{
	"type": "process",
	"name": "fdm_process_zero",
	"inherits": "fdm_process_common",
	"from": "system",
	"instantiation": "false",
	"reduce_crossing_wall": "1",
	"max_travel_detour_distance": "10",
	"bottom_surface_pattern": "monotonic",
	"bridge_flow": "1.2",
	"internal_bridge_flow": "1.2",
	"brim_type": "auto_brim",
	"brim_width": "5",
	"brim_object_gap": "0",
	"print_sequence": "by layer",
	"bridge_no_support": "0",
	"draft_shield": "disabled",
	"elefant_foot_compensation": "0.1",
	"enable_arc_fitting": "0",
	"exclude_object": "1",
	"wall_infill_order": "inner wall/outer wall/infill",
	"infill_direction": "45",
	"sparse_infill_pattern": "grid",
	"internal_solid_infill_acceleration": "50%",
	"initial_layer_acceleration": "1000",
	"travel_acceleration": "40000",
	"outer_wall_jerk": "5",
	"inner_wall_jerk": "5",
	"infill_jerk": "5",
	"top_surface_jerk": "5",
	"initial_layer_jerk": "5",
	"travel_jerk": "5",
	"tree_support_wall_count": "0",
	"reduce_infill_retraction": "1",
	"detect_thin_wall": "1",
	"top_surface_pattern": "monotonic",
	"initial_layer_speed": "55",
	"initial_layer_infill_speed": "105",
	"initial_layer_travel_speed": "60%",
	"outer_wall_speed": "350",
	"inner_wall_speed": "400",
	"small_perimeter_speed": "50%",
	"internal_solid_infill_speed": "200",
	"top_surface_speed": "200",
	"gap_infill_speed": "200",
	"sparse_infill_speed": "500",
	"accel_to_decel_enable": "1",
	"accel_to_decel_factor": "25%",
	"travel_speed": "1000",
	"enable_prime_tower": "0",
	"wipe_tower_no_sparse_layers": "0",
	"prime_tower_width": "60",
	"xy_hole_compensation": "0",
	"xy_contour_compensation": "0",
	"bridge_acceleration": "50%",
	"seam_gap": "10%",
	"precise_outer_wall": "1",
	"wall_generator": "classic",
	"gcode_label_objects": "1",
	"slow_down_layers": "3",
	"top_solid_infill_flow_ratio": "0.9",
	"only_one_wall_top": "1",
	"top_bottom_infill_wall_overlap": "25%",
	"filter_out_gap_fill": "0",
	"detect_narrow_internal_solid_infill": "1",
	"thick_bridges": "1",
	"bridge_angle": "0",
	"initial_layer_line_width": "150%",
	"default_acceleration": "40000",
	"compatible_printers": [],
	"internal_bridge_speed": "150",
	"filename_format": "{input_filename_base}_{nozzle_diameter[0]}n_{filament_type[0]}_{layer_height}_{print_time}.gcode"
}