{
	"type": "filament",
	"name": "Snapmaker TPU 90A @U1",
	"inherits": "fdm_filament_tpu",
	"from": "system",
	"setting_id": "T4MmgICRrSzvmCZ5",
	"filament_id": "GFU99",
	"instantiation": "true",
	"filament_max_volumetric_speed": [
		"3.2"
	],
	"compatible_printers": [
		"Snapmaker U1 (0.4 nozzle)"
	],
	"filament_start_gcode": [
		"; filament start gcode\n"
	],
	"filament_end_gcode": [
		"; filament end gcode \n\n"
	],
	"filament_multitool_ramming": [
		"1"
	],
	"filament_multitool_ramming_volume": [
		"0.1"
	],
	"pressure_advance": [
		"0.4"
	],
	"additional_cooling_fan_speed": [
		"100"
	],
	"complete_print_exhaust_fan_speed": [
		"100"
	],
	"during_print_exhaust_fan_speed": [
		"100"
	],
	"enable_pressure_advance": [
		"0"
	],
	"filament_deretraction_speed": [
		"15"
	],
	"filament_flow_ratio": [
		"1.045"
	],
	"filament_multitool_ramming_flow": [
		"5"
	],
	"filament_retract_length_toolchange": [
		"2"
	],
	"filament_retraction_length": [
		"1.2"
	],
	"filament_retraction_speed": [
		"15"
	],
	"filament_vendor": [
		"Snapmaker"
	],
	"nozzle_temperature": [
		"230"
	],
	"nozzle_temperature_initial_layer": [
		"230"
	],
	"slow_down_layer_time": [
		"14"
	],
	"activate_air_filtration": [
		"0"
	],
	"chamber_temperatures": [
		"0"
	],
	"cool_plate_temp": [
		"30"
	],
	"cool_plate_temp_initial_layer": [
		"30"
	],
	"eng_plate_temp": [
		"30"
	],
	"eng_plate_temp_initial_layer": [
		"30"
	],
	"fan_max_speed": [
		"100"
	],
	"fan_min_speed": [
		"100"
	],
	"filament_cost": [
		"20"
	],
	"filament_long_retractions_when_cut": [
		"nil"
	],
	"filament_minimal_purge_on_wipe_tower": [
		"15"
	],
	"filament_retract_when_changing_layer": [
		"nil"
	],
	"filament_retraction_distances_when_cut": [
		"nil"
	],
	"filament_z_hop": [
		"nil"
	],
	"filament_z_hop_types": [
		"nil"
	],
	"hot_plate_temp": [
		"35"
	],
	"hot_plate_temp_initial_layer": [
		"35"
	],
	"overhang_fan_speed": [
		"100"
	],
	"slow_down_for_layer_cooling": [
		"1"
	],
	"temperature_vitrification": [
		"30"
	],
	"textured_plate_temp": [
		"35"
	],
	"textured_plate_temp_initial_layer": [
		"35"
	],
	"nozzle_temperature_range_low": [
		"200"
	]
}