#include "SendToPrinter.hpp"
#include "I18N.hpp"

#include "libslic3r/Utils.hpp"
#include "libslic3r/Thread.hpp"
#include "GUI.hpp"
#include "GUI_App.hpp"
#include "GUI_Preview.hpp"
#include "MainFrame.hpp"
#include "format.hpp"
#include "Widgets/ProgressDialog.hpp"
#include "ReleaseNote.hpp"
#include "Widgets/RoundedRectangle.hpp"
#include "Widgets/StaticBox.hpp"
#include "ConnectPrinter.hpp"
#include "Jobs/BoostThreadWorker.hpp"
#include "Jobs/PlaterWorker.hpp"

#include <wx/progdlg.h>
#include <wx/clipbrd.h>
#include <wx/dcgraph.h>
#include <miniz.h>
#include <algorithm>
#include "BitmapCache.hpp"

#include "DeviceCore/DevManager.h"
#include "DeviceCore/DevStorage.h"
#include "slic3r/Utils/FileTransferUtils.hpp"


namespace Slic3r {
namespace GUI {

#define INITIAL_NUMBER_OF_MACHINES 0
#define LIST_REFRESH_INTERVAL 200
#define MACHINE_LIST_REFRESH_INTERVAL 2000
#define EMMC_STORAGE "emmc"

constexpr int timeout_period = 200000; // ms

wxDEFINE_EVENT(EVT_UPDATE_USER_MACHINE_LIST, wxCommandEvent);
wxDEFINE_EVENT(EVT_PRINT_JOB_CANCEL, wxCommandEvent);
wxDEFINE_EVENT(EVT_SEND_JOB_SUCCESS, wxCommandEvent);
wxDEFINE_EVENT(EVT_CLEAR_IPADDRESS, wxCommandEvent);

static const std::map<int, std::string> error_messages = {
    {SendToPrinterDialog::ERROR_PIPE, L("Reconnecting the printer, the operation cannot be completed immediately, please try again later.")},
    {SendToPrinterDialog::ERROR_RES_BUSY, L("The device cannot handle more conversations. Please retry later.")},
    {SendToPrinterDialog::ERROR_TIME_OUT, L("Timeout, please try again.")},
    {SendToPrinterDialog::FILE_NO_EXIST, L("File does not exist.")},
    {SendToPrinterDialog::FILE_CHECK_ERR, L("File checksum error. Please retry.")},
    {SendToPrinterDialog::FILE_TYPE_ERR, L("Not supported on the current printer version.")},
    {SendToPrinterDialog::STORAGE_UNAVAILABLE, L("Current firmware does not support file transfer to internal storage.")},
    {SendToPrinterDialog::API_VERSION_UNSUPPORT, L("The firmware version of the printer is too low. Please update the firmware and try again.")},
    {SendToPrinterDialog::FILE_EXIST, L("The file already exists, do you want to replace it?")},
    {SendToPrinterDialog::STORAGE_SPACE_NOT_ENOUGH, L("Insufficient storage space, please clear the space and try again.")},
    {SendToPrinterDialog::FILE_CREATE_ERR, L("File creation failed, please try again.")},
    {SendToPrinterDialog::FILE_WRITE_ERR, L("File write failed, please try again.")},
    {SendToPrinterDialog::MD5_COMPARE_ERR, L("MD5 verification failed, please try again.")},
    {SendToPrinterDialog::FILE_RENAME_ERR, L("File renaming failed, please try again.")},
    {SendToPrinterDialog::SEND_ERR, L("File upload failed, please try again.")}
};

static std::string ParseErrorCode(int errorcde)
{
    auto it = error_messages.find(errorcde);
    if (it != error_messages.end()) { return it->second; }
    return "";
}

void SendToPrinterDialog::stripWhiteSpace(std::string& str)
{
    if (str == "") { return; }

    string::iterator cur_it;
    cur_it = str.begin();

    while (cur_it != str.end()) {
        if ((*cur_it) == '\n' || (*cur_it) == ' ') {
            cur_it = str.erase(cur_it);
        }
        else {
            cur_it++;
        }
    }
}

wxString SendToPrinterDialog::format_text(wxString &m_msg)
{

	if (wxGetApp().app_config->get("language") != "zh_CN") { return m_msg; }

	wxString out_txt = m_msg;
	wxString count_txt = "";
	int      new_line_pos = 0;

	for (int i = 0; i < m_msg.length(); i++) {
		auto text_size = m_statictext_printer_msg->GetTextExtent(count_txt);
		if (text_size.x < (FromDIP(400))) {
			count_txt += m_msg[i];
		}
		else {
			out_txt.insert(i - 1, '\n');
			count_txt = "";
		}
	}
	return out_txt;
}

void SendToPrinterDialog::check_focus(wxWindow* window)
{
    if (window == m_rename_input || window == m_rename_input->GetTextCtrl()) {
        on_rename_enter();
    }
}

void SendToPrinterDialog::check_fcous_state(wxWindow* window)
{
    check_focus(window);
    auto children = window->GetChildren();
    for (auto child : children) {
        check_fcous_state(child);
    }
}

void SendToPrinterDialog::on_rename_click(wxCommandEvent& event)
{
    m_is_rename_mode = true;
    m_rename_input->GetTextCtrl()->SetValue(m_current_project_name);
    m_rename_switch_panel->SetSelection(1);
    m_rename_input->GetTextCtrl()->SetFocus();
    m_rename_input->GetTextCtrl()->SetInsertionPointEnd();
}

void SendToPrinterDialog::on_rename_enter()
{
    if (m_is_rename_mode == false) {
        return;
    }
    else {
        m_is_rename_mode = false;
    }

    auto     new_file_name = m_rename_input->GetTextCtrl()->GetValue();

    wxString temp;
    int      num = 0;
    for (auto t : new_file_name) {
        if (t == wxString::FromUTF8("\x20")) {
            num++;
            if (num == 1) temp += t;
        } else {
            num = 0;
            temp += t;
        }
    }
    new_file_name = temp;

    auto     m_valid_type = Valid;
    wxString info_line;

    const char* unusable_symbols = "<>[]:/\\|?*\"";

    const std::string unusable_suffix = PresetCollection::get_suffix_modified(); //"(modified)";
    for (size_t i = 0; i < std::strlen(unusable_symbols); i++) {
        if (new_file_name.find_first_of(unusable_symbols[i]) != std::string::npos) {
            info_line = _L("Name is invalid;") + "\n" + _L("illegal characters:") + " " + unusable_symbols;
            m_valid_type = NoValid;
            break;
        }
    }

    if (m_valid_type == Valid && new_file_name.find(unusable_suffix) != std::string::npos) {
        info_line = _L("Name is invalid;") + "\n" + _L("illegal suffix:") + "\n\t" + from_u8(PresetCollection::get_suffix_modified());
        m_valid_type = NoValid;
    }

    if (m_valid_type == Valid && new_file_name.empty()) {
        info_line = _L("The name is not allowed to be empty.");
        m_valid_type = NoValid;
    }

    if (m_valid_type == Valid && new_file_name.find_first_of(' ') == 0) {
        info_line = _L("The name is not allowed to start with space character.");
        m_valid_type = NoValid;
    }

    if (m_valid_type == Valid && new_file_name.find_last_of(' ') == new_file_name.length() - 1) {
        info_line = _L("The name is not allowed to end with space character.");
        m_valid_type = NoValid;
    }

    if (m_valid_type == Valid && new_file_name.size() >= 100) {
        info_line    = _L("The name length exceeds the limit.");
        m_valid_type = NoValid;
    }

    if (m_valid_type != Valid) {
        MessageDialog msg_wingow(nullptr, info_line, "", wxICON_WARNING | wxOK);
        if (msg_wingow.ShowModal() == wxID_OK) {
            m_rename_switch_panel->SetSelection(0);
            m_rename_text->SetLabel(m_current_project_name);
            m_rename_normal_panel->Layout();
            return;
        }
    }

    m_current_project_name = new_file_name;
    m_rename_switch_panel->SetSelection(0);
    m_rename_text->SetLabel(m_current_project_name);
    m_rename_normal_panel->Layout();
}

SendToPrinterDialog::SendToPrinterDialog(Plater *plater)
    : DPIDialog(static_cast<wxWindow *>(wxGetApp().mainframe), wxID_ANY, _L("Send to Printer storage"), wxDefaultPosition, wxDefaultSize, wxCAPTION | wxCLOSE_BOX)
    , m_plater(plater), m_export_3mf_cancel(false)
{
#ifdef __WINDOWS__
    SetDoubleBuffered(true);
#endif //__WINDOWS__

    // bind
    Bind(wxEVT_CLOSE_WINDOW, &SendToPrinterDialog::on_cancel, this);

    // font
    SetFont(wxGetApp().normal_font());

    Freeze();
    SetBackgroundColour(m_colour_def_color);

    m_sizer_main = new wxBoxSizer(wxVERTICAL);

    m_sizer_main->SetMinSize(wxSize(0, -1));
    m_line_top = new wxPanel(this, wxID_ANY, wxDefaultPosition, wxSize(-1, 1), wxTAB_TRAVERSAL);
    m_line_top->SetBackgroundColour(wxColour(166, 169, 170));

    m_scrollable_region       = new wxPanel(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxTAB_TRAVERSAL);
    m_sizer_scrollable_region = new wxBoxSizer(wxVERTICAL);

    m_panel_image = new wxPanel(m_scrollable_region, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxTAB_TRAVERSAL);
    m_panel_image->SetBackgroundColour(m_colour_def_color);

    sizer_thumbnail = new wxBoxSizer(wxVERTICAL);
    m_thumbnailPanel = new ThumbnailPanel(m_panel_image);
    m_thumbnailPanel->SetSize(wxSize(FromDIP(256), FromDIP(256)));
    m_thumbnailPanel->SetMinSize(wxSize(FromDIP(256), FromDIP(256)));
    m_thumbnailPanel->SetMaxSize(wxSize(FromDIP(256), FromDIP(256)));
    sizer_thumbnail->Add(m_thumbnailPanel, 0, wxEXPAND, 0);
    m_panel_image->SetSizer(sizer_thumbnail);
    m_panel_image->Layout();

    wxBoxSizer *m_sizer_basic        = new wxBoxSizer(wxHORIZONTAL);
    wxBoxSizer *m_sizer_basic_weight = new wxBoxSizer(wxHORIZONTAL);
    wxBoxSizer *m_sizer_basic_time   = new wxBoxSizer(wxHORIZONTAL);

    auto timeimg = new wxStaticBitmap(m_scrollable_region, wxID_ANY, create_scaled_bitmap("print-time", this, 18), wxDefaultPosition, wxSize(FromDIP(18), FromDIP(18)), 0);
    m_sizer_basic_weight->Add(timeimg, 1, wxEXPAND | wxALL, FromDIP(5));
    m_stext_time = new wxStaticText(m_scrollable_region, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, wxALIGN_RIGHT);
    m_sizer_basic_weight->Add(m_stext_time, 0, wxALL, FromDIP(5));
    m_sizer_basic->Add(m_sizer_basic_weight, 0, wxALIGN_CENTER, 0);
    m_sizer_basic->Add(0, 0, 0, wxEXPAND | wxLEFT | wxRIGHT, FromDIP(30));

    auto weightimg = new wxStaticBitmap(m_scrollable_region, wxID_ANY, create_scaled_bitmap("print-weight", this, 18), wxDefaultPosition, wxSize(FromDIP(18), FromDIP(18)), 0);
    m_sizer_basic_time->Add(weightimg, 1, wxEXPAND | wxALL, FromDIP(5));
    m_stext_weight = new wxStaticText(m_scrollable_region, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, wxALIGN_LEFT);
    m_sizer_basic_time->Add(m_stext_weight, 0, wxALL, FromDIP(5));
    m_sizer_basic->Add(m_sizer_basic_time, 0, wxALIGN_CENTER, 0);

    m_line_materia = new wxPanel(this, wxID_ANY, wxDefaultPosition, wxSize(-1, 1), wxTAB_TRAVERSAL);
    m_line_materia->SetForegroundColour(wxColour(238, 238, 238));
    m_line_materia->SetBackgroundColour(wxColour(238, 238, 238));

    wxBoxSizer *m_sizer_printer = new wxBoxSizer(wxHORIZONTAL);

    m_stext_printer_title = new wxStaticText(this, wxID_ANY, _L("Printer"), wxDefaultPosition, wxSize(-1, -1), 0);
    m_stext_printer_title->SetFont(::Label::Head_14);
    m_stext_printer_title->Wrap(-1);
    m_stext_printer_title->SetForegroundColour(m_colour_bold_color);
    m_stext_printer_title->SetBackgroundColour(m_colour_def_color);

    m_sizer_printer->Add(m_stext_printer_title, 0, wxALL | wxLEFT, FromDIP(5));
    m_sizer_printer->Add(0, 0, 0, wxEXPAND | wxLEFT, FromDIP(12));

    m_comboBox_printer = new ::ComboBox(this, wxID_ANY, "", wxDefaultPosition, wxSize(FromDIP(250), -1), 0, nullptr, wxCB_READONLY);
    m_comboBox_printer->Bind(wxEVT_COMBOBOX, &SendToPrinterDialog::on_selection_changed, this);

    m_sizer_printer->Add(m_comboBox_printer, 1, wxEXPAND | wxRIGHT, FromDIP(5));

    m_button_refresh = new Button(this, _L("Refresh"));
    m_button_refresh->SetStyle(ButtonStyle::Confirm, ButtonType::Window);
    m_button_refresh->Bind(wxEVT_BUTTON, &SendToPrinterDialog::on_refresh, this);

    m_sizer_printer->Add(m_button_refresh, 0, wxALL | wxLEFT, FromDIP(5));

    /*select storage*/
    m_storage_panel = new wxPanel(this);
    m_storage_panel->SetBackgroundColour(*wxWHITE);
    m_storage_sizer = new wxBoxSizer(wxHORIZONTAL);
    m_storage_panel->SetSizer(m_storage_sizer);
    m_storage_panel->Layout();

    // try to connect
    m_statictext_printer_msg = new wxStaticText(this, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, wxALIGN_CENTER_HORIZONTAL);
    m_statictext_printer_msg->SetFont(::Label::Body_13);
    m_statictext_printer_msg->SetForegroundColour(*wxBLACK);
    m_statictext_printer_msg->Hide();

    wxBoxSizer *m_sizer_connecting      = new wxBoxSizer(wxHORIZONTAL);
    m_connecting_panel = new wxPanel(this, wxID_ANY, wxDefaultPosition, wxDefaultSize);

    m_connecting_printer_msg = new wxStaticText(m_connecting_panel, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, wxALIGN_CENTER_HORIZONTAL);
    m_connecting_printer_msg->SetFont(::Label::Body_13);
    m_connecting_printer_msg->SetForegroundColour(*wxBLACK);
    m_connecting_printer_msg->SetLabel(_L("Try to connect"));
    /*m_connecting_printer_msg->Hide();*/
    m_connecting_printer_msg->Show();

    std::vector<std::string> list{"ams_rfid_1", "ams_rfid_2", "ams_rfid_3", "ams_rfid_4"};
    m_animaicon = new AnimaIcon(m_connecting_panel, wxID_ANY, list, "refresh_printer", 100);
    m_sizer_connecting->Add(m_connecting_printer_msg, 1, wxALIGN_CENTER_VERTICAL | wxRIGHT, FromDIP(5));
    m_sizer_connecting->Add(m_animaicon, 0, wxALIGN_CENTER_VERTICAL);

    m_connecting_panel->SetSizer(m_sizer_connecting);
    m_connecting_panel->Layout();
    m_connecting_panel->Fit();
    m_connecting_panel->Hide();

    // line schedule
    m_line_schedule = new wxPanel(this, wxID_ANY, wxDefaultPosition, wxSize(-1, 1));
    m_line_schedule->SetBackgroundColour(wxColour(238, 238, 238));
    m_simplebook   = new wxSimplebook(this, wxID_ANY, wxDefaultPosition, SELECT_MACHINE_DIALOG_SIMBOOK_SIZE, 0);

    // perpare mode
    m_panel_prepare = new wxPanel(m_simplebook, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxTAB_TRAVERSAL);
    m_panel_prepare->SetBackgroundColour(m_colour_def_color);
    // m_panel_prepare->SetBackgroundColour(wxColour(135,206,250));
    wxBoxSizer *m_sizer_prepare = new wxBoxSizer(wxVERTICAL);
    wxBoxSizer *m_sizer_pcont   = new wxBoxSizer(wxHORIZONTAL);

    m_sizer_prepare->Add(0, 0, 1, wxTOP, FromDIP(22));
    m_sizer_pcont->Add(0, 0, 1, wxEXPAND, 0);
    m_button_ensure = new Button(m_panel_prepare, _L("Send"));
    m_button_ensure->SetStyle(ButtonStyle::Confirm, ButtonType::Choice);

    m_button_ensure->Bind(wxEVT_BUTTON, &SendToPrinterDialog::on_ok, this);
    m_sizer_pcont->Add(m_button_ensure, 0, wxEXPAND | wxBOTTOM, FromDIP(10));
    m_sizer_prepare->Add(m_sizer_pcont, 0, wxEXPAND, 0);
    m_panel_prepare->SetSizer(m_sizer_prepare);
    m_panel_prepare->Layout();
    m_simplebook->AddPage(m_panel_prepare, wxEmptyString, true);

    // sending mode
    m_status_bar    = std::make_shared<BBLStatusBarSend>(m_simplebook);
    m_panel_sending = m_status_bar->get_panel();
    m_simplebook->AddPage(m_panel_sending, wxEmptyString, false);
    
    m_worker = std::make_unique<PlaterWorker<BoostThreadWorker>>(this, m_status_bar, "send_worker");

    // finish mode
    m_panel_finish = new wxPanel(m_simplebook, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxTAB_TRAVERSAL);
    m_panel_finish->SetBackgroundColour(wxColour(135, 206, 250));
    wxBoxSizer *m_sizer_finish   = new wxBoxSizer(wxHORIZONTAL);
    wxBoxSizer *m_sizer_finish_v = new wxBoxSizer(wxVERTICAL);
    wxBoxSizer *m_sizer_finish_h = new wxBoxSizer(wxHORIZONTAL);

    auto imgsize      = FromDIP(25);
    auto completedimg = new wxStaticBitmap(m_panel_finish, wxID_ANY, create_scaled_bitmap("completed", m_panel_finish, 25), wxDefaultPosition, wxSize(imgsize, imgsize), 0);
    m_sizer_finish_h->Add(completedimg, 0, wxALIGN_CENTER | wxALL, FromDIP(5));

    m_statictext_finish = new wxStaticText(m_panel_finish, wxID_ANY, L("send completed"), wxDefaultPosition, wxDefaultSize, 0);
    m_statictext_finish->Wrap(-1);
    m_statictext_finish->SetForegroundColour(wxColour(0, 150, 136));
    m_sizer_finish_h->Add(m_statictext_finish, 0, wxALIGN_CENTER | wxALL, FromDIP(5));

    m_sizer_finish_v->Add(m_sizer_finish_h, 1, wxALIGN_CENTER, 0);

    m_sizer_finish->Add(m_sizer_finish_v, 1, wxALIGN_CENTER, 0);

    m_panel_finish->SetSizer(m_sizer_finish);
    m_panel_finish->Layout();
    m_sizer_finish->Fit(m_panel_finish);
    m_simplebook->AddPage(m_panel_finish, wxEmptyString, false);

    //show bind failed info
    m_sw_print_failed_info = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxSize(FromDIP(380), FromDIP(125)), wxVSCROLL);
    m_sw_print_failed_info->SetBackgroundColour(*wxWHITE);
    m_sw_print_failed_info->SetScrollRate(0, 5);
    m_sw_print_failed_info->SetMinSize(wxSize(FromDIP(380), FromDIP(125)));
    m_sw_print_failed_info->SetMaxSize(wxSize(FromDIP(380), FromDIP(125)));

    wxBoxSizer* sizer_print_failed_info = new wxBoxSizer(wxVERTICAL);
    m_sw_print_failed_info->SetSizer(sizer_print_failed_info);

    wxBoxSizer* sizer_error_code = new wxBoxSizer(wxHORIZONTAL);
    wxBoxSizer* sizer_error_desc = new wxBoxSizer(wxHORIZONTAL);
    wxBoxSizer* sizer_extra_info = new wxBoxSizer(wxHORIZONTAL);

    auto st_title_error_code = new wxStaticText(m_sw_print_failed_info, wxID_ANY, _L("Error code"));
    auto st_title_error_code_doc = new wxStaticText(m_sw_print_failed_info, wxID_ANY, ": ");
    m_st_txt_error_code = new Label(m_sw_print_failed_info, wxEmptyString);
    st_title_error_code->SetForegroundColour(0x909090);
    st_title_error_code_doc->SetForegroundColour(0x909090);
    m_st_txt_error_code->SetForegroundColour(0x909090);
    st_title_error_code->SetFont(::Label::Body_13);
    st_title_error_code_doc->SetFont(::Label::Body_13);
    m_st_txt_error_code->SetFont(::Label::Body_13);
    st_title_error_code->SetMinSize(wxSize(FromDIP(74), -1));
    st_title_error_code->SetMaxSize(wxSize(FromDIP(74), -1));
    m_st_txt_error_code->SetMinSize(wxSize(FromDIP(260), -1));
    m_st_txt_error_code->SetMaxSize(wxSize(FromDIP(260), -1));
    sizer_error_code->Add(st_title_error_code, 0, wxALL, 0);
    sizer_error_code->Add(st_title_error_code_doc, 0, wxALL, 0);
    sizer_error_code->Add(m_st_txt_error_code, 0, wxALL, 0);

    auto st_title_error_desc = new wxStaticText(m_sw_print_failed_info, wxID_ANY, wxT("Error desc"));
    auto st_title_error_desc_doc = new wxStaticText(m_sw_print_failed_info, wxID_ANY, ": ");
    m_st_txt_error_desc = new Label(m_sw_print_failed_info, wxEmptyString);
    st_title_error_desc->SetForegroundColour(0x909090);
    st_title_error_desc_doc->SetForegroundColour(0x909090);
    m_st_txt_error_desc->SetForegroundColour(0x909090);
    st_title_error_desc->SetFont(::Label::Body_13);
    st_title_error_desc_doc->SetFont(::Label::Body_13);
    m_st_txt_error_desc->SetFont(::Label::Body_13);
    st_title_error_desc->SetMinSize(wxSize(FromDIP(74), -1));
    st_title_error_desc->SetMaxSize(wxSize(FromDIP(74), -1));
    m_st_txt_error_desc->SetMinSize(wxSize(FromDIP(260), -1));
    m_st_txt_error_desc->SetMaxSize(wxSize(FromDIP(260), -1));
    sizer_error_desc->Add(st_title_error_desc, 0, wxALL, 0);
    sizer_error_desc->Add(st_title_error_desc_doc, 0, wxALL, 0);
    sizer_error_desc->Add(m_st_txt_error_desc, 0, wxALL, 0);

    auto st_title_extra_info = new wxStaticText(m_sw_print_failed_info, wxID_ANY, wxT("Extra info"));
    auto st_title_extra_info_doc = new wxStaticText(m_sw_print_failed_info, wxID_ANY, ": ");
    m_st_txt_extra_info = new Label(m_sw_print_failed_info, wxEmptyString);
    st_title_extra_info->SetForegroundColour(0x909090);
    st_title_extra_info_doc->SetForegroundColour(0x909090);
    m_st_txt_extra_info->SetForegroundColour(0x909090);
    st_title_extra_info->SetFont(::Label::Body_13);
    st_title_extra_info_doc->SetFont(::Label::Body_13);
    m_st_txt_extra_info->SetFont(::Label::Body_13);
    st_title_extra_info->SetMinSize(wxSize(FromDIP(74), -1));
    st_title_extra_info->SetMaxSize(wxSize(FromDIP(74), -1));
    m_st_txt_extra_info->SetMinSize(wxSize(FromDIP(260), -1));
    m_st_txt_extra_info->SetMaxSize(wxSize(FromDIP(260), -1));
    sizer_extra_info->Add(st_title_extra_info, 0, wxALL, 0);
    sizer_extra_info->Add(st_title_extra_info_doc, 0, wxALL, 0);
    sizer_extra_info->Add(m_st_txt_extra_info, 0, wxALL, 0);

    // ORCA standardized HyperLink
    m_link_network_state = new HyperLink(m_sw_print_failed_info, _L("Check the status of current system services"), wxGetApp().link_to_network_check());
    m_link_network_state->SetFont(::Label::Body_12);

    sizer_print_failed_info->Add(m_link_network_state, 0, wxLEFT, 5);
    sizer_print_failed_info->Add(sizer_error_code, 0, wxLEFT, 5);
    sizer_print_failed_info->Add(0, 0, 0, wxTOP, FromDIP(3));
    sizer_print_failed_info->Add(sizer_error_desc, 0, wxLEFT, 5);
    sizer_print_failed_info->Add(0, 0, 0, wxTOP, FromDIP(3));
    sizer_print_failed_info->Add(sizer_extra_info, 0, wxLEFT, 5);

    // bind
    Bind(EVT_SHOW_ERROR_INFO_SEND, [this](auto& e) {
        show_print_failed_info(true);
    });

    // bind
    Bind(EVT_UPDATE_USER_MACHINE_LIST, &SendToPrinterDialog::update_printer_combobox, this);
    Bind(EVT_PRINT_JOB_CANCEL, &SendToPrinterDialog::on_print_job_cancel, this);


    m_sizer_scrollable_region->Add(m_panel_image, 0, wxALIGN_CENTER_HORIZONTAL, 0);
    m_sizer_scrollable_region->Add(0, 0, 0, wxTOP, FromDIP(10));
    m_sizer_scrollable_region->Add(m_sizer_basic, 0, wxALIGN_CENTER_HORIZONTAL, 0);
	m_scrollable_region->SetSizer(m_sizer_scrollable_region);
	m_scrollable_region->Layout();

    //file name
    //rename normal
    m_rename_switch_panel = new wxSimplebook(this);
    m_rename_switch_panel->SetSize(wxSize(FromDIP(420), FromDIP(25)));
    m_rename_switch_panel->SetMinSize(wxSize(FromDIP(420), FromDIP(25)));
    m_rename_switch_panel->SetMaxSize(wxSize(FromDIP(420), FromDIP(25)));

    m_rename_normal_panel = new wxPanel(m_rename_switch_panel, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxTAB_TRAVERSAL);
    m_rename_normal_panel->SetBackgroundColour(*wxWHITE);
    rename_sizer_v = new wxBoxSizer(wxVERTICAL);
    rename_sizer_h = new wxBoxSizer(wxHORIZONTAL);

    m_rename_text = new wxStaticText(m_rename_normal_panel, wxID_ANY, wxT("MyLabel"), wxDefaultPosition, wxDefaultSize, wxST_ELLIPSIZE_END);
    m_rename_text->SetForegroundColour(*wxBLACK);
    m_rename_text->SetFont(::Label::Body_13);
    m_rename_text->SetMaxSize(wxSize(FromDIP(390), -1));
    m_rename_button = new Button(m_rename_normal_panel, "", "rename_edit", wxBORDER_NONE, FromDIP(13)); // ORCA Match edit icon and its size
    m_rename_button->SetBackgroundColor(*wxWHITE);
    m_rename_button->SetBackgroundColour(*wxWHITE);

    rename_sizer_h->Add(m_rename_text, 0, wxALIGN_CENTER, 0);
    rename_sizer_h->Add(m_rename_button, 0, wxALIGN_CENTER, 0);
    rename_sizer_v->Add(rename_sizer_h, 1, wxALIGN_CENTER, 0);
    m_rename_normal_panel->SetSizer(rename_sizer_v);
    m_rename_normal_panel->Layout();
    rename_sizer_v->Fit(m_rename_normal_panel);

    //rename edit
    auto m_rename_edit_panel = new wxPanel(m_rename_switch_panel, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxTAB_TRAVERSAL);
    m_rename_edit_panel->SetBackgroundColour(*wxWHITE);
    auto rename_edit_sizer_v = new wxBoxSizer(wxVERTICAL);

    m_rename_input = new ::TextInput(m_rename_edit_panel, wxEmptyString, wxEmptyString, wxEmptyString, wxDefaultPosition, wxDefaultSize, wxTE_PROCESS_ENTER);
    m_rename_input->GetTextCtrl()->SetFont(::Label::Body_13);
    m_rename_input->SetSize(wxSize(FromDIP(380), FromDIP(24)));
    m_rename_input->SetMinSize(wxSize(FromDIP(380), FromDIP(24)));
    m_rename_input->SetMaxSize(wxSize(FromDIP(380), FromDIP(24)));
    m_rename_input->Bind(wxEVT_TEXT_ENTER, [this](auto& e) {on_rename_enter();});
    m_rename_input->Bind(wxEVT_KILL_FOCUS, [this](auto& e) {
        if (!m_rename_input->HasFocus() && !m_rename_text->HasFocus())
            on_rename_enter();
        else
            e.Skip(); });
    rename_edit_sizer_v->Add(m_rename_input, 1, wxALIGN_CENTER, 0);


    m_rename_edit_panel->SetSizer(rename_edit_sizer_v);
    m_rename_edit_panel->Layout();
    rename_edit_sizer_v->Fit(m_rename_edit_panel);

    m_rename_button->Bind(wxEVT_BUTTON, &SendToPrinterDialog::on_rename_click, this);
    m_rename_switch_panel->AddPage(m_rename_normal_panel, wxEmptyString, true);
    m_rename_switch_panel->AddPage(m_rename_edit_panel, wxEmptyString, false);

    Bind(wxEVT_CHAR_HOOK, [this](wxKeyEvent& e) {
        if (e.GetKeyCode() == WXK_ESCAPE) {
            if (m_rename_switch_panel->GetSelection() == 0) {
                e.Skip();
            }
            else {
                m_rename_switch_panel->SetSelection(0);
                m_rename_text->SetLabel(m_current_project_name);
                m_rename_normal_panel->Layout();
            }
        }
        else {
            e.Skip();
        }
        });

    m_panel_prepare->Bind(wxEVT_LEFT_DOWN, [this](auto& e) {
        check_fcous_state(this);
        e.Skip();
        });

    m_scrollable_region->Bind(wxEVT_LEFT_DOWN, [this](auto& e) {
        check_fcous_state(this);
        e.Skip();
        });

    Bind(wxEVT_LEFT_DOWN, [this](auto& e) {
        check_fcous_state(this);
        e.Skip();
        });

    m_sizer_main->Add(m_line_top, 0, wxEXPAND, 0);
    m_sizer_main->Add(0, 0, 0, wxTOP, FromDIP(10));
    m_sizer_main->Add(m_scrollable_region, 0, wxALIGN_CENTER_HORIZONTAL, 0);
    m_sizer_main->Add(0, 0, 0, wxEXPAND | wxTOP, FromDIP(6));
    m_sizer_main->Add(m_rename_switch_panel, 0, wxALIGN_CENTER_HORIZONTAL, 0);
    m_sizer_main->Add(0, 0, 0, wxEXPAND | wxTOP, FromDIP(6));
    m_sizer_main->Add(m_line_materia, 0, wxEXPAND | wxLEFT | wxRIGHT, FromDIP(30));
    m_sizer_main->Add(0, 0, 0, wxEXPAND | wxTOP, FromDIP(12));
    m_sizer_main->Add(m_sizer_printer, 0, wxEXPAND | wxLEFT | wxRIGHT, FromDIP(30));
    m_sizer_main->Add(m_storage_panel, 0, wxALIGN_CENTER_HORIZONTAL | wxTOP , FromDIP(8));
    m_sizer_main->Add(0, 0, 0, wxEXPAND | wxTOP, FromDIP(11));
    m_sizer_main->Add(m_statictext_printer_msg, 0, wxALIGN_CENTER_HORIZONTAL, 0);
    m_sizer_main->Add(m_connecting_panel, 0, wxALIGN_CENTER_HORIZONTAL, 0);
    m_sizer_main->Add(0, 1, 0, wxTOP, FromDIP(22));
    m_sizer_main->Add(m_line_schedule, 0, wxEXPAND | wxLEFT | wxRIGHT, FromDIP(30));
    m_sizer_main->Add(m_simplebook, 0, wxALIGN_CENTER_HORIZONTAL, 0);
    m_sizer_main->Add(m_sw_print_failed_info, 0, wxALIGN_CENTER, 0);
    m_sizer_main->Add(0, 0, 0, wxEXPAND | wxTOP, FromDIP(13));

     m_last_refresh_time = wxDateTime::Now();
    show_print_failed_info(false);
    SetSizer(m_sizer_main);
    Layout();
    Fit();
    Thaw();

    init_bind();
    init_timer();
    // CenterOnParent();
    Centre(wxBOTH);
    wxGetApp().UpdateDlgDarkUI(this);
}

std::string SendToPrinterDialog::get_storage_selected()
{
    if (!m_selected_storage.empty())
        return m_selected_storage;

    for (const auto& radio : m_storage_radioBox) {
        if (radio->GetValue()) {
            return radio->GetLabel().ToStdString();
        }
    }
    return "";
}

void SendToPrinterDialog::update_storage_list(const std::vector<std::string> &storages)
{
    m_storage_sizer->Clear();
    m_storage_radioBox.clear();
    m_storage_panel->DestroyChildren();

    for (int i=0; i < storages.size(); i++) {
        RadioBox* radiobox = new RadioBox(m_storage_panel);
        Label    *storage_text = new Label(m_storage_panel);

        if (storages[i] == "emmc")
        {
            storage_text->SetLabel(_L("Internal Storage"));
            storage_text->SetForegroundColour(StateColor::darkModeColorFor(wxColour("#000000")));
        }
        else
        {
            storage_text->SetLabel(_L("External Storage"));
            storage_text->SetForegroundColour(StateColor::darkModeColorFor(wxColour("#000000")));
        }


        //radiobox->SetLabel(storages[i]);
        if (storages[i] != "emmc" && m_if_has_sdcard == false)
        {
            storage_text->SetLabel(_L("External Storage"));
            radiobox->Disable();
            storage_text->SetForegroundColour(StateColor::darkModeColorFor(wxColour("#CECECE")));
        }
        else
        {
            radiobox->Enable();
        }
        radiobox->Bind(wxEVT_LEFT_DOWN, [this, radiobox, selectd_storage = storages[i]](auto& e) {
            for (const auto& radio : m_storage_radioBox) {
                radio->SetValue(false);
            }
            radiobox->SetValue(true);
            m_selected_storage = selectd_storage;
        });

        m_storage_sizer->Add(radiobox, 0, wxALIGN_CENTER, 0);
        m_storage_sizer->Add(0, 0, 0, wxEXPAND|wxLEFT, FromDIP(6));
        m_storage_sizer->Add(storage_text, 0, wxALIGN_CENTER,0);
        m_storage_sizer->AddSpacer(20);
        m_storage_radioBox.push_back(radiobox);
    }

    if (m_storage_radioBox.size() > 0) {
        m_storage_sizer->Add(0, 0, 0, wxEXPAND, FromDIP(6));
        auto radio = m_storage_radioBox.front();
        radio->SetValue(true);
        if (storages.size() > 0)
           m_selected_storage = storages[0];
    }

    m_storage_panel->Layout();
    m_storage_panel->Fit();
    Layout();
    Fit();
}
void SendToPrinterDialog::update_print_error_info(int code, std::string msg, std::string extra)
{
    m_print_error_code = code;
    m_print_error_msg = msg;
    m_print_error_extra = extra;
}

void SendToPrinterDialog::show_print_failed_info(bool show, int code, wxString description, wxString extra)
{
    if (show) {
        if (!m_sw_print_failed_info->IsShown()) {
            m_sw_print_failed_info->Show(true);

            m_st_txt_error_code->SetLabelText(wxString::Format("%d", m_print_error_code));
            m_st_txt_error_desc->SetLabelText( wxGetApp().filter_string(m_print_error_msg));
            m_st_txt_extra_info->SetLabelText( wxGetApp().filter_string(m_print_error_extra));

            m_st_txt_error_code->Wrap(FromDIP(260));
            m_st_txt_error_desc->Wrap(FromDIP(260));
            m_st_txt_extra_info->Wrap(FromDIP(260));
        }
        else {
            m_sw_print_failed_info->Show(false);
        }
        Layout();
        Fit();
    }
    else {
        if (!m_sw_print_failed_info->IsShown()) { return; }
        m_sw_print_failed_info->Show(false);
        m_st_txt_error_code->SetLabelText(wxEmptyString);
        m_st_txt_error_desc->SetLabelText(wxEmptyString);
        m_st_txt_extra_info->SetLabelText(wxEmptyString);
        Layout();
        Fit();
    }
}

void SendToPrinterDialog::prepare_mode()
{
    m_is_in_sending_mode = false;
    m_comboBox_printer->Enable();
    m_worker->wait_for_idle();

    if (wxIsBusy())
        wxEndBusyCursor();
    Enable_Send_Button(true);
    show_print_failed_info(false);

    m_status_bar->reset();
    if (m_simplebook->GetSelection() != 0) {
        m_simplebook->SetSelection(0);
    }
}

void SendToPrinterDialog::sending_mode()
{
    m_is_in_sending_mode = true;
    m_comboBox_printer->Disable();
    if (m_simplebook->GetSelection() != 1){
        m_simplebook->SetSelection(1);
        Layout();
        Fit();
    }
}

void SendToPrinterDialog::prepare(int print_plate_idx)
{
    m_print_plate_idx = print_plate_idx;
}

void SendToPrinterDialog::update_priner_status_msg(wxString msg, bool is_warning)
{
    auto colour = is_warning ? wxColour(0xFF, 0x6F, 0x00) : wxColour(0x6B, 0x6B, 0x6B);
    m_statictext_printer_msg->SetForegroundColour(colour);

    if (msg.empty()) {
        if (!m_statictext_printer_msg->GetLabel().empty()) {
            m_statictext_printer_msg->SetLabel(wxEmptyString);
            m_statictext_printer_msg->Hide();
            Layout();
            Fit();
        }
    } else {
        msg          = format_text(msg);

        auto str_new = msg.ToStdString();
        stripWhiteSpace(str_new);

        auto str_old = m_statictext_printer_msg->GetLabel().ToStdString();
        stripWhiteSpace(str_old);

        if (str_new != str_old) {
            if (m_statictext_printer_msg->GetLabel() != msg) {
                m_statictext_printer_msg->SetLabel(msg);
                m_statictext_printer_msg->SetMinSize(wxSize(FromDIP(400), -1));
                m_statictext_printer_msg->SetMaxSize(wxSize(FromDIP(400), -1));
                m_statictext_printer_msg->Wrap(FromDIP(400));
                m_statictext_printer_msg->Show();
                Layout();
                Fit();
            }
        }
    }
}

void SendToPrinterDialog::update_print_status_msg(wxString msg, bool is_warning, bool is_printer_msg)
{
    if (is_printer_msg) {
        update_priner_status_msg(msg, is_warning);
    } else {
        update_priner_status_msg(wxEmptyString, false);
    }
}


void SendToPrinterDialog::init_bind()
{
    Bind(wxEVT_TIMER, &SendToPrinterDialog::on_timer, this);
    Bind(EVT_CLEAR_IPADDRESS, &SendToPrinterDialog::clear_ip_address_config, this);
}

void SendToPrinterDialog::init_timer()
{
    m_refresh_timer = new wxTimer();
    m_refresh_timer->SetOwner(this);
}

void SendToPrinterDialog::on_cancel(wxCloseEvent &event)
{
    m_worker->cancel_all();

    if (m_task_timer && m_task_timer->IsRunning()) {
        m_task_timer->Stop();
        m_task_timer.reset();
    }

    Reset();
    this->EndModal(wxID_CANCEL);
}

void SendToPrinterDialog::on_ok(wxCommandEvent &event)
{
    BOOST_LOG_TRIVIAL(info) << "print_job: on_ok to send !";
    m_is_canceled = false;
    Enable_Send_Button(false);
    if (m_is_in_sending_mode)
        return;

    int result = 0;
    if (m_printer_last_select.empty()) {
        return;
    }

    DeviceManager *dev = Slic3r::GUI::wxGetApp().getDeviceManager();
    if (!dev) return;

    MachineObject *obj_ = dev->get_selected_machine();

    if (obj_ == nullptr) {
        m_printer_last_select = "";
        m_comboBox_printer->SetTextLabel("");
        return;
    }
    assert(obj_->get_dev_id() == m_printer_last_select);

    BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << ", print_job: for send task, current printer id =  " << m_printer_last_select << std::endl;
    show_status(PrintDialogStatus::PrintStatusSending);

    m_status_bar->reset();
    m_status_bar->set_prog_block();
    m_status_bar->set_cancel_callback_fina([this]() {
        BOOST_LOG_TRIVIAL(info) << "print_job: enter canceled";
        m_worker->cancel_all();

        if (m_task_timer && m_task_timer->IsRunning()) {
            m_task_timer->Stop();
            m_task_timer.reset();
        }

        if (m_filetransfer_uploadfile_job) {
            m_filetransfer_uploadfile_job->cancel();
            m_filetransfer_uploadfile_job.reset();
            m_filetransfer_uploadfile_job = nullptr;
        }

        m_is_canceled = true;
        wxCommandEvent* event = new wxCommandEvent(EVT_PRINT_JOB_CANCEL);
        wxQueueEvent(this, event);
    });

    if (m_is_canceled) {
        BOOST_LOG_TRIVIAL(info) << "send_job: m_is_canceled";
        //m_status_bar->set_status_text(task_canceled_text);
        return;
    }

    // enter sending mode
    sending_mode();

    if (wxGetApp().plater()->using_exported_file()) {
        m_plater->set_print_job_plate_idx(m_print_plate_idx);
        result = 0;
    }
     else {
         result = m_plater->send_gcode(m_print_plate_idx, [this](int export_stage, int current, int total, bool &cancel) {
             if (this->m_is_canceled) return;
             bool     cancelled = false;
             wxString msg       = _L("Preparing print job");
             m_status_bar->update_status(msg, cancelled, 10, true);
             m_export_3mf_cancel = cancel = cancelled;
         });
     }

    if (m_is_canceled || m_export_3mf_cancel) {
        BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << ": send progress 10";
        BOOST_LOG_TRIVIAL(info) << "send_job: m_export_3mf_cancel or m_is_canceled";
        //m_status_bar->set_status_text(task_canceled_text);
        return;
    }

    if (result < 0) {
        BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << ": Abnormal print file data. Please slice again";
        wxString msg = _L("Abnormal print file data. Please slice again");
        m_status_bar->set_status_text(msg);
        return;
    }

    // export config 3mf if needed
    if(!wxGetApp().plater()->using_exported_file() && !obj_->is_lan_mode_printer()) {
            result = m_plater->export_config_3mf(m_print_plate_idx);
            if (result < 0) {
                BOOST_LOG_TRIVIAL(info) << "export_config_3mf failed, result = " << result;
                return;
            }
        }


    if (m_is_canceled || m_export_3mf_cancel) {
        BOOST_LOG_TRIVIAL(info) << "send_job: m_export_3mf_cancel or m_is_canceled";
        //m_status_bar->set_status_text(task_canceled_text);
        return;
    }

   /* std::string  file_name       = "";
	auto default_output_file    = wxGetApp().plater()->get_export_gcode_filename(".3mf");
    if (!default_output_file.empty()) {
		fs::path default_output_file_path = boost::filesystem::path(default_output_file.c_str());
		file_name = default_output_file_path.filename().string();
    }*/

    if (obj_->is_support_brtc && (m_tcp_try_connect || m_tutk_try_connect))
    {
        update_print_status_msg(wxEmptyString, false, false);

        PrintPrepareData print_data;

        m_plater->get_print_job_data(&print_data);
        std::string project_name = m_current_project_name.utf8_string() + ".gcode.3mf";

        std::string _3mf_path;
        if (wxGetApp().plater()->using_exported_file())
            _3mf_path = wxGetApp().plater()->get_3mf_filename();
        else
             _3mf_path = print_data._3mf_path.string();

        CreateUploadFileJob(_3mf_path, project_name);

        // time out
        if (m_task_timer && m_task_timer->IsRunning()) m_task_timer->Stop();

        m_task_timer.reset(new wxTimer());
        m_task_timer->SetOwner(this);

        this->Bind(wxEVT_TIMER, [this](auto e){
                show_status(PrintDialogStatus::PrintStatusPublicUploadFiled);
                m_filetransfer_uploadfile_job->cancel();
                update_print_status_msg(_L("Upload file timeout, please check if the firmware version supports it."), false, true);
        },m_task_timer->GetId());
        m_task_timer->StartOnce(timeout_period);
    }
    else
    {
        auto m_send_job           = std::make_unique<SendJob>(m_printer_last_select);
        m_send_job->m_dev_ip      = obj_->get_dev_ip();
        m_send_job->m_access_code = obj_->get_access_code();


        BOOST_LOG_TRIVIAL(info) << "send_job: use ftp send job";


#if !BBL_RELEASE_TO_PUBLIC
        m_send_job->m_local_use_ssl_for_ftp  = wxGetApp().app_config->get("enable_ssl_for_ftp") == "true" ? true : false;
        m_send_job->m_local_use_ssl = wxGetApp().app_config->get("enable_ssl_for_mqtt") == "true" ? true : false;
#else
        m_send_job->m_local_use_ssl_for_ftp  = obj_->local_use_ssl_for_ftp;
        m_send_job->m_local_use_ssl = obj_->local_use_ssl;

#endif
        m_send_job->connection_type     = obj_->connection_type();
        m_send_job->cloud_print_only    = true;
        m_send_job->sdcard_state = obj_->GetStorage()->get_sdcard_state();
        m_send_job->has_sdcard = wxGetApp().app_config->get("allow_abnormal_storage") == "true"
            ? (m_send_job->sdcard_state == DevStorage::SdcardState::HAS_SDCARD_NORMAL
               || m_send_job->sdcard_state == DevStorage::SdcardState::HAS_SDCARD_ABNORMAL)
            : m_send_job->sdcard_state == DevStorage::SdcardState::HAS_SDCARD_NORMAL;
        m_send_job->set_project_name(m_current_project_name.utf8_string());

        enable_prepare_mode = false;

        m_send_job->on_check_ip_address_fail([this, token = std::weak_ptr(m_token)](int result) {
             CallAfter([token, this] {
                if (token.expired()) { return; }
                if (this) {
                    SendFailedConfirm sfcDlg;
                    auto res = sfcDlg.ShowModal();
                    m_status_bar->cancel();

                    if (res == wxYES) {
                        wxQueueEvent(m_button_ensure, new wxCommandEvent(wxEVT_BUTTON));
                    } else if (res == wxAPPLY) {
                        wxCommandEvent *evt = new wxCommandEvent(EVT_CLEAR_IPADDRESS);
                        wxQueueEvent(this, evt);
                        wxGetApp().show_ip_address_enter_dialog();
                    }
                }
            });
        });

        if (obj_->is_lan_mode_printer()) {
            m_send_job->set_check_mode();
            m_send_job->check_and_continue();
        }
        replace_job(*m_worker, std::move(m_send_job));
    }

    BOOST_LOG_TRIVIAL(info) << "send_job: send print job";
}

void SendToPrinterDialog::clear_ip_address_config(wxCommandEvent& e)
{
    enable_prepare_mode = true;
    prepare_mode();
}

void SendToPrinterDialog::update_user_machine_list()
{
    NetworkAgent* m_agent = wxGetApp().getAgent();
    if (m_agent && m_agent->is_user_login()) {
        boost::thread get_print_info_thread = Slic3r::create_thread([this, token = std::weak_ptr<int>(m_token)] {
            NetworkAgent* agent = wxGetApp().getAgent();
            unsigned int http_code;
            std::string body;
            int result = agent->get_user_print_info(&http_code, &body);
            CallAfter([token, this, result, body] {
                if (token.expired()) {return;}
                if (result == 0) {
                    m_print_info = body;
                }
                else {
                    m_print_info = "";
                }
                wxCommandEvent event(EVT_UPDATE_USER_MACHINE_LIST);
                event.SetEventObject(this);
                wxPostEvent(this, event);
            });
        });
    } else {
        wxCommandEvent event(EVT_UPDATE_USER_MACHINE_LIST);
        event.SetEventObject(this);
        wxPostEvent(this, event);
    }
}

void SendToPrinterDialog::on_refresh(wxCommandEvent &event)
{
    wxDateTime now     = wxDateTime::Now();
    wxTimeSpan elapsed = now - m_last_refresh_time;

    if (elapsed.GetMilliseconds() < 500) return;

    m_last_refresh_time = now;

    BOOST_LOG_TRIVIAL(info) << "m_printer_last_select: on_refresh";
    show_status(PrintDialogStatus::PrintStatusRefreshingMachineList);
    update_user_machine_list();
}

void SendToPrinterDialog::on_print_job_cancel(wxCommandEvent &evt)
{
    BOOST_LOG_TRIVIAL(info) << "print_job: canceled";
    show_status(PrintDialogStatus::PrintStatusSendingCanceled);
    // enter prepare mode
    prepare_mode();
}

std::vector<std::string> SendToPrinterDialog::sort_string(std::vector<std::string> strArray)
{
    std::vector<std::string> outputArray;
    std::sort(strArray.begin(), strArray.end());
    std::vector<std::string>::iterator st;
    for (st = strArray.begin(); st != strArray.end(); st++) { outputArray.push_back(*st); }

    return outputArray;
}


bool  SendToPrinterDialog::is_timeout()
{
    if (timeout_count > 15 * 1000 / LIST_REFRESH_INTERVAL) {
        return true;
    }
    return false;
}

void  SendToPrinterDialog::reset_timeout()
{
    timeout_count = 0;
}

void SendToPrinterDialog::update_user_printer()
{
    Slic3r::DeviceManager* dev = Slic3r::GUI::wxGetApp().getDeviceManager();
    if (!dev) return;

    // update user print info
    if (!m_print_info.empty()) {
        dev->parse_user_print_info(m_print_info);
        m_print_info = "";
    }

    // clear machine list
    m_list.clear();
    m_comboBox_printer->Clear();
    std::vector<std::string>              machine_list;
    wxArrayString                         machine_list_name;
    std::map<std::string, MachineObject*> option_list;

    option_list = dev->get_my_machine_list();

    // same machine only appear once
    for (auto it = option_list.begin(); it != option_list.end(); it++) {
        if (it->second && (it->second->is_online() || it->second->is_connected())) {
            machine_list.push_back(it->second->get_dev_name());
        }
    }
    machine_list = sort_string(machine_list);
    for (auto tt = machine_list.begin(); tt != machine_list.end(); tt++) {
        for (auto it = option_list.begin(); it != option_list.end(); it++) {
            if (it->second->get_dev_name() == *tt) {
                m_list.push_back(it->second);
                wxString dev_name_text = from_u8(it->second->get_dev_name());
                if (it->second->is_lan_mode_printer()) {
                    dev_name_text += "(LAN)";
                }
                machine_list_name.Add(dev_name_text);
                break;
            }
        }
    }

    m_comboBox_printer->Set(machine_list_name);

    MachineObject* obj = dev->get_selected_machine();
    if (!obj) {
        dev->load_last_machine();
        obj = dev->get_selected_machine();
    }

    if (obj) {
        m_printer_last_select = obj->get_dev_id();
    } else {
        m_printer_last_select = "";
    }

    if (m_list.size() > 0) {
        // select a default machine
        if (m_printer_last_select.empty()) {
            m_printer_last_select = m_list[0]->get_dev_id();
            m_comboBox_printer->SetSelection(0);
            wxCommandEvent event(wxEVT_COMBOBOX);
            event.SetEventObject(m_comboBox_printer);
            wxPostEvent(m_comboBox_printer, event);
        }
        for (auto i = 0; i < m_list.size(); i++) {
            if (m_list[i]->get_dev_id() == m_printer_last_select) {
                m_comboBox_printer->SetSelection(i);
                wxCommandEvent event(wxEVT_COMBOBOX);
                event.SetEventObject(m_comboBox_printer);
                wxPostEvent(m_comboBox_printer, event);
            }
        }
    }
    else {
        m_printer_last_select = "";
        m_comboBox_printer->SetTextLabel("");
    }

    BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << "for send task, current printer id =  " << m_printer_last_select << std::endl;
}

void SendToPrinterDialog::update_printer_combobox(wxCommandEvent &event)
{
    show_status(PrintDialogStatus::PrintStatusInit);
    update_user_printer();
}

void SendToPrinterDialog::on_timer(wxTimerEvent &event)
{
    update_show_status();
}

void SendToPrinterDialog::on_selection_changed(wxCommandEvent &event)
{
    /* reset timeout and reading printer info */
    //m_status_bar->reset();
    timeout_count      = 0;

    auto selection = m_comboBox_printer->GetSelection();
    DeviceManager* dev = Slic3r::GUI::wxGetApp().getDeviceManager();
    if (!dev) return;

    Reset();

    MachineObject* obj = nullptr;
    for (int i = 0; i < m_list.size(); i++) {
        if (i == selection) {
            m_printer_last_select = m_list[i]->get_dev_id();
            obj = m_list[i];
            BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << "for send task, current printer id =  " << m_printer_last_select << std::endl;
            break;
        }
    }

    if (obj && !obj->get_lan_mode_connection_state()) {
        obj->command_get_version();
        obj->command_request_push_all();
        if (!dev->get_selected_machine()) {
            dev->set_selected_machine(m_printer_last_select);

        }else if (dev->get_selected_machine()->get_dev_id() != m_printer_last_select) {
            update_storage_list(std::vector<std::string>());
            dev->set_selected_machine(m_printer_last_select);
        }
    }
    else {
        BOOST_LOG_TRIVIAL(error) << "on_selection_changed dev_id not found";
        return;
    }

    update_show_status();
}

void SendToPrinterDialog::update_show_status()
{
    NetworkAgent* agent = Slic3r::GUI::wxGetApp().getAgent();
    DeviceManager* dev = Slic3r::GUI::wxGetApp().getDeviceManager();
    if (!agent) return;
    if (!dev) return;
    MachineObject* obj_ = dev->get_my_machine(m_printer_last_select);

    if (!obj_) {
        if (agent) {
            if (agent->is_user_login()) {
                show_status(PrintDialogStatus::PrintStatusInvalidPrinter);
            }
        }
        return;
    }

    /* check cloud machine connections */
    if (!obj_->is_lan_mode_printer()) {
        if (!agent->is_server_connected()) {
            show_status(PrintDialogStatus::PrintStatusConnectingServer);
            reset_timeout();
            return;
        }
    }

    if (!obj_->is_info_ready()) {
        if (is_timeout()) {
            show_status(PrintDialogStatus::PrintStatusReadingTimeout);
            return;
        }
        else {
            timeout_count++;
            show_status(PrintDialogStatus::PrintStatusReading);
            return;
        }
        return;
    }

    reset_timeout();

    // reading done
    if (is_blocking_printing(obj_)) {
        show_status(PrintDialogStatus::PrintStatusUnsupportedPrinter);
        return;
    }
    else if (obj_->is_in_upgrading()) {
        show_status(PrintDialogStatus::PrintStatusInUpgrading);
        return;
    }
    else if (obj_->is_system_printing()) {
        show_status(PrintDialogStatus::PrintStatusInSystemPrinting);
        return;
    }

    // check sdcard when if lan mode printer
   /* if (obj_->is_lan_mode_printer()) {
    }*/
    if (!obj_->is_support_send_to_sdcard) {
        show_status(PrintDialogStatus::PrintStatusNotSupportedSendToSDCard);
        return;
    }

    if (!m_is_in_sending_mode)
    {
        if (obj_->is_support_brtc && !m_ftp_try_connect)
        {
            std::string dev_id = obj_->get_dev_ip();
            if (m_device_select != dev_id)
            {
                show_status(PrintDialogStatus::PrintStatusConnecting);
                m_device_select.swap(dev_id);
                if (obj_->GetStorage()->get_sdcard_state() == DevStorage::SdcardState::NO_SDCARD)
                    m_if_has_sdcard = false;
                else
                    m_if_has_sdcard = true;

                if (m_filetransfer_tunnel) {
                    m_filetransfer_tunnel.reset();
                    m_filetransfer_tunnel = nullptr;
                }

                GetConnection();
            }
        }
        else
        {
            if (obj_->is_support_brtc && !obj_->is_lan_mode_printer())
            {
                show_status(PrintDialogStatus::PrintStatusPublicInitFailed);
                update_print_status_msg(_L("Connection timed out, please check your network."), true, true);
            }
            else
            {
                //use ftp
                if (obj_->GetStorage()->get_sdcard_state() == DevStorage::SdcardState::NO_SDCARD) {
                    show_status(PrintDialogStatus::PrintStatusNoSdcard);
                    return;
                }

                show_status(PrintDialogStatus::PrintStatusReadingFinished);
                return;
            }
        }
    }
}

bool SendToPrinterDialog::is_blocking_printing(MachineObject* obj_)
{
    DeviceManager* dev = Slic3r::GUI::wxGetApp().getDeviceManager();
    if (!dev) return true;

    PresetBundle* preset_bundle = wxGetApp().preset_bundle;
    auto source_model = preset_bundle->printers.get_edited_preset().get_printer_type(preset_bundle);
    auto target_model = obj_->printer_type;

    if (source_model != target_model) {
        std::vector<std::string> compatible_machine = obj_->get_compatible_machine();
        vector<std::string>::iterator it = find(compatible_machine.begin(), compatible_machine.end(), source_model);
        if (it == compatible_machine.end()) {
            return true;
        }
    }

    return false;
}

void SendToPrinterDialog::Enable_Refresh_Button(bool en)
{
    if (!en) {
        if (m_button_refresh->IsEnabled()) {
            m_button_refresh->Disable(); // ORCA no need to set colors again
        }
    } else {
        if (!m_button_refresh->IsEnabled()) {
            m_button_refresh->Enable(); // ORCA no need to set colors again
        }
    }
}

void SendToPrinterDialog::show_status(PrintDialogStatus status, std::vector<wxString> params)
{
    if (m_print_status != status)
        BOOST_LOG_TRIVIAL(info) << "select_machine_dialog: show_status = " << status;
    else
        return;
	m_print_status = status;

	// m_comboBox_printer
	if (status == PrintDialogStatus::PrintStatusRefreshingMachineList)
		m_comboBox_printer->Disable();
	else
		m_comboBox_printer->Enable();


    //connecting
    if(status == PrintDialogStatus::PrintStatusConnecting)
    {
        m_connecting_printer_msg->SetLabel(_L("Try to connect"));
        update_print_status_msg(wxEmptyString, true, true);
        m_connecting_panel->Show();
        m_animaicon->Play();

        Layout();
        Enable_Send_Button(false);
        Enable_Refresh_Button(false);
        return;

    } else if (status == PrintDialogStatus::PrintStatusReconnecting) {
        m_connecting_printer_msg->SetLabel(_L("Connection failed. Click the icon to retry"));
            update_print_status_msg(wxEmptyString, true, true);
            m_connecting_panel->Show();
            m_animaicon->Stop();
            m_animaicon->Enable();

            Layout();
            Enable_Send_Button(false);
            Enable_Refresh_Button(true);
            return;
    }
    else {
        m_connecting_panel->Hide();
    }


	// m_panel_warn m_simplebook
	if (status == PrintDialogStatus::PrintStatusSending) {
		sending_mode();
	}

	// other
	if (status == PrintDialogStatus::PrintStatusInit) {
		update_print_status_msg(wxEmptyString, false, false);
		Enable_Send_Button(false);
		Enable_Refresh_Button(true);
	}
	else if (status == PrintDialogStatus::PrintStatusInvalidPrinter) {
		update_print_status_msg(wxEmptyString, true, true);
		Enable_Send_Button(false);
		Enable_Refresh_Button(true);
	}
	else if (status == PrintDialogStatus::PrintStatusConnectingServer) {
		wxString msg_text = _L("Connecting to server...");
		update_print_status_msg(msg_text, true, true);
		Enable_Send_Button(true);
		Enable_Refresh_Button(true);
    }
    else if (status == PrintDialogStatus::PrintStatusReading) {
        wxString msg_text = _L("Synchronizing device information...");
        update_print_status_msg(msg_text, false, true);
        Enable_Send_Button(false);
        Enable_Refresh_Button(false);
    }

	else if (status == PrintDialogStatus::PrintStatusReadingFinished) {
		update_print_status_msg(wxEmptyString, false, true);
		Enable_Send_Button(true);
		Enable_Refresh_Button(true);
	}
	else if (status == PrintDialogStatus::PrintStatusReadingTimeout) {
		wxString msg_text = _L("Synchronizing device information timed out.");
		update_print_status_msg(msg_text, true, true);
		Enable_Send_Button(true);
		Enable_Refresh_Button(true);
	}
	else if (status == PrintDialogStatus::PrintStatusInUpgrading) {
		wxString msg_text = _L("Cannot send the print task when the upgrade is in progress");
		update_print_status_msg(msg_text, true, true);
		Enable_Send_Button(false);
		Enable_Refresh_Button(true);
	}
    else if (status == PrintDialogStatus::PrintStatusUnsupportedPrinter) {
        wxString msg_text = _L("The selected printer is incompatible with the chosen printer presets.");
        update_print_status_msg(msg_text, true, true);
        Enable_Send_Button(false);
        Enable_Refresh_Button(true);
    }
	else if (status == PrintDialogStatus::PrintStatusRefreshingMachineList) {
		update_print_status_msg(wxEmptyString, false, true);
		Enable_Send_Button(false);
		Enable_Refresh_Button(false);
	}
	else if (status == PrintDialogStatus::PrintStatusSending) {
		Enable_Send_Button(false);
		Enable_Refresh_Button(false);
	}
	else if (status == PrintDialogStatus::PrintStatusSendingCanceled) {
		Enable_Send_Button(true);
		Enable_Refresh_Button(true);
	}
	else if (status == PrintDialogStatus::PrintStatusNoSdcard) {
		wxString msg_text = _L("Storage needs to be inserted before send to printer.");
		update_print_status_msg(msg_text, true, true);
		Enable_Send_Button(false);
		Enable_Refresh_Button(true);
    }
    else if (status == PrintDialogStatus::PrintStatusNotOnTheSameLAN) {
        wxString msg_text = _L("The printer is required to be in the same LAN as Orca Slicer.");
        update_print_status_msg(msg_text, true, true);
        Enable_Send_Button(false);
        Enable_Refresh_Button(true);
    }
    else if (status == PrintDialogStatus::PrintStatusNotSupportedSendToSDCard) {
        wxString msg_text = _L("The printer does not support sending to printer storage.");
        update_print_status_msg(msg_text, true, true);
        Enable_Send_Button(false);
        Enable_Refresh_Button(true);
    } else if (status == PrintDialogStatus::PrintStatusPublicInitFailed) {
        Enable_Send_Button(false);
        Enable_Refresh_Button(true);
    } else if (status == PrintDialogStatus::PrintStatusPublicUploadFiled) {
        prepare_mode();
        Enable_Send_Button(true);
        Enable_Refresh_Button(true);
    }
    else {
		Enable_Send_Button(true);
		Enable_Refresh_Button(true);
    }
}


void SendToPrinterDialog::Enable_Send_Button(bool en)
{
    if (!en) {
        if (m_button_ensure->IsEnabled()) {
            m_button_ensure->Disable();
            m_storage_panel->Hide();
        }
    } else {
        if (!m_button_ensure->IsEnabled()) {
            m_button_ensure->Enable();
            m_storage_panel->Show();
        }
    }
}

void SendToPrinterDialog::on_dpi_changed(const wxRect &suggested_rect)
{
    m_button_refresh->Rescale(); // ORCA
    m_button_ensure->Rescale(); // ORCA
    m_status_bar->msw_rescale();
    Fit();
    Refresh();
}

void SendToPrinterDialog::set_default()
{
    //project name
    m_rename_switch_panel->SetSelection(0);

    wxString filename = m_plater->get_export_gcode_filename("", true, m_print_plate_idx == PLATE_ALL_IDX ? true : false);

    if (m_print_plate_idx == PLATE_ALL_IDX && filename.empty()) {
        filename = _L("Untitled");
    }

    if (filename.empty()) {
        filename = m_plater->get_export_gcode_filename("", true);
        if (filename.empty()) filename = _L("Untitled");
    }

    fs::path filename_path(filename.c_str());
    m_current_project_name = wxString::FromUTF8(filename_path.filename().string());

    //unsupported character filter
    m_current_project_name = from_u8(filter_characters(m_current_project_name.ToUTF8().data(), "<>[]:/\\|?*\""));

    m_rename_text->SetLabelText(m_current_project_name);
    m_rename_normal_panel->Layout();

    enable_prepare_mode = true;
    prepare_mode();

    //clear combobox
    m_list.clear();
    m_comboBox_printer->Clear();
    m_printer_last_select = "";
    m_print_info = "";
    m_comboBox_printer->SetValue(wxEmptyString);
    m_comboBox_printer->Enable();
    // rset status bar
    m_status_bar->reset();

    NetworkAgent* agent = wxGetApp().getAgent();
    if (agent) {
        if (agent->is_user_login()) {
            show_status(PrintDialogStatus::PrintStatusInit);
        }
    }

    // thumbmail
    //wxBitmap bitmap;
    ThumbnailData &data   = m_plater->get_partplate_list().get_curr_plate()->thumbnail_data;
    if (data.is_valid()) {
        wxImage image(data.width, data.height);
        image.InitAlpha();
        for (unsigned int r = 0; r < data.height; ++r) {
            unsigned int rr = (data.height - 1 - r) * data.width;
            for (unsigned int c = 0; c < data.width; ++c) {
                unsigned char *px = (unsigned char *) data.pixels.data() + 4 * (rr + c);
                image.SetRGB((int) c, (int) r, px[0], px[1], px[2]);
                image.SetAlpha((int) c, (int) r, px[3]);
            }
        }
        image  = image.Rescale(FromDIP(256), FromDIP(256));
        m_thumbnailPanel->set_thumbnail(image);
    } else {
        BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << " : thumbnail_data invalid." << "current plater: " << m_plater->get_partplate_list().get_curr_plate_index();
    }

    std::vector<std::string> materials;
    std::vector<std::string> display_materials;
    {
        auto preset_bundle = wxGetApp().preset_bundle;
        for (auto filament_name : preset_bundle->filament_presets) {
            for (auto iter = preset_bundle->filaments.lbegin(); iter != preset_bundle->filaments.end(); iter++) {
                if (filament_name.compare(iter->name) == 0) {
                    std::string display_filament_type;
                    std::string filament_type = iter->config.get_filament_type(display_filament_type);
                    display_materials.push_back(display_filament_type);
                    materials.push_back(filament_type);
                }
            }
        }
    }

    m_scrollable_region->Layout();
    m_scrollable_region->Fit();
    Layout();
    Fit();


    wxSize screenSize = wxGetDisplaySize();
    auto dialogSize = this->GetSize();


    // basic info
    auto       aprint_stats = m_plater->get_partplate_list().get_current_fff_print().print_statistics();
    wxString   time;
    PartPlate *plate = m_plater->get_partplate_list().get_curr_plate();
    if (plate) {
        if (plate->get_slice_result()) { time = wxString::Format("%s", short_time(get_time_dhms(plate->get_slice_result()->print_statistics.modes[0].time))); }
    }

    char weight[64];
    if (wxGetApp().app_config->get("use_inches") == "1") {
        ::sprintf(weight, "%.2f oz", aprint_stats.total_weight*0.035274); // ORCA remove spacing before text
    }else{
        ::sprintf(weight, "%.2f g", aprint_stats.total_weight); // ORCA remove spacing before text
    }

    m_stext_time->SetLabel(time);
    m_stext_weight->SetLabel(weight);
}

bool SendToPrinterDialog::Show(bool show)
{
    show_status(PrintDialogStatus::PrintStatusInit);

    // set default value when show this dialog
    if (show) {
        update_storage_list(std::vector<std::string>());
        set_default();
        update_user_machine_list();
        Reset();
        m_refresh_timer->Start(LIST_REFRESH_INTERVAL);

    } else {
        m_refresh_timer->Stop();
    }

    Layout();
    Fit();
    if (show) { CenterOnParent(); }

    return DPIDialog::Show(show);
}

extern wxString hide_passwd(wxString url, std::vector<wxString> const &passwords);
extern void     refresh_agora_url(char const *device, char const *dev_ver, char const *channel, void *context, void (*callback)(void *context, char const *url));

void SendToPrinterDialog::GetConnection()
{
    DeviceManager *dm  = GUI::wxGetApp().getDeviceManager();

    MachineObject *obj = dm->get_selected_machine();
    if (obj == nullptr) {
        BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << " : obj is empty";
        m_connection_status = ConnectionStatus::NOT_START;
    }

    int remote_proto = obj->get_file_remote();
    if (!remote_proto) {
        BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << " : remote_proto is not support";
        m_connection_status = ConnectionStatus::NOT_START;
    }

    if (obj->is_camera_busy_off()) {
        BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << " : camera is busy";
        m_connection_status = ConnectionStatus::NOT_START;
    }

    NetworkAgent *agent         = wxGetApp().getAgent();
    std::string   agent_version = agent ? agent->get_version() : "";
    std::string   dev_ver       = obj->get_ota_version();
    std::string   dev_id        = obj->get_dev_id();

     if (m_url_timer && m_url_timer->IsRunning())
     {
         m_url_timer->Stop();
     }

     m_url_timer.reset(new wxTimer());
     m_url_timer->SetOwner(this);
     this->Bind(
         wxEVT_TIMER,
         [this](wxTimerEvent &e) {
             BOOST_LOG_TRIVIAL(info) << "Timer callback triggered!";
             m_connection_status = ConnectionStatus::CONNECTION_FAILED;
             m_ftp_try_connect   = true;
             if (m_filetransfer_tunnel)
             {
                 m_filetransfer_tunnel.reset();
                 m_filetransfer_tunnel = nullptr;
             }

         },
         m_url_timer->GetId());
     m_url_timer->StartOnce(8000);

    if (agent) {
        if (m_tcp_try_connect) {
            std::string devIP      = obj->get_dev_ip();
            std::string accessCode = obj->get_access_code();
            std::string url        = "bambu:///local/" + devIP + "?port=6000&user=" + "bblp" + "&passwd=" + accessCode;
            BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << ": Connect method tcp";
            m_filetransfer_tunnel  = std::make_unique<FileTransferTunnel>(module(), url);
            m_filetransfer_tunnel->on_connection([this](bool is_success, int err_code, std::string error_msg) {
                CallAfter([this, is_success, err_code, error_msg]() {
                       OnConnection(is_success, err_code, error_msg);
                });
            });
            m_filetransfer_tunnel->start_connect();
        }
        else if (m_tutk_try_connect)
        {
            std::string protocols[] = {"", "\"tutk\"", "\"agora\"", "\"tutk\",\"agora\""};
            agent->get_camera_url(obj->get_dev_id() + "|" + dev_ver + "|" + protocols[1], [this, m = dev_id, v = agent->get_version(), dv = dev_ver](std::string url) {
                if (boost::algorithm::starts_with(url, "bambu:///")) {
                    url += "&device=" + m;
                    url += "&net_ver=" + v;
                    url += "&dev_ver=" + dv;
                    url += "&refresh_url=" + boost::lexical_cast<std::string>(&refresh_agora_url);
                    url += "&cli_id=" + wxGetApp().app_config->get("slicer_uuid");
                    url += "&cli_ver=" + std::string(SLIC3R_VERSION);
                }

                if (m_url_timer && m_url_timer->IsRunning())
                {
                    m_url_timer->Stop();
                }

                #if !BBL_RELEASE_TO_PUBLIC
                                BOOST_LOG_TRIVIAL(info) << "SendToPrinter::camera_url: " << hide_passwd(url, {"?uid=", "authkey=", "passwd="});
                #endif


                if (boost::algorithm::starts_with(url, "bambu:///"))
                {
                    BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << ": Connect method tutk";
                    m_filetransfer_tunnel = std::make_unique<FileTransferTunnel>(module(), url);
                    m_filetransfer_tunnel->on_connection([this](bool is_success, int err_code, std::string error_msg) {
                        CallAfter([this, is_success, err_code, error_msg]() { OnConnection(is_success, err_code, error_msg); });
                    });
                    m_filetransfer_tunnel->start_connect();
                }
                else
                {
                    std::string res = "";
                    if (!url.empty() && boost::ends_with(url, "]"))
                    {
                        size_t n = url.find_last_of('[');
                        if (n != std::string::npos)
                            res = url.substr(n + 1, url.length() - n - 2);
                    }
                    BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << " : Tutk url error: ress = " << res;
                }
            });
        }
    }
}

void SendToPrinterDialog::OnConnection(bool is_success, int error_code, std::string error_msg) {
    if (is_success)
    {
        if (m_url_timer && m_url_timer->IsRunning()) { m_url_timer->Stop(); }
        BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << "Connect success";
        m_connection_status = ConnectionStatus::CONNECTED;
        CreateMediaAbilityJob();
    }
    else
    {
        BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << "Connect failed, error_code is:" << error_code << "error_msg is :" << error_msg;
        m_connection_status = ConnectionStatus::CONNECTION_FAILED;
        ChangeConnectMethod();
        if (!m_tcp_try_connect && !m_tutk_try_connect) {
             show_status(PrintDialogStatus::PrintStatusPublicInitFailed);
             return;
        }
        m_filetransfer_tunnel.reset();
        m_filetransfer_tunnel = nullptr;
        GetConnection();
    }
}

void SendToPrinterDialog::ChangeConnectMethod()
{
    DeviceManager *dev = Slic3r::GUI::wxGetApp().getDeviceManager();
    if (!dev) return;
    MachineObject *obj = dev->get_my_machine(m_printer_last_select);
    if (!obj) return;

    bool is_lan = (obj->connection_type() == "lan");

    m_tcp_try_connect = false;

    if (is_lan) {
        m_ftp_try_connect  = true;
        m_tutk_try_connect = false;
    } else {
        if (m_connect_try_times == 0) {
            m_ftp_try_connect  = false;
            m_tutk_try_connect = true;
        } else {
            m_ftp_try_connect  = true;
            m_tutk_try_connect = false;
        }
    }
    m_connect_try_times++;
}

void SendToPrinterDialog::ResetConnectMethod()
{
    m_tcp_try_connect   = true;
    m_ftp_try_connect   = false;
    m_tutk_try_connect  = false;
    m_connect_try_times = 0;
}


void SendToPrinterDialog::ResetTunnelAndJob()
{
    if (m_filetransfer_uploadfile_job)
    {
        m_filetransfer_uploadfile_job->cancel();
        m_filetransfer_uploadfile_job.reset();
        m_filetransfer_uploadfile_job = nullptr;
    }
    if (m_filetransfer_mediability_job)
    {
        m_filetransfer_mediability_job->cancel();
        m_filetransfer_mediability_job.reset();
        m_filetransfer_mediability_job = nullptr;
    }
    if (m_filetransfer_tunnel)
    {
        m_filetransfer_tunnel.reset();
        m_filetransfer_tunnel = nullptr;
    }
}

void SendToPrinterDialog::CreateMediaAbilityJob()
{
     nlohmann::json media_ability = {{"cmd_type", 7}};
     m_filetransfer_mediability_job = std::make_unique<FileTransferJob>(module(), std::string(media_ability.dump()));
     m_filetransfer_mediability_job->on_result([this](int res, int resp_ec, std::string json_res, std::vector<std::byte> bin_res) {
         //this pl
         CallAfter([this, res, resp_ec, json_res] {
             if (res == 0) // 0 is success
             {
                 show_status(PrintDialogStatus::PrintStatusReadingFinished);
                 try
                 {
                     auto media_set = nlohmann::json::parse(json_res);
                     for (const auto &it : media_set)
                         m_ability_list.push_back(it.get<std::string>());

                     BOOST_LOG_TRIVIAL(info) << "CreateMediaAbilityJob::" << "request mediaability success." << json_res;
                     if (m_if_has_sdcard == false && m_ability_list.size() == 1)
                     {
                         show_status(PrintDialogStatus::PrintStatusNoSdcard);
                         return;
                     }
                     else
                     {
                         update_storage_list(m_ability_list);
                     }
                 }
                 catch (const nlohmann::json::exception &e)
                 {
                    BOOST_LOG_TRIVIAL(error) << "CreateMediaAbilityJob::" << ": " << e.what();
                 }
                 catch (...)
                 {
                     BOOST_LOG_TRIVIAL(error) << "CreateMediaAbilityJob::" << ": " << "parse error!";
                 }
             }
             else
             {
                 BOOST_LOG_TRIVIAL(error) << "CreateMediaAbilityJob::" << ":request mediaability failed. res =" << res << "resp_ec is:" << resp_ec;
                 show_status(PrintDialogStatus::PrintStatusPublicInitFailed);
                 update_print_status_msg(ParseErrorCode(resp_ec), false, true);
             }
         });
     });
     m_filetransfer_mediability_job->start_on(*m_filetransfer_tunnel);
}

void SendToPrinterDialog::CreateUploadFileJob(const std::string &path, const std::string &name)
{
    nlohmann::json upload_params = {
        {"cmd_type", 5},
    };
    upload_params["dest_storage"] = m_selected_storage;
    upload_params["dest_name"]    = name; // filenme no path
    upload_params["file_path"]    = path;

      BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << ": Begin CreateUploadFileJob";
    m_filetransfer_uploadfile_job = std::make_unique<FileTransferJob>(module(), std::string(upload_params.dump()));
    m_filetransfer_uploadfile_job->on_result([this](int res, int resp_ec, std::string json_res, std::vector<std::byte> bin_res) { //
        CallAfter([this, res, resp_ec, json_res, bin_res] {
            UploadFileRessultCallback(res, resp_ec,json_res, bin_res);
        });
    });

    m_filetransfer_uploadfile_job->on_msg([this](int kind, std::string json_res) {
        CallAfter([this, kind, json_res] {
            if (kind == 0) {
                try
                {
                    auto js       = nlohmann::json::parse(json_res);
                    int  progress = js["progress"].get<int>();
                    UploadFileProgressCallback(progress);
                }
                catch (const nlohmann::json::exception& e)
                {
                    BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << ": " << e.what();
                }
                catch (...)
                {
                    BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << ": " << "parse_json failed! ";
                }
            }
        });
    });
    m_filetransfer_uploadfile_job->start_on(*m_filetransfer_tunnel);
}

void SendToPrinterDialog::UploadFileProgressCallback(int progress)
{
    bool     cancelled = false;
    wxString msg       = _L("Sending...");
    m_status_bar->update_status(msg, cancelled, 10 + std::floor(progress * 0.9), true);

    if (m_task_timer && m_task_timer->IsRunning()) m_task_timer->Stop();

    if (progress == 99) {
        m_task_timer.reset(new wxTimer());
        m_task_timer->SetOwner(this);

        this->Bind(
            wxEVT_TIMER,
            [this](auto e) {
                show_status(PrintDialogStatus::PrintStatusPublicUploadFiled);
                update_print_status_msg(
                    _L("File upload timed out. Please check if the firmware version supports this operation or verify if the printer is functioning properly."), false, true);
            },
            m_task_timer->GetId());
        m_task_timer->StartOnce(timeout_period);
    }
}

void SendToPrinterDialog::UploadFileRessultCallback(int res, int resp_ec, std::string json_res, std::vector<std::byte> bin_res)
{
        if (m_task_timer && m_task_timer->IsRunning()) m_task_timer->Stop();

        if (res == 0)
        {
            BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << ":upload success to:" << m_selected_storage ;
            show_status(PrintDialogStatus::PrintStatusReadingFinished);
            wxCommandEvent *evt = new wxCommandEvent(m_plater->get_send_finished_event());
            evt->SetString(from_u8(m_current_project_name.utf8_string()));
            wxQueueEvent(m_plater, evt);
        }
        else {
            BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << ":upload failed to:"<< m_selected_storage << "res:" << res << "resp_ec is:" << resp_ec;
            show_status(PrintDialogStatus::PrintStatusPublicUploadFiled)    ;
           // if (err_msg.IsEmpty()) err_msg = _L("Sending failed, please try again!"); // TODO error code
            if (ParseErrorCode(resp_ec) != "")
                update_print_status_msg(ParseErrorCode(resp_ec), false, true);
            else
                update_print_status_msg("Sending failed, please try again!", false, true);
            m_filetransfer_uploadfile_job.reset();
            m_filetransfer_uploadfile_job = nullptr;
        }
}

void SendToPrinterDialog::Reset() {
    if (m_url_timer && m_url_timer->IsRunning()) { m_url_timer->Stop(); }
    m_ability_list.clear();
    update_storage_list(std::vector<std::string>());
    m_device_select.clear();
    ResetConnectMethod();
    ResetTunnelAndJob();

}

SendToPrinterDialog::~SendToPrinterDialog()
{
    delete m_refresh_timer;
    if (m_task_timer && m_task_timer->IsRunning())
        m_task_timer->Stop();
    if (m_url_timer && m_url_timer->IsRunning())
         m_url_timer->Stop();
}

}
}