# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2026-07-29 17:40-0300\n" "PO-Revision-Date: 2026-07-02 14:13+0300\n" "Last-Translator: Gintaras Kučinskas \n" "Language-Team: \n" "Language: lt_LT\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=(n%10==1 && (n%100<11 || n%100>19) ? 0 : n%10>=2 && n%10<=9 && (n%100<11 || n%100>19) ? 1 : 2);\n" "X-Generator: Poedit 3.6\n" # AI Translated msgid "Main Extruder" msgstr "Pagrindinis ekstruderis" # AI Translated msgid "Main extruder" msgstr "Pagrindinis ekstruderis" # AI Translated msgid "main extruder" msgstr "pagrindinis ekstruderis" # AI Translated msgid "Auxiliary Extruder" msgstr "Papildomas ekstruderis" # AI Translated msgid "Auxiliary extruder" msgstr "Papildomas ekstruderis" # AI Translated msgid "auxiliary extruder" msgstr "papildomas ekstruderis" msgid "Left Extruder" msgstr "Kairysis ekstruderis" msgid "Left extruder" msgstr "Kairysis ekstruderis" msgid "left extruder" msgstr "kairysis ekstruderis" msgid "Right Extruder" msgstr "Dešinysis ekstruderis" msgid "Right extruder" msgstr "Dešinysis ekstruderis" msgid "right extruder" msgstr "dešinysis ekstruderis" # AI Translated msgid "Main Nozzle" msgstr "Pagrindinis purkštukas" # AI Translated msgid "Main nozzle" msgstr "Pagrindinis purkštukas" # AI Translated msgid "main nozzle" msgstr "pagrindinis purkštukas" # AI Translated msgid "Auxiliary Nozzle" msgstr "Papildomas purkštukas" # AI Translated msgid "Auxiliary nozzle" msgstr "Papildomas purkštukas" # AI Translated msgid "auxiliary nozzle" msgstr "papildomas purkštukas" msgid "Left Nozzle" msgstr "Kairysis purkštukas" msgid "Left nozzle" msgstr "Kairysis purkštukas" msgid "left nozzle" msgstr "kairysis purkštukas" msgid "Right Nozzle" msgstr "Dešinysis purkštukas" msgid "Right nozzle" msgstr "Dešinysis purkštukas" msgid "right nozzle" msgstr "dešinysis purkštukas" # AI Translated msgid "Main Hotend" msgstr "Pagrindinis kaitinimo blokas" # AI Translated msgid "Main hotend" msgstr "Pagrindinis kaitinimo blokas" # AI Translated msgid "main hotend" msgstr "pagrindinis kaitinimo blokas" # AI Translated msgid "Auxiliary Hotend" msgstr "Papildomas kaitinimo blokas" # AI Translated msgid "Auxiliary hotend" msgstr "Papildomas kaitinimo blokas" # AI Translated msgid "auxiliary hotend" msgstr "papildomas kaitinimo blokas" # AI Translated msgid "Left Hotend" msgstr "Kairysis kaitinimo blokas" # AI Translated msgid "Left hotend" msgstr "Kairysis kaitinimo blokas" # AI Translated msgid "left hotend" msgstr "kairysis kaitinimo blokas" # AI Translated msgid "Right Hotend" msgstr "Dešinysis kaitinimo blokas" # AI Translated msgid "Right hotend" msgstr "Dešinysis kaitinimo blokas" # AI Translated msgid "right hotend" msgstr "dešinysis kaitinimo blokas" # AI Translated msgid "main" msgstr "pagrindinis" # AI Translated msgid "auxiliary" msgstr "papildomas" # AI Translated msgid "Main" msgstr "Pagrindinis" # AI Translated msgid "Auxiliary" msgstr "Papildomas" msgid "left" msgstr "kairė" msgid "right" msgstr "dešinė" msgid "Left" msgstr "Kairė" msgid "Right" msgstr "Dešinė" msgid "extruder" msgstr "ekstruderis" msgid "TPU is not supported by AMS." msgstr "AMS nepalaiko TPU." msgid "AMS does not support 'Bambu Lab PET-CF'." msgstr "AMS nepalaiko „Bambu Lab PET-CF“." # AI Translated msgid "The current filament doesn't support the E3D high-flow nozzle and can't be used." msgstr "Dabartinė gija nepalaiko E3D didelio srauto purkštuko ir negali būti naudojama." # AI Translated msgid "The current filament doesn't support the TPU high-flow nozzle and can't be used." msgstr "Dabartinė gija nepalaiko TPU didelio srauto purkštuko ir negali būti naudojama." # AI Translated msgid "Auto dynamic flow calibration is not supported for TPU filament." msgstr "Automatinis dinaminis srauto kalibravimas nepalaikomas TPU gijai." # AI Translated msgid "Bambu TPU 85A is not supported for printing with 0.4 mm Standard or High Flow nozzles." msgstr "Bambu TPU 85A nepalaikomas spausdinant su 0,4 mm standartinio arba didelio srauto purkštukais." # AI Translated msgid "How to feed TPU filament." msgstr "Kaip tiekti TPU giją." # AI Translated msgid "How to feed TPU filament on X2D." msgstr "Kaip tiekti TPU giją įrenginyje X2D." msgid "Please cold pull before printing TPU to avoid clogging. You may use cold pull maintenance on the printer." msgstr "Prieš spausdindami TPU, atlikite valymą traukiant atvėsusią giją („cold pull“), kad išvengtumėte užsikimšimo. Galite naudoti spausdintuvo techninės priežiūros funkciją." msgid "Damp PVA will become flexible and get stuck inside AMS, please take care to dry it before use." msgstr "Drėgnas PVA taps lankstus ir gali įstrigti AMS. Prieš naudojimą būtinai jį išdžiovinkite." msgid "Damp PVA is flexible and may get stuck in extruder. Dry it before use." msgstr "Drėgnas PVA yra lankstus ir gali įstrigti ekstruderyje. Prieš naudojimą jį išdžiovinkite." msgid "The rough surface of PLA Glow can accelerate wear on the AMS system, particularly on the internal components of the AMS Lite." msgstr "Šiurkštus „PLA Glow“ paviršius gali pagreitinti AMS sistemos, ypač „AMS Lite“ vidinių komponentų, nusidėvėjimą." # AI Translated msgid "PLA Glow may wear the AMS first stage feeder. Use an external spool instead." msgstr "PLA Glow gali nudėvėti pirmąją AMS tiekimo pakopą. Vietoj to naudokite išorinę ritę." msgid "CF/GF filaments are hard and brittle, it's easy to break or get stuck in AMS, please use with caution." msgstr "Pastaba: CF/GF gijos yra kietos ir trapios. Jas lengva nulaužti arba jos gali įstrigti AMS. Naudokite atsargiai." msgid "PPS-CF is brittle and could break in bended PTFE tube above Toolhead." msgstr "PPS-CF yra trapus ir gali lūžti sulenktoje PTFE tūtelėje virš spausdinimo galvutės." msgid "PPA-CF is brittle and could break in bended PTFE tube above Toolhead." msgstr "PPA-CF yra trapus ir gali lūžti sulenktoje PTFE tūtelėje virš spausdinimo galvutės." # AI Translated msgid "Default settings may affect print quality. Adjust as needed for best results." msgstr "Numatytieji nustatymai gali paveikti spausdinimo kokybę. Prireikus pakoreguokite, kad gautumėte geriausią rezultatą." # AI Translated #, c-format, boost-format msgid "%s has a risk of nozzle clogging when using 0.4mm high-flow nozzles. Use with caution." msgstr "%s kelia purkštuko užsikimšimo riziką naudojant 0,4 mm didelio srauto purkštukus. Naudokite atsargiai." # AI Translated #, c-format, boost-format msgid "%s filaments are hard and brittle and could break in AMS, and there is also a risk of nozzle clogging when using 0.4mm high-flow nozzles. Use with caution." msgstr "%s gijos yra kietos ir trapios, gali lūžti AMS, be to, kyla purkštuko užsikimšimo rizika naudojant 0,4 mm didelio srauto purkštukus. Naudokite atsargiai." # AI Translated #, c-format, boost-format msgid "%s has a risk of nozzle clogging when using 0.4, 0.6, 0.8mm high-flow nozzles. Use with caution." msgstr "%s kelia purkštuko užsikimšimo riziką naudojant 0,4, 0,6, 0,8 mm didelio srauto purkštukus. Naudokite atsargiai." # AI Translated #, c-format, boost-format msgid "%s may fail to load or unload due to the Filament Track Switch. If you wish to continue." msgstr "%s gali nepavykti įkelti arba iškelti dėl Filament Track Switch. Jei norite tęsti." #, c-format, boost-format msgid "%s is not supported by %s extruder." msgstr "%2$s ekstruderis nepalaiko %1$s." # AI Translated #, c-format, boost-format msgid "There may be critical print quality issues when printing '%s' with %s Bowden extruder. Use with caution!" msgstr "Spausdinant „%s“ su %s Bowden ekstruderiu gali kilti kritinių spausdinimo kokybės problemų. Naudokite atsargiai!" # AI Translated #, c-format, boost-format msgid "There may be critical print quality issues when printing '%s' with %s extruder. Use with caution!" msgstr "Spausdinant „%s“ su %s ekstruderiu gali kilti kritinių spausdinimo kokybės problemų. Naudokite atsargiai!" # AI Translated #, c-format, boost-format msgid "There may be print quality issues when printing '%s' with %s Bowden extruder. Use with caution." msgstr "Spausdinant „%s“ su %s Bowden ekstruderiu gali kilti spausdinimo kokybės problemų. Naudokite atsargiai." # AI Translated #, c-format, boost-format msgid "There may be print quality issues when printing '%s' with %s extruder. Use with caution." msgstr "Spausdinant „%s“ su %s ekstruderiu gali kilti spausdinimo kokybės problemų. Naudokite atsargiai." msgid "High Flow" msgstr "Didelis srautas (High Flow)" msgid "Standard" msgstr "Standartinis" # AI Translated msgid "TPU High Flow" msgstr "TPU High Flow" msgid "Unknown" msgstr "Nežinomas" msgid "Hardened Steel" msgstr "Grūdintas plienas" msgid "Stainless Steel" msgstr "Nerūdijantis plienas" msgid "Tungsten Carbide" msgstr "Volframo karbidas" # AI Translated msgid "The toolhead and hotend rack may move. Please keep your hands away from the chamber." msgstr "Spausdinimo galvutė ir kaitinimo blokų stovas gali judėti. Laikykite rankas atokiau nuo kameros." msgid "Warning" msgstr "Įspėjimas" # AI Translated msgid "Hotend information may be inaccurate. Would you like to re-read the hotend? (Hotend information may change during power-off)." msgstr "Kaitinimo bloko informacija gali būti netiksli. Ar norite iš naujo nuskaityti kaitinimo bloką? (Kaitinimo bloko informacija gali pasikeisti išjungus maitinimą.)" # AI Translated msgid "I confirm all" msgstr "Patvirtinu visus" # AI Translated msgid "Re-read all" msgstr "Nuskaityti visus iš naujo" # AI Translated msgid "Reading the hotends, please wait." msgstr "Nuskaitomi kaitinimo blokai, palaukite." # AI Translated msgid "During the hotend upgrade, the toolhead will move. Don't reach into the chamber." msgstr "Atnaujinant kaitinimo bloką spausdinimo galvutė judės. Nekiškite rankų į kamerą." # AI Translated msgid "Update" msgstr "Atnaujinti" msgid "Current AMS humidity" msgstr "Dabartinė AMS drėgmė" msgid "Humidity" msgstr "Drėgmė" msgid "Temperature" msgstr "Temperatūra" msgid "Left Time" msgstr "Liko laiko" msgid "Drying" msgstr "Džiovinimas" msgid "Idle" msgstr "Laukia" msgid "Model:" msgstr "Modelis:" msgid "Serial:" msgstr "Serijinis:" msgid "Version:" msgstr "Versija:" msgid "Latest version" msgstr "Naujausia versija" # AI Translated msgid "Row A" msgstr "A eilutė" # AI Translated msgid "Row B" msgstr "B eilutė" # AI Translated msgid "Toolhead" msgstr "Spausdinimo galvutė" msgid "Empty" msgstr "Tuščias" msgid "Error" msgstr "Klaida" # AI Translated msgid "Induction Hotend Rack" msgstr "Indukcinis kaitinimo blokų stovas" # AI Translated msgid "Hotends Info" msgstr "Kaitinimo blokų informacija" # AI Translated msgid "Read All" msgstr "Nuskaityti visus" # AI Translated msgid "Reading " msgstr "Nuskaitoma " # AI Translated msgid "Please wait" msgstr "Palaukite" # AI Translated msgid "Reading" msgstr "Nuskaitoma" # AI Translated msgid "Running..." msgstr "Vykdoma..." # AI Translated msgid "Raised" msgstr "Pakeltas" # AI Translated msgid "The hotend is in an abnormal state and currently unavailable. Please go to 'Device -> Upgrade' to upgrade firmware." msgstr "Kaitinimo blokas yra netinkamos būsenos ir šiuo metu neprieinamas. Pereikite į „Įrenginys -> Atnaujinti“, kad atnaujintumėte programinę įrangą." # AI Translated msgid "Abnormal Hotend" msgstr "Netinkamas kaitinimo blokas" msgid "Cancel" msgstr "Atšaukti" # AI Translated msgid "Jump to the upgrade page" msgstr "Pereiti į atnaujinimo puslapį" msgid "Refresh" msgstr "Atnaujinti" msgid "Refreshing" msgstr "Atnaujinama" # AI Translated msgid "Hotend status abnormal, unavailable at present. Please upgrade the firmware and try again." msgstr "Kaitinimo bloko būsena netinkama, šiuo metu neprieinama. Atnaujinkite programinę įrangą ir bandykite dar kartą." msgid "SN" msgstr "SN" msgid "Version" msgstr "Versija" # AI Translated #, c-format, boost-format msgid "Used Time: %s" msgstr "Naudojimo laikas: %s" # AI Translated msgid "Dynamic nozzles are allocated on the current plate. Picking hotend is not supported." msgstr "Dabartinėje plokštėje priskirti dinaminiai purkštukai. Kaitinimo bloko pasirinkimas nepalaikomas." # AI Translated msgid "Hotend Rack" msgstr "Kaitinimo blokų stovas" # AI Translated msgid "ToolHead" msgstr "Spausdinimo galvutė" # AI Translated msgid "Nozzle information needs to be read" msgstr "Reikia nuskaityti purkštuko informaciją" msgid "Support Painting" msgstr "Atramų piešimas" msgid "Apply" msgstr "Taikyti" msgid "On highlighted overhangs only" msgstr "Tik paryškintoms iškyšoms" msgid "Erase all" msgstr "Išvalyti viską" msgid "Highlight overhangs" msgstr "Paryškinti iškyšas" msgid "Tool type" msgstr "Įrankio tipas" msgid "Gap fill" msgstr "Plyšių užpildymas" msgid "Reset direction" msgstr "Atstatyti kryptį" msgid "Section view" msgstr "Pjūvio peržiūra" msgid "Brush size" msgstr "Teptuko dydis" msgid "Smart fill angle" msgstr "Išmanaus užpildymo kampas" msgid "Gap area" msgstr "Plyšio vieta" msgid "Left mouse button" msgstr "Kairysis pelės mygtukas" msgid "Enforce supports" msgstr "Priverstinės atramos" msgid "Right mouse button" msgstr "Dešinysis pelės mygtukas" msgid "Block supports" msgstr "Blokuoti atramas" msgid "Erase" msgstr "Trinti" msgid "Mouse wheel" msgstr "Pelės ratukas" msgid "Auto support threshold angle: " msgstr "Automatinių atramų generavimo kampas: " msgid "Circle" msgstr "Apskritimas" msgid "Sphere" msgstr "Sfera" msgid "Fill" msgstr "Užpildymas" msgid "Gap Fill" msgstr "Plyšių užpildymas" msgid "Vertical" msgstr "Vertikaliai" msgid "Horizontal" msgstr "Horizontaliai" #, boost-format msgid "Allows painting only on facets selected by: \"%1%\"" msgstr "Leidžia piešti tik ant paviršių, kuriuos pasirinko: „%1%“" msgid "Highlight faces according to overhang angle." msgstr "Paryškinti paviršius pagal iškyšos kampą." msgid "No auto support" msgstr "Nenaudoti automatinių atramų" msgid "Done" msgstr "Atlikta" msgid "Support generated" msgstr "Atramos sugeneruotos" msgid "Entering Paint-on supports" msgstr "Įjungiamas pieštų atramų režimas" msgid "Leaving Paint-on supports" msgstr "Išjungiamas pieštų atramų režimas" msgid "Paint-on supports editing" msgstr "Pieštų atramų redagavimas" msgid "Gizmo-Place on Face" msgstr "Manipuliatorius – Pridėti prie paviršiaus" msgid "Lay on Face" msgstr "Paguldyti ant paviršiaus" #, boost-format msgid "Filament count exceeds the maximum number that painting tool supports. Only the first %1% filaments will be available in painting tool." msgstr "Gijų skaičius viršija didžiausią piešimo įrankio palaikomą skaičių. Piešimo įrankyje bus prieinamos tik pirmosios %1% gijos." msgid "Color Painting" msgstr "Spalvotas piešimas" msgid "Brush shape" msgstr "Teptuko forma" msgid "Paint" msgstr "Piešti" msgid "Choose filament" msgstr "Pasirinkite giją" msgid "Edge detection" msgstr "Briaunų aptikimas" msgid "Triangles" msgstr "Trikampiai" msgid "Filaments" msgstr "Gijos" msgid "Brush" msgstr "Teptukas" msgid "Smart fill" msgstr "Išmanus užpildymas" msgid "Bucket fill" msgstr "Užpildymas liejant" msgid "Height range" msgstr "Aukščio diapazonas" msgid "Toggle Wireframe" msgstr "Perjungti karkasinį vaizdą" msgid "Remap filaments" msgstr "Priskirti gijas iš naujo" msgid "Remap" msgstr "Priskirti iš naujo" msgid "Reset" msgstr "Nustatyti iš naujo" # AI Translated msgctxt "Keyboard Shortcut" msgid "Enter" msgstr "Enter" msgid "Shortcut Key " msgstr "Spartusis klavišas " msgid "Triangle" msgstr "Trikampis" msgid "Height Range" msgstr "Aukščio diapazonas" msgid "Remove painted color" msgstr "Pašalinti dažytą spalvą" #, boost-format msgid "Painted using: Filament %1%" msgstr "Piešta naudojant: Gija %1%" msgid "To:" msgstr "Iki:" msgid "Entering color painting" msgstr "Įjungiamas spalvų piešimas" msgid "Leaving color painting" msgstr "Išjungiamas spalvų piešimas" msgid "Color painting editing" msgstr "Spalvų piešimo redagavimas" msgid "Paint-on fuzzy skin" msgstr "Piešti grublėtą paviršių" msgid "Add fuzzy skin" msgstr "Pridėti grublėtą paviršių" msgid "Remove fuzzy skin" msgstr "Pašalinti grublėtą paviršių" msgid "Reset selection" msgstr "Atstatyti parinktį" msgid "Warning: Fuzzy skin is disabled, painted fuzzy skin will not take effect!" msgstr "Įspėjimas: grublėtas paviršius išjungtas, užpieštas grublėtas paviršius neturės įtakos!" msgid "Enable painted fuzzy skin for this object" msgstr "Įjungti užpieštą grublėtą paviršių šiam objektui" msgid "Entering Paint-on fuzzy skin" msgstr "Įjungiamas grublėto paviršiaus piešimas" msgid "Leaving Paint-on fuzzy skin" msgstr "Išjungiamas grublėto paviršiaus piešimas" msgid "Paint-on fuzzy skin editing" msgstr "Grublėto paviršiaus piešimo redagavimas" msgid "Move" msgstr "Perkelti" msgid "Please select at least one object." msgstr "Pasirinkite bent vieną objektą." msgid "Gizmo-Move" msgstr "Manipuliatorius – Perkėlimas" msgid "Rotate" msgstr "Pasukti" msgid "Gizmo-Rotate" msgstr "Manipuliatorius – Pasukimas" msgid "Optimize orientation" msgstr "Optimizuoti orientaciją" msgctxt "Verb" msgid "Scale" msgstr "Mastelis" msgid "Gizmo-Scale" msgstr "Manipuliatorius – Mastelio keitimas" msgid "Error: Please close all toolbar menus first" msgstr "Klaida: Prašome pirmiau uždaryti visus įrankių juostos meniu" msgctxt "inches" msgid "in" msgstr "col." msgid "mm" msgstr "mm." msgid "Part selection" msgstr "Detalių pasirinkimas" msgid "Fixed step drag" msgstr "Vilkimas fiksuotu žingsniu" msgid "Context Menu" msgstr "Kontekstinis meniu" msgid "Toggle Auto-Drop" msgstr "Įjungti / išjungti automatinį nuleidimą" msgid "Single sided scaling" msgstr "Vienpusis mastelio keitimas" msgid "Position" msgstr "Padėtis" msgid "Rotate (relative)" msgstr "Pasukti (santykinai)" msgid "Scale ratios" msgstr "Mastelio koeficientai" msgid "Object operations" msgstr "Objekto veiksmai" msgid "Scale" msgstr "Mastelis" msgid "Volume operations" msgstr "Tūrio veiksmai" msgid "Translate" msgstr "Slinkti" msgid "Group operations" msgstr "Grupės veiksmai" msgid "Set orientation" msgstr "Nustatyti padėtį" msgid "Set scale" msgstr "Nustatyti mastelį" msgid "Reset position" msgstr "Atstatyti padėtį" msgid "Reset rotation" msgstr "Iš naujo nustatyti sukimąsi" msgid "World" msgstr "Pasaulio koordinatės" msgid "Object" msgstr "Objektas" msgid "Part" msgstr "Dalis" msgid "Relative" msgstr "Santykinis" msgid "Coordinate system used for transform actions." msgstr "Transformavimo veiksmams naudojama koordinačių sistema." msgid "Absolute" msgstr "Absoliutus" msgid "Reset current rotation to the value when open the rotation tool." msgstr "Atkurti dabartinį pasukimą iki vertės, buvusios atidarius pasukimo įrankį." msgid "Reset current rotation to real zeros." msgstr "Atstatyti dabartinį sukimąsi į tikrąsias nulines vertes." msgctxt "Noun" msgid "Scale" msgstr "Mastelis" #. TRN - Input label. Be short as possible msgid "Size" msgstr "Dydis" msgid "Uniform scale" msgstr "Vienodas mastelis" msgid "Planar" msgstr "Plokštuminis" msgid "Dovetail" msgstr "Kregždės uodega" msgid "Auto" msgstr "Automatiškai" msgid "Manual" msgstr "Rankiniu būdu" msgid "Plug" msgstr "Kištukas" msgid "Dowel" msgstr "Kaištis" msgid "Snap" msgstr "Fiksatorius" msgid "Prism" msgstr "Prizmė" msgid "Frustum" msgstr "Nukirsta piramidė" msgid "Square" msgstr "Kvadratas" msgid "Hexagon" msgstr "Šešiakampis" msgid "Keep orientation" msgstr "Išlaikyti padėtį" msgid "Place on cut" msgstr "Padėti ant pjūvio" msgid "Flip upside down" msgstr "Apversti aukštyn kojom" msgid "Connectors" msgstr "Jungtys" msgid "Type" msgstr "Tipas" msgid "Style" msgstr "Stilius" msgid "Shape" msgstr "Forma" #. TRN - Input label. Be short as possible #. Size in emboss direction #. TRN - Input label. Be short as possible msgid "Depth" msgstr "Gylis" #. TRN - Input label. Be short as possible #. Angle between Y axis and text line direction. #. TRN - Input label. Be short as possible msgid "Rotation" msgstr "Pasukimas" msgid "Groove" msgstr "Griovelis" msgid "Width" msgstr "Plotis" msgid "Flap Angle" msgstr "Atvertimo kampas" msgid "Groove Angle" msgstr "Griovelio kampas" msgid "Cut position" msgstr "Pjovimo vieta" msgid "Build Volume" msgstr "Spausdinimo tūris" msgid "Multiple" msgstr "Keli" msgid "Count" msgstr "Kiekis" msgid "Gap" msgstr "Tarpas" msgid "Spacing" msgstr "Tarpai" msgid "" "Click to flip the cut plane\n" "Drag to move the cut plane" msgstr "" "Paspauskite, norėdami apversti pjūvio plokštumą\n" "Vilkite, norėdami perkelti pjūvio plokštumą" msgid "" "Click to flip the cut plane\n" "Drag to move the cut plane\n" "Right-click a part to assign it to the other side" msgstr "" "Paspauskite, norėdami apversti pjūvio plokštumą\n" "Vilkite, norėdami perkelti pjūvio plokštumą\n" "Dešiniuoju pelės mygtuku spustelėkite dalį, kad ją priskirtumėte kitai pusei" msgid "Move cut plane" msgstr "Perkelti pjūvio plokštumą" msgid "Mode" msgstr "Režimas" msgid "Change cut mode" msgstr "Keisti pjūvio režimą" msgid "Tolerance" msgstr "Tolerancija" msgid "Drag" msgstr "Vilkti" msgid "Move cut line" msgstr "Perkelti pjovimo liniją" msgid "Draw cut line" msgstr "Brėžti pjūvio liniją" msgid "Add connector" msgstr "Įtraukti jungtį" msgid "Remove connector" msgstr "Pašalinti jungtį" msgid "Move connector" msgstr "Perkelti jungtį" msgid "Add connector to selection" msgstr "Pridėti jungtį prie parinkties" msgid "Remove connector from selection" msgstr "Pašalinti jungtį iš parinkties" msgid "Select all connectors" msgstr "Pasirinkti visas jungtis" # AI Translated msgctxt "Cut tool" msgid "Cut" msgstr "Iškirpti" msgid "Rotate cut plane" msgstr "Sukti pjovimo plokštumą" msgid "Remove connectors" msgstr "Pašalinti jungtis" msgid "Bulge" msgstr "Iškilimas" msgid "Bulge proportion related to radius" msgstr "Iškilimo proporcija spindulio atžvilgiu" msgid "Space" msgstr "Intervalas" msgid "Space proportion related to radius" msgstr "Tarpo proporcija spindulio atžvilgiu" msgid "Confirm connectors" msgstr "Patvirtinti jungtis" msgid "Flip cut plane" msgstr "Apversti pjovimo plokštumą" msgid "Groove change" msgstr "Griovelio kaita" #. TRN: This is an entry in the Undo/Redo stack. The whole line will be 'Edited: (name of whatever was edited)'. msgid "Edited" msgstr "Taisyta" msgid "Reset cutting plane" msgstr "Atstatyti pjovimo plokštumą" msgid "Edit connectors" msgstr "Taisyti jungtis" msgid "Add connectors" msgstr "Įtraukti jungtis" msgid "Upper part" msgstr "Viršutinė dalis" msgid "Lower part" msgstr "Apatinė dalis" msgid "Keep" msgstr "Palikti" msgid "Flip" msgstr "Apversti" msgid "After cut" msgstr "Po pjovimo" msgid "Cut to parts" msgstr "Supjaustyti į detales" msgid "Reset cutting plane and remove connectors" msgstr "Atstatyti pjovimo plokštumą ir pašalinti jungtis" # AI Translated msgid "Reset Cut" msgstr "Atkurti pjūvį" msgid "Perform cut" msgstr "Atlikti pjūvį" msgid "Invalid connectors detected" msgstr "Nustatytos netinkamos jungtys" #, c-format, boost-format msgid "%1$d connector is out of cut contour" msgid_plural "%1$d connectors are out of cut contour" msgstr[0] "%1$d jungtis išeina už pjovimo kontūro" msgstr[1] "%1$d jungtys išeina už pjovimo kontūro" msgstr[2] "%1$d jungčių išeina už pjovimo kontūro" #, c-format, boost-format msgid "%1$d connector is out of object" msgid_plural "%1$d connectors are out of object" msgstr[0] "%1$d jungtis yra už objekto ribų" msgstr[1] "%1$d jungtys yra už objekto ribų" msgstr[2] "%1$d jungčių yra už objekto ribų" msgid "Some connectors are overlapped" msgstr "Kai kurios jungtys persidengia" msgid "Select at least one object to keep after cutting." msgstr "Pasirinkite bent vieną objektą, kurį norite išlaikyti po pjūvio." msgid "Cut plane is placed out of object" msgstr "Pjovimo plokštuma yra už objekto ribų" msgid "Cut plane with groove is invalid" msgstr "Neteisinga pjovimo plokštuma su grioveliu" msgid "Connector" msgstr "Jungtis" # AI Translated #, boost-format msgid "" "Objects(%1%) have duplicated connectors. Some connectors may be missing in slicing result.\n" "Please report to the OrcaSlicer team in which scenario this issue happened.\n" "Thank you." msgstr "" "Objektai (%1%) turi pasikartojančių jungčių. Kai kurių jungčių gali trūkti pjaustymo rezultate.\n" "Praneškite OrcaSlicer komandai, kokiu atveju kilo ši problema.\n" "Ačiū." msgid "Cut by Plane" msgstr "Pjovimas plokštuma" msgid "Non-manifold edges be caused by cut tool: do you want to fix now?" msgstr "Netinkami kraštai atsirado dėl pjovimo įrankio. Ar norite sutvarkyti dabar?" msgid "Repairing model object" msgstr "Taisomas modelio objektas" msgid "Cut by line" msgstr "Pjovimas pagal liniją" msgid "Delete connector" msgstr "Ištrinti jungtį" msgid "Entering Cut gizmo" msgstr "Įjungiamas pjovimo manipuliatorius" msgid "Leaving Cut gizmo" msgstr "Išjungiamas pjovimo manipuliatorius" msgid "Cut gizmo editing" msgstr "Pjovimo manipuliatoriaus redagavimas" msgid "Mesh name" msgstr "Poligoninio tinklo pavadinimas" msgid "Detail level" msgstr "Detalių lygis" msgid "Decimate ratio" msgstr "Retinimo koeficientas" #, boost-format msgid "Processing model '%1%' with more than 1M triangles could be slow. It is highly recommended to simplify the model." msgstr "Modelio „%1%“ apdorojimas su daugiau nei 1 milijonu trikampių gali būti lėtas. Labai rekomenduojama supaprastinti modelį." msgid "Simplify model" msgstr "Supaprastinti modelį" msgid "Simplify" msgstr "Supaprastinti" msgid "Simplification is currently only allowed when a single part is selected" msgstr "Šiuo metu supaprastinimas leidžiamas tik tada, kai pasirenkama viena dalis" msgid "Extra high" msgstr "Labai aukštas" msgid "High" msgstr "Aukštas" msgid "Medium" msgstr "Vidutinis" msgid "Low" msgstr "Žemas" msgid "Extra low" msgstr "Labai žemas" #, c-format, boost-format msgid "%d triangles" msgstr "%d trikampiai" msgid "Show wireframe" msgstr "Rodyti karkasinį vaizdą" msgid "Unable to apply when processing preview" msgstr "Nepavyko pritaikyti apdorojant peržiūrą" msgid "Operation already cancelling. Please wait a few seconds." msgstr "Operacija jau atšaukiama. Palaukite kelias sekundes." msgid "Face recognition" msgstr "Paviršių atpažinimas" msgid "Perform Recognition" msgstr "Atlikti atpažinimą" msgid "Enforce seam" msgstr "Priverstinė siūlė" msgid "Block seam" msgstr "Blokuoti siūlę" msgid "Seam painting" msgstr "Siūlių piešimas" msgid "Remove selection" msgstr "Pašalinti pasirinkimą" msgid "Entering seam painting" msgstr "Įjungiamas siūlių piešimas" msgid "Leaving Seam painting" msgstr "Išjungiamas siūlių piešimas" msgid "Paint-on seam editing" msgstr "Taisomos pieštos siūlės" #. TRN - Input label. Be short as possible #. Select look of letter shape msgid "Font" msgstr "Šriftas" msgid "Thickness" msgstr "Storis" msgid "Text Gap" msgstr "Tarpas tarp simbolių" msgid "Angle" msgstr "Kampas" msgid "Embedded depth" msgstr "" "Įspaudimo\n" "gylis" msgid "Input text" msgstr "Įveskite tekstą" msgid "Surface" msgstr "Paviršius" msgid "Horizontal text" msgstr "Horizontalus tekstas" msgid "Shift+" msgstr "Shift+" msgid "Mouse move up or down" msgstr "Pele judėkite aukštyn arba žemyn" msgid "Rotate text" msgstr "Sukti tekstą" msgid "Text shape" msgstr "Teksto forma" #. TRN - Title in Undo/Redo stack after rotate with text around emboss axe msgid "Text rotate" msgstr "Sukti tekstą" #. TRN - Title in Undo/Redo stack after move with text along emboss axe - From surface msgid "Text move" msgstr "Perkelti tekstą" msgid "Set Mirror" msgstr "Nustatyti veidrodį" msgid "Embossed text" msgstr "Iškilus tekstas" msgid "Enter emboss gizmo" msgstr "Įjungti teksto (emboss) manipuliatorių" msgid "Leave emboss gizmo" msgstr "Išjungti teksto (emboss) manipuliatorių" msgid "Embossing actions" msgstr "Teksto (emboss) veiksmai" msgid "Position on surface" msgstr "Padėtis ant paviršiaus" msgid "Emboss" msgstr "Tekstas (Emboss)" msgid "NORMAL" msgstr "ĮPRASTAS" msgid "SMALL" msgstr "MAŽAS" msgid "ITALIC" msgstr "KURSYVAS" msgid "SWISS" msgstr "SWISS" msgid "MODERN" msgstr "MODERNUS" msgid "First font" msgstr "Pirmas šriftas" msgid "Default font" msgstr "Numatytasis šriftas" msgid "Advanced" msgstr "Išplėstiniai" msgid "Reset all options except the text and operation" msgstr "Atstatyti visus parametrus, išskyrus tekstą ir operaciją" msgid "The text cannot be written using the selected font. Please try choosing a different font." msgstr "Pasirinktu šriftu negalima rašyti teksto. Pasirinkite kitą šriftą." msgid "Embossed text cannot contain only white spaces." msgstr "Reljefinis tekstas negali būti sudarytas vien iš tarpų." msgid "Text contains character glyph (represented by '?') unknown by font." msgstr "Tekste yra simbolių (žymimi „?“), kurių šriftas neatpažįsta." msgid "Text input doesn't show font skew." msgstr "Teksto įvestis nerodo šrifto pasvirimo." msgid "Text input doesn't show font boldness." msgstr "Teksto įvestis nerodo šrifto paryškinimo." msgid "Text input doesn't show gap between lines." msgstr "Teksto įvestis nerodo tarpelio tarp eilučių." msgid "Too tall, diminished font height inside text input." msgstr "Per aukštas, - sumažintas šrifto aukštis teksto įvedimo laukelyje." msgid "Too small, enlarged font height inside text input." msgstr "Per mažas, - padidintas šrifto aukštis teksto įvedimo laukelyje." msgid "Text doesn't show current horizontal alignment." msgstr "Tekstas nerodo dabartinio horizontalaus išlyginimo." msgid "Revert font changes." msgstr "Grąžinti šriftą į pradinę būseną." #, boost-format msgid "Font \"%1%\" can't be selected." msgstr "Nepavyksta pasirinkti šrifto „%1%“." msgid "Operation" msgstr "Operacija" #. TRN EmbossOperation #. ORCA msgid "Join" msgstr "Sujungti" msgid "Click to change text into object part." msgstr "Spustelėkite, kad tekstas taptų objekto dalimi." msgid "You can't change a type of the last solid part of the object." msgstr "Negalite pakeisti paskutinės vientisos objekto dalies tipo." msgctxt "EmbossOperation" msgid "Cut" msgstr "Pjauti" msgid "Click to change part type into negative volume." msgstr "Spustelėkite, kad dalies tipą pakeistumėte į neigiamą tūrį (ertmę)." msgid "Modifier" msgstr "Modifikatorius" msgid "Click to change part type into modifier." msgstr "Spustelėkite, kad dalies tipą pakeistumėte į modifikatorių." msgid "Change Text Type" msgstr "Pakeisti teksto tipą" #, boost-format msgid "Rename style (%1%) for embossing text" msgstr "Pervadinkite (%1%) stilių reljefiniam tekstui" msgid "Name can't be empty." msgstr "Pavadinimas negali būti tuščias." msgid "Name has to be unique." msgstr "Pavadinimas privalo būti unikalus." msgid "OK" msgstr "Gerai" msgid "Rename style" msgstr "Pervardinti stilių" msgid "Rename current style." msgstr "Pervardinti dabartinį stilių." msgid "Can't rename temporary style." msgstr "Negalima pervardinti laikino stiliaus." msgid "First Add style to list." msgstr "Pirmiausia įtraukite stilių į sąrašą." #, boost-format msgid "Save %1% style" msgstr "Išsaugoti %1% stilių" msgid "No changes to save." msgstr "Nėra jokių pakeitimų." msgid "New name of style" msgstr "Naujas stiliaus pavadinimas" msgid "Save as new style" msgstr "Išsaugoti kaip naują stilių" msgid "Only valid font can be added to style." msgstr "Į stilių gali būti įtrauktas tik tinkamas šriftas." msgid "Add style to my list." msgstr "Įtraukti stilių į mano sąrašą." msgid "Save as new style." msgstr "Išsaugoti kaip naują stilių." msgid "Remove style" msgstr "Pašalinti stilių" msgid "Can't remove the last existing style." msgstr "Negalima pašalinti paskutinio stiliaus." #, boost-format msgid "Are you sure you want to permanently remove the \"%1%\" style?" msgstr "Ar tikrai norite visam laikui pašalinti stilių „%1%“?" #, boost-format msgid "Delete \"%1%\" style." msgstr "Ištrinti stilių „%1%“." #, boost-format msgid "Can't delete \"%1%\". It is last style." msgstr "Negalima ištrinti „%1%“. Tai yra paskutinis stilius." #, boost-format msgid "Can't delete temporary style \"%1%\"." msgstr "Negalima ištrinti laikino stiliaus „%1%“." #, boost-format msgid "Modified style \"%1%\"" msgstr "Modifikuotas stilius „%1%“" #, boost-format msgid "Current style is \"%1%\"" msgstr "Dabartinis stilius yra „%1%“" #, boost-format msgid "" "Changing style to \"%1%\" will discard current style modification.\n" "\n" "Would you like to continue anyway?" msgstr "" "Keičiant stilių į „%1%“, visi dabartinio stiliaus modifikavimai bus atmesti.\n" "\n" "Ar vis tiek norite tęsti?" msgid "Not valid style." msgstr "Netinkamas stilius." #, boost-format msgid "Style \"%1%\" can't be used and will be removed from a list." msgstr "Stiliaus „%1%“ naudoti negalima, todėl jis bus pašalintas iš sąrašo." msgid "Unset italic" msgstr "Išjungti kursyvą" msgid "Set italic" msgstr "Įjungti kursyvą" msgid "Unset bold" msgstr "Išjungti paryškinimą" msgid "Set bold" msgstr "Įjungti paryškinimą" msgid "Revert text size." msgstr "Atstatyti teksto dydį." msgid "Revert embossed depth." msgstr "Atstatyti reljefo gylį." msgid "" "Advanced options cannot be changed for the selected font.\n" "Select another font." msgstr "" "Pasirinktam šriftui negalima keisti išplėstinių parinkčių.\n" "Pasirinkite kitą šriftą." msgid "Revert using of model surface." msgstr "Atstatyti modelio paviršiaus naudojimą." msgid "Revert Transformation per glyph." msgstr "Atstatyti kiekvieno simbolio transformaciją." msgid "Set global orientation for whole text." msgstr "Nustatyti viso teksto bendrą orientaciją." msgid "Set position and orientation per glyph." msgstr "Nustatyti kiekvieno simbolio atskirą poziciją ir orientaciją." msgctxt "Alignment" msgid "Left" msgstr "Kairėje" msgctxt "Alignment" msgid "Center" msgstr "Centre" msgctxt "Alignment" msgid "Right" msgstr "Dešinėje" msgctxt "Alignment" msgid "Top" msgstr "Viršuje" msgctxt "Alignment" msgid "Middle" msgstr "Viduryje" msgctxt "Alignment" msgid "Bottom" msgstr "Apačioje" msgid "Revert alignment." msgstr "Atstatyti lygiavimą." #. TRN EmbossGizmo: font units msgid "points" msgstr "taškai" msgid "Revert gap between characters" msgstr "Atstatyti tarpus tarp raidžių" msgid "Distance between characters" msgstr "Atstumas tarp simbolių" msgid "Revert gap between lines" msgstr "Atstatyti tarpus tarp eilučių" msgid "Distance between lines" msgstr "Atstumas tarp eilučių" msgid "Undo boldness" msgstr "Panaikinti paryškinimą" msgid "Tiny / Wide glyphs" msgstr "Siauri / platūs simboliai" msgid "Undo letter's skew" msgstr "Panaikinti raidės pasvirimą" msgid "Italic strength ratio" msgstr "Kursyvo pasvirimo kampas" msgid "Undo translation" msgstr "Panaikinti slinkimą" msgid "Distance of the center of the text to the model surface." msgstr "Atstumas nuo teksto centro iki modelio paviršiaus." msgid "Undo rotation" msgstr "Panaikinti pasukimą" msgid "Rotate text Clockwise." msgstr "Sukti tekstą pagal laikrodžio rodyklę." msgid "Unlock the text's rotation when moving text along the object's surface." msgstr "Leisti tekstui laisvai suktis jį stumdant objekto paviršiumi." msgid "Lock the text's rotation when moving text along the object's surface." msgstr "Neleisti tekstui laisvai suktis jį stumdant objekto paviršiumi." msgid "Select from True Type Collection." msgstr "Pasirinkti iš TrueType rinkinio." msgid "Set text to face camera" msgstr "Nukreipti tekstą į kamerą" msgid "Orient the text towards the camera." msgstr "Pasukti tekstą į kameros pusę." #, boost-format msgid "Font \"%1%\" can't be used. Please select another." msgstr "Šrifto „%1%“ negalima naudoti. Pasirinkite kitą." #, boost-format msgid "Can't load exactly same font (\"%1%\"). Application selected a similar one (\"%2%\"). You have to specify font for enable edit text." msgstr "Nepavyko įkelti lygiai tokio paties šrifto („%1%“). Programa parinko panašų šriftą („%2%“). Norėdami redaguoti tekstą, turite nurodyti šriftą." msgid "No symbol" msgstr "Nėra simbolio" msgid "Loading" msgstr "Įkeliama" msgid "In queue" msgstr "Eilėje" #. TRN - Input label. Be short as possible #. Height of one text line - Font Ascent msgid "Height" msgstr "Aukštis" #. TRN - Input label. Be short as possible #. Copy surface of model on surface of the embossed text #. TRN - Input label. Be short as possible msgid "Use surface" msgstr "Naudoti paviršių" #. TRN - Input label. Be short as possible #. Option to change projection on curved surface #. for each character(glyph) in text separately msgid "Per glyph" msgstr "Kiekvienam simboliui" #. TRN - Input label. Be short as possible #. Align Top|Middle|Bottom and Left|Center|Right msgid "Alignment" msgstr "Lygiavimas" #. TRN - Input label. Be short as possible msgid "Char gap" msgstr "Tarpas tarp simbolių" #. TRN - Input label. Be short as possible msgid "Line gap" msgstr "Tarpas tarp eilučių" #. TRN - Input label. Be short as possible msgid "Boldness" msgstr "Storis" #. TRN - Input label. Be short as possible #. Like Font italic msgid "Skew ratio" msgstr "Pasvirimas" #. TRN - Input label. Be short as possible #. Distance from model surface to be able #. move text as part fully into not flat surface #. move text as modifier fully out of not flat surface #. TRN - Input label. Be short as possible msgid "From surface" msgstr "Nuo paviršiaus" #. TRN - Input label. Be short as possible #. Keep vector from bottom to top of text aligned with printer Y axis msgid "Keep up" msgstr "Išlaikyti vertikalumą" #. TRN - Input label. Be short as possible. #. Some Font file contain multiple fonts inside and #. this is numerical selector of font inside font collections msgid "Collection" msgstr "Rinkinys" #. TRN - Title in Undo/Redo stack after rotate with SVG around emboss axe msgid "SVG rotate" msgstr "SVG sukimas" #. TRN - Title in Undo/Redo stack after move with SVG along emboss axe - From surface msgid "SVG move" msgstr "SVG slinkimas" msgid "Enter SVG gizmo" msgstr "Įjungti SVG manipuliatorių" msgid "Leave SVG gizmo" msgstr "Išjungti SVG manipuliatorių" msgid "SVG actions" msgstr "SVG veiksmai" msgid "SVG" msgstr "SVG" #, boost-format msgid "Opacity (%1%)" msgstr "Neskaidrumas (%1%)" #, boost-format msgid "Color gradient (%1%)" msgstr "Spalvos gradientas (%1%)" msgid "Undefined fill type" msgstr "Nenustatytas užpildymo tipas" msgid "Linear gradient" msgstr "Linijinis gradientas" msgid "Radial gradient" msgstr "Radialinis gradientas" msgid "Open filled path" msgstr "Atviras užpildytas kontūras" msgid "Undefined stroke type" msgstr "Nenustatytas brūkšnio stilius" msgid "Path can't be healed from self-intersection and multiple points." msgstr "Kontūro (kelio) nepavyko sutvarkyti dėl savaiminio susikirtimo ar besidubliuojančių taškų." msgid "Final shape contains self-intersection or multiple points with same coordinate." msgstr "Galutinėje formoje yra savaiminių susikirtimų arba keli taškai su ta pačia koordinate." #, boost-format msgid "Shape is marked as invisible (%1%)." msgstr "Forma pažymėta kaip nematoma (%1%)." #. TRN: The first placeholder is shape identifier, the second is text describing the problem. #, boost-format msgid "Fill of shape (%1%) contains unsupported: %2%." msgstr "Formos (%1%) užpilde yra nepalaikomų elementų: %2%." #, boost-format msgid "Stroke of shape (%1%) is too thin (minimal width is %2% mm)." msgstr "Formos (%1%) kontūras yra per plonas (minimalus plotis – %2% mm)." #, boost-format msgid "Stroke of shape (%1%) contains unsupported: %2%." msgstr "Formos (%1%) kontūre yra nepalaikomų elementų: %2%." msgid "Face the camera" msgstr "Nukreipti į kamerą" #. TRN - Preview of filename after clear local filepath. msgid "Unknown filename" msgstr "Nežinomas failo pavadinimas" #, boost-format msgid "SVG file path is \"%1%\"" msgstr "SVG failo kelias yra „%1%“" msgid "Reload SVG file from disk." msgstr "Pakartotinai įkelti SVG failą iš disko." msgid "Change file" msgstr "Pakeisti failą" msgid "Change to another SVG file." msgstr "Pakeisti į kitą SVG failą." msgid "Forget the file path" msgstr "Pamiršti failo kelią" msgid "" "Do NOT save local path to 3MF file.\n" "Also disables 'reload from disk' option." msgstr "" "NEsaugoti vietinio failo kelio į 3MF failą.\n" "Taip pat išjungiama parinktis „pakartotinai įkelti iš disko“." #. TRN: An menu option to convert the SVG into an unmodifiable model part. msgid "Bake" msgstr "Sujungti negrįžtamai" #. TRN: Tooltip for the menu item. msgid "Bake into model as uneditable part" msgstr "Įrašyti į modelį kaip neredaguojamą dalį" msgid "Save as" msgstr "Išsaugoti kaip" msgid "Save SVG file" msgstr "Išsaugoti SVG failą" msgid "Save as SVG file." msgstr "Išsaugoti kaip SVG failą." msgid "Size in emboss direction." msgstr "Dydis išspaudimo kryptimi." #. TRN: The placeholder contains a number. #, boost-format msgid "Scale also changes amount of curve samples (%1%)" msgstr "Mastelis taip pat keičia kreivės taškų skaičių (%1%)" msgid "Width of SVG." msgstr "SVG plotis." msgid "Height of SVG." msgstr "SVG aukštis." msgid "Lock/unlock the aspect ratio of the SVG." msgstr "Rakinti / atrakinti SVG proporcijas." msgid "Reset scale" msgstr "Atstatyti mastelį" msgid "Distance of the center of the SVG to the model surface." msgstr "Atstumas nuo SVG centro iki modelio paviršiaus." msgid "Reset distance" msgstr "Atstatyti atstumą į numatytąjį" msgid "Lock/unlock rotation angle when dragging above the surface." msgstr "Rakinti / atrakinti sukimosi kampą velkant paviršiumi." msgid "Mirror vertically" msgstr "Atspindėti vertikaliai" msgid "Mirror horizontally" msgstr "Atspindėti horizontaliai" #. TRN: This is the name of the action that shows in undo/redo stack (changing part type from SVG to something else). msgid "Change SVG Type" msgstr "Keisti SVG tipą" #. TRN - Input label. Be short as possible msgid "Mirror" msgstr "Atspindėti" msgid "Choose SVG file for emboss:" msgstr "Pasirinkti SVG failą išspaudimui:" #, boost-format msgid "File does NOT exist (%1%)." msgstr "Failas neegzistuoja (%1%)." #, boost-format msgid "Filename has to end with \".svg\" but you selected %1%" msgstr "Failo pavadinimas turi baigtis „.svg“, bet jūs pasirinkote %1%" #, boost-format msgid "Nano SVG parser can't load from file (%1%)." msgstr "„NanoSVG“ analizatorius negali įkelti failo (%1%)." #, boost-format msgid "SVG file does NOT contain a single path to be embossed (%1%)." msgstr "SVG failas NETURI nė vieno kontūro, tinkamo išspaudimui (%1%)." msgid "No feature" msgstr "Nėra geometrinio elemento" msgid "Vertex" msgstr "Viršūnė" msgid "Edge" msgstr "Briauna" msgid "Plane" msgstr "Plokštuma" msgid "Point on edge" msgstr "Taškas ant briaunos" msgid "Point on circle" msgstr "Taškas ant apskritimo" msgid "Point on plane" msgstr "Taškas ant plokštumos" msgid "Center of edge" msgstr "Briaunos centras" msgid "Center of circle" msgstr "Apskritimo centras" msgid "Select" msgstr "Pasirinkti" msgid "Select point" msgstr "Pasirinkti tašką" # AI Translated msgctxt "Keyboard Shortcut" msgid "Delete" msgstr "Delete" msgid "Restart selection" msgstr "Pasirinkti iš naujo" # AI Translated msgctxt "Keyboard Shortcut" msgid "Esc" msgstr "Esc" msgid "Cancel a feature until exit" msgstr "Atmesti elementą iki išėjimo" msgid "Measure" msgstr "Matuoti" msgid "Please confirm explosion ratio = 1, and please select at least one object." msgstr "Įsitikinkite, kad išskaidymo (explosion) koeficientas = 1, ir pasirinkite bent vieną objektą." msgid "Edit to scale" msgstr "Taisyti masteliui" msgctxt "Verb" msgid "Scale all" msgstr "Keisti visų mastelį" msgid "None" msgstr "Nieko" msgid "Diameter" msgstr "Skersmuo" msgid "Length" msgstr "Ilgis" msgid "Selection" msgstr "Pasirinkimas" msgid " (Moving)" msgstr " (Judantis)" msgid "" "Select 2 faces on objects and \n" " make objects assemble together." msgstr "" "Pasirinkite 2 objektų paviršius ir \n" " leiskite objektams susijungti." msgid "" "Select 2 points or circles on objects and \n" " specify distance between them." msgstr "" "Pasirinkite 2 taškus arba apskritimus ant \n" "objektų ir nurodykite atstumą tarp jų." msgid "Face" msgstr "Paviršius" msgid " (Fixed)" msgstr " (Fiksuotas)" msgid "Point" msgstr "Taškas" msgid "" "Feature 1 has been reset, \n" "feature 2 has been feature 1" msgstr "" "1 elementas buvo nustatytas iš naujo, \n" "2 elementas tapo 1 elementu" msgid "Copy to clipboard" msgstr "Nukopijuoti į iškarpinę" msgid "Perpendicular distance" msgstr "Statmenas atstumas" msgid "Distance" msgstr "Atstumas" msgid "Direct distance" msgstr "Tiesioginis atstumas" msgid "Distance XYZ" msgstr "Atstumas XYZ" msgid "Parallel" msgstr "Lygiagrečiai" msgid "Center coincidence" msgstr "Centro sutapimas" msgid "Feature 1" msgstr "Funkcija 1" msgid "Reverse rotation" msgstr "Apsukti sukimąsi" msgid "Rotate around center:" msgstr "Pasukti aplink centrą:" msgid "Parallel distance:" msgstr "Lygiagretus atstumas:" msgid "Flip by Face 2" msgstr "Apversti pagal paviršių 2" msgid "Entering Measure gizmo" msgstr "Įjungiamas matavimo manipuliatorius" msgid "Leaving Measure gizmo" msgstr "Išjungiamas matavimo manipuliatorius" # AI Translated msgctxt "Assembly tool" msgid "Assemble" msgstr "Surinkti" msgid "Please confirm explosion ratio = 1 and select at least two volumes." msgstr "Įsitikinkite, kad išskaidymo koeficientas = 1, ir pasirinkite bent du tūrius." msgid "Please select at least two volumes." msgstr "Pasirinkite bent du tūrius." msgid "(Moving)" msgstr "(Judantis)" msgid "Point and point assembly" msgstr "Sujungimas pagal taškus" msgid "Warning: please select two different meshes." msgstr "Įspėjimas: pasirinkite du skirtingus poligoninius tinklus (meshes)." msgid "Warning: please select Plane's feature." msgstr "Įspėjimas: pasirinkite plokštumos elementą." msgid "Warning: please select Point's or Circle's feature." msgstr "Įspėjimas: pasirinkite taško arba apskritimo elementą." msgid "" "It is recommended to assemble objects first,\n" "because they are restricted to the bed \n" "and only parts can be lifted." msgstr "" "Rekomenduojama pirmiausia surinkti objektus, \n" "nes jie yra pritvirtinti prie platformos \n" "ir pakelti galima tik atskiras dalis." msgid "Face and face assembly" msgstr "Sujungimas pagal paviršius" msgid "Entering Assembly gizmo" msgstr "Įjungiamas surinkimo manipuliatorius" msgid "Leaving Assembly gizmo" msgstr "Išjungiamas surinkimo manipuliatorius" msgid "Ctrl+" msgstr "Ctrl+" msgid "Alt+" msgstr "Alt+" msgid "Notice" msgstr "Pastaba" msgid "Undefined" msgstr "Neapibrėžtas" #, boost-format msgid "%1% was replaced with %2%" msgstr "%1% buvo pakeistas į %2%" msgid "The configuration may be generated by a newer version of OrcaSlicer." msgstr "Konfigūracija gali būti sukurta naujesnėje OrcaSlicer versijoje." msgid "Some values have been replaced. Please check them:" msgstr "Kai kurios vertės buvo pakeistos. Prašome jas patikrinti:" msgid "Process" msgstr "Procesas" msgid "Filament" msgstr "Gija" msgid "Machine" msgstr "Spausdintuvas" msgid "The configuration package was loaded, but some values were not recognized." msgstr "Konfigūracijos paketas buvo įkeltas, tačiau kai kurios reikšmės nebuvo atpažintos." #, boost-format msgid "The configuration file “%1%” was loaded, but some values were not recognized." msgstr "Konfigūracijos failas „%1%“ buvo įkeltas, tačiau kai kurios reikšmės nebuvo atpažintos." msgid "Loading configuration" msgstr "Įkeliama konfigūracija" msgid "STEP files" msgstr "STEP failai" msgid "STL files" msgstr "STL failai" msgid "OBJ files" msgstr "OBJ failai" msgid "AMF files" msgstr "AMF failai" msgid "3MF files" msgstr "3MF failai" msgid "G-code 3MF files" msgstr "G-code 3MF failai" msgid "G-code files" msgstr "G-code failai" msgid "Supported files" msgstr "Palaikomi failai" msgid "ZIP files" msgstr "ZIP failai" msgid "Project files" msgstr "Projekto failai" msgid "Known files" msgstr "Žinomi failai" msgid "INI files" msgstr "INI failai" msgid "SVG files" msgstr "SVG failai" msgid "Texture" msgstr "Tekstūra" msgid "Masked SLA files" msgstr "Maskuoti SLA failai" msgid "Draco files" msgstr "Draco failai" msgid "OrcaSlicer will terminate because of running out of memory. It may be a bug. It will be appreciated if you report the issue to our team." msgstr "„OrcaSlicer“ darbas bus nutrauktas, nes pritrūko atminties. Tai gali būti programos klaida. Būtume dėkingi, jei praneštumėte apie šią problemą mūsų komandai." msgid "Fatal error" msgstr "Lemtinga klaida" msgid "OrcaSlicer will terminate because of a localization error. It will be appreciated if you report the specific scenario this issue happened." msgstr "„OrcaSlicer“ darbas bus nutrauktas dėl lokalizacijos (vertimo) klaidos. Būtume dėkingi, jei praneštumėte, kokiomis aplinkybėmis ši problema iškilo." msgid "Critical error" msgstr "Kritinė klaida" #, boost-format msgid "OrcaSlicer got an unhandled exception: %1%" msgstr "„OrcaSlicer“ gavo neapdorotą išimtį: %1%" msgid "Untitled" msgstr "Be pavadinimo" msgid "" "Since version 2.4.0, OrcaSlicer syncs user profiles through Orca Cloud instead of Bambu Cloud.\n" "\n" "To migrate your existing profiles, log in to Orca Cloud and they will be transferred automatically. To learn more about how OrcaSlicer stores and syncs your profiles, or to migrate your presets manually, check out our wiki.\n" "\n" "If you did not use Bambu Cloud to sync profiles, this change does not affect you and you can safely ignore this message." msgstr "" "Nuo 2.4.0 versijos OrcaSlicer sinchronizuoja naudotojo profilius per Orca Cloud, o ne Bambu Cloud.\n" "\n" "Norėdami perkelti esamus profilius, prisijunkite prie Orca Cloud ir jie bus perkelti automatiškai. Norėdami sužinoti daugiau apie tai, kaip OrcaSlicer saugo ir sinchronizuoja jūsų profilius, arba norėdami perkelti profilius rankiniu būdu, apsilankykite mūsų wiki.\n" "\n" "Jei profiliams sinchronizuoti nenaudojote Bambu Cloud, šis pakeitimas jums neaktualus ir šį pranešimą galite ignoruoti." msgid "Profile syncing change" msgstr "Profilio sinchronizavimo pakeitimas" msgid "Learn more" msgstr "Sužinokite daugiau" msgid "Reloading network plug-in..." msgstr "Tinklo papildinys įkeliamas iš naujo..." msgid "Downloading Network Plug-in" msgstr "Atsisiunčiamas tinklo papildinys" msgid "Downloading Bambu Network Plug-in" msgstr "Siunčiamas Bambu tinklo papildinys" msgid "Login information expired. Please login again." msgstr "Prisijungimo seansas pasibaigė. Prašome prisijungti iš naujo." msgid "Incorrect password" msgstr "Neteisingas slaptažodis" #, c-format, boost-format msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Nepavyko %s prisijungimas! [SN:%s, kodas=%s]" msgid "" "Orca Slicer requires the Microsoft WebView2 Runtime to operate certain features.\n" "Click Yes to install it now." msgstr "" "Norint naudoti kai kurias „OrcaSlicer“ funkcijas, reikalinga „Microsoft WebView2 Runtime“.\n" "Spustelėkite „Taip“, kad ją įdiegtumėte dabar." msgid "WebView2 Runtime" msgstr "„WebView2“ paleidimo terpė" msgid "" "The Microsoft WebView2 Runtime could not be installed.\n" "Some features, including the setup wizard, may appear blank until it is installed.\n" "Please install it manually from https://developer.microsoft.com/microsoft-edge/webview2/ and restart Orca Slicer." msgstr "" "Nepavyko įdiegti „Microsoft WebView2 Runtime“.\n" "Kol tai nebus įdiegta, kai kurios funkcijos, įskaitant diegimo vedlį, gali būti tuščios.\n" "Prašome įdiegti rankiniu būdu iš https://developer.microsoft.com/microsoft-edge/webview2/ ir iš naujo paleisti „Orca Slicer“." #, c-format, boost-format msgid "Resources path does not exist or is not a directory: %s" msgstr "Išteklių kelias neegzistuoja arba nėra katalogas: %s" #, c-format, boost-format msgid "" "%s\n" "Do you want to continue?" msgstr "" "%s\n" "Ar norite tęsti?" msgid "Remember my choice" msgstr "Prisiminti mano pasirinkimą" #, c-format, boost-format msgid "Click to download new version in default browser: %s" msgstr "Spustelėkite, kad atsisiųstumėte naują versiją numatytoje naršyklėje: %s" msgid "OrcaSlicer needs an update" msgstr "„OrcaSlicer“ programą reikia atnaujinti" msgid "This is the newest version." msgstr "Čia yra naujausia versija." msgid "Info" msgstr "Informacija" # AI Translated msgid "Loading Plugins" msgstr "Įkeliami papildiniai" # AI Translated #, c-format, boost-format msgid "Plugin %s is no longer available." msgstr "Papildinys %s nebeprieinamas." # AI Translated #, c-format, boost-format msgid "Plugin %s access is unauthorized." msgstr "Papildinio %s prieiga neautorizuota." msgid "Loading printer & filament profiles" msgstr "Įkeliami spausdintuvo ir gijų profiliai" msgid "Creating main window" msgstr "Kuriamas pagrindinis langas" msgid "Loading current preset" msgstr "Įkeliamas esamas profilis" msgid "Showing main window" msgstr "Rodomas pagrindinis langas" msgid "" "The OrcaSlicer configuration file may be corrupted and cannot be parsed.\n" "OrcaSlicer has attempted to recreate the configuration file.\n" "Please note, application settings will be lost, but printer profiles will not be affected." msgstr "" "„OrcaSlicer“ konfigūracijos failas gali būti sugadintas, jo nepavyksta apdoroti.\n" "„OrcaSlicer“ bandė sukurti konfigūracijos failą iš naujo.\n" "Atkreipkite dėmesį, kad programos nustatymai bus prarasti, \n" "tačiau tai neturės įtakos spausdintuvo profiliams." msgid "Rebuild" msgstr "Perkurti" msgid "Loading current presets" msgstr "Įkeliami esami profiliai" msgid "Loading a mode view" msgstr "Įkeliamas režimo rodinys" msgid "Choose one file (3MF):" msgstr "Pasirinkite vieną failą (3MF):" msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY):" msgstr "Pasirinkite vieną ar kelis failus (3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY):" msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF):" msgstr "Pasirinkite vieną ar kelis failus (3MF/STEP/STL/SVG/OBJ/AMF):" msgid "Choose ZIP file" msgstr "Pasirinkite ZIP failą" msgid "Choose one file (GCODE/3MF):" msgstr "Pasirinkite vieną failą (GCODE/3MF):" msgid "Ext" msgstr "Ext" msgid "Some presets are modified." msgstr "Kai kurie profiliai yra modifikuoti." msgid "You can keep the modified presets for the new project, discard, or save changes as new presets." msgstr "Modifikuotus profilius galite išlaikyti naujame projekte, atmesti pakeitimus arba išsaugoti juos kaip naujus profilius." msgid "User logged out" msgstr "Naudotojas atsijungė" msgid "You are currently in Stealth Mode. To log into the Cloud, you need to disable Stealth Mode first." msgstr "Šiuo metu esate slaptame („Stealth“) režime. Norėdami prisijungti prie debesies, pirmiausia turite išjungti „Stealth“ režimą." msgid "Stealth Mode" msgstr "Slaptasis (Stealth) režimas" msgid "Quit Stealth Mode" msgstr "Išjungti „Stealth“ režimą" msgid "new or open project file is not allowed during the slicing process!" msgstr "Kurti ar atidaryti naujo projekto failo sluoksniavimo (slicing) metu negalima!" msgid "Open Project" msgstr "Atidaryti projektą" msgid "The version of Orca Slicer is too low and needs to be updated to the latest version before it can be used normally." msgstr "OrcaSlicer versija yra pasenusi. Norint naudotis, reikia ją atnaujinti į naujausią versiją." msgid "Cloud sync conflict:" msgstr "Sinchronizavimo su debesimi konfliktas:" #, c-format, boost-format msgid "Cloud sync conflict for preset \"%s\":" msgstr "Debesų sinchronizavimo konfliktas, susijęs su profiliu „%s“:" msgid "" "This preset has a newer version in OrcaCloud.\n" "Pull downloads the cloud copy. Force push overwrites it with your local preset." msgstr "" "„OrcaCloud“ yra naujesnė šio profilio versija.\n" "Naudodami „Pull“ atsisiųsite kopiją iš debesies. Naudodami „Force push“ ją perrašysite savo vietiniu nustatymu." msgid "" "A preset with this name already exists in OrcaCloud.\n" "Pull downloads the cloud copy. Force push overwrites it with your local preset." msgstr "" "Tokiu pavadinimu profilis „OrcaCloud“ debesyje jau egzistuoja. \n" "„Atsisiųsti“ (Pull) parsiunčia debesyje esančią kopiją. \n" "„Priverstinis nusiuntimas“ (Force push) perrašo ją jūsų vietiniu profiliu." msgid "" "A preset with the same name was previously deleted from the cloud.\n" "Delete will delete your local preset. Force push overwrites it with your local preset." msgstr "" "Profilis tokiu pačiu pavadinimu anksčiau buvo ištrintas iš debesies. \n" "„Ištrinti“ (Delete) pašalins jūsų vietinį profilį. „Priverstinis nusiuntimas“ (Force push) perrašo jį jūsų vietiniu profiliu." msgid "" "There was an unexpected or unidentified preset conflict.\n" "Pull downloads the cloud copy. Force push overwrites it with your local preset." msgstr "" "Įvyko netikėtas arba neidentifikuotas profilio konfliktas. \n" "„Atsisiųsti“ (Pull) parsiunčia debesyje esančią kopiją. „Priverstinis nusiuntimas“ (Force push) perrašo ją jūsų vietiniu profiliu." msgid "" "Force push will overwrite the cloud copy with your local preset changes.\n" "Do you want to continue?" msgstr "" "Naudojant „Force Push“ („Priverstinai įkelti“) funkciją, debesies kopija bus perrašyta jūsų vietiniais profilių pakeitimais.\n" "Ar norite tęsti?" #, c-format, boost-format msgid "" "Force push will overwrite the cloud copy of preset \"%s\" with your local changes.\n" "Do you want to continue?" msgstr "" "Naudojant „Force Push“ („Priverstinai įkelti“) funkciją, debesies profilio \"%s\" kopija bus perrašyta jūsų vietiniais profilių pakeitimais.\n" "Ar norite tęsti?" msgid "Resolve cloud sync conflict" msgstr "Išspręsti debesų sinchronizavimo konfliktą" # AI Translated msgid "Syncing your account…" msgstr "Sinchronizuojama jūsų paskyra…" # AI Translated msgid "Migrating presets…" msgstr "Perkeliami profiliai…" # AI Translated msgid "Fetching plugins…" msgstr "Gaunami papildiniai…" # AI Translated msgid "Loading user presets…" msgstr "Įkeliami naudotojo profiliai…" msgid "Retrieving printer information, please try again later." msgstr "Gaunama spausdintuvo informacija, bandykite vėliau." msgid "Please try updating OrcaSlicer and then try again." msgstr "Atnaujinkite „OrcaSlicer“ programą ir bandykite dar kartą." msgid "The certificate has expired. Please check the time settings or update OrcaSlicer and try again." msgstr "Sertifikato galiojimas baigėsi. Patikrinkite laiko nustatymus arba atnaujinkite „OrcaSlicer“ ir bandykite dar kartą." msgid "The certificate is no longer valid and the printing functions are unavailable." msgstr "Sertifikatas nebegalioja, todėl spausdinimo funkcijos neprieinamos." msgid "Internal error. Please try upgrading the firmware and OrcaSlicer version. If the issue persists, contact support." msgstr "Vidinė klaida. Pabandykite atnaujinti aparatinę programinę įrangą (firmware) ir „OrcaSlicer“ versiją. Problemai išlikus, susisiekite su palaikymo komanda." msgid "" "To use OrcaSlicer with Bambu Lab printers, you need to enable LAN mode and Developer mode on your printer.\n" "\n" "Please go to your printer's settings and:\n" "1. Turn on LAN mode\n" "2. Enable Developer mode\n" "\n" "Developer mode allows the printer to work exclusively through local network access, enabling full functionality with OrcaSlicer." msgstr "" "Norėdami naudoti „OrcaSlicer“ su „Bambu Lab“ spausdintuvais, spausdintuve turite įjungti LAN režimą ir kūrėjo (Developer) režimą.\n" "\n" "Eikite į spausdintuvo nustatymus ir:\n" "1. Įjunkite LAN režimą\n" "2. Įjunkite kūrėjo (Developer) režimą\n" "\n" "Kūrėjo režimas leidžia spausdintuvui veikti išskirtinai per vietinį tinklą, užtikrinant visišką funkcionalumą su „OrcaSlicer“." msgid "Network Plug-in Restriction" msgstr "Tinklo papildinio ribojimas" msgid "Privacy Policy Update" msgstr "Privatumo politikos atnaujinimas" #, c-format, boost-format msgid "your Orca Cloud profile (user ID: \"%s\")" msgstr "jūsų „Orca Cloud“ profilis (vartotojo ID: „%s“)" msgid "your default profile" msgstr "jūsų numatytasis profilis" #, c-format, boost-format msgid "a user profile (folder: \"%s\")" msgstr "vartotojo profilis (aplankas: „%s“)" #, c-format, boost-format msgid "" "Existing user presets were found in %s.\n" "Do you want to migrate them to your OrcaCloud profile?\n" "This will copy your presets so they are available under your new account." msgstr "" "%s rasti esami naudotojo profiliai.\n" "Ar norite juos perkelti į savo „OrcaCloud“ profilį? \n" "Tai nukopijuos jūsų profilius, kad jie būtų prieinami jūsų naujoje paskyroje." msgid "Migrate User Presets" msgstr "Perkelti naudotojo profilius" #, c-format, boost-format msgid "" "Failed to migrate user presets:\n" "%s" msgstr "" "Nepavyko perkelti naudotojo profilių:\n" "%s" msgid "The number of user presets cached in the cloud has exceeded the upper limit, newly created user presets can only be used locally." msgstr "Pasiektas debesyje saugomų naudotojo profilių limitas. Naujai sukurti naudotojo profiliai bus prieinami tik šiame įrenginyje." msgid "Sync user presets" msgstr "Sinchronizuoti naudotojo profilius" #, c-format, boost-format msgid "The preset \"%s\" is too large to sync to the cloud (exceeds 1MB). Please reduce the preset size by removing custom configurations or use it locally only." msgstr "Profilio \"%s\" turinys yra per didelis, kad būtų galima sinchronizuoti su debesimi (viršija 1 MB). Prašome sumažinti profilio dydį, pašalinant pasirinktinius nustatymus, arba jį naudoti tik lokaliai." #, c-format, boost-format msgid "%s updated from %s to %s" msgstr "%s atnaujinta iš %s į %s" #, c-format, boost-format msgid "%s has been downloaded." msgstr "%s buvo atsisiųstas." #, c-format, boost-format msgid "Bundle %s is no longer available." msgstr "Rinkinys %s nebeprieinamas." #, c-format, boost-format msgid "Bundle %s access is unauthorized." msgstr "Prieiga prie rinkinio %s nesuteikta." msgid "Loading user preset" msgstr "Įkeliamas naudotojo profilis" # AI Translated msgid "There is an update available. Open the preset bundle dialog to update it." msgstr "Yra prieinamas atnaujinimas. Atidarykite profilių paketo dialogo langą, kad jį atnaujintumėte." #, c-format, boost-format msgid "%s has been removed." msgstr "%s buvo pašalintas." msgid "Switching application language" msgstr "Perjungiama programos kalba" msgid "Select the language" msgstr "Pasirinkite kalbą" msgid "Language" msgstr "Kalba" # AI Translated #, c-format, boost-format msgid "Switching Orca Slicer to language %s failed." msgstr "Nepavyko perjungti Orca Slicer į kalbą %s." # AI Translated msgid "" "\n" "You may need to reconfigure the missing locales, likely by running the \"locale-gen\" and \"dpkg-reconfigure locales\" commands.\n" msgstr "" "\n" "Gali tekti iš naujo sukonfigūruoti trūkstamas lokales, greičiausiai paleidus komandas „locale-gen“ ir „dpkg-reconfigure locales“.\n" # AI Translated msgid "Orca Slicer - Switching language failed" msgstr "Orca Slicer – kalbos perjungimas nepavyko" msgid "*" msgstr "*" # AI Translated msgid "Plugins" msgstr "Papildiniai" # AI Translated #, c-format, boost-format msgid "" "Failed to open the Plugins dialog:\n" "%s" msgstr "" "Nepavyko atidaryti papildinių dialogo lango:\n" "%s" # AI Translated msgid "Failed to open the Plugins dialog (unknown error)." msgstr "Nepavyko atidaryti papildinių dialogo lango (nežinoma klaida)." # AI Translated msgid "Plugin Terminal" msgstr "Papildinio terminalas" msgid "Changing application language" msgstr "Keičiama programos kalba" msgid "The uploads are still ongoing" msgstr "Įkėlimai vis dar vyksta" msgid "Stop them and continue anyway?" msgstr "Sustabdyti juos ir vis tiek tęsti?" msgid "Ongoing uploads" msgstr "Vykdomi įkėlimai" msgid "Select a G-code file:" msgstr "Pasirinkite G-kodo failą:" msgid "Could not start URL download. Destination folder is not set. Please choose destination folder in Configuration Wizard." msgstr "Nepavyko pradėti atsisiuntimo iš interneto adreso. Nėra nurodytas paskirties aplankas. Pasirinkite paskirties aplanką konfigūracijos vedlyje." msgid "Import File" msgstr "Importuoti failą" msgid "Delete" msgstr "Ištrinti" msgid "Choose files" msgstr "Pasirinkite failus" msgid "New Folder" msgstr "Naujas katalogas" msgid "Open" msgstr "Atverti" msgid "Rename" msgstr "Pervardyti" msgid "Orca Slicer GUI initialization failed" msgstr "Nepavyko inicijuoti „OrcaSlicer“ grafinės naudotojo sąsajos" #, boost-format msgid "Fatal error, exception: %1%" msgstr "Lemtingoji klaida, sugauta išimtis: %1%" msgid "Quality" msgstr "Kokybė" msgid "Shell" msgstr "Apvalkalas" msgid "Infill" msgstr "Užpildas" msgid "Support" msgstr "Atramos" msgid "Flush options" msgstr "Gijos išvalymo nustatymai" msgid "Speed" msgstr "Greitis" msgid "Strength" msgstr "Stiprumas" msgid "Top solid layers" msgstr "Viršutiniai vientisi sluoksniai" msgid "Top minimum shell thickness" msgstr "Mažiausias viršutinio apvalkalo storis" msgid "Top Surface Density" msgstr "Viršutinio paviršiaus tankis" msgid "Bottom solid layers" msgstr "Apatiniai vientisi sluoksniai" msgid "Bottom minimum shell thickness" msgstr "Mažiausias apatinio apvalkalo storis" msgid "Bottom Surface Density" msgstr "Apatinio paviršiaus tankis" msgid "Ironing" msgstr "Lyginimas" msgid "Fuzzy skin" msgstr "Grublėtas paviršius" msgid "Extruders" msgstr "Ekstruderiai (stumtuvai)" msgid "Extrusion width" msgstr "Išspaudimo plotis" msgid "Wipe options" msgstr "Valymo parinktys" msgid "Bed adhesion" msgstr "Sukibimas su pagrindu" msgid "Add Part" msgstr "Pridėti detalę" msgid "Add Negative Part" msgstr "Pridėti neigiamą elementą" msgid "Add Modifier" msgstr "Pridėti modifikatorių" msgid "Add Support Blocker" msgstr "Pridėti atramų blokatorių" msgid "Add Support Enforcer" msgstr "Pridėti priverstines atramas" msgid "Add text" msgstr "Pridėti tekstą" msgid "Add negative text" msgstr "Pridėti neigiamą tekstą" msgid "Add text modifier" msgstr "Pridėti teksto modifikatorių" msgid "Add SVG part" msgstr "Pridėti SVG detalę" msgid "Add negative SVG" msgstr "Pridėti neigiamą SVG" msgid "Add SVG modifier" msgstr "Pridėti SVG modifikatorių" msgid "Select settings" msgstr "Pasirinkti nustatymus" msgid "Hide" msgstr "Paslėpti" msgid "Show" msgstr "Rodyti" # AI Translated msgctxt "Keyboard Shortcut" msgid "Del" msgstr "Del" msgid "Delete the selected object" msgstr "Ištrinti pasirinktą objektą" # AI Translated msgctxt "Keyboard Shortcut" msgid "Backspace" msgstr "Backspace" msgid "Load..." msgstr "Įkelti..." msgid "Cube" msgstr "Kubas" msgid "Cylinder" msgstr "Cilindras" msgid "Cone" msgstr "Kūgis" msgid "Disc" msgstr "Diskas" msgid "Torus" msgstr "Toras" msgid "Orca Cube" msgstr "Orca kubas" msgid "OrcaSliced Combo" msgstr "„OrcaSliced“ rinkinys" msgid "Orca Badge" msgstr "„Orca“ ženklelis" msgid "Orca Tolerance Test" msgstr "„Orca“ tarpų (tolerancijos) testas" msgid "3DBenchy" msgstr "3DBenchy" msgid "Cali Cat" msgstr "Cali Cat" msgid "Autodesk FDM Test" msgstr "Autodesk FDM testas" msgid "Voron Cube" msgstr "Vorono kubas" msgid "Stanford Bunny" msgstr "Stanfordo triušis" msgid "Orca String Hell" msgstr "Orca stygų testas" msgid "" "This model features text embossment on the top surface. For optimal results, it is advisable to set the 'One Wall Threshold (min_width_top_surface)' to 0 for the 'Only One Wall on Top Surfaces' to work best.\n" "Yes - Change these settings automatically\n" "No - Do not change these settings for me" msgstr "" "Šiame modelyje viršutinio paviršiaus tekstas yra išgaubtas. Norint pasiekti optimalų rezultatą, rekomenduojama nustatyti „Vienos sienelės slenkstį (minimalus viršutinio paviršiaus plotis)“ į 0, kad funkcija „Tik viena sienelė viršutiniuose paviršiuose“ veiktų geriausiai.\n" "\n" "Taip - Pakeisti šiuos nustatymus automatiškai\n" "Ne - Nekeisti šių nustatymų" msgid "Suggestion" msgstr "Rekomendacija" msgid "Text" msgstr "Tesktas" msgid "Height Range Modifier" msgstr "Aukščio diapazono modifikatorius" msgid "Add Settings" msgstr "Pridėti nustatymus" msgid "Change Type" msgstr "Keisti tipą" msgid "Negative Part" msgstr "Neigiama dalis" msgid "Support Blocker" msgstr "Atramų blokatorius" msgid "Support Enforcer" msgstr "Priverstinės atramos" msgid "Change part type" msgstr "Pakeisti detalės tipą" msgid "Set as An Individual Object" msgstr "Nustatyti kaip atskirą objektą" msgid "Set as Individual Objects" msgstr "Nustatyti kaip atskirus objektus" msgid "Fill bed with copies" msgstr "Užpildyti pagrindą kopijomis" msgid "Fill the remaining area of bed with copies of the selected object" msgstr "Užpildyti likusią pagrindo vietą pasirinkto objekto kopijomis" msgid "Printable" msgstr "Galima spausdinti" msgid "Auto Drop" msgstr "Automatinis nuleidimas" msgid "Automatically drops the selected object to the build plate." msgstr "Automatiškai nuleidžia pasirinktą objektą ant spausdinimo plokštės" # AI Translated msgid "Fix Model" msgstr "Taisyti modelį" msgid "Export as one STL" msgstr "Eksportuoti kaip vieną STL" msgid "Export as STLs" msgstr "Eksportuoti kaip kelis STL" msgid "Export as one DRC" msgstr "Eksportuoti kaip vieną DRC" msgid "Export as DRCs" msgstr "Eksportuoti kaip DRC failus" msgid "Reload from disk" msgstr "Iš naujo įkelti iš disko" msgid "Reload the selected parts from disk" msgstr "Iš naujo įkelti pasirinktas detales iš disko" msgid "Replace 3D file" msgstr "Pakeisti 3D failą" msgid "Replace the selected part with a new 3D file" msgstr "Pakeisti pasirinktą detalę nauju 3D failu" msgid "Replace all with 3D files" msgstr "Viską pakeisti 3D failais" msgid "Replace all selected parts with 3D files from folder" msgstr "Pakeisti visas pasirinktas detales 3D failais iš aplanko" msgid "Change filament" msgstr "Pakeisti giją" msgid "Set filament for selected items" msgstr "Nustatyti giją pasirinktiems elementams" msgid "Default" msgstr "Numatytasis" #, c-format, boost-format msgid "Filament %d" msgstr "Gija %d" msgid "current" msgstr "dabartinė" msgid "Scale to build volume" msgstr "Keisti mastelį pagal spausdinimo tūrį" msgid "Scale an object to fit the build volume" msgstr "Keisti objekto mastelį, kad tilptų spausdinimo tūryje" msgid "Flush Options" msgstr "Gijos išvalymo nustatymai" msgid "Flush into objects' infill" msgstr "Išvalyti į objektų užpildą" msgid "Flush into this object" msgstr "Išvalyti į šį objektą" msgid "Flush into objects' support" msgstr "Išvalyti į objektų atramas" msgid "Edit in Parameter Table" msgstr "Taisyti Parametrų lentelėje" msgid "Convert from Inches" msgstr "Konvertuoti iš colių" msgid "Restore to Inch" msgstr "Grąžinti į colius" msgid "Convert from Meters" msgstr "Konvertuoti iš metrų" msgid "Restore to Meter" msgstr "Grąžinti į metrus" msgid "Assemble" msgstr "Surinkti" msgid "Assemble the selected objects into an object with multiple parts" msgstr "Sujungti pasirinktus objektus į objektą iš kelių detalių" msgid "Assemble the selected objects into an object with single part" msgstr "Sujungti pasirinktus objektus į objektą iš vienos detalės" msgid "Mesh boolean" msgstr "Poligoninių tinklų logikos (Boolean) operacijos" msgid "Mesh boolean operations including union and subtraction" msgstr "Logikos (Boolean) operacijos, įskaitant sujungimą ir atimtį" msgid "Along X Axis" msgstr "Išilgai X ašies" msgid "Mirror along the X Axis" msgstr "Atspindėti pagal X ašį" msgid "Along Y Axis" msgstr "Išilgai Y ašies" msgid "Mirror along the Y Axis" msgstr "Atspindėti pagal Y ašį" msgid "Along Z Axis" msgstr "Išilgai Z ašies" msgid "Mirror along the Z Axis" msgstr "Atspindėti pagal Z ašį" msgid "Mirror object" msgstr "Atspindėti objektą" msgid "Edit text" msgstr "Teksto taisymas" msgid "Ability to change text, font, size, ..." msgstr "Galimybė keisti tekstą, šriftą, dydį..." msgid "Edit SVG" msgstr "Taisyti SVG" msgid "Change SVG source file, projection, size, ..." msgstr "Keičiamas SVG šaltinis, projekcija, dydis..." msgid "Invalidate cut info" msgstr "Panaikinti pjovimo informacijos galiojimą" msgid "Add Primitive" msgstr "Pridėti primityvą" msgid "Add Handy models" msgstr "Pridėti patogius modelius" msgid "Add Models" msgstr "Pridėti modelius" msgid "Show Labels" msgstr "Rodyti etiketes" msgid "To Objects" msgstr "Į objektus" msgid "Split the selected object into multiple objects" msgstr "Suskaidyti pasirinktą objektą į kelis objektus" msgid "To Parts" msgstr "Į dalis" msgid "Split the selected object into multiple parts" msgstr "Skaidyti pasirinktą objektą į kelias detales" msgid "Split" msgstr "Padalinti" msgid "Split the selected object" msgstr "Padalinti pasirinktą objektą" msgid "Auto orientation" msgstr "Automatinė padėtis" msgid "Auto orient the object to improve print quality" msgstr "Automatiškai nustatoma padėtis spausdinimo kokybės pagerinimui" msgid "Edit" msgstr "Redaguoti" msgid "Merge with" msgstr "Sujungti su" msgid "Delete this filament" msgstr "Ištrinti šią giją" msgid "Select All" msgstr "Pasirinkti viską" msgid "Select all objects on the current plate" msgstr "Pasirinkti visus objektus dabartinėje plokštėje" msgid "Select All Plates" msgstr "Pasirinkti visas plokštes" msgid "Select all objects on all plates" msgstr "Pasirinkti visus objektus visose plokštėse" msgid "Delete All" msgstr "Ištrinti visus" msgid "Delete all objects on the current plate" msgstr "Ištrinti visus objektus dabartinėje plokštėje" msgid "Arrange" msgstr "Išdėstyti" msgid "Arrange current plate" msgstr "Išdėstyti dabartinės plokštės objektus" msgid "Reload All" msgstr "Įkelti viską iš naujo" msgid "Reload all from disk" msgstr "Įkelti viską iš naujo iš disko" msgid "Auto Rotate" msgstr "Automatinis pasukimas" msgid "Auto rotate current plate" msgstr "Automatiškai pasukti dabartinę plokštę" msgid "Delete Plate" msgstr "Ištrinti plokštę" msgid "Remove the selected plate" msgstr "Pašalinti pasirinktą plokštę" msgid "Add instance" msgstr "Pridėti kopiją (kopiją-atvaizdą)" msgid "Add one more instance of the selected object" msgstr "Pridėti dar vieną pasirinkto objekto kopiją" msgid "Remove instance" msgstr "Pašalinti kopiją" msgid "Remove one instance of the selected object" msgstr "Pašalinti vieną pasirinkto objekto kopiją" msgid "Set number of instances" msgstr "Nustatyti kopijų skaičių" msgid "Change the number of instances of the selected object" msgstr "Keisti pasirinkto objekto kopijų skaičių" msgid "Fill bed with instances" msgstr "Užpildyti pagrindą kopijomis" msgid "Fill the remaining area of bed with instances of the selected object" msgstr "Užpildyti likusią pagrindo vietą pasirinkto objekto kopijomis" msgid "Clone" msgstr "Klonuoti" msgid "Simplify Model" msgstr "Supaprastinti modelį" msgid "Subdivision mesh" msgstr "Skaidomas paviršius" msgid "(Lost color)" msgstr "(Prarasta spalva)" msgid "Center" msgstr "Centras" msgid "Drop" msgstr "Nuleisti" msgid "Edit Process Settings" msgstr "Taisyti proceso nustatymus" msgid "Copy Process Settings" msgstr "Kopijuoti proceso nustatymus" msgid "Paste Process Settings" msgstr "Įklijuoti proceso nustatymus" msgid "Edit print parameters for a single object" msgstr "Taisyti atskiro objekto spausdinimo parametrus" msgid "Change Filament" msgstr "Keisti giją" msgid "Set Filament for selected items" msgstr "Nustatyti giją pasirinktiems elementams" msgid "Automatically snaps the selected object to the build plate." msgstr "Automatiškai pritraukia pasirinktą objektą prie spausdinimo plokštės" msgid "Unlock" msgstr "Atrakinti" msgid "Lock" msgstr "Užrakinti" msgid "Edit Plate Name" msgstr "Taisyti plokštės pavadinimą" msgid "Name" msgstr "Pavadinimas" msgid "Fila." msgstr "Gija" #, c-format, boost-format msgid "%1$d error repaired" msgid_plural "%1$d errors repaired" msgstr[0] "Ištaisyta %1$d klaida" msgstr[1] "Ištaisytos %1$d klaidos" msgstr[2] "Ištaisyta %1$d klaidų" #, c-format, boost-format msgid "Error: %1$d non-manifold edge." msgid_plural "Error: %1$d non-manifold edges." msgstr[0] "Klaida: %1$d ne daugialypė (non-manifold) briauna." msgstr[1] "Klaida: %1$d ne daugialypės (non-manifold) briaunos." msgstr[2] "Klaida: %1$d ne daugialypių (non-manifold) briaunų." msgid "Remaining errors" msgstr "Likusios klaidos" #, c-format, boost-format msgid "%1$d non-manifold edge" msgid_plural "%1$d non-manifold edges" msgstr[0] "%1$d ne daugialypė (non-manifold) briauna" msgstr[1] "%1$d ne daugialypės (non-manifold) briaunos" msgstr[2] "%1$d ne daugialypių (non-manifold) briaunų" msgid "Click the icon to repair model object" msgstr "Spustelėkite piktogramą, kad pataisytumėte modelio objektą" msgid "Right click the icon to drop the object settings" msgstr "Spustelėkite piktogramą dešiniuoju pelės mygtuku, kad atmestumėte objekto nustatymus" msgid "Click the icon to reset all settings of the object" msgstr "Spustelėkite piktogramą, kad atstatytumėte visus objekto nustatymus" msgid "Right click the icon to drop the object printable property" msgstr "Spustelėkite piktogramą dešiniuoju pelės mygtuku, kad panaikintumėte objekto spausdinimo savybę" msgid "Click the icon to toggle printable properties of the object" msgstr "Spustelėkite piktogramą, kad įjungtumėte / išjungtumėte objekto spausdinimo galimybę" msgid "Click the icon to edit support painting of the object" msgstr "Spustelėkite piktogramą, kad redaguotumėte objekto atramų piešimą" msgid "Click the icon to edit color painting for the object" msgstr "Spustelėkite piktogramą, kad redaguotumėte objekto spalvinimą" msgid "Click the icon to shift this object to the bed" msgstr "Spustelėkite piktogramą, kad perkeltumėte šį objektą ant pagrindo" # AI Translated msgid "Rename Object" msgstr "Pervadinti objektą" # AI Translated msgid "Rename Part" msgstr "Pervadinti dalį" # AI Translated msgid "Paste settings" msgstr "Įklijuoti nustatymus" # AI Translated msgid "Shift objects to bed" msgstr "Perkelti objektus ant pagrindo" # AI Translated msgid "Object order changed" msgstr "Objektų tvarka pakeista" # AI Translated msgid "Layer setting added" msgstr "Pridėtas sluoksnio nustatymas" # AI Translated msgid "Part setting added" msgstr "Pridėtas dalies nustatymas" # AI Translated msgid "Object setting added" msgstr "Pridėtas objekto nustatymas" # AI Translated msgid "Height range settings added" msgstr "Pridėti aukščio diapazono nustatymai" # AI Translated msgid "Part settings added" msgstr "Pridėti dalies nustatymai" # AI Translated msgid "Object settings added" msgstr "Pridėti objekto nustatymai" # AI Translated msgid "Load Part" msgstr "Įkelti dalį" # AI Translated msgid "Load Modifier" msgstr "Įkelti modifikatorių" msgid "Loading file" msgstr "Įkeliamas failas" msgid "Error!" msgstr "Klaida!" msgid "Failed to get the model data in the current file." msgstr "Nepavyko gauti modelio duomenų iš dabartinio failo." # AI Translated msgid "Add primitive" msgstr "Pridėti primityvą" msgid "Generic" msgstr "Bendras" msgid "Switch to per-object setting mode to edit modifier settings." msgstr "Norėdami redaguoti modifikatoriaus nustatymus, persijunkite į objektų atskirų nustatymų režimą." msgid "Switch to per-object setting mode to edit process settings of selected objects." msgstr "Norėdami redaguoti pasirinktų objektų spausdinimo parametrus, persijunkite į objektų atskirų nustatymų režimą." msgid "Remove paint-on fuzzy skin" msgstr "Pašalinti pieštą grublėtą paviršių" # AI Translated msgid "Delete Settings" msgstr "Ištrinti nustatymus" msgid "Remove height range" msgstr "Pašalinti aukščio ribas" msgid "Delete connector from object which is a part of cut" msgstr "Pašalinkite jungtį nuo objekto, kuris yra pjūvio dalis" msgid "Delete solid part from object which is a part of cut" msgstr "Ištrinti geometrinę detalę iš objekto, kuris yra pjūvio dalis" msgid "Delete negative volume from object which is a part of cut" msgstr "Pašalinkite neigiamą tūrį iš pjūvyje esančio objekto" msgid "To save cut correspondence you can delete all connectors from all related objects." msgstr "Norėdami nutraukti ryšius, galite ištrinti visus jungtis iš visų susijusių objektų." msgid "" "This action will break a cut correspondence.\n" "After that, model consistency can't be guaranteed.\n" "\n" "To manipulate with solid parts or negative volumes you have to invalidate cut information first." msgstr "" "Šis veiksmas nutrauks pjūvių susietumą.\n" "Po to modelio vientisumas negali būti garantuotas.\n" "\n" "Norėdami manipuliuoti geometrinėmis detalėmis arba neigiamais tūriais, pirmiausia turite panaikinti pjovimo informacijos galiojimą." msgid "Delete all connectors" msgstr "Ištrinti visas jungtis" msgid "Deleting the last solid part is not allowed." msgstr "Neleidžiama ištrinti paskutinės geometrinės detalės." # AI Translated msgid "Delete part" msgstr "Ištrinti dalį" msgid "The target object contains only one part and can not be split." msgstr "Tikslinis objektas turi tik vieną detalę ir negali būti išskaidytas." msgid "Split to parts" msgstr "Padalinti į dalis" msgid "Assembly" msgstr "Surinkimas" # AI Translated msgid "Merge parts to an object" msgstr "Sujungti dalis į objektą" # AI Translated msgid "Add layers" msgstr "Pridėti sluoksnių" msgid "Cut Connectors information" msgstr "Pjovimo jungčių informacija" msgid "Object manipulation" msgstr "Manipuliavimas objektu" msgid "Group manipulation" msgstr "Manipuliavimas grupe" msgid "Object Settings to Modify" msgstr "Keičiami objekto parametrai" msgid "Part Settings to Modify" msgstr "Keičiami detalės parametrai" msgid "Layer Range Settings to Modify" msgstr "Keičiami sluoksnių ribų nustatymai" msgid "Part manipulation" msgstr "Manipuliavimas detale" msgid "Instance manipulation" msgstr "Manipuliavimas kopija" msgid "Height ranges" msgstr "Aukščio diapazonai" msgid "Settings for height range" msgstr "Aukščio diapazono nustatymai" msgid "Delete selected" msgstr "Ištrinti pasirinkimą" msgid "Layer" msgstr "Sluoksnis" msgid "Selection conflicts" msgstr "Pasirinkimo konfliktai" msgid "If the first selected item is an object, the second should also be an object." msgstr "Jei pirmasis pasirinktas elementas yra objektas, tuomet ir antrasis privalo būti objektas." msgid "If the first selected item is a part, the second should be a part in the same object." msgstr "Jei pirmasis pasirinktas elementas yra detalė, tuomet antrasis privalo būti to paties objekto detalė." msgid "The type of the last solid object part cannot be changed." msgstr "Paskutinės vientisos objekto detalės tipo keisti negalima." msgid "Type:" msgstr "Tipas:" msgid "Choose part type" msgstr "Pasirinkite detalės tipą" # AI Translated msgid "Instances to Separated Objects" msgstr "Kopijas į atskirus objektus" msgid "Enter new name" msgstr "Įvesti naują pavadinimą" msgid "Renaming" msgstr "Pervadinama" # AI Translated msgid "The following model object has been repaired" msgid_plural "The following model objects have been repaired" msgstr[0] "Šis modelio objektas buvo pataisytas" msgstr[1] "Šie modelio objektai buvo pataisyti" msgstr[2] "Šie modelio objektai buvo pataisyti" # AI Translated msgid "Failed to repair the following model object" msgid_plural "Failed to repair the following model objects" msgstr[0] "Nepavyko pataisyti šio modelio objekto" msgstr[1] "Nepavyko pataisyti šių modelio objektų" msgstr[2] "Nepavyko pataisyti šių modelio objektų" msgid "Repairing was canceled" msgstr "Taisymas buvo atšauktas" #, c-format, boost-format msgid "\"%s\" will exceed 1 million faces after this subdivision, which may increase slicing time. Do you want to continue?" msgstr "„%s“ po šio padalijimo (subdivision) viršys 1 milijoną poligonų (faces), todėl gali pailgėti sluoksniavimo (slicing) laikas. Ar norite tęsti?" #, c-format, boost-format msgid "\"%s\" part's mesh contains errors. Please repair it first." msgstr "Detalės „%s“ poligoninis tinklas (mesh) turi klaidų. Pirmiausia jas sutaisykite." # AI Translated msgid "Change Filaments" msgstr "Keisti gijas" msgid "Additional process preset" msgstr "Papildomas proceso profilis" msgid "Remove parameter" msgstr "Pašalinti parametrą" msgid "to" msgstr "į" msgid "Add height range" msgstr "Pridėti aukščio ribas" msgid "Invalid numeric." msgstr "Netinkamas skaičius." msgid "One cell can only be copied to one or more cells in the same column." msgstr "Vieną langelį galima nukopijuoti tik į vieną ar daugiau to paties stulpelio langelių." msgid "Copying multiple cells is not supported." msgstr "Kelių langelių kopijavimas nepalaikomas." msgid "Outside" msgstr "Išorėje" msgid "Layer height" msgstr "Sluoksnio aukštis" msgid "Wall loops" msgstr "Sienelės kontūrai" msgid "Infill density(%)" msgstr "Užpildo tankis (%)" msgid "Auto Brim" msgstr "Automatinis kraštas" msgid "Mouse ear" msgstr "Kampų fiksatoriai („Pelės ausys“)" msgid "Painted" msgstr "Piešta" msgid "Outer brim only" msgstr "Tik išorinis kraštas" msgid "Inner brim only" msgstr "Tik vidinis kraštas" msgid "Outer and inner brim" msgstr "Išorinis ir vidinis kraštai" msgid "No-brim" msgstr "Nėra krašto" msgid "Outer wall speed" msgstr "Išorinių sienų greitis" msgid "Plate" msgstr "Spausdinimo plokštė" msgid "Brim" msgstr "Kraštas" msgid "Object/Part Settings" msgstr "Objekto / detalės parametrai" msgid "Reset parameter" msgstr "Grąžinti į pradinį" msgid "Multicolor Print" msgstr "Daugiaspalvis spausdinimas" msgid "Line Type" msgstr "Linijos tipas" #, c-format, boost-format msgid "1x1 Grid: %d mm" msgstr "1x1 tinklelis: %d mm" msgid "More" msgstr "Daugiau" msgid "Open Preferences" msgstr "Atidaryti nustatymus." msgid "Open next tip" msgstr "Rodyti kitą patarimą." msgid "Open documentation in web browser" msgstr "Atidaryti dokumentaciją žiniatinklio naršyklėje." msgid "Color" msgstr "Spalva" msgid "Pause" msgstr "Pauzė" msgid "Template" msgstr "Šablonas" msgid "Custom" msgstr "Pasirinktinis" msgid "Pause:" msgstr "Pauzė:" msgid "Custom Template:" msgstr "Pasirinktinis šablonas:" msgid "Custom G-code:" msgstr "Pasirinktinis G-kodas:" msgid "Custom G-code" msgstr "Pasirinktinis G-kodas" msgid "Enter Custom G-code used on current layer:" msgstr "Įveskite pasirinktinį G-kodą dabartiniam sluoksniui:" msgid "Jump to layer" msgstr "Pereiti į sluoksnį" msgid "Please enter the layer number." msgstr "Įveskite sluoksnio numerį" msgid "Add Pause" msgstr "Pridėti pauzę" msgid "Insert a pause command at the beginning of this layer." msgstr "Įterpti pauzės komandą šio sluoksnio pradžioje." msgid "Add Custom G-code" msgstr "Pridėti pasirinktinį G-kodą" msgid "Insert custom G-code at the beginning of this layer." msgstr "Įterpti pasirinktinį G-kodą šio sluoksnio pradžioje." msgid "Add Custom Template" msgstr "Pridėti pasirinktinį šabloną" msgid "Insert template custom G-code at the beginning of this layer." msgstr "Įterpti šablono pasirinktinį G-kodą šio sluoksnio pradžioje." msgid "Filament " msgstr "Gija " msgid "Change filament at the beginning of this layer." msgstr "Pakeisti giją šio sluoksnio pradžioje." msgid "Delete Pause" msgstr "Pašalinti pauzę" msgid "Delete Custom Template" msgstr "Pašalinti pasirinktinį šabloną" msgid "Edit Custom G-code" msgstr "Taisyti pasirinktinį G-kodą" msgid "Delete Custom G-code" msgstr "Ištrinti pasirinktinį G-kodą" msgid "Delete Filament Change" msgstr "Ištrinti gijos keitimą" msgid "No printer" msgstr "Nepasirinktas spausdintuvas" msgid "..." msgstr "..." msgid "Failed to connect to the server" msgstr "Nepavyko prisijungti prie serverio" msgid "Check the status of current system services" msgstr "Patikrinti dabartinių sistemos paslaugų būseną" msgid "code" msgstr "kodas" msgid "Failed to connect to cloud service" msgstr "Nepavyko prisijungti prie debesies paslaugos" msgid "Please click on the hyperlink above to view the cloud service status" msgstr "Spustelėkite nuorodą viršuje, kad pamatytumėte debesies paslaugos būseną" msgid "Failed to connect to the printer" msgstr "Nepavyko prisijungti prie spausdintuvo" msgid "Connection to printer failed" msgstr "Nepavyko prisijungti prie spausdintuvo" msgid "Please check the network connection of the printer and Orca." msgstr "Prašome patikrinti spausdintuvo ir OrcaSlicer ryšį su tinklu." msgid "Connecting..." msgstr "Jungiamasi..." msgid "Auto Refill" msgstr "Automatinis papildymas" msgid "Load" msgstr "Įkelti" msgid "Unload" msgstr "Iškrauti" msgid "Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically load or unload filament." msgstr "Pasirinkite AMS angą, tada paspauskite „Įkelti“ arba „Iškrauti“ mygtuką, kad automatiškai įkeltumėte arba iškrautumėte gijas." msgid "Filament type is unknown which is required to perform this action. Please set target filament's informations." msgstr "Šiam veiksmui atlikti reikalingas gijos tipas yra nežinomas. Nustatykite tikslinės gijos informaciją." # AI Translated msgid "AMS has not been initialized. Please initialize it before use." msgstr "AMS nebuvo inicijuotas. Prieš naudojimą jį inicijuokite." msgid "Changing fan speed during printing may affect print quality, please choose carefully." msgstr "Ventiliatoriaus greičio keitimas spausdinimo metu gali paveikti spausdinimo kokybę, pasirinkite atsakingai." msgid "Change Anyway" msgstr "Vis tiek pakeisti" msgid "Off" msgstr "Išjungta" msgid "Filter" msgstr "Filtras" msgid "Enabling filtration redirects the right fan to filter gas, which may reduce cooling performance." msgstr "Įjungus filtravimą, dešinysis ventiliatorius nukreipiamas dujų filtravimui, todėl gali sumažėti aušinimo našumas." msgid "Enabling filtration during printing may reduce cooling and affect print quality. Please choose carefully." msgstr "Filtravimo įjungimas spausdinimo metu gali sumažinti aušinimą ir paveikti spausdinimo kokybę. Pasirinkite atsakingai." msgid "The selected material only supports the current fan mode, and it can't be changed during printing." msgstr "Pasirinkta medžiaga palaiko tik dabartinį ventiliatoriaus režimą, jo negalima keisti spausdinimo metu." msgid "Cooling" msgstr "Aušinimas" msgid "Heating" msgstr "Šildymas" msgid "Exhaust" msgstr "Ištraukimas" msgid "Full Cooling" msgstr "Maksimalus aušinimas" msgid "Init" msgstr "Init" msgid "Chamber" msgstr "Kamera" msgid "Innerloop" msgstr "Vidinė cirkuliacija" msgid "Top" msgstr "Viršutinis" msgid "The fan controls the temperature during printing to improve print quality. The system automatically adjusts the fan's switch and speed according to different printing materials." msgstr "Ventiliatorius kontroliuoja temperatūrą spausdinimo metu, kad pagerintų spausdinimo kokybę. Sistema automatiškai sureguliuoja ventiliatoriaus būseną ir greitį pagal skirtingas spausdinimo medžiagas." msgid "Cooling mode is suitable for printing PLA/PETG/TPU materials and filters the chamber air." msgstr "Aušinimo režimas tinka spausdinant PLA/PETG/TPU medžiagas ir filtruoja kameros orą." msgid "Heating mode is suitable for printing ABS/ASA/PC/PA materials and circulates filters the chamber air." msgstr "Šildymo režimas tinka spausdinant ABS/ASA/PC/PA medžiagas, jis cirkuliuoja ir filtruoja kameros orą." msgid "Strong cooling mode is suitable for printing PLA/TPU materials. In this mode, the printouts will be fully cooled." msgstr "Intensyvaus aušinimo režimas tinka spausdinant PLA/TPU medžiagas. Šiame režime spaudiniai bus visiškai ataušinami." msgid "Cooling mode is suitable for printing PLA/PETG/TPU materials." msgstr "Aušinimo režimas tinka spausdinant PLA/PETG/TPU medžiagas." msgctxt "air_duct" msgid "Right(Aux)" msgstr "Dešinysis (papildomas)" msgctxt "air_duct" msgid "Right(Filter)" msgstr "Dešinysis (filtras)" msgctxt "air_duct" msgid "Left(Aux)" msgstr "Kairysis (papildomas)" # AI Translated msgctxt "Hotend Heat Breaker Fan" msgid "Hotend" msgstr "Kaitinimo blokas" msgid "Parts" msgstr "Detalės" msgid "Aux" msgstr "Papild" msgid "Nozzle1" msgstr "Purkštukas 1" msgid "MC Board" msgstr "Valdymo plokštė (MC Board)" msgid "Heat" msgstr "Kaitinimas" msgid "Fan" msgstr "Ventiliatorius" msgid "Idling..." msgstr "Laukimo režimas..." msgid "Heat the nozzle" msgstr "Įkaitinti purkštuką" msgid "Cut filament" msgstr "Nukirpti giją" msgid "Pull back the current filament" msgstr "Išstumti atgal dabartinę giją" msgid "Push new filament into extruder" msgstr "Įstumti naują giją į ekstruderį" msgid "Grab new filament" msgstr "Sugriebti naują giją" msgid "Purge old filament" msgstr "Išvalyti seną giją" msgid "Confirm extruded" msgstr "Patvirtinti, kad išspausta" msgid "Check filament location" msgstr "Patikrinti gijos padėtį" # AI Translated msgid "Switch" msgstr "Perjungti" # AI Translated msgid "hotend" msgstr "kaitinimo blokas" # AI Translated msgid "Wait for AMS cooling" msgstr "Laukiama AMS aušinimo" # AI Translated msgid "Switch current filament at Filament Track Switch" msgstr "Perjunkite dabartinę giją ties Filament Track Switch" # AI Translated msgid "Pull back current filament at Filament Track Switch" msgstr "Ištraukite dabartinę giją ties Filament Track Switch" # AI Translated msgid "Switch track at Filament Track Switch" msgstr "Perjunkite takelį ties Filament Track Switch" msgid "The maximum temperature cannot exceed " msgstr "Maksimali temperatūra negali viršyti " msgid "The minmum temperature should not be less than " msgstr "Minimali temperatūra neturi būti mažesnė nei " msgid "Type to filter..." msgstr "Įveskite tekstą filtravimui..." msgid "All" msgstr "Visi" msgid "No selected items..." msgstr "Nėra pasirinktų elementų..." msgid "All items selected..." msgstr "Visi elementai pažymėti..." msgid "No matching items..." msgstr "Nerasta atitinkančių elementų..." msgid "Deselect All" msgstr "Panaikinti viso pasirinkimą" msgid "Select visible" msgstr "Pasirinkti matomus" msgid "Deselect visible" msgstr "Panaikinti matomų pasirinkimą" msgid "Filter selected" msgstr "Filtruoti pasirinktus" msgid "Filter nonSelected" msgstr "Filtruoti nepasirinktus" msgid "Simple settings" msgstr "Paprasti nustatymai" msgid "Advanced settings" msgstr "Sudėtingesni parametrai" msgid "Expert settings" msgstr "Eksperto parametrai" msgid "Developer mode" msgstr "Kūrėjo režimas" msgid "Launch troubleshoot center" msgstr "Atidaryti trikčių šalinimo centrą" # AI Translated msgid "Set nozzle count" msgstr "Nustatyti purkštukų skaičių" # AI Translated msgid "Please set nozzle count" msgstr "Nustatykite purkštukų skaičių" # AI Translated msgid "Error: Can not set both nozzle count to zero." msgstr "Klaida: negalima abiejų purkštukų skaičiaus nustatyti į nulį." # AI Translated #, c-format, boost-format msgid "Error: Nozzle count can not exceed %d." msgstr "Klaida: purkštukų skaičius negali viršyti %d." msgid "Confirm" msgstr "Patvirtinti" msgid "Extruder" msgstr "Ekstruderis (Stūmiklis)" # AI Translated msgid "Nozzle Selection" msgstr "Purkštuko pasirinkimas" # AI Translated msgid "Available Nozzles" msgstr "Prieinami purkštukai" msgid "Nozzle Info" msgstr "Purkštuko informacija" # AI Translated msgid "Sync Nozzle status" msgstr "Sinchronizuoti purkštuko būseną" # AI Translated msgid "Caution: Mixing nozzle diameters in one print is not supported. If the selected size is only on one extruder, single-extruder printing will be enforced." msgstr "Dėmesio: skirtingų purkštukų skersmenų maišymas viename spausdinime nepalaikomas. Jei pasirinktas dydis yra tik viename ekstruderyje, bus taikomas spausdinimas vienu ekstruderiu." # AI Translated #, c-format, boost-format msgid "Refresh %d/%d..." msgstr "Atnaujinama %d/%d..." # AI Translated msgid "Unknown nozzle detected. Refresh to update info (unrefreshed nozzles will be excluded during slicing). Verify nozzle diameter & flow rate against displayed values." msgstr "Aptiktas nežinomas purkštukas. Atnaujinkite, kad būtų atnaujinta informacija (neatnaujinti purkštukai bus pašalinti pjaustymo metu). Palyginkite purkštuko skersmenį ir srautą su rodomomis reikšmėmis." # AI Translated msgid "Unknown nozzle detected. Refresh to update (unrefreshed nozzles will be skipped in slicing)." msgstr "Aptiktas nežinomas purkštukas. Atnaujinkite, kad būtų atnaujinta informacija (neatnaujinti purkštukai bus praleisti pjaustant)." # AI Translated msgid "Please confirm whether the required nozzle diameter and flow rate match the currently displayed values." msgstr "Patvirtinkite, ar reikalingas purkštuko skersmuo ir srautas atitinka šiuo metu rodomas reikšmes." # AI Translated msgid "Your printer has different nozzles installed. Please select a nozzle for this print." msgstr "Jūsų spausdintuve įdiegti skirtingi purkštukai. Pasirinkite purkštuką šiam spausdinimui." msgid "Ignore" msgstr "Nekreipti dėmesio" # AI Translated msgid "Done." msgstr "Atlikta." msgid "" "All the selected objects are on a locked plate.\n" "Cannot auto-arrange these objects." msgstr "" "Visi pasirinkti objektai yra užrakintoje spausdinimo plokštėje.\n" "Šių objektų automatiškai išdėstyti negalima." msgid "No arrangeable objects are selected." msgstr "Nėra pasirinkta jokių tvarkytinų objektų." msgid "" "This plate is locked.\n" "Cannot auto-arrange on this plate." msgstr "" "Ši plokštė užrakinta.\n" "Automatinio objektų išdėstymo šioje plokštėje atlikti negalima." msgid "Arranging..." msgstr "Išdėstoma..." msgid "Arranging" msgstr "Išdėstymas" # AI Translated msgid "Arranging " msgstr "Išdėstoma " msgid "Arranging canceled." msgstr "Išdėstymas atšauktas." msgid "Arranging complete, but some items were not able to be arranged. Reduce spacing and try again." msgstr "Išdėstymas baigtas, tačiau kai kurių elementų nepavyko išdėstyti. Sumažinkite tarpą ir pabandykite dar kartą." msgid "Arranging done." msgstr "Išdėstymas atliktas." msgid "Arrange failed. Found some exceptions when processing object geometries." msgstr "Išdėstymas nepavyko. Apdorojant objektų geometriją aptiktos išimtys." #, c-format, boost-format msgid "" "Arrangement ignored the following objects which can't fit into a single bed:\n" "%s" msgstr "" "Išdėstymas nepaisė šių objektų, kurie netelpa į vieną pagrindą:\n" "%s" msgid "" "All the selected objects are on a locked plate.\n" "Cannot auto-orient these objects." msgstr "" "Visi pažymėti objektai yra ant užrakintos plokštės.\n" "Automatinio objektų suorientavimo šiems objektams atlikti negalima." msgid "" "This plate is locked.\n" "Cannot auto-orient on this plate." msgstr "" "Ši plokštė užrakinta.\n" "Automatinio objektų orientavimo šioje plokštėje atlikti negalima." msgid "Orienting..." msgstr "Nustatoma padėtis..." msgid "Orienting" msgstr "Padėties nustatymas" msgid "Orienting canceled." msgstr "Padėties nustatymas atšauktas." msgid "Filling" msgstr "Užpildoma" msgid "Bed filling canceled." msgstr "Pagrindo užpildymas atšauktas." msgid "Bed filling done." msgstr "Pagrindo užpildymas atliktas." msgid "Searching for optimal orientation" msgstr "Optimalios padėties paieška" msgid "Orientation search canceled." msgstr "Padėties paieška atšaukta." msgid "Orientation found." msgstr "Padėtis rasta." msgid "Logging in" msgstr "Jungiamasi" msgid "Login failed" msgstr "Prisijungti nepavyko" msgid "Please check the printer network connection." msgstr "Prašome patikrinti spausdintuvo kompiuterinio tinklo jungtį." msgid "Abnormal print file data: please slice again." msgstr "Nenormalūs spausdinimo failo duomenys. Atlikite sluoksniavimą dar kartą" msgid "Task canceled." msgstr "Užduotis atšaukta." msgid "Upload task timed out. Please check the network status and try again." msgstr "Įkėlimo užduotis viršijo laukimo laiką. Prašome patikrinti tinklo būseną ir bandyti iš naujo." msgid "Cloud service connection failed. Please try again." msgstr "Nepavyko prisijungti prie debesies paslaugos. Prašome bandyti iš naujo." msgid "Print file not found; please slice again." msgstr "Spausdinimo failas nerastas. Paruoškite spausdinimui (slice) iš naujo." msgid "The print file exceeds the maximum allowable size (1GB). Please simplify the model and slice again." msgstr "Spausdinimo failas viršija didžiausią leistiną dydį (1GB). Prašome supaprastinti modelį ir išsluoksniuoti iš naujo." msgid "Failed to send the print job. Please try again." msgstr "Nepavyko išsiųsti spausdinimo užduoties. Prašome bandyti iš naujo." msgid "Failed to upload file to ftp. Please try again." msgstr "Nepavyko failo įkelti į ftp serverį. Prašome pabandyti iš naujo." msgid "Check the current status of the Bambu Lab server by clicking on the link above." msgstr "Paspaudę nuorodą viršuje, galite patikrinti aktualią Bambu Lab serverio būseną." msgid "The size of the print file is too large. Please adjust the file size and try again." msgstr "Spausdinimo failo dydis per didelis. Prašome pakoreguoti dydį ir bandyti pakartotinai." msgid "Print file not found; please slice it again and send it for printing." msgstr "Nerastas spausdinimo failas. Prašome dar kartą išsluoksniuoti ir išsiųsti spausdinimui." msgid "Failed to upload print file via FTP. Please check the network status and try again." msgstr "Nepavyko spausdinimo failo įkelti į FTP serverį. Patikrinkite tinklo būseną ir bandykite dar kartą." msgid "Sending print job over LAN" msgstr "Spausdinimo užduotis siunčiama vietiniu tinklu" msgid "Sending print job through cloud service" msgstr "Spausdinimo užduotis siunčiama debesies paslauga" msgid "Print task sending times out." msgstr "Spausdinimo užduoties siuntimas viršijo nustatytą laiką." msgid "Service Unavailable" msgstr "Paslauga negalima" msgid "Unknown Error." msgstr "Nežinoma klaida." msgid "Sending print configuration" msgstr "Siunčiama spausdinimo konfigūracija" #, c-format, boost-format msgid "Successfully sent. Will automatically jump to the device page in %ss" msgstr "Sėkmingai išsiųsta. Automatiškai per %s sek. bus pereita į įrenginio puslapį" #, c-format, boost-format msgid "Successfully sent. Will automatically jump to the next page in %ss" msgstr "Sėkmingai išsiųsta. Automatiškai per %s sek. bus pereita į kitą puslapį" #, c-format, boost-format msgid "Access code:%s IP address:%s" msgstr "Prieigos kodas: %s IP adresas: %s" msgid "A Storage needs to be inserted before printing via LAN." msgstr "Prieš spausdinant per vietinį tinklą (LAN), būtina įdėti atminties laikmeną." msgid "Sending print job over LAN, but the Storage in the printer is abnormal and print-issues may be caused by this." msgstr "Spausdinimo užduotis siunčiama vietiniu tinklu (LAN), tačiau spausdintuvo atminties laikmenos veikla yra sutrikusi, todėl gali kilti spausdinimo problemų." msgid "The Storage in the printer is abnormal. Please replace it with a normal Storage before sending print job to printer." msgstr "Spausdintuvo atminties laikmenos veikla yra sutrikusi. Pakeiskite ją tvarkinga laikmena prieš siųsdami užduotį į spausdintuvą." msgid "The Storage in the printer is read-only. Please replace it with a normal Storage before sending print job to printer." msgstr "Spausdintuvo atminties laikmena yra apsaugota nuo įrašymo (tik skaitymui). Pakeiskite ją tvarkinga laikmena prieš siųsdami užduotį į spausdintuvą." msgid "Encountered an unknown error with the Storage status. Please try again." msgstr "Įvyko nežinoma klaida, susijusi su atminties laikmenos būsena. Bandykite dar kartą." msgid "Sending G-code file over LAN" msgstr "Vietiniu tinklu siunčiamas G-kodo failas" msgid "Sending G-code file to SD card" msgstr "Į SD kortelę siunčiamas G-kodo failas" #, c-format, boost-format msgid "Successfully sent. Close current page in %s s" msgstr "Sėkmingai išsiųsta. Dabartinis puslapis užsivers po %s sek" msgid "Storage needs to be inserted before sending to printer." msgstr "Prieš siunčiant užduotį į spausdintuvą, būtina įdėti atminties laikmeną." msgid "Sending G-code file over LAN, but the Storage in the printer is abnormal and print-issues may be caused by this." msgstr "G-kodo failas siunčiamas vietiniu tinklu (LAN), tačiau spausdintuvo atminties laikmenos veikla yra sutrikusi, todėl gali kilti spausdinimo problemų." msgid "The Storage in the printer is abnormal. Please replace it with a normal Storage before sending to printer." msgstr "Spausdintuvo atminties laikmena yra apsaugota nuo įrašymo (tik skaitymui). Pakeiskite ją tvarkinga laikmena prieš siųsdami failą į spausdintuvą." msgid "The Storage in the printer is read-only. Please replace it with a normal Storage before sending to printer." msgstr "Spausdintuvo atmintis yra tik skaitoma (read-only). Prieš siųsdami į spausdintuvą, pakeiskite ją į įprastą atmintinę." msgid "Bad input data for EmbossCreateObjectJob." msgstr "Klaidingi įvesties duomenys užduočiai „EmbossCreateObjectJob“." msgid "Add Emboss text object" msgstr "Pridėti iškiliojo teksto (Emboss) objektą" msgid "Bad input data for EmbossUpdateJob." msgstr "Klaidingi įvesties duomenys užduočiai „EmbossUpdateJob“." msgid "Created text volume is empty. Change text or font." msgstr "Sukurtas teksto tūris yra tuščias. Pakeiskite tekstą arba šriftą." msgid "Bad input data for CreateSurfaceVolumeJob." msgstr "Klaidingi įvesties duomenys užduočiai „CreateSurfaceVolumeJob“." msgid "Bad input data for UseSurfaceJob." msgstr "Klaidingi įvesties duomenys užduočiai „UseSurfaceJob“." #. TRN: This is the title of the action appearing in undo/redo stack. #. It is same for Text and SVG. msgid "Emboss attribute change" msgstr "Iškilumo (Emboss) atributo keitimas" msgid "Add Emboss text Volume" msgstr "Pridėti iškiliojo teksto (Emboss) tūrį" msgid "Font doesn't have any shape for given text." msgstr "Šriftas neturi geometrinės formos (shape) pateiktam tekstui." msgid "There is no valid surface for text projection." msgstr "Nėra tinkamo paviršiaus teksto projekcijai." msgid "An unexpected error occurred" msgstr "Įvyko netikėta klaida" msgid "Thermal Preconditioning for first layer optimization" msgstr "Terminis paruošimas (Preconditioning) pirmojo sluoksnio optimizavimui" msgid "Remaining time: Calculating..." msgstr "Liko laiko: skaičiuojama..." msgid "The heated bed's thermal preconditioning helps optimize the first layer print quality. Printing will start once preconditioning is complete." msgstr "Šildomo pagrindo terminis paruošimas padeda optimizuoti pirmojo sluoksnio spausdinimo kokybę. Spausdinimas prasidės iškart, kai pasibaigs paruošimo procesas." #, c-format, boost-format msgid "Remaining time: %dmin%ds" msgstr "Liko laiko: %d min. %d sek." msgid "Importing SLA archive" msgstr "Importuojamas SLA archyvas" msgid "The SLA archive doesn't contain any presets. Please activate some SLA printer presets first before importing that SLA archive." msgstr "SLA archyve nėra jokių profilių. Prieš importuodami šį SLA archyvą, pirmiausia aktyvinkite kurį nors SLA spausdintuvo profilį." msgid "Importing canceled." msgstr "Importavimas atšauktas." msgid "Importing done." msgstr "Importavimas atliktas." msgid "The imported SLA archive did not contain any presets. The current SLA presets were used as fallback." msgstr "Importuotame SLA archyve nebuvo jokių išankstinių nustatymų. Dabartiniai SLA nustatymai buvo naudojami kaip atsarginiai." msgid "You cannot load an SLA project with a multi-part object on the bed" msgstr "Negalite įkelti SLA projekto, kai ant pagrindo yra kelių detalių objektas." msgid "Please check your object list before preset changing." msgstr "Prieš keisdami profilį, patikrinkite objektų sąrašą." msgid "Attention!" msgstr "Dėmesio!" msgid "Downloading" msgstr "Atsisiunčiama" msgid "Download failed" msgstr "Atsisiuntimas nepavyko" msgid "Canceled" msgstr "Atšaukta" msgid "Installed successfully" msgstr "Sėkmingai įdiegta" msgid "Installing" msgstr "Diegiama" msgid "Install failed" msgstr "Diegimas nepavyko" msgid "License Info" msgstr "Licencijos sąlygos" msgid "Copyright" msgstr "Autorių teisės" msgid "License" msgstr "Licencija" msgid "Orca Slicer is licensed under " msgstr "Orca Slicer yra licencijuojama pagal " msgid "GNU Affero General Public License, version 3" msgstr "GNU Affero bendroji viešoji licencija, 3 versija" msgid "Orca Slicer is based on PrusaSlicer and BambuStudio" msgstr "Orca Slicer sukurtas remiantis PrusaSlicer ir BambuStudio" msgid "Libraries" msgstr "Bibliotekos" msgid "This software uses open source components whose copyright and other proprietary rights belong to their respective owners" msgstr "Ši programinė įranga naudoja atvirojo kodo komponentus, kurių autorių teisės ir kitos nuosavybės teisės priklauso atitinkamiems savininkams" #, c-format, boost-format msgid "About %s" msgstr "Apie %s" msgid "Open-source slicing stands on a tradition of collaboration and attribution. Slic3r, created by Alessandro Ranellucci and the RepRap community, laid the foundation. PrusaSlicer by Prusa Research built on that work, Bambu Studio forked from PrusaSlicer, and SuperSlicer extended it with community-driven enhancements. Each project carried the work of its predecessors forward, crediting those who came before." msgstr "Atvirojo kodo paruošimas spausdinimui (slicing) remiasi bendradarbiavimo ir autorystės pripažinimo tradicija. Pagrindą padėjo „Slic3r“, kurį sukūrė Alessandro Ranellucci ir „RepRap“ bendruomenė. „Prusa Research“ sukurta „PrusaSlicer“ programa buvo pagrįsta šiuo darbu, „Bambu Studio“ atsiskyrė nuo „PrusaSlicer“, o „SuperSlicer“ ją išplėtė, įtraukdama bendruomenės siūlomus patobulinimus. Kiekvienas projektas tęsė savo pirmtakų darbą, nurodydamas ankstesnių kūrėjų indėlį." msgid "OrcaSlicer began in that same spirit, drawing from PrusaSlicer, BambuStudio, SuperSlicer, and CuraSlicer. But it has since grown far beyond its origins — introducing advanced calibration tools, precise wall and seam control and hundreds of other features." msgstr "„OrcaSlicer“ buvo sukurtas vadovaujantis ta pačia dvasia, remiantis „PrusaSlicer“, „BambuStudio“, „SuperSlicer“ ir „CuraSlicer“ programomis. Tačiau nuo to laiko jis smarkiai išsiplėtė ir dabar siūlo pažangius kalibravimo įrankius, tikslų sienelių ir siūlių valdymą bei šimtus kitų funkcijų." msgid "Today, OrcaSlicer is the most widely used and actively developed open-source slicer in the 3D printing community. Many of its innovations have been adopted by other slicers, making it a driving force for the entire industry." msgstr "Šiandien „OrcaSlicer“ yra plačiausiai naudojama ir aktyviausiai tobulinama atvirojo kodo paruošimo spausdinimui (slicer) programa 3D spausdinimo bendruomenėje.. Daugelis jos naujovių buvo perimtos kitų pjaustymo programų, todėl ji tapo visos pramonės varomąja jėga." msgid "AMS Materials Setting" msgstr "AMS medžiagų nuostatos" msgid "Close" msgstr "Uždaryti" msgid "" "Nozzle\n" "Temperature" msgstr "" "Purkštuko\n" "temperatūra" msgid "max" msgstr "maks" msgid "min" msgstr "min" #, boost-format msgid "The input value should be greater than %1% and less than %2%" msgstr "Įvesties reikšmė turi būti didesnė nei %1% ir mažesnė nei %2%" msgid "Factors of Flow Dynamics Calibration" msgstr "Srauto dinamikos kalibravimo koeficientai" msgid "Wiki Guide" msgstr "Wiki vadovas" msgid "PA Profile" msgstr "PA profilis" msgid "Factor K" msgstr "Koeficientas K" msgid "Factor N" msgstr "Koeficientas N" msgid "Setting AMS slot information while printing is not supported" msgstr "Negalima pakeisti AMS angos informacijos kol vyksta spausdinimas" msgid "Setting Virtual slot information while printing is not supported" msgstr "Negalima pakeisti virtualios angos informacijos kol vyksta spausdinimas" msgid "Are you sure you want to clear the filament information?" msgstr "Ar jūs tikrai norite išvalyti gijos informaciją?" msgid "You need to select the material type and color first." msgstr "Pradžioje jums reikia pasirinkti medžiagos tipą ir spalvą." #, c-format, boost-format msgid "Please input a valid value (K in %.1f~%.1f)" msgstr "Įveskite tinkamą reikšmę (K %.1f~%.1f)" #, c-format, boost-format msgid "Please input a valid value (K in %.1f~%.1f, N in %.1f~%.1f)" msgstr "Įveskite tinkamą reikšmę (K %.1f~%.1f, N %.1f~%.1f)" msgid "" "The nozzle flow is not set. Please set the nozzle flow rate before editing the filament.\n" "'Device -> Print parts'" msgstr "" "Purkštuko srautas nenustatytas. Nustatykite purkštuko srauto greitį prieš redaguodami giją\n" "„Įrenginys -> Detalių spausdinimas“" msgid "AMS" msgstr "AMS" msgid "Other Color" msgstr "Kita spalva" msgid "Custom Color" msgstr "Pasirinktinė spalva" msgid "Dynamic flow calibration" msgstr "Dinaminis srauto kalibravimas" msgid "The nozzle temp and max volumetric speed will affect the calibration results. Please fill in the same values as the actual printing. They can be auto-filled by selecting a filament preset." msgstr "Purkštuko temperatūra ir maksimalus tūrinis greitis turi įtakos kalibravimo rezultatams. Įveskite tokias pačias reikšmes, kokios bus naudojamos tikrojo spausdinimo metu. Jas galima užpildyti automatiškai, pasirinkus gijos profilį." msgid "Nozzle Diameter" msgstr "Purkštuko skersmuo" msgid "Plate Type" msgstr "Plokštės tipas" msgid "Nozzle temperature" msgstr "Purkštuko temperatūra" msgid "Bed Temperature" msgstr "Pagrindo temperatūra" msgid "Max volumetric speed" msgstr "Maksimalus tūrinis greitis" msgid "℃" msgstr "℃" msgid "Bed temperature" msgstr "Pagrindo temperatūra" msgid "mm³" msgstr "mm³" msgid "Start" msgstr "Pradėti" msgid "Next" msgstr "Toliau" msgid "Calibration completed. Please find the most uniform extrusion line on your hot bed like the picture below, and fill the value on its left side into the factor K input box." msgstr "Kalibravimas baigtas. Raskite tolygiausią ekstruzijos liniją ant kaitinamo pagrindo (kaip parodyta paveikslėlyje žemiau) ir įveskite jos kairėje pusėje esančią reikšmę į koeficiento K įvesties laukelį." msgid "Save" msgstr "Išsaugoti" msgctxt "Navigation" msgid "Back" msgstr "Atgal" msgid "Example" msgstr "Pavyzdys" #, c-format, boost-format msgid "Calibrating... %d%%" msgstr "Kalibruojama... %d%%" msgid "Calibration completed" msgstr "Kalibravimas baigtas" #, c-format, boost-format msgid "%s does not support %s" msgstr "%s nepalaiko %s" msgid "Step" msgstr "Žingsnis" msgid "Unmapped" msgstr "Nepriskirta" msgid "" "Upper half area: Original\n" "Lower half area: The filament from original project will be used when unmapped.\n" "And you can click it to modify" msgstr "" "Viršutinė srities pusė: originali\n" "Apatinė srities pusė: kai nepriskirta, bus naudojama gija iš originalaus projekto.\n" "Galite spustelėti, kad pakeistumėte" msgid "" "Upper half area: Original\n" "Lower half area: Filament in AMS\n" "And you can click it to modify" msgstr "" "Viršutinė srities pusė: originali\n" "Apatinė srities pusė: gija esanti AMS\n" "Galite spustelėti, kad pakeistumėte" msgid "" "Upper half area: Original\n" "Lower half area: Filament in AMS\n" "And you cannot click it to modify" msgstr "" "Viršutinė srities pusė: originali\n" "Apatinė srities pusė: gija esanti AMS\n" "Spustelėti pakeitimui negalite" msgid "AMS Slots" msgstr "AMS angos" msgid "Please select from the following filaments" msgstr "Pasirinkite iš šių gijų" # AI Translated #, c-format, boost-format msgid "Select filament that installed to the %s" msgstr "Pasirinkite giją, įdiegtą į %s" msgid "Left AMS" msgstr "Kairysis AMS" msgid "External" msgstr "Išorinis" msgid "Reset current filament mapping" msgstr "Atkurti dabartinį gijų priskyrimą" msgid "Right AMS" msgstr "Dešinysis AMS" # AI Translated #, c-format, boost-format msgid "Printing with the current nozzle may produce an extra %0.2f g of waste." msgstr "Spausdinant su dabartiniu purkštuku gali susidaryti papildomai %0.2f g atliekų." # AI Translated #, c-format, boost-format msgid "Tips: the filament type(%s) does not match with the filament type(%s) in the slicing file. If you want to use this slot, you can install %s instead of %s and change slot information on the 'Device' page." msgstr "Patarimas: gijos tipas (%s) neatitinka gijos tipo (%s) pjaustymo faile. Jei norite naudoti šį lizdą, vietoj %s galite įdiegti %s ir pakeisti lizdo informaciją puslapyje „Įrenginys“." # AI Translated #, c-format, boost-format msgid "Cannot select: the filament type(%s) does not match with the filament type(%s) in the slicing file. If you want to use this slot, you can install %s instead of %s and change slot information on the 'Device' page." msgstr "Negalima pasirinkti: gijos tipas (%s) neatitinka gijos tipo (%s) pjaustymo faile. Jei norite naudoti šį lizdą, vietoj %s galite įdiegti %s ir pakeisti lizdo informaciją puslapyje „Įrenginys“." # AI Translated #, c-format, boost-format msgid "Cannot select: the slot is empty or undefined. If you want to use this slot, you can install %s and change slot information on the 'Device' page." msgstr "Negalima pasirinkti: lizdas tuščias arba neapibrėžtas. Jei norite naudoti šį lizdą, galite įdiegti %s ir pakeisti lizdo informaciją puslapyje „Įrenginys“." # AI Translated msgid "Cannot select: No filament loaded in current slot." msgstr "Negalima pasirinkti: dabartiniame lizde neįkelta jokia gija." msgid "Enable AMS" msgstr "Įjungti AMS" msgid "Print with filament in the AMS" msgstr "Spausdinti AMS gijomis" msgid "Disable AMS" msgstr "Išjungti AMS" msgid "Print with filament on external spool" msgstr "Spausdinti išorinės ritės gija" msgid "Please change the desiccant when it is too wet. The indicator may not represent accurately in following cases: when the lid is open or the desiccant pack is changed. It takes a few hours to absorb the moisture, and low temperatures also slow down the process." msgstr "Pakeiskite drėgmės sugėriklį (sausiklį), kai jis per daug sudrėksta. Indikatoriaus rodmenys gali būti netikslūs šiais atvejais: kai atidarytas dangtis arba pakeistas drėgmės sugėriklio paketas. Drėgmei sugerti reikia kelių valandų, o žema temperatūra šį procesą dar labiau sulėtina." msgid "Configure which AMS slot should be used for a filament used in the print job." msgstr "Konfigūruokite, kuri AMS anga turi būti naudojama spausdinimo užduoties gijai." msgid "Filament used in this print job" msgstr "Šiame spausdinime naudojama gija" msgid "AMS slot used for this filament" msgstr "Šiai gijai naudojama AMS anga" msgid "Click to select AMS slot manually" msgstr "Spustelėkite, kad pasirinktumėte AMS angą rankiniu būdu" msgid "Do not Enable AMS" msgstr "Nejungti AMS" msgid "Print using filament on external spool." msgstr "Spausdinti išorinės ritės gija" msgid "Print with filament in AMS" msgstr "Spausdinti AMS gijomis" # AI Translated msgctxt "Nozzle position" msgid "Left" msgstr "Kairė" # AI Translated msgctxt "Nozzle position" msgid "Right" msgstr "Dešinė" msgid "When the current material run out, the printer will continue to print in the following order." msgstr "Pasibaigus esamai medžiagai, spausdintuvas toliau spausdins šia tvarka." msgid "Identical filament: same brand, type and color." msgstr "Identiška gija: tas pats gamintojas, tipas ir spalva." msgid "Group" msgstr "Grupė" msgid "When the current material runs out, the printer would use identical filament to continue printing." msgstr "Kai pasibaigs dabartinė medžiaga, spausdintuvas naudos identišką giją spausdinimui tęsti." msgid "The printer does not currently support auto refill." msgstr "Šiuo metu spausdintuvas nepalaiko automatinio papildymo." msgid "AMS filament backup is not enabled; please enable it in the AMS settings." msgstr "AMS atsarginė gija neįjungta, įjunkite ją AMS nustatymuose." msgid "" "When the current filament runs out, the printer will use identical filament to continue printing.\n" "*Identical filament: same brand, type and color." msgstr "" "Kai pasibaigs dabartinė gija, spausdintuvas naudos identišką giją spausdinimui tęsti.\n" "*Identiška gija: tas pats gamintojas, tipas ir spalva." msgid "DRY" msgstr "SAUSA" msgid "WET" msgstr "DRĖGNA" msgid "AMS Settings" msgstr "AMS nustatymai" msgid "Insertion update" msgstr "Įdėklo atnaujinimas" msgid "The AMS will automatically read the filament information when inserting a new Bambu Lab filament spool. This takes about 20 seconds." msgstr "Įdėjus naują Bambu Lab giją, AMS automatiškai nuskaitys jos informaciją. Tai trunka apie 20 sekundžių." msgid "Note: if a new filament is inserted during printing, the AMS will not automatically read any information until printing is completed." msgstr "Pastaba: jei spausdinimo metu įdedama nauja gija, AMS automatiškai nenuskaitys jokios informacijos, kol spausdinimas nebus baigtas." msgid "When inserting a new filament, the AMS will not automatically read its information, leaving it blank for you to enter manually." msgstr "Įdėjus naują giją, AMS automatiškai nenuskaitys jos informacijos, todėl ją reikės įvesti rankiniu būdu." msgid "Update on startup" msgstr "Atnaujinti pradedant" msgid "The AMS will automatically read the information of inserted filament on start-up. It will take about 1 minute. The reading process will rotate the filament spools." msgstr "AMS paleidimo metu automatiškai nuskaitys įdėtos gijos informaciją. Tai užtruks apie 1 minutę. Nuskaitymo procesas sukels gijos ritės sukimąsi." msgid "The AMS will not automatically read information from inserted filament during startup and will continue to use the information recorded before the last shutdown." msgstr "Paleidimo metu AMS automatiškai nenuskaitys įdėtos gijos informacijos ir toliau naudosis prieš paskutinį išjungimą įrašyta informacija." msgid "Update remaining capacity" msgstr "Įvertinti likusį gijos kiekį" msgid "AMS will attempt to estimate the remaining capacity of the Bambu Lab filaments." msgstr "AMS bandys įvertinti likusį „Bambu Lab“ gijų kiekį (talpą)." msgid "AMS filament backup" msgstr "AMS atsarginė gija" msgid "AMS will continue to another spool with matching filament properties automatically when current filament runs out." msgstr "Kai baigsis dabartinė gija, AMS automatiškai tęs darbą kitoje ritėje su tokiomis pačiomis gijos savybėmis." msgid "Air Printing Detection" msgstr "Spausdinimo ore (Air Printing) aptikimas" msgid "Detects clogging and filament grinding, halting printing immediately to conserve time and filament." msgstr "Aptikusi užsikimšimą arba gijos gremžimą, taupant laiką ir giją, sistema iš karto sustabdo spausdinimą." msgid "AMS Type" msgstr "AMS tipas" msgid "Switching" msgstr "Perjungiama" msgid "The printer is busy and cannot switch AMS type." msgstr "Spausdintuvas užimtas, negalima pakeisti AMS tipo." msgid "Please unload all filament before switching." msgstr "Prieš perjungdami, išimkite (unload) visas gijas." msgid "AMS type switching needs firmware update, taking about 30s. Switch now?" msgstr "Norint pakeisti AMS tipą, reikia atnaujinti aparatinę programinę įrangą (firmware), tai užtruks apie 30 sek. Perjungti dabar?" msgid "Arrange AMS Order" msgstr "Tvarkyti AMS eiliškumą" msgid "AMS ID will be reset. If you want a specific ID sequence, disconnect all AMS before resetting and connect them in the desired order after resetting." msgstr "AMS ID bus nustatyti iš naujo. Jei norite tam tikros ID sekos, prieš nustatymą iš naujo atjunkite visus AMS įrenginius, o po jo prijunkite juos norima tvarka." msgid "File" msgstr "Failas" msgid "Calibration" msgstr "Kalibravimas" msgid "Failed to download the plug-in. Please check your firewall settings and VPN software and retry." msgstr "Nepavyko atsisiųsti papildinio. Patikrinkite savo užkardos nustatymus ir VPN programinę įrangą, ir bandykite dar kartą." msgid "Failed to install the plug-in. The plug-in file may be in use. Please restart OrcaSlicer and try again. Also check whether it is blocked or has been deleted by anti-virus software." msgstr "Nepavyko įdiegti papildinio. Papildinio failas gali būti naudojamas. Paleiskite „OrcaSlicer“ iš naujo ir bandykite dar kartą. Taip pat patikrinkite, ar jo neužblokavo arba neištrynė antivirusinė programa." msgid "Click here to see more info" msgstr "Spustelėkite norėdami gauti daugiau informacijos" msgid "The network plug-in was installed but could not be loaded. Please restart the application." msgstr "Tinklo papildinys įdiegtas, tačiau jo nepavyko įkelti. Paleiskite programą iš naujo." msgid "Restart Required" msgstr "Būtina paleisti iš naujo" msgid "Please home all axes (click " msgstr "Prašome sugrąžinti visas ašis į pradinę padėtį (spauskite " msgid ") to locate the toolhead's position. This prevents device moving beyond the printable boundary and causing equipment wear." msgstr ") norėdami nustatyti spausdinimo galvutės padėtį. Taip išvengiama, kad įrenginys judėtų už spausdinimo srities ir dėvėtųsi." msgid "Go Home" msgstr "Grįžti į pradinę padėtį" msgid "An error occurred. The system may have run out of memory, or a bug may have occurred." msgstr "Įvyko klaida. Sistemos atmintis gali būti perpildyta arba įvyko programinė klaida." #, boost-format msgid "A fatal error occurred: \"%1%\"" msgstr "Įvyko lemtinga klaida: „%1%“" msgid "Please save your project and restart the application." msgstr "Išsaugokite projektą ir iš naujo paleiskite programą." msgid "Processing G-Code from previous file…" msgstr "Vykdomas G-kodas iš prieš tai buvusio failo..." msgid "Slicing complete" msgstr "Paruošimas spausdinimui baigtas" msgid "Access violation" msgstr "Prieigos pažeidimas" msgid "Illegal instruction" msgstr "Netinkama komanda" msgid "Divide by zero" msgstr "Dalyba iš nulio" msgid "Overflow" msgstr "Perpildymas" msgid "Underflow" msgstr "Nepakankamas užpildymas" msgid "Floating reserved operand" msgstr "Slankusis rezervuotas operandas" msgid "Stack overflow" msgstr "Steko perpildymas" msgid "Running post-processing scripts" msgstr "Vykdomi papildomo apdorojimo scenarijai" msgid "Successfully executed post-processing script" msgstr "Sėkmingai vykdytas papildomas apdorojimo scenarijus" msgid "Unknown error occurred during exporting G-code." msgstr "Eksportuojant G kodą įvyko nežinoma klaida." #, boost-format msgid "" "Copying of the temporary G-code to the output G-code failed. Maybe the SD card is write locked?\n" "Error message: %1%" msgstr "" "Nepavyko nukopijuoti laikinojo G-kodo į išvesties G-kodą. Gal draudžiama įrašinėti į SD kortelę?\n" "Klaidos pranešimas: %1%" #, boost-format msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp." msgstr "Nepavyko nukopijuoti laikinojo G-kodo į išvesties G-kodą. Gali kilti problemų dėl tikslinio įrenginio. Bandykite eksportuoti dar kartą arba naudokite kitą įrenginį. Sugadintas išvesties G-kodas yra %1%.tmp." #, boost-format msgid "Renaming of the G-code after copying to the selected destination folder has failed. Current path is %1%.tmp. Please try exporting again." msgstr "Nepavyko pervardyti G-kodo nukopijavus į pasirinktą aplanką. Dabartinis kelias yra %1%.tmp. Bandykite eksportuoti dar kartą." #, boost-format msgid "Copying of the temporary G-code has finished but the original code at %1% couldn't be opened during copy check. The output G-code is at %2%.tmp." msgstr "Laikinojo G-kodo kopijavimas baigtas, bet pradinio kodo, esančio %1%, nepavyko atidaryti tikrinant kopiją. Išvesties G-kodas yra %2%.tmp." #, boost-format msgid "Copying of the temporary G-code has finished but the exported code couldn't be opened during copy check. The output G-code is at %1%.tmp." msgstr "Laikinojo G-kodo kopijavimas baigtas, bet eksportuoto kodo nepavyko atidaryti tikrinant kopiją. Išvesties G-kodas yra %1%.tmp." #, boost-format msgid "G-code file exported to %1%" msgstr "G-kodo failas eksportuotas į %1%" msgid "Unknown error with G-code export" msgstr "Nežinoma G kodo eksporto klaida." #, boost-format msgid "" "Failed to save G-code file.\n" "Error message: %1%.\n" "Source file %2%." msgstr "" "Nepavyko išsaugoti G-kodo failo.\n" "Klaidos pranešimas: %1%.\n" "Šaltinio failas: %2%." msgid "Copying of the temporary G-code to the output G-code failed." msgstr "Nepavyko nukopijuoti laikinojo G-kodo į išvesties G-kodą" #, boost-format msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue" msgstr "Planuojamas įkėlimas į „%1%“. Žr. Langas -> Serverio įkėlimų eilė (Print Host Upload Queue)" msgid "Origin" msgstr "Koordinačių pradžia (Origin)" msgid "Size in X and Y of the rectangular plate." msgstr "Stačiakampės plokštės dydis X ir Y." msgid "Distance of the 0,0 G-code coordinate from the front left corner of the rectangle." msgstr "0,0 G-kodo koordinatės atstumas nuo priekinio kairiojo stačiakampio kampo." msgid "Diameter of the print bed. It is assumed that origin (0,0) is located in the center." msgstr "Spausdinimo pagrindo skersmuo. Daroma prielaida, kad pradžia (0,0) yra centre." msgid "Rectangular" msgstr "Stačiakampis" msgid "Circular" msgstr "Apskritas" msgid "Load shape from STL..." msgstr "Įkelti formą iš STL..." msgid "Settings" msgstr "Parametrai" msgid "Remove" msgstr "Pašalinti" msgid "Not found:" msgstr "Nerasta:" msgid "Model" msgstr "Modelis" msgid "Choose an STL file to import bed shape from:" msgstr "Pasirinkite STL failą, iš kurio norite importuoti pagrindo formą:" msgid "Invalid file format." msgstr "Netinkamas failo formatas." msgid "Error: invalid model" msgstr "Klaida! Netinkamas modelis" msgid "The selected file contains no geometry." msgstr "Pasirinktame faile nėra geometrijos." msgid "The selected file contains several disjointed areas. This is not supported." msgstr "Pasirinktame faile yra keletas nesusijusių sričių. Tai nepalaikoma." msgid "Choose a file to import bed texture from (PNG/SVG):" msgstr "Pasirinkite failą pagrindo tekstūros importavimui (PNG / SVG):" msgid "Choose an STL file to import bed model from:" msgstr "Pasirinkite STL failą, iš kurio norite importuoti pagrindo modelį:" msgid "Bed Shape" msgstr "Pagrindo forma" #, c-format, boost-format msgid "A minimum temperature above %d℃ is recommended for %s.\n" msgstr "" "Medžiagai „%2$s“ rekomenduojama minimali temperatūra, aukštesnė nei %1$d ℃.\n" "\n" #, c-format, boost-format msgid "A maximum temperature below %d℃ is recommended for %s.\n" msgstr "" "Medžiagai „%2$s“ rekomenduojama maksimali temperatūra, žemesnė nei %1$d ℃.\n" "\n" msgid "The recommended minimum temperature cannot be higher than the recommended maximum temperature.\n" msgstr "Rekomenduojama minimali temperatūra negali būti aukštesnė už rekomenduojamą maksimalią temperatūrą.\n" msgid "Please check.\n" msgstr "Prašome patikrinti.\n" msgid "" "The nozzle may become clogged when the temperature is out of the recommended range.\n" "Please make sure whether to use this temperature to print.\n" "\n" msgstr "" "Jei temperatūra viršija rekomenduojamas ribas, purkštukas (nozzle) gali užsikimšti.\n" "Įsitikinkite, ar tikrai norite spausdinti pasirinkta temperatūra.\n" "\n" #, c-format, boost-format msgid "The recommended nozzle temperature for this filament type is [%d, %d] degrees Celsius." msgstr "Rekomenduojama šio tipo gijos purkštuko temperatūra yra [%d, %d] laipsnių Celsijaus." msgid "Adaptive Pressure Advance model validation failed:\n" msgstr "Nepavyko patvirtinti adaptyviojo slėgio išankstinio (Pressure Advance) modelio:\n" msgid "" "Too small max volumetric speed.\n" "Value was reset to 0.5" msgstr "" "Per mažas maksimalus tūrinis greitis.\n" "Nustatoma iš naujo į 0,5." #, c-format, boost-format msgid "Current chamber temperature is higher than the material's safe temperature; this may result in material softening and nozzle clogs. The maximum safe temperature for the material is %d" msgstr "Dabartinė kameros temperatūra yra aukštesnė už saugią medžiagos temperatūrą, dėl to medžiaga gali suminkštėti ir užkimšti purkštuką. Maksimali saugi medžiagos temperatūra yra %d." #, c-format, boost-format msgid "The minimal chamber temperature (%d℃) is higher than the target chamber temperature (%d℃). The minimal value is the threshold at which printing starts while the chamber keeps heating toward the target, so it should not exceed it. It will be clamped to the target." msgstr "Minimali kameros temperatūra (%d℃) yra aukštesnė nei tikslinė kameros temperatūra (%d℃). Minimali vertė yra slenkstis, kurį pasiekus pradedamas spausdinimas, kol kamera vis dar kaitinama iki tikslinės temperatūros, todėl ji neturėtų viršyti tikslinės. Vertė bus apribota iki tikslinės temperatūros." msgid "" "Layer height too small\n" "It has been reset to 0.2" msgstr "" "Per mažas sluoksnio aukštis.\n" "Nustatoma iš naujo į 0,2." msgid "" "Ironing spacing too small\n" "It has been reset to 0.1" msgstr "" "Per mažas lyginimo tarpas.\n" "Nustatoma iš naujo į 0,1." msgid "" "Zero initial layer height is invalid.\n" "\n" "The first layer height will be reset to 0.2." msgstr "" "Nulinis pradinio sluoksnio aukštis yra netinkamas.\n" "\n" "Pirmojo sluoksnio aukštis bus nustatytas iš naujo į 0,2." msgid "" "This setting is only used for tuning model size by small amounts.\n" "For example, when the model size has small errors or when tolerances are incorrect. For large adjustments, please use the model scale function.\n" "\n" "The value will be reset to 0." msgstr "" "Šis nustatymas naudojamas tik nedideliam modelio dydžio koregavimui.\n" "Pavyzdžiui, kai modelio dydis turi nedidelių paklaidų arba kai netinkami leistini nuokrypiai (tolerancijos). Didesniems pakeitimams naudokite modelio mastelio funkciją.\n" "\n" "Vertė bus nustatyta į 0." msgid "" "The elephant foot compensation value is too large.\n" "If there are significant elephant foot issues, please check other settings.\n" "The bed temperature may be too high, for example.\n" "\n" "The value will be reset to 0." msgstr "" "Per didelė dramblio pėdos kompensacija yra nepagrįsta.\n" "Jei iš tikrųjų pasireiškia rimtas dramblio pėdos efektas, patikrinkite kitus nustatymus.\n" "Pavyzdžiui, ar pagrindo temperatūra nėra per aukšta.\n" "\n" "Reikšmė bus atstatyta į 0." msgid "Alternate extra wall does't work well when ensure vertical shell thickness is set to All." msgstr "Alternatyvi papildoma sienelė veikia prastai, kai vertikalaus apvalkalo storio užtikrinimas nustatytas į „Visi“." msgid "" "Change these settings automatically?\n" "Yes - Change ensure vertical shell thickness to Moderate and enable alternate extra wall\n" "No - Don't use alternate extra wall" msgstr "" "Automatiškai pakeisti šiuos nustatymus?\n" "Taip – pakeisti vertikalaus apvalkalo storio užtikrinimą į „Vidutinis“ ir įjungti alternatyvią papildomą sienelę\n" "Ne – nenaudoti alternatyvios papildomos sienelės" msgid "" "Prime tower does not work when Adaptive Layer Height or Independent Support Layer Height is on.\n" "Which do you want to keep?\n" "YES - Keep Prime Tower\n" "NO - Keep Adaptive Layer Height and Independent Support Layer Height" msgstr "" "Valymo bokštas neveikia, kai įjungtas adaptyvus sluoksnio aukštis arba nepriklausomas atramų sluoksnio aukštis.\n" "Ką norite palikti?\n" "TAIP – palikti valymo bokštą\n" "NE – palikti adaptyvų sluoksnio aukštį ir nepriklausomą atramų sluoksnio aukštį" msgid "" "Prime tower does not work when Adaptive Layer Height is on.\n" "Which do you want to keep?\n" "YES - Keep Prime Tower\n" "NO - Keep Adaptive Layer Height" msgstr "" "Valymo bokštas neveikia, kai įjungtas adaptyvus sluoksnio aukštis.\n" "Ką norite palikti?\n" "TAIP – palikti valymo bokštą\n" "NE – palikti adaptyvų sluoksnio aukštį" msgid "" "Prime tower does not work when Independent Support Layer Height is on.\n" "Which do you want to keep?\n" "YES - Keep Prime Tower\n" "NO - Keep Independent Support Layer Height" msgstr "" "Valymo bokštas neveikia, kai įjungtas nepriklausomas atramų sluoksnio aukštis.\n" "Ką norite palikti?\n" "TAIP – palikti valymo bokštą\n" "NE – palikti nepriklausomą atramų sluoksnio aukštį" msgid "" "seam_slope_start_height need to be smaller than layer_height.\n" "Reset to 0." msgstr "" "„seam_slope_start_height“ turi būti mažesnis už „layer_height“\n" "Nustatoma iš naujo į 0." #, no-c-format, no-boost-format msgid "" "Lock depth should smaller than skin depth.\n" "Reset to 50% of skin depth." msgstr "" "Fiksavimo gylis turėtų būti mažesnis už išorinio sluoksnio gylį.\n" "Atstatyta į 50 % išorinio sluoksnio gylio." msgid "Both [Extrusion] and [Combined] modes of Fuzzy Skin require the Arachne Wall Generator to be enabled." msgstr "Abiems „Šiurkštaus paviršiaus“ režimams – „Ekstruzija“ ir „Kombinuotas“ – reikalaujama įjungti „Arachne“ sienelių generatorių." msgid "" "Change these settings automatically?\n" "Yes - Enable Arachne Wall Generator\n" "No - Disable Arachne Wall Generator and set [Displacement] mode of the Fuzzy Skin" msgstr "" "Automatiškai pakeisti šiuos nustatymus?\n" "Taip – įjungti „Arachne“ sienelių generatorių\n" "Ne – išjungti „Arachne“ sienelių generatorių ir nustatyti „Šiurkštaus paviršius“ režimą [Slinktis]" msgid "Spiral mode only works when wall loops is 1, support is disabled, clumping detection by probing is disabled, top shell layers is 0, sparse infill density is 0 and timelapse type is traditional." msgstr "Spiralinis režimas veikia tik tada, kai sienelės kilpų skaičius yra 1, atramos išjungtos, sulipimo aptikimas zonduojant išjungtas, viršutinių apvalkalo sluoksnių yra 0, reto užpildo tankis yra 0 %, o laiko intervalų vaizdo įrašo tipas – tradicinis." msgid " But machines with I3 structure will not generate timelapse videos." msgstr " Tačiau spausdintuvai su I3 konstrukcija negeneruos pakadrinių vaizdo įrašų." msgid "" "Change these settings automatically?\n" "Yes - Change these settings and enable spiral/vase mode automatically\n" "No - Cancel enabling spiral mode" msgstr "" "Automatiškai pakeisti šiuos nustatymus?\n" "Taip – pakeisti šiuos nustatymus ir automatiškai įjungti spiralinį režimą\n" "Ne – nenaudoti spiralinio režimo" msgid "Printing" msgstr "Spausdinimas" msgid "Auto bed leveling" msgstr "Automatinis spausdinimo pagrindo lyginimas" msgid "Heatbed preheating" msgstr "Spausdinimo pagrindo pašildymas iš anksto" msgid "Vibration compensation" msgstr "Vibracijų kompensavimas" msgid "Changing filament" msgstr "Gijos keitimas" msgid "M400 pause" msgstr "M400 pauzė" msgid "Paused (filament ran out)" msgstr "Pauzė (pasibaigė gija)" msgid "Heating nozzle" msgstr "Kaitinamas purkštukas" msgid "Calibrating dynamic flow" msgstr "Kalibruojamas dinaminis srautas" msgid "Scanning bed surface" msgstr "Skenuojamas pagrindo paviršius" msgid "Inspecting first layer" msgstr "Tikrinamas pirmasis sluoksnis" msgid "Identifying build plate type" msgstr "Identifikuojamas plokštės tipas" msgid "Calibrating Micro Lidar" msgstr "Kalibruojamas mikro lidaras" msgid "Homing toolhead" msgstr "Galvutės grąžinimas į pradinę padėtį" msgid "Cleaning nozzle tip" msgstr "Valomas purkštuko galiukas" msgid "Checking extruder temperature" msgstr "Tikrinama ekstruderio (stūmiklio) temperatūra" msgid "Paused by the user" msgstr "Pauzė (sustabdė naudotojas)" msgid "Pause (front cover fall off)" msgstr "Pauzė (nukrito priekinis dangtelis)" msgid "Calibrating the micro lidar" msgstr "Mikro lidaro kalibravimas" msgid "Calibrating flow ratio" msgstr "Kalibruojamas srauto santykis" msgid "Pause (nozzle temperature malfunction)" msgstr "Pauzė (purkštuko temperatūros sutrikimas)" msgid "Pause (heatbed temperature malfunction)" msgstr "Pauzė (pagrindo temperatūros sutrikimas)" msgid "Filament unloading" msgstr "Gijos išstūmimas" msgid "Pause (step loss)" msgstr "Pauzė (žingsnių praradimas)" msgid "Filament loading" msgstr "Gijos įtraukimas" msgid "Motor noise cancellation" msgstr "Variklių triukšmo slopinimas" msgid "Pause (AMS offline)" msgstr "Pauzė (AMS nepasiekiamas)" msgid "Pause (low speed of the heatbreak fan)" msgstr "Pauzė (per mažas „heatbreak“ ventiliatoriaus greitis)" msgid "Pause (chamber temperature control problem)" msgstr "Pauzė (kameros temperatūros kontrolės problema)" msgid "Cooling chamber" msgstr "Aušinama kamera" msgid "Pause (G-code inserted by user)" msgstr "Pauzė (naudotojo įterptas G-kodas)" msgid "Motor noise showoff" msgstr "Variklių triukšmo demonstravimas" msgid "Pause (nozzle clumping)" msgstr "Pauzė (medžiagos sankaupa ant purkštuko)" msgid "Pause (cutter error)" msgstr "Pauzė (kirpiklio klaida)" msgid "Pause (first layer error)" msgstr "Pauzė (pirmojo sluoksnio klaida)" msgid "Pause (nozzle clog)" msgstr "Pauzė (purkštuko užsikimšimas)" msgid "Measuring motion precision" msgstr "Matuojamas judesio tikslumas" msgid "Enhancing motion precision" msgstr "Didinamas judesio tikslumas" msgid "Measure motion accuracy" msgstr "Matuoti judesio tikslumą" msgid "Nozzle offset calibration" msgstr "Purkštuko poslinkio kalibravimas" msgid "High temperature auto bed leveling" msgstr "Aukštos temperatūros automatinis pagrindo lyginimas" msgid "Auto Check: Quick Release Lever" msgstr "Automatinis patikrinimas: greitojo atlaisvinimo svirtis" msgid "Auto Check: Door and Upper Cover" msgstr "Automatinis patikrinimas: durelės ir viršutinis dangtis" msgid "Laser Calibration" msgstr "Lazerio kalibravimas" msgid "Auto Check: Platform" msgstr "Automatinis patikrinimas: platforma" msgid "Confirming BirdsEye Camera location" msgstr "Patvirtinama „BirdsEye“ kameros vieta" msgid "Calibrating BirdsEye Camera" msgstr "Kalibruojama „BirdsEye“ kamera" msgid "Auto bed leveling -phase 1" msgstr "Automatinis pagrindo lyginimas – 1 fazė" msgid "Auto bed leveling -phase 2" msgstr "Automatinis pagrindo lyginimas – 2 fazė" msgid "Heating chamber" msgstr "Kaitinama kamera" msgid "Cooling heatbed" msgstr "Aušinamas spausdinimo pagrindas" msgid "Printing calibration lines" msgstr "Spausdinamos kalibravimo linijos" msgid "Auto Check: Material" msgstr "Automatinis patikrinimas: medžiaga" msgid "Live View Camera Calibration" msgstr "Tiesioginio vaizdo kameros kalibravimas" msgid "Waiting for heatbed to reach target temperature" msgstr "Laukiama, kol pagrindas pasieks tikslinę temperatūrą" msgid "Auto Check: Material Position" msgstr "Automatinis patikrinimas: medžiagos padėtis" msgid "Cutting Module Offset Calibration" msgstr "Kirpimo modulio poslinkio kalibravimas" msgid "Measuring Surface" msgstr "Matuojamas paviršius" msgid "Calibrating the detection position of nozzle clumping" msgstr "Kalibruojama medžiagos sankaupos ant purkštuko aptikimo padėtis" msgid "Update successful." msgstr "Atnaujinimas sėkmingas." msgid "Downloading failed." msgstr "Atsisiuntimas nepavyko." msgid "Verification failed." msgstr "Patikrinimas nepavyko." msgid "Update failed." msgstr "Atnaujinimas nepavyko." msgid "Timelapse is not supported on this printer." msgstr "Laiko intervalų vaizdo įrašai (timelapse) šiuame spausdintuve nepalaikomi." msgid "Timelapse is not supported while the storage does not exist." msgstr "Laiko intervalų vaizdo įrašai nepalaikomi, nes nėra atminties laikmenos." msgid "Timelapse is not supported while the storage is unavailable." msgstr "Laiko intervalų vaizdo įrašai nepalaikomi, nes atminties laikmena nepasiekiama." msgid "Timelapse is not supported while the storage is readonly." msgstr "Laiko intervalų vaizdo įrašai nepalaikomi, nes atminties laikmena yra tik skaitoma." msgid "To ensure your safety, certain processing tasks (such as laser) can only be resumed on printer." msgstr "Siekiant užtikrinti saugumą, tam tikras apdorojimo užduotis (pavyzdžiui, lazerio) galima pratęsti tik pačiame spausdintuve." #, c-format, boost-format msgid "The chamber temperature is too high, which may cause the filament to soften. Please wait until the chamber temperature drops below %d℃. You may open the front door or enable fans to cool down." msgstr "Kameros temperatūra per aukšta, todėl gija gali suminkštėti. Palaukite, kol kameros temperatūra nukris žemiau %d ℃. Norėdami pagreitinti aušinimą, galite atidaryti priekines dureles arba įjungti ventiliatorius." #, c-format, boost-format msgid "AMS temperature is too high, which may cause the filament to soften. Please wait until the AMS temperature drops below %d℃." msgstr "AMS temperatūra per aukšta, todėl gija gali suminkštėti. Palaukite, kol AMS temperatūra nukris žemiau %d ℃." msgid "The current chamber temperature or the target chamber temperature exceeds 45℃. In order to avoid extruder clogging, low temperature filament(PLA/PETG/TPU) is not allowed to be loaded." msgstr "Dabartinė arba tikslinė kameros temperatūra viršija 45 ℃. Siekiant išvengti ekstruderio (stūmiklio) užsikimšimo, žemos temperatūros gijų (PLA/PETG/TPU) įverti neleidžiama." msgid "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder. In order to avoid extruder clogging, it is not allowed to set the chamber temperature." msgstr "Ekstruderyje (stūmiklyje) yra įverta žemos temperatūros gija (PLA/PETG/TPU). Siekiant išvengti ekstruderio užsikimšimo, nustatyti kameros temperatūros neleidžiama." msgid "When you set the chamber temperature below 40℃, the chamber temperature control will not be activated, and the target chamber temperature will automatically be set to 0℃." msgstr "Nustačius kameros temperatūrą žemesnę nei 40 ℃, kameros temperatūros valdymas nebus aktyvuotas, o tikslinė kameros temperatūra automatiškai bus nustatyta į 0 ℃." msgid "Failed to start print job" msgstr "Nepavyko pradėti spausdinimo" msgid "This calibration does not support the currently selected nozzle diameter" msgstr "Ši kalibravimo procedūra nepalaiko šiuo metu pasirinkto purkštuko skersmens" msgid "Current flowrate cali param is invalid" msgstr "Dabartinis srauto santykio kalibravimo parametras yra netinkamas" msgid "Selected diameter and machine diameter do not match" msgstr "Pasirinktas skersmuo ir įrenginio skersmuo nesutampa" msgid "Failed to generate cali G-code" msgstr "Nepavyko sugeneruoti kalibravimo G-kodo" msgid "Calibration error" msgstr "Kalibravimo klaida" # AI Translated msgid "Network unavailable" msgstr "Tinklas neprieinamas" msgid "Resume Printing" msgstr "Tęsti spausdinimą" msgid "Resume (defects acceptable)" msgstr "Tęsti (defektai priimtini)" msgid "Resume (problem solved)" msgstr "Tęsti (problema išspręsta)" msgid "Stop Printing" msgstr "Nutraukti spausdinimą" msgid "Check Assistant" msgstr "Patikros asistentas" msgid "Filament Extruded, Continue" msgstr "Gija išspausta, tęsti" msgid "Not Extruded Yet, Retry" msgstr "Dar neišspausta, bandyti vėl" msgid "Finished, Continue" msgstr "Baigta, tęsti" msgid "Filament Loaded, Resume" msgstr "Gija įverta, tęsti" msgid "View Liveview" msgstr "Rodyti tiesioginį vaizdą" msgid "No Reminder Next Time" msgstr "Daugiau nepriminti" # AI Translated msgid "Recheck" msgstr "Patikrinti iš naujo" msgid "Ignore. Don't Remind Next Time" msgstr "Ignoruoti. Daugiau nepriminti" msgid "Ignore this and Resume" msgstr "Ignoruoti ir tęsti" msgid "Problem Solved and Resume" msgstr "Problema išspręsta, tęsti" msgid "Got it, Turn off the Fire Alarm." msgstr "Supratau, išjungti gaisro pavojaus signalą." msgid "Retry (problem solved)" msgstr "Bandyti vėl (problema išspręsta)" msgid "Stop Drying" msgstr "Stabdyti džiovinimą" msgid "Proceed" msgstr "Tęsti" # AI Translated msgid "Abort" msgstr "Nutraukti" # AI Translated msgid "Disable Purification for This Print" msgstr "Išjungti oro valymą šiam spausdinimui" # AI Translated msgid "Don't Remind Me" msgstr "Nepriminti man" msgid "Retry" msgstr "Kartoti" msgid "Resume" msgstr "Tęsti" msgid "Unknown error." msgstr "Nežinoma klaida." # AI Translated msgid "Loading ..." msgstr "Įkeliama ..." msgid "default" msgstr "numatytasis" #, boost-format msgid "Edit Custom G-code (%1%)" msgstr "Redaguoti pasirinktinį G-kodą (%1%)" msgid "Built-in placeholders (Double click item to add to G-code)" msgstr "Integruoti kintamieji (dukart spustelėkite elementą, kad įterptumėte į G-kodą)" msgid "Search G-code placeholders" msgstr "Ieškoti G-kodo kintamųjų" msgid "Add selected placeholder to G-code" msgstr "Įtraukti pasirinktą kintamąjį į G-kodą" msgid "Select placeholder" msgstr "Pasirinkti kintamąjį" msgid "[Global] Slicing State" msgstr "[Visuotinė] Sluoksniavimo būsena" msgid "Read Only" msgstr "Tik skaitoma" msgid "Read Write" msgstr "Skaitymas ir rašymas" msgid "Slicing State" msgstr "Sluoksniavimo būsena" msgid "Print Statistics" msgstr "Spausdinimo statistika" msgid "Objects Info" msgstr "Objektų informacija" msgid "Dimensions" msgstr "Matmenys" msgid "Temperatures" msgstr "Temperatūros" msgid "Timestamps" msgstr "Laiko žymės" #, boost-format msgid "Specific for %1%" msgstr "Būdingas %1%" msgid "Presets" msgstr "Profiliai" msgid "Print settings" msgstr "Spausdinimo nustatymai" msgid "Filament settings" msgstr "Gijos nustatymai" msgid "SLA Materials settings" msgstr "SLA medžiagų nustatymai" msgid "Printer settings" msgstr "Spausdintuvo nustatymai" msgid "parameter name" msgstr "parametro pavadinimas" msgid "layers" msgstr "sluoksniai" msgid "Range" msgstr "Diapazonas" msgid "Empty string" msgstr "Tuščia eilutė" msgid "Value is out of range." msgstr "Reikšmė yra už ribų." #, c-format, boost-format msgid "%s can’t be a percentage" msgstr "%s negali būti išreikštas procentais" #, c-format, boost-format msgid "Value %s is out of range, continue?" msgstr "Reikšmė %s yra už ribų, tęsti?" msgid "Parameter validation" msgstr "Parametrų patvirtinimas" #, c-format, boost-format msgid "Value %s is out of range. The valid range is from %d to %d." msgstr "Reikšmė %s yra už ribų. Galimas diapazonas yra nuo %d iki %d." #, c-format, boost-format msgid "" "Is it %s%% or %s %s?\n" "YES for %s%%, \n" "NO for %s %s." msgstr "" "Ar tai %s%% ar %s %s?\n" "TAIP %s%%, \n" "NE %s %s." #, boost-format msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\"" msgstr "Netinkamas įvesties formatas. Numatytas matmenų vektorius tokiu formatu: \"%1%\"" msgid "Input value is out of range" msgstr "Įvesta reikšmė yra už ribų" msgid "Some extension in the input is invalid" msgstr "Kai kurie įvesties formato plėtiniai yra netinkami" msgid "This parameter expects a valid template." msgstr "Šiam parametrui reikalingas tinkamas šablonas." msgid "Invalid pattern. Use N, N#K, or a comma-separated list with optional #K per entry. Examples: 5, 5#2, 1,7,9, 5,9#2,18." msgstr "Neteisingas šablonas. Naudokite N, N#K arba kableliais atskirtą sąrašą su pasirinktiniu #K kiekvienam įrašui. Pavyzdžiai: 5, 5#2, 1,7,9, 5,9#2,18." #, boost-format msgid "Invalid format. Expected vector format: \"%1%\"" msgstr "Netinkamas formatas. Tinkamas vektorinis formatas: \"%1%\"" msgid "N/A" msgstr "N/A" # AI Translated msgid "System agents" msgstr "Sisteminiai agentai" # AI Translated msgid "No plugin selected" msgstr "Nepasirinktas joks papildinys" # AI Translated msgid "Add plugin" msgstr "Pridėti papildinį" # AI Translated msgid "Select plugin" msgstr "Pasirinkti papildinį" # AI Translated msgid "Remove plugin" msgstr "Pašalinti papildinį" # AI Translated msgid "Configure" msgstr "Konfigūruoti" # AI Translated #, c-format, boost-format msgid "Configure (%d)" msgstr "Konfigūruoti (%d)" msgid "Pick" msgstr "Paimti" msgid "Summary" msgstr "Santrauka" msgid "Layer Height" msgstr "Sluoksnio aukštis" msgid "Line Width" msgstr "Linijos plotis" msgid "Actual Speed" msgstr "Faktinis greitis" msgid "Acceleration" msgstr "Pagreitis" msgid "Jerk" msgstr "Trūktelėjimas" msgid "Fan Speed" msgstr "Ventiliatoriaus greitis" msgid "Flow" msgstr "Srautas" msgid "Actual Flow" msgstr "Faktinis srautas" msgid "Tool" msgstr "Įrankis" msgid "Layer Time" msgstr "Sluoksnio laikas" msgid "Layer Time (log)" msgstr "Sluoksnio laikas (log)" msgid "Pressure Advance" msgstr "Slėgio išankstinis valdymas (Pressure Advance)" msgid "Noop" msgstr "Tuščia operacija (Noop)" msgid "Retract" msgstr "Gijos įtraukimas (Retract)" msgid "Unretract" msgstr "Gijos grąžinimas (Unretract)" msgid "Seam" msgstr "Siūlė" msgid "Tool Change" msgstr "Įrankio keitimas" msgid "Color Change" msgstr "Spalvos keitimas" msgid "Pause Print" msgstr "Spausdinimo pristabdymas" msgid "Travel" msgstr "Tuščioji eiga (Travel)" msgid "Wipe" msgstr "Valymas (Wipe)" msgid "Extrude" msgstr "Ekstruzija (Išspaudimas)" msgid "Inner wall" msgstr "Vidinė sienelė" msgid "Outer wall" msgstr "Išorinė sienelė" msgid "Overhang wall" msgstr "Pakibusios dalies sienelė (Overhang)" msgid "Sparse infill" msgstr "Retas užpildas" msgid "Internal solid infill" msgstr "Vidinis vientisas užpildas" msgid "Top surface" msgstr "Viršutinis paviršius" msgid "Bridge" msgstr "Tiltas" msgid "Gap infill" msgstr "Tarpų užpildas" msgid "Skirt" msgstr "Apvadas" msgid "Support interface" msgstr "Atramų sąsaja" msgid "Prime tower" msgstr "Valymo bokštas" msgid "Bottom surface" msgstr "Apatinis paviršius" msgid "Internal bridge" msgstr "Vidinis tiltelis" msgid "Support transition" msgstr "Atramų perėjimas" msgid "Mixed" msgstr "Mišrus" msgid "Height: " msgstr "Aukštis: " msgid "Width: " msgstr "Plotis: " msgid "Flow: " msgstr "Srautas: " msgid "Fan: " msgstr "Ventiliatorius: " msgid "Temperature: " msgstr "Temperatūra: " msgid "Layer Time: " msgstr "Sluoksnio laikas: " msgid "Tool: " msgstr "Įrankis: " msgid "Color: " msgstr "Spalva: " msgid "Acceleration: " msgstr "Pagreitis: " msgid "Jerk: " msgstr "Trūktelėjimas: " msgid "PA: " msgstr "PA: " msgid "mm/s" msgstr "mm/s" msgid "mm/s²" msgstr "mm/s²" msgid "mm³/s" msgstr "mm³/s" msgid "Flow rate" msgstr "Tūrinis srautas (Flow rate)" msgid "Fan speed" msgstr "Ventiliatoriaus greitis" msgid "Time" msgstr "Laikas" msgid "Speed: " msgstr "Greitis: " msgid "Actual speed profile" msgstr "Faktinis greičio profilis" msgid "Statistics of All Plates" msgstr "Visų plokščių statistika" msgid "Display" msgstr "Rodyti" msgid "Flushed" msgstr "Pašalinta" msgid "Tower" msgstr "Bokštas" msgid "Total" msgstr "Iš viso" msgid "Total estimation" msgstr "Bendras įvertis (skaičiavimas)" msgid "Total time" msgstr "Bendras laikas" msgid "Total cost" msgstr "Bendra kaina" msgid "Automatically re-slice according to the optimal filament grouping, and the grouping results will be displayed after slicing." msgstr "Automatiškai pjaustyti iš naujo pagal optimalų gijų grupavimą, o grupavimo rezultatai bus parodyti po pjaustymo." msgid "Filament Grouping" msgstr "Gijų grupavimas" msgid "Why this grouping" msgstr "Kodėl šis grupavimas" msgid "Please place filaments on the printer based on grouping result." msgstr "Prašome sudėti gijas spausdintuve vadovaujantis grupavimo rezultatais." msgid "Tips:" msgstr "Patarimai:" msgid "Current grouping of slice result is not optimal." msgstr "Dabartinis pjaustymo rezultatų grupavimas nėra optimalus." #, boost-format msgid "Increase %1%g filament and %2% changes compared to optimal grouping." msgstr "Sunaudojama %1% g daugiau gijos ir atliekama %2% keitimų daugiau, lyginant su optimaliu grupavimu." #, boost-format msgid "Increase %1%g filament and save %2% changes compared to optimal grouping." msgstr "Sunaudojama %1% g daugiau gijos ir sutaupoma %2% keitimų, lyginant su optimaliu grupavimu." #, boost-format msgid "Save %1%g filament and increase %2% changes compared to optimal grouping." msgstr "Sutaupoma %1% g gijos ir atliekama %2% keitimų daugiau, lyginant su optimaliu grupavimu." #, boost-format msgid "Save %1%g filament and %2% changes compared to a printer with one nozzle." msgstr "Sutaupoma %1% g gijos ir %2% keitimų, lyginant su vieno purkštuko spausdintuvu." #, boost-format msgid "Save %1%g filament and increase %2% changes compared to a printer with one nozzle." msgstr "Sutaupoma %1% g gijos ir atliekama %2% keitimų daugiau, lyginant su vieno purkštuko spausdintuvu." #, boost-format msgid "Increase %1%g filament and save %2% changes compared to a printer with one nozzle." msgstr "Sunaudojama %1% g daugiau gijos ir sutaupoma %2% keitimų, lyginant su vieno purkštuko spausdintuvu." msgid "Set to Optimal" msgstr "Nustatyti į optimalų" msgid "Regroup filament" msgstr "Pergrupuoti gijas" msgid "up to" msgstr "iki" msgid "above" msgstr "virš" msgid "from" msgstr "nuo" msgid "Usage" msgstr "Naudojimas" msgid "Layer height (mm)" msgstr "Sluoksnio aukštis (mm)" msgid "Line width (mm)" msgstr "Linijos plotis (mm)" msgid "Speed (mm/s)" msgstr "Greitis (mm/s)" msgid "Actual Speed (mm/s)" msgstr "Faktinis greitis (mm/s)" msgid "Acceleration (mm/s²)" msgstr "Pagreitis (mm/s²)" msgid "Jerk (mm/s)" msgstr "Trūktelėjimas (mm/s)" msgid "Fan speed (%)" msgstr "Ventiliatoriaus greitis (%)" msgid "Temperature (℃)" msgstr "Temperatūra (℃)" msgid "Volumetric flow rate (mm³/s)" msgstr "Tūrinis srautas (mm³/s)" msgid "Actual volumetric flow rate (mm³/s)" msgstr "Faktinis tūrinis srautas (mm³/s)" msgid "Seams" msgstr "Siūlės" msgid "Filament changes" msgstr "Gijos keitimai" msgid "Options" msgstr "Parinktys" msgid "Cost" msgstr "Kaina" msgid "Filament change times" msgstr "Gijų keitimo laikai" msgid "Tool changes" msgstr "Įrankio keitimai" msgid "Color change" msgstr "Spalvos keitimas" msgctxt "Noun" msgid "Print" msgstr "Spausdinti" msgid "Printer" msgstr "Spausdintuvas" msgid "Time Estimation" msgstr "Laiko įvertis (skaičiavimas)" msgid "Normal mode" msgstr "Normalusis režimas" msgid "Total Filament" msgstr "Gijos iš viso" msgid "Model Filament" msgstr "Modelio gija" msgid "Prepare time" msgstr "Paruošimo laikas" msgid "Model printing time" msgstr "Modelio spausdinimo laikas" msgid "Show stealth mode" msgstr "Rodyti slaptąjį režimą" msgid "Show normal mode" msgstr "Rodyti normalųjį režimą" msgid "" "An object is placed in the left/right nozzle-only area or exceeds the printable height of the left nozzle.\n" "Please ensure the filaments used by this object are not arranged to other nozzles." msgstr "" "Objektas yra pastatytas tik kairiajam / dešiniajam purkštukui skirtoje zonoje arba viršija kairiojo purkštuko spausdinimo aukštį.\n" "Įsitikinkite, kad šio objekto naudojamos gijos nėra priskirtos kitiems purkštukams." msgid "" "An object is laid over the boundary of plate or exceeds the height limit.\n" "Please solve the problem by moving it totally on or off the plate, and confirming that the height is within the build volume." msgstr "" "Objektas peržengia plokštės ribas arba viršija aukščio ribą.\n" "Išspręskite problemą visiškai perkeliami jį ant plokštės arba nuimdami nuo jos ir įsitikindami, kad aukštis neviršija spausdinimo tūrio." msgid "Variable layer height" msgstr "Kintamas sluoksnio aukštis" msgid "Adaptive" msgstr "Adaptyvus" msgid "Quality / Speed" msgstr "Kokybė / Greitis" # AI Translated msgctxt "Mesh action" msgid "Smooth" msgstr "Glotninti" msgid "Radius" msgstr "Spindulys" msgid "Keep min" msgstr "Išlaikyti minimumą" msgid "Add detail" msgstr "Pridėti detalumą" msgid "Remove detail" msgstr "Pašalinti detalumą" msgid "Reset to base" msgstr "Atstatyti į pradinį" msgid "Smoothing" msgstr "Glotninimas" msgid "Increase/decrease edit area" msgstr "Padidinti / sumažinti redagavimo plotą" msgid "Sequence" msgstr "Seka" msgid "Object selection" msgstr "Objekto pasirinkimas" msgid "number keys" msgstr "skaičių klavišai" msgid "Number keys can quickly change the color of objects" msgstr "Skaičių klavišais galima greitai pakeisti objektų spalvas" msgid "Following objects are laid over the boundary of plate or exceeds the height limit:\n" msgstr "Šie objektai peržengia plokštės ribas arba viršija aukščio ribą:\n" msgid "Please solve the problem by moving it totally on or off the plate, and confirming that the height is within the build volume.\n" msgstr "" "Išspręskite problemą visiškai perkeldami objektą ant plokštės arba nuimdami nuo jos ir įsitikindami, kad aukštis neviršija spausdinimo tūrio.\n" "\n" #, c-format, boost-format msgid "The position or size of some models exceeds the %s's printable range." msgstr "Kai kurių modelių padėtis arba dydis viršija „%s“ spausdinimo sritį." #, c-format, boost-format msgid "The position or size of the model %s exceeds the %s's printable range." msgstr "Modelio %s padėtis arba dydis viršija „%s“ spausdinimo sritį." msgid " Please check and adjust the part's position or size to fit the printable range:\n" msgstr "Patikrinkite ir pakoreguokite detalės padėtį arba dydį, kad ji tilptų į spausdinimo sritį:\n" #, boost-format msgid "Left nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%\n" msgstr "" "Kairysis purkštukas: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%\n" "\n" #, boost-format msgid "Right nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%" msgstr "Dešinysis purkštukas: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%" msgid "Tool move" msgstr "Įrankio judėjimas" msgid "Tool Rotate" msgstr "Įrankis: sukimas" msgid "Move object" msgstr "Perkelti objektą" msgid "Auto orientation options" msgstr "Automatinio orientavimo parametrai" msgid "Enable rotation" msgstr "Leisti sukimą" msgid "Optimize support interface area" msgstr "Optimizuoti atramų sąsajos plotą" msgid "Orient" msgstr "Orientacija" msgid "Arrange options" msgstr "Išdėstymo parinktys" msgid "0 means auto spacing." msgstr "0 reiškia automatinį atstumą." msgid "Auto rotate for arrangement" msgstr "Automatinis pasukimas išdėstant" msgid "Allow multiple materials on same plate" msgstr "Leisti skirtingas medžiagas ant tos pačios plokštės" msgid "Avoid extrusion calibration region" msgstr "Vengti ekstruzijos kalibravimo srities" msgid "Align to Y axis" msgstr "Išlygiuoti pagal Y ašį" # AI Translated msgctxt "Camera View" msgid "Front" msgstr "Priekis" # AI Translated msgctxt "Camera View" msgid "Back" msgstr "Galas" # AI Translated #. TRN To be shown in the main menu View->Top msgctxt "Camera View" msgid "Top" msgstr "Viršus" # AI Translated #. TRN To be shown in the main menu View->Bottom msgctxt "Camera View" msgid "Bottom" msgstr "Apačia" msgctxt "Camera View" msgid "Left" msgstr "Kairė" msgctxt "Camera View" msgid "Right" msgstr "Dešinė" msgid "Add" msgstr "Įtraukti" msgid "Add plate" msgstr "Įtraukti plokštę" msgid "Auto orient all/selected objects" msgstr "Automatiškai orientuoti visus / pasirinktus objektus" msgid "Auto orient all objects on current plate" msgstr "Automatiškai orientuoti visus objektus dabartinėje plokštėje" msgid "Arrange all objects" msgstr "Išdėstyti visus objektus" msgid "Arrange objects on selected plates" msgstr "Išdėstyti objektus pasirinktose plokštėse" msgid "Split to objects" msgstr "Padalinti į objektus" msgid "Assembly View" msgstr "Surinkimo vaizdas" msgid "Select Plate" msgstr "Pasirinkti plokštę" msgid "Slicing" msgstr "Pjaustoma (Sluoksniuojama)" msgid "Slice all" msgstr "Pjaustyti (Sluoksniuoti) viską" msgid "Failed" msgstr "Nepavyko" msgid "All Plates" msgstr "Visos plokštės" msgid "Stats" msgstr "Statistika" msgid "Slice" msgstr "Sluoksniuoti" msgid "Review" msgstr "Recenzija" msgid "Assembly Return" msgstr "Grįžti iš surinkimo vaizdo" msgid "Return" msgstr "Grąžinti" msgid "Canvas Toolbar" msgstr "Drobės įrankių juosta" msgid "Fit camera to scene or selected object." msgstr "Talpinti kamerą pagal sceną arba pasirinktą objektą." msgid "3D Navigator" msgstr "3D navigatorius" msgid "Zoom button" msgstr "Mastelio keitimo (artinimo) mygtukas" msgid "Overhangs" msgstr "Iškyšos" msgid "Outline" msgstr "Kontūras" msgid "Wireframe" msgstr "Rodyti karkasinį vaizdą" msgid "Realistic View" msgstr "Realistiškas vaizdas" msgid "Perspective" msgstr "Perspektyva" msgid "Axes" msgstr "Ašys" msgid "Gridlines" msgstr "Tinklelio linijos" msgid "Labels" msgstr "Etiketės (Užrašai)" msgid "Paint Toolbar" msgstr "Piešimo įrankių juosta" msgid "Explosion Ratio" msgstr "Išskaidymo koeficientas (Explosion Ratio)" msgid "Section View" msgstr "Pjūvio vaizdas" msgid "Assembly Control" msgstr "Surinkimas" msgid "Selection Mode" msgstr "Pasirinkimo režimas" msgid "Total Volume:" msgstr "Visas tūris:" msgid "Assembly Info" msgstr "Surinkimo informacija" msgid "Volume:" msgstr "Tūris:" msgid "Size:" msgstr "Dydis:" #, c-format, boost-format msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)." msgstr "Rasta G-kodo trajektorijų konfliktų %d sluoksnyje, Z = %.2lfmm. Prašome labiau atskirti konfliktuojančius objektus (%s <-> %s)." msgid "An object is laid over the plate boundaries." msgstr "Objektas peržengia plokštės ribas." msgid "A G-code path goes beyond the max print height." msgstr "G-kodo trajektorija viršija maksimalų spausdinimo aukštį." msgid "A G-code path goes beyond plate boundaries." msgstr "G-kodo trajektorija išeina už plokštės ribų." msgid "Not support printing 2 or more TPU filaments." msgstr "Nepalaikomas 2 ar daugiau TPU gijų spausdinimas." #, c-format, boost-format msgid "Tool %d" msgstr "%d įrankis" #, c-format, boost-format msgid "Filament %s is placed in the %s, but the generated G-code path exceeds the printable range of the %s." msgstr "Gija %s yra įstatyta į „%s“, tačiau sugeneruota G-kodo trajektorija viršija „%s“ spausdinimo sritį." #, c-format, boost-format msgid "Filaments %s are placed in the %s, but the generated G-code path exceeds the printable range of the %s." msgstr "Gijos %s yra įstatytos į „%s“, tačiau sugeneruota G-kodo trajektorija viršija „%s“ spausdinimo sritį." #, c-format, boost-format msgid "Filament %s is placed in the %s, but the generated G-code path exceeds the printable height of the %s." msgstr "Gija %s yra įstatyta į „%s“, tačiau sugeneruota G-kodo trajektorija viršija „%s“ spausdinimo aukštį." #, c-format, boost-format msgid "Filaments %s are placed in the %s, but the generated G-code path exceeds the printable height of the %s." msgstr "Gijos %s yra įstatytos į „%s“, tačiau sugeneruota G-kodo trajektorija viršija „%s“ spausdinimo aukštį." msgid "Open wiki for more information." msgstr "Atidaryti „wiki“ puslapį, norint gauti daugiau informacijos." msgid "Only the object being edited is visible." msgstr "Matomas tik redaguojamas objektas." #, c-format, boost-format msgid "Filaments %s cannot be printed directly on the surface of this plate." msgstr "Gijų %s negalima spausdinti tiesiai ant šios plokštės paviršiaus." msgid "PLA and PETG filaments detected in the mixture. Adjust parameters according to the Wiki to ensure print quality." msgstr "Mišinyje aptiktos PLA ir PETG gijos. Norėdami užtikrinti spausdinimo kokybę, pakoreguokite parametrus pagal „Wiki“ vadovą." msgid "The prime tower extends beyond the plate boundary." msgstr "Valymo bokštas peržengia plokštės ribas." msgid "Partial flushing volume set to 0. Multi-color printing may cause color mixing in models. Please readjust flushing settings." msgstr "Dalinio valymo tūris nustatytas į 0. Spausdinant keliomis spalvomis, modeliuose gali susimaišyti spalvos. Iš naujo sureguliuokite valymo nustatymus." msgid "Click Wiki for help." msgstr "Spustelėkite „Wiki“, jei reikia pagalbos." msgid "Click here to regroup" msgstr "Spustelėkite čia, kad pergrupuotumėte" msgid "Flushing Volume" msgstr "Valymo tūris" msgid "Calibration step selection" msgstr "Kalibravimo žingsnio pasirinkimas" msgid "Micro lidar calibration" msgstr "Mikro lidaro kalibravimas" msgid "Bed leveling" msgstr "Spausdinimo pagrindo išlyginimas" msgid "High-temperature Heatbed Calibration" msgstr "Aukštos temperatūros pagrindo kalibravimas" msgid "Nozzle clumping detection Calibration" msgstr "Medžiagos sankaupos ant purkštuko aptikimo kalibravimas" msgid "Calibration program" msgstr "Kalibravimo programa" msgid "" "The calibration program detects the status of your device automatically to minimize deviation.\n" "It keeps the device performing optimally." msgstr "" "Kalibravimo programa automatiškai nustato jūsų įrenginio būseną, kad minimaliai nukryptų nuo parametrų.\n" "Taip ji užtikrina optimalų įrenginio veikimą." msgid "Calibration Flow" msgstr "Kalibravimo eiga" msgid "Start Calibration" msgstr "Pradėti kalibravimą" msgid "Completed" msgstr "Užbaigta" msgid "Calibrating" msgstr "Kalibruojama" msgid "No step selected" msgstr "Nepasirinktas žingsnis" msgid "Auto-record Monitoring" msgstr "Automatinio įrašymo stebėjimas" msgid "Go Live" msgstr "Rodyti tiesioginį vaizdą" msgid "Liveview Retry" msgstr "Pakartoti tiesioginio vaizdo įkėlimą" msgid "Resolution" msgstr "Skiriamoji geba" msgid "Enable" msgstr "Įjungti" msgid "Hostname or IP" msgstr "Mazgo vardas (Hostname) arba IP" msgid "Custom camera source" msgstr "Pasirinktinis kameros šaltinis" msgid "Show \"Live Video\" guide page." msgstr "Rodyti tiesioginio vaizdo vadovo puslapį." msgid "Connect Printer (LAN)" msgstr "Prijungti spausdintuvą (LAN)" msgid "Please input the printer access code:" msgstr "Įveskite spausdintuvo prieigos kodą:" msgid "" "You can find it in \"Settings > Network > Access code\"\n" "on the printer, as shown in the figure:" msgstr "" "Jį rasite spausdintuvo meniu „Nustatymai > Tinklas > Prieigos kodas“,\n" " kaip parodyta paveikslėlyje:" msgid "" "You can find it in \"Setting > Setting > LAN only > Access Code\"\n" "on the printer, as shown in the figure:" msgstr "" "Jį rasite spausdintuvo meniu „Nustatymai > Nustatymai > Tik LAN > Prieigos kodas“, \n" "kaip parodyta paveikslėlyje:" msgid "Invalid input" msgstr "Netinkama įvestis." msgid "New Window" msgstr "Naujas langas" msgid "Open a new window" msgstr "Atidaryti naują langą" msgid "Closing application" msgstr "Programa uždaroma" msgid "Closing Application while some presets are modified." msgstr "Programa uždaroma, nors kai kurie profiliai yra pakeisti." msgid "Logging" msgstr "Registravimas" msgid "Prepare" msgstr "Paruošimas" msgid "Preview" msgstr "Peržiūra" msgid "Device" msgstr "Įrenginys" msgid "Multi-device" msgstr "Kelių įrenginių valdymas (Multi-device)" msgid "Project" msgstr "Projektas" msgid "Yes" msgstr "Taip" msgid "No" msgstr "Ne" msgid "will be closed before creating a new model. Do you want to continue?" msgstr "bus uždarytas prieš sukuriant naują modelį. Ar norite tęsti?" msgid "Slice plate" msgstr "Pjaustyti (Sluoksniuoti) plokštę" msgid "Print plate" msgstr "Spausdinti plokštę" msgid "Export G-code file" msgstr "Eksportuoti G-kodo failą" msgctxt "Verb" msgid "Print" msgstr "Spausdinti" msgid "Export plate sliced file" msgstr "Eksportuoti supjaustytos plokštės failą" msgid "Send" msgstr "Siųsti" msgid "Export all sliced file" msgstr "Eksportuoti visko supjaustyto failą" msgid "Print all" msgstr "Spausdinti viską" msgid "Send all" msgstr "Siųsti viską" msgid "Send to Multi-device" msgstr "Siųsti į kelis įrenginius" msgid "Keyboard Shortcuts" msgstr "Spartieji klavišai" msgid "Show the list of keyboard shortcuts" msgstr "Rodyti sparčiųjų klavišų sąrašą" msgid "Setup Wizard" msgstr "Nustatymų vedlys" msgid "Show Configuration Folder" msgstr "Rodyti konfigūravimo katalogą" msgid "Troubleshoot Center" msgstr "Pagalbos centras" msgid "Open Network Test" msgstr "Atidaryti tinklo testą" msgid "Show Tip of the Day" msgstr "Rodyti dienos patarimą" msgid "Check for Updates" msgstr "Tikrinti atnaujinimus" #, c-format, boost-format msgid "&About %s" msgstr "&Apie %s" msgid "Upload Models" msgstr "Įkelti modelius" msgid "Download Models" msgstr "Atsisiųsti modelius" msgid "Default View" msgstr "Numatytasis vaizdas" msgid "Top View" msgstr "Vaizdas iš viršaus" msgid "Bottom View" msgstr "Vaizdas iš apačios" msgid "Front View" msgstr "Vaizdas iš priekio" # AI Translated msgctxt "Camera View" msgid "Rear" msgstr "Galas" msgid "Rear View" msgstr "Vaizdas iš galo" msgid "Left View" msgstr "Vaizdas iš kairės" msgid "Right View" msgstr "Vaizdas iš dešinės" msgid "Start a new window" msgstr "Atidaryti naują langą" msgid "New Project" msgstr "Naujas projektas" msgid "Start a new project" msgstr "Pradėti naują projektą" msgid "Open a project file" msgstr "Atidaryti projekto failą" msgid "Recent files" msgstr "Paskutinieji failai" msgid "Save Project" msgstr "Išsaugoti projektą" msgid "Save current project to file" msgstr "Išsaugoti dabartinį projektą į failą" msgid "Save Project as" msgstr "Įrašyti projektą kaip" msgid "Save current project as" msgstr "Įrašyti dabartinį projektą kaip" msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF" msgstr "Importuoti 3MF/STL/STEP/SVG/OBJ/AMF" msgid "Load a model" msgstr "Įkelti modelį" msgid "Import Zip Archive" msgstr "Importuoti Zip archyvą" msgid "Load models contained within a zip archive" msgstr "Įkelti modelius iš ZIP archyvo" msgid "Import Configs" msgstr "Importuoti konfigūracijas" msgid "Load configs" msgstr "Įkelti konfigūracijas" msgid "Import" msgstr "Importuoti" msgid "Export all objects as one STL" msgstr "Eksportuoti visus objektus kaip vieną STL" msgid "Export all objects as STLs" msgstr "Eksportuoti visus objektus kaip STL" msgid "Export all objects as one DRC" msgstr "Eksportuoti visus objektus kaip vieną DRC" msgid "Export all objects as DRCs" msgstr "Eksportuoti visus objektus kaip DRC" msgid "Export Generic 3MF" msgstr "Eksportuoti bendrąjį (Generic) 3MF" msgid "Export 3MF file without using some 3mf-extensions" msgstr "Eksportuoti 3MF failą nenaudojant kai kurių 3MF plėtinių" msgid "Export current sliced file" msgstr "Eksportuoti dabartinį supjaustytą failą" msgid "Export all plate sliced file" msgstr "Eksportuoti visų supjaustytų plokščių failą" msgid "Export G-code" msgstr "Eksportuoti G-kodą" msgid "Export current plate as G-code" msgstr "Eksportuoti dabartinę plokštę kaip G-kodą" msgid "Export toolpaths as OBJ" msgstr "Eksportuoti įrankių trajektorijas OBJ formatu" msgid "Export Preset Bundle" msgstr "Eksportuoti profilių rinkinį" msgid "Export current configuration to files" msgstr "Eksportuoti dabartinę konfigūraciją į failus" msgid "Export" msgstr "Eksportuoti" msgid "Quit" msgstr "Išeiti" msgid "Undo" msgstr "Atšaukti" msgid "Redo" msgstr "Perdaryti" msgid "Cut" msgstr "Iškirpti" msgid "Cut selection to clipboard" msgstr "Iškirpti pasirinkimą į mainų sritį" msgid "Copy" msgstr "Kopijuoti" msgid "Copy selection to clipboard" msgstr "Nukopijuoti pasirinkimą į mainų sritį" msgid "Paste" msgstr "Įklijuoti" msgid "Paste clipboard" msgstr "Įklijuoti iš mainų srities" msgid "Delete Selected" msgstr "Ištrinti pasirinktus" msgid "Deletes the current selection" msgstr "Ištrina dabartinį pasirinkimą" msgid "Deletes all objects" msgstr "Ištrina visus objektus" msgid "Clone Selected" msgstr "Klonuoti pasirinktą" msgid "Clone copies of selections" msgstr "Klonuoti pasirinktus objektus" msgid "Duplicate Current Plate" msgstr "Dubliuoti dabartinę plokštę" msgid "Duplicate the current plate" msgstr "Dubliuoti dabartinę plokštę" msgid "Selects all objects" msgstr "Pasirenka visus objektus" msgid "Deselects all objects" msgstr "Panaikina visų objektų pasirinkimą" msgid "Use Perspective View" msgstr "Naudoti perspektyvinį vaizdą" msgid "Use Orthogonal View" msgstr "Naudoti ortografinį vaizdą" msgid "Auto Perspective" msgstr "Automatinė perspektyva" msgid "Automatically switch between orthographic and perspective when changing from top/bottom/side views." msgstr "Automatiškai perjungti tarp ortografinio ir perspektyvinio vaizdo, keičiant vaizdus iš viršaus / apačios / šonų." msgid "Show &G-code Window" msgstr "Rodyti &G-kodo langą" msgid "Show G-code window in Preview scene." msgstr "Rodyti G-kodo langą peržiūros režime." msgid "Show 3D Navigator" msgstr "Rodyti 3D navigatorių" msgid "Show 3D navigator in Prepare and Preview scene." msgstr "Rodyti 3D navigatorių paruošimo ir peržiūros režimuose." msgid "Show Gridlines" msgstr "Rodyti tinklelio linijas" msgid "Show Gridlines on plate" msgstr "Rodyti tinklelio linijas ant plokštės" msgid "Reset Window Layout" msgstr "Atstatyti lango išdėstymą" msgid "Reset to default window layout" msgstr "Atstatyti į pradinį lango išdėstymą" msgid "Show &Labels" msgstr "Rodyti &užrašus (etiketes)" msgid "Show object labels in 3D scene." msgstr "3D scenoje rodyti objektų užrašus." msgid "Show &Overhang" msgstr "Rodyti paki&busias dalis (Overhangs)" msgid "Show object overhang highlight in 3D scene." msgstr "3D scenoje paryškinti pakibusias dalis (overhangs)." msgid "Show Selected Outline (beta)" msgstr "Rodyti pasirinktą kontūrą (beta)" msgid "Show outline around selected object in 3D scene." msgstr "Rodyti kontūrą aplink pasirinktą objektą 3D scenoje." msgid "Preferences" msgstr "Parinktys" # AI Translated msgctxt "Menu" msgid "Edit" msgstr "Redaguoti" msgid "View" msgstr "Vaizdas" msgid "Preset Bundle" msgstr "Profilių rinkinys" msgid "Sync Presets" msgstr "Sinchronizuoti profilius" msgid "Pull and apply the latest presets from OrcaCloud" msgstr "Atsisiųsti ir pritaikyti naujausius profilius iš „OrcaCloud“" msgid "You must be logged in to sync presets from cloud." msgstr "Norėdami sinchronizuoti profilius iš debesies, turite būti prisijungę." msgid "Syncing presets from cloud…" msgstr "Sinchronizuojami profiliai iš debesies…" msgid "Help" msgstr "Pagalba" msgid "Temperature Calibration" msgstr "Temperatūros kalibravimas" msgid "Max flowrate" msgstr "Maksimalus tūrinis srautas" msgid "Pressure advance" msgstr "Slėgio kompensavimas (Pressure Advance)" msgid "Flow ratio" msgstr "Srauto santykis" msgid "Flow Rate Calibration" msgstr "Tūrinio srauto kalibravimas" msgid "Retraction" msgstr "Atitraukimas (Retraction)" msgid "Cornering" msgstr "Posūkiai" msgid "Cornering calibration" msgstr "Posūkių (greičio valdymo) kalibravimas" msgid "Input Shaping Frequency" msgstr "Įvesties formavimo dažnis" msgid "Input Shaping Damping/zeta factor" msgstr "Įvesties formavimo slopinimo (zeta) koeficientas" msgid "Input Shaping" msgstr "Įvesties formavimas" msgid "VFA" msgstr "VFA (smulkūs vertikalūs artefaktai)" msgid "Calibration Guide" msgstr "Kalibravimo vadovas" msgid "&Open G-code" msgstr "Atidaryti G-kodą" msgid "Open a G-code file" msgstr "Atidaryti G-kodo failą" msgid "Re&load from Disk" msgstr "Iš naujo įke<i iš disko" msgid "Reload the plater from disk" msgstr "Iš naujo įkelti plokštę (modelius) iš disko" msgid "Export &Toolpaths as OBJ" msgstr "Eksportuoti įrankių &trajektorijas kaip OBJ" msgid "Open &Slicer" msgstr "Atidaryti &pjaustyklę (Slicer)" msgid "Open Slicer" msgstr "Atidaryti pjaustyklę (Slicer)" msgid "&Quit" msgstr "Išeiti" #, c-format, boost-format msgid "Quit %s" msgstr "Išeiti iš %s" msgid "&File" msgstr "&Failas" msgid "&View" msgstr "&Vaizdas" msgid "&Help" msgstr "&Pagalba" #, c-format, boost-format msgid "A file exists with the same name: %s. Do you want to overwrite it?" msgstr "Failas tokiu pavadinimu jau egzistuoja: %s. Ar norite jį pakeisti?" #, c-format, boost-format msgid "A config exists with the same name: %s. Do you want to overwrite it?" msgstr "Konfigūracija tokiu pavadinimu jau egzistuoja: %s. Ar norite ją pakeisti?" msgid "Overwrite file" msgstr "Pakeisti (perrašyti) failą" msgid "Overwrite config" msgstr "Pakeisti (perrašyti) konfigūraciją" msgid "Yes to All" msgstr "Taip visiems" msgid "No to All" msgstr "Ne visiems" msgid "Choose a directory" msgstr "Pasirinkite aplanką (katalogą)" #, c-format, boost-format msgid "There is %d config exported. (Only non-system configs)" msgid_plural "There are %d configs exported. (Only non-system configs)" msgstr[0] "Eksportuotas %d profilis. (Tik nesisteminiai profiliai)" msgstr[1] "Eksportuoti %d profiliai. (Tik nesisteminiai profiliai)" msgstr[2] "Eksportuota %d profilių. (Tik nesisteminiai profiliai)" msgid "Export Result" msgstr "Eksportuoti rezultatą" msgid "Select profile to load:" msgstr "Pasirinkite įkeliamą profilį:" # AI Translated msgid "Config files (*.json;*.zip;*.orca_printer;*.orca_bundle;*.orca_filament)|*.json;*.zip;*.orca_printer;*.orca_bundle;*.orca_filament" msgstr "Konfigūracijos failai (*.json;*.zip;*.orca_printer;*.orca_bundle;*.orca_filament)|*.json;*.zip;*.orca_printer;*.orca_bundle;*.orca_filament" #, c-format, boost-format msgid "There is %d config imported. (Only non-system and compatible configs)" msgid_plural "There are %d configs imported. (Only non-system and compatible configs)" msgstr[0] "Importuotas %d profilis. (Tik nesisteminiai ir suderinami profiliai)" msgstr[1] "Importuoti %d profiliai. (Tik nesisteminiai ir suderinami profiliai)" msgstr[2] "Importuota %d profilių. (Tik nesisteminiai ir suderinami profiliai)" msgid "" "\n" "Hint: Make sure you have added the corresponding printer before importing the configs." msgstr "" "\n" "Patarimas: prieš importuodami profilius įsitikinkite, kad pridėjote atitinkamą spausdintuvą." msgid "Import result" msgstr "Importavimo rezultatas" msgid "File is missing" msgstr "Trūksta failo" msgid "The project is no longer available." msgstr "Projektas nebepasiekiamas." msgid "" "Do you want to synchronize your personal data from Orca Cloud?\n" "It contains the following information:\n" "1. The Process presets\n" "2. The Filament presets\n" "3. The Printer presets" msgstr "" "Ar norite sinchronizuoti savo asmeninius duomenis iš „Orca Cloud“?\n" "Juose yra ši informacija:\n" "1. Spausdinimo procesų profiliai\n" "2. Gijų profiliai\n" "3. Spausdintuvų profiliai" msgid "Synchronization" msgstr "Sinchronizacija" msgid "The device cannot handle more conversations. Please retry later." msgstr "Įrenginys negali apdoroti daugiau užklausų. Pabandykite vėliau." msgid "Player is malfunctioning. Please reinstall the system player." msgstr "Grotuvas neveikia tinkamai. Prašome iš naujo įdiegti sistemos grotuvą." msgid "The player is not loaded; please click the \"play\" button to retry." msgstr "Grotuvas neįkeltas. Spustelėkite \"paleisti\" mygtuką, kad bandytumėte iš naujo." msgid "The player is not loaded because the GStreamer GTK video sink is missing or failed to initialize." msgstr "Grotuvas neįkeltas, nes trūksta „GStreamer GTK“ vaizdo išvesties (video sink) arba nepavyko jos inicijuoti." msgid "Please confirm if the printer is connected." msgstr "Įsitikinkite (patikrinkite), ar spausdintuvas prijungtas." msgid "The printer is currently busy downloading. Please try again after it finishes." msgstr "Spausdintuvas šiuo metu siunčiasi duomenis. Pabandykite dar kartą, kai atsisiuntimas bus baigtas." msgid "Printer camera is malfunctioning." msgstr "Spausdintuvo kamera neveikia tinkamai." msgid "A problem occurred. Please update the printer firmware and try again." msgstr "Įvyko klaida. Atnaujinkite spausdintuvo programinę aparatinę įrangą (firmware) ir bandykite dar kartą." msgid "LAN Only Liveview is off. Please turn on the liveview on printer screen." msgstr "Tiesioginis vaizdas tik per LAN („LAN Only Liveview“) yra išjungtas. Įjunkite tiesioginį vaizdą spausdintuvo ekrane." msgid "Please enter the IP of the printer to connect." msgstr "Prašome įvesti norimo prijungti spausdintuvo IP adresą." msgid "Initializing..." msgstr "Inicializuojama..." msgid "Connection Failed. Please check the network and try again" msgstr "Nepavyko prisijungti. Patikrinkite tinklo ryšį ir bandykite dar kartą." msgid "Please check the network and try again. You can restart or update the printer if the issue persists." msgstr "Patikrinkite tinklo ryšį ir bandykite dar kartą. Jei problema išlieka, paleiskite iš naujo arba atnaujinkite spausdintuvą." msgid "The printer has been logged out and cannot connect." msgstr "Spausdintuvas yra atjungtas nuo paskyros ir negali prisijungti." msgid "Video Stopped." msgstr "Vaizdo įrašas sustabdytas." msgid "LAN Connection Failed (Failed to start liveview)" msgstr "Nepavyko prisijungti per LAN (Nepavyko paleisti tiesioginio vaizdo)" msgid "" "Virtual Camera Tools is required for this task!\n" "Do you want to install them?" msgstr "" "Šiai užduočiai atlikti reikalingi virtualios kameros įrankiai „Virtual Camera Tools“!\n" "Ar norite juos įdiegti?" msgid "Downloading Virtual Camera Tools" msgstr "Atsisiunčiami virtualios kameros įrankiai" msgid "" "Another virtual camera is running.\n" "Orca Slicer supports only a single virtual camera.\n" "Do you want to stop this virtual camera?" msgstr "" "Veikia kita virtuali kamera.\n" "„Orca Slicer“ palaiko tik vieną virtualią kamerą.\n" "Ar norite sustabdyti anksčiau paleistą virtualią kamerą?" #, c-format, boost-format msgid "Virtual camera initialize failed (%s)!" msgstr "Nepavyko inicijuoti virtualios kameros (%s)!" msgid "Network unreachable" msgstr "Tinklas nepasiekiamas" msgid "Information" msgstr "Informacija" msgid "Playing..." msgstr "Leidžiama..." msgid "Loading..." msgstr "Įkeliama..." msgid "Year" msgstr "Metai" msgid "Month" msgstr "Mėnuo" msgid "All Files" msgstr "Visi failai" msgid "Group files by year, recent first." msgstr "Grupuoti failus pagal metus, naujausi pirmiausia." msgid "Group files by month, recent first." msgstr "Grupuoti failus pagal mėnesį, naujausi pirmiausia." msgid "Show all files, recent first." msgstr "Rodyti visus failus, naujausius rodyti pirmiausia." msgid "Timelapse" msgstr "Intervalinis fotografavimas („Timelapse“)" msgid "Switch to timelapse files." msgstr "Perjungti į intervalinio fotografavimo („timelapse“) failus." msgid "Video" msgstr "Vaizdo įrašai (Video)" msgid "Switch to video files." msgstr "Perjungti į vaizdo įrašų failus." msgid "Switch to 3MF model files." msgstr "Perjungti į 3MF modelių failus." msgid "Delete selected files from printer." msgstr "Ištrinti pasirinktus failus iš spausdintuvo." msgid "Download" msgstr "Atsisiųsti" msgid "Download selected files from printer." msgstr "Atsisiųsti pasirinktus failus iš spausdintuvo." msgid "Batch manage files." msgstr "Masinis failų valdymas." msgid "Reload file list from printer." msgstr "Iš naujo iš spausdintuvo įkelti failų sąrašą." msgid "No printers." msgstr "Nėra spausdintuvų." msgid "Loading file list..." msgstr "Įkeliamas failų sąrašas..." msgid "No files" msgstr "Nėra failų" msgid "Load failed" msgstr "Įkėlimas nepavyko" msgid "Browsing file in storage is not supported in current firmware. Please update the printer firmware." msgstr "Failų naršymas atmintinėje nepalaikomas esamoje programinėje aparatinėje įrangoje. Atnaujinkite spausdintuvo programinę įrangą." msgid "LAN Connection Failed (Failed to view sdcard)" msgstr "Nepavyko prisijungti per LAN (Nepavyko pasiekti SD kortelės)" msgid "Browsing file in storage is not supported in LAN Only Mode." msgstr "Failų naršymas atmintinėje nėra palaikomas „Tik LAN“ režimu." #, c-format, boost-format msgid "You are going to delete %u file from printer. Are you sure to continue?" msgid_plural "You are going to delete %u files from printer. Are you sure to continue?" msgstr[0] "Ketinate ištrinti %u failą iš spausdintuvo. Ar norite tęsti?" msgstr[1] "Ketinate ištrinti %u failus iš spausdintuvo. Ar norite tęsti?" msgstr[2] "Ketinate ištrinti %u failų iš spausdintuvo. Ar norite tęsti?" msgid "Delete files" msgstr "Ištrinti failus" #, c-format, boost-format msgid "Do you want to delete the file '%s' from printer?" msgstr "Ar norite ištrinti failą \"%s\" iš spausdintuvo?" msgid "Delete file" msgstr "Ištrinti failą" msgid "Fetching model information..." msgstr "Gaunama modelio informacija..." msgid "Failed to fetch model information from printer." msgstr "Nepavyko iš spausdintuvo gauti modelio informacijos." msgid "Failed to parse model information." msgstr "Nepavyko apdoroti modelio informacijos." msgid "The .gcode.3mf file contains no G-code data. Please slice it with Orca Slicer and export a new .gcode.3mf file." msgstr "Failas „.gcode.3mf“ neturi G-kodo duomenų. Supjaustykite jį su „Orca Slicer“ ir eksportuokite naują „.gcode.3mf“ failą." #, c-format, boost-format msgid "File '%s' was lost! Please download it again." msgstr "Failas „%s“ nerastas! Atsisiųskite jį iš naujo." #, c-format, boost-format msgid "" "File: %s\n" "Title: %s\n" msgstr "" "Failas: %s\n" "Pavadinimas: %s\n" msgid "Download waiting..." msgstr "Laukiama atsisiuntimo..." msgid "Play" msgstr "Leisti" msgid "Open Folder" msgstr "Atidaryti aplanką" msgid "Download finished" msgstr "Atsisiuntimas baigtas" #, c-format, boost-format msgid "Downloading %d%%..." msgstr "Atsisiunčiama %d%%..." msgid "Air Condition" msgstr "Kameros vėdinimas / temperatūra" msgid "Reconnecting the printer, the operation cannot be completed immediately, please try again later." msgstr "Bandant prisijungti prie spausdintuvo, operacija negali būti atlikta iš karto. Pabandykite dar kartą vėliau." msgid "Timeout, please try again." msgstr "Baigėsi laukimo laikas, prašome bandyti vėliau." msgid "File does not exist." msgstr "Failas neegzistuoja." msgid "File checksum error. Please retry." msgstr "Failo kontrolinės sumos klaida. Prašome pakartoti." msgid "Not supported on the current printer version." msgstr "Nepalaikoma dabartinio spausdintuvo versijos." msgid "" "Please check if the storage is inserted into the printer.\n" "If it still cannot be read, you can try formatting the storage." msgstr "" "Patikrinkite, ar į spausdintuvą įdėta laikmena.\n" "Jei ji vis tiek nuskaitoma, galite pabandyti laikmeną suformatuoti." msgid "The firmware version of the printer is too low. Please update the firmware and try again." msgstr "Spausdintuvo aparatinės programinės įrangos (firmware) versija yra per sena. Atnaujinkite aparatinę programinę įrangą ir bandykite dar kartą." msgid "The file already exists, do you want to replace it?" msgstr "Failas jau egzistuoja, ar norite jį pakeisti?" msgid "Insufficient storage space, please clear the space and try again." msgstr "Nepakanka vietos laikmenoje, atlaisvinkite vietos ir bandykite dar kartą." msgid "File creation failed, please try again." msgstr "Nepavyko sukurti failo, bandykite dar kartą." msgid "File write failed, please try again." msgstr "Nepavyko įrašyti failo, bandykite dar kartą." msgid "MD5 verification failed, please try again." msgstr "MD5 patikra nepavyko, bandykite dar kartą." msgid "File renaming failed, please try again." msgstr "Nepavyko pervadinti failo, bandykite dar kartą." msgid "File upload failed, please try again." msgstr "Nepavyko įkelti failo, bandykite dar kartą." #, c-format, boost-format msgid "Error code: %d" msgstr "Klaidos kodas: %d" msgid "User cancels task." msgstr "Naudotojas atšaukė užduotį." msgid "Failed to read file, please try again." msgstr "Nepavyko nuskaityti failo, bandykite dar kartą." msgid "Speed:" msgstr "Greitis:" msgid "Deadzone:" msgstr "Akla zona:" msgid "Options:" msgstr "Pasirinkimai:" msgid "Zoom" msgstr "Padidinti" msgid "Translation/Zoom" msgstr "Postūmis / Mastelio keitimas" msgid "3Dconnexion settings" msgstr "3Dconnexion nustatymai" msgid "Swap Y/Z axes" msgstr "Sukeisti Y/Z ašis" msgid "Invert X axis" msgstr "Apsukti X ašį" msgid "Invert Y axis" msgstr "Apsukti Y ašį" msgid "Invert Z axis" msgstr "Apsukti Z ašį" msgid "Invert Yaw axis" msgstr "Apgręžti posūkio ašį (Yaw)" msgid "Invert Pitch axis" msgstr "Apgręžti tangažo ašį (Pitch)" msgid "Invert Roll axis" msgstr "Apgręžti posvyrio ašį (Roll)" msgid "(LAN)" msgstr "(LAN)" msgid "Search" msgstr "Paieška" msgid "My Device" msgstr "Mano įrenginys" msgid "Other Device" msgstr "Kitas įrenginys" msgid "Online" msgstr "Pasiekiamas" msgid "Input access code" msgstr "Įvesti prieigos kodą" msgid "Can't find devices?" msgstr "Nepavyksta rasti įrenginių?" msgid "Log out successful." msgstr "Atsijungimas sėkmingas." msgid "Offline" msgstr "Neprisijungus" msgid "Busy" msgstr "Užimtas" msgid "Modifying the device name" msgstr "Keičiamas įrenginio pavadinimas" msgid "Name is invalid;" msgstr "Pavadinimas netinkamas;" msgid "illegal characters:" msgstr "Neleistini simboliai:" msgid "illegal suffix:" msgstr "Neleistinas plėtinys:" msgid "The name field is not allowed to be empty." msgstr "Pavadinimas negali būti tuščias." msgid "The name is not allowed to start with a space." msgstr "Pavadinimas negali prasidėti tarpu." msgid "The name is not allowed to end with a space." msgstr "Pavadinimas negali baigtis tarpu." msgid "The name is not allowed to exceed 32 characters." msgstr "Pavadinimas negali viršyti 32 simbolių." msgid "Bind with Pin Code" msgstr "Susieti su PIN kodu" msgid "Bind with Access Code" msgstr "Susieti su prieigos kodu" msgctxt "Quit_Switching" msgid "Quit" msgstr "Išeiti" msgid "Switching..." msgstr "Perjungiama..." msgid "Switching failed" msgstr "Nepavyko perjungti" msgid "Printing progress" msgstr "Spausdinimo eiga" msgid "Parts Skip" msgstr "Dalių praleidimas" msgid "Stop" msgstr "Sustabdyti" msgid "Layer: N/A" msgstr "Sluoksnis: N/A" msgid "Click to view thermal preconditioning explanation" msgstr "Spustelėkite, kad peržiūrėtumėte terminio paruošimo paaiškinimą" msgid "Clear" msgstr "Išvalyti" msgid "" "You have completed printing the mall model, \n" "but synchronizing rating information has failed." msgstr "" "Baigėte spausdinti modelį iš galerijos, \n" "tačiau įvertinimo informacijos sinchronizavimas nepavyko." msgid "How do you like this printing file?" msgstr "Kaip jums patiko šis spausdinimo failas?" msgid "(The model has already been rated. Your rating will overwrite the previous rating.)" msgstr "(Modelis jau buvo įvertintas. Jūsų įvertinimas perrašys ankstesnį įvertinimą.)" msgid "Rate" msgstr "Įvertinti" msgid "Camera" msgstr "Kamera" msgid "Storage" msgstr "Laikmena" msgid "Camera Setting" msgstr "Kameros nustatymai" msgid "Switch Camera View" msgstr "Perjungti kameros vaizdą" msgid "Control" msgstr "Valdymas" msgid "Printer Parts" msgstr "Spausdintuvo dalys" msgid "Print Options" msgstr "Spausdinimo parametrai" msgid "Safety Options" msgstr "Saugos nustatymai" # AI Translated msgid "Hotends" msgstr "Kaitinimo blokai" msgid "Lamp" msgstr "Apšvietimas" msgid "Bed" msgstr "Pagrindas" msgid "Debug Info" msgstr "Derinimo informacija" msgid "Filament loading..." msgstr "Įveriamas plastikas..." msgid "No Storage" msgstr "Nėra laikmenos" msgid "Storage Abnormal" msgstr "Laikmenos klaida" msgid "Cancel print" msgstr "Atšaukti spausdinimą" msgid "Are you sure you want to stop this print?" msgstr "Ar tikrai norite sustabdyti šį spausdinimą?" msgid "The printer is busy with another print job." msgstr "Spausdintuvas užimtas kitu spausdinimo darbu." msgid "When printing is paused, filament loading and unloading are only supported for external slots." msgstr "Kai spausdinimas pristabdytas, gijos įvėrimas ir išvėrimas palaikomas tik išorinėse lizduose." msgid "Current extruder is busy changing filament." msgstr "Šiuo metu ekstruderis keičia giją." # AI Translated msgid "\"Load\" or \"Unload\" is not supported for external spool while using Filament Track Switch." msgstr "„Įkelti“ arba „Iškelti“ nepalaikoma išorinei ritei naudojant Filament Track Switch." # AI Translated msgid "The Filament Track Switch has not been setup. Please setup on printer." msgstr "Filament Track Switch nebuvo nustatytas. Nustatykite jį spausdintuve." msgid "Current slot has already been loaded." msgstr "Į šį lizdą gija jau įverta." msgid "The selected slot is empty." msgstr "Pasirinktas lizdas yra tuščias." msgid "Printer 2D mode does not support 3D calibration" msgstr "Spausdintuvo 2D režimas nepalaiko 3D kalibravimo" msgid "Downloading..." msgstr "Atsisiunčiama..." msgid "Cloud Slicing..." msgstr "Sluoksniavimas debesyje..." #, c-format, boost-format msgid "In Cloud Slicing Queue, there are %s tasks ahead of you." msgstr "Debesies sluoksniavimo eilėje priekyje yra %s užduotys (-ių)." #, c-format, boost-format msgid "Layer: %s" msgstr "Sluoksnis: %s" #, c-format, boost-format msgid "Layer: %d/%d" msgstr "Sluoksnis: %d/%d" msgid "Please heat the nozzle to above 170℃ before loading or unloading filament." msgstr "Prieš įverdami arba išverdami giją, įkaitinkite purkštuką virš 170°C." msgid "Chamber temperature cannot be changed in cooling mode while printing." msgstr "Spausdinimo metu vėsinimo režimu negalima keisti kameros temperatūros." msgid "If the chamber temperature exceeds 40℃, the system will automatically switch to heating mode. Please confirm whether to switch." msgstr "Jei kameros temperatūra viršys 40°C, sistema automatiškai persijungs į šildymo režimą. Patvirtinkite, ar norite perjungti." msgid "Please select an AMS slot before calibration" msgstr "Prieš kalibruodami pasirinkite AMS lizdą" msgid "Cannot read filament info: the filament is loaded to the tool head. Please unload the filament and try again." msgstr "Nepavyko nuskaityti gijos informacijos: gija yra paduota į spausdinimo galvutę. Išverkite giją ir bandykite dar kartą." msgid "This only takes effect during printing" msgstr "Tai turi įtakos tik spausdinimo metu" msgid "Silent" msgstr "Tylus" msgid "Sport" msgstr "Sportinis" msgid "Ludicrous" msgstr "Ekstremalus" msgid "Turning off the lights during the task will cause the failure of AI monitoring, like spaghetti detection. Please choose carefully." msgstr "Išjungus apšvietimą užduoties metu, nustos veikti dirbtinio intelekto (AI) stebėsena, pavyzdžiui, susivėlusios gijos („spaghetti“) aptikimas. Pasirinkite atsakingai." msgid "Keep it On" msgstr "Palikti įjungtą" msgid "Turn it Off" msgstr "Išjungti" msgid "Can't start this without storage." msgstr "Negalima paleisti be laikmenos." msgid "Rate the Print Profile" msgstr "Įvertinkite spausdinimo profilį" msgid "Comment" msgstr "Komentaras" msgid "Rate this print" msgstr "Įvertinkite šį spausdinį" msgid "Add Photo" msgstr "Įtraukti nuotrauką" msgid "Delete Photo" msgstr "Ištrinti nuotrauką" # AI Translated msgid "Select Images" msgstr "Pasirinkti paveikslėlius" # AI Translated msgid "Image files (*.png;*.jpg;*jpeg)|*.png;*.jpg;*.jpeg" msgstr "Paveikslėlių failai (*.png;*.jpg;*jpeg)|*.png;*.jpg;*.jpeg" msgid "Submit" msgstr "Pateikti" msgid "Please click on the star first." msgstr "Pirmiausia paspauskite žvaigždutę." msgid "Get oss config failed." msgstr "Nepavyko gauti OSS konfigūracijos." msgid "Upload Pictures" msgstr "Įkelti paveikslėlius" msgid "Number of images successfully uploaded" msgstr "Sėkmingai įkeltų vaizdų skaičius" msgid " upload failed" msgstr " įkėlimas nepavyko" msgid " upload config prase failed\n" msgstr " nepavyko apdoroti įkėlimo konfigūracijos\n" msgid " No corresponding storage bucket\n" msgstr " Nėra atitinkamos saugyklos talpyklos\n" msgid " cannot be opened\n" msgstr " nepavyko atidaryti\n" msgid "" "The following issues occurred during the process of uploading images. Do you want to ignore them?\n" "\n" msgstr "" "Įkeliant vaizdus kilo šios problemos. Ar norite jas ignoruoti?\n" "\n" msgid "info" msgstr "Informacija" msgid "Synchronizing the printing results. Please retry a few seconds later." msgstr "Sinchronizuojami spausdinimo rezultatai. Pabandykite dar kartą po kelių akimirkų." msgid "Upload failed\n" msgstr "Įkėlimas nepavyko\n" msgid "Obtaining instance_id failed\n" msgstr "Nepavyko gauti „instance_id“\n" msgid "" "Your comment result cannot be uploaded due to the following reasons:\n" "\n" " error code: " msgstr "" "Nepavyko įkelti jūsų komentaro dėl šių priežasčių:\n" "\n" " klaidos kodas: " msgid "error message: " msgstr "klaidos pranešimas: " msgid "" "\n" "\n" "Would you like to redirect to the webpage to give a rating?" msgstr "" "\n" "\n" "Norite būti nukreipti į puslapį, kuriame galima įvertinti?" msgid "Some of your images failed to upload. Would you like to redirect to the webpage to give a rating?" msgstr "Nepavyko įkelti kai kurių jūsų vaizdų. Norite būti nukreipti į puslapį, kuriame galite įvertinti?" msgid "You can select up to 16 images." msgstr "Galite pasirinkti iki 16 vaizdų." msgid "" "At least one successful print record of this print profile is required \n" "to give a positive rating (4 or 5 stars)." msgstr "" "Norint palikti teigiamą įvertinimą (4 arba 5 žvaigždutės), būtinas \n" "bent vienas sėkmingas spausdinimo rezultatas su šiuo spausdinimo profiliu." msgid "click to add machine" msgstr "spustelėkite, kad pridėtumėte įrenginį" msgid "Status" msgstr "Būsena" msgctxt "Firmware" msgid "Update" msgstr "Atnaujinti" msgid "Assistant(HMS)" msgstr "Asistentas (HMS)" #, c-format, boost-format msgid "Network plug-in v%s" msgstr "Tinklo papildinys v%s" #, c-format, boost-format msgid "Network plug-in v%s (%s)" msgstr "Tinklo papildinys v%s (%s)" msgid "Don't show again" msgstr "Daugiau nerodyti" msgid "Go to" msgstr "Eiti į" msgid "Later" msgstr "Vėliau" #, c-format, boost-format msgid "%s error" msgstr "%s klaida" #, c-format, boost-format msgid "%s has encountered an error" msgstr "%s įvyko klaida" #, c-format, boost-format msgid "%s warning" msgstr "%s įspėjimas" #, c-format, boost-format msgid "%s has a warning" msgstr "%s turi įspėjimą" #, c-format, boost-format msgid "%s info" msgstr "%s info" #, c-format, boost-format msgid "%s information" msgstr "%s informacija" msgid "Skip" msgstr "Praleisti" msgid "Newer 3MF version" msgstr "Naujesnė 3MF versija" msgid "The 3MF file version is in Beta and it is newer than the current OrcaSlicer version." msgstr "3MF failo versija yra „Beta“ stadijos ir yra naujesnė už dabartinę „OrcaSlicer“ versiją." msgid "If you would like to try Orca Slicer Beta, you may click to" msgstr "Jei norite išbandyti „OrcaSlicer Beta“, spustelėkite" msgid "Download Beta Version" msgstr "Atsisiųsti Beta versiją" msgid "The 3MF file version is newer than the current OrcaSlicer version." msgstr "3MF failo versija yra naujesnė už dabartinę „OrcaSlicer“ versiją." msgid "Updating your OrcaSlicer could enable all functionality in the 3MF file." msgstr "Atnaujinę „OrcaSlicer“, galėsite naudotis visomis 3MF failo funkcijomis." msgid "Current Version: " msgstr "Dabartinė versija: " msgid "Latest Version: " msgstr "Naujausia versija: " msgctxt "Software" msgid "Update" msgstr "Atnaujinti" msgid "Not for now" msgstr "Dabar ne" msgid "Server Exception" msgstr "Serverio išimtinė klaida" msgid "The server is unable to respond. Please click the link below to check the server status." msgstr "Serveris negali atsakyti. Norėdami patikrinti serverio būseną, spustelėkite toliau pateiktą nuorodą." msgid "If the server is in a fault state, you can temporarily use offline printing or local network printing." msgstr "Jei sutriko serverio veikimas, galite laikinai naudoti spausdinimą neprisijungus arba spausdinimą vietiniame tinkle (LAN)." msgid "How to use LAN only mode" msgstr "Kaip naudoti tik LAN režimą" msgid "Don't show this dialog again" msgstr "Daugiau nerodyti šio dialogo lango" msgid "Please refer to Wiki before use->" msgstr "Prieš naudodami peržiūrėkite „Wiki“ ->" msgid "3D Mouse disconnected." msgstr "3D pelė atjungta." msgid "A new configuration is available. Update now?" msgstr "Yra nauja konfigūracija. Ar atnaujinti dabar?" msgid "Integration was successful." msgstr "Integracija sėkminga." msgid "Integration failed." msgstr "Integracija nepavyko." msgid "Undo integration was successful." msgstr "Integracijos atšaukimas sėkmingas." msgid "New network plug-in available." msgstr "Galimas naujas tinklo papildinys." msgid "Details" msgstr "Išsamiau" msgid "New printer config available." msgstr "Pasiekiama nauja spausdintuvo konfigūracija." msgid "Undo integration failed." msgstr "Integracijos atšaukimas nepavyko." msgid "Exporting" msgstr "Eksportuojama." msgid "An update is available!" msgstr "Galimas naujinimas!" msgid "Go to download page" msgstr "Eiti į atsisiuntimo puslapį." msgid "Open Folder." msgstr "Atidaryti aplanką." msgid "Safely remove hardware." msgstr "Saugiai išimti laikmeną." #, c-format, boost-format msgid "%1$d Object has custom supports." msgid_plural "%1$d Objects have custom supports." msgstr[0] "%1$d objektas turi pasirinktines atramas." msgstr[1] "%1$d objektai turi pasirinktines atramas." msgstr[2] "%1$d objektų turi pasirinktines atramas." #, c-format, boost-format msgid "%1$d Object has color painting." msgid_plural "%1$d Objects have color painting." msgstr[0] "%1$d objektas turi nudažytų spalvų." msgstr[1] "%1$d objektai turi nudažytų spalvų." msgstr[2] "%1$d objektų turi nudažytų spalvų." #, c-format, boost-format msgid "%1$d object was loaded as a part of cut object." msgid_plural "%1$d objects were loaded as parts of cut object." msgstr[0] "%1$d objektas įkeltas kaip perpjauto objekto dalis." msgstr[1] "%1$d objektai įkelti kaip perpjauto objekto dalys." msgstr[2] "%1$d objektų įkelta kaip perpjauto objekto dalys." #, c-format, boost-format msgid "%1$d object was loaded with fuzzy skin painting." msgid_plural "%1$d objects were loaded with fuzzy skin painting." msgstr[0] "%1$d objektas įkeltas su parinkta grublėto paviršiaus („fuzzy skin“) sritimi." msgstr[1] "%1$d objektai įkelti su parinktomis grublėto paviršiaus („fuzzy skin“) sritimis." msgstr[2] "%1$d objektų įkelta su parinktomis grublėto paviršiaus („fuzzy skin“) sritimis." msgid "ERROR" msgstr "KLAIDA" msgid "COMPLETED" msgstr "UŽBAIGTA" msgid "CANCELED" msgstr "ATŠAUKTA" msgid "Cancel upload" msgstr "Atšaukti įkėlimą" msgid "Jump to" msgstr "Peršokti į" msgid "Error:" msgstr "Klaida:" msgid "Warning:" msgstr "Įspėjimas:" msgid "Exported successfully" msgstr "Sėkmingai eksportuota" msgid "Model file downloaded." msgstr "Modelio failas atsisiųstas." msgid "Pull" msgstr "Atsisiųsti" msgid "Force push" msgstr "Priverstinai įkelti" msgid "Shared profiles may be available for this printer." msgstr "Šiam spausdintuvui gali būti prieinami bendri profiliai." msgid "Browse shared profiles" msgstr "Naršyti bendrinamus profilius" msgid "Serious warning:" msgstr "Rimtas įspėjimas:" msgid " (Repair)" msgstr " (Taisyti)" msgid " Click here to install it." msgstr " Spustelėkite čia, kad įdiegtumėte." msgid "WARNING:" msgstr "ĮSPĖJIMAS:" msgid "Your model needs support! Please enable support material." msgstr "Jūsų modeliui reikalingos atramos! Įjunkite atraminę medžiagą." msgid "G-code path overlap" msgstr "G-kodo trajektorijų persidengimas" msgid "Cut connectors" msgstr "Pjūvio kaiščiai" msgid "Layers" msgstr "Sluoksniai" msgid "The application cannot run normally because OpenGL version is lower than 3.2.\n" msgstr "" "Programa negali tinkamai veikti, nes „OpenGL“ versija yra senesnė nei 3.2.\n" "\n" msgid "Please upgrade your graphics card driver." msgstr "Atnaujinkite vaizdo plokštės tvarkyklę." msgid "Unsupported OpenGL version" msgstr "Nepalaikoma OpenGL versija" #, c-format, boost-format msgid "" "Unable to load shaders:\n" "%s" msgstr "" "Nepavyko įkelti šeiderių:\n" "%s" msgid "Error loading shaders" msgstr "Klaida įkeliant šeiderius" msgctxt "Layers" msgid "Top" msgstr "Viršutinis" msgctxt "Layers" msgid "Bottom" msgstr "Apatinis" # AI Translated msgid "Plugin Selection" msgstr "Papildinio pasirinkimas" # AI Translated msgid "" "No plugins capabilities available for this type.\n" "Enable or install some to use." msgstr "" "Šiam tipui nėra prieinamų papildinių galimybių.\n" "Įjunkite arba įdiekite jų, kad galėtumėte naudoti." # AI Translated msgid "There is stringing-prone filament in the current print job. Enabling nozzle clumping detection now may degrade print quality. Are you sure you want to enable it?" msgstr "Dabartinėje spausdinimo užduotyje yra prie siūlų linkusios gijos. Įjungus purkštuko apsivėlimo aptikimą dabar gali suprastėti spausdinimo kokybė. Ar tikrai norite jį įjungti?" # AI Translated msgid "Enable Nozzle Clumping Detection" msgstr "Įjungti purkštuko apsivėlimo aptikimą" # AI Translated msgid "When enabled, the printer will automatically capture photos of printed parts and upload them to the cloud. Would you like to enable this option?" msgstr "Kai įjungta, spausdintuvas automatiškai fotografuos spausdintas dalis ir įkels jas į debesį. Ar norite įjungti šią parinktį?" # AI Translated msgid "Confirm Enable Print Status Snapshot" msgstr "Patvirtinti spausdinimo būsenos momentinės nuotraukos įjungimą" msgid "Enable detection of build plate position" msgstr "Įjungti spausdinimo pagrindo pozicijos atpažinimą" msgid "The localization tag of the build plate will be detected, and printing will be paused if the tag is not in predefined range." msgstr "Spausdinimo pagrindo lokalizavimo žymė įjungta. Spausdinimas bus pristabdytas, jei žymė išeis už nustatytų ribų." msgid "Build Plate Detection" msgstr "Spausdinimo pagrindo aptikimas" msgid "Identifies the type and position of the build plate on the heatbed. Pausing printing if a mismatch is detected." msgstr "Atpažįsta spausdinimo pagrindo tipą ir padėtį ant kaitinamo pagrindo. Aptikus neatitikimą, spausdinimas pristabdomas." # AI Translated msgid "Purifies the chamber air as the print finishes, based on the selected mode." msgstr "Valo kameros orą užbaigus spausdinimą pagal pasirinktą režimą." # AI Translated msgid "Purifies the chamber air through internal circulation as each print finishes." msgstr "Valo kameros orą vidine cirkuliacija kiekvieną kartą baigus spausdinimą." # AI Translated msgid "Automatically match the corresponding switch strategy for leak-prone filaments (disable blob detection) and regular filaments (enable blob detection)." msgstr "Automatiškai parenka atitinkamą perjungimo strategiją nutekėjimui linkusioms gijoms (išjungiamas gumulų aptikimas) ir įprastoms gijoms (įjungiamas gumulų aptikimas)." # AI Translated msgid "Detect whether the nozzle is wrapped by filament or other foreign matter." msgstr "Aptikti, ar purkštukas apvyniotas gija arba kita pašaline medžiaga." # AI Translated msgid "After disabling, nozzle wrapping cannot be detected, which may lead to print failure or nozzle damage." msgstr "Išjungus purkštuko apsivėlimo aptikti nebus galima, o tai gali lemti spausdinimo nesėkmę arba purkštuko pažeidimą." msgid "AI Detections" msgstr "DI aptikimai" msgid "Printer will send assistant message or pause printing if any of the following problem is detected." msgstr "Spausdintuvas atsiųs asistento pranešimą arba pristabdys spausdinimą, jei bus aptikta kuri nors iš šių problemų." msgid "Enable AI monitoring of printing" msgstr "Įjungti DI spausdinimo stebėjimą" msgid "Pausing Sensitivity:" msgstr "Pristabdymo jautrumas:" msgid "Spaghetti Detection" msgstr "„Spageti“ (susivėlimo) aptikimas" msgid "Detect spaghetti failures (scattered lose filament)." msgstr "Aptikti spausdinimo nesėkmes, kai gija susivelia (išsisklaido laisva gija)." msgid "Purge Chute Pile-Up Detection" msgstr "Atliekų šachtos užsikimšimo aptikimas" msgid "Monitor if the waste is piled up in the purge chute." msgstr "Stebėti, ar atliekų šachtoje nesusikaupė gijos atliekų krūva." msgid "Nozzle Clumping Detection" msgstr "Gijos sankaupų ant purkštuko aptikimas" msgid "Check if the nozzle is clumping by filaments or other foreign objects." msgstr "Tikrinti, ar aplink purkštuką nesikaupia gijos gniutulai ar kiti pašaliniai objektai." msgid "Detects air printing caused by nozzle clogging or filament grinding." msgstr "Aptinka „tuščią spausdinimą“, sukeltą purkštuko užsikimšimo arba gijos prasisukimo (gremžimo) tiektuve." msgid "First Layer Inspection" msgstr "Pirmojo sluoksnio apžiūra" msgid "Auto-recover from step loss" msgstr "Atstatymas po žingsnių praleidimo" msgid "Store Sent Files on External Storage" msgstr "Išsaugoti išsiųstus failus išorinėje laikmenoje" # AI Translated msgid "Save the printing files sent from the slicer and other apps on External Storage" msgstr "Išsaugoti spausdinimo failus, siunčiamus iš pjaustyklės ir kitų programų, išorinėje laikmenoje" msgid "Allow Prompt Sound" msgstr "Leisti garsus" msgid "Filament Tangle Detection" msgstr "Gijos susipainiojimo aptikimas" msgid "Check if the nozzle is clumping by filament or other foreign objects." msgstr "Tikrinti, ar aplink purkštuką nesikaupia gijos gniutulai ar kiti pašaliniai objektai." # AI Translated msgid "Purify Air at Print End" msgstr "Valyti orą spausdinimo pabaigoje" # AI Translated msgid "Internal Circulation" msgstr "Vidinė cirkuliacija" # AI Translated msgid "Alignment Detection" msgstr "Sulygiavimo aptikimas" # AI Translated msgid "Pauses printing when build plate misalignment is detected." msgstr "Pristabdo spausdinimą aptikus pagrindo neatitikimą." # AI Translated msgid "Foreign Object Detection" msgstr "Pašalinių objektų aptikimas" # AI Translated msgid "Checks for any objects on the build plate at the start of a print to avoid collisions." msgstr "Spausdinimo pradžioje patikrina, ar ant pagrindo nėra jokių objektų, kad būtų išvengta susidūrimų." # AI Translated msgid "Printed Part Displacement Detection" msgstr "Spausdintos dalies poslinkio aptikimas" # AI Translated msgid "Monitors the printed part during printing and alerts immediately if it shifts or collapses." msgstr "Stebi spausdinamą dalį spausdinimo metu ir nedelsdamas įspėja, jei ji pasislenka arba sugriūva." # AI Translated msgid "Checks if the nozzle is clumping by filament or other foreign objects." msgstr "Patikrina, ar purkštukas neapsivėlęs gija arba kitais pašaliniais objektais." msgid "On" msgstr "Įjungta" msgid "Open Door Detection" msgstr "Atidarytų durelių aptikimas" msgid "Notification" msgstr "Pranešimas" msgid "Pause printing" msgstr "Pristabdyti spausdinimą" # AI Translated msgid "Print Status Snapshot" msgstr "Spausdinimo būsenos momentinė nuotrauka" # AI Translated msgid "Automatically capture and upload print photos, showing defects during printing and the final result for remote viewing." msgstr "Automatiškai fotografuoja ir įkelia spausdinimo nuotraukas, rodančias defektus spausdinimo metu ir galutinį rezultatą nuotoliniam peržiūrėjimui." msgctxt "Nozzle Type" msgid "Type" msgstr "Tipas" msgctxt "Nozzle Diameter" msgid "Diameter" msgstr "Skersmuo" msgctxt "Nozzle Flow" msgid "Flow" msgstr "Srautas" msgid "Please change the nozzle settings on the printer." msgstr "Pakeiskite purkštuko nustatymus spausdintuve." msgid "Brass" msgstr "Žalvaris" msgid "High flow" msgstr "Didelio srauto (High flow)" # AI Translated msgid "TPU High flow" msgstr "TPU High flow" msgid "No wiki link available for this printer." msgstr "Šiam spausdintuvui nėra „wiki“ nuorodos." msgid "Unavailable while heating maintenance function is on." msgstr "Neprieinama, kol įjungta kaitinimo palaikymo funkcija." msgid "Idle Heating Protection" msgstr "Apsauga nuo kaitinimo prastovos metu" msgid "Stops heating automatically after 5 mins of idle to ensure safety." msgstr "Saugumui užtikrinti kaitinimas automatiškai sustabdomas po 5 minučių prastovos." msgid "Global" msgstr "Bendras" msgid "Objects" msgstr "Objektai" msgid "Cycle settings visibility" msgstr "Ciklo nustatymų matomumas" msgid "Compare presets" msgstr "Palyginti profilius" msgid "View all object's settings" msgstr "Matyti visus objekto nustatymus" msgid "Material settings" msgstr "Medžiagos nustatymai" msgid "Remove current plate (if not last one)" msgstr "Pašalinti dabartinę plokštę (jei ji ne paskutinė)" msgid "Auto orient objects on current plate" msgstr "Automatiškai suorientuoti objektus dabartinėje plokštėje" msgid "Arrange objects on current plate" msgstr "Išdėstyti objektus dabartinėje plokštėje" msgid "Unlock current plate" msgstr "Atrakinti dabartinę plokštę" msgid "Lock current plate" msgstr "Užrakinti dabartinę plokštę" msgid "Filament grouping" msgstr "Gijų grupavimas" msgid "Edit current plate name" msgstr "Taisyti dabartinės plokštės pavadinimą" msgid "Move plate to the front" msgstr "Perkelti plokštę į priekį" msgid "Customize current plate" msgstr "Individualizuoti esamą plokštę" #, c-format, boost-format msgid "The %s nozzle can not print %s." msgstr "%s purkštukas negali spausdinti %s." #, boost-format msgid "Mixing %1% with %2% in printing is not recommended.\n" msgstr "" "Spausdinant nerekomenduojama maišyti %1% su %2%.\n" "\n" msgid " nozzle" msgstr " purkštukas" #, boost-format msgid "It is not recommended to print the following filament(s) with %1%: %2%\n" msgstr "" "Su %1% nerekomenduojama spausdinti šių gijų: %2%\n" "\n" msgid "It is not recommended to use the following nozzle and filament combinations:\n" msgstr "" "Nerekomenduojama naudoti šių purkštuko ir gijos derinių:\n" "\n" #, boost-format msgid "%1% with %2%\n" msgstr "" "%1% su %2%\n" "\n" #, boost-format msgid " plate %1%:" msgstr " plokštė %1%:" msgid "Invalid name, the following characters are not allowed:" msgstr "Netinkamas pavadinimas. Neleidžiami simboliai:" msgid "Sliced Info" msgstr "Sluoksniavimo informacija" msgid "Used Filament (m)" msgstr "Naudota gija (m)" msgid "Used Filament (mm³)" msgstr "Naudota gija (mm³)" msgid "Used Filament (g)" msgstr "Naudota gija (g)" msgid "Used Materials" msgstr "Sunaudota medžiagų" msgid "Estimated time" msgstr "Numatomas laikas" msgid "Set the number of AMS installed on the nozzle." msgstr "Nustatykite purkštukui įdiegtų AMS skaičių." msgid "AMS(4 slots)" msgstr "AMS (4 lizdai)" msgid "AMS(1 slot)" msgstr "AMS (1 lizdas)" msgid "Not installed" msgstr "Neįdiegta" msgid "The software does not support using different diameter of nozzles for one print. If the left and right nozzles are inconsistent, we can only proceed with single-head printing. Please confirm which nozzle you would like to use for this project." msgstr "Programinė įranga nepalaiko skirtingo skersmens purkštukų naudojimo vienam spausdinimui. Jei kairysis ir dešinysis purkštukai skiriasi, galima spausdinti tik su viena galvute. Patvirtinkite, kurį purkštuką norite naudoti šiam projektui." msgid "Switch diameter" msgstr "Pakeisti skersmenį" msgid "Configuration incompatible" msgstr "Nesuderinama konfigūracija" # AI Translated msgid "Filament switcher detected. All AMS filaments are now available for both extruders. The slicer will auto-assign for optimal printing." msgstr "Aptiktas gijos perjungiklis. Visos AMS gijos dabar prieinamos abiem ekstruderiams. Pjaustyklė automatiškai priskirs optimaliam spausdinimui." # AI Translated msgid "A filament switcher is detected but not calibrated and thus currently unavailable. Please calibrate it on the printer and synchronize before use." msgstr "Aptiktas gijos perjungiklis, tačiau jis nesukalibruotas, todėl šiuo metu neprieinamas. Sukalibruokite jį spausdintuve ir sinchronizuokite prieš naudojimą." msgid "Tips" msgstr "Patarimai" msgid "Sync printer information" msgstr "Sinchronizuoti spausdintuvo informaciją" msgid "" "The currently selected machine preset is inconsistent with the connected printer type.\n" "Are you sure to continue syncing?" msgstr "" "Šiuo metu pasirinktas įrenginio profilis neatitinka prijungto spausdintuvo tipo.\n" "Ar tikrai norite tęsti sinchronizavimą?" msgid "There are unset nozzle types. Please set the nozzle types of all extruders before synchronizing." msgstr "Yra nenustatytų purkštukų tipų. Prieš sinchronizuodami nustatykite visų ekstruderių purkštukų tipus." msgid "Sync extruder infomation" msgstr "Sinchronizuoti ekstruderio informaciją" msgid "Connection" msgstr "Ryšys" msgid "Synchronize nozzle information and the number of AMS" msgstr "Sinchronizuoti purkštuko informaciją ir AMS skaičių" msgid "Click to edit preset" msgstr "Spustelėkite, norėdami redaguoti profilį" msgid "Nozzle" msgstr "Purkštukas" msgid "Project Filaments" msgstr "Projekto gijos" # AI Translated msgid "Purge mode" msgstr "Pravalymo režimas" msgid "Flushing volumes" msgstr "Valymo tūriai" msgid "Add one filament" msgstr "Pridėti vieną giją" msgid "Remove last filament" msgstr "Pašalinti paskutinę giją" msgid "Synchronize filament list from AMS" msgstr "Sinchronizuoti gijų sąrašą iš AMS" msgid "Set filaments to use" msgstr "Nustatyti gijas naudojimui" msgid "Search plate, object and part." msgstr "Plokštės, objekto ir dalies paieška." msgid "Pellets" msgstr "Granulės" #, c-format, boost-format msgid "After completing your operation, %s project will be closed and create a new project." msgstr "Baigus šią operaciją, projektas „%s“ bus uždarytas ir bus sukurtas naujas projektas." msgid "There are no compatible filaments, and sync is not performed." msgstr "Čia nėra suderinamų gijų, sinchronizacija nebuvo atlikta." msgid "Sync filaments with AMS" msgstr "Sinchronizuoti gijas su AMS" msgid "" "There are some unknown or incompatible filaments mapped to generic preset.\n" "Please update Orca Slicer or restart Orca Slicer to check if there is an update to system presets." msgstr "" "Yra keletas nežinomų arba nesuderinamų gijų, priskirtų bendrajam profiliui.\n" "Atnaujinkite „OrcaSlicer“ arba paleiskite programą iš naujo, kad patikrintumėte, ar yra sistemos profilių atnaujinimų." msgid "Only filament color information has been synchronized from printer." msgstr "Iš spausdintuvo buvo sinchronizuota tik gijos spalvos informacija." msgid "Filament type and color information have been synchronized, but slot information is not included." msgstr "Gijos tipo ir spalvos informacija buvo sinchronizuota, tačiau lizdų informacija neįtraukta." #, boost-format msgid "Do you want to save changes to \"%1%\"?" msgstr "Ar norite išsaugoti \"%1%\" pakeitimus?" #, c-format, boost-format msgid "Successfully unmounted. The device %s (%s) can now be safely removed from the computer." msgstr "Sėkmingai atjungtas. Įrenginį %s(%s) dabar galima saugiai išimti iš kompiuterio." #, c-format, boost-format msgid "Ejecting of device %s (%s) has failed." msgstr "Nepavyko išimti įrenginio %s (%s)." msgid "Previously unsaved items have been detected. Do you want to restore them?" msgstr "Aptikti neišsaugoti elementai. Ar norite juos atkurti?" msgid "Restore" msgstr "Atkurti" msgid "The current heatbed temperature is relatively high. The nozzle may clog when printing this filament in a closed environment. Please open the front door and/or remove the upper glass." msgstr "Kaitinamo pagrindo temperatūra yra gana aukšta. Spausdinant šią giją uždaroje kameroje, purkštukas gali užsikimšti. Prašome atidaryti priekines dureles ir (arba) nuimti viršutinį stiklą." msgid "The nozzle hardness required by the filament is higher than the default nozzle hardness of the printer. Please replace the hardened nozzle or filament, otherwise, the nozzle will be worn down or damaged." msgstr "Gijai reikalingas purkštuko kietumas yra didesnis už numatytąjį spausdintuvo purkštuko kietumą. Pakeiskite purkštuką į grūdintą arba naudokite kitą giją, kitaip purkštukas nusidėvės arba bus sugadintas." msgid "Enabling traditional timelapse photography may cause surface imperfections. It is recommended to change to smooth mode." msgstr "Įjungus standartinę pakadrinę fotografiją galimi paviršiaus nelygumai. Rekomenduojama perjungti į glotnų režimą." msgid "Smooth mode for timelapse is enabled, but the prime tower is off, which may cause print defects. Please enable the prime tower, re-slice and print again." msgstr "Įjungtas glotnus pakadrinės fotografijos režimas, tačiau išjungtas valymo bokštas (prime tower), todėl gali atsirasti spausdinimo defektų. Įjunkite valymo bokštą, supjaustykite (re-slice) iš naujo ir paleiskite spausdinimą." msgid "Expand sidebar" msgstr "Išskleisti šoninę juostą" msgid "Collapse sidebar" msgstr "Sutraukti šoninę juostą" msgid "Tab" msgstr "Tab" #, c-format, boost-format msgid "Loading file: %s" msgstr "Įkeliamas failas: %s" msgid "Load 3MF" msgstr "Įkelti 3MF" msgid "BambuStudio Project" msgstr "„BambuStudio“ projektas" msgid "The 3MF is not supported by OrcaSlicer, loading geometry data only." msgstr "3MF nepalaikomas Orca Slicer. Įkeliami tik geometrijos duomenys." msgid "The 3MF file was generated by an old OrcaSlicer version, loading geometry data only." msgstr "3MF failas buvo sukurtas naudojant seną „OrcaSlicer“ versiją, įkeliami tik geometrijos duomenys." msgid "The 3MF file was generated by an older version, loading geometry data only." msgstr "3MF failas buvo sukurtas naudojant senesnę versiją, įkeliami tik geometrijos duomenys." msgid "The 3MF file was generated by BambuStudio, loading geometry data only." msgstr "3MF failą sukūrė „BambuStudio“, įkeliami tik geometrijos duomenis." msgid "This project was created with an OrcaSlicer 2.3.1-alpha and uses infill rotation template settings that may not work properly with your current infill pattern. This could result in weak support or print quality issues." msgstr "Šis projektas buvo sukurtas naudojant „OrcaSlicer 2.3.1-alpha“ ir jame naudojami užpildymo rotacijos šablono nustatymai, kurie gali neveikti tinkamai su jūsų dabartiniu užpildymo modeliu. Dėl to gali atsirasti silpnos atramos arba spausdinimo kokybės problemos." msgid "Would you like OrcaSlicer to automatically fix this by clearing the rotation template settings?" msgstr "Ar norėtumėte, kad „OrcaSlicer“ automatiškai ištaisytų šią problemą, išvalydamas sukimosi šablono nustatymus?" #, c-format, boost-format msgid "The 3MF file version %s is newer than %s's version %s, found the following unrecognized keys:" msgstr "3mf versija %s yra naujesnė už %s versiją %s, rasta nepažįstamų raktų:" msgid "You should update your software.\n" msgstr "Geriau jau atnaujinkite savo programinę įrangą\n" #, c-format, boost-format msgid "The 3MF file version %s is newer than %s's version %s, we suggest to upgrade your software." msgstr "3MF failo versija %s yra naujesnė nei %s versija %s. Siūloma atnaujinti jūsų programinę įrangą." #, c-format, boost-format msgid "The 3MF was created by BambuStudio (version %s), which is newer than the compatible version %s. Found unrecognized settings:" msgstr "3MF failą sukūrė „BambuStudio“ (versija %s), kuri yra naujesnė už suderinamą versiją %s. Rasta nepažįstamų nustatymų:" #, c-format, boost-format msgid "The 3MF was created by BambuStudio (version %s), which is newer than the compatible version %s. Some settings may not be fully compatible." msgstr "3MF failą sukūrė „BambuStudio“ (versija %s), kuri yra naujesnė už suderinamą versiją %s. Kai kurie nustatymai gali būti nevisiškai suderinami." msgid "The 3MF was created by BambuStudio. Some settings may differ from OrcaSlicer." msgstr "3MF failą sukūrė „BambuStudio“. Kai kurie nustatymai gali skirtis nuo „OrcaSlicer“ nustatymų." msgid "Invalid values found in the 3MF:" msgstr "3MF rasti netinkami duomenys:" msgid "Please correct them in the Param tabs" msgstr "Prašome juos ištaisyti parametrų skirtukuose" msgid "The 3MF has the following modified G-code in filament or printer presets:" msgstr "3MF faile yra šie modifikuoti G-kodai gijos ar spausdintuvo profiliuose:" msgid "Please confirm that all modified G-code is safe to prevent any damage to the machine!" msgstr "Prašome patvirtinti, kad šie modifikuoti G-kodai yra saugūs ir nesugadins jūsų įrangos!" msgid "Modified G-code" msgstr "Modifikuotas G-kodas" msgid "The 3MF has the following customized filament or printer presets:" msgstr "3MF faile yra šie pritaikyti gijos ar spausdintuvo profiliai:" msgid "Please confirm that the G-code within these presets is safe to prevent any damage to the machine!" msgstr "Patvirtinkite, kad šiuose profiliuose esantis G-kodas yra saugus, kad išvengtumėte įrenginio pažeidimų!" msgid "Customized Preset" msgstr "Pritaikytas profilis" msgid "Component name(s) inside step file not in UTF8 format!" msgstr "Komponentų pavadinimai STEP faile nėra UTF-8 formato!" msgid "Because of unsupported text encoding, garbage characters may appear!" msgstr "Dėl nepalaikomos teksto koduotės gali atsirasti šiukšlių simbolių!" msgid "Remember my choice." msgstr "Prisiminti pasirinkimus." #, boost-format msgid "Failed loading file \"%1%\". An invalid configuration was found." msgstr "Nepavyko įkelti \"%1%\" failo. Aptikta netinkama konfigūracija." msgid "Objects with zero volume removed" msgstr "Nulinio tūrio objektai pašalinti" msgid "The volume of the object is zero" msgstr "Objekto tūris nulinis" #, c-format, boost-format msgid "" "The object from file %s is too small, and may be in meters or inches.\n" " Do you want to scale to millimeters?" msgstr "" "Objektas iš failo „%s“ yra per mažas ir galimai nurodytas metrais arba coliais.\n" "Ar norite mastelį pakeisti į milimetrus?" msgid "Object too small" msgstr "Objektas per mažas" msgid "" "This file contains several objects positioned at multiple heights.\n" "Instead of considering them as multiple objects, should \n" "the file be loaded as a single object with multiple parts?" msgstr "" "Šiame faile yra keli objektai, išdėstyti keliuose aukščiuose.\n" "Užuot laikę juos keliais objektais, turėtumėte\n" "failas įkeliamas kaip vienas objektas, turintis kelias dalis?" msgid "Multi-part object detected" msgstr "Aptiktas kelių dalių objektas" msgid "Load these files as a single object with multiple parts?\n" msgstr "Ar įkelti šiuos failus kaip vieną objektą su keliomis detalėmis?\n" msgid "An object with multiple parts was detected" msgstr "Aptiktas objektas su keliomis detalėmis" msgid "Auto-Drop" msgstr "Automatinis nuleidimas" #, c-format, boost-format msgid "Connected printer is %s. It must match the project preset for printing.\n" msgstr "" "Prijungtas spausdintuvas yra %s. Jis turi sutapti su spausdinimui pasirinktu projekto profiliu.\n" "\n" msgid "Do you want to sync the printer information and automatically switch the preset?" msgstr "Ar norite sinchronizuoti spausdintuvo informaciją ir automatiškai perjungti profilį?" msgid "The file does not contain any geometry data." msgstr "Faile nėra jokių geometrinių duomenų." msgid "Your object appears to be too large, do you want to scale it down to fit the print bed automatically?" msgstr "Jūsų objektas per didelis. Ar norite jį automatiškai sumažinti, kad tilptų ant spausdinimo pagrindo?" msgid "Object too large" msgstr "Objektas per didelis" msgid "Export STL file:" msgstr "Eksportuoti STL failą:" msgid "Export Draco file:" msgstr "Eksportuoti „Draco“ failą:" msgid "Export AMF file:" msgstr "Eksportuoti AMF failą:" msgid "Save file as" msgstr "Išsaugoti failą kaip" msgid "Export OBJ file:" msgstr "Eksportuoti OBJ failą:" #, c-format, boost-format msgid "" "The file %s already exists.\n" "Do you want to replace it?" msgstr "" "Failas %s jau yra\n" "Ar norite jį perrašyti?" msgid "Confirm Save As" msgstr "Patvirtinti Išsaugoti kaip" msgid "Delete object which is a part of cut object" msgstr "Pašalinti objektą su dalimi perpjauto objekto" msgid "" "You are trying to delete an object which is a part of a cut object.\n" "This action will break a cut correspondence.\n" "After that, model consistency can't be guaranteed." msgstr "" "Bandote ištrinti objektą, kuris yra supjaustyto objekto dalis.\n" "Šis veiksmas sugadins pjovimo atitikimą.\n" "Po šio veiksmo modelio vientisumas negali būti garantuotas." # AI Translated msgid "Delete Object" msgstr "Ištrinti objektą" # AI Translated msgid "Delete All Objects" msgstr "Ištrinti visus objektus" # AI Translated msgid "Reset Project" msgstr "Atkurti projektą" msgid "The selected object couldn't be split." msgstr "Pasirinkto objekto negalima suskaidyti." # AI Translated msgid "Split to Objects" msgstr "Skaidyti į objektus" msgid "Disable Auto-Drop to preserve Z positioning?\n" msgstr "Išjungti automatinį nuleidimą, kad būtų išsaugota Z pozicija?\n" msgid "Object with floating parts was detected" msgstr "Aptiktas objektas su ore kabančiomis dalimis" msgid "Another export job is running." msgstr "Vyksta kitas eksportavimo procesas." msgid "Unable to replace with more than one volume" msgstr "Nepavyko pakeisti daugiau nei vienu tomu" msgid "Error during replacement" msgstr "Klaida įkeliant iš naujo" msgid "Replace from:" msgstr "Pakeisti iš:" msgid "Select a new file" msgstr "Pasirinkite naują failą" msgid "File for the replacement wasn't selected" msgstr "Nepasirinktas keičiamas failas" # AI Translated msgid "Replace with 3D file" msgstr "Pakeisti 3D failu" msgid "Select folder to replace from" msgstr "Pasirinkite aplanką, iš kurio pakeisti" msgid "Directory for the replace wasn't selected" msgstr "Nepasirinktas katalogas, iš kurio keisti" msgid "Replaced with 3D files from directory:\n" msgstr "" "Pakeista 3D failais iš katalogo:\n" "\n" #, boost-format msgid "✖ Skipped %1%: same file.\n" msgstr "✖ Praleistas %1%: tas pats failas.\n" #, boost-format msgid "✖ Skipped %1%: file does not exist.\n" msgstr "✖ Praleistas %1%: failas neegzistuoja.\n" #, boost-format msgid "✖ Skipped %1%: failed to replace.\n" msgstr "✖ Praleistas %1%: nepavyko pakeisti.\n" #, boost-format msgid "✔ Replaced %1%.\n" msgstr "✔ Pakeistas %1%.\n" msgid "Replaced volumes" msgstr "Pakeisti tūriai" msgid "Please select a file" msgstr "Prašome pasirinkti failą" msgid "Do you want to replace it" msgstr "Ar norite jį pakeisti" msgid "Message" msgstr "Pranešimas" msgid "Reload from:" msgstr "Įkelti iš naujo iš:" msgid "Unable to reload:" msgstr "Nepavyko įkelti iš naujo:" msgid "Error during reload" msgstr "Klaida įkeliant iš naujo" # AI Translated msgid "Reload all" msgstr "Įkelti viską iš naujo" msgid "There are warnings after slicing models:" msgstr "Po sluoksniavimo yra įspėjimų:" msgid "warnings" msgstr "įspėjimai" msgid "Invalid data" msgstr "Netinkami duomenys" msgid "Slicing Canceled" msgstr "Sluoksniavimas atšauktas" #, c-format, boost-format msgid "Slicing Plate %d" msgstr "Sluoksniuojamas pagrindas %d" msgid "Please resolve the slicing errors and publish again." msgstr "Prašome sutvarkyti sluoksniavimo klaidas ir publikuoti dar kartą." msgid "Network plug-in switched successfully." msgstr "Tinklo įskiepis sėkmingai pakeistas." msgid "Success" msgstr "Sėkmingai" msgid "Failed to load network plug-in. Please restart the application." msgstr "Nepavyko įkelti tinklo įskiepio. Paleiskite programą iš naujo." msgid "The network plug-in was not detected. Network related features are unavailable." msgstr "Neaptiktas tinklo įskiepis. Nebus pasiekiamos su tinklu susijusios galimybės." msgid "" "Preview only mode:\n" "The loaded file contains G-code only, cannot enter the Prepare page." msgstr "" "Tik peržiūros režimas:\n" "Įkeltas failas turi tik G-kodą. Negalima pereiti į Paruošimo režimą." msgid "" "The nozzle type and AMS quantity information has not been synced from the connected printer.\n" "After syncing, software can optimize printing time and filament usage when slicing.\n" "Would you like to sync now?" msgstr "" "Purkštuko tipo ir AMS kiekio informacija nebuvo sinchronizuota iš prijungto spausdintuvo.\n" "Po sinchronizavimo programinė įranga pjaustymo metu gali optimizuoti spausdinimo laiką ir gijos sunaudojimą.\n" "Ar norite sinchronizuoti dabar?" msgid "Sync now" msgstr "Sinchronizuoti dabar" msgid "You can keep the modified presets for the new project or discard them" msgstr "Pakeistus profilius galite išsaugoti naujam projektui arba juos atmesti" msgid "Creating a new project" msgstr "Naujo projekto kūrimas" msgid "Load project" msgstr "Įkelti projektą" msgid "" "Failed to save the project.\n" "Please check whether the folder exists online or if other programs have the project file open." msgstr "" "Nepavyko išsaugoti projekto.\n" "Prašome patikrinti, ar nurodytas katalogas egzistuoja tinkle ir ar kitos programos nenaudoja projekto failo." msgid "Save project" msgstr "Išsaugoti projektą" msgid "Importing Model" msgstr "Importuojamas modelis" msgid "Preparing 3MF file..." msgstr "Ruošiamas 3MF failas..." msgid "Download failed; unknown file format." msgstr "Atsisuntimas nepavyko, nežinomas failo tipas." msgid "Downloading project..." msgstr "Projektas atsisiunčiamas..." msgid "Download failed; File size exception." msgstr "Atsisiųsti nepavyko. Failo dydžio išimtis." #, c-format, boost-format msgid "Project downloaded %d%%" msgstr "Projektas atsisiųstas %d%%" msgid "Importing to Orca Slicer failed. Please download the file and manually import it." msgstr "Nepavyko importuoti į Orca Slicer. Prašome atsisiųsti failą ir rankiniu būdu jį importuoti." msgid "INFO:" msgstr "INFORMACIJA:" msgid "No accelerations provided for calibration. Use default acceleration value " msgstr "Kalibravimui nepateikti jokie pagreičiai. Naudokite numatytąją pagreičio vertę " msgid "No speeds provided for calibration. Use default optimal speed " msgstr "Kalibravimo greičiai nenumatyti. Naudokite numatytąjį optimalų greitį " msgid "Import SLA archive" msgstr "Importuoti SLA archyvą" msgid "The selected file" msgstr "Pasirinktame faile" msgid "Does not contain valid G-code." msgstr "Jame nėra galiojančio G-kodo." msgid "An Error has occurred while loading the G-code file." msgstr "Įkeliant G-kodo failą įvyko klaida" #. TRN %1% is archive path #, boost-format msgid "Loading of a ZIP archive on path %1% has failed." msgstr "Nepavyko įkelti %1% esančio ZIP archyvo." #. TRN: First argument = path to file, second argument = error description #, boost-format msgid "Failed to unzip file to %1%: %2%" msgstr "Nepavyko išskleisti zip failo į %1%: %2%" #, boost-format msgid "Failed to find unzipped file at %1%. Unzipping of file has failed." msgstr "Nepavyko %1% rasti išskleisto zip failo. Nepavyko išskleisti failo." msgid "Drop project file" msgstr "Užmeskite projekto failą" msgid "Please select an action" msgstr "Prašome pasirinkti veiksmą" msgid "Open as project" msgstr "Atidaryti kaip projektą" msgid "Import geometry only" msgstr "Importuoti tik geometriją" msgid "Only one G-code file can be opened at a time." msgstr "Vienu metu gali būti atidarytas tik vienas G-kodo failas." msgid "G-code loading" msgstr "Įkeliamas G-kodas" msgid "G-code files and models cannot be loaded together!" msgstr "G-kodas negali būti įkeltas kartu su modeliais!" msgid "Unable to add models in preview mode" msgstr "Negalima pridėti modelių peržiūros režime!" msgid "All objects will be removed, continue?" msgstr "Visi objektai bus pašalinti, ar tęsti?" msgid "The current project has unsaved changes. Would you like to save before continuing?" msgstr "Dabartiniame projekte yra neišsaugotų pakeitimų. Ar norite išsaugoti prieš tęsiant?" msgid "Number of copies:" msgstr "Kopijų skaičius:" msgid "Copies of the selected object" msgstr "Pasirinkto objekto kopijos" msgid "Save G-code file as:" msgstr "Išsaugoti G-kodo failą kaip:" msgid "Save SLA file as:" msgstr "Išsaugoti SLA failą kaip:" msgid "The provided file name is not valid." msgstr "Pateiktas failo pavadinimas netinkamas." msgid "The following characters are not allowed by a FAT file system:" msgstr "FAT failų sistemoje neleidžiami šie simboliai:" msgid "Save Sliced file as:" msgstr "Išsaugoti susluoksniuotą failą kaip:" #, c-format, boost-format msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer." msgstr "Failas %s išsiųstas į spausdintuvo laikmeną ir gali būti peržiūrimas spausdintuve." msgid "The nozzle type is not set. Please set the nozzle and try again." msgstr "Purkštuko tipas nenustatytas. Nustatykite purkštuką ir bandykite dar kartą." msgid "The nozzle type is not set. Please check." msgstr "Purkštuko tipas nenustatytas. Patikrinkite." msgid "Unable to perform boolean operation on model meshes. Only positive parts will be kept. You may fix the meshes and try again." msgstr "Nepavyksta atlikti loginės operacijos su modelio tinkleliais. Bus išsaugotos tik teigiamos dalys. Galite pataisyti tinklelius ir bandyti dar kartą." #, boost-format msgid "Reason: part \"%1%\" is empty." msgstr "Priežastis: tuščia \"%1%\" detalė." #, boost-format msgid "Reason: part \"%1%\" does not bound a volume." msgstr "\"Priežastis: dalis \"%1%\" neapibrėžia tūrio." #, boost-format msgid "Reason: part \"%1%\" has self intersection." msgstr "Priežastis: dalis \"%1%\" kertasi su savimi." #, boost-format msgid "Reason: \"%1%\" and another part have no intersection." msgstr "Priežastis: \"%1%\" ir kita dalis nesikerta." msgid "Unable to perform boolean operation on model meshes. Only positive parts will be exported." msgstr "Nepavyksta atlikti loginės operacijos su modelio figūromis. Eksportuojamos tik teigiamos dalys." msgid "Flashforge host is not available." msgstr "„Flashforge“ serveris nepasiekiamas." msgid "Unable to log in to the Flashforge printer." msgstr "Nepavyksta prisijungti prie „Flashforge“ spausdintuvo." msgid "Is the printer ready? Is the print sheet in place, empty and clean?" msgstr "Ar spausdintuvas pasiruošęs? Ar spausdinimo plokštuma yra vietoje, tuščia ir švari?" msgid "Upload and Print" msgstr "Įkelti ir spausdinti" msgid "Abnormal print file data. Please slice again" msgstr "Nenormalūs spausdinimo failo duomenys. Atlikite sluoksniavimą dar kartą" msgid "" "Print By Object: \n" "We suggest using auto-arrange to avoid collisions when printing." msgstr "" "Spausdinimas pagal objektus:\n" "Siekiant spausdinant išvengti susidūrimų, patariama naudoti automatinį išdėstymą." msgid "Send G-code" msgstr "Siųsti G-kodą" msgid "Send to printer" msgstr "Siųsti į spausdintuvą" msgid "Custom supports and color painting were removed before repairing." msgstr "Prieš taisymą pašalintos pasirinktinės atramos ir dažymas spalvomis." msgid "Optimize Rotation" msgstr "Optimizuoti sukimąsi" #, c-format, boost-format msgid "Printer not connected. Please go to the device page to connect %s before syncing." msgstr "Spausdintuvas neprijungtas. Prieš sinchronizuodami, eikite į įrenginio puslapį ir prijunkite %s." #, c-format, boost-format msgid "OrcaSlicer can't connect to %s. Please check if the printer is powered on and connected to the network." msgstr "„OrcaSlicer“ nepavyksta prisijungti prie %s. Patikrinkite, ar spausdintuvas įjungtas ir prijungtas prie tinklo." #, c-format, boost-format msgid "The currently connected printer on the device page is not %s. Please switch to %s before syncing." msgstr "Įrenginio puslapyje šiuo metu prijungtas spausdintuvas nėra %s. Prieš sinchronizuodami perjunkite į %s." msgid "There are no filaments on the printer. Please load the filaments on the printer first." msgstr "Spausdintuve nėra gijų. Pirmiausia įspauskite (įkelkite) gijas į spausdintuvą." msgid "The filaments on the printer are all unknown types. Please go to the printer screen or software device page to set the filament type." msgstr "Visos spausdintuve esančios gijos yra nežinomo tipo. Gijos tipą nustatykite spausdintuvo ekrane arba programos įrenginio puslapyje." msgid "Device Page" msgstr "Įrenginio puslapis" msgid "Synchronize AMS Filament Information" msgstr "Sinchronizuoti AMS gijų informaciją" # AI Translated msgid "OrcaCloud plugins required by the current preset are not installed:" msgstr "Neįdiegti dabartiniam profiliui reikalingi OrcaCloud papildiniai:" # AI Translated msgid "Install Plugins" msgstr "Įdiegti papildinius" # AI Translated msgid "Local plugins required by the current preset are missing:" msgstr "Trūksta dabartiniam profiliui reikalingų vietinių papildinių:" # AI Translated msgid "Find on OrcaCloud" msgstr "Rasti OrcaCloud" # AI Translated msgid "Plugins required by the current preset are not activated:" msgstr "Dabartiniam profiliui reikalingi papildiniai neaktyvuoti:" # AI Translated msgid "Activate Now" msgstr "Aktyvuoti dabar" # AI Translated msgid "The installed plugin does not provide the required capability — it may be outdated:" msgstr "Įdiegtas papildinys nesuteikia reikalingos galimybės – jis gali būti pasenęs:" # AI Translated msgid "Preparing to install plugins..." msgstr "Ruošiamasi įdiegti papildinius..." # AI Translated msgid "Installing plugins" msgstr "Įdiegiami papildiniai" # AI Translated msgid "Cancelling — finishing the current plugin..." msgstr "Atšaukiama – užbaigiamas dabartinis papildinys..." # AI Translated #, boost-format msgid "Installing %1%..." msgstr "Įdiegiama %1%..." msgid "Plate Settings" msgstr "Spausdinimo pagrindo nustatymai" #, boost-format msgid "Number of currently selected parts: %1%\n" msgstr "Dabar pasirinktų detalių skaičius: %1%\n" #, boost-format msgid "Number of currently selected objects: %1%\n" msgstr "Dabar pasirinktų objektų skaičius: %1%\n" #, boost-format msgid "Part name: %1%\n" msgstr "Detalės pavadinimas: %1%\n" #, boost-format msgid "Object name: %1%\n" msgstr "Objekto pavadinimas: %1%\n" #, boost-format msgid "Size: %1% x %2% x %3% in\n" msgstr "Dydis: %1% x %2% x %3% col\n" #, boost-format msgid "Size: %1% x %2% x %3% mm\n" msgstr "Dydis: %1% x %2% x %3% mm\n" #, boost-format msgid "Volume: %1% in³\n" msgstr "Tūris: %1% col³\n" #, boost-format msgid "Volume: %1% mm³\n" msgstr "Tūris: %1% mm³\n" #, boost-format msgid "Triangles: %1%\n" msgstr "Trikampių: %1%\n" msgid "Use \"Fix Model\" to repair the mesh." msgstr "Naudokite funkciją „Sutaisyti modelį“, kad pataisytumėte dalį." #, c-format, boost-format msgid "Plate %d: %s is not suggested for use printing filament %s (%s). If you still want to do this print job, please set this filament's bed temperature to a number that is not zero." msgstr "Plokštėje %d: %s nerekomenduojama spausdinti su gija %s (%s). Jei vis tiek norite spausdinti, nustatykite šios gijos plokštės temperatūrą į didesnę nei 0." msgid "Currently, the object configuration form cannot be used with a multiple-extruder printer." msgstr "Šiuo metu objekto konfigūracijos formos negalima naudoti su spausdintuvu, turinčiu kelis ekstruderius." msgid "Not available" msgstr "Neprieinama" msgid "isometric" msgstr "izometrinis" msgid "top_front" msgstr "viršus-priekis" msgid "top" msgstr "viršus" msgid "bottom" msgstr "apačia" msgid "front" msgstr "priekis" msgid "rear" msgstr "galas" msgid "Switching languages requires the application to restart.\n" msgstr "Kalbos keitimas reikalauja programos paleidimo iš naujo.\n" msgid "Do you want to continue?" msgstr "Ar norite tęsti?" msgid "Language selection" msgstr "Kalbos pasirinkimas" msgid "Switching application language while some presets are modified." msgstr "Keičiama programos kalba, kai yra pakeistų profilių." msgid "Asia-Pacific" msgstr "Azija-Ramusis vandenynas" msgid "China" msgstr "Kinija" msgid "Europe" msgstr "Europa" msgid "North America" msgstr "Šiaurės Amerika" msgid "Others" msgstr "Kita" msgid "Changing the region will log you out of your account.\n" msgstr "Keičiant regioną bus atjungta jūsų paskyra.\n" msgid "Region selection" msgstr "Regiono pasirinkimas" msgid "sec" msgstr "sek." msgid "The period of backup in seconds." msgstr "Atsarginės kopijos kūrimo laikotarpis sekundėmis." msgid "Bed Temperature Difference Warning" msgstr "Įspėjimas dėl pagrindo temperatūrų skirtumo" msgid "" "Using filaments with significantly different temperatures may cause:\n" "• Extruder clogging\n" "• Nozzle damage\n" "• Layer adhesion issues\n" "\n" "Continue with enabling this feature?" msgstr "" "Naudojant gijas su žymiai skirtingomis temperatūromis, gali kilti šios problemos:\n" "• Ekstruderio užsikimšimas\n" "• Purkštuko pažeidimas\n" "• Sluoksnių sukibimo problemos\n" "\n" "Ar tęsti ir įjungti šią funkciją?" msgid "Browse" msgstr "Naršyti" msgid "Choose folder for downloaded items" msgstr "Pasirinkite atsisiunčiamų failų aplanką" msgid "Choose Download Directory" msgstr "Pasirinkite parsisiuntimo katalogą" #, c-format, boost-format msgid "" "You've selected network plug-in version %s.\n" "\n" "Would you like to download and install this version now?\n" "\n" "Note: The application may need to restart after installation." msgstr "" "Pasirinkote %s tinklo įskiepio versiją.\n" "\n" "Ar norite atsisiųsti ir įdiegti šią versiją dabar?\n" "\n" "Pastaba: įdiegus programą gali reikėti paleisti iš naujo." msgid "Download Network Plug-in" msgstr "Atsisiųsti tinklo įskiepį" msgid "Reload the network plug-in without restarting the application" msgstr "Iš naujo įkelti tinklo įskiepį neperkraunant programos" msgid "Network plug-in reloaded successfully." msgstr "Tinklo įskiepis sėkmingai įkeltas iš naujo." msgid "Reload" msgstr "Įkelti iš naujo" msgid "Failed to reload network plug-in. Please restart the application." msgstr "Nepavyko iš naujo įkelti tinklo įskiepio. Paleiskite programą iš naujo." msgid "Reload Failed" msgstr "Pakartotinis įkėlimas nepavyko" msgid "Associate" msgstr "Susietas" msgid "with OrcaSlicer so that Orca can open models from" msgstr "su \"OrcaSlicer\", kad \"Orca\" galėtų atverti modelius iš" msgid "Current Association: " msgstr "Dabartinis susiejimas: " msgid "Current Instance" msgstr "Dabartinė versija" msgid "Current Instance Path: " msgstr "Dabartinės versijos kelias: " msgid "General" msgstr "Bendras" msgid "Metric" msgstr "Metrinė" msgid "Imperial" msgstr "Imperinė" msgid "Units" msgstr "Vienetai" msgid "Home" msgstr "Pradžia" msgid "Default page" msgstr "Numatytas puslapis" msgid "Set the page opened on startup." msgstr "Nustatyti, kuris puslapis atsidarys paleidus programą." msgid "Enable dark Mode" msgstr "Įjungti tamsųjį režimą" msgid "Allow only one OrcaSlicer instance" msgstr "Leisti tik vieną Orca Slicer egzempliorių" msgid "On OSX there is always only one instance of app running by default. However it is allowed to run multiple instances of same app from the command line. In such case this settings will allow only one instance." msgstr "OSX visada veikia tik vienas programos egzempliorius pagal numatytuosius nustatymus. Tačiau komandinėje eilutėje leidžiama paleisti kelis tos pačios programos egzempliorius. Šiuo atveju nustatymai leis tik vieną egzempliorių." msgid "If this is enabled, when starting OrcaSlicer and another instance of the same OrcaSlicer is already running, that instance will be reactivated instead." msgstr "Jei įjungta, paleidus „Orca Slicer“ kai kitas tos pačios „Orca Slicer“ programos egzempliorius jau veikia, bus suaktyvintas tas jau veikiantis egzempliorius, o ne paleistas naujas." msgid "Show splash screen" msgstr "Rodyti paleidimo ekraną" msgid "Show the splash screen during startup." msgstr "Paleidžiant programą rodyti informacinį ekramą." msgid "Use window buttons on left side" msgstr "Naudokite kairėje pusėje esančius langų mygtukus" msgid "(Requires restart)" msgstr "(Reikia paleisti iš naujo)" msgid "Downloads folder" msgstr "Atsisiuntimų aplankas" msgid "Target folder for downloaded items" msgstr "Atsisiunčiamų failų paskirties aplankas" msgid "Load All" msgstr "Įkelti viską" msgid "Ask When Relevant" msgstr "Klausti, kai aktualu" msgid "Always Ask" msgstr "Visada klausti" msgid "Load Geometry Only" msgstr "Įkelti tik geometriją" msgid "Load behaviour" msgstr "Įkelti elgseną" msgid "Should printer/filament/process settings be loaded when opening a 3MF file?" msgstr "Ar atidarant 3MF failą reikėtų įkelti spausdintuvo / gijos / proceso profilius?" msgid "Auto backup" msgstr "Automatinis atsarginis kopijavimas" msgid "Backup your project periodically to help with restoring from an occasional crash." msgstr "Periodiškai saugoti jūsų projekto atsargines kopijas kad programos gedimo atveju jį būtų galima atkurti." msgid "Maximum recent files" msgstr "Maksimalus naujausių failų skaičius" msgid "Maximum count of recent files" msgstr "Maksimalus naujausių failų skaičius" msgid "Add STL/STEP files to recent files list" msgstr "Pridėti STL/STEP failus į naujausių failų sąrašą" msgid "Don't warn when loading 3MF with modified G-code" msgstr "Nerodyti perspėjimų įkeliant 3MF su modifikuotais G-kodais" msgid "Show options when importing STEP file" msgstr "Rodyti parinktis importuojant STEP failą" msgid "If enabled, a parameter settings dialog will appear during STEP file import." msgstr "Jei įjungta, STEP failo importavimo metu atsiras parametrų nustatymų dialogas." msgid "STEP importing: linear deflection" msgstr "STEP importavimas: tiesinis nukrypimas" msgid "" "Linear deflection used when meshing imported STEP files.\n" "Smaller values produce higher-quality meshes but increase processing time.\n" "Used as the default in the import dialog, or directly when the import dialog is disabled.\n" "Default: 0.003 mm." msgstr "" "Tiesinis nukrypimas, naudojamas generuojant importuotų STEP failų tinklelį.\n" "Mažesnės vertės sukuria aukštesnės kokybės tinklelius, tačiau padidina apdorojimo laiką.\n" "Naudojamas kaip numatytoji vertė importavimo lange arba tiesiogiai, kai importavimo langas išjungtas.\n" "Numatytoji vertė: 0,003 mm." msgid "STEP importing: angle deflection" msgstr "STEP importavimas: kampinis nukrypimas" msgid "" "Angle deflection used when meshing imported STEP files.\n" "Smaller values produce higher-quality meshes but increase processing time.\n" "Used as the default in the import dialog, or directly when the import dialog is disabled.\n" "Default: 0.5." msgstr "" "Kampinis nukrypimas, naudojamas generuojant importuotų STEP failų tinklelį.\n" "Mažesnės vertės sukuria aukštesnės kokybės tinklelius, tačiau padidina apdorojimo laiką.\n" "Naudojamas kaip numatytoji vertė importavimo lange arba tiesiogiai, kai importavimo langas išjungtas.\n" "Numatytoji vertė: 0,5." msgid "STEP importing: Split into multiple objects" msgstr "STEP importavimas: išskaidyti į kelis objektus" msgid "" "If enabled, compound and compsolid shapes in imported STEP files are split into multiple objects.\n" "Used as the default in the import dialog, or directly when the import dialog is disabled.\n" "Default: disabled." msgstr "" "Jei įjungta, sudėtinės („compound“) ir „compsolid“ formos importuotuose STEP failuose yra išskaidomos į kelis objektus.\n" "Naudojama kaip numatytoji nuostata importavimo lange arba tiesiogiai, kai importavimo langas išjungtas.\n" "Numatytoji būsena: išjungta." msgid "Quality level for Draco export" msgstr "„Draco“ eksporto kokybės lygis" msgid "bits" msgstr "bitai" msgid "" "Controls the quantization bit depth used when compressing the mesh to Draco format.\n" "0 = lossless compression (geometry is preserved at full precision). Valid lossy values range from 8 to 30.\n" "Lower values produce smaller files but lose more geometric detail; higher values preserve more detail at the cost of larger files." msgstr "" "Valdo kvantavimo bitų gylį, naudojamą suspaudžiant tinklelio modelį į „Draco“ formatą.\n" "0 = suspaudimas be praradimų (geometrija išsaugoma visu tikslumu). Leistinos prarandamos vertės yra nuo 8 iki 30.\n" "Mažesnės vertės sukuria mažesnius failus, bet prarandama daugiau geometrinių detalių; didesnės vertės išsaugo daugiau detalių, tačiau failai būna didesni." msgid "Store full source file paths in projects" msgstr "Projekte saugoti visus šaltinio failų kelius" msgid "If enabled, saved projects store the absolute path to imported source files (STEP/STL/...), so \"Reload from disk\" still works when the source file is kept in a different folder than the project. If disabled, only the filename is stored, which keeps projects portable and avoids embedding absolute paths." msgstr "Jei įjungta, išsaugotuose projektuose saugomas absoliutus kelias iki importuotų šaltinio failų (STEP/STL/...), todėl funkcija „Įkelti iš naujo iš disko“ (Reload from disk) veikia ir tada, kai šaltinio failas laikomas kitame aplanke nei projektas. Jei išjungta, saugomas tik failo pavadinimas, todėl projektai išlieka lengvai perkeliami ir išvengiama absoliučių kelių įtraukimo." msgid "Preset" msgstr "Profilis" msgid "Remember printer configuration" msgstr "Atsiminti spausdintuvo konfigūraciją" msgid "If enabled, Orca will remember and switch filament/process configuration for each printer automatically." msgstr "Jei įjungta, „Orca“ automatiškai įsimins ir perjungs gijos / proceso profilius kiekvienam spausdintuvui." msgid "Group user filament presets" msgstr "Grupuoti naudotojo gijų profilius" msgid "Group user filament presets based on selection" msgstr "Grupuoti naudotojo gijų profilius pagal pasirinkimą" msgid "By type" msgstr "Pagal tipą" msgid "By vendor" msgstr "Pagal gamintoją" msgid "Optimize filaments area height for..." msgstr "Optimizuoti gijų srities aukštį..." msgid "filaments" msgstr "gijos" msgid "Optimizes filament area maximum height by chosen filament count." msgstr "Optimizuoja maksimalų gijų srities aukštį pagal pasirinktą gijų skaičių." msgid "Show shared profiles notification" msgstr "Rodyti pranešimus apie bendrinamus profilius" msgid "Show a notification with a link to browse shared profiles when the selected printer is changed." msgstr "Pakeitus pasirinktą spausdintuvą, rodyti pranešimą su nuoroda, leidžiančia peržiūrėti bendrinamus profilius." msgid "Features" msgstr "Funkcijos" msgid "Multi device management" msgstr "Kelių įrenginių valdymas" msgid "With this option enabled, you can send a task to multiple devices at the same time and manage multiple devices." msgstr "Kai įjungta ši funkcija, jūs galite siųsti užduotį keliems įrenginiams vienu metu, taip apt kontroliuoti keletą įrenginių." msgid "Pop up to select filament grouping mode" msgstr "Iššokantis langas gijų grupavimo režimui pasirinkti" msgid "Behaviour" msgstr "Elgsena" msgid "Auto flush after changing..." msgstr "Automatinis išvalymas pakeitus..." msgid "Auto calculate flushing volumes when selected values changed" msgstr "Automatiškai apskaičiuoti išvalymo tūrius, kai pasikeičia pasirinktos vertės" msgid "Auto arrange plate after cloning" msgstr "Automatiškai išdėstyti objektus ant pagrindo po klonavimo" msgid "Auto slice after changes" msgstr "Automatinis sluoksniavimas po pakeitimų" msgid "If enabled, OrcaSlicer will re-slice automatically whenever slicing-related settings change." msgstr "Jei įjungta, „OrcaSlicer“ automatiškai supjaustys (re-slice) modelį iš naujo, kai tik pasikeis su sluoksniavimu susiję nustatymai." msgid "Delay in seconds before auto slicing starts, allowing multiple edits to be grouped. Use 0 to slice immediately." msgstr "Delsiama sekundėmis prieš pradedant automatinį sluoksniavimą, kad būtų galima sugrupuoti kelis pakeitimus. Įveskite 0, jei norite sluoksniuoti iš karto." msgid "Remove mixed temperature restriction" msgstr "Pašalinti mišrios temperatūros ribojimą" msgid "With this option enabled, you can print materials with a large temperature difference together." msgstr "Įjungus šią parinktį, galite kartu spausdinti medžiagas, turinčias didelį temperatūrų skirtumą." msgid "Touchpad" msgstr "Jutiklinis kilimėlis" msgid "Camera style" msgstr "Kameros stilius" msgid "" "Select camera navigation style.\n" "Default: LMB+move for rotation, RMB/MMB+move for panning.\n" "Touchpad: Alt+move for rotation, Shift+move for panning." msgstr "" "Pasirinkite kameros valdymo stilių.\n" "Numatytasis: Kairysis pelės mygtukas + judinti - sukimui, dešinys pelės mygtukas / vidurinis pelės mygtukas + judinti - perkėlimui.\n" "Jutiklinis kilimėlis: Alt + judinti - sukimui, Shift + judinti - perkėlimui." msgid "Orbit speed multiplier" msgstr "Orbitos greičio daugiklis" msgid "Multiplies the orbit speed for finer or coarser camera movement." msgstr "Padidina orbitos greitį, kad kameros judesiai būtų tikslesni arba grubesni." msgid "Zoom to mouse position" msgstr "Išdidinti iki pelės vietos" msgid "Zoom in towards the mouse pointer's position in the 3D view, rather than the 2D window center." msgstr "\"Priartinti prie pelės rodiklio padėties 3D vaizde, o ne prie 2D lango centro." msgid "Use free camera" msgstr "Naudoti laisvą kamerą" msgid "If enabled, use free camera. If not enabled, use constrained camera." msgstr "Jei įjungta, naudoti laisvą kamerą. Jei neįjungta, naudoti stacionarią kamerą." msgid "Reverse mouse zoom" msgstr "Apversti pelės didinimą" msgid "If enabled, reverses the direction of zoom with mouse wheel." msgstr "Jei įjungta, apverčia didinimo ar mažinimo kryptį pelės ratuku." msgid "Pan" msgstr "Slinkimas" msgid "Left Mouse Drag" msgstr "Vilkimas kairiuoju pelės mygtuku" msgid "Set the action that dragging the left mouse button should perform." msgstr "Nustatykite veiksmą, kuris turi būti atliktas, velkant kairiuoju pelės mygtuku." msgid "Middle Mouse Drag" msgstr "Vidurinio pelės mygtuko vilkimas" msgid "Set the action that dragging the middle mouse button should perform." msgstr "Nustatykite veiksmą, kuris turi būti atliktas, velkant vidurinį pelės mygtuką." msgid "Right Mouse Drag" msgstr "Vilkti dešiniuoju pelės mygtuku" msgid "Set the action that dragging the right mouse button should perform." msgstr "Nustatykite veiksmą, kuris turi būti atliktas, velkant dešinįjį pelės mygtuką." msgid "Clear my choice on..." msgstr "Išvalyti mano pasirinkimą..." msgid "Unsaved projects" msgstr "Neišsaugoti projektai" msgid "Clear my choice on the unsaved projects." msgstr "Išvalyti mano pasirinkimus neišsaugotuose projektuose." msgid "Unsaved presets" msgstr "Neišsaugoti profiliai" msgid "Clear my choice on the unsaved presets." msgstr "Išvalyti mano pasirinkimą neišsaugotuose profiliuose." msgid "Synchronizing printer preset" msgstr "Spausdintuvo profilio sinchronizavimas" msgid "Clear my choice for synchronizing printer preset after loading the file." msgstr "Išvalyti mano pasirinkimą dėl spausdintuvo profilio sinchronizavimo įkėlus failą." msgid "Graphics" msgstr "Grafika" msgid "Smooth normals" msgstr "Glotnios normalės" # AI Translated msgid "" "Applies smooth normals to the model.\n" "\n" "Requires manual scene reload to take effect (right-click on 3D view → \"Reload All\")." msgstr "" "Modeliui pritaikomos glotnios normalės.\n" "\n" "Kad įsigaliotų, reikia rankiniu būdu iš naujo įkelti sceną (dešiniuoju pelės mygtuku spustelėkite 3D vaizde → „Įkelti viską iš naujo“)." msgid "Phong shading" msgstr "Phong šešėliavimas" msgid "Uses Phong shading inside realistic view." msgstr "Realistiniame vaizde naudojamas „Phong“ šešėliavimas." msgid "SSAO ambient occlusion" msgstr "SSAO apšvietimo užtemdymas" msgid "Applies SSAO in realistic view." msgstr "Realistiniame vaizde taiko SSAO." msgid "Shadows" msgstr "Šešėliai" # AI Translated msgid "Renders cast shadows on the plate, other objects, and each object onto itself in realistic view." msgstr "Realistiškame vaizde atvaizduoja metamus šešėlius ant pagrindo, kitų objektų ir kiekvieno objekto ant savęs paties." msgid "Anti-aliasing" msgstr "Išlyginimas" msgid "MSAA Multiplier" msgstr "MSAA daugiklis" msgid "" "Set the Multi-Sample Anti-Aliasing level.\n" "Higher values result in smoother edges, but the impact on performance is exponential.\n" "Lower values improve performance, at the cost of jagged edges.\n" "If disabled, its recommended to enable FXAA to reduce jagged edges with minimal performance impact.\n" "\n" "Requires application restart." msgstr "" "Nustatykite daugkartinio mėginių ėmimo išlyginimo lygį.\n" "Didesnės reikšmės užtikrina sklandesnius kraštus, tačiau poveikis našumui yra eksponentinis.\n" "Mažesnės reikšmės pagerina našumą, tačiau kraštai tampa dantyti.\n" "Jei ši funkcija išjungta, rekomenduojama įjungti FXAA, kad sumažintumėte dantytus kraštus, minimaliai paveikiant našumą.\n" "\n" "Reikia iš naujo paleisti programą." msgid "Disabled" msgstr "Išjungta" msgid "FXAA post-processing" msgstr "FXAA apdorojimas po atvaizdavimo" msgid "" "Applies Fast Approximate Anti-Aliasing as a screen-space pass.\n" "Useful for disabling or reducing the MSAA setting to improve performance.\n" "\n" "Takes effect immediately." msgstr "" "Taiko greitą apytikslį išlyginimą (Fast Approximate Anti-Aliasing) kaip ekrano erdvės apdorojimo etapą.\n" "Naudinga, norint išjungti arba sumažinti MSAA nustatymą, siekiant pagerinti našumą.\n" "\n" "Įsigalioja iš karto." msgid "FPS" msgstr "KPS (FPS)" msgid "FPS cap" msgstr "KPS ribojimas" msgid "(0 = unlimited)" msgstr "(0 = neribojama)" msgid "" "Limits viewport frame rate to reduce GPU load and power usage.\n" "Set to 0 for unlimited frame rate." msgstr "Riboja vaizdo srities kadrų dažnį, kad sumažintų vaizdo plokštės (GPU) apkrovą ir energijos sąnaudas. Įveskite 0, jei kadrų dažnis neribojamas." msgid "Show FPS overlay" msgstr "Rodyti KPS (FPS) indikatorių" msgid "Displays current viewport FPS in the top-right corner." msgstr "Viršutiniame dešiniajame kampe rodo esamą vaizdo srities kadrų dažnį." # AI Translated msgid "G-code Preview" msgstr "G-code peržiūra" # AI Translated msgid "Dim lower layers" msgstr "Pritemdyti apatinius sluoksnius" # AI Translated msgid "When scrubbing the layer slider in the sliced preview, render the layers below the current one darkened so that only the layer being viewed is shown at full brightness." msgstr "Slenkant sluoksnių slankiklį pjaustytoje peržiūroje, atvaizduoti žemiau esančius sluoksnius pritemdytus, kad visu ryškumu būtų rodomas tik peržiūrimas sluoksnis." # AI Translated msgid "Dimmed layer brightness" msgstr "Pritemdytų sluoksnių ryškumas" msgid "%" msgstr "%" # AI Translated msgid "" "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n" "99% is barely darkened, 0% renders them black. Capped at 99% because 100% would be the same as disabling the option." msgstr "" "Kaip ryškiai atvaizduojami pritemdyti sluoksniai, kai įjungta parinktis „Pritemdyti apatinius sluoksnius“.\n" "99 % – pritemdymas vos pastebimas, 0 % – sluoksniai atvaizduojami juodai. Riba yra 99 %, nes 100 % prilygtų parinkties išjungimui." msgid "Login region" msgstr "Prisijungimo regionas" msgid "Stealth mode" msgstr "Slaptas režimas" msgid "" "This disables all cloud features, including Orca Cloud profile syncing. Users who prefer to work entirely offline can enable this option.\n" "Note: When Stealth Mode is enabled, your user profiles will not be backed up to Orca Cloud." msgstr "" "Išjungia visas debesijos funkcijas, įskaitant „Orca Cloud“ profilių sinchronizavimą. Naudotojai, kurie nori dirbti visiškai neprisijungę prie tinklo, gali įjungti šią parinktį.\n" "Pastaba: kai įjungtas slaptas režimas, jūsų naudotojo profilių atsarginės kopijos nebus kuriamos „Orca Cloud“ debesyje." msgid "Hide login side panel" msgstr "Slėpti prisijungimo šoninį skydelį" msgid "Hide the login side panel on the home page." msgstr "Slėpti prisijungimo šoninį skydelį pradžios puslapyje." msgid "Network test" msgstr "Tinklo testas" msgid "Test" msgstr "Testas" msgid "Cloud Providers" msgstr "Debesijos paslaugų teikėjai" msgid "Enable Bambu Cloud" msgstr "Įjungti „Bambu Cloud“" msgid "Allow logging into Bambu Cloud alongside Orca Cloud. When enabled, a Bambu login section appears on the homepage." msgstr "Leisti prisijungti prie „Bambu Cloud“ kartu su „Orca Cloud“. Kai įjungta, pradžios puslapyje rodoma „Bambu“ prisijungimo skiltis." msgid "Update & sync" msgstr "Atnaujinimas ir sinchronizavimas" msgid "Check for stable updates only" msgstr "Tikrinti tik stabilius atnaujinimus" msgid "Auto sync user presets (Printer/Filament/Process)" msgstr "Automatiškai sinchronizuoti naudotojo profilius (spausdintuvas / gija / procesas)" msgid "Filament sync mode" msgstr "Gijų sinchronizavimo režimas" msgid "Choose whether sync updates both filament preset and color, or only color." msgstr "Pasirinkite, ar sinchronizuojant atnaujinti ir gijos profilį, ir spalvą, ar tik spalvą." msgid "Filament & Color" msgstr "Gija ir spalva" msgid "Color only" msgstr "Tik spalva" msgid "Update built-in presets automatically." msgstr "Automatiškai atnaujinti gamyklinius (įmontuotus) profilius." msgid "Use encrypted file for token storage" msgstr "Naudoti šifruotą failą prieigos raktų laikmenai" msgid "Store authentication tokens in an encrypted file instead of the system keychain. (Requires restart)" msgstr "Saugoti autentifikavimo raktus šifruotame faile, o ne sistemos slaptažodžių saugykloje (keychain). (Reikia paleisti iš naujo)" msgid "Bambu network plug-in" msgstr "„Bambu“ tinklo papildinys" msgid "Enable Bambu network plug-in" msgstr "Įjungti „Bambu“ tinklo papildinį" msgid "Network plug-in version" msgstr "Tinklo įskiepio versija" msgid "Select the network plug-in version to use" msgstr "Pasirinkite naudotiną tinklo įskiepio versiją" msgid "Associate files to OrcaSlicer" msgstr "Susieti failus su Orca Slicer" msgid "File associations for the Microsoft Store version are managed by Windows Settings." msgstr "„Microsoft Store“ versijos failų susiejimai valdomi „Windows“ nustatymuose." msgid "Open Windows Default Apps Settings" msgstr "Atidaryti „Windows“ numatytųjų programų nustatymus" msgid "Associate 3MF files to OrcaSlicer" msgstr "Susieti 3MF failus su „OrcaSlicer“" msgid "If enabled, this sets OrcaSlicer as the default application to open 3MF files." msgstr "Jei įjungta, „OrcaSlicer“ nustatoma kaip numatytoji programa 3MF failams atidaryti." msgid "Associate DRC files to OrcaSlicer" msgstr "Susieti DRC failus su „OrcaSlicer“" msgid "If enabled, sets OrcaSlicer as default application to open DRC files." msgstr "Jei įjungta, „OrcaSlicer“ nustatoma kaip numatytoji programa DRC failams atidaryti." msgid "Associate STL files to OrcaSlicer" msgstr "Susieti STL failus su „OrcaSlicer“" msgid "If enabled, this sets OrcaSlicer as the default application to open STL files." msgstr "Jei įjungta, „OrcaSlicer“ nustatoma kaip numatytoji programa STL failams atidaryti." msgid "Associate STEP files to OrcaSlicer" msgstr "Susieti STEP failus su „OrcaSlicer“" msgid "If enabled, this sets OrcaSlicer as the default application to open STEP files." msgstr "Jei įjungta, „OrcaSlicer“ nustatoma kaip numatytoji programa STEP failams atidaryti." msgid "Associate web links to OrcaSlicer" msgstr "Susieti interneto nuorodas su Orca Slicer" msgid "Developer" msgstr "Kūrėjas" msgid "Skip AMS blacklist check" msgstr "Praleisti AMS draudžiamo sąrašo tikrinimą" msgid "Show unsupported presets" msgstr "Rodyti nepalaikomus profilius" msgid "Show incompatible/unsupported presets in the printer and filament dropdown lists. These presets cannot be selected." msgstr "Rodyti nesuderinamus / nepalaikomus profilius spausdintuvų ir gijų išskleidžiamuosiuose sąrašuose. Šių profilių pasirinkti negalima." msgid "Experimental Features" msgstr "Eksperimentinis" msgid "Keep painted feature after mesh change" msgstr "Išsaugoti nudažytas ypatybes pakeitus tinklelio modelį" msgid "" "Attempt to keep painted features (color/seam/support/fuzzy etc.) after changing the object mesh (such as cut/reload from disk/simplify/fix etc.)\n" "Highly experimental! Slow and may create artifact." msgstr "" "Bando išsaugoti nudažytas ypatybes (spalvą, siūlę, atramas, šiauštą paviršių ir kt.) pakeitus objekto tinklelio modelį (pvz., po pjovimo, įkėlimo iš naujo, supaprastinimo, taisymo ir kt.)\n" "Labai eksperimentinė funkcija! Veikia lėtai ir gali sukurti artefaktų." msgid "Allow Abnormal Storage" msgstr "Leisti sutrikusią (neįprastą) laikmeną" msgid "" "This allows the use of Storage that is marked as abnormal by the Printer.\n" "Use at your own risk, can cause issues!" msgstr "" "Leidžia naudoti laikmeną, kurią spausdintuvas pažymėjo kaip veikiančią su sutrikimais.\n" "Naudokite savo rizika, tai gali sukelti problemų!" msgid "Log Level" msgstr "Žurnalų lygmuo" msgid "fatal" msgstr "kritinė" msgid "error" msgstr "klaida" msgid "warning" msgstr "perspėjimas" msgid "debug" msgstr "testavimas" msgid "trace" msgstr "sekimas" msgid "Debug" msgstr "Derinimas" msgid "Sync settings" msgstr "Sinchronizavimo nustatymai" msgid "User sync" msgstr "Naudotojo sinchronizavimas" msgid "Preset sync" msgstr "Profilių sinchronizavimas" msgid "Preferences sync" msgstr "Pasirinkimų sinchronizavimas" msgid "Enable SSL(MQTT)" msgstr "Įjungti SSL (MQTT)" msgid "Enable SSL(FTP)" msgstr "Įjungti SSL (FTP)" msgid "Internal developer mode" msgstr "Vidinio kūrėjo režimas" msgid "Host Setting" msgstr "Serverio nustatymai" msgid "DEV host: api-dev.bambu-lab.com/v1" msgstr "DEV serveris: api-dev.bambu-lab.com/v1" msgid "QA host: api-qa.bambu-lab.com/v1" msgstr "QA serveris: api-qa.bambu-lab.com/v1" msgid "PRE host: api-pre.bambu-lab.com/v1" msgstr "PRE serveris: api-pre.bambu-lab.com/v1" msgid "Product host" msgstr "Gamybinis serveris" msgid "Debug save button" msgstr "Derinimo išsaugojimo mygtukas" msgid "Save debug settings" msgstr "Išsaugoti testavimo nuostatas" msgid "Debug settings have been saved successfully!" msgstr "Testavimo nuostatos sėkmingai išsaugotos!" msgid "Cloud environment switched; please login again!" msgstr "Pakeista debesų aplinka, prašome prisijungti iš naujo!" msgid "System presets" msgstr "Sistemos profiliai" msgid "User presets" msgstr "Naudotojo profiliai" msgid "Incompatible presets" msgstr "Nesuderinami profiliai" msgid "My Printer" msgstr "Mano spausdintuvas" msgid "AMS filaments" msgstr "AMS gijos" msgid "Left filaments" msgstr "Kairiosios gijos" msgid "AMS filament" msgstr "AMS gija" msgid "Right filaments" msgstr "Dešiniosios gijos" msgid "Click to select filament color" msgstr "Paspauskite gijos spalvos pasirinkimui" msgid "Add/Remove presets" msgstr "Pridėti / pašalinti profilius" msgid "Edit preset" msgstr "Redaguoti profilį" # AI Translated msgid "Change extruder color" msgstr "Keisti ekstruderio spalvą" msgid "Unspecified" msgstr "Nenurodyta" msgid "Project-inside presets" msgstr "Vidiniai projekto profiliai" msgid "Bundle presets" msgstr "Paketo profiliai" msgid "System" msgstr "Sistema" msgid "Unsupported presets" msgstr "Nepalaikomi profiliai" msgid "Unsupported" msgstr "Nepalaikoma" msgid "Add/Remove filament" msgstr "Pridėti / pašalinti gijas" msgid "Add/Remove materials" msgstr "Pridėti / pašalinti medžiagas" msgid "Select/Remove printers (system presets)" msgstr "Pasirinkti / pašalinti spausdintuvus (sistemos profiliai)" msgid "Create printer" msgstr "Sukurti spausdintuvą" msgid "Incompatible" msgstr "Nesuderinama" msgid "The selected preset is null!" msgstr "Pasirinktas profilis yra tuščias (null)!" # AI Translated msgctxt "Layer range" msgid "End" msgstr "Pabaiga" msgid "Customize" msgstr "Pritaikyti" msgid "Other layer filament sequence" msgstr "Kita sluoksnio gijos seka" msgid "Please input layer value (>= 2)." msgstr "Prašome įvesti sluoksnių skaičių (>=2)." msgid "Plate name" msgstr "Spausdinimo pagrindo pavadinimas" msgid "Same as Global Plate Type" msgstr "Toks pats, kaip ir bendras pagrindo tipas" msgid "Bed type" msgstr "Pagrindo tipas" msgid "Same as Global Print Sequence" msgstr "Tokia pati, kaip ir bendra spausdinimo eiga" msgid "Print sequence" msgstr "Spausdinimo eiga" msgid "Same as Global" msgstr "Kaip ir bendra" msgid "Disable" msgstr "Išjungti" msgid "Spiral vase" msgstr "Spiralinė vaza" msgid "First layer filament sequence" msgstr "Pirmojo sluoksnio gijos eiga" msgid "By Layer" msgstr "Pagal sluoksnį" msgid "By Object" msgstr "Pagal objektą" msgid "Accept" msgstr "Priimti" msgid "Log Out" msgstr "Atsijungti" msgid "Slice all plates to obtain time and filament estimation" msgstr "Laiko ir gijos sąnaudoms sužinoti susluoksniuokite visą plokštę" msgid "Packing project data into 3MF file" msgstr "Projekto duomenys pakuojami į 3MF failą" msgid "Uploading 3MF" msgstr "Įkeliamas 3MF" msgid "Jump to model publish web page" msgstr "Pereiti į modelio talpinimo interneto puslapį" msgid "Note: The preparation may take several minutes. Please be patient." msgstr "Pastaba: paruošimas gali užtrukti kelias minutes. Būkite kantrūs." msgid "Publish" msgstr "Talpinti" msgid "Publish was canceled" msgstr "Publikavimas buvo atšauktas" msgid "Slicing Plate 1" msgstr "Sluoksniuojamas 1 pagrindas" msgid "Packing data to 3MF" msgstr "Duomenys pakuojami į 3MF" msgid "Uploading data" msgstr "Įkeliami duomenys" msgid "Jump to webpage" msgstr "Pereiti į interneto puslapį" #, c-format, boost-format msgid "Save %s as" msgstr "Išsaugoti %s kaip" msgid "User Preset" msgstr "Naudotojo profilis" msgid "Preset Inside Project" msgstr "Profilis projekto viduje" msgid "Detach from parent" msgstr "Atskirti nuo tėvinio profilio" msgid "Name is unavailable." msgstr "Nėra pavadinimo." msgid "Overwriting a system profile is not allowed." msgstr "Sistemos profilio perrašyti neleidžiama." #, boost-format msgid "Preset \"%1%\" already exists." msgstr "Profilis „%1%“ jau egzistuoja." #, boost-format msgid "Preset \"%1%\" already exists and is incompatible with the current printer." msgstr "Profilis „%1%“ jau egzistuoja ir yra nesuderinamas su dabartiniu spausdintuvu." msgid "Please note that saving will overwrite the current preset." msgstr "Atkreipkite dėmesį, kad išsaugojus bus perrašytas šis profilis." msgid "The name cannot be the same as a preset alias name." msgstr "Pavadinimas negali sutapti su profilio alternatyviuoju pavadinimu (alias)." msgid "Save preset" msgstr "Išsaugoti profilį" msgctxt "PresetName" msgid "Copy" msgstr "Kopijuoti" #, boost-format msgid "Printer \"%1%\" is selected with preset \"%2%\"" msgstr "Spausdintuvas „%1%“ pasirinktas su profiliu „%2%“" #, boost-format msgid "Please choose an action with \"%1%\" preset after saving." msgstr "Po išsaugojimo pasirinkite veiksmą su profiliu „%1%“." #, boost-format msgid "For \"%1%\", change \"%2%\" to \"%3%\" " msgstr "Profilio „%1%“ atveju, pakeisti „%2%“ į „%3%“ " #, boost-format msgid "For \"%1%\", add \"%2%\" as a new preset" msgstr "Profilio „%1%“ atveju, pridėti „%2%“ kaip naują profilį" #, boost-format msgid "Simply switch to \"%1%\"" msgstr "Paprasčiausiai persijunkite į \"%1%\"" msgid "Task canceled" msgstr "Užduotis atšaukta" msgid "Bambu Cool Plate" msgstr "„Bambu Cool“ pagrindas" msgid "PLA Plate" msgstr "PLA pagrindas" msgid "Bambu Engineering Plate" msgstr "„Bambu“ inžinerinis pagrindas" msgid "Bambu Smooth PEI Plate" msgstr "„Bambu“ lygus PEI pagrindas" msgid "High temperature Plate" msgstr "Aukštos temperatūros pagrindas" msgid "Bambu Textured PEI Plate" msgstr "„Bambu“ tekstūrinis PEI pagrindas" msgid "Bambu Cool Plate SuperTack" msgstr "„Bambu Cool SuperTack“ pagrindas" msgid "Send print job" msgstr "Siųsti spausdinimo užduotį" msgid "Not satisfied with the grouping of filaments? Regroup and slice ->" msgstr "Netenkina gijų grupavimas? Pergrupuokite ir sluoksniuokite ->" msgid "Manually change external spool during printing for multi-color printing" msgstr "Spausdinimo metu rankiniu būdu pakeiskite išorinę ritę, kad galėtumėte spausdinti keliomis spalvomis" msgid "Multi-color with external" msgstr "Daugiaspalvis spausdinimas su išorine rite" msgid "Your filament grouping method in the sliced file is not optimal." msgstr "Jūsų pasirinktas gijų grupavimo būdas susluoksniuotame faile nėra optimalus." # AI Translated msgid "To ensure print quality, the drying temperature will be lowered during printing." msgstr "Siekiant užtikrinti spausdinimo kokybę, džiovinimo temperatūra spausdinimo metu bus sumažinta." # AI Translated msgid "Select timelapse storage location" msgstr "Pasirinkite intervalinio fotografavimo saugojimo vietą" msgid "Auto Bed Leveling" msgstr "Automatinis pagrindo lygiavimas" msgid "" "This checks the flatness of heatbed. Leveling makes extruded height uniform.\n" "*Automatic mode: Run a leveling check(about 10 seconds). Skip if surface is fine." msgstr "" "Patikrina šildomo pagrindo lygumą. Lygiavimas užtikrina tolygų išspaustos gijos aukštį.\n" "*Automatinis režimas: atlieka lygiavimo patikrą (apie 10 sekundžių). Praleidžiama, jei paviršius yra lygus." msgid "Flow Dynamics Calibration" msgstr "Gijos srauto kalibravimas" msgid "" "This process determines the dynamic flow values to improve overall print quality.\n" "*Automatic mode: Skip if the filament was calibrated recently." msgstr "" "Šis procesas nustato dinaminio srauto vertes, kad pagerintų bendrą spausdinimo kokybę.\n" "*Automatinis režimas: praleidžiama, jei gija buvo sukalibruota neseniai." msgid "Nozzle Offset Calibration" msgstr "Purkštuko poslinkio (offset) kalibravimas" msgid "" "Calibrate nozzle offsets to enhance print quality.\n" "*Automatic mode: Check for calibration before printing. Skip if unnecessary." msgstr "" "Kalibruoja purkštuko poslinkius spausdinimo kokybei pagerinti.\n" "*Automatinis režimas: patikrina kalibravimą prieš spausdinant. Praleidžiama, jei tai nebūtina." # AI Translated msgid "Shared PA Profile" msgstr "Bendrinamas PA profilis" # AI Translated msgid "Nozzles and filaments of the same type share the same PA profile." msgstr "Tokio pat tipo purkštukai ir gijos naudoja tą patį PA profilį." msgid "Send complete" msgstr "Siuntimas baigtas" msgid "Error code" msgstr "Klaidos kodas" msgid "Error desc" msgstr "Klaidos aprašymas" msgid "Extra info" msgstr "Papildoma informacija" # AI Translated msgid "The Filament Track Switch installed on the printer does not match the slicing file. Please re-slice to avoid print quality issues." msgstr "Spausdintuve įdiegtas Filament Track Switch neatitinka pjaustymo failo. Iš naujo supjaustykite, kad išvengtumėte spausdinimo kokybės problemų." # AI Translated msgid "This print requires a Filament Track Switch. Please install it first." msgstr "Šiam spausdinimui reikalingas Filament Track Switch. Pirmiausia jį įdiekite." # AI Translated msgid "The Filament Track Switch has not been setup. Please setup it first." msgstr "Filament Track Switch nebuvo nustatytas. Pirmiausia jį nustatykite." # AI Translated #, c-format, boost-format msgid "Failed to send nozzle auto-mapping request to printer { code: %d }. Please try to refresh the printer information. If it still does not recover, you can try to rebind the printer and check the network connection." msgstr "Nepavyko išsiųsti purkštuko automatinio priskyrimo užklausos spausdintuvui { code: %d }. Pabandykite atnaujinti spausdintuvo informaciją. Jei problema išlieka, galite pabandyti iš naujo susieti spausdintuvą ir patikrinti tinklo ryšį." # AI Translated msgid "The printer is calculating nozzle mapping." msgstr "Spausdintuvas skaičiuoja purkštukų priskyrimą." # AI Translated msgid "Please wait a moment..." msgstr "Palaukite akimirką..." # AI Translated #, c-format, boost-format msgid "Failed to receive nozzle auto-mapping table from printer { msg: %s }. Please refresh the printer information." msgstr "Nepavyko gauti purkštuko automatinio priskyrimo lentelės iš spausdintuvo { msg: %s }. Atnaujinkite spausdintuvo informaciją." # AI Translated #, c-format, boost-format msgid "The printer failed to build the nozzle auto-mapping table { code: %d }. Please refresh nozzle information." msgstr "Spausdintuvui nepavyko sudaryti purkštuko automatinio priskyrimo lentelės { code: %d }. Atnaujinkite purkštuko informaciją." # AI Translated #, c-format, boost-format msgid "The current nozzle mapping may produce an extra %0.2f g of waste." msgstr "Dabartinis purkštukų priskyrimas gali sukelti papildomai %0.2f g atliekų." # AI Translated #, c-format, boost-format msgid "Recommended filament arrangement saves %s->" msgstr "Rekomenduojamas gijų išdėstymas taupo %s->" #, c-format, boost-format msgid "Filament %s does not match the filament in AMS slot %s. Please update the printer firmware to support AMS slot assignment." msgstr "Naudojama gija %s nesutampa su gija AMS lizde %s. Atnaujinkite spausdintuvo programinę įrangą, kad galėtumėte priskirti lizdus AMS." msgid "Filament does not match the filament in AMS slot. Please update the printer firmware to support AMS slot assignment." msgstr "Naudojama gija nesutampa su gija AMS lizde. Atnaujinkite spausdintuvo programinę įrangą, kad galėtumėte priskirti lizdus AMS." #, c-format, boost-format msgid "The selected printer (%s) is incompatible with the print file configuration (%s). Please adjust the printer preset in the prepare page or choose a compatible printer on this page." msgstr "Pasirinktas spausdintuvas (%s) yra nesuderinamas su spausdinimo failo konfigūracija (%s). Paruošimo puslapyje pakoreguokite spausdintuvo profilį arba šiame puslapyje pasirinkite suderinamą spausdintuvą." msgid "When spiral vase mode is enabled, machines with I3 structure will not generate timelapse videos." msgstr "Įjungus spiralinės vazos režimą, I3 struktūros įrenginiai negeneruos laiko tarpų (timelapse) vaizdo įrašų." msgid "The current printer does not support timelapse in Traditional Mode when printing By-Object." msgstr "Dabartinis spausdintuvas nepalaiko laiko tarpų (timelapse) vaizdo įrašų tradiciniu režimu, kai spausdinama pagal objektą." # AI Translated msgid "I have checked the installed nozzle and want to print anyway." msgstr "Patikrinau įdiegtą purkštuką ir vis tiek noriu spausdinti." msgid "Errors" msgstr "Klaidos" msgid "More than one filament types have been mapped to the same external spool, which may cause printing issues. The printer won't pause during printing." msgstr "Prie tos pačios išorinės ritės buvo priskirti keli gijų tipai, o tai gali sukelti spausdinimo problemų. Spausdinimo metu spausdintuvas nedarys pauzės." msgid "The filament type setting of external spool is different from the filament in the slicing file." msgstr "Išorinės ritės gijos tipo nustatymas skiriasi nuo gijos, nurodytos sluoksniavimo faile." msgid "The printer type selected when generating G-code is not consistent with the currently selected printer. It is recommended that you use the same printer type for slicing." msgstr "Generuojant G-kodą pasirinktas spausdintuvo tipas nesutampa su šiuo metu pasirinktu spausdintuvu. Sluoksniavimui rekomenduojama naudoti tą patį spausdintuvo tipą." msgid "There are some unknown filaments in the AMS mappings. Please check whether they are the required filaments. If they are okay, click \"Confirm\" to start printing." msgstr "AMS sistemoje yra nežinomų gijų. Prašome patikrinti, ar tai yra reikalingos gijos. Jei viskas tvarkoje, spausdinimą galite pradėti paspaudę „Patvirtinti“." msgid "Please check the following:" msgstr "Prašome patikrinti:" msgid "Please fix the error above, otherwise printing cannot continue." msgstr "Prašome ištaisyti aukščiau pateiktą klaidą, priešingu atveju nebus galima pradėti spausdinimo." msgid "Please click the confirm button if you still want to proceed with printing." msgstr "Jei jūs vis dar norite tęsti spausdinimą, paspauskite patvirtinimo mygtuką." msgid "This checks the flatness of heatbed. Leveling makes extruded height uniform." msgstr "Patikrina spausdinimo pagrindo lygumą. Lygiavimas užtikrina tolygų išspaustos gijos aukštį." msgid "This process determines the dynamic flow values to improve overall print quality." msgstr "Šis procesas nustato dinaminio srauto vertes, kad pagerintų bendrą spausdinimo kokybę." msgid "Internal" msgstr "Vidinis" # AI Translated #, c-format, boost-format msgid "%s space less than 20MB. Timelapse may not save properly. You can turn it off or" msgstr "%s laisvos vietos mažiau nei 20 MB. Intervalinis fotografavimas gali neišsaugoti tinkamai. Galite jį išjungti arba" # AI Translated msgid "Clean up files" msgstr "Išvalyti failus" # AI Translated msgid "Low internal storage. This timelapse will overwrite the oldest video files." msgstr "Mažai vidinės atminties. Šis intervalinis fotografavimas perrašys seniausius vaizdo failus." # AI Translated msgid "Low external storage. This timelapse will overwrite the oldest video files." msgstr "Mažai išorinės atminties. Šis intervalinis fotografavimas perrašys seniausius vaizdo failus." # AI Translated msgid "Insufficient external storage for time-lapse photography. Connect to computer to delete files, or use a larger memory card." msgstr "Nepakanka išorinės atminties intervaliniam fotografavimui. Prijunkite prie kompiuterio failams ištrinti arba naudokite didesnę atminties kortelę." # AI Translated msgid "Storage Space Not Enough" msgstr "Nepakanka atminties vietos" # AI Translated msgid "Confirm & Print" msgstr "Patvirtinti ir spausdinti" # AI Translated msgid "Cancel Timelapse & Print" msgstr "Atšaukti intervalinį fotografavimą ir spausdinti" # AI Translated msgid "Clean Up" msgstr "Išvalyti" msgid "Preparing print job" msgstr "Spausdinimo užduoties rengimas" msgid "The name length exceeds the limit." msgstr "Pavadinimas viršijo leistiną dydį." #, c-format, boost-format msgid "Cost %dg filament and %d changes more than optimal grouping." msgstr "Sunaudoja %d g gijos ir %d pakeitimais daugiau nei pasirinkus optimalų grupavimą." msgid "nozzle" msgstr "purkštukas" # AI Translated #, c-format, boost-format msgid "Refreshing information of hotends(%d/%d)." msgstr "Atnaujinama kaitinimo blokų informacija (%d/%d)." # AI Translated msgid "There are not enough available hotends currently." msgstr "Šiuo metu nepakanka prieinamų kaitinimo blokų." # AI Translated msgid "Please complete the hotend rack setup and try again." msgstr "Užbaikite kaitinimo blokų stovo nustatymą ir bandykite dar kartą." # AI Translated msgid "Please refresh the nozzle information and try again." msgstr "Atnaujinkite purkštuko informaciją ir bandykite dar kartą." # AI Translated msgid "Please re-slice to avoid filament waste." msgstr "Iš naujo supjaustykite, kad išvengtumėte gijos švaistymo." # AI Translated msgid "The reported hotend information may be unreliable." msgstr "Praneštoji kaitinimo bloko informacija gali būti nepatikima." # AI Translated #, c-format, boost-format msgid "The printer has no nozzle matching the slicing file (%s)." msgstr "Spausdintuvas neturi purkštuko, atitinkančio pjaustymo failą (%s)." # AI Translated msgid "Please install a matching nozzle in the hotend rack, or set the corresponding printer preset while slicing." msgstr "Įdiekite atitinkantį purkštuką į kaitinimo blokų stovą arba pjaustymo metu nustatykite atitinkamą spausdintuvo profilį." # AI Translated msgid "The toolhead and hotend rack are full. Please remove at least one hotend before printing." msgstr "Spausdinimo galvutė ir kaitinimo blokų stovas užpildyti. Prieš spausdindami pašalinkite bent vieną kaitinimo bloką." #, c-format, boost-format msgid "The nozzle flow setting of %s(%s) doesn't match with the slicing file(%s). Please make sure the nozzle installed matches with settings in printer, then set the corresponding printer preset while slicing." msgstr "%s (%s) purkštuko srauto nustatymas nesutampa su sluoksniavimo failu (%s). Įsitikinkite, kad įstatytas purkštukas atitinka spausdintuvo nustatymus, o tada sluoksniuodami pasirinkite atitinkamą spausdintuvo profilį." msgid "Tips: If you changed your nozzle of your printer lately, please go to 'Device -> Printer parts' to change your nozzle setting." msgstr "Patarimas: jei neseniai pakeitėte spausdintuvo purkštuką, eikite į „Įrenginys -> Spausdintuvo dalys“, kad pakeistumėte purkštuko nustatymą." #, c-format, boost-format msgid "The %s diameter(%.1fmm) of current printer doesn't match with the slicing file (%.1fmm). Please make sure the nozzle installed matches with settings in printer, then set the corresponding printer preset when slicing." msgstr "Dabartinio spausdintuvo %s skersmuo (%.1f mm) nesutampa su sluoksniavimo failu (%.1f mm). Įsitikinkite, kad įstatytas purkštukas atitinka spausdintuvo nustatymus, o tada sluoksniuodami parinkite atitinkamą spausdintuvo profilį." #, c-format, boost-format msgid "The current nozzle diameter (%.1fmm) doesn't match with the slicing file (%.1fmm). Please make sure the nozzle installed matches with settings in printer, then set the corresponding printer preset when slicing." msgstr "Dabartinis purkštuko skersmuo (%.1f mm) nesutampa su sluoksniavimo failu (%.1f mm). Įsitikinkite, kad įstatytas purkštukas atitinka spausdintuvo nustatymus, o tada sluoksniuodami parinkite atitinkamą spausdintuvo profilį." msgid "both extruders" msgstr "abu ekstruderiai" #, c-format, boost-format msgid "The hardness of current material (%s) exceeds the hardness of %s(%s). Please verify the nozzle or material settings and try again." msgstr "Dabartinės medžiagos kietumas (%s) viršija %s (%s) kietumą. Patikrinkite purkštuko arba medžiagos nustatymus ir bandykite dar kartą." # AI Translated msgid "Your current firmware version cannot start this print job. Please update to the latest version and try again." msgstr "Dabartinė programinės įrangos versija negali pradėti šios spausdinimo užduoties. Atnaujinkite į naujausią versiją ir bandykite dar kartą." # AI Translated #, c-format, boost-format msgid "The hardness of current material (%s) exceeds the hardness of %s(%s). It may cause nozzle wear, leading to material leakage and unstable flow. Please exercise caution when using it." msgstr "Dabartinės medžiagos (%s) kietumas viršija %s (%s) kietumą. Tai gali sukelti purkštuko nusidėvėjimą, medžiagos nutekėjimą ir nestabilų srautą. Naudokite atsargiai." # AI Translated msgid "Some filaments may switch between extruders during printing. Manual K-value calibration cannot be applied throughout the entire print, which may affect print quality. Enabling Flow Dynamics Calibration is recommended." msgstr "Kai kurios gijos spausdinimo metu gali persijungti tarp ekstruderių. Rankinis K reikšmės kalibravimas negali būti taikomas visą spausdinimo laiką, o tai gali paveikti spausdinimo kokybę. Rekomenduojama įjungti dinaminio srauto kalibravimą." # AI Translated msgid "There is stringing-prone filament in this file. For best print quality, we recommend switching nozzle clumping detection to Auto mode." msgstr "Šiame faile yra prie siūlų linkusios gijos. Geriausiai spausdinimo kokybei rekomenduojame perjungti purkštuko apsivėlimo aptikimą į automatinį režimą." # AI Translated msgid "If 'Dynamic Flow Calibration' is set to Auto/On, the system will use the manual calibration value or the default value and skip the flow calibration process. You can perform a manual flow calibration for TPU filament on the 'Calibration' page." msgstr "Jei „Dinaminis srauto kalibravimas“ nustatytas į automatinį/įjungtą, sistema naudos rankinio kalibravimo reikšmę arba numatytąją reikšmę ir praleis srauto kalibravimo procesą. TPU gijos rankinį srauto kalibravimą galite atlikti puslapyje „Kalibravimas“." #, c-format, boost-format msgid "[ %s ] requires printing in a high-temperature environment. Please close the door." msgstr "[ %s ] reikalauja spausdinimo aukštos temperatūros aplinkoje. Užverkite dureles." #, c-format, boost-format msgid "[ %s ] requires printing in a high-temperature environment." msgstr "[ %s ] reikalauja spausdinimo aukštos temperatūros aplinkoje." #, c-format, boost-format msgid "The filament on %s may soften. Please unload." msgstr "Gija, esanti %s, gali suminkštėti. Prašome ją išimti." #, c-format, boost-format msgid "The filament on %s is unknown and may soften. Please set filament." msgstr "Gija, esanti %s, yra nežinoma ir gali suminkštėti. Nustatykite gijos tipą." msgid "Unable to automatically match to suitable filament. Please click to manually match." msgstr "Nepavyko automatiškai parinkti tinkamos gijos. Spustelėkite, kad suderintumėte rankiniu būdu." msgid "Install toolhead enhanced cooling fan to prevent filament softening." msgstr "Įdiekite patobulintą spausdinimo galvutės (toolhead) aušinimo ventiliatorių, kad išvengtumėte gijos suminkštėjimo." msgid "Smooth Cool Plate" msgstr "Lygus vėsus pagrindas" msgid "Engineering Plate" msgstr "Inžinerinis pagrindas" msgid "Smooth High Temp Plate" msgstr "Lygus aukštos temperatūros pagrindas" msgid "Textured PEI Plate" msgstr "Tekstūrinis PEI pagrindas" msgid "Cool Plate (SuperTack)" msgstr "Vėsus pagrindas („SuperTack“)" msgid "Click here if you can't connect to the printer" msgstr "Jei negalite prijungti spausdintuvo, spauskite čia" msgid "No login account, only printers in LAN mode are displayed." msgstr "Nėra prisijungimo paskyros, rodomi tik vietiniame tinkle esantys spausdintuvai." msgid "Connecting to server..." msgstr "Jungiamasi prie serverio..." msgid "Synchronizing device information..." msgstr "Sinchronizuojama įrenginio informacija..." msgid "Synchronizing device information timed out." msgstr "Baigėsi įrenginio informacijos sinchronizavimo laikas." msgid "Cannot send a print job when the printer is not at FDM mode." msgstr "Negalima siųsti spausdinimo užduoties, kai spausdintuvas neveikia FDM režimu." msgid "Cannot send a print job while the printer is updating firmware." msgstr "Spausdinimo užduoties negalima išsiųsti spausdintuvo programinės įrangos atnaujinamo metu." msgid "The printer is executing instructions. Please restart printing after it ends." msgstr "Spausdintuvas vykdo instrukcijas. Kai jis baigs, prašome paleisti spausdinimą iš naujo." msgid "AMS is setting up. Please try again later." msgstr "Ruošiama AMS sistema. Bandykite dar kartą vėliau." msgid "Not all filaments used in slicing are mapped to the printer. Please check the mapping of filaments." msgstr "Ne visos sluoksniavimui naudotos gijos yra priskirtos spausdintuvui. Patikrinkite gijų priskyrimą (mapping)." msgid "Please do not mix-use the Ext with AMS." msgstr "Nenaudokite išorinės ritės (Ext) kartu su AMS sistema vienu metu." msgid "Invalid nozzle information, please refresh or manually set nozzle information." msgstr "Neteisinga purkštuko informacija. Atnaujinkite arba rankiniu būdu nustatykite purkštuko duomenis." msgid "Storage needs to be inserted before printing via LAN." msgstr "Prieš spausdinant per vietinį tinklą (LAN), būtina įdėti laikmeną." msgid "Storage is in abnormal state or is in read-only mode." msgstr "Laikmena veikia su sutrikimais arba yra tik skaitymo režime." msgid "Storage needs to be inserted before printing." msgstr "Prieš spausdinant būtina įdėti laikmeną." msgid "Cannot send the print job to a printer whose firmware must be updated." msgstr "Neįmanoma išsiųsti spausdinimo užduoties spausdintuvui, kurio aparatinę programinę įrangą (firmware) reikia atnaujinti." msgid "Cannot send a print job for an empty plate." msgstr "Negalima siųsti spausdinimo užduoties tuščiam pagrindui." msgid "Storage needs to be inserted to record timelapse." msgstr "Norint įrašyti laiko tarpų (timelapse) vaizdo įrašą, būtina įdėti laikmeną." msgid "You have selected both external and AMS filaments for an extruder. You will need to manually switch the external filament during printing." msgstr "Ekstruderiui pasirinkote ir išorines, ir AMS gijas. Spausdinimo metu turėsite rankiniu būdu pakeisti išorinę giją." msgid "TPU 90A/TPU 85A is too soft and does not support automatic Flow Dynamics calibration." msgstr "TPU 90A / TPU 85A yra per minkšta gija, todėl ji nepalaiko automatinio dinaminio srauto kalibravimo." msgid "Set dynamic flow calibration to 'OFF' to enable custom dynamic flow value." msgstr "Išjunkite dinaminio srauto kalibravimą (nustatykite į „OFF“), kad galėtumėte naudoti pasirinktinę dinaminio srauto vertę." msgid "This printer does not support printing all plates." msgstr "Šis spausdintuvas nepalaiko visų pagrindų spausdinimo iš karto." # AI Translated #, c-format, boost-format msgid "The current firmware supports a maximum of %s materials. You can either reduce the number of materials to %s or fewer on the Preparation Page, or try updating the firmware. If you are still restricted after the update, please wait for subsequent firmware support." msgstr "Dabartinė programinė įranga palaiko daugiausiai %s medžiagų. Paruošimo puslapyje galite sumažinti medžiagų skaičių iki %s ar mažiau arba pabandyti atnaujinti programinę įrangą. Jei ir po atnaujinimo apribojimas išlieka, palaukite tolesnio programinės įrangos palaikymo." msgid "The type of external filament is unknown or does not match with the filament type in the slicing file. Please make sure you have installed the correct filament in the external spool." msgstr "Išorinės gijos tipas yra nežinomas arba nesutampa su gijos tipu sluoksniavimo faile. Įsitikinkite, kad į išorinę ritę įstatėte tinkamą giją." # AI Translated msgid "TPU 90A/TPU 85A are too soft. It is recommended to perform manual flow calibration on the 'Calibration' page. If 'Dynamic Flow Calibration' is set to auto/on, the system will use the previous calibration value and skip the flow calibration process." msgstr "TPU 90A / TPU 85A yra pernelyg minkšti. Rekomenduojama atlikti rankinį srauto kalibravimą puslapyje „Kalibravimas“. Jei „Dinaminis srauto kalibravimas“ nustatytas į automatinį/įjungtą, sistema naudos ankstesnę kalibravimo reikšmę ir praleis srauto kalibravimo procesą." # AI Translated msgid "The filament in the AMS may be insufficient for this print. Please refill or replace it." msgstr "AMS esančios gijos gali nepakakti šiam spausdinimui. Papildykite arba pakeiskite ją." msgid "Current firmware does not support file transfer to internal storage." msgstr "Dabartinė programinė įranga nepalaiko failų perdavimo į vidinę laikmeną." msgid "Send to Printer storage" msgstr "Siųsti į spausdintuvo laikmeną" msgid "Try to connect" msgstr "Bandyti jungtis" msgid "Internal Storage" msgstr "Vidinė laikmena" msgid "External Storage" msgstr "Išorinė laikmena" msgid "Upload file timeout, please check if the firmware version supports it." msgstr "Baigėsi failo įkėlimo laikas, patikrinkite, ar programinės įrangos versija tai palaiko." msgid "Connection timed out, please check your network." msgstr "Ryšio laikas baigėsi, patikrinkite tinklo ryšį." msgid "Connection failed. Click the icon to retry" msgstr "Nepavyko prisijungti. Spustelėkite piktogramą, kad bandytumėte dar kartą" msgid "Cannot send print tasks when an update is in progress" msgstr "Negalima nusiųsti spausdinimo užduočių aparatinės programinės įrangos atnaujinimo metu" msgid "The selected printer is incompatible with the chosen printer presets." msgstr "Pasirinktas spausdintuvas yra nesuderinamas su parinktais spausdintuvo profiliais." msgid "Storage needs to be inserted before send to printer." msgstr "Prieš siunčiant į spausdintuvą, būtina įdėti laikmeną." msgid "The printer is required to be on the same LAN as Orca Slicer." msgstr "Spausdintuvas privalo būti tame pačiame vietiniame tinkle (LAN) kaip ir „OrcaSlicer“." msgid "The printer does not support sending to printer storage." msgstr "Spausdintuvas nepalaiko siuntimo į spausdintuvo laikmeną." msgid "Sending..." msgstr "Siunčiama..." msgid "File upload timed out. Please check if the firmware version supports this operation or verify if the printer is functioning properly." msgstr "Baigėsi failo įkėlimo laikas. Patikrinkite, ar programinės įrangos versija palaiko šį veiksmą, ir įsitikinkite, kad spausdintuvas veikia tinkamai." msgid "Sending failed, please try again!" msgstr "Siuntimas nepavyko, bandykite dar kartą!" msgid "Slice complete" msgstr "Sluoksniavimas baigtas" msgid "View all Daily tips" msgstr "Peržiūrėti visus dienos patarimus" msgid "Failed to create socket" msgstr "Nepavyko sukurti lizdo (socket)" msgid "Failed to connect socket" msgstr "Nepavyko prisijungti prie lizdo (socket)" msgid "Failed to publish login request" msgstr "Nepavyko paskelbti prisijungimo užklausos" msgid "Timeout getting ticket from device" msgstr "Įrenginio atsakymo laukimo laikas baigėsi." msgid "Timeout getting ticket from server" msgstr "Serverio atsakymo laukimo laikas baigėsi." msgid "Failed to post ticket to server" msgstr "Nepavyko paskelbti bilieto serveryje" msgid "Failed to parse login report reason" msgstr "Nepavyko išanalizuoti prisijungimo ataskaitos priežasties" msgid "Receive login report timeout" msgstr "Prisijungimo ataskaitos gavimo laikas baigėsi" msgid "Unknown Failure" msgstr "Nežinomas gedimas" msgid "" "Please Find the Pin Code in Account page on printer screen,\n" " and type in the Pin Code below." msgstr "" "Prašome rasti PIN kodą spausdintuvo ekrano paskyros puslapyje\n" "ir įveskite jį žemiau esančiame PIN kodo lauke." msgid "Can't find Pin Code?" msgstr "Nerandate PIN kodo?" msgid "Pin Code" msgstr "PIN kodas" msgid "Binding..." msgstr "Siejama..." msgid "Please confirm on the printer screen" msgstr "Prašome patvirtinti spausdintuvo ekrane" msgid "Log in failed. Please check the Pin Code." msgstr "Prisijungti nepavyko. Prašome patikrinti PIN kodą." msgid "Log in printer" msgstr "Prijungti spausdintuvą" msgid "Would you like to log in to this printer with the current account?" msgstr "Ar norite prisijungti prie šio spausdintuvo su šia paskyra?" msgid "Check the reason" msgstr "Patikrinti priežastį" msgid "Read and accept" msgstr "Perskaičiau ir sutinku" msgid "Terms and Conditions" msgstr "Naudojimo sąlygos" msgid "Thank you for purchasing a Bambu Lab device. Before using your Bambu Lab device, please read the terms and conditions. By clicking to agree to use your Bambu Lab device, you agree to abide by the Privacy Policy and Terms of Use (collectively, the \"Terms\"). If you do not comply with or agree to the Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services." msgstr "Dėkojame, kad įsigijote „Bambu Lab“ prietaisą. Prieš naudodamiesi „Bambu Lab“ prietaisu, perskaitykite taisykles ir sąlygas. Paspaudę sutikti naudoti „Bambu Lab“ įrenginį, sutinkate laikytis privatumo politikos ir naudojimo sąlygų (toliau kartu - sąlygos). Jei nesilaikote „Bambu Lab“ privatumo politikos arba nesutinkate su ja, nesinaudokite „Bambu Lab“ įranga ir paslaugomis." msgid "and" msgstr "ir" msgid "Privacy Policy" msgstr "Privatumo politika" msgid "We ask for your help to improve everyone's printer" msgstr "Mes prašome jūsų pagalbos tobulinant kiekvieno spausdintuvą" msgid "Statement about User Experience Improvement Program" msgstr "Informacija apie naudotojo patirties tobulinimo programą" #, c-format, boost-format msgid "In the 3D Printing community, we learn from each other's successes and failures to adjust our own slicing parameters and settings. %s follows the same principle and uses machine learning to improve its performance from the successes and failures of the vast number of prints by our users. We are training %s to be smarter by feeding them the real-world data. If you are willing, this service will access information from your error logs and usage logs, which may include information described in Privacy Policy. We will not collect any Personal Data by which an individual can be identified directly or indirectly, including without limitation names, addresses, payment information, or phone numbers. By enabling this service, you agree to these terms and the statement about Privacy Policy." msgstr "3D spausdinimo bendruomenėje mokomės vieni iš kitų sėkmių ir nesėkmių, kad galėtume koreguoti savo sluoksniavimo parametrus ir profilius. %s veikia tuo pačiu principu ir naudoja mašininį mokymąsi, kad pagerintų savo veikimą remdamasi didžiule mūsų naudotojų spausdinimo sėkme bei nesėkmėmis. Mes mokome %s tapti išmanesniu, pateikdami jam realaus pasaulio duomenis. Jei sutinkate, ši paslauga pasieks informaciją iš jūsų klaidų ir naudojimo žurnalų, kurie gali apimti informaciją, aprašytą Privatumo politikoje. Mes nerenkame jokių asmens duomenų, kuriais galima tiesiogiai ar netiesiogiai identifikuoti asmenį, įskaitant (be apribojimų) vardus, pavardes, adresus, mokėjimo informaciją ar telefono numerius. Įgalindami šią paslaugą, jūs sutinkate su šiomis sąlygomis ir Privatumo politikos nuostatomis." msgid "Statement on User Experience Improvement Plan" msgstr "Informacija apie naudotojo patirties tobulinimo planą" msgid "Log in successful." msgstr "Prisijungta sėkmingai." msgid "Log out printer" msgstr "Atjungti spausdintuvą" msgid "Would you like to log out the printer?" msgstr "Ar norite atjungti spausdintuvą?" msgid "Please log in first." msgstr "Prašome pirmiau prisijungti." msgid "There was a problem connecting to the printer. Please try again." msgstr "Nepavyko prijungti spausdintuvo. Prašome pabandyti vėliau." msgid "Failed to log out." msgstr "Nepavyko atsijungti." #. TRN "Save current Settings" #, c-format, boost-format msgid "Save current %s" msgstr "Išsaugoti dabartinį %s" msgid "Delete this preset" msgstr "Ištrinti šį profilį" msgid "Search in preset" msgstr "Ieškoti profilyje" msgid "Synchronization of different extruder drives or nozzle volume types is not supported." msgstr "Skirtingų ekstruderių pavarų arba purkštukų tūrio tipų sinchronizavimas nepalaikomas." msgid "Synchronize the modification of parameters to the corresponding parameters of another extruder." msgstr "Sinchronizuoti parametrų pakeitimus su atitinkamais kito ekstruderio parametrais." msgid "Click to reset all settings to the last saved preset." msgstr "Paspauskite, norėdami atkurti visus nustatymus pagal paskutinį išsaugotą profilį." # AI Translated msgid "Prime tower is required for nozzle changing. There may be flaws on the model without prime tower. Are you sure you want to disable prime tower?" msgstr "Valymo bokštas reikalingas keičiant purkštuką. Be valymo bokšto ant modelio gali atsirasti trūkumų. Ar tikrai norite išjungti valymo bokštą?" msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without a prime tower. Are you sure you want to disable the prime tower?" msgstr "Norint sklandžiai įrašyti laiko tarpų (timelapse) vaizdo įrašą, reikalingas valymo bokštas. Be valymo bokšto modelyje gali atsirasti defektų. Ar tikrai norite išjungti valymo bokštą?" msgid "A prime tower is required for clumping detection. There may be flaws on the model without prime tower. Are you sure you want to disable prime tower?" msgstr "Įjungus ir tikslų Z aukštį, ir valymo bokštą, gali kilti sluoksniavimo klaidų. Ar vis tiek norite įjungti?" msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable?" msgstr "Tikslaus Z aukščio ir pirminio bokšto įjungimas gali sukelti pjaustymo klaidų. Ar vis tiek norite įjungti?" msgid "A prime tower is required for clumping detection. There may be flaws on the model without prime tower. Do you still want to enable clumping detection?" msgstr "Norint aptikti gumbų susidarymą, reikalingas valymo bokštas. Be valymo bokšto modelyje gali atsirasti defektų. Ar vis tiek norite įjungti gumbų susidarymo aptikimą?" msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?" msgstr "Įjungus ir tikslų Z aukštį, ir valymo bokštą, gali kilti sluoksniavimo klaidų. Ar vis tiek norite įjungti tikslų Z aukštį?" msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?" msgstr "Norint sklandžiai įrašyti laiko tarpų (timelapse) vaizdo įrašą, reikalingas valymo bokštas. Be valymo bokšto modelyje gali atsirasti defektų. Ar norite įjungti valymo bokštą?" msgid "Still print by object?" msgstr "Vis dar spausdinti pagal objektą?" msgid "" "Non-soluble support materials are not recommended for support base.\n" "Are you sure to use them for support base?\n" msgstr "" "Netirpios atraminės medžiagos nerekomenduojamos atramų pagrindui.\n" "Ar tikrai norite jas naudoti atramų pagrindui?\n" msgid "" "When using support material for the support interface, we recommend the following settings:\n" "0 top Z distance, 0 interface spacing, interlaced rectilinear pattern and disable independent support layer height." msgstr "" "Naudojant specialią medžiagą atramų sąsajai (interface), rekomenduojame šiuos profilio nustatymus:\n" "0 viršutinį Z atstumą, 0 sąsajos tarpą, susipynusį tiesinį raštą (rectilinear) ir išjungti nepriklausomą atraminio sluoksnio aukštį." msgid "" "Change these settings automatically?\n" "Yes - Change these settings automatically.\n" "No - Do not change these settings for me." msgstr "" "Automatiškai pakeisti šiuos nustatymus?\n" "Taip - Pakeiskite šiuos nustatymus automatiškai.\n" "Ne - Nekeiskite šių nustatymų už mane." msgid "" "When using soluble material for the support interface, we recommend the following settings:\n" "0 top Z distance, 0 interface spacing, interlaced rectilinear pattern, disable independent support layer height\n" "and use soluble materials for both support interface and support base." msgstr "" "Naudojant tirpią medžiagą palaikymo sąsajai (support interface), rekomenduojame šiuos nustatymus:\n" "0 viršutinis Z atstumas, 0 tarpas tarp sąsajų, persipynęs tiesiaeigis raštas, išjungti nepriklausomą palaikymo sluoksnio aukštį\n" "ir naudoti tirpias medžiagas tiek palaikymo sąsajai, tiek palaikymo pagrindui." msgid "Enabling this option will modify the model's shape. If your print requires precise dimensions or is part of an assembly, it's important to double-check whether this change in geometry impacts the functionality of your print." msgstr "Įjungus šią parinktį, pasikeis modelio forma. Jei jūsų spaudinys turi atitikti tikslius matmenis arba yra dalis didesnio mazgo, svarbu papildomai patikrinti, ar šis geometrijos pasikeitimas neturi įtakos jūsų spaudinio funkcionalumui." msgid "Are you sure you want to enable this option?" msgstr "Ar tikrai norite įjungti šią parinktį?" msgid "Infill patterns are typically designed to handle rotation automatically to ensure proper printing and achieve their intended effects (e.g., Gyroid, Cubic). Rotating the current sparse infill pattern may lead to insufficient support. Please proceed with caution and thoroughly check for any potential printing issues. Are you sure you want to enable this option?" msgstr "Užpildymo modeliai paprastai yra suprojektuoti taip, kad automatiškai tvarkytų sukimąsi, siekiant užtikrinti tinkamą spausdinimą ir pasiekti numatytus efektus (pvz., Gyroid, Cubic). Sukant esamą retą užpildymo modelį, gali atsirasti nepakankamas atraminis paviršius. Prašome elgtis atsargiai ir atidžiai patikrinti, ar nėra galimų spausdinimo problemų. Ar tikrai norite įjungti šią parinktį?" msgid "" "Layer height is too small.\n" "It will set to min_layer_height\n" msgstr "" "Per mažas sluoksnio aukštis.\n" "Jis bus nustatytas į min_layer_height\n" msgid "Layer height exceeds the limit in Printer Settings -> Extruder -> Layer height limits, this may cause printing quality issues." msgstr "Sluoksnio aukštis viršija ribą, nurodytą Spausdintuvo nustatymai -> Ekstruderis -> Sluoksnio aukščio ribos, tai gali sukelti spausdinimo kokybės problemų." msgid "Adjust to the set range automatically?\n" msgstr "" "Sureguliuoti pagal nustatytą diapazoną automatiškai?\n" "\n" msgid "Adjust" msgstr "Sureguliuoti" msgid "Experimental feature: Retracting and cutting off the filament at a greater distance during filament changes to minimize flush. Although it can notably reduce flush, it may also elevate the risk of nozzle clogs or other printing complications." msgstr "Eksperimentinė funkcija: gijos įtraukimas ir nukirpimas didesniu atstumu keičiant giją, siekiant sumažinti išvalymą (flush). Nors tai gali pastebimai sumažinti išvalymą, taip pat gali padidėti purkštuko užsikimšimo ar kitų spausdinimo komplikacijų rizika." msgid "Experimental feature: Retracting and cutting off the filament at a greater distance during filament changes to minimize flush. Although it can notably reduce flush, it may also elevate the risk of nozzle clogs or other printing complications. Please use with the latest printer firmware." msgstr "Eksperimentinė funkcija: gijos įtraukimas ir nukirpimas didesniu atstumu keičiant giją, siekiant sumažinti išvalymą (flush). Nors tai gali pastebimai sumažinti išvalymą, taip pat gali padidėti purkštuko užsikimšimo ar kitų spausdinimo komplikacijų rizika. Naudokite su naujausia spausdintuvo programine aparatine įranga." msgid "" "When recording timelapse without toolhead, it is recommended to add a \"Timelapse Wipe Tower\" \n" "by right-click the empty position of build plate and choose \"Add Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "Įrašant laiko tarpų (timelapse) vaizdo įrašą be spausdinimo galvutės, rekomenduojama pridėti „laiko tarpų valymo bokštą“ \n" "dešiniuoju pelės mygtuku spustelint tuščią spausdinimo pagrindo vietą ir pasirenkant „Pridėti primityvą“ -> „laiko tarpų valymo bokštas“." msgid "A copy of the current system preset will be created, which will be detached from the system preset." msgstr "Bus sukurta dabartinio sistemos profilio kopija, kuri bus atskirta nuo sistemos profilio." msgid "The current custom preset will be detached from the parent system preset." msgstr "Dabartinis pasirinktinis profilis bus atskirtas nuo pagrindinio sistemos profilio." msgid "Modifications to the current profile will be saved." msgstr "Dabartinio profilio pakeitimai bus išsaugoti." msgid "" "This action is not revertible.\n" "Do you want to proceed?" msgstr "" "Šis veiksmas yra negrįžtamas.\n" "Ar norite tęsti?" msgid "Detach preset" msgstr "Atjungti profilį" msgid "This is a default preset." msgstr "Tai numatytasis profilis." msgid "This is a system preset." msgstr "Tai sistemos profilis." msgid "Current preset is inherited from the default preset." msgstr "Dabartinis profilis yra paveldėtas iš numatytojo profilio." msgid "Current preset is inherited from" msgstr "Dabartinis profilis yra paveldėtas iš" msgid "It can't be deleted or modified." msgstr "Jo negalima ištrinti ar keisti." msgid "Any modifications should be saved as a new preset inherited from this one." msgstr "Visi pakeitimai turėtų būti išsaugoti kaip naujas profilis, paveldėtas iš šio." msgid "To do that please specify a new name for the preset." msgstr "Norėdami tai padaryti, nurodykite naują profilio pavadinimą." msgid "Additional information:" msgstr "Papildoma informacija:" msgid "vendor" msgstr "gamintojas" msgid "printer model" msgstr "spausdintuvo modelis" msgid "default print profile" msgstr "numatytasis spausdinimo profilis" msgid "default filament profile" msgstr "numatytasis gijos profilis" msgid "default SLA material profile" msgstr "numatytasis SLA medžiagos profilis" msgid "default SLA print profile" msgstr "numatytasis SLA spausdinimo profilis" msgid "full profile name" msgstr "pilnas profilio pavadinimas" msgid "symbolic profile name" msgstr "simbolinis profilio pavadinimas" msgid "Line width" msgstr "Linijos plotis" msgid "Precision" msgstr "Tikslumas" msgid "Z contouring" msgstr "Z ašies kontūravimas" msgid "Wall generator" msgstr "Sienų generatorius" msgid "Walls and surfaces" msgstr "Sienos ir paviršiai" msgid "Bridging" msgstr "Tiltai" msgid "Walls" msgstr "Sienos" msgid "Top/bottom shells" msgstr "Viršutiniai/apatiniai paviršiai" msgid "First layer speed" msgstr "Pradinio sluoksnio greitis" msgid "Other layers speed" msgstr "Kitų sluoksnių greitis" msgid "Overhang speed" msgstr "Iškyšų greitis" msgid "This is the speed for various overhang degrees. Overhang degrees are expressed as a percentage of line width. 0 speed means no slowing down for the overhang degree range and wall speed is used" msgstr "Šiame nustatyme nurodomas spausdinimo greitis skirtingiems iškyšos laipsniams. Iškyšos laipsnis pateikiamas linijos pločio procentine išraiška. 0 greitis reiškia, kad nepristabdoma nė vienam iškyšos laipsniui ir naudojamas sienelės spausdinimo greitis" msgid "Set speed for external and internal bridges" msgstr "Vidinių ir išorinių tiltų greitis" msgid "Travel speed" msgstr "Judėjimo greitis" msgid "Junction Deviation" msgstr "Sujungimo nuokrypis" msgid "Jerk(XY)" msgstr "Pagreitis (XY)" msgid "Raft" msgstr "Platforma" msgid "Filament for Supports" msgstr "Gija atramoms" msgid "Support ironing" msgstr "Atramų lyginimas" msgid "Tree supports" msgstr "Medžio tipo atramos" msgid "Multimaterial" msgstr "Kelios medžiagos" msgid "Filament for Features" msgstr "Gija funkcijoms" msgid "Ooze prevention" msgstr "Ištekėjimo prevencija" msgid "Special mode" msgstr "Specialus režimas" msgid "G-code output" msgstr "G-kodo išvestis" msgid "Change extrusion role G-code" msgstr "Ekstruzijos vaidmens keitimo G-kodas" msgid "Post-processing Scripts" msgstr "Scenarijai po apdorojimo" # AI Translated msgid "Slicing Pipeline Plugin" msgstr "Pjaustymo konvejerio papildinys" # AI Translated msgid "Plugin Configuration" msgstr "Papildinio konfigūracija" msgid "Notes" msgstr "Pastabos" msgid "Frequent" msgstr "Dažnai" # AI Translated #, c-format, boost-format msgid "" "Following line %s contains reserved keywords.\n" "Please remove it, or G-code visualization and print time estimation will be broken." msgid_plural "" "Following lines %s contain reserved keywords.\n" "Please remove them, or G-code visualization and print time estimation will be broken." msgstr[0] "" "Toliau nurodytoje eilutėje %s yra rezervuotų raktažodžių.\n" "Pašalinkite ją, kitaip G-code vaizdavimas ir spausdinimo laiko įvertinimas neveiks." msgstr[1] "" "Toliau nurodytose eilutėse %s yra rezervuotų raktažodžių.\n" "Pašalinkite jas, kitaip G-code vaizdavimas ir spausdinimo laiko įvertinimas neveiks." msgstr[2] "" "Toliau nurodytose eilutėse %s yra rezervuotų raktažodžių.\n" "Pašalinkite jas, kitaip G-code vaizdavimas ir spausdinimo laiko įvertinimas neveiks." msgid "Reserved keywords found" msgstr "Rasti rezervuoti raktažodžiai" msgid "Setting Overrides" msgstr "Nustatymų perrašymas" msgid "Basic information" msgstr "Pagrindinė informacija" msgid "Recommended nozzle temperature" msgstr "Rekomenduojama purkštuko temperatūra" msgid "Recommended nozzle temperature range of this filament. 0 means not set" msgstr "Rekomenduojamas šios gijos purkštuko temperatūros diapazonas. 0 reiškia, kad nenustatyta" msgid "Flow ratio and Pressure Advance" msgstr "Srauto santykis ir slėgis" msgid "Print chamber temperature" msgstr "Spausdinimo kameros temperatūra" msgid "Chamber temperature" msgstr "Kameros temperatūra" msgid "Target chamber temperature, and the minimal chamber temperature at which printing should start" msgstr "Tikslinė kameros temperatūra ir minimali kameros temperatūra, kuriai esant turėtų prasidėti spausdinimas" msgid "Target" msgstr "Tikslinė" msgid "Minimal" msgstr "Minimali" msgid "Print temperature" msgstr "Spausdinimo temperatūra" msgid "Nozzle temperature when printing" msgstr "Purkštuko temperatūra spausdinant" msgid "Bed temperature when the Cool Plate SuperTack is installed. A value of 0 means the filament does not support printing on the Cool Plate SuperTack." msgstr "Spausdinimo pagrindo temperatūra, kai naudojamas „Cool Plate SuperTack“ pagrindas. Reikšmė 0 reiškia, kad gija nepritaikyta spausdinti ant „Cool Plate SuperTack“ pagrindo." msgid "Cool Plate" msgstr "Šaltas pagrindas" msgid "This is the bed temperature when the Cool Plate is installed. A value of 0 means the filament does not support printing on the Cool Plate." msgstr "Spausdinimo pagrindo temperatūra, kai naudojamas šaltas pagrindas. Reikšmė 0 reiškia, kad gija nepritaikyta spausdinti ant šalto pagrindo." msgid "Textured Cool Plate" msgstr "Tekstūruotas vėsus pagrindas" msgid "This is the bed temperature when the Textured Cool Plate is installed. A value of 0 means the filament does not support printing on the Textured Cool Plate." msgstr "Spausdinimo pagrindo temperatūra, kai naudojamas tekstūruotas šaltas pagrindas. Reikšmė 0 reiškia, kad gija nepritaikyta spausdinti ant tekstūruoto šalto pagrindo." msgid "This is the bed temperature when the engineering plate is installed. A value of 0 means the filament does not support printing on the Engineering Plate." msgstr "Spausdinimo pagrindo temperatūra, kai naudojamas inžinerinis pagrindas. Reikšmė 0 reiškia, kad gija nepritaikyta spausdinti ant inžinerinio pagrindo." msgid "Smooth PEI Plate / High Temp Plate" msgstr "Lygus PEI pagrindas / aukštos temperatūros pagrindas" msgid "This is the bed temperature when the Smooth PEI Plate/High Temperature Plate is installed. A value of 0 means the filament does not support printing on the Smooth PEI Plate/High Temp Plate." msgstr "Spausdinimo pagrindo temperatūra, kai naudojamas lygus PEI pagrindas / aukštos temperatūros pagrindas. Reikšmė 0 reiškia, kad gija nepritaikyta spausdinti ant lygaus PEI pagrindo / aukštos temperatūros pagrindo." msgid "This is the bed temperature when the Textured PEI Plate is installed. A value of 0 means the filament does not support printing on the Textured PEI Plate." msgstr "Spausdinimo pagrindo temperatūra, kai naudojamas tekstūruotas PEI pagrindas. Reikšmė 0 reiškia, kad gija nepritaikyta spausdinti ant tekstūruoto PEI pagrindo." msgid "Volumetric speed limitation" msgstr "Tūrinio greičio ribojimas" msgid "Cooling for specific layer" msgstr "Konkretaus sluoksnio aušinimas" msgid "Part cooling fan" msgstr "Dalies aušinimo ventiliatorius" msgid "Min fan speed threshold" msgstr "Min. ventiliatoriaus greičio riba" msgid "The part cooling fan will run at the minimum fan speed when the estimated layer time is longer than the threshold value. When the layer time is shorter than the threshold, the fan speed will be interpolated between the minimum and maximum fan speed according to layer printing time." msgstr "Detalių aušinimo ventiliatorius veiks mažiausiu ventiliatoriaus greičiu, kai numatoma sluoksnio trukmė bus ilgesnė už ribinę vertę. Kai sluoksnio trukmė trumpesnė už ribinę vertę, ventiliatoriaus greitis bus apskaičiuojamas tarp mažiausio ir didžiausio ventiliatoriaus greičio, atsižvelgiant į sluoksnio spausdinimo trukmę" msgid "Max fan speed threshold" msgstr "Maks ventiliatoriaus greičio riba" msgid "The part cooling fan will run at maximum speed when the estimated layer time is shorter than the threshold value." msgstr "Detalių aušinimo ventiliatorius veiks didžiausiu greičiu, kai numatoma sluoksnio trukmė bus trumpesnė už ribinę vertę" msgid "Auxiliary part cooling fan" msgstr "Pagalbinis dalies aušinimo ventiliatorius" msgid "Exhaust fan" msgstr "Ištraukimo ventiliatorius" msgid "During print" msgstr "Spausdinant" msgid "Complete print" msgstr "Baigus spausdinti" msgid "Filament start G-code" msgstr "Gijos pradžios G-kodas" msgid "Filament end G-code" msgstr "Gijos pabaigos G-kodas" msgid "Wipe tower parameters" msgstr "Valymo bokšto parametrai" msgid "Multi Filament" msgstr "Kelių gijų sistema" msgid "Tool change parameters with single extruder MM printers" msgstr "Įrankių keitimo parametrai naudojant vieno ekstruderio MM spausdintuvus" msgid "Set" msgstr "Nustatyti" msgid "Tool change parameters with multi extruder MM printers" msgstr "Įrankių keitimo parametrai su kelių ekstruderių MM spausdintuvais" msgid "Dependencies" msgstr "Priklausomybės" msgid "Compatible printers" msgstr "Suderinami spausdintuvai" msgid "Compatible process profiles" msgstr "Suderinami apdorojimo profiliai" msgid "Printable space" msgstr "Erdvė spausdinimui" #. TRN: The first argument is the parameter's name; the second argument is its value. #, boost-format msgid "Invalid value provided for parameter %1%: %2%" msgstr "Neteisinga parametro %1% reikšmė: %2%" msgid "G-code flavor is switched" msgstr "Perjungtas G-kodo tipas" msgid "Cooling Fan" msgstr "Aušinimo ventiliatorius" msgid "Fan speed-up time" msgstr "Ventiliatoriaus įsibėgėjimo laikas" msgid "Extruder Clearance" msgstr "Ekstruderio laisvoji erdvė" msgid "Adaptive bed mesh" msgstr "Prisitaikantis pagrindo tinklelis" msgid "Accessory" msgstr "Priedai" msgid "Machine G-code" msgstr "Įrenginio G-kodas" msgid "File header G-code" msgstr "Failo antraštės G-kodas" msgid "Machine start G-code" msgstr "Įrenginio pradžios G-kodas" msgid "Machine end G-code" msgstr "Įrenginio pabaigos G-kodas" msgid "Printing by object G-code" msgstr "Spausdinimo pagal objektą G-kodas" msgid "Before layer change G-code" msgstr "G-kodas prieš keičiant sluoksnį" msgid "Layer change G-code" msgstr "Sluoksnio keitimo G-kodas" msgid "Timelapse G-code" msgstr "Laiko tarpų (timelapse) vaizdo įrašo G-kodas" msgid "Clumping Detection G-code" msgstr "Sulipimo aptikimo G-kodas" msgid "Change filament G-code" msgstr "Gijos keitimo G-kodas" msgid "Pause G-code" msgstr "Pauzės G-kodas" msgid "Template Custom G-code" msgstr "Pasirinktinis G-kodo šablonas" msgid "Motion ability" msgstr "Judėjimo parinktys" msgid "Normal" msgstr "Normalus" msgid "Resonance Compensation" msgstr "Resonanso kompensavimas" msgid "Resonance Avoidance Speed" msgstr "Rezonanso išvengimo greitis" msgid "Frequency" msgstr "Dažnis" msgid "The frequency of the anti-vibration signal will correspond to the natural frequency of the frame." msgstr "Antivibracinio signalo dažnis atitiks rėmo savitąjį dažnį." msgid "Damping" msgstr "Slopinimas" msgid "Damping ratio for the input shaping filter." msgstr "Slopinimo koeficientas įvesties formavimo (input shaping) filtrui." msgid "Speed limitation" msgstr "Greičio ribojimas" msgid "Acceleration limitation" msgstr "Pagreičio ribojimas" msgid "Jerk limitation" msgstr "Trūkčiojimo (jerk) ribojimas" msgid "Single extruder multi-material setup" msgstr "Vieno ekstruderio kelių medžiagų sąranka" msgid "Number of extruders of the printer." msgstr "Spausdintuvo ekstruderių skaičius." msgid "" "Single Extruder Multi Material is selected,\n" "and all extruders must have the same diameter.\n" "Do you want to change the diameter for all extruders to first extruder nozzle diameter value?" msgstr "" "Pasirinkta vieno ekstruderio kelių medžiagų sistema,\n" "ir visų ekstruderių skersmuo turi būti vienodas.\n" "Ar norite pakeisti visų ekstruderių skersmenį į pirmojo ekstruderio purkštuko skersmens reikšmę?" msgid "Nozzle diameter" msgstr "Purkštuko skersmuo" msgid "Wipe tower" msgstr "Valymo bokštas" msgid "Single extruder multi-material parameters" msgstr "Vieno ekstruderio kelių medžiagų parametrai" msgid "This is a single extruder multi-material printer, diameters of all extruders will be set to the new value. Do you want to proceed?" msgstr "Tai yra vieno ekstruderio ir kelių medžiagų spausdintuvas, todėl visų ekstruderių skersmenys bus nustatyti pagal naują vertę. Ar norite tęsti?" msgid "Layer height limits" msgstr "Sluoksnio aukščio ribos" msgid "Z-Hop" msgstr "Z šuolis" msgid "Retraction when switching material" msgstr "Įtraukimas keičiant medžiagą" msgid "" "The Retract before wipe option could be only 100% when using the Firmware Retraction mode.\n" "\n" "Shall I set it to 100% in order to enable Firmware Retraction?" msgstr "" "Parinktis „Įtraukti prieš valymą“ (Retract before wipe) gali būti tik 100%, kai naudojamas programinės aparatinės įrangos įtraukimo (Firmware Retraction) režimas.\n" "\n" "Ar nustatyti ją į 100%, kad būtų įjungtas programinės aparatinės įrangos įtraukimas?" msgid "Firmware Retraction" msgstr "Programinės aparatinės įrangos įtraukimas" msgid "Switching to a printer with different extruder types or numbers will discard or reset changes to extruder or multi-nozzle-related parameters." msgstr "Perjungus spausdintuvą su kitokio tipo ar skaičiaus ekstruderiais, bus atmesti arba nustatyti iš naujo ekstruderio arba su keliais purkštukais susiję parametrai." msgid "Use Modified Value" msgstr "Naudoti pakeistą reikšmę" msgid "Detached" msgstr "Atjungta" #, c-format, boost-format msgid "%d Filament Preset and %d Process Preset is attached to this printer. Those presets would be deleted if the printer is deleted." msgstr "Prie šio spausdintuvo yra priskirtas %d gijos profilis ir %d apdorojimo profilis. Ištrynus spausdintuvą, šie profiliai taip pat bus ištrinti." msgid "Presets inherited by other presets cannot be deleted!" msgstr "Profilių, kuriuos paveldi kiti profiliai, ištrinti negalima!" msgid "The following presets inherit this preset." msgid_plural "The following preset inherits this preset." msgstr[0] "Šį profilį paveldi šis profilis." msgstr[1] "Šį profilį paveldi šie profiliai." msgstr[2] "Šį profilį paveldi šie profiliai." #. TRN Remove/Delete #, boost-format msgid "%1% Preset" msgstr "%1% profilis" # AI Translated msgid "The following preset will be deleted too:" msgid_plural "The following presets will be deleted too:" msgstr[0] "Toliau nurodytas profilis taip pat bus ištrintas:" msgstr[1] "Toliau nurodyti profiliai taip pat bus ištrinti:" msgstr[2] "Toliau nurodyti profiliai taip pat bus ištrinti:" msgid "" "Are you sure to delete the selected preset?\n" "If the preset corresponds to a filament currently in use on your printer, please reset the filament information for that slot." msgstr "" "Ar tikrai norite ištrinti pasirinktą profilį?\n" "Jei šis profilis atitinka šiuo metu jūsų spausdintuve naudojamą giją, iš naujo nustatykite tos lizdo vietos gijos informaciją." #, boost-format msgid "Are you sure you want to %1% the selected preset?" msgstr "Ar tikrai norite %1% pasirinkto išankstinio nustatymo?" msgid "Select printers" msgstr "Pasirinkite spausdintuvus" msgid "Select profiles" msgstr "Pasirinkti profilius" #, c-format, boost-format msgid "" " - %s:\n" " %s first layer %d %s, other layers %d %s\n" " %s max delta %d %s, current delta %d %s\n" msgstr "" "%s:\n" "%s pirmas sluoksnis %d %s, kiti sluoksniai %d %s\n" "%s maks. skirtumas %d %s, dabartinis skirtumas %d %s\n" msgid "Some first-layer and other-layer temperature pairs exceed safety limits.\n" msgstr "Kai kurios pradinio sluoksnio ir kitų sluoksnių temperatūrų poros viršija saugumo ribas.\n" msgid "" "\n" "Invalid pairs:\n" msgstr "" "\n" "Neteisingos poros:\n" msgid "" "\n" "You can go back to edit values, or continue if this is intentional." msgstr "" "\n" "Galite grįžti ir redaguoti reikšmes arba tęsti, jei tai padaryta tikslingai." msgid "" "\n" "\n" "Continue anyway?" msgstr "" "\n" "\n" "Vis tiek tęsti?" msgid "Temperature Safety Check" msgstr "Temperatūros saugumo patikra" msgid "Continue" msgstr "Tęsti" msgid "Don't warn again for this preset" msgstr "Daugiau neperspėti šiam profiliui" # AI Translated #, c-format, boost-format msgid "%s: %s" msgstr "%s: %s" msgid "No modifications need to be copied." msgstr "Nereikia kopijuoti jokių modifikacijų" msgid "Copy paramters" msgstr "Kopijuoti parametrus" #, c-format, boost-format msgid "Modify paramters of %s" msgstr "Modifikuoti %s parametrus" #, c-format, boost-format msgid "Do you want to modify the following parameters of the %s to that of the %s?" msgstr "Ar norite pakeisti šiuos %s parametrus į %s parametrus?" msgid "Click to reset current value and attach to the global value." msgstr "Spustelėkite , jei norite iš naujo nustatyti dabartinę reikšmę ir prijungti ją prie bendros reikšmės." msgid "Click to drop current modifications and reset to saved value." msgstr "Spustelėkite, jei norite atsisakyti dabartinio pakeitimo ir atstatyti išsaugotą reikšmę." msgid "Process Settings" msgstr "Apdorojimo nustatymai" msgid "unsaved changes" msgstr "neišsaugoti pakeitimai" msgid "Transfer or discard changes" msgstr "Pakeitimų perkėlimas arba atmetimas" msgid "Old Value" msgstr "Sena vertė" msgid "New Value" msgstr "Nauja vertė" msgid "Transfer" msgstr "Perkėlimas" msgid "Don't save" msgstr "Neišsaugoti" msgid "Discard" msgstr "Atsisakyti" msgid "the new profile" msgstr "naujas profilis" #, boost-format msgid "" "Switch to\n" "\"%1%\"\n" "discarding any changes made in\n" "\"%2%\"." msgstr "" "Perjungti į\n" "„%1%“,\n" "atmetant visus pakeitimus, padarytus\n" "„%2%“." #, boost-format msgid "" "All \"New Value\" settings modified in\n" "\"%1%\"\n" "will be transferred to\n" "\"%2%\"." msgstr "" "Visi „Nauja reikšmė“ nustatymai, pakeisti\n" "„%1%“,\n" "bus perkelti į\n" "„%2%“." #, boost-format msgid "" "All \"New Value\" settings are saved in\n" "\"%1%\"\n" "and \"%2%\" will open without any changes." msgstr "" "Visi „Nauja reikšmė“ nustatymai yra išsaugoti\n" "„%1%“,\n" "o „%2%“ bus atidarytas be jokių pakeitimų." msgid "Click the right mouse button to display the full text." msgstr "Spustelėkite dešinįjį pelės klavišą, kad būtų rodomas visas tekstas." msgid "No changes will be saved." msgstr "Nebus išsaugota pakeitimų." msgid "All changes will be discarded." msgstr "Visi pakeitimai bus atmesti." msgid "Save the selected options." msgstr "Išsaugoti pasirinktas parinktis." msgid "Keep the selected options." msgstr "Išlaikyti pasirinktas parinktis." msgid "Transfer the selected options to the newly selected preset." msgstr "Perkelti pasirinktas parinktis į naujai pasirinktą profilį." #, boost-format msgid "" "Save the selected options to preset \n" "\"%1%\"." msgstr "" "Pasirinktų parinkčių išsaugojimas profilyje\n" "\"%1%\"." #, boost-format msgid "" "Transfer the selected options to the newly selected preset \n" "\"%1%\"." msgstr "" "Pasirinktų parinkčių perkėlimas į naujai pasirinktą profilį\n" "\"%1%\"." #, boost-format msgid "Preset \"%1%\" contains the following unsaved changes:" msgstr "\"%1%\" profilyje yra šie neišsaugoti pakeitimai:" #, boost-format msgid "Preset \"%1%\" is not compatible with the new printer profile and it contains the following unsaved changes:" msgstr "\"%1%\" profilis nesuderinamas su naujuoju spausdintuvo profiliu ir jame yra šie neišsaugoti pakeitimai:" #, boost-format msgid "Preset \"%1%\" is not compatible with the new process profile and it contains the following unsaved changes:" msgstr "Profilis „%1%“ yra nesuderinamas su naujuoju apdorojimo profiliu ir jame yra šie neišsaugoti pakeitimai:" #, boost-format msgid "You have changed some settings of preset \"%1%\"." msgstr "Pakeitėte kai kuriuos profilio „%1%“ nustatymus." msgid "" "\n" "You can save or discard the preset values you have modified." msgstr "" "\n" "Pakeistas profilio reikšmes galite išsaugoti arba atmesti." msgid "" "\n" "You can save or discard the preset values you have modified, or choose to transfer the values you have modified to the new preset." msgstr "" "\n" "Galite išsaugoti arba atmesti pakeistas profilio reikšmes, arba pasirinkti perkelti jas į naują profilį." msgid "You have previously modified your settings." msgstr "Anksčiau pakeitėte savo nustatymus." msgid "" "\n" "You can discard the preset values you have modified, or choose to transfer the modified values to the new project" msgstr "" "\n" "Galite atmesti pakeistas profilio reikšmes arba pasirinkti perkelti jas į naują projektą" msgid "Extruder count" msgstr "Ekstruderių skaičius" msgid "Capabilities" msgstr "Galimybės" msgid "Left: " msgstr "Kairė:" msgid "Right: " msgstr "Dešinė:" msgid "Show all presets (including incompatible)" msgstr "Rodyti visus profilius (įskaitant nesuderinamus)" msgid "Select presets to compare" msgstr "Pasirinkite profilius, kuriuos norite palyginti" msgid "Left Preset Value" msgstr "Kairiojo profilio reikšmė" msgid "Right Preset Value" msgstr "Dešiniojo profilio reikšmė" msgid "You can only transfer to current active profile because it has been modified." msgstr "Galite perkelti tik į dabartinį aktyvų profilį, nes jis buvo pakeistas." msgid "" "Transfer the selected options from left preset to the right.\n" "Note: New modified presets will be selected in settings tabs after close this dialog." msgstr "" "Perkelkite pasirinktas parinktis iš kairiojo profilio į dešinįjį.\n" "Pastaba: uždarius šį dialogo langą, naujai pakeisti profiliai bus pasirinkti nustatymų skirtukuose." msgid "Transfer values from left to right" msgstr "Reikšmių perkėlimas iš kairės į dešinę" msgid "If enabled, this dialog can be used for transfer selected values from left to right preset." msgstr "Jei įjungta, šis dialogo langas gali būti naudojamas pasirinktoms reikšmėms perkelti iš kairiojo profilio į dešinįjį." # AI Translated msgid "One of the presets does not exist" msgstr "Vieno iš profilių nėra" # AI Translated msgid "Compared presets has different printer technology" msgstr "Palyginti profiliai naudoja skirtingą spausdintuvo technologiją" msgid "Add File" msgstr "Pridėti failą" msgid "Set as cover" msgstr "Nustatyti kaip viršelį" msgid "Cover" msgstr "Viršelis" #, boost-format msgid "The name \"%1%\" already exists." msgstr "Pavadinimas \"%1%\" jau egzistuoja." msgid "Basic Info" msgstr "Pagrindinė informacija" msgid "Pictures" msgstr "Paveikslėliai" msgid "Bill of Materials" msgstr "Komponentų ir medžiagų žiniaraštis (BOM)" msgid "Assembly Guide" msgstr "Surinkimo vadovas" msgid "Author" msgstr "Autorius" msgid "Model Name" msgstr "Modelio pavadinimas" msgid "Description:" msgstr "Aprašymas:" #, c-format, boost-format msgid "%s Update" msgstr "%s Atnaujinimas" msgid "A new version is available" msgstr "Yra nauja versija" msgid "Configuration update" msgstr "Konfigūracijos atnaujinimas" msgid "A new configuration package is available. Do you want to install it?" msgstr "Yra naujas konfigūracijos paketas. Ar norite jį įdiegti?" msgid "the configuration package is incompatible with the current application." msgstr "konfigūracijos paketas nesuderinamas su dabartine programa." #, c-format, boost-format msgid "" "The configuration package is incompatible with the current application.\n" "%s will update the configuration package to allow the application to start." msgstr "" "Konfigūracijos paketas nesuderinamas su dabartine programa.\n" "%s atnaujins konfigūracijos paketą, kad būtų galima paleisti programą." #, c-format, boost-format msgid "Exit %s" msgstr "Išeiti iš %s" msgid "Configuration updates" msgstr "Konfigūracijos atnaujinimai" msgid "No updates available." msgstr "Atnaujinimų nėra." msgid "The configuration is up to date." msgstr "Konfigūracija yra naujausia." msgid "OBJ file import color" msgstr "OBJ failo importavimo spalva" msgid "Some faces don't have color defined." msgstr "Kai kuriems paviršiams (faces) nėra apibrėžta spalva." msgid "MTL file exist error, could not find the material:" msgstr "MTL failo aptikimo klaida, nepavyko rasti medžiagos:" msgid "Please check OBJ or MTL file." msgstr "Patikrinkite OBJ arba MTL failą." msgid "Specify number of colors:" msgstr "Nurodykite spalvų kiekį:" msgid "Enter or click the adjustment button to modify number again" msgstr "Įveskite arba spustelėkite reguliavimo mygtuką, kad vėl pakeistumėte skaičių" msgid "Recommended " msgstr "Rekomenduojama " msgid "view" msgstr "peržiūra" msgid "Current filament colors" msgstr "Dabartinės gijos spalvos" msgid "Matching" msgstr "Atitinkama" msgid "Quick set" msgstr "Greitas nustatymas" msgid "Color match" msgstr "Spalvų atitikimas" msgid "Approximate color matching." msgstr "Apytikslis spalvų atitikimas." msgid "Append" msgstr "Pridėti" msgid "Append to existing filaments" msgstr "Pridėti prie esamų gijų" msgid "Reset mapped extruders." msgstr "Iš naujo nustatyti priskirtus ekstruderius." msgid "Note" msgstr "Pastaba" msgid "" "The color has been selected, you can choose OK \n" " to continue or manually adjust it." msgstr "" "Spalva pasirinkta, galite spausti Gerai,\n" "kad tęstumėte, arba sureguliuoti ją rankiniu būdu." msgid "—> " msgstr "—> " msgid "" "Synchronizing AMS filaments will discard your modified but unsaved filament presets.\n" "Are you sure you want to continue?" msgstr "" "Sinchronizuojant AMS gijas, visi pakeisti, bet neišsaugoti gijos profiliai bus atmesti.\n" "Ar tikrai norite tęsti?" msgctxt "Sync_AMS" msgid "Original" msgstr "Originalas" msgid "After mapping" msgstr "Po priskyrimo" msgid "After overwriting" msgstr "Po perrašymo" msgctxt "Sync_AMS" msgid "Plate" msgstr "Plokštė" msgid "The connected printer does not match the currently selected printer. Please change the selected printer." msgstr "Prijungtas spausdintuvas neatitinka šiuo metu pasirinkto spausdintuvo. Pakeiskite pasirinktą spausdintuvą." msgid "Mapping" msgstr "Priskyrimas" msgid "Overwriting" msgstr "Perrašymas" msgid "Reset all filament mapping" msgstr "Iš naujo nustatyti visus gijų priskyrimus" msgid "(Recommended filament)" msgstr "(Rekomenduojama gija)" msgid "Advanced Options" msgstr "Papildomos parinktys" msgid "" "Check heatbed flatness. Leveling makes extruded height uniform.\n" "*Automatic mode: Level first (about 10 seconds). Skip if surface is fine." msgstr "" "Patikrinkite šildomo pagrindo lygumą. Gulsčiavimas užtikrina tolygų ekstruzijos aukštį.\n" "*Automatinis režimas: pirmiausia suniveliuokite (apie 10 sekundžių). Praleiskite, jei paviršius yra tinkamas." msgid "" "Calibrate nozzle offsets to enhance print quality.\n" "*Automatic mode: Check for calibration before printing; skip if unnecessary." msgstr "" "Kalibruokite purkštuko poslinkius (offsets), kad pagerintumėte spaudinio kokybę.\n" "*Automatinis režimas: prieš spausdinimą patikrinkite kalibravimą; praleiskite, jei tai nebūtina." msgid "Use AMS" msgstr "Naudoti AMS" msgid "Tip" msgstr "Patarimas" msgid "Only synchronize filament type and color, not including AMS slot information." msgstr "Sinchronizuoti tik gijos tipą ir spalvą, neįtraukiant AMS lizdo informacijos." msgid "Replace the project filaments list sequentially based on printer filaments. And unused printer filaments will be automatically added to the end of the list." msgstr "Nuosekliai pakeisti projekto gijų sąrašą remiantis spausdintuvo gijomis. Nenaudojamos spausdintuvo gijos bus automatiškai pridėtos į sąrašo pabaigą." msgid "Add unused AMS filaments to filaments list." msgstr "Pridėti nenaudojamas AMS gijas į gijų sąrašą." msgid "Automatically merge the same colors in the model after mapping." msgstr "Po priskyrimo automatiškai sujungti vienodas modelio spalvas." msgid "After being synced, this action cannot be undone." msgstr "Po sinchronizavimo šio veiksmo atšaukti nebus galima." msgid "After being synced, the project's filament presets and colors will be replaced with the mapped filament types and colors. This action cannot be undone." msgstr "Po sinchronizavimo projekto gijų profiliai ir spalvos bus pakeisti priskirtais gijų tipais bei spalvomis. Šio veiksmo atšaukti nebus galima." msgid "Are you sure to synchronize the filaments?" msgstr "Ar tikrai norite sinchronizuoti gijas?" msgid "Synchronize now" msgstr "Sinchronizuoti dabar" msgid "Synchronize Filament Information" msgstr "Sinchronizuoti gijos informaciją" msgid "Add unused filaments to filaments list." msgstr "Pridėti nenaudojamas gijas į gijų sąrašą." msgid "Only synchronize filament type and color, not including slot information." msgstr "Sinchronizuoti tik gijos tipą ir spalvą, neįtraukiant lizdo informacijos." msgid "Ext spool" msgstr "Išorinė ritė" msgid "Please check whether the nozzle type of the device is the same as the preset nozzle type." msgstr "Patikrinkite, ar įrenginio purkštuko tipas sutampa su profilyje nustatytu purkštuko tipu." msgid "Storage is not available or is in read-only mode." msgstr "Saugykla nepasiekiama arba veikia tik skaitymo režimu." #, c-format, boost-format msgid "The selected printer (%s) is incompatible with the chosen printer profile in the slicer (%s)." msgstr "Pasirinktas spausdintuvas (%s) nesuderinamas su pasirinktu spausdintuvo profiliu programoje (%s)." msgid "Timelapse is not supported because Print sequence is set to \"By object\"." msgstr "Pakadrinis įrašymas nepalaikomas, nes pasirinkta spausdinimo eiga \"Pagal objektą\"." msgid "You selected external and AMS filament at the same time in an extruder, you will need manually change external filament." msgstr "Tam pačiam ekstruderiui vienu metu priskyrėte išorinę ir AMS giją, todėl išorinę giją turėsite pakeisti rankiniu būdu." msgid "Successfully synchronized nozzle information." msgstr "Purkštuko informacija sėkmingai sinchronizuota." msgid "Successfully synchronized nozzle and AMS number information." msgstr "Purkštuko ir AMS skaičiaus informacija sėkmingai sinchronizuota." # AI Translated msgid "Do you want to continue to sync filaments?" msgstr "Ar norite tęsti gijų sinchronizavimą?" msgid "Successfully synchronized filament color from printer." msgstr "Gijos spalva sėkmingai sinchronizuota iš spausdintuvo." msgid "Successfully synchronized color and type of filament from printer." msgstr "Gijos spalva ir tipas sėkmingai sinchronizuoti iš spausdintuvo." msgctxt "FinishSyncAms" msgid "OK" msgstr "Gerai" msgid "Ramming customization" msgstr "Gijos supresavimo (ramming) pritaikymas" msgid "" "Ramming denotes the rapid extrusion just before a tool change in a single-extruder MM printer. Its purpose is to properly shape the end of the unloaded filament so it does not prevent insertion of the new filament and can itself be reinserted later. This phase is important and different materials can require different extrusion speeds to get the good shape. For this reason, the extrusion rates during ramming are adjustable.\n" "\n" "This is an expert-level setting, incorrect adjustment will likely lead to jams, extruder wheel grinding into filament etc." msgstr "" "Supresavimas (ramming) reiškia greitą ekstruziją prieš pat įrankio keitimą vieno ekstruderio kelių medžiagų (MM) spausdintuve. Jo tikslas – tinkamai suformuoti iškraunamos gijos galą, kad jis netrukdytų įkišti naujos gijos ir vėliau ją būtų galima vėl įstumti. Šis etapas yra labai svarbus, o skirtingoms medžiagoms gali prireikti skirtingo ekstruzijos greičio tinkamai formai gauti. Dėl šios priežasties ekstruzijos greičiai supresavimo metu yra reguliuojami.\n" "\n" "Tai yra eksperto lygio nustatymas – neteisingai sureguliavus, tikėtini strigtys, ekstruderio ratuko gijos šlifavimas (grinding) ir kt." #, boost-format msgid "For constant flow rate, hold %1% while dragging." msgstr "Norėdami išlaikyti pastovų srauto greitį, vilkdami laikykite nuspaudę %1%." msgid "ms" msgstr "ms" msgid "Total ramming" msgstr "Bendras supresavimas (ramming)" msgid "Volume" msgstr "Tūris" msgid "Ramming line" msgstr "Supresavimo (ramming) linija" msgid "Orca would re-calculate your flushing volumes everytime the filaments color changed or filaments changed. You could disable the auto-calculate in Orca Slicer > Preferences" msgstr "„Orca“ iš naujo perskaičiuos jūsų išvalymo (flushing) tūrius kiekvieną kartą, kai pasikeis gijos spalva arba pati gija. Šį automatinį perskaičiavimą galite išjungti skiltyje „Orca Slicer“ > „Nuostatos“ (Preferences)." msgid "Flushing volume (mm³) for each filament pair." msgstr "Kiekvienos gijų poros išmetimo tūris (mm³)." #, c-format, boost-format msgid "Suggestion: Flushing Volume in range [%d, %d]" msgstr "Pasiūlymas: Išmetimo tūris [%d, %d] ribose" #, c-format, boost-format msgid "The multiplier should be in range [%.2f, %.2f]." msgstr "Daugiklis turėtų būti iš intervalo [%.2f, %.2f]." msgid "Re-calculate" msgstr "Perskaičiuoti" msgid "Multiplier" msgstr "Daugiklis" msgid "Flushing volumes for filament change" msgstr "Išmetimo tūris keičiant gijas" msgid "Please choose the filament colour" msgstr "Pasirinkite gijos spalvą" msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer." msgstr "Tiesioginei „Native Wayland“ peržiūrai reikalingas „GStreamer GTK“ vaizdo sinchronizatorius (video sink). Įdiekite „GStreamer“ skirtą „gtksink“ papildinį, tada iš naujo paleiskite „OrcaSlicer“." msgid "Failed to initialize the native Wayland GStreamer video sink. Please check your GStreamer GTK plugin installation." msgstr "Nepavyko inicijuoti „native Wayland GStreamer“ vaizdo sinchronizatoriaus (video sink). Patikrinkite „GStreamer GTK“ papildinio įdiegimą." msgid "Windows Media Player is required for this task! Do you want to enable 'Windows Media Player' for your operation system?" msgstr "Šiai užduočiai atlikti reikalingas \"Windows Media Player\"! Ar norite įjungti \"Windows Media Player\" savo operacinėje sistemoje?" msgid "BambuSource has not correctly been registered for media playing! Press Yes to re-register it. You will be promoted twice" msgstr "„BambuSource“ neteisingai užregistruotas medijos atkūrimui! Paspauskite „Taip“, kad jį perregistruotumėte. Jums reikės patvirtinti du kartus." msgid "Missing BambuSource component registered for media playing! Please re-install OrcaSlicer or seek community help." msgstr "Trūksta BambuSource komponento, užregistruoto medijos atkūrimui! Iš naujo įdiekite OrcaSlicer arba kreipkitės pagalbos į bendruomenę." msgid "Using a BambuSource from a different install, video play may not work correctly! Press Yes to fix it." msgstr "Naudojant \"BambuSource\" iš kito diegimo šaltinio, vaizdo įrašų atkūrimas gali būti neteisingas! Paspauskite Taip, kad tai ištaisytumėte." msgid "Your system is missing H.264 codecs for GStreamer, which are required to play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-libav packages, then restart Orca Slicer?)" msgstr "Jūsų sistemoje nėra \"GStreamer\" H.264 kodekų, reikalingų vaizdo įrašams atkurti. (Pabandykite įdiegti gstreamer1.0-plugins-bad arba gstreamer1.0-libav paketus, tada iš naujo paleiskite \"Orca Slicer\")" msgid "Cloud agent is not available. Please restart OrcaSlicer and try again." msgstr "Debesies agentas nepasiekiamas. Iš naujo paleiskite „OrcaSlicer“ ir bandykite vėl." msgid "Bambu Network plug-in not detected." msgstr "\"Bambu\" tinklo papildinys neaptiktas." msgid "Click here to download it." msgstr "Spustelėkite čia, jei norite jį atsisiųsti." msgid "Login" msgstr "Prisijungti" msgid "Login failed. Please try again." msgstr "Prisijungti nepavyko. Bandykite dar kartą." # AI Translated msgid "parse json failed" msgstr "nepavyko išanalizuoti json" msgid "[Action Required] " msgstr "[Reikalingas veiksmas] " msgid "[Action Required]" msgstr "[Reikalingas veiksmas]" msgid "The configuration package is changed in previous Config Guide" msgstr "Konfigūracijos paketas buvo pakeistas ankstesniame konfigūravimo vadove" msgid "Configuration package changed" msgstr "Pakeistas konfigūracijos paketas" msgid "Toolbar" msgstr "Įrankių juosta" msgid "Objects list" msgstr "Objektų sąrašas" msgid "Import geometry data from STL/STEP/3MF/OBJ/AMF files" msgstr "Importuoti geometrijos duomenis iš STL/STEP/3MF/OBJ/AMF failų" msgid "Paste from clipboard" msgstr "Įklijuoti iš mainų srities" msgid "Show/Hide 3Dconnexion devices settings dialog" msgstr "Rodyti/slėpti 3DConnexion įrenginių nustatymų dialogo langą" msgid "Switch table page" msgstr "Perjungti lentelės puslapį" msgid "Show keyboard shortcuts list" msgstr "Rodyti sparčiųjų klavišų sąrašą" msgid "Global shortcuts" msgstr "Bendrieji spartieji klavišai" msgid "Pan View" msgstr "Vaizdo stūmimas (panoraminis vaizdas)" msgid "Rotate View" msgstr "Vaizdo pasukimas" msgid "Middle mouse button" msgstr "Vidurinis pelės mygtukas" msgid "Zoom View" msgstr "Vaizdo mastelio keitimas (zoom)" msgid "Auto orients selected objects or all objects. If there are selected objects, it just orients the selected ones. Otherwise, it will orient all objects in the current project." msgstr "Automatiškai orientuoja pasirinktus objektus arba visus objektus. Jei yra pasirinkti objektai, orientuoja tik pasirinktus. Kitais atvejais orientuoja visus esamo projekto objektus." msgid "Auto orients all objects on the active plate." msgstr "Automatiškai orientuoja visus objektus aktyvioje plokštėje." msgid "Collapse/Expand the sidebar" msgstr "Sutraukti / išskleisti šoninę juostą" msgid "Any arrow" msgstr "Bet kuri rodyklė" msgid "Movement in camera space" msgstr "Judėjimas kameros erdvėje" msgid "Select a part" msgstr "Pasirinkti dalį" msgid "Select multiple objects" msgstr "Pasirinkite kelis objektus" msgid "Select objects by rectangle" msgstr "Pasirinkti objektus stačiakampio rėmeliu" # AI Translated msgctxt "Keyboard Shortcut" msgid "Arrow Up" msgstr "Rodyklė aukštyn" msgid "Move selection 10mm in positive Y direction" msgstr "Perkelti pasirinkimą 10 mm teigiama Y kryptimi" # AI Translated msgctxt "Keyboard Shortcut" msgid "Arrow Down" msgstr "Rodyklė žemyn" msgid "Move selection 10mm in negative Y direction" msgstr "Perkelti pasirinkimą 10 mm neigiama Y kryptimi" # AI Translated msgctxt "Keyboard Shortcut" msgid "Arrow Left" msgstr "Rodyklė kairėn" msgid "Move selection 10mm in negative X direction" msgstr "Perkelti pasirinkimą 10 mm neigiama X kryptimi" # AI Translated msgctxt "Keyboard Shortcut" msgid "Arrow Right" msgstr "Rodyklė dešinėn" msgid "Move selection 10mm in positive X direction" msgstr "Perkelti pasirinkimą 10 mm teigiama X kryptimi" msgid "Movement step set to 1mm" msgstr "Judėjimo žingsnis nustatytas į 1 mm" msgid "Keyboard 1-9: set filament for object/part" msgstr "Klaviatūra 1-9: nustatyti objekto/dalies giją" msgid "Camera view - Default" msgstr "Kameros vaizdas - Numatytasis" msgid "Camera view - Top" msgstr "Kameros vaizdas - Viršus" msgid "Camera view - Bottom" msgstr "Kameros vaizdas - Apačia" msgid "Camera view - Front" msgstr "Kameros vaizdas - Priekis" msgid "Camera view - Behind" msgstr "Kameros vaizdas – iš galo" msgid "Camera Angle - Left side" msgstr "Kameros kampas – iš kairės" msgid "Camera Angle - Right side" msgstr "Kameros kampas – iš dešinės" msgid "Select all objects" msgstr "Pasirinkti visus objektus" msgid "Gizmo move" msgstr "Perkėlimo manipuliatorius" msgid "Gizmo rotate" msgstr "Pasukimo manipuliatorius" msgid "Gizmo scale" msgstr "Mastelio keitimo manipuliatorius" msgid "Gizmo place face on bed" msgstr "Paviršiaus dėjimo ant pagrindo manipuliatorius" msgid "Gizmo cut" msgstr "Pjovimo manipuliatorius" msgid "Gizmo mesh boolean" msgstr "Loginių tinklelio veiksmų (Boolean) manipuliatorius" msgid "Gizmo FDM paint-on fuzzy skin" msgstr "FDM užtepamo grublėto paviršiaus (fuzzy skin) manipuliatorius" msgid "Gizmo SLA support points" msgstr "SLA atramų taškų manipuliatorius" msgid "Gizmo FDM paint-on seam" msgstr "FDM užtepamos siūlės (seam) manipuliatorius" msgid "Gizmo text emboss/engrave" msgstr "Teksto iškėlimo ir įspaudimo (emboss/engrave) manipuliatorius" msgid "Gizmo measure" msgstr "Matavimo manipuliatorius" msgid "Gizmo assemble" msgstr "Surinkimo manipuliatorius" msgid "Gizmo brim ears" msgstr "Krašto „auselių“ (brim ears) manipuliatorius" msgid "Zoom in" msgstr "Padidinti" msgid "Zoom out" msgstr "Nutolinti" msgid "Toggle printable for object/part" msgstr "Perjungti objekto / dalies spausdinimą" # AI Translated msgctxt "Keyboard Shortcut" msgid "Tab" msgstr "Tab" msgid "Switch between Prepare/Preview" msgstr "Perjungimas tarp Paruošti / Peržiūrėti" # AI Translated msgctxt "Keyboard Shortcut" msgid "Space" msgstr "Tarpas" # AI Translated msgid "Open actions speed dial" msgstr "Atidaryti veiksmų greitosios prieigos meniu" msgid "Plater" msgstr "Plokštė" msgid "Move: press to snap by 1mm" msgstr "Perkėlimas: paspauskite, kad pritrauktumėte kas 1 mm" msgid "Support/Color Painting: adjust pen radius" msgstr "Atramų ir spalvų užtepimas: keisti teptuko spindulį" msgid "Support/Color Painting: adjust section position" msgstr "Atramų ir spalvų užtepimas: keisti pjūvio padėtį" msgid "Gizmo" msgstr "Manipuliatorius" msgid "Set extruder number for the objects and parts" msgstr "Nustatykite ekstruderio numerį objektams ir dalims" msgid "Delete objects, parts, modifiers" msgstr "Ištrinti objektus, dalis, modifikatorius" msgid "Select the object/part and press space to change the name" msgstr "Pasirinkite objektą ir (arba) dalį ir paspauskite tarpo klavišą, kad pakeistumėte pavadinimą" msgid "Mouse click" msgstr "Pelės paspaudimas" msgid "Select the object/part and mouse click to change the name" msgstr "Pasirinkite objektą/dalį ir spustelėkite pele, kad pakeistumėte pavadinimą" msgid "Objects List" msgstr "Objektų sąrašas" msgid "Vertical slider - Move active thumb Up" msgstr "Vertikalus slankiklis – kelti aktyvų žymeklį aukštyn" msgid "Vertical slider - Move active thumb Down" msgstr "Vertikalus slankiklis – nuleisti aktyvų žymeklį žemyn" msgid "Horizontal slider - Move active thumb Left" msgstr "Horizontalus slankiklis – stumti aktyvų žymeklį kairėn" msgid "Horizontal slider - Move active thumb Right" msgstr "Horizontalus slankiklis – stumti aktyvų žymeklį dešinėn" msgid "On/Off one layer mode of the vertical slider" msgstr "Vertikalaus slankiklio vieno sluoksnio režimas įjungimas / išjungimas" msgid "On/Off G-code window" msgstr "G-kodo lango įjungimas / išjungimas" msgid "Move slider 5x faster" msgstr "Judinkite slankiklį 5 kartus greičiau" # AI Translated msgctxt "Keyboard Shortcut" msgid "Home" msgstr "Home" msgid "Horizontal slider - Move to start position" msgstr "Horizontalus slankiklis – perkelti į pradinę padėtį" # AI Translated msgctxt "Keyboard Shortcut" msgid "End" msgstr "End" msgid "Horizontal slider - Move to last position" msgstr "Horizontalus slankiklis – perkelti į paskutinę padėtį" msgid "Release Note" msgstr "Versijos pastabos (Release notes)" #, c-format, boost-format msgid "version %s update information:" msgstr "versijos %s atnaujinimo informacija:" msgid "Network plug-in update" msgstr "Tinklo papildinio atnaujinimas" # AI Translated msgid "Click OK to update the Network plug-in now. If a file is in use, the update will be applied the next time Orca Slicer launches." msgstr "Spustelėkite Gerai, kad dabar atnaujintumėte tinklo papildinį. Jei failas naudojamas, atnaujinimas bus pritaikytas kitą kartą paleidus Orca Slicer." # AI Translated msgid "A new Network plug-in is available. Do you want to install it?" msgstr "Yra prieinamas naujas tinklo papildinys. Ar norite jį įdiegti?" #, c-format, boost-format msgid "A new Network plug-in (%s) is available. Do you want to install it?" msgstr "Yra naujas tinklo papildinys(%s), ar norite jį įdiegti?" msgid "New version of Orca Slicer" msgstr "Nauja \"Orca Slicer\" versija" msgid "Check on Microsoft Store" msgstr "Tikrinti „Microsoft Store“" msgid "Check on GitHub" msgstr "Tikrinti „GitHub“" msgid "Open Microsoft Store" msgstr "Atidaryti „Microsoft Store“" msgid "Skip this Version" msgstr "Praleisti šią versiją" #, c-format, boost-format msgid "New version available: %s. Please update OrcaSlicer from the Microsoft Store." msgstr "Pasirodė nauja versija: %s. Atnaujinkite „OrcaSlicer“ iš „Microsoft Store“." msgid "Confirm and Update Nozzle" msgstr "Patvirtinti ir atnaujinti purkštuką" msgid "Connect the printer using IP and access code" msgstr "Prijunkite spausdintuvą naudodami IP ir prieigos kodą" msgid "Try the following methods to update the connection parameters and reconnect to the printer." msgstr "Išbandykite šiuos būdus, kad atnaujintumėte ryšio parametrus ir vėl prisijungtumėte prie spausdintuvo." msgid "1. Please confirm Orca Slicer and your printer are in the same LAN." msgstr "1. Įsitikinkite, kad „Orca Slicer“ ir jūsų spausdintuvas yra tame pačiame vietiniame tinkle (LAN)." msgid "2. If the IP and Access Code below are different from the actual values on your printer, please correct them." msgstr "2. Jei žemiau nurodytas IP adresas ir prieigos kodas nesutampa su tikrosiomis spausdintuvo reikšmėmis, juos ištaisykite." msgid "3. Please obtain the device SN from the printer side; it is usually found in the device information on the printer screen." msgstr "3. Suraskite įrenginio serijos numerį (SN) spausdintuve; dažniausiai jis nurodomas įrenginio informacijos skiltyje, spausdintuvo ekrane." msgid "IP" msgstr "IP" msgid "Access Code" msgstr "Prieigos kodas" msgid "Printer model" msgstr "Spausdintuvo modelis" msgid "Printer name" msgstr "Spausdintuvo pavadinimas" msgid "Where to find your printer's IP and Access Code?" msgstr "Kur rasti spausdintuvo IP ir prieigos kodą?" # AI Translated msgid "How to trouble shooting" msgstr "Kaip diagnozuoti gedimus" msgid "Connect" msgstr "Jungtis" msgid "Manual Setup" msgstr "Rankinė sąranka" msgid "IP and Access Code Verified! You may close the window" msgstr "Patikrintas IP ir prieigos kodas! Galite uždaryti langą" msgid "connecting..." msgstr "jungiamasi..." msgid "Failed to connect to printer." msgstr "Nepavyko prisijungti prie spausdintuvo." msgid "Failed to publish login request." msgstr "Nepavyko paskelbti prisijungimo užklausos." msgid "The printer has already been bound." msgstr "Spausdintuvas jau yra susietas." msgid "The printer mode is incorrect, please switch to LAN Only." msgstr "Neteisingas spausdintuvo režimas, perjunkite į „Tik vietinis tinklas“ (LAN Only)." msgid "Connecting to printer... The dialog will close later" msgstr "Jungiamasi prie spausdintuvo... Šis langas netrukus užsidarys" msgid "Connection failed, please double check IP and Access Code" msgstr "Nepavyko prisijungti, dar kartą patikrinkite IP adresą ir prieigos kodą" msgid "" "Connection failed! If your IP and Access Code is correct, \n" "please move to step 3 for troubleshooting network issues" msgstr "" "Nepavyko prisijungti! Jei IP adresas ir prieigos kodas yra teisingi, \n" "pereikite prie 3 žingsnio tinklo problemoms šalinti." msgid "Connection failed! Please refer to the wiki page." msgstr "Nepavyko prisijungti! Informacijos ieškokite vikipedijos (wiki) puslapyje." msgid "sending failed" msgstr "siuntimas nepavyko" msgid "Failed to send. Click Retry to attempt sending again. If retrying does not work, please check the reason." msgstr "Nepavyko išsiųsti. Spustelėkite „Kartoti“, kad bandytumėte dar kartą. Jei tai nepadeda, patikrinkite priežastį." msgid "reconnect" msgstr "prisijungti iš naujo" msgid "Air Pump" msgstr "Oro siurblys" msgid "Laser 10W" msgstr "Laser 10W" msgid "Laser 40W" msgstr "Laser 40W" msgid "Cutting Module" msgstr "Pjovimo modulis" msgid "Auto Fire Extinguishing System" msgstr "Automatinė gaisro gesinimo sistema" # AI Translated msgid "Filament Track Switch" msgstr "Filament Track Switch" msgid "Beta" msgstr "Beta" msgid "Update firmware" msgstr "Atnaujinti programinę aparatinę įrangą" msgid "Beta version" msgstr "Beta versija" msgid "Updating" msgstr "Atnaujinama" msgid "Update failed" msgstr "Atnaujinti nepavyko" msgid "Update successful" msgstr "Atnaujinimas sėkmingas" # AI Translated msgid "Hotends on Rack" msgstr "Kaitinimo blokai stove" msgid "Are you sure you want to update? This will take about 10 minutes. Do not turn off the power while the printer is updating." msgstr "Ar tikrai norite atnaujinti? Tai užtruks apie 10 minučių. Neišjunkite maitinimo, kol spausdintuvas atnaujinamas." msgid "An important update was detected and needs to be run before printing can continue. Do you want to update now? You can also update later from 'Update firmware'." msgstr "Buvo aptiktas svarbus atnaujinimas, kurį reikia paleisti, kad spausdinimas būtų tęsiamas. Ar norite atnaujinti dabar? Taip pat galite atnaujinti vėliau, naudodami \"Atnaujinti programinę įrangą\"." msgid "The firmware version is abnormal. Repairing and updating are required before printing. Do you want to update now? You can also update later on the printer or update next time you start Orca Slicer." msgstr "Įterptinės programinės įrangos versija yra nenormali. Prieš spausdinant reikia pataisyti ir atnaujinti. Ar norite atnaujinti dabar? Taip pat galite atnaujinti vėliau spausdintuve arba atnaujinti kitą kartą paleisdami \"OrcaSlicer\"." msgid "Extension Board" msgstr "Išplėtimo plokštė" #, boost-format msgid "Split into %1% parts" msgstr "Padalinti į %1% dalių" msgid "Repair finished" msgstr "Taisymas baigtas" msgid "Repair failed" msgstr "Taisymas nepavyko" msgid "Repair canceled" msgstr "Taisymas atšauktas" #, boost-format msgid "Copying of file %1% to %2% failed: %3%" msgstr "Failo %1% kopijavimas į %2% nepavyko: %3%" msgid "Please check any unsaved changes before updating the configuration." msgstr "Prieš atnaujinant konfigūraciją reikia patikrinti neišsaugotus pakeitimus." msgid "Configuration package: " msgstr "Konfigūracijos paketas: " msgid " updated to " msgstr " atnaujintas į " msgid "Open G-code file:" msgstr "Atidaryti G-kodo failą:" msgid "One object has an empty first layer and can't be printed. Please Cut the bottom or enable supports." msgstr "Vienas objektas turi tuščią pradinį sluoksnį ir jo negalima spausdinti. Iškirpkite apačią arba įjunkite atramas." #, boost-format msgid "The object has empty layers between %1% and %2% and can’t be printed." msgstr "Objekte yra tuščių sluoksnių tarp %1% ir %2%, todėl jo atspausdinti neįmanoma." #, boost-format msgid "Object: %1%" msgstr "Objektas: %1%" msgid "Parts of the object at these heights may be too thin or the object may have a faulty mesh." msgstr "Objekto dalys šiame aukštyje gali būti per plonos arba objektas gali turėti defektų tinklelį." msgid "Process change extrusion role G-code" msgstr "Proceso keitimo ekstruzijos vaidmens G-kodas" msgid "Filament change extrusion role G-code" msgstr "Gijos keitimo ekstruzijos vaidmens G-kodas" msgid "No object can be printed. It may be too small." msgstr "Negalima spausdinti jokio objekto. Jis gali būti per mažas." msgid "Your print is very close to the priming regions. Make sure there is no collision." msgstr "Jūsų spaudinys yra labai arti valymo / paruošimo (priming) sričių. Įsitikinkite, kad nekils susidūrimo." msgid "" "Failed to generate G-code for invalid custom G-code.\n" "\n" msgstr "" "Nepavyko sugeneruoti G-kodo dėl neteisingo pasirinktinio G-kodo.\n" "\n" msgid "Please check the custom G-code or use the default custom G-code." msgstr "Patikrinkite pasirinktinį G-kodą arba naudokite numatytąjį pasirinktinį G-kodą." #, boost-format msgid "Generating G-code: layer %1%" msgstr "G-kodo generavimas: sluoksnis %1%" msgid "Flush volumes matrix do not match to the correct size!" msgstr "Išmetimo tūrių matrica (flush volumes matrix) neatitinka reikiamo dydžio!" msgid "set_accel_and_jerk() is only supported by Klipper" msgstr "„set_accel_and_jerk()“ funkcija palaikoma tik „Klipper“ programinėje aparatinėje įrangoje" msgid "" "Input shaping is not supported by Marlin < 2.1.2.\n" "Check your firmware version and update your G-code flavor to ´Marlin 2´." msgstr "" "„Input shaping“ funkcija nepalaikoma „Marlin“ versijose, senesnėse nei 2.1.2.\n" "Patikrinkite savo programinės aparatinės įrangos versiją ir atnaujinkite G-kodo tipą (G-code flavor) į „Marlin 2“." msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2." msgstr "„Input shaping“ funkcija palaikoma tik „Klipper“, „RepRapFirmware“ ir „Marlin 2“ programinėje aparatinėje įrangoje" msgid "Grouping error: " msgstr "Grupavimo klaida: " msgid " can not be placed in the " msgstr "negali būti įkeltas į " # AI Translated msgid "Group error in manual mode. Please check nozzle count or regroup." msgstr "Grupavimo klaida rankiniame režime. Patikrinkite purkštukų skaičių arba pergrupuokite." msgid "Internal Bridge" msgstr "Vidinis tiltas" msgid "undefined error" msgstr "neapibrėžta klaida" msgid "too many files" msgstr "per daug failų" msgid "File too large" msgstr "Per didelis failas" msgid "unsupported method" msgstr "nepalaikomas metodas" msgid "unsupported encryption" msgstr "nepalaikomas šifravimas" msgid "unsupported feature" msgstr "nepalaikoma funkcija" msgid "failed finding central directory" msgstr "nepavyko rasti centrinio katalogo" msgid "not a ZIP archive" msgstr "ne ZIP archyvas" msgid "invalid header or corrupted" msgstr "negaliojanti arba sugadinta antraštė" msgid "Saving to RAID is not supported." msgstr "Saugojimas į RAID masyvą nepalaikomas" msgid "decompression failed" msgstr "dekompresija nepavyko" msgid "compression failed" msgstr "suspaudimas nepavyko" msgid "unexpected decompressed size" msgstr "netikėtas dekompresuotas (išskleistas) dydis" msgid "CRC check failed" msgstr "CRC patikra nepavyko" msgid "unsupported central directory size" msgstr "nepalaikomas centrinio katalogo dydis" msgid "allocation failed" msgstr "paskirstymas nepavyko" msgid "file open failed" msgstr "nepavyko atverti failo" msgid "file create failed" msgstr "nepavyko sukurti failo" msgid "file write failed" msgstr "nepavyko įrašyti failo" msgid "file read failed" msgstr "nepavyko nuskaityti failo" msgid "file close failed" msgstr "nepavyko uždaryti failo" msgid "file seek failed" msgstr "failo paieška nepavyko" msgid "file stat failed" msgstr "failo statistika nepavyko" msgid "invalid parameter" msgstr "neteisingas parametras" msgid "invalid filename" msgstr "neteisingas failo pavadinimas" msgid "Buffer too small" msgstr "Per mažas buferis" msgid "internal error" msgstr "vidinė klaida" msgid "file not found" msgstr "failas nerastas" msgid "Archive too large" msgstr "Per didelis archyvas" msgid "validation failed" msgstr "patvirtinimas nepavyko" msgid "write callback failed" msgstr "nepavyko vykdyti įrašymo atgalinio iškvietimo (write callback)" #, boost-format msgid "%1% is too close to exclusion area. There may be collisions when printing." msgstr "%1% yra per arti uždraustos srities, spausdinant gali įvykti susidūrimų." #, boost-format msgid "%1% is too close to others, and collisions may be caused." msgstr "%1% yra per arti kitų, todėl gali įvykti susidūrimas." #, boost-format msgid "%1% is too tall, and collisions will be caused." msgstr "%1% yra per aukštas, todėl įvyks susidūrimai." msgid " is too close to exclusion area, there may be collisions when printing." msgstr " yra per arti uždraustosios zonos, spausdinant gali įvykti susidūrimų." msgid " is too close to clumping detection area, there may be collisions when printing." msgstr " yra per arti sulipimo aptikimo (clumping detection) zonos, spausdinant gali įvykti susidūrimų." msgid "Prime Tower" msgstr "Valymo bokštas (Prime tower)" msgid " is too close to others, and collisions may be caused.\n" msgstr " yra per arti kitų, todėl gali įvykti susidūrimai.\n" msgid " is too close to an exclusion area, and collisions will be caused.\n" msgstr " yra per arti uždraustosios zonos, todėl įvyks susidūrimai.\n" msgid " is too close to clumping detection area, and collisions will be caused.\n" msgstr "" " yra per arti sulipimo aptikimo zonos, todėl įvyks susidūrimai.\n" "\n" msgid "Selected nozzle temperatures are incompatible. Each filament's nozzle temperature must fall within the recommended nozzle temperature range of the other filaments. Otherwise, nozzle clogging or printer damage may occur." msgstr "Pasirinktos purkštuko temperatūros yra nesuderinamos. Kiekvienos gijos purkštuko temperatūra turi patekti į kitų gijų rekomenduojamos temperatūros diapazoną. Priešingu atveju gali užsikimšti purkštukas arba sugesti spausdintuvas." msgid "Invalid recommended nozzle temperature range. The lower bound must be lower than the upper bound." msgstr "Neteisingas rekomenduojamas purkštuko temperatūros diapazonas. Žemutinė riba turi būti mažesnė už viršutinę ribą." msgid "If you still want to print, you can enable the option in Preferences / Control / Slicing / Remove mixed temperature restriction." msgstr "Jei vis tiek norite spausdinti, galite įjungti šią parinktį skiltyje Nuostatos (Preferences) / Valdymas / Pjaustymas / Pašalinti mišrios temperatūros ribojimą." msgid "No extrusions under current settings." msgstr "Pagal dabartinius nustatymus nėra išspaudimų." msgid "Smooth mode of timelapse is not supported when \"by object\" sequence is enabled." msgstr "Sklandus pakadrinio filmavimo (timelapse) režimas nepalaikomas, kai įjungta spausdinimo seka „pagal objektą“." msgid "Clumping detection is not supported when \"by object\" sequence is enabled." msgstr "Sulipimo aptikimas (clumping detection) nepalaikomas, kai įjungta spausdinimo seka „pagal objektą“." msgid "Enabling both precise Z height and the prime tower may cause slicing errors." msgstr "Vienu metu įjungus tikslų Z aukštį ir valymo bokštą, gali kilti pjaustymo klaidų." msgid "A prime tower is required for clumping detection; otherwise, there may be flaws on the model." msgstr "Sulipimo aptikimui reikalingas valymo bokštas, kitaip modelio paviršiuje gali atsirasti defektų." msgid "Please select \"By object\" print sequence to print multiple objects in spiral vase mode." msgstr "Pasirinkite spausdinimo seką \"Pagal objektą\", jei norite spausdinti kelis objektus spiralinės vazos režimu." msgid "Spiral (vase) mode does not work when an object contains more than one material." msgstr "Spiralinės vazos režimas neveikia, kai objekte yra daugiau nei viena medžiaga." #, boost-format msgid "While the object %1% itself fits the build volume, it exceeds the maximum build volume height because of material shrinkage compensation." msgstr "Nors pats objektas %1% telpa į surinkimo tūrį, jis viršija maksimalų surinkimo tūrio aukštį dėl medžiagos susitraukimo kompensavimo." #, boost-format msgid "The object %1% exceeds the maximum build volume height." msgstr "Objektas %1% viršija maksimalų galimą spausdinimo tūrio aukštį." #, boost-format msgid "While the object %1% itself fits the build volume, its last layer exceeds the maximum build volume height." msgstr "Nors pats objektas %1% telpa į spausdinimo tūrį, jo paskutinis sluoksnis viršija didžiausią spausdinimo tūrio aukštį." msgid "You might want to reduce the size of your model or change current print settings and retry." msgstr "Galbūt norėsite sumažinti modelio dydį arba pakeisti esamus spausdinimo nustatymus ir bandyti dar kartą." msgid "Variable layer height is not supported with Organic supports." msgstr "Kintamas sluoksnio aukštis nepalaikomas su \" Organinėmis atramomis\"." msgid "Different nozzle diameters and different filament diameters may not work well when the prime tower is enabled. It's very experimental, so please proceed with caution." msgstr "Skirtingo skersmens purkštukai ir skirtingo skersmens gijos gali neveikti gerai, kai įjungtas valymo bokštas. Tai labai eksperimentinė priemonė, todėl elkitės atsargiai." msgid "The Wipe Tower is currently only supported with the relative extruder addressing (use_relative_e_distances=1)." msgstr "Valymo bokštas šiuo metu palaikomas tik naudojant santykinį ekstruderio adresą (use_relative_e_distances=1)." msgid "Ooze prevention is only supported with the wipe tower when 'single_extruder_multi_material' is off." msgstr "Varvėjimo prevencija palaikoma tik su valymo bokštu, kai funkcija „single_extruder_multi_material“ yra išjungta." msgid "The prime tower is currently only supported for the Marlin, RepRap/Sprinter, RepRapFirmware and Repetier G-code flavors." msgstr "Valymo bokštas (Prime tower) šiuo metu palaikomas tik su „Marlin“, „RepRap/Sprinter“, „RepRapFirmware“ ir „Repetier“ G-kodo tipais." msgid "A prime tower is not supported in “By object” print." msgstr "Valymo bokštas nepalaikomas spausdinant seka „Pagal objektą“." msgid "A prime tower is not supported when adaptive layer height is on. It requires that all objects have the same layer height." msgstr "Valymo bokštas nepalaikomas, kai įjungtas adaptyvusis sluoksnio aukštis. Visi objektai privalo turėti vienodą sluoksnio aukštį." msgid "A prime tower requires any “support gap” to be a multiple of layer height." msgstr "Valymo bokštui reikia, kad „atramos tarpas“ (support gap) būtų sluoksnio aukščio kartotinis." msgid "A prime tower requires that all objects have the same layer height." msgstr "Valymo bokštui reikia, kad visų objektų sluoksnio aukštis būtų vienodas" msgid "A prime tower requires that all objects are printed over the same number of raft layers." msgstr "Valymo bokštui reikia, kad visi objektai būtų spausdinami ant vienodo skaičiaus platformos sluoksnių." msgid "The prime tower is only supported for multiple objects if they are printed with the same support_top_z_distance." msgstr "Valymo bokštas keliems objektams palaikomas tik tada, jei jie spausdinami su vienodu „support_top_z_distance“ parametru." msgid "A prime tower requires that all objects are sliced with the same layer height." msgstr "Valymo bokštui reikia, kad visi objektai būtų supjaustyti vienodu sluoksnių aukščiu." msgid "The prime tower is only supported if all objects have the same variable layer height." msgstr "Valymo bokštas palaikomas tik tada, kai visi objektai turi vienodą kintamą sluoksnio aukštį." msgid "One or more object were assigned an extruder that the printer does not have." msgstr "Vienas ar daugiau objektų buvo priskirti ekstruderiui, kurio spausdintuvas neturi." msgid "Line width too small" msgstr "Per mažas linijos plotis" msgid "Line width too large" msgstr "Per didelis linijos plotis" msgid "Printing with multiple extruders of differing nozzle diameters. If support is to be printed with the current filament (support_filament == 0 or support_interface_filament == 0), all nozzles have to be of the same diameter." msgstr "Spausdinti su keliais skirtingo skersmens purkštukais. Jei atrama turi būti spausdinama su dabartine gija (support_filament == 0 arba support_interface_filament == 0), visi purkštukai turi būti vienodo skersmens." msgid "A prime tower requires that support has the same layer height as the object." msgstr "Valymo bokštui reikia, kad atramų ir objekto sluoksnių aukščiai sutaptų." msgid "For Organic supports, two walls are supported only with the Hollow/Default base pattern." msgstr "Naudojant organines atramas, dvi sienelės palaikomos tik su tuščiaviduriu arba numatytuoju pagrindo raštu (Hollow/Default)." msgid "The Lightning base pattern is not supported by this support type; Rectilinear will be used instead." msgstr "Žaibo (Lightning) pagrindo raštas nepalaikomas šio atramos tipo; vietoj jo bus naudojamas tiesialinis (Rectilinear)." msgid "Organic support tree tip diameter must not be smaller than support material extrusion width." msgstr "Organinio atraminio medžio viršūnės skersmuo turi būti ne mažesnis už atraminės medžiagos ekstruzijos plotį." msgid "Organic support branch diameter must not be smaller than 2x support material extrusion width." msgstr "Organinės atraminės šakos skersmuo turi būti ne mažesnis nei dvigubas (2x) atraminės medžiagos ekstruzijos plotis." msgid "Organic support branch diameter must not be smaller than support tree tip diameter." msgstr "Organinės atraminės šakos skersmuo neturi būti mažesnis už atraminio medžio viršūnės skersmenį." msgid "The Hollow base pattern is not supported by this support type; Rectilinear will be used instead." msgstr "Tuščiaviduris (Hollow) pagrindo raštas nepalaikomas šio atramos tipo; vietoj jo bus naudojamas tiesialinis (Rectilinear)." msgid "Support enforcers are used but support is not enabled. Please enable support." msgstr "Naudojamos priverstinės atramos, tačiau atramų funkcija išjungta. Įjunkite atramas." msgid "Layer height cannot exceed nozzle diameter." msgstr "Sluoksnio aukštis negali viršyti purkštuko skersmens." msgid "Bridge line width must not exceed nozzle diameter" msgstr "Tiltelių linijos plotis negali viršyti purkštuko skersmens" msgid "\"G92 E0\" was found in before_layer_change_gcode, but the G or E are not uppercase. Please change them to the exact uppercase \"G92 E0\"." msgstr "Komanda „G92 E0“ rasta prieš sluoksnio keitimą vykdomame G-kode (before_layer_change_gcode), tačiau raidės G arba E nėra didžiosios. Pakeiskite jas tiksliai į didžiąsias raides: „G92 E0“." msgid "\"G92 E0\" was found in layer_change_gcode, but the G or E are not uppercase. Please change them to the exact uppercase \"G92 E0\"." msgstr "Komanda „G92 E0“ rasta sluoksnio keitimo G-kode (layer_change_gcode), tačiau raidės G arba E nėra didžiosios. Pakeiskite jas tiksliai į didžiąsias raides: „G92 E0“." msgid "Relative extruder addressing requires resetting the extruder position at each layer to prevent loss of floating point accuracy. Add \"G92 E0\" to layer_gcode." msgstr "Tam, kad neprarastų slankiojo kablelio tikslumo, santykinis ekstruderio adresavimas reikalauja kiekviename sluoksnyje iš naujo nustatyti ekstruderio padėtį. Pridėkite „G92 E0“ prie layer_gcode." msgid "\"G92 E0\" was found in before_layer_change_gcode, which is incompatible with absolute extruder addressing." msgstr "Komanda „G92 E0“ rasta prieš sluoksnio keitimą vykdomame G-kode (before_layer_change_gcode), o tai nesuderinama su absoliučiuoju ekstruderio adresavimu." msgid "\"G92 E0\" was found in layer_change_gcode, which is incompatible with absolute extruder addressing." msgstr "Komanda „G92 E0“ rasta sluoksnio keitimo G-kode (layer_change_gcode), o tai nesuderinama su absoliučiuoju ekstruderio adresavimu." #, c-format, boost-format msgid "Plate %d: %s does not support filament %s" msgstr "Plokštė %d: %s nepalaiko %s gijos" msgid "Setting the jerk speed too low could lead to artifacts on curved surfaces" msgstr "Nustačius per mažą tolygumo pasikeitimo (jerk) greitį, lenktuose paviršiuose gali atsirasti defektų (artefaktų)" msgid "" "The jerk setting exceeds the printer's maximum jerk (machine_max_jerk_x/machine_max_jerk_y).\n" "Orca will automatically cap the jerk speed to ensure it doesn't surpass the printer's capabilities.\n" "You can adjust the maximum jerk setting in your printer's configuration to get higher speeds." msgstr "" "Tolygumo pasikeitimo (jerk) nustatymas viršija spausdintuvo maksimalią reikšmę (machine_max_jerk_x/machine_max_jerk_y).\n" "„Orca“ automatiškai apribos šį greitį, kad jis neviršytų spausdintuvo galimybių.\n" "Norėdami pasiekti didesnį greitį, spausdintuvo konfigūracijoje galite pakoreguoti maksimalaus „jerk“ parametro reikšmes." msgid "" "Junction deviation setting exceeds the printer's maximum value (machine_max_junction_deviation).\n" "Orca will automatically cap the junction deviation to ensure it doesn't surpass the printer's capabilities.\n" "You can adjust the machine_max_junction_deviation value in your printer's configuration to get higher limits." msgstr "" "Sąsajos nuokrypis viršija spausdintuvo maksimalią vertę (machine_max_junction_deviation).\n" "Orca automatiškai apribos sąsajos nuokrypį, kad jis neviršytų spausdintuvo galimybių.\n" "Galite koreguoti machine_max_junction_deviation vertę spausdintuvo konfigūracijoje, kad gautumėte didesnes ribas." msgid "" "The acceleration setting exceeds the printer's maximum acceleration (machine_max_acceleration_extruding).\n" "Orca will automatically cap the acceleration speed to ensure it doesn't surpass the printer's capabilities.\n" "You can adjust the machine_max_acceleration_extruding value in your printer's configuration to get higher speeds." msgstr "" "Nustatytas pagreitis viršija maksimalų spausdintuvo pagreitį (machine_max_acceleration_extruding).\n" "Orca automatiškai apribos pagreitį, kad jis neviršytų spausdintuvo galimybių.\n" "Norėdami pasiekti didesnį greitį, spausdintuvo konfigūracijoje galite pakoreguoti machine_max_acceleration_extruding reikšmę." msgid "" "The travel acceleration setting exceeds the printer's maximum travel acceleration (machine_max_acceleration_travel).\n" "Orca will automatically cap the travel acceleration speed to ensure it doesn't surpass the printer's capabilities.\n" "You can adjust the machine_max_acceleration_travel value in your printer's configuration to get higher speeds." msgstr "" "Judėjimo pagreičio nustatymas viršija didžiausią spausdintuvo judėjimo pagreitį (machine_max_acceleration_travel).\n" "Orca automatiškai apribos judėjimo pagreitį, kad jis neviršytų spausdintuvo galimybių.\n" "Norėdami pasiekti didesnį greitį, spausdintuvo konfigūracijoje galite pakoreguoti machine_max_acceleration_travel reikšmę." msgid "The precise wall option will be ignored for outer-inner or inner-outer-inner wall sequences." msgstr "Tikslios sienelės (precise wall) parinktis bus ignoruojama esant išorinės–vidinės arba vidinės–išorinės–vidinės sienelių spausdinimo sekai." msgid "The Adaptive Pressure Advance model for one or more extruders may contain invalid values." msgstr "Vieno ar kelių ekstruderių „Adaptive Pressure Advance“ modelis gali turėti netinkamų reikšmių." msgid "Filament shrinkage will not be used because filament shrinkage for the used filaments does not match." msgstr "Gijų susitraukimas nenaudojamas, nes naudojamų gijų susitraukimas labai skiriasi." msgid "Generating skirt & brim" msgstr "Generuojamas apvadas ir kraštas" msgid "" "Per-object skirts cannot fit between the objects in By object print sequence.\n" "\n" "Move the objects farther apart, reduce brim/skirt size, switch Skirt type to Combined, or switch Print sequence to By layer." msgstr "" "Kiekvienam objektui atskiri apvadai (skirts) netelpa tarp objektų, kai pasirinkta spausdinimo seka „Pagal objektą“.\n" "\n" "Patraukite objektus toliau vienas nuo kito, sumažinkite krašto / apvado (brim/skirt) dydį, pakeiskite apvado tipą į „Kombinuotas“ arba pakeiskite spausdinimo seką į „Pagal sluoksnį“." msgid "Exporting G-code" msgstr "Eksportuojamas G-kodas" msgid "Generating G-code" msgstr "Generuojamas G-kodas" msgid "Processing of the filename_format template failed." msgstr "Nepavyko apdoroti šablono filename_format." msgid "Printer technology" msgstr "Spausdintuvo technologija" msgid "Printable area" msgstr "Spausdinama sritis" msgid "Extruder printable area" msgstr "Ekstruderio spausdinimo sritis" msgid "Support parallel printheads" msgstr "Lygiagrečių spausdinimo galvučių palaikymas" msgid "Enable printer settings for machines that can use multiple printheads in parallel." msgstr "Įjungti spausdintuvo nustatymus įrenginiams, kurie gali lygiagrečiai naudoti kelias spausdinimo galvutes." msgid "Parallel printheads count" msgstr "Lygiagrečių spausdinimo galvučių skaičius" msgid "Set the number of parallel printheads for machines like OrangeStorm Giga printer." msgstr "Nustatykite lygiagrečių spausdinimo galvučių skaičių tokiems įrenginiams kaip „OrangeStorm Giga“ spausdintuvas." msgid "Parallel printheads bed exclude areas" msgstr "Nespausdinamos pagrindo sritys esant lygiagrečioms spausdinimo galvutėms" msgid "Ordered list of bed exclude areas by parallel printhead count. Item 1 applies to one printhead, item 2 to two printheads, and so on. Leave an item empty for no excluded area." msgstr "Rūšiuotas nespausdinamų pagrindo sričių sąrašas pagal lygiagrečių spausdinimo galvučių skaičių. 1 punktas taikomas vienai spausdinimo galvutei, 2 punktas – dviem spausdinimo galvutėms ir t. t. Palikite laukelį tuščią, jei ribojamos srities nėra." msgid "Excluded bed area" msgstr "Nespausdinama pagrindo sritis" msgid "Unprintable area in XY plane. For example, X1 Series printers use the front left corner to cut filament during filament change. The area is expressed as polygon by points in following format: \"XxY, XxY, ...\"" msgstr "Nespausdinama sritis XY plokštumoje. Pavyzdžiui, X1 serijos spausdintuvuose priekinis kairysis kampas naudojamas gijai nupjauti keičiant giją. Plotas išreiškiamas taškų daugiakampiu toliau nurodytu formatu: \"XxY, XxY, ...\"" msgid "Bed custom texture" msgstr "Pasirinktinė pagrindo tekstūra" msgid "Bed custom model" msgstr "Pasirinktinis pagrindo modelis" msgid "Elephant foot compensation" msgstr "Dramblio pėdos kompensacija" msgid "This shrinks the first layer on the build plate to compensate for elephant foot effect." msgstr "Sumažinti pradinį sluoksnį ant pagrindo, kad būtų kompensuotas dramblio pėdos efektas" msgid "Elephant foot compensation layers" msgstr "Dramblio pėdos kompensavimo sluoksniai" msgid "The number of layers on which the elephant foot compensation will be active. The first layer will be shrunk by the elephant foot compensation value, then the next layers will be linearly shrunk less, up to the layer indicated by this value." msgstr "Sluoksnių, kuriuose veiks dramblio pėdos kompensavimas, skaičius. Pirmasis sluoksnis bus sumažintas pagal dramblio pėdos kompensavimo vertę, tada kiti sluoksniai bus tiesiškai mažinami mažiau, iki šia verte nurodyto sluoksnio." msgid "Elephant foot layers density" msgstr "Dramblio pėdos sluoksnių tankis" msgid "" "Density of internal solid infill for Elephant foot layers compensation.\n" "The initial value for the second layer is set.\n" "Subsequent layers become linearly denser by the height specified in elefant_foot_compensation_layers." msgstr "" "Vidinio vientiso užpildo (solid infill) tankis dramblio pėdos sluoksnių kompensavimui.\n" "Nustatoma pradinė vertė antrajam sluoksniui.\n" "Tolesni sluoksniai tiesiškai tankėja iki aukščio, nurodyto „elefant_foot_compensation_layers“ parametre." msgid "This is the height for each layer. Smaller layer heights give greater accuracy but longer printing time." msgstr "Tai kiekvieno sluoksnio aukštis. Mažesnis sluoksnio aukštis užtikrina didesnį tikslumą, bet pailgina spausdinimo laiką." msgid "Printable height" msgstr "Spausdinamas aukštis" msgid "This is the maximum printable height which is limited by the height of the build area." msgstr "Tai didžiausias spausdinamas aukštis, kurį riboja spausdinimo zonos aukštis." msgid "Extruder printable height" msgstr "Ekstruderio spausdinimo aukštis" msgid "Maximum printable height of this extruder which is limited by mechanism of printer." msgstr "Maksimalus šio ekstruderio spausdinimo aukštis, kurį riboja spausdintuvo mechanika." msgid "Preferred orientation" msgstr "Pageidautina orientacija" msgid "Automatically orient STL files on the Z axis upon initial import." msgstr "Automatiškai orientuoti STL failus pagal Z ašį pradinio importo metu." msgid "Printer preset names" msgstr "Spausdintuvo profilių pavadinimai" msgid "Use 3rd-party print host" msgstr "Naudokite trečiosios šalies spausdinimo prieglobą" msgid "Allow controlling BambuLab's printer through 3rd party print hosts." msgstr "Leisti valdyti „BambuLab“ spausdintuvą per trečiųjų šalių spausdinimo serverius." msgid "Use 3MF instead of G-code" msgstr "Vietoj G-kodo naudoti 3MF" msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file." msgstr "Įjunkite, jei spausdintuvas spausdinimo užduotims priima 3MF failus. Kai įjungta, „Orca Slicer“ sugeneruotą failą siunčia kaip „.gcode.3mf“, o ne kaip paprastą „.gcode“ failą." msgid "Printer Agent" msgstr "Spausdintuvo agentas" msgid "Select the network agent implementation for printer communication." msgstr "Pasirinkite tinklo agento modulį ryšiui su spausdintuvu palaikyti." msgid "Hostname, IP or URL" msgstr "Mazgo (host) pavadinimas, IP arba URL" msgid "Orca Slicer can upload G-code files to a printer host. This field should contain the hostname, IP address or URL of the printer host instance. Print host behind HAProxy with basic auth enabled can be accessed by putting the user name and password into the URL in the following format: https://username:password@your-octopi-address/" msgstr "„Orca Slicer“ gali įkelti G-kodo failus į spausdinimo serverį (host). Šiame lauke turi būti nurodytas serverio mazgo pavadinimas, IP adresas arba URL. Spausdinimo serverį, esantį už „HAProxy“ su įjungta bazine autentifikacija, galima pasiekti įrašant naudotojo vardą ir slaptažodį į URL tokiu formatu: https://naudotojas:slaptažodis@jūsų-octopi-adresas/" msgid "Device UI" msgstr "Įrenginio sąsaja" msgid "Specify the URL of your device user interface if it's not same as print_host." msgstr "Nurodykite įrenginio naudotojo sąsajos URL, jei jis nesutampa su „print_host“." msgid "API Key / Password" msgstr "API raktas / slaptažodis" msgid "Orca Slicer can upload G-code files to a printer host. This field should contain the API Key or the password required for authentication." msgstr "\"Orca Slicer\" gali įkelti G-kodo failus į spausdintuvą. Šiame lauke turėtų būti nurodytas API raktas arba autentifikavimui reikalingas slaptažodis." msgid "Serial Number" msgstr "Serijos numeris" msgid "Flashforge local API requires the printer serial number." msgstr "Vietinei „Flashforge“ API reikalingas spausdintuvo serijos numeris." msgid "Name of the printer." msgstr "Spausdintuvo pavadinimas." msgid "HTTPS CA File" msgstr "HTTPS CA failas" msgid "Custom CA certificate file can be specified for HTTPS OctoPrint connections, in crt/pem format. If left blank, the default OS CA certificate repository is used." msgstr "Pasirinktinis CA sertifikato failas gali būti nurodytas HTTPS OctoPrint ryšiams crt/pem formatu. Jei paliekama tuščia, naudojama numatytoji OS CA sertifikatų saugykla." msgid "User" msgstr "Naudotojas" msgid "Password" msgstr "Slaptažodis" msgid "Ignore HTTPS certificate revocation checks" msgstr "Nepaisyti HTTPS sertifikato atšaukimo patikrų" msgid "Ignore HTTPS certificate revocation checks in the case of missing or offline distribution points. One may want to enable this option for self signed certificates if connection fails." msgstr "Nepaisyti HTTPS sertifikato atšaukimo patikrų, jei paskirstymo taškų trūksta arba jie neprisijungę. Jei nepavyksta prisijungti, galite įjungti šią parinktį savarankiškai pasirašytiems sertifikatams." msgid "Names of presets related to the physical printer." msgstr "Su fiziniu spausdintuvu susijusių profilių pavadinimai." msgid "Authorization Type" msgstr "Autentifikavimo tipas" msgid "API key" msgstr "API raktas" msgid "HTTP digest" msgstr "HTTP Digest autentifikacija" # AI Translated msgid "Configuration for the plugin capabilities this preset uses, overriding the global Capabilities configuration. Stored as a raw JSON array and edited through the dialog behind the button, never typed in directly." msgstr "Šio profilio naudojamų papildinių galimybių konfigūracija, nustelbianti bendrąją galimybių konfigūraciją. Saugoma kaip neapdorotas JSON masyvas ir redaguojama per dialogo langą už mygtuko, o ne įvedama tiesiogiai." msgid "Avoid crossing walls" msgstr "Vengti sienelių kirtimo" msgid "This detours to avoid traveling across walls, which may cause blobs on the surface." msgstr "Formuoti apylankas, kad judant nebūtų kertamos sienelės – taip išvengiama apnašų (blobs) ant modelio paviršiaus." msgid "Avoid crossing walls - Max detour length" msgstr "Vengti sienelių kirtimo – maks. apylankos ilgis" msgid "Maximum detour distance for avoiding crossing wall: The printer won't detour if the detour distance is larger than this value. Detour length could be specified either as an absolute value or as percentage (for example 50%) of a direct travel path. A value of 0 will disable this." msgstr "Maksimalus apylankos atstumas sienelių kirtimui išvengti. Apylanka nedaroma, jei jos atstumas viršija šią reikšmę. Apylankos ilgis gali būti nurodomas absoliučia verte arba procentais (pavyzdžiui, 50 %) nuo tiesioginio judėjimo trajektorijos. Įrašius 0 – funkcija išjungiama." msgid "mm or %" msgstr "mm arba %" msgid "Other layers" msgstr "Kiti sluoksniai" msgid "Bed temperature for layers except the initial one. A value of 0 means the filament does not support printing on the Cool Plate SuperTack." msgstr "Pagrindo temperatūra visiems sluoksniams, išskyrus pirmąjį. Reikšmė 0 reiškia, kad ši gija nepritaikyta spausdinti ant „Cool Plate SuperTack“ pagrindo." msgid "This is the bed temperature for layers except for the first one. A value of 0 means the filament does not support printing on the Cool Plate." msgstr "Pagrindo temperatūra visiems sluoksniams, išskyrus pirmąjį. Reikšmė 0 reiškia, kad ši gija nepritaikyta spausdinti ant šalto pagrindo (Cool Plate)." msgid "This is the bed temperature for layers except for the first one. A value of 0 means the filament does not support printing on the Textured Cool Plate." msgstr "Sluoksnių, išskyrus pradinį, pagrindo temperatūra. Reikšmė 0 reiškia, kad gija neleidžia spausdinti ant Tekstūruotos šaltos plokštės." msgid "This is the bed temperature for layers except for the first one. A value of 0 means the filament does not support printing on the Engineering Plate." msgstr "Pagrindo temperatūra visiems sluoksniams, išskyrus pirmąjį. Reikšmė 0 reiškia, kad ši gija nepritaikyta spausdinti ant inžinerinio pagrindo (Engineering Plate)." msgid "This is the bed temperature for layers except for the first one. A value of 0 means the filament does not support printing on the High Temp Plate." msgstr "Pagrindo temperatūra visiems sluoksniams, išskyrus pirmąjį. Reikšmė 0 reiškia, kad ši gija nepritaikyta spausdinti ant aukštos temperatūros pagrindo (High Temp Plate)." msgid "This is the bed temperature for layers except for the first one. A value of 0 means the filament does not support printing on the Textured PEI Plate." msgstr "Pagrindo temperatūra visiems sluoksniams, išskyrus pirmąjį. Reikšmė 0 reiškia, kad ši gija nepritaikyta spausdinti ant tekstūruoto PEI pagrindo (Textured PEI Plate)." msgid "First layer" msgstr "Pirmasis sluoksnis" msgid "First layer bed temperature" msgstr "Pirmojo sluoksnio pagrindo temperatūra" msgid "This is the bed temperature of the first layer. A value of 0 means the filament does not support printing on the Cool Plate SuperTack." msgstr "Pirmojo sluoksnio pagrindo temperatūra. Reikšmė 0 reiškia, kad ši gija nepritaikyta spausdinti ant „Cool Plate SuperTack“ pagrindo." msgid "This is the bed temperature of the first layer. A value of 0 means the filament does not support printing on the Cool Plate." msgstr "Pirmojo sluoksnio pagrindo temperatūra. Reikšmė 0 reiškia, kad ši gija nepritaikyta spausdinti ant šalto pagrindo (Cool Plate)." msgid "This is the bed temperature of the first layer. A value of 0 means the filament does not support printing on the Textured Cool Plate." msgstr "Pirmojo sluoksnio pagrindo temperatūra. Reikšmė 0 reiškia, kad ši gija nepritaikyta spausdinti ant tekstūruoto šalto pagrindo (Textured Cool Plate)." msgid "This is the bed temperature of the first layer. A value of 0 means the filament does not support printing on the Engineering Plate." msgstr "Pirmojo sluoksnio pagrindo temperatūra. Reikšmė 0 reiškia, kad ši gija nepritaikyta spausdinti ant inžinerinio pagrindo (Engineering Plate)." msgid "This is the bed temperature of the first layer. A value of 0 means the filament does not support printing on the High Temp Plate." msgstr "Pirmojo sluoksnio pagrindo temperatūra. Reikšmė 0 reiškia, kad ši gija nepritaikyta spausdinti ant aukštos temperatūros pagrindo (High Temp Plate)." msgid "This is the bed temperature of the first layer. A value of 0 means the filament does not support printing on the Textured PEI Plate." msgstr "Pirmojo sluoksnio pagrindo temperatūra. Reikšmė 0 reiškia, kad ši gija nepritaikyta spausdinti ant tekstūruoto PEI pagrindo (Textured PEI Plate)." msgid "Plate types supported by the printer" msgstr "Spausdintuvo palaikomi pagrindo tipai." msgid "Default bed type" msgstr "Numatytasis pagrindo tipas" msgid "Default bed type for the printer (supports both numeric and string format)." msgstr "Numatytasis spausdintuvo pagrindo tipas (palaiko tiek skaitmenų, tiek simbolių formatą)." msgid "First layer print sequence" msgstr "Pirmojo sluoksnio spausdinimo seka" msgid "Other layers print sequence" msgstr "Kitų sluoksnių spausdinimo seka" msgid "The number of other layers print sequence" msgstr "Sluoksnių skaičiaus spausdinimo seka" msgid "Other layers filament sequence" msgstr "Kitų sluoksnių gijų seka" msgid "This G-code is inserted at every layer change before the Z lift." msgstr "Šis G-kodas įterpiamas keičiant kiekvieną sluoksnį, prieš pakeliant Z ašį." msgid "Bottom shell layers" msgstr "Apatinio apvalkalo sluoksniai" msgid "This is the number of solid layers of bottom shell, including the bottom surface layer. When the thickness calculated by this value is thinner than bottom shell thickness, the bottom shell layers will be increased." msgstr "Tai vientisų apatinio apvalkalo sluoksnių skaičius, įskaitant patį apatinį paviršių. Jei pagal šią reikšmę apskaičiuotas storis yra mažesnis už nurodytą apatinio apvalkalo storį, sluoksnių skaičius bus automatiškai padidintas." msgid "Bottom shell thickness" msgstr "Apatinio apvalkalo storis" msgid "The number of bottom solid layers is increased when slicing if the thickness calculated by bottom shell layers is thinner than this value. This can avoid having too thin a shell when layer height is small. 0 means that this setting is disabled and the thickness of the bottom shell is determined simply by the number of bottom shell layers." msgstr "Pjaustant didinamas apatinių vientisų sluoksnių skaičius, jei pagal apatinius apvalkalo sluoksnius apskaičiuotas storis yra plonesnis už šią vertę. Taip galima išvengti per plono apvalkalo, kai sluoksnių aukštis yra mažas. 0 reiškia, kad šis nustatymas išjungtas ir apatinio apvalkalo storis visiškai nustatomas pagal apatinio apvalkalo sluoksnius." msgid "Apply gap fill" msgstr "Taikyti tarpų užpildymą" msgid "" "Enables gap fill for the selected solid surfaces. The minimum gap length that will be filled can be controlled from the filter out tiny gaps option below.\n" "\n" "Options:\n" "1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces for maximum strength\n" "2. Top and Bottom surfaces: Applies gap fill to top and bottom surfaces only, balancing print speed, reducing potential over extrusion in the solid infill and making sure the top and bottom surfaces have no pinhole gaps\n" "3. Nowhere: Disables gap fill for all solid infill areas\n" "\n" "Note that if using the classic perimeter generator, gap fill may also be generated between perimeters, if a full width line cannot fit between them. That perimeter gap fill is not controlled by this setting.\n" "\n" "If you would like all gap fill, including the classic perimeter generated one, removed, set the filter out tiny gaps value to a large number, like 999999.\n" "\n" "However this is not advised, as gap fill between perimeters is contributing to the model's strength. For models where excessive gap fill is generated between perimeters, a better option would be to switch to the arachne wall generator and use this option to control whether the cosmetic top and bottom surface gap fill is generated." msgstr "" "Įjungia parinktų vientisų paviršių tarpų užpildymą. Mažiausią užpildomą tarpo ilgį galima valdyti žemiau esančia mažų tarpų filtravimo parinktimi.\n" "\n" "Parinktys:\n" "1. Visur: tarpų užpildymas taikomas viršutiniams, apatiniams ir vidiniams vientisiems paviršiams, kad būtų užtikrintas maksimalus tvirtumas.\n" "2. Viršutiniai ir apatiniai paviršiai: užpildomi tik viršutiniai ir apatiniai paviršiai – taip subalansuojamas spausdinimo greitis, sumažinama perteklinė ekstruzija (over-extrusion) vientisame užpilde ir užtikrinama, kad viršutiniame bei apatiniame paviršiuje neliktų adatinių skylučių.\n" "3. Niekur: tarpų užpildymas išjungiamas visose vientiso užpildo srityse.\n" "\n" "Atkreipkite dėmesį, kad naudojant klasikinį perimetro generatorių, tarpų užpildas gali būti generuojamas ir tarp perimetrų, jei tarp jų netelpa pilno pločio linija. Šis nustatymas tokio perimetrų tarpų užpildymo nevaldo.\n" "\n" "Jei norite visiškai pašalinti bet kokį tarpų užpildymą (įskaitant generuojamą klasikinio perimetro), nustatykite didelę mažų tarpų filtravimo reikšmę, pavyzdžiui, 999999.\n" "\n" "Tačiau tai nerekomenduojama, nes tarpų užpildymas tarp perimetrų didina modelio tvirtumą. Modeliams, kuriuose tarp perimetrų sugeneruojama per daug tarpų užpildo, geresnis pasirinkimas būtų perjungti į „Arachne“ sienelių generatorių ir šia parinktimi valdyti tik kosmetinį viršutinio bei apatinio paviršiaus tarpų užpildymą." msgid "Everywhere" msgstr "Visur" msgid "Top and bottom surfaces" msgstr "Viršutiniai ir apatiniai paviršiai" msgid "Nowhere" msgstr "Niekur" msgid "Force cooling for overhangs and bridges" msgstr "Priverstinis iškyšų ir tiltelių aušinimas" msgid "Enable this option to allow adjustment of the part cooling fan speed for specifically for overhangs, internal and external bridges. Setting the fan speed specifically for these features can improve overall print quality and reduce warping." msgstr "Įjunkite šią parinktį, kad galėtumėte reguliuoti detalės aušinimo ventiliatoriaus greitį specialiai iškyšoms, vidiniams ir išoriniams tilteliams. Parinkus specifinį ventiliatoriaus greitį šiems elementams, galima pagerinti bendrą spausdinimo kokybę ir sumažinti modelio deformacijas (warping)." msgid "Overhangs and external bridges fan speed" msgstr "Ventiliatoriaus greitis iškyšose ir išoriniuose tilteliuose" msgid "" "Use this part cooling fan speed when printing bridges or overhang walls with an overhang threshold that exceeds the value set in the 'Overhangs cooling threshold' parameter above. Increasing the cooling specifically for overhangs and bridges can improve the overall print quality of these features.\n" "\n" "Please note, this fan speed is clamped on the lower end by the minimum fan speed threshold set above. It is also adjusted upwards up to the maximum fan speed threshold when the minimum layer time threshold is not met." msgstr "" "Šis detalės aušinimo ventiliatoriaus greitis naudojamas spausdinant tiltelius arba iškyšų sieneles, kai iškyšos riba viršija aukščiau nustatyto parametro „Iškyšų aušinimo slenkstis“ reikšmę. Padidinus vėsinimą specialiai iškyšoms ir tilteliams, galima pagerinti šių elementų spausdinimo kokybę.\n" "\n" "Atkreipkite dėmesį, kad šį ventiliatoriaus greitį iš apačios riboja aukščiau nustatytas minimalaus ventiliatoriaus greičio slenkstis. Greitis taip pat didinamas iki maksimalios ventiliatoriaus greičio ribos, kai nepasiekiama minimali sluoksnio spausdinimo trukmė." msgid "Overhang cooling activation threshold" msgstr "Iškyšų aušinimo aktyvavimo slenkstis" #, no-c-format, no-boost-format msgid "When the overhang exceeds this specified threshold, force the cooling fan to run at the 'Overhang Fan Speed' set below. This threshold is expressed as a percentage, indicating the portion of each line's width that is unsupported by the layer beneath it. Setting this value to 0% forces the cooling fan to run for all outer walls, regardless of the overhang degree." msgstr "Kai iškyša viršija nurodytą slenkstį, aušinimo ventiliatorius priverstinai paleidžiamas žemiau nustatytu „Iškyšų ventiliatoriaus greičiu“. Šis slenkstis išreiškiamas procentais, nurodančiais kiekvienos linijos pločio dalį, esančią pakibusioje būsenoje (nepalaikomą po ja esančio sluoksnio). Nustačius reikšmę 0 %, ventiliatorius veiks spausdinant visas išorines sieneles, nepriklausomai nuo iškyšos kampo." msgid "External bridge infill direction" msgstr "Išorinio tilto užpildo kryptis" # AI Translated #, no-c-format, no-boost-format msgid "" "External Bridging angle override.\n" "If left to zero, the bridging angle will be calculated automatically for each specific bridge.\n" "Otherwise the provided angle will be used according to:\n" " - The absolute coordinates\n" " - The absolute coordinates + Model rotation: If Align directions to model is enabled\n" " - The optimal automatic angle + this value: If 'Relative Bridge Angle' is enabled\n" "\n" "Use 180° for zero absolute angle." msgstr "" "Išorinio tiltavimo kampo nustelbimas.\n" "Jei paliekamas nulis, tiltavimo kampas kiekvienam konkrečiam tiltui bus apskaičiuojamas automatiškai.\n" "Priešingu atveju pateiktas kampas bus naudojamas pagal:\n" " - Absoliučias koordinates\n" " - Absoliučias koordinates + modelio pasukimą: jei įjungta „Lygiuoti kryptis pagal modelį“\n" " - Optimalų automatinį kampą + šią reikšmę: jei įjungta „Santykinis tilto kampas“\n" "\n" "Naudokite 180°, kad gautumėte nulinį absoliutų kampą." msgid "Internal bridge infill direction" msgstr "Vidinio tilto užpildo kryptis" # AI Translated msgid "" "Internal Bridging angle override.\n" "If left to zero, the bridging angle will be calculated automatically for each specific bridge.\n" "Otherwise the provided angle will be used according to:\n" " - The absolute coordinates\n" " - The absolute coordinates + Model rotation: If Align directions to model is enabled\n" " - The optimal automatic angle + this value: If 'Relative Bridge Angle' is enabled\n" "\n" "Use 180° for zero absolute angle." msgstr "" "Vidinio tiltavimo kampo nustelbimas.\n" "Jei paliekamas nulis, tiltavimo kampas kiekvienam konkrečiam tiltui bus apskaičiuojamas automatiškai.\n" "Priešingu atveju pateiktas kampas bus naudojamas pagal:\n" " - Absoliučias koordinates\n" " - Absoliučias koordinates + modelio pasukimą: jei įjungta „Lygiuoti kryptis pagal modelį“\n" " - Optimalų automatinį kampą + šią reikšmę: jei įjungta „Santykinis tilto kampas“\n" "\n" "Naudokite 180°, kad gautumėte nulinį absoliutų kampą." msgid "Relative bridge angle" msgstr "Santykinis tiltelio kampas" msgid "When enabled, the bridge angle values are added to the automatically calculated bridge direction instead of overriding it." msgstr "Kai įjungta, tiltelio kampo reikšmės pridedamos prie automatiškai apskaičiuotos tiltelio krypties, užuot ją visiškai perrašiusios." msgid "External bridge density" msgstr "Išorinio tilto užpildo tankis" msgid "" "Controls the density (spacing) of external bridge lines.\n" "Theoretically, 100% means a solid bridge, but due to the tendency of bridge extrusions to sag, 100% may not be sufficient.\n" "\n" "- Higher than 100% density (Recommended Max 125%):\n" " - Pros: Produces smoother bridge surfaces, as overlapping lines provide additional support during printing.\n" " - Cons: Can cause overextrusion, which may reduce lower and upper surface quality and increase the risk of warping.\n" "\n" "- Lower than 100% density (Min 10%):\n" " - Pros: Can create a string-like first layer. Faster and with better cooling because there is more space for air to circulate around the extruded bridge.\n" " - Cons: May lead to sagging and poorer surface finish." msgstr "" "Valdo išorinių tiltelių linijų tankį (atstumus tarp jų).\n" "Teoriškai 100 % reikšmė reiškia vientisą tiltelį, tačiau dėl ekstruduojamo tiltelio polinkio įsmukti (išsigaubti), 100 % gali nepakakti.\n" " – Didesnis nei 100 % tankis (rekomenduojama maks. 125 %):\n" " – Privalumai: sukuriami lygesni tiltelių paviršiai, nes persidengiančios linijos suteikia papildomą atramą spausdinimo metu.\n" " – Trūkumai: gali sukelti perteklinę ekstruziją (over-extrusion), o tai gali pabloginti apatinio bei viršutinio paviršiaus kokybę ir padidinti modelio deformacijos (warping) riziką.\n" "\n" " – Mažesnis nei 100 % tankis (min. 10 %):\n" " – Privalumai: galima suformuoti į stygas panašų pirmąjį sluoksnį. Spausdinama greičiau ir užtikrinamas geresnis aušinimas, nes aplink ekstruduojamą tiltelį lieka daugiau vietos oro cirkuliacijai.\n" " – Trūkumai: tiltelis gali įsmukti, o paviršiaus apdaila gali būti prastesnė." msgid "Internal bridge density" msgstr "Vidinio tilto užpildo tankis" msgid "" "Controls the density (spacing) of internal bridge lines.\n" "Internal bridges act as intermediate support between sparse infill and top solid infill and can strongly affect top surface quality.\n" "\n" "- Higher than 100% density (Recommended Max 125%):\n" " - Pros: Improves internal bridge strength and support under top layers, reducing sagging and improving top-surface finish.\n" " - Cons: Increases material use and print time; excessive density may cause overextrusion and internal stresses.\n" "\n" "- Lower than 100% density (Min 10%):\n" " - Pros: Can reduce pillowing and improve cooling (more airflow through the bridge), and may speed up printing.\n" " - Cons: May reduce internal support, increasing the risk of sagging and top surface defects.\n" "\n" "This option works particularly well when combined with the second internal bridge over infill option to improve bridging further before solid infill is extruded." msgstr "" "Valdo vidinių tiltelių linijų tankį (atstumus tarp jų).\n" "Vidiniai tilteliai veikia kaip tarpinė atrama tarp reto užpildo (sparse infill) ir viršutinio vientiso užpildo, todėl gali stipriai paveikti viršutinio paviršiaus kokybę.\n" "\n" "– Didesnis nei 100 % tankis (rekomenduojama maks. 125 %):\n" " – Privalumai: padidina vidinio tiltelio tvirtumą ir atramą po viršutiniais sluoksniais, sumažina įsmukimą bei pagerina viršutinio paviršiaus apdailą.\n" " – Trūkumai: padidėja medžiagos sąnaudos ir spausdinimo laikas; per didelis tankis gali sukelti perteklinę ekstruziją bei vidinius įtempius.\n" "\n" "– Mažesnis nei 100 % tankis (min. 10 %):\n" " – Privalumai: gali sumažinti „pagalvių“ susidarymo (pillowing) efektą ir pagerinti aušinimą (didesnis oro srautas pro tiltelį), taip pat gali pagreitinti spausdinimą.\n" " – Trūkumai: gali sumažėti vidinė atrama, todėl padidėja įsmukimo ir viršutinio paviršiaus defektų rizika.\n" "\n" "Ši parinktis ypač gerai veikia kartu su funkcija „antras vidinis tiltelis virš užpildo“, kad dar labiau pagerintų tiltelių formavimą prieš ekstruduojant vientisą užpildą." msgid "Bridge flow ratio" msgstr "Išorinio tilto srauto koeficientas" msgid "" "This value governs the thickness of the external (visible) bridge layer.\n" "Values above 1.0: Increase the amount of material while maintaining line spacing. This can improve line contact and strength.\n" "Values below 1.0: Reduce the amount of material while adjusting line spacing to maintain contact. This can improve sagging.\n" "\n" "The actual bridge flow used is calculated by multiplying this value with the filament flow ratio, and if set, the object's flow ratio." msgstr "" "Ši reikšmė nustato išorinio (matomo) tiltelio sluoksnio storį.\n" "Reikšmės virš 1.0: padidina medžiagos kiekį, išlaikant tuos pačius atstumus tarp linijų. Tai gali pagerinti linijų kontaktą ir tvirtumą.\n" "Reikšmės žemiau 1.0: sumažina medžiagos kiekį, kartu koreguojant atstumus tarp linijų, kad būtų išlaikytas kontaktas. Tai gali padėti sumažinti įsmukimą.\n" "\n" "Faktinis naudojamas tiltelio srautas apskaičiuojamas padauginus šią reikšmę iš gijos srauto koeficiento (filament flow ratio) ir objekto srauto koeficiento (jei jis nustatytas)." msgid "" "Line width of the Bridge. If expressed as a %, it will be computed over the nozzle diameter.\n" "Recommended to use with a higher Bridge density or Bridge flow ratio.\n" "\n" "The maximum value is 100% or the nozzle diameter.\n" "If set to 0, the line width will match the Internal solid infill width." msgstr "" "Tiltelio linijos plotis. Jei išreikštas procentais (%), jis bus skaičiuojamas nuo purkštuko skersmens.\n" "Rekomenduojama naudoti su didesniu tiltelio tankiu arba išorinio tilto srauto koeficientu.\n" "\n" "Maksimali reikšmė yra 100 % arba purkštuko skersmuo.\n" "Nustačius 0, linijos plotas sutaps su vidinio vientiso užpildo (internal solid infill) pločiu." msgid "Internal bridge flow ratio" msgstr "Vidinio tilto srauto koeficientas" msgid "" "This value governs the thickness of the internal bridge layer. This is the first layer over sparse infill so increasing it may increase strength and upper layer quality.\n" "Values above 1.0: Increase the amount of material while maintaining line spacing. This can improve line contact and strength.\n" "Values below 1.0: Reduce the amount of material while adjusting line spacing to maintain contact. This can improve sagging.\n" "\n" "The actual bridge flow used is calculated by multiplying this value with the filament flow ratio, and if set, the object's flow ratio." msgstr "" "Ši reikšmė nustato vidinio tiltelio sluoksnio storį. Tai yra pirmasis sluoksnis virš reto užpildo (sparse infill), todėl jį padidinus gali išaugti tvirtumas ir viršutinių sluoksnių kokybė.\n" "Reikšmės virš 1.0: padidina medžiagos kiekį, išlaikant tuos pačius atstumus tarp linijų. Tai gali pagerinti linijų kontaktą ir tvirtumą.\n" "Reikšmės žemiau 1.0: sumažina medžiagos kiekį, kartu koreguojant atstumus tarp linijų, kad būtų išlaikytas kontaktas. Tai gali padėti sumažinti įsmukimą.\n" "\n" "Faktinis naudojamas tiltelio srautas apskaičiuojamas padauginus šią reikšmę iš gijos srauto koeficiento (filament flow ratio) ir objekto srauto koeficiento (jei jis nustatytas)." msgid "Top surface flow ratio" msgstr "Viršutinio paviršiaus srauto koeficientas" msgid "" "This factor affects the amount of material for top solid infill. You can decrease it slightly to have smooth surface finish.\n" "\n" "The actual top surface flow used is calculated by multiplying this value with the filament flow ratio, and if set, the object's flow ratio." msgstr "" "Šis veiksnys turi įtakos viršutinio vientiso užpildo medžiagos kiekiui. Galite jį šiek tiek sumažinti, kad paviršius būtų lygus.\n" "\n" "Faktinis naudojamas viršutinio paviršiaus srautas apskaičiuojamas padauginus šią reikšmę iš gijų srauto koeficiento ir, jei nustatyta, iš objekto srauto koeficiento." msgid "Bottom surface flow ratio" msgstr "Apatinio paviršiaus srauto koeficientas" msgid "" "This factor affects the amount of material for bottom solid infill.\n" "\n" "The actual bottom solid infill flow used is calculated by multiplying this value with the filament flow ratio, and if set, the object's flow ratio." msgstr "" "Šis koeficientas turi įtakos apatinio vientiso užpildo medžiagos kiekiui.\n" "\n" "Faktinis apatinio vientiso užpildo srautas apskaičiuojamas padauginus šią reikšmę iš gijos srauto koeficiento ir objekto srauto koeficiento (jei jis nustatytas)." msgid "Set other flow ratios" msgstr "Nustatyti kitus srauto koeficientus" msgid "Change flow ratios for other extrusion path types." msgstr "Keisti kitų ekstruzijos trajektorijų tipų srauto koeficientus." msgid "First layer flow ratio" msgstr "Pirmojo sluoksnio srauto koeficientas" msgid "" "This factor affects the amount of material on the first layer for the extrusion path roles listed in this section.\n" "\n" "For the first layer, the actual flow ratio for each path role (does not affect brims and skirts) will be multiplied by this value." msgstr "" "Šis koeficientas turi įtakos pirmojo sluoksnio medžiagos kiekiui šioje skiltyje išvardytoms ekstruzijos trajektorijoms.\n" "\n" "Pirmiajam sluoksniui faktinis kiekvienos trajektorijos paskirties srauto koeficientas (tai neturi įtakos kraštams ir apvadams – brims/skirts) bus padaugintas iš šios reikšmės." msgid "Outer wall flow ratio" msgstr "Išorinės sienelės srauto koeficientas" msgid "" "This factor affects the amount of material for outer walls.\n" "\n" "The actual outer wall flow used is calculated by multiplying this value by the filament flow ratio, and if set, the object's flow ratio." msgstr "" "Šis koeficientas turi įtakos išorinių sienelių medžiagos kiekiui.\n" "\n" "Faktinis išorinės sienelės srautas apskaičiuojamas padauginus šią reikšmę iš gijos srauto koeficiento ir objekto srauto koeficiento (jei jis nustatytas)." msgid "Inner wall flow ratio" msgstr "Vidinės sienelės srauto koeficientas" msgid "" "This factor affects the amount of material for inner walls.\n" "\n" "The actual inner wall flow used is calculated by multiplying this value by the filament flow ratio, and if set, the object's flow ratio." msgstr "" "Šis koeficientas turi įtakos vidinių sienelių medžiagos kiekiui.\n" "\n" "Faktinis vidinės sienelės srautas apskaičiuojamas padauginus šią reikšmę iš gijos srauto koeficiento ir objekto srauto koeficiento (jei jis nustatytas)." msgid "Overhang flow ratio" msgstr "Iškyšų srauto koeficientas" msgid "" "This factor affects the amount of material for overhangs.\n" "\n" "The actual overhang flow used is calculated by multiplying this value by the filament flow ratio, and if set, the object's flow ratio." msgstr "" "Šis koeficientas turi įtakos iškyšų (overhangs) medžiagos kiekiui.\n" "\n" "Faktinis iškyšų srautas apskaičiuojamas padauginus šią reikšmę iš gijos srauto koeficiento ir objekto srauto koeficiento (jei jis nustatytas)." msgid "Sparse infill flow ratio" msgstr "Retojo užpildo srauto koeficientas" msgid "" "This factor affects the amount of material for sparse infill.\n" "\n" "The actual sparse infill flow used is calculated by multiplying this value by the filament flow ratio, and if set, the object's flow ratio." msgstr "" "Šis koeficientas turi įtakos retojo užpildo (sparse infill) medžiagos kiekiui.\n" "\n" "Faktinis retojo užpildo srautas apskaičiuojamas padauginus šią reikšmę iš gijos srauto koeficiento ir objekto srauto koeficiento (jei jis nustatytas)." msgid "Internal solid infill flow ratio" msgstr "Vidinio vientiso užpildo srauto koeficientas" msgid "" "This factor affects the amount of material for internal solid infill.\n" "\n" "The actual internal solid infill flow used is calculated by multiplying this value by the filament flow ratio, and if set, the object's flow ratio." msgstr "" "Šis koeficientas turi įtakos vidinio vientiso užpildo (internal solid infill) medžiagos kiekiui.\n" "\n" "Faktinis vidinio vientiso užpildo srautas apskaičiuojamas padauginus šią reikšmę iš gijos srauto koeficiento ir objekto srauto koeficiento (jei jis nustatytas)." msgid "Gap fill flow ratio" msgstr "Tarpų užpildymo srauto koeficientas" msgid "" "This factor affects the amount of material for filling the gaps.\n" "\n" "The actual gap filling flow used is calculated by multiplying this value by the filament flow ratio, and if set, the object's flow ratio." msgstr "" "Šis koeficientas turi įtakos tarpų užpildymo (gap fill) medžiagos kiekiui.\n" "\n" "Faktinis tarpų užpildymo srautas apskaičiuojamas padauginus šią reikšmę iš gijos srauto koeficiento ir objekto srauto koeficiento (jei jis nustatytas)." msgid "Support flow ratio" msgstr "Atramų srauto koeficientas" msgid "" "This factor affects the amount of material for support.\n" "\n" "The actual support flow used is calculated by multiplying this value by the filament flow ratio, and if set, the object's flow ratio." msgstr "" "Šis koeficientas turi įtakos atramų (support) medžiagos kiekiui.\n" "\n" "Faktinis atramų srautas apskaičiuojamas padauginus šią reikšmę iš gijos srauto koeficiento ir objekto srauto koeficiento (jei jis nustatytas)." msgid "Support interface flow ratio" msgstr "Atramų sąsajos srauto koeficientas" msgid "" "This factor affects the amount of material for the support interface.\n" "\n" "The actual support interface flow used is calculated by multiplying this value by the filament flow ratio, and if set, the object's flow ratio." msgstr "" "Šis koeficientas turi įtakos atramų sąsajos (support interface) medžiagos kiekiui.\n" "\n" "Faktinis atramų sąsajos srautas apskaičiuojamas padauginus šią reikšmę iš gijos srauto koeficiento ir objekto srauto koeficiento (jei jis nustatytas)." msgid "Precise wall" msgstr "Tiksli sienelė" msgid "Improve shell precision by adjusting outer wall spacing. This also improves layer consistency. NOTE: This option will be ignored for outer-inner or inner-outer-inner wall sequences." msgstr "Pagerina korpuso tikslumą koreguojant išorinių sienelių atstumus. Tai taip pat padidina sluoksnių nuoseklumą. PASTABA: ši parinktis bus ignoruojama, jei naudojamos „išorinė–vidinė“ arba „vidinė–išorinė–vidinė“ sienelių spausdinimo sekos." msgid "Only one wall on top surfaces" msgstr "Tik viena sienelė viršutiniuose paviršiuose" msgid "Use only one wall on flat top surfaces, to give more space to the top infill pattern." msgstr "Naudoti tik vieną sienelę plokščiuose viršutiniuose paviršiuose, taip paliekant daugiau vietos viršutinio užpildo raštui." msgid "One wall threshold" msgstr "Vienos sienelės slenkstis" #, no-c-format, no-boost-format msgid "" "If a top surface has to be printed and it's partially covered by another layer, it won't be considered at a top layer where its width is below this value. This can be useful to not let the 'one perimeter on top' trigger on surface that should be covered only by perimeters. This value can be a mm or a % of the perimeter extrusion width.\n" "Warning: If enabled, artifacts can be created if you have some thin features on the next layer, like letters. Set this setting to 0 to remove these artifacts." msgstr "" "Jei spausdinamas viršutinis paviršius yra iš dalies uždengiamas kito sluoksnio, jis nebus laikomas viršutiniu sluoksniu tose vietose, kur jo plotis yra mažesnis už šią reikšmę. Tai naudinga, kad funkcija „tik viena sienelė viršuje“ nesuveiktų srityse, kurias turėtų sudaryti tik perimetrai. Ši reikšmė gali būti nurodoma milimetrais (mm) arba perimetro ekstruzijos pločio procentais (%).\n" "Įspėjimas: įjungus šį nustatymą, kitame sluoksnyje esantys smulkūs elementai (pvz., raidės) gali sukurti paviršiaus defektų (artefaktų). Norėdami to išvengti, nustatykite reikšmę 0." msgid "Only one wall on first layer" msgstr "Tik viena sienelė pirmajame sluoksnyje" msgid "Use only one wall on first layer, to give more space to the bottom infill pattern." msgstr "Naudoti tik vieną sienelę pirmajame sluoksnyje, taip paliekant daugiau vietos apatinio užpildo raštui." msgid "Extra perimeters on overhangs" msgstr "Papildomi iškyšų perimetrai" msgid "Create additional perimeter paths over steep overhangs and areas where bridges cannot be anchored." msgstr "Sukurti papildomas perimetrų trajektorijas ties stačiomis iškyšomis ir vietose, kur neįmanoma įtvirtinti tiltelių." msgid "Reverse on even" msgstr "Keisti kryptį lyginiuose sluoksniuose" msgid "Overhang reversal" msgstr "Iškyšos apvertimas" msgid "" "Extrude perimeters that have a part over an overhang in the reverse direction on even layers. This alternating pattern can drastically improve steep overhangs.\n" "\n" "This setting can also help reduce part warping due to the reduction of stresses in the part walls." msgstr "" "Lyginiuose sluoksniuose ekstruduoti perimetrus (arba jų dalis, esančias virš iškyšos) priešinga kryptimi. Šis kintamos krypties raštas gali drastiškai pagerinti stačių iškyšų kokybę.\n" "\n" "Šis nustatymas taip pat padeda sumažinti modelio deformacijas (warping), nes sumažina įtempius sienelėse." msgid "Reverse only internal perimeters" msgstr "Keisti kryptį tik vidiniuose perimetruose" msgid "" "Apply the reverse perimeters logic only on internal perimeters.\n" "\n" "This setting greatly reduces part stresses as they are now distributed in alternating directions. This should reduce part warping while also maintaining external wall quality. This feature can be very useful for warp prone material, like ABS/ASA, and also for elastic filaments, like TPU and Silk PLA. It can also help reduce warping on floating regions over supports.\n" "\n" "For this setting to be the most effective, it is recommended to set the Reverse Threshold to 0 so that all internal walls print in alternating directions on even layers irrespective of their overhang degree." msgstr "" "Taikyti priešingos krypties perimetrų logiką tik vidiniams perimetrams.\n" "Šis nustatymas stipriai sumažina modelio vidinius įtempius, nes jie paskirstomi pakaitomis keičiamomis kryptimis. Tai sumažina modelio deformacijas (warping), kartu išlaikant aukštą išorinių sienelių kokybę. Ši funkcija labai naudinga medžiagoms, linkusioms trauktis (pvz., ABS/ASA), taip pat elastingoms gijoms (pvz., TPU ar „Silk PLA“). Ji taip pat padeda išvengti deformacijų kabančiose srityse virš atramų.\n" "\n" "Kad nustatymas būtų kuo efektyvesnis, rekomenduojama „Atvirkštinį slenkstį“ nustatyti į 0 – tuomet visos vidinės sienelės lyginiuose sluoksniuose bus spausdinamos pakaitinėmis kryptimis, nepriklausomai nuo iškyšos kampo." msgid "Bridge counterbore holes" msgstr "Tiltelių formavimas gilinamoms (counterbore) skylėms" msgid "" "This option creates bridges for counterbore holes, allowing them to be printed without support. Available modes include:\n" "1. None: No bridge is created\n" "2. Partially Bridged: Only a part of the unsupported area will be bridged\n" "3. Sacrificial Layer: A full sacrificial bridge layer is created" msgstr "" "Ši parinktis suformuoja tiltelius gilinamoms skylėms (counterbore), todėl jas galima kokybiškai atspausdinti be atramų. Galimi režimai:\n" "1. Nėra: tiltelis nekuriamas.\n" "2. Iš dalies suformuotas tiltelis: tilteliu užpildoma tik dalis nepalaikomos srities.\n" "3. Paaukojamas sluoksnis (Sacrificial Layer): sukuriamas pilnas, vėliau pašalinamas tilto sluoksnis." msgid "Partially bridged" msgstr "Iš dalies sujungtas tiltu" msgid "Sacrificial layer" msgstr "Paaukojamas sluoksnis" msgid "Reverse threshold" msgstr "Atvirkštinis slenkstis" msgid "Overhang reversal threshold" msgstr "Iškyšos apvertimo slenkstis" #, no-c-format, no-boost-format msgid "" "Number of mm the overhang need to be for the reversal to be considered useful. Can be a % of the perimeter width.\n" "Value 0 enables reversal on every even layers regardless.\n" "When Detect overhang wall is not enabled, this option is ignored and reversal happens on every even layers regardless." msgstr "" "Iškyšos dydis milimetrais (mm), nuo kurio krypties keitimas laikomas naudingu. Gali būti nurodomas ir perimetro pločio procentais (%).\n" "Reikšmė 0 įjungia krypties keitimą visuose lyginiuose sluoksniuose be išimties.\n" "Jei funkcija „Aptikti iškyšų sieneles“ (Detect overhang wall) išjungta, šis nustatymas ignoruojamas ir kryptis keičiama kiekviename lyginiame sluoksnyje." msgid "Slow down for overhangs" msgstr "Sulėtinti greitį dėl iškyšų" msgid "Enable this option to slow down when printing overhangs. The speeds for different overhang percentages are set below." msgstr "Įjunkite šią parinktį, kad sulėtintumėte greitį spausdinant iškyšas. Skirtingų iškyšų procentinių dalių greičiai nustatomi žemiau." msgid "Slow down for curled perimeters" msgstr "Sulėtinti greitį riečiantis perimetrams" #, no-c-format, no-boost-format msgid "" "Enable this option to slow down printing in areas where perimeters may have curled upwards.\n" "For example, additional slowdown will be applied when printing overhangs on sharp corners like the front of the Benchy hull, reducing curling which compounds over multiple layers.\n" "\n" "It is generally recommended to have this option switched on unless your printer cooling is powerful enough or the print speed is slow enough that perimeter curling does not happen. \n" "If printing with a high external perimeter speed, this parameter may introduce wall artifacts when slowing down, due to the potentially large variance in print speeds causing the extruder to be unable to keep up with the requested flow change.\n" "Root cause of these artifacts is most likely PA tuning being slightly off, especially when combined with a high PA smooth time.\n" "\n" "Recommendations when enabling this option:\n" "1. Reduce Pressure Advance smooth time to 0.015 - 0.02 so the extruder reacts quickly to the speed changes.\n" "2. Increase the minimum print speeds to limit the magnitude of the slowdown and reduce the variance between fast and slow segments.\n" "3. If artifacts still appear, enable Extrusion Rate Smoothing (ERS) to further smooth the flow transitions.\n" "\n" "Note: When this option is enabled, overhang perimeters are treated like overhangs, meaning the overhang speed is applied even if the overhanging perimeter is part of a bridge.\n" "For example, when the perimeters are 100% overhanging, with no wall supporting them from underneath, the 100% overhang speed will be applied." msgstr "" "Įjunkite šią parinktį, kad sumažintumėte spausdinimo greitį vietose, kur perimetrai linkę riestis į viršų.\n" "Pavyzdžiui, papildomas sulėtinimas bus taikomas spausdinant iškyšas ties aštriais kampais (kaip „Benchy“ laivelio priekis) – tai apsaugo nuo sluoksnių rietimosi, kuris linkęs kauptis per kelis sluoksnius.\n" "\n" "Rekomenduojama visada laikyti šią parinktį įjungtą, nebent spausdintuvo aušinimas yra itin galingas arba spausdinimo greitis toks mažas, kad perimetrų rietimasis nevyksta.\n" "Jei spausdinama dideliu išorinio perimetro greičiu, šis parametras lėtėjimo metu gali sukelti sienelių artefaktų (defektų), nes dėl didelių greičio šuolių ekstruderis gali nespėti sureguliuoti srauto pokyčio.\n" "Pagrindinė tokių artefaktų priežastis dažniausiai yra netiksliai suderintas „Pressure Advance“ (PA) parametras, ypač jei naudojama didelė „PA smooth time“ reikšmė.\n" "\n" "Rekomendacijos įjungus šią parinktį:\n" "1. Sumažinkite „Pressure Advance smooth time“ iki 0.015 - 0.02, kad ekstruderis greitai reaguotų į greičio pokyčius.\n" "2. Padidinkite minimalų spausdinimo greitį, kad apribotumėte sulėtėjimo mastą ir sumažintumėte skirtumą tarp greitų bei lėtų segmentų.\n" "3. Jei artefaktai išlieka, įjunkite „Ekstruzijos srauto glotninimą“ (ERS), kad sušvelgintumėte srauto perėjimus.\n" "\n" "Pastaba: kai ši parinktis įjungta, išsikišę perimetrai yra traktuojami kaip iškyšos, t. y. iškyšų greitis taikomas net ir tada, kai perimetras yra tiltelio dalis.\n" "Pavyzdžiui, kai perimetrai kyšo 100 % (apačioje nėra jokios palaikančios sienelės), bus taikomas būtent 100 % iškyšos greitis." msgid "mm/s or %" msgstr "mm/s arba %" msgid "" "Speed of the externally visible bridge extrusions.\n" "\n" "In addition, if Slow down for curled perimeters is disabled or Classic overhang mode is enabled, it will be the print speed of overhang walls that are supported by less than 13%, whether they are part of a bridge or an overhang." msgstr "" "Išoriškai matomų tiltelio ekstruzijų greitis.\n" "\n" "Papildomai, jei funkcija „Sulėtinti greitį riesantis perimetrams“ yra išjungta arba įjungtas „Klasikinis iškyšų režimas“, šis greitis bus taikomas iškyšų sienelėms, kurių atrama yra mažesnė nei 13 % (nesvarbu, ar jos yra tiltelio, ar iškyšos dalis)." msgid "Speed of internal bridges. If the value is expressed as a percentage, it will be calculated based on the bridge_speed. Default value is 150%." msgstr "Vidinių tiltelių spausdinimo greitis. Jei reikšmė nurodoma procentais, ji apskaičiuojama pagal „bridge_speed“ (tiltelių greitį). Numatytoji reikšmė – 150 %." msgid "Brim width" msgstr "Pado apvado plotis" msgid "This is the distance from the model to the outermost brim line." msgstr "Atstumas nuo modelio iki išorinės krašto linijos" msgid "Brim type" msgstr "Apvado tipas" msgid "This controls the generation of the brim at outer and/or inner side of models. Auto means the brim width is analyzed and calculated automatically." msgstr "Valdo apvado generavimą modelio išorinėje ir (arba) vidinėje pusėje. „Auto“ režimu apvado plotis išanalizuojamas ir apskaičiuojamas automatiškai." msgid "Brim-object gap" msgstr "Tarpas tarp apvado ir objekto" msgid "This creates a gap between the innermost brim line and the object and can make the brim easier to remove." msgstr "Sukuriamas tarpas tarp vidinės krašto linijos ir objekto, todėl galima lengviau jį atskirti." msgid "Brim flow ratio" msgstr "Apvado srauto koeficientas" msgid "" "This factor affects the amount of material for brims.\n" "\n" "The actual brim flow used is calculated by multiplying this value by the filament flow ratio, and if set, the object's flow ratio.\n" "\n" "Note: The resulting value will not be affected by the first-layer flow ratio." msgstr "" "Šis koeficientas turi įtakos pado apvadų medžiagos kiekiui.\n" "\n" "Faktinis apvado srautas apskaičiuojamas padauginus šią reikšmę iš gijos srauto koeficiento ir objekto srauto koeficiento (jei jis nustatytas).\n" "\n" "Pastaba: gautai reikšmei pirmojo sluoksnio srauto koeficientas įtakos neturės." msgid "Brim follows compensated outline" msgstr "Apvadas atitinka kompensuotą kontūrą" msgid "" "When enabled, the brim is aligned with the first-layer perimeter geometry after Elephant Foot Compensation is applied.\n" "This option is intended for cases where Elephant Foot Compensation significantly alters the first-layer footprint.\n" "\n" "If your current setup already works well, enabling it may be unnecessary and can cause the brim to fuse with upper layers." msgstr "" "Kai įjungta, apvadas sulygiuojamas su pirmojo sluoksnio perimetro geometrija jau pritaikius „Dramblio pėdos kompensaciją“ (Elephant Foot Compensation).\n" "\n" "Ši parinktis skirta atvejams, kai dramblio pėdos kompensacija stipriai keičia pirmojo sluoksnio kontūrus.\n" "\n" "Jei dabartinė sąranka veikia gerai, šios parinkties įjungti nebūtina, nes apvadas gali per stipriai susilieti su aukštesniais sluoksniais." msgid "Combine brims" msgstr "Apjungti apvadus" msgid "Combine multiple brims into one when they are close to each other. This can improve brim adhesion." msgstr "Apjungia kelis arti vienas kito esančius apvadus į vieną. Tai gali pagerinti apvado sukibimą su pagrindu." msgid "Brim ears" msgstr "Apvado „ausys“ (Brim ears)" msgid "Only draw brim over the sharp edges of the model." msgstr "Generuoti apvadą tik aplink aštrius modelio kampus (kraštus)." msgid "Brim ear max angle" msgstr "Maksimalus apvado „ausies“ kampas" msgid "" "Maximum angle to let a brim ear appear.\n" "If set to 0, no brim will be created.\n" "If set to ~180, brim will be created on everything but straight sections." msgstr "" "Maksimalus kampas, kuriam esant dar generuojama apvado „ausis“.\n" "Nustačius 0, apvadas nebus kuriamas.\n" "Nustačius ~180, apvadas bus kuriamas visur, išskyrus visiškai tiesias atkarpas." msgid "Brim ear detection radius" msgstr "Apvado „ausų“ aptikimo spindulys" msgid "" "The geometry will be decimated before detecting sharp angles. This parameter indicates the minimum length of the deviation for the decimation.\n" "0 to deactivate." msgstr "" "Prieš aptinkant aštrius kampus, geometrija yra supaprastinama (decimuojama). Šis parametras nurodo minimalų nuokrypio ilgį supaprastinimui atlikti.\n" "Įrašykite 0, kad išjungtumėte." msgid "upward compatible machine" msgstr "atgaliniu būdu suderinamas įrenginys" msgid "Condition" msgstr "Sąlyga" msgid "A Boolean expression using the configuration values of an active printer profile. If this expression evaluates to true, this profile is considered compatible with the active printer profile." msgstr "Būlio išraiška, naudojanti aktyvaus spausdintuvo profilio konfigūracijos reikšmes. Jei ši išraiška vertinama kaip tiesa, šis profilis laikomas suderinamu su aktyviu spausdintuvo profiliu." msgid "A Boolean expression using the configuration values of an active print profile. If this expression evaluates to true, this profile is considered compatible with the active print profile." msgstr "Būlio išraiška, naudojanti aktyvaus spausdinimo profilio konfigūracijos reikšmes. Jei ši išraiška vertinama kaip tiesa, šis profilis laikomas suderinamu su aktyviu spausdinimo profiliu." msgid "This determines the print sequence, allowing you to print layer-by-layer or object-by-object." msgstr "Tai nustato spausdinimo seką, leidžiančią spausdinti sluoksnis po sluoksnio arba objektas po objekto." msgid "By layer" msgstr "Sluoksnis po sluoksnio" msgid "By object" msgstr "Objektas po objekto" msgid "Intra-layer order" msgstr "Eiliškumas sluoksnio viduje" # AI Translated msgid "" "Order in which object instances are visited within a single layer, which controls how much travel is spent moving between them.\n" "\n" "Default: nearest-neighbor chaining, refined with 2-opt and crossing removal. A good general choice.\n" "As object list: instances are printed in the same order as the object list, without any path optimization. Use it when you need a predictable, manually controlled order.\n" "Best of all (shortest path): every strategy is evaluated and the shortest one is used. The object instance order is decided once for the whole print, while the ordering of individual islands is decided per layer, so different layers may end up using different strategies. Slightly slower to slice.\n" "Snake: serpentine row-by-row traversal, refined with 2-opt. Well suited to regular grids of many small parts.\n" "\n" "With multiple filaments or tools in the same layer, minimizing tool changes takes priority: objects are grouped by filament first and this setting only orders the instances within each filament group, so the overall sequence may not look like the shortest path across the plate." msgstr "" "Tvarka, kuria objektų kopijos aplankomos viename sluoksnyje; ji lemia, kiek tuščiosios eigos sugaištama pereinant tarp jų.\n" "\n" "Numatytasis: grandinės sudarymas artimiausio kaimyno metodu, patobulintas 2-opt algoritmu ir sankirtų šalinimu. Geras bendras pasirinkimas.\n" "Kaip objektų sąrašas: kopijos spausdinamos tokia pačia tvarka kaip objektų sąraše, be jokio kelio optimizavimo. Naudokite, kai reikia nuspėjamos, rankiniu būdu valdomos tvarkos.\n" "Geriausias iš visų (trumpiausias kelias): įvertinamos visos strategijos ir naudojama trumpiausia. Objektų kopijų tvarka nustatoma vieną kartą visam spausdinimui, o atskirų salelių tvarka – kiekvienam sluoksniui atskirai, todėl skirtinguose sluoksniuose gali būti naudojamos skirtingos strategijos. Sluoksniuojama šiek tiek lėčiau.\n" "Gyvatėle: vingiuotas ėjimas eilutė po eilutės, patobulintas 2-opt algoritmu. Gerai tinka taisyklingiems daugelio mažų detalių tinkleliams.\n" "\n" "Kai tame pačiame sluoksnyje naudojamos kelios gijos ar keli įrankiai, pirmenybė teikiama įrankio keitimų mažinimui: objektai pirmiausia grupuojami pagal giją, o ši nuostata rikiuoja tik kopijas kiekvienoje grupėje, todėl bendra seka gali neatrodyti kaip trumpiausias kelias per plokštę." msgid "As object list" msgstr "Kaip objektų sąrašas" # AI Translated msgid "Best of all (shortest path)" msgstr "Geriausias iš visų (trumpiausias kelias)" # AI Translated msgid "Snake" msgstr "Gyvatėle" msgid "Slow printing down for better layer cooling" msgstr "Sulėtinti spausdinimą geresniam sluoksnių aušinimui" msgid "Enable this option to slow printing speed down to ensure that the final layer time is not shorter than the layer time threshold in \"Max fan speed threshold\", so that the layer can be cooled for a longer time. This can improve the quality for small details." msgstr "Įjunkite šią parinktį, kad sumažintumėte spausdinimo greitį, užtikrinant, jog sluoksnio spausdinimo laikas nebūtų trumpesnis už ribą, nurodytą nustatyme „Maksimalaus ventiliatoriaus greičio slenkstis“. Taip sluoksnis aušinamas ilgiau, o tai pastebimai pagerina smailių viršūnių bei smulkių elementų spausdinimo kokybę." msgid "Normal printing" msgstr "Įprastas spausdinimas" msgid "This is the default acceleration for both normal printing and travel after the first layer." msgstr "Numatytasis pagreitis tiek spausdinimo, tiek tuščiosios eigos (travel) judesiams, išskyrus pirmąjį sluoksnį." msgid "Acceleration of travel moves." msgstr "Judėjimo judesių pagreitis." msgid "First layer travel" msgstr "Pirmojo sluoksnio tuščioji eiga (travel)" msgid "" "Travel acceleration of first layer.\n" "The percentage value is relative to Travel Acceleration." msgstr "" "Pirmojo sluoksnio tuščiosios eigos (travel) pagreitis.\n" "Procentinė vertė yra santykinė su tuščiosios eigos pagreičiu." msgid "mm/s² or %" msgstr "mm/s² arba %" msgid "Acceleration of bridges. If the value is expressed as a percentage (e.g. 50%), it will be calculated based on the outer wall acceleration." msgstr "Tiltelių pagreitis. Jei vertė išreikšta procentais (pvz., 50%), ji bus apskaičiuojama pagal išorinės sienelės pagreitį." msgid "Default filament profile" msgstr "Numatytasis gijos profilis" msgid "Default filament profile when switching to this machine profile." msgstr "Numatytasis gijos profilis, automatiškai pasirenkamas perjungus šį spausdintuvo profilį." msgid "Default process profile" msgstr "Numatytasis proceso profilis" msgid "Default process profile when switching to this machine profile." msgstr "Numatytasis proceso profilis, automatiškai pasirenkamas perjungus šį spausdintuvo profilį." msgid "Activate air filtration" msgstr "Įjungti oro filtravimą" msgid "Activate for better air filtration. G-code command: M106 P3 S(0-255)" msgstr "Įjungti efektyvesniam oro filtravimui. G-kodo komanda: M106 P3 S(0-255)" msgid "Enable this to override the fan speed set in custom G-code during print." msgstr "Įjunkite, kad spausdinimo metu nepaisytumėte ventiliatoriaus greičio, nurodyto pasirinktiniame G-kode." msgid "On completion" msgstr "Baigus spausdinti" msgid "Enable this to override the fan speed set in custom G-code after print completion." msgstr "Įjunkite, kad baigus spausdinti nepaisytumėte ventiliatoriaus greičio, nurodyto pasirinktiniame G-kode." msgid "Speed of exhaust fan during printing. This speed will override the speed in filament custom G-code." msgstr "Ištraukimo (išmetimo) ventiliatoriaus greitis spausdinimo metu. Šis nustatymas yra viršesnis už greitį, nurodytą gijos pasirinktiniame G-kode." msgid "Speed of exhaust fan after printing completes." msgstr "Ištraukimo (išmetimo) ventiliatoriaus greitis baigus spausdinti." msgid "No cooling for the first" msgstr "Neaušinti pirmųjų" msgid "Turn off all cooling fans for the first few layers. This can be used to improve build plate adhesion." msgstr "Išjungti visus aušinimo ventiliatorius pirmuosiuose keliuose sluoksniuose. Tai naudojama siekiant pagerinti modelio sukibimą su pagrindu." msgid "Don't support bridges" msgstr "Nekurti atramų tilteliams" msgid "This disables supporting bridges, which decreases the amount of support required. Bridges can usually be printed directly without support over a reasonable distance." msgstr "Tai išjungia tiltų palaikymą, o tai sumažina reikalingų atramų kiekį. Tiltai dažniausiai gali būti spausdinami tiesiogiai be atramų, jei atstumas nėra per didelis." msgid "Thick external bridges" msgstr "Stori išoriniai tilteliai" msgid "" "If enabled, bridge extrusion uses a line height equal to the nozzle diameter.\n" "This increases bridge strength and reliability, allowing longer spans, but may worsen appearance.\n" "If disabled, bridges may look better but are generally reliable only for shorter spans." msgstr "" "Jei įjungta, tiltelių ekstruzijai naudojamas sluoksnio aukštis, lygus purkštuko skersmeniui.\n" "Tai padidina tiltelių tvirtumą bei patikimumą ir leidžia atspausdinti ilgesnius tarpsnius ore, tačiau gali nukentėti išvaizda.\n" "Jei išjungta, tilteliai gali atrodyti estetiškiau, tačiau patikimai spausdinami tik trumpesni tarpsniai." msgid "Thick internal bridges" msgstr "Stori vidiniai tilteliai" msgid "" "If enabled, internal bridge extrusion uses a line height equal to the nozzle diameter.\n" "This increases internal bridge strength and reliability when printed over sparse infill, but may worsen appearance.\n" "If disabled, internal bridges may look better but can be less reliable over sparse infill." msgstr "" "Jei įjungta, vidinių tiltelių ekstruzijai naudojamas sluoksnio aukštis, lygus purkštuko skersmeniui.\n" "Tai padidina vidinių tiltelių tvirtumą ir patikimumą, kai jie spausdinami virš retojo užpildo, tačiau gali pabloginti išvaizdą.\n" "Jei išjungta, vidiniai tilteliai gali atrodyti geriau, tačiau spausdinant virš retojo užpildo jie gali būti mažiau patikimi." msgid "Extra bridge layers (beta)" msgstr "Papildomi tiltelių sluoksniai (beta)" msgid "" "This option enables the generation of an extra bridge layer over internal and/or external bridges.\n" "\n" "Extra bridge layers help improve bridge appearance and reliability, as the solid infill is better supported. This is especially useful in fast printers, where the bridge and solid infill speeds vary greatly. The extra bridge layer results in reduced pillowing on top surfaces, as well as reduced separation of the external bridge layer from its surrounding perimeters.\n" "\n" "It is generally recommended to set this to at least 'External bridge only', unless specific issues with the sliced model are found.\n" "\n" "Options:\n" "1. Disabled - does not generate second bridge layers. This is the default and is set for compatibility purposes\n" "2. External bridge only - generates second bridge layers for external-facing bridges only. Please note that small bridges that are shorter or narrower than the set number of perimeters will be skipped as they would not benefit from a second bridge layer. If generated, the second bridge layer will be extruded parallel to the first bridge layer to reinforce the bridge strength\n" "3. Internal bridge only - generates second bridge layers for internal bridges over sparse infill only. Please note that the internal bridges count towards the top shell layer count of your model. The second internal bridge layer will be extruded as close to perpendicular to the first as possible. If multiple regions in the same island, with varying bridge angles are present, the last region of that island will be selected as the angle reference\n" "4. Apply to all - generates second bridge layers for both internal and external-facing bridges\n" msgstr "" "Ši parinktis leidžia sugeneruoti papildomą tiltelio sluoksnį virš vidinių ir (arba) išorinių tiltelių.\n" "\n" "Papildomi tiltelių sluoksniai pagerina jų išvaizdą bei patikimumą, nes tvirtas užpildas (solid infill) gauna geresnį pagrindą. Tai ypač aktualu greitaeigiams spausdintuvams, kur tiltelių ir tvirto užpildo spausdinimo greičiai stipriai skiriasi. Papildomas tiltelio sluoksnis sumažina viršutinių paviršių išsipūtimą (pillowing) bei išorinio tiltelio sluoksnio atsiskyrimą nuo jį supančių perimetrų.\n" "\n" "Rekomenduojama pasirinkti bent „Tik išorinis tiltelis“, nebent supjaustytame (sliced) modelyje pastebimos specifinės klaidos.\n" "\n" "Parinktys:\n" "1. Išjungta – antrasis tiltelio sluoksnis negeneruojamas. Tai numatytasis nustatymas, naudojamas suderinamumui palaikyti.\n" "2. Tik išorinis tiltelis – antrasis sluoksnis generuojamas tik išorėje matomiems tilteliams. Maži tilteliai, kurie yra trumpesni arba siauresni už nustatytą perimetrų skaičių, bus praleidžiami, nes jiems antrasis sluoksnis neduotų naudos. Jei generuojama, antrasis tiltelio sluoksnis ekstruduojamas lygiagrečiai pirmajam, taip sustiprinant konstrukciją.\n" "3. Tik vidinis tiltelis – antrasis sluoksnis generuojamas tik vidiniams tilteliams virš retojo užpildo. Atminkite, kad vidiniai tilteliai įskaičiuojami į bendrą modelio viršutinio sluoksnio (top shell) skaičių. Antrasis vidinis tiltelio sluoksnis ekstruduojamas kuo statmeniau pirmajam. Jei toje pačioje „saloje“ yra kelios sritys su skirtingais tiltelių kampais, kampo atskaita taps paskutinė tos salos sritis.\n" "4. Taikyti visiems – antrasis tiltelio sluoksnis generuojamas tiek vidiniams, tiek išorėje matomiems tilteliams.\n" msgid "External bridge only" msgstr "Tik išorinis tiltelis" msgid "Internal bridge only" msgstr "Tik vidinis tiltelis" msgid "Apply to all" msgstr "Taikyti visiems" msgid "Filter out small internal bridges" msgstr "Atfiltruoti mažus vidinius tilteliu" msgid "" "This option can help reduce pillowing on top surfaces in heavily slanted or curved models.\n" "By default, small internal bridges are filtered out and the internal solid infill is printed directly over the sparse infill. This works well in most cases, speeding up printing without too much compromise on top surface quality.\n" "However, in heavily slanted or curved models, especially where too low a sparse infill density is used, this may result in curling of the unsupported solid infill, causing pillowing.\n" "Enabling limited filtering or no filtering will print internal bridge layer over slightly unsupported internal solid infill. The options below control the sensitivity of the filtering, i.e. they control where internal bridges are created:\n" "1. Filter - enables this option. This is the default behavior and works well in most cases\n" "2. Limited filtering - creates internal bridges on heavily slanted surfaces while avoiding unnecessary bridges. This works well for most difficult models\n" "3. No filtering - creates internal bridges on every potential internal overhang. This option is useful for heavily slanted top surface models; however, in most cases, it creates too many unnecessary bridges." msgstr "" "Ši parinktis padeda sumažinti viršutinių paviršių išsipūtimą (pillowing) stipriai nuožulniuose arba išlenktuose modeliuose.\n" "Numatytuoju atveju maži vidiniai tilteliai yra atfiltruojami, o vidinis tvirtas užpildas (solid infill) spausdinamas tiesiai ant retojo užpildo. Dažniausiai tai veikia puikiai: pagreitina spausdinimą ir pastebimai nepakenkia viršutinio paviršiaus kokybei.\n" "Tačiau labai nuožulniuose ar išlenktuose modeliuose (ypač kai retojo užpildo tankis mažas) nepalaikomas tvirtas užpildas gali sukristi arba riestis, taip sukeldamas išsipūtimus.\n" "Įjungus ribotą filtravimą arba filtravimą išjungus, vidinis tiltelio sluoksnis bus formuojamas virš tų vietų, kur vidinis tvirtas užpildas lieka be pakankamos atramos. Parinktys žemiau valdo šio filtravimo jautrumą (t. y. nustato, kur bus kuriami vidiniai tilteliai):\n" "1. Filtruoti – įjungia standartinį filtravimą. Tai numatytoji elgsena, tinkanti daugeliui atvejų.\n" "2. Ribotas filtravimas – sukuria vidinius tiltelius tik ant stipriai nuožulnių paviršių, išvengiant perteklinio jų generavimo. Puikiai tinka sudėtingiems modeliams.\n" "3. Be filtravimo – sukuria vidinius tiltelius ties kiekviena potencialia vidine iškyša. Naudinga modeliams su itin nuožulniais viršutiniais paviršiais, tačiau dažniausiai sugeneruoja per daug nereikalingų tiltelių." msgid "Limited filtering" msgstr "Ribotas filtravimas" msgid "No filtering" msgstr "Be filtravimo" msgid "Max bridge length" msgstr "Maksimalus tiltelio ilgis" msgid "This is the maximum length of bridges that don't need support. Set it to 0 if you want all bridges to be supported, and set it to a very large value if you don't want any bridges to be supported." msgstr "Maksimalus tiltų, kuriems nereikia atramos, ilgis. Nustatykite 0, jei norite, kad būtų remiami visi tiltai, ir labai didelę reikšmę, jei nenorite, kad būtų remiami jokie tiltai." msgid "End G-code" msgstr "Pabaigos G-kodas" msgid "Add end G-Code when finishing the entire print." msgstr "Pabaigos G-kodas, vykdomas baigus visą spausdinimą." msgid "Between Object G-code" msgstr "Tarp objektų G-kodas" msgid "Insert G-code between objects. This parameter will only come into effect when you print your models object by object." msgstr "Įterpti G-kodą tarp objektų. Šis parametras įsigalioja tik tada, kai pasirinkta spausdinimo seka „Objektas po objekto“." msgid "Add end G-code when finishing the printing of this filament." msgstr "Pabaigos G-kodas, vykdomas baigus spausdinti šią giją." msgid "Ensure vertical shell thickness" msgstr "Užtikrinti vertikalaus apvalkalo storį" msgid "" "Add solid infill near sloping surfaces to guarantee the vertical shell thickness (top+bottom solid layers)\n" "None: No solid infill will be added anywhere. Caution: Use this option carefully if your model has sloped surfaces\n" "Critical Only: Avoid adding solid infill for walls\n" "Moderate: Add solid infill for heavily sloping surfaces only\n" "All: Add solid infill for all suitable sloping surfaces\n" "Default value is All." msgstr "" "Pridėti tvirtąjį užpildą (solid infill) šalia nuožulnių paviršių, kad būtų užtikrintas vertikalus sienelės storis (viršutiniai ir apatiniai tvirti sluoksniai).\n" "Nėra: tvirtas užpildas papildomai nepridedamas niekur. Įspėjimas: naudokite šią parinktį atsargiai, jei modelis turi nuožulnių paviršių.\n" "Tik kritinėse vietose: vengiama pridėti tvirtą užpildą po sienelėmis.\n" "Vidutiniškai: tvirtas užpildas pridedamas tik esant labai dideliam nuolydžiui.\n" "Visi: tvirtas užpildas pridedamas po visais tinkamais nuožulniais paviršiais.\n" "Numatytoji reikšmė – Visi." msgid "Critical Only" msgstr "Tik kritinėse vietose" msgid "Moderate" msgstr "Vidutiniškai" msgid "Top surface pattern" msgstr "Viršutinio paviršiaus užpildo linijų raštas" msgid "This is the line pattern for top surface infill." msgstr "Tai viršutinio paviršiaus užpildymo linijomis modelis." msgid "Monotonic" msgstr "Monotoniškas (Monotonic)" msgid "Monotonic line" msgstr "Monotoniškos linijos" msgid "Rectilinear" msgstr "Tiesiaeigis (Rectilinear)" msgid "Aligned Rectilinear" msgstr "Sulygiuotas tiesiaeigis" msgid "Concentric" msgstr "Koncentrinis" msgid "Hilbert Curve" msgstr "Hilberto kreivė" msgid "Archimedean Chords" msgstr "Archimedo akordai" msgid "Octagram Spiral" msgstr "Oktagramos spiralė" msgid "Top surface density" msgstr "Viršutinio paviršiaus tankis" msgid "Density of top surface layer. A value of 100% creates a fully solid, smooth top layer. Reducing this value results in a textured top surface, according to the chosen top surface pattern. A value of 0% will result in only the walls on the top layer being created. Intended for aesthetic or functional purposes, not to fix issues such as over-extrusion." msgstr "Viršutinio paviršiaus sluoksnio tankis. Nustačius 100 %, sukuriamas visiškai vientisas ir lygus viršutinis sluoksnis. Sumažinus šią reikšmę, gaunamas tekstūruotas viršutinis paviršius pagal pasirinktą raštą. Nustačius 0 %, viršutiniame sluoksnyje bus spausdinamos tik sienelės. Funkcija skirta estetiniais arba funkciniais tikslais, o ne tokioms problemoms kaip perteklinė ekstruzija (over-extrusion) spręsti." # AI Translated msgid "Top surface expansion" msgstr "Viršutinio paviršiaus išplėtimas" # AI Translated msgid "" "Expands the top surfaces by this distance to connect distinct top surfaces and fill gaps.\n" "Useful for cases where the top surface is interrupted by a raised feature, such as text on a plane. Expanding it removes the holes beneath these features and creates a continuous path with a better finish for printing on top. The expansion is applied to the original top surface, before any other processing such as bridging or overhang detection." msgstr "" "Išplečia viršutinius paviršius šiuo atstumu, kad sujungtų atskirus viršutinius paviršius ir užpildytų tarpus.\n" "Naudinga tais atvejais, kai viršutinį paviršių nutraukia iškilusi detalė, pavyzdžiui, tekstas plokštumoje. Jį išplėtus pašalinamos skylės po šiomis detalėmis ir sukuriamas ištisinis kelias su geresne apdaila spausdinant viršuje. Išplėtimas taikomas pradiniam viršutiniam paviršiui prieš bet kokį kitą apdorojimą, pavyzdžiui, tiltavimą ar iškyšų aptikimą." # AI Translated msgid "Top expansion wall margin" msgstr "Viršutinio išplėtimo sienelės paraštė" # AI Translated msgid "" "Using “Top surface expansion” may cause a surface that did not previously touch the model's outer walls to now do so.\n" "This can cause contraction marks (such as the hull line) on the outer walls.\n" "By adding a small margin, this contraction will not occur directly on the walls, thereby preventing a visible mark." msgstr "" "Naudojant „Viršutinio paviršiaus išplėtimą“ paviršius, kuris anksčiau nesilietė su modelio išorinėmis sienelėmis, dabar gali su jomis liestis.\n" "Dėl to ant išorinių sienelių gali atsirasti susitraukimo žymių (pavyzdžiui, korpuso linija).\n" "Pridėjus nedidelę paraštę, šis susitraukimas nevyks tiesiogiai ant sienelių ir taip bus išvengta matomos žymės." # AI Translated msgid "Top expansion direction" msgstr "Viršutinio išplėtimo kryptis" # AI Translated msgid "" "Direction in which the top surface expansion grows.\n" " - Inward grows into the holes and gaps left by features rising from the middle of a top surface.\n" " - Outward grows the outer edge of the surface, connecting surfaces separated by features that can divide a surface, such as a lattice pattern.\n" " - Inward and Outward does both." msgstr "" "Kryptis, kuria auga viršutinio paviršiaus išplėtimas.\n" " - „Į vidų“ auga į skyles ir tarpus, likusius nuo detalių, kylančių iš viršutinio paviršiaus vidurio.\n" " - „Į išorę“ auga išorinis paviršiaus kraštas, sujungiant paviršius, atskirtus detalių, kurios gali padalyti paviršių, pavyzdžiui, gardelės raštas.\n" " - „Į vidų ir į išorę“ daro abu." # AI Translated msgid "Inward and Outward" msgstr "Į vidų ir į išorę" # AI Translated msgid "Inward" msgstr "Į vidų" # AI Translated msgid "Outward" msgstr "Į išorę" msgid "Bottom surface pattern" msgstr "Apatinio paviršiaus raštas" msgid "This is the line pattern of bottom surface infill, not including bridge infill." msgstr "Tai apatinio paviršiaus užpildymo linijioms raštas, išskyrus tiltų užpildymą" msgid "Bottom surface density" msgstr "Apatinio paviršiaus tankis" msgid "" "Density of the bottom surface layer. Intended for aesthetic or functional purposes, not to fix issues such as over-extrusion.\n" "WARNING: Lowering this value may negatively affect bed adhesion." msgstr "" "Apatinio paviršiaus sluoksnio tankis. Skirtas estetiniais arba funkciniais tikslais, o ne perteklinei ekstruzijai (over-extrusion) taisyti.\n" "ĮSPĖJIMAS: sumažinus šią reikšmę, gali suprastėti pirmojo sluoksnio sukibimas su spausdinimo pagrindu." # AI Translated msgid "Top surface fill order" msgstr "Viršutinio paviršiaus užpildymo tvarka" # AI Translated msgid "" "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" "Kryptis, kuria užpildomi viršutiniai paviršiai naudojant į centrą orientuotą raštą (koncentrinį, Archimedo stygų, Oktogramos spiralės).\n" "„Į išorę“ prasideda paviršiaus centre, todėl bet koks perteklinė medžiaga stumiama link krašto, kur ji mažiausiai matoma. „Į vidų“ prasideda nuo krašto ir baigiasi ankštomis kreivėmis centre.\n" "Numatytoji tvarka naudoja trumpiausio kelio rikiavimą, kuris gali vykti bet kuria kryptimi." # AI Translated msgid "Bottom surface fill order" msgstr "Apatinio paviršiaus užpildymo tvarka" # AI Translated msgid "" "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" "Kryptis, kuria užpildomi apatiniai paviršiai naudojant į centrą orientuotą raštą (koncentrinį, Archimedo stygų, Oktogramos spiralės).\n" "„Į vidų“ pradeda kiekvieną paviršių platesnėmis išorinėmis kreivėmis, o tai pagerina pirmojo sluoksnio sukibimą ant pagrindų, kur ankštos kreivės centre gali nesilaikyti. „Į išorę“ prasideda centre, stumdama bet kokią perteklinę medžiagą link krašto.\n" "Numatytoji tvarka naudoja trumpiausio kelio rikiavimą, kuris gali vykti bet kuria kryptimi." msgid "Internal solid infill pattern" msgstr "Vidinio tvirto užpildo raštas" msgid "Line pattern of internal solid infill. if the detect narrow internal solid infill be enabled, the concentric pattern will be used for the small area." msgstr "Vidinio tvirto užpildo linijų raštas. Jei įjungta funkcija „Aptikti siaurą vidinį tvirtą užpildą“, mažame plote bus automatiškai naudojamas koncentrinis raštas." msgid "Line width of outer wall. If expressed as a %, it will be computed over the nozzle diameter." msgstr "Išorinės sienelės linijos plotis. Jei nurodomas procentais (%), jis apskaičiuojamas pagal purkštuko skersmenį." msgid "This is the printing speed for the outer walls of parts. These are generally printed slower than inner walls for higher quality." msgstr "Tai išorinių detalių sienelių spausdinimo greitis. Siekiant aukštesnės kokybės, jos paprastai spausdinamos lėčiau nei vidinės sienelės." msgid "Small perimeters" msgstr "Mažos trajektorijos (Small perimeters)" msgid "This separate setting will affect the speed of perimeters having radius <= small_perimeter_threshold (usually holes). If expressed as percentage (for example: 80%) it will be calculated on the outer wall speed setting above. Set to zero for auto." msgstr "Šis nustatymas valdo perimetrų, kurių spindulys $\\le$ „Mažų perimetrų riba“ (dažniausiai tai nedidelės skylės), spausdinimo greitį. Jei nurodomas procentais (pvz., 80 %), jis apskaičiuojamas pagal viršuje nustatytą išorinės sienelės greitį. Nustačius 0, greitis parandamas automatiškai." msgid "Small perimeters threshold" msgstr "Mažų perimetrų riba" msgid "This sets the threshold for small perimeter length. Default threshold is 0mm." msgstr "Nustato mažų perimetrų ilgio arba spindulio ribą. Numatytoji reikšmė – 0 mm." msgid "Small support perimeters" msgstr "Maži atramų perimetrai" msgid "Same as \"Small perimeters\", but for supports. This separate setting will affect the speed of support for areas <= `small_support_perimeter_threshold`. If expressed as a percentage (for example: 80%), it will be calculated on the support or support interface speed setting above. Set to zero for auto." msgstr "Tas pats, kas „Maži perimetrai“, bet skirta atramoms. Šis atskiras nustatymas turės įtakos atramų greičiui tose vietose, kurios yra ≤ `small_support_perimeter_threshold`. Jei išreikšta procentais (pavyzdžiui: 80 %), bus skaičiuojama nuo aukščiau nustatyto atramų arba atramų sąsajos greičio. Nustatykite nulį, jei norite naudoti automatinį režimą." msgid "Small support perimeters threshold" msgstr "Mažo atramų perimetro ribos" msgid "This sets the threshold for small support perimeter length. The default threshold is 0mm." msgstr "Nustatoma mažo atramų perimetro ilgio riba. Numatytoji riba yra 0 mm" msgid "Walls printing order" msgstr "Sienelių spausdinimo eiliškumas" msgid "" "Print sequence of the internal (inner) and external (outer) walls.\n" "\n" "Use Inner/Outer for best overhangs. This is because the overhanging walls can adhere to a neighbouring perimeter while printing. However, this option results in slightly reduced surface quality as the external perimeter is deformed by being squashed to the internal perimeter.\n" "\n" "Use Inner/Outer/Inner for the best external surface finish and dimensional accuracy as the external wall is printed undisturbed from an internal perimeter. However, overhang performance will reduce as there is no internal perimeter to print the external wall against. This option requires a minimum of 3 walls to be effective as it prints the internal walls from the 3rd perimeter onwards first, then the external perimeter and, finally, the first internal perimeter. This option is recommended against the Outer/Inner option in most cases.\n" "\n" "Use Outer/Inner for the same external wall quality and dimensional accuracy benefits of Inner/Outer/Inner option. However, the Z seams will appear less consistent as the first extrusion of a new layer starts on a visible surface." msgstr "" "Vidinių (inner) ir išorinių (outer) sienelių spausdinimo seka.\n" "\n" "„Vidinis / išorinis“ (Inner/Outer) užtikrina geriausią iškyšų kokybę, nes spausdinama iškyšos sienelė turi prie ko prisitvirtinti (prie vidinio perimetro). Tačiau išorinio paviršiaus kokybė gali nežymiai nukentėti, nes išorinis perimetras gali būti šiek tiek deformuojamas (išspaudžiamas) vidinio perimetro įtakos.\n" "\n" "„Vidinis / išorinis / vidinis“ (Inner/Outer/Inner) užtikrina geriausią išorinio paviršiaus kokybę ir matmenų tikslumą, nes išorinė sienelė spausdinama netrikdomai. Visgi, iškyšų kokybė sumažėja, nes nėra pilno vidinio pagrindo išorinei sienelei prilaikyti. Šis nustatymas efektyvus tik turint bent 3 sieneles – pjaustyklė pirmiausia spausdina vidines sieneles nuo 3-iojo perimetro gilyn, tada išorinį perimetrą, ir galiausiai pirmąjį vidinį perimetrą. Daugeliu atvejų tai yra pranašesnis pasirinkimas nei „Išorinis / vidinis“.\n" "\n" "„Išorinis / vidinis“ (Outer/Inner) suteikia panašų paviršiaus švarumą ir matmenų tikslumą kaip ir „Vidinis / išorinis / vidinis“, tačiau vertikalios siūlės (Z seam) gali atrodyti mažiau tvarkingos, nes naujas sluoksnis pradedamas spausdinti tiesiai ant matomo išorinio paviršiaus." msgid "Inner/Outer" msgstr "Vidinis / išorinis" msgid "Outer/Inner" msgstr "Išorinis / vidinis" msgid "Inner/Outer/Inner" msgstr "Vidinis / išorinis / vidinis" msgid "Print infill first" msgstr "Pirmiausia spausdinti užpildą" msgid "" "Order of wall/infill. When the tickbox is unchecked the walls are printed first, which works best in most cases.\n" "\n" "Printing infill first may help with extreme overhangs as the walls have the neighbouring infill to adhere to. However, the infill will slightly push out the printed walls where it is attached to them, resulting in a worse external surface finish. It can also cause the infill to shine through the external surfaces of the part." msgstr "" "Sienelių ir užpildo spausdinimo tvarka. Kai parinktis nepažymėta, pirmiausia spausdinamos sienelės – tai geriausias pasirinkimas daugeliu atvejų.\n" "\n" "Pirmiausia spausdinant užpildą, galima pasiekti geresnių rezultatų esant ekstremalioms iškyšoms, nes spausdinamos sienelės turi prie ko prilipti (prie gretimo užpildo krašto). Tačiau užpildas gali nežymiai išstumti išorines sieneles jų tvirtinimo vietose, todėl suprastėja išorinio paviršiaus kokybė. Taip pat užpildo struktūra gali pradėti persišviesti per išorines detalės sieneles." msgid "Wall loop direction" msgstr "Sienelių kontūro kryptis" msgid "" "The direction which the contour wall loops are extruded when looking down from the top.\n" "Holes are printed in the opposite direction to the contour to maintain alignment with layers whose contour polygons are incomplete and change direction, also partially forming the contour of a hole.\n" "\n" "This option will be disabled if spiral vase mode is enabled." msgstr "" "Kryptis, kuria ekstruduojami išorinio kontūro sienelių žiedai, žiūrint iš viršaus.\n" "Skylės yra spausdinamos priešinga kryptimi nei išorinis kontūras. Tai leidžia išlaikyti taisyklingą sluoksnių suderinamumą, kai kontūrų poligonai yra nepilni, keičia kryptį ar iš dalies formuoja skylės perimetrą.\n" "\n" "Ši parinktis automatiškai išjungiama, jei aktyvuotas „Vazos režimas“ (spiral vase)." msgid "Counter clockwise" msgstr "Prieš laikrodžio rodyklę" msgid "Clockwise" msgstr "Pagal laikrodžio rodyklę" msgid "Height to rod" msgstr "Aukštis iki ašies (strypo)" msgid "Distance from the nozzle tip to the lower rod. Used for collision avoidance in by-object printing." msgstr "Atstumas nuo purkštuko galo iki apatinio strypo. Naudojamas siekiant išvengti susidūrimų spausdinant pagal objektus." msgid "Height to lid" msgstr "Aukštis iki dangtelio" msgid "Distance from the nozzle tip to the lid. Used for collision avoidance in by-object printing." msgstr "Atstumas nuo purkštuko galiuko iki korpuso dangčio. Naudojamas siekiant išvengti spausdinimo galvutės susidūrimų, kai pasirinkta seka „Objektas po objekto“." msgid "Clearance radius around extruder: used for collision avoidance in by-object printing." msgstr "Laisvos vietos spindulys (clearance) aplink ekstruderį. Naudojamas saugaus atstumo išlaikymui spausdinant sekone „Objektas po objekto“." msgid "Nozzle height" msgstr "Purkštuko aukštis" msgid "The height of nozzle tip." msgstr "Purkštuko galiuko aukštis." msgid "Bed mesh min" msgstr "Pagrindo nelygumų žemėlapio (Mesh) min. taškas" msgid "This option sets the min point for the allowed bed mesh area. Due to the probe's XY offset, most printers are unable to probe the entire bed. To ensure the probe point does not go outside the bed area, the minimum and maximum points of the bed mesh should be set appropriately. OrcaSlicer ensures that adaptive_bed_mesh_min/adaptive_bed_mesh_max values do not exceed these min/max points. This information can usually be obtained from your printer manufacturer. The default setting is (-99999, -99999), which means there are no limits, thus allowing probing across the entire bed." msgstr "Šis nustatymas nurodo minimalų tašką leistinoje pagrindo niveliavimo (mesh) srityje. Dėl jutiklio (zondo) XY poslinkio purkštuko atžvilgiu, dauguma spausdintuvų fiziškai negali išmatuoti viso stalo paviršiaus. Kad jutiklis neišvažiuotų už stalo ribų, minimalūs ir maksimalūs taškai turi būti nustatyti tiksliai. „OrcaSlicer“ užtikrina, kad adaptyvaus niveliavimo ribos („adaptive_bed_mesh_min/max“) neviršytų šių reikšmių. Šiuos duomenis paprastai pateikia spausdintuvo gamintojas. Numatytasis nustatymas (-99999, -99999) reiškia, kad jokie limitai netaikomi ir jutikliui leidžiama judėti per visą plotą." msgid "Bed mesh max" msgstr "Pagrindo nelygumų žemėlapio (Mesh) maks. taškas" msgid "This option sets the max point for the allowed bed mesh area. Due to the probe's XY offset, most printers are unable to probe the entire bed. To ensure the probe point does not go outside the bed area, the minimum and maximum points of the bed mesh should be set appropriately. OrcaSlicer ensures that adaptive_bed_mesh_min/adaptive_bed_mesh_max values do not exceed these min/max points. This information can usually be obtained from your printer manufacturer. The default setting is (99999, 99999), which means there are no limits, thus allowing probing across the entire bed." msgstr "Šis nustatymas nurodo maksimalų tašką leistinoje pagrindo niveliavimo (mesh) srityje. Dėl jutiklio (zondo) XY poslinkio purkštuko atžvilgiu, dauguma spausdintuvų fiziškai negali išmatuoti viso stalo paviršiaus. Kad jutiklis neišvažiuotų už stalo ribų, minimalūs ir maksimalūs taškai turi būti nustatyti tiksliai. „OrcaSlicer“ užtikrina, kad adaptyvaus niveliavimo ribos („adaptive_bed_mesh_min/max“) neviršytų šių reikšmių. Šiuos duomenis paprastai pateikia spausdintuvo gamintojas. Numatytasis nustatymas (99999, 99999) reiškia, kad jokie limitai netaikomi ir jutikliui leidžiama judėti per visą plotą." msgid "Probe point distance" msgstr "Atstumas iki zondo taško" msgid "This option sets the preferred distance between probe points (grid size) for the X and Y directions, with the default being 50mm for both X and Y." msgstr "Nustato pageidaujamą atstumą tarp matavimo taškų (tinklelio tankį) X ir Y kryptimis. Numatytasis atstumas abiem kryptimis yra 50 mm." msgid "Mesh margin" msgstr "Niveliavimo zonos paraštė (Mesh margin)" msgid "This option determines the additional distance by which the adaptive bed mesh area should be expanded in the XY directions." msgstr "Šis nustatymas nurodo papildomą atstumą, kuriuo XY kryptimis išplečiama adaptyvaus pagrindo niveliavimo (mesh) sritis." msgid "Grab length" msgstr "Sugriebimo ilgis (Grab length)" msgid "Extruder Color" msgstr "Ekstruderio spalva" msgid "Only used as a visual help on UI." msgstr "Naudojama tik kaip vaizdinė pagalba naudotojo sąsajoje." msgid "Extruder offset" msgstr "Ekstruderio poslinkis (offset)" msgid "The material may have volumetric change after switching between molten and crystalline states. This setting changes all extrusion flow of this filament in G-code proportionally. The recommended value range is between 0.95 and 1.05. You may be able to tune this value to get a nice flat surface if there is slight overflow or underflow." msgstr "Pereidama iš išsilydžiusios būsenos į kristalinę, medžiaga gali pakeisti savo tūrį. Šis nustatymas proporcingai koreguoja visą šio plastiko (gijos) srautą G-kode. Rekomenduojamas rėžis yra tarp 0,95 ir 1,05. Pastebėjus nedidelį plastiko perteklių ar trūkumą, šią reikšmę galima suderinti idealiai lygiam paviršiui gauti." msgid "" "The material may have volumetric change after switching between molten and crystalline states. This setting changes all extrusion flow of this filament in G-code proportionally. The recommended value range is between 0.95 and 1.05. You may be able to tune this value to get a nice flat surface if there is slight overflow or underflow.\n" "\n" "The final object flow ratio is this value multiplied by the filament flow ratio." msgstr "" "Pereidama iš išsilydžiusios būsenos į kristalinę, medžiaga gali pakeisti savo tūrį. Šis nustatymas proporcingai koreguoja visą šio plastiko (gijos) srautą G-kode. Rekomenduojamas rėžis yra tarp 0,95 ir 1,05. Pastebėjus nedidelį plastiko perteklių ar trūkumą, šią reikšmę galima suderinti idealiai lygiam paviršiui gauti.\n" "\n" "Galutinis objekto srauto koeficientas gaunamas šią reikšmę padauginus iš plastiko srauto koeficiento (filament flow ratio)." msgid "Enable pressure advance" msgstr "Įjungti slėgio kompensavimą (Pressure Advance)" msgid "Enable pressure advance, auto calibration result will be overwritten once enabled." msgstr "Įjungia slėgio kompensavimą (Pressure Advance). Jį aktyvavus, automatinio kalibravimo rezultatai bus nepaisomi." msgid "Pressure advance (Klipper) AKA Linear advance factor (Marlin)." msgstr "Slėgio kompensavimas (Pressure Advance „Klipper“ mikroprogramoje) arba linijinis kompensavimas (Linear Advance „Marlin“ mikroprogramoje)." msgid "Enable adaptive pressure advance (beta)" msgstr "Įjungti adaptyvų slėgio kompensavimą (beta)" #, no-c-format, no-boost-format msgid "" "With increasing print speeds (and hence increasing volumetric flow through the nozzle) and increasing accelerations, it has been observed that the effective PA value typically decreases. This means that a single PA value is not always 100% optimal for all features and a compromise value is usually used that does not cause too much bulging on features with lower flow speed and accelerations while also not causing gaps on faster features.\n" "\n" "This feature aims to address this limitation by modeling the response of your printer's extrusion system depending on the volumetric flow speed and acceleration it is printing at. Internally, it generates a fitted model that can extrapolate the needed pressure advance for any given volumetric flow speed and acceleration, which is then emitted to the printer depending on the current print conditions.\n" "\n" "When enabled, the pressure advance value above is overridden. However, a reasonable default value above is strongly recommended to act as a fallback and for when tool changing.\n" "\n" msgstr "" "Pastebėta, kad didėjant spausdinimo greičiui (kartu ir tūriniam srautui per purkštuką) bei didėjant pagreičiui, efektyvioji PA (Pressure Advance) reikšmė dažniausiai mažėja. Tai reiškia, kad viena statinė PA reikšmė nėra 100 % optimali visiems elementams – dažniausiai tenka rinktis kompromisą, kuris nesukeltų kampų išsipūtimo važiuojant lėčiau, bet ir nepaliktų tuščių tarpų spausdinant greitai.\n" "\n" "Ši funkcija sprendžia minėtą problemą: ji modeliuoja spausdintuvo ekstruzijos sistemos elgseną pagal esamą tūrinį srautą bei pagreitį. Algoritmas sukuria matematinį modelį, leidžiantį ekstrapoliuoti tikslią reikalingą PA reikšmę bet kokiam greičiui ar pagreičiui, ir dinamiškai siunčia ją į spausdintuvą realiu laiku.\n" "\n" "Šią funkciją įjungus, viršuje įvesta statinė PA reikšmė bus nepaisoma. Vis dėlto, rekomenduojama ten palikti protingą numatytąją reikšmę, kuri pasitarnautų kaip atsarginė (fallback) keičiant narvelius / įrankius.\n" msgid "Adaptive pressure advance measurements (beta)" msgstr "Adaptyvaus slėgio kompensavimo (PA) matavimai (beta)" #, no-c-format, no-boost-format msgid "" "Add sets of pressure advance (PA) values, the volumetric flow speeds and accelerations they were measured at, separated by a comma. One set of values per line. For example\n" "0.04,3.96,3000\n" "0.033,3.96,10000\n" "0.029,7.91,3000\n" "0.026,7.91,10000\n" "\n" "How to calibrate:\n" "1. Run the pressure advance test for at least 3 speeds per acceleration value. It is recommended that the test is run for at least the speed of the external perimeters, the speed of the internal perimeters and the fastest feature print speed in your profile (usually its the sparse or solid infill). Then run them for the same speeds for the slowest and fastest print accelerations, and no faster than the recommended maximum acceleration as given by the Klipper input shaper\n" "2. Take note of the optimal PA value for each volumetric flow speed and acceleration. You can find the flow number by selecting flow from the color scheme drop down and move the horizontal slider over the PA pattern lines. The number should be visible at the bottom of the page. The ideal PA value should be decreasing the higher the volumetric flow is. If it is not, confirm that your extruder is functioning correctly. The slower and with less acceleration you print, the larger the range of acceptable PA values. If no difference is visible, use the PA value from the faster test\n" "3. Enter the triplets of PA values, Flow and Accelerations in the text box here and save your filament profile." msgstr "" "Įveskite slėgio kompensavimo (PA) reikšmių rinkinius, nurodydami tūrinį srautą bei pagreitį, prie kurių jie buvo išmatuoti, atskirdami kableliais. Vienoje eilutėje – vienas trejetas. Pavyzdžiui:\n" "0.04,3.96,3000\n" "0.033,3.96,10000\n" "0.029,7.91,3000\n" "0.026,7.91,10000\n" "\n" "Kaip kalibruoti:\n" "1. Paleiskite „Pressure Advance“ testą bent 3 skirtingiems greičiams su kiekviena pasirinkta pagreičio reikšme. Rekomenduojama testuoti greičius, atitinkančius išorines sieneles, vidines sieneles ir greičiausiai spausdinamus elementus (dažniausiai tai retasis arba tvirtasis užpildas). Atlikite testus su mažiausiu bei didžiausiu profilio pagreičiu (nepaviršijant maksimalaus saugaus pagreičio, kurį nurodo jūsų „Klipper Input Shaper“).\n" "2. Užfiksuokite optimalią PA reikšmę kiekvienam tūriniam srautui ir pagreičiui. Tikslų srauto skaičių (Flow) sužinosite peržiūros lange spalvų schemoje pasirinkę „Flow“ ir vedžiodami horizontalųjį slankiklį virš atspausdinto PA šablono linijų. Skaičius rodomas puslapio apačioje. Idealiu atveju PA reikšmė turėtų mažėti didėjant tūriniam srautui. Jei taip nėra, patikrinkite, ar ekstruderis veikia sklandžiai. Spausdinant lėčiau ir su mažesniu pagreičiu, tinkamų PA reikšmių rėžis yra platesnis – jei vizualiai skirtumo nematyti, rinkitės greitesnio testo rezultatą.\n" "3. Įveskite gautus PA, srauto (Flow) ir pagreičio trejetus į šį teksto lauką ir išsaugokite plastiko profilį." msgid "Enable adaptive pressure advance within features (beta)" msgstr "Įjungti adaptyvų slėgio kompensavimą (beta)" msgid "" "Enable adaptive PA whenever there are flow changes in a feature, such as line width changes in a corner or overhangs.\n" "\n" "Not compatible with Prusa printers as they pause to process PA changes, which causes delays and defects.\n" "\n" "This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues." msgstr "" "Įjunkite „Adaptive PA“, kai funkcijoje pasikeičia srautas, pavyzdžiui, keičiantis linijos pločiui kampuose arba iškyšose.\n" "\n" "Nėra suderinama su „Prusa“ spausdintuvais, nes jie pristabdo darbą PA pakeitimams apdoroti, o tai sukelia vėlavimą ir defektus.\n" "\n" "Tai eksperimentinė parinktis, nes jei PA profilis nenustatytas tiksliai, kils vienodumo problemų." msgid "Static pressure advance for bridges" msgstr "Tiltų slėgio kompensavimas (PA)" msgid "" "Static pressure advance value for bridges. Set to 0 to apply the same pressure advance as \n" "equivalent walls (using adaptive settings if enabled).\n" "\n" "A lower PA value when printing bridges helps reduce the appearance of slight under-extrusion immediately after bridges. This is caused by the pressure drop in the nozzle when printing in the air and a lower PA helps counteract this." msgstr "" "Statinė slėgio kompensavimo (angl. \"pressure advance\") reikšmė tiltams. Nustatykite 0, kad būtų taikomas toks pat slėgio kompensavimas kaip ir analogiškoms sienelėms (naudojant adaptyvius nustatymus, jei jie įjungti).\n" "\n" "Mažesnė PA reikšmė spausdinant tiltus padeda sumažinti nedidelio nepakankamo ekstruzijos kiekio (angl. \"under-extrusion\") pasireiškimą iškart po tiltų. Tai sukelia slėgio kritimas purkštuke spausdinant „ore“, o mažesnė PA reikšmė padeda tai kompensuoti." msgid "Default line width if other line widths are set to 0. If expressed as a %, it will be computed over the nozzle diameter." msgstr "Numatytasis linijos plotis, jei kitų linijų pločiai nustatyti į 0. Jei nurodoma procentais (%), reikšmė apskaičiuojama pagal purkštuko skersmenį." msgid "Keep fan always on" msgstr "Visada laikyti ventiliatorių įjungtą" msgid "Enabling this setting means that part cooling fan will never stop entirely and will instead run at least at minimum speed to reduce the frequency of starting and stopping." msgstr "Aktyvavus šį nustatymą, detalės aušinimo ventiliatorius niekada visiškai nesustos ir suksis bent minimaliu greičiu – tai sumažina nuolatinio ventiliatoriaus stabdymo ir paleidimo dažnį." msgid "Don't slow down outer walls" msgstr "Nelėtinti išorinių sienelių" msgid "" "If enabled, this setting will ensure external perimeters are not slowed down to meet the minimum layer time. This is particularly helpful in the below scenarios:\n" "1. To avoid changes in shine when printing glossy filaments\n" "2. To avoid changes in external wall speed which may create slight wall artifacts that appear like Z banding\n" "3. To avoid printing at speeds which cause VFAs (fine artifacts) on the external walls" msgstr "" "Jei įjungta, šis nustatymas užtikrins, kad išorinių sienelių spausdinimas nebūtų lėtinamas siekiant išlaikyti minimalų sluoksnio aušinimo laiką. Tai ypač naudinga šiais atvejais:\n" "1. Norint išvengti blizgumo netolygumų spausdinant blizgiais (glossy) plastikais.\n" "2. Norint išvengti išorinių sienelių spausdinimo greičio šuolių, kurie sukelia smulkius paviršiaus defektus, panašius į Z ašies netolygumus (Z banding).\n" "3. Norint išvengti tokių greičių, kurie ant išorinių sienelių sukelia VFA (smulkius periodinius virpesių artefaktus)." msgid "Layer time" msgstr "Sluoksnio laikas" msgid "The part cooling fan will be enabled for layers where the estimated time is shorter than this value. Fan speed is interpolated between the minimum and maximum fan speeds according to layer printing time." msgstr "Detalės aušinimo ventiliatorius bus suaktyvintas tiems sluoksniams, kurių preliminarus spausdinimo laikas yra trumpesnis už šią reikšmę. Ventiliatoriaus sūkiai bus interpoliuojami tarp minimalaus ir maksimalaus greičio, priklausomai nuo sluoksnio spausdinimo trukmės." msgid "s" msgstr "s" msgid "Default color" msgstr "Numatytoji spalva" msgid "" "Default filament color.\n" "Right click to reset value to system default." msgstr "" "Numatytoji gijos spalva.\n" "Spustelėkite dešiniuoju pelės mygtuku, kad atkurtumėte sistemos numatytąją reikšmę." msgid "Filament notes" msgstr "Gijos pastabos" msgid "You can put your notes regarding the filament here." msgstr "Čia galite įdėti pastabas apie giją." msgid "Required nozzle HRC" msgstr "Reikalaujamas purkštuko HRC" msgid "Minimum HRC of nozzle required to print the filament. A value of 0 means no checking of the nozzle's HRC." msgstr "Minimalus purkštuko HRC, reikalingas spausdinti šia gija. Nulis reiškia, kad purkštuko HRC netikrinama." msgid "Filament map to extruder" msgstr "Gijos susiejimas su ekstruderiu" msgid "Filament map to extruder." msgstr "Gijos susiejimas su ekstruderiu." msgid "Auto For Flush" msgstr "Automatiškai pravalymui" msgid "Auto For Match" msgstr "Automatiškai pritaikymui" # AI Translated msgid "Nozzle Manual" msgstr "Purkštuko instrukcija" msgid "Flush temperature" msgstr "Pravalymo temperatūra" msgid "Temperature when flushing filament. 0 indicates the upper bound of the recommended nozzle temperature range." msgstr "Temperatūra pravalant giją. 0 nurodo viršutinę rekomenduojamos purkštuko temperatūros diapazono ribą." # AI Translated msgid "Flush temperature used in fast purge mode." msgstr "Pravalymo temperatūra, naudojama greitojo pravalymo režime." msgid "Flush volumetric speed" msgstr "Pravalymo tūrinis greitis" msgid "Volumetric speed when flushing filament. 0 indicates the max volumetric speed." msgstr "Tūrinis greitis pravalant giją. 0 nurodo maksimalų tūrinį greitį." msgid "This setting is the volume of filament that can be melted and extruded per second. Printing speed is limited by max volumetric speed, in case of too high and unreasonable speed setting. This value cannot be zero." msgstr "Gijos tūris, kurį galima išlydyti ir išspausti per sekundę. Jei nustatytas per didelis ir nepagrįstas greitis, spausdinimo greitį riboja maksimalus tūrinis greitis. Ši reikšmė negali būti lygi nuliui" msgid "Filament load time" msgstr "Gijos įkrovimo laikas" msgid "Time to load new filament when switch filament. It's usually applicable for single-extruder multi-material machines. For tool changers or multi-tool machines, it's typically 0. For statistics only." msgstr "Naujos gijos įkrovimo laikas, kai perjungiama gija. Tai paprastai taikoma vieno ekstruderio kelių medžiagų įrenginiams. Įrankių keitikliams ar kelių įrankių įrenginiams šis laikas paprastai yra 0. Naudojama tik statistikai." msgid "Filament unload time" msgstr "Gijos iškrovimo laikas" msgid "Time to unload old filament when switch filament. It's usually applicable for single-extruder multi-material machines. For tool changers or multi-tool machines, it's typically 0. For statistics only." msgstr "Senos gijos iškrovimo laikas, kai perjungiama gija. Tai paprastai taikoma vieno ekstruderio kelių medžiagų įrenginiams. Įrankių keitikliams ar kelių įrankių įrenginiams šis laikas paprastai yra 0. Naudojama tik statistikai." msgid "Tool change time" msgstr "Įrankių keitimo laikas" msgid "Time taken to switch tools. It's usually applicable for tool changers or multi-tool machines. For single-extruder multi-material machines, it's typically 0. For statistics only." msgstr "Įrankių keitimo laikas. Jis paprastai taikomas įrankių keitimo įrenginiams arba daugiafunkcinėms staklėms. Vieno ekstruderio kelių medžiagų mašinoms jis paprastai lygus 0. Tik statistiniams duomenims." msgid "Bed temperature type" msgstr "Pagrindo temperatūros tipas" msgid "This option determines how the bed temperature is set during slicing: based on the temperature of the first filament or the highest temperature of the printed filaments." msgstr "Ši parinktis nustato, kaip pjaustymo metu nustatoma pagrindo temperatūra: pagal pirmosios gijos temperatūrą arba pagal aukščiausią spausdinamų gijų temperatūrą." msgid "By First filament" msgstr "Pagal pirmąją giją" msgid "By Highest Temp" msgstr "Pagal aukščiausią temperatūrą" msgid "Filament diameter is used to calculate extrusion variables in G-code, so it is important that this is accurate and precise." msgstr "G-kodo ekstruzijos apskaičiavimui naudojamas gijos skersmuo, todėl jis yra svarbus ir turi būti tikslus." msgid "Pellet flow coefficient" msgstr "Granulių srauto koeficientas" msgid "" "Pellet flow coefficient is empirically derived and allows for volume calculation for pellet printers.\n" "\n" "Internally it is converted to filament_diameter. All other volume calculations remain the same.\n" "\n" "filament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )" msgstr "" "Granulių srauto koeficientas nustatomas empiriškai ir leidžia apskaičiuoti granulių spausdintuvų tūrį.\n" "\n" "Programos viduje jis konvertuojamas į filament_diameter. Visi kiti tūrio skaičiavimai išlieka tokie patys.\n" "\n" "filament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )" msgid "Adaptive volumetric speed" msgstr "Prisitaikantis tūrinis greitis" msgid "" "When enabled, the extrusion flow is limited by the smaller of the fitted value (calculated from line width and layer height) and the user-defined maximum flow. When disabled, only the user-defined maximum flow is applied.\n" "\n" "Note: Experimental and incomplete feature imported from BBS. Functional for some profiles that already have the variable saved." msgstr "" "Kai įjungta, ekstruzijos srautas ribojamas pasirinkus mažesnę reikšmę iš pritaikytosios (apskaičiuotos pagal linijos plotį ir sluoksnio aukštį) bei vartotojo nurodyto maksimalaus srauto. Kai išjungta, taikomas tik vartotojo nurodytas maksimalus srautas.\n" "\n" "Pastaba: eksperimentinė ir nebaigta funkcija, perkelta iš BBS. Veikia tik su tam tikrais profiliais, kurie jau turi išsaugotą šį kintamąjį." msgid "Max volumetric speed multinomial coefficients" msgstr "Maksimalaus tūrinio greičio daugianario koeficientai" msgid "Shrinkage (XY)" msgstr "Susitraukimas (XY)" #, no-c-format, no-boost-format msgid "" "Enter the shrinkage percentage that the filament will get after cooling (94% if you measure 94mm instead of 100mm). The part will be scaled in XY to compensate. For multi-material prints, ensure filament shrinkage matches across all used filaments\n" "Be sure to allow enough space between objects, as this compensation is done after the checks." msgstr "" "Įveskite susitraukimo procentą, kurį gija pasieks po aušinimo (pvz., 94%, jei vietoj 100 mm išmatuojate 94 mm). Detalės mastelis bus pakeistas XY ašyse, kad tai kompensuotų. Spausdinant iš kelių medžiagų, įsitikinkite, kad visų naudojamų gijų susitraukimas sutampa.\n" "Būtinai palikite pakankamai vietos tarp objektų, nes ši kompensacija atliekama po patikrinimų." msgid "Shrinkage (Z)" msgstr "Susitraukimas (Z)" #, no-c-format, no-boost-format msgid "Enter the shrinkage percentage that the filament will get after cooling (94% if you measure 94mm instead of 100mm). The part will be scaled in Z to compensate." msgstr "Įveskite susitraukimo procentą, kurį gija pasieks po aušinimo (pvz., 94%, jei vietoj 100 mm išmatuojate 94 mm). Detalės mastelis bus pakeistas Z ašyje, kad tai kompensuotų." msgid "Adhesiveness Category" msgstr "Sukibimo kategorija" msgid "Filament category." msgstr "Gijos kategorija." msgid "Loading speed" msgstr "Įkrovimo greitis" msgid "Speed used for loading the filament on the wipe tower." msgstr "Greitis, naudojamas gijos įkrovimui ant valymo bokštelio." msgid "Loading speed at the start" msgstr "Įkrovimo greitis pradžioje" msgid "Speed used at the very beginning of loading phase." msgstr "Greitis, naudojamas pačioje įkrovimo fazės pradžioje." msgid "Unloading speed" msgstr "Iškrovimo greitis" msgid "Speed used for unloading the filament on the wipe tower (does not affect initial part of unloading just after ramming)." msgstr "Greitis, naudojamas gijos iškrovimui ant valymo bokštelio (neturi įtakos pradinei iškrovimo daliai iškart po gijos suformavimo/lyginimo)." msgid "Unloading speed at the start" msgstr "Iškrovimo greitis pradžioje" msgid "Speed used for unloading the tip of the filament immediately after ramming." msgstr "Greitis, naudojamas gijos galiuko iškrovimui iškart po suformavimo (ramming)." msgid "Delay after unloading" msgstr "Delsa po iškrovimo" msgid "Time to wait after the filament is unloaded. May help to get reliable tool changes with flexible materials that may need more time to shrink to original dimensions." msgstr "Laukimo laikas po to, kai gija iškraunama. Tai gali padėti užtikrinti patikimą įrankių keitimą naudojant lanksčias medžiagas, kurioms reikia daugiau laiko susitraukti iki pradinių matmenų." msgid "Number of cooling moves" msgstr "Aušinimo judesių skaičius" msgid "Filament is cooled by being moved back and forth in the cooling tubes. Specify desired number of these moves." msgstr "Gija aušinama judant pirmyn ir atgal aušinimo vamzdeliuose. Nurodykite pageidaujamą šių judesių skaičių." msgid "Stamping loading speed" msgstr "Štampavimo (stamping) įkrovimo greitis" msgid "Speed used for stamping." msgstr "Greitis, naudojamas štampavimui." msgid "Stamping distance measured from the center of the cooling tube" msgstr "Štampavimo atstumas, matuojamas nuo aušinimo vamzdelio centro" msgid "If set to non-zero value, filament is moved toward the nozzle between the individual cooling moves (\"stamping\"). This option configures how long this movement should be before the filament is retracted again." msgstr "Jei nustatyta nenulinė reikšmė, gija tarp atskirų aušinimo judesių pastumiama link purkštuko („štampavimas“). Ši parinktis konfigūruoja, kokio ilgio turi būti šis judesys prieš vėl įtraukiant giją." msgid "Speed of the first cooling move" msgstr "Pirmojo aušinimo judesio greitis" msgid "Cooling moves are gradually accelerating beginning at this speed." msgstr "Aušinimo judesiai palaipsniui greitėja, pradedant tokiu greičiu." msgid "Minimal purge on wipe tower" msgstr "Minimalus valymas ant šluostymo bokštelio" msgid "After a tool change, the exact position of the newly loaded filament inside the nozzle may not be known, and the filament pressure is likely not yet stable. Before purging the print head into an infill or a sacrificial object, Orca Slicer will always prime this amount of material into the wipe tower to produce successive infill or sacrificial object extrusions reliably." msgstr "Pakeitus įrankį, tiksli naujai įkrautos gijos padėtis purkštuke gali būti nežinoma, o slėgis gijoje greičiausiai dar nėra stabilus. Prieš nukreipiant spausdinimo galvutės prapūtimą į užpildą arba pagalbinį objektą, „OrcaSlicer“ visada paruoš šį medžiagos kiekį valymo bokštelyje, kad būtų patikimai suformuoti tolesni užpildo ar pagalbinio objekto sluoksniai." msgid "Wipe tower cooling" msgstr "Valymo bokštelio aušinimas" msgid "Temperature drop before entering filament tower" msgstr "Temperatūros sumažinimas prieš įeinant į gijos bokštelį" msgid "Interface layer pre-extrusion distance" msgstr "Skiriamojo sluoksnio pradinio išspaudimo atstumas" msgid "Pre-extrusion distance for prime tower interface layer (where different materials meet)." msgstr "Pradinio išspaudimo atstumas paruošimo bokštelio skiriamajam sluoksniui (kur susitinka skirtingos medžiagos)." msgid "Interface layer pre-extrusion length" msgstr "Skiriamojo sluoksnio pradinio išspaudimo ilgis" msgid "Pre-extrusion length for prime tower interface layer (where different materials meet)." msgstr "Pradinio išspaudimo ilgis paruošimo bokštelio skiriamajam sluoksniui (kur susitinka skirtingos medžiagos)." msgid "Tower ironing area" msgstr "Bokštelio lyginimo plotas" msgid "Ironing area for prime tower interface layer (where different materials meet)." msgstr "Lyginimo plotas paruošimo bokštelio skiriamajam sluoksniui (kur susitinka skirtingos medžiagos)." msgid "mm²" msgstr "mm²" msgid "Interface layer purge length" msgstr "Skiriamojo sluoksnio pravalymo ilgis" msgid "Purge length for prime tower interface layer (where different materials meet)." msgstr "Pravalymo ilgis paruošimo bokštelio skiriamajam sluoksniui (kur susitinka skirtingos medžiagos)." msgid "Interface layer print temperature" msgstr "Skiriamojo sluoksnio spausdinimo temperatūra" msgid "Print temperature for prime tower interface layer (where different materials meet). If set to -1, use max recommended nozzle temperature." msgstr "Spausdinimo temperatūra paruošimo bokštelio skiriamajam sluoksniui (kur susitinka skirtingos medžiagos). Jei nustatyta -1, naudojama maksimali rekomenduojama purkštuko temperatūra." msgid "Speed of the last cooling move" msgstr "Paskutinio aušinimo judesio greitis" msgid "Cooling moves are gradually accelerating towards this speed." msgstr "Aušinimo judesiai palaipsniui greitėja link šio greičio." msgid "Ramming parameters" msgstr "Gijos suformavimo (ramming) parametrai" msgid "This string is edited by RammingDialog and contains ramming specific parameters." msgstr "Šią eilutę redaguoja RammingDialog lange ir joje yra specifiniai gijos suformavimo (ramming) parametrai." msgid "Enable ramming for multi-tool setups" msgstr "Įjungti gijos suformavimą (ramming) kelių įrankių konfigūracijoms" msgid "Perform ramming when using multi-tool printer (i.e. when the 'Single Extruder Multimaterial' in Printer Settings is unchecked). When checked, a small amount of filament is rapidly extruded on the wipe tower just before the tool change. This option is only used when the wipe tower is enabled." msgstr "Atlikti gijos suformavimą (ramming), kai naudojamas kelių įrankių spausdintuvas (t. y., kai spausdintuvo nustatymuose nepažymėta parinktis „Vienas ekstruderis, kelios medžiagos“). Kai pažymėta, nedidelis gijos kiekis yra greitai išspaudžiamas ant valymo bokštelio prieš pat įrankio keitimą. Ši parinktis naudojama tik tada, kai įjungtas valymo bokštelis." msgid "Multi-tool ramming volume" msgstr "Kelių įrankių gijos suformavimo (ramming) tūris" msgid "The volume to be rammed before the tool change." msgstr "Tūris, kuris turi būti suformuotas (rammed) prieš keičiant įrankį." msgid "Multi-tool ramming flow" msgstr "Kelių įrankių gijos suformavimo (ramming) srautas" msgid "Flow used for ramming the filament before the tool change." msgstr "Srautas, naudojamas gijos suformavimui (ramming) prieš keičiant įrankį." msgid "Density" msgstr "Tankis" msgid "Filament density, for statistical purposes only." msgstr "Gijų tankis, tik statistikai" msgid "g/cm³" msgstr "g/cm³" msgid "Filament material type" msgstr "Gijos medžiagos tipas" msgid "Soluble material" msgstr "Tirpi gija" msgid "Soluble material is commonly used to print supports and support interfaces." msgstr "Tirpi gija paprastai naudojama spausdinant atramas ir atramų skiriamuosius sluoksnius." msgid "Filament ramming length" msgstr "Gijos suformavimo (ramming) ilgis" msgid "When changing the extruder, it is recommended to extrude a certain length of filament from the original extruder. This helps minimize nozzle oozing." msgstr "Keičiant ekstruderį, rekomenduojama išspausti tam tikrą gijos ilgį iš pradinio ekstruderio. Tai padeda sumažinti medžiagos varvėjimą iš purkštuko." msgid "Support material" msgstr "Atramų gija" msgid "Support material is commonly used to print supports and support interfaces." msgstr "Atramų gija paprastai naudojama atramoms ir atramų skiriamiesiems sluoksniams spausdinti." msgid "Filament printable" msgstr "Gija tinkama spausdinti" msgid "The filament is printable in extruder." msgstr "Gija yra tinkama spausdinti pasirinktame ekstruderyje." # AI Translated msgid "Filament-extruder compatibility" msgstr "Gijos ir ekstruderio suderinamumas" # AI Translated msgid "A single 32-bit int encoding the compatibility level of a filament across all extruders (up to 10). Every 3 bits represent one extruder (bits [3*i, 3*i+2] for extruder i). 0: printable, 1: error, 2: critical warning, 3: warning, 4-7: reserved." msgstr "Vienas 32 bitų sveikasis skaičius, koduojantis gijos suderinamumo lygį su visais ekstruderiais (iki 10). Kiekvieni 3 bitai atitinka vieną ekstruderį (bitai [3*i, 3*i+2] ekstruderiui i). 0: spausdinama, 1: klaida, 2: kritinis įspėjimas, 3: įspėjimas, 4–7: rezervuota." msgid "Softening temperature" msgstr "Minkštėjimo temperatūra" msgid "The material softens at this temperature, so when the bed temperature is equal to or greater than this, it's highly recommended to open the front door and/or remove the upper glass to avoid clogs." msgstr "Esant tokiai temperatūrai medžiaga suminkštėja, todėl, kai pagrindo temperatūra yra lygi arba didesnė už ją, labai rekomenduojama atidaryti priekines dureles ir (arba) nuimti viršutinį stiklą, kad būtų išvengta užsikimšimo." msgid "Price" msgstr "Kaina" msgid "Filament price, for statistical purposes only." msgstr "Gijos kaina, tik statistikai." msgid "money/kg" msgstr "pinigų/kg" msgid "Vendor" msgstr "Prekės ženklas" msgid "Vendor of filament. For show only." msgstr "Gijos prekės ženklas. Tik parodymui." msgid "(Undefined)" msgstr "(Nenurodyta)" msgid "Sparse infill direction" msgstr "Reto užpildo kryptis" msgid "This is the angle for sparse infill pattern, which controls the start or main direction of lines." msgstr "Reto užpildymo rašto kampas, kuriuo nustatoma linijų pradžios arba pagrindinė kryptis" msgid "Solid infill direction" msgstr "Vientiso užpildo kryptis" msgid "Angle for solid infill pattern, which controls the start or main direction of line." msgstr "Vientiso užpildo rašto kampas, kuris valdo linijos pradžią arba pagrindinę kryptį." msgid "Top layer direction" msgstr "Viršutinio sluoksnio kryptis" msgid "" "Fixed angle for the top solid infill and ironing lines.\n" "Set to -1 to follow the default solid infill direction." msgstr "" "Fiksuotas viršutinio vientiso užpildo ir lyginimo (angl. \"ironing\") linijų kampas.\n" "Nustatykite -1, jei norite naudoti numatytąją vientiso užpildo kryptį." msgid "Bottom layer direction" msgstr "Apatinio sluoksnio kryptis" msgid "" "Fixed angle for the bottom solid infill lines.\n" "Set to -1 to follow the default solid infill direction." msgstr "" "Fiksuotas apatinio vientiso užpildo linijų kampas.\n" "Nustatykite -1, jei norite naudoti numatytąją vientiso užpildo kryptį." msgid "Sparse infill density" msgstr "Reto užpildo tankis" #, no-c-format, no-boost-format msgid "Density of internal sparse infill, 100% turns all sparse infill into solid infill and internal solid infill pattern will be used." msgstr "Vidinio reto užpildo tankis. 100% paverčia visą retą užpildą vientisu užpildu ir tuomet bus naudojamas vidinio vientiso užpildo raštas." # AI Translated msgid "Align directions to model" msgstr "Lygiuoti kryptis pagal modelį" # AI Translated msgid "" "Aligns infill, bridge, ironing, and top/bottom surface directions to follow the model's orientation on the build plate.\n" "When enabled, these directions rotate together with the model so the printed features keep their intended orientation relative to the part, preserving optimal strength and surface characteristics regardless of how the model is placed." msgstr "" "Lygiuoja užpildo, tilto, lyginimo ir viršutinio/apatinio paviršiaus kryptis pagal modelio orientaciją ant pagrindo.\n" "Kai įjungta, šios kryptys sukasi kartu su modeliu, todėl spausdintos detalės išlaiko numatytą orientaciją detalės atžvilgiu, išsaugant optimalų stiprumą ir paviršiaus savybes nepriklausomai nuo to, kaip modelis padėtas." msgid "Insert solid layers" msgstr "Įterpti vientisus sluoksnius" msgid "Insert solid infill at specific layers. Use N to insert every Nth layer, N#K to insert K consecutive solid layers every N layers (K is optional, e.g. '5#' equals '5#1'), or a comma-separated list (e.g. 1,7,9) to insert at explicit layers. Layers are 1-based." msgstr "Įterpti vientisą užpildą tam tikruose sluoksniuose. Naudokite N, kad įterptumėte kas N-tą sluoksnį, N#K, kad įterptumėte K iš eilės einančių vientisų sluoksnių kas N sluoksnių (K yra neprivalomas, pvz., „5#“ atitinka „5#1“), arba kableliais atskirtą sąrašą (pvz., 1,7,9), kad įterptumėte konkrečiuose sluoksniuose. Sluoksniai skaičiuojami nuo 1." msgid "Fill Multiline" msgstr "Užpildyti kelias eilutes" msgid "Using multiple lines for the infill pattern, if supported by infill pattern." msgstr "Kelių linijų naudojimas užpildo raštui, jei tai palaiko pats užpildo raštas." msgid "Z-buckling bias optimization (experimental)" msgstr "Z ašies išklumpavimo (buckling) optimizavimas (eksperimentinis)" #, no-c-format, no-boost-format msgid "Tightens the gyroid wave along the Z (vertical) axis at low infill density to shorten the effective vertical column length and improve Z-axis compression buckling resistance. Filament use is preserved. No effect at ~30% sparse infill density and above. Only applies when Sparse infill pattern is set to Gyroid." msgstr "Sutankina giroido bangą išilgai Z (vertikalios) ašies esant mažam užpildo tankiui, kad sutrumpėtų efektyvusis vertikalios kolonėlės ilgis ir pagerėtų atsparumas gniuždymui bei išklumpavimui (buckling) išilgai Z ašies. Gijos sąnaudos išlieka tokios pačios. Neturi įtakos esant ~30% ar didesniam reto užpildo tankiui. Taikoma tik tada, kai reto užpildo raštas nustatytas kaip Giroidas." msgid "Sparse infill pattern" msgstr "Reto užpildo raštas" msgid "This is the line pattern for internal sparse infill." msgstr "Linijų raštas vidiniam retam užpildui." msgid "Zig Zag" msgstr "Zigzagas" msgid "Cross Zag" msgstr "Sukryžiuotas zigzagas" msgid "Locked Zag" msgstr "Surakintas zigzagas" msgid "Line" msgstr "Linija" msgid "Grid" msgstr "Tinklelis" msgid "Tri-hexagon" msgstr "Trijų šešiakampių sistema" msgid "Cubic" msgstr "Kubinis" msgid "Adaptive Cubic" msgstr "Prisitaikantis kubinis" msgid "Quarter Cubic" msgstr "Ketvirtis kubo" msgid "Support Cubic" msgstr "Atraminis kubinis (Support Cubic)" msgid "Lightning" msgstr "Žaibas (Lightning)" msgid "Honeycomb" msgstr "Korys" msgid "3D Honeycomb" msgstr "3D korys" msgid "Lateral Honeycomb" msgstr "Šoninis korys" msgid "Lateral Lattice" msgstr "2D grotelės" msgid "Cross Hatch" msgstr "Kryžminis skliautas" msgid "TPMS-D" msgstr "TPMS-D" msgid "TPMS-FK" msgstr "TPMS-FK" msgid "Gyroid" msgstr "Giroidas" msgid "This is the acceleration of top surface infill. Using a lower value may improve top surface quality." msgstr "Viršutinio paviršiaus užpildo pagreitis. Naudojant mažesnę vertę gali pagerėti viršutinio paviršiaus kokybė." msgid "Acceleration of outer wall: using a lower value can improve quality." msgstr "Išorinės sienelės pagreitis. Naudojant mažesnę vertę galima pagerinti kokybę." msgid "Acceleration of inner walls." msgstr "Vidinių sienelių pagreitis." msgid "Acceleration of sparse infill. If the value is expressed as a percentage (e.g. 100%), it will be calculated based on the default acceleration." msgstr "Reto užpildo pagreitis. Jei vertė išreikšta procentais (pvz., 100%), ji bus apskaičiuojama pagal numatytąjį pagreitį." msgid "Acceleration of internal solid infill. If the value is expressed as a percentage (e.g. 100%), it will be calculated based on the default acceleration." msgstr "Vidinio vientiso užpildo pagreitis. Jei vertė išreikšta procentais (pvz., 100%), ji bus apskaičiuojama pagal numatytąjį pagreitį." msgid "This is the printing acceleration for the first layer. Using limited acceleration can improve build plate adhesion." msgstr "Tai pirmojo sluoksnio spausdinimo pagreitis. Naudojant ribotą pagreitį galima pagerinti sukibimą su pagrindu." msgid "Enable accel_to_decel" msgstr "Įjungti greitėjimą iki lėtėjimo (accel_to_decel)" msgid "Klipper's max_accel_to_decel will be adjusted automatically." msgstr "„Klipper“ programinės įrangos max_accel_to_decel bus pritaikytas automatiškai." msgid "accel_to_decel" msgstr "accel_to_decel" #, c-format, boost-format msgid "Klipper's max_accel_to_decel will be adjusted to this %% of acceleration." msgstr "„Klipper“ programinės įrangos max_accel_to_decel bus pakoreguotas iki šios pagreičio procentinės dalies (%%)." msgid "Default jerk." msgstr "Numatytasis trūkčiojimas." msgid "Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)." msgstr "„Marlin“ programinės įrangos jungties nuokrypis (pakeičia tradicinį XY trūkčiojimo (Jerk) nustatymą)." msgid "Jerk of outer walls." msgstr "Išorinių sienelių trūkčiojimas (Jerk)." msgid "Jerk of inner walls." msgstr "Vidinių sienelių trūkčiojimas (Jerk)." msgid "Jerk for top surface." msgstr "Viršutinio paviršiaus trūkčiojimas (Jerk)." msgid "Jerk for infill." msgstr "Užpildo trūkčiojimas (Jerk)." msgid "Jerk for the first layer." msgstr "Pirmojo sluoksnio trūkčiojimas (Jerk)." msgid "Jerk for travel." msgstr "Tuščiosios eigos (travel) trūkčiojimas (Jerk)." msgid "" "Travel jerk of first layer.\n" "The percentage value is relative to Travel Jerk." msgstr "" "Pirmojo sluoksnio tuščiosios eigos (travel) trūkčiojimas.\n" "Procentinė vertė yra santykinė su tuščiosios eigos trūkčiojimu (Travel Jerk)." msgid "Line width of the first layer. If expressed as a %, it will be computed over the nozzle diameter." msgstr "Pirmojo sluoksnio linijos plotis. Jei išreikštas procentais (%), jis apskaičiuojamas pagal purkštuko skersmenį." msgid "First layer height" msgstr "Pirmojo sluoksnio aukštis" msgid "Height of the first layer. Making the first layer height thicker can improve build plate adhesion." msgstr "Pirmojo sluoksnio aukštis. Padarius pirmąjį sluoksnį storesnį, galima pagerinti sukibimą su pagrindu." msgid "This is the speed for the first layer except for solid infill sections." msgstr "Pirmojo sluoksnio greitis, išskyrus vientiso užpildo dalį." msgid "First layer infill" msgstr "Pirmojo sluoksnio užpildas" msgid "This is the speed for solid infill parts of the first layer." msgstr "Pirmojo sluoksnio vientiso užpildo dalies greitis." msgid "First layer travel speed" msgstr "Pirmojo sluoksnio tuščiosios eigos (travel) greitis" msgid "Travel speed of the first layer." msgstr "Pirmojo sluoksnio tuščiosios eigos (travel) greitis." msgid "Number of slow layers" msgstr "Lėtųjų sluoksnių skaičius" msgid "The first few layers are printed slower than normal. The speed is gradually increased in a linear fashion over the specified number of layers." msgstr "Keli pirmieji sluoksniai spausdinami lėčiau nei įprastai. Greitis palaipsniui linijiniu būdu didinamas per nurodytą sluoksnių skaičių." msgid "First layer nozzle temperature" msgstr "Pirmojo sluoksnio purkštuko temperatūra" msgid "Nozzle temperature for printing the first layer with this filament" msgstr "Purkštuko temperatūra pradiniam sluoksniui spausdinti, kai naudojama ši gija." msgid "Full fan speed at layer" msgstr "Visas ventiliatoriaus greitis sluoksnyje" msgid "Fan speed will be ramped up linearly from zero at layer \"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower than \"close_fan_the_first_x_layers\", in which case the fan will be running at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "Ventiliatoriaus greitis bus didinamas tiesiškai nuo nulio sluoksnyje \"close_fan_the_first_x_layers\" iki maksimalaus sluoksnyje \"full_fan_speed_layer\". Į \"full_fan_speed_layer\" bus neatsižvelgiama, jei jis bus mažesnis už \"close_fan_the_first_x_layers\"; tokiu atveju ventiliatorius veiks didžiausiu leistinu greičiu sluoksnyje \"close_fan_the_first_x_layers\" + 1." msgid "layer" msgstr "sluoksnis" msgid "First layer fan speed" msgstr "Pirmojo sluoksnio ventiliatoriaus greitis" msgid "" "Sets an exact fan speed for the first layer, overriding all other cooling settings. Useful for protecting 3D-printed toolhead parts (e.g. Voron-style ABS/ASA ducts) from a hot bed. A small amount of airflow cools the ducts down, without using full cooling that may in certain conditions hurt first-layer adhesion.\n" "From the second layer onwards, normal cooling resumes.\n" "If \"Full fan speed at layer\" is also set, the fan ramps smoothly from this value on the first layer up to your target by the chosen layer.\n" "Only available when \"No cooling for the first\" is 0.\n" "Set to -1 to disable it." msgstr "" "Nustato tikslų ventiliatoriaus greitį pirmam sluoksniui, nepaisant visų kitų aušinimo nustatymų. Naudinga apsaugoti 3D spausdintuvo galvutės dalis (pvz., „Voron“ tipo ABS/ASA ortakius) nuo karšto kaitinimo stalo. Nedidelis oro srautas atvėsina ortakius nenaudojant pilno aušinimo, kuris tam tikromis sąlygomis gali pakenkti pirmojo sluoksnio sukibimui.\n" "\n" "Nuo antrojo sluoksnio pradedamas normalus aušinimas.\n" "\n" "Jei taip pat nustatyta parinktis „Visas ventiliatoriaus greitis nuo sluoksnio“ (angl. \"Full fan speed at layer\"), ventiliatoriaus greitis sklandžiai didinamas nuo šios reikšmės pirmajame sluoksnyje iki tikslinio greičio nurodytame sluoksnyje.\n" "\n" "Pasiekiama tik tada, kai parinktis „Jokio aušinimo pirmiesiems“ (angl. \"No cooling for the first\") lygi 0.\n" "\n" "Nustatykite -1, jei norite išjungti." msgid "Support interface fan speed" msgstr "Atramų skiriamųjų sluoksnių ventiliatoriaus greitis" msgid "" "This part cooling fan speed is applied when printing support interfaces. Setting this parameter to a higher than regular speed reduces the layer binding strength between supports and the supported part, making them easier to separate.\n" "Set to -1 to disable it.\n" "This setting is overridden by disable_fan_first_layers." msgstr "" "Šis detalės aušinimo ventiliatoriaus greitis yra taikomas spausdinant atramų skiriamuosius sluoksnius. Nustačius didesnį nei įprasta šio parametro greitį, sumažėja sluoksnių sukibimo stiprumas tarp atramų ir remiamos detalės, todėl jas lengviau atskirti.\n" "Nustatykite -1, kad išjungtumėte.\n" "Šį nustatymą perrašo disable_fan_first_layers." msgid "Internal bridges fan speed" msgstr "Vidinių tiltelių ventiliatoriaus greitis" msgid "" "The part cooling fan speed used for all internal bridges. Set to -1 to use the overhang fan speed settings instead.\n" "\n" "Reducing the internal bridges fan speed, compared to your regular fan speed, can help reduce part warping due to excessive cooling applied over a large surface for a prolonged period of time." msgstr "" "Detalės aušinimo ventiliatoriaus greitis, naudojamas visiems vidiniams tilteliams. Nustatykite vertę -1, kad vietoj to būtų naudojami iškyšų ventiliatoriaus greičio nustatymai.\n" "\n" "Sumažintas vidinių tiltelių ventiliatoriaus greitis, lyginant su įprastu greičiu, padeda sumažinti detalės deformavimąsi (warping) dėl per didelio aušinimo, kuris ilgą laiką taikomas dideliam paviršiui." msgid "Ironing fan speed" msgstr "Lyginimo ventiliatoriaus greitis" msgid "" "This part cooling fan speed is applied when ironing. Setting this parameter to a lower than regular speed reduces possible nozzle clogging due to the low volumetric flow rate, making the interface smoother.\n" "Set to -1 to disable it." msgstr "" "Šis detalės aušinimo ventiliatoriaus greitis yra taikomas lyginant paviršių. Nustačius mažesnį nei įprasta šio parametro greitį, sumažėja purkštuko užsikimšimo rizika dėl mažo tūrinio srauto, todėl paviršius tampa lygesnis.\n" "Nustatykite -1, kad išjungtumėte." msgid "Ironing flow" msgstr "Lyginimo srautas" msgid "Filament-specific override for ironing flow. This allows you to customize the ironing flow for each filament type. Too high value results in overextrusion on the surface." msgstr "Konkrečiai gijai taikomas lyginimo srauto nepaisymas. Tai leidžia pritaikyti lyginimo srauto nustatymus kiekvienam gijos tipui. Per didelė vertė sukelia perteklinį medžiagos išspaudimą (overextrusion) ant paviršiaus." msgid "Ironing line spacing" msgstr "Lyginimo linijų tankumas (žingsnis)" msgid "Filament-specific override for ironing line spacing. This allows you to customize the spacing between ironing lines for each filament type." msgstr "Konkrečiai gijai taikomas lyginimo linijų tankumo nepaisymas. Tai leidžia pritaikyti atstumus tarp lyginimo linijų kiekvienam gijos tipui." msgid "Ironing inset" msgstr "Lyginimo atitraukimas (inset)" msgid "Filament-specific override for ironing inset. This allows you to customize the distance to keep from the edges when ironing for each filament type." msgstr "Konkrečiai gijai taikomas lyginimo atitraukimo nepaisymas. Tai leidžia pritaikyti išlaikomą atstumą nuo kraštų lyginimo metu kiekvienam gijos tipui." msgid "Ironing speed" msgstr "Lyginimo greitis" msgid "Filament-specific override for ironing speed. This allows you to customize the print speed of ironing lines for each filament type." msgstr "Konkrečiai gijai taikomas lyginimo greičio nepaisymas. Tai leidžia pritaikyti lyginimo linijų spausdinimo greitį kiekvienam gijos tipui." msgid "This setting makes the toolhead randomly jitter while printing walls so that the surface has a rough textured look. This setting controls the fuzzy position." msgstr "Šis nustatymas verčia spausdintuvo galvutę atsitiktinai vibruoti (angl. \"jitter\") spausdinant sieneles, kad paviršius įgautų šiurkščią, tekstūruotą išvaizdą. Šis parametras valdo „fuzzy“ (išplautos/šiurkščios) pozicijos intensyvumą." msgid "Painted only" msgstr "Tik dažytas" msgid "Contour" msgstr "Kontūras" msgid "Hole" msgstr "Skylė" msgid "Contour and hole" msgstr "Kontūras ir skylė" msgid "All walls" msgstr "Visos sienelės" msgid "Fuzzy skin thickness" msgstr "Grublėto paviršiaus storis" msgid "The width of jittering: it’s recommended to keep this lower than the outer wall line width." msgstr "Vibravimo plotis: rekomenduojama šią reikšmę laikyti mažesnę už išorinės sienelės linijos plotį." msgid "Fuzzy skin point distance" msgstr "Grublėto paviršiaus taško atstumas" msgid "The average distance between the random points introduced on each line segment." msgstr "Vidutinis atstumas tarp atsitiktinių taškų, įvestų kiekvienoje linijos atkarpoje." msgid "Apply fuzzy skin to first layer" msgstr "Taikyti grublėtą paviršių (fuzzy skin) pirmajam sluoksniui" msgid "Whether to apply fuzzy skin on the first layer." msgstr "Ar taikyti grublėtą paviršių (fuzzy skin) ant pirmojo sluoksnio." msgid "Fuzzy skin generator mode" msgstr "Grublėto paviršiaus (fuzzy skin) generatoriaus režimas" #, c-format, boost-format msgid "" "Fuzzy skin generation mode. Works only with Arachne!\n" "Displacement: Сlassic mode when the pattern is formed by shifting the nozzle sideways from the original path.\n" "Extrusion: The mode when the pattern formed by the amount of extruded plastic. This is the fast and straight algorithm without unnecessary nozzle shake that gives a smooth pattern. But it is more useful for forming loose walls in the entire they array.\n" "Combined: Joint mode [Displacement] + [Extrusion]. The appearance of the walls is similar to [Displacement] Mode, but it leaves no pores between the perimeters.\n" "\n" "Attention! The [Extrusion] and [Combined] modes works only the fuzzy_skin_thickness parameter not more than the thickness of printed loop. At the same time, the width of the extrusion for a particular layer should also not be below a certain level. It is usually equal 15-25%% of a layer height. Therefore, the maximum fuzzy skin thickness with a perimeter width of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! If you enter a higher parameter than this, the error Flow::spacing() will displayed, and the model will not be sliced. You can choose this number until this error is repeated." msgstr "" "Grublėto paviršiaus (fuzzy skin) generavimo režimas. Veikia tik naudojant „Arachne“ sienelių generatorių!\n" "Poslinkis (Displacement): Klasikinis režimas, kai raštas formuojamas stumiant purkštuką į šoną nuo pradinės trajektorijos.\n" "Išspaudimas (Extrusion): Režimas, kai raštas suformuojamas keičiant išspaudžiamo plastiko kiekį. Tai greitas ir tiesus algoritmas be nereikalingo purkštuko purtymo, sukuriantis švelnesnį raštą. Tačiau jis labiau naudingas formuojant laisvas sieneles visame jų masyve.\n" "Kombinuotas (Combined): Jungtinis režimas [Poslinkis] + [Išspaudimas]. Sienelių išvaizda panaši į [Poslinkio] režimą, tačiau tarp perimetrų nelieka tuštumų.\n" "\n" "Dėmesio! [Išspaudimo] ir [Kombinuotas] režimai veikia tik tada, kai fuzzy_skin_thickness parametras neviršija spausdinamos kilpos storio. Tuo pat metu ekstruzijos plotis konkrečiame sluoksnyje taip pat neturi būti mažesnis už tam tikrą lygį. Paprastai jis lygus 15–25%% sluoksnio aukščio. Todėl maksimalus grublėto paviršiaus storis, kai perimetro plotis yra 0,4 mm, o sluoksnio aukštis – 0,2 mm, bus 0,4-(0,2*0,25)=±0,35 mm! Jei įvesite didesnę vertę, bus parodyta klaida Flow::spacing() ir modelis nebus suslupksniuotas (sliced). Galite keisti šį skaičių, kol ši klaida nustos kartotis." msgid "Displacement" msgstr "Poslinkis (Displacement)" msgid "Extrusion" msgstr "Išspaudimas (Extrusion)" msgid "Combined" msgstr "Kombinuotas" msgid "Fuzzy skin noise type" msgstr "Grublėto paviršiaus (fuzzy skin) triukšmo tipas" msgid "" "Noise type to use for fuzzy skin generation:\n" "Classic: Classic uniform random noise.\n" "Perlin: Perlin noise, which gives a more consistent texture.\n" "Billow: Similar to perlin noise, but clumpier.\n" "Ridged Multifractal: Ridged noise with sharp, jagged features. Creates marble-like textures.\n" "Voronoi: Divides the surface into voronoi cells, and displaces each one by a random amount. Creates a patchwork texture.\n" "Ripple: Uniform ripple pattern that ripples left and right of the original path. Repeating pattern, woven appearance." msgstr "" "Triukšmo tipas, naudojamas grublėto paviršiaus generavimui:\n" "Klasikinis (Classic): Klasikinis tolygus atsitiktinis triukšmas.\n" "Perlin: Perlino triukšmas, sukuriantis nuoseklesnę tekstūrą.\n" "Billow: Panašus į Perlino triukšmą, bet labiau gubruotas (gabalinis).\n" "Keterinis multifraktalas (Ridged Multifractal): Keterinis triukšmas su aštriais, dantytais bruožais. Sukuria į marmurą panašias tekstūras.\n" "Voronoi: Padalija paviršių į Voronojaus ląsteles ir pastumia kiekvieną iš jų atsitiktiniu dydžiu. Sukuria lopinėlių tekstūrą.\n" "Vilnelės (Ripple): Tolygus vilnelių raštas, kuris banguoja į kairę ir į dešinę nuo pradinės trajektorijos. Pasikartojantis raštas, sukuriantis austo audinio išvaizdą." msgid "Classic" msgstr "Klasikinis" msgid "Perlin" msgstr "Perlino (Perlin)" msgid "Billow" msgstr "Gubruotas (Billow)" msgid "Ridged Multifractal" msgstr "Keterinis multifraktalas (Ridged Multifractal)" msgid "Voronoi" msgstr "Voronojaus (Voronoi)" msgid "Ripple" msgstr "Vilnelės (Ripple)" msgid "Fuzzy skin feature size" msgstr "Grublėto paviršiaus (fuzzy skin) elementų dydis" msgid "The base size of the coherent noise features, in mm. Higher values will result in larger features." msgstr "Koherentinio triukšmo elementų bazinis dydis milimetrais. Didesnės vertės sukuria didesnius elementus." msgid "Fuzzy Skin Noise Octaves" msgstr "Grublėto paviršiaus (fuzzy skin) triukšmo oktavos" msgid "The number of octaves of coherent noise to use. Higher values increase the detail of the noise, but also increase computation time." msgstr "Koherentinio triukšmo oktavų skaičius, kuris bus naudojamas. Didesnės reikšmės padidina triukšmo detalumą, tačiau taip pat pailgina skaičiavimo laiką." msgid "Fuzzy skin noise persistence" msgstr "Grublėto paviršiaus (fuzzy skin) triukšmo išlaikymas (persistence)" msgid "The decay rate for higher octaves of the coherent noise. Lower values will result in smoother noise." msgstr "Aukštesnių koherentinio triukšmo oktavų silpnėjimo greitis. Mažesnės vertės sukuria tolygesnį triukšmą." msgid "Number of ripples per layer" msgstr "Vilnelių skaičius sluoksnyje" msgid "Controls how many full cycles of ripples will be added per layer." msgstr "Valdo, kiek pilnų vilnelių ciklų bus pridėta viename sluoksnyje." msgid "Ripple offset" msgstr "Vilnelių poslinkis (offset)" msgid "" "Shifts the ripple phase forward along the print path by the specified percentage of a wavelength each layer period.\n" "- 0% keeps every layer identical.\n" "- 50% shifts the pattern by half a wavelength, effectively inverting the phase.\n" "- 100% shifts the pattern by a full wavelength, returning to the original phase.\n" "\n" "The shift is applied once every number of layers set by Layers between ripple offset, so layers within the same group are printed identically." msgstr "" "Pastumia vilnelės fazę į priekį išilgai spausdinimo trajektorijos nurodytu bangos ilgio procentu kiekviename sluoksnių periode.\n" "– 0% išlaiko kiekvieną sluoksnį identišką.\n" "– 50% pastumia raštą puse bangos ilgio, efektyviai invertuodamas fazę.\n" "– 100% pastumia raštą visu bangos ilgiu, sugrąžindamas pradinę fazę.\n" "\n" "Poslinkis taikomas kas tiek sluoksnių, kiek nurodyta parametre „Sluoksnių skaičius tarp vilnelių poslinkio“, todėl tos pačios grupės sluoksniai spausdinami identiškai." msgid "Layers between ripple offset" msgstr "Sluoksnių skaičius tarp vilnelių poslinkio" msgid "" "Specifies how many consecutive layers share the same ripple phase before the offset is applied.\n" "For example:\n" "- 1 = Layer 1 is printed with the base ripple pattern, then layer 2 is shifted by the configured offset, then layer 3 returns to the base pattern, and so on.\n" "- 3 = Layers 1 to 3 are printed with the base ripple pattern, then layers 4 to 6 are shifted by the configured offset, then layers 7 to 9 return to the base pattern, etc." msgstr "" "Nurodo, kiek iš eilės einančių sluoksnių naudoja tą pačią vilnelių fazę prieš pritaikant poslinkį.\n" "Pavyzdžiui:\n" "– 1 = 1 sluoksnis spausdinamas su baziniu vilnelių raštu, tada 2 sluoksnis pastumiamas sukonfigūruotu poslinkiu, 3 sluoksnis grįžta prie bazinio rašto ir t. t.\n" "– 3 = sluoksniai nuo 1 iki 3 spausdinami su baziniu vilnelių raštu, tada sluoksniai nuo 4 iki 6 pastumiami sukonfigūruotu poslinkiu, sluoksniai nuo 7 iki 9 grįžta prie bazinio rašto ir t. t." msgid "Filter out tiny gaps" msgstr "Filtruoti mažus tarpus" msgid "Layers and Perimeters" msgstr "Sluoksniai ir perimetrai" msgid "Don't print gap fill with a length is smaller than the threshold specified (in mm). This setting applies to top, bottom and solid infill and, if using the classic perimeter generator, to wall gap fill." msgstr "Nespausdinti tarpų užpildymo, kurio ilgis mažesnis už nurodytą ribą milimetrais. Šis nustatymas taikomas viršutiniam, apatiniam ir vientisam užpildui, o naudojant klasikinį perimetro generatorių – ir sienelių tarpų užpildymui." msgid "This is the speed for gap infill. Gaps usually have irregular line width and should be printed more slowly." msgstr "Tarpų užpildo greitis. Tarpai paprastai būna netaisyklingo linijos pločio, todėl juos reikėtų spausdinti lėčiau." msgid "Precise Z height" msgstr "Tikslus Z aukštis" msgid "Enable this to get precise Z height of object after slicing. It will get the precise object height by fine-tuning the layer heights of the last few layers. Note that this is an experimental parameter." msgstr "Įjunkite, kad gautumėte tikslų objekto Z-ašies aukštį po supjaustymo (slicing). Tikslus objekto aukštis pasiekiamas tiksliai sureguliuojant kelių paskutinių sluoksnių aukštį. Atkreipkite dėmesį, kad tai yra eksperimentinis parametras." msgid "Arc fitting" msgstr "Lankų pritaikymas (Arc fitting)" msgid "" "Enable this to get a G-code file which has G2 and G3 moves. The fitting tolerance is same as the resolution.\n" "\n" "Note: For Klipper machines, this option is recommended to be disabled. Klipper does not benefit from arc commands as these are split again into line segments by the firmware. This results in a reduction in surface quality as line segments are converted to arcs by the slicer and then back to line segments by the firmware." msgstr "" "Įjunkite, kad gautumėte G-kodo failą su G2 ir G3 judesiais. Pritaikymo tolerancija yra tokia pati kaip skiriamoji geba (resolution).\n" "\n" "Pastaba: „Klipper“ valdomiems spausdintuvams šią parinktį rekomenduojama išjungti. „Klipper“ programinė įranga neduoda jokios naudos iš lankų komandų, nes ji jas vėl suskaido į tiesių segmentus. Dėl to gali suprastėti paviršiaus kokybė, kadangi tiesių segmentai pjaustytuve paverčiami lankais, o programinėje įrangoje – vėl atgal į tiesių segmentus." msgid "Add line number" msgstr "Pridėti eilutės numerį" msgid "Enable this to add line number(Nx) at the beginning of each G-code line." msgstr "Įjunkite, kad pridėtumėte eilutės numerį (Nx) kiekvienos G-kodo eilutės pradžioje." msgid "Scan first layer" msgstr "Nuskaityti pirmąjį sluoksnį" msgid "Enable this to allow the camera on the printer to check the quality of the first layer." msgstr "Įjunkite, kad spausdintuvo kamera patikrintų pirmojo sluoksnio kokybę." msgid "Power Loss Recovery" msgstr "Spausdinimo atnaujinimas dingus maitinimui (Power Loss Recovery)" msgid "Choose how to control power loss recovery. When set to Printer configuration, the slicer will not emit power loss recovery G-code and will leave the printer's configuration unchanged. Applicable to Bambu Lab or Marlin 2 firmware based printers." msgstr "Pasirinkite, kaip valdyti spausdinimo atnaujinimą dingus maitinimui. Pasirinkus „Spausdintuvo konfigūracija“, pjaustytuvas neįterps papildomo atstatymo G-kodo ir paliks nepakeistą paties spausdintuvo konfigūraciją. Taikoma „Bambu Lab“ arba „Marlin 2“ programine įranga pagrįstiems spausdintuvams." msgid "Printer configuration" msgstr "Spausdintuvo konfigūracija" msgid "Nozzle type" msgstr "Purkštuko tipas" msgid "The metallic material of the nozzle: This determines the abrasive resistance of the nozzle and what kind of filament can be printed." msgstr "Purkštuko metalo lydinys. Tai lemia purkštuko atsparumą abrazyvui ir nurodo, kokias gijas galima spausdinti." msgid "Hardened steel" msgstr "Kietintas plienas" msgid "Stainless steel" msgstr "Nerūdijantis plienas" msgid "Tungsten carbide" msgstr "Volframo karbidas" msgid "Nozzle HRC" msgstr "Purkštuko HRC" msgid "The nozzle's hardness. Zero means no checking for nozzle hardness during slicing." msgstr "Purkštuko kietumas. Nulis reiškia, kad pjaustymo metu purkštuko kietumas nebus tikrinamas." msgid "HRC" msgstr "HRC" msgid "Printer structure" msgstr "Spausdintuvo konstrukcija" msgid "The physical arrangement and components of a printing device." msgstr "Spausdinimo įrenginio fizinis išdėstymas ir sudedamosios dalys." msgid "CoreXY" msgstr "CoreXY" msgid "I3" msgstr "I3" msgid "Hbot" msgstr "Hbot" msgid "Delta" msgstr "Delta" msgid "Best object position" msgstr "Geriausia objekto padėtis" msgid "Best auto arranging position in range [0,1] w.r.t. bed shape." msgstr "Geriausia automatinio išdėstymo padėtis intervale [0,1] pagal pagrindo formą." msgid "Enable this option if machine has auxiliary part cooling fan. G-code command: M106 P2 S(0-255)." msgstr "Įjunkite šią parinktį, jei įrenginyje yra papildomas detalės aušinimo ventiliatorius (auxiliary fan). G-kodo komanda: M106 P2 S(0-255)." # AI Translated msgid "Fan direction" msgstr "Ventiliatoriaus kryptis" # AI Translated msgid "Cooling fan direction of the printer" msgstr "Spausdintuvo aušinimo ventiliatoriaus kryptis" # AI Translated msgid "Both" msgstr "Abi" msgid "" "Start the fan this number of seconds earlier than its target start time (you can use fractional seconds). It assumes infinite acceleration for this time estimation, and will only take into account G1 and G0 moves (arc fitting is unsupported).\n" "It won't move fan commands from custom G-code (they act as a sort of 'barrier').\n" "It won't move fan commands into the start G-code if the 'only custom start G-code' is activated.\n" "Use 0 to deactivate." msgstr "" "Paleisti ventiliatorių nurodytu sekundžių skaičiumi anksčiau (galima naudoti trupmenines dalis). Šiam laiko skaičiavimui daroma prielaida, kad pagreitis yra begalinis, ir atsižvelgiama tik į G1 bei G0 judesius (lankų pritaikymas nepalaikomas).\n" "Šis nustatymas neperkels ventiliatoriaus komandų iš pasirinktinio G-kodo (jie veikia kaip tam tikras barjeras).\n" "Komandos nebus perkeltos į pradinį G-kodą, jei suaktyvinta parinktis „tik pasirinktinis pradžios G-kodas“.\n" "Įrašykite 0, kad išjungtumėte." msgid "Only overhangs" msgstr "Tik iškyšos" msgid "Will only take into account the delay for the cooling of overhangs." msgstr "Bus atsižvelgiama tik į iškyšų aušinimo vėlavimą." msgid "Fan kick-start time" msgstr "Ventiliatoriaus „kick-start“ (priverstinio paleidimo) laikas" msgid "" "Emit a max fan speed command for this amount of seconds before reducing to target speed to kick-start the cooling fan.\n" "This is useful for fans where a low PWM/power may be insufficient to get the fan started spinning from a stop, or to get the fan up to speed faster.\n" "Set to 0 to deactivate." msgstr "" "Nurodytą sekundžių skaičių siunčiama maksimalaus ventiliatoriaus greičio komanda prieš jį sumažinant iki tikslinio greičio, kad aušinimo ventiliatorius būtų priverstinai paleistas (kick-start).\n" "Tai naudinga ventiliatoriams, kuriems esant mažam PWM signalui / galiai gali nepakakti jėgos pradėti suktis iš sustojimo būsenos arba norint greičiau pasiekti reikiamą greitį.\n" "Nustatykite 0, kad išjungtumėte." msgid "Minimum non-zero part cooling fan speed" msgstr "Minimalus ne nulinis detalės aušinimo ventiliatoriaus greitis" msgid "" "Some part-cooling fans cannot start spinning when commanded below a certain PWM duty cycle. When set above 0, any non-zero part-cooling fan command will be raised to at least this percentage so the fan reliably starts. A fan command of 0 (fan off) is always honoured exactly. This clamp is applied after every other fan calculation (first-layer ramp, layer-time interpolation, overhang/bridge/support-interface/ironing overrides), so scaling still operates within the range [this value, 100%].\n" "If your firmware already disables the fan below a threshold (for example Klipper's [fan] off_below: 0.10 shuts the fan off whenever the commanded duty cycle is below 10%), this option and the firmware threshold should ideally be set to the same value. Matching them (e.g. off_below: 0.10 in Klipper and 10% here) guarantees the slicer never emits a non-zero value that the firmware would silently drop, and the fan never receives a value below the one you know it can actually spool at.\n" "Set to 0 to deactivate." msgstr "" "Kai kurie detalių aušinimo ventiliatoriai negali pradėti suktis, kai komanda yra mažesnė už tam tikrą PWM užpildymo koeficientą. Nustačius didesnę nei 0 vertę, bet kokia ne nulinė ventiliatoriaus komanda bus padidinta bent iki šio procento, kad ventiliatorius patikimai įsijungtų. Ventiliatoriaus komanda 0 (ventiliatorius išjungtas) visada vykdoma tiksliai. Šis ribojimas taikomas po visų kitų ventiliatoriaus skaičiavimų (pirmojo sluoksnio greitėjimo, sluoksnio laiko interpoliacijos, iškyšų / tiltelių / atramų skiriamųjų sluoksnių / lyginimo nepaisymų), todėl mastelio keitimas vis tiek veikia rėžiuose nuo [šios vertės] iki 100%%.\n" "Jei jūsų programinė įranga jau išjungia ventiliatorių žemiau tam tikros ribos (pavyzdžiui, „Klipper“ nustatymas [fan] off_below: 0.10 išjungia ventiliatorių, kai nurodytas užpildymo koeficientas yra mažesnis nei 10%), ši parinktis ir programinės įrangos riba idealiai turėtų būti nustatytos į tą pačią vertę. Jas suderinus (pvz., off_below: 0.10 „Klipper“ programoje ir 10% čia), užtikrinama, kad pjaustytuvas niekada neišsiųs ne nulinės vertės, kurią programinė įranga tyliai atmestų, o ventiliatorius niekada negaus vertės, mažesnės už tą, kuria jis realiai sugeba pradėti suktis.\n" "Nustatykite 0, kad išjungtumėte." msgid "Time cost" msgstr "Laiko kaina" msgid "The printer cost per hour." msgstr "Spausdintuvo valandos kaina." msgid "money/h" msgstr "pinigai/h" msgid "Support controlling chamber temperature" msgstr "Atramų valdymo temperatūra kameros viduje (angl. \"Support controlling chamber temperature\")." msgid "" "This option is enabled if machine support controlling chamber temperature\n" "G-code command: M141 S(0-255)" msgstr "" "Ši parinktis įjungiama, jei įrenginys palaiko kameros temperatūros valdymą.\n" "G-kodo komanda: M141 S(0-255)" msgid "Support air filtration" msgstr "Oro filtravimo palaikymas" msgid "" "Enable this if printer support air filtration\n" "G-code command: M106 P3 S(0-255)" msgstr "" "Įjunkite, jei spausdintuvas palaiko oro filtravimą.\n" "G-kodo komanda: M106 P3 S(0-255)" # AI Translated msgid "Use cooling filter" msgstr "Naudoti aušinimo filtrą" # AI Translated msgid "Enable this if printer support cooling filter" msgstr "Įjunkite, jei spausdintuvas palaiko aušinimo filtrą" msgid "G-code flavor" msgstr "G-kodo tipas" msgid "What kind of G-code the printer is compatible with." msgstr "Su kokiu G kodu suderinamas spausdintuvas." msgid "Klipper" msgstr "Klipper" msgid "Pellet Modded Printer" msgstr "Modifikuotas granulinis spausdintuvas" msgid "Enable this option if your printer uses pellets instead of filaments." msgstr "Įjunkite šią parinktį, jei spausdintuve vietoj gijų naudojamos granulės." msgid "Support multi bed types" msgstr "Kelių pagrindo tipų palaikymas" msgid "Enable this option if you want to use multiple bed types." msgstr "Įjunkite šią parinktį, jei norite naudoti kelių tipų pagrindus." msgid "Label objects" msgstr "Objektų žymėjimas" msgid "Enable this to add comments into the G-code labeling print moves with what object they belong to, which is useful for the Octoprint CancelObject plug-in. This setting is NOT compatible with Single Extruder Multi Material setup and Wipe into Object / Wipe into Infill." msgstr "Įjunkite, kad į G-kodą būtų įtraukti komentarai, pažymintys, kuriam objektui priklauso spausdinimo judesiai – tai naudinga „Octoprint CancelObject“ papildiniui. Šis nustatymas NĖRA suderinamas su vieno ekstruderio kelių medžiagų (Multi Material) sąranka bei su parinktimis „Valyti į objektą“ / „Valyti į užpildą“." msgid "Exclude objects" msgstr "Išskirti objektus" msgid "Enable this option to add EXCLUDE OBJECT command in G-code." msgstr "Įjunkite šią parinktį, kad G-kode būtų pridėta komanda EXCLUDE OBJECT." msgid "Verbose G-code" msgstr "Išsamus G-kodas (Verbose)" msgid "Enable this to get a commented G-code file, with each line explained by a descriptive text. If you print from SD card, the additional weight of the file could make your firmware slow down." msgstr "Įjunkite, kad gautumėte failą su pakomentuotu G-kodu, kuriame kiekviena eilutė paaiškinta aprašomuoju tekstu. Jei spausdinate iš SD kortelės, dėl padidėjusio failo dydžio programinė įranga gali veikti lėčiau." msgid "Infill combination" msgstr "Užpildo derinimas (apjungimas)" msgid "Automatically combine sparse infill of several layers to print together in order to reduce time. Walls are still printed with original layer height." msgstr "Automatiškai apjungia kelių sluoksnių retą užpildą bendram spausdinimui, kad sutrumpėtų laikas. Sienelė vis tiek spausdinama išlaikant pradinį sluoksnio aukštį." msgid "Infill shift step" msgstr "Užpildo poslinkio žingsnis" msgid "This parameter adds a slight displacement to each layer of infill to create a cross texture." msgstr "Šis parametras prideda nedidelį poslinkį kiekvienam užpildo sluoksniui, kad sukurtų kryžminę tekstūrą." msgid "Sparse infill rotation template" msgstr "Reto užpildo pasukimo šablonas" msgid "Rotate the sparse infill direction per layer using a template of angles. Enter comma-separated degrees (e.g., '0,30,60,90'). Angles are applied in order by layer and repeat when the list ends. Advanced syntax is supported: '+5' rotates +5° every layer; '+5#5' rotates +5° every 5 layers. See the Wiki for details. When a template is set, the standard infill direction setting is ignored. Note: some infill patterns (e.g., Gyroid) control rotation themselves; use with care." msgstr "Keičia reto užpildo kryptį kiekviename sluoksnyje pagal kampų šabloną. Įveskite kableliais atskirtas laipsnių vertes (pvz., „0,30,60,90“). Kampai taikomi iš eilės pagal sluoksnius, o sąrašui pasibaigus – kartojami. Palaikoma išplėstinė sintaksė: „+5“ pasuka +5° kas sluoksnį; „+5#5“ pasuka +5° kas 5 sluoksnius. Išsamesnės informacijos ieškokite „Wiki“ puslapyje. Nustačius šabloną, standartinis užpildo krypties nustatymas ignoruojamas. Pastaba: kai kurie užpildo raštai (pvz., „Gyroid“) pasukimą valdo patys, todėl naudokite atsargiai." msgid "Solid infill rotation template" msgstr "Vientiso užpildo pasukimo šablonas" msgid "This parameter adds a rotation of solid infill direction to each layer according to the specified template. The template is a comma-separated list of angles in degrees, e.g. '0,90'. The first angle is applied to the first layer, the second angle to the second layer, and so on. If there are more layers than angles, the angles will be repeated. Note that not all solid infill patterns support rotation." msgstr "Šis parametras kiekvienam sluoksniui prideda vientiso užpildo krypties pasukimą pagal nurodytą šabloną. Šablonas yra kableliais atskirtas kampų sąrašas laipsniais (pvz., „0,90“). Pirmasis kampas taikomas pirmajam sluoksniui, antrasis – antrajam sluoksniui ir t. t. Jei sluoksnių yra daugiau nei nurodytų kampų, jie bus kartojami iš naujo. Atkreipkite dėmesį, kad ne visi vientiso užpildo raštai palaiko pasukimą." msgid "Skeleton infill density" msgstr "Karkaso užpildo tankis" msgid "The remaining part of the model contour after removing a certain depth from the surface is called the skeleton. This parameter is used to adjust the density of this section. When two regions have the same sparse infill settings but different skeleton densities, their skeleton areas will develop overlapping sections. Default is as same as infill density." msgstr "Modelio kontūro dalis, likusi atėmus tam tikrą gylį nuo paviršiaus, vadinama karkasu (skeleton). Šis parametras naudojamas šios dalies tankiui reguliuoti. Kai dvi sritys naudoja tuos pačius reto užpildo nustatymus, bet skirtingus karkaso tankius, jų karkaso zonos suformuos persidengiančias dalis. Numatytasis nustatymas sutampa su užpildo tankiu." msgid "Skin infill density" msgstr "Paviršinio sluoksnio (skin) užpildo tankis" msgid "The portion of the model's outer surface within a certain depth range is called the skin. This parameter is used to adjust the density of this section. When two regions have the same sparse infill settings but different skin densities, this area will not be split into two separate regions. Default is as same as infill density." msgstr "Modelio išorinio paviršiaus dalis tam tikrame gylio rėžyje yra vadinama paviršiniu sluoksniu (skin). Šis parametras naudojamas šios dalies tankiui reguliuoti. Kai dvi sritys naudoja tuos pačius reto užpildo nustatymus, bet skirtingus paviršinio sluoksnio tankius, ši zona nebus išskirta į du atskirus regionus. Numatytasis nustatymas sutampa su užpildo tankiu." msgid "Skin infill depth" msgstr "Paviršinio sluoksnio (skin) užpildo gylis" msgid "The parameter sets the depth of skin." msgstr "Parametras nustato paviršiaus gylį." msgid "Infill lock depth" msgstr "Užpildo fiksavimo gylis" msgid "The parameter sets the overlapping depth between the interior and skin." msgstr "Šis parametras nustato vidaus ir išorės sluoksnių persidengimo gylį." msgid "Skin line width" msgstr "Paviršiaus linijos plotis" msgid "Adjust the line width of the selected skin paths." msgstr "Nustatykite pasirinktų paviršiaus kontūrų linijų plotį." msgid "Skeleton line width" msgstr "Karkaso linijos plotis" msgid "Adjust the line width of the selected skeleton paths." msgstr "Nustatykite pasirinktų karkaso kontūrų linijų plotį." msgid "Symmetric infill Y axis" msgstr "Simetriškas užpildas pagal Y ašį" msgid "If the model has two parts that are symmetric about the Y axis, and you want these parts to have symmetric textures, please click this option on one of the parts." msgstr "Jei modelis turi dvi dalis, kurios yra simetriškos Y ašies atžvilgiu, ir norite, kad šios dalys turėtų simetriškas tekstūras, spustelėkite šią parinktį vienoje iš dalių." msgid "Infill combination - Max layer height" msgstr "Užpildo derinimas – maksimalus sluoksnio aukštis" msgid "" "Maximum layer height for the combined sparse infill.\n" "\n" "Set it to 0 or 100% to use the nozzle diameter (for maximum reduction in print time) or a value of ~80% to maximize sparse infill strength.\n" "\n" "The number of layers over which infill is combined is derived by dividing this value with the layer height and rounded down to the nearest decimal.\n" "\n" "Use either absolute mm values (eg. 0.32mm for a 0.4mm nozzle) or % values (eg 80%). This value must not be larger than the nozzle diameter." msgstr "" "Maksimalus sluoksnio aukštis derinamam (apjungtam) retam užpildui.\n" "\n" "Nustatykite 0 arba 100%, kad būtų naudojamas purkštuko skersmuo (maksimaliam spausdinimo laiko sutrumpinimui), arba maždaug 80% vertę, kad maksimaliai padidintumėte reto užpildo tvirtumą.\n" "\n" "Sluoksnių skaičius, per kuriuos užpildas yra derinamas, gaunamas dalijant šią vertę iš pagrindinio sluoksnio aukščio ir suapvalinant žemyn iki sveiko skaičiaus.\n" "\n" "Naudokite absoliučias vertes milimetrais arba procentines vertes (pvz., 80%). Ši vertė negali būti didesnė už purkštuko skersmenį." msgid "Enable clumping detection" msgstr "Įjungti sankaupų (clumping) aptikimą" msgid "Clumping detection layers" msgstr "Sankaupų aptikimo sluoksniai" msgid "Clumping detection layers." msgstr "Sankaupų aptikimo sluoksniai." msgid "Probing exclude area of clumping" msgstr "Zonduojamos sankaupų išimties zonos" msgid "Probing exclude area of clumping." msgstr "Zonduojamos sankaupų išimties zonos." msgid "Lateral lattice angle 1" msgstr "Rašto kampas 1" msgid "The angle of the first set of Lateral lattice elements in the Z direction. Zero is vertical." msgstr "Pirmojo 2D grotelių elementų rinkinio kampas Z kryptimi. Nulis yra vertikalus." msgid "Lateral lattice angle 2" msgstr "Rašto kampas 2" msgid "The angle of the second set of Lateral lattice elements in the Z direction. Zero is vertical." msgstr "Antrojo 2D grotelių elementų rinkinio kampas Z kryptimi. Nulis yra vertikalus." msgid "Infill overhang angle" msgstr "Užpildo iškyšos kampas" msgid "The angle of the infill angled lines. 60° will result in a pure honeycomb." msgstr "Užpildo kampinių linijų kampas. Esant 180°C, 60° kampas sukurs gryną korį." msgid "Lightning overhang angle" msgstr "Žaibo (Lightning) užpildo iškyšos kampas" msgid "Maximum overhang angle for Lightning infill support propagation." msgstr "Maksimalus iškyšos kampas Žaibo (Lightning) užpildo atramų plitimui." msgid "Prune angle" msgstr "Genėjimo kampas" msgid "" "Controls how aggressively short or unsupported Lightning branches are pruned.\n" "This angle is converted internally to a per-layer distance." msgstr "" "Valdo, kaip agresyviai apkerpamos (genėjamos) trumpos arba neatremtos Žaibo (Lightning) užpildo šakos.\n" "Šis kampas programos viduje konvertuojamas į atstumą vienam sluoksniui." msgid "Straightening angle" msgstr "Tiesinimo kampas" msgid "Maximum straightening angle used to simplify Lightning branches." msgstr "Maksimalus tiesinimo kampas, naudojamas Žaibo (Lightning) užpildo šakų supaprastinimui." msgid "Sparse infill anchor length" msgstr "Reto užpildo tvirtinimo ilgis" msgid "" "Connect an infill line to an internal perimeter with a short segment of an additional perimeter. If expressed as percentage (example: 15%) it is calculated over infill extrusion width. Orca Slicer tries to connect two close infill lines to a short perimeter segment. If no such perimeter segment shorter than infill_anchor_max is found, the infill line is connected to a perimeter segment at just one side and the length of the perimeter segment taken is limited to this parameter, but no longer than anchor_length_max.\n" "Set this parameter to zero to disable anchoring perimeters connected to a single infill line." msgstr "" "Sujungia užpildo liniją su vidiniu perimetru trumpa papildomo perimetro atkarpa. Jei išreiškiama procentais (pvz., 10%), ji apskaičiuojama pagal užpildo ekstruzijos plotį. „OrcaSlicer“ bando sujungti dvi artimas užpildo linijas trumpu perimetro segmentu. Jei tokio perimetro segmento, trumpesnio už infill_anchor_max, nerandama, užpildo linija sujungiama su perimetro segmentu tik vienoje pusėje, o paimto perimetro segmento ilgis apribojamas šiuo parametru, bet ne ilgiau nei anchor_length_max.\n" "Nustatykite šį parametrą lygų nuliui, jei norite išjungti perimetrų tvirtinimą, kai jie sujungti su viena užpildo linija." msgid "0 (no open anchors)" msgstr "0 (nėra atvirų tvirtinimų)" msgid "1000 (unlimited)" msgstr "1000 (neribota)" msgid "Maximum length of the infill anchor" msgstr "Maksimalus užpildo tvirtinimo ilgis" msgid "" "Connect an infill line to an internal perimeter with a short segment of an additional perimeter. If expressed as percentage (example: 15%) it is calculated over infill extrusion width. Orca Slicer tries to connect two close infill lines to a short perimeter segment. If no such perimeter segment shorter than this parameter is found, the infill line is connected to a perimeter segment at just one side and the length of the perimeter segment taken is limited to infill_anchor, but no longer than this parameter.\n" "If set to 0, the old algorithm for infill connection will be used, it should create the same result as with 1000 & 0." msgstr "" "Sujungia užpildo liniją su vidiniu perimetru trumpa papildomo perimetro atkarpa. Jei išreiškiama procentais (pvz., 10%), ji apskaičiuojama pagal užpildo ekstruzijos plotį. „OrcaSlicer“ bando sujungti dvi artimas užpildo linijas trumpu perimetro segmentu. Jei tokio perimetro segmento, trumpesnio už šį parametrą, nerandama, užpildo linija sujungiama su perimetro segmentu tik vienoje pusėje, o paimto perimetro segmento ilgis apribojamas iki infill_anchor, bet ne ilgiau nei šis parametras.\n" "Jei nustatyta 0, bus naudojamas senasis užpildo sujungimo algoritmas, kuris turėtų sukurti tokį patį rezultatą kaip ir nustačius 1000 ir 0." msgid "0 (Simple connect)" msgstr "0 (paprastas prijungimas)" msgid "" "Filament to print internal sparse infill.\n" "\"Default\" uses the active object/part filament." msgstr "" "Gija, naudojama vidiniam retam užpildui spausdinti.\n" "Pasirinkus „Default“ (numatytasis), naudojama aktyvaus objekto / dalies gija." msgid "Line width of internal sparse infill. If expressed as a %, it will be computed over the nozzle diameter." msgstr "Vidinio reto užpildo linijos plotis. Jei išreiškiama procentais (%%), skaičiuojama nuo purkštuko skersmens." msgid "Infill/wall overlap" msgstr "Užpildo ir sienelės persidengimas" #, no-c-format, no-boost-format msgid "This allows the infill area to be enlarged slightly to overlap with walls for better bonding. The percentage value is relative to line width of sparse infill. Set this value to ~10-15% to minimize potential over extrusion and accumulation of material resulting in rough top surfaces." msgstr "Užpildo plotas yra šiek tiek padidinamas, kad persidengtų su sienele geresniam sukibimui. Procentinė vertė yra santykinė su reto užpildo linijos pločiu. Nustatykite šią vertę ties ~10–15%, kad sumažintumėte perteklinio išspaudimo (overextrusion) ir medžiagos sankaupų riziką, dėl kurios viršutiniai paviršiai tampa šiurkštūs." msgid "Top/Bottom solid infill/wall overlap" msgstr "Viršutinio / apatinio vientiso užpildo ir sienelės persidengimas" #, no-c-format, no-boost-format msgid "Top solid infill area is enlarged slightly to overlap with wall for better bonding and to minimize the appearance of pinholes where the top infill meets the walls. A value of 25-30% is a good starting point, minimizing the appearance of pinholes. The percentage value is relative to line width of sparse infill." msgstr "Viršutinio vientiso užpildo plotas yra šiek tiek padidinamas, kad persidengtų su sienele geresniam sukibimui ir sumažintų mikroskylučių (pinholes) susidarymą sandūroje. 25–30%% vertė yra geras pradinis taškas, sumažinantis skylučių matomumą. Procentinė vertė yra santykinė su reto užpildo linijos pločiu." msgid "This is the speed for internal sparse infill." msgstr "Vidinio reto užpildo greitis." msgid "Inherits profile" msgstr "Paveldi profilį" msgid "Name of parent profile." msgstr "Pagrindinio (pirminio) profilio pavadinimas." msgid "Interface shells" msgstr "Skiriamieji apvalkalai (Interface shells)" msgid "Force the generation of solid shells between adjacent materials/volumes. Useful for multi-extruder prints with translucent materials or manual soluble support material." msgstr "Priverstinai generuoja vientisus apvalkalus tarp besiribojančių medžiagų / tūrių. Naudinga spausdinant keliais ekstruderiais iš skaidrių medžiagų arba naudojant rankiniu būdu pašalinamas tirpias atramines medžiagas." msgid "Maximum width of a segmented region" msgstr "Didžiausias segmentuotos srities plotis" msgid "Maximum width of a segmented region. A value of 0 disables this feature." msgstr "Didžiausias segmentuotos srities plotis. Nulis išjungia šią funkciją." msgid "Interlocking depth of a segmented region" msgstr "Segmentuotos srities susikirtimo gylis" msgid "Interlocking depth of a segmented region. It will be ignored if \"mmu_segmented_region_max_width\" is zero or if \"mmu_segmented_region_interlocking_depth\" is bigger than \"mmu_segmented_region_max_width\". Zero disables this feature." msgstr "Segmentuoto regiono susikirtimo gylis. Jis bus ignoruojamas, jei „mmu_segmented_region_max_width“ yra nulis arba jei „mmu_segmented_region_interlocking_depth“ yra didesnis už „mmu_segmented_region_max_width“. Nulis išjungia šią funkciją." msgid "Use beam interlocking" msgstr "Naudoti sijų sujungimą (interlocking)" msgid "Generate interlocking beam structure at the locations where different filaments touch. This improves the adhesion between filaments, especially models printed in different materials." msgstr "Generuoja susijungiančių sijų struktūrą vietose, kur liečiasi skirtingos gijos. Tai pagerina gijų tarpusavio sukibimą, ypač kai modeliai spausdinami iš skirtingų medžiagų." msgid "Interlocking beam width" msgstr "Sujungimo sijų plotis" msgid "The width of the interlocking structure beams." msgstr "Susikertančių konstrukcijos sijų plotis." msgid "Interlocking direction" msgstr "Susiejimo kryptis" msgid "Orientation of interlock beams." msgstr "Sujungimo sijų orientacija." msgid "Interlocking beam layers" msgstr "Sujungimo sijų sluoksniai" msgid "The height of the beams of the interlocking structure, measured in number of layers. Less layers is stronger, but more prone to defects." msgstr "Sujungtos konstrukcijos sijų aukštis, matuojamas sluoksnių skaičiumi. Mažesnis sluoksnių skaičius yra tvirtesnis, bet labiau linkęs į defektus." msgid "Interlocking depth" msgstr "Sujungimo gylis" msgid "The distance from the boundary between filaments to generate interlocking structure, measured in cells. Too few cells will result in poor adhesion." msgstr "Atstumas nuo gijų sąlyčio ribos, kuriame generuojama sujungimo struktūra, matuojamas ląstelėmis. Esant per mažam ląstelių skaičiui sukibimas bus prastas." msgid "Interlocking boundary avoidance" msgstr "Sujungimo ribų vengimas" msgid "The distance from the outside of a model where interlocking structures will not be generated, measured in cells." msgstr "Atstumas nuo modelio išorės, kai nesukuriamos susikertančios struktūros, matuojamas ląstelėmis." msgid "Ironing type" msgstr "Lyginimo tipas" msgid "Ironing uses a small flow to print at the same height of a surface to make flat surfaces smoother. This setting controls which layers are being ironed." msgstr "Lyginimas (angl. \"ironing\") naudoja nedidelį srautą spausdinimui tame pačiame paviršiaus aukštyje, kad lygūs paviršiai taptų glotnesni. Šis nustatymas valdo, kurie sluoksniai yra lyginami." msgid "No ironing" msgstr "Nėra lyginimo" msgid "All top surfaces" msgstr "Visi viršutiniai paviršiai" msgid "Topmost surface only" msgstr "Tik viršutinis paviršius" msgid "All solid layers" msgstr "Visi vientisi sluoksniai" msgid "Ironing Pattern" msgstr "Lyginimo raštas" msgid "The pattern that will be used when ironing." msgstr "Raštas, kuris bus naudojamas lyginant." msgid "This is the amount of material to be extruded during ironing. It is relative to the flow of normal layer height. Too high a value will result in overextrusion on the surface." msgstr "Medžiagos kiekis, išspaudžiamas lyginimo metu. Santykinis dydis, skaičiuojamas pagal įprasto sluoksnio aukščio srautą. Per didelė vertė sukelia perteklinį medžiagos išspaudimą (overextrusion) ant paviršiaus." msgid "This is the distance between the lines used for ironing." msgstr "Atstumas tarp lyginimo linijų" msgid "The distance to keep from the edges. A value of 0 sets this to half of the nozzle diameter." msgstr "Atstumas, kurį reikia išlaikyti nuo kraštų. Įrašius 0, nustatoma pusė purkštuko skersmens vertės." msgid "This is the print speed for ironing lines." msgstr "Lyginimo linijų spausdinimo greitis." msgid "Ironing angle offset" msgstr "Lyginimo kampo nuokrypis (offset)" msgid "The angle of ironing lines offset from the top surface." msgstr "Lyginimo linijų kampo nuokrypis nuo viršutinio paviršiaus linijų krypties." msgid "Fixed ironing angle" msgstr "Fiksuotas lyginimo kampas" msgid "Use a fixed absolute angle for ironing." msgstr "Naudoti fiksuotą absoliutų lyginimo kampą." msgid "Ironing expansion" msgstr "Lyginimo zonos išplėtimas" msgid "Expand or contract the ironing area." msgstr "Išplėsti arba susiaurinti lyginamąjį plotą." msgid "Z contouring enabled" msgstr "Įjungtas Z-ašies kontūravimas" msgid "Enable Z-layer contouring (aka Z-layer anti-aliasing)." msgstr "Įjungti Z-sluoksnių kontūravimą (dar žinomą kaip Z-sluoksnių glotninimą / anti-aliasing)." msgid "Minimize wall height angle" msgstr "Sienelės aukščio kampo minimizavimas" msgid "" "Reduce the height of top-surface perimeters to match the model edge height.\n" "Affects perimeters with a slope less than this angle (degrees).\n" "A reasonable value is 35. Set to 0 to disable." msgstr "" "Sumažinti viršutinio paviršiaus perimetrų aukštį, kad jis sutaptų su modelio krašto aukščiu.\n" "Paveikia perimetrus, kurių nuolydis yra mažesnis už šį kampą (laipsniais).\n" "Protinga vertė yra 35. Nustatykite 0, kad išjungtumėte." msgid "Don't alternate fill direction" msgstr "Nekeisti užpildymo krypties pakaitomis" msgid "Disable alternating fill direction when using Z contouring." msgstr "Išjungti pakaitomis keičiamą užpildo kryptį naudojant Z-ašies kontūravimą." msgid "Minimum Z height" msgstr "Minimalus Z-ašies aukštis" msgid "" "Minimum Z-layer height.\n" "Also controls the slicing plane." msgstr "" "Minimalus Z-sluoksnio aukštis.\n" "Taip pat valdo pjaustymo plokštumą." msgid "This G-code is inserted at every layer change after the Z lift." msgstr "Šis G-kodas įterpiamas atliekant kiekvieną sluoksnio pakeitimą po Z-ašies pakėlimo." msgid "Clumping detection G-code" msgstr "Sankaupų (clumping) aptikimo G-kodas" msgid "Silent Mode" msgstr "Tylusis režimas" msgid "Whether the machine supports silent mode in which machine uses lower acceleration to print more quietly" msgstr "Ar įrenginys palaiko tylųjį režimą, kai spausdindamas naudoja mažesnį pagreitį." msgid "Emit limits to G-code" msgstr "Įrašyti apribojimus į G-kodą (Emit)" msgid "Machine limits" msgstr "Įrenginio apribojimai (Machine limits)" msgid "" "If enabled, the machine limits will be emitted to G-code file.\n" "This option will be ignored if the G-code flavor is set to Klipper." msgstr "" "Jei įjungta, įrenginio apribojimai bus įrašyti į G-kodo failą.\n" "Ši parinktis ignoruojama, jei G-kodo tipas (flavor) nustatytas kaip „Klipper“." msgid "This G-code will be used as a code for the pause print. Users can insert pause G-code in the G-code viewer." msgstr "Šis G-kodas bus naudojamas spausdinimo pauzei. Naudotojai gali įterpti pauzės G-kodą per G-kodo peržiūros langą." msgid "This G-code will be used as a custom code." msgstr "Šis G-kodas bus naudojamas kaip pasirinktinis kodas." msgid "Small area flow compensation (beta)" msgstr "Mažo ploto srauto kompensavimas (beta)" msgid "Enable flow compensation for small infill areas." msgstr "Įjungti srauto kompensavimą mažiems užpildo plotams." msgid "Flow Compensation Model" msgstr "Srauto kompensavimo modelis" msgid "Flow Compensation Model, used to adjust the flow for small infill areas. The model is expressed as a comma separated pair of values for extrusion length and flow correction factor. Each pair is on a separate line, followed by a semicolon, in the following format: \"1.234, 5.678;\"" msgstr "Srauto kompensavimo modelis, naudojamas srautui mažuose užpildo plotuose koreguoti. Modelis pateikiamas kableliu atskirtų verčių poromis: ekstruzijos ilgis ir srauto korekcijos koeficientas. Kiekviena pora rašoma atskiroje eilutėje su kabliataškiu gale, pavyzdžiui: „1.234, 5.678;“" msgid "Maximum speed X" msgstr "Didžiausias X greitis" msgid "Maximum speed Y" msgstr "Didžiausias Y greitis" msgid "Maximum speed Z" msgstr "Didžiausias Z greitis" msgid "Maximum speed E" msgstr "Didžiausias E greitis" msgid "Maximum X speed" msgstr "Didžiausias X greitis" msgid "Maximum Y speed" msgstr "Didžiausias Y greitis" msgid "Maximum Z speed" msgstr "Didžiausias Z greitis" msgid "Maximum E speed" msgstr "Didžiausias E greitis" msgid "Maximum acceleration X" msgstr "Didžiausias pagreitis X" msgid "Maximum acceleration Y" msgstr "Didžiausias pagreitis Y" msgid "Maximum acceleration Z" msgstr "Didžiausias pagreitis Z" msgid "Maximum acceleration E" msgstr "Didžiausias pagreitis E" msgid "Maximum acceleration of the X axis" msgstr "Didžiausias X ašies pagreitis" msgid "Maximum acceleration of the Y axis" msgstr "Didžiausias Y ašies pagreitis" msgid "Maximum acceleration of the Z axis" msgstr "Didžiausias Z ašies pagreitis" msgid "Maximum acceleration of the E axis" msgstr "Didžiausias E ašies pagreitis" msgid "Maximum jerk X" msgstr "Didžiausias trūkčiojimas X" msgid "Maximum jerk Y" msgstr "Didžiausias trūkčiojimas Y" msgid "Maximum jerk Z" msgstr "Didžiausias trūkčiojimas Z" msgid "Maximum jerk E" msgstr "Didžiausias trūkčiojimas E" msgid "Maximum jerk of the X axis" msgstr "Didžiausias X ašies trūkčiojimas" msgid "Maximum jerk of the Y axis" msgstr "Didžiausias Y ašies trūkčiojimas" msgid "Maximum jerk of the Z axis" msgstr "Didžiausias Z ašies trūkčiojimas" msgid "Maximum jerk of the E axis" msgstr "Didžiausias E ašies trūkčiojimas" msgid "Maximum Junction Deviation" msgstr "Didžiausias posūkio nuokrypis" msgid "" "Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin Firmware\n" "If your Marlin 2 printer uses Classic Jerk set this value to 0.)" msgstr "Didžiausias posūkio nuokrypis (M205 J, taikoma tik jei JD > 0 „Marlin“ programinėje aparatinėje įrangoje. Jei jūsų Marlin 2 spausdintuvas naudoja klasikinį trūkčiojimą, nustatykite šią reikšmę į 0.)" msgid "Minimum speed for extruding" msgstr "Mažiausias išstūmimo greitis" msgid "Minimum speed for extruding (M205 S)" msgstr "Mažiausias išstūmimo greitis (M205 S)" msgid "Minimum travel speed" msgstr "Mažiausias tuščios eigos greitis" msgid "Minimum travel speed (M205 T)" msgstr "Mažiausias tuščios eigos greitis (M205 T)" # AI Translated msgid "Maximum force of the Y axis" msgstr "Didžiausia Y ašies jėga" # AI Translated msgid "The allowed maximum output force of Y axis" msgstr "Leidžiama didžiausia Y ašies išvesties jėga" # AI Translated msgid "N" msgstr "N" # AI Translated msgid "Bed mass of the Y axis" msgstr "Y ašies pagrindo masė" # AI Translated msgid "The machine bed mass load of Y axis" msgstr "Įrenginio pagrindo masės apkrova Y ašiai" # AI Translated msgid "g" msgstr "g" # AI Translated msgid "The allowed max printed mass" msgstr "Leidžiama didžiausia spausdinamų dalių masė" # AI Translated msgid "The allowed max printed mass on a plate" msgstr "Leidžiama didžiausia spausdinamų dalių masė ant pagrindo" msgid "Maximum acceleration for extruding" msgstr "Didžiausias išstūmimo pagreitis" msgid "Maximum acceleration for extruding (M204 P)" msgstr "Didžiausias išstūmimo pagreitis (M204 P)" msgid "Maximum acceleration for retracting" msgstr "Didžiausias įtraukimo pagreitis" msgid "Maximum acceleration for retracting (M204 R)" msgstr "Didžiausias įtraukimo pagreitis (M204 R)" msgid "Maximum acceleration for travel" msgstr "Didžiausias tuščios eigos pagreitis" msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2." msgstr "Didžiausias tuščios eigos pagreitis (M204 T), jis taikomas tik „Marlin 2“." msgid "Resonance avoidance" msgstr "Rezonanso vengimas" msgid "" "By reducing the speed of the outer wall to avoid the resonance zone of the printer, ringing on the surface of the model are avoided.\n" "Please turn this option off when testing ringing." msgstr "" "Sumažinus išorinės sienelės greitį, kad būtų išvengta spausdintuvo rezonanso zonos, išvengiama modelio paviršiaus virpėjimo (VFA). \n" "Išjunkite šią parinktį, kai testuojate virpėjimą (VFA)." msgid "Min" msgstr "Min" msgid "Minimum speed of resonance avoidance." msgstr "Minimalus greitis, leidžiantis išvengti rezonanso." msgid "Max" msgstr "Maks" msgid "Maximum speed of resonance avoidance." msgstr "Maksimalus greitis, leidžiantis išvengti rezonanso." msgid "Emit input shaping" msgstr "Įtraukti įvesties formavimą (Input shaping)" msgid "" "Override firmware input shaping settings.\n" "If disabled, firmware settings are used." msgstr "Perrašyti programinės aparatinės įrangos įvesties formavimo (Input shaping) nustatymus. Jei išjungta, naudojami numatytieji aparatinės įrangos nustatymai." msgid "Input shaper type" msgstr "Įvesties formuotojo (Input shaper) tipas" msgid "" "Choose the input shaper algorithm.\n" "Default uses the firmware default settings.\n" "Disable turns off input shaping in the firmware." msgstr "Pasirinkite įvesties formuotojo (Input shaper) algoritmą. Pasirinkus numatytąjį, naudojami programinės aparatinės įrangos nustatymai. Pasirinkus „Išjungta“, įvesties formavimas aparatinėje įrangoje yra išjungiamas." msgid "MZV" msgstr "MZV" msgid "ZV" msgstr "ZV" msgid "ZVD" msgstr "ZVD" msgid "ZVDD" msgstr "ZVDD" msgid "ZVDDD" msgstr "ZVDDD" msgid "EI" msgstr "EI" msgid "EI2" msgstr "EI2" msgid "2HUMP_EI" msgstr "2HUMP_EI" msgid "EI3" msgstr "EI3" msgid "3HUMP_EI" msgstr "3HUMP_EI" msgid "DAA" msgstr "DAA" msgid "X" msgstr "X" msgid "" "Resonant frequency for the X axis input shaper.\n" "Zero will use the firmware frequency.\n" "To disable input shaping, use the Disable type.\n" "RRF: X and Y values are equal." msgstr "" "X ašies įvesties formuotojo (Input shaper) rezonansinis dažnis. \n" "Įrašius nulį, bus naudojamas aparatinės įrangos dažnis. \n" "Norėdami išjungti įvesties formavimą, pasirinkite tipą „Išjungta“.\n" " RRF: X ir Y reikšmės yra lygios." msgid "Hz" msgstr "Hz" msgid "Y" msgstr "Y" msgid "" "Resonant frequency for the Y axis input shaper.\n" "Zero will use the firmware frequency.\n" "To disable input shaping, use the Disable type." msgstr "" "Y ašies įvesties formuotojo (Input shaper) rezonansinis dažnis. \n" "Įrašius nulį, bus naudojamas aparatinės įrangos dažnis. \n" "Norėdami išjungti įvesties formavimą, pasirinkite tipą „Išjungta“." msgid "" "Damping ratio for the X axis input shaper.\n" "Zero will use the firmware damping ratio.\n" "To disable input shaping, use the Disable type.\n" "RRF: X and Y values are equal." msgstr "" "X ašies įvesties formuotojo (Input shaper) slopinimo koeficientas.\n" "Įrašius nulį, bus naudojamas aparatinės įrangos slopinimo koeficientas. \n" "Norėdami išjungti įvesties formavimą, pasirinkite tipą „Išjungta“.\n" "RRF: X ir Y reikšmės yra lygios." msgid "" "Damping ratio for the Y axis input shaper.\n" "Zero will use the firmware damping ratio.\n" "To disable input shaping, use the Disable type." msgstr "" "Y ašies įvesties formuotojo (Input shaper) slopinimo koeficientas. \n" "Įrašius nulį, bus naudojamas aparatinės įrangos slopinimo koeficientas. \n" "Norėdami išjungti įvesties formavimą, pasirinkite tipą „Išjungta“." msgid "The part cooling fan speed may be increased when auto cooling is enabled. This is the maximum speed for the part cooling fan." msgstr "Kai įjungtas automatinis aušinimas, modelio aušinimo ventiliatoriaus greitis gali būti padidintas. Tai yra didžiausias modelio aušinimo ventiliatoriaus greitis." msgid "The highest printable layer height for the extruder. Used to limit the maximum layer height when enable adaptive layer height." msgstr "Didžiausias galimas spausdinimo sluoksnio aukštis ekstruderiui. Naudojamas maksimaliam sluoksnio aukščiui apriboti, kai įjungtas prisitaikantis sluoksnio aukštis." msgid "Extrusion rate smoothing" msgstr "Išstūmimo greičio išlyginimas" msgid "" "This parameter smooths out sudden extrusion rate changes that happen when the printer transitions from printing a high flow (high speed/larger width) extrusion to a lower flow (lower speed/smaller width) extrusion and vice versa.\n" "\n" "It defines the maximum rate by which the extruded volumetric flow in mm³/s can change over time. Higher values mean higher extrusion rate changes are allowed, resulting in faster speed transitions.\n" "\n" "A value of 0 disables the feature.\n" "\n" "For a high speed, high flow direct drive printer (like the Bambu lab or Voron) this value is usually not needed. However it can provide some marginal benefit in certain cases where feature speeds vary greatly. For example, when there are aggressive slowdowns due to overhangs. In these cases a high value of around 300-350 mm³/s² is recommended as this allows for just enough smoothing to assist pressure advance achieve a smoother flow transition.\n" "\n" "For slower printers without pressure advance, the value should be set much lower. A value of 10-15 mm³/s² is a good starting point for direct drive extruders and 5-10 mm³/s² for Bowden style.\n" "\n" "This feature is known as Pressure Equalizer in Prusa slicer.\n" "\n" "Note: this parameter disables arc fitting." msgstr "" "Siūlomas lietuviškas tekstas: Šis parametras išlygina staigius išstūmimo greičio pokyčius, kurie įvyksta spausdintuvui pereinant nuo didelio srauto (didelio greičio / didesnio pločio) išstūmimo prie mažesnio srauto (mažesnio greičio / mažesnio pločio) ir atvirkščiai.\n" "\n" "Jis apibrėžia didžiausią spartą, kuria tūrinis srautas (mm³/s) gali kisti per laiko vienetą. Didesnės reikšmės reiškia, kad leidžiami staigesni išstūmimo srauto pokyčiai, užtikrinantys greitesnį greičio perėjimą.\n" "\n" "Reikšmė 0 išjungia šią funkciją.\n" "\n" "Spartiems, didelio srauto tiesioginės pavaros (Direct Drive) spausdintuvams (tokiems kaip „Bambu Lab“ arba „Voron“) ši reikšmė paprastai nėra būtina. Vis dėlto ji gali duoti nedidelės naudos tais atvejais, kai spausdinimo elementų greičiai labai skiriasi – pavyzdžiui, esant žymiems sulėtėjimams ties iškyšomis. Tokiais atvejais rekomenduojama didelė reikšmė (apie 300–350 mm³/s²), kuri užtikrina pakankamą išlyginimą, padedantį slėgio kompensavimo (Pressure Advance) algoritmui pasiekti sklandesnį srauto perėjimą.\n" "\n" "Lėtesniems spausdintuvams be slėgio kompensavimo (Pressure Advance) šią reikšmę reikėtų nustatyti gerokai mažesnę. Tiesioginės pavaros (Direct Drive) ekstruderiams gera pradinė reikšmė yra 10–15 mm³/s², o „Bowden“ tipo – 5–10 mm³/s².\n" "\n" "„PrusaSlicer“ programoje ši funkcija vadinama „Pressure Equalizer“.\n" "\n" "Pastaba: šis parametras išjungia lankų aproksimaciją (Arc fitting)." msgid "mm³/s²" msgstr "mm³/s²" msgid "Smoothing segment length" msgstr "Išlyginamojo segmento ilgis" msgid "" "A lower value results in smoother extrusion rate transitions. However, this results in a significantly larger G-code file and more instructions for the printer to process.\n" "\n" "Default value of 3 works well for most cases. If your printer is stuttering, increase this value to reduce the number of adjustments made.\n" "\n" "Allowed values: 0.5-5" msgstr "" "Mažesnė reikšmė užtikrina sklandesnius išstūmimo greičio perėjimus. Tačiau dėl to G-kodo (G-code) failas tampa žymiai didesnis ir spausdintuvas turi apdoroti daugiau instrukcijų.\n" "\n" "Numatytoji reikšmė 3 puikiai tinka daugumai atvejų. Jei spausdintuvas striginėja, padidinkite šią reikšmę, kad sumažintumėte atliekamų koregavimų skaičių.\n" "\n" "Leidžiamos reikšmės: 0.5–5" msgid "Apply only on external features" msgstr "Taikyti tik išoriniams elementams" msgid "Applies extrusion rate smoothing only on external perimeters and overhangs. This can help reduce artefacts due to sharp speed transitions on externally visible overhangs without impacting the print speed of features that will not be visible to the user." msgstr "Išstūmimo greičio išlyginimas taikomas tik išoriniams perimetrams ir iškyšoms. Tai padeda sumažinti artefaktus, atsirandančius dėl staigių greičio perėjimų išorėje matomose iškyšose, nedarant įtakos nematomų elementų spausdinimo greičiui." msgid "Minimum speed for part cooling fan." msgstr "Mažiausias modelio aušinimo ventiliatoriaus greitis." msgid "" "Speed of auxiliary part cooling fan. Auxiliary fan will run at this speed during printing except the first several layers which is defined by no cooling layers.\n" "Please enable auxiliary_fan in printer settings to use this feature. G-code command: M106 P2 S(0-255)" msgstr "" "Papildomo modelio aušinimo ventiliatoriaus greitis. Papildomas ventiliatorius veiks šiuo greičiu spausdinimo metu, išskyrus pirmuosius kelis sluoksnius, nurodytus neaušinamų sluoksnių nustatymuose.\n" "Norėdami naudoti šią funkciją, spausdintuvo nustatymuose įjunkite „auxiliary_fan“. G-kodo komanda: M106 P2 S(0-255)" msgid "For the first" msgstr "Pirmiesiems" msgid "Set special auxiliary cooling fan for the first certain layers." msgstr "Nustatyti specialų papildomo ventiliatoriaus aušinimą pirmiesiems nurodytiems sluoksniams." msgid "" "Auxiliary fan speed will be ramped up linearly from layer \"For the first\" to maximum at layer \"Full fan speed at layer\".\n" "\"Full fan speed at layer\" will be ignored if lower than \"For the first\", in which case the fan will run at maximum allowed speed at layer \"For the first\" + 1." msgstr "" "Papildomo ventiliatoriaus greitis bus didinamas tiesiškai nuo sluoksnio „Pirmiesiems“ iki maksimumo ties sluoksniu „Pilnas ventiliatoriaus greitis ties sluoksniu“.\n" "Sluoksnis „Pilnas ventiliatoriaus greitis ties sluoksniu“ bus ignoruojamas, jei jis yra žemesnis nei „Pirmiesiems“ – tokiu atveju ventiliatorius veiks maksimaliu leidžiamu greičiu ties sluoksniu „Pirmiesiems“ + 1." msgid "Special auxiliary cooling fan speed, effective only for the first x layers." msgstr "Specialus papildomo aušinimo ventiliatoriaus greitis, galiojantis tik pirmiesiems x sluoksnių." msgid "The lowest printable layer height for the extruder. Used to limit the minimum layer height when enable adaptive layer height." msgstr "Mažiausias galimas spausdinimo sluoksnio aukštis ekstruderiui. Naudojamas minimaliam sluoksnio aukštį apriboti, kai įjungtas prisitaikantis sluoksnio aukštis." msgid "Min print speed" msgstr "Minimalus spausdinimo greitis" msgid "The minimum print speed to which the printer slows down to maintain the minimum layer time defined above when the slowdown for better layer cooling is enabled." msgstr "Mažiausias spausdinimo greitis, iki kurio spausdintuvas sulėtėja, kad išlaikytų pirmiau apibrėžtą minimalų sluoksnio laiką, kai įjungtas sulėtinimas dėl geresnio sluoksnių aušinimo." msgid "The diameter of nozzle." msgstr "Purkštuko skersmuo." msgid "Configuration notes" msgstr "Konfigūracijos pastabos" msgid "You can put here your personal notes. This text will be added to the G-code header comments." msgstr "Čia galite įdėti savo asmeninius užrašus. Šis tekstas bus pridėtas prie G kodo antraštės komentarų." msgid "Host Type" msgstr "Serverio (Host) tipas" msgid "Orca Slicer can upload G-code files to a printer host. This field must contain the kind of the host." msgstr "„OrcaSlicer“ gali įkelti G-kodo (G-code) failus į spausdintuvo serverį (Host). Šiame lauke turi būti nurodytas serverio tipas." msgid "Nozzle volume" msgstr "Purkštuko tūris" msgid "Volume of nozzle between the filament cutter and the end of the nozzle" msgstr "Purkštuko tūris tarp nukirpimo ir purkštuko galo." msgid "Cooling tube position" msgstr "Aušinimo vamzdžio padėtis" msgid "Distance of the center-point of the cooling tube from the extruder tip." msgstr "Aušinimo vamzdžio centro taško atstumas nuo ekstruderio antgalio." msgid "Cooling tube length" msgstr "Aušinimo vamzdžio ilgis" msgid "Length of the cooling tube to limit space for cooling moves inside it." msgstr "Aušinimo vamzdžio ilgis, kad būtų apribota erdvė aušinimo judesiams viduje." msgid "High extruder current on filament swap" msgstr "Padidinta ekstruderio srovė keičiant giją" msgid "It may be beneficial to increase the extruder motor current during the filament exchange sequence to allow for rapid ramming feed rates and to overcome resistance when loading a filament with an ugly shaped tip." msgstr "Gali būti naudinga padidinti ekstruderio variklio srovę gijos keitimo sekos metu – tai leidžia užtikrinti didelę gijos kalimo (ramming) spartą ir įveikti pasipriešinimą prastumiant giją su netaisyklingos formos galiuku." msgid "Filament parking position" msgstr "Gijos parkavimo padėtis" msgid "Distance of the extruder tip from the position where the filament is parked when unloaded. This should match the value in printer firmware." msgstr "Ekstruderio antgalio atstumas nuo padėties, kurioje gija yra priparkuojama ją iškrovus. Ši reikšmė turi sutapti su nurodyta spausdintuvo aparatinėje įrangoje (firmware)." msgid "Extra loading distance" msgstr "Papildomas gijos įkrovimo atstumas" msgid "When set to zero, the distance the filament is moved from parking position during load is exactly the same as it was moved back during unload. When positive, it is loaded further, if negative, the loading move is shorter than unloading." msgstr "Nustačius nulį, atstumas, kuriuo gija pastumiama iš parkavimo padėties įkrovimo metu, yra tiksliai toks pat, kokiu ji buvo atitraukta iškrovimo metu. Esant teigiamai reikšmei, gija įkraunama giliau, esant neigiamai – įkrovimo judesys yra trumpesnis nei iškrovimo." msgid "Start end points" msgstr "Pradžios ir pabaigos taškai" msgid "The start and end points which are from the cutter area to the excess chute." msgstr "Pradžios ir pabaigos taškai, esantys tarp gijos kirpimo zonos ir atliekų konteinerio." msgid "Reduce infill retraction" msgstr "Sumažinti užpildo įtraukimą (Retraction)" msgid "Don't retract when the travel is entirely within an infill area. That means the oozing can't been seen. This can reduce times of retraction for complex model and save printing time, but make slicing and G-code generating slower. Note that z-hop is also not performed in areas where retraction is skipped." msgstr "Neatlikti gijos įtraukimo, kai tuščioji eiga vyksta tik užpildo zonoje. Tokiu atveju gijos varvėjimas (oozing) išorėje bus nematomas. Tai leidžia sumažinti įtraukimų skaičių sudėtingiems modeliams ir sutaupyti spausdinimo laiko, tačiau sulėtina sluoksniavimą bei G-kodo (G-code) generavimą. Pastaba: zonose, kuriose įtraukimas praleidžiamas, „Z-hop“ judesys taip pat neatliekamas." msgid "This option will drop the temperature of the inactive extruders to prevent oozing." msgstr "Ši parinktis sumažina neaktyvių ekstruderių temperatūrą, kad būtų išvengta gijos varvėjimo (oozing)." msgid "Filename format" msgstr "Failų pavadinimų formatas" msgid "Users can decide project file names when exporting." msgstr "Eksportuojant vartotojai gali pasirinkti projekto failų pavadinimą." msgid "Make overhangs printable" msgstr "Padaryti iškyšas spausdinamas" msgid "Modify the geometry to print overhangs without support material." msgstr "Pakeisti geometriją, kad būtų galima spausdinti iškyšas be atraminės medžiagos." msgid "Make overhangs printable - Maximum angle" msgstr "Padaryti iškyšas spausdinamas – didžiausias kampas" msgid "Maximum angle of overhangs to allow after making more steep overhangs printable.90° will not change the model at all and allow any overhang, while 0 will replace all overhangs with conical material." msgstr "Didžiausias leistinas iškyšų kampas, pritaikius algoritmą. 90° kampas visiškai nepakeis modelio ir leis bet kokias iškyšas, o 0° reikšmė visas iškyšas pakeis po jomis esančia kūgine atramine medžiaga." msgid "Make overhangs printable - Hole area" msgstr "Padaryti iškyšas spausdinamas – kiaurymės plotas" msgid "Maximum area of a hole in the base of the model before it's filled by conical material. A value of 0 will fill all the holes in the model base." msgstr "Didžiausias modelio pagrinde esančios kiaurymės plotas, kurį viršijus ji užpildoma kūgine medžiaga. Reikšmė 0 užpildys visas modelio pagrinde esančias kiaurymes." msgid "Detect overhang walls" msgstr "Aptikti iškyšų sieneles" #, c-format, boost-format msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used." msgstr "Nustatykite iškyšos procentinę dalį, palyginti su linijos pločiu, ir naudokite skirtingą spausdinimo greitį. Jei iškyša 100%%, naudojamas tilto greitis." msgid "Outer walls" msgstr "Išorinės sienelės" msgid "" "Filament to print outer walls.\n" "\"Default\" uses the active object/part filament." msgstr "Gija, naudojama išorinėms sienelėms spausdinti. Pasirinkus „Numatytasis“, naudojama aktyvaus objekto / dalies gija." msgid "Inner walls" msgstr "Vidinės sienelės" msgid "" "Filament to print inner walls.\n" "\"Default\" uses the active object/part filament." msgstr "Gija, naudojama vidinėms sienelėms spausdinti. Pasirinkus „Numatytasis“, naudojama aktyvaus objekto / dalies gija." msgid "Line width of inner wall. If expressed as a %, it will be computed over the nozzle diameter." msgstr "Vidinės sienelės linijos plotis. Jei išreiškiama %, reikšmė apskaičiuojama pagal purkštuko skersmenį." msgid "This is the speed for inner walls." msgstr "Vidinių sienelių greitis." msgid "This is the number of walls per layer." msgstr "Sienelių skaičius kiekviename sluoksnyje." msgid "Alternate extra wall" msgstr "Alternatyvi papildoma sienelė" msgid "" "This setting adds an extra wall to every other layer. This way the infill gets wedged vertically between the walls, resulting in stronger prints.\n" "\n" "When this option is enabled, the ensure vertical shell thickness option needs to be disabled.\n" "\n" "Using lightning infill together with this option is not recommended as there is limited infill to anchor the extra perimeters to." msgstr "" "Šis nustatymas prie kiekvieno kito sluoksnio prideda papildomą sienelę. Taip užpildas vertikaliai įsiterpia tarp sienelių, todėl atspaudai tampa tvirtesni.\n" "\n" "Kai ši parinktis įjungta, reikia išjungti parinktį Užtikrinti vertikalų apvalkalo storį.\n" "\n" "Naudoti žaibo užpildą kartu su šia parinktimi nerekomenduojama, nes yra nedaug užpildo, prie kurio būtų galima pritvirtinti papildomą perimetrą." msgid "If you want to process the output G-code through custom scripts, just list their absolute paths here. Separate multiple scripts with a semicolon. Scripts will be passed the absolute path to the G-code file as the first argument, and they can access the Orca Slicer config settings by reading environment variables." msgstr "Jei norite apdoroti išvesties G-kodą (G-code) per pasirinktinius scenarijus (scripts), nurodykite jų absoliučiuosius kelius čia. Kelis scenarijus atskirkite kabliataškiu. Scenarijams kaip pirmasis argumentas bus perduotas absoliutusis kelias iki G-kodo failo, o „OrcaSlicer“ konfigūracijos nustatymus jie galės pasiekti per aplinkos kintamuosius (environment variables)." msgid "Change extrusion role G-code (process)" msgstr "Išstūmimo tipo keitimo G-kodas (procesas)" msgid "This G-code is inserted when the extrusion role is changed. It runs after the machine and filament extrusion role G-code." msgstr "Šis G-kodas įterpiamas pasikeitus išstūmimo tipui. Jis vykdomas po spausdintuvo ir gijos išstūmimo tipo G-kodo." # AI Translated msgid "Plugins Used" msgstr "Naudojami papildiniai" # AI Translated msgid "Plugin capabilities referenced by this preset, stored as name;uuid;capability." msgstr "Šio profilio naudojamos papildinių galimybės, saugomos kaip name;uuid;capability." # AI Translated msgid "Python plugin(s) invoked at each slicing pipeline step to read and modify intermediate slicing data, including a final G-code post-processing step. Research/experimental." msgstr "Python papildinys (-iai), iškviečiamas kiekviename pjaustymo konvejerio žingsnyje, kad nuskaitytų ir keistų tarpinius pjaustymo duomenis, įskaitant galutinį G-code po apdorojimo žingsnį. Tyrimų/eksperimentinis." msgid "Printer type" msgstr "Spausdintuvo tipas" msgid "Type of the printer." msgstr "Spausdintuvo tipas." msgid "Printer notes" msgstr "Spausdintuvo užrašai" msgid "You can put your notes regarding the printer here." msgstr "Čia galite pridėti pastabas apie spausdintuvą." msgid "Printer variant" msgstr "Spausdintuvo variantas" msgid "Raft contact Z distance" msgstr "Pagrindo (Raft) kontakto Z atstumas" msgid "Z gap between raft and object. If Support Top Z Distance is 0, this value is ignored and the object is printed in direct contact with the raft (no gap)." msgstr "Z ašies tarpas tarp pagrindo (Raft) ir objekto. Jei viršutinis atramų Z atstumas yra 0, ši reikšmė ignoruojama ir objektas spausdinamas tiesiogiai kontaktuojant su pagrindu (Raft) (be tarpo)." msgid "Raft expansion" msgstr "Pagrindo (Raft) išplėtimas" msgid "This expands all raft layers in XY plane." msgstr "Išplėsti visus pagrindo (Raft) sluoksnius XY plokštumoje." msgid "First layer density" msgstr "Pradinio sluoksnio tankis" msgid "This is the density of the first raft or support layer." msgstr "Pirmojo pagrindo (Raft) arba atraminio sluoksnio tankis." msgid "First layer expansion" msgstr "Pradinio sluoksnio išplėtimas" msgid "This expands the first raft or support layer to improve bed adhesion." msgstr "Tai išplečia pirmąjį atraminio pagrindo arba atramų sluoksnį, siekiant pagerinti sukibimą su spausdinimo paviršiumi." msgid "Raft layers" msgstr "Pagrindo (Raft) sluoksniai" msgid "Object will be raised by this number of support layers. Use this function to avoid warping when printing ABS." msgstr "Objektas bus pakeltas per nurodytą pagrindo sluoksnių skaičių. Naudokite šią funkciją, kad išvengtumėte deformavimosi (warping) spausdinant ABS gija." msgid "The G-code path is generated after simplifying the contour of models to avoid too many points and G-code lines. Smaller values mean higher resolution and more time required to slice." msgstr "G-kodo kelias sugeneruojamas supaprastinus modelių kontūrą, siekiant išvengti per didelio taškų ir G-kodo eilučių skaičiaus. Mažesnės reikšmės reiškia didesnę raišką ir daugiau laiko, reikalingo pjaustymui (angl. \"slicing\")." msgid "Travel distance threshold" msgstr "Tuščios eigos atstumo riba" msgid "Only trigger retraction when the travel distance is longer than this threshold." msgstr "Gijos įtraukimas (Retraction) suveikia tik tada, kai tuščios eigos atstumas yra ilgesnis už šią ribą." msgid "Retract amount before wipe" msgstr "Gijos įtraukimo kiekis prieš valymą (Wipe)" msgid "This is the length of fast retraction before a wipe, relative to retraction length." msgstr "Tai yra greitojo atitraukimo ilgis prieš valymą (angl. \"wipe\"), santykinai su bendru atitraukimo ilgiu." # AI Translated msgid "Retract amount after wipe" msgstr "Atitraukimo kiekis po nubraukimo" # AI Translated #, no-c-format, no-boost-format msgid "" "The length of fast retraction after wipe, relative to retraction length.\n" "The value will be clamped by 100% minus the retract amount before the wipe value." msgstr "" "Greito atitraukimo ilgis po nubraukimo, atsižvelgiant į atitraukimo ilgį.\n" "Reikšmė bus apribota iki 100 % atėmus atitraukimo kiekį prieš nubraukimą." msgid "Retract on layer change" msgstr "Įtraukti pakeitus sluoksnį" msgid "This forces a retraction on layer changes." msgstr "Tai priverčia atlikti atitraukimą (angl. \"retraction\") keičiant sluoksnius." msgid "Retraction Length" msgstr "Įtraukimo (Retraction) ilgis" msgid "Some amount of material in extruder is pulled back to avoid ooze during long travel. Set zero to disable retraction." msgstr "Tam tikras gijos kiekis ekstruderyje yra įtraukiamas atgal, kad ilgos tuščios eigos metu gija nevarvėtų (ooze). Nustatykite nulį, jei norite išjungti įtraukimą." msgid "Long retraction when cut (beta)" msgstr "Ilgas įtraukimas, kai pjaunama (beta)" msgid "Experimental feature: Retracting and cutting off the filament at a longer distance during changes to minimize purge. While this reduces flush significantly, it may also raise the risk of nozzle clogs or other printing problems." msgstr "Eksperimentinė funkcija: keičiant giją, ji įtraukiama ir nukerpama didesniu atstumu, kad būtų sumažintas jos pravalymo (purge) kiekis. Nors tai žymiai sumažina atliekų kiekį, gali padidėti purkštuko užsikimšimo ar kitų spausdinimo problemų rizika." msgid "Retraction distance when cut" msgstr "Įtraukimo atstumas, kai kerpama" msgid "Experimental feature: Retraction length before cutting off during filament change." msgstr "Eksperimentinė savybė: Įtraukimo ilgis prieš nupjaunant keičiant giją." msgid "Long retraction when extruder change" msgstr "Ilgas įtraukimas keičiant ekstruderį" msgid "Retraction distance when extruder change" msgstr "Įtraukimo atstumas keičiant ekstruderį" msgid "Z-hop height" msgstr "„Z-hop“ (pakėlimo) aukštis" msgid "Whenever there is a retraction, the nozzle is lifted a little to create clearance between the nozzle and the print. This prevents the nozzle from hitting the print when traveling more. Using spiral lines to lift z can prevent stringing." msgstr "Kaskart atliekant atitraukimą, purkštukas šiek tiek pakeliamas, kad tarp jo ir spaudinio atsirastų tarpas. Tai apsaugo nuo purkštuko užkliudymo už spaudinio judėjimo metu. „Spiralinių“ linijų naudojimas Z ašies kėlimui gali padėti išvengti „tįstančių siūlų“ (angl. \"stringing\")." msgid "Z-hop lower boundary" msgstr "Z-hop apatinė riba" msgid "Z-hop will only come into effect when Z is above this value and is below the parameter: \"Z-hop upper boundary\"." msgstr "Z-hop įsigalios tik tada, kai Z bus virš šios reikšmės ir žemiau parametro: „Z-hop viršutinė riba“." msgid "Z-hop upper boundary" msgstr "Z-hop viršutinė riba" msgid "If this value is positive, Z-hop will only come into effect when Z is above the parameter: \"Z-hop lower boundary\" and is below this value." msgstr "Jei ši reikšmė yra teigiama, Z-hop įsigalios tik tada, kai Z bus virš parametro „Z-hop apatinė riba“ ir žemiau šios reikšmės." msgid "Z-hop type" msgstr "Z-hop tipas" msgid "Type of Z-hop." msgstr "Z-hop tipas." msgid "Slope" msgstr "Nuolydis" msgid "Spiral" msgstr "Spiralė" msgid "Traveling angle" msgstr "Judėjimo kampas" msgid "Traveling angle for Slope and Spiral Z-hop type. Setting it to 90° results in Normal Lift." msgstr "Nuolydžio (Slope) ir spiralės (Spiral) Z-hop tipo judėjimo kampas. Nustačius 90°, gaunamas įprastas pakėlimas." msgid "Only lift Z above" msgstr "Pakelti Z tik virš" msgid "If you set this to a positive value, Z lift will only take place above the specified absolute Z." msgstr "Jei nustatysite teigiamą reikšmę, Z kėlimas bus vykdomas tik virš nurodytos absoliučiosios Z reikšmės." msgid "Only lift Z below" msgstr "Pakelti Z tik žemiau" msgid "If you set this to a positive value, Z lift will only take place below the specified absolute Z." msgstr "Jei nustatysite teigiamą reikšmę, Z kėlimas bus vykdomas tik žemiau nurodytos absoliučiosios Z reikšmės." msgid "On surfaces" msgstr "Ant paviršių" msgid "Enforce Z-Hop behavior. This setting is impacted by the above settings (Only lift Z above/below)." msgstr "Priverstinis Z-hop taikymas. Šiam nustatymui įtakos turi aukščiau esantys parametrai (Pakelti Z tik virš/žemiau)." msgid "All Surfaces" msgstr "Visi paviršiai" msgid "Top Only" msgstr "Tik viršus" msgid "Bottom Only" msgstr "Tik apačia" msgid "Top and Bottom" msgstr "Viršus ir apačia" msgid "Direct Drive" msgstr "Tiesioginė pavara (Direct Drive)" msgid "Bowden" msgstr "Bowdeno vamzdelis (Bowden)" # AI Translated msgid "Hybrid" msgstr "Hibridinis" msgid "Enable filament dynamic map" msgstr "Įjungti dinaminį gijų susiejimą" msgid "Enable dynamic filament mapping during print." msgstr "Įjungti dinaminį gijų susiejimą spausdinimo metu." msgid "Has filament switcher" msgstr "Turi gijos keitiklį" msgid "Printer has a filament switcher hardware (e.g., AMS)." msgstr "Spausdintuvas turi gijos keitimo įrangą (pvz., AMS)." msgid "Extra length on restart" msgstr "Papildomas ilgis po sugrąžinimo" msgid "When the retraction is compensated after the travel move, the extruder will push this additional amount of filament. This setting is rarely needed." msgstr "Kai po judėjimo kompensuojamas gijos įtraukimas, ekstruderis papildomai išstums šį gijos kiekį. Šis nustatymas reikalingas retai." msgid "When the retraction is compensated after changing tool, the extruder will push this additional amount of filament." msgstr "Kai po įrankio pakeitimo kompensuojamas gijos įtraukimas, ekstruderis papildomai išstums šį gijos kiekį." msgid "Retraction speed" msgstr "Atitraukimo greitis." msgid "Speed for retracting filament from the nozzle." msgstr "Gijos įtraukimo iš purkštuko greitis." msgid "Deretraction speed" msgstr "Atitraukimo panaikinimo greitis (angl. \"deretraction speed\")." msgid "Speed for reloading filament into the nozzle. Zero means same speed of retraction." msgstr "Gijos sugrąžinimo atgal į purkštuką greitis. Nulis reiškia tokį patį įtraukimo greitį." # AI Translated msgid "Deretraction speed (extruder change)" msgstr "Grąžinimo greitis (keičiant ekstruderį)" # AI Translated msgid "Speed for reloading filament into the nozzle when switching extruder." msgstr "Gijos įkėlimo į purkštuką greitis keičiant ekstruderį." msgid "Use firmware retraction" msgstr "Naudoti aparatinės programinės įrangos įtraukimą" msgid "This experimental setting uses G10 and G11 commands to have the firmware handle the retraction. This is only supported in recent Marlin." msgstr "Šis eksperimentinis nustatymas naudoja G10 ir G11 komandas, leidžiančias aparatinei programinei įrangai valdyti įtraukimą. Tai palaiko tik naujesnės „Marlin“ versijos." msgid "Show auto-calibration marks" msgstr "Rodyti automatinio kalibravimo ženklus" msgid "Disable set remaining print time" msgstr "Išjungti nustatytą likusį spausdinimo laiką" msgid "Disable generating of the M73: Set remaining print time in the final G-code." msgstr "Išjungti M73 komandos (likusio spausdinimo laiko nustatymo) generavimą galutiniame G-kode." msgid "Seam position" msgstr "Siūlės padėtis" msgid "This is the starting position for each part of the outer wall." msgstr "Tai yra pradinė pozicija kiekvienai išorinės sienelės daliai." msgid "Nearest" msgstr "Artimiausia" msgid "Aligned" msgstr "Sulygiuota" msgid "Aligned back" msgstr "Sulygiuota gale" msgid "Back" msgstr "Atgal" msgid "Random" msgstr "Atsitiktinė" msgid "Staggered inner seams" msgstr "Išmėtytos vidinės siūlės" msgid "This option causes the inner seams to be shifted backwards based on their depth, forming a zigzag pattern." msgstr "Pasirinkus šią parinktį, vidinės siūlės yra paslenkamos atgal pagal jų gylį, taip suformuojant zigzago raštą." msgid "Seam gap" msgstr "Siūlės tarpas" msgid "" "In order to reduce the visibility of the seam in a closed loop extrusion, the loop is interrupted and shortened by a specified amount.\n" "This amount can be specified in millimeters or as a percentage of the current extruder diameter. The default value for this parameter is 10%." msgstr "" "Siekiant sumažinti uždaros kilpos ekstruzijos siūlės matomumą, kilpa pertraukiama ir sutrumpinama tam tikru dydžiu.\n" "Šį kiekį galima nurodyti milimetrais arba procentais nuo esamo ekstruderio skersmens. Numatytoji šio parametro vertė yra 10 %." msgid "Scarf joint seam (beta)" msgstr "Įstrižoji jungiamoji siūlė (Scarf joint) (beta)" msgid "Use scarf joint to minimize seam visibility and increase seam strength." msgstr "Naudoti įstrižąją jungtį (Scarf joint), kad siūlė būtų kuo mažiau matoma ir padidėtų jos tvirtumas." msgid "Conditional scarf joint" msgstr "Sąlyginė įstrižoji jungtis (Scarf joint)" msgid "Apply scarf joints only to smooth perimeters where traditional seams do not conceal the seams at sharp corners effectively." msgstr "Taikyti įstrižąsias jungtis (Scarf joint) tik ties lygiais perimetrais, kur įprastos siūlės negali būti efektyviai paslėptos aštriuose kampuose." msgid "Conditional angle threshold" msgstr "Sąlyginė kampo ribinė reikšmė" msgid "" "This option sets the threshold angle for applying a conditional scarf joint seam.\n" "If the maximum angle within the perimeter loop exceeds this value (indicating the absence of sharp corners), a scarf joint seam will be used. The default value is 155°." msgstr "" "Ši parinktis nustato ribinį kampą sąlyginės įstrižosios siūlės taikymui.\n" "Jei didžiausias kampas perimetro kilpoje viršija šią reikšmę (tai rodo, kad nėra aštrių kampų), bus naudojama įstrižoji jungiamoji siūlė (Scarf joint). Numatytoji reikšmė yra 155°." msgid "Conditional overhang threshold" msgstr "Sąlyginė iškyšos (overhang) ribinė reikšmė" #, no-c-format, no-boost-format msgid "This option determines the overhang threshold for the application of scarf joint seams. If the unsupported portion of the perimeter is less than this threshold, scarf joint seams will be applied. The default threshold is set at 40% of the external wall's width. Due to performance considerations, the degree of overhang is estimated." msgstr "Ši parinktis nustato iškyšos (overhang) ribinę reikšmę įstrižųjų jungiamųjų siūlių taikymui. Jei neatremta perimetro dalis yra mažesnė už šią ribą, bus naudojamos įstrižosios jungiamosios siūlės (Scarf joint). Numatytoji riba yra 40 % išorinės sienelės pločio. Dėl programos našumo iškyšos laipsnis yra apytikslis." msgid "Scarf joint speed" msgstr "Įstrižosios jungties (Scarf joint) greitis" msgid "This option sets the printing speed for scarf joints. It is recommended to print scarf joints at a slow speed (less than 100 mm/s). It's also advisable to enable 'Extrusion rate smoothing' if the set speed varies significantly from the speed of the outer or inner walls. If the speed specified here is higher than the speed of the outer or inner walls, the printer will default to the slower of the two speeds. When specified as a percentage (e.g., 80%), the speed is calculated based on the respective outer or inner wall speed. The default value is set to 100%." msgstr "Ši parinktis nustato įstrižųjų jungčių (Scarf joint) spausdinimo greitį. Rekomenduojama jas spausdinti nedideliu greičiu (mažiau nei 100 mm/s). Taip pat patartina įjungti ekstruzijos srauto išlyginimą, jei nustatytas greitis stipriai skiriasi nuo išorinių ar vidinių sienelių greičio. Jei čia nurodytas greitis yra didesnis už išorinių ar vidinių sienelių greitį, spausdintuvas automatiškai parinks lėtesnį iš šių dviejų greičių. Nurodžius procentais (pvz., 80 %), greitis apskaičiuojamas pagal atitinkamos išorinės arba vidinės sienelės greitį. Numatytoji reikšmė yra 100 %." msgid "Scarf joint flow ratio" msgstr "Įstrižosios jungties (Scarf joint) srauto koeficientas" msgid "This factor affects the amount of material for scarf joints." msgstr "Šis koeficientas keičia medžiagos kiekį, naudojamą įstrižosioms jungtims (Scarf joint)." msgid "Scarf start height" msgstr "Įstrižosios jungties pradžios aukštis" msgid "" "Start height of the scarf.\n" "This amount can be specified in millimeters or as a percentage of the current layer height. The default value for this parameter is 0." msgstr "" "Įstrižosios jungties pradžios aukštis.\n" "Šį dydį galima nurodyti milimetrais arba esamo sluoksnio aukščio procentais. Numatytoji šio parametro reikšmė yra 0." msgid "Scarf around entire wall" msgstr "Įstrižoji jungtis aplink visą sienelę" msgid "The scarf extends to the entire length of the wall." msgstr "Įstrižoji jungtis tęsiasi per visą sienelės ilgį." msgid "Scarf length" msgstr "Įstrižosios jungties ilgis" msgid "Length of the scarf. Setting this parameter to zero effectively disables the scarf." msgstr "Įstrižosios jungties ilgis. Nustačius šį parametrą ties nuliu, įstrižoji jungtis išjungiama." msgid "Scarf steps" msgstr "Įstrižosios jungties žingsniai" msgid "Minimum number of segments of each scarf." msgstr "Mažiausias kiekvienos įstrižosios jungties segmentų skaičius." msgid "Scarf joint for inner walls" msgstr "Įstrižoji jungtis (Scarf joint) vidinėms sienelėms" msgid "Use scarf joint for inner walls as well." msgstr "Įstrižąją jungtį (Scarf joint) naudoti ir vidinėms sienelėms." msgid "Role base wipe speed" msgstr "Valymo greitis pagal elemento tipą" msgid "The wipe speed is determined by the speed of the current extrusion role. e.g. if a wipe action is executed immediately following an outer wall extrusion, the speed of the outer wall extrusion will be utilized for the wipe action." msgstr "Valymo greitį lemia esamo išspaudimo elemento tipas. Pvz., jei valymo veiksmas atliekamas iškart po išorinės sienelės išspaudimo, valymui bus naudojamas išorinės sienelės spausdinimo greitis." msgid "Wipe on loops" msgstr "Nuvalyti kilpas" msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop." msgstr "Siekiant sumažinti siūlės matomumą uždaroje ekstruzijos kilpoje, prieš ekstruderiui išeinant iš kilpos atliekamas nedidelis judesys į vidų." msgid "Wipe before external loop" msgstr "Valymas prieš išorinį kontūrą" msgid "" "To minimize visibility of potential overextrusion at the start of an external perimeter when printing with Outer/Inner or Inner/Outer/Inner wall print order, the de-retraction is performed slightly on the inside from the start of the external perimeter. That way any potential over extrusion is hidden from the outside surface.\n" "\n" "This is useful when printing with Outer/Inner or Inner/Outer/Inner wall print order as in these modes it is more likely an external perimeter is printed immediately after a de-retraction move." msgstr "" "Siekiant sumažinti galimo medžiagos pertekliaus (overextrusion) matomumą išorinio perimetro pradžioje, kai naudojama „Išorinė/Vidinė“ arba „Vidinė/Išorinė/Vidinė“ sienelių spausdinimo tvarka, gijos sugrąžinimas atliekamas šiek tiek labiau į vidų nuo išorinio perimetro pradžios. Taip bet koks galimas medžiagos perteklius paslepiamas vidinėje paviršiaus pusėje.\n" "\n" "Tai naudinga spausdinant „Išorinė/Vidinė“ arba „Vidinė/Išorinė/Vidinė“ sienelių tvarka, nes šiuose režimuose išorinis perimetras dažniausiai pradedamas spausdinti iškart po gijos sugrąžinimo judesio." msgid "Wipe speed" msgstr "Gijos valymo greitis" msgid "The wipe speed is determined by the speed setting specified in this configuration. If the value is expressed as a percentage (e.g. 80%), it will be calculated based on the travel speed setting above. The default value for this parameter is 80%." msgstr "Valymo greitis nustatomas pagal šioje konfigūracijoje nurodytą reikšmę. Jei reikšmė nurodyta procentais (pvz., 80%), ji bus apskaičiuojama pagal aukščiau nustatytą judėjimo (travel) greitį. Numatytoji šio parametro reikšmė yra 80%." msgid "Skirt distance" msgstr "Apvado atstumas" msgid "This is the distance from the skirt to the brim or the object." msgstr "Tai yra atstumas nuo kontūro linijos (angl. \"skirt\") iki krašto (angl. \"brim\") arba objekto." msgid "Skirt start point" msgstr "Apvado pradžios taškas" msgid "Angle from the object center to skirt start point. Zero is the most right position, counter clockwise is positive angle." msgstr "Kampas nuo objekto centro iki apvado pradžios taško. Nulis yra labiausiai į dešinę nukreipta padėtis, prieš laikrodžio rodyklę - teigiamas kampas." msgid "Skirt height" msgstr "Apvado aukštis" msgid "Number of skirt layers: usually only one" msgstr "Kontūro linijų sluoksnių skaičius (angl. \"skirt layers\"): paprastai tik vienas." msgid "Single loop after first layer" msgstr "Vienas kontūro sluoksnis po pirmojo sluoksnio" msgid "Limits the skirt/draft shield loops to one wall after the first layer. This is useful, on occasion, to conserve filament but may cause the draft shield/skirt to warp / crack." msgstr "Po pirmojo sluoksnio apriboja apvado / apsauginio skydo kontūrus iki vienos sienelės. Tai kartais naudinga norint sutaupyti gijos, tačiau apsauginis skydas ar apvadas gali labiau deformuotis arba įtrūkti." msgid "Draft shield" msgstr "Apsauginis skydas (Draft shield)" msgid "" "A draft shield is useful to protect an ABS or ASA print from warping and detaching from print bed due to wind draft. It is usually needed only with open frame printers, i.e. without an enclosure.\n" "\n" "Enabled = skirt is as tall as the highest printed object. Otherwise 'Skirt height' is used.\n" "Note: With the draft shield active, the skirt will be printed at skirt distance from the object. Therefore, if brims are active it may intersect with them. To avoid this, increase the skirt distance value.\n" msgstr "" "Apsauginis skydas (Draft shield) padeda apsaugoti ABS arba ASA spaudinius nuo deformavimosi ir atšokimo nuo pagrindo dėl skersvėjų. Dažniausiai jis reikalingas tik atviro tipo spausdintuvams be korpuso (enclosure).\n" "\n" "Įjungta = apvadas bus tokio paties aukščio kaip ir aukščiausias spausdinamas objektas. Priešingu atveju naudojamas parametras „Apvado aukštis“.\n" "Pastaba: kai apsauginis skydas aktyvus, apvadas bus spausdinamas nurodytu „Apvado atstumu“ nuo objekto. Jei naudojami pado kraštai (brim), jie gali susikirsti. Norėdami to išvengti, padidinkite apvado atstumo reikšmę.\n" msgid "Enabled" msgstr "Įjungta" msgid "Skirt type" msgstr "Apvado tipas" msgid "Combined - single skirt for all objects, Per object - individual object skirt." msgstr "Kombinuotas – vienas bendras apvadas visiems objektams; Kiekvienam objektui – atskiras apvadas kiekvienam spaudiniui." msgid "Per object" msgstr "Objektui" msgid "Skirt loops" msgstr "Apvado kontūrai" msgid "This is the number of loops for the skirt. 0 means the skirt is disabled." msgstr "Tai yra kontūro linijos (angl. \"skirt\") kilpų skaičius. 0 reiškia, kad kontūro linija išjungta." msgid "Skirt speed" msgstr "Apvado greitis" msgid "Speed of skirt, in mm/s. Zero means use default layer extrusion speed." msgstr "Apvado greitis, mm/s. Nulis reiškia, kad naudojamas numatytasis sluoksnio išspaudimo greitis." msgid "Skirt minimum extrusion length" msgstr "Minimalus apvado išspaudimo ilgis" msgid "" "Minimum filament extrusion length in mm when printing the skirt. Zero means this feature is disabled.\n" "\n" "Using a non-zero value is useful if the printer is set up to print without a prime line.\n" "Final number of loops is not taking into account while arranging or validating objects distance. Increase loop number in such case." msgstr "" "Mažiausias gijos išspaudimo ilgis mm, kai spausdinamas apvadas. Nulis reiškia, kad ši funkcija išjungta.\n" "\n" "Naudoti nenulinę vertę naudinga, jei spausdintuvas nustatytas spausdinti be pirminės linijos.\n" "Į galutinį kontūrų skaičių neatsižvelgiama, kai organizuojamas arba patvirtinamas objektų atstumas. Tokiu atveju padidinkite kontūrų skaičių." msgid "The printing speed in exported G-code will be slowed down when the estimated layer time is shorter than this value in order to get better cooling for these layers." msgstr "Spausdinimo greitis eksportuotame G-kode bus sulėtintas, kai numatomas sluoksnio laikas bus trumpesnis už šią vertę, siekiant užtikrinti geresnį šių sluoksnių aušinimą." msgid "Minimum sparse infill threshold" msgstr "Minimali reto užpildo ribinė reikšmė" msgid "Sparse infill areas which are smaller than this threshold value are replaced by internal solid infill." msgstr "Reto užpildo sritys, kurios yra mažesnės už šią ribinę vertę, yra pakeičiamos vidiniu vientisu užpildu." msgid "" "Filament to print internal solid infill.\n" "\"Default\" uses the active object/part filament." msgstr "" "Gija, naudojama vidiniam vientisam užpildui spausdinti.\n" "Pasirinkus „Numatytoji“, naudojama aktyvaus objekto / dalies gija." msgid "" "Filament to print top surface.\n" "\"Default\" uses the active object/part filament." msgstr "" "Gija, naudojama viršutiniam paviršiui spausdinti.\n" "Pasirinkus „Numatytoji“, naudojama aktyvaus objekto / dalies gija." msgid "" "Filament to print bottom surface.\n" "\"Default\" uses the active object/part filament." msgstr "" "Gija, naudojama apatiniam paviršiui spausdinti.\n" "Pasirinkus „Numatytoji“, naudojama aktyvaus objekto / dalies gija." msgid "Line width of internal solid infill. If expressed as a %, it will be computed over the nozzle diameter." msgstr "Vidinio vientiso užpildo linijos plotis. Jei išreiškiamas %, jis apskaičiuojamas pagal purkštuko skersmenį." msgid "This is the speed for internal solid infill, not including the top or bottom surface." msgstr "Tai yra vidinio vientiso užpildo greitis, neįskaitant viršutinio ar apatinio paviršiaus." msgid "This enables spiraling, which smooths out the Z moves of the outer contour and turns a solid model into a single walled print with solid bottom layers. The final generated model has no seam." msgstr "Tai įjungia spiralinį spausdinimą (angl. \"spiralize\"), kuris sušvelnina išorinio kontūro Z ašies judesius ir paverčia vientisą modelį vienasienio korpuso spaudiniu su vientisais apatiniais sluoksniais. Galutiniame sugeneruotame modelyje nėra sujungimo siūlių (angl. \"seam\")." msgid "Smooth Spiral" msgstr "Sklandi spiralė" msgid "Smooth Spiral smooths out X and Y moves as well, resulting in no visible seam at all, even in the XY directions on walls that are not vertical." msgstr "Sklandi spiralė papildomai išlygina X ir Y judesius, todėl XY kryptimis ant nevertikalių sienelių siūlė tampa visiškai nematoma." msgid "Max XY Smoothing" msgstr "Maksimalus XY išlyginimas" #, no-c-format, no-boost-format msgid "Maximum distance to move points in XY to try to achieve a smooth spiral. If expressed as a %, it will be computed over nozzle diameter." msgstr "Maksimalus atstumas, kuriuo galima pastumti taškus XY plokštumoje, siekiant sklandžios spiralės. Jei nurodoma %, reikšmė apskaičiuojama pagal purkštuko skersmenį." msgid "Spiral starting flow ratio" msgstr "Spiralės pradinis srauto koeficientas" #, no-c-format, no-boost-format msgid "Sets the starting flow ratio while transitioning from the last bottom layer to the spiral. Normally the spiral transition scales the flow ratio from 0% to 100% during the first loop which can in some cases lead to under extrusion at the start of the spiral." msgstr "Nustato pradinį srauto koeficientą perėjimo iš paskutinio apatinio sluoksnio į spiralę metu. Paprastai perėjimo į spiralę metu srauto koeficientas pirmojo kontūro metu didėja nuo 0% iki 100%, todėl kai kuriais atvejais spiralės pradžioje gali pritrūkti medžiagos (under-extrusion)." msgid "Spiral finishing flow ratio" msgstr "Spiralės pabaigos srauto koeficientas" #, no-c-format, no-boost-format msgid "Sets the finishing flow ratio while ending the spiral. Normally the spiral transition scales the flow ratio from 100% to 0% during the last loop which can in some cases lead to under extrusion at the end of the spiral." msgstr "Nustato baigiamąjį srauto koeficientą užbaigiant spiralę. Paprastai šio perėjimo metu srauto koeficientas paskutinio kontūro metu mažėja nuo 100% iki 0%, todėl kai kuriais atvejais spiralės pabaigoje gali pritrūkti medžiagos (under-extrusion)." msgid "If smooth or traditional mode is selected, a timelapse video will be generated for each print. After each layer is printed, a snapshot is taken with the chamber camera. All of these snapshots are composed into a timelapse video when printing completes. If smooth mode is selected, the toolhead will move to the excess chute after each layer is printed and then take a snapshot. Since the melt filament may leak from the nozzle during the process of taking a snapshot, a prime tower is required for smooth mode to wipe the nozzle." msgstr "Jei pasirinktas sklandus (\"smooth\") arba tradicinis (\"traditional\") režimas, kiekvienam spaudiniui bus sugeneruotas laiko intervalo (\"timelapse\") vaizdo įrašas. Po kiekvieno atspausdinto sluoksnio fotoaparatas užfiksuoja kadrą. Pasibaigus spausdinimui, visi šie kadrai sujungiami į vaizdo įrašą. Jei pasirinktas sklandus režimas, po kiekvieno atspausdinto sluoksnio įrankio galvutė pasislinks prie atliekų latako (angl. \"excess chute\") ir tada bus užfiksuotas kadras. Kadangi kadrų fiksavimo metu iš purkštuko gali pratekėti išlydytas siūlas, sklandžiam režimui būtinas paruošiamasis bokštelis (angl. \"prime tower\") purkštukui nuvalyti." msgid "Traditional" msgstr "Tradicinis" msgid "Smooth" msgstr "Glotnus" # AI Translated msgid "Farthest point timelapse" msgstr "Tolimiausio taško intervalinis fotografavimas" # AI Translated msgid "When enabled, the timelapse snapshot is taken at the farthest point from camera instead of traveling to the wipe tower or excess chute. Only effective in traditional timelapse mode on non-I3 printers." msgstr "Kai įjungta, intervalinio fotografavimo kadras daromas tolimiausiame taške nuo kameros, o ne nuvažiuojant prie valymo bokšto ar pertekliaus latako. Veikia tik tradiciniame intervalinio fotografavimo režime ne I3 spausdintuvuose." msgid "Temperature variation" msgstr "Temperatūros kitimas" #. TRN PrintSettings : "Ooze prevention" > "Temperature variation" msgid "Temperature difference to be applied when an extruder is not active. The value is not used when 'idle_temperature' in filament settings is set to non-zero value." msgstr "Temperatūros skirtumas, taikomas, kai ekstruderis yra neaktyvus. Ši reikšmė nenaudojama, kai gijos nustatymuose „idle_temperature“ (pasyvaus režimo temperatūra) yra nustatyta ne nuliui." msgid "∆℃" msgstr "∆℃" msgid "Preheat time" msgstr "Įkaitinimo laikas" msgid "To reduce the waiting time after tool change, Orca can preheat the next tool while the current tool is still in use. This setting specifies the time in seconds to preheat the next tool. Orca will insert a M104 command to preheat the tool in advance." msgstr "Kad sutrumpėtų laukimo laikas pakeitus įrankį, Orca gali iš anksto įkaitinti kitą įrankį, kol dabartinis įrankis dar naudojamas. Šis nustatymas nurodo kito įrankio įkaitinimo laiką sekundėmis. Orca įterps komandą M104, kad įrankis būtų įkaitintas iš anksto." msgid "Preheat steps" msgstr "Įkaitinimo etapai" msgid "Insert multiple preheat commands (e.g. M104.1). Only useful for Prusa XL. For other printers, please set it to 1." msgstr "Įterpkite kelias įkaitinimo komandas (pvz., M104.1). Naudinga tik „Prusa XL“. Kitiems spausdintuvams nustatykite 1." msgid "G-code written at the very top of the output file, before any other content. Useful for adding metadata that printer firmware reads from the first lines of the file (e.g. estimated print time, filament usage). Supports placeholders like {print_time_sec} and {used_filament_length}." msgstr "G-kodas, įrašomas pačiame išvesties failo viršuje, prieš bet kokį kitą turinį. Naudingas įterpti metaduomenims, kuriuos spausdintuvo aparatinė programinė įranga nuskaito iš pirmųjų failo eilučių (pvz., numatomą spausdinimo laiką, gijos sąnaudas). Palaiko kintamuosius (placeholders), tokius kaip {print_time_sec} ir {used_filament_length}." msgid "Start G-code" msgstr "Pradžios G-kodas" msgid "G-code added when starting a print." msgstr "G-kodas, pridedamas pradedant spausdinimą." msgid "G-code added when the printer starts using this filament" msgstr "G-kodas, pridedamas spausdintuvui pradedant naudoti šią giją." msgid "Single Extruder Multi Material" msgstr "Vieno ekstruderio daugiamedžiagis spausdinimas (Multi-Material)" msgid "Use single nozzle to print multi filament." msgstr "Naudoti vieną purkštuką spausdinimui keliomis gijomis." msgid "Manual Filament Change" msgstr "Rankinis gijų keitimas" msgid "Enable this option to omit the custom Change filament G-code only at the beginning of the print. The tool change command (e.g., T0) will be skipped throughout the entire print. This is useful for manual multi-material printing, where we use M600/PAUSE to trigger the manual filament change action." msgstr "Įjunkite šią parinktį, kad pasirinktinis gijos keitimo G-kodas būtų praleistas tik spausdinimo pradžioje. Įrankio keitimo komanda (pvz., T0) bus praleidžiama viso spausdinimo metu. Tai naudinga rankiniam daugiamedžiagiam spausdinimui, kai rankiniam gijos keitimui inicijuoti naudojama M600 / PAUSE komanda." msgid "Wipe tower type" msgstr "Valymo bokšto tipas" msgid "Choose the wipe tower implementation for multi-material prints. Type 1 is recommended for Bambu and Qidi printers with a filament cutter. Type 2 offers better compatibility with multi-tool and MMU printers and provide overall better compatibility." msgstr "Pasirinkite valymo bokšto tipą daugiamedžiagiam spausdinimui. 1 tipas rekomenduojamas „Bambu“ ir „Qidi“ spausdintuvams su gijos kirpikliu. 2 tipas užtikrina geresnį suderinamumą su kelių galvučių (multi-tool) bei MMU spausdintuvais ir bendrai pasižymi platesniu suderinamumu." msgid "Type 1" msgstr "1 tipas" msgid "Type 2" msgstr "2 tipas" msgid "Purge in prime tower" msgstr "Medžiagos išvalymas valymo bokštelyje" msgid "Purge remaining filament into prime tower." msgstr "Išvalyti likusios gijos likučius valymo bokštelyje." msgid "Enable filament ramming" msgstr "Įjungti gijos sutankinimą (filament ramming)" msgid "Tool change on wipe tower" msgstr "Įrankio keitimas virš valymo bokšto" msgid "Force the toolhead to travel to the wipe tower before issuing the tool change command (Tx). Only relevant for multi-extruder (multi-toolhead) printers using a Type 2 wipe tower. By default Orca skips the travel on multi-toolhead machines because the firmware handles the head swap, which can result in the Tx command being issued above the printed part. Enable this option if you want the tool change to always be issued above the wipe tower instead." msgstr "Priverstinai nukreipti spausdinimo galvutę prie valymo bokšto prieš vykdant įrankio keitimo komandą (Tx). Aktualu tik spausdintuvams su keliais ekstruderiais (keliomis galvutėmis), naudojantiems 2 tipo valymo bokštą. Pagal numatytuosius nustatymus „OrcaSlicer“ praleidžia šį judesį kelių galvučių įrenginiuose, nes galvučių sukeitimą valdo aparatinė programinė įranga, todėl Tx komanda gali būti įvykdyta virš spausdinamos detalės. Įjunkite šią parinktį, jei norite, kad įrankio keitimas visada vyktų virš valymo bokšto." msgid "No sparse layers (beta)" msgstr "Nėra retų sluoksnių (beta)" msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." msgstr "Jei įjungta, valymo bokštas nebus spausdinamas tuose sluoksniuose, kur įrankis nekeičiamas. Sluoksniuose, kur įrankis keičiamas, ekstruderis nusileis žemyn atspausdinti valymo bokšto dalies. Naudotojas pats atsako už tai, kad ekstruderis nesusidurtų su spaudiniu." msgid "Prime all printing extruders" msgstr "Paruošti (prime) visus spausdinimo ekstruderius" msgid "If enabled, all printing extruders will be primed at the front edge of the print bed at the start of the print." msgstr "Jei įjungta, visi spausdinimo ekstruderiai spausdinimo pradžioje bus paruošti (primed) prie priekinio spausdinimo pagrindo krašto." # AI Translated msgid "Toolchange ordering" msgstr "Įrankių keitimo tvarka" # AI Translated msgid "" "Determines the order of tool changes on each layer.\n" "- Default: Starts with the last used extruder to minimize tool changes.\n" "- Cyclic: Uses a fixed tool sequence each layer. This sacrifices speed for better surface quality, as the extra toolchanges allow layers more time to cool." msgstr "" "Nustato įrankių keitimų tvarką kiekviename sluoksnyje.\n" "- Numatytoji: prasideda paskutiniu naudotu ekstruderiu, kad būtų sumažintas įrankių keitimų skaičius.\n" "- Ciklinė: kiekviename sluoksnyje naudoja fiksuotą įrankių seką. Tai aukoja greitį geresnės paviršiaus kokybės labui, nes papildomi įrankių keitimai suteikia sluoksniams daugiau laiko atvėsti." # AI Translated msgid "Cyclic" msgstr "Ciklinė" msgid "Slice gap closing radius" msgstr "Sluoksniavimo tarpo uždarymo spindulys" msgid "Cracks smaller than 2x gap closing radius are being filled during the triangle mesh slicing. The gap closing operation may reduce the final print resolution, therefore it is advisable to keep the value reasonably low." msgstr "Plyšiai, mažesni nei 2x tarpo uždarymo spindulys, užpildomi trikampio figūros sluoksniavimo metu. Tarpo uždarymo operacija gali sumažinti galutinę spausdinimo skiriamąją gebą, todėl patartina išlaikyti pakankamai žemą reikšmę." msgid "Slicing Mode" msgstr "Sluoksniavimo režimas" msgid "Other" msgstr "Kita" msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model." msgstr "„3DLabPrint“ lėktuvų modeliams naudokite „Lyginis-nelyginis“. Naudokite „Uždaryti kiaurymes“, kad uždarytumėte visas modelio kiaurymes." msgid "Regular" msgstr "Įprastas" msgid "Even-odd" msgstr "Lyginis-nelyginis" msgid "Close holes" msgstr "Uždaryti kiaurymes" msgid "Z offset" msgstr "Z poslinkis" msgid "This value will be added (or subtracted) from all the Z coordinates in the output G-code. It is used to compensate for bad Z endstop position: for example, if your endstop zero actually leaves the nozzle 0.3mm far from the print bed, set this to -0.3 (or fix your endstop)." msgstr "Ši vertė bus pridėta (arba atimta) prie visų išvesties G kodo Z koordinačių. Ji naudojama blogai Z galinio ribotuvo padėčiai kompensuoti: pavyzdžiui, jei jūsų nulinis ribotuvas iš tikrųjų palieka purkštuką 0,3 mm atstumu nuo spausdinimo pagrindo, nustatykite šią reikšmę -0,3 (arba pataisykite galinį ribotuvą)." msgid "Enable support" msgstr "Įgalinti atramas" msgid "This enables support generation." msgstr "Tai įgalina atramų generavimą." msgid "Normal (auto) and Tree (auto) are used to generate support automatically. If Normal (manual) or Tree (manual) is selected, only support enforcers are generated." msgstr "Režimai „Įprastas (auto)“ ir „Medis (auto)“ naudojami automatiškai generuoti atramas. Jei pasirinkta „Įprastas (rankinis)“ arba „Medis (rankinis)“, atramos bus generuojamos tik nurodytose priverstinėse vietose (support enforcers)." msgid "Normal (auto)" msgstr "Įprastas (auto)" msgid "Tree (auto)" msgstr "Medis (auto)" msgid "Normal (manual)" msgstr "Įprastas (rankinis)" msgid "Tree (manual)" msgstr "Medis (rankinis)" msgid "Support/object XY distance" msgstr "Atramos/objekto XY atstumas" msgid "This controls the XY separation between an object and its support." msgstr "Tai reguliuoja XY ašies atstumą tarp objekto ir jo atramos." msgid "Support/object first layer gap" msgstr "Atramos ir objekto pirmojo sluoksnio tarpas" msgid "XY separation between an object and its support at the first layer." msgstr "XY atstumas tarp objekto ir jo atramos pirmajame sluoksnyje." msgid "Pattern angle" msgstr "Rašto kampas" msgid "Use this setting to rotate the support pattern on the horizontal plane." msgstr "Naudokite šį nustatymą, kad pasuktumėte atramų raštą horizontalioje plokštumoje." msgid "On build plate only" msgstr "Tik ant pagrindo plokštės" msgid "This setting only generates supports that begin on the build plate." msgstr "Šis nustatymas generuoja tik tas atramas, kurios prasideda nuo spausdinimo pagrindo." msgid "Support critical regions only" msgstr "Paremti tik kritines sritis" msgid "Only create support for critical regions including sharp tail, cantilever, etc." msgstr "Atramas kurkite tik kritinėse srityse, įskaitant aštrų galą, konsolę ir pan." msgid "Ignore small overhangs" msgstr "Ignoruoti mažas iškyšas" msgid "Ignore small overhangs that possibly don't require support." msgstr "Ignoruoti mažas iškyšas (overhangs), kurioms greičiausiai nereikia atramų." msgid "Top Z distance" msgstr "Viršutinis Z atstumas" msgid "Z gap between the support's top and object." msgstr "Z tarpas tarp atramos viršaus ir objekto." msgid "Bottom Z distance" msgstr "Apatinis Z atstumas" msgid "Z gap between the object and the support bottom. If Support Top Z Distance is 0 and the bottom has interface layers, this value is ignored and the support is printed in direct contact with the object (no gap)." msgstr "Z tarpas tarp objekto ir atramos apačios. Jei viršutinis atramos Z atstumas yra 0 ir apačioje yra sąsajos sluoksniai, ši reikšmė ignoruojama ir atrama spausdinama tiesiogiai kontaktuojant su objektu (be tarpo)." msgid "Support/raft base" msgstr "Atraminis ir (arba) platformos pagrindas" msgid "" "Filament to print support base and raft.\n" "\"Default\" means no specific filament for support and current filament is used." msgstr "" "Gija, naudojama atramų pagrindui ir padui (raft) spausdinti.\n" "Pasirinkus „Numatytoji“, speciali gija atramoms nenaudojama ir imama šiuo metu aktyvi gija." msgid "Avoid interface filament for base" msgstr "Nenaudoti sąsajos gijos pagrindui" msgid "Avoid using support interface filament to print support base if possible." msgstr "Jei įmanoma, nenaudoti atramų sąsajos (interface) gijos atramų pagrindui spausdinti." msgid "Line width of support. If expressed as a %, it will be computed over the nozzle diameter." msgstr "Atramos linijos plotis. Jei išreiškiamas %, jis apskaičiuojamas pagal purkštuko skersmenį." msgid "Loop pattern interface" msgstr "Kilpos modelio sąsaja." msgid "This covers the top contact layer of the supports with loops. It is disabled by default." msgstr "Tai uždengia viršutinį atramų kontaktinį sluoksnį kilpomis. Pagal numatytuosius nustatymus ši funkcija yra išjungta." msgid "Support/raft interface" msgstr "Atramų ir (arba) platformos sąsaja" msgid "" "Filament to print support interface.\n" "\"Default\" means no specific filament for support interface and current filament is used." msgstr "" "Gija, naudojama atramų sąsajai spausdinti.\n" "Pasirinkus „Numatytoji“, speciali gija atramų sąsajai nenaudojama ir imama šiuo metu aktyvi gija." msgid "Top interface layers" msgstr "Viršutiniai sąsajos sluoksniai" msgid "This is the number of top interface layers." msgstr "Tai viršutinių sąsajos sluoksnių skaičius." msgid "Bottom interface layers" msgstr "Apatiniai sąsajos sluoksniai" msgid "Number of bottom interface layers." msgstr "Apatinių sąsajos sluoksnių skaičius." msgid "Same as top" msgstr "Tas pats kaip ir viršuje" msgid "Top interface spacing" msgstr "Viršutinės sąsajos tarpas" msgid "" "Spacing of interface lines. Zero means solid interface.\n" "Force using solid interface when support ironing is enabled." msgstr "" "Tarpai tarp sąsajos linijų. Nulis reiškia vientisą (solid) sąsają.\n" "Vientisa sąsaja naudojama priverstinai, kai įjungtas atramų lyginimas (ironing)." msgid "Bottom interface spacing" msgstr "Apatinės sąsajos tarpas" msgid "This is the spacing of bottom interface lines. 0 means solid interface." msgstr "Tai yra apatinių sąsajos linijų tarpas. 0 reiškia vientisą sąsają." msgid "This is the speed for support interfaces." msgstr "Tai yra atramų sąsajų greitis." msgid "Base pattern" msgstr "Atramų pagrindo raštas" msgid "" "Line pattern of support.\n" "\n" "The Default option for Tree supports is Hollow, which means no base pattern. For other support types, the Default option is the Rectilinear pattern.\n" "\n" "NOTE: For Organic supports, the two walls are supported only with the Hollow/Default base pattern. The Lightning base pattern is supported only by Tree Slim/Strong/Hybrid supports. For the other support types, the Rectilinear will be used instead of Lightning." msgstr "" "Atramų linijų raštas.\n" "\n" "Numatytasis pasirinkimas medinėms (Tree) atramoms yra „Tuščiaviduris“ (Hollow), kas reiškia, jog pagrindo raštas nenaudojamas. Kitiems atramų tipams numatytasis pasirinkimas yra tiesiaeigis (Rectilinear) raštas.\n" "\n" "PASTABA: organinėms (Organic) atramoms abi sienelės palaikomos tik naudojant „Tuščiavidurį / Numatytąjį“ pagrindo raštą. „Žaibo“ (Lightning) pagrindo raštą palaiko tik „Tree Slim / Strong / Hybrid“ atramos. Kitiems atramų tipams vietoj „Žaibo“ rašto bus naudojamas tiesiaeigis (Rectilinear)." msgid "Rectilinear grid" msgstr "Tiesus tinklelis" msgid "Hollow" msgstr "Tuščiaviduris" msgid "Interface pattern" msgstr "Sąsajos raštas" msgid "This is the line pattern for support interfaces. The default pattern for non-soluble support interfaces is Rectilinear while the default pattern for soluble support interfaces is Concentric." msgstr "Tai yra atramų sąsajų linijų modelis. Pagal numatytuosius nustatymus netirpiai atramų sąsajai naudojamas tiesinis (\"Rectilinear\") modelis, o tirpiai atramų sąsajai – koncentrinis (\"Concentric\") modelis." msgid "Rectilinear Interlaced" msgstr "Tiesiaeigis persipynęs (Rectilinear Interlaced)" msgid "Base pattern spacing" msgstr "Pagrindinio rašto tarpai" msgid "This determines the spacing between support lines." msgstr "Tai nustato atramų linijų tarpus." msgid "Normal support expansion" msgstr "Įprastas atramų išplėtimas." msgid "Expand (+) or shrink (-) the horizontal span of normal support." msgstr "Išplėsti (+) arba susiaurinti (-) įprastų atramų horizontalųjį plotą." msgid "This is the speed for support." msgstr "Tai yra atramų spausdinimo greitis." msgid "" "Style and shape of the support. For normal support, projecting the supports into a regular grid will create more stable supports (default), while snug support towers will save material and reduce object scarring.\n" "For tree support, slim and organic style will merge branches more aggressively and save a lot of material (default organic), while hybrid style will create similar structure to normal support under large flat overhangs." msgstr "" "Atramų stilius ir forma. Naudojant įprastas atramas, jų projektavimas į reguliarų tinklelį sukuria stabilesnes struktūras (numatytasis nustatymas), o prigludusios (snug) atramos taupo medžiagą ir palieka mažiau žymių ant objekto.\n" "Medinėms (tree) atramoms grakštus (slim) ir organinis (organic) stilius agresyviau sujungia šakas ir sutaupo daug medžiagos (numatytasis organinis), o hibridinis (hybrid) stilius sukuria struktūrą, panašią į įprastas atramas po didelėmis plokščiomis iškyšomis (overhangs)." msgid "Default (Grid/Organic)" msgstr "Numatytasis (Tinklelis / Organinis)" msgid "Snug" msgstr "Prigludęs (Snug)" msgid "Organic" msgstr "Organinis (Organic)" msgid "Tree Slim" msgstr "Grakštus medis (Tree Slim)" msgid "Tree Strong" msgstr "Tvirtas medis (Tree Strong)" msgid "Tree Hybrid" msgstr "Hibridinis medis (Tree Hybrid)" msgid "Independent support layer height" msgstr "Nepriklausomas atraminio sluoksnio aukštis" msgid "Support layer uses layer height independent with object layer. This is to support customizing Z-gap and save print time. This option will be invalid when the prime tower is enabled." msgstr "Atramų sluoksniams naudojamas nuo objekto nepriklausomas sluoksnio aukštis. Tai leidžia individualiai pritaikyti Z tarpą ir sutaupyti spausdinimo laiko. Ši parinktis neveikia, kai yra įjungtas valymo bokštelis (prime tower)." msgid "Threshold angle" msgstr "Ribinis kampas" msgid "" "Support will be generated for overhangs whose slope angle is below the threshold. The smaller this value is, the steeper the overhang that can be printed without support.\n" "Note: If set to 0, normal supports use the Threshold overlap instead, while tree supports fall back to a default value of 30." msgstr "" "Atramos bus generuojamos toms iškyšoms, kurių nuolydžio kampas yra mažesnis už šią ribą. Kuo mažesnė ši reikšmė, tuo statesnes iškyšas galima atspausdinti be atramų.\n" "Pastaba: jei nustatyta 0, įprastos atramos vietoj to naudos slenkstinio persidengimo (Threshold overlap) parametrą, o medinės atramos grįš prie numatytosios 30 laipsnių reikšmės." msgid "Threshold overlap" msgstr "Slenksčio persidengimas" msgid "If threshold angle is zero, support will be generated for overhangs whose overlap is below the threshold. The smaller this value is, the steeper the overhang that can be printed without support." msgstr "Jei ribinis kampas lygus nuliui, atramos bus generuojamos iškyšoms, kurių persidengimas yra mažesnis už šią ribą. Kuo mažesnė ši reikšmė, tuo statesnes iškyšas galima atspausdinti be atramų." msgid "Tree support branch angle" msgstr "Atraminio medžio šakos kampas" msgid "This setting determines the maximum overhang angle that the branches of tree support are allowed to make. If the angle is increased, the branches can be printed more horizontally, allowing them to reach farther." msgstr "Šis nustatymas nurodo didžiausią iškyšos kampą, kurį gali sudaryti medinių atramų šakos. Padidinus šį kampą, šakos gali būti spausdinamos horizontaliau, todėl jos gali pasiekti toliau esančias vietas." msgid "Preferred Branch Angle" msgstr "Pageidaujamas šakos kampas" #. TRN PrintSettings: "Organic supports" > "Preferred Branch Angle" msgid "The preferred angle of the branches, when they do not have to avoid the model. Use a lower angle to make them more vertical and more stable. Use a higher angle for branches to merge faster." msgstr "Pageidaujamas šakų kampas, kai joms nereikia vengti modelio. Naudokite mažesnį kampą, kad jos būtų vertikalesnės ir stabilesnės. Naudokite didesnį kampą, kad šakos greičiau susijungtų." msgid "Tree support branch distance" msgstr "Atstumas tarp atraminio medžio šakų" msgid "This setting determines the distance between neighboring tree support nodes." msgstr "Šis nustatymas nustato atstumą tarp kaimyninių medžio atraminių mazgų." msgid "Branch Density" msgstr "Šakų tankis" #. TRN PrintSettings: "Organic supports" > "Branch Density" msgid "Adjusts the density of the support structure used to generate the tips of the branches. A higher value results in better overhangs but the supports are harder to remove, thus it is recommended to enable top support interfaces instead of a high branch density value if dense interfaces are needed." msgstr "Reguliuoja atraminės struktūros tankį ties šakų viršūnėmis. Didesnė reikšmė užtikrina kokybiškesnes iškyšas, tačiau tokias atramas sunkiau pašalinti. Jei reikalingas tankus kontaktas, rekomenduojama įjungti viršutinius atramų sąsajos (interface) sluoksnius, užuot nustačius didelį šakų tankį." msgid "Auto brim width" msgstr "Automatinis pagrindo apvado (brim) plotis" msgid "Enabling this option means the width of the brim for tree support will be automatically calculated." msgstr "Įjungus šią parinktį, medinių atramų pagrindo apvado (brim) plotis bus apskaičiuojamas automatiškai." msgid "Tree support brim width" msgstr "Atraminio medžio pagrindo apvado plotis" msgid "Distance from tree branch to the outermost brim line." msgstr "Atstumas nuo medžio šakos iki tolimiausios pagrindo apvado (brim) linijos." msgid "Tip Diameter" msgstr "Galo skersmuo" #. TRN PrintSettings: "Organic supports" > "Tip Diameter" msgid "Branch tip diameter for organic supports." msgstr "Šakos galo skersmuo organinėms atramoms." msgid "Tree support branch diameter" msgstr "Atraminio medžio šakų skersmuo" msgid "This setting determines the initial diameter of support nodes." msgstr "Šis nustatymas nurodo pradinį medinių atramų mazgų (šakų) skersmenį." #. TRN PrintSettings: #lmFIXME msgid "Branch Diameter Angle" msgstr "Šakų skersmens kampas" #. TRN PrintSettings: "Organic supports" > "Branch Diameter Angle" msgid "The angle of the branches' diameter as they gradually become thicker towards the bottom. An angle of 0 will cause the branches to have uniform thickness over their length. A bit of an angle can increase stability of the organic support." msgstr "Šakų skersmens kampas, joms palaipsniui storėjant link apačios. Jei kampas lygus 0, šakos bus vienodo storio per visą ilgį. Šiek tiek didesnis kampas gali padidinti organinės atramos stabilumą." msgid "Support wall loops" msgstr "Atramų sienelių kontūrai (loops)" msgid "This setting specifies the count of support walls in the range of [0,2]. 0 means auto." msgstr "Šis nustatymas nurodo atramų sienelių skaičių intervale [0,2]. 0 reiškia automatiškai." msgid "Tree support with infill" msgstr "Medžių atramos su užpildymu" msgid "This setting specifies whether to add infill inside large hollows of tree support." msgstr "Šis nustatymas nurodo, ar į dideles medžio atramos ertmes dėti užpildą." msgid "Ironing Support Interface" msgstr "Atramų lyginimo sąsaja" msgid "Ironing is using small flow to print on same height of support interface again to make it more smooth. This setting controls whether support interface being ironed. When enabled, support interface will be extruded as solid too." msgstr "Lyginimas (ironing) – tai procesas, kai naudojant mažą gijos srautą dar kartą spausdinama tame pačiame atramų sąsajos (interface) aukštyje, kad paviršius būtų lygesnis. Šis nustatymas valdo, ar atramų sąsaja bus lyginama. Įjungus šią funkciją, atramų sąsaja taip pat bus spausdinama kaip vientisas (solid) sluoksnis." msgid "Support Ironing Pattern" msgstr "Atramų lyginimo raštas" msgid "Support Ironing flow" msgstr "Atramų lyginimo srautas" msgid "The amount of material to extrude during ironing. Relative to flow of normal support interface layer height. Too high value results in overextrusion on the surface." msgstr "Išspaudžiamos medžiagos kiekis lyginimo metu. Jis skaičiuojamas santykinai pagal įprasto atramų sąsajos sluoksnio aukščio srautą. Per didelė reikšmė sukelia medžiagos perteklių (overextrusion) ant paviršiaus." msgid "Support Ironing line spacing" msgstr "Atramų lyginimo linijų tarpai" msgid "Activate temperature control" msgstr "Suaktyvinti temperatūros reguliavimą" msgid "" "Enable this option for automated chamber temperature control. This option activates the emitting of an M191 command before the \"machine_start_gcode\"\n" " which sets the chamber temperature and waits until it is reached. In addition, it emits an M141 command at the end of the print to turn off the chamber heater, if present.\n" "\n" "This option relies on the firmware supporting the M191 and M141 commands either via macros or natively and is usually used when an active chamber heater is installed." msgstr "" "Įjunkite šią parinktį automatiniam kameros temperatūros valdymui. Ši parinktis aktyvuoja M191 komandos įterpimą prieš „machine_start_gcode“\n" " – ji nustato kameros temperatūrą ir laukia, kol ji bus pasiekta. Taip pat spausdinimo pabaigoje generuojama M141 komanda, skirta išjungti kameros šildytuvą (jei jis yra).\n" "\n" "Ši funkcija veikia tik jei aparatinė programinė įranga palaiko M191 ir M141 komandas (gimtąja kalba arba per makrokomandas) ir dažniausiai naudojama, kai yra sumontuotas aktyvus kameros šildytuvas." msgid "" "For high-temperature materials like ABS, ASA, PC, and PA, a higher chamber temperature can help suppress or reduce warping and potentially lead to higher interlayer bonding strength. However, at the same time, a higher chamber temperature will reduce the efficiency of air filtration for ABS and ASA.\n" "\n" "For PLA, PETG, TPU, PVA, and other low-temperature materials, this option should be disabled (set to 0) as the chamber temperature should be low to avoid extruder clogging caused by material softening at the heat break.\n" "\n" "If enabled, this parameter also sets a G-code variable named chamber_temperature, which can be used to pass the desired chamber temperature to your print start macro, or a heat soak macro like this: PRINT_START (other variables) CHAMBER_TEMP=[chamber_temperature]. This may be useful if your printer does not support M141/M191 commands, or if you desire to handle heat soaking in the print start macro if no active chamber heater is installed." msgstr "" "Aukštos temperatūros medžiagoms (tokioms kaip ABS, ASA, PC ir PA) aukštesnė kameros temperatūra padeda išvengti deformavimosi (warping) arba jį sumažinti, bei gali padidinti tarpsluoksninį sukibimą. Tačiau kartu aukštesnė kameros temperatūra sumažina ABS ir ASA oro filtravimo efektyvumą.\n" "\n" "Žemos temperatūros medžiagoms (tokioms kaip PLA, PETG, TPU, PVA) ši parinktis turėtų būti išjungta (nustatyta reikšmė 0), nes kameros temperatūra privalo išlikti žema, kad gija nesuminkštėtų termoizoliaciniame vamzdelyje (heatbreak) ir neužkimštų ekstruderio.\n" "\n" "Jei įjungta, šis parametras taip pat nustato G-kodo kintamąjį „chamber_temperature“, kurį galima naudoti norimai kameros temperatūrai perduoti į spausdinimo pradžios ar pirminio įšildymo (heat soak) makrokomandą, pavyzdžiui: PRINT_START (kiti kintamieji) CHAMBER_TEMP=[chamber_temperature]. Tai naudinga, jei spausdintuvas nepalaiko M141/M191 komandų arba jei norite pradinį įšildymą valdyti pačioje pradžios makrokomandoje, kai nėra įdiegto aktyvaus kameros šildytuvo." # AI Translated msgid "" "This is the chamber temperature at which printing should start, while the chamber continues heating toward the \"Target\" chamber temperature. For example, set the Target to 60 and the Minimal to 50 to begin printing once the chamber reaches 50℃, without waiting for the full 60℃.\n" "\n" "It sets a G-code variable named chamber_minimal_temperature, which can be passed to your print start macro or a heat soak macro, like this: PRINT_START (other variables) CHAMBER_MIN_TEMP=[chamber_minimal_temperature].\n" "\n" "Unlike the \"Target\" chamber temperature, this option does not emit any M141/M191 commands; it only exposes the value to your custom G-code. It should not exceed the \"Target\" chamber temperature." msgstr "" "Tai kameros temperatūra, kuriai esant spausdinimas turėtų prasidėti, kol kamera toliau kaista link „Tikslinės“ kameros temperatūros. Pavyzdžiui, nustatykite Tikslinę į 60, o Mažiausią į 50, kad spausdinimas prasidėtų vos kamerai pasiekus 50℃, nelaukiant pilnų 60℃.\n" "\n" "Ji nustato G-code kintamąjį, pavadintą chamber_minimal_temperature, kurį galima perduoti spausdinimo pradžios makrokomandai arba įkaitinimo makrokomandai, pavyzdžiui: PRINT_START (kiti kintamieji) CHAMBER_MIN_TEMP=[chamber_minimal_temperature].\n" "\n" "Skirtingai nei „Tikslinė“ kameros temperatūra, ši parinktis nesiunčia jokių M141/M191 komandų; ji tik pateikia reikšmę jūsų pasirinktinei G-code. Ji neturėtų viršyti „Tikslinės“ kameros temperatūros." msgid "Chamber minimal temperature" msgstr "Minimali kameros temperatūra." msgid "Nozzle temperature after the first layer" msgstr "Purkštuko temperatūra po pirmojo sluoksnio." msgid "Detect thin walls" msgstr "Aptikti plonas sieneles" msgid "This detects thin walls which can’t contain two lines and uses a single line to print. It may not print as well because it’s not a closed loop." msgstr "Tai aptinka plonas sieneles, kuriose negali tilpti dvi linijos, ir spausdinimui naudoja vieną liniją. Ji gali būti atspausdinta ne taip gerai, nes tai nėra uždara kilpa." msgid "This G-code is inserted when filament is changed, including T commands to trigger tool change." msgstr "Šis G-kodas įterpiamas keičiant giją, įskaitant T komandas, skirtas įrankio pakeitimui inicijuoti." msgid "This G-code is inserted when the extrusion role is changed." msgstr "Šis G-kodas įterpiamas, kai pasikeičia išspaudimo tipas (vaidmuo)." msgid "Change extrusion role G-code (filament)" msgstr "Išspaudimo tipo keitimo G-kodas (gijai)" msgid "This G-code is inserted when the extrusion role is changed for the active filament." msgstr "Šis G-kodas įterpiamas, kai pasikeičia aktyvios gijos išspaudimo tipas (vaidmuo)." msgid "Line width for top surfaces. If expressed as a %, it will be computed over the nozzle diameter." msgstr "Viršutinių paviršių linijos plotis. Jei išreiškiamas %, jis bus apskaičiuojamas pagal purkštuko skersmenį." msgid "This is the speed for solid top surface infill." msgstr "Tai yra vientiso viršutinio paviršiaus užpildymo greitis." msgid "Top shell layers" msgstr "Viršutiniai apvalkalo sluoksniai" msgid "This is the number of solid layers of top shell, including the top surface layer. When the thickness calculated by this value is thinner than the top shell thickness, the top shell layers will be increased" msgstr "Tai viršutinio apvalkalo vientisų sluoksnių skaičius, įskaitant viršutinio paviršiaus sluoksnį. Kai pagal šią reikšmę apskaičiuotas storis yra mažesnis už viršutinio apvalkalo storį, viršutinio apvalkalo sluoksnių skaičius bus padidintas." msgid "Top shell thickness" msgstr "Viršutinio apvalkalo storis" msgid "The number of top solid layers is increased when slicing if the thickness calculated by top shell layers is thinner than this value. This can avoid having too thin a shell when layer height is small. 0 means that this setting is disabled and thickness of top shell is determined simply by the number of top shell layers." msgstr "Viršutinių vientisų sluoksnių skaičius pjaustymo metu padidinamas, jei pagal viršutinio apvalkalo sluoksnius apskaičiuotas storis yra mažesnis už šią reikšmę. Tai padeda išvengti per plono apvalkalo, kai sluoksnio aukštis yra mažas. 0 reiškia, kad šis nustatymas išjungtas ir viršutinio apvalkalo storis nustatomas paprasčiausiai pagal viršutinio apvalkalo sluoksnių skaičių." # AI Translated msgid "Separated infills" msgstr "Atskirti užpildai" # AI Translated msgid "" "Centers the internal infill of each part on itself, as if it were sliced on its own, instead of on the whole assembly. Parts that touch or overlap are treated as one body and share a center; separate parts (or distinct 3D objects) each get their own.\n" "Useful when an assembly groups several objects that should each keep a consistent, self-centered infill.\n" "Affects line and grid patterns and rotation-template infills.\n" "Patterns locked to global coordinates (Gyroid, Honeycomb, TPMS, ...) are unaffected." msgstr "" "Centruoja kiekvienos dalies vidinį užpildą pagal ją pačią, tarsi ji būtų supjaustyta atskirai, o ne pagal visą surinkinį. Besiliečiančios ar persidengiančios dalys traktuojamos kaip vienas kūnas ir dalijasi vienu centru; atskiros dalys (arba skirtingi 3D objektai) gauna savo centrą.\n" "Naudinga, kai surinkinys sugrupuoja kelis objektus, kurių kiekvienas turi išlaikyti nuoseklų, į save centruotą užpildą.\n" "Veikia linijų ir tinklelio raštus bei pasukimo šablonų užpildus.\n" "Raštai, pririšti prie globalių koordinačių (Giroidas, Korys, TPMS, ...), nepaveikiami." # AI Translated msgid "Center surface pattern on" msgstr "Centruoti paviršiaus raštą pagal" # AI Translated msgid "" "Chooses where the centering point of centered top/bottom surface patterns (Archimedean Chords, Octagram Spiral) is placed.\n" " - Each Surface: centers the pattern on every individual surface region, so each island is symmetric on its own.\n" " - Each Model: centers the pattern on each connected body. Parts that touch or overlap share one center; parts detached from the rest each get their own.\n" " - Each Assembly: uses a single shared center for the whole object or assembly." msgstr "" "Pasirenka, kur dedamas centruotų viršutinio/apatinio paviršiaus raštų (Archimedo stygų, Oktogramos spiralės) centravimo taškas.\n" " - „Kiekvienas paviršius“: centruoja raštą kiekvienoje atskiroje paviršiaus srityje, todėl kiekviena sala yra simetriška savaime.\n" " - „Kiekvienas modelis“: centruoja raštą kiekviename sujungtame kūne. Besiliečiančios ar persidengiančios dalys dalijasi vienu centru; nuo likusiųjų atskirtos dalys gauna savo centrą.\n" " - „Kiekvienas surinkinys“: naudoja vieną bendrą centrą visam objektui ar surinkiniui." # AI Translated msgid "Each Surface" msgstr "Kiekvienas paviršius" # AI Translated msgid "Each Model" msgstr "Kiekvienas modelis" # AI Translated msgid "Each Assembly" msgstr "Kiekvienas surinkinys" msgid "This is the speed at which traveling is done." msgstr "Tai yra judėjimo (angl. \"travel\") greitis." msgid "Wipe while retracting" msgstr "Nuvalyti įtraukiant" msgid "This moves the nozzle along the last extrusion path when retracting to clean any leaked material on the nozzle. This can minimize blobs when printing a new part after traveling." msgstr "Tai juda purkštuku išilgai paskutinio ekstruzijos kelio atitraukimo metu, kad nuvalytų bet kokią ištekėjusią medžiagą nuo purkštuko. Tai gali sumažinti „gumuliukų“ (angl. \"blobs\") susidarymą spausdinant naują detalės dalį po judėjimo." msgid "Wipe distance" msgstr "Valymo atstumas." msgid "" "Describe how long the nozzle will move along the last path when retracting.\n" "\n" "Depending on how long the wipe operation lasts, how fast and long the extruder/filament retraction settings are, a retraction move may be needed to retract the remaining filament.\n" "\n" "Setting a value in the retract amount before wipe setting below will perform any excess retraction before the wipe, else it will be performed after." msgstr "" "Nurodo, kokį atstumą purkštukas nukeliaus paskutine trajektorija atliekant įtraukimą.\n" "\n" "Priklausomai nuo nuvalymo (wipe) operacijos trukmės bei ekstruderio gijos įtraukimo (retraction) greičio bei ilgio nustatymų, gali prireikti papildomo judesio likusiai gijai įtraukti.\n" "\n" "Jei žemiau esančiame nustatyme „Įtraukimo kiekis prieš nuvalymą“ nurodysite reikšmę, perteklinis gijos įtraukimas bus atliktas prieš nuvalymą, kitu atveju – po jo." msgid "The wiping tower can be used to clean up residue on the nozzle and stabilize the chamber pressure inside the nozzle in order to avoid appearance defects when printing objects." msgstr "Valymo bokštelis (angl. \"wiping tower\") gali būti naudojamas likučiams nuo purkštuko nuvalyti ir purkštuko viduje esančiam slėgiui stabilizuoti, siekiant išvengti išvaizdos defektų spausdinant objektus." msgid "Internal ribs" msgstr "Vidinės briaunos (ribs)" msgid "Enable internal ribs to increase the stability of the prime tower." msgstr "Įjungti vidines briaunas, kad padidėtų valymo bokštelio (prime tower) stabilumas." msgid "Purging volumes" msgstr "Gijos pravalymo (purging) tūriai" msgid "Flush multiplier" msgstr "Pravalymo (flush) daugiklis" msgid "The actual flushing volumes is equal to the flush multiplier value multiplied by the flushing volumes in the table." msgstr "Faktiniai išplovimo tūriai yra lygūs išplovimo daugiklio reikšmei, padaugintai iš lentelėje nurodytų išplovimo tūrių." # AI Translated msgid "Flush multiplier (Fast mode)" msgstr "Pravalymo daugiklis (greitasis režimas)" # AI Translated msgid "The flush multiplier used in fast purge mode." msgstr "Pravalymo daugiklis, naudojamas greitojo pravalymo režime." msgid "Prime volume" msgstr "Ekstruderio paruošimo (prime) tūris" msgid "This is the volume of material to prime the extruder with on the tower." msgstr "Tai yra medžiagos tūris, skirtas ekstruderiui užpildyti (paruošti) ant bokštelio." # AI Translated msgid "Prime volume mode" msgstr "Priešpildos tūrio režimas" # AI Translated msgid "Selects how the wipe-tower prime and flush volumes are computed on multi-extruder printers." msgstr "Pasirenka, kaip apskaičiuojami valymo bokšto priešpildos ir pravalymo tūriai daugelio ekstruderių spausdintuvuose." # AI Translated msgid "Saving" msgstr "Išsaugoma" # AI Translated msgid "Fast" msgstr "Greitas" msgid "This is the width of prime towers." msgstr "Tai yra paruošiamųjų bokštelių plotis." msgid "Wipe tower rotation angle" msgstr "Valymo bokšto sukimosi kampas" msgid "Wipe tower rotation angle with respect to X axis." msgstr "Valymo bokštelio sukimosi kampas X ašies atžvilgiu." msgid "Brim width of prime tower, negative number means auto calculated width based on the height of prime tower." msgstr "Valymo bokštelio pagrindo apvado (brim) plotis. Neigiama reikšmė nurodo, kad plotis bus apskaičiuojamas automatiškai pagal valymo bokštelio aukštį." msgid "Stabilization cone apex angle" msgstr "Stabilizavimo kūgio viršūnės kampas" msgid "Angle at the apex of the cone that is used to stabilize the wipe tower. Larger angle means wider base." msgstr "Kūgio, naudojamo valymo bokšteliui stabilizuoti, viršūnės kampas. Didesnis kampas reiškia platesnį pagrindą." msgid "Maximum wipe tower print speed" msgstr "Didžiausias valymo bokštelio spausdinimo greitis" msgid "" "The maximum print speed when purging in the wipe tower and printing the wipe tower sparse layers. When purging, if the sparse infill speed or calculated speed from the filament max volumetric speed is lower, the lowest will be used instead.\n" "\n" "When printing the sparse layers, if the internal perimeter speed or calculated speed from the filament max volumetric speed is lower, the lowest will be used instead.\n" "\n" "Increasing this speed may affect the tower's stability as well as increase the force with which the nozzle collides with any blobs that may have formed on the wipe tower.\n" "\n" "Before increasing this parameter beyond the default of 90 mm/s, make sure your printer can reliably bridge at the increased speeds and that ooze when tool changing is well controlled.\n" "\n" "For the wipe tower external perimeters the internal perimeter speed is used regardless of this setting." msgstr "" "Didžiausias spausdinimo greitis atliekant gijos pravalymą (purging) bei spausdinant valymo bokštelio retuosius (sparse) sluoksnius. Jei pravalymo metu retojo užpildo greitis arba apskaičiuotas greitis pagal maksimalų tūrinį gijos greitį yra mažesnis, bus naudojamas mažiausias iš jų.\n" "\n" "Spausdinant retuosius sluoksnius, jei vidinio perimetro greitis arba apskaičiuotas greitis pagal maksimalų tūrinį gijos greitį yra mažesnis, bus naudojamas mažiausias iš jų.\n" "\n" "Padidinus šį greitį, gali nukentėti bokštelio stabilumas bei padidėti jėga, su kuria purkštukas susidurs su bet kokiais ant valymo bokštelio susidariusiais gijos gumbeliais (blobs).\n" "\n" "Prieš didindami šį parametrą virš numatytųjų 90 mm/s, įsitikinkite, kad jūsų spausdintuvas patikimai formuoja tiltelius (bridging) esant didesniam greičiui, o gijos nutekėjimas (ooze) keičiant įrankį yra gerai kontroliuojamas.\n" "\n" "Valymo bokštelio išoriniams perimetrams, nepriklausomai nuo šio nustatymo, visada naudojamas vidinio perimetro greitis." msgid "Wall type" msgstr "Sienelės tipas" msgid "" "Wipe tower outer wall type.\n" "1. Rectangle: The default wall type, a rectangle with fixed width and height.\n" "2. Cone: A cone with a fillet at the bottom to help stabilize the wipe tower.\n" "3. Rib: Adds four ribs to the tower wall for enhanced stability." msgstr "" "Valymo bokštelio išorinės sienelės tipas.\n" "1. Stačiakampis (Rectangle): numatytasis sienelės tipas – fiksuoto pločio ir aukščio stačiakampis.\n" "2. Kūgis (Cone): kūgis su suapvalinimu apačioje, padedantis stabilizuoti valymo bokštelį.\n" "3. Briauna (Rib): prie bokštelio sienelės pridedamos keturios briaunos geresniam stabilumui užtikrinti." msgid "Rectangle" msgstr "Stačiakampis" msgid "Rib" msgstr "Briauna (Rib)" msgid "Extra rib length" msgstr "Papildomas briaunos ilgis" msgid "Positive values can increase the size of the rib wall, while negative values can reduce the size. However, the size of the rib wall can not be smaller than that determined by the cleaning volume." msgstr "Teigiamos reikšmės padidina briaunotos sienelės matmenis, o neigiamos – sumažina. Tačiau briaunotos sienelės matmenys negali būti mažesni už tuos, kuriuos nulemia nustatytas gijos pravalymo tūris." msgid "Rib width" msgstr "Briaunų plotis" msgid "Rib width is always less than half the prime tower side length." msgstr "Briaunos plotis visada turi būti mažesnis nei pusė valymo bokštelio šoninės sienelės ilgio." msgid "Fillet wall" msgstr "Sienelės suapvalinimas (Fillet)" msgid "The wall of prime tower will fillet." msgstr "Valymo bokštelio sienelės kampai bus suapvalinti." msgid "The extruder to use when printing perimeter of the wipe tower. Set to 0 to use the one that is available (non-soluble would be preferred)." msgstr "Ekstruderis, naudojamas spausdinant valymo bokštelio perimetrą. Nustatykite reikšmę 0, kad būtų naudojamas bet kuris tuo metu prieinamas (rekomenduojama naudoti netirpų)." msgid "Purging volumes - load/unload volumes" msgstr "Pravalymo tūriai – gijos užpildymo (load) / iškrovimo (unload) tūriai" msgid "This vector saves required volumes to change from/to each tool used on the wipe tower. These values are used to simplify creation of the full purging volumes below." msgstr "Šiame masyve (vektoriuje) išsaugomi reikiami gijos tūriai, skirti įrankių sukeitimui ant valymo bokštelio. Šios reikšmės naudojamos žemiau esančios bendros pravalymo tūrių lentelės užpildymui supaprastinti." msgid "Skip points" msgstr "Praleidžiami taškai (Skip points)" msgid "The wall of prime tower will skip the start points of wipe path." msgstr "Valymo bokštelio sienelėje bus praleidžiami nuvalymo (wipe) trajektorijos pradiniai taškai." msgid "Enable tower interface features" msgstr "Įjungti bokštelio sąsajos (interface) funkcijas" msgid "Enable optimized prime tower interface behavior when different materials meet." msgstr "Įjungti optimizuotą valymo bokštelio sąsajos elgseną, kai susiduria skirtingos medžiagos." msgid "Cool down from interface boost during prime tower" msgstr "Purkštuko aušinimas valymo bokštelyje po sąsajos temperatūros padidinimo" msgid "When interface-layer temperature boost is active, set the nozzle back to print temperature at the start of the prime tower so it cools down during the tower." msgstr "Kai yra aktyvus sąsajos sluoksnio temperatūros padidinimas, valymo bokštelio pradžioje purkštuko temperatūra vėl sumažinama iki darbinio spausdinimo lygio, kad purkštukas atvėstų spausdinant bokštelį." msgid "Infill gap" msgstr "Užpildo tarpas (Infill gap)" msgid "Infill gap." msgstr "Tarpas tarp užpildo ir vidinių sienelių." msgid "Purging after filament change will be done inside objects' infills. This may lower the amount of waste and decrease the print time. If the walls are printed with transparent filament, the mixed color infill will be visible. It will not take effect unless the prime tower is enabled." msgstr "Išplovimas (angl. \"purging\") pakeitus siūlelį bus atliekamas objektų užpildo viduje. Tai gali sumažinti atliekų kiekį ir sutrumpinti spausdinimo laiką. Jei sienelės spausdinamos skaidriu siūleliu, sumaišytų spalvų užpildas bus matomas. Ši funkcija neveiks, jei nėra įjungtas paruošiamasis bokštelis (angl. \"prime tower\")." msgid "Purging after filament change will be done inside objects' support. This may lower the amount of waste and decrease the print time. It will not take effect unless a prime tower is enabled." msgstr "Išplovimas pakeitus siūlelį bus atliekamas objektų atramų viduje. Tai gali sumažinti atliekų kiekį ir sutrumpinti spausdinimo laiką. Ši funkcija neveiks, jei nėra įjungtas paruošiamasis bokštelis." msgid "This object will be used to purge the nozzle after a filament change to save filament and decrease the print time. Colors of the objects will be mixed as a result. It will not take effect unless the prime tower is enabled." msgstr "Šis objektas bus naudojamas purkštuko pravalymui po gijos pakeitimo, siekiant sutaupyti medžiagos ir sutrumpinti spausdinimo laiką. Dėl šios priežasties pereinamieji gijos atspalviai bus sumaišyti pačiame objekte. Ši funkcija veikia tik tuomet, kai įjungtas valymo bokštelis." msgid "Maximal bridging distance" msgstr "Maksimalus tiltelio atstumas" msgid "Maximal distance between supports on sparse infill sections." msgstr "Maksimalus atstumas tarp atramų retose užpildymo dalyse." msgid "Wipe tower purge lines spacing" msgstr "Atstumai tarp valymo bokšto valymo linijų" msgid "Spacing of purge lines on the wipe tower." msgstr "Valymo bokšto valymo linijų atstumai." msgid "Extra flow for purging" msgstr "Papildomas pravalymo srautas" msgid "Extra flow used for the purging lines on the wipe tower. This makes the purging lines thicker or narrower than they normally would be. The spacing is adjusted automatically." msgstr "Papildomas gijos srautas, naudojamas valymo bokštelio pravalymo linijoms. Jis leidžia suformuoti storesnes arba siauresnes pravalymo linijas nei įprastai. Atstumai tarp linijų pritaikomi automatiškai." msgid "Idle temperature" msgstr "Budėjimo (idle) temperatūra" msgid "Nozzle temperature when the tool is currently not used in multi-tool setups. This is only used when 'Ooze prevention' is active in Print Settings. Set to 0 to disable." msgstr "Purkštuko temperatūra, kai įrankis nėra naudojamas kelių įrankių (multi-tool) konfigūracijose. Šis parametras taikomas tik tuomet, kai spausdinimo nustatymuose įjungta „Gijos nutekėjimo prevencija“ (Ooze prevention). Nustatykite 0, jei norite išjungti." msgid "X-Y hole compensation" msgstr "XY angų kompensavimas" msgid "Holes in objects will expand or contract in the XY plane by the set value. Positive values make holes bigger and negative values make holes smaller. This function is used to adjust sizes slightly when objects have assembly issues." msgstr "Objektuose esančios skylės išsiplės arba susitrauks XY plokštumoje nustatyta reikšme. Teigiamos reikšmės skyles padidina, o neigiamos – sumažina. Ši funkcija naudojama šiek tiek pakoreguoti matmenis, kai kyla problemų surenkant objektus." msgid "X-Y contour compensation" msgstr "XY kontūro kompensavimas" msgid "Contours of objects will expand or contract in the XY plane by the set value. Positive values make contours bigger and negative values make contours smaller. This function is used to adjust sizes slightly when objects have assembly issues." msgstr "Objektų kontūrai išsiplės arba susitrauks XY plokštumoje nustatyta reikšme. Teigiamos reikšmės kontūrus padidina, o neigiamos – sumažina. Ši funkcija naudojama šiek tiek pakoreguoti matmenis, kai kyla problemų surenkant objektus." msgid "Convert holes to polyholes" msgstr "Konvertuoti skyles į daugiakampes (polyholes)" msgid "" "Search for almost-circular holes that span more than one layer and convert the geometry to polyholes. Use the nozzle size and the (biggest) diameter to compute the polyhole.\n" "See http://hydraraptor.blogspot.com/2011/02/polyholes.html" msgstr "" "Ieško beveik apskritų skylių, kurios tęsiasi per kelis sluoksnius, ir konvertuoja jų geometriją į daugiakampes skyles (polyholes). Daugiakampės skylės skaičiavimui naudojamas purkštuko dydis ir (didžiausias) skersmuo.\n" "Žr. http://hydraraptor.blogspot.com/2011/02/polyholes.html" msgid "Polyhole detection margin" msgstr "Daugiakampių skylių (polyholes) aptikimo paklaida" #, no-c-format, no-boost-format msgid "" "Maximum defection of a point to the estimated radius of the circle.\n" "As cylinders are often exported as triangles of varying size, points may not be on the circle circumference. This setting allows you some leeway to broaden the detection.\n" "In mm or in % of the radius." msgstr "" "Didžiausias taško nuokrypis nuo apskaičiuoto apskritimo spindulio.\n" "Kadangi cilindriniai paviršiai modeliuose dažnai eksportuojami kaip skirtingo dydžio trikampių tinklas, taškai gali nesutapti su idealiu apskritimo perimetru. Šis nustatymas leidžia išplėsti aptikimo ribas.\n" "Nurodoma mm arba % nuo spindulio." msgid "Polyhole twist" msgstr "Daugiakampių skylių persukimas (Polyhole twist)" msgid "Rotate the polyhole every layer." msgstr "Pasukti daugiakampės skylės orientaciją kiekviename sluoksnyje." msgid "Maximum Polyhole edge count" msgstr "Maksimalus poliskylės briaunų skaičius." msgid "" "Maximum number of polyhole edges\n" "This setting limits the amount of edges a polyhole can have" msgstr "" "Maksimalus poliskylės briaunų skaičius.\n" "Šis nustatymas riboja briaunų, kurias gali turėti poliskylė, kiekį." msgid "G-code thumbnails" msgstr "G-kodo miniatiūros" msgid "Picture sizes to be stored into a .gcode and .sl1 / .sl1s files, in the following format: \"XxY, XxY, ...\"" msgstr "Nuotraukų dydžiai, saugomi .gcode ir .sl1 / .sl1s failuose tokiu formatu: \"XxY, XxY, ...\"" msgid "Format of G-code thumbnails" msgstr "G-kodo miniatiūrų formatas" msgid "Format of G-code thumbnails: PNG for best quality, JPG for smallest size, QOI for low memory firmware." msgstr "G-kodo miniatiūrų formatas: PNG – geriausia kokybė, JPG – mažiausio dydžio, QOI – mažos atminties programinei įrangai." msgid "Use relative E distances" msgstr "Naudoti santykinius E atstumus" msgid "Relative extrusion is recommended when using \"label_objects\" option. Some extruders work better with this option unchecked (absolute extrusion mode). Wipe tower is only compatible with relative mode. It is recommended on most printers. Default is checked." msgstr "Naudojant parinktį „label_objects“ rekomenduojama naudoti santykinį išspaudimą (relative extrusion). Kai kurie ekstruderiai veikia geriau, kai ši parinktis nepažymėta (absoliutaus išspaudimo režimas). Valymo bokštelis suderinamas tik su santykiniu režimu. Jį rekomenduojama naudoti daugumoje spausdintuvų. Pagal numatytuosius nustatymus parinktis yra įjungta." msgid "The classic wall generator produces walls with constant extrusion width and for very thin areas, gap-fill is used. The Arachne engine produces walls with variable extrusion width." msgstr "Klasikinis sienelių generatorius sukuria pastovaus ekstruzijos pločio sieneles, o labai plonoms vietoms užpildyti naudojamas tarpų užpildymas (angl. \"gap-fill\"). „Arachne“ variklis sukuria kintamo ekstruzijos pločio sieneles." msgid "Arachne" msgstr "Arachnė" msgid "Wall transition length" msgstr "Sienelių perėjimo ilgis" msgid "When transitioning between different numbers of walls as the part becomes thinner, a certain amount of space is allotted to split or join the wall segments. It's expressed as a percentage over nozzle diameter." msgstr "Pereinant nuo vieno sienelių skaičiaus prie kito, kai detalė tampa plonesnė, sienelių segmentams padalyti arba sujungti skiriama tam tikra erdvė. Jis išreiškiamas procentais nuo purkštuko skersmens." msgid "Wall transitioning filter margin" msgstr "Sienelių perėjimo filtro paklaida (margin)" msgid "Prevent transitioning back and forth between one extra wall and one less. This margin extends the range of extrusion widths which follow to [Minimum wall width - margin, 2 * Minimum wall width + margin]. Increasing this margin reduces the number of transitions, which reduces the number of extrusion starts/stops and travel time. However, large extrusion width variation can lead to under- or overextrusion problems. It's expressed as a percentage over nozzle diameter." msgstr "Neleidžia perėjimo algoritmui nuolat persijungti pirmyn ir atgal tarp vienos papildomos ir viena mažesnės sienelės. Ši paklaida išplečia tolimesnių ekstruzijos pločių diapazoną iki [minimalus sienelės plotis - paklaida, 2 * minimalus sienelės plotis + paklaida]. Padidinus šią paklaidą, sumažėja perėjimų skaičius, o tai sumažina ekstruzijos pradžios / stabdymo taškų skaičių ir tuščiojo judėjimo (travel) laiką. Tačiau dideli ekstruzijos pločio svyravimai gali sukelti nepritekliaus (under-extrusion) arba pertekliaus (over-extrusion) problemų. Reikšmė išreiškiama procentais nuo purkštuko skersmens." msgid "Wall transitioning threshold angle" msgstr "Sienelių perėjimo slenksčio kampas" msgid "When to create transitions between even and odd numbers of walls. A wedge shape with an angle greater than this setting will not have transitions and no walls will be printed in the center to fill the remaining space. Reducing this setting reduces the number and length of these center walls, but may leave gaps or overextrude." msgstr "Nustato, kada kurti perėjimus tarp lyginio ir nelyginio sienelių skaičiaus. Pleišto formos geometrijoje, kurios kampas yra didesnis už šį nustatymą, perėjimai nebus kuriami ir centre nebus spausdinamos papildomos sienelės likusiai erdvei užpildyti. Sumažinus šią reikšmę, sumažėja šių centrinių sienelių skaičius ir ilgis, tačiau gali likti tuštumų arba susidaryti medžiagos perteklius (over-extrusion)." msgid "Wall distribution count" msgstr "Sienelių pasiskirstymo skaičius" msgid "The number of walls, counted from the center, over which the variation needs to be spread. Lower values mean that the outer walls don't change in width." msgstr "Sienelių skaičius, skaičiuojant nuo centro, per kurias turi būti paskirstytas pločio svyravimas. Mažesnės reikšmės reiškia, kad išorinių sienelių plotis išlieka pastovus." msgid "Minimum feature size" msgstr "Minimalus elemento dydis (Minimum feature size)" msgid "Minimum thickness of thin features. Model features that are thinner than this value will not be printed, while features thicker than than this value will be widened to the minimum wall width. It's expressed as a percentage over nozzle diameter." msgstr "Mažiausias plonų elementų storis. Modelio elementai, plonesni už šią reikšmę, nebus spausdinami, o elementai, storesni už šią reikšmę, bus praplatinti iki minimalaus sienelės pločio. Išreiškiama procentais nuo purkštuko skersmens." msgid "Minimum wall length" msgstr "Mažiausias sienelės ilgis" msgid "" "Adjust this value to prevent short, unclosed walls from being printed, which could increase print time. Higher values remove more and longer walls.\n" "\n" "NOTE: Bottom and top surfaces will not be affected by this value to prevent visual gaps on the outside of the model. Adjust 'One wall threshold' in the Advanced settings below to adjust the sensitivity of what is considered a top-surface. 'One wall threshold' is only visible if this setting is set above the default value of 0.5, or if single-wall top surfaces is enabled." msgstr "" "Pakoreguokite šią reikšmę, kad nebūtų spausdinamos trumpos, neuždaros sienelės, galinčios pailginti spausdinimo laiką. Didesnės reikšmės pašalina daugiau ir ilgesnes sieneles.\n" "\n" "PASTABA: Šis nustatymas neturi įtakos apatiniams ir viršutiniams paviršiams, kad modelio išorėje neatsirastų matomų tuštumų. Žemiau esančiuose išplėstiniuose nustatymuose pakeiskite parametro „Vienos sienelės slenkstis“ (One wall threshold) jautrumą, apibrėžiantį, kas laikoma viršutiniu paviršiumi. Šis slenkstis matomas tik tada, kai nustatymas viršija numatytąją 0,5 reikšmę arba kai įjungta vienos sienelės viršutinių paviršių funkcija." msgid "Maximum wall resolution" msgstr "Didžiausia sienelių skiriamoji geba (resolution)" msgid "This value determines the smallest wall line segment length in mm. The smaller you set this value, the more accurate and precise the walls will be." msgstr "Ši reikšmė nustato mažiausią sienelės linijos segmento ilgį milimetrais (mm). Kuo mažesnę reikšmę nustatysite, tuo tikslesnės ir detalesnės bus sienelės." msgid "Maximum wall deviation" msgstr "Didžiausias sienelės nuokrypis" msgid "The maximum deviation allowed when reducing the resolution for the 'Maximum wall resolution' setting. If you increase this, the print will be less accurate, but the G-Code will be smaller. 'Maximum wall deviation' limits 'Maximum wall resolution', so if the two conflict, 'Maximum wall deviation' takes precedence." msgstr "Didžiausias leidžiamas nuokrypis, mažinant „Didžiausios sienelės raiškos“ nustatymo skiriamąją gebą. Jei jį padidinsite, spaudinys bus mažiau tikslus, tačiau G-kodas (G-Code) bus mažesnės apimties. „Didžiausias sienelės nuokrypis“ riboja „Didžiausią sienelės raišką“, todėl jei šie du nustatymai konfliktuoja, viršenybė teikiama „Didžiausiam sienelės nuokrypiui“." msgid "First layer minimum wall width" msgstr "Pirmojo sluoksnio mažiausias sienelės plotis" msgid "The minimum wall width that should be used for the first layer is recommended to be set to the same size as the nozzle. This adjustment is expected to enhance adhesion." msgstr "Mažiausią sienelės plotį, kuris turėtų būti naudojamas pirmajam sluoksniui, rekomenduojama nustatyti tokio pat dydžio, kaip ir purkštuko skersmuo. Tikimasi, kad šis koregavimas pagerins sukibimą." msgid "Minimum wall width" msgstr "Mažiausias sienelės plotis" msgid "Width of the wall that will replace thin features (according to the Minimum feature size) of the model. If the Minimum wall width is thinner than the thickness of the feature, the wall will become as thick as the feature itself. It's expressed as a percentage over nozzle diameter." msgstr "Sienelės, kuri pakeis plonus modelio elementus (pagal mažiausią elemento dydį), plotis. Jei mažiausias sienelės plotis yra mažesnis už elemento storį, sienelė taps tokio pat storio, kaip ir pats elementas. Jis išreiškiamas procentais nuo purkštuko skersmens." # AI Translated msgid "Hotend change time" msgstr "Kaitinimo bloko keitimo laikas" # AI Translated msgid "Time to change hotend." msgstr "Laikas kaitinimo blokui pakeisti." # AI Translated msgid "Hotend change" msgstr "Kaitinimo bloko keitimas" # AI Translated msgid "When changing the hotend, it is recommended to extrude a certain length of filament from the original nozzle. This helps minimize nozzle oozing." msgstr "Keičiant kaitinimo bloką rekomenduojama iš pradinio purkštuko išspausti tam tikrą gijos ilgį. Tai padeda sumažinti purkštuko nutekėjimą." # AI Translated msgid "Extruder change" msgstr "Ekstruderio keitimas" # AI Translated msgid "To prevent oozing, the nozzle will perform a reverse travel movement for a certain period after the ramming is complete. The setting define the travel time." msgstr "Siekiant išvengti nutekėjimo, purkštukas tam tikrą laiką po tankinimo pabaigos atliks atbulinį judesį. Šis nustatymas apibrėžia judesio trukmę." # AI Translated msgid "To prevent oozing, the nozzle temperature will be cooled during ramming. Therefore, the ramming time must be greater than the cooldown time. 0 means disabled." msgstr "Siekiant išvengti nutekėjimo, purkštuko temperatūra tankinimo metu bus vėsinama. Todėl tankinimo laikas turi būti didesnis už atvėsimo laiką. 0 reiškia išjungta." # AI Translated msgid "The maximum volumetric speed for ramming before extruder change, where -1 means using the maximum volumetric speed." msgstr "Didžiausias tūrinis greitis tankinimui prieš ekstruderio keitimą, kur -1 reiškia didžiausio tūrinio greičio naudojimą." # AI Translated msgid "To prevent oozing, the nozzle temperature will be cooled during ramming. Note: only a cooldown command and fan activation are triggered, reaching the target temperature is not guaranteed. 0 means disabled." msgstr "Siekiant išvengti nutekėjimo, purkštuko temperatūra tankinimo metu bus vėsinama. Pastaba: suveikia tik atvėsinimo komanda ir ventiliatoriaus įjungimas, tikslinės temperatūros pasiekimas negarantuojamas. 0 reiškia išjungta." # AI Translated msgid "The maximum volumetric speed for ramming before a hotend change, where -1 means using the maximum volumetric speed." msgstr "Didžiausias tūrinis greitis tankinimui prieš kaitinimo bloko keitimą, kur -1 reiškia didžiausio tūrinio greičio naudojimą." # AI Translated msgid "length when change hotend" msgstr "ilgis keičiant kaitinimo bloką" # AI Translated msgid "When this retraction value is modified, it will be used as the amount of filament retracted inside the hotend before changing hotends." msgstr "Kai ši atitraukimo reikšmė pakeičiama, ji bus naudojama kaip gijos, atitraukiamos kaitinimo bloko viduje prieš keičiant kaitinimo blokus, kiekis." # AI Translated msgid "Support fast purge mode" msgstr "Palaikyti greitąjį pravalymo režimą" # AI Translated msgid "Whether this printer supports fast purge mode with optimized temperature and multiplier." msgstr "Ar šis spausdintuvas palaiko greitąjį pravalymo režimą su optimizuota temperatūra ir daugikliu." # AI Translated msgid "Filament change" msgstr "Gijos keitimas" # AI Translated msgid "The volume of material required to prime the extruder on the tower, excluding a hotend change." msgstr "Medžiagos tūris, reikalingas ekstruderiui priešpildyti ant bokšto, neįskaitant kaitinimo bloko keitimo." # AI Translated msgid "The volume of material required to prime the extruder for a hotend change on the tower." msgstr "Medžiagos tūris, reikalingas ekstruderiui priešpildyti kaitinimo bloko keitimui ant bokšto." # AI Translated msgid "Preheat temperature delta" msgstr "Pašildymo temperatūros pokytis" # AI Translated msgid "Temperature delta applied during pre-heating before tool change." msgstr "Temperatūros pokytis, taikomas pašildant prieš įrankio keitimą." msgid "Detect narrow internal solid infills" msgstr "Aptikti siaurus vidinius vientisus užpildus" msgid "This option will auto-detect narrow internal solid infill areas. If enabled, the concentric pattern will be used for the area to speed up printing. Otherwise, the rectilinear pattern will be used by default." msgstr "Ši parinktis automatiškai aptiks siauras vidines vientiso užpildo sritis. Jei ji įjungta, šiose srityse bus naudojamas koncentrinis raštas, kad spausdinimas būtų pagreitintas. Priešingu atveju pagal numatytuosius nustatymus bus naudojamas tiesiaeigis raštas." msgid "invalid value " msgstr "netinkama reikšmė " msgid "Invalid value when spiral vase mode is enabled: " msgstr "Netinkama reikšmė, kai įjungtas spiralinės vazos režimas: " msgid "Bridge line width must not exceed nozzle diameter: " msgstr "Tiltelių linijos plotis negali viršyti purkštuko skersmens: " msgid "too large line width " msgstr "per didelis linijos plotis " msgid " not in range " msgstr " nepatenka į intervalą " msgid "Export 3MF" msgstr "Eksportuoti 3MF" msgid "This exports the project as a 3MF file." msgstr "Tai eksportuoja projektą kaip 3MF failą." msgid "Export slicing data" msgstr "Eksportuoti sluoksniavimo duomenis" msgid "Export slicing data to a folder" msgstr "Eksportuoti pjaustymo duomenis į aplanką." msgid "Load slicing data" msgstr "Įkelti sluoksniavimo duomenis" msgid "Load cached slicing data from directory." msgstr "Įkelti į talpyklą įrašytus sluoksniavimo duomenis iš katalogo." msgid "Export STL" msgstr "Eksportuoti STL" msgid "Export the objects as single STL." msgstr "Eksportuoti visus objektus kaip vieną STL." msgid "Export multiple STLs" msgstr "Eksportuoti kaip kelis STL" msgid "Export the objects as multiple STLs to directory." msgstr "Eksportuokite objektus kaip kelis STL į katalogą." msgid "Slice the plates: 0-all plates, i-plate i, others-invalid" msgstr "Sluoksniuoti plokštes: 0 – visos plokštės, i – „i“ plokštė, kitos – netinkamos" msgid "This shows command help." msgstr "Tai rodo komandų pagalbą." msgid "UpToDate" msgstr "Atnaujinta" msgid "Update the config values of 3MF to latest." msgstr "Atnaujinti 3MF konfigūracijos reikšmes į naujausias." msgid "Load default filaments" msgstr "Įkelti numatytąsias gijas" msgid "Load first filament as default for those not loaded." msgstr "Įkelti pirmąją giją kaip numatytąją toms gijoms, kurios nėra įkeltos." msgid "Minimum save" msgstr "Minimalus išsaugojimas" msgid "Export 3MF with minimum size." msgstr "Eksportuoti mažiausio dydžio 3MF." msgid "mtcpp" msgstr "mtcpp" msgid "max triangle count per plate for slicing" msgstr "Maksimalus trikampių skaičius vienoje plokštėje pjaustymui." msgid "mstpp" msgstr "mstpp" msgid "max slicing time per plate in seconds" msgstr "Maksimalus pjaustymo laikas vienai plokštei (sekundėmis)." msgid "No check" msgstr "Netikrinama" msgid "Do not run any validity checks, such as G-code path conflicts check." msgstr "Nevykdyti jokių tinkamumo patikrinimų, pavyzdžiui, G-kodo (G-code) trajektorijų konfliktų patikros." msgid "Normative check" msgstr "Normatyvinė patikra" msgid "Check the normative items." msgstr "Patikrinti norminius elementus." msgid "Output Model Info" msgstr "Išvesti modelio informaciją" msgid "This outputs the model’s information." msgstr "Tai išveda modelio informaciją." msgid "Export Settings" msgstr "Eksportavimo nustatymai" msgid "This exports settings to a file." msgstr "Tai eksportuoja nustatymus į failą." msgid "Send progress to pipe" msgstr "Siųsti pažangą į kanalą" msgid "Send progress to pipe." msgstr "Siųsti pažangą į kanalą." msgid "Arrange Options" msgstr "Išdėstymo parinktys" msgid "Arrange options: 0-disable, 1-enable, others-auto" msgstr "Išdėstymo parinktys: 0 – išjungti, 1 – įjungti, kitos – automatiškai" msgid "Repetition count" msgstr "Pakartojimų skaičius" msgid "Repetition count of the whole model." msgstr "Viso modelio pakartojimų skaičius." msgid "Ensure on bed" msgstr "Užtikrinti ant pagrindo" msgid "Lift the object above the bed when it is partially below. Disabled by default." msgstr "Pakelti daiktą virš pagrindo, kai jis iš dalies yra žemiau. Pagal numatytuosius nustatymus išjungta." msgid "Arrange the supplied models in a plate and merge them in a single model in order to perform actions once." msgstr "Išdėstyti pateiktus modelius plokštėje ir sujungti juos į vieną modelį, kad veiksmai būtų atliekami vienu metu." msgid "Convert Unit" msgstr "Konvertuoti vienetus" msgid "Convert the units of model." msgstr "Konvertuoti modelio matavimo vienetus." msgid "Orient Options" msgstr "Orientacijos parinktys" msgid "Orient options: 0-disable, 1-enable, others-auto" msgstr "Orientacijos parinktys: 0 – išjungti, 1 – įjungti, kitos – automatiškai" msgid "Rotation angle around the Z axis in degrees." msgstr "Sukimosi kampas aplink Z ašį laipsniais." msgid "Rotate around X" msgstr "Pasukti aplink X ašį" msgid "Rotation angle around the X axis in degrees." msgstr "Pasukimo kampas aplink X ašį laipsniais." msgid "Rotate around Y" msgstr "Pasukti aplink Y ašį" msgid "Rotation angle around the Y axis in degrees." msgstr "Sukimosi kampas aplink Y ašį laipsniais." msgid "Scale the model by a float factor." msgstr "Keisti modelio mastelį pagal slankiojo kablelio koeficientą." msgid "Load General Settings" msgstr "Įkelti bendruosius nustatymus" msgid "Load process/machine settings from the specified file." msgstr "Įkelti proceso / mašinos nustatymus iš nurodyto failo." msgid "Load Filament Settings" msgstr "Įkelti gijų nustatymus" msgid "Load filament settings from the specified file list." msgstr "Įkelti gijos nustatymus iš nurodyto failų sąrašo." msgid "Skip Objects" msgstr "Praleisti objektus" msgid "Skip some objects in this print." msgstr "Praleisti kai kuriuos šio spausdinimo objektus." msgid "Clone Objects" msgstr "Klonuoti objektus" msgid "Clone objects in the load list." msgstr "Klonuoti įkėlimo sąraše esančius objektus." msgid "Load uptodate process/machine settings when using uptodate" msgstr "Naudojant „UpToDate“, įkelti naujausius proceso / mašinos nustatymus" msgid "load up-to-date process/machine settings from the specified file when using up-to-date" msgstr "Įkelti naujausius proceso/įrenginio nustatymus iš nurodyto failo, kai naudojama parinktis „naujausi“ (angl. \"up-to-date\")." msgid "Load uptodate filament settings when using uptodate" msgstr "Naudojant „UpToDate“, įkelti naujausius gijos nustatymus" msgid "Load uptodate filament settings from the specified file when using uptodate." msgstr "Naudojant „UpToDate“, įkelti naujausius gijos nustatymus iš nurodyto failo." msgid "Downward machines check" msgstr "Atgalinio mašinų suderinamumo patikra" msgid "If enabled, check whether current machine downward compatible with the machines in the list." msgstr "Jei įjungta, tikrinama, ar dabartinė mašina yra suderinama atgaline tvarka su sąraše esančiomis mašinomis." msgid "Downward machines settings" msgstr "Atgalinio mašinų suderinamumo nustatymai" msgid "The machine settings list needs to do downward checking." msgstr "Mašinos nustatymų sąrašas, kuriam reikia atlikti atgalinio suderinamumo patikrą." msgid "Load assemble list" msgstr "Įkelti surinkimo sąrašą" msgid "Load assemble object list from config file." msgstr "Įkelti surinkimo objektų sąrašą iš konfigūracijos failo." msgid "Data directory" msgstr "Duomenų katalogas" msgid "Load and store settings at the given directory. This is useful for maintaining different profiles or including configurations from a network storage." msgstr "Įkelti ir išsaugoti nustatymus nurodytame kataloge. Tai naudinga norint išlaikyti skirtingus profilius arba įtraukti konfigūracijas iš tinklo saugyklos." msgid "Output directory" msgstr "Išvesties katalogas" msgid "This is the output directory for exported files." msgstr "Tai yra eksportuotų failų išvesties aplankas." msgid "Debug level" msgstr "Derinimo lygis" msgid "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:trace\n" msgstr "" "Nustato derinimo žurnalų lygį. 0: kritinis, 1: klaida, 2: įspėjimas, 3: informacija, 4: derinimas, 5: sekimas\n" "\n" msgid "Log file" msgstr "Žurnalo failas" msgid "Redirects debug logging to file.\n" msgstr "Nukreipia derinimo žurnalų įrašymą į failą.\n" msgid "Enable timelapse for print" msgstr "Įjungti laiko intervalų (timelapse) fotografavimą spausdinimui" msgid "If enabled, this slicing will be considered using timelapse." msgstr "Jei įjungta, šis sluoksniavimas bus pritaikytas laiko intervalų (timelapse) fotografavimui." msgid "Load custom G-code" msgstr "Įkelti pasirinktinį G-kodą" msgid "Load custom G-code from json." msgstr "Įkelti pasirinktinį G kodą iš json." msgid "Load filament IDs" msgstr "Įkelti gijų ID" msgid "Load filament IDs for each object." msgstr "Įkelti kiekvieno objekto gijų ID." msgid "Allow multiple colors on one plate" msgstr "Leisti skirtingas spalvas ant tos pačios plokštės" msgid "If enabled, Arrange will allow multiple colors on one plate." msgstr "Jei įjungta, išdėstymas leis kelias spalvas ant vienos plokštės." msgid "Allow rotation when arranging" msgstr "Išdėstant leisti pasukti" msgid "If enabled, Arrange will allow rotation when placing objects." msgstr "Jei įjungta, išdėstant objektus bus leidžiami pasukimai." msgid "Avoid extrusion calibrate region when arranging" msgstr "Išdėstant vengti išspaudimo (extrusion) kalibravimo srities" msgid "If enabled, Arrange will avoid extrusion calibrate region when placing objects." msgstr "Jei įjungta, išdėstymo funkcija vengs išspaudimo (extrusion) kalibravimo srities, kai išdėstys objektus." msgid "Skip modified G-code in 3MF" msgstr "Praleisti modifikuotą G-kodą (G-code) 3MF failuose" msgid "Skip the modified G-code in 3MF from printer or filament presets." msgstr "Praleisti modifikuotą G-kodą (G-code) 3MF faile iš spausdintuvo arba gijos profilių." msgid "MakerLab name" msgstr "MakerLab pavadinimas" msgid "MakerLab name to generate this 3MF." msgstr "„MakerLab“ pavadinimas šiam 3MF generuoti." msgid "MakerLab version" msgstr "„MakerLab“ versija" msgid "MakerLab version to generate this 3MF." msgstr "„MakerLab“ versija šiam 3MF generuoti." msgid "Metadata name list" msgstr "Metaduomenų pavadinimų sąrašas" msgid "Metadata name list added into 3MF." msgstr "Į 3MF įtrauktų metaduomenų pavadinimų sąrašas." msgid "Metadata value list" msgstr "Metaduomenų reikšmių sąrašas" msgid "Metadata value list added into 3MF." msgstr "Į 3MF įtrauktų metaduomenų reikšmių sąrašas." msgid "Allow 3MF with newer version to be sliced" msgstr "Leisti 3MF su naujesne versija sluoksniuoti" msgid "Allow 3MF with newer version to be sliced." msgstr "Leisti sluoksniuoti 3MF su naujesne versija." msgid "Current Z-hop" msgstr "Dabartinis Z-pakėlimas (Z-hop)" msgid "Contains Z-hop present at the beginning of the custom G-code block." msgstr "Apima Z-pakėlimą (Z-hop), esantį pasirinktinio G-kodo (G-code) bloko pradžioje." msgid "Position of the extruder at the beginning of the custom G-code block. If the custom G-code travels somewhere else, it should write to this variable so OrcaSlicer knows where it travels from when it gets control back." msgstr "Ekstruderio padėtis pasirinktinio G-kodo (G-code) bloko pradžioje. Jei pasirinktinis G-kodas atlieka judėjimą kitur, jis turėtų įrašyti reikšmę į šį kintamąjį, kad „OrcaSlicer“ žinotų pradinį tašką, kai valdymas bus grąžintas programai." msgid "Retraction state at the beginning of the custom G-code block. If the custom G-code moves the extruder axis, it should write to this variable so OrcaSlicer de-retracts correctly when it gets control back." msgstr "Gijos įtraukimo (retraction) būsena pasirinktinio G-kodo (G-code) bloko pradžioje. Jei pasirinktinis G-kodas judina ekstruderio ašį, jis turėtų įrašyti reikšmę į šį kintamąjį, kad „OrcaSlicer“ teisingai atliktų gijos pastūmimą (de-retract), kai valdymas bus grąžintas programai." msgid "Extra de-retraction" msgstr "Papildomas pastūmimas po įtraukimo (extra de-retraction)" msgid "Currently planned extra extruder priming after de-retraction." msgstr "Šiuo metu numatytas papildomas ekstruderio užpildymas (priming) po gijos pastūmimo (de-retraction)." msgid "Absolute E position" msgstr "Absoliuti E padėtis" msgid "Current position of the extruder axis. Only used with absolute extruder addressing." msgstr "Dabartinė ekstruderio ašies padėtis. Naudojama tik esant absoliučiajam ekstruderio koordinavimui." msgid "Current extruder" msgstr "Dabartinis ekstruderis" msgid "Zero-based index of currently used extruder." msgstr "Dabartinio ekstruderio indeksas, skaičiuojamas nuo nulio." msgid "Current object index" msgstr "Dabartinio objekto indeksas" msgid "Specific for sequential printing. Zero-based index of currently printed object." msgstr "Specifinė nuoseklaus spausdinimo informacija. Šiuo metu spausdinamo objekto indeksas, skaičiuojamas nuo nulio." msgid "Has wipe tower" msgstr "Turi valymo bokštelį" msgid "Whether or not wipe tower is being generated in the print." msgstr "Ar spausdinant yra generuojamas valymo bokštelis." msgid "Initial extruder" msgstr "Pradinis ekstruderis" msgid "Zero-based index of the first extruder used in the print. Same as initial_tool." msgstr "Pirmojo spausdinimui naudojamo ekstruderio indeksas, skaičiuojamas nuo nulio. Toks pat kaip „initial_tool“." msgid "Initial tool" msgstr "Pradinis įrankis" msgid "Zero-based index of the first extruder used in the print. Same as initial_extruder." msgstr "Pirmojo spausdinimui naudojamo ekstruderio indeksas, skaičiuojamas nuo nulio. Toks pat kaip „initial_extruder“." msgid "Is extruder used?" msgstr "Ar naudojamas ekstruderis?" msgid "Vector of booleans stating whether a given extruder is used in the print." msgstr "Loginių reikšmių vektorius, nurodantis, ar spausdinant naudojamas tam tikras ekstruderis." msgid "Number of extruders" msgstr "Ekstruderių skaičius" msgid "Total number of extruders, regardless of whether they are used in the current print." msgstr "Bendras ekstruderių skaičius, neatsižvelgiant į tai, ar jie naudojami dabartiniame spausdinime." msgid "Has single extruder MM priming" msgstr "Turi vieno ekstruderio MM užpildymą (MM priming)" msgid "Are the extra multi-material priming regions used in this print?" msgstr "Ar šiame spaudinyje naudojamos papildomos kelių medžiagų užpildymo (priming) sritys?" msgid "Volume per extruder" msgstr "Vieno ekstruderio tūris" msgid "Total filament volume extruded per extruder during the entire print." msgstr "Bendras gijos tūris, išspaustas (extruded) kiekvienu ekstruderiu per visą spausdinimo procesą." msgid "Total tool changes" msgstr "Bendras įrankių keitimų skaičius" msgid "Number of tool changes during the print." msgstr "Spausdinimo metu atliktų įrankių pakeitimų skaičius." msgid "Total volume" msgstr "Bendras tūris" msgid "Total volume of filament used during the entire print." msgstr "Bendras viso spausdinimo metu sunaudotas gijos tūris." msgid "Weight per extruder" msgstr "Svoris vienam ekstruderiui" msgid "Weight per extruder extruded during the entire print. Calculated from filament_density value in Filament Settings." msgstr "Kiekvienu ekstruderiu išspaustas (extruded) gijos svoris per visą spausdinimo procesą. Apskaičiuojama pagal „filament_density“ reikšmę Gijos nustatymuose." msgid "Total weight" msgstr "Bendras svoris" msgid "Total weight of the print. Calculated from filament_density value in Filament Settings." msgstr "Bendras spaudinio svoris. Apskaičiuojama pagal „filament_density“ reikšmę Gijos nustatymuose." msgid "Total layer count" msgstr "Bendras sluoksnių skaičius" msgid "Number of layers in the entire print." msgstr "Viso spaudinio sluoksnių skaičius." msgid "Print time (normal mode)" msgstr "Spausdinimo laikas (normalus režimas)" msgid "Estimated print time when printed in normal mode (i.e. not in silent mode). Same as print_time." msgstr "Numatomas spausdinimo laikas, kai spausdinama normaliu režimu (t. y. ne tyliuoju režimu). Toks pat kaip „print_time“." msgid "Estimated print time when printed in normal mode (i.e. not in silent mode). Same as normal_print_time." msgstr "Numatomas spausdinimo laikas, kai spausdinama normaliu režimu (t. y. ne tyliuoju režimu). Toks pat kaip „normal_print_time“." msgid "Print time (silent mode)" msgstr "Spausdinimo laikas (tylusis režimas)" msgid "Estimated print time when printed in silent mode." msgstr "Numatomas spausdinimo laikas, kai spausdinama tyliuoju režimu." msgid "Total cost of all material used in the print. Calculated from filament_cost value in Filament Settings." msgstr "Bendros visų spausdinimui sunaudotų medžiagų sąnaudos. Apskaičiuojama pagal „filament_cost“ reikšmę Gijos nustatymuose." msgid "Total wipe tower cost" msgstr "Bendros valymo bokštelio sąnaudos" msgid "Total cost of the material wasted on the wipe tower. Calculated from filament_cost value in Filament Settings." msgstr "Bendros valymo bokšteliui sunaudotos gijos sąnaudos. Apskaičiuojama pagal „filament_cost“ reikšmę Gijos nustatymuose." msgid "Wipe tower volume" msgstr "Valymo bokštelio tūris" msgid "Total filament volume extruded on the wipe tower." msgstr "Bendras gijos tūris, išspaustas (extruded) ant valymo bokštelio." msgid "Used filament" msgstr "Naudota gija" msgid "Total length of filament used in the print." msgstr "Bendras viso spausdinimo metu sunaudotos gijos ilgis." msgid "Print time (seconds)" msgstr "Spausdinimo laikas (sekundėmis)" msgid "Total estimated print time in seconds. Replaced with actual value during post-processing." msgstr "Bendras numatomas spausdinimo laikas sekundėmis. Papildomo apdorojimo (post-processing) metu pakeičiama faktine reikšme." msgid "Filament length (meters)" msgstr "Gijos ilgis (metrais)" msgid "Total filament length used in meters. Replaced with actual value during post-processing." msgstr "Bendras sunaudotos gijos ilgis metrais. Papildomo apdorojimo (post-processing) metu pakeičiama faktine reikšme." msgid "Number of objects" msgstr "Objektų skaičius" msgid "Total number of objects in the print." msgstr "Bendras atspausdintų objektų skaičius." msgid "Number of instances" msgstr "Egzempliorių skaičius" msgid "Total number of object instances in the print, summed over all objects." msgstr "Bendras atspausdintų objektų egzempliorių skaičius, sumuojamas visiems objektams." msgid "Scale per object" msgstr "Mastelis pagal objektą" msgid "" "Contains a string with the information about what scaling was applied to the individual objects. Indexing of the objects is zero-based (first object has index 0).\n" "Example: 'x:100% y:50% z:100%'." msgstr "" "Pateikiama eilutė su informacija apie tai, koks mastelio keitimas buvo pritaikytas atskiriems objektams. Objektai indeksuojami nuo nulio (pirmasis objektas turi indeksą 0).\n" "Pavyzdys: \"x:100% y:50% z:100%\"." msgid "Input filename without extension" msgstr "Įvesties failo pavadinimas be plėtinio" msgid "Source filename of the first object, without extension." msgstr "Pirmojo objekto šaltinio failo pavadinimas be plėtinio." msgid "The vector has two elements: X and Y coordinate of the point. Values in mm." msgstr "Vektorių sudaro du elementai: taško x ir y koordinatės. Vertės mm." msgid "The vector has two elements: X and Y dimension of the bounding box. Values in mm." msgstr "Vektorių sudaro du elementai: x ir y ribojančio bloko matmenys. Reikšmės mm." msgid "First layer convex hull" msgstr "Pirmojo sluoksnio išgaubtasis korpusas" msgid "Vector of points of the first layer convex hull. Each element has the following format:'[x, y]' (x and y are floating-point numbers in mm)." msgstr "Pirmojo sluoksnio išgaubtojo korpuso taškų vektorius. Kiekvienas elementas yra tokio formato: \"[x, y]\" (x ir y yra slankiojo kablelio skaičiai mm)." msgid "Bottom-left corner of the first layer bounding box" msgstr "Pirmojo sluoksnio ribų lango apatinis kairysis kampas" msgid "Top-right corner of the first layer bounding box" msgstr "Pirmojo sluoksnio ribų lango viršutinis dešinysis kampas" msgid "Size of the first layer bounding box" msgstr "Pirmojo sluoksnio ribų lango dydis" msgid "Bottom-left corner of print bed bounding box" msgstr "Spausdinimo pagrindo ribų lango apatinis kairysis kampas" msgid "Top-right corner of print bed bounding box" msgstr "Viršutinis dešinysis spausdinimo pagrindo ribų lango kampas" msgid "Size of the print bed bounding box" msgstr "Spausdinimo pagrindo ribojančio lango dydis" msgid "Timestamp" msgstr "Laiko žyma" msgid "String containing current time in yyyyMMdd-hhmmss format." msgstr "Eilutė, kurioje nurodomas dabartinis laikas formatu yyyyMMdd-hhmmss." msgid "Day" msgstr "Diena" msgid "Hour" msgstr "Valanda" msgid "Minute" msgstr "Minutė" msgid "Second" msgstr "Sekundė" msgid "Print preset name" msgstr "Spausdinimo profilio pavadinimas" msgid "Name of the print preset used for slicing." msgstr "Sluoksniavimui naudojamo spausdinimo profilio pavadinimas." msgid "Filament preset name" msgstr "Gijos profilio pavadinimas" msgid "Names of the filament presets used for slicing. The variable is a vector containing one name for each extruder." msgstr "Sluoksniavimui naudojamų gijos profilių pavadinimai. Šis kintamasis yra vektorius, kuriame yra po vieną pavadinimą kiekvienam ekstruderiui." msgid "Printer preset name" msgstr "Spausdintuvo profilio pavadinimas" msgid "Name of the printer preset used for slicing." msgstr "Sluoksniavimui naudojamo spausdintuvo profilio pavadinimas." msgid "Physical printer name" msgstr "Fizinio spausdintuvo pavadinimas" msgid "Name of the physical printer used for slicing." msgstr "Fizinio spausdintuvo, naudojamo sluoksniavimui, pavadinimas." msgid "Layer number" msgstr "Sluoksnio numeris" msgid "Index of the current layer. One-based (i.e. first layer is number 1)." msgstr "Dabartinio sluoksnio indeksas, skaičiuojamas nuo vieneto (t. y. pirmasis sluoksnis yra Nr. 1)." msgid "Layer Z" msgstr "Sluoksnio Z aukštis" msgid "Height of the current layer above the print bed, measured to the top of the layer." msgstr "Dabartinio sluoksnio aukštis virš spausdinimo pagrindo, matuojamas iki sluoksnio viršaus." msgid "Maximal layer Z" msgstr "Didžiausias sluoksnio Z aukštis" msgid "Height of the last layer above the print bed." msgstr "Paskutinio sluoksnio aukštis virš spausdinimo pagrindo." msgid "Filament extruder ID" msgstr "Gijos ekstruderio ID" msgid "The current extruder ID. The same as current_extruder." msgstr "Dabartinis ekstruderio ID. Toks pat kaip current_extruder." msgid "Error in zip archive" msgstr "Klaida zip archyve" msgid "Generating walls" msgstr "Sienelių generavimas" msgid "Generating infill regions" msgstr "Užpildo sričių generavimas" msgid "Generating infill toolpath" msgstr "Užpildo įrankio trajektorijos (toolpath) generavimas" msgid "Detect overhangs for auto-lift" msgstr "Aptikti iškyšas automatiniam pakėlimui" msgid "Checking support necessity" msgstr "Atramų reikalingumo tikrinimas" msgid "floating regions" msgstr "ore kabančių sričių" msgid "floating cantilever" msgstr "ore kabančią konstrukciją" msgid "large overhangs" msgstr "didelių iškyšų" #, c-format, boost-format msgid "It seems object %s has %s. Please re-orient the object or enable support generation." msgstr "Atrodo, kad objektas %s turi %s. Prašome perorientuoti objektą arba įjungti atramų generavimą." msgid "Generating support" msgstr "Atramų generavimas" msgid "Optimizing toolpath" msgstr "Įrankių trajektorijų optimizavimas" msgid "Slicing mesh" msgstr "Figūros sluoksniavimas" msgid "No layers were detected. You might want to repair your STL file(s) or check their size or thickness and retry.\n" msgstr "Sluoksnių neaptikta. Galbūt reikėtų pataisyti STL failą (-us) arba patikrinti jų dydį ar storį ir bandyti dar kartą.\n" msgid "" "An object's XY size compensation will not be used because it is also color-painted.\n" "XY Size compensation cannot be combined with color-painting." msgstr "" "Objekto XY dydžio kompensavimas nebus naudojamas, nes objektas taip pat yra spalvotas.\n" "XY dydžio kompensavimas negali būti derinamas su spalviniu dažymu." msgid "" "An object has enabled XY Size compensation which will not be used because it is also fuzzy skin painted.\n" "XY Size compensation cannot be combined with fuzzy skin painting." msgstr "" "Objektui įjungtas XY dydžio kompensavimas nebus naudojamas, nes parinkta ir grublėto paviršiaus (fuzzy skin) sritis. \n" "XY dydžio kompensavimo negalima derinti su grublėto paviršiaus (fuzzy skin) dažymu." msgid "Object name" msgstr "Objekto pavadinimas" msgid "Support: generate contact points" msgstr "Atramos: generuoti kontaktinius taškus" msgid "Loading of a model file failed." msgstr "Nepavyko įkelti modelio failo." msgid "Meshing of a model file failed or no valid shape." msgstr "Nepavyko suformuoti modelio failo poligonažo arba jame nėra tinkamos geometrijos." msgid "The supplied file couldn't be read because it's empty." msgstr "Pateikto failo nepavyko nuskaityti, nes jis yra tuščias." msgid "Unknown file format: input file must have .stl, .obj, or .amf(.xml) extension." msgstr "Nežinomas failo formatas: įvesties failas privalo turėti .stl, .obj arba .amf(.xml) plėtinį." msgid "Unknown file format: input file must have .3mf or .zip.amf extension." msgstr "Nežinomas failo formatas: įvesties failas privalo turėti .3mf arba .zip.amf plėtinį." msgid "load_obj: failed to parse" msgstr "load_obj: nepavyko apdoroti" msgid "load mtl in obj: failed to parse" msgstr "įkelti mtl į obj: nepavyko apdoroti" msgid "The file contains polygons with more than 4 vertices." msgstr "Faile yra daugiakampių, turinčių daugiau nei 4 viršūnes." msgid "The file contains polygons with less than 2 vertices." msgstr "Faile yra daugiakampių, turinčių mažiau nei 2 viršūnes." msgid "The file contains invalid vertex index." msgstr "Faile yra neteisingas viršūnių indeksas." msgid "This OBJ file couldn't be read because it's empty." msgstr "Šio OBJ failo nepavyko perskaityti, nes jis tuščias." msgid "Max Volumetric Speed Calibration" msgstr "Didžiausio tūrinio greičio kalibravimas" msgid "Manage Result" msgstr "Tvarkyti rezultatus" msgid "Manual Calibration" msgstr "Rankinis kalibravimas" msgid "Result can be read by human eyes." msgstr "Rezultatą galima nustatyti žmogaus akimis." msgid "Auto-Calibration" msgstr "Automatinis kalibravimas" msgid "We would use Lidar to read the calibration result" msgstr "Kalibravimo rezultatams nuskaityti naudotume LiDAR jutiklį (Lidar)" msgid "Prev" msgstr "Atgal" msgid "Recalibration" msgstr "Perkalibruoti" msgid "Calibrate" msgstr "Kalibruoti" msgid "Finish" msgstr "Baigti" msgid "How can I use calibration results?" msgstr "Kaip galiu panaudoti kalibravimo rezultatus?" msgid "You could change the Flow Dynamics Calibration Factor in material editing" msgstr "Srauto dinamikos kalibravimo koeficientą (Flow Dynamics Calibration Factor) galite pakeisti redaguodami medžiagą" msgid "" "The current firmware version of the printer does not support calibration.\n" "Please upgrade the printer firmware." msgstr "" "Dabartinė spausdintuvo programinės įrangos versija nepalaiko kalibravimo.\n" "Atnaujinkite spausdintuvo programinę įrangą." msgid "Calibration not supported" msgstr "Kalibravimas nepalaikomas" msgid "Flow Dynamics" msgstr "Srauto dinamika" msgid "Max Volumetric Speed" msgstr "Didžiausias tūrinis greitis" #, c-format, boost-format msgid "" "Please input valid values:\n" "Start value: >= %.1f\n" "End value: <= %.1f\n" "End value: > Start value\n" "Value step: >= %.3f" msgstr "" "Įveskite tinkamas reikšmes:\n" "Pradinė reikšmė: >= %.1f\n" "Galutinė reikšmė: <= %.1f\n" "Galutinė reikšmė: > Pradinė reikšmė\n" "Reikšmės žingsnis: >= %.3f" msgid "The name cannot be empty." msgstr "Pavadinimas negali būti tuščias." #, c-format, boost-format msgid "The selected preset: %s was not found." msgstr "Pasirinktas profilis %s nerastas." msgid "The name cannot be the same as the system preset name." msgstr "Pavadinimas negali sutapti su sistemos profilio pavadinimu." msgid "The name is the same as another existing preset name" msgstr "Pavadinimas sutampa su kito jau esamo profilio pavadinimu" msgid "create new preset failed." msgstr "sukurti naują profilį nepavyko." #, c-format, boost-format msgid "Could not find parameter: %s." msgstr "Nepavyko rasti parametro: %s." msgid "Are you sure to cancel the current calibration and return to the home page?" msgstr "Ar tikrai norite atšaukti dabartinį kalibravimą ir grįžti į pagrindinį puslapį?" msgid "No Printer Connected!" msgstr "Nėra prijungto spausdintuvo!" msgid "Printer is not connected yet." msgstr "Spausdintuvas dar neprijungtas." msgid "Please select filament to calibrate." msgstr "Pasirinkite giją, kurią norite kalibruoti." msgid "The input value size must be 3." msgstr "Įvesties reikšmės dydis turi būti 3." msgid "" "This machine type can only hold 16 historical results per nozzle. You can delete the existing historical results and then start calibration. Or you can continue the calibration, but you cannot create new calibration historical results.\n" "Do you still want to continue the calibration?" msgstr "" "Šio tipo įrenginyje vienam purkštukui galima išsaugoti tik 16 istorinių rezultatų. Galite ištrinti esamus istorinius rezultatus ir tada pradėti kalibravimą. Arba galite tęsti kalibravimą, tačiau negalėsite sukurti naujų kalibravimo istorinių rezultatų.\n" "Ar vis tiek norite tęsti kalibravimą?" #, c-format, boost-format msgid "Only one of the results with the same name: %s will be saved. Are you sure you want to override the other results?" msgstr "Bus išsaugotas tik vienas iš rezultatų tuo pačiu pavadinimu: %s. Ar tikrai norite perrašyti kitus rezultatus?" #, c-format, boost-format msgid "There is already a previous calibration result with the same name: %s. Only one result with a name is saved. Are you sure you want to overwrite the previous result?" msgstr "Jau yra ankstesnis kalibravimo rezultatas tokiu pačiu pavadinimu: %s. Išsaugomas tik vienas rezultatas su tokiu pavadinimu. Ar tikrai norite perrašyti ankstesnį rezultatą?" #, c-format, boost-format msgid "" "Within the same extruder, the name(%s) must be unique when the filament type, nozzle diameter, and nozzle flow are the same.\n" "Are you sure you want to override the historical result?" msgstr "" "Tam pačiam ekstruderiui pavadinimas (%s) turi būti unikalus, kai gijos tipas, purkštuko skersmuo ir purkštuko srautas sutampa.\n" "Ar tikrai norite perrašyti ankstesnį rezultatą?" #, c-format, boost-format msgid "This machine type can only hold %d historical results per nozzle. This result will not be saved." msgstr "Šio tipo įrenginyje vienam purkštukui galima išsaugoti tik %d istorinių rezultatų. Šis rezultatas nebus išsaugotas." msgid "Connecting to printer..." msgstr "Jungiamasi prie spausdintuvo..." msgid "The failed test result has been dropped." msgstr "Nepavykusio testo rezultatas buvo panaikintas." msgid "Flow Dynamics Calibration result has been saved to the printer." msgstr "Srauto dinamikos kalibravimo rezultatas išsaugotas spausdintuve." msgid "Internal Error" msgstr "Vidinė klaida" msgid "Please select at least one filament for calibration" msgstr "Kalibravimui pasirinkite bent vieną giją" msgid "Flow rate calibration result has been saved to preset." msgstr "Srauto greičio kalibravimo rezultatas įrašytas į profilį." msgid "Max volumetric speed calibration result has been saved to preset." msgstr "Maksimalaus tūrinio greičio kalibravimo rezultatas įrašytas į profilį." msgid "When do you need Flow Dynamics Calibration" msgstr "Kada jums reikia srauto dinamikos kalibravimo" msgid "" "We now have added the auto-calibration for different filaments, which is fully automated and the result will be saved into the printer for future use. You only need to do the calibration in the following limited cases:\n" "1. If you introduce a new filament of different brands/models or the filament is damp;\n" "2. If the nozzle is worn out or replaced with a new one;\n" "3. If the max volumetric speed or print temperature is changed in the filament setting." msgstr "" "Dabar pridėjome automatinį kalibravimą skirtingoms gijoms, kuris yra visiškai automatizuotas, o rezultatas bus išsaugotas spausdintuve ateities naudojimui. Kalibravimą reikia atlikti tik šiais ribotais atvejais:\n" "1. Jei naudojate naują skirtingos markės/modelio giją arba gija yra drėgna;\n" "2. Jei purkštukas yra susidėvėjęs arba pakeistas nauju;\n" "3. Jei gijos nustatymuose pakeistas maksimalus tūrinis greitis arba spausdinimo temperatūra." msgid "About this calibration" msgstr "Apie šį kalibravimą" msgid "" "Please find the details of Flow Dynamics Calibration from our wiki.\n" "\n" "Usually the calibration is unnecessary. When you start a single color/material print, with the \"flow dynamics calibration\" option checked in the print start menu, the printer will follow the old way, calibrate the filament before the print; When you start a multi color/material print, the printer will use the default compensation parameter for the filament during every filament switch which will have a good result in most cases.\n" "\n" "Please note that there are a few cases that can make the calibration results unreliable, such as insufficient adhesion on the build plate. Improving adhesion can be achieved by washing the build plate or applying glue. For more information on this topic, please refer to our Wiki.\n" "\n" "The calibration results have about 10 percent jitter in our test, which may cause the result not exactly the same in each calibration. We are still investigating the root cause to do improvements with new updates." msgstr "" "Išsamią informaciją apie srauto dinamikos kalibravimą rasite mūsų wiki.\n" "\n" "Paprastai kalibravimas nebūtinas. Kai pradedate spausdinti vienos spalvos / medžiagos spaudinį, spausdinimo pradžios meniu pažymėjus parinktį \"Srauto dinamikos kalibravimas\", spausdintuvas vadovausis senuoju būdu ir prieš spausdinimą sukalibruos giją; kai pradedate spausdinti kelių spalvų / medžiagos spaudinį, spausdintuvas kiekvieno gijos perjungimo metu naudos numatytąjį gijos kompensavimo parametrą, kuris daugeliu atvejų duos gerą rezultatą.\n" "\n" "Atkreipkite dėmesį, kad yra keletas atvejų, dėl kurių kalibravimo rezultatai gali būti nepatikimi, pavyzdžiui, nepakankamas sukibimas su pagrindo plokšte. Pagerinti sukibimą galima nuplaunant pagrindo plokštę arba užtepant klijų. Daugiau informacijos šia tema rasite mūsų \"Wiki\".\n" "\n" "Mūsų bandyme kalibravimo rezultatai turi apie 10 proc. svyravimų, todėl kiekvieno kalibravimo rezultatai gali būti ne visiškai vienodi. Mes vis dar tiriame pagrindinę priežastį, kad galėtume atlikti patobulinimus su naujais atnaujinimais." msgid "When to use Flow Rate Calibration" msgstr "Kada naudoti srauto greičio kalibravimą" msgid "" "After using Flow Dynamics Calibration, there might still be some extrusion issues, such as:\n" "1. Over-Extrusion: Excess material on your printed object, forming blobs or zits, or the layers seem thicker than expected and not uniform\n" "2. Under-Extrusion: Very thin layers, weak infill strength, or gaps in the top layer of the model, even when printing slowly\n" "3. Poor Surface Quality: The surface of your prints seems rough or uneven\n" "4. Weak Structural Integrity: Prints break easily or don't seem as sturdy as they should be" msgstr "" "Panaudojus srauto dinamikos kalibravimą, vis dar gali kilti išspaudimo (extrusion) problemų, pvz.:\n" "1. Per didelis išspaudimas (extrusion): ant spausdinamo objekto atsiranda medžiagos perteklius, susidaro dėmės ar taškeliai arba sluoksniai atrodo storesni nei tikėtasi ir netolygūs.\n" "2. Nepakankamas išspaudimas (extrusion): labai ploni sluoksniai, silpnas užpildo stiprumas arba viršutiniame modelio sluoksnyje esantys tarpai, net kai spausdinama lėtai.\n" "3. Prasta paviršiaus kokybė: spausdinių paviršius atrodo šiurkštus arba nelygus.\n" "4. Silpnas struktūrinis vientisumas: spaudiniai lengvai lūžta arba neatrodo tokie tvirti, kokie turėtų būti." msgid "In addition, Flow Rate Calibration is crucial for foaming materials like LW-PLA used in RC planes. These materials expand greatly when heated, and calibration provides a useful reference flow rate." msgstr "Be to, srauto greičio kalibravimas labai svarbus putojančioms medžiagoms, pavyzdžiui, LW-PLA, naudojamoms RC lėktuvų gamyboje. Šios medžiagos labai išsiplečia, kai yra kaitinamos, o kalibravimas suteikia naudingą etaloninį srauto greitį." msgid "Flow Rate Calibration measures the ratio of expected to actual extrusion volumes. The default setting works well in Bambu Lab printers and official filaments as they were pre-calibrated and fine-tuned. For a regular filament, you usually won't need to perform a Flow Rate Calibration unless you still see the listed defects after you have done other calibrations. For more details, please check out the wiki article." msgstr "Srauto greičio kalibravimas matuoja numatyto ir faktinio išspaudimo (extrusion) tūrio santykį. Numatytasis nustatymas gerai veikia „Bambu Lab“ spausdintuvuose ir su oficialiomis gijomis, nes jos iš anksto sukalibruotos ir tiksliai sureguliuotos. Įprastai naudojamoms gijoms paprastai nereikia atlikti srauto greičio kalibravimo, nebent atlikus kitus kalibravimus vis dar matote išvardytus defektus. Išsamesnės informacijos rasite „Wiki“ straipsnyje." msgid "" "Auto Flow Rate Calibration utilizes Bambu Lab's Micro-Lidar technology, directly measuring the calibration patterns. However, please be advised that the efficacy and accuracy of this method may be compromised with specific types of materials. Particularly, filaments that are transparent or semi-transparent, have sparkles, or have a highly-reflective finish may not be suitable for this calibration and can produce less-than-desirable results.\n" "\n" "The calibration results may vary between each calibration or filament. We are still improving the accuracy and compatibility of this calibration through firmware updates over time.\n" "\n" "Caution: Flow Rate Calibration is an advanced process, to be attempted only by those who fully understand its purpose and implications. Incorrect usage can lead to sub-par prints or printer damage. Please make sure to carefully read and understand the process before doing it." msgstr "" "Automatinis srauto greičio kalibravimas naudoja „Bambu Lab“ „Micro-Lidar“ technologiją, tiesiogiai matuojančią kalibravimo raštus. Tačiau atkreipkite dėmesį, kad šio metodo efektyvumas ir tikslumas gali suprastėti naudojant tam tikrų tipų medžiagas. Ypač skaidrūs arba pusiau skaidrūs, blizgučių turintys arba itin atspindintį paviršių turintys siūlai gali netikti šiam kalibravimui ir gali duoti nepageidaujamų rezultatų.\n" "\n" "Kalibravimo rezultatai gali skirtis kiekvieno kalibravimo ar siūlo atveju. Mes nuolat tobuliname šio kalibravimo tikslumą ir suderinamumą per programinės įrangos naujinius.\n" "\n" "Įspėjimas: Srauto greičio kalibravimas yra sudėtingas procesas, kurį turėtų bandyti tik tie, kurie visiškai supranta jo paskirtį ir pasekmes. Netinkamas naudojimas gali lemti prastesnės kokybės spaudinius arba spausdintuvo pažeidimus. Prieš atlikdami šį procesą, būtinai atidžiai jį perskaitykite ir supraskite." msgid "When you need Max Volumetric Speed Calibration" msgstr "Kada reikia maksimalaus tūrinio greičio kalibravimo" msgid "Over-extrusion or under extrusion" msgstr "Per didelis arba nepakankamas išspaudimas (extrusion)" msgid "Max Volumetric Speed calibration is recommended when you print with:" msgstr "Maksimalaus tūrinio greičio kalibravimas rekomenduojamas, kai spausdinate su:" msgid "material with significant thermal shrinkage/expansion, such as..." msgstr "medžiaga, kuri smarkiai susitraukia ir (arba) plečiasi, pvz.,..." msgid "materials with inaccurate filament diameter" msgstr "medžiagos su netiksliu gijos skersmeniu" msgid "We found the best Flow Dynamics Calibration Factor" msgstr "Radome geriausią srauto dinamikos kalibravimo koeficientą" msgid "Part of the calibration failed! You may clean the plate and retry. The failed test result would be dropped." msgstr "Dalis kalibravimo nepavyko! Galite nuvalyti pagrindą ir bandyti dar kartą. Nepavykusio bandymo rezultatas bus panaikintas." msgid "*We recommend you to add brand, materia, type, and even humidity level in the Name" msgstr "*Į pavadinimą rekomenduojame įrašyti prekės ženklą, medžiagą, tipą ir net drėgmės lygį" msgid "Please enter the name you want to save to printer." msgstr "Įveskite pavadinimą, kurį norite įrašyti į spausdintuvą." msgid "The name cannot exceed 40 characters." msgstr "Pavadinimas negali būti ilgesnis nei 40 simbolių." # AI Translated msgid "Nozzle ID" msgstr "Purkštuko ID" # AI Translated msgid "Standard Flow" msgstr "Standartinis srautas" msgid "Please find the best line on your plate" msgstr "Raskite geriausią liniją ant pagrindo" msgid "Please find the corner with the perfect degree of extrusion" msgstr "Raskite kampą su tobulu išspaudimo (extrusion) laipsniu" msgid "Input Value" msgstr "Įvesties reikšmė" msgid "Save to Filament Preset" msgstr "Išsaugoti gijos profilyje" msgid "Record Factor" msgstr "Užfiksuoti koeficientą" msgid "We found the best flow ratio for you" msgstr "Radome jums geriausią srauto santykį" msgid "Flow Ratio" msgstr "Srauto santykis" msgid "Please input a valid value (0.0 < flow ratio < 2.0)" msgstr "Įveskite galiojančią reikšmę (0,0 < srauto santykis < 2,0)" msgid "Please enter the name of the preset you want to save." msgstr "Įveskite norimo išsaugoti profilio pavadinimą." msgid "Calibration1" msgstr "1 kalibravimas" msgid "Calibration2" msgstr "2 kalibravimas" msgid "Please find the best object on your plate" msgstr "Raskite geriausią objektą ant pagrindo" msgid "Fill in the value above the block with smoothest top surface" msgstr "Užpildykite reikšmę virš bloko, kurio viršutinis paviršius yra lygiausias" msgid "Skip Calibration2" msgstr "Praleisti 2 kalibravimą" #, c-format, boost-format msgid "flow ratio : %s " msgstr "srauto santykis : %s " msgid "Please choose a block with smoothest top surface." msgstr "Pasirinkite bloką, kurio viršutinis paviršius lygiausias." msgid "Please input a valid value (0 <= Max Volumetric Speed <= 60)" msgstr "Įveskite tinkamą reikšmę (0 <= Maksimalus tūrinis greitis <= 60)" msgid "Calibration Type" msgstr "Kalibravimo tipas" msgid "Complete Calibration" msgstr "Išsamus kalibravimas" msgid "Fine Calibration based on flow ratio" msgstr "Tikslusis kalibravimas pagal srauto santykį" msgid "Title" msgstr "Pavadinimas" msgid "A test model will be printed. Please clear the build plate and place it back to the hot bed before calibration." msgstr "Bus atspausdintas bandomasis modelis. Prieš kalibruodami nuvalykite pagrindą ir padėkite ją atgal į kaitinimo vietą." msgid "Printing Parameters" msgstr "Spausdinimo parametrai" msgid "- ℃" msgstr "- ℃" msgid "Synchronize nozzle and AMS information" msgstr "Sinchronizuoti purkštuko ir AMS informaciją" msgid "Please connect the printer first before synchronizing." msgstr "Prieš sinchronizuodami, pirmiausia prijunkite spausdintuvą." #, c-format, boost-format msgid "Printer %s nozzle information has not been set. Please configure it before proceeding with the calibration." msgstr "Spausdintuvo %s purkštuko informacija nenustatyta. Konfigūruokite ją prieš tęsdami kalibravimą." msgid "AMS and nozzle information are synced" msgstr "AMS ir purkštuko informacija sinchronizuota" msgid "Nozzle Flow" msgstr "Purkštuko srautas" msgid "Filament position" msgstr "Gijos padėtis" msgid "Filament For Calibration" msgstr "Gija kalibravimui" msgid "" "Tips for calibration material:\n" "- Materials that can share same hot bed temperature\n" "- Different filament brand and family (Brand = Bambu, Family = Basic, Matte)" msgstr "" "Patarimai dėl kalibravimo medžiagos: \n" " - Medžiagos, kurios gali turėti tą pačią karšto pagrindo temperatūrą\n" " - Skirtingas gijų prekės ženklas ir šeima (prekės ženklas = Bambu, šeima = Basic, Matte)" msgid "Pattern" msgstr "Raštas" msgid "Method" msgstr "Metodas" #, c-format, boost-format msgid "%s is not compatible with %s" msgstr "%s nesuderinama su %s" msgid "TPU is not supported for Flow Dynamics Auto-Calibration." msgstr "TPU nepalaiko srauto dinamikos automatinio kalibravimo." msgid "Selected nozzle temperatures are incompatible. For multi-material printing, each filament's nozzle temperature must be within the recommended nozzle temperature range of the other filaments. Otherwise, nozzle clogging or printer damage may occur." msgstr "Pasirinktos purkštuko temperatūros yra nesuderinamos. Spausdinant iš kelių medžiagų, kiekvienos gijos purkštuko temperatūra turi patekti į kitų gijų rekomenduojamą purkštuko temperatūros diapazoną. Priešingu atveju gali užsikimšti purkštukas arba sugesti spausdintuvas." msgid "Sync AMS and nozzle information" msgstr "Sinchronizuoti AMS ir purkštuko informaciją" msgid "Calibration only supports cases where the left and right nozzle diameters are identical." msgstr "Kalibravimas palaikomas tik tada, kai kairiojo ir dešiniojo purkštukų skersmenys yra vienodi." msgid "From k Value" msgstr "Nuo k reikšmės" msgid "To k Value" msgstr "Iki k reikšmės" msgid "Step value" msgstr "Žingsnio dydis" msgid "The nozzle diameter has been synchronized from the printer Settings" msgstr "Purkštuko skersmuo buvo sinchronizuotas su spausdintuvo nustatymais" msgid "From Volumetric Speed" msgstr "Nuo tūrinio greičio" msgid "To Volumetric Speed" msgstr "Iki tūrinio greičio" msgid "Are you sure you want to cancel this print?" msgstr "Ar tikrai norite sustabdyti šį spausdinimą?" msgid "Flow Dynamics Calibration Result" msgstr "Srauto dinamikos kalibravimo rezultatai" msgid "New" msgstr "Naujas" msgid "No History Result" msgstr "Nėra ankstesnių rezultatų" msgid "Success to get history result" msgstr "Sėkmingai gauti senesnį rezultatą" msgid "Refreshing the previous Flow Dynamics Calibration records" msgstr "Atnaujinami ankstesni srauto dinamikos kalibravimo įrašai." # AI Translated #, c-format, boost-format msgid "Note: The hotend number on the %s is tied to the holder. When the hotend is moved to a new holder, its number will update automatically." msgstr "Pastaba: kaitinimo bloko numeris įrenginyje %s susietas su laikikliu. Perkėlus kaitinimo bloką į naują laikiklį, jo numeris atsinaujins automatiškai." msgid "Action" msgstr "Veiksmas" #, c-format, boost-format msgid "This machine type can only hold %d historical results per nozzle." msgstr "Šio tipo įrenginyje vienam purkštukui galima išsaugoti tik %d istorinių rezultatų." msgid "Edit Flow Dynamics Calibration" msgstr "Redaguoti srauto dinamikos kalibravimą" #, c-format, boost-format msgid "Within the same extruder, the name '%s' must be unique when the filament type, nozzle diameter, and nozzle flow are identical. Please choose a different name." msgstr "Tame pačiame ekstruderyje pavadinimas „%s“ turi būti unikalus, kai gijos tipas, purkštuko skersmuo ir purkštuko srautas yra identiški. Pasirinkite kitą pavadinimą." msgid "New Flow Dynamic Calibration" msgstr "Naujas srauto dinaminis kalibravimas" msgid "The filament must be selected." msgstr "Turi būti pasirinkta gija." msgid "The extruder must be selected." msgstr "Turi būti pasirinktas ekstruderis." msgid "The nozzle must be selected." msgstr "Turi būti pasirinktas purkštukas." msgid "Network lookup" msgstr "Tinklo paieška" msgid "Address" msgstr "Adresas" msgid "Hostname" msgstr "Mazgo pavadinimas (hostname)" msgid "Service name" msgstr "Paslaugos pavadinimas" msgid "OctoPrint version" msgstr "OctoPrint versija" msgid "Searching for devices" msgstr "Ieškoma įrenginių" msgid "Finished" msgstr "Baigta" msgid "Multiple resolved IP addresses" msgstr "Keletas atrastų IP adresų" #, boost-format msgid "" "There are several IP addresses resolving to hostname %1%.\n" "Please select one that should be used." msgstr "" "Yra keli IP adresai, susieti su mazgo pavadinimu %1%.\n" "Pasirinkite tą, kurį norite naudoti." # AI Translated msgid "Auto-scale for nozzle" msgstr "Automatinis mastelis pagal purkštuką" # AI Translated msgid "" "This model is designed around a 0.4 mm nozzle with a 0.2 mm layer height. \n" "When the scaling option is enabled (recommended), it dynamically resizes to match your current nozzle diameter and an appropriate layer height, making the test both accurate and easy to read.\n" "Turn scaling off only if you wish to print the reference model exactly as-is." msgstr "" "Šis modelis suprojektuotas 0,4 mm purkštukui ir 0,2 mm sluoksnio aukščiui. \n" "Kai mastelio keitimo parinktis įjungta (rekomenduojama), modelio dydis dinamiškai pritaikomas prie jūsų dabartinio purkštuko skersmens ir tinkamo sluoksnio aukščio, todėl testas yra ir tikslus, ir lengvai įskaitomas.\n" "Mastelio keitimą išjunkite tik tuo atveju, jei norite spausdinti etaloninį modelį tiksliai tokį, koks jis yra." msgid "PA Calibration" msgstr "PA kalibravimas (Pressure Advance)" msgid "Extruder type" msgstr "Ekstruderio tipas" msgid "DDE" msgstr "DDE" msgid "PA Tower" msgstr "PA bokštelis" msgid "PA Line" msgstr "PA linija (Pressure Advance)" msgid "PA Pattern" msgstr "PA raštas (Pressure Advance)" msgid "Start PA: " msgstr "Pradėti PA: " msgid "End PA: " msgstr "Baigti PA: " msgid "PA step: " msgstr "PA žingsnis: " msgid "Accelerations: " msgstr "Pagreičiai: " msgid "Speeds: " msgstr "Greičiai: " msgid "Print numbers" msgstr "Spausdinti numerius" msgid "Comma-separated list of printing accelerations" msgstr "Kableliais atskirtas spausdinimo pagreičių sąrašas" msgid "Comma-separated list of printing speeds" msgstr "Kableliais atskirtas spausdinimo greičių sąrašas" msgid "" "Please input valid values:\n" "Start PA: >= 0.0\n" "End PA: > Start PA\n" "PA step: >= 0.001" msgstr "" "Įveskite tinkamas reikšmes:\n" "Pradžios PA: >= 0.0\n" "Pabaigos PA: > Pradžios PA\n" "PA žingsnis: >= 0.001" msgid "" "Acceleration values must be greater than speed values.\n" "Please verify the inputs." msgstr "" "Pagreičio reikšmės turi būti didesnės už greičio reikšmes.\n" "Patikrinkite įvesties duomenis." msgid "Temperature calibration" msgstr "Temperatūros kalibravimas" msgid "Filament type" msgstr "Gijos tipas" msgid "PLA" msgstr "PLA" msgid "ABS/ASA" msgstr "ABS/ASA" msgid "PETG" msgstr "PETG" msgid "PCTG" msgstr "PCTG" msgid "TPU" msgstr "TPU" msgid "PA-CF" msgstr "PA-CF" msgid "PET-CF" msgstr "PET-CF" msgid "Start temp: " msgstr "Pradžios temp: " msgid "End temp: " msgstr "Galutinė temp: " msgid "Temp step: " msgstr "Temp žingsnis: " msgid "" "Please input valid values:\n" "Start temp: <= 500\n" "End temp: >= 155\n" "Start temp >= End temp + 5" msgstr "" "Įveskite tinkamas reikšmes:\n" "Pradžios temp.: <= 500\n" "Pabaigos temp.: >= 155\n" "Pradžios temp. >= Pabaigos temp. + 5" msgid "Max volumetric speed test" msgstr "Maksimalaus tūrinio greičio bandymas" msgid "Start volumetric speed: " msgstr "Pradinis tūrinis greitis: " msgid "End volumetric speed: " msgstr "Galinis tūrinis greitis: " msgid "" "Please input valid values:\n" "start > 0\n" "step >= 0\n" "end > start + step" msgstr "" "Įveskite tinkamas reikšmes:\n" "pradinis > 0\n" "žingsnis >= 0\n" "galinis > pradinis + žingsnis" msgid "VFA test" msgstr "VFA testas" msgid "Start speed: " msgstr "Pradinis greitis: " msgid "End speed: " msgstr "Galinis greitis: " # AI Translated msgid "Auto-adjust to max volumetric speed" msgstr "Automatiškai pritaikyti prie maksimalaus tūrinio greičio" # AI Translated msgid "If the end speed would exceed the filament's maximum volumetric speed, automatically lower the layer height (keeping standard values and staying within the machine's limits) to reach it. If even the minimum layer height is not enough, lower the end speed instead." msgstr "Jei galutinis greitis viršytų maksimalų gijos tūrinį greitį, automatiškai sumažinti sluoksnio aukštį (išlaikant standartines reikšmes ir neperžengiant įrenginio apribojimų), kad jį pasiektų. Jei net mažiausio sluoksnio aukščio nepakanka, vietoj to sumažinamas galutinis greitis." msgid "" "Please input valid values:\n" "start > 10\n" "step >= 0\n" "end > start + step" msgstr "" "Įveskite tinkamas reikšmes:\n" "pradinis > 10\n" "žingsnis >= 0\n" "galinis > pradinis + žingsnis" # AI Translated #, c-format, boost-format msgid "" "The end speed (%.0f mm/s) exceeds the filament's maximum volumetric speed (%.1f mm³/s), which limits the outer wall to about %.0f mm/s at this line width and layer height.\n" " Speeds above this will be clamped, so the upper blocks of the tower will not print at the requested speed.\n" "\n" "%s" msgstr "" "Galutinis greitis (%.0f mm/s) viršija maksimalų gijos tūrinį greitį (%.1f mm³/s), kuris esant tokiam linijos pločiui ir sluoksnio aukščiui riboja išorinę sienelę iki maždaug %.0f mm/s.\n" " Didesni greičiai bus apriboti, todėl viršutiniai bokšto blokai nebus spausdinami pageidaujamu greičiu.\n" "\n" "%s" # AI Translated #, c-format, boost-format msgid "" "The end speed (%.0f mm/s) exceeds the filament's maximum volumetric speed (%.1f mm³/s) at the default layer height (%.2f mm).\n" "\n" "The layer height has been reduced to %.2f mm (a value used by this printer's profiles) so the tower can reach the requested speed." msgstr "" "Galutinis greitis (%.0f mm/s) viršija maksimalų gijos tūrinį greitį (%.1f mm³/s) esant numatytajam sluoksnio aukščiui (%.2f mm).\n" "\n" "Sluoksnio aukštis sumažintas iki %.2f mm (reikšmė, naudojama šio spausdintuvo profiliuose), kad bokštas galėtų pasiekti pageidaujamą greitį." # AI Translated #, c-format, boost-format msgid "" "Even at the smallest layer height used by this printer's profiles (%.2f mm) the end speed (%.0f mm/s) exceeds the filament's maximum volumetric speed (%.1f mm³/s).\n" "\n" "The layer height will be set to %.2f mm and the end speed lowered to %.0f mm/s.\n" "\n" "Continue?" msgstr "" "Net ir esant mažiausiam sluoksnio aukščiui, naudojamam šio spausdintuvo profiliuose (%.2f mm), galutinis greitis (%.0f mm/s) viršija maksimalų gijos tūrinį greitį (%.1f mm³/s).\n" "\n" "Sluoksnio aukštis bus nustatytas į %.2f mm, o galutinis greitis sumažintas iki %.0f mm/s.\n" "\n" "Tęsti?" # AI Translated msgid "Continue anyway?" msgstr "Vis tiek tęsti?" # AI Translated msgid "Enable \"Auto-adjust\" to fix this automatically, or continue anyway?" msgstr "Įjungti „Automatiškai pritaikyti“, kad tai būtų ištaisyta automatiškai, ar vis tiek tęsti?" # AI Translated msgid "Enable \"Auto-scale for nozzle\" and \"Auto-adjust\" to fix this automatically, or continue anyway?" msgstr "Įjungti „Automatinis mastelis pagal purkštuką“ ir „Automatiškai pritaikyti“, kad tai būtų ištaisyta automatiškai, ar vis tiek tęsti?" msgid "Start retraction length: " msgstr "Pradinis įtraukimo ilgis: " msgid "End retraction length: " msgstr "Galinis įtraukimo ilgis: " msgid "Input shaping Frequency test" msgstr "Įvesties formavimo (input shaping) dažnio testas" msgid "Test model" msgstr "Bandomasis modelis" msgid "Ringing Tower" msgstr "Bangavimo bokštelis" msgid "Fast Tower" msgstr "Greitasis bokštelis" msgid "Please ensure the selected type is compatible with your firmware version." msgstr "Įsitikinkite, kad pasirinktas tipas yra suderinamas su jūsų programinės aparatinės įrangos versija." msgid "" "Marlin version => 2.1.2\n" "Fixed-Time motion not yet implemented." msgstr "" "Marlin versija => 2.1.2 (Marlin)\n" "Fiksuoto laiko judėjimas (Fixed-Time motion) dar neįdiegtas." msgid "Klipper version => 0.9.0" msgstr "Klipper versija => 0.9.0 (Klipper)" msgid "" "RepRap firmware version => 3.4.0\n" "Check your firmware documentation for supported shaper types." msgstr "" "RepRap programinės aparatinės įrangos versija => 3.4.0\n" "Palaikomus formavimo (shaper) tipus rasite savo programinės aparatinės įrangos dokumentacijoje." msgid "Frequency (Start / End): " msgstr "Dažnis (Pradžia / Pabaiga): " msgid "Start / End" msgstr "Pradžia / Pabaiga" msgid "Frequency settings" msgstr "Dažnio nustatymai" msgid "RepRap firmware uses the same frequency range for both axes." msgstr "RepRap programinė aparatinė įranga naudoja tą patį dažnių diapazoną abiem ašims." msgid "Damp: " msgstr "Slopinimas: " msgid "" "Recommended: Set Damp to 0.\n" "This will use the printer's default or saved value." msgstr "" "Rekomenduojama: nustatykite slopinimą (Damp) į 0.\n" "Bus naudojama numatytoji arba išsaugota spausdintuvo reikšmė." msgid "" "Please input valid values:\n" "(0 < FreqStart < FreqEnd < 500)" msgstr "" "Įveskite tinkamas reikšmes:\n" "(0 < FreqStart < FreqEnd < 500)" msgid "Please input a valid damping factor (0 < Damping/zeta factor <= 1)" msgstr "Įveskite tinkamą slopinimo koeficientą (0 < slopinimas/zeta koeficientas <= 1)" msgid "Input shaping Damp test" msgstr "Įvesties formavimo (input shaping) slopinimo testas" msgid "Check firmware compatibility." msgstr "Patikrinkite programinės aparatinės įrangos suderinamumą." msgid "Frequency: " msgstr "Dažnis: " msgid "Damp" msgstr "Slopinimas" msgid "RepRap firmware uses the same frequency for both axes." msgstr "RepRap programinė aparatinė įranga naudoja tą patį dažnį abiem ašims." msgid "Note: Use previously calculated frequencies." msgstr "Pastaba: Naudokite anksčiau apskaičiuotus dažnius." msgid "" "Please input valid values:\n" "(0 < Freq < 500)" msgstr "" "Įveskite tinkamas reikšmes:\n" "(0 < Freq < 500)" msgid "Please input a valid damping factor (0 <= DampingStart < DampingEnd <= 1)" msgstr "Įveskite galiojantį slopinimo koeficientą (0 <= Slopinimo pradžia < Slopinimo pabaiga <= 1)" msgid "Cornering test" msgstr "Posūkių įveikimo testas" msgid "SCV-V2" msgstr "SCV-V2" msgid "Start: " msgstr "Start: " msgid "End: " msgstr "End: " msgid "Cornering settings" msgstr "Posūkių įveikimo nustatymai" msgid "Note: Lower values = sharper corners but slower speeds." msgstr "Pastaba: mažesnės reikšmės = statesni kampai, bet mažesnis greitis." msgid "" "Marlin 2 Junction Deviation detected:\n" "To test Classic Jerk, set 'Maximum Junction Deviation' in Motion ability to 0." msgstr "" "Aptiktas Marlin 2 posūkio nuokrypis (Junction Deviation):\n" "Norėdami išbandyti klasikinį trūktelėjimą (Classic Jerk), judėjimo gebos (Motion ability) nustatymuose „Maximum Junction Deviation“ nustatykite į 0." msgid "" "Marlin 2 Classic Jerk detected:\n" "To test Junction Deviation, set 'Maximum Junction Deviation' in Motion ability to a value > 0." msgstr "" "Aptiktas Marlin 2 klasikinis trūktelėjimas (Classic Jerk):\n" "Norėdami išbandyti posūkio nuokrypį (Junction Deviation), judėjimo gebos (Motion ability) nustatymuose „Maximum Junction Deviation“ nustatykite reikšmę > 0." msgid "" "RepRap detected: Jerk in mm/s.\n" "OrcaSlicer will convert the values to mm/min when necessary." msgstr "" "Aptikta RepRap: trūktelėjimas (Jerk) nurodytas mm/s.\n" "Prireikus „OrcaSlicer“ konvertuos reikšmes į mm/min." #, c-format, boost-format msgid "" "Please input valid values:\n" "(0 <= Cornering <= %s)" msgstr "" "Įveskite tinkamas reikšmes:\n" "(0 <= posūkių įveikimas <= %s)" #, c-format, boost-format msgid "NOTE: High values may cause Layer shift (>%s)" msgstr "PASTABA: didelės reikšmės gali lemti sluoksnių poslinkį (Layer shift) (>%s)" msgid "Flow Ratio Calibration" msgstr "Srauto santykio kalibravimas" msgid "Calibration Test Type" msgstr "Kalibravimo testo tipas" msgid "Pass 1 (Coarse)" msgstr "1 etapas (apytikslis)" msgid "Pass 2 (Fine)" msgstr "2 etapas (tikslusis)" msgid "YOLO (Recommended)" msgstr "YOLO (rekomenduojama)" msgid "YOLO (Perfectionist)" msgstr "YOLO (perfekcionistas)" msgid "Top Surface Pattern" msgstr "Viršutinio paviršiaus raštas" msgid "Choose a slot for the selected color" msgstr "Pasirinkite lizdą pasirinktai spalvai" msgid "Material in the material station" msgstr "Medžiaga medžiagų stotelėje" msgid "Only materials of the same type can be selected." msgstr "Galima pasirinkti tik to paties tipo medžiagas." msgid "Send G-code to printer host" msgstr "Siųsti G-kodą tinkliniam spausdintuvui" msgid "Upload to Printer Host with the following filename:" msgstr "Įkelti į tinklinį spausdintuvą tokiu failo pavadinimu:" msgid "Use forward slashes ( / ) as a directory separator if needed." msgstr "Jei reikia, naudoti pasviruosius brūkšnius ( / ) kaip katalogų skyriklį." msgid "Upload to storage" msgstr "Įkelti į saugyklą" msgid "Switch to Device tab after upload." msgstr "Po įkėlimo pereikite į skirtuką Įrenginys." #, c-format, boost-format msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?" msgstr "Įkėlimo failo pavadinimas nesibaigia „%s“. Ar norite tęsti?" msgid "Upload" msgstr "Įkelti" msgid "Leveling before print" msgstr "Lygiavimas prieš spausdinimą" msgid "Time-lapse" msgstr "Laiko intervalai" msgid "Enable IFS" msgstr "Įjungti IFS" #, c-format, boost-format msgid "Detected %d IFS slots on printer." msgstr "Spausdintuve aptikta %d IFS lizdų." msgid "This printer does not report a material station." msgstr "Šis spausdintuvas nepraneša apie medžiagų stotelę." msgid "Unable to read IFS slots from printer." msgstr "Nepavyko nuskaityti IFS lizdų iš spausdintuvo." msgid "Loading IFS slots from printer..." msgstr "Įkeliami IFS lizdai iš spausdintuvo..." msgid "Slice the plate first to get project material information." msgstr "Pirmiausia supjaustykite (slice) plokštę, kad gautumėte projekto medžiagų informaciją." msgid "This plate uses multiple materials. Enable IFS and assign each tool to a printer slot." msgstr "Ši plokštė naudoja kelias medžiagas. Įjunkite IFS ir priskirkite kiekvieną įrankį spausdintuvo lizdui." msgid "Each project material must be assigned to an IFS slot before printing." msgstr "Prieš spausdinant, kiekviena projekto medžiaga turi būti priskirta IFS lizdui." msgid "Each project material must be assigned to a loaded IFS slot before printing." msgstr "Prieš spausdinant, kiekviena projekto medžiaga turi būti priskirta užpildytam IFS lizdui." msgid "Each project material must match the material loaded in the selected IFS slot." msgstr "Kiekviena projekto medžiaga turi sutapti su medžiaga, įkelta į pasirinktą IFS lizdą." msgid "Print host upload queue" msgstr "Įkėlimo spausdinimui tinkle eilė" msgid "ID" msgstr "ID" msgid "Progress" msgstr "Eiga" msgid "Host" msgstr "Mazgas (host)" msgctxt "OfFile" msgid "Size" msgstr "Dydis" msgid "Filename" msgstr "Failo pavadinimas" msgid "Cancel selected" msgstr "Atšaukti pasirinktą" msgid "Show error message" msgstr "Rodyti klaidos pranešimą" msgid "Queued" msgstr "Eilėje" msgid "Uploading" msgstr "Įkeliama" msgid "Canceling" msgstr "Atšaukiama" msgid "Error uploading to print host" msgstr "Klaida siunčiant į spausdintuvą" msgid "The selected bed type does not match the file. Please confirm before starting the print." msgstr "Pasirinktas pagrindo tipas neatitinka failo. Prieš pradėdami spausdinti, patvirtinkite." msgid "Heated Bed Leveling" msgstr "Šildomo pagrindo lygiavimas" msgid "Textured Build Plate (Side A)" msgstr "Tekstūruota pagrindo plokštė (A pusė)" msgid "Smooth Build Plate (Side B)" msgstr "Lygi pagrindo plokštė (B pusė)" #, c-format, boost-format msgid "Printer: %s" msgstr "Spausdintuvas: %s" msgid "Calibrate before printing" msgstr "Kalibruoti prieš spausdinimą" msgid "Filament Mapping:" msgstr "Gijų priskyrimas:" msgid "Unable to perform boolean operation on selected parts" msgstr "Nepavyksta atlikti loginės operacijos su pasirinktomis dalimis" msgid "Mesh Boolean" msgstr "Tinklelio loginės (Boolean) operacijos" msgid "Union" msgstr "Sąjunga (Union)" msgid "Difference" msgstr "Skirtumas (Difference)" msgid "Intersection" msgstr "Susikirtimas (Intersection)" msgid "Source Volume" msgstr "Išteklių tūris" msgid "Tool Volume" msgstr "Įrankių tūris" msgid "Subtract from" msgstr "Atimti iš" msgid "Subtract with" msgstr "Atimti su" msgid "selected" msgstr "pasirinkta" msgid "Part 1" msgstr "1 dalis" msgid "Part 2" msgstr "2 dalis" msgid "Delete input" msgstr "Ištrinti įvestį" msgid "Network Test" msgstr "Tinklo testas" msgid "Start Test Multi-Thread" msgstr "Pradėti bandymą su keliais srautais" msgid "Start Test Single-Thread" msgstr "Pradėti bandymą vienu srautu" msgid "Export Log" msgstr "Eksportuoti žurnalą" msgid "OrcaSlicer Version:" msgstr "\"OrcaSlicer\" versija:" msgid "System Version:" msgstr "Sistemos versija:" msgid "DNS Server:" msgstr "DNS serveris:" msgid "Test OrcaSlicer (GitHub)" msgstr "Išbandyti OrcaSlicer(GitHub)" msgid "Test OrcaSlicer (GitHub):" msgstr "Išbandyti OrcaSlicer(GitHub):" msgid "Test bing.com" msgstr "Išbandyti Bing.com" msgid "Test bing.com:" msgstr "Išbandyti Bing.com:" msgid "Log Info" msgstr "Žurnalo informacija" msgid "Select filament preset" msgstr "Pasirinkite gijos profilį" msgid "Create Filament" msgstr "Sukurti giją" msgid "Create Based on Current Filament" msgstr "Sukurti remiantis dabartine gija" msgid "Copy Current Filament Preset " msgstr "Nukopijuoti dabartinės gijos profilį " msgid "Basic Information" msgstr "Pagrindinė informacija" msgid "Add Filament Preset under this filament" msgstr "Pridėti gijos profilį šiai gijai" msgid "We could create the filament presets for your following printer:" msgstr "Galime sukurti gijų profilius šiam jūsų spausdintuvui:" msgid "Select Vendor" msgstr "Pasirinkite prekės ženklą" msgid "Input Custom Vendor" msgstr "Įvesti pasirinktinį prekės ženklą" msgid "Can't find vendor I want" msgstr "Nerandu norimo prekės ženklo" msgid "Select Type" msgstr "Pasirinkite tipą" msgid "Select Filament Preset" msgstr "Pasirinkite gijos profilį" msgid "Serial" msgstr "Serijinis" msgid "e.g. Basic, Matte, Silk, Marble" msgstr "pvz., pagrindinis, matinis, šilkinis, marmurinis" msgid "Filament Preset" msgstr "Gijos profilis" msgid "Create" msgstr "Sukurti" msgid "Vendor is not selected; please reselect vendor." msgstr "Prekės ženklas nepasirinktas; prašome pasirinkti prekės ženklą iš naujo." msgid "Custom vendor missing; please input custom vendor." msgstr "Trūksta pasirinkto prekės ženklo; prašome įvesti prekės ženklą." msgid "\"Bambu\" or \"Generic\" cannot be used as a Vendor for custom filaments." msgstr "„Bambu“ arba „Generic“ negalima naudoti kaip pasirinktinių gijų prekės ženklo." msgid "Filament type is not selected, please reselect type." msgstr "Nepasirinktas gijos tipas, pasirinkite tipą iš naujo." msgid "Filament serial missing; please input serial." msgstr "Trūksta gijos serijos; prašome įvesti seriją." msgid "There may be disallowed characters in the vendor or serial input of the filament. Please delete and re-enter." msgstr "Gijos prekės ženklo arba serijos įvestyje gali būti neleistinų simbolių. Prašome ištrinti ir įvesti iš naujo." msgid "All inputs in the custom vendor or serial are spaces. Please re-enter." msgstr "Visi pasirinktinio prekės ženklo ar serijos įvesties duomenys yra tarpai. Įveskite iš naujo." msgid "The vendor cannot be a number; please re-enter." msgstr "Prekės ženklas negali būti skaičius; prašome įvesti iš naujo." msgid "You have not selected a printer or preset yet. Please select at least one." msgstr "Dar nepasirinkote spausdintuvo arba profilio. Pasirinkite bent vieną." #, c-format, boost-format msgid "" "The Filament name %s you created already exists.\n" "If you continue, the preset created will be displayed with its full name. Do you want to continue?" msgstr "" "Jūsų sukurtas gijos pavadinimas %s jau egzistuoja.\n" "Jei tęsite, sukurtas profilis bus rodomas pilnu pavadinimu. Ar norite tęsti?" msgid "Some existing presets have failed to be created, as follows:\n" msgstr "Kai kurių esamų profilių nepavyko sukurti:\n" msgid "" "\n" "Do you want to rewrite it?" msgstr "" "\n" "Ar norite jį perrašyti?" msgid "" "We would rename the presets as \"Vendor Type Serial @printer you selected\".\n" "To add preset for more printers, please go to printer selection" msgstr "" "Profiliai bus pervadinti pagal šabloną „PrekėsŽenklas Tipas Serija @pasirinktas_spausdintuvas“.\n" "Norėdami pridėti profilį daugiau spausdintuvų, eikite į spausdintuvų pasirinkimą." msgid "Create Printer/Nozzle" msgstr "Sukurti spausdintuvą / purkštuką" msgid "Create Printer" msgstr "Sukurti spausdintuvą" msgid "Create Nozzle for Existing Printer" msgstr "Sukurti esamo spausdintuvo purkštuką" msgid "Create from Template" msgstr "Sukurti pagal šabloną" msgid "Create Based on Current Printer" msgstr "Kurti pagal esamą spausdintuvą" msgid "Import Preset" msgstr "Importuoti profilį" msgid "Create Type" msgstr "Sukurti tipą" msgid "The model was not found; please reselect vendor." msgstr "Modelis nerastas; prašome pasirinkti prekės ženklą iš naujo." msgid "Select Printer" msgstr "Pasirinkite spausdintuvą" msgid "Select Model" msgstr "Pasirinkite modelį" msgid "Input Custom Model" msgstr "Įvesti pasirinktinį modelį" msgid "Can't find my printer model" msgstr "Negaliu rasti savo spausdintuvo modelio" msgid "Input Custom Nozzle Diameter" msgstr "Įvesti pasirinktinį purkštuko skersmenį" msgid "Can't find my nozzle diameter" msgstr "Nerandu savo purkštuko skersmens" msgid "Printable Space" msgstr "Spausdintina erdvė" msgid "Hot Bed STL" msgstr "Šildomo pagrindo STL" msgid "Hot Bed SVG" msgstr "Šildomo pagrindo SVG" msgid "Max Print Height" msgstr "Maksimalus spausdinimo aukštis" #, c-format, boost-format msgid "The file exceeds %d MB, please import again." msgstr "Failas viršija %d MB, importuokite dar kartą." msgid "Exception in obtaining file size, please import again." msgstr "Išimtis gaunant failo dydį, importuokite dar kartą." msgid "Preset path was not found; please reselect vendor." msgstr "Profilio kelias nerastas; prašome pasirinkti prekės ženklą iš naujo." msgid "The printer model was not found, please reselect." msgstr "Spausdintuvo modelis nerastas, pasirinkite iš naujo." msgid "The nozzle diameter was not found; please reselect." msgstr "Purkštuko skersmuo nerastas; prašome pasirinkti iš naujo." msgid "The printer preset was not found; please reselect." msgstr "Spausdintuvo profilis nerastas; prašome pasirinkti iš naujo." msgid "Printer Preset" msgstr "Spausdintuvo profilis" msgid "Filament Preset Template" msgstr "Gijos profilio šablonas" msgid "Process Preset Template" msgstr "Proceso profilio šablonas" msgid "You have not yet chosen which printer preset to create based on. Please choose the vendor and model of the printer" msgstr "Dar nepasirinkote, kuriuo spausdintuvo profiliu remiantis kurti. Pasirinkite spausdintuvo prekės ženklą ir modelį" msgid "You have entered a disallowed character in the printable area section on the first page. Please use only numbers." msgstr "Pirmajame puslapyje spausdinimo srities skiltyje įvedėte neleistiną simbolį. Prašome naudoti tik skaičius." msgid "" "The printer preset you created already has a preset with the same name. Do you want to overwrite it?\n" "\tYes: Overwrite the printer preset with the same name, and filament and process presets with the same preset name will be recreated \n" "and filament and process presets without the same preset name will be reserved.\n" "\tCancel: Do not create a preset; return to the creation interface." msgstr "" "Jūsų sukurtas spausdintuvo profilis jau turi profilį tokiu pačiu pavadinimu. Ar norite jį perrašyti?\n" "\n" "\tTaip: Perrašyti spausdintuvo profilį tokiu pačiu pavadinimu, o gijos ir proceso profiliai su tokiu pačiu pavadinimu bus sukurti iš naujo, o gijos ir proceso profiliai su kitokiais pavadinimais bus išsaugoti.\n" "\tAtšaukti: Nekurti profilio; grįžti į kūrimo sąsają." msgid "You need to select at least one filament preset." msgstr "Reikia pasirinkti bent vieną gijos profilį." msgid "You need to select at least one process preset." msgstr "Reikia pasirinkti bent vieną proceso profilį." msgid "Create filament presets failed. As follows:\n" msgstr "Nepavyko sukurti gijos profilių:\n" msgid "Create process presets failed. As follows:\n" msgstr "Nepavyko sukurti proceso profilių:\n" msgid "Vendor was not found; please reselect." msgstr "Prekės ženklas nerastas; prašome pasirinkti iš naujo." msgid "Current vendor has no models, please reselect." msgstr "Šis prekės ženklas neturi modelių, pasirinkite iš naujo." msgid "You have not selected the vendor and model or input the custom vendor and model." msgstr "Nepasirinkote prekės ženklo ir modelio arba neįvedėte pasirinktinio prekės ženklo ir modelio." msgid "There may be escape characters in the custom printer vendor or model. Please delete and re-enter." msgstr "Pasirinktiniame spausdintuvo prekės ženklo arba modelio pavadinime gali būti valdymo (escape) simbolių. Ištrinkite ir įveskite iš naujo." msgid "All inputs in the custom printer vendor or model are spaces. Please re-enter." msgstr "Visi pasirinktinio spausdintuvo prekės ženklo arba modelio įvesties duomenys yra tarpai. Įveskite iš naujo." msgid "Please check bed printable shape and origin input." msgstr "Patikrinkite pagrindo spausdinimo formą ir pradžią." msgid "You have not yet selected the printer to replace the nozzle for; please choose a printer." msgstr "Dar nepasirinkote spausdintuvo, kuriam norite pakeisti purkštuką; prašome pasirinkti spausdintuvą." msgid "The entered nozzle diameter is invalid, please re-enter:\n" msgstr "" "Įvestas netinkamas purkštuko skersmuo, įveskite iš naujo:\n" "\n" msgid "" "The system preset does not allow creation. \n" "Please re-enter the printer model or nozzle diameter." msgstr "" "Sisteminio profilio kurti neleidžiama.\n" "Iš naujo įveskite spausdintuvo modelį arba purkštuko skersmenį." msgid "" "\n" "\n" "Available nozzle profiles for this printer:" msgstr "" "\n" "\n" "Šiam spausdintuvui prieinami purkštukų profiliai:" msgid "" "\n" "\n" "Choose YES to switch existing preset:" msgstr "" "\n" "\n" "Pasirinkite TAIP, kad pakeistumėte esamą profilį:" msgid "Printer Created Successfully" msgstr "Sėkmingai sukurtas spausdintuvas" msgid "Filament Created Successfully" msgstr "Sėkmingai sukurta gija" msgid "Printer Created" msgstr "Sukurtas spausdintuvas" msgid "Please go to printer settings to edit your presets" msgstr "Eikite į spausdintuvo nustatymus, jei norite redaguoti savo profilius" msgid "Filament Created" msgstr "Sukurta gija" msgid "" "Please go to filament settings to edit your presets if you need to.\n" "Please note that nozzle temperature, hot bed temperature, and maximum volumetric speed each have a significant impact on printing quality. Please set them carefully." msgstr "" "Jei reikia, eikite į gijos nustatymus ir redaguokite savo profilius.\n" "\n" "Atkreipkite dėmesį, kad purkštuko temperatūra, darbinio stalo temperatūra ir maksimalus tūrinis greitis turi didelės įtakos spausdinimo kokybei. Prašome juos nustatyti atsargiai." msgid "" "\n" "\n" "Orca has detected that your user presets synchronization function is not enabled, which may result in unsuccessful Filament settings on the Device page.\n" "Click \"Sync user presets\" to enable the synchronization function." msgstr "" "\n" "\n" "„Orca“ pastebėjo, kad jūsų naudotojo profilių sinchronizavimo funkcija neįjungta, todėl įrenginio puslapyje gijos nustatymai gali veikti netinkamai.\n" "Spustelėkite „Sinchronizuoti naudotojo profilius“, kad įjungtumėte sinchronizavimo funkciją." msgid "Printer Setting" msgstr "Spausdintuvo profilis" msgid "Printer config bundle(.orca_printer)" msgstr "Spausdintuvo konfigūracijos paketas(.orca_printer)" msgid "Filament bundle(.orca_filament)" msgstr "Gijų paketas(.orca_filament)" msgid "Printer presets(.zip)" msgstr "Spausdintuvo profiliai (.zip)" msgid "Filament presets(.zip)" msgstr "Gijos profiliai (.zip)" msgid "Process presets(.zip)" msgstr "Proceso profiliai (.zip)" msgid "initialize fail" msgstr "inicializuoti nepavyksta" msgid "add file fail" msgstr "pridėti failą nepavyksta" msgid "add bundle structure file fail" msgstr "pridėti paketų struktūros failą nepavyksta" msgid "finalize fail" msgstr "baigti nepavyksta" msgid "open zip written fail" msgstr "atidaryti zip raštu nepavyksta" msgid "Export successful" msgstr "Sėkmingai eksportuota" #, c-format, boost-format msgid "" "The '%s' folder already exists in the current directory. Do you want to clear it and rebuild it?\n" "If not, a time suffix will be added, and you can modify the name after creation." msgstr "" "Aplankas „%s“ esamame kataloge jau egzistuoja. Ar norite jį išvalyti ir sukurti iš naujo?\n" "Jei ne, bus pridėtas laiko priesaga, o pavadinimą po sukūrimo galėsite pakeisti." #, c-format, boost-format msgid "" "The file: %s\n" "may have been opened by another program.\n" "Please close it and try again." msgstr "" "Failas: %s\n" "gali būti atidarytas kitoje programoje.\n" "Uždarykite jį ir bandykite dar kartą." msgid "" "Printer and all the filament and process presets that belongs to the printer.\n" "Can be shared with others." msgstr "" "Spausdintuvas ir visi jam priklausantys gijos bei proceso profiliai.\n" "Galima bendrinti su kitais." msgid "" "User's filament preset set.\n" "Can be shared with others." msgstr "" "Naudotojo gijos profilių rinkinys.\n" "Galima bendrinti su kitais." msgid "Only display printers with changes to printer, filament, and process presets are displayed." msgstr "Rodomi tik tie spausdintuvai, kurių spausdintuvo, kaitinamojo siūlo ir proceso išankstinių nustatymų (angl. *presets*) pakeitimai buvo atlikti." msgid "Only display the filament names with changes to filament presets." msgstr "Rodyti tik tuos gijų pavadinimus, kurių gijos profiliai buvo pakeisti." msgid "Only printer names with user printer presets will be displayed, and each preset you choose will be exported as a zip." msgstr "Bus rodomi tik tie spausdintuvų pavadinimai, kurie turi naudotojo sukurtų profilių, o kiekvienas pasirinktas profilis bus eksportuotas kaip ZIP failas." msgid "" "Only the filament names with user filament presets will be displayed, \n" "and all user filament presets in each filament name you select will be exported as a zip." msgstr "" "Bus rodomi tik tie gijų pavadinimai, kurie turi naudotojo sukurtų profilių, \n" "o visi pasirinkto pavadinimo naudotojo gijos profiliai bus eksportuoti kaip ZIP failas." msgid "" "Only printer names with changed process presets will be displayed, \n" "and all user process presets in each printer name you select will be exported as a zip." msgstr "" "Bus rodomi tik tie spausdintuvų pavadinimai, kurie turi pakeistų proceso profilių, \n" "o visi pasirinkto spausdintuvo naudotojo proceso profiliai bus eksportuoti kaip ZIP failas." msgid "Please select at least one printer or filament." msgstr "Pasirinkite bent vieną spausdintuvą arba giją." msgid "Please select a preset type you want to export" msgstr "Prašome pasirinkti profilio tipą, kurį norite eksportuoti." msgid "Failed to create temporary folder, please try Export Configs again." msgstr "Nepavyko sukurti laikinojo aplanko, bandykite dar kartą eksportuoti konfigūracijas." msgid "Edit Filament" msgstr "Redaguoti giją" msgid "Filament presets under this filament" msgstr "Šiai gijai priklausantys profiliai" msgid "Note: If the only preset under this filament is deleted, the filament will be deleted after exiting the dialog." msgstr "Pastaba: jei bus ištrintas vienintelis šiai gijai priklausantis profilis, pati gija bus ištrinta uždarius šį langą." msgid "Presets inherited by other presets cannot be deleted" msgstr "Profilių, kuriuos paveldi kiti profiliai, ištrinti negalima" msgid "The following presets inherits this preset." msgid_plural "The following preset inherits this preset." msgstr[0] "Šį profilį paveldi šis profilis." msgstr[1] "Šį profilį paveldi šie profiliai." msgstr[2] "Šį profilį paveldi šie profiliai." msgid "Delete Preset" msgstr "Ištrinti profilį" msgid "Are you sure to delete the selected preset?" msgstr "Ar tikrai norite ištrinti pasirinktą profilį?" msgid "Delete preset" msgstr "Ištrinti profilį" msgid "+ Add Preset" msgstr "+ Pridėti profilį" msgid "" "All the filament presets belong to this filament would be deleted.\n" "If you are using this filament on your printer, please reset the filament information for that slot." msgstr "" "Visi šiai gijai priklausantys profiliai bus ištrinti.\n" "Jei naudojate šią giją spausdintuve, iš naujo nustatykite to lizdo gijos informaciją." msgid "Delete filament" msgstr "Ištrinti giją" msgid "Add Preset" msgstr "Pridėti profilį" msgid "Add preset for new printer" msgstr "Pridėti profilį naujam spausdintuvui" msgid "Copy preset from filament" msgstr "Kopijuoti profilį iš gijos" msgid "The filament choice not find filament preset, please reselect it" msgstr "Pasirinktai gijai nerastas joks gijos profilis, pasirinkite iš naujo" msgid "[Delete Required]" msgstr "[Reikia ištrinti]" msgid "Edit Preset" msgstr "Redaguoti profilį" msgid "For more information, please check out our Wiki" msgstr "Norėdami gauti daugiau informacijos, apsilankykite mūsų „Wiki“." msgid "Wiki" msgstr "Wiki" msgid "Collapse" msgstr "Sutraukti" msgid "Daily Tips" msgstr "Dienos patarimai" msgid "" "The printer nozzle information has not been set.\n" "Please configure it before proceeding with the calibration." msgstr "" "Spausdintuvo purkštuko informacija nenustatyta.\n" "Konfigūruokite ją prieš tęsdami kalibravimą." msgid "" "The nozzle type does not match the actual printer nozzle type.\n" "Please click the Sync button above and restart the calibration." msgstr "" "Purkštuko tipas neatitinka faktinio spausdintuvo purkštuko tipo.\n" "Spustelėkite viršuje esantį sinchronizavimo mygtuką ir paleiskite kalibravimą iš naujo." #, c-format, boost-format msgid "Printing %1s material with %2s nozzle may cause nozzle damage." msgstr "Spausdinant %1s medžiagą su %2s purkštuku, galima sugadinti purkštuką." msgid "Need select printer" msgstr "Reikia pasirinkti spausdintuvą" msgid "The start, end or step is not valid value." msgstr "Pradžios, pabaigos arba žingsnio reikšmė netinkama." msgid "The number of printer extruders and the printer selected for calibration does not match." msgstr "Spausdintuvo ekstruderių skaičius neatitinka kalibravimui pasirinkto spausdintuvo parametrų." #, c-format, boost-format msgid "The nozzle diameter of %s extruder is 0.2mm which does not support automatic Flow Dynamics calibration." msgstr "%s ekstruderio purkštuko skersmuo yra 0,2 mm, o toks skersmuo nepalaiko automatinio srauto dinamikos kalibravimo." #, c-format, boost-format msgid "" "The currently selected nozzle diameter of %s extruder does not match the actual nozzle diameter.\n" "Please click the Sync button above and restart the calibration." msgstr "" "Šiuo metu pasirinktas %s ekstruderio purkštuko skersmuo neatitinka faktinio purkštuko skersmens.\n" "Spustelėkite viršuje esantį sinchronizavimo mygtuką ir paleiskite kalibravimą iš naujo." msgid "" "The nozzle diameter does not match the actual printer nozzle diameter.\n" "Please click the Sync button above and restart the calibration." msgstr "" "Purkštuko skersmuo neatitinka faktinio spausdintuvo purkštuko skersmens.\n" "Spustelėkite viršuje esantį sinchronizavimo mygtuką ir paleiskite kalibravimą iš naujo." #, c-format, boost-format msgid "" "The currently selected nozzle type of %s extruder does not match the actual printer nozzle type.\n" "Please click the Sync button above and restart the calibration." msgstr "" "Šiuo metu pasirinktas %s ekstruderio purkštuko tipas neatitinka faktinio spausdintuvo purkštuko tipo.\n" "Spustelėkite viršuje esantį sinchronizavimo mygtuką ir paleiskite kalibravimą iš naujo." msgid "Unable to calibrate: maybe because the set calibration value range is too large, or the step is too small" msgstr "Nepavyksta sukalibruoti: galbūt dėl to, kad nustatytas kalibravimo vertės intervalas yra per didelis arba žingsnis yra per mažas" msgid "Physical Printer" msgstr "Fizinis spausdintuvas" msgid "Print Host upload" msgstr "Įkėlimas spausdinimui tinkle" msgid "Select the network agent implementation for printer communication. Available agents are registered at startup." msgstr "Pasirinkite tinklo agento modulį ryšiui su spausdintuvu palaikyti. Prieinami agentai užregistruojami paleidimo metu." msgid "Select a Flashforge printer" msgstr "Pasirinkite „Flashforge“ spausdintuvą" msgid "Discovered Printers" msgstr "Aptikti spausdintuvai" msgid "Could not get a valid Printer Host reference" msgstr "Nepavyko gauti galiojančios tinklinio spausdintuvo nuorodos" msgid "Valid session not detected. Proceed with login to 3DPrinterOS?" msgstr "Nerasta galiojančios sesijos. Prisijungti prie „3DPrinterOS“?" msgid "Success!" msgstr "Pavyko!" msgid "Are you sure to log out?" msgstr "Ar tikrai norite atsijungti?" msgid "View print host webui in Device tab" msgstr "Rodyti tinklo mazgo (host) puslapį skirtuke „Įrenginys“" msgid "Replace the BambuLab's device tab with print host webui" msgstr "Pakeisti „BambuLab“ įrenginio skirtuką tinklo mazgo (host) puslapiu" msgid "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-signed certificate." msgstr "HTTPS CA failas yra neprivalomas. Jis reikalingas tik tuo atveju, jei naudojate HTTPS su savarankiškai pasirašytu sertifikatu." msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*" msgstr "Sertifikato failai (*.crt, *.pem)|*.crt;*.pem|Visi failai|*.*" msgid "Open CA certificate file" msgstr "Atidaryti CA sertifikato failą" #, c-format, boost-format msgid "On this system, %s uses HTTPS certificates from the system Certificate Store or Keychain." msgstr "Šioje sistemoje %s naudoja HTTPS sertifikatus iš sisteminės sertifikatų saugyklos (Certificate Store) arba raktinės (Keychain)." msgid "To use a custom CA file, please import your CA file into Certificate Store / Keychain." msgstr "Norėdami naudoti pasirinktinį CA failą, importuokite jį į sertifikatų saugyklą arba raktinę (Keychain)." msgid "Login/Test" msgstr "Prisijungimas / bandymas" msgid "Connection to printers connected via the print host failed." msgstr "Nepavyko prisijungti prie spausdintuvų, prijungtų per tinklą." msgid "Detect Creality K-series printer" msgstr "Aptikti „Creality K“ serijos spausdintuvą" msgid "Click Scan to look for K-series printers on your network." msgstr "Spustelėkite „Nuskaityti“ (Scan), kad tinkle ieškotumėte „K“ serijos spausdintuvų." msgid "Use Selected" msgstr "Naudoti pasirinktą" msgid "Scanning the LAN for K-series printers... this takes a few seconds." msgstr "Lokaliojo tinklo (LAN) nuskaitymas, ieškant „K“ serijos spausdintuvų... tai užtruks kelias sekundes." msgid "No K-series printers found. Make sure the printer is on the same network and not blocked by Wi-Fi client isolation, then click Scan again." msgstr "„K“ serijos spausdintuvų nerasta. Įsitikinkite, kad spausdintuvas yra tame pačiame tinkle ir jo neblokuoja „Wi-Fi“ klientų izoliacija, tada dar kartą spustelėkite „Nuskaityti“ (Scan)." #, c-format msgid "Found %zu Creality printer(s). Select one and click Use Selected." msgstr "Rasta „%zu“ „Creality“ spausdintuvų. Pasirinkite vieną ir spustelėkite „Naudoti pasirinktą“ (Use Selected)." msgid "Active" msgstr "Aktyvus" msgid "Printers" msgstr "Spausdintuvai" msgid "Processes" msgstr "Procesai" msgid "Show/Hide system information" msgstr "Rodyti/slėpti sistemos informaciją" msgid "Copy system information to clipboard" msgstr "Kopijuoti sistemos informaciją į iškarpinę" msgid "We need information for diagnosing source of the issue. Check wiki page for detailed guide." msgstr "Mums reikia informacijos problemos šaltiniui diagnozuoti. Išsamų vadovą rasite „Wiki“ puslapyje." msgid "Pack button collects project file and logs of current session onto a zip file." msgstr "Mygtukas „Supakuoti“ (Pack) surenka projekto failą ir dabartinės sesijos žurnalus į ZIP failą." msgid "Any additional visual examples like images or screen recordings might be helpful while reporting the issue." msgstr "Papildomi vaizdiniai pavyzdžiai, tokie kaip nuotraukos ar ekrano įrašai, gali būti naudingi pranešant apie šią problemą." msgid "Report issue" msgstr "Pranešti apie problemą" msgid "Pack" msgstr "Supakuoti" msgid "Cleans and rebuilds system profiles cache on next launch." msgstr "Išvalo ir iš naujo sukuria sistemos profilių talpyklą kito paleidimo metu." msgid "Clean system profiles cache" msgstr "Išvalyti sistemos profilių talpyklą" msgid "Clean" msgstr "Išvalyti" msgid "Loaded profiles overview" msgstr "Įkeltų profilių apžvalga" msgid "This section shows information for loaded profiles." msgstr "Šiame skyriuje pateikiama informacija apie įkeltus profilius." msgid "Exports detailed overview of loaded profiles in json format." msgstr "Eksportuoja išsamią įkeltų profilių apžvalgą JSON formatu." msgid "Configurations folder" msgstr "Konfigūracijų aplankas" msgid "Opens configurations folder." msgstr "Atidaro konfigūracijų aplanką" msgid "Log level" msgstr "Žurnalo lygis" msgid "Stored logs" msgstr "Saugomi žurnalai" msgid "Packs all stored logs onto a zip file." msgstr "Supakuoja visus saugomus žurnalus į ZIP failą." msgid "Profiles" msgstr "Profiliai" msgid "Select NO to close dialog and review project." msgstr "Pasirinkite „NE“, norėdami uždaryti dialogo langą ir peržiūrėti projektą." msgid "No project file on current session. Only logs will be included to package" msgstr "Dabartinėje sesijoje nėra projekto failo. Į paketą bus įtraukti tik žurnalai." msgid "Please make sure any instances of OrcaSlicer are not running" msgstr "Įsitikinkite, kad jokių „OrcaSlicer“ egzempliorių nėra paleista." msgid "System folder cannot be deleted because some files are in use by another application. Please close any applications using these files and try again." msgstr "Sistemos aplanko negalima ištrinti, nes kai kuriuos failus naudoja kita programa. Prašome uždaryti visas programas, kurios naudoja šiuos failus, ir bandyti dar kartą." msgid "Failed to delete system folder..." msgstr "Nepavyko ištrinti sistemos aplanko..." msgid "Failed to determine executable path." msgstr "Nepavyko nustatyti vykdomojo failo kelio." msgid "Failed to launch a new instance." msgstr "Nepavyko paleisti naujo egzemplioriaus." msgid "log(s)" msgstr "Žurnalas(-i)" msgid "Choose where to save the exported JSON file" msgstr "Pasirinkite, kur saugoti eksportuotą JSON failą" msgid "" "Export failed\n" "Please check write permissions or file in use by another application" msgstr "" "Eksportuoti nepavyko.\n" "Patikrinkite rašymo teises arba failą, kurį naudoja kita programa." msgid "Choose where to save the exported ZIP file" msgstr "Pasirinkite, kur saugoti eksportuotą ZIP failą" msgid "File already exists. Overwrite?" msgstr "Failas jau egzistuoja, ar norite jį pakeisti?" msgid "3DPrinterOS Cloud upload options" msgstr "„3DPrinterOS“ debesijos įkėlimo parinktys" msgid "Single file" msgstr "Vienas failas" msgid "Project File" msgstr "Projekto failas" msgid "Project:" msgstr "Projektas:" msgid "Printer type:" msgstr "Spausdintuvo tipas:" msgid "Printer type not found, please select manually." msgstr "Spausdintuvo tipas nerastas, pasirinkite rankiniu būdu." msgid "Authorizing..." msgstr "Autorizuojama..." msgid "Error. Can't get api token for authorization" msgstr "Klaida. Nepavyko gauti API žetono (token) autorizacijai" msgid "Could not parse server response." msgstr "Nepavyko apdoroti serverio atsakymo." msgid "Error saving session to file" msgstr "Klaida įrašant sesiją į failą" msgid "Error session check" msgstr "Klaida tikrinant sesiją" msgid "Error during file upload" msgstr "Klaida įkeliant failą" #, c-format, boost-format msgid "Mismatched type of print host: %s" msgstr "Neatitinkantis tinklo mazgo (host) tipas: %s" msgid "Connection to AstroBox is working correctly." msgstr "Ryšys su „AstroBox“ veikia tinkamai." msgid "Could not connect to AstroBox" msgstr "Nepavyko prisijungti prie „AstroBox“" msgid "Note: AstroBox version 1.1.0 or higher is required." msgstr "Pastaba: reikalinga „AstroBox“ 1.1.0 arba naujesnė versija." msgid "Connection to Duet is working correctly." msgstr "Ryšys su Duet veikia tinkamai." msgid "Could not connect to Duet" msgstr "Nepavyko prisijungti prie Duet" msgid "Unknown error occurred" msgstr "Įvyko nežinoma klaida" msgid "Wrong password" msgstr "Neteisingas slaptažodis" msgid "Could not get resources to create a new connection" msgstr "Nepavyko gauti išteklių naujam ryšiui sukurti" msgid "Upload not enabled on FlashAir card." msgstr "Įkėlimas neįjungtas „FlashAir“ kortelėje." msgid "Connection to FlashAir is working correctly and upload is enabled." msgstr "Prisijungimas prie „FlashAir“ veikia tinkamai ir įkėlimas įjungtas." msgid "Could not connect to FlashAir" msgstr "Nepavyko prisijungti prie „FlashAir“" msgid "Note: FlashAir with firmware 2.00.02 or newer and activated upload function is required." msgstr "Pastaba: reikalinga „FlashAir“ su 2.00.02 ar naujesne programine įranga ir aktyvuota įkėlimo funkcija." msgid "Connection to MKS is working correctly." msgstr "Ryšys su MKS veikia tinkamai." msgid "Could not connect to MKS" msgstr "Nepavyko prisijungti prie MKS" msgid "Connection to Moonraker is working correctly." msgstr "Ryšys su „Moonraker“ veikia tinkamai." msgid "Could not connect to Moonraker" msgstr "Nepavyko prisijungti prie \"Moonraker\"" msgid "The host responded but it doesn't look like Moonraker (missing result.klippy_state)." msgstr "Pagrindinis kompiuteris atsakė, tačiau tai neatrodo kaip „Moonraker“ (trūksta „result.klippy_state“)." #, c-format, boost-format msgid "Could not parse Moonraker server response: %s" msgstr "Nepavyko apdoroti Moonraker serverio atsakymo: %s" msgid "Connection to OctoPrint is working correctly." msgstr "Prisijungimas prie OctoPrint veikia tinkamai." msgid "Could not connect to OctoPrint" msgstr "Nepavyko prisijungti prie „OctoPrint“" msgid "Note: OctoPrint version 1.1.0 or higher is required." msgstr "Pastaba: reikalinga „OctoPrint“ 1.1.0 arba naujesnė versija." msgid "Connection to Prusa SL1 / SL1S is working correctly." msgstr "Ryšys su Prusa SL1 / SL1S veikia tinkamai." msgid "Could not connect to Prusa SLA" msgstr "Nepavyko prisijungti prie Prusa SLA" msgid "Connection to PrusaLink is working correctly." msgstr "Ryšys su PrusaLink veikia tinkamai." msgid "Could not connect to PrusaLink" msgstr "Nepavyko prisijungti prie „PrusaLink“" msgid "Storages found" msgstr "Rastos saugyklos" #. TRN %1% = storage path #, boost-format msgid "%1% : read only" msgstr "%1% : tik skaitymui" #. TRN %1% = storage path #, boost-format msgid "%1% : no free space" msgstr "%1% : nėra laisvos vietos" #. TRN %1% = host #, boost-format msgid "Upload has failed. There is no suitable storage found at %1%." msgstr "Įkelti nepavyko. %1% tinkamos saugyklos nerasta." msgid "Connection to Prusa Connect is working correctly." msgstr "Ryšys su „Prusa Connect“ veikia tinkamai." msgid "Could not connect to Prusa Connect" msgstr "Nepavyko prisijungti prie „Prusa Connect“" msgid "Connection to Repetier is working correctly." msgstr "Ryšys su „Repetier“ veikia tinkamai." msgid "Could not connect to Repetier" msgstr "Nepavyko prisijungti prie „Repetier“" msgid "Note: Repetier version 0.90.0 or higher is required." msgstr "Pastaba: reikalinga „Repetier“ 0.90.0 arba naujesnė versija." #, boost-format msgid "" "HTTP status: %1%\n" "Message body: \"%2%\"" msgstr "" "HTTP būsena: %1%\n" "Pranešimo tekstas: \"%2%\"" #, boost-format msgid "" "Parsing of host response failed.\n" "Message body: \"%1%\"\n" "Error: \"%2%\"" msgstr "" "Nepavyko apdoroti tinklo įrenginio atsakymo.\n" "Pranešimo tekstas: „%1%“\n" "Klaida: „%2%“" #, boost-format msgid "" "Enumeration of host printers failed.\n" "Message body: \"%1%\"\n" "Error: \"%2%\"" msgstr "" "Nepavyko suskaičiuoti tinklinių spausdintuvų.\n" "Pranešimo tekstas: „%1%“\n" "Klaida: „%2%“" msgid "It has a small layer height. This results in almost negligible layer lines and high print quality. It is suitable for most printing cases." msgstr "Dėl mažo sluoksnio aukščio sluoksnio linijos yra beveik nereikšmingos, o spausdinimo kokybė - aukšta. Tinka daugeliui bendrųjų spausdinimo atvejų." msgid "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds and acceleration, and the sparse infill pattern is Gyroid. This results in much higher print quality but a much longer print time." msgstr "Palyginti su numatytuoju 0,2 mm purkštuko profiliu, jo greitis ir pagreitis yra mažesni, o retas užpildymo raštas (sparse infill) yra „Gyroid“. Tai užtikrina daug aukštesnę spausdinimo kokybę, tačiau spausdinimas trunka daug ilgiau." msgid "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height. This results in almost negligible layer lines and slightly shorter print time." msgstr "Palyginti su numatytuoju 0,2 mm purkštuko profiliu, jo sluoksnio aukštis yra šiek tiek didesnis, todėl sluoksnio linijos yra beveik nepastebimos, o spausdinimo laikas šiek tiek trumpesnis." msgid "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer height. This results in slightly visible layer lines but shorter print time." msgstr "Palyginti su numatytuoju 0,2 mm purkštuko profiliu, jo sluoksnio aukštis yra didesnis, todėl šiek tiek matomos sluoksnio linijos, tačiau trumpesnis spausdinimo laikas." msgid "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height. This results in almost invisible layer lines and higher print quality but longer print time." msgstr "Palyginti su numatytuoju 0,2 mm purkštuko profiliu, jo sluoksnio aukštis yra mažesnis. Dėl to sluoksnių linijos yra beveik nematomos, o spausdinimo kokybė yra geresnė, tačiau spausdinimo laikas yra ilgesnis." msgid "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. This results in almost invisible layer lines and much higher print quality but much longer print time." msgstr "Palyginti su numatytuoju 0,2 mm purkštuko profiliu, šis profilis pasižymi mažesnėmis sluoksnių linijomis, mažesniu greičiu bei pagreičiu, o retas užpildymo raštas (sparse infill) yra „Gyroid“. Dėl to sluoksnių linijos tampa beveik nematomos, o spausdinimo kokybė – daug aukštesnė, tačiau spausdinimas trunka daug ilgiau." msgid "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height. This results in minimal layer lines and higher print quality but longer print time." msgstr "Palyginti su numatytuoju 0,2 mm purkštuko profiliu, jo sluoksnio aukštis yra mažesnis. Dėl to sluoksnių linijos yra minimalios, o spausdinimo kokybė geresnė, tačiau spausdinimo laikas ilgesnis." msgid "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. This results in minimal layer lines and much higher print quality but much longer print time." msgstr "Palyginti su numatytuoju 0,2 mm purkštuko profiliu, šis profilis pasižymi mažesnėmis sluoksnių linijomis, mažesniu greičiu bei pagreičiu, o retas užpildymo raštas (sparse infill) yra „Gyroid“. Tai sumažina sluoksnių linijas iki minimumo ir užtikrina daug aukštesnę spausdinimo kokybę, tačiau spausdinimas trunka daug ilgiau." msgid "It has a normal layer height. This results in average layer lines and print quality. It is suitable for most printing cases." msgstr "Jo sluoksnio aukštis yra normalus. Dėl to gaunamos vidutinės sluoksnio linijos ir spausdinimo kokybė. Jis tinka daugumai spausdinimo atvejų." msgid "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops and a higher sparse infill density. This results in higher print strength but more filament consumption and longer print time." msgstr "Palyginti su numatytuoju 0,4 mm purkštuko profiliu, šis profilis turi daugiau sienelių kontūrų (wall loops) ir didesnį reto užpildymo tankį (sparse infill density). Dėl to spaudiniai yra tvirtesni, tačiau sunaudojama daugiau gijos ir pailgėja spausdinimo laikas." msgid "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height. This results in more apparent layer lines and lower print quality, but slightly shorter print time." msgstr "Palyginti su numatytuoju 0,4 mm purkštuko profiliu, jo sluoksnio aukštis yra didesnis, todėl matomos ryškesnės sluoksnio linijos ir prastesnė spausdinimo kokybė, tačiau šiek tiek trumpesnis spausdinimo laikas." msgid "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height. This results in more apparent layer lines and lower print quality, but shorter print time." msgstr "Palyginti su numatytuoju 0,4 mm purkštuko profiliu, jo sluoksnio aukštis yra didesnis, todėl matomos ryškesnės sluoksnio linijos ir prastesnė spausdinimo kokybė, tačiau trumpesnis spausdinimo laikas." msgid "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height. This results in less apparent layer lines and higher print quality but longer print time." msgstr "Palyginti su numatytuoju 0,4 mm purkštuko profiliu, jo sluoksnio aukštis yra mažesnis, todėl mažiau matomos sluoksnio linijos ir geresnė spausdinimo kokybė, tačiau ilgesnis spausdinimo laikas." msgid "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. This results in less apparent layer lines and much higher print quality but much longer print time." msgstr "Palyginti su numatytuoju 0,4 mm purkštuko profiliu, šis profilis pasižymi mažesniu sluoksnio aukščiu, mažesniu greičiu bei pagreičiu, o retas užpildymo raštas (sparse infill) yra „Gyroid“. Tai padaro sluoksnių linijas mažiau pastebimas ir užtikrina daug aukštesnę spausdinimo kokybę, tačiau spausdinimas trunka daug ilgiau." msgid "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height. This results in almost negligible layer lines and higher print quality but longer print time." msgstr "Palyginti su numatytuoju 0,4 mm purkštuko profiliu, jo sluoksnio aukštis yra mažesnis, todėl sluoksnio linijos beveik nežymios, spausdinimo kokybė geresnė, tačiau spausdinimo laikas ilgesnis." msgid "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. This results in almost negligible layer lines and much higher print quality but much longer print time." msgstr "Palyginti su numatytuoju 0,4 mm purkštuko profiliu, šis profilis pasižymi mažesniu sluoksnio aukščiu, mažesniu greičiu bei pagreičiu, o retas užpildymo raštas (sparse infill) yra „Gyroid“. Dėl to sluoksnių linijos tampa beveik nepastebimos, o spausdinimo kokybė – daug aukštesnė, tačiau spausdinimas trunka daug ilgiau." msgid "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height. This results in almost negligible layer lines and longer print time." msgstr "Palyginti su numatytuoju 0,4 mm purkštuko profiliu, jis turi mažesnį sluoksnio aukštį, todėl sluoksnio linijos yra beveik nežymios, o spausdinimo laikas ilgesnis." msgid "It has a big layer height. This results in apparent layer lines and ordinary print quality and print time." msgstr "Jis pasižymi dideliu sluoksnio aukščiu, todėl matomos sluoksnio linijos ir įprasta spausdinimo kokybė bei spausdinimo laikas." msgid "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops and a higher sparse infill density. This results in higher print strength but more filament consumption and longer print time." msgstr "Palyginti su numatytuoju 0,6 mm purkštuko profiliu, šis profilis turi daugiau sienelių kontūrų (wall loops) ir didesnį reto užpildymo tankį (sparse infill density). Dėl to spaudiniai yra tvirtesni, tačiau sunaudojama daugiau gijos ir pailgėja spausdinimo laikas." msgid "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height. This results in more apparent layer lines and lower print quality, but shorter print time in some cases." msgstr "Palyginti su numatytuoju 0,6 mm purkštuko profiliu, jo sluoksnio aukštis yra didesnis, todėl sluoksnių linijos yra ryškesnės, o spausdinimo kokybė žemesnė, tačiau kai kuriais atvejais sutrumpėja spausdinimo laikas." msgid "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height. This results in much more apparent layer lines and much lower print quality, but shorter print time in some cases." msgstr "Palyginti su numatytuoju 0,6 mm purkštuko profiliu, jo sluoksnio aukštis yra didesnis, todėl sluoksnių linijos yra daug ryškesnės, o spausdinimo kokybė daug žemesnė, tačiau kai kuriais atvejais sutrumpėja spausdinimo laikas." msgid "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height. This results in less apparent layer lines and slight higher print quality but longer print time." msgstr "Palyginti su numatytuoju 0,6 mm purkštuko profiliu, jo sluoksnio aukštis yra mažesnis, todėl mažiau matomos sluoksnių linijos ir šiek tiek geresnė spausdinimo kokybė, tačiau ilgesnis spausdinimo laikas." msgid "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height. This results in less apparent layer lines and higher print quality but longer print time." msgstr "Palyginti su numatytuoju 0,6 mm purkštuko profiliu, jo sluoksnio aukštis yra mažesnis, todėl mažiau matomos sluoksnių linijos ir geresnė spausdinimo kokybė, tačiau ilgesnis spausdinimo laikas." msgid "It has a very big layer height. This results in very apparent layer lines, low print quality and shorter print time." msgstr "Jo sluoksnio aukštis yra labai didelis. Dėl to sluoksnių linijos yra labai ryškios, spausdinimo kokybė prasta, o spausdinimo laikas trumpesnis." msgid "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height. This results in very apparent layer lines and much lower print quality, but shorter print time in some cases." msgstr "Palyginti su numatytuoju 0,8 mm purkštuvo profiliu, jo sluoksnio aukštis yra didesnis. Dėl to sluoksnių linijos yra labai aiškios, o spausdinimo kokybė žymiai prastesnė, tačiau kai kuriais atvejais spausdinimo laikas yra trumpesnis." msgid "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger layer height. This results in extremely apparent layer lines and much lower print quality, but much shorter print time in some cases." msgstr "Palyginti su numatytuoju 0,8 mm purkštuvo profiliu, jo sluoksnio aukštis yra daug didesnis. Dėl to sluoksnių linijos tampa labai ryškios, o spausdinimo kokybė – žymiai prastesnė, tačiau kai kuriais atvejais spausdinimo laikas sutrumpėja." msgid "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height. This results in slightly less but still apparent layer lines and slightly higher print quality but longer print time in some cases." msgstr "Palyginti su numatytuoju 0,8 mm purkštuko profiliu, jo sluoksnio aukštis yra šiek tiek mažesnis, todėl sluoksnių linijos yra šiek tiek mažiau pastebimos (bet vis dar matomos), o spausdinimo kokybė šiek tiek geresnė, tačiau kai kuriais atvejais pailgėja spausdinimo laikas." msgid "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer height. This results in less but still apparent layer lines and slightly higher print quality but longer print time in some cases." msgstr "Palyginti su numatytuoju 0,8 mm purkštuko profiliu, jo sluoksnio aukštis yra mažesnis, todėl sluoksnių linijos yra mažiau pastebimos (bet vis dar matomos), o spausdinimo kokybė šiek tiek geresnė, tačiau kai kuriais atvejais pailgėja spausdinimo laikas." msgid "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances." msgstr "Tai nėra nei dažnai naudojama gija, nei viena iš „Bambu“ gijų, be to, ji labai skiriasi priklausomai od prekės ženklo. Todėl prieš spausdinant primygtinai rekomenduojama pasiteirauti jos tiekėjo tinkamo profilio ir pakoreguoti kai kuriuos parametrus atsižvelgiant į gijos savybes." msgid "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials." msgstr "Spausdinant šią giją kyla deformavimosi (warping) ir prasto sluoksnių sukibimo tvirtumo rizika. Norėdami pasiekti geresnių rezultatų, skaitykite šį „Wiki“ puslapį: „Aukštos temperatūros ir inžinerinių medžiagų spausdinimo patarimai“." msgid "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials." msgstr "Spausdinant šią giją kyla purkštuko užsikimšimo, medžiagos nutekėjimo (oozing), deformavimosi (warping) ir prasto sluoksnių sukibimo tvirtumo rizika. Norėdami pasiekti geresnių rezultatų, skaitykite šį „Wiki“ puslapį: „Aukštos temperatūros ir inžinerinių medžiagų spausdinimo patarimai“." msgid "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG." msgstr "Norėdami išgauti geresnį skaidrumo ar peršviečiamumo rezultatą su atitinkama gija, skaitykite šį „Wiki“ puslapį: „Skaidraus PETG spausdinimo patarimai“." msgid "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing." msgstr "Norėdami, kad spaudiniai labiau blizgėtų, prieš naudodami išdžiovinkite giją, o pjaustyklėje (slicing) nustatykite 40–60 mm/s išorinės sienelės greitį." msgid "This filament is only used to print models with a low density usually, and some special parameters are required. To get better printing quality, please refer to this wiki: Instructions for printing RC model with foaming PLA (PLA Aero)." msgstr "Ši gija paprastai naudojama tik mažo tankio modeliams spausdinti, tam reikalingi specialūs parametrai. Norėdami gauti geresnę spausdinimo kokybę, skaitykite šį „Wiki“ puslapį: „RC modelių spausdinimo su putojančiu PLA (PLA Aero) instrukcijos“." msgid "This filament is only used to print models with a low density usually, and some special parameters are required. To get better printing quality, please refer to this wiki: ASA Aero Printing Guide." msgstr "Ši gija paprastai naudojama tik mažo tankio modeliams spausdinti, tam reikalingi specialūs parametrai. Norėdami gauti geresnę spausdinimo kokybę, skaitykite šį „Wiki“ puslapį: „ASA Aero spausdinimo gidas“." msgid "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide." msgstr "Ši gija yra per minkšta ir nesuderinama su AMS sistema. Jos spausdinimui keliama daug reikalavimų, todėl norėdami gauti geresnę kokybę, skaitykite šį „Wiki“ puslapį: „TPU spausdinimo gidas“." msgid "This filament has high enough hardness (about 67D) and is compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide." msgstr "Ši gija yra pakankamai keta (apie 67D) ir yra suderinama su AMS sistema. Jos spausdinimui keliama daug reikalavimų, todėl norėdami gauti geresnę kokybę, skaitykite šį „Wiki“ puslapį: „TPU spausdinimo gidas“." msgid "If you are to print a kind of soft TPU, please don't slice with this profile, and it is only for TPU that has high enough hardness (not less than 55D) and is compatible with the AMS. To get better printing quality, please refer to this wiki: TPU printing guide." msgstr "Jei ketinate spausdinti minkšto tipo TPU, nepjaustykite modelio naudodami šį profilį – jis skirtas tik pakankamai kietam TPU (ne mažiau kaip 55D), kuris yra suderinamas su AMS sistema. Norėdami gauti geresnę kokybę, skaitykite šį „Wiki“ puslapį: „TPU spausdinimo gidas“." msgid "This is a water-soluble support filament, and usually it is only for the support structure and not for the model body. Printing this filament is of many requirements, and to get better printing quality, please refer to this wiki: PVA Printing Guide." msgstr "Tai vandenyje tirpi gija palaikančioms konstrukcijoms (supports), paprastai ji naudojama tik atramoms, o ne pačiam modelio korpusui. Šios gijos spausdinimui keliama daug reikalavimų, todėl norėdami gauti geresnę kokybę, skaitykite šį „Wiki“ puslapį: „PVA spausdinimo gidas“." msgid "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function." msgstr "Tai vandenyje netirpi gija palaikančioms konstrukcijoms (supports), paprastai ji naudojama tik atramoms, o ne pačiam modelio korpusui. Norėdami gauti geresnę kokybę, skaitykite šį „Wiki“ puslapį: „Palaikančiųjų gijų ir atramų funkcijos spausdinimo patarimai“." msgid "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets." msgstr "Generiniai (bendrieji) profiliai yra suderinti konservatyviai, kad tiktų kuo platesniam gijų asortimentui. Norėdami pasiekti geresnės spausdinimo kokybės ir didesnio greičio, naudokite „Bambu“ gijas su joms skirtais „Bambu“ profiliais." msgid "High quality profile for 0.2mm nozzle, prioritizing print quality." msgstr "Aukštos kokybės profilis 0,2 mm purkštukui, teikiantis pirmenybę spausdinimo kokybei." msgid "High quality profile for 0.16mm layer height, prioritizing print quality and strength." msgstr "Aukštos kokybės profilis 0,16 mm sluoksnio aukščiui, teikiantis pirmenybę spausdinimo kokybei ir tvirtumui." msgid "Standard profile for 0.16mm layer height, prioritizing speed." msgstr "Standartinis profilis 0,16 mm sluoksnio aukščiui, teikiantis pirmenybę greičiui." msgid "High quality profile for 0.2mm layer height, prioritizing strength and print quality." msgstr "Aukštos kokybės profilis 0,2 mm sluoksnio aukščiui, teikiantis pirmenybę tvirtumui ir spausdinimo kokybei." msgid "Standard profile for 0.4mm nozzle, prioritizing speed." msgstr "Standartinis profilis 0,4 mm purkštukui, teikiantis pirmenybę greičiui." msgid "High quality profile for 0.6mm nozzle, prioritizing print quality and strength." msgstr "Aukštos kokybės profilis 0,6 mm purkštukui, teikiantis pirmenybę spausdinimo kokybei ir tvirtumui." msgid "Strength profile for 0.6mm nozzle, prioritizing strength." msgstr "Tvirtumo profilis 0,6 mm purkštukui, teikiantis pirmenybę konstrukcijos tvirtumui." msgid "Standard profile for 0.6mm nozzle, prioritizing speed." msgstr "Standartinis profilis 0,6 mm purkštukui, teikiantis pirmenybę greičiui." msgid "High quality profile for 0.8mm nozzle, prioritizing print quality." msgstr "Aukštos kokybės profilis 0,8 mm purkštukui, teikiantis pirmenybę spausdinimo kokybei." msgid "Strength profile for 0.8mm nozzle, prioritizing strength." msgstr "Tvirtumo profilis 0,8 mm purkštukui, teikiantis pirmenybę konstrukcijos tvirtumui." msgid "Standard profile for 0.8mm nozzle, prioritizing speed." msgstr "Standartinis profilis 0,8 mm purkštukui, teikiantis pirmenybę greičiui." msgid "No AMS" msgstr "Be AMS" msgid "There is no device available to send printing." msgstr "Nėra įrenginio, kuriam būtų galima siųsti spausdinti." msgid "The number of printers in use simultaneously cannot be equal to 0." msgstr "Vienu metu naudojamų spausdintuvų skaičius negali būti lygus 0." msgid "Use External Spool" msgstr "Naudoti išorinę ritę" msgid "Select Printers" msgstr "Pasirinkite spausdintuvus" msgid "Device Name" msgstr "Įrenginio pavadinimas" msgid "Device Status" msgstr "Įrenginio būsena" msgid "AMS Status" msgstr "AMS būsena" msgid "Please select the devices you would like to manage here (up to 6 devices)" msgstr "Prašome pasirinkti įrenginius, kurios norėsite čia valdyti (iki 6 įrenginių)" msgid "Printing Options" msgstr "Spausdinimo parinktys" msgid "Flow Dynamic Calibration" msgstr "Dinaminis srauto kalibravimas (K-factor)" msgid "Send Options" msgstr "Siuntimo parinktys" msgid "Send to" msgstr "Siųsti į" msgid "printers at the same time. (It depends on how many devices can undergo heating at the same time.)" msgstr "spausdintuvus vienu metu. (Priklauso nuo to, kiek įrenginių gali būti kaitinama vienu metu.)" msgid "Wait" msgstr "Laukti" msgid "minute each batch. (It depends on how long it takes to complete heating.)" msgstr "minutę kiekvienai partijai. (Priklauso nuo to, kiek laiko trunka įkaitinimas.)" msgid "Task Sending" msgstr "Užduotis siunčiama" msgid "Task Sent" msgstr "Užduotis nusiųsta" msgid "Edit multiple printers" msgstr "Redaguoti kelis spausdintuvus" msgid "Select connected printers (0/6)" msgstr "Pasirinkite prijungtus spausdintuvus (0/6)" #, c-format, boost-format msgid "Select Connected Printers (%d/6)" msgstr "Pasirinkite prijungtus spausdintuvus (%d/6)" #, c-format, boost-format msgid "The maximum number of printers that can be selected is %d" msgstr "Didžiausias pasirenkamų spausdintuvų skaičius yra %d" msgid "No task" msgstr "Nėra užduočių" msgid "Edit Printers" msgstr "Redaguoti spausdintuvus" msgid "Task Name" msgstr "Užduoties pavadinimas" msgid "Actions" msgstr "Veiksmai" msgid "Task Status" msgstr "Užduoties būsena" msgid "Sent Time" msgstr "Siuntimo laikas" msgid "There are no tasks to be sent!" msgstr "Čia nėra galimų siųsti užduočių!" msgid "No historical tasks!" msgstr "Be istorinių užduočių!" msgid "Upgrading" msgstr "Atnaujinama" msgid "Syncing" msgstr "Sinchronizuojama" msgid "Printing Finish" msgstr "Spausdinimas baigtas" msgid "Printing Failed" msgstr "Spausdinimas nepavyko" msgid "Printing Pause" msgstr "Spausdinimo pauzė" msgid "Pending" msgstr "Laukiama" msgid "Sending" msgstr "Siunčiama" msgid "Sending Finish" msgstr "Siuntimas baigtas" msgid "Sending Cancel" msgstr "Siuntimas atšauktas" msgid "Sending Failed" msgstr "Siuntimas nepavyko" msgid "Print Success" msgstr "Sėkmingai atspausdinta" msgid "Print Failed" msgstr "Spausdinimas nepavyko" msgid "Removed" msgstr "Pašalinta" # AI Translated msgid "Enable smart filament assign: Assign one filament to multiple nozzles to maximize savings" msgstr "Įjungti išmanųjį gijos priskyrimą: priskirkite vieną giją keliems purkštukams, kad sutaupytumėte kuo daugiau" # AI Translated msgid "Fila Saving" msgstr "Gijos taupymas" msgid "Don't remind me again" msgstr "Daugiau neberodyti šio priminimo" msgid "No further pop-up will appear. You can reopen it in 'Preferences'" msgstr "Iškylantieji langai daugiau nebus rodomi. Juos vėl galite įjungti „Nuostatose“" msgid "Filament-Saving Mode" msgstr "Gijos taupymo režimas" msgid "Convenience Mode" msgstr "Patogumo režimas" msgid "Custom Mode" msgstr "Pasirinktinis režimas" msgid "Generates filament grouping for the left and right nozzles based on the most filament-saving principles to minimize waste." msgstr "Sugrupuoja kairiojo ir dešiniojo purkštukų gijas remiantis maksimalaus taupymo principais, kad būtų sumažintas gijos likučių kiekis." msgid "Generates filament grouping for the left and right nozzles based on the printer's actual filament status, reducing the need for manual filament adjustment." msgstr "Sugrupuoja kairiojo ir dešiniojo purkštukų gijas atsižvelgiant į faktinę spausdintuvo gijų būseną, taip sumažinant poreikį rankiniu būdu keisti gijas." msgid "Manually assign filament to the left or right nozzle" msgstr "Rankiniu būdu priskirti giją kairiajam arba dešiniajam purkštukui" msgid "Global settings" msgstr "Visuotiniai nustatymai" msgid "Video tutorial" msgstr "Vaizdo pamoka" msgid "(Sync with printer)" msgstr "(Sinchronizuoti su spausdintuvu)" # AI Translated #, c-format, boost-format msgid "Error: %s extruder has no available %s nozzle, current group result is invalid." msgstr "Klaida: %s ekstruderis neturi prieinamo %s purkštuko, dabartinis grupavimo rezultatas negalioja." msgid "We will slice according to this grouping method:" msgstr "Pjaustymas bus atliekamas pagal šį priskyrimo metodą:" msgid "Tip: You can drag the filaments to reassign them to different nozzles." msgstr "Patarimas: galite vilkti gijas, kad priskirtumėte jas kitiems purkštukams." # AI Translated msgid "Please adjust your grouping or click " msgstr "Pakoreguokite grupavimą arba spustelėkite " # AI Translated msgid " to set nozzle count" msgstr " purkštukų skaičiui nustatyti" # AI Translated msgid "Set the physical nozzle count..." msgstr "Nustatykite fizinį purkštukų skaičių..." msgid "The filament grouping method for current plate is determined by the dropdown option at the slicing plate button." msgstr "Dabartinio pagrindo gijų priskyrimo metodą lemia išskleidžiamojo sąrašo parinktis, esanti prie pagrindo pjaustymo mygtuko." msgid "Connected to Obico successfully!" msgstr "Sėkmingai prisijungta prie \"Obico\"!" msgid "Could not connect to Obico" msgstr "Nepavyko prisijungti prie „Obico“" msgid "Connected to SimplyPrint successfully!" msgstr "Sėkmingai prisijungta prie \"SimplyPrint\"!" msgid "Could not connect to SimplyPrint" msgstr "Nepavyko prisijungti prie „SimplyPrint“" msgid "Internal error" msgstr "Vidinė klaida" msgid "Unknown error" msgstr "Nežinoma klaida" msgid "SimplyPrint account not linked. Go to Connect options to set it up." msgstr "\"SimplyPrint\" paskyra nesusieta. Eikite į Prisijungimo parinktis ir ją nustatykite." msgid "Flashforge returned an invalid JSON response." msgstr "„Flashforge“ grąžino negaliojantį JSON atsakymą." msgid "No Flashforge printers were discovered on the local network." msgstr "Vietiniame tinkle nerasta jokių „Flashforge“ spausdintuvų." msgid "Connected to Flashforge local API successfully." msgstr "Sėkmingai prisijungta prie „Flashforge“ vietinės API." msgid "Serial connection to Flashforge is working correctly." msgstr "Nuoseklusis ryšys su „Flashforge“ veikia tinkamai." msgid "Could not connect to Flashforge local API" msgstr "Nepavyko prisijungti prie „Flashforge“ vietinės API" msgid "Could not connect to Flashforge via serial" msgstr "Nepavyko prisijungti prie „Flashforge“ per nuoseklųjį prievadą" msgid "Flashforge local API requires both serial number and access code." msgstr "„Flashforge“ vietinei API reikalingas ir serijos numeris, ir prieigos kodas." msgid "Printer returned an error" msgstr "Spausdintuvas grąžino klaidą" msgid "Missing system_info in response" msgstr "Atsakyme trūksta „system_info“" msgid "Missing printer serial number in response" msgstr "Atsakyme trūksta spausdintuvo serijos numerio" msgid "Error parsing response" msgstr "Klaida analizuojant atsakymą" msgid "ElegooLink not detected" msgstr "„ElegooLink“ neaptikta" msgid "Invalid access code" msgstr "Neteisingas prieigos kodas" msgid "CC2 device not detected" msgstr "CC2 įrenginys neaptiktas" msgid "Connection to ElegooLink is working correctly." msgstr "Ryšys su „ElegooLink“ veikia tinkamai." msgid "Could not connect to ElegooLink" msgstr "Nepavyko prisijungti prie „ElegooLink“" #, boost-format msgid "Error code: %1%" msgstr "Klaidos kodas: %1%" msgid "Upload failed" msgstr "Įkėlimas nepavyko" msgid "The file has been transferred, but some unknown errors occurred. Please check the device page for the file and try to start printing again." msgstr "Failas buvo perduotas, tačiau įvyko nežinomų klaidų. Patikrinkite failą įrenginio puslapyje ir bandykite paleisti spausdinimą iš naujo." msgid "Failed to open file for upload." msgstr "Nepavyko atverti failo įkėlimui." msgid "Failed to read file chunk for upload." msgstr "Nepavyko nuskaityti failo dalies įkėlimui." msgid "CC2 upload failed" msgstr "CC2 įkėlimas nepavyko" msgid "The file is empty or could not be read." msgstr "Failas yra tuščias arba jo nepavyko nuskaityti." msgid "Failed to calculate file checksum." msgstr "Nepavyko apskaičiuoti failo kontrolinės sumos." msgid "Error code not found" msgstr "Klaidos kodas nerastas" msgid "The printer is busy, please check the device page for the file and try to start printing again." msgstr "Spausdintuvas užimtas. Patikrinkite failą įrenginio puslapyje ir bandykite paleisti spausdinimą iš naujo." msgid "The file is lost, please check and try again." msgstr "Failas prarastas, patikrinkite ir bandykite dar kartą." msgid "The file is corrupted, please check and try again." msgstr "Failas sugadintas, patikrinkite ir bandykite dar kartą." msgid "Transmission abnormality, please check and try again." msgstr "Perdavimo sutrikimas, patikrinkite ir bandykite dar kartą." msgid "The file does not match the printer, please check and try again." msgstr "Failas neatitinka spausdintuvo, patikrinkite ir bandykite dar kartą." msgid "Start print timeout" msgstr "Viršytas spausdinimo paleidimo laikas" msgid "Start print failed" msgstr "Spausdinimo paleidimo klaida" msgid "Connected to CrealityPrint successfully!" msgstr "Sėkmingai prisijungta prie „CrealityPrint“!" msgid "Could not connect to CrealityPrint" msgstr "Nepavyko prisijungti prie „CrealityPrint“" msgid "Connection timed out. Please check if the printer and computer network are functioning properly, and confirm that they are on the same network." msgstr "Baigėsi prisijungimo laikas. Patikrinkite, ar spausdintuvo ir kompiuterio tinklas veikia tinkamai, ir įsitikinkite, kad jie yra tame pačiame tinkle." msgid "The Hostname/IP/URL could not be parsed, please check it and try again." msgstr "Nepavyko išanalizuoti mazgo vardo / IP / URL, patikrinkite ir bandykite dar kartą." msgid "File/data transfer interrupted. Please check the printer and network, then try it again." msgstr "Failo / duomenų perdavimas nutrūko. Patikrinkite spausdintuvą bei tinklą ir bandykite dar kartą." msgid "The provided state is not correct." msgstr "Pateikta būsena neteisinga." msgid "Please give the required permissions when authorizing this application." msgstr "Įgaliodami šią programą suteikite reikiamus leidimus." msgid "Something unexpected happened when trying to log in, please try again." msgstr "Bandant prisijungti įvyko kažkas netikėto. Bandykite dar kartą." msgid "User canceled." msgstr "Vartotojas atšaukė." msgid "Head diameter" msgstr "Galvutės skersmuo" msgid "Max angle" msgstr "Maksimalus kampas" msgid "Detection radius" msgstr "Aptikimo spindulys" msgid "Selected" msgstr "Pasirinkta" msgid "Auto-generate" msgstr "Automatiškai sugeneruoti" msgid "Generate brim ears using Max angle and Detection radius" msgstr "Sugeneruoti krašto „ausis“ naudojant maksimalų kampą ir aptikimo spindulį" msgid "Add or Select" msgstr "Pridėti arba pasirinkti" msgid "Warning: The brim type is not set to \"painted\", the brim ears will not take effect!" msgstr "Įspėjimas: Jei krašto tipas nenustatytas kaip „pieštas“, krašto \"ausys\" nebus įjungtos!" msgid "Set the brim type of this object to \"painted\"" msgstr "Nustatykite šio objekto krašto tipą kaip „pieštas“" msgid "invalid brim ears" msgstr "negaliojančios krašto „ausys“" msgid "Brim Ears" msgstr "Krašto \"ausys\"" msgid "Please select single object." msgstr "Pasirinkite vieną objektą." msgid "Entering Brim Ears" msgstr "Įeinama į krašto „ausų“ režimą" msgid "Leaving Brim Ears" msgstr "Išeinama iš krašto „ausų“ režimo" msgid "Zoom Out" msgstr "Nutolinti" msgid "Zoom In" msgstr "Artinti" msgid "Load skipping objects information failed. Please try again." msgstr "Nepavyko įkelti praleidžiamų objektų informacijos. Bandykite dar kartą." msgid "Failed to create the temporary folder." msgstr "Nepavyko sukurti laikinojo aplanko." #, c-format, boost-format msgid "/%d Selected" msgstr "/Pasirinkta: %d" msgid "Nothing selected" msgstr "Nieko nepasirinkta" msgid "Over 64 objects in single plate" msgstr "Viename pagrinde yra daugiau nei 64 objektai" msgid "The current print job cannot be skipped" msgstr "Dabartinės spausdinimo užduoties negalima praleisti" msgid "Skipping all objects." msgstr "Praleidžiami visi objektai." msgid "The printing job will be stopped. Continue?" msgstr "Spausdinimo užduotis bus sustabdyta. Tęsti?" #, c-format, boost-format msgid "Skipping %d objects." msgstr "Praleidžiama objektų: %d." msgid "This action cannot be undone. Continue?" msgstr "Šio veiksmo atšaukti nebus galima. Tęsti?" msgid "Skipping objects." msgstr "Praleidžiami objektai." msgid "Select Filament" msgstr "Pasirinkti giją" msgid "Null Color" msgstr "Be spalvos" msgid "Multiple Color" msgstr "Daugiaspalvis" msgid "Official Filament" msgstr "Oficiali gija" msgid "More Colors" msgstr "Daugiau spalvų" msgid "Network Plug-in Update Available" msgstr "Yra tinklo papildinio atnaujinimas" msgid "Bambu Network Plug-in Required" msgstr "Reikalingas „Bambu“ tinklo papildinys" msgid "The Bambu Network Plug-in is corrupted or incompatible. Please reinstall it." msgstr "„Bambu“ tinklo papildinys yra sugadintas arba nesuderinamas. Įdiekite jį iš naujo." msgid "The Bambu Network Plug-in is required for cloud features, printer discovery, and remote printing." msgstr "„Bambu“ tinklo papildinys yra būtinas, kad veiktų debesijos funkcijos, spausdintuvo aptikimas ir nuotolinis spausdinimas." #, c-format, boost-format msgid "Error: %s" msgstr "Klaida: %s" msgid "Show details" msgstr "Rodyti išsamiau" # AI Translated msgid "Hide details" msgstr "Slėpti išsamią informaciją" msgid "Version to install:" msgstr "Diegiama versija:" msgid "Download and Install" msgstr "Atsisiųsti ir įdiegti" msgid "A new version of the Bambu Network Plug-in is available." msgstr "Išleista nauja „Bambu“ tinklo papildinio versija." #, c-format, boost-format msgid "Current version: %s" msgstr "Dabartinė versija: %s" msgid "Update to version:" msgstr "Atnaujinti iki versijos:" msgid "Don't Ask Again" msgstr "Daugiau neklausti" msgid "Update Now" msgstr "Atnaujinti dabar" msgid "(Latest)" msgstr "(Naujausia)" # AI Translated msgid "(installed)" msgstr "(įdiegta)" msgid "The Bambu Network Plug-in has been installed successfully." msgstr "„Bambu“ tinklo papildinys sėkmingai įdiegtas." msgid "A restart is required to load the new plug-in. Would you like to restart now?" msgstr "Norint įkelti naują papildinį, programą reikia paleisti iš naujo. Ar norite paleisti dabar?" msgid "Restart Now" msgstr "Paleisti iš naujo dabar" msgid "NO RAMMING AT ALL" msgstr "VISIŠKAI NENAUDOTI SUTANKINIMO" msgid "Volumetric speed" msgstr "Tūrinis greitis" msgid "Step file import parameters" msgstr "STEP failų importavimo parametrai" msgid "Smaller linear and angular deflections result in higher-quality transformations but increase the processing time." msgstr "Mažesni linijiniai ir kampiniai nuokrypiai užtikrina aukštesnės kokybės transformacijas, tačiau pailgina apdorojimo laiką." msgid "Linear Deflection" msgstr "Linijinis nuokrypis" msgid "Please input a valid value (0.001 < linear deflection < 0.1)" msgstr "Įveskite galiojančią reikšmę (0,001 < linijinis nuokrypis < 0,1)" msgid "Angle Deflection" msgstr "Kampinis nuokrypis" msgid "Please input a valid value (0.01 < angle deflection < 1.0)" msgstr "Įveskite galiojančią reikšmę (0,01 < kampinis nuokrypis < 1,0)" msgid "Split compound and compsolid into multiple objects" msgstr "Skaidyti „compound“ ir „compsolid“ darinius į kelis objektus" msgid "Number of triangular facets" msgstr "Trikampių briaunų skaičius" msgid "Calculating, please wait..." msgstr "Skaičiuojama, palaukite..." msgid "Save these settings as default" msgstr "Išsaugoti kaip numatytuosius nustatymus." msgid "If enabled, the values above are stored as the defaults used for future STEP imports (and shown in Preferences)." msgstr "Jei įjungta, aukščiau nurodytos vertės yra išsaugomos kaip numatytosios, naudojamos būsimiems STEP importams (ir rodomos nustatymuose)." msgid "PresetBundle" msgstr "ProfiliųRinkinys" msgid "Bundle folder does not exist." msgstr "Rinkinio aplankas neegzistuoja." msgid "Failed to open folder." msgstr "Nepavyko atverti aplanko." msgid "Delete selected bundle from folder and all presets loaded from it?" msgstr "Ištrinti pasirinktą rinkinį iš aplanko ir visus iš jo įkeltus profilius?" msgid "Delete Bundle" msgstr "Ištrinti rinkinį" msgid "Failed to remove bundle." msgstr "Nepavyko pašalinti rinkinio." msgid "Remove Bundle" msgstr "Pašalinti rinkinį" msgid "Unsubscribe bundle?" msgstr "Atsisakyti rinkinio prenumeratos?" msgid "UnsubscribeBundle" msgstr "AtsisakytiRinkinioPrenumeratos" msgid "Failed to unsubscribe bundle." msgstr "Nepavyko atsisakyti rinkinio prenumeratos." msgid "Unsubscribe Bundle" msgstr "Atsisakyti rinkinio prenumeratos" msgid "ExportPresetBundle" msgstr "EksportuotiProfiliųRinkinį" msgid "Save preset bundle" msgstr "Išsaugoti profilių rinkinį" msgid "Performing desktop integration failed - boost::filesystem::canonical did not return appimage path." msgstr "Nepavyko atlikti integracijos su darbalaukiu – „boost::filesystem::canonical“ negrąžino „AppImage“ kelio." msgid "Performing desktop integration failed - Could not find executable." msgstr "Nepavyko atlikti integracijos su darbalaukiu – nepavyko rasti vykdomojo failo." msgid "Performing desktop integration failed because the application directory was not found." msgstr "Nepavyko atlikti integracijos su darbalaukiu, nes nerastas programos katalogas." msgid "Performing desktop integration failed - could not create Gcodeviewer desktop file. OrcaSlicer desktop file was probably created successfully." msgstr "Nepavyko atlikti integracijos su darbalaukiu – nepavyko sukurti „Gcodeviewer“ darbalaukio failo. „OrcaSlicer“ darbalaukio failas tikriausiai buvo sukurtas sėkmingai." msgid "Performing downloader desktop integration failed - boost::filesystem::canonical did not return appimage path." msgstr "Nepavyko atlikti parsisiuntimo įrankio integracijos su darbalaukiu – „boost::filesystem::canonical“ negrąžino „AppImage“ kelio." msgid "Performing downloader desktop integration failed - Could not find executable." msgstr "Nepavyko atlikti parsisiuntimo įrankio integracijos su darbalaukiu – nepavyko rasti vykdomojo failo." msgid "Performing downloader desktop integration failed because the application directory was not found." msgstr "Nepavyko atlikti parsisiuntimo įrankio integracijos su darbalaukiu, nes nerastas programos katalogas." msgid "Desktop Integration" msgstr "Integracija su darbalaukiu" msgid "" "Desktop Integration sets this binary to be searchable by the system.\n" "\n" "Press \"Perform\" to proceed." msgstr "" "Integracija su darbalaukiu nustato šį vykdomąjį failą taip, kad sistema galėtų jį rasti.\n" "\n" "Norėdami tęsti, paspauskite „Atlikti“." msgid "The download has failed" msgstr "Atsisiuntimas nepavyko" #. TRN %1% = file path #, boost-format msgid "Can't create file at %1%" msgstr "Nepavyko sukurti failo ties %1%" msgid "Archive preview" msgstr "Archyvo peržiūra" msgid "Open File" msgstr "Atverti failą" # AI Translated msgid "AMS Dryness Control" msgstr "AMS sausumo valdymas" # AI Translated msgid "Filament Drying Settings" msgstr "Gijos džiovinimo nustatymai" # AI Translated msgid "Stopping" msgstr "Stabdoma" # AI Translated msgid "Unable to dry temporarily due to ..." msgstr "Laikinai negalima džiovinti dėl ..." # AI Translated msgid "Drying Error" msgstr "Džiovinimo klaida" # AI Translated msgid "Please check the Assistant for troubleshooting" msgstr "Gedimų diagnozavimo ieškokite Asistente" # AI Translated msgid "Please remove and store the filament (as shown)." msgstr "Išimkite ir laikykite giją (kaip parodyta)." # AI Translated msgid "The AMS can rotate the filament which is properly stored, providing better drying results." msgstr "AMS gali sukti tinkamai laikomą giją, taip užtikrindamas geresnius džiovinimo rezultatus." # AI Translated msgid "Rotate spool when drying" msgstr "Sukti ritę džiovinant" # AI Translated msgctxt "amsdrying" msgid "Back" msgstr "Atgal" # AI Translated msgid "Drying-Heating" msgstr "Džiovinimas – kaitinimas" # AI Translated msgid "Drying-Dehumidifying" msgstr "Džiovinimas – sausinimas" # AI Translated msgid " maximum drying temperature is " msgstr " didžiausia džiovinimo temperatūra yra " # AI Translated msgid " minimum drying temperature is " msgstr " mažiausia džiovinimo temperatūra yra " # AI Translated msgid "This filament may not be completely dried." msgstr "Ši gija gali būti ne visiškai išdžiovinta." # AI Translated msgid "This AMS is currently printing. To ensure print quality, the drying temperature cannot exceed the recommended drying temperature." msgstr "Šis AMS šiuo metu spausdina. Siekiant užtikrinti spausdinimo kokybę, džiovinimo temperatūra negali viršyti rekomenduojamos džiovinimo temperatūros." # AI Translated msgid "The temperature shall not exceed the filament's heat distortion temperature" msgstr "Temperatūra neturi viršyti gijos šiluminio deformavimo temperatūros" # AI Translated msgid "Minimum time value cannot be less than 1." msgstr "Mažiausia laiko reikšmė negali būti mažesnė nei 1." # AI Translated msgid "Maximum time value cannot be greater than 24." msgstr "Didžiausia laiko reikšmė negali būti didesnė nei 24." # AI Translated msgid "Insufficient power" msgstr "Nepakankama galia" # AI Translated msgid " Too many AMS drying simultaneously. Please plug in the power or stop other drying processes before starting." msgstr " Vienu metu džiovinama per daug AMS. Prieš pradėdami prijunkite maitinimą arba sustabdykite kitus džiovinimo procesus." # AI Translated msgid "AMS is busy" msgstr "AMS užimtas" # AI Translated msgid " AMS is calibrating | reading RFID | loading/unloading material, please wait." msgstr " AMS kalibruoja | skaito RFID | įkelia/iškelia medžiagą, palaukite." # AI Translated msgid "Filament in AMS outlet" msgstr "Gija AMS išleidimo angoje" # AI Translated msgid " The high drying temperature may cause AMS blockage, please unload first." msgstr " Aukšta džiovinimo temperatūra gali užkimšti AMS, pirmiausia iškelkite giją." # AI Translated msgid "Initiating AMS drying" msgstr "Pradedamas AMS džiovinimas" # AI Translated msgid "Not supported in 2D mode" msgstr "Nepalaikoma 2D režime" # AI Translated msgid "Task in progress" msgstr "Užduotis vykdoma" # AI Translated msgid " The AMS might be in use during Task." msgstr " AMS gali būti naudojamas užduoties metu." # AI Translated msgid " Firmware update in progress, please wait..." msgstr " Vyksta programinės įrangos atnaujinimas, palaukite..." # AI Translated msgid " Please plug in the power and then use the drying function." msgstr " Prijunkite maitinimą ir tada naudokite džiovinimo funkciją." # AI Translated msgid " The high drying temperature may cause AMS blockage. Please unload the filament manually before proceeding." msgstr " Aukšta džiovinimo temperatūra gali užkimšti AMS. Prieš tęsdami rankiniu būdu iškelkite giją." # AI Translated msgid "System is busy" msgstr "Sistema užimta" # AI Translated msgid " Initiating other drying processes, please wait a few seconds..." msgstr " Pradedami kiti džiovinimo procesai, palaukite kelias sekundes..." # AI Translated msgid "For better drying results, remove the filament and allow it to rotate." msgstr "Geresniems džiovinimo rezultatams išimkite giją ir leiskite jai suktis." # AI Translated msgid "The AMS will automatically rotate the stored filament slots to enhance the drying performance." msgstr "AMS automatiškai suks laikomus gijų lizdus, kad pagerintų džiovinimo našumą." # AI Translated msgid "Alternatively, you can dry the filament without removing it." msgstr "Arba galite džiovinti giją jos neišimdami." # AI Translated msgid "Unknown filaments will be treated as PLA." msgstr "Nežinomos gijos bus traktuojamos kaip PLA." # AI Translated msgid "Please store the filament marked with an exclamation mark." msgstr "Laikykite giją, pažymėtą šauktuku." # AI Translated msgid "Filament left in the feeder during drying may soften because the drying temperature exceeds the softening point of materials like PLA and TPU." msgstr "Džiovinimo metu tiektuve palikta gija gali suminkštėti, nes džiovinimo temperatūra viršija tokių medžiagų kaip PLA ir TPU minkštėjimo tašką." # AI Translated msgid "Starting: Checking adapter connection" msgstr "Pradedama: tikrinamas adapterio prijungimas" # AI Translated msgid "Starting: Checking filament status" msgstr "Pradedama: tikrinama gijos būsena" # AI Translated msgid "Starting: Checking drying presets" msgstr "Pradedama: tikrinami džiovinimo profiliai" # AI Translated msgid "Starting: Checking filament location" msgstr "Pradedama: tikrinama gijos vieta" # AI Translated msgid "Starting: Checking air intake" msgstr "Pradedama: tikrinama oro įsiurbimo anga" # AI Translated msgid "Starting: Checking air vent" msgstr "Pradedama: tikrinama oro išleidimo anga" msgid "The filament may not be compatible with the current machine settings. Generic filament presets will be used." msgstr "Gija gali būti nesuderinama su dabartiniais įrenginio nustatymais. Bus naudojami bendrieji gijos profiliai." msgid "The filament model is unknown. Still using the previous filament preset." msgstr "Gijos modelis nežinomas. Toliau naudojamas ankstesnis gijos profilis." msgid "The filament model is unknown. Generic filament presets will be used." msgstr "Gijos modelis nežinomas. Bus naudojami bendrieji gijos profiliai." msgid "The filament may not be compatible with the current machine settings. A random filament preset will be used." msgstr "Gija gali būti nesuderinama su dabartiniais įrenginio nustatymais. Bus naudojamas atsitiktinis gijos profilis." msgid "The filament model is unknown. A random filament preset will be used." msgstr "Gijos modelis nežinomas. Bus naudojamas atsitiktinis gijos profilis." #: resources/data/hints.ini: [hint:Precise wall] msgid "" "Precise wall\n" "Did you know that turning on precise wall can improve precision and layer consistency?" msgstr "" "Tiksli sienelė\n" "Ar žinojote, kad įjungus tikslią sienelę galima pagerinti tikslumą ir sluoksnių nuoseklumą?" #: resources/data/hints.ini: [hint:Sandwich mode] msgid "" "Sandwich mode\n" "Did you know that you can use sandwich mode (inner-outer-inner) to improve precision and layer consistency if your model doesn't have very steep overhangs?" msgstr "" "Sumuštinio režimas\n" "Ar žinojote, kad galite naudoti daugiasluoksnį režimą (vidinis–išorinis–vidinis), kad padidintumėte tikslumą ir sluoksnių nuoseklumą, jei jūsų modelyje nėra labai stačių iškyšų?" #: resources/data/hints.ini: [hint:Chamber temperature] msgid "" "Chamber temperature\n" "Did you know that OrcaSlicer supports chamber temperature?" msgstr "" "Kameros temperatūra\n" "Ar žinojote, kad „OrcaSlicer“ palaiko kameros temperatūrą?" #: resources/data/hints.ini: [hint:Calibration] msgid "" "Calibration\n" "Did you know that calibrating your printer can do wonders? Check out our beloved calibration solution in OrcaSlicer." msgstr "" "Kalibravimas\n" "Ar žinojote, kad spausdintuvo kalibravimas gali padaryti stebuklus? Išbandykite mūsų mėgstamą kalibravimo sprendimą „OrcaSlicer“." #: resources/data/hints.ini: [hint:Auxiliary fan] msgid "" "Auxiliary fan\n" "Did you know that OrcaSlicer supports Auxiliary part cooling fan?" msgstr "" "Pagalbinis ventiliatorius\n" "Ar žinojote, kad „OrcaSlicer“ palaiko pagalbinį dalių aušinimo ventiliatorių?" #: resources/data/hints.ini: [hint:Air filtration] msgid "" "Air filtration/Exhaust Fan\n" "Did you know that OrcaSlicer can support Air filtration/Exhaust Fan?" msgstr "" "Oro filtravimas / išmetimo ventiliatorius\n" "Ar žinojote, kad „OrcaSlicer“ palaiko oro filtravimą ir išmetimo ventiliatorių?" #: resources/data/hints.ini: [hint:G-code window] msgid "" "G-code window\n" "You can turn on/off the G-code window by pressing the C key." msgstr "" "G-kodo langas\n" "G-kodo langą galite įjungti arba išjungti paspausdami klavišą C." #: resources/data/hints.ini: [hint:Switch workspaces] msgid "" "Switch workspaces\n" "You can switch between Prepare and Preview workspaces by pressing the Tab key." msgstr "" "Perjungti darbines erdves\n" "Paspaudę klavišą Tab, galite perjungti Paruošimo ir Peržiūros darbines erdves." #: resources/data/hints.ini: [hint:How to use keyboard shortcuts] msgid "" "How to use keyboard shortcuts\n" "Did you know that Orca Slicer offers a wide range of keyboard shortcuts and 3D scene operations?" msgstr "" "Kaip naudoti sparčiuosius klavišus\n" "Ar žinojote, kad „OrcaSlicer“ siūlo platų sparčiųjų klavišų ir 3D scenos operacijų pasirinkimą?" #: resources/data/hints.ini: [hint:Reverse on even] msgid "" "Reverse on even\n" "Did you know that Reverse on even feature can significantly improve the surface quality of your overhangs? However, it can cause wall inconsistencies so use carefully!" msgstr "" "Atvirkštinė kryptis lyginiuose sluoksniuose\n" "Ar žinojote, kad funkcija Atvirkštinė kryptis lyginiuose sluoksniuose gali gerokai pagerinti iškyšų paviršiaus kokybę? Tačiau ji gali sukelti sienelės netolygumų, todėl naudokite atsargiai!" #: resources/data/hints.ini: [hint:Cut Tool] msgid "" "Cut Tool\n" "Did you know that you can cut a model at any angle and position with the cutting tool?" msgstr "" "Pjovimo įrankis\n" "Ar žinojote, kad pjovimo įrankiu galite perpjauti modelį bet kokiu kampu ir bet kurioje padėtyje?" #: resources/data/hints.ini: [hint:Fix Model] msgid "" "Fix Model\n" "Did you know that you can fix a corrupted 3D model to avoid a lot of slicing problems on the Windows system?" msgstr "" "Taisyti modelį\n" "Ar žinojote, kad „Windows“ sistemoje galite pataisyti sugadintą 3D modelį ir taip išvengti daugybės pjaustymo problemų?" #: resources/data/hints.ini: [hint:Timelapse] msgid "" "Timelapse\n" "Did you know that you can generate a timelapse video during each print?" msgstr "" "Intervalinis fotografavimas (Timelapse)\n" "Ar žinojote, kad kiekvieno spausdinimo metu galite sugeneruoti intervalinio fotografavimo vaizdo įrašą?" #: resources/data/hints.ini: [hint:Auto-Arrange] msgid "" "Auto-Arrange\n" "Did you know that you can auto-arrange all the objects in your project?" msgstr "" "Automatinis išdėstymas\n" "Ar žinojote, kad galite automatiškai išdėstyti visus savo projekto objektus?" #: resources/data/hints.ini: [hint:Auto-Orient] msgid "" "Auto-Orient\n" "Did you know that you can rotate objects to an optimal orientation for printing with a simple click?" msgstr "" "Automatinis orientavimas\n" "Ar žinojote, kad vienu spustelėjimu galite pasukti objektus į optimalią padėtį spausdinimui?" #: resources/data/hints.ini: [hint:Lay on Face] msgid "" "Lay on Face\n" "Did you know that you can quickly orient a model so that one of its faces sits on the print bed? Select the \"Place on face\" function or press the F key." msgstr "" "Guldyti ant sienelės\n" "Ar žinojote, kad galite greitai suorientuoti modelį taip, kad viena iš jo sienelių priglustų prie spausdinimo pagrindo? Pasirinkite funkciją „Guldyti ant sienelės“ arba paspauskite klavišą F." #: resources/data/hints.ini: [hint:Object List] msgid "" "Object List\n" "Did you know that you can view all objects/parts in a list and change settings for each object/part?" msgstr "" "Objektų sąrašas\n" "Ar žinojote, kad galite peržiūrėti visus objektus bei dalis sąraše ir keisti kiekvieno objekto ar dalies nustatymus?" #: resources/data/hints.ini: [hint:Search Functionality] msgid "" "Search Functionality\n" "Did you know that you use the Search tool to quickly find a specific Orca Slicer setting?" msgstr "" "Paieškos funkcija\n" "Ar žinojote, kad naudodami paieškos įrankį galite greitai rasti konkretų „OrcaSlicer“ nustatymą?" #: resources/data/hints.ini: [hint:Simplify Model] msgid "" "Simplify Model\n" "Did you know that you can reduce the number of triangles in a mesh using the Simplify mesh feature? Right-click the model and select Simplify model." msgstr "" "Supaprastinti modelį\n" "Ar žinojote, kad galite sumažinti trikampių skaičių tinklelyje naudodami tinklelio supaprastinimo funkciją? Dešiniuoju pelės mygtuku spustelėkite modelį ir pasirinkite „Supaprastinti modelį“." #: resources/data/hints.ini: [hint:Slicing Parameter Table] msgid "" "Slicing Parameter Table\n" "Did you know that you can view all objects/parts on a table and change settings for each object/part?" msgstr "" "Pjaustymo parametrų lentelė\n" "Ar žinojote, kad lentelėje galite peržiūrėti visus objektus bei dalis ir keisti kiekvieno objekto ar dalies nustatymus?" #: resources/data/hints.ini: [hint:Split to Objects/Parts] msgid "" "Split to Objects/Parts\n" "Did you know that you can split a big object into small ones for easy colorizing or printing?" msgstr "" "Skaidymas į objektus / dalis\n" "Ar žinojote, kad didelį objektą galite suskaidyti į mažesnius, kad būtų lengviau jį nuspalvinti ar atspausdinti?" #: resources/data/hints.ini: [hint:Subtract a Part] msgid "" "Subtract a Part\n" "Did you know that you can subtract one mesh from another using the Negative part modifier? That way you can, for example, create easily resizable holes directly in Orca Slicer." msgstr "" "Atimti dalį\n" "Ar žinojote, kad galite atimti vieną tinklelį iš kito naudodami neigiamos dalies (Negative part) modifikatorių? Taip galite, pavyzdžiui, tiesiogiai „OrcaSlicer“ programoje kurti lengvai keičiamo dydžio skyles." #: resources/data/hints.ini: [hint:STEP] msgid "" "STEP\n" "Did you know that you can improve your print quality by slicing a STEP file instead of an STL?\n" "Orca Slicer supports slicing STEP files, providing smoother results than a lower resolution STL. Give it a try!" msgstr "" "STEP\n" "Ar žinojote, kad spausdinimo kokybę galite pagerinti pjaustydami ne STL, o STEP failą?\n" "„OrcaSlicer“ palaiko STEP failų pjaustymą, užtikrindama sklandesnius rezultatus nei mažos raiškos STL. Išbandykite!" #: resources/data/hints.ini: [hint:Z seam location] msgid "" "Z seam location\n" "Did you know that you can customize the location of the Z seam, and even paint it on your print, to have it in a less visible location? This improves the overall look of your model. Check it out!" msgstr "" "Z siūlės vieta\n" "Ar žinojote, kad galite pritaikyti Z siūlės vietą ir net užpiešti ją ant spaudinio, kad ji būtų mažiau matomoje vietoje? Tai pagerina bendrą modelio išvaizdą. Išbandykite!" #: resources/data/hints.ini: [hint:Fine-tuning for flow rate] msgid "" "Fine-tuning for flow rate\n" "Did you know that flow rate can be fine-tuned for even better-looking prints? Depending on the material, you can improve the overall finish of the printed model by doing some fine-tuning." msgstr "" "Tikslus srauto reguliavimas\n" "Ar žinojote, kad srauto greitį (flow rate) galima sureguliuoti tiksliau, kad spaudiniai atrodytų dar geriau? Priklausomai nuo medžiagos, atlikę tikslų sureguliavimą galite pagerinti bendrą atspausdinto modelio paviršiaus kokybę." #: resources/data/hints.ini: [hint:Split your prints into plates] msgid "" "Split your prints into plates\n" "Did you know that you can split a model that has a lot of parts into individual plates ready to print? This will simplify the process of keeping track of all the parts." msgstr "" "Suskirstykite spaudinius į pagrindus\n" "Ar žinojote, kad daug dalių turintį modelį galite padalyti į atskirus, spausdinimui paruoštus pagrindus? Tai supaprastins visų dalių sekimo procesą." #: resources/data/hints.ini: [hint:Speed up your print with Adaptive Layer #: Height] msgid "" "Speed up your print with Adaptive Layer Height\n" "Did you know that you can print a model even faster by using the Adaptive Layer Height option? Check it out!" msgstr "" "Paspartinkite spausdinimą naudodami prisitaikantį sluoksnio aukštį\n" "Ar žinojote, kad naudodami prisitaikančio sluoksnio aukščio (Adaptive Layer Height) parinktį modelį galite atspausdinti dar greičiau? Išbandykite!" #: resources/data/hints.ini: [hint:Support painting] msgid "" "Support painting\n" "Did you know that you can paint the location of your supports? This feature makes it easy to place the support material only on the sections of the model that actually need it." msgstr "" "Atramų piešimas\n" "Ar žinojote, kad galite užpiešti vietas, kur reikalingos atramos? Ši funkcija leidžia lengvai pritaikyti atraminę medžiagą tik tose modelio dalyse, kurioms jos iš tikrųjų reikia." #: resources/data/hints.ini: [hint:Different types of supports] msgid "" "Different types of supports\n" "Did you know that you can choose from multiple types of supports? Tree supports work great for organic models while saving filament and improving print speed. Check them out!" msgstr "" "Įvairių tipų atramos\n" "Ar žinojote, kad galite rinktis iš kelių tipų atramų? Medžio formos atramos puikiai tinka organiškiems modeliams, kartu taupydamos giją ir padidindamos spausdinimo greitį. Išbandykite jas!" #: resources/data/hints.ini: [hint:Printing Silk Filament] msgid "" "Printing Silk Filament\n" "Did you know that Silk filament needs special consideration to print successfully? A higher temperature and lower speed are always recommended for the best results." msgstr "" "Šilko (Silk) gijos spausdinimas\n" "Ar žinojote, kad norint sėkmingai atspausdinti šilko giją, reikalingi specialūs nustatymai? Siekiant geriausių rezultatų, visada rekomenduojama aukštesnė temperatūra ir mažesnis greitis." #: resources/data/hints.ini: [hint:Brim for better adhesion] msgid "" "Brim for better adhesion\n" "Did you know that when printed models have a small contact interface with the printing surface, it's recommended to use a brim?" msgstr "" "Kraštas geresniam sukibimui\n" "Ar žinojote, kad kai spausdinami modeliai turi nedidelį sąlyčio plotą su spausdinimo paviršiumi, rekomenduojama naudoti kraštą (brim)?" #: resources/data/hints.ini: [hint:Set parameters for multiple objects] msgid "" "Set parameters for multiple objects\n" "Did you know that you can set slicing parameters for all selected objects at once?" msgstr "" "Parametrų nustatymas keliems objektams\n" "Ar žinojote, kad pjaustymo parametrus galite nustatyti visiems pasirinktiems objektams iš karto?" #: resources/data/hints.ini: [hint:Stack objects] msgid "" "Stack objects\n" "Did you know that you can stack objects as a whole one?" msgstr "" "Objektų krovimas vienas ant kito\n" "Ar žinojote, kad galite krauti objektus vieną ant kito, sujungdami juos į vieną visumą?" #: resources/data/hints.ini: [hint:Flush into support/objects/infill] msgid "" "Flush into support/objects/infill\n" "Did you know that you can reduce wasted filament by flushing it into support/objects/infill during filament changes?" msgstr "" "Išspausti į atramą/objektus/užpildą \n" "Ar žinojote, kad galite sutaupyti eikvojamą giją, išspaudžiant ją į atramą/objektus/užpildą keičiant giją?" #: resources/data/hints.ini: [hint:Improve strength] msgid "" "Improve strength\n" "Did you know that you can use more wall loops and higher sparse infill density to improve the strength of the model?" msgstr "" "Tvirtumo didinimas\n" "Ar žinojote, kad modelio tvirtumui padidinti galite naudoti daugiau sienelės kontūrų ir didesnį reto užpildo tankį?" #: resources/data/hints.ini: [hint:When do you need to print with the printer #: door opened] msgid "" "When do you need to print with the printer door opened?\n" "Did you know that opening the printer door can reduce the probability of extruder/hotend clogging when printing lower temperature filament with a higher enclosure temperature? There is more info about this in the Wiki." msgstr "" "Kada reikia spausdinti atidarius spausdintuvo dureles?\n" "Ar žinojote, kad atidarius spausdintuvo dureles gali sumažėti ekstruderio / karštosios galvutės (hotend) užsikimšimo tikimybė, kai žemos lydymosi temperatūros gija spausdinama esant aukštai kameros temperatūrai? Daugiau informacijos apie tai rasite „Wiki“ puslapyje." #: resources/data/hints.ini: [hint:Avoid warping] msgid "" "Avoid warping\n" "Did you know that when printing materials that are prone to warping such as ABS, appropriately increasing the heatbed temperature can reduce the probability of warping?" msgstr "" "Venkite deformacijų (warping)\n" "Ar žinojote, kad spausdinant medžiagas, kurios yra linkusios trauktis ir riestis (pvz., ABS), tinkamas kaitinamojo pagrindo temperatūros padidinimas gali sumažinti deformacijų (warping) tikimybę?" #~ msgid "Print order within a single layer." #~ msgstr "Elementų spausdinimo eiliškumas vieno sluoksnio ribose." #~ msgid "Bottom" #~ msgstr "Apačia" #~ msgid "Front" #~ msgstr "Priekis" #~ msgid "Rear" #~ msgstr "Galas" #~ msgid "Enter" #~ msgstr "Įvesti" #~ msgid "Esc" #~ msgstr "Esc" #~ msgid "Del" #~ msgstr "Del" #~ msgid "Backspace" #~ msgstr "Backspace" #~ msgid "Arrow Up" #~ msgstr "Rodyklė aukštyn" #~ msgid "Arrow Down" #~ msgstr "Rodyklė žemyn" #~ msgid "Arrow Left" #~ msgstr "Rodyklė Kairėn" #~ msgid "Arrow Right" #~ msgstr "Rodyklė dešinėn" #~ msgid "End" #~ msgstr "Pabaiga" #~ msgid "Hotend" #~ msgstr "Kaitinimo blokas (Hotend)" #~ msgid "Skip for Now" #~ msgstr "Kol kas praleisti" #~ msgid "Remind Later" #~ msgstr "Priminti vėliau" #~ msgid "Skip Version" #~ msgstr "Praleisti šią versiją" #~ msgid "Restart Later" #~ msgstr "Paleisti iš naujo vėliau" #~ msgid "Select filament that installed to the left nozzle" #~ msgstr "Pasirinkite giją, įstatytą į kairįjį purkštuką" #~ msgid "Select filament that installed to the right nozzle" #~ msgstr "Pasirinkite giją, įstatytą į dešinįjį purkštuką" #, c-format, boost-format #~ msgid "Note: the filament type(%s) does not match with the filament type(%s) in the slicing file. If you want to use this slot, you can install %s instead of %s and change slot information on the 'Device' page." #~ msgstr "Pastaba: gijos tipas (%s) nesutampa su gijos tipu (%s) paruoštame spausdinimo faile. Jei norite naudoti šią angą, vietoj %s galite įstatyti %s ir pakeisti angos informaciją puslapyje „Įrenginys“." #, c-format, boost-format #~ msgid "Note: the slot is empty or undefined. If you want to use this slot, you can install %s and change slot information on the 'Device' page." #~ msgstr "Pastaba: anga yra tuščia arba neapibrėžta. Jei norite naudoti šią angą, galite įstatyti %s ir pakeisti angos informaciją puslapyje „Įrenginys“." #~ msgid "Note: Only filament-loaded slots can be selected." #~ msgstr "Pastaba: galima pasirinkti tik tas angas, į kurias yra įkelta gija." #~ msgid "Save the printing files initiated from Bambu Studio, Bambu Handy and MakerWorld on External Storage" #~ msgstr "Išsaugoti išorinėje laikmenoje spausdinimo failus, paleistus iš „Bambu Studio“, „Bambu Handy“ ir „MakerWorld“" #~ msgid "The current firmware supports a maximum of 16 materials. You can either reduce the number of materials to 16 or fewer on the Preparation Page, or try updating the firmware. If you are still restricted after the update, please wait for subsequent firmware support." #~ msgstr "Dabartinė programinė įranga palaiko ne daugiau kaip 16 medžiagų. Galite paruošimo puslapyje sumažinti medžiagų skaičių iki 16 ar mažiau arba pabandyti atnaujinti programinę įrangą. Jei po atnaujinimo apribojimas išlieka, palaukite vėlesnių programinės įrangos atnaujinimų." #~ msgid "Click OK to update the Network plug-in the next time Orca Slicer launches." #~ msgstr "Spustelėkite Gerai, kad kitą kartą paleidus \"Orca-Flashforge\" būtų atnaujintas tinklo papildinys." #, boost-format #~ msgid "Failed to calculate line width of %1%. Cannot get value of “%2%”." #~ msgstr "Nepavyko apskaičiuoti %1% linijos pločio. Nepavyksta gauti „%2%“ reikšmės." #~ msgid "Invalid spacing supplied to Flow::with_spacing(), check your layer height and extrusion width." #~ msgstr "Srautui Flow::with_spacing() pateiktas neteisingas tarpas, patikrinkite sluoksnio aukštį ir išspaudimo plotį" #~ msgid "°C" #~ msgstr "°C" #~ msgid "Renders cast shadows on the plate in realistic view." #~ msgstr "Realistiniame vaizde atvaizduoja krentančius šešėlius ant spausdinimo pagrindo." #~ msgid "" #~ "Applies smooth normals to the realistic view.\n" #~ "\n" #~ "Requires manual scene reload to take effect (right-click on 3D view → \"Reload All\")." #~ msgstr "" #~ "Realistiškam vaizdui pritaiko glotnias normales.\n" #~ "\n" #~ "Kad pakeitimai įsigaliotų, reikia rankiniu būdu perkrauti sceną (dešiniuoju pelės mygtuku spustelėkite 3D vaizdą → „Perkrauti viską“)." #~ msgid "Continue to sync filaments" #~ msgstr "Tęsti gijų sinchronizavimą" #~ msgctxt "Sync_Nozzle_AMS" #~ msgid "Cancel" #~ msgstr "Atšaukti" #, no-c-format, no-boost-format #~ msgid "" #~ "External Bridging angle override.\n" #~ "If left to zero, the bridging angle will be calculated automatically for each specific bridge.\n" #~ "Otherwise the provided angle will be used according to:\n" #~ " - The absolute coordinates\n" #~ " - The absolute coordinates + Model rotation: If Align infill direction to model is enabled\n" #~ " - The optimal automatic angle + this value: If 'Relative Bridge Angle' is enabled\n" #~ "\n" #~ "Use 180° for zero absolute angle." #~ msgstr "" #~ "Išorinių tiltelių kampo perrašymas.\n" #~ "Palikus 0, tiltelio kampas bus apskaičiuojamas automatiškai kiekvienam konkrečiam tilteliui.\n" #~ "Kitu atveju nurodytas kampas bus naudojamas pagal:\n" #~ " - absoliučiąsias koordinates;\n" #~ " - absoliučiąsias koordinates + modelio pasukimą: jei įjungta „Sulygiuoti užpildo kryptį su modeliu“;\n" #~ " - optimalų automatinį kampą + šią reikšmę: jei įjungta „Santykinis tiltelio kampas“.\n" #~ "\n" #~ "Naudokite 180° nulinėms absoliučiosioms koordinatėms." #~ msgid "" #~ "Internal Bridging angle override.\n" #~ "If left to zero, the bridging angle will be calculated automatically for each specific bridge.\n" #~ "Otherwise the provided angle will be used according to:\n" #~ " - The absolute coordinates\n" #~ " - The absolute coordinates + Model rotation: If Align infill direction to model is enabled\n" #~ " - The optimal automatic angle + this value: If 'Relative Bridge Angle' is enabled\n" #~ "\n" #~ "Use 180° for zero absolute angle." #~ msgstr "" #~ "Vidinių tiltelių kampo perrašymas.\n" #~ "Palikus 0, tiltelio kampas bus apskaičiuojamas automatiškai kiekvienam konkrečiam tilteliui.\n" #~ "Kitu atveju nurodytas kampas bus naudojamas pagal:\n" #~ " - absoliučiąsias koordinates;\n" #~ " - absoliučiąsias koordinates + modelio pasukimą: jei įjungta „Sulygiuoti užpildo kryptį su modeliu“;\n" #~ " - optimalų automatinį kampą + šią reikšmę: jei įjungta „Santykinis tiltelio kampas“.\n" #~ "\n" #~ "Naudokite 180° nulinėms absoliučiosioms koordinatėms." #~ msgid "Align infill direction to model" #~ msgstr "Suderinti užpildo kryptį su modeliu" #~ msgid "" #~ "Aligns infill, bridge, ironing and surface fill directions to follow the model's orientation on the build plate.\n" #~ "When enabled, directions rotate with the model to maintain optimal strength characteristics." #~ msgstr "" #~ "Sulygiuoja užpildo, tiltelių, lyginimo ir paviršiaus užpildymo kryptis pagal modelio orientaciją ant pagrindo.\n" #~ "Kai įjungta, kryptys sukasi kartu su modeliu, kad būtų išlaikytos optimalios tvirtumo charakteristikos." #~ msgid "Print" #~ msgstr "Spausdinti" #~ msgid "in" #~ msgstr "col." #~ msgid "Perform" #~ msgstr "Atlikti" #~ msgid "Highlight overhang areas" #~ msgstr "Paryškinti kabančias vietas" #~ msgid "Support Generated" #~ msgstr "Atramos sugeneruotos" #~ msgid "Lay on face" #~ msgstr "Paguldyti ant paviršiaus" #~ msgid "Object Operations" #~ msgstr "Objekto veiksmai" #~ msgid "Volume Operations" #~ msgstr "Tūrio veiksmai" #~ msgid "Group Operations" #~ msgstr "Grupės veiksmai" #~ msgid "Set Orientation" #~ msgstr "Nustatyti orientaciją" #~ msgid "Set Scale" #~ msgstr "Nustatyti mastelį" #~ msgid "Reset Position" #~ msgstr "Atstatyti padėtį" #~ msgid "Reset Rotation" #~ msgstr "Iš naujo nustatyti pasukimą" #~ msgid "Object coordinates" #~ msgstr "Objekto koordinatės" #~ msgid "World coordinates" #~ msgstr "Pasaulio koordinatės" #~ msgid "Translate(Relative)" #~ msgstr "Slinkti (santykinai)" #~ msgid "Rotate (absolute)" #~ msgstr "Pasukti (absoliučiai)" #~ msgid "Part coordinates" #~ msgstr "Detalės koordinatės" #~ msgid "Non-manifold edges be caused by cut tool, do you want to fix it now?" #~ msgstr "Pjovimo įrankis suformavo nesandarias (non-manifold) briaunas. Ar norite jas sutvarkyti dabar?" #~ msgid "Can't apply when processing preview." #~ msgstr "Negalima taikyti atliekant sluoksniavimo (preview) apdorojimą." #~ msgid "Entering Seam painting" #~ msgstr "Įjungiamas siūlių piešimas" #~ msgid "" #~ "Embedded\n" #~ "depth" #~ msgstr "" #~ "Įspaudimo\n" #~ "gylis" #~ msgid "Configuration package was loaded, but some values were not recognized." #~ msgstr "Konfigūracijos paketas buvo įkeltas, tačiau kai kurios reikšmės nebuvo atpažintos." #, boost-format #~ msgid "Configuration file \"%1%\" was loaded, but some values were not recognized." #~ msgstr "Konfigūracijos failas „%1%“ buvo įkeltas, tačiau kai kurios reikšmės nebuvo atpažintos." #~ msgid "You can keep the modified presets to the new project, discard or save changes as new presets." #~ msgstr "Modifikuotus profilius galite išlaikyti naujame projekte, atmesti pakeitimus arba išsaugoti juos kaip naujus profilius." #~ msgid "" #~ "Cloud sync conflict: this preset has a newer version in OrcaCloud.\n" #~ "Pull downloads the cloud copy. Force push overwrites it with your local preset." #~ msgstr "" #~ "Debesų sinchronizavimo konfliktas: „OrcaCloud“ yra naujesnė šio profilio versija.\n" #~ "Pasirinkus „Pull“ („Parsiųsti\") bus atsisiųsta kopija iš debesies. Pasirinkus \n" #~ "„Force push“ („Priverstinai įkelti“) debesyje jis bus perrašytas jūsų vietiniu profiliu." #~ msgid "" #~ "Cloud sync conflict: a preset with this name already exists in OrcaCloud.\n" #~ "Pull downloads the cloud copy. Force push overwrites it with your local preset." #~ msgstr "" #~ "Debesų sinchronizavimo konfliktas: „OrcaCloud“ jau yra šio profilio su šiuo pavadinimu.\n" #~ "Pasirinkus „Pull“ („Parsiųsti\") bus atsisiųsta kopija iš debesies. Pasirinkus \n" #~ "„Force push“ („Priverstinai įkelti“) debesyje jis bus perrašytas jūsų vietiniu profiliu." #~ msgid "" #~ "Cloud sync conflict: a preset with the same name was previously deleted from the cloud.\n" #~ "Delete will delete your local preset. Force push overwrites it with your local preset." #~ msgstr "" #~ "Debesų sinchronizavimo konfliktas: anksčiau iš debesies buvo ištrintas to paties pavadinimo profilis.\n" #~ "Pasirinkus „Ištrinti“ bus ištrintas jūsų vietinis profilis. Pasirinkus „Priverstinai įkelti“ \n" #~ "debesyje jis bus perrašytas jūsų vietiniu profiliu." #~ msgid "" #~ "Cloud sync conflict: there was an unexpected or unidentified preset conflict.\n" #~ "Pull downloads the cloud copy. Force push overwrites it with your local preset." #~ msgstr "" #~ "Debesų sinchronizavimo konfliktas: įvyko netikėtas arba nenustatytas nustatymų konfliktas.\n" #~ "Pasirinkus „Pull“ („Parsiųsti\") bus atsisiųsta kopija iš debesies. Pasirinkus \n" #~ "„Force push“ („Priverstinai įkelti“) debesyje jis bus perrašytas jūsų vietiniu profiliu." #~ msgid "The preset content is too large to sync to the cloud (exceeds 1MB). Please reduce the preset size by removing custom configurations or use it locally only." #~ msgstr "Profilio turinys yra per didelis, kad būtų galima sinchronizuoti su debesimi (viršija 1 MB). Prašome sumažinti profilio dydį, pašalinant pasirinktinius nustatymus, arba jį naudoti tik lokaliai." #, boost-format #~ msgid "Fatal error, exception caught: %1%" #~ msgstr "Lemtingoji klaida, sugauta išimtis: %1%" #~ msgid "Top Solid Layers" #~ msgstr "Viršutiniai ištisiniai sluoksniai" #~ msgid "Top Minimum Shell Thickness" #~ msgstr "Mažiausias viršutinio apvalkalo storis" #~ msgid "Bottom Solid Layers" #~ msgstr "Apatiniai ištisiniai sluoksniai" #~ msgid "Bottom Minimum Shell Thickness" #~ msgstr "Mažiausias apatinio apvalkalo storis" #~ msgid "Fuzzy Skin" #~ msgstr "Grublėtas paviršius" #~ msgid "Extrusion Width" #~ msgstr "Išspaudimo plotis" #~ msgid "Add part" #~ msgstr "Pridėti detalę" #~ msgid "Add negative part" #~ msgstr "Pridėti neigiamą elementą" #~ msgid "Add modifier" #~ msgstr "Pridėti modifikatorių" #~ msgid "Add support blocker" #~ msgstr "Pridėti atramų blokatorių" #~ msgid "Add support enforcer" #~ msgstr "Pridėti priverstines atramas" #~ msgid "Height range Modifier" #~ msgstr "Aukščio diapazono modifikatorius" #~ msgid "Add settings" #~ msgstr "Pridėti nustatymus" #~ msgid "Change type" #~ msgstr "Keisti tipą" #~ msgid "Set as an individual object" #~ msgstr "Nustatyti kaip atskirą objektą" #~ msgid "Set as individual objects" #~ msgstr "Nustatyti kaip atskirus objektus" #~ msgid "Automatically drops the selected object to the build plate" #~ msgstr "Automatiškai nuleidžia pasirinktą objektą ant spausdinimo plokštės" #~ msgid "Fix model" #~ msgstr "Sutaisyti objektą" #~ msgid "Convert from inches" #~ msgstr "Konvertuoti iš colių" #~ msgid "Restore to inches" #~ msgstr "Grąžinti į colius" #~ msgid "Convert from meters" #~ msgstr "Konvertuoti iš metrų" #~ msgid "Restore to meters" #~ msgstr "Grąžinti į metrus" #~ msgid "Along X axis" #~ msgstr "Išilgai X ašies" #~ msgid "Mirror along the X axis" #~ msgstr "Atspindėti pagal X ašį" #~ msgid "Along Y axis" #~ msgstr "Išilgai Y ašies" #~ msgid "Mirror along the Y axis" #~ msgstr "Atspindėti pagal Y ašį" #~ msgid "Along Z axis" #~ msgstr "Išilgai Z ašies" #~ msgid "Mirror along the Z axis" #~ msgstr "Atspindėti pagal Z ašį" #~ msgid "To objects" #~ msgstr "Į objektus" #~ msgid "To parts" #~ msgstr "Paversti detalėmis" #~ msgid "Automatically snaps the selected object to the build plate" #~ msgstr "Automatiškai pritraukia pasirinktą objektą prie spausdinimo plokštės" #~ msgid "Right button click the icon to drop the object settings" #~ msgstr "Spustelėkite piktogramą dešiniuoju pelės mygtuku, kad atmestumėte objekto nustatymus" #~ msgid "Right button click the icon to drop the object printable property" #~ msgstr "Spustelėkite piktogramą dešiniuoju pelės mygtuku, kad panaikintumėte objekto spausdinimo savybę" #~ msgid "Click the icon to toggle printable property of the object" #~ msgstr "Spustelėkite piktogramą, kad įjungtumėte / išjungtumėte objekto spausdinimo galimybę" #~ msgid "Click the icon to edit color painting of the object" #~ msgstr "Spustelėkite piktogramą, kad redaguotumėte objekto spalvinimą" #~ msgid "" #~ "This action will break a cut correspondence.\n" #~ "After that model consistency can't be guaranteed.\n" #~ "\n" #~ "To manipulate with solid parts or negative volumes you have to invalidate cut information first." #~ msgstr "" #~ "Šis veiksmas nutrauks pjūvių susietumą.\n" #~ "Po to modelio vientisumas negali būti garantuotas.\n" #~ "\n" #~ "Norėdami manipuliuoti geometrinėmis detalėmis arba neigiamais tūriais, pirmiausia turite panaikinti pjovimo informacijos galiojimą." #~ msgid "Object Settings to modify" #~ msgstr "Keičiami objekto parametrai" #~ msgid "Part Settings to modify" #~ msgstr "Keičiami detalės parametrai" #~ msgid "Layer range Settings to modify" #~ msgstr "Keičiami sluoksnių ribų nustatymai" #~ msgid "The type of the last solid object part is not to be changed." #~ msgstr "Paskutinės vientisos objekto detalės tipo keisti negalima." #~ msgid "Following model object has been repaired" #~ msgid_plural "Following model objects have been repaired" #~ msgstr[0] "Sutaisytas šis modelio objektas" #~ msgstr[1] "Sutaisyti šie modelio objektai" #~ msgstr[2] "Sutaisyta šio modelio objektų" #~ msgid "Failed to repair following model object" #~ msgid_plural "Failed to repair following model objects" #~ msgstr[0] "Nepavyko sutaisyti šio modelio objekto" #~ msgstr[1] "Nepavyko sutaisyti šio modelio objektų" #~ msgstr[2] "Nepavyko sutaisyti šio modelio objektų" #~ msgid "Open Preferences." #~ msgstr "Atidaryti nuostatas." #~ msgid "Open next tip." #~ msgstr "Kitas patarimas." #~ msgid "Open Documentation in web browser." #~ msgstr "Atidaryti dokumentaciją žiniatinklio naršyklėje." #~ msgid "Jump to Layer" #~ msgstr "Peršokti į sluoksnį" #~ msgid "Please enter the layer number" #~ msgstr "Įveskite sluoksnio numerį" #~ msgid "Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically load or unload filaments." #~ msgstr "Pasirinkite AMS angą, tada paspauskite „Įkelti“ arba „Iškrauti“ mygtuką, kad automatiškai įkeltumėte arba iškrautumėte gijas." #~ msgid "Pull back current filament" #~ msgstr "Patraukti atgal dabartinę giją" #~ msgid "Arranging is done but there are unpacked items. Reduce spacing and try again." #~ msgstr "Išdėstymas baigtas, tačiau liko nesublokuotų elementų (unpacked). Sumažinkite tarpus ir bandykite dar kartą." #~ msgid "Abnormal print file data. Please slice again." #~ msgstr "Klaidingi spausdinimo failo duomenys. Paruoškite spausdinimui (slice) iš naujo." #~ msgid "Print file not found. Please slice again." #~ msgstr "Spausdinimo failas nerastas. Paruoškite spausdinimui (slice) iš naujo." #~ msgid "Check the current status of the bambu server by clicking on the link above." #~ msgstr "Paspaudę nuorodą viršuje, galite patikrinti aktualią Bambu serverio būseną." #~ msgid "Print file not found, please slice it again and send it for printing." #~ msgstr "Nerastas spausdinimo failas. Prašome dar kartą išsluoksniuoti ir išsiųsti spausdinimui." #~ msgid "Failed to upload print file to FTP. Please check the network status and try again." #~ msgstr "Nepavyko spausdinimo failo įkelti į FTP serverį. Patikrinkite tinklo būseną ir bandykite dar kartą." #~ msgid "The SLA archive doesn't contain any presets. Please activate some SLA printer preset first before importing that SLA archive." #~ msgstr "SLA archyve nėra jokių profilių. Prieš importuodami šį SLA archyvą, pirmiausia aktyvinkite kurį nors SLA spausdintuvo profilį. / Importuotame SLA archyve nebuvo jokių profilių. Kaip atsarginiai buvo panaudoti dabartiniai SLA profiliai." #~ msgid "You cannot load SLA project with a multi-part object on the bed" #~ msgstr "Negalite įkelti SLA projekto, kai ant pagrindo yra kelių detalių objektas." #~ msgid "Portions copyright" #~ msgstr "Dalys saugomos autorių teisių" #~ msgid "Bed Type" #~ msgstr "Pagrindo tipas" #~ msgid "Start calibration" #~ msgstr "Pradėti kalibravimą" #~ msgid "Last Step" #~ msgstr "Atgal" #~ msgid "Dynamic flow Calibration" #~ msgstr "Dinaminio srauto kalibravimas" #~ msgid "Print with filaments in the AMS" #~ msgstr "Spausdinti su gijomis iš AMS" #~ msgid "Print with the filament mounted on the back of chassis" #~ msgstr "Spausdinti naudojant giją, sumontuotą korpuso galinėje dalyje" #~ msgid "Please change the desiccant when it is too wet. The indicator may not represent accurately in following cases: when the lid is open or the desiccant pack is changed. It take hours to absorb the moisture, and low temperatures also slow down the process." #~ msgstr "Pakeiskite drėgmės sugėriklį (sausiklį), kai jis per daug sudrėgsta. Indikatoriaus rodmenys gali būti netikslūs šiais atvejais: kai atidarytas dangtis arba pakeistas drėgmės sugėriklio paketas. Drėgmei sugerti reikia kelių valandų, o žema temperatūra šį procesą dar labiau sulėtina." #~ msgid "Print using materials mounted on the back of the case" #~ msgstr "Spausdinti naudojant medžiagas, sumontuotas korpuso galinėje dalyje" #~ msgid "Print with filaments in AMS" #~ msgstr "Spausdinti AMS gijomis" #~ msgid "Print with filaments mounted on the back of the chassis" #~ msgstr "Spausdinti naudojant gijas, sumontuotas korpuso galinėje dalyje" #~ msgid "AMS filament backup is not enabled, please enable it in the AMS settings." #~ msgstr "AMS atsarginė gija neįjungta, įjunkite ją AMS nustatymuose." #~ msgid "The AMS will automatically read the filament information when inserting a new Bambu Lab filament. This takes about 20 seconds." #~ msgstr "Įdėjus naują Bambu Lab giją, AMS automatiškai nuskaitys jos informaciją. Tai trunka apie 20 sekundžių." #~ msgid "Power on update" #~ msgstr "Atnaujinimas įjungiant maitinimą" #~ msgid "The AMS will automatically read the information of inserted filament on start-up. It will take about 1 minute. The reading process will roll the filament spools." #~ msgstr "Paleidimo metu AMS automatiškai nuskaitys įdėtos gijos informaciją. Tai užtruks apie 1 minutę. Nuskaitymo proceso metu bus pasukamos gijos ritės." #~ msgid "Failed to install the plug-in. The plug-in file may be in use. Please restart OrcaSlicer and try again. Also check whether it is blocked or deleted by anti-virus software." #~ msgstr "Nepavyko įdiegti papildinio. Papildinio failas gali būti naudojamas. Paleiskite „OrcaSlicer“ iš naujo ir bandykite dar kartą. Taip pat patikrinkite, ar jo neužblokavo arba neištrynė antivirusinė programa." #~ msgid "A error occurred. Maybe memory of system is not enough or it's a bug of the program" #~ msgstr "Įvyko klaida. Sistemoje galėjo pritrūkti atminties arba įvyko programos klaida" #~ msgid "Please save project and restart the program." #~ msgstr "Išsaugokite projektą ir iš naujo paleiskite programą." #~ msgid "Processing G-code from Previous file..." #~ msgstr "Vykdomas G-kodas iš prieš tai buvusio failo..." #~ msgid "Unknown error when exporting G-code." #~ msgstr "Nežinoma G kodo eksporto klaida." #~ msgid "Copying of the temporary G-code to the output G-code failed" #~ msgstr "Nepavyko nukopijuoti laikinojo G-kodo į išvesties G-kodą" #~ msgid "Error! Invalid model" #~ msgstr "Klaida! Netinkamas modelis" #~ msgid "The selected file contains several disjoint areas. This is not supported." #~ msgstr "Pasirinktame faile yra keletas nesusijusių sričių. Tai nepalaikoma." #~ msgid "" #~ "Nozzle may be blocked when the temperature is out of recommended range.\n" #~ "Please make sure whether to use the temperature to print.\n" #~ "\n" #~ msgstr "" #~ "Jei temperatūra viršija rekomenduojamas ribas, purkštukas (nozzle) gali užsikimšti.\n" #~ "Įsitikinkite, ar tikrai norite spausdinti pasirinkta temperatūra.\n" #~ "\n" #~ msgid "" #~ "Too small max volumetric speed.\n" #~ "Reset to 0.5." #~ msgstr "" #~ "Per mažas maksimalus tūrinis greitis.\n" #~ "Nustatoma iš naujo į 0,5." #, c-format, boost-format #~ msgid "Current chamber temperature is higher than the material's safe temperature, this may result in material softening and clogging. The maximum safe temperature for the material is %d" #~ msgstr "Dabartinė kameros temperatūra yra aukštesnė už saugią medžiagos temperatūrą, dėl to medžiaga gali suminkštėti ir užkimšti purkštuką. Maksimali saugi medžiagos temperatūra yra %d." #~ msgid "" #~ "Too small layer height.\n" #~ "Reset to 0.2." #~ msgstr "" #~ "Per mažas sluoksnio aukštis.\n" #~ "Nustatoma iš naujo į 0,2." #~ msgid "" #~ "Too small ironing spacing.\n" #~ "Reset to 0.1." #~ msgstr "" #~ "Per mažas lyginimo tarpas.\n" #~ "Nustatoma iš naujo į 0,1." #~ msgid "" #~ "This setting is only used for model size tunning with small value in some cases.\n" #~ "For example, when model size has small error and hard to be assembled.\n" #~ "For large size tuning, please use model scale function.\n" #~ "\n" #~ "The value will be reset to 0." #~ msgstr "" #~ "Šis parametras kai kuriais atvejais naudojamas tik nedideliam modelio matmenų tikslinimui (tuning).\n" #~ "Pavyzdžiui, kai modelio dydis turi nedidelę paklaidą ir jį sunku surinkti.\n" #~ "Didelio dydžio koregavimui naudokite modelio mastelio keitimo funkciją.\n" #~ "\n" #~ "Reikšmė bus nustatyta iš naujo į 0." #~ msgid "" #~ "Too large elephant foot compensation is unreasonable.\n" #~ "If really have serious elephant foot effect, please check other settings.\n" #~ "For example, whether bed temperature is too high.\n" #~ "\n" #~ "The value will be reset to 0." #~ msgstr "" #~ "Per didelė „dramblio pėdos“ (Elephant foot) kompensacija yra nepagrįsta.\n" #~ "Jei tikrai susiduriate su stipriu „dramblio pėdos“ efektu, patikrinkite kitus parametrus.\n" #~ "Pavyzdžiui, ar pagrindo temperatūra nėra per aukšta.\n" #~ "\n" #~ "Nustatoma iš naujo į 0." #~ msgid "" #~ "Change these settings automatically?\n" #~ "Yes - Change these settings and enable spiral mode automatically\n" #~ "No - Give up using spiral mode this time" #~ msgstr "" #~ "Automatiškai pakeisti šiuos nustatymus?\n" #~ "Taip – pakeisti šiuos nustatymus ir automatiškai įjungti spiralinį režimą\n" #~ "Ne – šį kartą nenaudoti spiralinio režimo" #~ msgid "Load Filament" #~ msgstr "Įverti giją" #, c-format, boost-format #~ msgid "%s can't be a percentage" #~ msgstr "%s negali būti išreikštas procentais" #~ msgid "Total Estimation" #~ msgstr "Bendras įvertis (skaičiavimas)" #~ msgid "Layer Height (mm)" #~ msgstr "Sluoksnio aukštis (mm)" #~ msgid "Line Width (mm)" #~ msgstr "Linijos plotis (mm)" #~ msgid "Fan Speed (%)" #~ msgstr "Ventiliatoriaus greitis (%)" #~ msgid "Filament Changes" #~ msgstr "Gijų keitimai" #~ msgid "Mirror Object" #~ msgstr "Atspindėti objektą" #~ msgid "Tool Move" #~ msgstr "Įrankis: perkėlimas" #~ msgid "Move Object" #~ msgstr "Perkelti objektą" #~ msgid "Auto Orientation options" #~ msgstr "Automatinio orientavimo parametrai" #~ msgid "Assemble Control" #~ msgstr "Surinkimo valdymas" #~ msgid "A G-code path goes beyond the plate boundaries." #~ msgstr "G-kodo trajektorija išeina už plokštės ribų." #~ msgid "Invalid input." #~ msgstr "Netinkama įvestis." #~ msgid "Application is closing" #~ msgstr "Programa uždaroma" #~ msgid "Delete all" #~ msgstr "Ištrinti viską" #~ msgid "Clone selected" #~ msgstr "Klonuoti pasirinktą" #~ msgid "Select all" #~ msgstr "Pasirinkti viską" #~ msgid "Deselect all" #~ msgstr "Panaikinti visų objektų pasirinkimą" #, c-format, boost-format #~ msgid "A file exists with the same name: %s, do you want to overwrite it?" #~ msgstr "Failas tokiu pavadinimu jau egzistuoja: %s. Ar norite jį pakeisti?" #, c-format, boost-format #~ msgid "A config exists with the same name: %s, do you want to overwrite it?" #~ msgstr "Konfigūracija tokiu pavadinimu jau egzistuoja: %s. Ar norite ją pakeisti?" #~ msgid "Export result" #~ msgstr "Eksportavimo rezultatas" #~ msgid "Filament Settings" #~ msgstr "Gijos nustatymai" #~ msgid "The player is not loaded, please click \"play\" button to retry." #~ msgstr "Grotuvas neįkeltas. Norėdami pakartoti, spustelėkite paleidimo mygtuką „Play“." #~ msgid "Please enter the IP of printer to connect." #~ msgstr "Įveskite spausdintuvo IP adresą, kad prisijungtumėte." #~ msgid "Can't find my devices?" #~ msgstr "Nepavyksta rasti įrenginių?" #~ msgid "The name is not allowed to be empty." #~ msgstr "Pavadinimas negali būti tuščias." #~ msgid "The name is not allowed to start with space character." #~ msgstr "Pavadinimas negali prasidėti tarpu." #~ msgid "The name is not allowed to end with space character." #~ msgstr "Pavadinimas negali baigtis tarpu." #~ msgid "Printing Progress" #~ msgstr "Spausdinimo eiga" #~ msgid "" #~ "You have completed printing the mall model, \n" #~ "but the synchronization of rating information has failed." #~ msgstr "" #~ "Baigėte spausdinti modelį iš galerijos, \n" #~ "tačiau įvertinimo informacijos sinchronizavimas nepavyko." #, c-format, boost-format #~ msgid "In Cloud Slicing Queue, there are %s tasks ahead." #~ msgstr "Debesies sluoksniavimo eilėje priekyje yra %s užduotys (-ių)." #~ msgid "Cannot read filament info: the filament is loaded to the tool head,please unload the filament and try again." #~ msgstr "Nepavyko nuskaityti gijos informacijos: gija yra paduota į spausdinimo galvutę. Išverkite giją ir bandykite dar kartą." #~ msgid "Configuration can update now." #~ msgstr "Dabar galima atnaujinti konfigūraciją." #~ msgid "Detail." #~ msgstr "Išsamiau." #~ msgid "Exporting." #~ msgstr "Eksportuojama." #~ msgid "Software has New version." #~ msgstr "Išleista nauja programos versija." #~ msgid "Goto download page." #~ msgstr "Eiti į atsisiuntimo puslapį." #~ msgid "Support painting" #~ msgstr "Atramų piešimas" #~ msgid "Color painting" #~ msgstr "Spalvų piešimas" #~ msgid "The localization tag of build plate is detected, and printing is paused if the tag is not in predefined range." #~ msgstr "Spausdinimo pagrindo lokalizavimo žymė įjungta. Spausdinimas bus pristabdytas, jei žymė išeis už nustatytų ribų." #~ msgid "Auto-recovery from step loss" #~ msgstr "Atstatymas po žingsnių praleidimo" #~ msgid "Filament Tangle Detect" #~ msgstr "Gijos susipainiojimo aptikimas" #~ msgid "Previous unsaved project detected, do you want to restore it?" #~ msgstr "Aptiktas ankstesnis neišsaugotas projektas. Ar norite jį atkurti?" #~ msgid "The current hot bed temperature is relatively high. The nozzle may be clogged when printing this filament in a closed enclosure. Please open the front door and/or remove the upper glass." #~ msgstr "Kaitinamo pagrindo temperatūra yra gana aukšta. Spausdinant šią giją uždaroje kameroje, purkštukas gali užsikimšti. Prašome atidaryti priekines dureles ir (arba) nuimti viršutinį stiklą." #~ msgid "The nozzle hardness required by the filament is higher than the default nozzle hardness of the printer. Please replace the hardened nozzle or filament, otherwise, the nozzle will be attrited or damaged." #~ msgstr "Gijai reikalingas purkštuko kietumas yra didesnis už numatytąjį spausdintuvo purkštuko kietumą. Pakeiskite purkštuką į grūdintą arba naudokite kitą giją, kitaip purkštukas nusidėvės arba bus sugadintas." #~ msgid "You'd better upgrade your software.\n" #~ msgstr "Geriau jau atnaujinkite savo programinę įrangą\n" #~ msgid "Please correct them in the param tabs" #~ msgstr "Prašome juos ištaisyti parametrų skirtukuose" #~ msgid "Name of components inside STEP file is not UTF8 format!" #~ msgstr "Komponentų pavadinimai STEP faile nėra UTF-8 formato!" #~ msgid "The name may show garbage characters!" #~ msgstr "Pavadinimas gali rodyti neskaitomus simbolius!" #, c-format, boost-format #~ msgid "" #~ "The object from file %s is too small, and maybe in meters or inches.\n" #~ " Do you want to scale to millimeters?" #~ msgstr "" #~ "Objektas iš failo „%s“ yra per mažas ir galimai nurodytas metrais arba coliais.\n" #~ "Ar norite mastelį pakeisti į milimetrus?" #~ msgid "" #~ "This file contains several objects positioned at multiple heights.\n" #~ "Instead of considering them as multiple objects, should \n" #~ "the file be loaded as a single object having multiple parts?" #~ msgstr "" #~ "Šiame faile yra keli objektai, išdėstyti keliuose aukščiuose.\n" #~ "Ar užuot laikius juos atskirais objektais, reikėtų\n" #~ "įkelti failą kaip vieną objektą, turintį kelias dalis?" #~ msgid "Object with multiple parts was detected" #~ msgstr "Aptiktas objektas su keliomis detalėmis" #~ msgid "Save file as:" #~ msgstr "Išsaugoti failą kaip:" #, c-format, boost-format #~ msgid "" #~ "The file %s already exists\n" #~ "Do you want to replace it?" #~ msgstr "" #~ "Failas %s jau yra\n" #~ "Ar norite jį perrašyti?" #~ msgid "" #~ "You try to delete an object which is a part of a cut object.\n" #~ "This action will break a cut correspondence.\n" #~ "After that model consistency can't be guaranteed." #~ msgstr "" #~ "Bandote ištrinti objektą, kuris yra supjaustyto objekto dalis.\n" #~ "Šis veiksmas sugadins pjovimo atitikimą.\n" #~ "Po šio veiksmo modelio vientisumas negali būti garantuotas." #~ msgid "Error during replace" #~ msgstr "Klaida keičiant" #~ msgid "File for the replace wasn't selected" #~ msgstr "Nepasirinktas keičiamas failas" #~ msgid "You can keep the modified presets to the new project or discard them" #~ msgstr "Pakeistus profilius galite išsaugoti naujam projektui arba juos atmesti" #~ msgid "" #~ "Failed to save the project.\n" #~ "Please check whether the folder exists online or if other programs open the project file." #~ msgstr "" #~ "Nepavyko išsaugoti projekto.\n" #~ "Prašome patikrinti, ar nurodytas katalogas egzistuoja tinkle ir ar kitos programos nenaudoja projekto failo." #~ msgid "Download failed, unknown file format." #~ msgstr "Atsisuntimas nepavyko, nežinomas failo tipas." #~ msgid "Download failed, File size exception." #~ msgstr "Atsisiųsti nepavyko. Failo dydžio išimtis." #~ msgid "does not contain valid G-code." #~ msgstr "nėra galiojančio G-kodo." #~ msgid "Error occurs while loading G-code file" #~ msgstr "Įkeliant G-kodo failą įvyko klaida" #~ msgid "Only one G-code file can be opened at the same time." #~ msgstr "Vienu metu gali būti atidarytas tik vienas G-kodo failas." #~ msgid "G-code files cannot be loaded with models together!" #~ msgstr "G-kodas negali būti įkeltas kartu su modeliais!" #~ msgid "Cannot add models when in preview mode!" #~ msgstr "Negalima pridėti modelių peržiūros režime!" #~ msgid "The current project has unsaved changes, save it before continue?" #~ msgstr "Dabartiniame projekte yra neišsaugotų pakeitimų. Ar išsaugoti prieš tęsiant?" #~ msgid "" #~ "Print By Object: \n" #~ "Suggest to use auto-arrange to avoid collisions when printing." #~ msgstr "" #~ "Spausdinimas pagal objektus:\n" #~ "Siekiant spausdinant išvengti susidūrimų, patariama naudoti automatinį išdėstymą." #, c-format, boost-format #~ msgid "Plate %d: %s is not suggested to be used to print filament %s (%s). If you still want to do this print job, please set this filament's bed temperature to non-zero." #~ msgstr "Spausdinimo pagrindas %d: nesiūloma naudoti %s gijai %s (%s) spausdinti. Jei vis tiek norite atlikti šią spausdinimo užduotį, nustatykite šios gijos pagrindo temperatūrą į nenulinę vertę." #~ msgid "Switching the language requires application restart.\n" #~ msgstr "Kalbos keitimas reikalauja programos paleidimo iš naujo.\n" #~ msgid "Changing the region will log out your account.\n" #~ msgstr "Keičiant regioną bus atjungta jūsų paskyra.\n" #~ msgid "Enable dark mode" #~ msgstr "Įjungti tamsųjį režimą" #~ msgid "Backup your project periodically for restoring from the occasional crash." #~ msgstr "Periodiškai saugoti jūsų projekto atsargines kopijas kad programos gedimo atveju jį būtų galima atkurti." #~ msgid "Update built-in Presets automatically." #~ msgstr "Automatiškai atnaujinti gamyklinius (įmontuotus) profilius." #~ msgid "Filament Sync Options" #~ msgstr "Gijų sinchronizavimo parinktys" #~ msgid "Network plug-in" #~ msgstr "Tinklo įskiepis" #~ msgid "Enable network plug-in" #~ msgstr "Įjungti tinklo papildinį" #~ msgid "If enabled, sets OrcaSlicer as default application to open 3MF files." #~ msgstr "Jei įjungta, „OrcaSlicer“ nustatoma kaip numatytoji programa 3MF failams atidaryti." #~ msgid "If enabled, sets OrcaSlicer as default application to open STL files." #~ msgstr "Jei įjungta, „OrcaSlicer“ nustatoma kaip numatytoji programa STL failams atidaryti." #~ msgid "If enabled, sets OrcaSlicer as default application to open STEP files." #~ msgstr "Jei įjungta, „OrcaSlicer“ nustatoma kaip numatytoji programa STEP failams atidaryti." #~ msgid "(Experimental) Keep painted feature after mesh change" #~ msgstr "(Eksperimentinis) Išsaugoti nudažytas ypatybes pakeitus tinklelio modelį" #~ msgid "View control settings" #~ msgstr "Peržiūrėti valdymo nustatymus" #~ msgid "Rotate view" #~ msgstr "Pasukti vaizdą" #~ msgid "Pan view" #~ msgstr "Judinti vaizdą" #~ msgid "Zoom view" #~ msgstr "Padidinti vaizdą" #~ msgid "Mouse wheel reverses when zooming" #~ msgstr "Apversta pelės ratuko didinimo kryptis" #~ msgid "DEBUG settings have been saved successfully!" #~ msgstr "TESTAVIMO nuostatos sėkmingai išsaugotos!" #~ msgid "Cloud environment switched, please login again!" #~ msgstr "Pakeista debesų aplinka, prašome prisijungti iš naujo!" #~ msgid "Add/Remove filaments" #~ msgstr "Pridėti / pašalinti gijas" #~ msgid "Same as Global Bed Type" #~ msgstr "Toks pats, kaip ir bendras pagrindo tipas" #~ msgid "Slice all plate to obtain time and filament estimation" #~ msgstr "Norėdami sužinoti laiko ir gijos sąnaudų įvertinimą, supjaustykite (slice) visus pagrindus" #~ msgid "Please note that saving will overwrite this preset." #~ msgstr "Atkreipkite dėmesį, kad išsaugojus bus perrašytas šis profilis." #~ msgid "When enable spiral vase mode, machines with I3 structure will not generate timelapse videos." #~ msgstr "Įjungus spiralinės vazos režimą, I3 struktūros įrenginiai negeneruos laiko tarpų (timelapse) vaizdo įrašų." #~ msgid "There are some unknown filaments in the AMS mappings. Please check whether they are the required filaments. If they are okay, press \"Confirm\" to start printing." #~ msgstr "AMS sistemoje yra nežinomų gijų. Prašome patikrinti, ar tai yra reikalingos gijos. Jei viskas tvarkoje, spausdinimą galite pradėti paspaudę „Patvirtinti“." #~ msgid "Cannot send the print job to a printer whose firmware is required to get updated." #~ msgstr "Neįmanoma išsiųsti spausdinimo užduoties spausdintuvui, kurio programinę įrangą reikia atnaujinti." #~ msgid "Cannot send the print task when the upgrade is in progress" #~ msgstr "Negalima nusiųsti spausdinimo užduočių programinės įrangos atnaujinimo metu" #~ msgid "The printer is required to be in the same LAN as Orca Slicer." #~ msgstr "Spausdintuvas privalo būti tame pačiame vietiniame tinkle (LAN) kaip ir „OrcaSlicer“." #~ msgid "Slice ok." #~ msgstr "Sluoksniavimas baigtas." #~ msgid "Get ticket from device timeout" #~ msgstr "Įrenginio bilieto laukimo laikas baigėsi" #~ msgid "Get ticket from server timeout" #~ msgstr "Serverio bilieto laukimo laikas baigėsi" #~ msgid "A prime tower is required for smooth timelapse. There may be flaws on the model without prime tower. Are you sure you want to disable prime tower?" #~ msgstr "Norint sklandžiai įrašyti laiko tarpų (timelapse) vaizdo įrašą, reikalingas valymo bokštas. Be valymo bokšto modelyje gali atsirasti defektų. Ar tikrai norite išjungti valymo bokštą?" #~ msgid "A prime tower is required for smooth timelapse. There may be flaws on the model without prime tower. Do you want to enable prime tower?" #~ msgstr "Norint sklandžiai įrašyti laiko tarpų (timelapse) vaizdo įrašą, reikalingas valymo bokštas. Be valymo bokšto modelyje gali atsirasti defektų. Ar norite įjungti valymo bokštą?" #~ msgid "" #~ "Change these settings automatically?\n" #~ "Yes - Change these settings automatically\n" #~ "No - Do not change these settings for me" #~ msgstr "" #~ "Automatiškai pakeisti šiuos nustatymus?\n" #~ "Taip - Pakeiskite šiuos nustatymus automatiškai.\n" #~ "Ne - Nekeiskite šių nustatymų už mane" #~ msgid "Support filament" #~ msgstr "Atramų gija" #, c-format, boost-format #~ msgid "" #~ "Following line %s contains reserved keywords.\n" #~ "Please remove it, or will beat G-code visualization and printing time estimation." #~ msgid_plural "" #~ "Following lines %s contain reserved keywords.\n" #~ "Please remove them, or will beat G-code visualization and printing time estimation." #~ msgstr[0] "" #~ "Šioje eilutėje %s yra rezervuotų raktinių žodžių.\n" #~ "Pašalinkite jas, kitaip sutriks G-kodo vizualizavimas ir spausdinimo laiko skaičiavimas." #~ msgstr[1] "" #~ "Šiose eilutėse %s yra rezervuotų raktinių žodžių.\n" #~ "Pašalinkite jas, kitaip sutriks G-kodo vizualizavimas ir spausdinimo laiko skaičiavimas." #~ msgstr[2] "" #~ "Šiose eilutėse %s yra rezervuotų raktinių žodžių.\n" #~ "Pašalinkite ją, kitaip sutriks G-kodo vizualizavimas ir spausdinimo laiko skaičiavimas." #~ msgid "Recommended nozzle temperature range of this filament. 0 means no set" #~ msgstr "Rekomenduojamas šios gijos purkštuko temperatūros diapazonas. 0 reiškia, kad nenustatyta" #~ msgid "Bed temperature when the Cool Plate is installed. A value of 0 means the filament does not support printing on the Cool Plate." #~ msgstr "Spausdinimo pagrindo temperatūra, kai naudojamas šaltas pagrindas. Reikšmė 0 reiškia, kad gija nepritaikyta spausdinti ant šalto pagrindo." #~ msgid "Bed temperature when the Textured Cool Plate is installed. A value of 0 means the filament does not support printing on the Textured Cool Plate." #~ msgstr "Spausdinimo pagrindo temperatūra, kai naudojamas tekstūruotas šaltas pagrindas. Reikšmė 0 reiškia, kad gija nepritaikyta spausdinti ant tekstūruoto šalto pagrindo." #~ msgid "Bed temperature when the Engineering Plate is installed. A value of 0 means the filament does not support printing on the Engineering Plate." #~ msgstr "Spausdinimo pagrindo temperatūra, kai naudojamas inžinerinis pagrindas. Reikšmė 0 reiškia, kad gija nepritaikyta spausdinti ant inžinerinio pagrindo." #~ msgid "Bed temperature when the Smooth PEI Plate/High Temperature Plate is installed. A value of 0 means the filament does not support printing on the Smooth PEI Plate/High Temp Plate." #~ msgstr "Spausdinimo pagrindo temperatūra, kai naudojamas lygus PEI pagrindas / aukštos temperatūros pagrindas. Reikšmė 0 reiškia, kad gija nepritaikyta spausdinti ant lygaus PEI pagrindo / aukštos temperatūros pagrindo." #~ msgid "Bed temperature when the Textured PEI Plate is installed. A value of 0 means the filament does not support printing on the Textured PEI Plate." #~ msgstr "Spausdinimo pagrindo temperatūra, kai naudojamas tekstūruotas PEI pagrindas. Reikšmė 0 reiškia, kad gija nepritaikyta spausdinti ant tekstūruoto PEI pagrindo." #~ msgid "Part cooling fan speed will start to run at min speed when the estimated layer time is no longer than the layer time in setting. When layer time is shorter than threshold, fan speed is interpolated between the minimum and maximum fan speed according to layer printing time" #~ msgstr "Detalių aušinimo ventiliatorius veiks mažiausiu ventiliatoriaus greičiu, kai numatoma sluoksnio trukmė bus ilgesnė už ribinę vertę. Kai sluoksnio trukmė trumpesnė už ribinę vertę, ventiliatoriaus greitis bus apskaičiuojamas tarp mažiausio ir didžiausio ventiliatoriaus greičio, atsižvelgiant į sluoksnio spausdinimo trukmę" #~ msgid "Part cooling fan speed will be max when the estimated layer time is shorter than the setting value" #~ msgstr "Detalių aušinimo ventiliatorius veiks didžiausiu greičiu, kai numatoma sluoksnio trukmė bus trumpesnė už ribinę vertę" #~ msgid "Following preset will be deleted too." #~ msgid_plural "Following presets will be deleted too." #~ msgstr[0] "Šis profilis taip pat bus ištrintas." #~ msgstr[1] "Šie profiliai taip pat bus ištrinti." #~ msgstr[2] "Šie profiliai taip pat bus ištrinti." #, boost-format #~ msgid "Are you sure to %1% the selected preset?" #~ msgstr "Ar tikrai norite %1% pasirinktą profilį?" #, c-format, boost-format #~ msgid "Left: %s" #~ msgstr "Kairėje: %s" #, c-format, boost-format #~ msgid "Right: %s" #~ msgstr "Dešinėje: %s" #~ msgid "Click to drop current modify and reset to saved value." #~ msgstr "Spustelėkite , jei norite atsisakyti dabartinio pakeitimo ir atstatyti išsaugotą reikšmę." #~ msgid "Undef" #~ msgstr "Neapib" #~ msgid "Unsaved Changes" #~ msgstr "Neišsaugoti pakeitimai" #~ msgid "All changes will not be saved" #~ msgstr "Pakeitimai nebus išsaugoti" #~ msgid "Move selection 10 mm in positive Y direction" #~ msgstr "Perkelti pasirinkimą 10 mm teigiama Y kryptimi" #~ msgid "Move selection 10 mm in negative Y direction" #~ msgstr "Perkelti pasirinkimą 10 mm neigiama Y kryptimi" #~ msgid "Move selection 10 mm in negative X direction" #~ msgstr "Perkelti pasirinkimą 10 mm neigiama X kryptimi" #~ msgid "Move selection 10 mm in positive X direction" #~ msgstr "Perkelti pasirinkimą 10 mm teigiama X kryptimi" #~ msgid "Movement step set to 1 mm" #~ msgstr "Judėjimo žingsnis nustatytas į 1 mm" #~ msgid "Click OK to update the Network plug-in when Orca Slicer launches next time." #~ msgstr "Spustelėkite OK, kad kitą kartą paleidus \"Orca Slicer\" būtų atnaujintas tinklo papildinys." #~ msgid "An important update was detected and needs to be run before printing can continue. Do you want to update now? You can also update later from 'Upgrade firmware'." #~ msgstr "Aptiktas svarbus atnaujinimas, kurį būtina įdiegti prieš tęsiant spausdinimą. Ar norite atnaujinti dabar? Atnaujinti galėsite ir vėliau, pasirinkę „Atnaujinti programinę aparatinę įrangą“." #~ msgid "The firmware version is abnormal. Repairing and updating are required before printing. Do you want to update now? You can also update later on printer or update next time starting Orca." #~ msgstr "Aptikta neįprasta programinės aparatinės įrangos versija. Prieš spausdinant reikalingas jos atkūrimas ir atnaujinimas. Ar norite atnaujinti dabar? Tai atlikti galėsite ir vėliau pačiame spausdintuve arba kitą kartą paleidę „Orca“." #~ msgid "Need to check the unsaved changes before configuration updates." #~ msgstr "Prieš atnaujinant konfigūraciją reikia patikrinti neišsaugotus pakeitimus." #, boost-format #~ msgid "Object can't be printed for empty layer between %1% and %2%." #~ msgstr "Objekto negalima spausdinti dėl tuščio sluoksnio tarp %1% ir %2%." #~ msgid "Maybe parts of the object at these height are too thin, or the object has faulty mesh" #~ msgstr "Gali būti, kad objekto dalys šiame aukštyje yra per plonos arba objekto tinklelis (mesh) turi klaidų" #~ msgid "No object can be printed. Maybe too small" #~ msgstr "Negalima spausdinti jokio objekto. Jis gali būti per mažas" #~ msgid "" #~ "Input shaping is not supported by Marlin < 2.1.2.\n" #~ "Check your firmware version and update your G-code flavor to ´Marlin 2´" #~ msgstr "" #~ "„Input shaping“ funkcija nepalaikoma „Marlin“ versijose, senesnėse nei 2.1.2.\n" #~ "Patikrinkite savo programinės aparatinės įrangos versiją ir atnaujinkite G-kodo tipą (G-code flavor) į „Marlin 2“." #~ msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2" #~ msgstr "„Input shaping“ funkcija palaikoma tik „Klipper“, „RepRapFirmware“ ir „Marlin 2“ programinėje aparatinėje įrangoje" #, boost-format #~ msgid "Failed to calculate line width of %1%. Cannot get value of \"%2%\" " #~ msgstr "Nepavyko apskaičiuoti %1% linijos pločio. Nepavyksta gauti „%2%“ reikšmės." #~ msgid "file too large" #~ msgstr "per didelis failas" #~ msgid "unsupported multidisk" #~ msgstr "kelių diskų (multidisk) archyvai nepalaikomi" #~ msgid "buffer too small" #~ msgstr "per mažas buferis" #~ msgid "archive too large" #~ msgstr "per didelis archyvas" #, boost-format #~ msgid "%1% is too close to exclusion area, there may be collisions when printing." #~ msgstr "%1% yra per arti uždraustos srities, spausdinant gali įvykti susidūrimų." #~ msgid " is too close to exclusion area, and collisions will be caused.\n" #~ msgstr " yra per arti uždraustosios zonos, todėl įvyks susidūrimai.\n" #~ msgid "The spiral vase mode does not work when an object contains more than one materials." #~ msgstr "Spiralinės vazos (vase mode) režimas neveikia, kai objektą sudaro daugiau nei viena medžiaga." #~ msgid "The prime tower is not supported in \"By object\" print." #~ msgstr "Valymo bokštas nepalaikomas spausdinant seka „Pagal objektą“." #~ msgid "The prime tower is not supported when adaptive layer height is on. It requires that all objects have the same layer height." #~ msgstr "Valymo bokštas nepalaikomas, kai įjungtas adaptyvusis sluoksnio aukštis. Visi objektai privalo turėti vienodą sluoksnio aukštį." #~ msgid "The prime tower requires \"support gap\" to be multiple of layer height." #~ msgstr "Valymo bokštui reikia, kad „atramos tarpas“ (support gap) būtų sluoksnio aukščio kartotinis." #~ msgid "The prime tower requires that all objects have the same layer heights." #~ msgstr "Valymo bokštui reikia, kad visų objektų sluoksnio aukštis būtų vienodas." #~ msgid "The prime tower requires that all objects are printed over the same number of raft layers." #~ msgstr "Valymo bokštui reikia, kad visi objektai būtų spausdinami ant vienodo skaičiaus platformos sluoksnių." #~ msgid "The prime tower requires that all objects are sliced with the same layer heights." #~ msgstr "Valymo bokštui reikia, kad visi objektai būtų supjaustyti vienodu sluoksnių aukščiu." #~ msgid "Too small line width" #~ msgstr "Per mažas linijos plotis" #~ msgid "Too large line width" #~ msgstr "Per didelis linijos plotis" #~ msgid "The prime tower requires that support has the same layer height with object." #~ msgstr "Valymo bokštui reikia, kad atramų ir objekto sluoksnių aukščiai sutaptų." #~ msgid "Failed processing of the filename_format template." #~ msgstr "Nepavyko apdoroti šablono filename_format." #~ msgid "Bed exclude area" #~ msgstr "Nespausdinama pagrindo sritis" #~ msgid "Shrinks the first layer on build plate to compensate for elephant foot effect." #~ msgstr "Taip sutraukiamas pirmasis spausdinio sluoksnis, kad būtų kompensuotas dramblio pėdos efektas." #~ msgid "Slicing height for each layer. Smaller layer height means more accurate and more printing time." #~ msgstr "Tai kiekvieno sluoksnio aukštis. Mažesni sluoksnių aukščiai užtikrina didesnį tikslumą, bet ilgesnį spausdinimo laiką." #~ msgid "Maximum printable height which is limited by mechanism of printer." #~ msgstr "Tai didžiausias spausdinamas aukštis, kurį riboja spausdinimo zonos aukštis." #~ msgid "Ignore HTTPS certificate revocation checks in case of missing or offline distribution points. One may want to enable this option for self signed certificates if connection fails." #~ msgstr "Nepaisyti HTTPS sertifikato atšaukimo patikrų, jei paskirstymo taškų trūksta arba jie neprisijungę. Jei nepavyksta prisijungti, galite įjungti šią parinktį savarankiškai pasirašytiems sertifikatams." #~ msgid "Detour to avoid traveling across walls, which may cause blobs on the surface." #~ msgstr "Formuoti apylankas, kad judant nebūtų kertamos sienelės – taip išvengiama apnašų (blobs) ant modelio paviršiaus." #~ msgid "Maximum detour distance for avoiding crossing wall. Don't detour if the detour distance is larger than this value. Detour length could be specified either as an absolute value or as percentage (for example 50%) of a direct travel path. Zero to disable." #~ msgstr "Maksimalus apylankos atstumas sienelių kirtimui išvengti. Apylanka nedaroma, jei jos atstumas viršija šią reikšmę. Apylankos ilgis gali būti nurodomas absoliučia verte arba procentais (pavyzdžiui, 50 %) nuo tiesioginio judėjimo trajektorijos. Įrašius 0 – funkcija išjungiama." #~ msgid "Bed temperature for layers except the initial one. A value of 0 means the filament does not support printing on the Cool Plate." #~ msgstr "Pagrindo temperatūra visiems sluoksniams, išskyrus pirmąjį. Reikšmė 0 reiškia, kad ši gija nepritaikyta spausdinti ant šalto pagrindo (Cool Plate)." #~ msgid "Bed temperature for layers except the initial one. A value of 0 means the filament does not support printing on the Textured Cool Plate." #~ msgstr "Pagrindo temperatūra visiems sluoksniams, išskyrus pirmąjį. Reikšmė 0 reiškia, kad ši gija nepritaikyta spausdinti ant tekstūruoto šalto pagrindo (Textured Cool Plate)." #~ msgid "Bed temperature for layers except the initial one. A value of 0 means the filament does not support printing on the Engineering Plate." #~ msgstr "Pagrindo temperatūra visiems sluoksniams, išskyrus pirmąjį. Reikšmė 0 reiškia, kad ši gija nepritaikyta spausdinti ant inžinerinio pagrindo (Engineering Plate)." #~ msgid "Bed temperature for layers except the initial one. A value of 0 means the filament does not support printing on the High Temp Plate." #~ msgstr "Pagrindo temperatūra visiems sluoksniams, išskyrus pirmąjį. Reikšmė 0 reiškia, kad ši gija nepritaikyta spausdinti ant aukštos temperatūros pagrindo (High Temp Plate)." #~ msgid "Bed temperature for layers except the initial one. A value of 0 means the filament does not support printing on the Textured PEI Plate." #~ msgstr "Pagrindo temperatūra visiems sluoksniams, išskyrus pirmąjį. Reikšmė 0 reiškia, kad ši gija nepritaikyta spausdinti ant tekstūruoto PEI pagrindo (Textured PEI Plate)." #~ msgid "Bed temperature of the first layer. A value of 0 means the filament does not support printing on the Cool Plate SuperTack." #~ msgstr "Pirmojo sluoksnio pagrindo temperatūra. Reikšmė 0 reiškia, kad ši gija nepritaikyta spausdinti ant „Cool Plate SuperTack“ pagrindo." #~ msgid "Bed temperature of the first layer. A value of 0 means the filament does not support printing on the Cool Plate." #~ msgstr "Pirmojo sluoksnio pagrindo temperatūra. Reikšmė 0 reiškia, kad ši gija nepritaikyta spausdinti ant šalto pagrindo (Cool Plate)." #~ msgid "Bed temperature of the first layer. A value of 0 means the filament does not support printing on the Textured Cool Plate." #~ msgstr "Pirmojo sluoksnio pagrindo temperatūra. Reikšmė 0 reiškia, kad ši gija nepritaikyta spausdinti ant tekstūruoto šalto pagrindo (Textured Cool Plate)." #~ msgid "Bed temperature of the first layer. A value of 0 means the filament does not support printing on the Engineering Plate." #~ msgstr "Pirmojo sluoksnio pagrindo temperatūra. Reikšmė 0 reiškia, kad ši gija nepritaikyta spausdinti ant inžinerinio pagrindo (Engineering Plate)." #~ msgid "Bed temperature of the first layer. A value of 0 means the filament does not support printing on the High Temp Plate." #~ msgstr "Pirmojo sluoksnio pagrindo temperatūra. Reikšmė 0 reiškia, kad ši gija nepritaikyta spausdinti ant aukštos temperatūros pagrindo (High Temp Plate)." #~ msgid "Bed temperature of the first layer. A value of 0 means the filament does not support printing on the Textured PEI Plate." #~ msgstr "Pirmojo sluoksnio pagrindo temperatūra. Reikšmė 0 reiškia, kad ši gija nepritaikyta spausdinti ant tekstūruoto PEI pagrindo (Textured PEI Plate)." #~ msgid "Bed types supported by the printer." #~ msgstr "Spausdintuvo palaikomi pagrindo tipai." #~ msgid "The number of bottom solid layers is increased when slicing if the thickness calculated by bottom shell layers is thinner than this value. This can avoid having too thin shell when layer height is small. 0 means that this setting is disabled and thickness of bottom shell is absolutely determined by bottom shell layers." #~ msgstr "Pjaustant didinamas apatinių vientisų sluoksnių skaičius, jei pagal apatinius apvalkalo sluoksnius apskaičiuotas storis yra plonesnis už šią vertę. Taip galima išvengti per plono apvalkalo, kai sluoksnių aukštis yra mažas. 0 reiškia, kad šis nustatymas išjungtas ir apatinio apvalkalo storis visiškai nustatomas pagal apatinio apvalkalo sluoksnius." #~ msgid "Slow down for overhang" #~ msgstr "Sulėtinti greitį dėl iškyšų" #~ msgid "Enable this option to slow printing down for different overhang degree." #~ msgstr "Įjunkite šią parinktį, kad spausdinimo greitis būtų mažinamas proporcingai pagal iškyšos pasvirimo laipsnį." #~ msgid "Distance from model to the outermost brim line." #~ msgstr "Atstumas nuo modelio iki tolimiausios apvado linijos." #~ msgid "A gap between innermost brim line and object can make brim be removed more easily." #~ msgstr "Tarpas tarp artimiausios apvado linijos ir objekto leidžia lengviau pašalinti apvadą po spausdinimo." #~ msgid "A boolean expression using the configuration values of an active printer profile. If this expression evaluates to true, this profile is considered compatible with the active printer profile." #~ msgstr "Loginė išraiška, kurioje naudojamos aktyvaus spausdintuvo profilio konfigūracijos vertės. Jei ši išraiška yra \"tiesa\", šis profilis laikomas suderinamu su aktyviu spausdintuvo profiliu." #~ msgid "A boolean expression using the configuration values of an active print profile. If this expression evaluates to true, this profile is considered compatible with the active print profile." #~ msgstr "Loginė išraiška, naudojanti aktyvaus spausdinimo profilio konfigūracijos reikšmes. Jei šios išraiškos rezultatas yra teigiamas (true), šis profilis laikomas suderinamu su aktyviuoju spausdinimo profiliu." #~ msgid "Print sequence, layer by layer or object by object." #~ msgstr "Spausdinimo seka: sluoksnis po sluoksnio arba objektas po objekto." #~ msgid "Enable this option to slow printing speed down to make the final layer time not shorter than the layer time threshold in \"Max fan speed threshold\", so that layer can be cooled for longer time. This can improve the cooling quality for needle and small details." #~ msgstr "Įjunkite šią parinktį, kad sumažintumėte spausdinimo greitį, užtikrinant, jog sluoksnio spausdinimo laikas nebūtų trumpesnis už ribą, nurodytą nustatyme „Maksimalaus ventiliatoriaus greičio slenkstis“. Taip sluoksnis aušinamas ilgiau, o tai pastebimai pagerina smailių viršūnių bei smulkių elementų spausdinimo kokybę." #~ msgid "The default acceleration of both normal printing and travel except initial layer." #~ msgstr "Numatytasis pagreitis tiek spausdinimo, tiek tuščiosios eigos (travel) judesiams, išskyrus pirmąjį sluoksnį." #~ msgid "Don't support the whole bridge area which make support very large. Bridges can usually be printed directly without support if not very long." #~ msgstr "Nekurti atramų po ištisomis tiltelių sritimis, dėl kurių atramų struktūros tampa labai didelės. Jei tilteliai nėra itin ilgi, jie paprastai gali būti sėkmingai atspausdinami tiesiai ore be jokių atramų." #~ msgid "Max length of bridges that don't need support. Set it to 0 if you want all bridges to be supported, and set it to a very large value if you don't want any bridges to be supported." #~ msgstr "Maksimalus tiltelių, kuriems nereikia atramų, ilgis. Nustatykite 0, jei norite, kad atramos būtų kuriamos po visais tilteliais. Įrašykite labai didelę reikšmę, jei norite, kad tilteliai visada būtų spausdinami be atramų." #~ msgid "End G-code when finishing the entire print." #~ msgstr "Pabaigos G-kodas, vykdomas baigus visą spausdinimą." #~ msgid "End G-code when finishing the printing of this filament." #~ msgstr "Pabaigos G-kodas, vykdomas baigus spausdinti šią giją." #~ msgid "Line pattern of top surface infill." #~ msgstr "Tai viršutinio paviršiaus užpildymo linijomis modelis." #~ msgid "Line pattern of bottom surface infill, not bridge infill." #~ msgstr "Tai apatinio paviršiaus užpildymo linijioms raštas, išskyrus tiltų užpildymą." #~ msgid "Speed of outer wall which is outermost and visible. It's used to be slower than inner wall speed to get better quality." #~ msgstr "Išorinės (pačios labiausiai matomos) sienelės spausdinimo greitis. Siekiant geresnės vizualinės kokybės, jis paprastai nustatomas mažesnis nei vidinių sienelių greitis." #~ msgid "Distance of the nozzle tip to the lower rod. Used for collision avoidance in by-object printing." #~ msgstr "Atstumas nuo purkštuko galiuko iki žemiausio ašies strypo. Naudojamas siekiant išvengti spausdinimo galvutės susidūrimų, kai pasirinkta seka „Objektas po objekto“." #~ msgid "Distance of the nozzle tip to the lid. Used for collision avoidance in by-object printing." #~ msgstr "Atstumas nuo purkštuko galiuko iki korpuso dangčio. Naudojamas siekiant išvengti spausdinimo galvutės susidūrimų, kai pasirinkta seka „Objektas po objekto“." #~ msgid "Clearance radius around extruder. Used for collision avoidance in by-object printing." #~ msgstr "Laisvos vietos spindulys (clearance) aplink ekstruderį. Naudojamas saugaus atstumo išlaikymui spausdinant sekone „Objektas po objekto“." #~ msgid "Enable adaptive pressure advance for overhangs (beta)" #~ msgstr "Įjungti adaptyvų slėgio kompensavimą (PA) iškyšoms (beta)" #~ msgid "Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n" #~ msgstr "" #~ "Įjungti prisitaikantį (PA) iškyšoms, taip pat kai srautas keičiasi tame pačiame elemente. Tai eksperimentinė parinktis, nes jei (PA) profilis nustatomas netiksliai, gali kilti išorinių paviršių vienodumo problemų prieš iškyšas ir už jų.\n" #~ "\n" #~ msgid "Pressure advance for bridges" #~ msgstr "Tiltų slėgio kompensavimas (PA)" #~ msgid "" #~ "Pressure advance value for bridges. Set to 0 to disable.\n" #~ "\n" #~ "A lower PA value when printing bridges helps reduce the appearance of slight under extrusion immediately after bridges. This is caused by the pressure drop in the nozzle when printing in the air and a lower PA helps counteract this." #~ msgstr "" #~ "Slėgio kompensavimo (PA) reikšmė spausdinant tiltus. Nustatykite 0, jei norite išjungti.\n" #~ "\n" #~ "Mažesnė PA reikšmė spausdinant tiltus padeda sumažinti nežymų plastiko trūkumą (under-extrusion) iškart po tilto formavimo. Šį trūkumą sukelia slėgio kritimas purkštuke spausdinant „ore“, o mažesnė PA reikšmė padeda šį efektą kompensuoti." #~ msgid "Enabling this setting means that the part cooling fan will never stop completely and will run at least at minimum speed to reduce the frequency of starting and stopping." #~ msgstr "Aktyvavus šį nustatymą, detalės aušinimo ventiliatorius niekada visiškai nesustos ir suksis bent minimaliu greičiu – tai sumažina nuolatinio ventiliatoriaus stabdymo ir paleidimo dažnį." #~ msgid "Part cooling fan will be enabled for layers of which estimated time is shorter than this value. Fan speed is interpolated between the minimum and maximum fan speeds according to layer printing time." #~ msgstr "Detalės aušinimo ventiliatorius bus suaktyvintas tiems sluoksniams, kurių preliminarus spausdinimo laikas yra trumpesnis už šią reikšmę. Ventiliatoriaus sūkiai bus interpoliuojami tarp minimalaus ir maksimalaus greičio, priklausomai nuo sluoksnio spausdinimo trukmės." #~ msgid "Minimum HRC of nozzle required to print the filament. Zero means no checking of nozzle's HRC." #~ msgstr "Minimalus purkštuko HRC, reikalingas spausdinti šia gija. Nulis reiškia, kad purkštuko HRC netikrinama." #~ msgid "This setting stands for how much volume of filament can be melted and extruded per second. Printing speed is limited by max volumetric speed, in case of too high and unreasonable speed setting. Can't be zero." #~ msgstr "Gijos tūris, kurį galima išlydyti ir išspausti per sekundę. Jei nustatytas per didelis ir nepagrįstas greitis, spausdinimo greitį riboja maksimalus tūrinis greitis. Ši reikšmė negali būti lygi nuliui." #~ msgid "Filament diameter is used to calculate extrusion in G-code, so it is important and should be accurate." #~ msgstr "G-kodo ekstruzijos apskaičiavimui naudojamas gijos skersmuo, todėl jis yra svarbus ir turi būti tikslus." #~ msgid "Filament density. For statistics only." #~ msgstr "Gijų tankis, tik statistikai." #~ msgid "The material type of filament." #~ msgstr "Gijos medžiagos tipas." #~ msgid "The material softens at this temperature, so when the bed temperature is equal to or greater than this, it's highly recommended to open the front door and/or remove the upper glass to avoid clogging." #~ msgstr "Esant tokiai temperatūrai medžiaga suminkštėja, todėl, kai pagrindo temperatūra yra lygi arba didesnė už ją, labai rekomenduojama atidaryti priekines dureles ir (arba) nuimti viršutinį stiklą, kad būtų išvengta užsikimšimo." #~ msgid "Filament price. For statistics only." #~ msgstr "Gijos kaina, tik statistikai." #~ msgid "Angle for sparse infill pattern, which controls the start or main direction of line." #~ msgstr "Reto užpildo rašto kampas, kuris valdo linijos pradžią arba pagrindinę kryptį." #~ msgid "Line pattern for internal sparse infill." #~ msgstr "Linijų raštas vidiniam retam užpildui." #~ msgid "Acceleration of top surface infill. Using a lower value may improve top surface quality." #~ msgstr "Viršutinio paviršiaus užpildo pagreitis. Naudojant mažesnę vertę gali pagerėti viršutinio paviršiaus kokybė." #~ msgid "Acceleration of outer wall. Using a lower value can improve quality." #~ msgstr "Išorinės sienelės pagreitis. Naudojant mažesnę vertę galima pagerinti kokybę." #~ msgid "Acceleration of the first layer. Using a lower value can improve build plate adhesion." #~ msgstr "Tai pirmojo sluoksnio spausdinimo pagreitis. Naudojant ribotą pagreitį galima pagerinti sukibimą su pagrindu." #~ msgid "Speed of the first layer except the solid infill part." #~ msgstr "Pirmojo sluoksnio greitis, išskyrus vientiso užpildo dalį." #~ msgid "Speed of solid infill part of the first layer." #~ msgstr "Pirmojo sluoksnio vientiso užpildo dalies greitis." #~ msgid "Nozzle temperature for printing the first layer when using this filament." #~ msgstr "Purkštuko temperatūra pradiniam sluoksniui spausdinti, kai naudojama ši gija." #~ msgid "Randomly jitter while printing the wall, so that the surface has a rough look. This setting controls the fuzzy position." #~ msgstr "Atsitiktinis virpesys spausdinant sienelę, kad paviršius įgautų grublėtą išvaizdą. Šis nustatymas valdo grublėtumo (fuzzy skin) poziciją.." #~ msgid "The width within which to jitter. It's advised to be below outer wall line width." #~ msgstr "Plotis, kurio ribose atliekamas virpesys. Rekomenduojama, kad jis būtų mažesnis už išorinės sienelės linijos plotį." #~ msgid "Speed of gap infill. Gap usually has irregular line width and should be printed more slowly." #~ msgstr "Tarpų užpildo greitis. Tarpai paprastai būna netaisyklingo linijos pločio, todėl juos reikėtų spausdinti lėčiau." #~ msgid "Enable this to enable the camera on printer to check the quality of first layer." #~ msgstr "Įjunkite, kad spausdintuvo kamera patikrintų pirmojo sluoksnio kokybę." #~ msgid "The metallic material of nozzle. This determines the abrasive resistance of nozzle, and what kind of filament can be printed." #~ msgstr "Purkštuko metalo lydinys. Tai lemia purkštuko atsparumą abrazyvui ir nurodo, kokias gijas galima spausdinti." #~ msgid "Undefine" #~ msgstr "Neapibrėžta" #~ msgid "The nozzle's hardness. Zero means no checking for nozzle's hardness during slicing." #~ msgstr "Purkštuko kietumas. Nulis reiškia, kad pjaustymo metu purkštuko kietumas nebus tikrinamas." #~ msgid "Support control chamber temperature" #~ msgstr "Kameros temperatūros valdymo palaikymas" #~ msgid "Automatically Combine sparse infill of several layers to print together to reduce time. Wall is still printed with original layer height." #~ msgstr "Automatiškai apjungia kelių sluoksnių retą užpildą bendram spausdinimui, kad sutrumpėtų laikas. Sienelė vis tiek spausdinama išlaikant pradinį sluoksnio aukštį." #~ msgid "Infill/Wall overlap" #~ msgstr "Užpildo ir sienelės persidengimas" #, no-c-format, no-boost-format #~ msgid "Infill area is enlarged slightly to overlap with wall for better bonding. The percentage value is relative to line width of sparse infill. Set this value to ~10-15% to minimize potential over extrusion and accumulation of material resulting in rough top surfaces." #~ msgstr "Užpildo plotas yra šiek tiek padidinamas, kad persidengtų su sienele geresniam sukibimui. Procentinė vertė yra santykinė su reto užpildo linijos pločiu. Nustatykite šią vertę ties ~10–15%%, kad sumažintumėte perteklinio išspaudimo (overextrusion) ir medžiagos sankaupų riziką, dėl kurios viršutiniai paviršiai tampa šiurkštūs." #~ msgid "Speed of internal sparse infill." #~ msgstr "Vidinio reto užpildo greitis." #~ msgid "Maximum width of a segmented region. Zero disables this feature." #~ msgstr "Didžiausias segmentuotos srities plotis. Nulis išjungia šią funkciją." #~ msgid "Ironing Type" #~ msgstr "Lyginimo tipas" #~ msgid "Ironing is using small flow to print on same height of surface again to make flat surface more smooth. This setting controls which layer being ironed." #~ msgstr "Lyginimo metu naudojamas nedidelis medžiagos srautas, pakartotinai spausdinant tame pačiame paviršiaus aukštyje, kad plokščia dalis taptų lygesnė. Šis nustatymas valdo, kurie sluoksniai yra lyginami." #~ msgid "Top surfaces" #~ msgstr "Viršutiniai paviršiai" #~ msgid "Topmost surface" #~ msgstr "Pats viršutinis paviršius (Topmost)" #~ msgid "The amount of material to extrude during ironing. Relative to flow of normal layer height. Too high value results in overextrusion on the surface." #~ msgstr "Medžiagos kiekis, išspaudžiamas lyginimo metu. Santykinis dydis, skaičiuojamas pagal įprasto sluoksnio aukščio srautą. Per didelė vertė sukelia perteklinį medžiagos išspaudimą (overextrusion) ant paviršiaus." #~ msgid "The distance between the lines of ironing." #~ msgstr "Atstumas tarp lyginimui naudojamų linijų." #~ msgid "Print speed of ironing lines." #~ msgstr "Lyginimo linijų spausdinimo greitis." #~ msgid "Supports silent mode" #~ msgstr "Palaikomas tylusis režimas" #~ msgid "Whether the machine supports silent mode in which machine use lower acceleration to print." #~ msgstr "Ar įrenginys palaiko tylųjį režimą, kai spausdindamas naudoja mažesnį pagreitį." #~ msgid "Part cooling fan speed may be increased when auto cooling is enabled. This is the maximum speed for the part cooling fan." #~ msgstr "Kai įjungtas automatinis aušinimas, modelio aušinimo ventiliatoriaus greitis gali būti padidintas. Tai yra didžiausias modelio aušinimo ventiliatoriaus greitis." #~ msgid "Volume of nozzle between the cutter and the end of nozzle." #~ msgstr "Purkštuko tūris tarp pjaustytuvo ir purkštuko galo." #~ msgid "The start and end points which is from cutter area to garbage can." #~ msgstr "Pradžios ir pabaigos taškai, esantys tarp gijos kirpimo zonos ir atliekų konteinerio." #~ msgid "Users can define the project file name when exporting." #~ msgstr "Eksportuodami vartotojai gali pasirinkti projekto failų pavadinimus." #, c-format, boost-format #~ msgid "Detect the overhang percentage relative to line width and use different speed to print. For 100%% overhang, bridge speed is used." #~ msgstr "Nustatyti iškyšos procentinę dalį, palyginti su linijos pločiu, ir spausdinimui naudoti skirtingą greitį. Esant 100%% iškyšai, naudojamas tiltelių (bridging) greitis." #~ msgid "Speed of inner wall." #~ msgstr "Vidinių sienelių greitis." #~ msgid "Number of walls of every layer." #~ msgstr "Sienelių skaičius kiekviename sluoksnyje." #~ msgid "Expand all raft layers in XY plane." #~ msgstr "Išplėsti visus pagrindo (Raft) sluoksnius XY plokštumoje." #~ msgid "Density of the first raft or support layer." #~ msgstr "Pirmojo pagrindo (Raft) arba atraminio sluoksnio tankis." #~ msgid "Expand the first raft or support layer to improve bed plate adhesion." #~ msgstr "Išplėsti pirmąjį pagrindo (Raft) arba atraminį sluoksnį, kad pagerėtų sukibimas su spausdinimo pagrindu." #~ msgid "The G-code path is generated after simplifying the contour of models to avoid too many points and G-code lines. Smaller value means higher resolution and more time to slice." #~ msgstr "G-kodo (G-code) trajektorija generuojama supaprastinus modelio kontūrus, kad būtų išvengta per didelio taškų ir G-kodo eilučių skaičiaus. Mažesnė reikšmė užtikrina didesnę skiriamąją gebą, bet pailgina sluoksniavimo laiką." #~ msgid "The length of fast retraction before wipe, relative to retraction length." #~ msgstr "Greito įtraukimo prieš nuvalymą ilgis, palyginti su įtraukimo ilgiu." #~ msgid "Retract when change layer" #~ msgstr "Įtraukti, kai keičiamas sluoksnis" #~ msgid "Force a retraction when changes layer." #~ msgstr "Priverstinai atlikti gijos įtraukimą keičiantis sluoksniui." #~ msgid "Whenever the retraction is done, the nozzle is lifted a little to create clearance between nozzle and the print. It prevents nozzle from hitting the print when travel move. Using spiral lines to lift Z can prevent stringing." #~ msgstr "Atlikus įtraukimą, purkštukas šiek tiek pakeliamas virš modelio, kad susidarytų tarpas. Tai apsaugo, kad purkštukas tuščios eigos metu nekliudytų spaudinio. Spiralinis Z ašies kėlimas gali padėti išvengti gijų stygavimosi (stringing)." #~ msgid "Retraction Speed" #~ msgstr "Gijos įtraukimo greitis" #~ msgid "De-retraction Speed" #~ msgstr "Gijos sugrąžinimo greitis" #~ msgid "The start position to print each part of outer wall." #~ msgstr "Kiekvienos išorinės sienelės dalies pradinė padėtis." #~ msgid "The distance from the skirt to the brim or the object." #~ msgstr "Tai atstumas nuo apvado iki krašto arba objekto." #~ msgid "How many layers of skirt. Usually only one layer." #~ msgstr "Kiek sluoksnių apvado. Paprastai tik vienas sluoksnis." #~ msgid "Number of loops for the skirt. Zero means disabling skirt." #~ msgstr "Tai yra apvado kontūrų skaičius. 0 reiškia, kad apvadas išjungtas." #~ msgid "Sparse infill areas smaller than this threshold value are replaced by internal solid infill." #~ msgstr "Reto užpildo sritys, mažesnės už šią ribinę reikšmę, pakeičiamos vidiniu vientisu užpildu." #~ msgid "Speed of internal solid infill, not the top and bottom surface." #~ msgstr "Tai vidinio vientiso užpildo greitis, neįskaitant viršutinio ar apatinio paviršiaus." #~ msgid "Spiralize smooths out the Z moves of the outer contour. And turns a solid model into a single walled print with solid bottom layers. The final generated model has no seam." #~ msgstr "Tai leidžia atlikti spiralinį išlyginimą, kuris išlygina išorinio kontūro Z judesius ir paverčia vientisą modelį į vienos sienelės atspaudą su vientisais apatiniais sluoksniais. Galutiniame sudarytame modelyje nėra siūlės." #~ msgid "If smooth or traditional mode is selected, a timelapse video will be generated for each print. After each layer is printed, a snapshot is taken with the chamber camera. All of these snapshots are composed into a timelapse video when printing completes. If smooth mode is selected, the toolhead will move to the excess chute after each layer is printed and then take a snapshot. Since the melt filament may leak from the nozzle during the process of taking a snapshot, a prime tower is required for smooth mode to wipe nozzle." #~ msgstr "Jei pasirinktas sklandus (smooth) arba tradicinis režimas, kiekvienam spaudiniui bus generuojamas intervalinis vaizdo įrašas (timelapse). Atspausdinus kiekvieną sluoksnį, korpuso kamera padaro nuotrauką. Baigus spausdinti, visos nuotraukos sujungiamos į vieną intervalinį vaizdo įrašą. Jei pasirinktas sklandus režimas, po kiekvieno sluoksnio spausdinimo galvutė pasitrauks prie atliekų latako (excess chute) ir tik tada bus daroma nuotrauka. Kadangi fotografavimo metu iš purkštuko gali ištekėti išsilydžiusi gija, sklandžiam režimui reikalingas valymo bokštelis (prime tower) purkštuko nuvalymui." #~ msgid "Start G-code when starting the entire print." #~ msgstr "Pradžios G-kodas pradedant visą spausdinimą." #~ msgid "Start G-code when starting the printing of this filament." #~ msgstr "Pradžios G-kodas pradedant spausdinti šia gija." #~ msgid "Enable support generation." #~ msgstr "Įgalinti atramų generavimą." #~ msgid "XY separation between an object and its support." #~ msgstr "Šiuo parametru nustatomas objekto ir atramos XY atstumas." #~ msgid "Don't create support on model surface, only on build plate." #~ msgstr "Šis nustatymas generuoja tik tas atramas, kurios prasideda ant spausdinimo plokštės." #~ msgid "Interface use loop pattern" #~ msgstr "Sąsajai naudoti kontūro raštą" #~ msgid "Cover the top contact layer of the supports with loops. Disabled by default." #~ msgstr "Viršutinį kontaktinį atramų sluoksnį užpildyti uždarais kontūrais (loops). Gamykliškai išjungta." #~ msgid "Number of top interface layers." #~ msgstr "Viršutinių sąsajos sluoksnių skaičius." #~ msgid "Spacing of bottom interface lines. Zero means solid interface." #~ msgstr "Atstumas tarp apatinių sąsajos linijų. 0 reiškia vientisą sąsają." #~ msgid "Speed of support interface." #~ msgstr "Atramų sąsajų greitis." #~ msgid "Line pattern of support interface. Default pattern for non-soluble support interface is Rectilinear, while default pattern for soluble support interface is Concentric." #~ msgstr "Atramų sąsajos linijų raštas. Numatytasis netirpių atramų sąsajos raštas yra tiesiaeigis (Rectilinear), o tirpių atramų sąsajos – koncentrinis (Concentric)." #~ msgid "Spacing between support lines." #~ msgstr "Atstumai tarp atraminių linijų." #~ msgid "Normal Support expansion" #~ msgstr "Įprastų atramų horizontalus išplėtimas" #~ msgid "Speed of support." #~ msgstr "Atramų greitis." #~ msgid "Nozzle temperature for layers after the initial one." #~ msgstr "Po pradinio sluoksnio esančių sluoksnių purkštuko temperatūra." #~ msgid "Detect thin walls which can't contain two line widths, and use single line to print. Maybe not printed very well, because it's not a closed loop." #~ msgstr "Aptikti plonas sieneles, kuriose netelpa du linijos pločiai, ir spausdinimui naudoti vieną liniją. Gali būti atspausdinta prasčiau, kadangi tai nėra uždaras kontūras (loop)." #~ msgid "Speed of top surface infill which is solid." #~ msgstr "Viršutinio vientiso paviršiaus užpildo greitis." #~ msgid "This is the number of solid layers of top shell, including the top surface layer. When the thickness calculated by this value is thinner than top shell thickness, the top shell layers will be increased." #~ msgstr "Tai viršutinio apvalkalo (shell) vientisų sluoksnių skaičius, įskaitant patį viršutinį paviršiaus sluoksnį. Jei pagal šį skaičių apskaičiuotas storis yra mažesnis už nustatytą viršutinio apvalkalo storį, viršutinio apvalkalo sluoksnių skaičius bus automatiškai padidintas." #~ msgid "The number of top solid layers is increased when slicing if the thickness calculated by top shell layers is thinner than this value. This can avoid having too thin shell when layer height is small. 0 means that this setting is disabled and thickness of top shell is absolutely determined by top shell layers." #~ msgstr "Sluoksniuojant didinamas viršutinių vientisų sluoksnių skaičius, jei pagal viršutinius apvalkalo sluoksnius apskaičiuotas storis yra plonesnis už šią vertę. Taip galima išvengti per plono apvalkalo, kai sluoksnių aukštis yra mažas. 0 reiškia, kad šis nustatymas išjungtas ir viršutinio apvalkalo storis visiškai nustatomas pagal viršutinio apvalkalo sluoksnius." #~ msgid "Speed of travel which is faster and without extrusion." #~ msgstr "Tuščiojo judėjimo (travel) greitis, kai galvutė juda nespausdindama." #~ msgid "Move nozzle along the last extrusion path when retracting to clean any leaked material on the nozzle. This can minimize blobs when printing a new part after traveling." #~ msgstr "Atliekant gijos įtraukimą (retraction), judinti purkštuką išilgai paskutinės ekstruzijos trajektorijos, kad nusivalytų gijos likučiai. Tai padeda sumažinti gumbelių (blobs) susidarymą, kai po tuščiojo judėjimo pradedama spausdinti nauja dalis." #~ msgid "Wipe Distance" #~ msgstr "Valymo atstumas" #~ msgid "The wiping tower can be used to clean up the residue on the nozzle and stabilize the chamber pressure inside the nozzle, in order to avoid appearance defects when printing objects." #~ msgstr "Valymo bokštelis (wipe tower) naudojamas purkštuko likučiams nuvalyti ir slėgiui jo viduje stabilizuoti, kad spausdinant objektus būtų išvengta vizualių paviršiaus defektų." #~ msgid "The actual flushing volumes is equal to the flush multiplier multiplied by the flushing volumes in the table." #~ msgstr "Faktinis pravalymo (flushing) tūris yra lygus pravalymo daugikliui, padaugintam iš lentelėje nurodytų tūrių reikšmių." #~ msgid "The volume of material to prime extruder on tower." #~ msgstr "Medžiagos tūris, naudojamas ekstruderiui paruošti (prime) ant valymo bokštelio." #~ msgid "Width of the prime tower." #~ msgstr "Valymo bokštelio (prime tower) plotis." #~ msgid "Purging after filament change will be done inside objects' infills. This may lower the amount of waste and decrease the print time. If the walls are printed with transparent filament, the mixed color infill will be seen outside. It will not take effect, unless the prime tower is enabled." #~ msgstr "Pakeitus giją, pravalymas (purging) bus atliekamas spausdinamų objektų užpildo viduje. Tai padeda sumažinti gijos atliekų kiekį bei sutrumpinti spausdinimo laiką. Jei išorinės sienelės spausdinamos iš skaidrios gijos, sumaišytų spalvų užpildas gali matytis išorėje. Ši funkcija veikia tik tuomet, kai įjungtas valymo bokštelis." #~ msgid "Purging after filament change will be done inside objects' support. This may lower the amount of waste and decrease the print time. It will not take effect, unless the prime tower is enabled." #~ msgstr "Pakeitus giją, pravalymas (purging) bus atliekamas objektų atramų (support) viduje. Tai padeda sumažinti gijos atliekų kiekį bei sutrumpinti spausdinimo laiką. Ši funkcija veikia tik tuomet, kai įjungtas valymo bokštelis." #~ msgid "Holes in objects will expand or contract in the XY plane by the configured value. Positive values make holes bigger, negative values make holes smaller. This function is used to adjust sizes slightly when the objects have assembling issues." #~ msgstr "Objekto angos XY plokštumoje bus praplėstos arba susiaurintos pagal nurodytą reikšmę. Teigiamos reikšmės angas padidina, neigiamos – sumažina. Ši funkcija naudojama matmenims tikslinti, kai kyla spausdintų detalių surinkimo sunkumų." #~ msgid "Contours of objects will expand or contract in the XY plane by the configured value. Positive values make contours bigger, negative values make contours smaller. This function is used to adjust sizes slightly when the objects have assembling issues." #~ msgstr "Išoriniai objektų kontūrai XY plokštumoje bus praplėsti arba susiaurinti pagal nurodytą reikšmę. Teigiamos reikšmės kontūrą padidina, neigiamos – sumažina. Ši funkcija naudojama matmenims tikslinti, kai kyla spausdintų detalių surinkimo sunkumų." #~ msgid "Classic wall generator produces walls with constant extrusion width and for very thin areas is used gap-fill. Arachne engine produces walls with variable extrusion width." #~ msgstr "Klasikinis sienelių generatorius sukuria pastovaus išspaudimo pločio sieneles, o labai plonoms sritims naudoja tarpų užpildymą (gap-fill). „Arachne“ variklis sukuria kintamo išspaudimo pločio sieneles." #~ msgid "Export project as 3MF." #~ msgstr "Eksportuokite projektą kaip 3MF." #~ msgid "Export slicing data to a folder." #~ msgstr "Eksportuoti sluoksniavimo duomenis į katalogą." #~ msgid "Show command help." #~ msgstr "Rodoma komandos pagalba." #~ msgid "max triangle count per plate for slicing." #~ msgstr "maksimalus trikampių skaičius plokštelėje sluoksniavimui." #~ msgid "max slicing time per plate in seconds." #~ msgstr "maksimalus vienos plokštės sluoksniavimo laikas sekundėmis." #~ msgid "Output the model's information." #~ msgstr "Išvesti modelio informaciją." #~ msgid "Export settings to a file." #~ msgstr "Eksportuoti nustatymus į failą." #~ msgid "Load uptodate process/machine settings from the specified file when using uptodate." #~ msgstr "Naudojant „UpToDate“, įkelti naujausius proceso / mašinos nustatymus iš nurodyto failo." #~ msgid "Output directory for the exported files." #~ msgstr "Eksportuojamų failų išvesties katalogas." #~ msgid "The supplied file couldn't be read because it's empty" #~ msgstr "Pateikto failo nepavyko perskaityti, nes jis tuščias" #~ msgid "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." #~ msgstr "Nežinomas failo formatas. Įvesties failo plėtinys turi būti .stl, .obj, .amf(.xml)." #~ msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." #~ msgstr "Nežinomas failo formatas. Įvesties failo plėtinys turi būti .3mf arba .zip.amf." #~ msgid "How to use calibration result?" #~ msgstr "Kaip naudoti kalibravimo rezultatą?" #~ msgid "" #~ "This machine type can only hold 16 history results per nozzle. You can delete the existing historical results and then start calibration. Or you can continue the calibration, but you cannot create new calibration historical results.\n" #~ "Do you still want to continue the calibration?" #~ msgstr "" #~ "Šio tipo mašinoje galima laikyti tik 16 istorijos rezultatų iš vieno purkštuko. Galite ištrinti turimus ankstesnius rezultatus ir tada pradėti kalibravimą. Arba galite tęsti kalibravimą, tačiau negalite sukurti naujų kalibravimo istorijos rezultatų.\n" #~ "Ar vis dar norite tęsti kalibravimą?" #, c-format, boost-format #~ msgid "There is already a historical calibration result with the same name: %s. Only one of the results with the same name is saved. Are you sure you want to override the historical result?" #~ msgstr "Jau yra ankstesnio kalibravimo rezultatas tokiu pačiu pavadinimu: %s. Išsaugomas tik vienas iš to paties pavadinimo rezultatų. Ar tikrai norite pakeisti ankstesnį rezultatą?" #, c-format, boost-format #~ msgid "This machine type can only hold %d history results per nozzle. This result will not be saved." #~ msgstr "Šis įrenginio tipas gali talpinti tik %d istorijos rezultatų iš vieno purkštuko. Šis rezultatas nebus išsaugotas." #~ msgid "" #~ "Auto Flow Rate Calibration utilizes Bambu Lab's Micro-Lidar technology, directly measuring the calibration patterns. However, please be advised that the efficacy and accuracy of this method may be compromised with specific types of materials. Particularly, filaments that are transparent or semi-transparent, sparkling-particled, or have a high-reflective finish may not be suitable for this calibration and can produce less-than-desirable results.\n" #~ "\n" #~ "The calibration results may vary between each calibration or filament. We are still improving the accuracy and compatibility of this calibration through firmware updates over time.\n" #~ "\n" #~ "Caution: Flow Rate Calibration is an advanced process, to be attempted only by those who fully understand its purpose and implications. Incorrect usage can lead to sub-par prints or printer damage. Please make sure to carefully read and understand the process before doing it." #~ msgstr "" #~ "Automatinis srauto greičio kalibravimas naudoja \"Bambu Lab\" mikrolidarų technologiją, tiesiogiai matuojančią kalibravimo modelius. Tačiau atkreipkite dėmesį, kad šio metodo veiksmingumas ir tikslumas gali sumažėti naudojant tam tikrų tipų medžiagas. Ypač skaidrios ar pusiau skaidrios, blizgančios arba turinčios labai atspindinčią apdailą gijos gali būti netinkamos šiam kalibravimui ir gali duoti prastesnius nei pageidaujami rezultatus.\n" #~ "\n" #~ "Kalibravimo rezultatai gali skirtis priklausomai nuo kalibravimo ar gijų. Vykdydami programinės aparatinės įrangos atnaujinimus laikui bėgant vis dar tobuliname šio kalibravimo tikslumą ir suderinamumą.\n" #~ "\n" #~ "Įspėjimas: Srauto greičio kalibravimas yra sudėtingas procesas, kurį gali atlikti tik tie, kurie visiškai supranta jo paskirtį ir pasekmes. Neteisingas naudojimas gali lemti nekokybiškus spaudinius arba spausdintuvo sugadinimą. Prieš atlikdami šį procesą būtinai atidžiai susipažinkite ir supraskite jo eigą." #~ msgid "Refreshing the historical Flow Dynamics Calibration records" #~ msgstr "Senesnių srauto dinamikos kalibravimo įrašų atnaujinimas" #, c-format, boost-format #~ msgid "This machine type can only hold %d history results per nozzle." #~ msgstr "Šis įrenginio tipas gali talpinti tik %d ankstesnių rezultatų iš vieno purkštuko." #~ msgid "Vendor is not selected, please reselect vendor." #~ msgstr "Prekės ženklas nepasirinktas, pasirinkite prekės ženklą iš naujo." #~ msgid "Custom vendor is missing, please input custom vendor." #~ msgstr "Pasirinktinis prekės ženklas neįvestas, įveskite pasirinktinį prekės ženklą." #~ msgid "Filament serial is not entered, please enter serial." #~ msgstr "Gijos serija neįvesta, įveskite seriją." #~ msgid "There may be escape characters in the vendor or serial input of filament. Please delete and re-enter." #~ msgstr "Gijos prekės ženklo arba serijos įvesties laukelyje gali būti valdymo (escape) simbolių. Ištrinkite ir įveskite iš naujo." #~ msgid "The vendor cannot be a number. Please re-enter." #~ msgstr "Prekės ženklas negali būti skaičius. Įveskite iš naujo." #~ msgid "The model was not found, please reselect vendor." #~ msgstr "Modelis nerastas, iš naujo pasirinkite prekės ženklą." #~ msgid "Preset path was not found, please reselect vendor." #~ msgstr "Profilio kelias nerastas, iš naujo pasirinkite prekės ženklą." #~ msgid "The nozzle diameter was not found, please reselect." #~ msgstr "Purkštuko skersmuo nerastas, pasirinkite iš naujo." #~ msgid "The printer preset was not found, please reselect." #~ msgstr "Spausdintuvo profilis nerastas, pasirinkite iš naujo." #~ msgid "You have entered an illegal input in the printable area section on the first page. Please check before creating it." #~ msgstr "Pirmojo puslapio spausdintinos srities skiltyje įvedėte neleistiną reikšmę. Prieš jį kurdami patikrinkite." #~ msgid "" #~ "The printer preset you created already has a preset with the same name. Do you want to overwrite it?\n" #~ "\tYes: Overwrite the printer preset with the same name, and filament and process presets with the same preset name will be recreated \n" #~ "and filament and process presets without the same preset name will be reserve.\n" #~ "\tCancel: Do not create a preset, return to the creation interface." #~ msgstr "" #~ "Jūsų sukurtame spausdintuvo profilyje jau yra profilis su tokiu pačiu pavadinimu. Ar norite jį perrašyti?\n" #~ "\tTaip: perrašyti to paties pavadinimo spausdintuvo profilį; gijų ir procesų profiliai su tokiais pačiais pavadinimais bus sukurti iš naujo, o profiliai su kitokiais pavadinimais bus išsaugoti.\n" #~ "\tAtšaukti: nekurti profilio ir grįžti į kūrimo sąsają." #~ msgid "Vendor was not found, please reselect." #~ msgstr "Prekės ženklas nerastas, pasirinkite iš naujo." #~ msgid "You have not selected the vendor and model or entered the custom vendor and model." #~ msgstr "Nepasirinkote prekės ženklo bei modelio arba neįvedėte pasirinktinio prekės ženklo bei modelio." #~ msgid "You have not yet selected the printer to replace the nozzle, please choose." #~ msgstr "Dar nepasirinkote spausdintuvo, kuriam norite pakeisti purkštuką, pasirinkite." #~ msgid "" #~ "Please go to filament setting to edit your presets if you need.\n" #~ "Please note that nozzle temperature, hot bed temperature, and maximum volumetric speed has a significant impact on printing quality. Please set them carefully." #~ msgstr "" #~ "Jei reikia, eikite į gijos nustatymus ir redaguokite savo profilius.\n" #~ "Atkreipkite dėmesį, kad purkštuko temperatūra, šildomo pagrindo temperatūra ir maksimalus tūrinis greitis turi didelę įtaką spausdinimo kokybei. Nustatykite juos atsakingai." #, c-format, boost-format #~ msgid "" #~ "The '%s' folder already exists in the current directory. Do you want to clear it and rebuild it.\n" #~ "If not, a time suffix will be added, and you can modify the name after creation." #~ msgstr "" #~ "Dabartiniame kataloge jau yra aplankas „%s“. Ar norite jį išvalyti ir sukurti iš naujo?\n" #~ "Jei ne, bus pridėta laiko priesaga, o pavadinimą galėsite pakeisti jau po sukūrimo." #~ msgid "Only display printer names with changes to printer, filament, and process presets." #~ msgstr "Rodyti tik tuos spausdintuvų pavadinimus, kurių spausdintuvo, gijos ar proceso profiliai buvo pakeisti." #~ msgid "Please select a type you want to export" #~ msgstr "Pasirinkite tipą, kurį norite eksportuoti" #~ msgid "For more information, please check out Wiki" #~ msgstr "Daugiau informacijos rasite Wiki" #~ msgid "Bed Leveling" #~ msgstr "Lyginimas pagal spausdinimo pagrindą" #~ msgid "minute each batch. (It depends on how long it takes to complete the heating.)" #~ msgstr "min. kiekvienai partijai. (Priklauso nuo to, kiek laiko trunka įkaitinimas.)" #~ msgid "" #~ "Speed up your print with Adaptive Layer Height\n" #~ "Did you know that you can print a model even faster, by using the Adaptive Layer Height option? Check it out!" #~ msgstr "" #~ "Paspartinkite spausdinimą naudodami prisitaikantį sluoksnio aukštį\n" #~ "Ar žinojote, kad naudodami prisitaikančio sluoksnio aukščio (Adaptive Layer Height) parinktį modelį galite atspausdinti dar greičiau? Išbandykite!" #~ msgid "" #~ "Different types of supports\n" #~ "Did you know that you can choose from multiple types of supports? Tree supports work great for organic models, while saving filament and improving print speed. Check them out!" #~ msgstr "" #~ "Įvairių tipų atramos\n" #~ "Ar žinojote, kad galite rinktis iš kelių tipų atramų? Medžio formos atramos puikiai tinka organiškiems modeliams, kartu taupydamos giją ir padidindamos spausdinimo greitį. Išbandykite jas!" #~ msgid "" #~ "Printing Silk Filament\n" #~ "Did you know that Silk filament needs special consideration to print it successfully? Higher temperature and lower speed are always recommended for the best results." #~ msgstr "" #~ "Šilko (Silk) gijos spausdinimas\n" #~ "Ar žinojote, kad norint sėkmingai atspausdinti šilko giją, reikalingi specialūs nustatymai? Siekiant geriausių rezultatų, visada rekomenduojama aukštesnė temperatūra ir mažesnis greitis." #~ msgid "" #~ "Flush into support/objects/infill\n" #~ "Did you know that you can reduce wasted filament by flushing it into support/objects/infill during filament change?" #~ msgstr "" #~ "Pravalymas į atramą / objektus / užpildą\n" #~ "Ar žinojote, kad keisdami giją galite sumažinti jos švaistymą, nukreipdami pravalymą (purging) į atramas, objektus arba užpildą?" #~ msgid "" #~ "When do you need to print with the printer door opened?\n" #~ "Did you know that opening the printer door can reduce the probability of extruder/hotend clogging when printing lower temperature filament with a higher enclosure temperature? More info about this in the Wiki." #~ msgstr "" #~ "Kada reikia spausdinti atidarius spausdintuvo dureles?\n" #~ "Ar žinojote, kad atidarius spausdintuvo dureles gali sumažėti ekstruderio / karštosios galvutės (hotend) užsikimšimo tikimybė, kai žemos lydymosi temperatūros gija spausdinama esant aukštai kameros temperatūrai? Daugiau informacijos apie tai rasite „Wiki“ puslapyje."