{
    "type": "filament",
    "name": "Soleyin Basic PETG @K2 Pro-all",
    "inherits": "fdm_filament_petg",
    "from": "system",
    "setting_id": "vI7ThHCwOBfts0NQ",
    "instantiation": "true",
    "complete_print_exhaust_fan_speed": [
        "0"
    ],
    "cool_plate_temp": [
        "70"
    ],
    "cool_plate_temp_initial_layer": [
        "70"
    ],
    "during_print_exhaust_fan_speed": [
        "0"
    ],
    "eng_plate_temp": [
        "70"
    ],
    "eng_plate_temp_initial_layer": [
        "70"
    ],
    "fan_cooling_layer_time": [
        "30"
    ],
    "fan_max_speed": [
        "80"
    ],
    "fan_min_speed": [
        "40"
    ],
    "filament_cost": [
        "15.9"
    ],
    "filament_density": [
        "1.25"
    ],
    "filament_deretraction_speed": [
        "40"
    ],
    "filament_flow_ratio": [
        "0.95"
    ],
    "filament_max_volumetric_speed": [
        "16"
    ],
    "filament_retract_before_wipe": [
        "90%"
    ],
    "filament_retraction_minimum_travel": [
        "1"
    ],
    "filament_retraction_speed": [
        "40"
    ],
    "filament_type": [
        "PETG"
    ],
    "filament_vendor": [
        "Creality"
    ],
    "filament_wipe_distance": [
        "2"
    ],
    "filament_z_hop_types": [
        "Slope Lift"
    ],
    "hot_plate_temp": [
        "70"
    ],
    "hot_plate_temp_initial_layer": [
        "70"
    ],
    "nozzle_temperature": [
        "250"
    ],
    "nozzle_temperature_initial_layer": [
        "250"
    ],
    "nozzle_temperature_range_high": [
        "250"
    ],
    "nozzle_temperature_range_low": [
        "230"
    ],
    "overhang_fan_speed": [
        "80"
    ],
    "overhang_fan_threshold": [
        "25%"
    ],
    "reduce_fan_stop_start_freq": [
        "1"
    ],
    "slow_down_layer_time": [
        "12"
    ],
    "slow_down_min_speed": [
        "20"
    ],
    "temperature_vitrification": [
        "80"
    ],
    "textured_plate_temp": [
        "70"
    ],
    "textured_plate_temp_initial_layer": [
        "70"
    ],
    "activate_chamber_temp_control": "1",
    "chamber_temperature": "35",
    "customized_plate_temp": "70",
    "customized_plate_temp_initial_layer": "70",
    "enable_pressure_advance": "0",
    "epoxy_resin_plate_temp": "60",
    "epoxy_resin_plate_temp_initial_layer": "60",
    "filament_retract_lift_above": "nil",
    "filament_retract_lift_below": "nil",
    "filament_retract_lift_enforce": "nil",
    "material_flow_temp_graph": "[[0.5,220],[1.2,220],[1.2,250]]",
    "pressure_advance": "0.08",
    "default_filament_colour": "\"\"",
    "compatible_printers": [
        "Creality K2 Pro 0.4 nozzle",
        "Creality K2 Pro 0.6 nozzle",
        "Creality K2 Pro 0.8 nozzle"
    ],
    "filament_id": "06005"
}