{
	"type": "machine",
	"name": "fdm_machine_meltingplot_chx",
	"inherits": "fdm_machine_common",
	"from": "system",
	"instantiation": "false",
	"fan_kickstart": "0.5",
	"fan_speedup_time": "1",
	"machine_max_acceleration_e": [
		"3000"
	],
	"machine_max_acceleration_extruding": [
		"6000"
	],
	"machine_max_acceleration_retracting": [
		"3000"
	],
	"machine_max_acceleration_travel": [
		"6000"
	],
	"machine_max_acceleration_x": [
		"6000"
	],
	"machine_max_acceleration_y": [
		"6000"
	],
	"machine_max_acceleration_z": [
		"400"
	],
	"machine_max_jerk_e": [
		"33.33"
	],
	"machine_max_jerk_x": [
		"12"
	],
	"machine_max_jerk_y": [
		"12"
	],
	"machine_max_jerk_z": [
		"1.2"
	],
	"machine_max_speed_x": [
		"833.33"
	],
	"machine_max_speed_y": [
		"1000"
	],
	"machine_max_speed_z": [
		"30"
	],
	"extruder_clearance_radius": "65",
	"extruder_clearance_height_to_rod": "20",
	"extruder_clearance_height_to_lid": "150",
	"nozzle_type": [
		"stainless_steel"
	],
	"min_resonance_avoidance_speed": "40",
	"max_resonance_avoidance_speed": "105",
	"time_cost": "5",
	"retraction_minimum_travel": [
		"2"
	],
	"retraction_speed": [
		"60"
	],
	"deretraction_speed": [
		"40"
	],
	"printable_height": "943",
	"machine_start_gcode": "M140 P0 S{first_layer_bed_temperature[0]} ; set bed temp\nG10 P0 S{first_layer_temperature[0]}\nM568 P0 R{first_layer_temperature[0] + standby_temperature_delta} S{first_layer_temperature[0]} A2\n\nM83 ; use relative distances for extrusion\nG90 ; use absolute coordinates\n\nM98 P\"0:/sys/meltingplot/print_start\""
}