{
	"type": "process",
	"name": "0.18 Standard @Snapmaker U1 (0.6 nozzle)",
	"inherits": "fdm_process_U1_0.18_nozzle_0.6",
	"from": "system",
	"setting_id": "XGSrVgnsUFv6uCRs",
	"instantiation": "true",
	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
	"elefant_foot_compensation": "0.15",
	"smooth_coefficient": "150",
	"overhang_totally_speed": "50",
	"compatible_printers": [
		"Snapmaker U1 (0.6 nozzle)"
	],
	"filter_out_gap_fill": "1",
	"gap_fill_target": "topbottom",
	"internal_bridge_speed": "100%",
	"layer_height": "0.25",
	"prime_tower_brim_width": "5",
	"prime_tower_width": "30",
	"prime_volume": "41",
	"seam_gap": "15%",
	"wipe_tower_extra_rib_length": "8",
	"wipe_tower_extra_spacing": "120%",
	"wipe_tower_wall_type": "rib",
	"enable_arc_fitting": "0",
	"ooze_prevention": "1",
	"precise_outer_wall": "1",
	"slowdown_for_curled_perimeters": "0",
	"standby_temperature_delta": "-150",
	"support_type": "tree(auto)"
}