratuak uptodate erabiltzean." #~ msgid "Output directory for the exported files." #~ msgstr "Esportatutako fitxategien irteerako direktorioa." #~ msgid "Load filament ids" #~ msgstr "Kargatu filamentu-IDak" #~ msgid "Load filament ids for each object" #~ msgstr "Kargatu objektu bakoitzaren filamentu-IDak" #~ msgid "Skip modified G-code in 3mf" #~ msgstr "Saltatu 3MFko G-code aldatua" #~ msgid "Skip the modified G-code in 3mf from Printer or filament Presets." #~ msgstr "Saltatu inprimagailuaren edo filamentuaren aurrezarpenetako 3MFko G-code aldatua." #~ msgid "MakerLab name to generate this 3mf" #~ msgstr "3MF hau sortzeko MakerLab izena" #~ msgid "MakerLab version to generate this 3mf" #~ msgstr "3MF hau sortzeko MakerLab bertsioa" #~ msgid "metadata name list" #~ msgstr "metadatuen izen-zerrenda" #~ msgid "metadata name list added into 3mf" #~ msgstr "3MFra gehitutako metadatuen izen-zerrenda" #~ msgid "metadata value list" #~ msgstr "metadatuen balio-zerrenda" #~ msgid "metadata value list added into 3mf" #~ msgstr "3MFra gehitutako metadatuen balio-zerrenda" #~ msgid "Allow 3mf with newer version to be sliced." #~ msgstr "Baimendu bertsio berriagoko 3MFak xerratzea." #~ msgid "" #~ "Contains a string with the information about what scaling was applied to the individual objects. Indexing of the objects is zero-based (first object has index 0).\n" #~ "Example: 'x:100% y:50% z:100'." #~ msgstr "" #~ "Objektu bakoitzari aplikatutako eskalari buruzko informazioa duen kate bat dauka. Objektuen indizeak zeroan oinarrituta daude (lehen objektuak 0 indizea du).\n" #~ "Adibidea: 'x:100% y:50% z:100'." #~ msgid "The vector has two elements: x and y coordinate of the point. Values in mm." #~ msgstr "Bektoreak bi elementu ditu: puntuaren x eta y koordenatuak. Balioak mm-tan." #~ msgid "The vector has two elements: x and y dimension of the bounding box. Values in mm." #~ msgstr "Bektoreak bi elementu ditu: muga-kutxaren x eta y dimentsioak. Balioak mm-tan." #~ msgid "Bottom-left corner of first layer bounding box" #~ msgstr "Lehen geruzaren muga-kutxaren behe-ezkerreko ertza" #~ msgid "Top-right corner of first layer bounding box" #~ msgstr "Lehen geruzaren muga-kutxaren goi-eskuineko ertza" #~ msgid "Layer z" #~ msgstr "Geruzaren Z" #~ msgid "Maximal layer z" #~ msgstr "Gehieneko geruza-Z" #~ msgid "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." #~ msgstr "Fitxategi-formatu ezezaguna. Sarrerako fitxategiak .stl, .obj edo .amf(.xml) luzapena izan behar du." #~ msgid "The supplied file couldn't be read because it's empty" #~ msgstr "Emandako fitxategia ezin izan da irakurri, hutsik dagoelako" #~ msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." #~ msgstr "Fitxategi-formatu ezezaguna. Sarrerako fitxategiak .3mf edo .zip.amf luzapena izan behar du." #~ msgid "How to use calibration result?" #~ msgstr "Nola erabili kalibrazioaren emaitza?" #~ msgid "Flow Rate" #~ msgstr "Fluxu" #, c-format, boost-format #~ msgid "" #~ "Please input valid values:\n" #~ "Start value: >= %.1f\n" #~ "End value: <= %.1f\n" #~ "End value: > Start value\n" #~ "Value step: >= %.3f)" #~ msgstr "" #~ "Sartu balio baliodunak:\n" #~ "Hasierako balioa: >= %.1f\n" #~ "Amaierako balioa: <= %.1f\n" #~ "Amaierako balioa: > Hasierako balioa\n" #~ "Balio-urratsa: >= %.3f)" #~ msgid "" #~ "This machine type can only hold 16 history results per nozzle. You can delete the existing historical results and then start calibration. Or you can continue the calibration, but you cannot create new calibration historical results.\n" #~ "Do you still want to continue the calibration?" #~ msgstr "" #~ "Makina mota honek pita bakoitzeko 16 emaitza historiko bakarrik gorde ditzake. Lehendik dauden emaitza historikoak ezabatu eta gero kalibrazioa has dezakezu. Edo kalibrazioarekin jarrai dezakezu, baina ezin izango duzu kalibrazio-emaitza historiko berririk sortu.\n" #~ "Hala ere kalibrazioarekin jarraitu nahi duzu?" #, c-format, boost-format #~ msgid "There is already a historical calibration result with the same name: %s. Only one of the results with the same name is saved. Are you sure you want to override the historical result?" #~ msgstr "Badago izen bereko kalibrazio-emaitza historiko bat: %s. Izen bereko emaitzetako bakarra gordeko da. Ziur emaitza historikoa gainidatzi nahi duzula?" #, c-format, boost-format #~ msgid "This machine type can only hold %d history results per nozzle. This result will not be saved." #~ msgstr "Makina mota honek pita bakoitzeko %d emaitza historiko bakarrik gorde ditzake. Emaitza hau ez da gordeko." #~ msgid "" #~ "We now have added the auto-calibration for different filaments, which is fully automated and the result will be saved into the printer for future use. You only need to do the calibration in the following limited cases:\n" #~ "1. If you introduce a new filament of different brands/models or the filament is damp\n" #~ "2. If the nozzle is worn out or replaced with a new one\n" #~ "3. If the max volumetric speed or print temperature is changed in the filament setting" #~ msgstr "" #~ "Orain filamentu desberdinetarako kalibrazio automatikoa gehitu dugu; guztiz automatikoa da, eta emaitza inprimagailuan gordeko da etorkizunean erabiltzeko. Kalibrazioa kasu mugatu hauetan bakarrik egin behar duzu:\n" #~ "1. Marka/modelo desberdineko filamentu berri bat erabiltzen baduzu edo filamentua heze badago\n" #~ "2. Pita higatuta badago edo berri batekin ordeztu bada\n" #~ "3. Filamentuaren ezarpenean gehieneko abiadura bolumetrikoa edo inprimatze-tenperatura aldatu bada" #~ msgid "" #~ "Auto Flow Rate Calibration utilizes Bambu Lab's Micro-Lidar technology, directly measuring the calibration patterns. However, please be advised that the efficacy and accuracy of this method may be compromised with specific types of materials. Particularly, filaments that are transparent or semi-transparent, sparkling-particled, or have a high-reflective finish may not be suitable for this calibration and can produce less-than-desirable results.\n" #~ "\n" #~ "The calibration results may vary between each calibration or filament. We are still improving the accuracy and compatibility of this calibration through firmware updates over time.\n" #~ "\n" #~ "Caution: Flow Rate Calibration is an advanced process, to be attempted only by those who fully understand its purpose and implications. Incorrect usage can lead to sub-par prints or printer damage. Please make sure to carefully read and understand the process before doing it." #~ msgstr "" #~ "Fluxuaren kalibrazio automatikoak Bambu Lab-en Micro-Lidar teknologia erabiltzen du, kalibrazio-patroiak zuzenean neurtuz. Hala ere, kontuan izan metodo honen eraginkortasuna eta zehaztasuna material mota jakin batzuekin murriztu daitezkeela. Bereziki, filamentu gardenak edo erdi gardenak, partikula distiratsuak dituztenak edo islatze handiko akabera dutenak agian ez dira egokiak kalibrazio honetarako, eta nahi baino emaitza txarragoak eman ditzakete.\n" #~ "\n" #~ "Kalibrazio-emaitzak aldatu egin daitezke kalibrazio edo filamentu bakoitzaren artean. Denborarekin, firmware-eguneraketen bidez kalibrazio honen zehaztasuna eta bateragarritasuna hobetzen jarraitzen dugu.\n" #~ "\n" #~ "Kontuz: fluxuaren kalibrazioa prozesu aurreratua da, haren helburua eta ondorioak guztiz ulertzen dituztenek bakarrik saiatu beharrekoa. Erabilera okerrak kalitate eskasagoko inprimaketak edo inprimagailuaren kalteak eragin ditzake. Ziurtatu prozesua arretaz irakurri eta ulertu duzula egin aurretik." #~ msgid "Only one of the results with the same name will be saved. Are you sure you want to overwrite the other results?" #~ msgstr "Izen bereko emaitzetako bakarra gordeko da. Ziur beste emaitzak gainidatzi nahi dituzula?" #~ msgid "Please find the corner with perfect degree of extrusion" #~ msgstr "Bilatu estrusio-maila perfektua duen izkina" #~ msgid "filament position" #~ msgstr "filamentuaren posizioa" #~ msgid "External Spool" #~ msgstr "Kanpoko bobina" #~ msgid "" #~ "Tips for calibration material: \n" #~ "- Materials that can share same hot bed temperature\n" #~ "- Different filament brand and family (Brand = Bambu, Family = Basic, Matte)" #~ msgstr "" #~ "Kalibrazio-materialerako aholkuak: \n" #~ "- Ohe beroaren tenperatura bera parteka dezaketen materialak\n" #~ "- Filamentu-marka eta familia desberdinak (Marka = Bambu, Familia = Basic, Matte)" #~ msgid "Connecting to printer" #~ msgstr "Inprimagailura konektatzen" #~ msgid "Refreshing the historical Flow Dynamics Calibration records" #~ msgstr "Fluxu-dinamikaren kalibrazioaren erregistro historikoak freskatzen" #, c-format, boost-format #~ msgid "This machine type can only hold %d history results per nozzle." #~ msgstr "Makina mota honek pita bakoitzeko %d emaitza historiko bakarrik gorde ditzake." #~ msgid "Ok" #~ msgstr "Ados" #~ msgid "" #~ "Please input valid values:\n" #~ "Start PA: >= 0.0\n" #~ "End PA: > Start PA\n" #~ "PA step: >= 0.001)" #~ msgstr "" #~ "Sartu balio baliozkoak:\n" #~ "Hasierako PA: >= 0.0\n" #~ "Amaierako PA: > Hasierako PA\n" #~ "PA urratsa: >= 0.001)" #~ msgid "" #~ "Please input valid values:\n" #~ "Start temp: <= 350\n" #~ "End temp: >= 170\n" #~ "Start temp > End temp + 5)" #~ msgstr "" #~ "Sartu balio baliozkoak:\n" #~ "Hasierako tenp.: <= 350\n" #~ "Amaierako tenp.: >= 170\n" #~ "Hasierako tenp. > Amaierako tenp. + 5)" #~ msgid "step: " #~ msgstr "urratsa: " #~ msgid "" #~ "Please input valid values:\n" #~ "start > 0 \n" #~ "step >= 0\n" #~ "end > start + step)" #~ msgstr "" #~ "Sartu balio baliozkoak:\n" #~ "hasiera > 0 \n" #~ "urratsa >= 0\n" #~ "amaiera > hasiera + urratsa)" #~ msgid "" #~ "Please input valid values:\n" #~ "start > 10 \n" #~ "step >= 0\n" #~ "end > start + step)" #~ msgstr "" #~ "Sartu balio baliozkoak:\n" #~ "hasiera > 10 \n" #~ "urratsa >= 0\n" #~ "amaiera > hasiera + urratsa)" #~ msgid "mm/mm" #~ msgstr "mm/mm" #~ msgid "Cancelling" #~ msgstr "Bertan behera uzten" #~ msgid "Vendor is not selected, please reselect vendor." #~ msgstr "Ez da fabrikatzailerik hautatu; hautatu berriro fabrikatzailea." #~ msgid "Custom vendor is not input, please input custom vendor." #~ msgstr "Ez da fabrikatzaile pertsonalizatua sartu; sartu fabrikatzaile pertsonalizatua." #~ msgid "Filament serial is not entered, please enter serial." #~ msgstr "Ez da filamentuaren seriea sartu; sartu seriea." #~ msgid "There may be escape characters in the vendor or serial input of filament. Please delete and re-enter." #~ msgstr "Baliteke ihes-karaktereak egotea filamentuaren fabrikatzailearen edo seriearen sarreran. Ezabatu eta sartu berriro." #~ msgid "The vendor cannot be a number. Please re-enter." #~ msgstr "Fabrikatzailea ezin da zenbaki bat izan. Sartu berriro." #, c-format, boost-format #~ msgid "" #~ "The Filament name %s you created already exists.\n" #~ "If you continue creating, the preset created will be displayed with its full name. Do you want to continue?" #~ msgstr "" #~ "Sortu duzun %s filamentu-izena dagoeneko existitzen da.\n" #~ "Sortzen jarraitzen baduzu, sortutako aurrezarpena izen osoarekin bistaratuko da. Jarraitu nahi duzu?" #~ msgid "The model was not found, please reselect vendor." #~ msgstr "Ez da modeloa aurkitu; hautatu berriro fabrikatzailea." #~ msgid "Load stl" #~ msgstr "Kargatu STL" #~ msgid "Load svg" #~ msgstr "Kargatu SVG" #~ msgid "Preset path was not found, please reselect vendor." #~ msgstr "Ez da aurrezarpenaren bidea aurkitu; hautatu berriro fabrikatzailea." #~ msgid "The nozzle diameter was not found, please reselect." #~ msgstr "Ez da pitaren diametroa aurkitu; hautatu berriro." #~ msgid "The printer preset was not found, please reselect." #~ msgstr "Ez da inprimagailu-aurrezarpena aurkitu; hautatu berriro." #~ msgid "Back Page 1" #~ msgstr "Itzuli 1. orrira" #~ msgid "You have entered an illegal input in the printable area section on the first page. Please check before creating it." #~ msgstr "Lehen orriko inprimatzeko eremuaren atalean sarrera baliogabea sartu duzu. Egiaztatu sortu aurretik." #~ msgid "The custom printer or model is not entered, please enter it." #~ msgstr "Ez da inprimagailu edo modelo pertsonalizatua sartu; sartu." #~ msgid "" #~ "The printer preset you created already has a preset with the same name. Do you want to overwrite it?\n" #~ "\tYes: Overwrite the printer preset with the same name, and filament and process presets with the same preset name will be recreated \n" #~ "and filament and process presets without the same preset name will be reserve.\n" #~ "\tCancel: Do not create a preset, return to the creation interface." #~ msgstr "" #~ "Sortu duzun inprimagailu-aurrezarpenak izen bereko aurrezarpen bat du dagoeneko. Gainidatzi nahi duzu?\n" #~ "\tBai: gainidatzi izen bereko inprimagailu-aurrezarpena, eta izen bereko filamentu- eta prozesu-aurrezarpenak berriro sortuko dira \n" #~ "eta izen berekoak ez diren filamentu- eta prozesu-aurrezarpenak gordeko dira.\n" #~ "\tUtzi: ez sortu aurrezarpenik eta itzuli sortzeko interfazera." #~ msgid "Vendor was not found, please reselect." #~ msgstr "Ez da fabrikatzailea aurkitu; hautatu berriro." #~ msgid "You have not selected the vendor and model or entered the custom vendor and model." #~ msgstr "Ez duzu fabrikatzailea eta modeloa hautatu, edo ez duzu fabrikatzaile eta modelo pertsonalizatua sartu." #~ msgid "You have not yet selected the printer to replace the nozzle, please choose." #~ msgstr "Oraindik ez duzu pita ordezteko inprimagailua hautatu; hautatu." #~ msgid "" #~ "Please go to filament setting to edit your presets if you need.\n" #~ "Please note that nozzle temperature, hot bed temperature, and maximum volumetric speed has a significant impact on printing quality. Please set them carefully." #~ msgstr "" #~ "Joan filamentuaren ezarpenetara aurrezarpenak editatzeko, behar baduzu.\n" #~ "Kontuan izan pitaren tenperaturak, ohe beroaren tenperaturak eta gehieneko abiadura bolumetrikoak eragin handia dutela inprimatze-kalitatean. Ezarri arretaz." #, c-format, boost-format #~ msgid "" #~ "The '%s' folder already exists in the current directory. Do you want to clear it and rebuild it.\n" #~ "If not, a time suffix will be added, and you can modify the name after creation." #~ msgstr "" #~ "\"%s\" karpeta dagoeneko existitzen da uneko direktorioan. Garbitu eta berreraiki nahi duzu?\n" #~ "Bestela, ordu-atzizki bat gehituko da, eta izena aldatu ahal izango duzu sortu ondoren." #~ msgid "" #~ "Printer and all the filament&&process presets that belongs to the printer.\n" #~ "Can be shared with others." #~ msgstr "" #~ "Inprimagailua eta inprimagailuari dagozkion filamentu- eta prozesu-aurrezarpen guztiak.\n" #~ "Besteekin parteka daiteke." #~ msgid "Only display printer names with changes to printer, filament, and process presets." #~ msgstr "Bistaratu soilik inprimagailu-, filamentu- eta prozesu-aurrezarpenetan aldaketak dituzten inprimagailu-izenak." #~ msgid "Please select a type you want to export" #~ msgstr "Hautatu esportatu nahi duzun mota" #~ msgid "Delete Filament" #~ msgstr "Ezabatu filamentua" #~ msgid "For more information, please check out Wiki" #~ msgstr "Informazio gehiagorako, begiratu Wikia" #, c-format, boost-format #~ msgid "nozzle memorized: %.1f %s" #~ msgstr "memorizatutako pita: %.1f %s" #~ msgid "Your nozzle diameter in preset is not consistent with memorized nozzle diameter. Did you change your nozzle lately?" #~ msgstr "Aurrezarpeneko pitaren diametroa ez dator bat memorizatutako pitaren diametroarekin. Azkenaldian pita aldatu duzu?" #, c-format, boost-format #~ msgid "*Printing %s material with %s may cause nozzle damage" #~ msgstr "*%s materiala %s-rekin inprimatzeak pita kaltetu dezake" #~ msgid "Refresh Printers" #~ msgstr "Freskatu inprimagailuak" #~ msgid "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height. This results in almost invisible layer lines and higher print quality but shorter print time." #~ msgstr "0,2 mm-ko pitaren profil lehenetsiarekin alderatuta, geruza-altuera txikiagoa du. Horren ondorioz, geruza-lerroak ia ikusezinak dira eta inprimatze-kalitatea handiagoa, baina inprimatze-denbora laburragoa." #~ msgid "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height. This results in minimal layer lines and higher print quality, but shorter print time." #~ msgstr "0,2 mm-ko pitaren profil lehenetsiarekin alderatuta, geruza-altuera txikiagoa du. Horren ondorioz, geruza-lerroak minimoak dira eta inprimatze-kalitatea handiagoa, baina inprimatze-denbora laburragoa." #~ msgid "It has a very big layer height. This results in very apparent layer lines, low print quality and general print time." #~ msgstr "Geruza-altuera oso handia du. Horren ondorioz, geruza-lerroak oso nabariak dira, inprimatze-kalitatea txikia da eta inprimatze-denbora arrunta." #~ msgid "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height. This results in very apparent layer lines and much lower print quality but shorter print time in some cases." #~ msgstr "0,8 mm-ko pitaren profil lehenetsiarekin alderatuta, geruza-altuera handiagoa du. Horren ondorioz, geruza-lerroak oso nabariak dira eta inprimatze-kalitatea askoz txikiagoa, baina kasu batzuetan inprimatze-denbora laburragoa." #~ msgid "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger layer height. This results in extremely apparent layer lines and much lower print quality but much shorter print time in some cases." #~ msgstr "0,8 mm-ko pitaren profil lehenetsiarekin alderatuta, geruza-altuera askoz handiagoa du. Horren ondorioz, geruza-lerroak izugarri nabariak dira eta inprimatze-kalitatea askoz txikiagoa, baina kasu batzuetan inprimatze-denbora askoz laburragoa." #~ msgid "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer height. This results in less but still apparent layer lines and slightly higher print quality, but longer print time in some cases." #~ msgstr "0,8 mm-ko pitaren profil lehenetsiarekin alderatuta, geruza-altuera txikiagoa du. Horren ondorioz, geruza-lerroak gutxiago baina oraindik nabariak dira, eta inprimatze-kalitatea pixka bat handiagoa, baina kasu batzuetan inprimatze-denbora luzeagoa." #~ msgid "Connection to Flashforge is working correctly." #~ msgstr "Flashforge-rako konexioak ondo funtzionatzen du." #~ msgid "Could not connect to Flashforge" #~ msgstr "Ezin izan da Flashforge-ra konektatu" #~ msgid "Remove selected points" #~ msgstr "Kendu hautatutako puntuak" #~ msgid "Remove all" #~ msgstr "Kendu dena" #~ msgid "Auto-generate points" #~ msgstr "Sortu puntuak automatikoki" #~ msgid "Add a brim ear" #~ msgstr "Gehitu ertz-belarria" #~ msgid "Delete a brim ear" #~ msgstr "Ezabatu ertz-belarria" #~ msgid "Adjust section view" #~ msgstr "Doitu sekzio-ikuspegia" #~ msgid "Set the brim type to \"painted\"" #~ msgstr "Ezarri itsaspen ertz mota \"margotua\" gisa" #~ msgid " invalid brim ears" #~ msgstr " ertz-belarri baliogabeak" #~ msgid "" #~ "Reverse on odd\n" #~ "Did you know that Reverse on odd feature can significantly improve the surface quality of your overhangs?" #~ msgstr "" #~ "Alderantzikatu bakoitietan\n" #~ "Ba al zenekien Alderantzikatu bakoitietan funtzioak gainzintzilikatzeen gainazal-kalitatea nabarmen hobetu dezakeela?" #~ msgid "" #~ "Speed up your print with Adaptive Layer Height\n" #~ "Did you know that you can print a model even faster, by using the Adaptive Layer Height option? Check it out!" #~ msgstr "" #~ "Bizkortu zure inprimaketa Geruza-Altuera Egokigarriarekin\n" #~ "Bazenekien modelo bat are bizkorrago inprima dezakezula, Geruza-altuera Egokigarria aukeraren bidez? Egiazta ezazu!" #~ msgid "" #~ "Different types of supports\n" #~ "Did you know that you can choose from multiple types of supports? Tree supports work great for organic models, while saving filament and improving print speed. Check them out!" #~ msgstr "" #~ "Euskarri mota desberdinak\n" #~ "Ba al zenekien euskarri mota bat baino gehiago aukera ditzakezula? Zuhaitz-euskarriek oso ondo funtzionatzen dute modelo organikoetan, filamentua aurreztuz eta inprimatze-abiadura hobetuz. Begiratu!" #~ msgid "" #~ "Printing Silk Filament\n" #~ "Did you know that Silk filament needs special consideration to print it successfully? Higher temperature and lower speed are always recommended for the best results." #~ msgstr "" #~ "Zeta filamentua inprimatzea\n" #~ "Ba al zenekien zeta filamentuak arreta berezia behar duela ondo inprimatzeko? Emaitza onenak lortzeko, tenperatura handiagoa eta abiadura txikiagoa gomendatzen dira beti." #~ msgid "" #~ "Flush into support/objects/infill\n" #~ "Did you know that you can save wasted filament by flushing it into support/objects/infill during filament change?" #~ msgstr "" #~ "Purgatu euskarrietara/objektuetara/betegarrira\n" #~ "Ba al zenekien filamentu-aldaketan xahututako filamentua aurreztu dezakezula euskarrietara, objektuetara edo betegarrira purgatuz?" #~ msgid "" #~ "When do you need to print with the printer door opened?\n" #~ "Did you know that opening the printer door can reduce the probability of extruder/hotend clogging when printing lower temperature filament with a higher enclosure temperature? More info about this in the Wiki." #~ msgstr "" #~ "Noiz inprimatu behar da inprimagailuaren atea irekita?\n" #~ "Ba al zenekien inprimagailuaren atea irekitzeak estrusorea/hotend-a buxatzeko probabilitatea murriztu dezakeela tenperatura baxuagoko filamentua itxituraren tenperatura handiagoarekin inprimatzean? Informazio gehiago Wikian."