{
	"type": "filament",
	"name": "Bambu PETG-CF @BBL H2C",
	"inherits": "Bambu PETG-CF @base",
	"from": "system",
	"setting_id": "GFSG50_18",
	"instantiation": "true",
	"counter_coef_2": [
		"0.0022"
	],
	"counter_coef_3": [
		"-0.0178"
	],
	"counter_limit_max": [
		"0.036"
	],
	"counter_limit_min": [
		"-0.0178"
	],
	"fan_cooling_layer_time": [
		"30"
	],
	"fan_max_speed": [
		"40"
	],
	"fan_min_speed": [
		"5"
	],
	"filament_change_length": [
		"4"
	],
	"filament_cooling_before_tower": [
		"10",
		"10"
	],
	"filament_max_volumetric_speed": [
		"11.5",
		"11.5"
	],
	"filament_pre_cooling_temperature_nc": [
		"215",
		"215"
	],
	"filament_prime_volume": [
		"30"
	],
	"filament_prime_volume_nc": [
		"30"
	],
	"filament_ramming_travel_time": [
		"0",
		"0"
	],
	"filament_ramming_travel_time_nc": [
		"1",
		"1"
	],
	"first_x_layer_fan_speed": [
		"0"
	],
	"filament_change_length_nc": [
		"4"
	],
	"hole_coef_2": [
		"-0.0014"
	],
	"hole_coef_3": [
		"0.11"
	],
	"hole_limit_max": [
		"0.11"
	],
	"hole_limit_min": [
		"0.075"
	],
	"filament_preheat_temperature_delta": [
		"20",
		"20"
	],
	"filament_adaptive_volumetric_speed": [
		"0",
		"0"
	],
	"filament_deretraction_speed": [
		"nil",
		"nil"
	],
	"filament_extruder_variant": [
		"Direct Drive Standard",
		"Direct Drive High Flow"
	],
	"filament_flush_temp": [
		"0",
		"0"
	],
	"filament_flush_volumetric_speed": [
		"0",
		"0"
	],
	"filament_flow_ratio": [
		"0.95",
		"0.95"
	],
	"filament_long_retractions_when_cut": [
		"nil",
		"nil"
	],
	"filament_pre_cooling_temperature": [
		"0",
		"0"
	],
	"filament_retract_length_nc": [
		"14",
		"14"
	],
	"filament_ramming_volumetric_speed": [
		"-1",
		"-1"
	],
	"filament_ramming_volumetric_speed_nc": [
		"-1",
		"-1"
	],
	"filament_retract_before_wipe": [
		"nil",
		"nil"
	],
	"filament_retract_restart_extra": [
		"nil",
		"nil"
	],
	"filament_retract_when_changing_layer": [
		"nil",
		"nil"
	],
	"filament_retraction_distances_when_cut": [
		"nil",
		"nil"
	],
	"filament_retraction_length": [
		"nil",
		"nil"
	],
	"filament_retraction_minimum_travel": [
		"nil",
		"nil"
	],
	"filament_retraction_speed": [
		"nil",
		"nil"
	],
	"filament_wipe": [
		"nil",
		"nil"
	],
	"filament_wipe_distance": [
		"nil",
		"nil"
	],
	"filament_z_hop": [
		"nil",
		"nil"
	],
	"filament_z_hop_types": [
		"nil",
		"nil"
	],
	"long_retractions_when_ec": [
		"1",
		"1"
	],
	"retraction_distances_when_ec": [
		"10",
		"10"
	],
	"slow_down_min_speed": [
		"10",
		"10"
	],
	"volumetric_speed_coefficients": [
		"0 0 0 0 0 0",
		"0 0 0 0 0 0"
	],
	"nozzle_temperature": [
		"255",
		"255"
	],
	"nozzle_temperature_initial_layer": [
		"255",
		"255"
	],
	"overhang_fan_speed": [
		"100"
	],
	"supertack_plate_temp": [
		"60"
	],
	"supertack_plate_temp_initial_layer": [
		"60"
	],
	"temperature_vitrification": [
		"55"
	],
	"compatible_printers": [
		"Bambu Lab H2C 0.6 nozzle",
		"Bambu Lab H2C 0.8 nozzle"
	],
	"filament_start_gcode": [
		"; filament start gcode\n"
	],
	"filament_end_gcode": [
		"; filament end gcode \n"
	]
}