# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2026-07-29 17:40-0300\n" "PO-Revision-Date: 2025-06-02 17:12+0900\n" "Last-Translator: crwusiz \n" "Language-Team: \n" "Language: ko_KR\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" "X-Generator: Poedit 3.6\n" # AI Translated msgid "Main Extruder" msgstr "메인 압출기" # AI Translated msgid "Main extruder" msgstr "메인 압출기" # AI Translated msgid "main extruder" msgstr "메인 압출기" # AI Translated msgid "Auxiliary Extruder" msgstr "보조 압출기" # AI Translated msgid "Auxiliary extruder" msgstr "보조 압출기" # AI Translated msgid "auxiliary extruder" msgstr "보조 압출기" msgid "Left Extruder" msgstr "왼쪽 압출기" msgid "Left extruder" msgstr "왼쪽 압출기" msgid "left extruder" msgstr "왼쪽 익스트루더" msgid "Right Extruder" msgstr "오른쪽 압출기" msgid "Right extruder" msgstr "오른쪽 압출기" msgid "right extruder" msgstr "오른쪽 익스트루더" # AI Translated msgid "Main Nozzle" msgstr "메인 노즐" # AI Translated msgid "Main nozzle" msgstr "메인 노즐" # AI Translated msgid "main nozzle" msgstr "메인 노즐" # AI Translated msgid "Auxiliary Nozzle" msgstr "보조 노즐" # AI Translated msgid "Auxiliary nozzle" msgstr "보조 노즐" # AI Translated msgid "auxiliary nozzle" msgstr "보조 노즐" msgid "Left Nozzle" msgstr "왼쪽 노즐" msgid "Left nozzle" msgstr "왼쪽 노즐" msgid "left nozzle" msgstr "왼쪽 노즐" msgid "Right Nozzle" msgstr "오른쪽 노즐" msgid "Right nozzle" msgstr "오른쪽 노즐" msgid "right nozzle" msgstr "오른쪽 노즐" # AI Translated msgid "Main Hotend" msgstr "메인 핫엔드" # AI Translated msgid "Main hotend" msgstr "메인 핫엔드" # AI Translated msgid "main hotend" msgstr "메인 핫엔드" # AI Translated msgid "Auxiliary Hotend" msgstr "보조 핫엔드" # AI Translated msgid "Auxiliary hotend" msgstr "보조 핫엔드" # AI Translated msgid "auxiliary hotend" msgstr "보조 핫엔드" # AI Translated msgid "Left Hotend" msgstr "왼쪽 핫엔드" # AI Translated msgid "Left hotend" msgstr "왼쪽 핫엔드" # AI Translated msgid "left hotend" msgstr "왼쪽 핫엔드" # AI Translated msgid "Right Hotend" msgstr "오른쪽 핫엔드" # AI Translated msgid "Right hotend" msgstr "오른쪽 핫엔드" # AI Translated msgid "right hotend" msgstr "오른쪽 핫엔드" # AI Translated msgid "main" msgstr "메인" # AI Translated msgid "auxiliary" msgstr "보조" # AI Translated msgid "Main" msgstr "메인" # AI Translated msgid "Auxiliary" msgstr "보조" msgid "left" msgstr "왼쪽" msgid "right" msgstr "오른쪽" msgid "Left" msgstr "왼쪽" msgid "Right" msgstr "오른쪽" msgid "extruder" msgstr "익스트루더" msgid "TPU is not supported by AMS." msgstr "TPU는 AMS에서 지원되지 않습니다." msgid "AMS does not support 'Bambu Lab PET-CF'." msgstr "AMS는 'Bambu Lab PET-CF'를 지원하지 않습니다." # AI Translated msgid "The current filament doesn't support the E3D high-flow nozzle and can't be used." msgstr "현재 필라멘트는 E3D 고유량 노즐을 지원하지 않아 사용할 수 없습니다." # AI Translated msgid "The current filament doesn't support the TPU high-flow nozzle and can't be used." msgstr "현재 필라멘트는 TPU 고유량 노즐을 지원하지 않아 사용할 수 없습니다." # AI Translated msgid "Auto dynamic flow calibration is not supported for TPU filament." msgstr "TPU 필라멘트는 자동 동적 압출량 교정을 지원하지 않습니다." # AI Translated msgid "Bambu TPU 85A is not supported for printing with 0.4 mm Standard or High Flow nozzles." msgstr "Bambu TPU 85A는 0.4 mm 표준 또는 고유량 노즐로 출력할 수 없습니다." # AI Translated msgid "How to feed TPU filament." msgstr "TPU 필라멘트를 공급하는 방법입니다." # AI Translated msgid "How to feed TPU filament on X2D." msgstr "X2D에서 TPU 필라멘트를 공급하는 방법입니다." msgid "Please cold pull before printing TPU to avoid clogging. You may use cold pull maintenance on the printer." msgstr "TPU 인쇄 전에 콜드 풀을 수행하여 막힘을 방지하세요. 프린터의 콜드 풀 유지보수 기능을 사용할 수 있습니다." msgid "Damp PVA will become flexible and get stuck inside AMS, please take care to dry it before use." msgstr "습한 PVA는 유연해져서 AMS 내부에 달라붙게 됩니다. 사용하기 전에 건조시키십시오." msgid "Damp PVA is flexible and may get stuck in extruder. Dry it before use." msgstr "습한 PVA는 유연하여 익스트루더에 끼일 수 있습니다. 사용 전에 건조시키세요." msgid "The rough surface of PLA Glow can accelerate wear on the AMS system, particularly on the internal components of the AMS Lite." msgstr "PLA Glow의 거친 표면은 AMS 시스템, 특히 AMS Lite의 내부 부품의 마모를 가속화할 수 있습니다." # AI Translated msgid "PLA Glow may wear the AMS first stage feeder. Use an external spool instead." msgstr "PLA Glow는 AMS 1단 피더를 마모시킬 수 있습니다. 대신 외부 스풀을 사용하십시오." msgid "CF/GF filaments are hard and brittle, it's easy to break or get stuck in AMS, please use with caution." msgstr "CF/GF 필라멘트는 단단하고 부서지기 쉽습니다. AMS에 걸리거나 부러지기 쉬우므로 주의하여 사용하세요." msgid "PPS-CF is brittle and could break in bended PTFE tube above Toolhead." msgstr "PPS-CF는 취성이 있어 툴헤드 위의 구부러진 PTFE 튜브에서 부러질 수 있습니다." msgid "PPA-CF is brittle and could break in bended PTFE tube above Toolhead." msgstr "PPA-CF는 취성이 있어 툴헤드 위의 구부러진 PTFE 튜브에서 부러질 수 있습니다." # AI Translated msgid "Default settings may affect print quality. Adjust as needed for best results." msgstr "기본 설정은 출력 품질에 영향을 줄 수 있습니다. 최상의 결과를 위해 필요에 따라 조정하십시오." # AI Translated #, c-format, boost-format msgid "%s has a risk of nozzle clogging when using 0.4mm high-flow nozzles. Use with caution." msgstr "%s은(는) 0.4mm 고유량 노즐 사용 시 노즐 막힘 위험이 있습니다. 주의해서 사용하십시오." # AI Translated #, c-format, boost-format msgid "%s filaments are hard and brittle and could break in AMS, and there is also a risk of nozzle clogging when using 0.4mm high-flow nozzles. Use with caution." msgstr "%s 필라멘트는 단단하고 잘 부러져 AMS 안에서 끊어질 수 있으며, 0.4mm 고유량 노즐 사용 시 노즐 막힘 위험도 있습니다. 주의해서 사용하십시오." # AI Translated #, c-format, boost-format msgid "%s has a risk of nozzle clogging when using 0.4, 0.6, 0.8mm high-flow nozzles. Use with caution." msgstr "%s은(는) 0.4, 0.6, 0.8mm 고유량 노즐 사용 시 노즐 막힘 위험이 있습니다. 주의해서 사용하십시오." # AI Translated #, c-format, boost-format msgid "%s may fail to load or unload due to the Filament Track Switch. If you wish to continue." msgstr "%s은(는) Filament Track Switch로 인해 로드 또는 언로드에 실패할 수 있습니다. 계속하시려면 진행하십시오." #, c-format, boost-format msgid "%s is not supported by %s extruder." msgstr "%s은(는) %s 익스트루더에서 지원되지 않습니다." # AI Translated #, c-format, boost-format msgid "There may be critical print quality issues when printing '%s' with %s Bowden extruder. Use with caution!" msgstr "'%s'을(를) %s 보우덴 압출기로 출력하면 심각한 출력 품질 문제가 발생할 수 있습니다. 주의해서 사용하십시오!" # AI Translated #, c-format, boost-format msgid "There may be critical print quality issues when printing '%s' with %s extruder. Use with caution!" msgstr "'%s'을(를) %s 압출기로 출력하면 심각한 출력 품질 문제가 발생할 수 있습니다. 주의해서 사용하십시오!" # AI Translated #, c-format, boost-format msgid "There may be print quality issues when printing '%s' with %s Bowden extruder. Use with caution." msgstr "'%s'을(를) %s 보우덴 압출기로 출력하면 출력 품질 문제가 발생할 수 있습니다. 주의해서 사용하십시오." # AI Translated #, c-format, boost-format msgid "There may be print quality issues when printing '%s' with %s extruder. Use with caution." msgstr "'%s'을(를) %s 압출기로 출력하면 출력 품질 문제가 발생할 수 있습니다. 주의해서 사용하십시오." msgid "High Flow" msgstr "높은 흐름" msgid "Standard" msgstr "표준" msgid "TPU High Flow" msgstr "TPU 고유량" msgid "Unknown" msgstr "알 수 없는" msgid "Hardened Steel" msgstr "경화강" msgid "Stainless Steel" msgstr "스테인레스 스틸" msgid "Tungsten Carbide" msgstr "텅스텐 카바이드" msgid "The toolhead and hotend rack may move. Please keep your hands away from the chamber." msgstr "툴헤드와 핫엔드 랙이 움직일 수 있습니다. 챔버에 손을 대지 마십시오." msgid "Warning" msgstr "경고" msgid "Hotend information may be inaccurate. Would you like to re-read the hotend? (Hotend information may change during power-off)." msgstr "핫엔드 정보가 부정확할 수 있습니다. 핫엔드를 다시 읽어 보시겠습니까? (핫엔드 정보는 전원이 꺼지는 동안 변경될 수 있습니다.)" msgid "I confirm all" msgstr "모두 확인합니다" msgid "Re-read all" msgstr "모두 다시 읽기" msgid "Reading the hotends, please wait." msgstr "핫엔드를 읽는 중입니다, 잠시 기다려 주십시오." msgid "During the hotend upgrade, the toolhead will move. Don't reach into the chamber." msgstr "핫엔드 업그레이드 중에 툴헤드가 움직일 것입니다. 챔버 내부에 손을 넣지 마십시오." msgid "Update" msgstr "업데이트" msgid "Current AMS humidity" msgstr "현재 AMS 습도" msgid "Humidity" msgstr "습도" msgid "Temperature" msgstr "온도" msgid "Left Time" msgstr "남은 시간" msgid "Drying" msgstr "건조 중" msgid "Idle" msgstr "대기 중" msgid "Model:" msgstr "모델:" msgid "Serial:" msgstr "시리얼:" msgid "Version:" msgstr "버전:" msgid "Latest version" msgstr "최신 버전" msgid "Row A" msgstr "A열" msgid "Row B" msgstr "B열" msgid "Toolhead" msgstr "툴헤드" msgid "Empty" msgstr "비어 있음" msgid "Error" msgstr "오류" msgid "Induction Hotend Rack" msgstr "인덕션 핫엔드 랙" msgid "Hotends Info" msgstr "핫엔드 정보" msgid "Read All" msgstr "모두 읽기" msgid "Reading " msgstr "읽는 중 " msgid "Please wait" msgstr "잠시 기다려 주세요" # AI Translated msgid "Reading" msgstr "읽는 중" msgid "Running..." msgstr "실행 중..." msgid "Raised" msgstr "상승함" msgid "The hotend is in an abnormal state and currently unavailable. Please go to 'Device -> Upgrade' to upgrade firmware." msgstr "이 핫엔드에 이상 상태가 발생하여 현재 사용할 수 없습니다. '장치 -> 업그레이드'로 이동하여 펌웨어를 업그레이드해 주세요." msgid "Abnormal Hotend" msgstr "비정상 핫엔드" msgid "Cancel" msgstr "취소" msgid "Jump to the upgrade page" msgstr "업그레이드 페이지로 이동" msgid "Refresh" msgstr "새로 고침" msgid "Refreshing" msgstr "새로고침 중" msgid "Hotend status abnormal, unavailable at present. Please upgrade the firmware and try again." msgstr "핫엔드 상태 비정상, 현재 사용할 수 없습니다. 펌웨어를 업그레이드한 후 다시 시도해 주세요." # AI Translated msgid "SN" msgstr "SN" msgid "Version" msgstr "버전" #, c-format, boost-format msgid "Used Time: %s" msgstr "사용 시간: %s" msgid "Dynamic nozzles are allocated on the current plate. Picking hotend is not supported." msgstr "다이내믹 노즐은 현재 플레이트에 할당됩니다. 핫엔드 선택은 지원되지 않습니다." msgid "Hotend Rack" msgstr "핫엔드 랙" msgid "ToolHead" msgstr "툴헤드" msgid "Nozzle information needs to be read" msgstr "노즐 정보를 읽어야 합니다" msgid "Support Painting" msgstr "서포트 칠하기" msgid "Apply" msgstr "적용" msgid "On highlighted overhangs only" msgstr "강조된 오버행에만 칠하기" # AI Translated msgid "Erase all" msgstr "모두 지우기" msgid "Highlight overhangs" msgstr "오버행 영역 강조" msgid "Tool type" msgstr "도구 유형" msgid "Gap fill" msgstr "간격 채우기" msgid "Reset direction" msgstr "방향 초기화" msgid "Section view" msgstr "단면도" msgid "Brush size" msgstr "붓 크기" msgid "Smart fill angle" msgstr "스마트 채우기 각도" msgid "Gap area" msgstr "간격 영역" msgid "Left mouse button" msgstr "마우스 왼쪽 버튼" msgid "Enforce supports" msgstr "서포트 강제" msgid "Right mouse button" msgstr "마우스 오른쪽 버튼" msgid "Block supports" msgstr "서포트 차단" msgid "Erase" msgstr "지우기" msgid "Mouse wheel" msgstr "마우스 휠" msgid "Auto support threshold angle: " msgstr "자동 서포트 임계값 각도: " msgid "Circle" msgstr "원" msgid "Sphere" msgstr "구체" msgid "Fill" msgstr "채우기" msgid "Gap Fill" msgstr "간격 채우기" msgid "Vertical" msgstr "수직" msgid "Horizontal" msgstr "수평" #, boost-format msgid "Allows painting only on facets selected by: \"%1%\"" msgstr "\"%1%\"에서 선택한 영역에만 칠하기 허용" msgid "Highlight faces according to overhang angle." msgstr "오버행 각도에 따라 면을 강조 표시합니다." msgid "No auto support" msgstr "자동 서포트 비활성" msgid "Done" msgstr "완료" msgid "Support generated" msgstr "서포트 생성됨" # AI Translated msgid "Entering Paint-on supports" msgstr "서포트 칠하기 진입" # AI Translated msgid "Leaving Paint-on supports" msgstr "서포트 칠하기 나가기" # AI Translated msgid "Paint-on supports editing" msgstr "서포트 칠하기 편집" msgid "Gizmo-Place on Face" msgstr "변형도구 - 면에 배치" msgid "Lay on Face" msgstr "바닥면 선택" #, boost-format msgid "Filament count exceeds the maximum number that painting tool supports. Only the first %1% filaments will be available in painting tool." msgstr "필라멘트 수가 페인팅 도구가 지원하는 최대 수를 초과합니다. 첫 번째 %1% 필라멘트만 페인팅 도구에서 사용할 수 있습니다." msgid "Color Painting" msgstr "색 칠하기" msgid "Brush shape" msgstr "붓 모양" msgid "Paint" msgstr "칠하기" msgid "Choose filament" msgstr "필라멘트 선택" msgid "Edge detection" msgstr "가장자리 감지" msgid "Triangles" msgstr "삼각형" msgid "Filaments" msgstr "필라멘트" msgid "Brush" msgstr "붓" msgid "Smart fill" msgstr "스마트 채우기" msgid "Bucket fill" msgstr "버킷 채우기" msgid "Height range" msgstr "높이 범위" msgid "Toggle Wireframe" msgstr "와이어프레임 전환" msgid "Remap filaments" msgstr "필라멘트 재매핑" msgid "Remap" msgstr "재매핑" msgid "Reset" msgstr "초기화" # AI Translated msgctxt "Keyboard Shortcut" msgid "Enter" msgstr "Enter" msgid "Shortcut Key " msgstr "단축키 " msgid "Triangle" msgstr "삼각형" msgid "Height Range" msgstr "높이 범위" msgid "Remove painted color" msgstr "칠한 색 제거" #, boost-format msgid "Painted using: Filament %1%" msgstr "칠하기에 사용한 필라멘트 %1%" msgid "To:" msgstr "대상:" # AI Translated msgid "Entering color painting" msgstr "색상 칠하기 진입" # AI Translated msgid "Leaving color painting" msgstr "색상 칠하기 나가기" # AI Translated msgid "Color painting editing" msgstr "색상 칠하기 편집" msgid "Paint-on fuzzy skin" msgstr "퍼지 스킨 칠하기" msgid "Add fuzzy skin" msgstr "퍼지 스킨 추가" msgid "Remove fuzzy skin" msgstr "퍼지 스킨 제거" msgid "Reset selection" msgstr "선택 초기화" msgid "Warning: Fuzzy skin is disabled, painted fuzzy skin will not take effect!" msgstr "경고: 퍼지 스킨이 비활성화되어 있습니다. 칠한 퍼지 스킨이 적용되지 않습니다!" msgid "Enable painted fuzzy skin for this object" msgstr "이 객체의 칠한 퍼지 스킨 활성화" # AI Translated msgid "Entering Paint-on fuzzy skin" msgstr "퍼지 스킨 칠하기 진입" # AI Translated msgid "Leaving Paint-on fuzzy skin" msgstr "퍼지 스킨 칠하기 나가기" # AI Translated msgid "Paint-on fuzzy skin editing" msgstr "퍼지 스킨 칠하기 편집" msgid "Move" msgstr "이동" msgid "Please select at least one object." msgstr "객체를 하나 이상 선택하세요." msgid "Gizmo-Move" msgstr "변형도구 - 이동" msgid "Rotate" msgstr "회전" msgid "Gizmo-Rotate" msgstr "변형도구 - 회전" msgid "Optimize orientation" msgstr "방향 최적화" msgctxt "Verb" msgid "Scale" msgstr "배율" msgid "Gizmo-Scale" msgstr "변형도구 - 배율" msgid "Error: Please close all toolbar menus first" msgstr "오류: 먼저 모든 도구 모음 메뉴를 닫으십시오." # AI Translated msgctxt "inches" msgid "in" msgstr "″" msgid "mm" msgstr "mm" msgid "Part selection" msgstr "파트 선택" msgid "Fixed step drag" msgstr "고정 단계 드래그" # AI Translated msgid "Context Menu" msgstr "컨텍스트 메뉴" # AI Translated msgid "Toggle Auto-Drop" msgstr "자동 내려놓기 전환" msgid "Single sided scaling" msgstr "단면 스케일링" msgid "Position" msgstr "위치" msgid "Rotate (relative)" msgstr "회전 (상대)" msgid "Scale ratios" msgstr "배율비" msgid "Object operations" msgstr "객체 작업" msgid "Scale" msgstr "배율" msgid "Volume operations" msgstr "용량 작업" msgid "Translate" msgstr "번역" msgid "Group operations" msgstr "그룹 작업" msgid "Set orientation" msgstr "방향 설정" msgid "Set scale" msgstr "배율 설정" msgid "Reset position" msgstr "위치 초기화" msgid "Reset rotation" msgstr "회전 재설정" # AI Translated msgid "World" msgstr "월드" msgid "Object" msgstr "객체" msgid "Part" msgstr "부품" # AI Translated msgid "Relative" msgstr "상대" # AI Translated msgid "Coordinate system used for transform actions." msgstr "변형 작업에 사용되는 좌표계입니다." # AI Translated msgid "Absolute" msgstr "절대" msgid "Reset current rotation to the value when open the rotation tool." msgstr "회전 도구를 열었을 때의 값으로 현재 회전을 초기화합니다." msgid "Reset current rotation to real zeros." msgstr "현재 회전을 0으로 초기화합니다." msgctxt "Noun" msgid "Scale" msgstr "배율" #. TRN - Input label. Be short as possible msgid "Size" msgstr "크기" msgid "Uniform scale" msgstr "균일 배율" msgid "Planar" msgstr "평면" msgid "Dovetail" msgstr "도브테일" msgid "Auto" msgstr "자동" msgid "Manual" msgstr "수동" msgid "Plug" msgstr "플러그" msgid "Dowel" msgstr "도웰" msgid "Snap" msgstr "스냅" msgid "Prism" msgstr "프리즘" msgid "Frustum" msgstr "원뿔대" msgid "Square" msgstr "사각형" msgid "Hexagon" msgstr "육각형" msgid "Keep orientation" msgstr "방향 유지" msgid "Place on cut" msgstr "자른 위치에 놓기" msgid "Flip upside down" msgstr "거꾸로 뒤집기" msgid "Connectors" msgstr "커넥터" msgid "Type" msgstr "유형" msgid "Style" msgstr "모양" msgid "Shape" msgstr "형태" #. TRN - Input label. Be short as possible #. Size in emboss direction #. TRN - Input label. Be short as possible msgid "Depth" msgstr "깊이" #. TRN - Input label. Be short as possible #. Angle between Y axis and text line direction. #. TRN - Input label. Be short as possible msgid "Rotation" msgstr "회전" msgid "Groove" msgstr "그루브" msgid "Width" msgstr "너비" msgid "Flap Angle" msgstr "플랩 각도" msgid "Groove Angle" msgstr "홈 각도" msgid "Cut position" msgstr "자르기 위치" msgid "Build Volume" msgstr "빌드 볼륨" msgid "Multiple" msgstr "다수" # AI Translated msgid "Count" msgstr "개수" msgid "Gap" msgstr "간격" msgid "Spacing" msgstr "간격" msgid "" "Click to flip the cut plane\n" "Drag to move the cut plane" msgstr "" "클릭하여 잘라낸 면을 뒤집습니다\n" "드래그하여 잘라낸 면을 이동합니다" msgid "" "Click to flip the cut plane\n" "Drag to move the cut plane\n" "Right-click a part to assign it to the other side" msgstr "" "클릭하여 잘라낸 면을 뒤집습니다\n" "드래그하여 절단 면을 이동합니다\n" "파트를 마우스 오른쪽 버튼으로 클릭하여 다른 쪽에 할당합니다" msgid "Move cut plane" msgstr "절단면 이동" msgid "Mode" msgstr "모드" msgid "Change cut mode" msgstr "자르기 모드 변경" msgid "Tolerance" msgstr "공차" msgid "Drag" msgstr "드래그" # AI Translated msgid "Move cut line" msgstr "절단선 이동" msgid "Draw cut line" msgstr "절단선 그리기" msgid "Add connector" msgstr "커넥터 추가" msgid "Remove connector" msgstr "커넥터 제거" msgid "Move connector" msgstr "커넥터 이동" msgid "Add connector to selection" msgstr "선택 항목에 커넥터 추가" msgid "Remove connector from selection" msgstr "선택 항목에서 커넥터 제거" msgid "Select all connectors" msgstr "모든 커넥터 선택" # AI Translated msgctxt "Cut tool" msgid "Cut" msgstr "자르기" msgid "Rotate cut plane" msgstr "절단면 회전" msgid "Remove connectors" msgstr "커넥터 제거" msgid "Bulge" msgstr "부풀림" msgid "Bulge proportion related to radius" msgstr "반경과 관련된 부품림 비율" msgid "Space" msgstr "스페이스" msgid "Space proportion related to radius" msgstr "반경과 관련된 공간 비율" msgid "Confirm connectors" msgstr "커넥터 승인" msgid "Flip cut plane" msgstr "절단면 뒤집기" msgid "Groove change" msgstr "그루브 변경" #. TRN: This is an entry in the Undo/Redo stack. The whole line will be 'Edited: (name of whatever was edited)'. msgid "Edited" msgstr "수정됨" msgid "Reset cutting plane" msgstr "절단면 재설정" msgid "Edit connectors" msgstr "커넥터 편집" msgid "Add connectors" msgstr "커넥터 추가" msgid "Upper part" msgstr "상부 부품" msgid "Lower part" msgstr "하부 부품" msgid "Keep" msgstr "유지" msgid "Flip" msgstr "뒤집기" msgid "After cut" msgstr "잘라내기 후" msgid "Cut to parts" msgstr "부품으로 자르기" msgid "Reset cutting plane and remove connectors" msgstr "절단면 재설정 및 커넥터 제거" # AI Translated msgid "Reset Cut" msgstr "자르기 초기화" msgid "Perform cut" msgstr "잘라내기 실행" msgid "Invalid connectors detected" msgstr "잘못된 커넥터가 감지됨" #, c-format, boost-format msgid "%1$d connector is out of cut contour" msgid_plural "%1$d connectors are out of cut contour" msgstr[0] "%1$d 커넥터가 절단 윤곽에서 벗어남" #, c-format, boost-format msgid "%1$d connector is out of object" msgid_plural "%1$d connectors are out of object" msgstr[0] "%1$d 커넥터가 물체에서 벗어남" msgid "Some connectors are overlapped" msgstr "일부 커넥터가 겹칩니다" msgid "Select at least one object to keep after cutting." msgstr "잘라낸 후 보관할 객체를 하나 이상 선택합니다." msgid "Cut plane is placed out of object" msgstr "절단면이 객체 밖으로 배치됨" msgid "Cut plane with groove is invalid" msgstr "홈이 있는 절단면은 유효하지 않습니다" msgid "Connector" msgstr "커넥터" # AI Translated #, boost-format msgid "" "Objects(%1%) have duplicated connectors. Some connectors may be missing in slicing result.\n" "Please report to the OrcaSlicer team in which scenario this issue happened.\n" "Thank you." msgstr "" "객체(%1%)에 중복된 커넥터가 있습니다. 슬라이싱 결과에서 일부 커넥터가 누락될 수 있습니다.\n" "어떤 상황에서 이 문제가 발생했는지 OrcaSlicer 팀에 보고해 주십시오.\n" "감사합니다." msgid "Cut by Plane" msgstr "평면으로 자르기" msgid "Non-manifold edges be caused by cut tool: do you want to fix now?" msgstr "절단 도구로 인해 메인폴드가 아닌 가장자리가 발생했는데 지금 수정하시겠습니까?" msgid "Repairing model object" msgstr "모델 객체 수리 중" msgid "Cut by line" msgstr "라인별로 자르기" msgid "Delete connector" msgstr "커넥터 삭제" # AI Translated msgid "Entering Cut gizmo" msgstr "자르기 변형도구 진입" # AI Translated msgid "Leaving Cut gizmo" msgstr "자르기 변형도구 나가기" # AI Translated msgid "Cut gizmo editing" msgstr "자르기 변형도구 편집" msgid "Mesh name" msgstr "메시 이름" msgid "Detail level" msgstr "세부 레벨" msgid "Decimate ratio" msgstr "감소 비율" #, boost-format msgid "Processing model '%1%' with more than 1M triangles could be slow. It is highly recommended to simplify the model." msgstr "1백만 개가 넘는 삼각형이 있는 모델 '%1%'의 처리 속도가 느릴 수 있습니다. 모델을 단순화하는 것이 좋습니다." msgid "Simplify model" msgstr "모델 단순화" msgid "Simplify" msgstr "단순화" msgid "Simplification is currently only allowed when a single part is selected" msgstr "단순화는 현재 단일 부품이 선택된 경우에만 허용됩니다" msgid "Extra high" msgstr "매우 높음" msgid "High" msgstr "높음" msgid "Medium" msgstr "중간" msgid "Low" msgstr "낮음" msgid "Extra low" msgstr "매우 낮음" #, c-format, boost-format msgid "%d triangles" msgstr "%d 삼각형" msgid "Show wireframe" msgstr "와이어프레임 보기" msgid "Unable to apply when processing preview" msgstr "미리 보기 진행 시 적용할 수 없습니다." msgid "Operation already cancelling. Please wait a few seconds." msgstr "작업이 이미 취소중입니다. 몇 초만 기다려 주십시오." msgid "Face recognition" msgstr "바닥면 인식" msgid "Perform Recognition" msgstr "인식 수행" msgid "Enforce seam" msgstr "재봉선 적용" msgid "Block seam" msgstr "재봉선 차단" msgid "Seam painting" msgstr "재봉선 칠하기" msgid "Remove selection" msgstr "선택 삭제" msgid "Entering seam painting" msgstr "재봉선 칠하기 입력" msgid "Leaving Seam painting" msgstr "재봉선 칠하기 떠나기" msgid "Paint-on seam editing" msgstr "페인트칠 재봉선 편집" #. TRN - Input label. Be short as possible #. Select look of letter shape msgid "Font" msgstr "글꼴" msgid "Thickness" msgstr "두께" msgid "Text Gap" msgstr "글자 간격" msgid "Angle" msgstr "각도" # AI Translated msgid "Embedded depth" msgstr "내장 깊이" msgid "Input text" msgstr "텍스트 입력" msgid "Surface" msgstr "표면" msgid "Horizontal text" msgstr "가로 텍스트" msgid "Shift+" msgstr "Shift+" msgid "Mouse move up or down" msgstr "마우스 위 또는 아래로 이동" msgid "Rotate text" msgstr "텍스트 회전" msgid "Text shape" msgstr "텍스트 모양" #. TRN - Title in Undo/Redo stack after rotate with text around emboss axe msgid "Text rotate" msgstr "텍스트 회전" #. TRN - Title in Undo/Redo stack after move with text along emboss axe - From surface msgid "Text move" msgstr "텍스트 이동" msgid "Set Mirror" msgstr "반전 설정" msgid "Embossed text" msgstr "텍스트 양각" msgid "Enter emboss gizmo" msgstr "변형도구 - 양각 입력" msgid "Leave emboss gizmo" msgstr "변형도구 - 양각 나가기" msgid "Embossing actions" msgstr "양각 작업" # AI Translated msgid "Position on surface" msgstr "표면 위 위치" msgid "Emboss" msgstr "양각" # AI Translated msgid "NORMAL" msgstr "보통" # AI Translated msgid "SMALL" msgstr "작게" # AI Translated msgid "ITALIC" msgstr "기울임꼴" # AI Translated msgid "SWISS" msgstr "스위스" # AI Translated msgid "MODERN" msgstr "모던" msgid "First font" msgstr "첫 번째 글꼴" msgid "Default font" msgstr "기본 글꼴" msgid "Advanced" msgstr "고급" # AI Translated msgid "Reset all options except the text and operation" msgstr "텍스트와 작업을 제외한 모든 옵션 초기화" msgid "The text cannot be written using the selected font. Please try choosing a different font." msgstr "선택한 글꼴로는 텍스트를 쓸 수 없습니다. 다른 글꼴을 선택해 보세요." msgid "Embossed text cannot contain only white spaces." msgstr "양각 텍스트에는 공백만 포함될 수 없습니다." msgid "Text contains character glyph (represented by '?') unknown by font." msgstr "텍스트에 글꼴로 알 수 없는 문자 모양('?'으로 표시)이 포함되어 있습니다." msgid "Text input doesn't show font skew." msgstr "텍스트 입력에는 글꼴 기울어짐이 표시되지 않습니다." msgid "Text input doesn't show font boldness." msgstr "텍스트 입력에는 글꼴의 굵기가 표시되지 않습니다." msgid "Text input doesn't show gap between lines." msgstr "텍스트 입력 시 줄 사이의 간격이 표시되지 않습니다." msgid "Too tall, diminished font height inside text input." msgstr "텍스트 입력 내에서 너무 길고 글꼴 높이가 줄어듭니다." msgid "Too small, enlarged font height inside text input." msgstr "텍스트 입력 내 글꼴 높이가 너무 작아서 확대되었습니다." msgid "Text doesn't show current horizontal alignment." msgstr "텍스트에 현재 가로 정렬이 표시되지 않습니다." msgid "Revert font changes." msgstr "글꼴 변경 사항을 되돌립니다." #, boost-format msgid "Font \"%1%\" can't be selected." msgstr "글꼴 \"%1%\"를 선택할 수 없습니다." msgid "Operation" msgstr "작업" #. TRN EmbossOperation #. ORCA msgid "Join" msgstr "접합부" msgid "Click to change text into object part." msgstr "텍스트를 객체 부분으로 변경하려면 클릭하세요." msgid "You can't change a type of the last solid part of the object." msgstr "객체의 마지막 솔리드 부분 유형은 변경할 수 없습니다." msgctxt "EmbossOperation" msgid "Cut" msgstr "자르기" msgid "Click to change part type into negative volume." msgstr "부품 유형을 음수 볼륨으로 변경하려면 클릭하세요." msgid "Modifier" msgstr "수정자" msgid "Click to change part type into modifier." msgstr "부품 유형을 수정자로 변경하려면 클릭하세요." msgid "Change Text Type" msgstr "텍스트 유형 변경" #, boost-format msgid "Rename style (%1%) for embossing text" msgstr "양각 텍스트의 스타일 이름 바꾸기(%1%)" msgid "Name can't be empty." msgstr "이름은 비워둘 수 없습니다." msgid "Name has to be unique." msgstr "이름은 고유해야 합니다." msgid "OK" msgstr "확인" msgid "Rename style" msgstr "스타일 이름 바꾸기" msgid "Rename current style." msgstr "현재 스타일의 이름을 바꿉니다." msgid "Can't rename temporary style." msgstr "임시 스타일의 이름을 바꿀 수 없습니다." msgid "First Add style to list." msgstr "먼저 목록에 스타일을 추가합니다." #, boost-format msgid "Save %1% style" msgstr "%1% 스타일 저장" msgid "No changes to save." msgstr "저장할 변경사항이 없습니다." msgid "New name of style" msgstr "스타일의 새 이름" msgid "Save as new style" msgstr "새 스타일로 저장" msgid "Only valid font can be added to style." msgstr "유효한 글꼴만 스타일에 추가할 수 있습니다." msgid "Add style to my list." msgstr "내 목록에 스타일을 추가하세요." msgid "Save as new style." msgstr "새 스타일로 저장합니다." msgid "Remove style" msgstr "스타일 제거" msgid "Can't remove the last existing style." msgstr "마지막 기존 스타일을 제거할 수 없습니다." #, boost-format msgid "Are you sure you want to permanently remove the \"%1%\" style?" msgstr "\"%1%\" 스타일을 영구적으로 제거하시겠습니까?" #, boost-format msgid "Delete \"%1%\" style." msgstr "\"%1%\" 스타일을 삭제합니다." #, boost-format msgid "Can't delete \"%1%\". It is last style." msgstr "\"%1%\"을(를) 삭제할 수 없습니다. 마지막 스타일입니다." #, boost-format msgid "Can't delete temporary style \"%1%\"." msgstr "임시 스타일 \"%1%\"을(를) 삭제할 수 없습니다." #, boost-format msgid "Modified style \"%1%\"" msgstr "수정된 스타일 \"%1%\"" #, boost-format msgid "Current style is \"%1%\"" msgstr "현재 스타일은 \"%1%\"입니다." #, boost-format msgid "" "Changing style to \"%1%\" will discard current style modification.\n" "\n" "Would you like to continue anyway?" msgstr "" "스타일을 \"%1%\"으로 변경하면 현재 스타일 수정 사항이 삭제됩니다.\n" "\n" "그래도 계속하시겠습니까?" msgid "Not valid style." msgstr "유효한 스타일이 아닙니다." #, boost-format msgid "Style \"%1%\" can't be used and will be removed from a list." msgstr "스타일 \"%1%\"는 사용할 수 없으며 목록에서 제거됩니다." msgid "Unset italic" msgstr "이탤릭체 설정해제" msgid "Set italic" msgstr "이탤릭체 설정" msgid "Unset bold" msgstr "굵게 설정해제" msgid "Set bold" msgstr "굵게 설정" msgid "Revert text size." msgstr "텍스트 크기를 되돌립니다." msgid "Revert embossed depth." msgstr "양각 깊이를 되돌립니다." msgid "" "Advanced options cannot be changed for the selected font.\n" "Select another font." msgstr "" "선택한 글꼴에 대해서는 고급 옵션을 변경할 수 없습니다.\n" "다른 글꼴을 선택하세요." msgid "Revert using of model surface." msgstr "모델 표면 사용을 되돌립니다." msgid "Revert Transformation per glyph." msgstr "문자 모양 변환을 되돌립니다." msgid "Set global orientation for whole text." msgstr "전체 텍스트에 대한 전역 방향을 설정합니다." msgid "Set position and orientation per glyph." msgstr "문자 모양별로 위치와 방향을 설정합니다." msgctxt "Alignment" msgid "Left" msgstr "왼쪽" msgctxt "Alignment" msgid "Center" msgstr "중앙" msgctxt "Alignment" msgid "Right" msgstr "오른쪽" msgctxt "Alignment" msgid "Top" msgstr "위" msgctxt "Alignment" msgid "Middle" msgstr "가운데" msgctxt "Alignment" msgid "Bottom" msgstr "아래" msgid "Revert alignment." msgstr "정렬을 되돌립니다." #. TRN EmbossGizmo: font units msgid "points" msgstr "위치" msgid "Revert gap between characters" msgstr "문자 사이의 간격 되돌리기" msgid "Distance between characters" msgstr "문자 사이의 거리" msgid "Revert gap between lines" msgstr "선 사이의 간격 되돌리기" msgid "Distance between lines" msgstr "선 사이의 거리" msgid "Undo boldness" msgstr "두드러짐 취소" msgid "Tiny / Wide glyphs" msgstr "작은/넓은 문자 모양" msgid "Undo letter's skew" msgstr "문자 기울어짐 실행 취소" msgid "Italic strength ratio" msgstr "이텔릭체 강도 비율" msgid "Undo translation" msgstr "번역 취소" msgid "Distance of the center of the text to the model surface." msgstr "텍스트 중심에서 모델 표면까지의 거리입니다." msgid "Undo rotation" msgstr "회전 실행 취소" msgid "Rotate text Clockwise." msgstr "텍스트를 시계 방향으로 회전합니다." msgid "Unlock the text's rotation when moving text along the object's surface." msgstr "객체 표면을 따라 텍스트를 이동할 때 텍스트 회전을 잠금 해제합니다." msgid "Lock the text's rotation when moving text along the object's surface." msgstr "객체 표면을 따라 텍스트를 이동할 때 텍스트 회전을 잠급니다." msgid "Select from True Type Collection." msgstr "트루타입 컬렉션에서 선택하세요." msgid "Set text to face camera" msgstr "카메라를 향하도록 텍스트 설정" msgid "Orient the text towards the camera." msgstr "텍스트 방향을 카메라 쪽으로 향하게 합니다." #, boost-format msgid "Font \"%1%\" can't be used. Please select another." msgstr "글꼴 “%1%”를 사용할 수 없습니다. 다른 글꼴을 선택하세요." #, boost-format msgid "Can't load exactly same font (\"%1%\"). Application selected a similar one (\"%2%\"). You have to specify font for enable edit text." msgstr "정확히 동일한 글꼴(\"%1%\")을 로드할 수 없습니다. 응용 프로그램이 유사한 항목(\"%2%\")을 선택했습니다. 텍스트 편집을 활성화하려면 글꼴을 지정해야 합니다." msgid "No symbol" msgstr "기호 없음" msgid "Loading" msgstr "로드 중" msgid "In queue" msgstr "대기열에 있음" #. TRN - Input label. Be short as possible #. Height of one text line - Font Ascent msgid "Height" msgstr "높이" #. TRN - Input label. Be short as possible #. Copy surface of model on surface of the embossed text #. TRN - Input label. Be short as possible msgid "Use surface" msgstr "표면 사용" #. TRN - Input label. Be short as possible #. Option to change projection on curved surface #. for each character(glyph) in text separately msgid "Per glyph" msgstr "문자모양 당" #. TRN - Input label. Be short as possible #. Align Top|Middle|Bottom and Left|Center|Right msgid "Alignment" msgstr "조정" #. TRN - Input label. Be short as possible msgid "Char gap" msgstr "문자 간격" #. TRN - Input label. Be short as possible msgid "Line gap" msgstr "줄 간격" #. TRN - Input label. Be short as possible msgid "Boldness" msgstr "두드러짐" #. TRN - Input label. Be short as possible #. Like Font italic msgid "Skew ratio" msgstr "기울어짐 비율" #. TRN - Input label. Be short as possible #. Distance from model surface to be able #. move text as part fully into not flat surface #. move text as modifier fully out of not flat surface #. TRN - Input label. Be short as possible msgid "From surface" msgstr "표면에서" #. TRN - Input label. Be short as possible #. Keep vector from bottom to top of text aligned with printer Y axis msgid "Keep up" msgstr "유지하다" #. TRN - Input label. Be short as possible. #. Some Font file contain multiple fonts inside and #. this is numerical selector of font inside font collections msgid "Collection" msgstr "수집" #. TRN - Title in Undo/Redo stack after rotate with SVG around emboss axe msgid "SVG rotate" msgstr "SVG 회전" #. TRN - Title in Undo/Redo stack after move with SVG along emboss axe - From surface msgid "SVG move" msgstr "SVG 이동" msgid "Enter SVG gizmo" msgstr "변형도구 - SVG 입력" msgid "Leave SVG gizmo" msgstr "변형도구 - SVG 나가기" msgid "SVG actions" msgstr "SVG 작업" msgid "SVG" msgstr "SVG" #, boost-format msgid "Opacity (%1%)" msgstr "불투명도(%1%)" #, boost-format msgid "Color gradient (%1%)" msgstr "색상 그라데이션(%1%)" msgid "Undefined fill type" msgstr "정의되지 않은 채우기 유형" msgid "Linear gradient" msgstr "선형 그래디언트" msgid "Radial gradient" msgstr "방사형 그라데이션" msgid "Open filled path" msgstr "채워진 경로 열기" msgid "Undefined stroke type" msgstr "정의되지 않은 스트로크 유형" msgid "Path can't be healed from self-intersection and multiple points." msgstr "자체 교차 및 여러 지점에서는 경로를 복구할 수 없습니다." msgid "Final shape contains self-intersection or multiple points with same coordinate." msgstr "최종 모양에는 자체 교차점이나 동일한 좌표를 가진 여러 점이 포함되어 있습니다." #, boost-format msgid "Shape is marked as invisible (%1%)." msgstr "모양이 보이지 않음(%1%)으로 표시되었습니다." #. TRN: The first placeholder is shape identifier, the second is text describing the problem. #, boost-format msgid "Fill of shape (%1%) contains unsupported: %2%." msgstr "도형 채우기(%1%)에는 지원되지 않는 %2%가 포함되어 있습니다." #, boost-format msgid "Stroke of shape (%1%) is too thin (minimal width is %2% mm)." msgstr "모양의 획(%1%)이 너무 얇습니다(최소 너비는 %2%mm)." #, boost-format msgid "Stroke of shape (%1%) contains unsupported: %2%." msgstr "모양의 획(%1%)에는 지원되지 않는 %2%가 포함되어 있습니다." msgid "Face the camera" msgstr "카메라를 바라보세요" #. TRN - Preview of filename after clear local filepath. msgid "Unknown filename" msgstr "알 수 없는 파일 이름" #, boost-format msgid "SVG file path is \"%1%\"" msgstr "SVG 파일 경로는 \"%1%\"입니다." msgid "Reload SVG file from disk." msgstr "디스크에서 SVG 파일을 다시 로드합니다." msgid "Change file" msgstr "파일 변경" msgid "Change to another SVG file." msgstr "다른 .svg 파일로 변경" msgid "Forget the file path" msgstr "파일 경로 기억하지않음" msgid "" "Do NOT save local path to 3MF file.\n" "Also disables 'reload from disk' option." msgstr "" "3mf 파일에 로컬 경로를 저장하지 마십시오.\n" "또한 '디스크에서 다시 로드' 옵션을 비활성화합니다." #. TRN: An menu option to convert the SVG into an unmodifiable model part. msgid "Bake" msgstr "굽기" #. TRN: Tooltip for the menu item. msgid "Bake into model as uneditable part" msgstr "편집할 수 없는 부분으로 모델에 굽기" msgid "Save as" msgstr "다른 이름으로 저장" msgid "Save SVG file" msgstr "SVG 파일 저장" msgid "Save as SVG file." msgstr "'.svg' 파일로 저장" msgid "Size in emboss direction." msgstr "양각 방향의 크기입니다." #. TRN: The placeholder contains a number. #, boost-format msgid "Scale also changes amount of curve samples (%1%)" msgstr "규모도 곡선 샘플의 양을 변경합니다 (%1%)" msgid "Width of SVG." msgstr "SVG의 너비." msgid "Height of SVG." msgstr "SVG의 높이." msgid "Lock/unlock the aspect ratio of the SVG." msgstr "SVG의 종횡비를 잠금/잠금 해제합니다." msgid "Reset scale" msgstr "규모 재설정" msgid "Distance of the center of the SVG to the model surface." msgstr "SVG 중심에서 모델 표면까지의 거리입니다." msgid "Reset distance" msgstr "거리 재설정" msgid "Lock/unlock rotation angle when dragging above the surface." msgstr "표면 위로 드래그할 때 회전 각도를 잠금/잠금 해제합니다." msgid "Mirror vertically" msgstr "수직으로 반전" msgid "Mirror horizontally" msgstr "수평으로 반전" #. TRN: This is the name of the action that shows in undo/redo stack (changing part type from SVG to something else). msgid "Change SVG Type" msgstr "SVG 유형 변경" #. TRN - Input label. Be short as possible msgid "Mirror" msgstr "반전" msgid "Choose SVG file for emboss:" msgstr "양각을 위한 SVG 파일 선택:" #, boost-format msgid "File does NOT exist (%1%)." msgstr "파일이 존재하지 않습니다(%1%)." #, boost-format msgid "Filename has to end with \".svg\" but you selected %1%" msgstr "파일 이름은 \".svg\"로 끝나야 하지만 %1%를 선택했습니다" #, boost-format msgid "Nano SVG parser can't load from file (%1%)." msgstr "나노 SVG 파서는 파일(%1%)에서 로드할 수 없습니다." #, boost-format msgid "SVG file does NOT contain a single path to be embossed (%1%)." msgstr "SVG 파일에는 양각할 단일 경로(%1%)가 포함되어 있지 않습니다." msgid "No feature" msgstr "기능 없음" msgid "Vertex" msgstr "꼭지점" msgid "Edge" msgstr "가장자리" msgid "Plane" msgstr "평면" msgid "Point on edge" msgstr "가장자리의 점" msgid "Point on circle" msgstr "원 위의 점" msgid "Point on plane" msgstr "평면 위의 점" msgid "Center of edge" msgstr "가장자리 중심" msgid "Center of circle" msgstr "원의 중심" msgid "Select" msgstr "선택" msgid "Select point" msgstr "위치 선택" # AI Translated msgctxt "Keyboard Shortcut" msgid "Delete" msgstr "Delete" msgid "Restart selection" msgstr "다시 선택" # AI Translated msgctxt "Keyboard Shortcut" msgid "Esc" msgstr "Esc" msgid "Cancel a feature until exit" msgstr "종료할 때까지 기능 취소" msgid "Measure" msgstr "측정" msgid "Please confirm explosion ratio = 1, and please select at least one object." msgstr "폭발 비율 = 1인지 확인하고 하나 이상의 객채를 선택하십시오" msgid "Edit to scale" msgstr "규모에 맞게 편집" msgctxt "Verb" msgid "Scale all" msgstr "모두 확장" msgid "None" msgstr "없음" msgid "Diameter" msgstr "직경" msgid "Length" msgstr "길이" msgid "Selection" msgstr "선택" msgid " (Moving)" msgstr " (움직이는)" msgid "" "Select 2 faces on objects and \n" " make objects assemble together." msgstr "" "객체에서 2개의 면을 선택하고\n" " 객체를 함께 조립합니다." msgid "" "Select 2 points or circles on objects and \n" " specify distance between them." msgstr "" "객체 위의 점이나 원 2개를 선택하고\n" " 그들 사이의 거리를 지정하십시오." msgid "Face" msgstr "얼굴" msgid " (Fixed)" msgstr " (고정된)" msgid "Point" msgstr "가리키다" msgid "" "Feature 1 has been reset, \n" "feature 2 has been feature 1" msgstr "" "기능 1이 재설정되었습니다.\n" "기능 2는 기능 1이 되었습니다" msgid "Copy to clipboard" msgstr "클립보드로 복사" msgid "Perpendicular distance" msgstr "수직 거리" msgid "Distance" msgstr "거리" msgid "Direct distance" msgstr "직접적인 거리" msgid "Distance XYZ" msgstr "XYZ 거리" msgid "Parallel" msgstr "평행한" msgid "Center coincidence" msgstr "중심 일치" msgid "Feature 1" msgstr "특징 1" msgid "Reverse rotation" msgstr "역회전" msgid "Rotate around center:" msgstr "중심을 중심으로 회전:" msgid "Parallel distance:" msgstr "평행 거리:" msgid "Flip by Face 2" msgstr "면 2로 뒤집기" # AI Translated msgid "Entering Measure gizmo" msgstr "측정 변형도구 진입" # AI Translated msgid "Leaving Measure gizmo" msgstr "측정 변형도구 나가기" # AI Translated msgctxt "Assembly tool" msgid "Assemble" msgstr "조립" msgid "Please confirm explosion ratio = 1 and select at least two volumes." msgstr "분해 비율이 1인지 확인하고 최소 두 개의 볼륨을 선택하세요." msgid "Please select at least two volumes." msgstr "최소 두 개의 볼륨을 선택하세요." msgid "(Moving)" msgstr "(이동 중)" msgid "Point and point assembly" msgstr "점과 점 조립" msgid "Warning: please select two different meshes." msgstr "경고: 서로 다른 두 개의 메시를 선택하십시오." msgid "Warning: please select Plane's feature." msgstr "경고: 평면의 기능을 선택하세요." msgid "Warning: please select Point's or Circle's feature." msgstr "경고: 점 또는 원의 특징을 선택하십시오." # AI Translated msgid "" "It is recommended to assemble objects first,\n" "because they are restricted to the bed \n" "and only parts can be lifted." msgstr "" "먼저 객체를 조립하는 것이 좋습니다.\n" "객체는 베드에 고정되어 있어\n" "부품만 들어 올릴 수 있기 때문입니다." msgid "Face and face assembly" msgstr "면과 면 조립" # AI Translated msgid "Entering Assembly gizmo" msgstr "조립 변형도구 진입" # AI Translated msgid "Leaving Assembly gizmo" msgstr "조립 변형도구 나가기" msgid "Ctrl+" msgstr "Ctrl+" msgid "Alt+" msgstr "Alt+" msgid "Notice" msgstr "공지사항" msgid "Undefined" msgstr "정의되지 않음" #, boost-format msgid "%1% was replaced with %2%" msgstr "%1% 가 %2% 로 교체되었습니다" msgid "The configuration may be generated by a newer version of OrcaSlicer." msgstr "최신 버전의 OrcaSlicer에서 설정을 생성할 수 있습니다." msgid "Some values have been replaced. Please check them:" msgstr "일부 값이 변경되었습니다. 다음을 확인하세요:" msgid "Process" msgstr "프로세스" msgid "Filament" msgstr "필라멘트" msgid "Machine" msgstr "장치" msgid "The configuration package was loaded, but some values were not recognized." msgstr "구성 패키지가 로드되었지만, 일부 값이 인식되지 않았습니다." #, boost-format msgid "The configuration file “%1%” was loaded, but some values were not recognized." msgstr "구성 파일 \"%1%\"가 로드되었지만 일부 값이 인식되지 않았습니다." msgid "Loading configuration" msgstr "구성 파일 로드 중" msgid "STEP files" msgstr "STEP 파일" msgid "STL files" msgstr "STL 파일" msgid "OBJ files" msgstr "OBJ 파일" msgid "AMF files" msgstr "AMF 파일" msgid "3MF files" msgstr "3MF 파일" msgid "G-code 3MF files" msgstr "G-code 3MF 파일" msgid "G-code files" msgstr "G-code 파일" msgid "Supported files" msgstr "지원되는 파일" msgid "ZIP files" msgstr "ZIP 파일" msgid "Project files" msgstr "프로젝트 파일" msgid "Known files" msgstr "알려진 파일" msgid "INI files" msgstr "INI 파일" msgid "SVG files" msgstr "SVG 파일" msgid "Texture" msgstr "텍스처" msgid "Masked SLA files" msgstr "마스크 SLA 파일" msgid "Draco files" msgstr "Draco 파일" msgid "OrcaSlicer will terminate because of running out of memory. It may be a bug. It will be appreciated if you report the issue to our team." msgstr "메모리 부족으로 OrcaSlicer가 종료됩니다. 버그일 수 있습니다. 저희 팀에 문제를 보고해 주시면 감사하겠습니다." msgid "Fatal error" msgstr "치명적 오류" msgid "OrcaSlicer will terminate because of a localization error. It will be appreciated if you report the specific scenario this issue happened." msgstr "Orca Slicer는 현지화 오류로 인해 종료됩니다. 이 문제가 발생한 구체적인 시나리오를 보고해 주시면 감사하겠습니다." msgid "Critical error" msgstr "치명적 오류" #, boost-format msgid "OrcaSlicer got an unhandled exception: %1%" msgstr "Orca Slicer에 처리되지 않은 예외가 발생했습니다: %1%" msgid "Untitled" msgstr "제목 없음" msgid "" "Since version 2.4.0, OrcaSlicer syncs user profiles through Orca Cloud instead of Bambu Cloud.\n" "\n" "To migrate your existing profiles, log in to Orca Cloud and they will be transferred automatically. To learn more about how OrcaSlicer stores and syncs your profiles, or to migrate your presets manually, check out our wiki.\n" "\n" "If you did not use Bambu Cloud to sync profiles, this change does not affect you and you can safely ignore this message." msgstr "" "버전 2.4.0부터 OrcaSlicer는 사용자 프로파일을 Bambu Cloud 대신 Orca Cloud를 통해 동기화합니다.\n" "\n" "기존 프로파일을 이전하려면 Orca Cloud에 로그인하세요. 자동으로 전송됩니다. OrcaSlicer가 프로파일을 저장하고 동기화하는 방식에 대해 자세히 알아보거나 사전 설정을 수동으로 이전하려면 위키를 참조하세요.\n" "\n" "프로파일 동기화에 Bambu Cloud를 사용하지 않았다면 이 변경 사항은 영향을 주지 않으므로 이 메시지를 무시해도 됩니다." # AI Translated msgid "Profile syncing change" msgstr "프로필 동기화 변경" # AI Translated msgid "Learn more" msgstr "자세히 알아보기" msgid "Reloading network plug-in..." msgstr "네트워크 플러그인 재로드 중..." msgid "Downloading Network Plug-in" msgstr "네트워크 플러그인 다운로드 중" msgid "Downloading Bambu Network Plug-in" msgstr "뱀부 네트워크 플러그인 다운로드" msgid "Login information expired. Please login again." msgstr "로그인 정보가 만료되었습니다. 다시 로그인해주세요." msgid "Incorrect password" msgstr "비밀번호가 다릅니다" #, c-format, boost-format msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "%s 연결 실패! [SN:%s, code=%s]" msgid "" "Orca Slicer requires the Microsoft WebView2 Runtime to operate certain features.\n" "Click Yes to install it now." msgstr "" "Orca Slicer의 특정 기능이 작동하려면 Microsoft WebView2 Runtime이 필요합니다.\n" "지금 설치하려면 예 를 클릭하세요." msgid "WebView2 Runtime" msgstr "WebView2 런타임" # AI Translated msgid "" "The Microsoft WebView2 Runtime could not be installed.\n" "Some features, including the setup wizard, may appear blank until it is installed.\n" "Please install it manually from https://developer.microsoft.com/microsoft-edge/webview2/ and restart Orca Slicer." msgstr "" "Microsoft WebView2 Runtime을 설치할 수 없습니다.\n" "설치하기 전까지는 설정 마법사를 포함한 일부 기능이 빈 화면으로 표시될 수 있습니다.\n" "https://developer.microsoft.com/microsoft-edge/webview2/ 에서 수동으로 설치한 후 Orca Slicer를 다시 시작하십시오." #, c-format, boost-format msgid "Resources path does not exist or is not a directory: %s" msgstr "리소스 경로가 존재하지 않거나 디렉토리가 아닙니다: %s" #, c-format, boost-format msgid "" "%s\n" "Do you want to continue?" msgstr "" "%s\n" "계속하시겠습니까?" msgid "Remember my choice" msgstr "내 선택 기억" #, c-format, boost-format msgid "Click to download new version in default browser: %s" msgstr "기본 브라우저에서 새 버전을 다운로드하려면 클릭: %s" msgid "OrcaSlicer needs an update" msgstr "Orca Slicer 업그레이드가 필요합니다" msgid "This is the newest version." msgstr "최신 버전입니다." msgid "Info" msgstr "정보" # AI Translated msgid "Loading Plugins" msgstr "플러그인 로드 중" # AI Translated #, c-format, boost-format msgid "Plugin %s is no longer available." msgstr "플러그인 %s은(는) 더 이상 사용할 수 없습니다." # AI Translated #, c-format, boost-format msgid "Plugin %s access is unauthorized." msgstr "플러그인 %s에 대한 액세스 권한이 없습니다." # AI Translated msgid "Loading printer & filament profiles" msgstr "프린터 및 필라멘트 프로필 로드 중" # AI Translated msgid "Creating main window" msgstr "메인 창 생성 중" # AI Translated msgid "Loading current preset" msgstr "현재 사전 설정 로드 중" # AI Translated msgid "Showing main window" msgstr "메인 창 표시 중" msgid "" "The OrcaSlicer configuration file may be corrupted and cannot be parsed.\n" "OrcaSlicer has attempted to recreate the configuration file.\n" "Please note, application settings will be lost, but printer profiles will not be affected." msgstr "" "Orca Slicer 구성 파일이 손상되어 구문을 분석할 수 없습니다.\n" "Orca Slicer가 구성 파일을 다시 생성하려고 시도했습니다.\n" "응용 프로그램 설정은 손실되지만 프린터 사전설정은 영향을 받지 않습니다." msgid "Rebuild" msgstr "재빌드" msgid "Loading current presets" msgstr "현재 사전 설정 로드 중" msgid "Loading a mode view" msgstr "모드 보기 로드 중" msgid "Choose one file (3MF):" msgstr "하나의 파일을 선택 (3MF):" msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY):" msgstr "하나 이상의 파일 선택 (3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY):" msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF):" msgstr "하나 이상의 파일 선택 (3MF/STEP/STL/SVG/OBJ/AMF):" msgid "Choose ZIP file" msgstr "ZIP 파일 선택" msgid "Choose one file (GCODE/3MF):" msgstr "하나의 파일 선택 (GCODE/3MF):" msgid "Ext" msgstr "외부" msgid "Some presets are modified." msgstr "일부 사전 설정이 수정 되었습니다." msgid "You can keep the modified presets for the new project, discard, or save changes as new presets." msgstr "수정된 사전 설정을 새 프로젝트에 유지하거나, 변경 내용을 삭제 또는 새 사전 설정으로 저장할 수 있습니다." msgid "User logged out" msgstr "사용자가 로그아웃됨" # AI Translated msgid "You are currently in Stealth Mode. To log into the Cloud, you need to disable Stealth Mode first." msgstr "현재 스텔스 모드입니다. 클라우드에 로그인하려면 먼저 스텔스 모드를 해제해야 합니다." # AI Translated msgid "Stealth Mode" msgstr "스텔스 모드" # AI Translated msgid "Quit Stealth Mode" msgstr "스텔스 모드 종료" msgid "new or open project file is not allowed during the slicing process!" msgstr "슬라이싱 중에는 새 프로젝트를 만들거나 프로젝트 파일을 열 수 없습니다!" msgid "Open Project" msgstr "프로젝트 열기" msgid "The version of Orca Slicer is too low and needs to be updated to the latest version before it can be used normally." msgstr "Orca Slicer의 버전이 너무 낮아 최신 버전으로 업데이트해야 정상적으로 사용 가능합니다" # AI Translated msgid "Cloud sync conflict:" msgstr "클라우드 동기화 충돌:" # AI Translated #, c-format, boost-format msgid "Cloud sync conflict for preset \"%s\":" msgstr "사전 설정 \"%s\"의 클라우드 동기화 충돌:" # AI Translated msgid "" "This preset has a newer version in OrcaCloud.\n" "Pull downloads the cloud copy. Force push overwrites it with your local preset." msgstr "" "이 사전 설정은 OrcaCloud에 더 최신 버전이 있습니다.\n" "가져오기는 클라우드 사본을 다운로드합니다. 강제 푸시는 로컬 사전 설정으로 클라우드 사본을 덮어씁니다." # AI Translated msgid "" "A preset with this name already exists in OrcaCloud.\n" "Pull downloads the cloud copy. Force push overwrites it with your local preset." msgstr "" "같은 이름의 사전 설정이 이미 OrcaCloud에 있습니다.\n" "가져오기는 클라우드 사본을 다운로드합니다. 강제 푸시는 로컬 사전 설정으로 클라우드 사본을 덮어씁니다." # AI Translated msgid "" "A preset with the same name was previously deleted from the cloud.\n" "Delete will delete your local preset. Force push overwrites it with your local preset." msgstr "" "같은 이름의 사전 설정이 이전에 클라우드에서 삭제되었습니다.\n" "삭제하면 로컬 사전 설정이 삭제됩니다. 강제 푸시는 로컬 사전 설정으로 클라우드 사본을 덮어씁니다." # AI Translated msgid "" "There was an unexpected or unidentified preset conflict.\n" "Pull downloads the cloud copy. Force push overwrites it with your local preset." msgstr "" "예기치 않거나 식별할 수 없는 사전 설정 충돌이 발생했습니다.\n" "가져오기는 클라우드 사본을 다운로드합니다. 강제 푸시는 로컬 사전 설정으로 클라우드 사본을 덮어씁니다." # AI Translated msgid "" "Force push will overwrite the cloud copy with your local preset changes.\n" "Do you want to continue?" msgstr "" "강제 푸시는 로컬 사전 설정의 변경 사항으로 클라우드 사본을 덮어씁니다.\n" "계속하시겠습니까?" # AI Translated #, c-format, boost-format msgid "" "Force push will overwrite the cloud copy of preset \"%s\" with your local changes.\n" "Do you want to continue?" msgstr "" "강제 푸시는 로컬 변경 사항으로 사전 설정 \"%s\"의 클라우드 사본을 덮어씁니다.\n" "계속하시겠습니까?" # AI Translated msgid "Resolve cloud sync conflict" msgstr "클라우드 동기화 충돌 해결" # AI Translated msgid "Syncing your account…" msgstr "계정 동기화 중…" # AI Translated msgid "Migrating presets…" msgstr "사전 설정 이전 중…" # AI Translated msgid "Fetching plugins…" msgstr "플러그인 가져오는 중…" # AI Translated msgid "Loading user presets…" msgstr "사용자 사전 설정 로드 중…" msgid "Retrieving printer information, please try again later." msgstr "프린터 정보를 가져오는 중입니다. 나중에 다시 시도하세요." msgid "Please try updating OrcaSlicer and then try again." msgstr "OrcaSlicer를 업데이트한 후 다시 시도하세요." msgid "The certificate has expired. Please check the time settings or update OrcaSlicer and try again." msgstr "인증서가 만료되었습니다. 시간 설정을 확인하거나 OrcaSlicer를 업데이트하세요." msgid "The certificate is no longer valid and the printing functions are unavailable." msgstr "인증서가 더 이상 유효하지 않으며 인쇄 기능을 사용할 수 없습니다." msgid "Internal error. Please try upgrading the firmware and OrcaSlicer version. If the issue persists, contact support." msgstr "내부 오류입니다. 펌웨어와 OrcaSlicer 버전을 업그레이드하세요. 문제가 지속되면 지원팀에 문의하세요." msgid "" "To use OrcaSlicer with Bambu Lab printers, you need to enable LAN mode and Developer mode on your printer.\n" "\n" "Please go to your printer's settings and:\n" "1. Turn on LAN mode\n" "2. Enable Developer mode\n" "\n" "Developer mode allows the printer to work exclusively through local network access, enabling full functionality with OrcaSlicer." msgstr "" "OrcaSlicer에서 Bambu Lab 프린터를 사용하려면 프린터에서 LAN 모드와 개발자 모드를 활성화해야 합니다.\n" "\n" "프린터 설정에서:\n" "1. LAN 모드 켜기\n" "2. 개발자 모드 활성화\n" "\n" "개발자 모드를 사용하면 프린터가 로컬 네트워크를 통해 독점적으로 작동하여 OrcaSlicer의 전체 기능을 사용할 수 있습니다." msgid "Network Plug-in Restriction" msgstr "네트워크 플러그인 제한" msgid "Privacy Policy Update" msgstr "개인 정보 보호 정책 업데이트" # AI Translated #, c-format, boost-format msgid "your Orca Cloud profile (user ID: \"%s\")" msgstr "Orca Cloud 프로필(사용자 ID: \"%s\")" # AI Translated msgid "your default profile" msgstr "기본 프로필" # AI Translated #, c-format, boost-format msgid "a user profile (folder: \"%s\")" msgstr "사용자 프로필(폴더: \"%s\")" # AI Translated #, c-format, boost-format msgid "" "Existing user presets were found in %s.\n" "Do you want to migrate them to your OrcaCloud profile?\n" "This will copy your presets so they are available under your new account." msgstr "" "%s에서 기존 사용자 사전 설정을 찾았습니다.\n" "OrcaCloud 프로필로 이전하시겠습니까?\n" "사전 설정이 복사되어 새 계정에서도 사용할 수 있게 됩니다." # AI Translated msgid "Migrate User Presets" msgstr "사용자 사전 설정 이전" # AI Translated #, c-format, boost-format msgid "" "Failed to migrate user presets:\n" "%s" msgstr "" "사용자 사전 설정을 이전하지 못했습니다:\n" "%s" msgid "The number of user presets cached in the cloud has exceeded the upper limit, newly created user presets can only be used locally." msgstr "클라우드에 캐시된 사용자 사전 설정 수가 상한을 초과했습니다.새로 생성된 사용자 사전 설정은 로컬에서만 사용할 수 있습니다." msgid "Sync user presets" msgstr "사용자 사전 설정 동기화" # AI Translated #, c-format, boost-format msgid "The preset \"%s\" is too large to sync to the cloud (exceeds 1MB). Please reduce the preset size by removing custom configurations or use it locally only." msgstr "사전 설정 \"%s\"이(가) 너무 커서 클라우드에 동기화할 수 없습니다(1MB 초과). 사용자 정의 구성을 제거하여 사전 설정 크기를 줄이거나 로컬에서만 사용하십시오." # AI Translated #, c-format, boost-format msgid "%s updated from %s to %s" msgstr "%s이(가) %s에서 %s(으)로 업데이트되었습니다" # AI Translated #, c-format, boost-format msgid "%s has been downloaded." msgstr "%s이(가) 다운로드되었습니다." # AI Translated #, c-format, boost-format msgid "Bundle %s is no longer available." msgstr "번들 %s은(는) 더 이상 사용할 수 없습니다." # AI Translated #, c-format, boost-format msgid "Bundle %s access is unauthorized." msgstr "번들 %s에 대한 액세스 권한이 없습니다." msgid "Loading user preset" msgstr "사용자 사전 설정 로드 중" # AI Translated msgid "There is an update available. Open the preset bundle dialog to update it." msgstr "사용 가능한 업데이트가 있습니다. 사전 설정 번들 대화 상자를 열어 업데이트하십시오." # AI Translated #, c-format, boost-format msgid "%s has been removed." msgstr "%s이(가) 제거되었습니다." msgid "Switching application language" msgstr "응용 프로그램 언어 전환" msgid "Select the language" msgstr "언어 선택" msgid "Language" msgstr "언어" # AI Translated #, c-format, boost-format msgid "Switching Orca Slicer to language %s failed." msgstr "Orca Slicer의 언어를 %s(으)로 전환하지 못했습니다." # AI Translated msgid "" "\n" "You may need to reconfigure the missing locales, likely by running the \"locale-gen\" and \"dpkg-reconfigure locales\" commands.\n" msgstr "" "\n" "누락된 로캘을 다시 구성해야 할 수 있습니다. 일반적으로 \"locale-gen\" 및 \"dpkg-reconfigure locales\" 명령을 실행하면 됩니다.\n" # AI Translated msgid "Orca Slicer - Switching language failed" msgstr "Orca Slicer - 언어 전환 실패" msgid "*" msgstr "*" # AI Translated msgid "Plugins" msgstr "플러그인" # AI Translated #, c-format, boost-format msgid "" "Failed to open the Plugins dialog:\n" "%s" msgstr "" "플러그인 대화 상자를 열지 못했습니다:\n" "%s" # AI Translated msgid "Failed to open the Plugins dialog (unknown error)." msgstr "플러그인 대화 상자를 열지 못했습니다(알 수 없는 오류)." # AI Translated msgid "Plugin Terminal" msgstr "플러그인 터미널" msgid "Changing application language" msgstr "응용 프로그램 언어 변경" msgid "The uploads are still ongoing" msgstr "업로드가 계속 진행 중입니다" msgid "Stop them and continue anyway?" msgstr "중지하고 계속하시겠습니까?" msgid "Ongoing uploads" msgstr "진행 중인 업로드" msgid "Select a G-code file:" msgstr "Gcode 파일 선택:" msgid "Could not start URL download. Destination folder is not set. Please choose destination folder in Configuration Wizard." msgstr "URL 다운로드를 시작할 수 없습니다. 대상 폴더가 설정되지 않았습니다. 구성 마법사에서 대상 폴더를 선택하세요." msgid "Import File" msgstr "파일 가져오기" msgid "Delete" msgstr "삭제" msgid "Choose files" msgstr "파일 선택" msgid "New Folder" msgstr "새 폴더" msgid "Open" msgstr "열기" msgid "Rename" msgstr "이름 변경" msgid "Orca Slicer GUI initialization failed" msgstr "Orca Slicer GUI 초기화 실패" #, boost-format msgid "Fatal error, exception: %1%" msgstr "치명적 오류, 예외 발견: %1%" msgid "Quality" msgstr "품질" msgid "Shell" msgstr "쉘" msgid "Infill" msgstr "채우기" msgid "Support" msgstr "서포트" msgid "Flush options" msgstr "버리기 옵션" msgid "Speed" msgstr "속도" msgid "Strength" msgstr "강도" msgid "Top solid layers" msgstr "상부 꽉찬 레이어" msgid "Top minimum shell thickness" msgstr "상단 최소 쉘 두께" msgid "Top Surface Density" msgstr "상단 표면 밀도" msgid "Bottom solid layers" msgstr "하단 꽉찬 레이어" msgid "Bottom minimum shell thickness" msgstr "하단 최소 쉘 두께" msgid "Bottom Surface Density" msgstr "하단 표면 밀도" msgid "Ironing" msgstr "다림질" msgid "Fuzzy skin" msgstr "퍼지 스킨" msgid "Extruders" msgstr "압출기" msgid "Extrusion width" msgstr "압출 너비" msgid "Wipe options" msgstr "노즐 청소 옵션" msgid "Bed adhesion" msgstr "베드 안착" msgid "Add Part" msgstr "부품 추가" msgid "Add Negative Part" msgstr "비우기 부품 추가" msgid "Add Modifier" msgstr "수정자 추가" msgid "Add Support Blocker" msgstr "서포트 차단기 추가" msgid "Add Support Enforcer" msgstr "서포트 강제기 추가" msgid "Add text" msgstr "텍스트 추가" msgid "Add negative text" msgstr "텍스트 제외 추가" msgid "Add text modifier" msgstr "텍스트 수정자 추가" msgid "Add SVG part" msgstr "SVG 부분 추가" msgid "Add negative SVG" msgstr "SVG 제외 추가" msgid "Add SVG modifier" msgstr "SVG 수정자 추가" msgid "Select settings" msgstr "설정 선택" msgid "Hide" msgstr "숨기기" msgid "Show" msgstr "보이기" # AI Translated msgctxt "Keyboard Shortcut" msgid "Del" msgstr "Del" msgid "Delete the selected object" msgstr "선택된 객체 삭제" # AI Translated msgctxt "Keyboard Shortcut" msgid "Backspace" msgstr "Backspace" msgid "Load..." msgstr "불러오기..." msgid "Cube" msgstr "정육면체" msgid "Cylinder" msgstr "원기둥" msgid "Cone" msgstr "원뿔" msgid "Disc" msgstr "디스크" msgid "Torus" msgstr "토러스" msgid "Orca Cube" msgstr "Orca 큐브" # AI Translated msgid "OrcaSliced Combo" msgstr "OrcaSliced Combo" # AI Translated msgid "Orca Badge" msgstr "Orca Badge" msgid "Orca Tolerance Test" msgstr "Orca 공차 테스트" msgid "3DBenchy" msgstr "3D 벤치" msgid "Cali Cat" msgstr "Cali Cat" msgid "Autodesk FDM Test" msgstr "Autodesk FDM 테스트" msgid "Voron Cube" msgstr "보론 큐브" msgid "Stanford Bunny" msgstr "스탠포드 버니" msgid "Orca String Hell" msgstr "Orca 스트링 지옥" msgid "" "This model features text embossment on the top surface. For optimal results, it is advisable to set the 'One Wall Threshold (min_width_top_surface)' to 0 for the 'Only One Wall on Top Surfaces' to work best.\n" "Yes - Change these settings automatically\n" "No - Do not change these settings for me" msgstr "" "이 모델은 상단 표면에 텍스트 엠보싱이 있습니다. 최적의 결과를 얻으려면 '상단 표면의 한 벽만'에 대해 '한 벽 임계값(min_width_top_surface)'을 0으로 설정하는 것이 가장 좋습니다.\n" "예 - 이 설정을 자동으로 변경합니다\n" "아니요 - 이 설정을 변경하지 않음" msgid "Suggestion" msgstr "제안" msgid "Text" msgstr "텍스트" msgid "Height Range Modifier" msgstr "높이 범위 수정자" msgid "Add Settings" msgstr "설정 추가" msgid "Change Type" msgstr "유형 변경" msgid "Negative Part" msgstr "비우기 부품" msgid "Support Blocker" msgstr "서포트 차단기" msgid "Support Enforcer" msgstr "서포트 강제기" msgid "Change part type" msgstr "부품 유형 변경" msgid "Set as An Individual Object" msgstr "개별 객체로 설정" msgid "Set as Individual Objects" msgstr "개별 객체로 설정" msgid "Fill bed with copies" msgstr "베드에 복사본으로 채우기" msgid "Fill the remaining area of bed with copies of the selected object" msgstr "베드의 나머지 영역을 선택한 객체의 복사본으로 채웁니다" msgid "Printable" msgstr "출력 가능" # AI Translated msgid "Auto Drop" msgstr "자동 내려놓기" # AI Translated msgid "Automatically drops the selected object to the build plate." msgstr "선택한 객체를 빌드 플레이트로 자동으로 내려놓습니다." msgid "Fix Model" msgstr "모델 수리" msgid "Export as one STL" msgstr "하나의 STL로 내보내기" msgid "Export as STLs" msgstr "여러 STL로 내보내기" msgid "Export as one DRC" msgstr "하나의 DRC로 내보내기" msgid "Export as DRCs" msgstr "DRC로 내보내기" msgid "Reload from disk" msgstr "디스크에서 다시 불러오기" msgid "Reload the selected parts from disk" msgstr "선택한 부품을 디스크에서 다시 불러오기" msgid "Replace 3D file" msgstr "3D 파일 교체" msgid "Replace the selected part with a new 3D file" msgstr "선택한 파트를 새 3D 파일로 교체" msgid "Replace all with 3D files" msgstr "모든 파트를 3D 파일로 교체" msgid "Replace all selected parts with 3D files from folder" msgstr "선택한 모든 파트를 폴더의 3D 파일로 교체" msgid "Change filament" msgstr "필라멘트 변경" msgid "Set filament for selected items" msgstr "선택한 항목의 필라멘트로 설정" msgid "Default" msgstr "기본값" #, c-format, boost-format msgid "Filament %d" msgstr "필라멘트 %d" msgid "current" msgstr "현재" msgid "Scale to build volume" msgstr "출력 가능 영역에 맞게 확장" msgid "Scale an object to fit the build volume" msgstr "출력 가능 영역에 맞게 객체 크기 조정" msgid "Flush Options" msgstr "버리기 옵션" msgid "Flush into objects' infill" msgstr "객체의 채우기에서 버리기" msgid "Flush into this object" msgstr "객체에서 버리기" msgid "Flush into objects' support" msgstr "객체의 서포트에서 버리기" msgid "Edit in Parameter Table" msgstr "객체/부품 설정에서 편집" msgid "Convert from Inches" msgstr "인치에서 변환" msgid "Restore to Inch" msgstr "인치로 복원" msgid "Convert from Meters" msgstr "미터에서 변환" msgid "Restore to Meter" msgstr "미터로 복원" msgid "Assemble" msgstr "병합" msgid "Assemble the selected objects into an object with multiple parts" msgstr "선택한 객체를 여러 부품이 있는 객체로 조립" msgid "Assemble the selected objects into an object with single part" msgstr "선택한 객체를 단일 부품이 있는 객체로 조립" msgid "Mesh boolean" msgstr "메시 합집합/차집합/교집합" msgid "Mesh boolean operations including union and subtraction" msgstr "합집합과 차집합을 포함한 메시 부울 연산" msgid "Along X Axis" msgstr "X축" msgid "Mirror along the X Axis" msgstr "X축을 따라 반전" msgid "Along Y Axis" msgstr "Y축" msgid "Mirror along the Y Axis" msgstr "Y축을 따라 반전" msgid "Along Z Axis" msgstr "Z축" msgid "Mirror along the Z Axis" msgstr "Z축을 따라 반전" msgid "Mirror object" msgstr "객체 반전" msgid "Edit text" msgstr "텍스트 편집" msgid "Ability to change text, font, size, ..." msgstr "텍스트, 글꼴, 크기 등을 변경하는 기능..." msgid "Edit SVG" msgstr "SVG 편집" msgid "Change SVG source file, projection, size, ..." msgstr "SVG 소스 파일, 투영, 크기 변경..." msgid "Invalidate cut info" msgstr "잘못된 잘라내기 정보" msgid "Add Primitive" msgstr "기본 모델 추가" msgid "Add Handy models" msgstr "핸디 모델 추가" msgid "Add Models" msgstr "모델 추가" msgid "Show Labels" msgstr "이름표 보기" msgid "To Objects" msgstr "객체로" msgid "Split the selected object into multiple objects" msgstr "선택한 객체를 여러 객체로 분할" msgid "To Parts" msgstr "부품으로" msgid "Split the selected object into multiple parts" msgstr "선택한 객체를 여러 부품으로 분할" msgid "Split" msgstr "분할" msgid "Split the selected object" msgstr "선택한 객체 분할" msgid "Auto orientation" msgstr "자동 방향 지정" msgid "Auto orient the object to improve print quality" msgstr "객체의 방향을 자동으로 지정하여 출력 품질을 향상시킵니다." msgid "Edit" msgstr "편집" msgid "Merge with" msgstr "병합" msgid "Delete this filament" msgstr "이 필라멘트 삭제" msgid "Select All" msgstr "모두 선택" msgid "Select all objects on the current plate" msgstr "현재 플레이트의 모든 객체 선택" msgid "Select All Plates" msgstr "모든 플레이트 선택" msgid "Select all objects on all plates" msgstr "모든 플레이트의 모든 객체 선택" msgid "Delete All" msgstr "모두 삭제" msgid "Delete all objects on the current plate" msgstr "현재 플레이트의 모든 객체 삭제" msgid "Arrange" msgstr "정렬" msgid "Arrange current plate" msgstr "현재 플레이트 정렬" msgid "Reload All" msgstr "모두 다시 불러오기" msgid "Reload all from disk" msgstr "디스크에서 모두 다시 로드" msgid "Auto Rotate" msgstr "자동 회전" msgid "Auto rotate current plate" msgstr "현재 플레이트 자동 정렬" msgid "Delete Plate" msgstr "플레이트 삭제" msgid "Remove the selected plate" msgstr "선택된 플레이트 삭제" msgid "Add instance" msgstr "인스턴스 추가" msgid "Add one more instance of the selected object" msgstr "선택한 객체의 인스턴스를 하나 더 추가" msgid "Remove instance" msgstr "인스턴스 제거" msgid "Remove one instance of the selected object" msgstr "선택한 객체의 인스턴스 하나를 제거" msgid "Set number of instances" msgstr "인스턴스 수 설정" msgid "Change the number of instances of the selected object" msgstr "선택한 객체의 인스턴스 수 변경" msgid "Fill bed with instances" msgstr "베드를 인스턴스로 채우기" msgid "Fill the remaining area of bed with instances of the selected object" msgstr "선택한 객체의 인스턴스로 베드의 남은 영역 채우기" msgid "Clone" msgstr "복제" msgid "Simplify Model" msgstr "모델 단순화" msgid "Subdivision mesh" msgstr "서브디비전 메쉬" msgid "(Lost color)" msgstr "(색상 손실)" msgid "Center" msgstr "중앙" msgid "Drop" msgstr "내리기" msgid "Edit Process Settings" msgstr "프로세스 설정에서 편집" msgid "Copy Process Settings" msgstr "프로세스 설정 복사" msgid "Paste Process Settings" msgstr "프로세스 설정 붙여넣기" msgid "Edit print parameters for a single object" msgstr "단일 객체에 대한 출력 매개변수 편집" msgid "Change Filament" msgstr "필라멘트 변경" msgid "Set Filament for selected items" msgstr "선택한 항목의 필라멘트로 설정" # AI Translated msgid "Automatically snaps the selected object to the build plate." msgstr "선택한 객체를 빌드 플레이트에 자동으로 맞춥니다." msgid "Unlock" msgstr "잠금 해제" msgid "Lock" msgstr "잠금" msgid "Edit Plate Name" msgstr "플레이트 이름 편집" msgid "Name" msgstr "이름" msgid "Fila." msgstr "필라멘트." #, c-format, boost-format msgid "%1$d error repaired" msgid_plural "%1$d errors repaired" msgstr[0] "%1$d 오류 수정됨" #, c-format, boost-format msgid "Error: %1$d non-manifold edge." msgid_plural "Error: %1$d non-manifold edges." msgstr[0] "오류: %1$d 비 다양체 가장자리." msgid "Remaining errors" msgstr "남은 오류" #, c-format, boost-format msgid "%1$d non-manifold edge" msgid_plural "%1$d non-manifold edges" msgstr[0] "%1$d 비다양체 가장자리" msgid "Click the icon to repair model object" msgstr "아이콘을 클릭하여 모델 객체를 수리하세요" msgid "Right click the icon to drop the object settings" msgstr "아이콘을 마우스 우클릭하여 객체 설정을 드롭합니다" msgid "Click the icon to reset all settings of the object" msgstr "아이콘을 클릭하여 객체의 모든 설정을 초기화합니다" msgid "Right click the icon to drop the object printable property" msgstr "아이콘을 마우스 우클릭하여 객체 출력 가능 속성을 드롭합니다" msgid "Click the icon to toggle printable properties of the object" msgstr "아이콘을 쿨릭하여 객체의 출력 가능한 속성을 전환합니다" msgid "Click the icon to edit support painting of the object" msgstr "아이콘을 클릭하여 객체의 서포트 칠하기를 편집합니다" msgid "Click the icon to edit color painting for the object" msgstr "아이콘을 클릭하여 객체의 색상 칠하기를 편집합니다" msgid "Click the icon to shift this object to the bed" msgstr "아이콘을 클릭하여 이 객체를 베드로 옮깁니다" # AI Translated msgid "Rename Object" msgstr "객체 이름 변경" # AI Translated msgid "Rename Part" msgstr "부품 이름 변경" # AI Translated msgid "Paste settings" msgstr "설정 붙여넣기" # AI Translated msgid "Shift objects to bed" msgstr "객체를 베드로 이동" # AI Translated msgid "Object order changed" msgstr "객체 순서 변경됨" # AI Translated msgid "Layer setting added" msgstr "레이어 설정 추가됨" # AI Translated msgid "Part setting added" msgstr "부품 설정 추가됨" # AI Translated msgid "Object setting added" msgstr "객체 설정 추가됨" # AI Translated msgid "Height range settings added" msgstr "높이 범위 설정 추가됨" # AI Translated msgid "Part settings added" msgstr "부품 설정 추가됨" # AI Translated msgid "Object settings added" msgstr "객체 설정 추가됨" # AI Translated msgid "Load Part" msgstr "부품 불러오기" # AI Translated msgid "Load Modifier" msgstr "수정자 불러오기" msgid "Loading file" msgstr "파일 로딩 중" msgid "Error!" msgstr "오류!" msgid "Failed to get the model data in the current file." msgstr "현재 파일에서 모델의 데이터를 가져오지 못했습니다." # AI Translated msgid "Add primitive" msgstr "기본 모델 추가" msgid "Generic" msgstr "일반" msgid "Switch to per-object setting mode to edit modifier settings." msgstr "객체별 설정 모드로 전환하여 수정자 설정을 편집합니다." msgid "Switch to per-object setting mode to edit process settings of selected objects." msgstr "객체별 설정 모드로 전환하여 선택한 객체의 프로세스 설정을 편집합니다." msgid "Remove paint-on fuzzy skin" msgstr "칠한 퍼지 스킨 제거" # AI Translated msgid "Delete Settings" msgstr "설정 삭제" msgid "Remove height range" msgstr "높이 범위 제거" msgid "Delete connector from object which is a part of cut" msgstr "잘라내기의 일부인 객체에서 커넥터 삭제" msgid "Delete solid part from object which is a part of cut" msgstr "잘라내기의 일부인 객체에서 꽉찬 부품 삭제" msgid "Delete negative volume from object which is a part of cut" msgstr "잘라내기의 일부인 객체에서 음수 비우기 용량 삭제" msgid "To save cut correspondence you can delete all connectors from all related objects." msgstr "잘라내기 연결을 저장하기 위해 모든 관련 객체에서 모든 커넥터를 삭제할 수 있습니다." msgid "" "This action will break a cut correspondence.\n" "After that, model consistency can't be guaranteed.\n" "\n" "To manipulate with solid parts or negative volumes you have to invalidate cut information first." msgstr "" "이 조치는 잘라내기 연결을 끊습니다.\n" "그 이후에는 모델 일관성을 보장할 수 없습니다.\n" "\n" "꽉찬 부품 또는 비우기 부피로 조작하려면 먼저 잘라내기 정보를 무효화해야 합니다." msgid "Delete all connectors" msgstr "모든 커넥터 삭제" msgid "Deleting the last solid part is not allowed." msgstr "마지막 꽉찬 부품을 삭제할 수 없습니다." # AI Translated msgid "Delete part" msgstr "부품 삭제" msgid "The target object contains only one part and can not be split." msgstr "대상 객체에는 파트가 하나뿐이며 분할할 수 없습니다." msgid "Split to parts" msgstr "부품으로 분할" msgid "Assembly" msgstr "조립" # AI Translated msgid "Merge parts to an object" msgstr "부품을 하나의 객체로 병합" # AI Translated msgid "Add layers" msgstr "레이어 추가" msgid "Cut Connectors information" msgstr "잘라내기 커넥터 정보" msgid "Object manipulation" msgstr "객체 조작" msgid "Group manipulation" msgstr "그룹 조작" msgid "Object Settings to Modify" msgstr "수정할 객체 설정" msgid "Part Settings to Modify" msgstr "수정할 부품 설정" msgid "Layer Range Settings to Modify" msgstr "수정할 레이어 범위 설정" msgid "Part manipulation" msgstr "부품 조작" msgid "Instance manipulation" msgstr "인스턴스 조작" msgid "Height ranges" msgstr "높이 범위" msgid "Settings for height range" msgstr "높이 범위 설정" # AI Translated msgid "Delete selected" msgstr "선택 항목 삭제" msgid "Layer" msgstr "레이어" msgid "Selection conflicts" msgstr "선택 출돌함" msgid "If the first selected item is an object, the second should also be an object." msgstr "첫 번째로 선택한 항목이 객체이면 두 번째 항목도 객체여야 합니다." msgid "If the first selected item is a part, the second should be a part in the same object." msgstr "첫 번째로 선택한 항목이 부품이면 두 번째 항목은 동일한 객체의 부품이어야 합니다." # AI Translated msgid "The type of the last solid object part cannot be changed." msgstr "마지막 꽉찬 객체 부품의 유형은 변경할 수 없습니다." msgid "Type:" msgstr "유형:" msgid "Choose part type" msgstr "부품 유형 선택" # AI Translated msgid "Instances to Separated Objects" msgstr "인스턴스를 개별 객체로" msgid "Enter new name" msgstr "새 이름 입력" msgid "Renaming" msgstr "이름 변경 중" msgid "The following model object has been repaired" msgid_plural "The following model objects have been repaired" msgstr[0] "다음 모델 객체가 수리되었습니다" msgid "Failed to repair the following model object" msgid_plural "Failed to repair the following model objects" msgstr[0] "다음 모델 객체 교정을 실패하였습니다" msgid "Repairing was canceled" msgstr "수리가 취소되었습니다" #, c-format, boost-format msgid "\"%s\" will exceed 1 million faces after this subdivision, which may increase slicing time. Do you want to continue?" msgstr "\"%s\"은(는) 이 서브디비전 후 100만 면을 초과하여 슬라이싱 시간이 증가할 수 있습니다. 계속하시겠습니까?" #, c-format, boost-format msgid "\"%s\" part's mesh contains errors. Please repair it first." msgstr "\"%s\" 파트의 메쉬에 오류가 있습니다. 먼저 수리하세요." # AI Translated msgid "Change Filaments" msgstr "필라멘트 변경" msgid "Additional process preset" msgstr "추가 프로세스 사전 설정" msgid "Remove parameter" msgstr "매개 변수 제거" msgid "to" msgstr "으로" msgid "Add height range" msgstr "높이 범위 추가" msgid "Invalid numeric." msgstr "잘못된 숫자입니다." msgid "One cell can only be copied to one or more cells in the same column." msgstr "하나의 셀은 동일한 열에 있는 하나 이상의 셀에만 복사할 수 있습니다" msgid "Copying multiple cells is not supported." msgstr "다중 셀 복사는 지원되지 않습니다" msgid "Outside" msgstr "외부" msgid "Layer height" msgstr "레이어 높이" msgid "Wall loops" msgstr "벽 루프" msgid "Infill density(%)" msgstr "채우기 밀도(%)" msgid "Auto Brim" msgstr "자동 브림" msgid "Mouse ear" msgstr "생쥐 귀" msgid "Painted" msgstr "칠해짐" msgid "Outer brim only" msgstr "외부 브림만" msgid "Inner brim only" msgstr "내부 브림만" msgid "Outer and inner brim" msgstr "내부와 외부 브림" msgid "No-brim" msgstr "사용안함" msgid "Outer wall speed" msgstr "외벽 속도" msgid "Plate" msgstr "플레이트" msgid "Brim" msgstr "브림" # AI Translated msgid "Object/Part Settings" msgstr "객체/부품 설정" msgid "Reset parameter" msgstr "매개변수 초기화" msgid "Multicolor Print" msgstr "멀티컬러 출력" msgid "Line Type" msgstr "선 유형" #, c-format, boost-format msgid "1x1 Grid: %d mm" msgstr "1x1 그리드: %d mm" msgid "More" msgstr "더보기" msgid "Open Preferences" msgstr "기본 설정 열기." msgid "Open next tip" msgstr "다음 팁 열기." msgid "Open documentation in web browser" msgstr "웹 브라우저에서 문서 열기." msgid "Color" msgstr "색상" msgid "Pause" msgstr "일시 정지" msgid "Template" msgstr "탬플릿" msgid "Custom" msgstr "사용자 정의" msgid "Pause:" msgstr "일시 정지:" msgid "Custom Template:" msgstr "사용자 정의 템플릿:" msgid "Custom G-code:" msgstr "사용자 정의 Gcode:" msgid "Custom G-code" msgstr "사용자 정의 Gcode" msgid "Enter Custom G-code used on current layer:" msgstr "현재 레이어에 사용될 사용자 정의 Gcode 입력:" msgid "Jump to layer" msgstr "다음 레이어로 이동" msgid "Please enter the layer number." msgstr "레이어 번호를 입력하세요" msgid "Add Pause" msgstr "일시 정지 추가" msgid "Insert a pause command at the beginning of this layer." msgstr "이 레이어의 시작 부분에 일시 정지 명령을 삽입합니다." msgid "Add Custom G-code" msgstr "사용자 정의 Gcode 추가" msgid "Insert custom G-code at the beginning of this layer." msgstr "이 레이어의 시작 부분에 사용자 정의 Gcode를 삽입합니다." msgid "Add Custom Template" msgstr "사용자 정의 템플릿 추가" msgid "Insert template custom G-code at the beginning of this layer." msgstr "이 레이어의 시작 부분에 사용자 정의 템플릿 Gcode를 삽입합니다." msgid "Filament " msgstr "필라멘트 " msgid "Change filament at the beginning of this layer." msgstr "이 레이어의 시작 부분에서 필라멘트를 변경합니다." msgid "Delete Pause" msgstr "일시 정지 삭제" msgid "Delete Custom Template" msgstr "사용자 정의 템플릿 삭제" msgid "Edit Custom G-code" msgstr "사용자 정의 Gcode 편집" msgid "Delete Custom G-code" msgstr "사용자 정의 Gcode 삭제" msgid "Delete Filament Change" msgstr "필라멘트 변경 삭제" msgid "No printer" msgstr "프린터 없음" msgid "..." msgstr "..." msgid "Failed to connect to the server" msgstr "서버 연결 실패" msgid "Check the status of current system services" msgstr "현재 시스템 서비스 상태 확인" msgid "code" msgstr "코드" msgid "Failed to connect to cloud service" msgstr "클라우드 서비스에 연결하지 못했습니다" msgid "Please click on the hyperlink above to view the cloud service status" msgstr "클라우드 서비스 상태를 보려면 위의 하이퍼링크를 클릭하세요" msgid "Failed to connect to the printer" msgstr "프린터 연결 실패" msgid "Connection to printer failed" msgstr "프린터 연결 실패" msgid "Please check the network connection of the printer and Orca." msgstr "프린터와 Orca Slicer의 네트워크 연결을 확인하세요." msgid "Connecting..." msgstr "연결 중..." msgid "Auto Refill" msgstr "자동 리필" msgid "Load" msgstr "불러오기" msgid "Unload" msgstr "언로드" msgid "Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically load or unload filament." msgstr "AMS 슬롯을 선택한 다음 '로드' 또는 '언로드' 버튼을 누르면 필라멘트를 자동으로 로드하거나 언로드할 수 있습니다." msgid "Filament type is unknown which is required to perform this action. Please set target filament's informations." msgstr "이 작업에 필요한 필라멘트 유형이 알 수 없습니다. 대상 필라멘트 정보를 설정하세요." # AI Translated msgid "AMS has not been initialized. Please initialize it before use." msgstr "AMS가 초기화되지 않았습니다. 사용하기 전에 초기화하십시오." msgid "Changing fan speed during printing may affect print quality, please choose carefully." msgstr "인쇄 중 팬 속도를 변경하면 인쇄 품질에 영향을 줄 수 있습니다. 신중하게 선택하세요." msgid "Change Anyway" msgstr "변경" msgid "Off" msgstr "끄기" msgid "Filter" msgstr "필터" msgid "Enabling filtration redirects the right fan to filter gas, which may reduce cooling performance." msgstr "필터링을 활성화하면 오른쪽 팬이 가스 필터링으로 전환되어 냉각 성능이 저하될 수 있습니다." msgid "Enabling filtration during printing may reduce cooling and affect print quality. Please choose carefully." msgstr "인쇄 중 필터링을 활성화하면 냉각이 감소하고 인쇄 품질에 영향을 줄 수 있습니다. 신중하게 선택하세요." msgid "The selected material only supports the current fan mode, and it can't be changed during printing." msgstr "선택한 재료는 현재 팬 모드만 지원하며 인쇄 중에는 변경할 수 없습니다." msgid "Cooling" msgstr "냉각" msgid "Heating" msgstr "가열" msgid "Exhaust" msgstr "배기" msgid "Full Cooling" msgstr "완전 냉각" msgid "Init" msgstr "초기화" msgid "Chamber" msgstr "챔버" msgid "Innerloop" msgstr "내부 순환" msgid "Top" msgstr "위" msgid "The fan controls the temperature during printing to improve print quality. The system automatically adjusts the fan's switch and speed according to different printing materials." msgstr "팬은 인쇄 중 온도를 제어하여 인쇄 품질을 향상시킵니다. 시스템은 인쇄 재료에 따라 팬의 스위치와 속도를 자동으로 조정합니다." msgid "Cooling mode is suitable for printing PLA/PETG/TPU materials and filters the chamber air." msgstr "냉각 모드는 PLA/PETG/TPU 재료 인쇄에 적합하며 챔버 공기를 필터링합니다." msgid "Heating mode is suitable for printing ABS/ASA/PC/PA materials and circulates filters the chamber air." msgstr "가열 모드는 ABS/ASA/PC/PA 재료 인쇄에 적합하며 챔버 공기를 순환 필터링합니다." msgid "Strong cooling mode is suitable for printing PLA/TPU materials. In this mode, the printouts will be fully cooled." msgstr "강력 냉각 모드는 PLA/TPU 재료 인쇄에 적합합니다. 이 모드에서는 출력물이 완전히 냉각됩니다." msgid "Cooling mode is suitable for printing PLA/PETG/TPU materials." msgstr "냉각 모드는 PLA/PETG/TPU 재료 인쇄에 적합합니다." msgctxt "air_duct" msgid "Right(Aux)" msgstr "오른쪽(보조)" msgctxt "air_duct" msgid "Right(Filter)" msgstr "오른쪽(필터)" msgctxt "air_duct" msgid "Left(Aux)" msgstr "왼쪽(보조)" # AI Translated msgctxt "Hotend Heat Breaker Fan" msgid "Hotend" msgstr "핫엔드" msgid "Parts" msgstr "파트" msgid "Aux" msgstr "보조" msgid "Nozzle1" msgstr "노즐1" msgid "MC Board" msgstr "MC 보드" msgid "Heat" msgstr "가열" msgid "Fan" msgstr "팬" msgid "Idling..." msgstr "대기 중..." msgid "Heat the nozzle" msgstr "노즐 가열" msgid "Cut filament" msgstr "필라멘트 자르기" msgid "Pull back the current filament" msgstr "현재 필라멘트를 뒤로 당깁니다" msgid "Push new filament into extruder" msgstr "새로운 필라멘트를 압출기에 밀어 넣습니다" msgid "Grab new filament" msgstr "새 필라멘트 가져오기" msgid "Purge old filament" msgstr "오래된 필라멘트 제거" msgid "Confirm extruded" msgstr "압출 확인" msgid "Check filament location" msgstr "필라멘트 위치 확인" # AI Translated msgid "Switch" msgstr "전환" # AI Translated msgid "hotend" msgstr "핫엔드" # AI Translated msgid "Wait for AMS cooling" msgstr "AMS 냉각 대기" # AI Translated msgid "Switch current filament at Filament Track Switch" msgstr "Filament Track Switch에서 현재 필라멘트 전환" # AI Translated msgid "Pull back current filament at Filament Track Switch" msgstr "Filament Track Switch에서 현재 필라멘트 되감기" # AI Translated msgid "Switch track at Filament Track Switch" msgstr "Filament Track Switch에서 트랙 전환" msgid "The maximum temperature cannot exceed " msgstr "최대 온도는 다음 값을 초과할 수 없습니다 " msgid "The minmum temperature should not be less than " msgstr "최소 온도는 다음 값보다 낮아서는 안 됩니다 " # AI Translated msgid "Type to filter..." msgstr "입력하여 필터링..." msgid "All" msgstr "모두" # AI Translated msgid "No selected items..." msgstr "선택된 항목 없음..." # AI Translated msgid "All items selected..." msgstr "모든 항목이 선택됨..." # AI Translated msgid "No matching items..." msgstr "일치하는 항목 없음..." msgid "Deselect All" msgstr "모두 선택 해제" # AI Translated msgid "Select visible" msgstr "표시된 항목 선택" # AI Translated msgid "Deselect visible" msgstr "표시된 항목 선택 해제" # AI Translated msgid "Filter selected" msgstr "선택된 항목 필터링" # AI Translated msgid "Filter nonSelected" msgstr "선택되지 않은 항목 필터링" # AI Translated msgid "Simple settings" msgstr "간단 설정" msgid "Advanced settings" msgstr "고급 설정" # AI Translated msgid "Expert settings" msgstr "전문가 설정" msgid "Developer mode" msgstr "개발자 모드" # AI Translated msgid "Launch troubleshoot center" msgstr "문제 해결 센터 실행" # AI Translated msgid "Set nozzle count" msgstr "노즐 개수 설정" msgid "Please set nozzle count" msgstr "노즐 수를 설정하세요" msgid "Error: Can not set both nozzle count to zero." msgstr "오류: 노즐 수를 둘 다 0으로 설정할 수 없습니다." #, c-format, boost-format msgid "Error: Nozzle count can not exceed %d." msgstr "오류: 노즐 수는 %d을 초과할 수 없습니다." msgid "Confirm" msgstr "확인" msgid "Extruder" msgstr "압출기" msgid "Nozzle Selection" msgstr "노즐 선택" msgid "Available Nozzles" msgstr "사용 가능한 노즐" msgid "Nozzle Info" msgstr "노즐 정보" msgid "Sync Nozzle status" msgstr "노즐 상태 동기화" msgid "Caution: Mixing nozzle diameters in one print is not supported. If the selected size is only on one extruder, single-extruder printing will be enforced." msgstr "주의: 한 번에 여러 노즐 직경을 혼합하여 출력하는 것은 지원되지 않습니다. 선택한 크기가 압출기 하나에만 있는 경우, 단일 압출기 출력이 적용됩니다." #, c-format, boost-format msgid "Refresh %d/%d..." msgstr "새로 고침 %d/%d..." msgid "Unknown nozzle detected. Refresh to update info (unrefreshed nozzles will be excluded during slicing). Verify nozzle diameter & flow rate against displayed values." msgstr "알 수 없는 노즐이 감지되었습니다. 정보를 업데이트하려면 새로 고침하세요(새로 고침되지 않은 노즐은 슬라이싱 과정에서 제외됩니다). 표시된 값과 노즐 직경 및 유량을 확인하세요." msgid "Unknown nozzle detected. Refresh to update (unrefreshed nozzles will be skipped in slicing)." msgstr "알 수 없는 노즐이 감지되었습니다. 새로 고침하여 업데이트하세요(새로 고침되지 않은 노즐은 슬라이싱 시 건너뜁니다)." msgid "Please confirm whether the required nozzle diameter and flow rate match the currently displayed values." msgstr "필요한 노즐 직경과 유량이 현재 표시된 값과 일치하는지 확인하세요." msgid "Your printer has different nozzles installed. Please select a nozzle for this print." msgstr "프린터에 여러 개의 노즐이 설치되어 있습니다. 이 출력에 맞는 노즐을 선택하세요." msgid "Ignore" msgstr "무시" # AI Translated msgid "Done." msgstr "완료되었습니다." msgid "" "All the selected objects are on a locked plate.\n" "Cannot auto-arrange these objects." msgstr "" "선택한 모든 물체는 잠긴 플레이트에 있습니다,\n" "이러한 객체에 대해 자동 정렬을 수행할 수 없습니다." msgid "No arrangeable objects are selected." msgstr "정렬 가능한 객체를 선택하지 않았습니다." msgid "" "This plate is locked.\n" "Cannot auto-arrange on this plate." msgstr "" "이 플레이트는 잠겨 있습니다,\n" "이 플레이트에서 자동 정렬을 할 수 없습니다." msgid "Arranging..." msgstr "정렬 중..." msgid "Arranging" msgstr "정렬 중" # AI Translated msgid "Arranging " msgstr "정렬 중 " msgid "Arranging canceled." msgstr "정렬 취소됨." msgid "Arranging complete, but some items were not able to be arranged. Reduce spacing and try again." msgstr "정렬은 완료되었지만 배치가 안 된 항목이 있습니다. 간격을 줄이고 다시 시도하세요." msgid "Arranging done." msgstr "정렬 완료." msgid "Arrange failed. Found some exceptions when processing object geometries." msgstr "정렬에 실패했습니다. 객체 형상을 처리할 때 일부 예외를 발견했습니다." #, c-format, boost-format msgid "" "Arrangement ignored the following objects which can't fit into a single bed:\n" "%s" msgstr "" "정렬이 단일 플레이트에 들어갈 수 없는 다음 객체를 무시했습니다:\n" "%s" msgid "" "All the selected objects are on a locked plate.\n" "Cannot auto-orient these objects." msgstr "" "선택한 모든 물체는 잠긴 플레이트에 있습니다,\n" "이러한 객체에 대해 자동 방향 지정을 수행할 수 없습니다." msgid "" "This plate is locked.\n" "Cannot auto-orient on this plate." msgstr "" "이 플레이트는 잠겨 있습니다,\n" "이 플레이트에서 자동 방향 지정을 할 수 없습니다." msgid "Orienting..." msgstr "방향 지정 중..." msgid "Orienting" msgstr "방향 지정 중" msgid "Orienting canceled." msgstr "방향지정이 취소되었습니다." msgid "Filling" msgstr "채우기" msgid "Bed filling canceled." msgstr "베드 채우기 취소됨." msgid "Bed filling done." msgstr "베드 채우기 완료." msgid "Searching for optimal orientation" msgstr "최적의 방향 검색" msgid "Orientation search canceled." msgstr "방향 검색이 취소되었습니다." msgid "Orientation found." msgstr "방향을 찾았습니다." msgid "Logging in" msgstr "로그인 중" msgid "Login failed" msgstr "로그인 실패" msgid "Please check the printer network connection." msgstr "프린터 네트워크 연결을 확인하세요." msgid "Abnormal print file data: please slice again." msgstr "비정상적인 출력 파일 데이터: 다시 슬라이스하세요." msgid "Task canceled." msgstr "작업 취소됨." msgid "Upload task timed out. Please check the network status and try again." msgstr "업로드 작업 시간이 초과되었습니다.네트워크 상태를 확인하고 다시 시도하세요." msgid "Cloud service connection failed. Please try again." msgstr "클라우드 서비스 연결에 실패했습니다. 다시 시도하세요." msgid "Print file not found; please slice again." msgstr "출력파일을 찾을 수 없습니다. 다시 슬라이스하세요." msgid "The print file exceeds the maximum allowable size (1GB). Please simplify the model and slice again." msgstr "출력 파일이 최대 허용 크기 (1GB) 를 초과했습니다.모델을 단순화하고 다시 슬라이스하세요." msgid "Failed to send the print job. Please try again." msgstr "출력 작업을 전송하지 못했습니다. 다시 시도하세요." msgid "Failed to upload file to ftp. Please try again." msgstr "파일을 ftp에 업로드하지 못했습니다. 다시 시도해 주세요." msgid "Check the current status of the Bambu Lab server by clicking on the link above." msgstr "위의 링크를 클릭하여 뱀부랩 서버의 현재 상태를 확인하세요." msgid "The size of the print file is too large. Please adjust the file size and try again." msgstr "출력 파일의 크기가 너무 큽니다. 파일 크기를 조정한 후 다시 시도하세요." msgid "Print file not found; please slice it again and send it for printing." msgstr "출력 파일을 찾을 수 없습니다. 다시 슬라이스하여 출력전송하세요." msgid "Failed to upload print file via FTP. Please check the network status and try again." msgstr "출력 파일을 FTP에 업로드하지 못했습니다. 네트워크 상태를 확인하신 후 다시 시도해 주세요." msgid "Sending print job over LAN" msgstr "LAN을 통해 출력 작업 전송 중" msgid "Sending print job through cloud service" msgstr "클라우드 서비스를 통해 출력 작업 전송 중" msgid "Print task sending times out." msgstr "출력 작업 전송 시간이 초과되었습니다." msgid "Service Unavailable" msgstr "서비스 사용 불가" msgid "Unknown Error." msgstr "알 수 없는 오류." msgid "Sending print configuration" msgstr "출력 구성 전송 중" #, c-format, boost-format msgid "Successfully sent. Will automatically jump to the device page in %ss" msgstr "성공적으로 보냈습니다. %s에서 자동으로 장치 페이지로 이동합니다" #, c-format, boost-format msgid "Successfully sent. Will automatically jump to the next page in %ss" msgstr "성공적으로 전송되었습니다. %ss의 다음 페이지로 자동으로 이동합니다" #, c-format, boost-format msgid "Access code:%s IP address:%s" msgstr "액세스 코드:%s IP 주소:%s" msgid "A Storage needs to be inserted before printing via LAN." msgstr "LAN을 통해 인쇄하기 전에 저장 장치를 삽입해야 합니다." msgid "Sending print job over LAN, but the Storage in the printer is abnormal and print-issues may be caused by this." msgstr "LAN을 통해 인쇄 작업을 보내는 중이지만 프린터의 저장 장치에 이상이 있어 인쇄 문제가 발생할 수 있습니다." msgid "The Storage in the printer is abnormal. Please replace it with a normal Storage before sending print job to printer." msgstr "프린터의 저장 장치에 이상이 있습니다. 인쇄 작업을 보내기 전에 정상 저장 장치로 교체하세요." msgid "The Storage in the printer is read-only. Please replace it with a normal Storage before sending print job to printer." msgstr "프린터의 저장 장치가 읽기 전용입니다. 인쇄 작업을 보내기 전에 정상 저장 장치로 교체하세요." msgid "Encountered an unknown error with the Storage status. Please try again." msgstr "저장 장치 상태에서 알 수 없는 오류가 발생했습니다. 다시 시도하세요." msgid "Sending G-code file over LAN" msgstr "LAN을 통해 Gcode 파일 전송 중" msgid "Sending G-code file to SD card" msgstr "SD 카드로 Gcode 파일 전송 중" #, c-format, boost-format msgid "Successfully sent. Close current page in %s s" msgstr "성공적으로 보냈습니다. %s초 내에 현재 페이지가 닫힙니다" msgid "Storage needs to be inserted before sending to printer." msgstr "프린터에 보내기 전에 저장 장치를 삽입해야 합니다." msgid "Sending G-code file over LAN, but the Storage in the printer is abnormal and print-issues may be caused by this." msgstr "LAN을 통해 G-code 파일을 보내는 중이지만 프린터의 저장 장치에 이상이 있어 인쇄 문제가 발생할 수 있습니다." msgid "The Storage in the printer is abnormal. Please replace it with a normal Storage before sending to printer." msgstr "프린터의 저장 장치에 이상이 있습니다. 프린터에 보내기 전에 정상 저장 장치로 교체하세요." msgid "The Storage in the printer is read-only. Please replace it with a normal Storage before sending to printer." msgstr "프린터의 저장 장치가 읽기 전용입니다. 프린터에 보내기 전에 정상 저장 장치로 교체하세요." msgid "Bad input data for EmbossCreateObjectJob." msgstr "EmbossCreateObjectJob의 입력 데이터가 잘못되었습니다." msgid "Add Emboss text object" msgstr "엠보스 텍스트 객체 추가" msgid "Bad input data for EmbossUpdateJob." msgstr "EmbossUpdateJob의 입력 데이터가 잘못되었습니다." msgid "Created text volume is empty. Change text or font." msgstr "생성된 텍스트 볼륨이 비어 있습니다. 텍스트 또는 글꼴을 변경하세요." msgid "Bad input data for CreateSurfaceVolumeJob." msgstr "CreateSurfaceVolumeJob의 입력 데이터가 잘못되었습니다." msgid "Bad input data for UseSurfaceJob." msgstr "UseSurfaceJob의 입력 데이터가 잘못되었습니다." #. TRN: This is the title of the action appearing in undo/redo stack. #. It is same for Text and SVG. msgid "Emboss attribute change" msgstr "엠보스 속성 변경" msgid "Add Emboss text Volume" msgstr "엠보스 텍스트 볼륨 추가" msgid "Font doesn't have any shape for given text." msgstr "글꼴에 지정된 텍스트의 형태가 없습니다." msgid "There is no valid surface for text projection." msgstr "텍스트 프로젝션에 유효한 표면이 없습니다." # AI Translated msgid "An unexpected error occurred" msgstr "예기치 않은 오류가 발생했습니다" msgid "Thermal Preconditioning for first layer optimization" msgstr "첫 번째 레이어 최적화를 위한 열 사전 조건" msgid "Remaining time: Calculating..." msgstr "남은 시간: 계산 중..." msgid "The heated bed's thermal preconditioning helps optimize the first layer print quality. Printing will start once preconditioning is complete." msgstr "히팅 베드의 열 사전 조건은 첫 번째 레이어 인쇄 품질을 최적화합니다. 사전 조건 완료 후 인쇄가 시작됩니다." #, c-format, boost-format msgid "Remaining time: %dmin%ds" msgstr "남은 시간: %d분%d초" msgid "Importing SLA archive" msgstr "SLA 압축파일 가져오는 중" msgid "The SLA archive doesn't contain any presets. Please activate some SLA printer presets first before importing that SLA archive." msgstr "SLA 압축파일에 사전 설정이 없습니다. 해당 SLA 압축파일를 가져오기 전에 먼저 일부 SLA 프린터 사전 설정을 활성화하세요." msgid "Importing canceled." msgstr "가져오기가 취소되었습니다." msgid "Importing done." msgstr "가져오기가 완료되었습니다." msgid "The imported SLA archive did not contain any presets. The current SLA presets were used as fallback." msgstr "가져온 SLA 압축파일에 사전 설정이 없습니다. 현재 SLA 사전 설정이 예비로 사용되었습니다." msgid "You cannot load an SLA project with a multi-part object on the bed" msgstr "베드에 다중 부품 객체가 있는 SLA 프로젝트를 로드할 수 없습니다" msgid "Please check your object list before preset changing." msgstr "사전 설정을 변경하기 전에 객체 목록을 확인하세요." msgid "Attention!" msgstr "주목!" msgid "Downloading" msgstr "다운로드 중" msgid "Download failed" msgstr "다운로드 실패" msgid "Canceled" msgstr "취소됨" msgid "Installed successfully" msgstr "성공적으로 설치하였습니다." msgid "Installing" msgstr "설치 중" msgid "Install failed" msgstr "설치 실패" # AI Translated msgid "License Info" msgstr "라이선스 정보" msgid "Copyright" msgstr "저작권" msgid "License" msgstr "라이센스" msgid "Orca Slicer is licensed under " msgstr "Orca Slicer의 라이선스는 다음과 같습니다 " msgid "GNU Affero General Public License, version 3" msgstr "GNU Affero 일반 공용 라이선스, 버전 3" msgid "Orca Slicer is based on PrusaSlicer and BambuStudio" msgstr "Orca Slicer는 PrusaSlicer와 BambuStudio를 기반으로 합니다" msgid "Libraries" msgstr "라이브러리" msgid "This software uses open source components whose copyright and other proprietary rights belong to their respective owners" msgstr "이 소프트웨어는 저작권 및 기타 소유권이 해당 소유자에게 속한 오픈 소스 구성 요소를 사용합니다" #, c-format, boost-format msgid "About %s" msgstr "%s 정보" # AI Translated msgid "Open-source slicing stands on a tradition of collaboration and attribution. Slic3r, created by Alessandro Ranellucci and the RepRap community, laid the foundation. PrusaSlicer by Prusa Research built on that work, Bambu Studio forked from PrusaSlicer, and SuperSlicer extended it with community-driven enhancements. Each project carried the work of its predecessors forward, crediting those who came before." msgstr "오픈 소스 슬라이싱은 협업과 출처 표기의 전통 위에 서 있습니다. Alessandro Ranellucci와 RepRap 커뮤니티가 만든 Slic3r가 그 토대를 마련했습니다. Prusa Research의 PrusaSlicer는 그 성과를 발전시켰고, Bambu Studio는 PrusaSlicer에서 분기했으며, SuperSlicer는 커뮤니티 주도의 개선 사항으로 이를 확장했습니다. 각 프로젝트는 앞선 프로젝트의 성과를 이어받으며 선행자들의 공로를 인정해 왔습니다." # AI Translated msgid "OrcaSlicer began in that same spirit, drawing from PrusaSlicer, BambuStudio, SuperSlicer, and CuraSlicer. But it has since grown far beyond its origins — introducing advanced calibration tools, precise wall and seam control and hundreds of other features." msgstr "OrcaSlicer도 같은 정신으로 시작하여 PrusaSlicer, BambuStudio, SuperSlicer, CuraSlicer에서 많은 것을 받아들였습니다. 그러나 이후 고급 교정 도구, 정밀한 벽 및 재봉선 제어를 비롯한 수백 가지 기능을 도입하며 그 출발점을 훨씬 뛰어넘어 성장했습니다." # AI Translated msgid "Today, OrcaSlicer is the most widely used and actively developed open-source slicer in the 3D printing community. Many of its innovations have been adopted by other slicers, making it a driving force for the entire industry." msgstr "오늘날 OrcaSlicer는 3D 프린팅 커뮤니티에서 가장 널리 사용되고 가장 활발하게 개발되는 오픈 소스 슬라이서입니다. 그 혁신 가운데 다수가 다른 슬라이서에도 채택되어 업계 전체를 이끄는 원동력이 되고 있습니다." msgid "AMS Materials Setting" msgstr "AMS 재료 설정" msgid "Close" msgstr "닫기" msgid "" "Nozzle\n" "Temperature" msgstr "" "노즐\n" "온도" msgid "max" msgstr "최대" msgid "min" msgstr "최소" #, boost-format msgid "The input value should be greater than %1% and less than %2%" msgstr "입력 값은 %1%보다 크고 %2%보다 작아야 합니다" msgid "Factors of Flow Dynamics Calibration" msgstr "동적 압출량 교정 계수" msgid "Wiki Guide" msgstr "위키 가이드" msgid "PA Profile" msgstr "PA 사전설정" msgid "Factor K" msgstr "K 계수" msgid "Factor N" msgstr "N 계수" msgid "Setting AMS slot information while printing is not supported" msgstr "출력 중에는 AMS 슬롯 정보 설정이 지원되지 않습니다" msgid "Setting Virtual slot information while printing is not supported" msgstr "출력 중에는 가상 슬롯 정보 설정이 지원되지 않습니다" msgid "Are you sure you want to clear the filament information?" msgstr "정말 필라멘트 정보를 삭제하시겠습니까?" msgid "You need to select the material type and color first." msgstr "재료 유형과 색상을 먼저 선택해야 합니다." #, c-format, boost-format msgid "Please input a valid value (K in %.1f~%.1f)" msgstr "유효한 값을 입력하세요 (%.1f~%.1f 사이의 K)" #, c-format, boost-format msgid "Please input a valid value (K in %.1f~%.1f, N in %.1f~%.1f)" msgstr "유효한 값을 입력하세요 (%.1f~%.1f 사이의 K, %.1f~%.1f 사이의 N)" msgid "" "The nozzle flow is not set. Please set the nozzle flow rate before editing the filament.\n" "'Device -> Print parts'" msgstr "" "노즐 유량이 설정되지 않았습니다. 필라멘트를 편집하기 전에 노즐 유량을 설정하세요.\n" "'장치 -> 파트 출력'" msgid "AMS" msgstr "AMS" msgid "Other Color" msgstr "기타 색상" msgid "Custom Color" msgstr "사용자 정의 색상" msgid "Dynamic flow calibration" msgstr "동적 압출량 교정" msgid "The nozzle temp and max volumetric speed will affect the calibration results. Please fill in the same values as the actual printing. They can be auto-filled by selecting a filament preset." msgstr "노즐 온도와 최대 압출 속도는 교정 결과에 영향을 미칩니다. 실제 출력과 동일한 값을 입력하세요. 필라멘트 사전 설정을 선택하여 자동으로 입력할 수 있습니다." msgid "Nozzle Diameter" msgstr "노즐 직경" msgid "Plate Type" msgstr "플레이트 타입" msgid "Nozzle temperature" msgstr "노즐 온도" msgid "Bed Temperature" msgstr "베드 온도" msgid "Max volumetric speed" msgstr "최대 압출 속도" msgid "℃" msgstr "℃" msgid "Bed temperature" msgstr "베드 온도" msgid "mm³" msgstr "mm³" # AI Translated msgid "Start" msgstr "시작" msgid "Next" msgstr "다음" msgid "Calibration completed. Please find the most uniform extrusion line on your hot bed like the picture below, and fill the value on its left side into the factor K input box." msgstr "교정이 완료되었습니다. 당신의 고온 베드에서 아래 사진과 같이 가장 균일한 압출 선을 찾아 왼쪽에 있는 값을 입력 상자의 K 계수에 채워주세요." msgid "Save" msgstr "저장" msgctxt "Navigation" msgid "Back" msgstr "뒷면" msgid "Example" msgstr "예시" #, c-format, boost-format msgid "Calibrating... %d%%" msgstr "교정 중... %d%%" msgid "Calibration completed" msgstr "교정 완료" #, c-format, boost-format msgid "%s does not support %s" msgstr "%s 은(는) %s 을(를) 지원하지 않습니다" msgid "Step" msgstr "단계" msgid "Unmapped" msgstr "매핑되지 않음" msgid "" "Upper half area: Original\n" "Lower half area: The filament from original project will be used when unmapped.\n" "And you can click it to modify" msgstr "" "상반신 영역: 원본\n" "아래쪽 절반 영역: 매핑을 해제하면 원본 프로젝트의 필라멘트가 사용됩니다.\n" "그리고 클릭하여 수정할 수 있습니다" msgid "" "Upper half area: Original\n" "Lower half area: Filament in AMS\n" "And you can click it to modify" msgstr "" "상반신 영역: 원본\n" "아래쪽 절반 영역: AMS의 필라멘트\n" "클릭하여 수정할 수 있습니다" msgid "" "Upper half area: Original\n" "Lower half area: Filament in AMS\n" "And you cannot click it to modify" msgstr "" "상반신 영역: 원본\n" "아래쪽 절반 영역: AMS의 필라멘트\n" "클릭하여 수정할 수 없습니다" msgid "AMS Slots" msgstr "AMS 슬롯" msgid "Please select from the following filaments" msgstr "다음 필라멘트 중에서 선택하세요" # AI Translated #, c-format, boost-format msgid "Select filament that installed to the %s" msgstr "%s에 장착된 필라멘트를 선택하십시오" msgid "Left AMS" msgstr "왼쪽 AMS" msgid "External" msgstr "외부" msgid "Reset current filament mapping" msgstr "현재 필라멘트 매핑 재설정" msgid "Right AMS" msgstr "오른쪽 AMS" #, c-format, boost-format msgid "Printing with the current nozzle may produce an extra %0.2f g of waste." msgstr "현재 노즐로 출력하면 약 %0.2fg의 낭비물이 발생할 수 있습니다." # AI Translated #, c-format, boost-format msgid "Tips: the filament type(%s) does not match with the filament type(%s) in the slicing file. If you want to use this slot, you can install %s instead of %s and change slot information on the 'Device' page." msgstr "안내: 필라멘트 유형(%s)이 슬라이싱 파일의 필라멘트 유형(%s)과 일치하지 않습니다. 이 슬롯을 사용하려면 %s을(를) %s 대신 장착하고 '장치' 페이지에서 슬롯 정보를 변경하십시오." # AI Translated #, c-format, boost-format msgid "Cannot select: the filament type(%s) does not match with the filament type(%s) in the slicing file. If you want to use this slot, you can install %s instead of %s and change slot information on the 'Device' page." msgstr "선택할 수 없음: 필라멘트 유형(%s)이 슬라이싱 파일의 필라멘트 유형(%s)과 일치하지 않습니다. 이 슬롯을 사용하려면 %s을(를) %s 대신 장착하고 '장치' 페이지에서 슬롯 정보를 변경하십시오." # AI Translated #, c-format, boost-format msgid "Cannot select: the slot is empty or undefined. If you want to use this slot, you can install %s and change slot information on the 'Device' page." msgstr "선택할 수 없음: 슬롯이 비어 있거나 정의되지 않았습니다. 이 슬롯을 사용하려면 %s을(를) 장착하고 '장치' 페이지에서 슬롯 정보를 변경하십시오." # AI Translated msgid "Cannot select: No filament loaded in current slot." msgstr "선택할 수 없음: 현재 슬롯에 로드된 필라멘트가 없습니다." msgid "Enable AMS" msgstr "AMS 사용" msgid "Print with filament in the AMS" msgstr "AMS의 필라멘트로 출력" msgid "Disable AMS" msgstr "AMS 미사용" # AI Translated msgid "Print with filament on external spool" msgstr "외부 스풀의 필라멘트로 출력" msgid "Please change the desiccant when it is too wet. The indicator may not represent accurately in following cases: when the lid is open or the desiccant pack is changed. It takes a few hours to absorb the moisture, and low temperatures also slow down the process." msgstr "건조제가 너무 젖으면 교체하세요. 뚜껑이 열려 있거나 건조제 팩을 교체한 경우, 습기를 흡수하는 데 몇 시간이 걸리는 경우, 낮은 온도로 인해 공정이 느려지는 경우 등에는 표시기가 정확하게 표시되지 않을 수 있습니다." msgid "Configure which AMS slot should be used for a filament used in the print job." msgstr "출력 작업에 사용되는 필라멘트에 사용할 AMS 슬롯 구성" msgid "Filament used in this print job" msgstr "이 출력 작업에 사용된 필라멘트" msgid "AMS slot used for this filament" msgstr "이 필라멘트에 사용되는 AMS 슬롯" msgid "Click to select AMS slot manually" msgstr "클릭하여 AMS 슬롯을 수동으로 선택합니다" msgid "Do not Enable AMS" msgstr "AMS 비활성" # AI Translated msgid "Print using filament on external spool." msgstr "외부 스풀의 필라멘트를 사용하여 출력합니다." msgid "Print with filament in AMS" msgstr "AMS의 필라멘트로 출력" # AI Translated msgctxt "Nozzle position" msgid "Left" msgstr "왼쪽" # AI Translated msgctxt "Nozzle position" msgid "Right" msgstr "오른쪽" msgid "When the current material run out, the printer will continue to print in the following order." msgstr "현재 재료가 소진되면 프린터는 다음 순서로 계속 출력합니다." # AI Translated msgid "Identical filament: same brand, type and color." msgstr "동일한 필라멘트: 브랜드, 유형, 색상이 같습니다." msgid "Group" msgstr "그룹" msgid "When the current material runs out, the printer would use identical filament to continue printing." msgstr "현재 재료가 다 떨어지면 프린터는 동일한 필라멘트를 사용하여 출력을 계속합니다." msgid "The printer does not currently support auto refill." msgstr "프린터는 현재 자동 리필을 지원하지 않습니다." msgid "AMS filament backup is not enabled; please enable it in the AMS settings." msgstr "AMS 필라멘트 백업이 활성화되지 않았습니다. AMS 설정에서 활성화하세요." msgid "" "When the current filament runs out, the printer will use identical filament to continue printing.\n" "*Identical filament: same brand, type and color." msgstr "" "현재 필라멘트가 다 떨어지면 프린터는 동일한 필라멘트를 사용하여 출력을 계속합니다.\n" "*동일한 필라멘트: 동일한 브랜드, 유형 및 색상." msgid "DRY" msgstr "건조함" msgid "WET" msgstr "습함" msgid "AMS Settings" msgstr "AMS 설정" msgid "Insertion update" msgstr "삽입 업데이트" msgid "The AMS will automatically read the filament information when inserting a new Bambu Lab filament spool. This takes about 20 seconds." msgstr "AMS는 새 뱀부랩 필라멘트를 삽입할 때 필라멘트 정보를 자동으로 읽습니다. 이 작업은 약 20초 정도 걸립니다." msgid "Note: if a new filament is inserted during printing, the AMS will not automatically read any information until printing is completed." msgstr "참고: 출력 중에 새 필라멘트를 삽입하면 출력가 완료될 때까지 AMS가 자동으로 정보를 읽지 않습니다." msgid "When inserting a new filament, the AMS will not automatically read its information, leaving it blank for you to enter manually." msgstr "새 필라멘트를 삽입할 때 AMS는 정보를 자동으로 읽지 않고 사용자가 수동으로 입력할 수 있도록 비워 둡니다." # AI Translated msgid "Update on startup" msgstr "시작 시 업데이트" msgid "The AMS will automatically read the information of inserted filament on start-up. It will take about 1 minute. The reading process will rotate the filament spools." msgstr "AMS는 시동 시 삽입된 필라멘트의 정보를 자동으로 읽습니다. 1분 정도 걸립니다. 판독 프로세스는 필라멘트 스풀을 롤링합니다." msgid "The AMS will not automatically read information from inserted filament during startup and will continue to use the information recorded before the last shutdown." msgstr "AMS는 시동 중에 삽입된 필라멘트의 정보를 자동으로 읽지 않으며 마지막 종료 전에 기록된 정보를 계속 사용합니다." msgid "Update remaining capacity" msgstr "남은 용량 업데이트" msgid "AMS will attempt to estimate the remaining capacity of the Bambu Lab filaments." msgstr "AMS는 Bambu Lab 필라멘트의 남은 용량을 추정하려고 시도합니다." msgid "AMS filament backup" msgstr "AMS 필라멘트 백업" msgid "AMS will continue to another spool with matching filament properties automatically when current filament runs out." msgstr "AMS는 현재 필라멘트가 소진되면 동일한 필라멘트 특성을 가진 다른 스풀로 자동으로 이동합니다" msgid "Air Printing Detection" msgstr "허공 출력 감지" msgid "Detects clogging and filament grinding, halting printing immediately to conserve time and filament." msgstr "막힘 및 필라멘트 연삭을 감지하여 출력를 즉시 중단하여 시간과 필라멘트를 절약합니다." msgid "AMS Type" msgstr "AMS 유형" msgid "Switching" msgstr "전환 중" msgid "The printer is busy and cannot switch AMS type." msgstr "프린터가 사용 중이어서 AMS 유형을 전환할 수 없습니다." msgid "Please unload all filament before switching." msgstr "교체하기 전에 모든 필라멘트를 언로드하십시오." # AI Translated msgid "AMS type switching needs firmware update, taking about 30s. Switch now?" msgstr "AMS 유형 전환에는 펌웨어 업데이트가 필요하며 약 30초가 걸립니다. 지금 전환하시겠습니까?" msgid "Arrange AMS Order" msgstr "AMS 순서 정렬" msgid "AMS ID will be reset. If you want a specific ID sequence, disconnect all AMS before resetting and connect them in the desired order after resetting." msgstr "AMS ID가 재설정됩니다. 특정 ID 순서를 원하시면 재설정 전에 모든 AMS 연결을 해제하고, 재설정 후 원하는 순서대로 다시 연결하세요." msgid "File" msgstr "파일" msgid "Calibration" msgstr "교정" msgid "Failed to download the plug-in. Please check your firewall settings and VPN software and retry." msgstr "플러그인을 다운로드하지 못했습니다. 방화벽 설정 및 VPN 소프트웨어를 확인하고 확인한 후 다시 시도하세요." # AI Translated msgid "Failed to install the plug-in. The plug-in file may be in use. Please restart OrcaSlicer and try again. Also check whether it is blocked or has been deleted by anti-virus software." msgstr "플러그인을 설치하지 못했습니다. 플러그인 파일이 사용 중일 수 있습니다. OrcaSlicer를 다시 시작한 후 다시 시도하십시오. 백신 소프트웨어가 파일을 차단했거나 삭제했는지도 확인하십시오." msgid "Click here to see more info" msgstr "자세한 내용을 보려면 여기를 클릭하세요" # AI Translated msgid "The network plug-in was installed but could not be loaded. Please restart the application." msgstr "네트워크 플러그인이 설치되었지만 로드할 수 없습니다. 애플리케이션을 다시 시작하십시오." # AI Translated msgid "Restart Required" msgstr "다시 시작 필요" msgid "Please home all axes (click " msgstr "모든 축을 홈으로 이동하세요(클릭 " msgid ") to locate the toolhead's position. This prevents device moving beyond the printable boundary and causing equipment wear." msgstr ")을 클릭하여 툴헤드의 위치를 찾습니다. 이렇게 하면 장치가 출력 가능한 경계를 벗어나 장치가 마모되는 것을 방지할 수 있습니다." msgid "Go Home" msgstr "홈으로" msgid "An error occurred. The system may have run out of memory, or a bug may have occurred." msgstr "오류가 발생했습니다. 시스템 메모리가 부족하거나 프로그램의 버그일 수 있습니다" #, boost-format msgid "A fatal error occurred: \"%1%\"" msgstr "치명적인 오류가 발생했습니다: “%1%”" msgid "Please save your project and restart the application." msgstr "프로젝트를 저장하고 프로그램을 다시 시작하세요." msgid "Processing G-Code from previous file…" msgstr "이전 파일의 Gcode를 처리하는 중..." msgid "Slicing complete" msgstr "슬라이싱 완료" msgid "Access violation" msgstr "액세스 위반" msgid "Illegal instruction" msgstr "잘못된 명령" msgid "Divide by zero" msgstr "0으로 나누기" msgid "Overflow" msgstr "압출과다" msgid "Underflow" msgstr "압출부족" msgid "Floating reserved operand" msgstr "떠있는 예약 피연산자" msgid "Stack overflow" msgstr "스택 오버플로" msgid "Running post-processing scripts" msgstr "후처리 스크립트 실행중" msgid "Successfully executed post-processing script" msgstr "성공적으로 실행된 후처리 스크립트" msgid "Unknown error occurred during exporting G-code." msgstr "Gcode를 내보내는 동안 알 수 없는 오류가 발생했습니다." #, boost-format msgid "" "Copying of the temporary G-code to the output G-code failed. Maybe the SD card is write locked?\n" "Error message: %1%" msgstr "" "임시 Gcode를 출력 Gcode로 복사하지 못했습니다. SD 카드가 쓰기 잠겨 있나요?\n" "오류 메시지입니다: %1%" #, boost-format msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp." msgstr "임시 Gcode를 출력 Gcode로 복사하지 못했습니다. 대상 장치에 문제가 있을 수 있으니 다시 내보내거나 다른 장치를 사용해 보세요. 손상된 출력 Gcode는 %1%.tmp에 있습니다." #, boost-format msgid "Renaming of the G-code after copying to the selected destination folder has failed. Current path is %1%.tmp. Please try exporting again." msgstr "선택한 대상 폴더로 복사한 후 Gcode의 이름을 바꾸지 못했습니다. 현재 경로는 %1%.tmp입니다. 내보내기를 다시 시도하세요." #, boost-format msgid "Copying of the temporary G-code has finished but the original code at %1% couldn't be opened during copy check. The output G-code is at %2%.tmp." msgstr "임시 Gcode의 복사가 완료되었지만 복사 확인 중에 %1%의 원본 코드를 열 수 없습니다. 출력 G-코드는 %2%.tmp에 있습니다." #, boost-format msgid "Copying of the temporary G-code has finished but the exported code couldn't be opened during copy check. The output G-code is at %1%.tmp." msgstr "임시 Gcode 복사가 완료되었지만 복사 확인 중에 내보낸 코드를 열 수 없습니다. 출력 G-코드는 %1%.tmp에 있습니다." #, boost-format msgid "G-code file exported to %1%" msgstr "%1%로 내보낸 Gcode 파일" msgid "Unknown error with G-code export" msgstr "Gcode를 내보낼 때 알 수 없는 오류가 발생했습니다." #, boost-format msgid "" "Failed to save G-code file.\n" "Error message: %1%.\n" "Source file %2%." msgstr "" "Gcode 파일을 저장하지 못했습니다.\n" "오류 메시지: %1%.\n" "원본 파일 %2%." msgid "Copying of the temporary G-code to the output G-code failed." msgstr "출력 Gcode에 임시 Gcode를 복사하지 못했습니다" #, boost-format msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue" msgstr "%1%로 업로드 예약 중. 윈도우 -> 호스트 업로드 출력 대기열 참조" msgid "Origin" msgstr "원점" msgid "Size in X and Y of the rectangular plate." msgstr "직사각형 플레이트의 X 및 Y 크기." msgid "Distance of the 0,0 G-code coordinate from the front left corner of the rectangle." msgstr "직사각형의 전면 왼쪽 모서리에서 Gcode 좌표 0,0 까지의 거리입니다." msgid "Diameter of the print bed. It is assumed that origin (0,0) is located in the center." msgstr "출력 베드의 직경입니다. 원점(0,0)이 중심에 있다고 가정합니다." msgid "Rectangular" msgstr "직사각형" msgid "Circular" msgstr "원형" msgid "Load shape from STL..." msgstr "STL에서 모양 불러오기..." msgid "Settings" msgstr "설정" msgid "Remove" msgstr "제거" msgid "Not found:" msgstr "찾을 수 없음:" msgid "Model" msgstr "모델" msgid "Choose an STL file to import bed shape from:" msgstr "베드 모양을 불러올 STL 파일 선택:" msgid "Invalid file format." msgstr "잘못된 파일 형식입니다." msgid "Error: invalid model" msgstr "오류! 잘못된 모델입니다" msgid "The selected file contains no geometry." msgstr "선택한 파일에 형상이 없습니다." msgid "The selected file contains several disjointed areas. This is not supported." msgstr "선택한 파일에 여러 개의 분리된 영역이 있습니다. 지원되지 않습니다." msgid "Choose a file to import bed texture from (PNG/SVG):" msgstr "베드 텍스처를 가져올 파일을 선택하세요 (PNG/SVG):" msgid "Choose an STL file to import bed model from:" msgstr "베드 모델을 가져올 STL 파일 선택:" msgid "Bed Shape" msgstr "베드 모양" #, c-format, boost-format msgid "A minimum temperature above %d℃ is recommended for %s.\n" msgstr "%d℃ 이상의 최소 온도가 %s에 권장됩니다.\n" #, c-format, boost-format msgid "A maximum temperature below %d℃ is recommended for %s.\n" msgstr "%d℃ 이하의 최대 온도가 %s에 권장됩니다.\n" msgid "The recommended minimum temperature cannot be higher than the recommended maximum temperature.\n" msgstr "권장 최저 온도는 권장 최고 온도보다 높을 수 없습니다.\n" msgid "Please check.\n" msgstr "확인해 보세요.\n" msgid "" "The nozzle may become clogged when the temperature is out of the recommended range.\n" "Please make sure whether to use this temperature to print.\n" "\n" msgstr "" "온도가 권장 범위를 벗어나면 노즐이 막힐 수 있습니다.\n" "출력 시 어떤 온도를 사용할지 확인하세요.\n" "\n" #, c-format, boost-format msgid "The recommended nozzle temperature for this filament type is [%d, %d] degrees Celsius." msgstr "이 필라멘트 유형의 권장 노즐 온도는 [%d, %d]°C입니다" # AI Translated msgid "Adaptive Pressure Advance model validation failed:\n" msgstr "적응형 PA 모델 검증에 실패했습니다:\n" msgid "" "Too small max volumetric speed.\n" "Value was reset to 0.5" msgstr "" "최대 압출 속도가 너무 작습니다.\n" "0.5로 재설정" #, c-format, boost-format msgid "Current chamber temperature is higher than the material's safe temperature; this may result in material softening and nozzle clogs. The maximum safe temperature for the material is %d" msgstr "현재 챔버 온도가 재료의 안전 온도보다 높으므로 재료가 부드러워지고 막힐 수 있습니다. 재료의 최대 안전 온도는 %d입니다" # AI Translated #, c-format, boost-format msgid "The minimal chamber temperature (%d℃) is higher than the target chamber temperature (%d℃). The minimal value is the threshold at which printing starts while the chamber keeps heating toward the target, so it should not exceed it. It will be clamped to the target." msgstr "최소 챔버 온도(%d℃)가 목표 챔버 온도(%d℃)보다 높습니다. 최소값은 챔버가 목표 온도까지 계속 가열되는 동안 출력을 시작하는 기준값이므로 목표값을 초과해서는 안 됩니다. 이 값은 목표값으로 제한됩니다." msgid "" "Layer height too small\n" "It has been reset to 0.2" msgstr "" "레이어 높이가 너무 작습니다.\n" "0.2로 재설정" msgid "" "Ironing spacing too small\n" "It has been reset to 0.1" msgstr "" "다림질 간격이 너무 작습니다.\n" "0.1로 재설정" msgid "" "Zero initial layer height is invalid.\n" "\n" "The first layer height will be reset to 0.2." msgstr "" "초기 레이어 높이가 0은 유효하지 않습니다.\n" "\n" "첫 번째 레이어 높이가 0.2로 재설정됩니다." # AI Translated msgid "" "This setting is only used for tuning model size by small amounts.\n" "For example, when the model size has small errors or when tolerances are incorrect. For large adjustments, please use the model scale function.\n" "\n" "The value will be reset to 0." msgstr "" "이 설정은 모델 크기를 소량으로 미세 조정할 때만 사용됩니다.\n" "예를 들어 모델 크기에 작은 오차가 있거나 공차가 맞지 않는 경우입니다. 크게 조정하려면 모델 배율 기능을 사용하세요.\n" "\n" "값이 0으로 재설정됩니다." # AI Translated msgid "" "The elephant foot compensation value is too large.\n" "If there are significant elephant foot issues, please check other settings.\n" "The bed temperature may be too high, for example.\n" "\n" "The value will be reset to 0." msgstr "" "코끼리 발 보정 값이 너무 큽니다.\n" "코끼리 발 문제가 심각한 경우 다른 설정을 확인하세요.\n" "예를 들어 베드 온도가 너무 높을 수 있습니다.\n" "\n" "값이 0으로 재설정됩니다." msgid "Alternate extra wall does't work well when ensure vertical shell thickness is set to All." msgstr "세로 쉘 두께가 모두로 설정된 경우 대체 여분의 벽이 제대로 작동하지 않습니다." msgid "" "Change these settings automatically?\n" "Yes - Change ensure vertical shell thickness to Moderate and enable alternate extra wall\n" "No - Don't use alternate extra wall" msgstr "" "이 설정을 자동으로 변경하시겠습니까?\n" "예 - 수직 셸 두께 보장을 보통으로 변경하고 대체 추가 벽을 활성화합니다\n" "아니요 - 대체 여분의 벽을 사용하지 않습니다" msgid "" "Prime tower does not work when Adaptive Layer Height or Independent Support Layer Height is on.\n" "Which do you want to keep?\n" "YES - Keep Prime Tower\n" "NO - Keep Adaptive Layer Height and Independent Support Layer Height" msgstr "" "적응형 레이어 높이 또는 독립적 서포트 레이어 높이가 켜져 있으면 프라임 타워가 작동하지 않습니다.\n" "어떤 것을 유지하시겠습니까?\n" "예 - 프라임 타워 유지\n" "아니요 - 적응형 레이어 높이 및 독립적 서포트 레이어 높이 유지" msgid "" "Prime tower does not work when Adaptive Layer Height is on.\n" "Which do you want to keep?\n" "YES - Keep Prime Tower\n" "NO - Keep Adaptive Layer Height" msgstr "" "적응형 레이어 높이가 켜져 있으면 프라임 타워가 작동하지 않습니다.\n" "어떤 것을 유지하시겠습니까?\n" "예 - 프라임 타워 유지\n" "아니요 - 적응형 레이어 높이 유지" msgid "" "Prime tower does not work when Independent Support Layer Height is on.\n" "Which do you want to keep?\n" "YES - Keep Prime Tower\n" "NO - Keep Independent Support Layer Height" msgstr "" "독립적 서포트 레이어 높이가 켜져 있으면 프라임 타워가 작동하지 않습니다.\n" "어떤 것을 유지하시겠습니까?\n" "예 - 프라임 타워 유지\n" "아니요 - 독립적 서포트 레이어 높이 유지" msgid "" "seam_slope_start_height need to be smaller than layer_height.\n" "Reset to 0." msgstr "" "심_경사_시작_높이는 레이어_높이보다 작아야 합니다.\n" "0으로 재설정합니다." #, no-c-format, no-boost-format msgid "" "Lock depth should smaller than skin depth.\n" "Reset to 50% of skin depth." msgstr "" "잠금 깊이는 스킨 깊이보다 작아야 합니다.\n" "스킨 깊이의 50%로 재설정됩니다." msgid "Both [Extrusion] and [Combined] modes of Fuzzy Skin require the Arachne Wall Generator to be enabled." msgstr "퍼지 스킨의 [압출] 및 [결합] 모드에는 아라크네 벽 생성기가 활성화되어야 합니다." msgid "" "Change these settings automatically?\n" "Yes - Enable Arachne Wall Generator\n" "No - Disable Arachne Wall Generator and set [Displacement] mode of the Fuzzy Skin" msgstr "" "이 설정을 자동으로 변경하시겠습니까?\n" "예 - 아라크네 벽 생성기 활성화\n" "아니오 - 아라크네 벽 생성기 비활성화 및 퍼지 스킨 [변위] 모드 설정" msgid "Spiral mode only works when wall loops is 1, support is disabled, clumping detection by probing is disabled, top shell layers is 0, sparse infill density is 0 and timelapse type is traditional." msgstr "나선형 모드는 벽 루프가 1이고, 서포트가 비활성화되고, 프로빙에 의한 클럼핑 감지가 비활성화되고, 상단 셸 레이어가 0이고, 희소 인필 밀도가 0이고 타임랩스 유형이 전통적인 경우에만 작동합니다." msgid " But machines with I3 structure will not generate timelapse videos." msgstr " 그러나 I3 구조의 장치는 타임랩스 비디오를 생성하지 않습니다." msgid "" "Change these settings automatically?\n" "Yes - Change these settings and enable spiral/vase mode automatically\n" "No - Cancel enabling spiral mode" msgstr "" "이 설정을 자동으로 변경하시겠습니까?\n" "예 - 이 설정을 변경하고 나선 모드를 자동으로 활성화합니다\n" "아니오 - 이번에는 나선 모드 사용을 포기합니다" msgid "Printing" msgstr "출력 중" msgid "Auto bed leveling" msgstr "자동 베드 레벨링" msgid "Heatbed preheating" msgstr "베드 예열" msgid "Vibration compensation" msgstr "진동 보정" msgid "Changing filament" msgstr "필라멘트 변경 중" msgid "M400 pause" msgstr "M400 일시 정지" msgid "Paused (filament ran out)" msgstr "일시 중지 (필라멘트 소진)" msgid "Heating nozzle" msgstr "노즐 가열 중" msgid "Calibrating dynamic flow" msgstr "다이나믹 플로우 보정 중" msgid "Scanning bed surface" msgstr "베드 표면 스캔 중" msgid "Inspecting first layer" msgstr "첫 번째 레이어 검사 중" msgid "Identifying build plate type" msgstr "빌드 플레이트 유형 식별 중" msgid "Calibrating Micro Lidar" msgstr "마이크로 라이다 보정 중" msgid "Homing toolhead" msgstr "툴헤드 홈으로 이동 중" msgid "Cleaning nozzle tip" msgstr "노즐 팁 청소 중" msgid "Checking extruder temperature" msgstr "압출기 온도 확인 중" msgid "Paused by the user" msgstr "사용자에 의해 일시 중지" msgid "Pause (front cover fall off)" msgstr "일시 중지 (전면 커버 탈락)" msgid "Calibrating the micro lidar" msgstr "마이크로 라이다 교정" msgid "Calibrating flow ratio" msgstr "플로우 비율 보정 중" msgid "Pause (nozzle temperature malfunction)" msgstr "일시 중지 (노즐 온도 이상)" msgid "Pause (heatbed temperature malfunction)" msgstr "일시 중지 (히팅베드 온도 이상)" msgid "Filament unloading" msgstr "필라멘트 빼는 중" msgid "Pause (step loss)" msgstr "일시 중지 (스텝 손실)" msgid "Filament loading" msgstr "필라멘트 넣는 중" msgid "Motor noise cancellation" msgstr "모터 소음 제거" msgid "Pause (AMS offline)" msgstr "일시 중지 (AMS 오프라인)" msgid "Pause (low speed of the heatbreak fan)" msgstr "일시 중지 (히트브레이크 팬 저속)" msgid "Pause (chamber temperature control problem)" msgstr "일시 중지 (챔버 온도 제어 문제)" msgid "Cooling chamber" msgstr "챔버 냉각" msgid "Pause (G-code inserted by user)" msgstr "일시 중지 (사용자가 삽입한 G-code)" msgid "Motor noise showoff" msgstr "모터 소음 표시" msgid "Pause (nozzle clumping)" msgstr "일시 중지 (노즐 클럼핑)" msgid "Pause (cutter error)" msgstr "일시 중지 (커터 오류)" msgid "Pause (first layer error)" msgstr "일시 중지 (첫 번째 레이어 오류)" msgid "Pause (nozzle clog)" msgstr "일시 중지 (노즐 막힘)" msgid "Measuring motion precision" msgstr "모션 정밀도 측정 중" msgid "Enhancing motion precision" msgstr "모션 정밀도 향상 중" msgid "Measure motion accuracy" msgstr "모션 정확도 측정" msgid "Nozzle offset calibration" msgstr "노즐 오프셋 보정" msgid "High temperature auto bed leveling" msgstr "고온 자동 베드 레벨링" msgid "Auto Check: Quick Release Lever" msgstr "자동 확인: 퀵 릴리스 레버" msgid "Auto Check: Door and Upper Cover" msgstr "자동 확인: 도어 및 상단 커버" msgid "Laser Calibration" msgstr "레이저 보정" msgid "Auto Check: Platform" msgstr "자동 확인: 플랫폼" msgid "Confirming BirdsEye Camera location" msgstr "BirdsEye 카메라 위치 확인 중" msgid "Calibrating BirdsEye Camera" msgstr "BirdsEye 카메라 보정 중" msgid "Auto bed leveling -phase 1" msgstr "자동 베드 레벨링 - 단계 1" msgid "Auto bed leveling -phase 2" msgstr "자동 베드 레벨링 - 단계 2" msgid "Heating chamber" msgstr "챔버 가열 중" msgid "Cooling heatbed" msgstr "히팅베드 냉각 중" msgid "Printing calibration lines" msgstr "보정 라인 인쇄 중" msgid "Auto Check: Material" msgstr "자동 확인: 재료" msgid "Live View Camera Calibration" msgstr "라이브 뷰 카메라 보정" msgid "Waiting for heatbed to reach target temperature" msgstr "히팅베드가 목표 온도에 도달할 때까지 대기 중" msgid "Auto Check: Material Position" msgstr "자동 확인: 재료 위치" msgid "Cutting Module Offset Calibration" msgstr "커팅 모듈 오프셋 보정" msgid "Measuring Surface" msgstr "표면 측정 중" msgid "Calibrating the detection position of nozzle clumping" msgstr "노즐 클럼핑 감지 위치 보정 중" msgid "Update successful." msgstr "업데이트에 성공했습니다." msgid "Downloading failed." msgstr "다운로드 실패." msgid "Verification failed." msgstr "확인에 실패했습니다." msgid "Update failed." msgstr "업데이트에 실패했습니다." msgid "Timelapse is not supported on this printer." msgstr "이 프린터에서는 타임랩스가 지원되지 않습니다." msgid "Timelapse is not supported while the storage does not exist." msgstr "저장 장치가 없으면 타임랩스가 지원되지 않습니다." msgid "Timelapse is not supported while the storage is unavailable." msgstr "저장 장치를 사용할 수 없으면 타임랩스가 지원되지 않습니다." msgid "Timelapse is not supported while the storage is readonly." msgstr "저장 장치가 읽기 전용이면 타임랩스가 지원되지 않습니다." msgid "To ensure your safety, certain processing tasks (such as laser) can only be resumed on printer." msgstr "안전을 위해 레이저와 같은 특정 처리 작업은 프린터에서만 재개할 수 있습니다." #, c-format, boost-format msgid "The chamber temperature is too high, which may cause the filament to soften. Please wait until the chamber temperature drops below %d℃. You may open the front door or enable fans to cool down." msgstr "챔버 온도가 너무 높아 필라멘트가 연화될 수 있습니다. 챔버 온도가 %d℃ 이하로 떨어질 때까지 기다리세요. 전면 도어를 열거나 팬을 활성화하여 냉각할 수 있습니다." #, c-format, boost-format msgid "AMS temperature is too high, which may cause the filament to soften. Please wait until the AMS temperature drops below %d℃." msgstr "AMS 온도가 너무 높아 필라멘트가 연화될 수 있습니다. AMS 온도가 %d℃ 이하로 떨어질 때까지 기다리세요." msgid "The current chamber temperature or the target chamber temperature exceeds 45℃. In order to avoid extruder clogging, low temperature filament(PLA/PETG/TPU) is not allowed to be loaded." msgstr "현재 챔버 온도 또는 목표 챔버 온도가 45℃를 초과합니다. 익스트루더 막힘을 방지하기 위해 저온 필라멘트(PLA/PETG/TPU) 로딩이 허용되지 않습니다." msgid "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder. In order to avoid extruder clogging, it is not allowed to set the chamber temperature." msgstr "저온 필라멘트(PLA/PETG/TPU)가 익스트루더에 로드되어 있습니다. 익스트루더 막힘을 방지하기 위해 챔버 온도 설정이 허용되지 않습니다." msgid "When you set the chamber temperature below 40℃, the chamber temperature control will not be activated, and the target chamber temperature will automatically be set to 0℃." msgstr "챔버 온도를 40℃ 이하로 설정하면 챔버 온도 제어가 활성화되지 않습니다. 그리고 목표 챔버 온도는 자동으로 0℃ 로 설정됩니다." msgid "Failed to start print job" msgstr "출력 작업을 시작하지 못했습니다" msgid "This calibration does not support the currently selected nozzle diameter" msgstr "이 교정은 현재 선택된 노즐 직경을 지원하지 않습니다" msgid "Current flowrate cali param is invalid" msgstr "현재 압출량 교정 매개변수가 잘못되었습니다" msgid "Selected diameter and machine diameter do not match" msgstr "선택한 직경과 장치의 직경이 일치하지 않습니다" msgid "Failed to generate cali G-code" msgstr "교정 Gcode를 생성하지 못했습니다" msgid "Calibration error" msgstr "교정 오류" # AI Translated msgid "Network unavailable" msgstr "네트워크를 사용할 수 없음" msgid "Resume Printing" msgstr "출력 재개" msgid "Resume (defects acceptable)" msgstr "재개 (결함 허용)" msgid "Resume (problem solved)" msgstr "재개 (문제 해결됨)" msgid "Stop Printing" msgstr "출력 중지" msgid "Check Assistant" msgstr "어시스턴트 확인" msgid "Filament Extruded, Continue" msgstr "필라멘트 압출, 계속" msgid "Not Extruded Yet, Retry" msgstr "아직 압출되지 않았습니다. 다시 시도하세요" msgid "Finished, Continue" msgstr "완료, 계속" msgid "Filament Loaded, Resume" msgstr "필라멘트 로드됨, 재개" msgid "View Liveview" msgstr "실시간 보기" msgid "No Reminder Next Time" msgstr "다음에 알림 없음" # AI Translated msgid "Recheck" msgstr "다시 확인" msgid "Ignore. Don't Remind Next Time" msgstr "무시. 다음에 알림 없음" msgid "Ignore this and Resume" msgstr "무시하고 재개" msgid "Problem Solved and Resume" msgstr "문제 해결됨, 재개" msgid "Got it, Turn off the Fire Alarm." msgstr "확인, 화재 경보를 끕니다." msgid "Retry (problem solved)" msgstr "재시도 (문제 해결됨)" msgid "Stop Drying" msgstr "건조 중지" msgid "Proceed" msgstr "진행" # AI Translated msgid "Abort" msgstr "중단" # AI Translated msgid "Disable Purification for This Print" msgstr "이번 출력에서 공기 정화 비활성화" # AI Translated msgid "Don't Remind Me" msgstr "다시 알리지 않기" msgid "Retry" msgstr "재시도" msgid "Resume" msgstr "계속" msgid "Unknown error." msgstr "알 수 없는 오류." # AI Translated msgid "Loading ..." msgstr "로드 중 ..." msgid "default" msgstr "기본값" #, boost-format msgid "Edit Custom G-code (%1%)" msgstr "사용자 지정 Gcode 편집 (%1%)" msgid "Built-in placeholders (Double click item to add to G-code)" msgstr "기본 제공 플레이스홀더 (항목을 두 번 클릭하여 Gcode에 추가)" msgid "Search G-code placeholders" msgstr "Gcode 자리 표시자 검색" msgid "Add selected placeholder to G-code" msgstr "선택한 플레이스홀더를 Gcode에 추가" msgid "Select placeholder" msgstr "자리 표시자 선택" msgid "[Global] Slicing State" msgstr "[글로벌] 슬라이싱 상태" msgid "Read Only" msgstr "읽기 전용" msgid "Read Write" msgstr "읽기 쓰기" msgid "Slicing State" msgstr "슬라이싱 상태" msgid "Print Statistics" msgstr "통계 출력" msgid "Objects Info" msgstr "객체 정보" msgid "Dimensions" msgstr "치수" msgid "Temperatures" msgstr "온도" msgid "Timestamps" msgstr "타임스탬프" #, boost-format msgid "Specific for %1%" msgstr "%1%에 해당함" msgid "Presets" msgstr "사전 설정" msgid "Print settings" msgstr "프린터 설정" msgid "Filament settings" msgstr "필라멘트 설정" msgid "SLA Materials settings" msgstr "SLA 자료 설정" msgid "Printer settings" msgstr "프린터 설정" msgid "parameter name" msgstr "매개변수 이름" msgid "layers" msgstr "레이어" msgid "Range" msgstr "범위" msgid "Empty string" msgstr "빈 문자열" msgid "Value is out of range." msgstr "값이 범위를 벗어났습니다." #, c-format, boost-format msgid "%s can’t be a percentage" msgstr "%s 는 백분율일 수 없습니다" #, c-format, boost-format msgid "Value %s is out of range, continue?" msgstr "%s 값이 범위를 벗어났습니다. 계속하시겠습니까?" msgid "Parameter validation" msgstr "매개변수 유효성 검사" #, c-format, boost-format msgid "Value %s is out of range. The valid range is from %d to %d." msgstr "값 %s이 범위를 벗어났습니다. 유효한 범위는 %d에서 %d까지입니다." #, c-format, boost-format msgid "" "Is it %s%% or %s %s?\n" "YES for %s%%, \n" "NO for %s %s." msgstr "" "%s%% 또는 %s %s입니까?\n" "%s%%에 대해 예,\n" "%s %s에 대해 아니요." #, boost-format msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\"" msgstr "잘못된 입력 형식. 다음과 같은 벡터 형식의 치수를 입력하십시오: \"%1%\"" msgid "Input value is out of range" msgstr "입력된 값이 범위를 벗어납니다" msgid "Some extension in the input is invalid" msgstr "입력의 일부 확장자가 유효하지 않습니다" msgid "This parameter expects a valid template." msgstr "이 매개변수에는 유효한 템플릿이 필요합니다." msgid "Invalid pattern. Use N, N#K, or a comma-separated list with optional #K per entry. Examples: 5, 5#2, 1,7,9, 5,9#2,18." msgstr "잘못된 패턴입니다. N, N#K 또는 항목당 선택적 #K가 있는 쉼표로 구분된 목록을 사용하세요. 예: 5, 5#2, 1,7,9, 5,9#2,18." #, boost-format msgid "Invalid format. Expected vector format: \"%1%\"" msgstr "잘못된 형식입니다. 필요한 벡터 형식: \"%1%\"" # AI Translated msgid "N/A" msgstr "해당 없음" # AI Translated msgid "System agents" msgstr "시스템 에이전트" # AI Translated msgid "No plugin selected" msgstr "선택된 플러그인 없음" # AI Translated msgid "Add plugin" msgstr "플러그인 추가" # AI Translated msgid "Select plugin" msgstr "플러그인 선택" # AI Translated msgid "Remove plugin" msgstr "플러그인 제거" # AI Translated msgid "Configure" msgstr "구성" # AI Translated #, c-format, boost-format msgid "Configure (%d)" msgstr "구성 (%d)" msgid "Pick" msgstr "선택" msgid "Summary" msgstr "요약" msgid "Layer Height" msgstr "레이어 높이" msgid "Line Width" msgstr "선 너비" msgid "Actual Speed" msgstr "실제 속도" msgid "Acceleration" msgstr "가속도" msgid "Jerk" msgstr "Jerk" msgid "Fan Speed" msgstr "팬 속도" msgid "Flow" msgstr "압출량" msgid "Actual Flow" msgstr "실제 흐름" msgid "Tool" msgstr "툴" msgid "Layer Time" msgstr "레이어 시간" msgid "Layer Time (log)" msgstr "레이어 시간 (log)" msgid "Pressure Advance" msgstr "압력 어드밴스" msgid "Noop" msgstr "작업 없음" msgid "Retract" msgstr "후퇴" msgid "Unretract" msgstr "후퇴 취소" msgid "Seam" msgstr "재봉선" msgid "Tool Change" msgstr "툴체인지" msgid "Color Change" msgstr "색상 변경" msgid "Pause Print" msgstr "인쇄 일시 중지" msgid "Travel" msgstr "이동" msgid "Wipe" msgstr "노즐 청소" msgid "Extrude" msgstr "압출" msgid "Inner wall" msgstr "내벽" msgid "Outer wall" msgstr "외벽" msgid "Overhang wall" msgstr "오버행 벽" msgid "Sparse infill" msgstr "드문 채우기" msgid "Internal solid infill" msgstr "꽉찬 내부 채우기" msgid "Top surface" msgstr "상단 표면" msgid "Bridge" msgstr "브릿지" msgid "Gap infill" msgstr "간격 채우기" msgid "Skirt" msgstr "스커트" msgid "Support interface" msgstr "서포트 접점" msgid "Prime tower" msgstr "프라임 타워" msgid "Bottom surface" msgstr "하단 표면" msgid "Internal bridge" msgstr "내부 브릿지" msgid "Support transition" msgstr "서포트 전환" msgid "Mixed" msgstr "혼합" msgid "Height: " msgstr "높이: " msgid "Width: " msgstr "너비: " msgid "Flow: " msgstr "압출량: " msgid "Fan: " msgstr "팬: " msgid "Temperature: " msgstr "온도: " msgid "Layer Time: " msgstr "레이어 시간: " msgid "Tool: " msgstr "도구: " msgid "Color: " msgstr "색상: " # AI Translated msgid "Acceleration: " msgstr "가속도: " msgid "Jerk: " msgstr "Jerk: " msgid "PA: " msgstr "PA: " msgid "mm/s" msgstr "mm/s" msgid "mm/s²" msgstr "mm/s²" msgid "mm³/s" msgstr "mm³/s" msgid "Flow rate" msgstr "압출량" msgid "Fan speed" msgstr "팬 속도" msgid "Time" msgstr "시간" msgid "Speed: " msgstr "속도: " msgid "Actual speed profile" msgstr "실제 속도 프로파일" msgid "Statistics of All Plates" msgstr "모든 플레이트 통계" msgid "Display" msgstr "표시" msgid "Flushed" msgstr "버리기" msgid "Tower" msgstr "타워" msgid "Total" msgstr "합계" msgid "Total estimation" msgstr "추정치 합계" msgid "Total time" msgstr "시간 합계" msgid "Total cost" msgstr "총 비용" msgid "Automatically re-slice according to the optimal filament grouping, and the grouping results will be displayed after slicing." msgstr "최적의 필라멘트 그룹핑에 따라 자동으로 재슬라이싱하며, 슬라이싱 후 그룹핑 결과가 표시됩니다." msgid "Filament Grouping" msgstr "필라멘트 그룹핑" msgid "Why this grouping" msgstr "이 그룹핑의 이유" msgid "Please place filaments on the printer based on grouping result." msgstr "그룹핑 결과에 따라 프린터에 필라멘트를 배치하세요." msgid "Tips:" msgstr "팁:" msgid "Current grouping of slice result is not optimal." msgstr "현재 슬라이스 결과의 그룹핑이 최적이 아닙니다." #, boost-format msgid "Increase %1%g filament and %2% changes compared to optimal grouping." msgstr "최적 그룹핑 대비 %1%g 필라멘트와 %2%회 변경이 증가합니다." #, boost-format msgid "Increase %1%g filament and save %2% changes compared to optimal grouping." msgstr "최적 그룹핑 대비 %1%g 필라멘트가 증가하고 %2%회 변경이 절감됩니다." #, boost-format msgid "Save %1%g filament and increase %2% changes compared to optimal grouping." msgstr "최적 그룹핑 대비 %1%g 필라멘트가 절감되고 %2%회 변경이 증가합니다." #, boost-format msgid "Save %1%g filament and %2% changes compared to a printer with one nozzle." msgstr "단일 노즐 프린터 대비 %1%g 필라멘트와 %2%회 변경이 절감됩니다." #, boost-format msgid "Save %1%g filament and increase %2% changes compared to a printer with one nozzle." msgstr "단일 노즐 프린터 대비 %1%g 필라멘트가 절감되고 %2%회 변경이 증가합니다." #, boost-format msgid "Increase %1%g filament and save %2% changes compared to a printer with one nozzle." msgstr "단일 노즐 프린터 대비 %1%g 필라멘트가 증가하고 %2%회 변경이 절감됩니다." msgid "Set to Optimal" msgstr "최적으로 설정" msgid "Regroup filament" msgstr "필라멘트 재그룹핑" msgid "up to" msgstr "까지" msgid "above" msgstr "위에" msgid "from" msgstr "부터" msgid "Usage" msgstr "사용량" msgid "Layer height (mm)" msgstr "레이어 높이(mm)" msgid "Line width (mm)" msgstr "선 너비(mm)" msgid "Speed (mm/s)" msgstr "속도 (mm/s)" msgid "Actual Speed (mm/s)" msgstr "실제 속도 (mm/s)" # AI Translated msgid "Acceleration (mm/s²)" msgstr "가속도 (mm/s²)" msgid "Jerk (mm/s)" msgstr "Jerk (mm/s)" msgid "Fan speed (%)" msgstr "팬 속도 (%)" msgid "Temperature (℃)" msgstr "온도 (℃)" msgid "Volumetric flow rate (mm³/s)" msgstr "압출 압출량 (mm³/s)" msgid "Actual volumetric flow rate (mm³/s)" msgstr "실제 체적 유량 (mm³/s)" msgid "Seams" msgstr "재봉선" msgid "Filament changes" msgstr "필라멘트 변경" msgid "Options" msgstr "옵션" msgid "Cost" msgstr "비용" msgid "Filament change times" msgstr "필라멘트 변경 시간" # AI Translated msgid "Tool changes" msgstr "툴 체인지" msgid "Color change" msgstr "색 변경" msgctxt "Noun" msgid "Print" msgstr "출력" msgid "Printer" msgstr "프린터" msgid "Time Estimation" msgstr "추정 시간" msgid "Normal mode" msgstr "일반 모드" msgid "Total Filament" msgstr "총 필라멘트" msgid "Model Filament" msgstr "모델 필라멘트" msgid "Prepare time" msgstr "준비 시간" msgid "Model printing time" msgstr "모델 출력 시간" msgid "Show stealth mode" msgstr "스텔스 모드 표시" msgid "Show normal mode" msgstr "일반 모드 표시" msgid "" "An object is placed in the left/right nozzle-only area or exceeds the printable height of the left nozzle.\n" "Please ensure the filaments used by this object are not arranged to other nozzles." msgstr "" "객체가 왼쪽/오른쪽 노즐 전용 영역에 배치되었거나 왼쪽 노즐의 인쇄 가능 높이를 초과합니다.\n" "이 객체에서 사용하는 필라멘트가 다른 노즐에 배치되지 않았는지 확인하세요." msgid "" "An object is laid over the boundary of plate or exceeds the height limit.\n" "Please solve the problem by moving it totally on or off the plate, and confirming that the height is within the build volume." msgstr "" "객체가 플레이트 경계를 벗어나거나 높이 제한을 초과합니다.\n" "객체를 플레이트 위 또는 밖으로 완전히 이동하고 높이가 빌드 볼륨 내에 있는지 확인하세요." msgid "Variable layer height" msgstr "레이어 높이 가변" msgid "Adaptive" msgstr "적응형" msgid "Quality / Speed" msgstr "품질 / 속도" # AI Translated msgctxt "Mesh action" msgid "Smooth" msgstr "부드럽게" msgid "Radius" msgstr "반경" msgid "Keep min" msgstr "최소로 유지" msgid "Add detail" msgstr "세부정보 추가" msgid "Remove detail" msgstr "세부정보 삭제" msgid "Reset to base" msgstr "기본으로 초기화" msgid "Smoothing" msgstr "스무딩" msgid "Increase/decrease edit area" msgstr "편집 영역 증가/감소" msgid "Sequence" msgstr "순서" # AI Translated msgid "Object selection" msgstr "객체 선택" msgid "number keys" msgstr "숫자 키" msgid "Number keys can quickly change the color of objects" msgstr "숫자 키로 객체의 색상을 빠르게 변경할 수 있습니다" msgid "Following objects are laid over the boundary of plate or exceeds the height limit:\n" msgstr "다음 객체가 플레이트 경계를 벗어나거나 높이 제한을 초과합니다:\n" msgid "Please solve the problem by moving it totally on or off the plate, and confirming that the height is within the build volume.\n" msgstr "객체를 플레이트 위 또는 밖으로 완전히 이동하고 높이가 빌드 볼륨 내에 있는지 확인하세요.\n" #, c-format, boost-format msgid "The position or size of some models exceeds the %s's printable range." msgstr "일부 모델의 위치 또는 크기가 %s의 인쇄 가능 범위를 초과합니다." #, c-format, boost-format msgid "The position or size of the model %s exceeds the %s's printable range." msgstr "모델 %s의 위치 또는 크기가 %s의 인쇄 가능 범위를 초과합니다." msgid " Please check and adjust the part's position or size to fit the printable range:\n" msgstr " 파트의 위치 또는 크기를 인쇄 가능 범위에 맞게 확인하고 조정하세요:\n" #, boost-format msgid "Left nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%\n" msgstr "왼쪽 노즐: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%\n" #, boost-format msgid "Right nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%" msgstr "오른쪽 노즐: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%" msgid "Tool move" msgstr "툴 이동" msgid "Tool Rotate" msgstr "툴 회전" msgid "Move object" msgstr "객체 이동" msgid "Auto orientation options" msgstr "자동 방향 지정 옵션" msgid "Enable rotation" msgstr "회전 활성화" msgid "Optimize support interface area" msgstr "서포트 접점 영역 최적화" msgid "Orient" msgstr "방향" msgid "Arrange options" msgstr "정렬 옵션" msgid "0 means auto spacing." msgstr "0은 자동 간격을 의미합니다." msgid "Auto rotate for arrangement" msgstr "자동 회전 후 정렬" msgid "Allow multiple materials on same plate" msgstr "동일한 플레이트에 여러 재료 허용" msgid "Avoid extrusion calibration region" msgstr "압출 교정 영역을 피하세요" msgid "Align to Y axis" msgstr "Y축에 정렬" # AI Translated msgctxt "Camera View" msgid "Front" msgstr "앞" msgctxt "Camera View" msgid "Back" msgstr "뒷면" # AI Translated #. TRN To be shown in the main menu View->Top msgctxt "Camera View" msgid "Top" msgstr "위" # AI Translated #. TRN To be shown in the main menu View->Bottom msgctxt "Camera View" msgid "Bottom" msgstr "아래" msgctxt "Camera View" msgid "Left" msgstr "왼쪽" msgctxt "Camera View" msgid "Right" msgstr "오른쪽" msgid "Add" msgstr "추가" msgid "Add plate" msgstr "플레이트 추가" msgid "Auto orient all/selected objects" msgstr "모든/선택한 객체 자동 방향 지정" msgid "Auto orient all objects on current plate" msgstr "현재 플레이트의 모든 객체를 자동으로 방향 지정" msgid "Arrange all objects" msgstr "모든 객체 정렬" msgid "Arrange objects on selected plates" msgstr "선택한 플레이트의 객체 정렬" msgid "Split to objects" msgstr "객체로 분할" msgid "Assembly View" msgstr "조립 보기" msgid "Select Plate" msgstr "플레이트 선택" msgid "Slicing" msgstr "슬라이싱" msgid "Slice all" msgstr "모두 슬라이스" msgid "Failed" msgstr "실패" msgid "All Plates" msgstr "전체 플레이트" msgid "Stats" msgstr "통계" msgid "Slice" msgstr "슬라이스" # AI Translated msgid "Review" msgstr "검토" msgid "Assembly Return" msgstr "조립 되돌리기" msgid "Return" msgstr "돌아가기" msgid "Canvas Toolbar" msgstr "캔버스 도구 모음" msgid "Fit camera to scene or selected object." msgstr "장면 또는 선택한 객체에 카메라 맞추기." msgid "3D Navigator" msgstr "3D 네비게이터" msgid "Zoom button" msgstr "줌 버튼" msgid "Overhangs" msgstr "오버행" msgid "Outline" msgstr "외곽선" # AI Translated msgid "Wireframe" msgstr "와이어프레임" # AI Translated msgid "Realistic View" msgstr "사실적 보기" msgid "Perspective" msgstr "원근법" msgid "Axes" msgstr "축" msgid "Gridlines" msgstr "그리드 라인" msgid "Labels" msgstr "레이블" msgid "Paint Toolbar" msgstr "칠하기 도구 모음" msgid "Explosion Ratio" msgstr "분해 비율" msgid "Section View" msgstr "단면도" msgid "Assembly Control" msgstr "조립 제어" msgid "Selection Mode" msgstr "선택 모드" msgid "Total Volume:" msgstr "총 용량:" msgid "Assembly Info" msgstr "조립 정보" msgid "Volume:" msgstr "용량:" msgid "Size:" msgstr "크기:" #, c-format, boost-format msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)." msgstr "레이어 %d, Z = %.2lf mm에서 Gcode 경로 충돌이 발견되었습니다. 충돌하는 객체를 더 멀리 분리하세요 (%s <-> %s)." msgid "An object is laid over the plate boundaries." msgstr "객체가 플레이트 경계 위에 놓여 있습니다." msgid "A G-code path goes beyond the max print height." msgstr "Gcode 경로가 출력 최대 높이를 넘어갑니다." msgid "A G-code path goes beyond plate boundaries." msgstr "Gcode 경로가 플레이트 경계를 넘어갑니다." msgid "Not support printing 2 or more TPU filaments." msgstr "2개 이상의 TPU 필라멘트 인쇄는 지원되지 않습니다." #, c-format, boost-format msgid "Tool %d" msgstr "도구 %d" #, c-format, boost-format msgid "Filament %s is placed in the %s, but the generated G-code path exceeds the printable range of the %s." msgstr "필라멘트 %s이(가) %s에 배치되었지만 생성된 G-code 경로가 %s의 인쇄 가능 범위를 초과합니다." #, c-format, boost-format msgid "Filaments %s are placed in the %s, but the generated G-code path exceeds the printable range of the %s." msgstr "필라멘트 %s이(가) %s에 배치되었지만 생성된 G-code 경로가 %s의 인쇄 가능 범위를 초과합니다." #, c-format, boost-format msgid "Filament %s is placed in the %s, but the generated G-code path exceeds the printable height of the %s." msgstr "필라멘트 %s이(가) %s에 배치되었지만 생성된 G-code 경로가 %s의 인쇄 가능 높이를 초과합니다." #, c-format, boost-format msgid "Filaments %s are placed in the %s, but the generated G-code path exceeds the printable height of the %s." msgstr "필라멘트 %s이(가) %s에 배치되었지만 생성된 G-code 경로가 %s의 인쇄 가능 높이를 초과합니다." msgid "Open wiki for more information." msgstr "자세한 내용은 위키를 참조하세요." msgid "Only the object being edited is visible." msgstr "편집 중인 객체만 표시됩니다." #, c-format, boost-format msgid "Filaments %s cannot be printed directly on the surface of this plate." msgstr "필라멘트 %s은(는) 이 플레이트 표면에 직접 인쇄할 수 없습니다." msgid "PLA and PETG filaments detected in the mixture. Adjust parameters according to the Wiki to ensure print quality." msgstr "PLA와 PETG 필라멘트의 혼합이 감지되었습니다. 인쇄 품질을 보장하기 위해 위키에 따라 매개변수를 조정하세요." msgid "The prime tower extends beyond the plate boundary." msgstr "프라임 타워가 플레이트 경계를 초과합니다." msgid "Partial flushing volume set to 0. Multi-color printing may cause color mixing in models. Please readjust flushing settings." msgstr "부분 플러싱 볼륨이 0으로 설정되었습니다. 멀티컬러 인쇄 시 모델에 색상 혼합이 발생할 수 있습니다. 플러싱 설정을 재조정하세요." msgid "Click Wiki for help." msgstr "도움말은 위키를 클릭하세요." msgid "Click here to regroup" msgstr "재그룹핑하려면 여기를 클릭하세요" msgid "Flushing Volume" msgstr "플러싱 볼륨" msgid "Calibration step selection" msgstr "교정 단계 선택" msgid "Micro lidar calibration" msgstr "마이크로 라이다 교정" msgid "Bed leveling" msgstr "베드 레벨링" msgid "High-temperature Heatbed Calibration" msgstr "고온 히팅베드 보정" msgid "Nozzle clumping detection Calibration" msgstr "노즐 클럼핑 감지 보정" msgid "Calibration program" msgstr "교정 프로그램" msgid "" "The calibration program detects the status of your device automatically to minimize deviation.\n" "It keeps the device performing optimally." msgstr "" "교정 프로그램은 장치의 상태를 자동으로 감지하여 편차를 최소화합니다.\n" "이를 통해 장치가 최적의 성능을 유지하도록 합니다." msgid "Calibration Flow" msgstr "압출량 교정" msgid "Start Calibration" msgstr "교정 시작" msgid "Completed" msgstr "완료" msgid "Calibrating" msgstr "교정 중" msgid "No step selected" msgstr "선택한 단계가 없습니다" msgid "Auto-record Monitoring" msgstr "모니터링 자동 기록" msgid "Go Live" msgstr "실시간" msgid "Liveview Retry" msgstr "실시간 화면보기 재시도" msgid "Resolution" msgstr "해상도" msgid "Enable" msgstr "활성화" msgid "Hostname or IP" msgstr "호스트 이름 또는 IP" msgid "Custom camera source" msgstr "커스텀 카메라 소스" msgid "Show \"Live Video\" guide page." msgstr "라이브 비디오 가이드 페이지를 표시합니다." msgid "Connect Printer (LAN)" msgstr "프린터 연결(LAN)" msgid "Please input the printer access code:" msgstr "프린터 액세스 코드를 입력:" msgid "" "You can find it in \"Settings > Network > Access code\"\n" "on the printer, as shown in the figure:" msgstr "프린터의 \"설정 > 네트워크 > 액세스 코드\"에서 확인할 수 있습니다. 그림 참조:" msgid "" "You can find it in \"Setting > Setting > LAN only > Access Code\"\n" "on the printer, as shown in the figure:" msgstr "프린터의 \"설정 > 설정 > LAN 전용 > 액세스 코드\"에서 확인할 수 있습니다. 그림 참조:" msgid "Invalid input" msgstr "잘못된 입력입니다." msgid "New Window" msgstr "새로운 창" msgid "Open a new window" msgstr "새로운 창 열기" msgid "Closing application" msgstr "응용 프로그램 닫는 중" msgid "Closing Application while some presets are modified." msgstr "일부 사전 설정을 수정하는 동안 응용 프로그램을 닫습니다." msgid "Logging" msgstr "로깅" msgid "Prepare" msgstr "준비 하기" msgid "Preview" msgstr "미리 보기" msgid "Device" msgstr "장치" msgid "Multi-device" msgstr "멀티 디바이스" msgid "Project" msgstr "프로젝트" msgid "Yes" msgstr "예" msgid "No" msgstr "아니오" msgid "will be closed before creating a new model. Do you want to continue?" msgstr "새 모델을 생성하기 전에 닫힙니다. 계속하시겠습니까?" msgid "Slice plate" msgstr "플레이트 슬라이스" msgid "Print plate" msgstr "플레이트 출력" msgid "Export G-code file" msgstr "Gcode 파일 내보내기" msgctxt "Verb" msgid "Print" msgstr "출력" msgid "Export plate sliced file" msgstr "플레이트 슬라이스 파일 내보내기" msgid "Send" msgstr "전송" msgid "Export all sliced file" msgstr "모든 슬라이스 파일 내보내기" msgid "Print all" msgstr "모두 출력" msgid "Send all" msgstr "모두 전송" msgid "Send to Multi-device" msgstr "여러 장치로 보내기" msgid "Keyboard Shortcuts" msgstr "키보드 단축키" msgid "Show the list of keyboard shortcuts" msgstr "키보드 단축키 목록 표시" msgid "Setup Wizard" msgstr "설정 마법사" msgid "Show Configuration Folder" msgstr "설정 폴더 열기" # AI Translated msgid "Troubleshoot Center" msgstr "문제 해결 센터" msgid "Open Network Test" msgstr "네트워크 테스트 열기" msgid "Show Tip of the Day" msgstr "오늘의 팁 표시" msgid "Check for Updates" msgstr "업데이트 확인" #, c-format, boost-format msgid "&About %s" msgstr "%s 정보 (&A)" msgid "Upload Models" msgstr "모델 업로드" msgid "Download Models" msgstr "모델 다운로드" msgid "Default View" msgstr "기본 보기" msgid "Top View" msgstr "위에서 보기" msgid "Bottom View" msgstr "아래에서 보기" msgid "Front View" msgstr "앞에서 보기" # AI Translated msgctxt "Camera View" msgid "Rear" msgstr "뒷면" msgid "Rear View" msgstr "뒤에서 보기" msgid "Left View" msgstr "왼쪽에서 보기" msgid "Right View" msgstr "오른쪽에서 보기" msgid "Start a new window" msgstr "새 창에서 시작" msgid "New Project" msgstr "새 프로젝트" msgid "Start a new project" msgstr "새 프로젝트 시작" msgid "Open a project file" msgstr "프로젝트 파일 열기" msgid "Recent files" msgstr "최근 파일" msgid "Save Project" msgstr "프로젝트 저장" msgid "Save current project to file" msgstr "현재 프로젝트를 파일로 저장" msgid "Save Project as" msgstr "프로젝트 다른 이름으로 저장" msgid "Save current project as" msgstr "현재 프로젝트 다른 이름으로 저장" msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF" msgstr "3MF/STL/STEP/SVG/OBJ/AMF 가져오기" msgid "Load a model" msgstr "모델 불러오기" msgid "Import Zip Archive" msgstr "ZIP 압축파일 가져오기" msgid "Load models contained within a zip archive" msgstr "ZIP 압축파일에 포함된 모델 로드" msgid "Import Configs" msgstr "설정 가져오기" msgid "Load configs" msgstr "설정 불러오기" msgid "Import" msgstr "가져오기" msgid "Export all objects as one STL" msgstr "모든 객체를 하나의 STL로 내보내기" msgid "Export all objects as STLs" msgstr "모든 객체를 여러 STL로 내보내기" msgid "Export all objects as one DRC" msgstr "모든 객체를 하나의 DRC로 내보내기" msgid "Export all objects as DRCs" msgstr "모든 객체를 DRC로 내보내기" msgid "Export Generic 3MF" msgstr "일반 3MF 내보내기" msgid "Export 3MF file without using some 3mf-extensions" msgstr "일부 3MF 확장자를 사용하지 않고 3MF 파일 내보내기" msgid "Export current sliced file" msgstr "현재 슬라이스 파일 내보내기" msgid "Export all plate sliced file" msgstr "모든 플레이트의 슬라이스 파일 내보내기" msgid "Export G-code" msgstr "Gcode 내보내기" msgid "Export current plate as G-code" msgstr "현재 플레이트를 Gcode로 내보내기" msgid "Export toolpaths as OBJ" msgstr "툴 경로를 OBJ로 내보내기" msgid "Export Preset Bundle" msgstr "프리셋 번들 내보내기" msgid "Export current configuration to files" msgstr "현재 설정을 파일로 내보내기" msgid "Export" msgstr "내보내기" msgid "Quit" msgstr "종료" msgid "Undo" msgstr "실행 취소" msgid "Redo" msgstr "다시 실행" msgid "Cut" msgstr "잘라내기" msgid "Cut selection to clipboard" msgstr "잘라낸 항목을 클립보드에 복사" msgid "Copy" msgstr "복사" msgid "Copy selection to clipboard" msgstr "선택 항목을 클립보드에 복사" msgid "Paste" msgstr "붙여넣기" msgid "Paste clipboard" msgstr "클립보드 붙여넣기" msgid "Delete Selected" msgstr "선택된 항목 지우기" msgid "Deletes the current selection" msgstr "현재 선택 삭제" msgid "Deletes all objects" msgstr "모든 객체 삭제" msgid "Clone Selected" msgstr "선택된 객체 복제" msgid "Clone copies of selections" msgstr "선택된 객체의 복사본 복제" msgid "Duplicate Current Plate" msgstr "현재 플레이트 복제" msgid "Duplicate the current plate" msgstr "현재 플레이트 복제" msgid "Selects all objects" msgstr "모든 객체 선택" msgid "Deselects all objects" msgstr "모든 객체 선택 취소" msgid "Use Perspective View" msgstr "원근법 보기 사용" msgid "Use Orthogonal View" msgstr "평행 투영 보기 사용" msgid "Auto Perspective" msgstr "자동 시점" msgid "Automatically switch between orthographic and perspective when changing from top/bottom/side views." msgstr "상단/하단/측면 보기에서 변경할 때 직교와 투시 사이를 자동으로 전환합니다." msgid "Show &G-code Window" msgstr "Gcode 창 표시 (&G)" msgid "Show G-code window in Preview scene." msgstr "예측 장면에 Gcode 창 표시" msgid "Show 3D Navigator" msgstr "3D 내비게이터 표시" msgid "Show 3D navigator in Prepare and Preview scene." msgstr "준비 및 미리보기 장면에서 3D 내비게이터 표시" msgid "Show Gridlines" msgstr "그리드 라인 표시" msgid "Show Gridlines on plate" msgstr "플레이트에 그리드 라인 표시" msgid "Reset Window Layout" msgstr "창 레이아웃 재설정" msgid "Reset to default window layout" msgstr "기본 창 레이아웃으로 재설정" msgid "Show &Labels" msgstr "이름표 보기 (&L)" msgid "Show object labels in 3D scene." msgstr "3D 화면에 객체 이름표 표시" msgid "Show &Overhang" msgstr "오버행 보기 (&O)" msgid "Show object overhang highlight in 3D scene." msgstr "3D 장면에서 객체 오버행 하이라이트 표시" msgid "Show Selected Outline (beta)" msgstr "선택된 개요 표시(실험적)" msgid "Show outline around selected object in 3D scene." msgstr "3D 장면에서 선택한 객체 주변에 윤곽선 표시" msgid "Preferences" msgstr "기본 설정" # AI Translated msgctxt "Menu" msgid "Edit" msgstr "편집" msgid "View" msgstr "시점" # AI Translated msgid "Preset Bundle" msgstr "사전 설정 번들" # AI Translated msgid "Sync Presets" msgstr "사전 설정 동기화" # AI Translated msgid "Pull and apply the latest presets from OrcaCloud" msgstr "OrcaCloud에서 최신 사전 설정을 가져와 적용합니다" # AI Translated msgid "You must be logged in to sync presets from cloud." msgstr "클라우드에서 사전 설정을 동기화하려면 로그인해야 합니다." # AI Translated msgid "Syncing presets from cloud…" msgstr "클라우드에서 사전 설정 동기화 중…" msgid "Help" msgstr "도움말" msgid "Temperature Calibration" msgstr "온도 교정" msgid "Max flowrate" msgstr "최대 압출량" msgid "Pressure advance" msgstr "프레셔 어드밴스" msgid "Flow ratio" msgstr "압출량 비율" msgid "Flow Rate Calibration" msgstr "압출량 교정" msgid "Retraction" msgstr "후퇴" msgid "Cornering" msgstr "코너링" msgid "Cornering calibration" msgstr "코너링 보정" msgid "Input Shaping Frequency" msgstr "입력 셰이핑 주파수" msgid "Input Shaping Damping/zeta factor" msgstr "입력 셰이핑 감쇠/제타 계수" msgid "Input Shaping" msgstr "입력 셰이핑" msgid "VFA" msgstr "VFA" # AI Translated msgid "Calibration Guide" msgstr "교정 가이드" msgid "&Open G-code" msgstr "Gcode 열기 (&O)" msgid "Open a G-code file" msgstr "Gcode 파일 열기" msgid "Re&load from Disk" msgstr "디스크에서 다시 불러오기 (&l)" msgid "Reload the plater from disk" msgstr "디스크에서 플레이트 다시 로드" msgid "Export &Toolpaths as OBJ" msgstr "툴 경로를 OBJ로 내보내기 (&T)" msgid "Open &Slicer" msgstr "&Slicer 열기 (&O)" msgid "Open Slicer" msgstr "Slicer 열기" msgid "&Quit" msgstr "종료 (&Q)" #, c-format, boost-format msgid "Quit %s" msgstr "%s 종료" msgid "&File" msgstr "파일 (&F)" msgid "&View" msgstr "시점 (&V)" msgid "&Help" msgstr "도움말 (&H)" #, c-format, boost-format msgid "A file exists with the same name: %s. Do you want to overwrite it?" msgstr "같은 이름을 가진 파일이 존재합니다: %s, 덮어 쓰시겠습니까?" #, c-format, boost-format msgid "A config exists with the same name: %s. Do you want to overwrite it?" msgstr "같은 이름을 가진 설정이 존재합니다: %s, 덮어 쓰시겠습니까?" msgid "Overwrite file" msgstr "파일 덮어쓰기" msgid "Overwrite config" msgstr "구성 덮어쓰기" msgid "Yes to All" msgstr "모두 예" msgid "No to All" msgstr "모두 아니오" msgid "Choose a directory" msgstr "디렉토리 선택" #, c-format, boost-format msgid "There is %d config exported. (Only non-system configs)" msgid_plural "There are %d configs exported. (Only non-system configs)" msgstr[0] "%d개의 설정을 내보냈습니다. (비 시스템 설정만 해당)" msgid "Export Result" msgstr "결과 내보내기" msgid "Select profile to load:" msgstr "불러올 사전설정 선택:" # AI Translated msgid "Config files (*.json;*.zip;*.orca_printer;*.orca_bundle;*.orca_filament)|*.json;*.zip;*.orca_printer;*.orca_bundle;*.orca_filament" msgstr "설정 파일 (*.json;*.zip;*.orca_printer;*.orca_bundle;*.orca_filament)|*.json;*.zip;*.orca_printer;*.orca_bundle;*.orca_filament" #, c-format, boost-format msgid "There is %d config imported. (Only non-system and compatible configs)" msgid_plural "There are %d configs imported. (Only non-system and compatible configs)" msgstr[0] "%d개의 설정을 가져왔습니다. (비 시스템 및 호환 설정만 해당)" msgid "" "\n" "Hint: Make sure you have added the corresponding printer before importing the configs." msgstr "" "\n" "힌트: 구성을 가져오기 전에 해당 프린터를 추가했는지 확인하세요." msgid "Import result" msgstr "결과 가져오기" msgid "File is missing" msgstr "파일이 없습니다" msgid "The project is no longer available." msgstr "프로젝트를 더 이상 사용할 수 없습니다." # AI Translated msgid "" "Do you want to synchronize your personal data from Orca Cloud?\n" "It contains the following information:\n" "1. The Process presets\n" "2. The Filament presets\n" "3. The Printer presets" msgstr "" "Orca Cloud에서 개인 데이터를 동기화하시겠습니까?\n" "다음 정보가 포함됩니다:\n" "1. 프로세스 사전 설정\n" "2. 필라멘트 사전 설정\n" "3. 프린터 사전 설정" msgid "Synchronization" msgstr "동기화" msgid "The device cannot handle more conversations. Please retry later." msgstr "장치에서 더 많은 대화를 처리할 수 없습니다. 나중에 다시 시도해 주세요." msgid "Player is malfunctioning. Please reinstall the system player." msgstr "플레이어가 오작동합니다. 시스템 플레이어를 다시 설치하세요." msgid "The player is not loaded; please click the \"play\" button to retry." msgstr "플레이어가 로드되지 않았습니다. 다시 시도하려면 '재생' 버튼을 클릭하세요." # AI Translated msgid "The player is not loaded because the GStreamer GTK video sink is missing or failed to initialize." msgstr "GStreamer GTK 비디오 싱크가 없거나 초기화에 실패하여 플레이어가 로드되지 않았습니다." msgid "Please confirm if the printer is connected." msgstr "프린터가 연결되어 있는지 확인하세요." msgid "The printer is currently busy downloading. Please try again after it finishes." msgstr "프린터가 현재 다운로드 중입니다. 다운로드가 완료된 후 다시 시도하세요." msgid "Printer camera is malfunctioning." msgstr "프린터 카메라가 오작동합니다." msgid "A problem occurred. Please update the printer firmware and try again." msgstr "문제가 발생했습니다. 프린터 펌웨어를 업데이트하고 다시 시도하세요." msgid "LAN Only Liveview is off. Please turn on the liveview on printer screen." msgstr "LAN 전용 라이브뷰가 꺼져 있습니다. 프린터 화면에서 라이브뷰를 켜십시오." msgid "Please enter the IP of the printer to connect." msgstr "연결할 프린터의 IP를 입력하세요." msgid "Initializing..." msgstr "초기화 중..." msgid "Connection Failed. Please check the network and try again" msgstr "연결에 실패했습니다. 네트워크를 확인한 후 다시 시도하세요" msgid "Please check the network and try again. You can restart or update the printer if the issue persists." msgstr "네트워크를 확인하고 다시 시도해 보세요. 문제가 지속되면 프린터를 다시 시작하거나 업데이트할 수 있습니다." msgid "The printer has been logged out and cannot connect." msgstr "프린터가 로그아웃되어 연결할 수 없습니다." msgid "Video Stopped." msgstr "비디오가 중지되었습니다." msgid "LAN Connection Failed (Failed to start liveview)" msgstr "LAN 연결 실패(라이브뷰 시작 실패)" msgid "" "Virtual Camera Tools is required for this task!\n" "Do you want to install them?" msgstr "" "이 작업에는 가상 카메라 도구가 필요합니다!\n" "설치하시겠습니까?" msgid "Downloading Virtual Camera Tools" msgstr "가상 카메라 도구 다운로드" msgid "" "Another virtual camera is running.\n" "Orca Slicer supports only a single virtual camera.\n" "Do you want to stop this virtual camera?" msgstr "" "다른 가상 카메라가 실행 중입니다.\n" "Orca Slicer는 하나의 가상 카메라만 지원합니다.\n" "이 가상 카메라를 중지하시겠습니까?" #, c-format, boost-format msgid "Virtual camera initialize failed (%s)!" msgstr "가상 카메라 초기화 실패(%s)!" msgid "Network unreachable" msgstr "네트워크에 연결할 수 없음" msgid "Information" msgstr "정보" msgid "Playing..." msgstr "재생중...." msgid "Loading..." msgstr "로딩 중..." msgid "Year" msgstr "년" msgid "Month" msgstr "월" msgid "All Files" msgstr "모든 파일" msgid "Group files by year, recent first." msgstr "연별 그룹 파일, 최근 파일 순." msgid "Group files by month, recent first." msgstr "월별 그룹 파일, 최근 파일 순." msgid "Show all files, recent first." msgstr "모든 파일 표시, 최근 파일 순." msgid "Timelapse" msgstr "타임랩스" msgid "Switch to timelapse files." msgstr "타임랩스 파일로 전환합니다." msgid "Video" msgstr "비디오" msgid "Switch to video files." msgstr "비디오 파일로 전환합니다." msgid "Switch to 3MF model files." msgstr "3mf 모델 파일로 전환." msgid "Delete selected files from printer." msgstr "선택된 파일을 프린터에서 삭제합니다." msgid "Download" msgstr "다운로드" msgid "Download selected files from printer." msgstr "선택된 파일을 프린터에서 다운로드합니다." msgid "Batch manage files." msgstr "파일을 일괄 관리합니다." msgid "Reload file list from printer." msgstr "프린터에서 파일 목록을 다시 로드합니다." msgid "No printers." msgstr "프린터 없음." msgid "Loading file list..." msgstr "파일 목록 로드 중..." msgid "No files" msgstr "파일 없음" msgid "Load failed" msgstr "로드 실패" msgid "Browsing file in storage is not supported in current firmware. Please update the printer firmware." msgstr "현재 펌웨어에서는 저장 장치의 파일 탐색이 지원되지 않습니다. 프린터 펌웨어를 업데이트하세요." msgid "LAN Connection Failed (Failed to view sdcard)" msgstr "LAN 연결 실패 (sdcard를 볼 수 없음)" msgid "Browsing file in storage is not supported in LAN Only Mode." msgstr "LAN 전용 모드에서는 저장 장치의 파일 탐색이 지원되지 않습니다." #, c-format, boost-format msgid "You are going to delete %u file from printer. Are you sure to continue?" msgid_plural "You are going to delete %u files from printer. Are you sure to continue?" msgstr[0] "%u 파일을 삭제하려고 합니다. 계속하시겠습니까?" msgid "Delete files" msgstr "파일 삭제" #, c-format, boost-format msgid "Do you want to delete the file '%s' from printer?" msgstr "프린터에서 '%s' 파일을 삭제하시겠습니까?" msgid "Delete file" msgstr "파일 삭제" msgid "Fetching model information..." msgstr "모델 정보 가져오는 중..." msgid "Failed to fetch model information from printer." msgstr "프린터에서 모델 정보를 가져오지 못했습니다." msgid "Failed to parse model information." msgstr "모델 정보를 구문 분석하지 못했습니다." msgid "The .gcode.3mf file contains no G-code data. Please slice it with Orca Slicer and export a new .gcode.3mf file." msgstr ".gcode.3mf 파일에는 Gcode 데이터가 없습니다. OrcaSlicer에서 슬라이스하고 새 .gcode.3mf 파일을 내보내십시오." #, c-format, boost-format msgid "File '%s' was lost! Please download it again." msgstr "'%s' 파일이 손실되었습니다! 다시 다운로드하세요." #, c-format, boost-format msgid "" "File: %s\n" "Title: %s\n" msgstr "" "파일: %s\n" "제목: %s\n" msgid "Download waiting..." msgstr "다운로드 대기 중..." msgid "Play" msgstr "재생" msgid "Open Folder" msgstr "폴더 열기" msgid "Download finished" msgstr "다운로드 완료" #, c-format, boost-format msgid "Downloading %d%%..." msgstr "다운로드 중 %d%%..." msgid "Air Condition" msgstr "에어컨" msgid "Reconnecting the printer, the operation cannot be completed immediately, please try again later." msgstr "프린터를 다시 연결하는 중입니다. 작업을 즉시 완료할 수 없습니다. 나중에 다시 시도해 주세요." msgid "Timeout, please try again." msgstr "시간 초과입니다. 다시 시도하세요." msgid "File does not exist." msgstr "파일이 없습니다." msgid "File checksum error. Please retry." msgstr "파일 체크섬 오류입니다. 다시 시도해 주세요." msgid "Not supported on the current printer version." msgstr "현재 프린터 버전에서는 지원되지 않습니다." msgid "" "Please check if the storage is inserted into the printer.\n" "If it still cannot be read, you can try formatting the storage." msgstr "" "저장 장치가 프린터에 삽입되어 있는지 확인하세요.\n" "여전히 읽을 수 없는 경우 저장 장치 포맷을 시도해 보세요." msgid "The firmware version of the printer is too low. Please update the firmware and try again." msgstr "프린터의 펌웨어 버전이 너무 낮습니다. 펌웨어를 업데이트하고 다시 시도하세요." msgid "The file already exists, do you want to replace it?" msgstr "파일이 이미 존재합니다. 교체하시겠습니까?" msgid "Insufficient storage space, please clear the space and try again." msgstr "저장 공간이 부족합니다. 공간을 확보하고 다시 시도하세요." msgid "File creation failed, please try again." msgstr "파일 생성에 실패했습니다. 다시 시도하세요." msgid "File write failed, please try again." msgstr "파일 쓰기에 실패했습니다. 다시 시도하세요." msgid "MD5 verification failed, please try again." msgstr "MD5 검증에 실패했습니다. 다시 시도하세요." msgid "File renaming failed, please try again." msgstr "파일 이름 변경에 실패했습니다. 다시 시도하세요." msgid "File upload failed, please try again." msgstr "파일 업로드에 실패했습니다. 다시 시도하세요." #, c-format, boost-format msgid "Error code: %d" msgstr "오류 코드: %d" msgid "User cancels task." msgstr "사용자가 작업을 취소했습니다." msgid "Failed to read file, please try again." msgstr "파일 읽기에 실패했습니다. 다시 시도하세요." msgid "Speed:" msgstr "속도:" msgid "Deadzone:" msgstr "데드 존:" msgid "Options:" msgstr "옵션:" msgid "Zoom" msgstr "줌" msgid "Translation/Zoom" msgstr "변환/줌" msgid "3Dconnexion settings" msgstr "3D연결 설정" msgid "Swap Y/Z axes" msgstr "Y/Z 축 바꾸기" msgid "Invert X axis" msgstr "X축 반전" msgid "Invert Y axis" msgstr "Y축 반전" msgid "Invert Z axis" msgstr "Z축 반전" msgid "Invert Yaw axis" msgstr "수직축을 중심으로 반전" msgid "Invert Pitch axis" msgstr "횡축을 중심으로 반전" msgid "Invert Roll axis" msgstr "종축을 중심으로 반전" # AI Translated msgid "(LAN)" msgstr "(LAN)" msgid "Search" msgstr "검색" msgid "My Device" msgstr "내 장치" msgid "Other Device" msgstr "다른 장치" msgid "Online" msgstr "온라인" msgid "Input access code" msgstr "액세스 코드 입력" msgid "Can't find devices?" msgstr "내 장치를 찾을 수 없습니까?" msgid "Log out successful." msgstr "로그아웃에 성공했습니다." msgid "Offline" msgstr "오프라인" msgid "Busy" msgstr "사용중" msgid "Modifying the device name" msgstr "장치 이름 수정" msgid "Name is invalid;" msgstr "이름이 잘못되었습니다;" msgid "illegal characters:" msgstr "잘못된 문자:" msgid "illegal suffix:" msgstr "잘못된 접미사:" msgid "The name field is not allowed to be empty." msgstr "이름은 비워 둘 수 없습니다." msgid "The name is not allowed to start with a space." msgstr "이름은 공백으로 시작할 수 없습니다." msgid "The name is not allowed to end with a space." msgstr "이름은 공백으로 끝날 수 없습니다." msgid "The name is not allowed to exceed 32 characters." msgstr "이름은 32자를 초과할 수 없습니다." msgid "Bind with Pin Code" msgstr "핀 코드로 바인딩" msgid "Bind with Access Code" msgstr "액세스 코드로 바인딩" msgctxt "Quit_Switching" msgid "Quit" msgstr "종료" msgid "Switching..." msgstr "전환 중..." msgid "Switching failed" msgstr "전환 실패" msgid "Printing progress" msgstr "출력 진행률" msgid "Parts Skip" msgstr "파트 건너뛰기" msgid "Stop" msgstr "정지" msgid "Layer: N/A" msgstr "레이어: N/A" msgid "Click to view thermal preconditioning explanation" msgstr "열 사전 조건 설명을 보려면 클릭하세요" msgid "Clear" msgstr "지우기" msgid "" "You have completed printing the mall model, \n" "but synchronizing rating information has failed." msgstr "" "쇼핑몰 모델 출력이 완료되었으나,\n" "등급 정보 동기화에 실패했습니다." msgid "How do you like this printing file?" msgstr "이 출력 파일이 마음에 드시나요?" msgid "(The model has already been rated. Your rating will overwrite the previous rating.)" msgstr "(해당 모델은 이미 평가되었습니다. 귀하의 평가가 이전 평가를 덮어쓰게 됩니다.)" msgid "Rate" msgstr "평가" msgid "Camera" msgstr "카메라" msgid "Storage" msgstr "저장 장치" msgid "Camera Setting" msgstr "카메라 설정" msgid "Switch Camera View" msgstr "카메라 보기 전환" msgid "Control" msgstr "제어" msgid "Printer Parts" msgstr "프린터 부품" msgid "Print Options" msgstr "출력 옵션" msgid "Safety Options" msgstr "안전 옵션" msgid "Hotends" msgstr "핫엔드" msgid "Lamp" msgstr "조명" msgid "Bed" msgstr "베드" msgid "Debug Info" msgstr "디버그 정보" msgid "Filament loading..." msgstr "필라멘트 로딩 중..." msgid "No Storage" msgstr "저장 장치 없음" msgid "Storage Abnormal" msgstr "저장 장치 이상" msgid "Cancel print" msgstr "출력 취소" msgid "Are you sure you want to stop this print?" msgstr "이 인쇄를 중지하시겠습니까?" msgid "The printer is busy with another print job." msgstr "프린터가 다른 출력 작업을 수행 중입니다" msgid "When printing is paused, filament loading and unloading are only supported for external slots." msgstr "인쇄가 일시 중지되면 필라멘트 로딩 및 언로딩은 외부 슬롯에서만 지원됩니다." msgid "Current extruder is busy changing filament." msgstr "현재 익스트루더가 필라멘트 교체 중입니다." # AI Translated msgid "\"Load\" or \"Unload\" is not supported for external spool while using Filament Track Switch." msgstr "Filament Track Switch를 사용하는 동안에는 외부 스풀에서 \"로드\" 또는 \"언로드\"가 지원되지 않습니다." # AI Translated msgid "The Filament Track Switch has not been setup. Please setup on printer." msgstr "Filament Track Switch가 설정되지 않았습니다. 프린터에서 설정하십시오." msgid "Current slot has already been loaded." msgstr "현재 슬롯은 이미 로드되었습니다." msgid "The selected slot is empty." msgstr "선택한 슬롯이 비어 있습니다." msgid "Printer 2D mode does not support 3D calibration" msgstr "프린터 2D 모드에서는 3D 보정을 지원하지 않습니다" msgid "Downloading..." msgstr "다운로드 중..." msgid "Cloud Slicing..." msgstr "클라우드 슬라이싱..." #, c-format, boost-format msgid "In Cloud Slicing Queue, there are %s tasks ahead of you." msgstr "클라우드 슬라이싱 대기열에는 %s개의 작업이 앞에 있습니다." #, c-format, boost-format msgid "Layer: %s" msgstr "레이어: %s" #, c-format, boost-format msgid "Layer: %d/%d" msgstr "레이어: %d/%d" msgid "Please heat the nozzle to above 170℃ before loading or unloading filament." msgstr "필라멘트를 로드하거나 언로드하기 전에 노즐을 170도 이상으로 가열하세요." msgid "Chamber temperature cannot be changed in cooling mode while printing." msgstr "인쇄 중 냉각 모드에서는 챔버 온도를 변경할 수 없습니다." msgid "If the chamber temperature exceeds 40℃, the system will automatically switch to heating mode. Please confirm whether to switch." msgstr "챔버 온도가 40℃를 초과하면 시스템이 자동으로 가열 모드로 전환됩니다. 전환하시겠습니까?" msgid "Please select an AMS slot before calibration" msgstr "교정하기 전에 AMS 슬롯을 선택하세요" msgid "Cannot read filament info: the filament is loaded to the tool head. Please unload the filament and try again." msgstr "필라멘트 정보를 읽을 수 없음: 필라멘트가 툴 헤드에 로드되었습니다. 필라멘트를 언로드하고 다시 시도하세요." msgid "This only takes effect during printing" msgstr "출력하는 동안에만 적용됩니다" msgid "Silent" msgstr "조용한" msgid "Sport" msgstr "스포츠" msgid "Ludicrous" msgstr "루디크러스" msgid "Turning off the lights during the task will cause the failure of AI monitoring, like spaghetti detection. Please choose carefully." msgstr "작업 중에 조명을 끄면 스파게티 감지와 같은 AI 모니터링이 실패합니다. 신중하게 선택하세요." msgid "Keep it On" msgstr "켜둔 채로 유지" msgid "Turn it Off" msgstr "끄기" msgid "Can't start this without storage." msgstr "저장 장치 없이는 시작할 수 없습니다." msgid "Rate the Print Profile" msgstr "출력 사전설정 평가" msgid "Comment" msgstr "댓글" msgid "Rate this print" msgstr "이 출력물을 평가해 주세요" msgid "Add Photo" msgstr "사진 추가" msgid "Delete Photo" msgstr "사진 삭제" # AI Translated msgid "Select Images" msgstr "이미지 선택" # AI Translated msgid "Image files (*.png;*.jpg;*jpeg)|*.png;*.jpg;*.jpeg" msgstr "이미지 파일 (*.png;*.jpg;*jpeg)|*.png;*.jpg;*.jpeg" msgid "Submit" msgstr "제출" msgid "Please click on the star first." msgstr "먼저 별점을 클릭해주세요." msgid "Get oss config failed." msgstr "OSS 구성 가져오기에 실패했습니다." msgid "Upload Pictures" msgstr "사진 업로드" msgid "Number of images successfully uploaded" msgstr "성공적으로 업로드된 이미지 수" msgid " upload failed" msgstr " 업로드 실패" msgid " upload config prase failed\n" msgstr " 구성 업로드 실패\n" msgid " No corresponding storage bucket\n" msgstr " 해당 스토리지 버킷이 없습니다.\n" msgid " cannot be opened\n" msgstr " 열 수 없습니다\n" msgid "" "The following issues occurred during the process of uploading images. Do you want to ignore them?\n" "\n" msgstr "" "이미지 업로드 과정에서 아래와 같은 문제가 발생했습니다. 무시하시겠습니까?\n" "\n" msgid "info" msgstr "정보" msgid "Synchronizing the printing results. Please retry a few seconds later." msgstr "출력 결과를 동기화하는 중입니다. 몇 초 후에 다시 시도하세요." msgid "Upload failed\n" msgstr "업로드 실패\n" msgid "Obtaining instance_id failed\n" msgstr "instance_id를 가져오지 못했습니다.\n" msgid "" "Your comment result cannot be uploaded due to the following reasons:\n" "\n" " error code: " msgstr "" "다음과 같은 몇 가지 이유로 귀하의 댓글 결과를 업로드할 수 없습니다.:\n" "\n" " 에러 코드: " msgid "error message: " msgstr "에러 메시지: " msgid "" "\n" "\n" "Would you like to redirect to the webpage to give a rating?" msgstr "" "\n" "\n" "평가를 위해 웹페이지로 이동하시겠습니까?" msgid "Some of your images failed to upload. Would you like to redirect to the webpage to give a rating?" msgstr "일부 이미지를 업로드하지 못했습니다. 평가를 위해 웹페이지로 리디렉션하시겠습니까?" msgid "You can select up to 16 images." msgstr "최대 16개의 이미지를 선택할 수 있습니다." msgid "" "At least one successful print record of this print profile is required \n" "to give a positive rating (4 or 5 stars)." msgstr "" "긍정적인 평가(별4개 또는 5개)를 제공하려면\n" "이 출력 사전 설정의 성공적인 출력 기록이 하나 이상 필요합니다." msgid "click to add machine" msgstr "클릭하여 기기 추가" msgid "Status" msgstr "상태" msgctxt "Firmware" msgid "Update" msgstr "업데이트" msgid "Assistant(HMS)" msgstr "어시스턴트(HMS)" #, c-format, boost-format msgid "Network plug-in v%s" msgstr "네트워크 플러그인 v%s" #, c-format, boost-format msgid "Network plug-in v%s (%s)" msgstr "네트워크 플러그인 v%s (%s)" msgid "Don't show again" msgstr "다시 표시하지 않음" msgid "Go to" msgstr "이동" msgid "Later" msgstr "나중에" #, c-format, boost-format msgid "%s error" msgstr "%s 에러" #, c-format, boost-format msgid "%s has encountered an error" msgstr "%s 에 오류가 발생했습니다" #, c-format, boost-format msgid "%s warning" msgstr "%s 경고" #, c-format, boost-format msgid "%s has a warning" msgstr "%s 에 경고가 있습니다" #, c-format, boost-format msgid "%s info" msgstr "%s 정보" #, c-format, boost-format msgid "%s information" msgstr "%s 정보" msgid "Skip" msgstr "건너뛰기" msgid "Newer 3MF version" msgstr "최신 3MF 버전" msgid "The 3MF file version is in Beta and it is newer than the current OrcaSlicer version." msgstr "3mf 파일 버전은 베타 버전이며 현재 OrcaSlicer 버전보다 최신 버전입니다." msgid "If you would like to try Orca Slicer Beta, you may click to" msgstr "Orca Slicer Beta를 사용해 보려면 다음을 클릭하세요" msgid "Download Beta Version" msgstr "베타 버전 다운로드" msgid "The 3MF file version is newer than the current OrcaSlicer version." msgstr "3mf 파일 버전은 현재 Orca Slicer 버전보다 최신 버전입니다." msgid "Updating your OrcaSlicer could enable all functionality in the 3MF file." msgstr "Orca Slicer를 업데이트하면 3MF 파일의 모든 기능을 활성화할 수 있습니다." msgid "Current Version: " msgstr "현재 버전: " msgid "Latest Version: " msgstr "최신 버전: " msgctxt "Software" msgid "Update" msgstr "업데이트" msgid "Not for now" msgstr "건너뛰기" msgid "Server Exception" msgstr "서버 예외" msgid "The server is unable to respond. Please click the link below to check the server status." msgstr "서버가 응답할 수 없습니다. 아래 링크를 클릭하여 서버 상태를 확인하세요." msgid "If the server is in a fault state, you can temporarily use offline printing or local network printing." msgstr "서버가 장애 상태인 경우 오프라인 출력 또는 로컬 네트워크 출력를 일시적으로 사용할 수 있습니다." msgid "How to use LAN only mode" msgstr "LAN 전용 모드 사용 방법" msgid "Don't show this dialog again" msgstr "이 대화 상자를 다시 표시하지 마세요." msgid "Please refer to Wiki before use->" msgstr "사용하기 전에 Wiki를 참조하십시오->" msgid "3D Mouse disconnected." msgstr "3D 마우스가 분리됨." # AI Translated msgid "A new configuration is available. Update now?" msgstr "새 구성을 사용할 수 있습니다. 지금 업데이트하시겠습니까?" msgid "Integration was successful." msgstr "통합에 성공했습니다." msgid "Integration failed." msgstr "통합에 실패했습니다." msgid "Undo integration was successful." msgstr "통합 실행 취소에 성공했습니다." msgid "New network plug-in available." msgstr "새로운 네트워크 플러그인을 사용할 수 있습니다." msgid "Details" msgstr "세부 사항" msgid "New printer config available." msgstr "새로운 프린터 구성을 사용할 수 있습니다." msgid "Undo integration failed." msgstr "통합 실행 취소에 실패했습니다." msgid "Exporting" msgstr "내보내는중." msgid "An update is available!" msgstr "새 버전의 소프트웨어가 있습니다." msgid "Go to download page" msgstr "다운로드 페이지로 이동합니다." msgid "Open Folder." msgstr "폴더 열기." msgid "Safely remove hardware." msgstr "하드웨어를 안전하게 제거합니다." #, c-format, boost-format msgid "%1$d Object has custom supports." msgid_plural "%1$d Objects have custom supports." msgstr[0] "%1$d 객체에 사용자 정의 서포트가 있습니다." #, c-format, boost-format msgid "%1$d Object has color painting." msgid_plural "%1$d Objects have color painting." msgstr[0] "%1$d 객체에 컬러 페인팅이 있습니다." #, c-format, boost-format msgid "%1$d object was loaded as a part of cut object." msgid_plural "%1$d objects were loaded as parts of cut object." msgstr[0] "%1$d 객체가 잘라낸 객체의 부품으로 로드되었습니다." # AI Translated #, c-format, boost-format msgid "%1$d object was loaded with fuzzy skin painting." msgid_plural "%1$d objects were loaded with fuzzy skin painting." msgstr[0] "%1$d개의 객체를 퍼지 스킨 칠하기와 함께 불러왔습니다." msgid "ERROR" msgstr "오류" msgid "COMPLETED" msgstr "완료됨" msgid "CANCELED" msgstr "취소됨" msgid "Cancel upload" msgstr "업로드 취소" msgid "Jump to" msgstr "다음으로 이동" msgid "Error:" msgstr "오류:" msgid "Warning:" msgstr "경고:" msgid "Exported successfully" msgstr "내보내기 성공." msgid "Model file downloaded." msgstr "모델 파일이 다운로드되었습니다." # AI Translated msgid "Pull" msgstr "가져오기" # AI Translated msgid "Force push" msgstr "강제 푸시" # AI Translated msgid "Shared profiles may be available for this printer." msgstr "이 프린터에 사용할 수 있는 공유 프로필이 있을 수 있습니다." # AI Translated msgid "Browse shared profiles" msgstr "공유 프로필 찾아보기" msgid "Serious warning:" msgstr "심각한 경고:" msgid " (Repair)" msgstr " (수리)" msgid " Click here to install it." msgstr " 설치하려면 여기를 클릭하세요." msgid "WARNING:" msgstr "경고:" msgid "Your model needs support! Please enable support material." msgstr "모델에 서포트가 필요합니다! 서포트를 활성화하세요." msgid "G-code path overlap" msgstr "Gcode 경로 겹침" msgid "Cut connectors" msgstr "잘라내기 커넥터" msgid "Layers" msgstr "레이어" msgid "The application cannot run normally because OpenGL version is lower than 3.2.\n" msgstr "OpenGL 버전이 3.2 미만이므로 애플리케이션이 정상적으로 실행될 수 없습니다.\n" msgid "Please upgrade your graphics card driver." msgstr "그래픽 카드 드라이버를 업그레이드하세요." msgid "Unsupported OpenGL version" msgstr "지원되지 않는 OpenGL 버전" #, c-format, boost-format msgid "" "Unable to load shaders:\n" "%s" msgstr "" "셰이더를 로드할 수 없습니다:\n" "%s" msgid "Error loading shaders" msgstr "셰이더 로드 오류" msgctxt "Layers" msgid "Top" msgstr "상부" msgctxt "Layers" msgid "Bottom" msgstr "하부" # AI Translated msgid "Plugin Selection" msgstr "플러그인 선택" # AI Translated msgid "" "No plugins capabilities available for this type.\n" "Enable or install some to use." msgstr "" "이 유형에 사용할 수 있는 플러그인 기능이 없습니다.\n" "사용하려면 기능을 활성화하거나 설치하십시오." # AI Translated msgid "There is stringing-prone filament in the current print job. Enabling nozzle clumping detection now may degrade print quality. Are you sure you want to enable it?" msgstr "현재 출력 작업에 실 늘어짐이 발생하기 쉬운 필라멘트가 있습니다. 지금 노즐 뭉침 감지를 활성화하면 출력 품질이 저하될 수 있습니다. 활성화하시겠습니까?" # AI Translated msgid "Enable Nozzle Clumping Detection" msgstr "노즐 뭉침 감지 활성화" # AI Translated msgid "When enabled, the printer will automatically capture photos of printed parts and upload them to the cloud. Would you like to enable this option?" msgstr "활성화하면 프린터가 출력물 사진을 자동으로 촬영하여 클라우드에 업로드합니다. 이 옵션을 활성화하시겠습니까?" # AI Translated msgid "Confirm Enable Print Status Snapshot" msgstr "출력 상태 스냅샷 활성화 확인" msgid "Enable detection of build plate position" msgstr "빌드 플레이트 위치 감지 활성화" msgid "The localization tag of the build plate will be detected, and printing will be paused if the tag is not in predefined range." msgstr "빌드 플레이트의 현지화 태그가 감지되고 태그가 사전 설정된 범위를 벗어나면 출력이 일시 정지됩니다." msgid "Build Plate Detection" msgstr "빌드 플레이트 감지" msgid "Identifies the type and position of the build plate on the heatbed. Pausing printing if a mismatch is detected." msgstr "히팅베드의 빌드 플레이트 유형과 위치를 식별합니다. 불일치가 감지되면 인쇄를 일시 중지합니다." # AI Translated msgid "Purifies the chamber air as the print finishes, based on the selected mode." msgstr "선택한 모드에 따라 출력이 끝날 때 챔버 공기를 정화합니다." # AI Translated msgid "Purifies the chamber air through internal circulation as each print finishes." msgstr "각 출력이 끝날 때 내부 순환을 통해 챔버 공기를 정화합니다." # AI Translated msgid "Automatically match the corresponding switch strategy for leak-prone filaments (disable blob detection) and regular filaments (enable blob detection)." msgstr "누출이 발생하기 쉬운 필라멘트(블롭 감지 비활성화)와 일반 필라멘트(블롭 감지 활성화)에 맞는 전환 전략을 자동으로 적용합니다." # AI Translated msgid "Detect whether the nozzle is wrapped by filament or other foreign matter." msgstr "노즐이 필라멘트나 다른 이물질로 감싸였는지 감지합니다." # AI Translated msgid "After disabling, nozzle wrapping cannot be detected, which may lead to print failure or nozzle damage." msgstr "비활성화하면 노즐 감김을 감지할 수 없어 출력 실패나 노즐 손상으로 이어질 수 있습니다." msgid "AI Detections" msgstr "AI 감지" msgid "Printer will send assistant message or pause printing if any of the following problem is detected." msgstr "다음 문제가 감지되면 프린터가 어시스턴트 메시지를 보내거나 인쇄를 일시 중지합니다." msgid "Enable AI monitoring of printing" msgstr "출력 AI 모니터링 활성화" msgid "Pausing Sensitivity:" msgstr "일시 중지 감도:" msgid "Spaghetti Detection" msgstr "스파게티 감지" msgid "Detect spaghetti failures (scattered lose filament)." msgstr "스파게티 결함 감지(흩어진 느슨한 필라멘트)." msgid "Purge Chute Pile-Up Detection" msgstr "퍼지 슈트 적재 감지" msgid "Monitor if the waste is piled up in the purge chute." msgstr "퍼지 슈트에 폐기물이 쌓여 있는지 모니터링합니다." msgid "Nozzle Clumping Detection" msgstr "노즐 응집 감지" msgid "Check if the nozzle is clumping by filaments or other foreign objects." msgstr "필라멘트나 기타 이물질로 인한 노즐 클럼핑을 확인합니다." msgid "Detects air printing caused by nozzle clogging or filament grinding." msgstr "노즐 막힘이나 필라멘트 마모로 인한 에어 인쇄를 감지합니다." msgid "First Layer Inspection" msgstr "첫 레이어 검사" msgid "Auto-recover from step loss" msgstr "손실 단계부터 자동 복구" msgid "Store Sent Files on External Storage" msgstr "외부 저장 장치에 전송 파일 저장" # AI Translated msgid "Save the printing files sent from the slicer and other apps on External Storage" msgstr "슬라이서 및 다른 앱에서 전송된 출력 파일을 외부 저장 장치에 저장합니다" msgid "Allow Prompt Sound" msgstr "프롬프트 소리 허용" msgid "Filament Tangle Detection" msgstr "필라멘트 엉킴 감지" msgid "Check if the nozzle is clumping by filament or other foreign objects." msgstr "노즐에 필라멘트나 기타 이물질이 뭉쳐져 있는지 확인하세요." # AI Translated msgid "Purify Air at Print End" msgstr "출력 종료 시 공기 정화" # AI Translated msgid "Internal Circulation" msgstr "내부 순환" # AI Translated msgid "Alignment Detection" msgstr "정렬 감지" # AI Translated msgid "Pauses printing when build plate misalignment is detected." msgstr "빌드 플레이트의 정렬 불량이 감지되면 출력을 일시 중지합니다." # AI Translated msgid "Foreign Object Detection" msgstr "이물질 감지" # AI Translated msgid "Checks for any objects on the build plate at the start of a print to avoid collisions." msgstr "충돌을 방지하기 위해 출력 시작 시 빌드 플레이트 위에 물체가 있는지 확인합니다." # AI Translated msgid "Printed Part Displacement Detection" msgstr "출력물 이탈 감지" # AI Translated msgid "Monitors the printed part during printing and alerts immediately if it shifts or collapses." msgstr "출력 중 출력물을 모니터링하여 이동하거나 무너지면 즉시 알립니다." # AI Translated msgid "Checks if the nozzle is clumping by filament or other foreign objects." msgstr "노즐에 필라멘트나 다른 이물질이 뭉쳐 있는지 확인합니다." msgid "On" msgstr "켜기" msgid "Open Door Detection" msgstr "도어 열림 감지" msgid "Notification" msgstr "알림" msgid "Pause printing" msgstr "인쇄 일시 중지" # AI Translated msgid "Print Status Snapshot" msgstr "출력 상태 스냅샷" # AI Translated msgid "Automatically capture and upload print photos, showing defects during printing and the final result for remote viewing." msgstr "출력 사진을 자동으로 촬영하고 업로드하여 출력 중 발생한 결함과 최종 결과를 원격으로 확인할 수 있습니다." msgctxt "Nozzle Type" msgid "Type" msgstr "유형" msgctxt "Nozzle Diameter" msgid "Diameter" msgstr "직경" msgctxt "Nozzle Flow" msgid "Flow" msgstr "플로우" msgid "Please change the nozzle settings on the printer." msgstr "프린터의 노즐 설정을 변경하세요." msgid "Brass" msgstr "황동" msgid "High flow" msgstr "고유량" # AI Translated msgid "TPU High flow" msgstr "TPU 고유량" msgid "No wiki link available for this printer." msgstr "이 프린터에 사용 가능한 위키 링크가 없습니다." msgid "Unavailable while heating maintenance function is on." msgstr "가열 유지보수 기능이 켜져 있는 동안에는 사용할 수 없습니다." msgid "Idle Heating Protection" msgstr "유휴 가열 보호" msgid "Stops heating automatically after 5 mins of idle to ensure safety." msgstr "안전을 위해 5분 유휴 후 자동으로 가열을 중지합니다." msgid "Global" msgstr "전역" msgid "Objects" msgstr "객체" # AI Translated msgid "Cycle settings visibility" msgstr "설정 표시 방식 순환" msgid "Compare presets" msgstr "사전 설정 비교" msgid "View all object's settings" msgstr "모든 객체 설정 보기" msgid "Material settings" msgstr "재료 설정" msgid "Remove current plate (if not last one)" msgstr "현재 플레이트 제거(마지막 플레이트가 아닌 경우)" msgid "Auto orient objects on current plate" msgstr "현재 플레이트의 객체 자동 방향 지정" msgid "Arrange objects on current plate" msgstr "현재 플레이트의 객체 정렬" msgid "Unlock current plate" msgstr "현재 플레이트 잠금 해제" msgid "Lock current plate" msgstr "현재 플레이트 잠금" msgid "Filament grouping" msgstr "필라멘트 그룹핑" msgid "Edit current plate name" msgstr "현재 번호판 이름 수정" msgid "Move plate to the front" msgstr "플레이트를 앞쪽으로 이동" msgid "Customize current plate" msgstr "사용자 정의 플레이트" #, c-format, boost-format msgid "The %s nozzle can not print %s." msgstr "%s 노즐은 %s 을 인쇄할 수 없습니다." #, boost-format msgid "Mixing %1% with %2% in printing is not recommended.\n" msgstr "%1%와 %2% 혼합 출력을 권장하지 않습니다.\n" msgid " nozzle" msgstr "노즐" #, boost-format msgid "It is not recommended to print the following filament(s) with %1%: %2%\n" msgstr "다음 필라멘트로 출력하지 않는 것이 좋습니다: %1%%2%\n" msgid "It is not recommended to use the following nozzle and filament combinations:\n" msgstr "다음과 같은 노즐과 필라멘트 조합은 사용하지 않는 것이 좋습니다.\n" #, boost-format msgid "%1% with %2%\n" msgstr "%1%와 %2%\n" #, boost-format msgid " plate %1%:" msgstr " 플레이트 %1%:" msgid "Invalid name, the following characters are not allowed:" msgstr "잘못된 이름입니다. 다음 문자는 사용할 수 없습니다:" msgid "Sliced Info" msgstr "슬라이스 정보" msgid "Used Filament (m)" msgstr "필라멘트 사용 (m)" msgid "Used Filament (mm³)" msgstr "필라멘트 사용 (mm³)" msgid "Used Filament (g)" msgstr "필라멘트 사용 (g)" msgid "Used Materials" msgstr "재료 사용" msgid "Estimated time" msgstr "추정 시간" msgid "Set the number of AMS installed on the nozzle." msgstr "노즐에 설치된 AMS의 개수를 설정합니다." msgid "AMS(4 slots)" msgstr "AMS(4 슬롯)" msgid "AMS(1 slot)" msgstr "AMS(1 슬롯)" msgid "Not installed" msgstr "설치되지 않음" # AI Translated msgid "The software does not support using different diameter of nozzles for one print. If the left and right nozzles are inconsistent, we can only proceed with single-head printing. Please confirm which nozzle you would like to use for this project." msgstr "이 소프트웨어는 한 번의 출력에 서로 다른 직경의 노즐을 사용하는 것을 지원하지 않습니다. 왼쪽과 오른쪽 노즐이 서로 다르면 단일 헤드 출력으로만 진행할 수 있습니다. 이 프로젝트에 사용할 노즐을 확인해 주십시오." msgid "Switch diameter" msgstr "직경 스위치" msgid "Configuration incompatible" msgstr "호환되지 않는 구성" # AI Translated msgid "Filament switcher detected. All AMS filaments are now available for both extruders. The slicer will auto-assign for optimal printing." msgstr "필라멘트 스위처가 감지되었습니다. 이제 모든 AMS 필라멘트를 양쪽 압출기에서 사용할 수 있습니다. 슬라이서가 최적의 출력을 위해 자동으로 할당합니다." # AI Translated msgid "A filament switcher is detected but not calibrated and thus currently unavailable. Please calibrate it on the printer and synchronize before use." msgstr "필라멘트 스위처가 감지되었지만 교정되지 않아 현재 사용할 수 없습니다. 프린터에서 교정하고 동기화한 후 사용하십시오." msgid "Tips" msgstr "팁" msgid "Sync printer information" msgstr "프린터 정보 동기화" msgid "" "The currently selected machine preset is inconsistent with the connected printer type.\n" "Are you sure to continue syncing?" msgstr "" "현재 선택한 컴퓨터 사전 설정이 연결된 프린터 유형과 일치하지 않습니다.\n" "동기화를 계속하시겠습니까?" msgid "There are unset nozzle types. Please set the nozzle types of all extruders before synchronizing." msgstr "설정되지 않은 노즐 유형이 있습니다. 동기화하기 전에 모든 압출기의 노즐 유형을 설정하세요." msgid "Sync extruder infomation" msgstr "압출기 정보 동기화" msgid "Connection" msgstr "연결" msgid "Synchronize nozzle information and the number of AMS" msgstr "노즐 정보 및 AMS 개수 동기화" msgid "Click to edit preset" msgstr "클릭하여 사전 설정 편집" msgid "Nozzle" msgstr "노즐" msgid "Project Filaments" msgstr "프로젝트 필라멘트" # AI Translated msgid "Purge mode" msgstr "퍼지 모드" msgid "Flushing volumes" msgstr "버리기 볼륨" msgid "Add one filament" msgstr "필라멘트 한개 추가" msgid "Remove last filament" msgstr "마지막 필라멘트 제거" msgid "Synchronize filament list from AMS" msgstr "AMS에서 필라멘트 목록 동기화" msgid "Set filaments to use" msgstr "사용할 필라멘트 설정" msgid "Search plate, object and part." msgstr "플레이트, 객체 및 부품을 검색합니다." msgid "Pellets" msgstr "펠릿" #, c-format, boost-format msgid "After completing your operation, %s project will be closed and create a new project." msgstr "작업을 완료하면 %s 프로젝트가 닫히고 새 프로젝트가 만들어집니다." msgid "There are no compatible filaments, and sync is not performed." msgstr "호환되는 필라멘트가 없으며 동기화가 수행되지 않습니다." msgid "Sync filaments with AMS" msgstr "AMS와 필라멘트 동기화" # AI Translated msgid "" "There are some unknown or incompatible filaments mapped to generic preset.\n" "Please update Orca Slicer or restart Orca Slicer to check if there is an update to system presets." msgstr "" "알 수 없거나 호환되지 않는 필라멘트가 일반 사전 설정에 매핑되었습니다.\n" "Orca Slicer를 업데이트하거나 다시 시작하여 시스템 사전 설정 업데이트가 있는지 확인하십시오." # AI Translated msgid "Only filament color information has been synchronized from printer." msgstr "프린터에서 필라멘트 색상 정보만 동기화되었습니다." msgid "Filament type and color information have been synchronized, but slot information is not included." msgstr "필라멘트 유형 및 색상 정보는 동기화되었지만 슬롯 정보는 포함되지 않았습니다." #, boost-format msgid "Do you want to save changes to \"%1%\"?" msgstr "변경 사항을 \"%1%\"에 저장하시겠습니까?" #, c-format, boost-format msgid "Successfully unmounted. The device %s (%s) can now be safely removed from the computer." msgstr "성공적으로 마운트 해제되었습니다. 이제 %s (%s) 장치를 컴퓨터에서 안전하게 제거할 수 있습니다." # AI Translated #, c-format, boost-format msgid "Ejecting of device %s (%s) has failed." msgstr "장치 %s (%s)을(를) 꺼내지 못했습니다." msgid "Previously unsaved items have been detected. Do you want to restore them?" msgstr "저장되지 않은 이전 프로젝트가 감지되었습니다. 복원하시겠습니까?" msgid "Restore" msgstr "복원" msgid "The current heatbed temperature is relatively high. The nozzle may clog when printing this filament in a closed environment. Please open the front door and/or remove the upper glass." msgstr "현재 베드 온도가 상대적으로 높습니다. 닫힌 공간에서 이 필라멘트를 출력할 때 노즐이 막힐 수 있습니다. 전면 도어를 열거나 상단 유리를 제거하세요." msgid "The nozzle hardness required by the filament is higher than the default nozzle hardness of the printer. Please replace the hardened nozzle or filament, otherwise, the nozzle will be worn down or damaged." msgstr "필라멘트에 필요한 노즐 경도가 프린터의 기본 노즐 경도보다 높습니다. \"경화강\" 노즐을 사용하거나 필라멘트를 교체하세요. 그렇지 않으면 노즐이 마모되거나 손상됩니다." msgid "Enabling traditional timelapse photography may cause surface imperfections. It is recommended to change to smooth mode." msgstr "기존 타임랩스 사진을 사용하면 표면 결함이 발생할 수 있습니다. 유연 모드로 변경하는 것이 좋습니다." msgid "Smooth mode for timelapse is enabled, but the prime tower is off, which may cause print defects. Please enable the prime tower, re-slice and print again." msgstr "타임랩스용 스무드 모드가 활성화되어 있지만 프라임 타워가 꺼져 있어 출력 결함이 발생할 수 있습니다. 프라임 타워를 활성화하고 다시 슬라이스한 후 다시 출력하세요." msgid "Expand sidebar" msgstr "사이드바 확장" msgid "Collapse sidebar" msgstr "사이드바 접기" # AI Translated msgid "Tab" msgstr "탭" #, c-format, boost-format msgid "Loading file: %s" msgstr "파일 로드 중: %s" msgid "Load 3MF" msgstr "3mf 불러오기" # AI Translated msgid "BambuStudio Project" msgstr "BambuStudio 프로젝트" msgid "The 3MF is not supported by OrcaSlicer, loading geometry data only." msgstr "이 3mf는 OrcaSlicer에서 지원되지 않습니다. 형상 데이터만 불러옵니다." msgid "The 3MF file was generated by an old OrcaSlicer version, loading geometry data only." msgstr "이 3mf는 이전 Orca Slicer에서 생성되었으며, 형상 데이터만 로드합니다." # AI Translated msgid "The 3MF file was generated by an older version, loading geometry data only." msgstr "이 3MF 파일은 이전 버전에서 생성되었습니다. 형상 데이터만 불러옵니다." # AI Translated msgid "The 3MF file was generated by BambuStudio, loading geometry data only." msgstr "이 3MF 파일은 BambuStudio에서 생성되었습니다. 형상 데이터만 불러옵니다." # AI Translated msgid "This project was created with an OrcaSlicer 2.3.1-alpha and uses infill rotation template settings that may not work properly with your current infill pattern. This could result in weak support or print quality issues." msgstr "이 프로젝트는 OrcaSlicer 2.3.1-alpha로 생성되었으며, 현재 채우기 패턴에서는 제대로 작동하지 않을 수 있는 채우기 회전 템플릿 설정을 사용합니다. 그 결과 지지력이 약해지거나 출력 품질 문제가 발생할 수 있습니다." # AI Translated msgid "Would you like OrcaSlicer to automatically fix this by clearing the rotation template settings?" msgstr "OrcaSlicer가 회전 템플릿 설정을 지워 이 문제를 자동으로 해결하도록 하시겠습니까?" #, c-format, boost-format msgid "The 3MF file version %s is newer than %s's version %s, found the following unrecognized keys:" msgstr "3mf의 버전 %s이(가) %s의 버전 %s보다 높습니다. 다음 키를 인식할 수 없습니다:" msgid "You should update your software.\n" msgstr "소프트웨어를 업그레이드하는 것이 좋습니다.\n" #, c-format, boost-format msgid "The 3MF file version %s is newer than %s's version %s, we suggest to upgrade your software." msgstr "3mf의 %s 버전이 %s의 %s 버전보다 최신입니다. 소프트웨어를 업그레이드 하십시오." # AI Translated #, c-format, boost-format msgid "The 3MF was created by BambuStudio (version %s), which is newer than the compatible version %s. Found unrecognized settings:" msgstr "이 3MF는 BambuStudio(버전 %s)에서 생성되었으며, 이는 호환 버전 %s보다 최신입니다. 인식할 수 없는 설정을 찾았습니다:" # AI Translated #, c-format, boost-format msgid "The 3MF was created by BambuStudio (version %s), which is newer than the compatible version %s. Some settings may not be fully compatible." msgstr "이 3MF는 BambuStudio(버전 %s)에서 생성되었으며, 이는 호환 버전 %s보다 최신입니다. 일부 설정이 완전히 호환되지 않을 수 있습니다." # AI Translated msgid "The 3MF was created by BambuStudio. Some settings may differ from OrcaSlicer." msgstr "이 3MF는 BambuStudio에서 생성되었습니다. 일부 설정이 OrcaSlicer와 다를 수 있습니다." msgid "Invalid values found in the 3MF:" msgstr "3mf에서 잘못된 값이 발견됨:" msgid "Please correct them in the Param tabs" msgstr "매개변수 탭에서 수정하세요" msgid "The 3MF has the following modified G-code in filament or printer presets:" msgstr "3mf에는 필라멘트 또는 프린터 사전 설정에 다음과 같은 수정된 Gcode가 있습니다:" msgid "Please confirm that all modified G-code is safe to prevent any damage to the machine!" msgstr "이 수정된 Gcode가 손상을 방지하기 위해 안전한지 확인하세요.장치!" msgid "Modified G-code" msgstr "수정된 Gcode" msgid "The 3MF has the following customized filament or printer presets:" msgstr "3mf에는 다음과 같은 맞춤형 필라멘트 또는 프린터 사전 설정이 있습니다:" msgid "Please confirm that the G-code within these presets is safe to prevent any damage to the machine!" msgstr "이러한 사전 설정 내의 Gcode가 기계 손상을 방지할 수 있도록 안전한지 확인하세요!" msgid "Customized Preset" msgstr "사용자 정의 프리셋" # AI Translated msgid "Component name(s) inside step file not in UTF8 format!" msgstr "STEP 파일 내부의 구성 요소 이름이 UTF8 형식이 아닙니다!" # AI Translated msgid "Because of unsupported text encoding, garbage characters may appear!" msgstr "지원되지 않는 텍스트 인코딩으로 인해 깨진 문자가 표시될 수 있습니다!" msgid "Remember my choice." msgstr "선택 기억하기." #, boost-format msgid "Failed loading file \"%1%\". An invalid configuration was found." msgstr "파일 \"%1%\"를 로드하지 못했습니다. 잘못된 구성이 발견되었습니다." msgid "Objects with zero volume removed" msgstr "부피가 0인 객체가 제거됨" msgid "The volume of the object is zero" msgstr "물체의 부피는 0입니다" #, c-format, boost-format msgid "" "The object from file %s is too small, and may be in meters or inches.\n" " Do you want to scale to millimeters?" msgstr "" "%s 파일의 객체가 너무 작습니다. 단위가 미터나 인치일 수 있습니다.\n" " mm 단위로 확장하시겠습니까?" msgid "Object too small" msgstr "객체가 너무 작음" msgid "" "This file contains several objects positioned at multiple heights.\n" "Instead of considering them as multiple objects, should \n" "the file be loaded as a single object with multiple parts?" msgstr "" "이 파일에는 여러 높이에 배치된 여러 객체가 포함되어 있습니다.\n" "여러 객체로 간주하는 대신\n" "파일을 여러 부품이 있는 단일 객체로 로드하시겠습니까?" msgid "Multi-part object detected" msgstr "여러 부품으로 구성된 객체 감지됨" msgid "Load these files as a single object with multiple parts?\n" msgstr "이 파일을 여러 부품이 있는 단일 객체로 로드하시겠습니까?\n" msgid "An object with multiple parts was detected" msgstr "여러 부품으로 구성된 객체가 감지되었습니다" # AI Translated msgid "Auto-Drop" msgstr "자동 내려놓기" # AI Translated #, c-format, boost-format msgid "Connected printer is %s. It must match the project preset for printing.\n" msgstr "연결된 프린터는 %s입니다. 출력하려면 프로젝트 사전 설정과 일치해야 합니다.\n" # AI Translated msgid "Do you want to sync the printer information and automatically switch the preset?" msgstr "프린터 정보를 동기화하고 사전 설정을 자동으로 전환하시겠습니까?" msgid "The file does not contain any geometry data." msgstr "파일에 형상 데이터가 포함되어 있지 않습니다." msgid "Your object appears to be too large, do you want to scale it down to fit the print bed automatically?" msgstr "객체가 너무 큽니다. 자동으로 고온 베드에 맞게 크기를 줄이시겠습니까?" msgid "Object too large" msgstr "객체가 너무 큼" msgid "Export STL file:" msgstr "STL 파일 내보내기:" # AI Translated msgid "Export Draco file:" msgstr "Draco 파일 내보내기:" msgid "Export AMF file:" msgstr "AMF 파일 내보내기:" msgid "Save file as" msgstr "파일을 다른 이름으로 저장:" msgid "Export OBJ file:" msgstr "OBJ 파일 내보내기:" #, c-format, boost-format msgid "" "The file %s already exists.\n" "Do you want to replace it?" msgstr "" "파일 %s가 이미 존재합니다.\n" "파일을 바꾸시겠습니까?" msgid "Confirm Save As" msgstr "다른 이름으로 저장 확인" msgid "Delete object which is a part of cut object" msgstr "잘라낸 객체의 일부인 객체 삭제" msgid "" "You are trying to delete an object which is a part of a cut object.\n" "This action will break a cut correspondence.\n" "After that, model consistency can't be guaranteed." msgstr "" "잘라낸 객체의 일부인 객체를 삭제하려고 합니다.\n" "이 작업을 수행하면 잘라낸 객체간 연결이 끊어집니다.\n" "그 이후 모델의 일관성은 보장되지 않습니다." # AI Translated msgid "Delete Object" msgstr "객체 삭제" # AI Translated msgid "Delete All Objects" msgstr "모든 객체 삭제" # AI Translated msgid "Reset Project" msgstr "프로젝트 초기화" msgid "The selected object couldn't be split." msgstr "선택한 객체를 분할할 수 없습니다." # AI Translated msgid "Split to Objects" msgstr "객체로 분할" # AI Translated msgid "Disable Auto-Drop to preserve Z positioning?\n" msgstr "Z 위치를 유지하기 위해 자동 내려놓기를 비활성화하시겠습니까?\n" # AI Translated msgid "Object with floating parts was detected" msgstr "떠 있는 부품이 있는 객체가 감지되었습니다" msgid "Another export job is running." msgstr "다른 내보내기 작업이 실행 중입니다." msgid "Unable to replace with more than one volume" msgstr "한 개 이상의 볼륨으로 교체할 수 없습니다" msgid "Error during replacement" msgstr "교체 중 오류 발생" msgid "Replace from:" msgstr "다음에서 교체:" msgid "Select a new file" msgstr "새 파일 선택" msgid "File for the replacement wasn't selected" msgstr "대체할 파일이 선택되지 않았습니다" # AI Translated msgid "Replace with 3D file" msgstr "3D 파일로 교체" # AI Translated msgid "Select folder to replace from" msgstr "교체할 파일이 있는 폴더 선택" # AI Translated msgid "Directory for the replace wasn't selected" msgstr "교체할 디렉터리가 선택되지 않았습니다" # AI Translated msgid "Replaced with 3D files from directory:\n" msgstr "다음 디렉터리의 3D 파일로 교체했습니다:\n" # AI Translated #, c-format msgid "✖ Skipped %s: same file.\n" msgstr "✖ 건너뜀 %s: 동일한 파일입니다.\n" # AI Translated #, c-format msgid "✖ Skipped %s: file does not exist.\n" msgstr "✖ 건너뜀 %s: 파일이 존재하지 않습니다.\n" # AI Translated #, c-format msgid "✖ Skipped %s: failed to replace.\n" msgstr "✖ 건너뜀 %s: 교체하지 못했습니다.\n" # AI Translated #, c-format msgid "✔ Replaced %s.\n" msgstr "✔ %s을(를) 교체했습니다.\n" # AI Translated msgid "Replaced volumes" msgstr "교체된 볼륨" msgid "Please select a file" msgstr "파일을 선택하세요" msgid "Do you want to replace it" msgstr "교체하시겠습니까" msgid "Message" msgstr "메시지" msgid "Reload from:" msgstr "다음에서 새로고침:" msgid "Unable to reload:" msgstr "새로고침할 수 없음:" msgid "Error during reload" msgstr "새로고침 중 오류가 발생했습니다" # AI Translated msgid "Reload all" msgstr "모두 다시 불러오기" msgid "There are warnings after slicing models:" msgstr "모델을 슬라이싱한 후 경고 발생:" msgid "warnings" msgstr "경고" msgid "Invalid data" msgstr "유효하지 않은 데이터" msgid "Slicing Canceled" msgstr "슬라이싱 취소됨" #, c-format, boost-format msgid "Slicing Plate %d" msgstr "플레이트 슬라이싱 %d" msgid "Please resolve the slicing errors and publish again." msgstr "슬라이싱 오류를 해결하고 다시 시도하세요." # AI Translated msgid "Network plug-in switched successfully." msgstr "네트워크 플러그인을 성공적으로 전환했습니다." # AI Translated msgid "Success" msgstr "성공" # AI Translated msgid "Failed to load network plug-in. Please restart the application." msgstr "네트워크 플러그인을 로드하지 못했습니다. 애플리케이션을 다시 시작하십시오." msgid "The network plug-in was not detected. Network related features are unavailable." msgstr "네트워크 플러그인이 감지되지 않습니다. 네트워크 관련 기능을 사용할 수 없습니다." msgid "" "Preview only mode:\n" "The loaded file contains G-code only, cannot enter the Prepare page." msgstr "" "미리 보기 전용 모드:\n" "불러온 파일에 Gcode만 포함되어 있습니다. 준비 페이지에 들어갈 수 없습니다." # AI Translated msgid "" "The nozzle type and AMS quantity information has not been synced from the connected printer.\n" "After syncing, software can optimize printing time and filament usage when slicing.\n" "Would you like to sync now?" msgstr "" "연결된 프린터에서 노즐 유형 및 AMS 수량 정보가 동기화되지 않았습니다.\n" "동기화하면 슬라이싱 시 출력 시간과 필라멘트 사용량을 최적화할 수 있습니다.\n" "지금 동기화하시겠습니까?" msgid "Sync now" msgstr "지금 동기화" msgid "You can keep the modified presets for the new project or discard them" msgstr "수정된 사전 설정을 새 프로젝트에 유지하거나 삭제할 수 있습니다" msgid "Creating a new project" msgstr "새 프로젝트 생성" msgid "Load project" msgstr "프로젝트 불러오기" msgid "" "Failed to save the project.\n" "Please check whether the folder exists online or if other programs have the project file open." msgstr "" "프로젝트를 저장하지 못했습니다.\n" "폴더가 온라인에 존재하는지 또는 다른 프로그램이 프로젝트 파일을 사용 중인지 확인하세요." msgid "Save project" msgstr "프로젝트 저장" msgid "Importing Model" msgstr "모델 가져오는 중" msgid "Preparing 3MF file..." msgstr "3mf 파일 준비..." msgid "Download failed; unknown file format." msgstr "다운로드에 실패했습니다. 파일 형식을 알 수 없습니다." msgid "Downloading project..." msgstr "프로젝트 다운로드 중 ..." msgid "Download failed; File size exception." msgstr "다운로드에 실패했습니다. 파일 크기 예외입니다." #, c-format, boost-format msgid "Project downloaded %d%%" msgstr "프로젝트 %d%% 다운로드됨" msgid "Importing to Orca Slicer failed. Please download the file and manually import it." msgstr "Orca Slicer로 가져오는 데 실패했습니다. 파일을 다운로드하여 수동으로 가져오세요." msgid "INFO:" msgstr "정보:" msgid "No accelerations provided for calibration. Use default acceleration value " msgstr "보정을 위해 가속도가 제공되지 않습니다. 기본 가속도 값 사용 " msgid "No speeds provided for calibration. Use default optimal speed " msgstr "보정을 위한 속도가 제공되지 않습니다. 기본 최적 속도 사용 " msgid "Import SLA archive" msgstr "SLA 압축파일 가져오기" msgid "The selected file" msgstr "선택한 파일" msgid "Does not contain valid G-code." msgstr "유효한 Gcode를 포함하지 않습니다." msgid "An Error has occurred while loading the G-code file." msgstr "Gcode 파일을 로드하는 중 오류가 발생했습니다" #. TRN %1% is archive path #, boost-format msgid "Loading of a ZIP archive on path %1% has failed." msgstr "경로 %1%에 ZIP 아카이브를 로드하지 못했습니다." #. TRN: First argument = path to file, second argument = error description #, boost-format msgid "Failed to unzip file to %1%: %2%" msgstr "파일을 %1%으로 압축 해제하지 못했습니다: %2%" #, boost-format msgid "Failed to find unzipped file at %1%. Unzipping of file has failed." msgstr "%1%에서 압축 해제된 파일을 찾지 못했습니다. 파일 압축 해제에 실패했습니다." msgid "Drop project file" msgstr "프로젝트 파일 삭제" msgid "Please select an action" msgstr "작업을 선택하세요" msgid "Open as project" msgstr "프로젝트로 열기" msgid "Import geometry only" msgstr "형상만 가져오기" msgid "Only one G-code file can be opened at a time." msgstr "동시에 하나의 Gcode 파일만 열 수 있습니다." msgid "G-code loading" msgstr "Gcode 불러오는 중" msgid "G-code files and models cannot be loaded together!" msgstr "Gcode 파일은 모델과 함께 로드할 수 없습니다!" msgid "Unable to add models in preview mode" msgstr "미리보기 모드에서는 모델을 추가할 수 없습니다!" msgid "All objects will be removed, continue?" msgstr "모든 객체가 제거됩니다. 계속하시겠습니까?" msgid "The current project has unsaved changes. Would you like to save before continuing?" msgstr "현재 프로젝트에 저장되지 않은 변경 사항이 있습니다. 계속하기 전에 저장하시겠습니까?" msgid "Number of copies:" msgstr "복제본 수:" msgid "Copies of the selected object" msgstr "선택한 객체의 복제본" msgid "Save G-code file as:" msgstr "Gcode 파일을 다음으로 저장:" msgid "Save SLA file as:" msgstr "SLA 파일을 다음으로 저장:" msgid "The provided file name is not valid." msgstr "제공된 파일 이름이 유효하지 않습니다." msgid "The following characters are not allowed by a FAT file system:" msgstr "다음 문자는 FAT 파일 시스템에서 허용되지 않음:" msgid "Save Sliced file as:" msgstr "슬라이스 파일을 다음으로 저장:" #, c-format, boost-format msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer." msgstr "%s 파일이 프린터의 저장 공간으로 전송되었으며 프린터에서 볼 수 있습니다." msgid "The nozzle type is not set. Please set the nozzle and try again." msgstr "노즐 유형이 설정되지 않았습니다. 노즐을 설정하고 다시 시도하세요." msgid "The nozzle type is not set. Please check." msgstr "노즐 유형이 설정되지 않았습니다. 확인해 주세요." msgid "Unable to perform boolean operation on model meshes. Only positive parts will be kept. You may fix the meshes and try again." msgstr "모델 메시에 대해 부울 연산을 수행할 수 없습니다. 긍정적인 부분만 유지됩니다. 메시를 수정하고 재시도해 볼 수 있습니다." #, boost-format msgid "Reason: part \"%1%\" is empty." msgstr "이유: \"%1%\" 부분이 비어 있습니다." #, boost-format msgid "Reason: part \"%1%\" does not bound a volume." msgstr "이유: \"%1%\" 부분이 볼륨을 바인딩하지 않습니다." #, boost-format msgid "Reason: part \"%1%\" has self intersection." msgstr "이유: 부품 \"%1%\"에 자체 교차가 있습니다." #, boost-format msgid "Reason: \"%1%\" and another part have no intersection." msgstr "이유: \"%1%\"과(와) 다른 부분에는 교차점이 없습니다." msgid "Unable to perform boolean operation on model meshes. Only positive parts will be exported." msgstr "모델 메시에 부울 연산을 수행할 수 없습니다. 오직 양수 부품만 내보내집니다." # AI Translated msgid "Flashforge host is not available." msgstr "Flashforge 호스트를 사용할 수 없습니다." # AI Translated msgid "Unable to log in to the Flashforge printer." msgstr "Flashforge 프린터에 로그인할 수 없습니다." msgid "Is the printer ready? Is the print sheet in place, empty and clean?" msgstr "프린터가 준비됐나요? 출력 시트가 제자리에 있고 비어 있고 깨끗합니까?" msgid "Upload and Print" msgstr "업로드 및 출력" msgid "Abnormal print file data. Please slice again" msgstr "비정상적인 출력 파일 데이터입니다. 다시 슬라이스하세요" msgid "" "Print By Object: \n" "We suggest using auto-arrange to avoid collisions when printing." msgstr "" "객체별 출력:\n" "출력 시 충돌을 방지하기 위해 자동 정렬을 사용할 것을 제안합니다." msgid "Send G-code" msgstr "Gcode 전송" msgid "Send to printer" msgstr "프린터로 전송" msgid "Custom supports and color painting were removed before repairing." msgstr "수리 전 사용자 정의 서포트와 컬러 페인트가 제거되었습니다." msgid "Optimize Rotation" msgstr "회전 최적화" #, c-format, boost-format msgid "Printer not connected. Please go to the device page to connect %s before syncing." msgstr "프린터가 연결되지 않았습니다. 동기화하기 전에 장치 페이지로 이동하여 %s를 연결하세요." # AI Translated #, c-format, boost-format msgid "OrcaSlicer can't connect to %s. Please check if the printer is powered on and connected to the network." msgstr "OrcaSlicer가 %s에 연결할 수 없습니다. 프린터의 전원이 켜져 있고 네트워크에 연결되어 있는지 확인하십시오." #, c-format, boost-format msgid "The currently connected printer on the device page is not %s. Please switch to %s before syncing." msgstr "장치 페이지의 현재 연결된 프린터가 %s이 아닙니다. 동기화하기 전에 %s로 전환하세요." msgid "There are no filaments on the printer. Please load the filaments on the printer first." msgstr "프린터에 필라멘트가 없습니다. 먼저 프린터에 필라멘트를 로드하세요." msgid "The filaments on the printer are all unknown types. Please go to the printer screen or software device page to set the filament type." msgstr "프린터의 필라멘트가 모두 알 수 없는 유형입니다. 프린터 화면 또는 소프트웨어 장치 페이지로 이동하여 필라멘트 유형을 설정하세요." msgid "Device Page" msgstr "디바이스 페이지" msgid "Synchronize AMS Filament Information" msgstr "AMS 필라멘트 정보 동기화" # AI Translated msgid "OrcaCloud plugins required by the current preset are not installed:" msgstr "현재 사전 설정에 필요한 OrcaCloud 플러그인이 설치되어 있지 않습니다:" # AI Translated msgid "Install Plugins" msgstr "플러그인 설치" # AI Translated msgid "Local plugins required by the current preset are missing:" msgstr "현재 사전 설정에 필요한 로컬 플러그인이 없습니다:" # AI Translated msgid "Find on OrcaCloud" msgstr "OrcaCloud에서 찾기" # AI Translated msgid "Plugins required by the current preset are not activated:" msgstr "현재 사전 설정에 필요한 플러그인이 활성화되지 않았습니다:" # AI Translated msgid "Activate Now" msgstr "지금 활성화" # AI Translated msgid "The installed plugin does not provide the required capability — it may be outdated:" msgstr "설치된 플러그인이 필요한 기능을 제공하지 않습니다. 버전이 오래되었을 수 있습니다:" # AI Translated msgid "Preparing to install plugins..." msgstr "플러그인 설치 준비 중..." # AI Translated msgid "Installing plugins" msgstr "플러그인 설치 중" # AI Translated msgid "Cancelling — finishing the current plugin..." msgstr "취소하는 중 — 현재 플러그인을 마무리하고 있습니다..." # AI Translated #, boost-format msgid "Installing %1%..." msgstr "%1% 설치 중..." msgid "Plate Settings" msgstr "플레이트 설정" #, boost-format msgid "Number of currently selected parts: %1%\n" msgstr "현재 선택된 부품 수: %1%\n" #, boost-format msgid "Number of currently selected objects: %1%\n" msgstr "현재 선택된 객체 수: %1%\n" #, boost-format msgid "Part name: %1%\n" msgstr "부품 이름: %1%\n" #, boost-format msgid "Object name: %1%\n" msgstr "객체 이름: %1%\n" #, boost-format msgid "Size: %1% x %2% x %3% in\n" msgstr "크기: %1% x %2% x %3% in\n" #, boost-format msgid "Size: %1% x %2% x %3% mm\n" msgstr "크기: %1% x %2% x %3% mm\n" #, boost-format msgid "Volume: %1% in³\n" msgstr "부피: %1% in³\n" #, boost-format msgid "Volume: %1% mm³\n" msgstr "부피: %1% mm³\n" #, boost-format msgid "Triangles: %1%\n" msgstr "삼각형: %1%\n" # AI Translated msgid "Use \"Fix Model\" to repair the mesh." msgstr "\"모델 수정\"을 사용하여 메시를 복구하십시오." #, c-format, boost-format msgid "Plate %d: %s is not suggested for use printing filament %s (%s). If you still want to do this print job, please set this filament's bed temperature to a number that is not zero." msgstr "%d: %s플레이트는 %s(%s)필라멘트를 출력하는데 사용하지 않는 것이 좋습니다. 이 출력을 계속하려면 이 필라멘트의 베드 온도를 0이 아닌 값으로 설정하세요." msgid "Currently, the object configuration form cannot be used with a multiple-extruder printer." msgstr "현재 개체 구성 양식은 다중 압출기 프린터와 함께 사용할 수 없습니다." msgid "Not available" msgstr "사용 불가" msgid "isometric" msgstr "아이소메트릭" # AI Translated msgid "top_front" msgstr "상단 전면" msgid "top" msgstr "상단" msgid "bottom" msgstr "하단" msgid "front" msgstr "앞" msgid "rear" msgstr "뒤" msgid "Switching languages requires the application to restart.\n" msgstr "언어를 전환하려면 애플리케이션을 다시 시작해야 합니다.\n" msgid "Do you want to continue?" msgstr "계속하시겠습니까?" msgid "Language selection" msgstr "언어 선택" msgid "Switching application language while some presets are modified." msgstr "일부 사전 설정이 수정되는 동안 응용 프로그램 언어를 전환합니다." msgid "Asia-Pacific" msgstr "아시아 태평양" msgid "China" msgstr "중국" msgid "Europe" msgstr "유럽" msgid "North America" msgstr "북아메리카" msgid "Others" msgstr "기타" msgid "Changing the region will log you out of your account.\n" msgstr "지역을 변경하면 계정에서 로그아웃됩니다.\n" msgid "Region selection" msgstr "지역 선택" # AI Translated msgid "sec" msgstr "초" msgid "The period of backup in seconds." msgstr "백업 기간(초)입니다." msgid "Bed Temperature Difference Warning" msgstr "침대 온도 차이 경고" msgid "" "Using filaments with significantly different temperatures may cause:\n" "• Extruder clogging\n" "• Nozzle damage\n" "• Layer adhesion issues\n" "\n" "Continue with enabling this feature?" msgstr "" "온도가 크게 다른 필라멘트를 사용하면 발생할 수 있습니다:\n" "- 압출기 막힘\n" "- 노즐 손상\n" "- 레이어 접착 문제\n" "\n" "이 기능을 계속 사용하시겠습니까?" msgid "Browse" msgstr "탐색" # AI Translated msgid "Choose folder for downloaded items" msgstr "다운로드한 항목을 저장할 폴더 선택" msgid "Choose Download Directory" msgstr "다운로드 폴더 선택" # AI Translated #, c-format, boost-format msgid "" "You've selected network plug-in version %s.\n" "\n" "Would you like to download and install this version now?\n" "\n" "Note: The application may need to restart after installation." msgstr "" "네트워크 플러그인 버전 %s을(를) 선택했습니다.\n" "\n" "이 버전을 지금 다운로드하여 설치하시겠습니까?\n" "\n" "참고: 설치 후 애플리케이션을 다시 시작해야 할 수 있습니다." # AI Translated msgid "Download Network Plug-in" msgstr "네트워크 플러그인 다운로드" # AI Translated msgid "Reload the network plug-in without restarting the application" msgstr "애플리케이션을 다시 시작하지 않고 네트워크 플러그인을 다시 로드합니다" # AI Translated msgid "Network plug-in reloaded successfully." msgstr "네트워크 플러그인을 성공적으로 다시 로드했습니다." # AI Translated msgid "Reload" msgstr "다시 로드" # AI Translated msgid "Failed to reload network plug-in. Please restart the application." msgstr "네트워크 플러그인을 다시 로드하지 못했습니다. 애플리케이션을 다시 시작하십시오." # AI Translated msgid "Reload Failed" msgstr "다시 로드 실패" msgid "Associate" msgstr "링크" msgid "with OrcaSlicer so that Orca can open models from" msgstr "를 OrcaSlicer와 연결하여 Orca가 다음 사이트의 모델을 열 수 있게 합니다" msgid "Current Association: " msgstr "현재 연결: " msgid "Current Instance" msgstr "현재 인스턴스" msgid "Current Instance Path: " msgstr "현재 인스턴스 경로: " msgid "General" msgstr "일반" msgid "Metric" msgstr "미터법" msgid "Imperial" msgstr "야드파운드법" msgid "Units" msgstr "단위" msgid "Home" msgstr "홈" msgid "Default page" msgstr "기본 페이지" msgid "Set the page opened on startup." msgstr "시작 시 열리는 페이지를 설정합니다." msgid "Enable dark Mode" msgstr "다크 모드 사용" msgid "Allow only one OrcaSlicer instance" msgstr "OrcaSlicer 인스턴스를 하나만 허용" msgid "On OSX there is always only one instance of app running by default. However it is allowed to run multiple instances of same app from the command line. In such case this settings will allow only one instance." msgstr "OSX에서는 기본적으로 항상 하나의 앱 인스턴스만 실행됩니다. 그러나 명령줄에서 동일한 앱의 여러 인스턴스를 실행할 수 있습니다. 그러한 경우 이 설정은 하나의 인스턴스만 허용합니다." msgid "If this is enabled, when starting OrcaSlicer and another instance of the same OrcaSlicer is already running, that instance will be reactivated instead." msgstr "이 기능을 활성화하면 OrcaSlicer를 시작하고 동일한 OrcaSlicer의 다른 인스턴스가 이미 실행 중일 때 해당 인스턴스가 대신 다시 활성화됩니다." msgid "Show splash screen" msgstr "시작 화면 표시" msgid "Show the splash screen during startup." msgstr "시작 화면을 표시합니다." # AI Translated msgid "Use window buttons on left side" msgstr "창 버튼을 왼쪽에 표시" # AI Translated msgid "(Requires restart)" msgstr "(다시 시작 필요)" # AI Translated msgid "Downloads folder" msgstr "다운로드 폴더" # AI Translated msgid "Target folder for downloaded items" msgstr "다운로드한 항목을 저장할 대상 폴더" msgid "Load All" msgstr "모두 로드" msgid "Ask When Relevant" msgstr "관련성 있는 경우 질문" msgid "Always Ask" msgstr "항상 물어보세요" msgid "Load Geometry Only" msgstr "형상만 로드" msgid "Load behaviour" msgstr "행동 로드" msgid "Should printer/filament/process settings be loaded when opening a 3MF file?" msgstr ".3mf를 열 때 프린터/필라멘트/프로세스 설정이 로드되어야 합니까?" msgid "Auto backup" msgstr "자동 백업" msgid "Backup your project periodically to help with restoring from an occasional crash." msgstr "간헐적인 충돌로부터 복원하기 위해 주기적으로 프로젝트를 백업하세요." # AI Translated msgid "Maximum recent files" msgstr "최근 파일 최대 개수" # AI Translated msgid "Maximum count of recent files" msgstr "최근 파일 목록에 표시할 최대 개수" # AI Translated msgid "Add STL/STEP files to recent files list" msgstr "STL/STEP 파일을 최근 파일 목록에 추가" msgid "Don't warn when loading 3MF with modified G-code" msgstr "수정된 Gcode로 3MF를 로드할 때 경고 없음" # AI Translated msgid "Show options when importing STEP file" msgstr "STEP 파일 가져오기 시 옵션 표시" # AI Translated msgid "If enabled, a parameter settings dialog will appear during STEP file import." msgstr "활성화하면 STEP 파일을 가져올 때 매개변수 설정 대화 상자가 표시됩니다." # AI Translated msgid "STEP importing: linear deflection" msgstr "STEP 가져오기: 선형 편차" # AI Translated msgid "" "Linear deflection used when meshing imported STEP files.\n" "Smaller values produce higher-quality meshes but increase processing time.\n" "Used as the default in the import dialog, or directly when the import dialog is disabled.\n" "Default: 0.003 mm." msgstr "" "가져온 STEP 파일을 메시로 변환할 때 사용하는 선형 편차입니다.\n" "값이 작을수록 메시 품질은 높아지지만 처리 시간이 늘어납니다.\n" "가져오기 대화 상자의 기본값으로 사용되며, 가져오기 대화 상자를 사용하지 않는 경우 직접 적용됩니다.\n" "기본값: 0.003 mm." # AI Translated msgid "STEP importing: angle deflection" msgstr "STEP 가져오기: 각도 편차" # AI Translated msgid "" "Angle deflection used when meshing imported STEP files.\n" "Smaller values produce higher-quality meshes but increase processing time.\n" "Used as the default in the import dialog, or directly when the import dialog is disabled.\n" "Default: 0.5." msgstr "" "가져온 STEP 파일을 메시로 변환할 때 사용하는 각도 편차입니다.\n" "값이 작을수록 메시 품질은 높아지지만 처리 시간이 늘어납니다.\n" "가져오기 대화 상자의 기본값으로 사용되며, 가져오기 대화 상자를 사용하지 않는 경우 직접 적용됩니다.\n" "기본값: 0.5." # AI Translated msgid "STEP importing: Split into multiple objects" msgstr "STEP 가져오기: 여러 객체로 분할" # AI Translated msgid "" "If enabled, compound and compsolid shapes in imported STEP files are split into multiple objects.\n" "Used as the default in the import dialog, or directly when the import dialog is disabled.\n" "Default: disabled." msgstr "" "활성화하면 가져온 STEP 파일의 복합(compound) 및 복합 솔리드(compsolid) 형상이 여러 객체로 분할됩니다.\n" "가져오기 대화 상자의 기본값으로 사용되며, 가져오기 대화 상자를 사용하지 않는 경우 직접 적용됩니다.\n" "기본값: 비활성화." # AI Translated msgid "Quality level for Draco export" msgstr "Draco 내보내기 품질 수준" msgid "bits" msgstr "bits" # AI Translated msgid "" "Controls the quantization bit depth used when compressing the mesh to Draco format.\n" "0 = lossless compression (geometry is preserved at full precision). Valid lossy values range from 8 to 30.\n" "Lower values produce smaller files but lose more geometric detail; higher values preserve more detail at the cost of larger files." msgstr "" "Draco 형식으로 메시를 압축할 때 사용하는 양자화 비트 심도를 제어합니다.\n" "0 = 무손실 압축(형상이 완전한 정밀도로 보존됨). 유효한 손실 압축 값의 범위는 8에서 30입니다.\n" "값이 낮을수록 파일은 작아지지만 형상 세부 정보가 더 많이 손실되고, 값이 높을수록 세부 정보는 더 많이 보존되지만 파일이 커집니다." # AI Translated msgid "Store full source file paths in projects" msgstr "프로젝트에 원본 파일의 전체 경로 저장" # AI Translated msgid "If enabled, saved projects store the absolute path to imported source files (STEP/STL/...), so \"Reload from disk\" still works when the source file is kept in a different folder than the project. If disabled, only the filename is stored, which keeps projects portable and avoids embedding absolute paths." msgstr "활성화하면 저장된 프로젝트에 가져온 원본 파일(STEP/STL/...)의 절대 경로가 저장되므로, 원본 파일이 프로젝트와 다른 폴더에 있어도 \"디스크에서 다시 불러오기\"가 계속 작동합니다. 비활성화하면 파일 이름만 저장되므로 프로젝트의 이식성이 유지되고 절대 경로가 포함되지 않습니다." msgid "Preset" msgstr "사전 설정" msgid "Remember printer configuration" msgstr "프린터 구성 기억" msgid "If enabled, Orca will remember and switch filament/process configuration for each printer automatically." msgstr "활성화하면 Orca는 각 프린터의 필라멘트/프로세스 구성을 자동으로 기억하고 전환합니다." # AI Translated msgid "Group user filament presets" msgstr "사용자 필라멘트 사전 설정 그룹화" # AI Translated msgid "Group user filament presets based on selection" msgstr "선택 항목을 기준으로 사용자 필라멘트 사전 설정을 그룹화합니다" # AI Translated msgid "By type" msgstr "유형별" # AI Translated msgid "By vendor" msgstr "제조사별" # AI Translated msgid "Optimize filaments area height for..." msgstr "필라멘트 영역 높이 최적화 대상..." # AI Translated msgid "filaments" msgstr "필라멘트" # AI Translated msgid "Optimizes filament area maximum height by chosen filament count." msgstr "선택한 필라멘트 개수에 맞게 필라멘트 영역의 최대 높이를 최적화합니다." # AI Translated msgid "Show shared profiles notification" msgstr "공유 프로필 알림 표시" # AI Translated msgid "Show a notification with a link to browse shared profiles when the selected printer is changed." msgstr "선택한 프린터가 변경되면 공유 프로필을 찾아볼 수 있는 링크가 포함된 알림을 표시합니다." # AI Translated msgid "Features" msgstr "기능" msgid "Multi device management" msgstr "다중 장치 관리" msgid "With this option enabled, you can send a task to multiple devices at the same time and manage multiple devices." msgstr "활성화하면 여러 장치에 동시에 작업을 보내고 여러 장치를 관리할 수 있습니다." msgid "Pop up to select filament grouping mode" msgstr "필라멘트 그룹화 모드를 선택하기 위한 팝업" # AI Translated msgid "Behaviour" msgstr "동작" # AI Translated msgid "Auto flush after changing..." msgstr "다음 변경 후 자동 플러시..." # AI Translated msgid "Auto calculate flushing volumes when selected values changed" msgstr "선택한 값이 변경되면 플러시 용량을 자동으로 계산합니다" msgid "Auto arrange plate after cloning" msgstr "복제 후 플레이트 자동 정렬" # AI Translated msgid "Auto slice after changes" msgstr "변경 후 자동 슬라이스" # AI Translated msgid "If enabled, OrcaSlicer will re-slice automatically whenever slicing-related settings change." msgstr "활성화하면 슬라이싱 관련 설정이 변경될 때마다 OrcaSlicer가 자동으로 다시 슬라이스합니다." # AI Translated msgid "Delay in seconds before auto slicing starts, allowing multiple edits to be grouped. Use 0 to slice immediately." msgstr "자동 슬라이싱이 시작되기까지의 지연 시간(초)으로, 여러 편집을 한꺼번에 처리할 수 있습니다. 0으로 설정하면 즉시 슬라이스합니다." # AI Translated msgid "Remove mixed temperature restriction" msgstr "혼합 온도 제한 해제" msgid "With this option enabled, you can print materials with a large temperature difference together." msgstr "이 옵션을 활성화하면 온도 차이가 큰 재료를 함께 출력할 수 있습니다." msgid "Touchpad" msgstr "터치패드" msgid "Camera style" msgstr "카메라 스타일" msgid "" "Select camera navigation style.\n" "Default: LMB+move for rotation, RMB/MMB+move for panning.\n" "Touchpad: Alt+move for rotation, Shift+move for panning." msgstr "" "카메라 탐색 스타일을 선택합니다.\n" "기본값: 회전의 경우 LMB+이동, 패닝의 경우 RMB/MMB+이동.\n" "터치패드: 회전하려면 Alt+이동, 패닝하려면 Shift+이동." # AI Translated msgid "Orbit speed multiplier" msgstr "궤도 회전 속도 배율" # AI Translated msgid "Multiplies the orbit speed for finer or coarser camera movement." msgstr "궤도 회전 속도에 배율을 적용하여 카메라 이동을 더 정밀하게 또는 더 크게 조절합니다." msgid "Zoom to mouse position" msgstr "마우스 위치로 확대" msgid "Zoom in towards the mouse pointer's position in the 3D view, rather than the 2D window center." msgstr "2D 윈도우 중앙이 아닌 3D 보기에서 마우스 포인터의 위치로 확대합니다." msgid "Use free camera" msgstr "자유로운 카메라 앵글 사용" msgid "If enabled, use free camera. If not enabled, use constrained camera." msgstr "활성화된 경우 자유로운 카메라 앵글을 사용합니다. 활성화되지 않은 경우 제한된 카메라 앵글을 사용합니다." msgid "Reverse mouse zoom" msgstr "역방향 마우스 줌" msgid "If enabled, reverses the direction of zoom with mouse wheel." msgstr "활성화되면 마우스 휠을 사용하여 확대/축소 방향을 반대로 바꿉니다." # AI Translated msgid "Pan" msgstr "화면 이동" # AI Translated msgid "Left Mouse Drag" msgstr "마우스 왼쪽 버튼 드래그" # AI Translated msgid "Set the action that dragging the left mouse button should perform." msgstr "마우스 왼쪽 버튼을 드래그할 때 수행할 동작을 설정합니다." # AI Translated msgid "Middle Mouse Drag" msgstr "마우스 가운데 버튼 드래그" # AI Translated msgid "Set the action that dragging the middle mouse button should perform." msgstr "마우스 가운데 버튼을 드래그할 때 수행할 동작을 설정합니다." # AI Translated msgid "Right Mouse Drag" msgstr "마우스 오른쪽 버튼 드래그" # AI Translated msgid "Set the action that dragging the right mouse button should perform." msgstr "마우스 오른쪽 버튼을 드래그할 때 수행할 동작을 설정합니다." # AI Translated msgid "Clear my choice on..." msgstr "다음 항목에 대한 선택 지우기..." # AI Translated msgid "Unsaved projects" msgstr "저장되지 않은 프로젝트" msgid "Clear my choice on the unsaved projects." msgstr "저장되지 않은 프로젝트에서 내 선택을 지웁니다." # AI Translated msgid "Unsaved presets" msgstr "저장되지 않은 사전 설정" msgid "Clear my choice on the unsaved presets." msgstr "저장되지 않은 사전 설정에서 선택을 취소합니다." # AI Translated msgid "Synchronizing printer preset" msgstr "프린터 사전 설정 동기화" msgid "Clear my choice for synchronizing printer preset after loading the file." msgstr "파일을 로드한 후 프린터 사전 설정 동기화를 선택 취소합니다." # AI Translated msgid "Graphics" msgstr "그래픽" # AI Translated msgid "Smooth normals" msgstr "부드러운 법선" # AI Translated msgid "" "Applies smooth normals to the model.\n" "\n" "Requires manual scene reload to take effect (right-click on 3D view → \"Reload All\")." msgstr "" "모델에 부드러운 법선을 적용합니다.\n" "\n" "적용하려면 장면을 수동으로 다시 로드해야 합니다(3D 보기에서 마우스 오른쪽 버튼 클릭 → \"모두 다시 불러오기\")." # AI Translated msgid "Phong shading" msgstr "퐁 셰이딩" # AI Translated msgid "Uses Phong shading inside realistic view." msgstr "사실적 보기에서 퐁 셰이딩을 사용합니다." # AI Translated msgid "SSAO ambient occlusion" msgstr "SSAO 앰비언트 오클루전" # AI Translated msgid "Applies SSAO in realistic view." msgstr "사실적 보기에서 SSAO를 적용합니다." # AI Translated msgid "Shadows" msgstr "그림자" # AI Translated msgid "Renders cast shadows on the plate, other objects, and each object onto itself in realistic view." msgstr "사실적 보기에서 플레이트, 다른 객체, 그리고 객체 자체에 드리워지는 그림자를 렌더링합니다." msgid "Anti-aliasing" msgstr "Anti-aliasing" # AI Translated msgid "MSAA Multiplier" msgstr "MSAA 배율" # AI Translated msgid "" "Set the Multi-Sample Anti-Aliasing level.\n" "Higher values result in smoother edges, but the impact on performance is exponential.\n" "Lower values improve performance, at the cost of jagged edges.\n" "If disabled, its recommended to enable FXAA to reduce jagged edges with minimal performance impact.\n" "\n" "Requires application restart." msgstr "" "다중 샘플 안티앨리어싱(MSAA) 수준을 설정합니다.\n" "값이 높을수록 가장자리가 부드러워지지만 성능에 미치는 영향은 기하급수적으로 커집니다.\n" "값이 낮을수록 성능은 좋아지지만 가장자리가 거칠어집니다.\n" "비활성화한 경우에는 FXAA를 활성화하여 최소한의 성능 저하로 계단 현상을 줄이는 것이 좋습니다.\n" "\n" "애플리케이션을 다시 시작해야 적용됩니다." msgid "Disabled" msgstr "비활성" # AI Translated msgid "FXAA post-processing" msgstr "FXAA 후처리" # AI Translated msgid "" "Applies Fast Approximate Anti-Aliasing as a screen-space pass.\n" "Useful for disabling or reducing the MSAA setting to improve performance.\n" "\n" "Takes effect immediately." msgstr "" "고속 근사 안티앨리어싱(FXAA)을 화면 공간 패스로 적용합니다.\n" "성능을 개선하기 위해 MSAA 설정을 낮추거나 비활성화할 때 유용합니다.\n" "\n" "즉시 적용됩니다." msgid "FPS" msgstr "FPS" # AI Translated msgid "FPS cap" msgstr "FPS 상한" # AI Translated msgid "(0 = unlimited)" msgstr "(0 = 무제한)" # AI Translated msgid "" "Limits viewport frame rate to reduce GPU load and power usage.\n" "Set to 0 for unlimited frame rate." msgstr "" "뷰포트의 프레임 속도를 제한하여 GPU 부하와 전력 사용량을 줄입니다.\n" "0으로 설정하면 프레임 속도가 무제한이 됩니다." # AI Translated msgid "Show FPS overlay" msgstr "FPS 오버레이 표시" # AI Translated msgid "Displays current viewport FPS in the top-right corner." msgstr "현재 뷰포트의 FPS를 오른쪽 위 모서리에 표시합니다." # AI Translated msgid "G-code Preview" msgstr "G-code 미리보기" # AI Translated msgid "Dim lower layers" msgstr "아래 레이어 어둡게 표시" # AI Translated msgid "When scrubbing the layer slider in the sliced preview, render the layers below the current one darkened so that only the layer being viewed is shown at full brightness." msgstr "슬라이스된 미리보기에서 레이어 슬라이더를 움직일 때 현재 레이어보다 아래에 있는 레이어를 어둡게 렌더링하여, 보고 있는 레이어만 완전한 밝기로 표시합니다." # AI Translated msgid "Dimmed layer brightness" msgstr "어둡게 표시된 레이어의 밝기" msgid "%" msgstr "%" # AI Translated msgid "" "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n" "99% is barely darkened, 0% renders them black. Capped at 99% because 100% would be the same as disabling the option." msgstr "" "\"아래 레이어 어둡게 표시\"를 활성화했을 때 어둡게 표시되는 레이어의 밝기입니다.\n" "99%는 거의 어두워지지 않고, 0%는 완전히 검게 표시됩니다. 100%는 이 옵션을 비활성화한 것과 같으므로 최대 99%로 제한됩니다." msgid "Login region" msgstr "로그인 지역" msgid "Stealth mode" msgstr "스텔스 모드" # AI Translated msgid "" "This disables all cloud features, including Orca Cloud profile syncing. Users who prefer to work entirely offline can enable this option.\n" "Note: When Stealth Mode is enabled, your user profiles will not be backed up to Orca Cloud." msgstr "" "이 옵션은 Orca Cloud 프로필 동기화를 포함한 모든 클라우드 기능을 비활성화합니다. 완전히 오프라인으로 작업하려는 사용자는 이 옵션을 활성화할 수 있습니다.\n" "참고: 스텔스 모드를 활성화하면 사용자 프로필이 Orca Cloud에 백업되지 않습니다." # AI Translated msgid "Hide login side panel" msgstr "로그인 사이드 패널 숨기기" # AI Translated msgid "Hide the login side panel on the home page." msgstr "홈 화면의 로그인 사이드 패널을 숨깁니다." msgid "Network test" msgstr "네트워크 테스트" msgid "Test" msgstr "테스트" # AI Translated msgid "Cloud Providers" msgstr "클라우드 제공업체" # AI Translated msgid "Enable Bambu Cloud" msgstr "Bambu Cloud 활성화" # AI Translated msgid "Allow logging into Bambu Cloud alongside Orca Cloud. When enabled, a Bambu login section appears on the homepage." msgstr "Orca Cloud와 함께 Bambu Cloud에도 로그인할 수 있도록 허용합니다. 활성화하면 홈 화면에 Bambu 로그인 영역이 표시됩니다." # AI Translated msgid "Update & sync" msgstr "업데이트 및 동기화" msgid "Check for stable updates only" msgstr "안정적인 업데이트만 확인" msgid "Auto sync user presets (Printer/Filament/Process)" msgstr "사용자 사전 설정 자동 동기화(프린터/필라멘트/프로세스)" # AI Translated msgid "Filament sync mode" msgstr "필라멘트 동기화 모드" # AI Translated msgid "Choose whether sync updates both filament preset and color, or only color." msgstr "동기화 시 필라멘트 사전 설정과 색상을 모두 업데이트할지, 색상만 업데이트할지 선택합니다." # AI Translated msgid "Filament & Color" msgstr "필라멘트 및 색상" # AI Translated msgid "Color only" msgstr "색상만" msgid "Update built-in presets automatically." msgstr "기본 제공 사전 설정을 자동으로 업데이트합니다." # AI Translated msgid "Use encrypted file for token storage" msgstr "토큰 저장에 암호화된 파일 사용" # AI Translated msgid "Store authentication tokens in an encrypted file instead of the system keychain. (Requires restart)" msgstr "시스템 키체인 대신 암호화된 파일에 인증 토큰을 저장합니다. (다시 시작 필요)" # AI Translated msgid "Bambu network plug-in" msgstr "Bambu 네트워크 플러그인" # AI Translated msgid "Enable Bambu network plug-in" msgstr "Bambu 네트워크 플러그인 활성화" # AI Translated msgid "Network plug-in version" msgstr "네트워크 플러그인 버전" # AI Translated msgid "Select the network plug-in version to use" msgstr "사용할 네트워크 플러그인 버전을 선택합니다" msgid "Associate files to OrcaSlicer" msgstr "파일을 OrcaSlicer에 연결" # AI Translated msgid "File associations for the Microsoft Store version are managed by Windows Settings." msgstr "Microsoft Store 버전의 파일 연결은 Windows 설정에서 관리합니다." # AI Translated msgid "Open Windows Default Apps Settings" msgstr "Windows 기본 앱 설정 열기" msgid "Associate 3MF files to OrcaSlicer" msgstr ".3mf 파일을 OrcaSlicer에 연결" msgid "If enabled, this sets OrcaSlicer as the default application to open 3MF files." msgstr "활성화된 경우 OrcaSlicer를 기본 응용 프로그램으로 설정하여 .3mf 파일을 엽니다" # AI Translated msgid "Associate DRC files to OrcaSlicer" msgstr "DRC 파일을 OrcaSlicer에 연결" # AI Translated msgid "If enabled, sets OrcaSlicer as default application to open DRC files." msgstr "활성화하면 DRC 파일을 여는 기본 애플리케이션으로 OrcaSlicer가 설정됩니다." msgid "Associate STL files to OrcaSlicer" msgstr ".stl 파일을 OrcaSlicer에 연결" msgid "If enabled, this sets OrcaSlicer as the default application to open STL files." msgstr "활성화된 경우 OrcaSlicer를 기본 응용 프로그램으로 설정하여 .stl 파일을 엽니다" msgid "Associate STEP files to OrcaSlicer" msgstr ".step/.stp 파일을 OrcaSlicer에 연결" msgid "If enabled, this sets OrcaSlicer as the default application to open STEP files." msgstr "활성화된 경우 OrcaSlicer를 기본 응용 프로그램으로 설정하여 .step 파일을 엽니다" msgid "Associate web links to OrcaSlicer" msgstr "OrcaSlicer에 웹 링크 연결" # AI Translated msgid "Developer" msgstr "개발자" msgid "Skip AMS blacklist check" msgstr "AMS 블랙리스트 확인 건너뛰기" # AI Translated msgid "Show unsupported presets" msgstr "지원되지 않는 사전 설정 표시" # AI Translated msgid "Show incompatible/unsupported presets in the printer and filament dropdown lists. These presets cannot be selected." msgstr "프린터 및 필라멘트 드롭다운 목록에 호환되지 않거나 지원되지 않는 사전 설정을 표시합니다. 이러한 사전 설정은 선택할 수 없습니다." # AI Translated msgid "Experimental Features" msgstr "실험적 기능" # AI Translated msgid "Keep painted feature after mesh change" msgstr "메시 변경 후 칠한 기능 유지" # AI Translated msgid "" "Attempt to keep painted features (color/seam/support/fuzzy etc.) after changing the object mesh (such as cut/reload from disk/simplify/fix etc.)\n" "Highly experimental! Slow and may create artifact." msgstr "" "객체 메시를 변경한 후(자르기/디스크에서 다시 불러오기/단순화/수정 등)에도 칠한 기능(색상/재봉선/서포트/퍼지 등)을 유지하려고 시도합니다.\n" "매우 실험적인 기능입니다! 속도가 느리고 아티팩트가 생길 수 있습니다." # AI Translated msgid "Allow Abnormal Storage" msgstr "비정상 저장 장치 허용" # AI Translated msgid "" "This allows the use of Storage that is marked as abnormal by the Printer.\n" "Use at your own risk, can cause issues!" msgstr "" "프린터가 비정상으로 표시한 저장 장치를 사용할 수 있게 합니다.\n" "문제가 발생할 수 있으므로 사용자 책임하에 사용하십시오!" msgid "Log Level" msgstr "로그 수준" msgid "fatal" msgstr "치명적" msgid "error" msgstr "오류" msgid "warning" msgstr "경고" msgid "debug" msgstr "디버그" msgid "trace" msgstr "추적" # AI Translated msgid "Debug" msgstr "디버그" msgid "Sync settings" msgstr "동기화 설정" msgid "User sync" msgstr "사용자 동기화" msgid "Preset sync" msgstr "사전 설정 동기화" msgid "Preferences sync" msgstr "기본 설정 동기화" msgid "Enable SSL(MQTT)" msgstr "SSL(MQTT) 활성화" msgid "Enable SSL(FTP)" msgstr "SSL(FTP) 활성화" msgid "Internal developer mode" msgstr "내부 개발자 모드" msgid "Host Setting" msgstr "호스트 설정" msgid "DEV host: api-dev.bambu-lab.com/v1" msgstr "DEV host: api-dev.bambu-lab.com/v1" msgid "QA host: api-qa.bambu-lab.com/v1" msgstr "QA host: api-qa.bambu-lab.com/v1" msgid "PRE host: api-pre.bambu-lab.com/v1" msgstr "PRE host: api-pre.bambu-lab.com/v1" msgid "Product host" msgstr "제품 호스트" msgid "Debug save button" msgstr "디버그 저장 버튼" msgid "Save debug settings" msgstr "디버그 설정 저장" msgid "Debug settings have been saved successfully!" msgstr "디버그 설정이 성공적으로 저장되었습니다!" msgid "Cloud environment switched; please login again!" msgstr "클라우드 환경 전환, 다시 로그인해주세요!" msgid "System presets" msgstr "시스템 사전 설정" msgid "User presets" msgstr "사용자 사전 설정" msgid "Incompatible presets" msgstr "호환되지 않는 사전 설정" msgid "My Printer" msgstr "내 프린터" # AI Translated msgid "AMS filaments" msgstr "AMS 필라멘트" msgid "Left filaments" msgstr "왼쪽 필라멘트" msgid "AMS filament" msgstr "AMS 필라멘트" msgid "Right filaments" msgstr "오른쪽 필라멘트" msgid "Click to select filament color" msgstr "필라멘트 색상 선택" msgid "Add/Remove presets" msgstr "사전 설정 추가/제거" msgid "Edit preset" msgstr "사전 설정 편집" # AI Translated msgid "Change extruder color" msgstr "압출기 색상 변경" # AI Translated msgid "Unspecified" msgstr "지정되지 않음" msgid "Project-inside presets" msgstr "프로젝트 내부 사전 설정" # AI Translated msgid "Bundle presets" msgstr "번들 사전 설정" msgid "System" msgstr "시스템" msgid "Unsupported presets" msgstr "지원되지 않는 사전 설정" msgid "Unsupported" msgstr "지원되지 않음" msgid "Add/Remove filament" msgstr "필라멘트 추가/제거" msgid "Add/Remove materials" msgstr "재료 추가/제거" msgid "Select/Remove printers (system presets)" msgstr "프린터 선택/제거(시스템 사전 설정)" msgid "Create printer" msgstr "프린터 생성" msgid "Incompatible" msgstr "호환되지 않음" msgid "The selected preset is null!" msgstr "선택한 사전 설정의 값이 존재하지 않습니다!" # AI Translated msgctxt "Layer range" msgid "End" msgstr "끝" msgid "Customize" msgstr "사용자 정의" msgid "Other layer filament sequence" msgstr "다른 층 필라멘트 순서" msgid "Please input layer value (>= 2)." msgstr "레이어 값(>= 2)을 입력하세요." msgid "Plate name" msgstr "플레이트 이름" msgid "Same as Global Plate Type" msgstr "글로벌 플레이트 타입과 동일" msgid "Bed type" msgstr "베드 유형" msgid "Same as Global Print Sequence" msgstr "전역 출력 순서와 동일" msgid "Print sequence" msgstr "출력 순서" msgid "Same as Global" msgstr "글로벌과 동일" msgid "Disable" msgstr "비활성" msgid "Spiral vase" msgstr "나선형 꽃병 모드" msgid "First layer filament sequence" msgstr "첫 번째 레이어 필라멘트 순서" msgid "By Layer" msgstr "레이어별" msgid "By Object" msgstr "객체별" msgid "Accept" msgstr "수락" msgid "Log Out" msgstr "로그 아웃" msgid "Slice all plates to obtain time and filament estimation" msgstr "시간 및 필라멘트 추정치를 얻기 위해 모든 플레이트를 슬라이스합니다" msgid "Packing project data into 3MF file" msgstr "프로젝트 데이터를 3MF 파일로 압축" msgid "Uploading 3MF" msgstr "3mf 업로드 중" msgid "Jump to model publish web page" msgstr "모델 게시 웹 페이지로 이동" msgid "Note: The preparation may take several minutes. Please be patient." msgstr "참고: 준비하는 데 몇 분 정도 걸릴 수 있습니다. 조금만 기다려 주십시오." msgid "Publish" msgstr "게시" msgid "Publish was canceled" msgstr "게시가 취소되었습니다" msgid "Slicing Plate 1" msgstr "플레이트 1 슬라이싱" msgid "Packing data to 3MF" msgstr "데이터를 3mf로 압축 중" # AI Translated msgid "Uploading data" msgstr "데이터 업로드 중" msgid "Jump to webpage" msgstr "웹 페이지로 이동" #, c-format, boost-format msgid "Save %s as" msgstr "%s을(를) 다음으로 저장" msgid "User Preset" msgstr "사용자 사전 설정" msgid "Preset Inside Project" msgstr "프로젝트 내부 사전 설정" # AI Translated msgid "Detach from parent" msgstr "상위 항목에서 분리" msgid "Name is unavailable." msgstr "이름을 사용할 수 없습니다." msgid "Overwriting a system profile is not allowed." msgstr "시스템 사전 설정은 덮어쓸 수 없습니다" #, boost-format msgid "Preset \"%1%\" already exists." msgstr "%1% 사전 설정이 이미 있습니다." #, boost-format msgid "Preset \"%1%\" already exists and is incompatible with the current printer." msgstr "%1% 사전 설정이 이미 있으며 현재 프린터와 호환되지 않습니다." msgid "Please note that saving will overwrite the current preset." msgstr "저장 작업이 이 사전 설정을 대체합니다" msgid "The name cannot be the same as a preset alias name." msgstr "이름은 사전 설정의 별칭 이름과 같을 수 없습니다." msgid "Save preset" msgstr "사전 설정 저장" msgctxt "PresetName" msgid "Copy" msgstr "복사" #, boost-format msgid "Printer \"%1%\" is selected with preset \"%2%\"" msgstr "%1% 프린터가 \"%2%\" 사전 설정으로 선택되었습니다" #, boost-format msgid "Please choose an action with \"%1%\" preset after saving." msgstr "저장 후 사전 설정 \"%1%\" 으로 작업을 선택하세요." #, boost-format msgid "For \"%1%\", change \"%2%\" to \"%3%\" " msgstr "\"%1%\"에 대해 \"%2%\"를 \"%3%\"로 변경 " #, boost-format msgid "For \"%1%\", add \"%2%\" as a new preset" msgstr "%1%에 대해, %2%를 새 사전 설정으로 추가합니다" #, boost-format msgid "Simply switch to \"%1%\"" msgstr "\"%1%\"로 단순 전환" msgid "Task canceled" msgstr "작업이 취소됨" msgid "Bambu Cool Plate" msgstr "뱀부 쿨 플레이트" msgid "PLA Plate" msgstr "PLA 플레이트" msgid "Bambu Engineering Plate" msgstr "뱀부 엔지니어링 플레이트" msgid "Bambu Smooth PEI Plate" msgstr "뱀부 부드러운 PEI 플레이트" msgid "High temperature Plate" msgstr "고온 플레이트" msgid "Bambu Textured PEI Plate" msgstr "뱀부 텍스처 PEI 플레이트" msgid "Bambu Cool Plate SuperTack" msgstr "Bambu 쿨 플레이트 슈퍼택" msgid "Send print job" msgstr "출력 작업 보내기" msgid "Not satisfied with the grouping of filaments? Regroup and slice ->" msgstr "필라멘트 그룹화가 만족스럽지 않으신가요? 재그룹화 및 슬라이스 ->" msgid "Manually change external spool during printing for multi-color printing" msgstr "멀티 컬러 출력을 위해 출력 중 외부 스풀을 수동으로 변경합니다." msgid "Multi-color with external" msgstr "외부 멀티 컬러" msgid "Your filament grouping method in the sliced file is not optimal." msgstr "슬라이스된 파일의 필라멘트 그룹화 방법이 최적이 아닙니다." # AI Translated msgid "To ensure print quality, the drying temperature will be lowered during printing." msgstr "출력 품질을 보장하기 위해 출력 중에는 건조 온도가 낮아집니다." # AI Translated msgid "Select timelapse storage location" msgstr "타임랩스 저장 위치 선택" msgid "Auto Bed Leveling" msgstr "자동 베드 레벨링" msgid "" "This checks the flatness of heatbed. Leveling makes extruded height uniform.\n" "*Automatic mode: Run a leveling check(about 10 seconds). Skip if surface is fine." msgstr "" "열판의 평탄도를 확인합니다. 수평을 맞추면 압출 높이가 균일해집니다.\n" "*자동 모드: 레벨링 검사를 실행합니다(약 10초). 표면이 평탄하면 건너뜁니다." msgid "Flow Dynamics Calibration" msgstr "동적 압출량 교정" msgid "" "This process determines the dynamic flow values to improve overall print quality.\n" "*Automatic mode: Skip if the filament was calibrated recently." msgstr "" "이 프로세스는 전반적인 출력 품질을 개선하기 위해 동적 흐름 값을 결정합니다.\n" "*자동 모드: 필라멘트가 최근에 보정된 경우 건너뜁니다." msgid "Nozzle Offset Calibration" msgstr "노즐 오프셋 정 실패." msgid "" "Calibrate nozzle offsets to enhance print quality.\n" "*Automatic mode: Check for calibration before printing. Skip if unnecessary." msgstr "" "노즐 오프셋을 보정하여 출력 품질을 향상시킵니다.\n" "*자동 모드: 출력하기 전에 보정 여부를 확인합니다. 불필요한 경우 건너뜁니다." # AI Translated msgid "Shared PA Profile" msgstr "공유 PA 프로필" # AI Translated msgid "Nozzles and filaments of the same type share the same PA profile." msgstr "같은 유형의 노즐과 필라멘트는 동일한 PA 프로필을 공유합니다." msgid "Send complete" msgstr "전송 완료" msgid "Error code" msgstr "오류 코드" msgid "Error desc" msgstr "오류 설명" msgid "Extra info" msgstr "추가 정보" # AI Translated msgid "The Filament Track Switch installed on the printer does not match the slicing file. Please re-slice to avoid print quality issues." msgstr "프린터에 설치된 Filament Track Switch가 슬라이싱 파일과 일치하지 않습니다. 출력 품질 문제를 방지하려면 다시 슬라이스하십시오." # AI Translated msgid "This print requires a Filament Track Switch. Please install it first." msgstr "이 출력에는 Filament Track Switch가 필요합니다. 먼저 설치하십시오." # AI Translated msgid "The Filament Track Switch has not been setup. Please setup it first." msgstr "Filament Track Switch가 설정되지 않았습니다. 먼저 설정하십시오." # AI Translated #, c-format, boost-format msgid "Failed to send nozzle auto-mapping request to printer { code: %d }. Please try to refresh the printer information. If it still does not recover, you can try to rebind the printer and check the network connection." msgstr "프린터에 노즐 자동 매핑 요청을 보내지 못했습니다 { code: %d }. 프린터 정보를 새로 고쳐 보십시오. 그래도 복구되지 않으면 프린터를 다시 바인딩하고 네트워크 연결을 확인해 보십시오." # AI Translated msgid "The printer is calculating nozzle mapping." msgstr "프린터가 노즐 매핑을 계산하고 있습니다." # AI Translated msgid "Please wait a moment..." msgstr "잠시 기다려 주십시오..." # AI Translated #, c-format, boost-format msgid "Failed to receive nozzle auto-mapping table from printer { msg: %s }. Please refresh the printer information." msgstr "프린터에서 노즐 자동 매핑 표를 받지 못했습니다 { msg: %s }. 프린터 정보를 새로 고치십시오." # AI Translated #, c-format, boost-format msgid "The printer failed to build the nozzle auto-mapping table { code: %d }. Please refresh nozzle information." msgstr "프린터가 노즐 자동 매핑 표를 생성하지 못했습니다 { code: %d }. 노즐 정보를 새로 고치십시오." # AI Translated #, c-format, boost-format msgid "The current nozzle mapping may produce an extra %0.2f g of waste." msgstr "현재 노즐 매핑에서는 %0.2f g의 폐기물이 추가로 발생할 수 있습니다." # AI Translated #, c-format, boost-format msgid "Recommended filament arrangement saves %s->" msgstr "권장 필라멘트 배치로 %s만큼 절약됩니다->" #, c-format, boost-format msgid "Filament %s does not match the filament in AMS slot %s. Please update the printer firmware to support AMS slot assignment." msgstr "필라멘트 %s가 AMS 슬롯 %s의 필라멘트와 일치하지 않습니다. AMS 슬롯 할당을 지원하려면 프린터 펌웨어를 업데이트하세요." msgid "Filament does not match the filament in AMS slot. Please update the printer firmware to support AMS slot assignment." msgstr "필라멘트가 AMS 슬롯의 필라멘트와 일치하지 않습니다. AMS 슬롯 할당을 지원하려면 프린터 펌웨어를 업데이트하세요." #, c-format, boost-format msgid "The selected printer (%s) is incompatible with the print file configuration (%s). Please adjust the printer preset in the prepare page or choose a compatible printer on this page." msgstr "선택한 프린터(%s)가 출력 파일 구성(%s)과 호환되지 않습니다. 준비 페이지에서 프린터 사전 설정을 조정하거나 이 페이지에서 호환되는 프린터를 선택하세요." msgid "When spiral vase mode is enabled, machines with I3 structure will not generate timelapse videos." msgstr "나선형 꽃병 모드를 활성화하면 I3 구조의 장치는 타임랩스 비디오를 생성하지 않습니다." msgid "The current printer does not support timelapse in Traditional Mode when printing By-Object." msgstr "현재 프린터는 개체별 출력 시 기존 모드에서 타임랩스를 지원하지 않습니다." # AI Translated msgid "I have checked the installed nozzle and want to print anyway." msgstr "설치된 노즐을 확인했으며 그래도 출력하겠습니다." msgid "Errors" msgstr "오류" msgid "More than one filament types have been mapped to the same external spool, which may cause printing issues. The printer won't pause during printing." msgstr "두 개 이상의 필라멘트 유형이 동일한 외부 스풀에 매핑되어 출력 문제가 발생할 수 있습니다. 출력중에 프린터가 일시 중지되지 않습니다." msgid "The filament type setting of external spool is different from the filament in the slicing file." msgstr "" "외부 스풀의 필라멘트 유형 설정이 슬라이싱 파일의 필라멘트와 다릅니다, \n" "출력 문제가 발생할 수 있습니다. " msgid "The printer type selected when generating G-code is not consistent with the currently selected printer. It is recommended that you use the same printer type for slicing." msgstr "Gcode를 생성할 때 선택한 프린터 유형이 현재 선택한 프린터와 일치하지 않습니다. 슬라이싱에 동일한 프린터 유형을 사용하는 것이 좋습니다." msgid "There are some unknown filaments in the AMS mappings. Please check whether they are the required filaments. If they are okay, click \"Confirm\" to start printing." msgstr "AMS 매핑에 알 수 없는 필라멘트가 있습니다. 필요한 필라멘트인지 확인해주세요. 정상이면 \"확인\"을 눌러 출력을 시작하세요." msgid "Please check the following:" msgstr "다음을 확인하세요:" msgid "Please fix the error above, otherwise printing cannot continue." msgstr "위의 오류를 수정하십시오. 그렇지 않으면 출력를 계속할 수 없습니다." msgid "Please click the confirm button if you still want to proceed with printing." msgstr "그래도 출력을 계속하려면 확인 버튼을 클릭하세요." msgid "This checks the flatness of heatbed. Leveling makes extruded height uniform." msgstr "히트 베드의 평탄도를 확인합니다. 수평을 맞추면 압출 높이가 균일해집니다." msgid "This process determines the dynamic flow values to improve overall print quality." msgstr "이 프로세스는 동적 흐름 값을 결정하여 전체 인쇄 품질을 개선합니다." msgid "Internal" msgstr "내부" # AI Translated #, c-format, boost-format msgid "%s space less than 20MB. Timelapse may not save properly. You can turn it off or" msgstr "%s 공간이 20MB 미만입니다. 타임랩스가 제대로 저장되지 않을 수 있습니다. 타임랩스를 끄거나" # AI Translated msgid "Clean up files" msgstr "파일 정리" # AI Translated msgid "Low internal storage. This timelapse will overwrite the oldest video files." msgstr "내부 저장 공간이 부족합니다. 이 타임랩스는 가장 오래된 동영상 파일을 덮어씁니다." # AI Translated msgid "Low external storage. This timelapse will overwrite the oldest video files." msgstr "외부 저장 공간이 부족합니다. 이 타임랩스는 가장 오래된 동영상 파일을 덮어씁니다." # AI Translated msgid "Insufficient external storage for time-lapse photography. Connect to computer to delete files, or use a larger memory card." msgstr "타임랩스 촬영을 위한 외부 저장 공간이 부족합니다. 컴퓨터에 연결하여 파일을 삭제하거나 용량이 더 큰 메모리 카드를 사용하십시오." # AI Translated msgid "Storage Space Not Enough" msgstr "저장 공간 부족" # AI Translated msgid "Confirm & Print" msgstr "확인 후 출력" # AI Translated msgid "Cancel Timelapse & Print" msgstr "타임랩스 취소 후 출력" # AI Translated msgid "Clean Up" msgstr "정리" msgid "Preparing print job" msgstr "출력 작업 준비 중" msgid "The name length exceeds the limit." msgstr "이름 길이가 제한을 초과합니다." #, c-format, boost-format msgid "Cost %dg filament and %d changes more than optimal grouping." msgstr "비용 %dg 필라멘트 및 %d 최적의 그룹화보다 더 많이 변경됩니다." msgid "nozzle" msgstr "노즐" # AI Translated #, c-format, boost-format msgid "Refreshing information of hotends(%d/%d)." msgstr "핫엔드 정보를 새로 고치는 중(%d/%d)." # AI Translated msgid "There are not enough available hotends currently." msgstr "현재 사용 가능한 핫엔드가 충분하지 않습니다." # AI Translated msgid "Please complete the hotend rack setup and try again." msgstr "핫엔드 랙 설정을 완료한 후 다시 시도하십시오." # AI Translated msgid "Please refresh the nozzle information and try again." msgstr "노즐 정보를 새로 고친 후 다시 시도하십시오." # AI Translated msgid "Please re-slice to avoid filament waste." msgstr "필라멘트 낭비를 방지하려면 다시 슬라이스하십시오." # AI Translated msgid "The reported hotend information may be unreliable." msgstr "보고된 핫엔드 정보가 정확하지 않을 수 있습니다." # AI Translated #, c-format, boost-format msgid "The printer has no nozzle matching the slicing file (%s)." msgstr "프린터에 슬라이싱 파일(%s)과 일치하는 노즐이 없습니다." # AI Translated msgid "Please install a matching nozzle in the hotend rack, or set the corresponding printer preset while slicing." msgstr "핫엔드 랙에 일치하는 노즐을 설치하거나, 슬라이싱할 때 해당 프린터 사전 설정을 지정하십시오." # AI Translated msgid "The toolhead and hotend rack are full. Please remove at least one hotend before printing." msgstr "툴헤드와 핫엔드 랙이 가득 찼습니다. 출력하기 전에 핫엔드를 하나 이상 제거하십시오." #, c-format, boost-format msgid "The nozzle flow setting of %s(%s) doesn't match with the slicing file(%s). Please make sure the nozzle installed matches with settings in printer, then set the corresponding printer preset while slicing." msgstr "%s(%s)의 노즐 유량 설정이 슬라이싱 파일(%s)과 일치하지 않습니다. 설치된 노즐이 프린터의 설정과 일치하는지 확인한 다음 슬라이싱하는 동안 해당 프린터 프리셋을 설정하세요." msgid "Tips: If you changed your nozzle of your printer lately, please go to 'Device -> Printer parts' to change your nozzle setting." msgstr "팁: 최근에 프린터의 노즐을 변경한 경우 '장치 -> 프린터 부품'으로 이동하여 노즐 설정을 변경하세요." #, c-format, boost-format msgid "The %s diameter(%.1fmm) of current printer doesn't match with the slicing file (%.1fmm). Please make sure the nozzle installed matches with settings in printer, then set the corresponding printer preset when slicing." msgstr "현재 프린터의 %s 직경(%.1fmm)이 슬라이싱 파일(%.1fmm)과 일치하지 않습니다. 설치된 노즐이 프린터의 설정과 일치하는지 확인한 다음 슬라이싱할 때 해당 프린터 프리셋을 설정하세요." #, c-format, boost-format msgid "The current nozzle diameter (%.1fmm) doesn't match with the slicing file (%.1fmm). Please make sure the nozzle installed matches with settings in printer, then set the corresponding printer preset when slicing." msgstr "현재 노즐 직경(%.1fmm)이 슬라이싱 파일(%.1fmm)과 일치하지 않습니다. 설치된 노즐이 프린터의 설정과 일치하는지 확인한 다음 슬라이싱할 때 해당 프린터 프리셋을 설정하세요." msgid "both extruders" msgstr "두 압출기" #, c-format, boost-format msgid "The hardness of current material (%s) exceeds the hardness of %s(%s). Please verify the nozzle or material settings and try again." msgstr "현재 재료의 경도 (%s) 가 경도 %s (%s) 를 초과합니다. 노즐 또는 재료 설정을 확인하고 다시 시도하십시오." # AI Translated msgid "Your current firmware version cannot start this print job. Please update to the latest version and try again." msgstr "현재 펌웨어 버전으로는 이 출력 작업을 시작할 수 없습니다. 최신 버전으로 업데이트한 후 다시 시도하십시오." # AI Translated #, c-format, boost-format msgid "The hardness of current material (%s) exceeds the hardness of %s(%s). It may cause nozzle wear, leading to material leakage and unstable flow. Please exercise caution when using it." msgstr "현재 재료(%s)의 경도가 %s(%s)의 경도를 초과합니다. 노즐 마모가 발생하여 재료 누출과 불안정한 압출량으로 이어질 수 있습니다. 사용 시 주의하십시오." # AI Translated msgid "Some filaments may switch between extruders during printing. Manual K-value calibration cannot be applied throughout the entire print, which may affect print quality. Enabling Flow Dynamics Calibration is recommended." msgstr "일부 필라멘트는 출력 중에 압출기 사이를 오갈 수 있습니다. 수동 K값 교정은 출력 전체에 적용할 수 없어 출력 품질에 영향을 줄 수 있습니다. 동적 압출량 교정을 활성화하는 것이 좋습니다." # AI Translated msgid "There is stringing-prone filament in this file. For best print quality, we recommend switching nozzle clumping detection to Auto mode." msgstr "이 파일에는 실 늘어짐이 발생하기 쉬운 필라멘트가 있습니다. 최상의 출력 품질을 위해 노즐 뭉침 감지를 자동 모드로 전환하는 것이 좋습니다." # AI Translated msgid "If 'Dynamic Flow Calibration' is set to Auto/On, the system will use the manual calibration value or the default value and skip the flow calibration process. You can perform a manual flow calibration for TPU filament on the 'Calibration' page." msgstr "'동적 압출량 교정'이 자동/켬으로 설정되어 있으면 시스템이 수동 교정값 또는 기본값을 사용하고 압출량 교정 과정을 건너뜁니다. TPU 필라멘트의 수동 압출량 교정은 '교정' 페이지에서 수행할 수 있습니다." # AI Translated #, c-format, boost-format msgid "[ %s ] requires printing in a high-temperature environment. Please close the door." msgstr "[ %s ]은(는) 고온 환경에서 출력해야 합니다. 도어를 닫아 주십시오." #, c-format, boost-format msgid "[ %s ] requires printing in a high-temperature environment." msgstr "[ %s ] 고온 환경에서 출력해야 합니다." #, c-format, boost-format msgid "The filament on %s may soften. Please unload." msgstr "%s의 필라멘트가 연화될 수 있습니다. 언로드하십시오." #, c-format, boost-format msgid "The filament on %s is unknown and may soften. Please set filament." msgstr "%s의 필라멘트는 알 수 없으며 연화될 수 있습니다. 필라멘트를 설정하십시오." msgid "Unable to automatically match to suitable filament. Please click to manually match." msgstr "적합한 필라멘트와 자동으로 일치시킬 수 없습니다. 수동으로 일치시키려면 클릭하십시오." msgid "Install toolhead enhanced cooling fan to prevent filament softening." msgstr "필라멘트 연화를 방지하기 위해 툴헤드 강화 냉각 팬을 설치하세요." msgid "Smooth Cool Plate" msgstr "부드러운 쿨 플레이트" msgid "Engineering Plate" msgstr "엔지니어링 플레이트" msgid "Smooth High Temp Plate" msgstr "부드러운 고온 플레이트" msgid "Textured PEI Plate" msgstr "텍스처 PEI 플레이트" msgid "Cool Plate (SuperTack)" msgstr "쿨 플레이트(슈퍼택)" msgid "Click here if you can't connect to the printer" msgstr "프린터에 연결할 수 없는 경우 여기를 클릭하세요" msgid "No login account, only printers in LAN mode are displayed." msgstr "로그인 계정이 없으며 LAN 모드의 프린터만 표시됩니다" msgid "Connecting to server..." msgstr "서버에 연결 중" msgid "Synchronizing device information..." msgstr "장치 정보 동기화 중" msgid "Synchronizing device information timed out." msgstr "장치 정보 동기화 시간 초과" # AI Translated msgid "Cannot send a print job when the printer is not at FDM mode." msgstr "프린터가 FDM 모드가 아니면 출력 작업을 전송할 수 없습니다." msgid "Cannot send a print job while the printer is updating firmware." msgstr "프린터가 펌웨어를 업데이트하는 동안 출력 작업을 보낼 수 없습니다" msgid "The printer is executing instructions. Please restart printing after it ends." msgstr "프린터가 명령을 실행하고 있습니다. 종료 후 출력을 다시 시작하세요" msgid "AMS is setting up. Please try again later." msgstr "AMS를 설정하는 중입니다. 나중에 다시 시도하세요." msgid "Not all filaments used in slicing are mapped to the printer. Please check the mapping of filaments." msgstr "슬라이싱에 사용된 모든 필라멘트가 프린터에 매핑되어 있지 않습니다. 필라멘트 매핑을 확인해 주세요." # AI Translated msgid "Please do not mix-use the Ext with AMS." msgstr "외부 스풀과 AMS를 함께 사용하지 마십시오." msgid "Invalid nozzle information, please refresh or manually set nozzle information." msgstr "노즐 정보가 잘못되었습니다. 노즐 정보를 새로 고치거나 수동으로 설정하세요." msgid "Storage needs to be inserted before printing via LAN." msgstr "LAN을 통해 출력하기 전에 스토리지를 삽입해야 합니다." # AI Translated msgid "Storage is in abnormal state or is in read-only mode." msgstr "저장 장치가 비정상 상태이거나 읽기 전용 모드입니다." msgid "Storage needs to be inserted before printing." msgstr "출력하기 전에 저장소를 삽입해야 합니다." msgid "Cannot send the print job to a printer whose firmware must be updated." msgstr "펌웨어를 업데이트해야 하는 프린터로 출력 작업을 보낼 수 없습니다." msgid "Cannot send a print job for an empty plate." msgstr "빈 플레이트에 대한 출력 작업을 보낼 수 없습니다" msgid "Storage needs to be inserted to record timelapse." msgstr "타임랩스를 녹화하려면 스토리지를 삽입해야 합니다." msgid "You have selected both external and AMS filaments for an extruder. You will need to manually switch the external filament during printing." msgstr "압출기용 외부 필라멘트와 AMS 필라멘트를 모두 선택했습니다. 출력 중에 외부 필라멘트를 수동으로 전환해야 합니다." msgid "TPU 90A/TPU 85A is too soft and does not support automatic Flow Dynamics calibration." msgstr "TPU 90A/TPU 85A는 너무 부드러워서 자동 흐름 역학 보정을 지원하지 않습니다." msgid "Set dynamic flow calibration to 'OFF' to enable custom dynamic flow value." msgstr "사용자 지정 동적 흐름 값을 사용하려면 동적 흐름 보정을 '꺼짐'으로 설정합니다." msgid "This printer does not support printing all plates." msgstr "이 프린터는 모든 플레이트 출력을 지원하지 않습니다" # AI Translated #, c-format, boost-format msgid "The current firmware supports a maximum of %s materials. You can either reduce the number of materials to %s or fewer on the Preparation Page, or try updating the firmware. If you are still restricted after the update, please wait for subsequent firmware support." msgstr "현재 펌웨어는 최대 %s개의 재료를 지원합니다. 준비 페이지에서 재료 수를 %s개 이하로 줄이거나 펌웨어를 업데이트해 보십시오. 업데이트 후에도 제한이 계속되면 이후 펌웨어에서 지원될 때까지 기다려 주십시오." # AI Translated msgid "The type of external filament is unknown or does not match with the filament type in the slicing file. Please make sure you have installed the correct filament in the external spool." msgstr "외부 필라멘트의 유형을 알 수 없거나 슬라이싱 파일의 필라멘트 유형과 일치하지 않습니다. 외부 스풀에 올바른 필라멘트를 장착했는지 확인하십시오." # AI Translated msgid "TPU 90A/TPU 85A are too soft. It is recommended to perform manual flow calibration on the 'Calibration' page. If 'Dynamic Flow Calibration' is set to auto/on, the system will use the previous calibration value and skip the flow calibration process." msgstr "TPU 90A/TPU 85A는 너무 무릅니다. '교정' 페이지에서 수동 압출량 교정을 수행하는 것이 좋습니다. '동적 압출량 교정'이 자동/켬으로 설정되어 있으면 시스템이 이전 교정값을 사용하고 압출량 교정 과정을 건너뜁니다." # AI Translated msgid "The filament in the AMS may be insufficient for this print. Please refill or replace it." msgstr "AMS의 필라멘트가 이 출력에 부족할 수 있습니다. 필라멘트를 보충하거나 교체하십시오." msgid "Current firmware does not support file transfer to internal storage." msgstr "현재 펌웨어는 내부 스토리지로의 파일 전송을 지원하지 않습니다." msgid "Send to Printer storage" msgstr "프린터 저장소로 보내기" msgid "Try to connect" msgstr "연결 시도" msgid "Internal Storage" msgstr "내부 스토리지" msgid "External Storage" msgstr "외부 스토리지" msgid "Upload file timeout, please check if the firmware version supports it." msgstr "파일 업로드 시간 초과, 펌웨어 버전이 이를 지원하는지 확인하세요." msgid "Connection timed out, please check your network." msgstr "연결 시간이 초과되었습니다. 네트워크를 확인해 주세요." msgid "Connection failed. Click the icon to retry" msgstr "연결에 실패했습니다. 아이콘을 클릭하여 다시 시도하세요." msgid "Cannot send print tasks when an update is in progress" msgstr "업그레이드가 진행 중일 때 출력 작업을 보낼 수 없습니다" msgid "The selected printer is incompatible with the chosen printer presets." msgstr "선택한 프린터가 선택한 프린터 사전 설정과 호환되지 않습니다." msgid "Storage needs to be inserted before send to printer." msgstr "프린터로 보내기 전에 저장소를 삽입해야 합니다." msgid "The printer is required to be on the same LAN as Orca Slicer." msgstr "프린터는 Orca Slicer와 동일한 네트워크에 있어야 합니다." msgid "The printer does not support sending to printer storage." msgstr "프린터가 프린터 저장소로 전송을 지원하지 않습니다." msgid "Sending..." msgstr "보내는 중..." msgid "File upload timed out. Please check if the firmware version supports this operation or verify if the printer is functioning properly." msgstr "파일 업로드 시간이 초과되었습니다. 펌웨어 버전이 이 작업을 지원하는지 확인하거나 프린터가 제대로 작동하는지 확인하세요." # AI Translated msgid "Sending failed, please try again!" msgstr "전송에 실패했습니다. 다시 시도하십시오!" msgid "Slice complete" msgstr "슬라이스 완료." msgid "View all Daily tips" msgstr "모든 일일 팁 보기" msgid "Failed to create socket" msgstr "소켓 생성 실패" msgid "Failed to connect socket" msgstr "소켓 연결 실패" msgid "Failed to publish login request" msgstr "로그인 요청 게시에 실패했습니다." msgid "Timeout getting ticket from device" msgstr "기기에서 티켓 가져오는데 시간 초과" msgid "Timeout getting ticket from server" msgstr "서버에서 티켓 가져오기 시간 초과" msgid "Failed to post ticket to server" msgstr "서버에 티켓게시 실패" msgid "Failed to parse login report reason" msgstr "로그인 보고서의 원인을 해석하는 데 실패" msgid "Receive login report timeout" msgstr "로그인 보고서 수신 시간 초과" msgid "Unknown Failure" msgstr "알 수 없는 실패" msgid "" "Please Find the Pin Code in Account page on printer screen,\n" " and type in the Pin Code below." msgstr "" "프린터 화면의 계정 페이지에서 핀 코드를 찾으십시오.\n" " 그리고 아래에 핀코드를 입력하세요." msgid "Can't find Pin Code?" msgstr "핀 코드를 찾을 수 없나요?" msgid "Pin Code" msgstr "핀 코드" msgid "Binding..." msgstr "바인딩..." msgid "Please confirm on the printer screen" msgstr "프린터 화면에서 확인해주세요" msgid "Log in failed. Please check the Pin Code." msgstr "로그인 실패. 핀 코드를 확인해주세요." msgid "Log in printer" msgstr "프린터 로그인" msgid "Would you like to log in to this printer with the current account?" msgstr "현재 계정으로 이 프린터에 로그인하시겠습니까?" msgid "Check the reason" msgstr "이유 확인" msgid "Read and accept" msgstr "읽고 동의하기" msgid "Terms and Conditions" msgstr "이용약관" msgid "Thank you for purchasing a Bambu Lab device. Before using your Bambu Lab device, please read the terms and conditions. By clicking to agree to use your Bambu Lab device, you agree to abide by the Privacy Policy and Terms of Use (collectively, the \"Terms\"). If you do not comply with or agree to the Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services." msgstr "뱀부랩 기기를 구매해 주셔서 감사합니다. 뱀부랩 기기를 사용하기 전에 이용약관을 읽어주시기 바랍니다. 뱀부랩 기기 사용에 동의하기 위해 클릭하면 개인정보 보호정책 및 이용약관(이하 통칭하여 \"약관\")을 준수하는 데 동의하는 것입니다. 뱀부랩 개인정보 처리방침을 준수하지 않거나 동의하지 않는 경우, 뱀부랩 장치 및 서비스를 사용하지 마십시오." msgid "and" msgstr "그리고" msgid "Privacy Policy" msgstr "개인정보처리방침" msgid "We ask for your help to improve everyone's printer" msgstr "모든 사람의 프린터 개선을 위해 여러분의 도움을 요청합니다" msgid "Statement about User Experience Improvement Program" msgstr "사용자 경험 개선 프로그램에 대한 설명" #, c-format, boost-format msgid "In the 3D Printing community, we learn from each other's successes and failures to adjust our own slicing parameters and settings. %s follows the same principle and uses machine learning to improve its performance from the successes and failures of the vast number of prints by our users. We are training %s to be smarter by feeding them the real-world data. If you are willing, this service will access information from your error logs and usage logs, which may include information described in Privacy Policy. We will not collect any Personal Data by which an individual can be identified directly or indirectly, including without limitation names, addresses, payment information, or phone numbers. By enabling this service, you agree to these terms and the statement about Privacy Policy." msgstr "3D 프린팅 커뮤니티에서는 서로의 성공과 실패로 부터 학습하여 각자의 슬라이싱 매개변수와 설정을 조정합니다. %s는 이와 동일한 원칙을 따르며 머신 러닝을 사용하여 사용자의 방대한 출력 성공과 실패로부터 성능을 개선합니다. 우리는 실제 데이터를 통하여 %s가 더 똑똑해지도록 훈련시킵니다. 동의하신다면 이 서비스는 오류 로그와 사용 로그를 포함할 수 있는 정보에 접근할 것입니다. 당사는 개인이 직접 또는 간접적으로 식별될 수 있는 개인 데이터, 예를 들어 이름, 주소, 결제 정보 또는 전화번호를 포함하여 어떤 개인 데이터도 수집하지 않습니다. 이 서비스를 활성화하면 이 약관과 개인정보 보호정책에 대한 설명에 동의하는 것입니다." msgid "Statement on User Experience Improvement Plan" msgstr "사용자 경험 개선 계획에 대한 성명서" msgid "Log in successful." msgstr "로그인에 성공했습니다." msgid "Log out printer" msgstr "프린터 로그아웃" msgid "Would you like to log out the printer?" msgstr "프린터에서 로그아웃하시겠습니까?" msgid "Please log in first." msgstr "먼저 로그인하세요." msgid "There was a problem connecting to the printer. Please try again." msgstr "프린터에 연결하는 동안 문제가 발생했습니다. 다시 시도하세요." msgid "Failed to log out." msgstr "로그아웃에 실패했습니다." #. TRN "Save current Settings" #, c-format, boost-format msgid "Save current %s" msgstr "현재 %s 저장" msgid "Delete this preset" msgstr "이 사전 설정 삭제" msgid "Search in preset" msgstr "사전 설정에서 찾기" # AI Translated msgid "Synchronization of different extruder drives or nozzle volume types is not supported." msgstr "서로 다른 압출기 구동 방식이나 노즐 부피 유형 간의 동기화는 지원되지 않습니다." # AI Translated msgid "Synchronize the modification of parameters to the corresponding parameters of another extruder." msgstr "변경한 매개변수를 다른 압출기의 해당 매개변수에 동기화합니다." msgid "Click to reset all settings to the last saved preset." msgstr "모든 설정을 마지막으로 저장한 사전 설정으로 되돌립니다." msgid "Prime tower is required for nozzle changing. There may be flaws on the model without prime tower. Are you sure you want to disable prime tower?" msgstr "노즐 교체를 위해 프라임 타워가 필요합니다. 프라임 타워가 없으면 모델에 결함이 있을 수 있습니다. 프라임 타워를 비활성화하시겠습니까?" msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without a prime tower. Are you sure you want to disable the prime tower?" msgstr "유연모드 타임랩스를 위해서는 프라임 타워가 필요합니다. 프라임 타워가 없는 모델에는 결함이 있을 수 있습니다. 프라임 타워를 사용하지 않도록 설정하시겠습니까?" # AI Translated msgid "A prime tower is required for clumping detection. There may be flaws on the model without prime tower. Are you sure you want to disable prime tower?" msgstr "뭉침 감지에는 프라임 타워가 필요합니다. 프라임 타워가 없으면 모델에 결함이 생길 수 있습니다. 프라임 타워를 비활성화하시겠습니까?" msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable?" msgstr "정밀 Z 높이와 프라임 타워를 동시에 활성화하면 슬라이싱 오류가 발생할 수 있습니다. 그래도 활성화하시겠습니까?" # AI Translated msgid "A prime tower is required for clumping detection. There may be flaws on the model without prime tower. Do you still want to enable clumping detection?" msgstr "뭉침 감지에는 프라임 타워가 필요합니다. 프라임 타워가 없으면 모델에 결함이 생길 수 있습니다. 그래도 뭉침 감지를 활성화하시겠습니까?" # AI Translated msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?" msgstr "정밀 Z 높이와 프라임 타워를 함께 활성화하면 슬라이싱 오류가 발생할 수 있습니다. 그래도 정밀 Z 높이를 활성화하시겠습니까?" # AI Translated msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?" msgstr "유연 모드 타임랩스를 위해서는 프라임 타워가 필요합니다. 프라임 타워가 없는 모델에는 결함이 있을 수 있습니다. 프라임 타워를 활성화하시겠습니까?" msgid "Still print by object?" msgstr "아직도 객체별로 출력하시나요?" # AI Translated msgid "" "Non-soluble support materials are not recommended for support base.\n" "Are you sure to use them for support base?\n" msgstr "" "용해되지 않는 서포트 재료는 서포트 베이스에 권장되지 않습니다.\n" "서포트 베이스에 사용하시겠습니까?\n" msgid "" "When using support material for the support interface, we recommend the following settings:\n" "0 top Z distance, 0 interface spacing, interlaced rectilinear pattern and disable independent support layer height." msgstr "" "지원 인터페이스에 대한 지원 자료를 사용할 때 다음 설정을 권장합니다.\n" "0 상단 z 거리, 0 인터페이스 간격, 인터레이스된 직선 패턴 및 독립 지지 레이어 높이 비활성화" msgid "" "Change these settings automatically?\n" "Yes - Change these settings automatically.\n" "No - Do not change these settings for me." msgstr "" "이 설정을 자동으로 변경하시겠습니까?\n" "예 - 이 설정을 자동으로 변경합니다\n" "아니요 - 이 설정을 변경하지 않습니다" # AI Translated msgid "" "When using soluble material for the support interface, we recommend the following settings:\n" "0 top Z distance, 0 interface spacing, interlaced rectilinear pattern, disable independent support layer height\n" "and use soluble materials for both support interface and support base." msgstr "" "서포트 접점에 수용성 재료를 사용할 때는 다음 설정을 권장합니다:\n" "상단 Z 거리 0, 접점 간격 0, 교차 직선 패턴, 독립 서포트 레이어 높이 비활성화\n" "그리고 서포트 접점과 서포트 베이스 모두에 수용성 재료를 사용하십시오." msgid "Enabling this option will modify the model's shape. If your print requires precise dimensions or is part of an assembly, it's important to double-check whether this change in geometry impacts the functionality of your print." msgstr "이 옵션을 활성화하면 모델의 모양이 수정됩니다. 출력물에 정확한 치수가 필요하거나 어셈블리의 일부인 경우 이러한 형상 변경이 출력물의 기능에 영향을 미치는지 다시 확인하는 것이 중요합니다." msgid "Are you sure you want to enable this option?" msgstr "이 옵션을 사용하시겠습니까?" # AI Translated msgid "Infill patterns are typically designed to handle rotation automatically to ensure proper printing and achieve their intended effects (e.g., Gyroid, Cubic). Rotating the current sparse infill pattern may lead to insufficient support. Please proceed with caution and thoroughly check for any potential printing issues. Are you sure you want to enable this option?" msgstr "채우기 패턴은 일반적으로 올바른 출력과 의도한 효과를 위해 회전을 자동으로 처리하도록 설계되어 있습니다(예: 자이로이드, 큐빅). 현재 드문 채우기 패턴을 회전시키면 지지력이 부족해질 수 있습니다. 신중하게 진행하고 출력 문제가 발생하지 않는지 충분히 확인하십시오. 이 옵션을 활성화하시겠습니까?" msgid "" "Layer height is too small.\n" "It will set to min_layer_height\n" msgstr "" "레이어 높이가 너무 작습니다.\n" "min_layer_height로 설정됩니다.\n" msgid "Layer height exceeds the limit in Printer Settings -> Extruder -> Layer height limits, this may cause printing quality issues." msgstr "레이어 높이가 프린터 설정 -> 압출기 -> 레이어의 제한을 초과합니다.높이 제한으로 인해 출력 품질 문제가 발생할 수 있습니다." msgid "Adjust to the set range automatically?\n" msgstr "설정 범위에 자동으로 맞춰지나요?\n" msgid "Adjust" msgstr "조정" msgid "Experimental feature: Retracting and cutting off the filament at a greater distance during filament changes to minimize flush. Although it can notably reduce flush, it may also elevate the risk of nozzle clogs or other printing complications." msgstr "실험적 기능: 플러시를 최소화하기 위해 필라멘트 교체 중에 더 먼 거리에서 필라멘트를 집어넣고 절단합니다. 플러시를 눈에 띄게 줄일 수 있지만 노즐 막힘이나 기타 출력 문제의 위험이 높아질 수도 있습니다." msgid "Experimental feature: Retracting and cutting off the filament at a greater distance during filament changes to minimize flush. Although it can notably reduce flush, it may also elevate the risk of nozzle clogs or other printing complications. Please use with the latest printer firmware." msgstr "실험적 기능: 플러시를 최소화하기 위해 필라멘트 교체 중에 더 먼 거리에서 필라멘트를 집어넣고 절단합니다. 플러시를 크게 줄일 수 있지만 노즐 막힘이나 기타 출력 문제의 위험을 높일 수도 있습니다. 최신 프린터 펌웨어와 함께 사용하십시오." msgid "" "When recording timelapse without toolhead, it is recommended to add a \"Timelapse Wipe Tower\" \n" "by right-click the empty position of build plate and choose \"Add Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "툴헤드 없이 시간 경과를 기록할 경우 \"타임랩스 프라임 타워\"를 추가하는 것이 좋습니다\n" "빌드 플레이트의 빈 위치를 마우스 오른쪽 버튼으로 클릭하고 \"기본 모델 추가\"-> \"타임랩스 프라임 타워\"를 선택합니다." msgid "A copy of the current system preset will be created, which will be detached from the system preset." msgstr "현재 시스템 프리셋의 복사본이 생성되며, 이 복사본은 시스템 프리셋에서 분리됩니다." msgid "The current custom preset will be detached from the parent system preset." msgstr "현재 사용자 지정 프리셋이 상위 시스템 프리셋에서 분리됩니다." msgid "Modifications to the current profile will be saved." msgstr "현재 프로필에 대한 수정 사항이 저장됩니다." msgid "" "This action is not revertible.\n" "Do you want to proceed?" msgstr "" "이 작업은 되돌릴 수 없습니다.\n" "계속 진행하시겠습니까?" msgid "Detach preset" msgstr "프리셋 분리" msgid "This is a default preset." msgstr "기본 프리셋 입니다." msgid "This is a system preset." msgstr "시스템 프리셋 입니다." msgid "Current preset is inherited from the default preset." msgstr "현재 프리셋은 기본 프리셋에서 상속됩니다." msgid "Current preset is inherited from" msgstr "현재 프리셋은 다음에서 상속됩니다" msgid "It can't be deleted or modified." msgstr "삭제하거나 수정할 수 없습니다." msgid "Any modifications should be saved as a new preset inherited from this one." msgstr "모든 수정 사항은 이 프리셋에서 상속된 새 프리셋으로 저장해야 합니다." msgid "To do that please specify a new name for the preset." msgstr "이렇게 하려면 프리셋의 새 이름을 지정하세요." msgid "Additional information:" msgstr "추가 정보:" msgid "vendor" msgstr "공급업체" msgid "printer model" msgstr "프린터 모델" msgid "default print profile" msgstr "기본 출력 프로필" msgid "default filament profile" msgstr "기본 필라멘트 프로필" msgid "default SLA material profile" msgstr "기본 SLA 재료 프로필" msgid "default SLA print profile" msgstr "기본 SLA 출력 프로필" msgid "full profile name" msgstr "전체 프로필 이름" msgid "symbolic profile name" msgstr "기호 프로필 이름" msgid "Line width" msgstr "선 너비" msgid "Precision" msgstr "정밀도" # AI Translated msgid "Z contouring" msgstr "Z 윤곽 처리" msgid "Wall generator" msgstr "벽 생성기" msgid "Walls and surfaces" msgstr "벽과 표면" msgid "Bridging" msgstr "브릿지" msgid "Walls" msgstr "벽" msgid "Top/bottom shells" msgstr "상단/하단 쉘" msgid "First layer speed" msgstr "초기 레이어 속도" msgid "Other layers speed" msgstr "다른 레이어 속도" msgid "Overhang speed" msgstr "오버행 속도" msgid "This is the speed for various overhang degrees. Overhang degrees are expressed as a percentage of line width. 0 speed means no slowing down for the overhang degree range and wall speed is used" msgstr "다양한 오버행 각도에 대한 속도입니다. 오버행 정도는 선 너비의 백분율로 표시됩니다. 0 속도는 오버행 정도에 대한 감속이 없음을 의미하며 벽 속도가 사용됩니다" msgid "Set speed for external and internal bridges" msgstr "외부 및 내부 브릿지 속도 설정" msgid "Travel speed" msgstr "이동 속도" msgid "Junction Deviation" msgstr "Junction Deviation" msgid "Jerk(XY)" msgstr "저크(XY)" msgid "Raft" msgstr "라프트" msgid "Filament for Supports" msgstr "서포트 필라멘트" msgid "Support ironing" msgstr "지지대 다림질" msgid "Tree supports" msgstr "트리 서포트" msgid "Multimaterial" msgstr "다중 재료" msgid "Filament for Features" msgstr "기능용 필라멘트" msgid "Ooze prevention" msgstr "흘러내림 방지" msgid "Special mode" msgstr "특수 모드" msgid "G-code output" msgstr "Gcode 출력" msgid "Change extrusion role G-code" msgstr "압출 역할 Gcode 변경" msgid "Post-processing Scripts" msgstr "후처리 스크립트" # AI Translated msgid "Slicing Pipeline Plugin" msgstr "슬라이싱 파이프라인 플러그인" # AI Translated msgid "Plugin Configuration" msgstr "플러그인 구성" msgid "Notes" msgstr "메모" msgid "Frequent" msgstr "빈도" #, c-format, boost-format msgid "" "Following line %s contains reserved keywords.\n" "Please remove it, or G-code visualization and print time estimation will be broken." msgid_plural "" "Following lines %s contain reserved keywords.\n" "Please remove them, or G-code visualization and print time estimation will be broken." msgstr[0] "" "다음 줄 %s에는 예약어가 포함되어 있습니다.\n" "제거해 주십시오. 그렇지 않으면 Gcode 시각화 및 출력 시간 추정치를 능가할 것입니다." msgid "Reserved keywords found" msgstr "예약어를 찾았습니다" msgid "Setting Overrides" msgstr "설정 덮어쓰기" msgid "Basic information" msgstr "기본 정보" msgid "Recommended nozzle temperature" msgstr "권장 노즐 온도" msgid "Recommended nozzle temperature range of this filament. 0 means not set" msgstr "이 필라멘트의 권장 노즐 온도 범위. 0은 설정하지 않음을 의미합니다" msgid "Flow ratio and Pressure Advance" msgstr "압출량 비율 및 PA" msgid "Print chamber temperature" msgstr "출력 챔버 온도" msgid "Chamber temperature" msgstr "챔버 온도" # AI Translated msgid "Target chamber temperature, and the minimal chamber temperature at which printing should start" msgstr "목표 챔버 온도와 출력을 시작할 최소 챔버 온도입니다" # AI Translated msgid "Target" msgstr "목표" # AI Translated msgid "Minimal" msgstr "최소" msgid "Print temperature" msgstr "출력 온도" msgid "Nozzle temperature when printing" msgstr "출력 시 노즐 온도" # AI Translated msgid "Bed temperature when the Cool Plate SuperTack is installed. A value of 0 means the filament does not support printing on the Cool Plate SuperTack." msgstr "쿨 플레이트 슈퍼택이 설치되어 있을 때의 베드 온도입니다. 값이 0이면 해당 필라멘트가 쿨 플레이트 슈퍼택에서의 출력을 지원하지 않음을 의미합니다." msgid "Cool Plate" msgstr "쿨 플레이트" msgid "This is the bed temperature when the Cool Plate is installed. A value of 0 means the filament does not support printing on the Cool Plate." msgstr "쿨 플레이트 설치 시 베드 온도. 값 0은 필라멘트가 쿨 플레이트에 출력하는 것을 지원하지 않음을 의미합니다." msgid "Textured Cool Plate" msgstr "텍스처 쿨 플레이트" # AI Translated msgid "This is the bed temperature when the Textured Cool Plate is installed. A value of 0 means the filament does not support printing on the Textured Cool Plate." msgstr "텍스처드 쿨 플레이트가 설치되었을 때의 베드 온도입니다. 값 0은 필라멘트가 텍스처드 쿨 플레이트에서 출력를 지원하지 않음을 의미합니다." msgid "This is the bed temperature when the engineering plate is installed. A value of 0 means the filament does not support printing on the Engineering Plate." msgstr "엔지니어링 플레이트가 설치 시 베드 온도. 값 0은 필라멘트가 엔지니어링 플레이트에 출력하는 것을 지원하지 않음을 의미합니다" msgid "Smooth PEI Plate / High Temp Plate" msgstr "부드러운 PEI 플레이트 / 고온 플레이트" msgid "This is the bed temperature when the Smooth PEI Plate/High Temperature Plate is installed. A value of 0 means the filament does not support printing on the Smooth PEI Plate/High Temp Plate." msgstr "부드러운 PEI 플레이트/고온 플레이트 설치 시 베드 온도. 값 0은 필라멘트가 부드러운 PEI 플레이트/고온 플레이트 출력을 지원하지 않음을 의미합니다." msgid "This is the bed temperature when the Textured PEI Plate is installed. A value of 0 means the filament does not support printing on the Textured PEI Plate." msgstr "텍스처 PEI 플레이트가 설치된 경우 베드 온도. 값 0은 필라멘트가 텍스처 PEI 플레이트에 출력하는 것을 지원하지 않음을 의미합니다." msgid "Volumetric speed limitation" msgstr "압출 속도 제한" msgid "Cooling for specific layer" msgstr "특정 레이어 냉각" msgid "Part cooling fan" msgstr "출력물 냉각 팬" msgid "Min fan speed threshold" msgstr "팬 최소 속도 임계값" # AI Translated msgid "The part cooling fan will run at the minimum fan speed when the estimated layer time is longer than the threshold value. When the layer time is shorter than the threshold, the fan speed will be interpolated between the minimum and maximum fan speed according to layer printing time." msgstr "예상 레이어 시간이 임계값보다 길면 출력물 냉각 팬이 최소 팬 속도로 작동합니다. 레이어 시간이 임계값보다 짧으면 팬 속도는 레이어 출력 시간에 따라 최소 팬 속도와 최대 팬 속도 사이의 값으로 보간됩니다." msgid "Max fan speed threshold" msgstr "팬 최대 속도 임계값" msgid "The part cooling fan will run at maximum speed when the estimated layer time is shorter than the threshold value." msgstr "예상 레이어 시간이 설정 값보다 짧을 때 출력물 냉각 팬 속도가 최대가 됩니다" msgid "Auxiliary part cooling fan" msgstr "보조 출력물 냉각 팬" msgid "Exhaust fan" msgstr "공기 여과 팬" msgid "During print" msgstr "출력 중" msgid "Complete print" msgstr "출력 완료" msgid "Filament start G-code" msgstr "필라멘트 시작 Gcode" msgid "Filament end G-code" msgstr "필라멘트 종료 Gcode" msgid "Wipe tower parameters" msgstr "프라임 타워 매개변수" msgid "Multi Filament" msgstr "멀티 필라멘트" msgid "Tool change parameters with single extruder MM printers" msgstr "다중 재료 프린터의 단일 압출기 툴 체인지 매개변수" msgid "Set" msgstr "설정" msgid "Tool change parameters with multi extruder MM printers" msgstr "다중 재료 프린터의 다중 압출기 툴 체인지 매개변수" msgid "Dependencies" msgstr "종속성" # AI Translated msgid "Compatible printers" msgstr "호환 프린터" msgid "Compatible process profiles" msgstr "호환 프로세스 사전설정" msgid "Printable space" msgstr "출력 가능 공간" #. TRN: The first argument is the parameter's name; the second argument is its value. #, boost-format msgid "Invalid value provided for parameter %1%: %2%" msgstr "%1% 매개변수에 잘못된 값이 입력됨: %2%" msgid "G-code flavor is switched" msgstr "Gcode 유형이 변경됨" msgid "Cooling Fan" msgstr "냉각 팬" msgid "Fan speed-up time" msgstr "팬 가속 시간" msgid "Extruder Clearance" msgstr "압출기 회피" msgid "Adaptive bed mesh" msgstr "적응형 베드 메시" msgid "Accessory" msgstr "악세서리" msgid "Machine G-code" msgstr "장치 Gcode" # AI Translated msgid "File header G-code" msgstr "파일 헤더 G-code" msgid "Machine start G-code" msgstr "장치 시작 Gcode" msgid "Machine end G-code" msgstr "장치 종료 Gcode" msgid "Printing by object G-code" msgstr "객체 Gcode로 출력" msgid "Before layer change G-code" msgstr "레이어 변경 전 Gcode" msgid "Layer change G-code" msgstr "레이어 변경 Gcode" msgid "Timelapse G-code" msgstr "타임랩스 Gcode" msgid "Clumping Detection G-code" msgstr "뭉침 감지 G-code" msgid "Change filament G-code" msgstr "필라멘트 교체 Gcode" msgid "Pause G-code" msgstr "일시 정지 Gcode" msgid "Template Custom G-code" msgstr "템플릿 사용자 정의 Gcode" msgid "Motion ability" msgstr "동작 능력" msgid "Normal" msgstr "일반" # AI Translated msgid "Resonance Compensation" msgstr "공진 보정" # AI Translated msgid "Resonance Avoidance Speed" msgstr "공진 회피 속도" # AI Translated msgid "Frequency" msgstr "주파수" # AI Translated msgid "The frequency of the anti-vibration signal will correspond to the natural frequency of the frame." msgstr "진동 억제 신호의 주파수는 프레임의 고유 진동수에 맞춰집니다." # AI Translated msgid "Damping" msgstr "감쇠" # AI Translated msgid "Damping ratio for the input shaping filter." msgstr "인풋 셰이핑 필터의 감쇠비입니다." msgid "Speed limitation" msgstr "속도 제한" msgid "Acceleration limitation" msgstr "가속도 제한" msgid "Jerk limitation" msgstr "저크 제한" msgid "Single extruder multi-material setup" msgstr "단일 압출기 다중 재료 설정" msgid "Number of extruders of the printer." msgstr "프린터 익스트루더 수." msgid "" "Single Extruder Multi Material is selected,\n" "and all extruders must have the same diameter.\n" "Do you want to change the diameter for all extruders to first extruder nozzle diameter value?" msgstr "" "단일 압출기 다중 재료가 선택되었습니다,\n" "를 선택하면 모든 압출기의 직경이 동일해야 합니다.\n" "모든 압출기의 직경을 첫 번째 압출기 노즐 직경 값으로 변경하시겠습니까?" msgid "Nozzle diameter" msgstr "노즐 직경" msgid "Wipe tower" msgstr "프라임 타워" msgid "Single extruder multi-material parameters" msgstr "단일 압출기 다중 재료 매개변수" msgid "This is a single extruder multi-material printer, diameters of all extruders will be set to the new value. Do you want to proceed?" msgstr "이것은 단일 압출기 다중 재료 프린터이며 모든 압출기의 직경이 새 값으로 설정됩니다. 계속 진행하시겠습니까?" msgid "Layer height limits" msgstr "레이어 높이 한도" msgid "Z-Hop" msgstr "Z올리기" msgid "Retraction when switching material" msgstr "재료 전환 시 후퇴" # AI Translated msgid "" "The Retract before wipe option could be only 100% when using the Firmware Retraction mode.\n" "\n" "Shall I set it to 100% in order to enable Firmware Retraction?" msgstr "" "펌웨어 리트렉션 모드를 사용할 때는 노즐 청소 전 후퇴 옵션을 100%로만 설정할 수 있습니다.\n" "\n" "펌웨어 리트렉션을 활성화하기 위해 100%로 설정할까요?" msgid "Firmware Retraction" msgstr "펌웨어 리트렉션" msgid "Switching to a printer with different extruder types or numbers will discard or reset changes to extruder or multi-nozzle-related parameters." msgstr "압출기 유형 또는 번호가 다른 프린터로 전환하면 압출기 또는 다중 노즐 관련 매개 변수의 변경 사항이 삭제되거나 초기화됩니다." msgid "Use Modified Value" msgstr "수정된 값 사용" msgid "Detached" msgstr "분리됨" #, c-format, boost-format msgid "%d Filament Preset and %d Process Preset is attached to this printer. Those presets would be deleted if the printer is deleted." msgstr "%d개의 필라멘트 사전 설정과 %d개의 프로세스 사전 설정이 이 프린터에 연결되어 있습니다.프린터를 삭제하면 사전 설정도 삭제됩니다." msgid "Presets inherited by other presets cannot be deleted!" msgstr "다른 프리셋에 상속된 프리셋은 삭제할 수 없습니다!" msgid "The following presets inherit this preset." msgid_plural "The following preset inherits this preset." msgstr[0] "다음 사전 설정은 이 사전 설정을 상속합니다." #. TRN Remove/Delete #, boost-format msgid "%1% Preset" msgstr "사전 설정 %1%" msgid "The following preset will be deleted too:" msgid_plural "The following presets will be deleted too:" msgstr[0] "다음 사전 설정도 삭제됩니다." msgid "" "Are you sure to delete the selected preset?\n" "If the preset corresponds to a filament currently in use on your printer, please reset the filament information for that slot." msgstr "" "선택한 사전 설정을 삭제하시겠습니까?\n" "프리셋이 현재 프린터에서 사용 중인 필라멘트와 일치하는 경우,해당 슬롯의 필라멘트 정보를 재설정해 주세요." # AI Translated #, boost-format msgid "Are you sure you want to %1% the selected preset?" msgstr "선택한 사전 설정을 %1%하시겠습니까?" # AI Translated msgid "Select printers" msgstr "프린터 선택" # AI Translated msgid "Select profiles" msgstr "프로필 선택" # AI Translated #, c-format, boost-format msgid "" " - %s:\n" " %s first layer %d %s, other layers %d %s\n" " %s max delta %d %s, current delta %d %s\n" msgstr "" " - %s:\n" " %s 초기 레이어 %d %s, 기타 레이어 %d %s\n" " %s 최대 편차 %d %s, 현재 편차 %d %s\n" # AI Translated msgid "Some first-layer and other-layer temperature pairs exceed safety limits.\n" msgstr "일부 초기 레이어와 기타 레이어의 온도 조합이 안전 한계를 초과합니다.\n" # AI Translated msgid "" "\n" "Invalid pairs:\n" msgstr "" "\n" "잘못된 조합:\n" # AI Translated msgid "" "\n" "You can go back to edit values, or continue if this is intentional." msgstr "" "\n" "돌아가서 값을 수정할 수도 있고, 의도한 것이라면 계속 진행할 수도 있습니다." # AI Translated msgid "" "\n" "\n" "Continue anyway?" msgstr "" "\n" "\n" "그래도 계속하시겠습니까?" # AI Translated msgid "Temperature Safety Check" msgstr "온도 안전 점검" msgid "Continue" msgstr "계속" # AI Translated msgid "Don't warn again for this preset" msgstr "이 사전 설정에 대해 다시 경고하지 않기" # AI Translated #, c-format, boost-format msgid "%s: %s" msgstr "%s: %s" # AI Translated msgid "No modifications need to be copied." msgstr "복사할 변경 사항이 없습니다." # AI Translated msgid "Copy paramters" msgstr "매개변수 복사" # AI Translated #, c-format, boost-format msgid "Modify paramters of %s" msgstr "%s의 매개변수 수정" # AI Translated #, c-format, boost-format msgid "Do you want to modify the following parameters of the %s to that of the %s?" msgstr "%s의 다음 매개변수를 %s의 값으로 수정하시겠습니까?" msgid "Click to reset current value and attach to the global value." msgstr "현재 값을 재설정하고 전역 값에 연결하려면 클릭합니다." msgid "Click to drop current modifications and reset to saved value." msgstr "현재 수정 내용을 삭제하고 저장된 값으로 재설정하려면 클릭하세요." msgid "Process Settings" msgstr "프로세스 설정" msgid "unsaved changes" msgstr "저장되지 않은 변경 사항" msgid "Transfer or discard changes" msgstr "변경 사항 폐기 또는 유지" msgid "Old Value" msgstr "이전 값" msgid "New Value" msgstr "새로운 값" msgid "Transfer" msgstr "이전" msgid "Don't save" msgstr "저장하지 않음" msgid "Discard" msgstr "폐기" # AI Translated msgid "the new profile" msgstr "새 프로필" # AI Translated #, boost-format msgid "" "Switch to\n" "\"%1%\"\n" "discarding any changes made in\n" "\"%2%\"." msgstr "" "다음으로 전환합니다:\n" "\"%1%\"\n" "이때 다음에서 변경한 내용은 모두 삭제됩니다:\n" "\"%2%\"." # AI Translated #, boost-format msgid "" "All \"New Value\" settings modified in\n" "\"%1%\"\n" "will be transferred to\n" "\"%2%\"." msgstr "" "다음에서 수정한 모든 \"새 값\" 설정이\n" "\"%1%\"\n" "다음으로 전달됩니다:\n" "\"%2%\"." # AI Translated #, boost-format msgid "" "All \"New Value\" settings are saved in\n" "\"%1%\"\n" "and \"%2%\" will open without any changes." msgstr "" "모든 \"새 값\" 설정이 다음에 저장됩니다:\n" "\"%1%\"\n" "그리고 \"%2%\"은(는) 변경 없이 열립니다." msgid "Click the right mouse button to display the full text." msgstr "마우스 오른쪽 버튼을 클릭하여 전체 텍스트를 표시합니다." msgid "No changes will be saved." msgstr "모든 변경 사항이 저장되지 않습니다" msgid "All changes will be discarded." msgstr "모든 변경 사항이 폐기됩니다." msgid "Save the selected options." msgstr "선택한 옵션을 저장합니다." msgid "Keep the selected options." msgstr "선택한 옵션을 유지합니다." msgid "Transfer the selected options to the newly selected preset." msgstr "선택한 옵션을 새로 선택한 사전 설정으로 이전합니다." #, boost-format msgid "" "Save the selected options to preset \n" "\"%1%\"." msgstr "" "선택한 옵션을 사전 설정에 저장\n" "\"%1%\"." #, boost-format msgid "" "Transfer the selected options to the newly selected preset \n" "\"%1%\"." msgstr "" "선택한 옵션을 새로 선택한 사전 설정으로 이전\n" "\"%1%\"." #, boost-format msgid "Preset \"%1%\" contains the following unsaved changes:" msgstr "사전 설정 \"%1%\"에는 다음 저장되지 않은 변경 사항 포함:" #, boost-format msgid "Preset \"%1%\" is not compatible with the new printer profile and it contains the following unsaved changes:" msgstr "사전 설정 \"%1%\"은(는) 새 프린터 사전설정과 호환되지 않으며 다음 저장되지 않은 변경 사항을 포함:" #, boost-format msgid "Preset \"%1%\" is not compatible with the new process profile and it contains the following unsaved changes:" msgstr "사전 설정 \"%1%\"은(는) 새 프로세스 사전설정과 호환되지 않으며 다음 저장되지 않은 변경 사항을 포함:" #, boost-format msgid "You have changed some settings of preset \"%1%\"." msgstr "사전 설정 \"%1%\"의 일부 설정을 변경했습니다." msgid "" "\n" "You can save or discard the preset values you have modified." msgstr "" "\n" "수정한 사전 설정 값을 저장하거나 삭제할 수 있습니다." msgid "" "\n" "You can save or discard the preset values you have modified, or choose to transfer the values you have modified to the new preset." msgstr "" "\n" "수정한 사전 설정 값을 저장하거나 삭제하거나, 수정한 값을 새 사전 설정으로 전송하도록 선택할 수 있습니다." msgid "You have previously modified your settings." msgstr "이전에 설정을 수정했습니다." msgid "" "\n" "You can discard the preset values you have modified, or choose to transfer the modified values to the new project" msgstr "" "\n" "수정한 사전 설정 값을 삭제하거나 수정된 ​​값을 새 프로젝트로 전송하도록 선택할 수 있습니다" msgid "Extruder count" msgstr "익스트루더 수" msgid "Capabilities" msgstr "성능" # AI Translated msgid "Left: " msgstr "왼쪽: " # AI Translated msgid "Right: " msgstr "오른쪽: " msgid "Show all presets (including incompatible)" msgstr "모든 사전 설정 표시(호환되지 않는 설정 포함)" msgid "Select presets to compare" msgstr "비교할 사전 설정 선택" # AI Translated msgid "Left Preset Value" msgstr "왼쪽 사전 설정 값" # AI Translated msgid "Right Preset Value" msgstr "오른쪽 사전 설정 값" msgid "You can only transfer to current active profile because it has been modified." msgstr "현재 활성 프로필이 수정되었으므로 현재 활성 프로필로만 전송할 수 있습니다." msgid "" "Transfer the selected options from left preset to the right.\n" "Note: New modified presets will be selected in settings tabs after close this dialog." msgstr "" "선택한 옵션을 왼쪽 프리셋에서 오른쪽으로 옮깁니다.\n" "참고: 이 대화 상자를 닫은 후 설정 탭에서 새로 수정된 프리셋이 선택됩니다." msgid "Transfer values from left to right" msgstr "왼쪽에서 오른쪽으로 값 전송" msgid "If enabled, this dialog can be used for transfer selected values from left to right preset." msgstr "이 대화 상자를 활성화하면 선택한 값을 왼쪽에서 오른쪽으로 사전 설정으로 변환하는 데 사용할 수 있습니다." # AI Translated msgid "One of the presets does not exist" msgstr "사전 설정 중 하나가 존재하지 않습니다" # AI Translated msgid "Compared presets has different printer technology" msgstr "비교한 사전 설정의 프린터 기술이 서로 다릅니다" msgid "Add File" msgstr "파일 추가" msgid "Set as cover" msgstr "커버로 설정" msgid "Cover" msgstr "커버" #, boost-format msgid "The name \"%1%\" already exists." msgstr "%1% 이름이 이미 있습니다." msgid "Basic Info" msgstr "기본 정보" msgid "Pictures" msgstr "사진" msgid "Bill of Materials" msgstr "재료 명세서" msgid "Assembly Guide" msgstr "조립 가이드" msgid "Author" msgstr "원작자" msgid "Model Name" msgstr "모델명" msgid "Description:" msgstr "설명:" #, c-format, boost-format msgid "%s Update" msgstr "%s 업데이트" msgid "A new version is available" msgstr "새 버전을 사용할 수 있습니다" msgid "Configuration update" msgstr "구성 업데이트" msgid "A new configuration package is available. Do you want to install it?" msgstr "새 구성 패키지를 사용할 수 있습니다. 설치하시겠습니까?" msgid "the configuration package is incompatible with the current application." msgstr "구성 패키지가 현재 응용 프로그램과 호환되지 않습니다." #, c-format, boost-format msgid "" "The configuration package is incompatible with the current application.\n" "%s will update the configuration package to allow the application to start." msgstr "" "구성 패키지가 현재 애플리케이션과 호환되지 않습니다.\n" "%s는 구성 패키지를 업데이트합니다. 그렇지 않으면 시작할 수 없습니다" #, c-format, boost-format msgid "Exit %s" msgstr "%s 종료" msgid "Configuration updates" msgstr "구성 업데이트" msgid "No updates available." msgstr "사용 가능한 업데이트가 없습니다." msgid "The configuration is up to date." msgstr "구성이 최신 상태입니다." msgid "OBJ file import color" msgstr "Obj 파일 가져오기 색상" msgid "Some faces don't have color defined." msgstr "일부 면에는 색상이 정의되어 있지 않습니다." # AI Translated msgid "MTL file exist error, could not find the material:" msgstr "MTL 파일 오류로 재료를 찾을 수 없습니다:" # AI Translated msgid "Please check OBJ or MTL file." msgstr "OBJ 또는 MTL 파일을 확인하십시오." msgid "Specify number of colors:" msgstr "색상 수 지정:" msgid "Enter or click the adjustment button to modify number again" msgstr "숫자를 다시 수정하려면 입력하거나 조정 버튼을 클릭하세요." msgid "Recommended " msgstr "추천 " msgid "view" msgstr "보기" msgid "Current filament colors" msgstr "현재 필라멘트 색상" msgid "Matching" msgstr "매칭" msgid "Quick set" msgstr "빠른 설정" msgid "Color match" msgstr "색상 일치" msgid "Approximate color matching." msgstr "대략적인 색상 일치." msgid "Append" msgstr "추가" msgid "Append to existing filaments" msgstr "기존 필라멘트에 추가" msgid "Reset mapped extruders." msgstr "매핑된 압출기를 재설정합니다." msgid "Note" msgstr "메모" msgid "" "The color has been selected, you can choose OK \n" " to continue or manually adjust it." msgstr "" "색상이 선택되었으면 확인\n" " 을 선택하여 계속하거나 수동으로 조정할 수 있습니다." msgid "—> " msgstr "—> " msgid "" "Synchronizing AMS filaments will discard your modified but unsaved filament presets.\n" "Are you sure you want to continue?" msgstr "" "AMS 필라멘트를 동기화하면 수정되었지만 저장되지 않은 필라멘트 사전 설정이 삭제됩니다.\n" "계속하시겠습니까?" msgctxt "Sync_AMS" msgid "Original" msgstr "원본" msgid "After mapping" msgstr "매핑 후" msgid "After overwriting" msgstr "덮어쓰기 후" msgctxt "Sync_AMS" msgid "Plate" msgstr "접시" msgid "The connected printer does not match the currently selected printer. Please change the selected printer." msgstr "연결된 프린터가 현재 선택한 프린터와 일치하지 않습니다. 선택한 프린터를 변경하세요." msgid "Mapping" msgstr "맵핑" msgid "Overwriting" msgstr "덮어쓰기" msgid "Reset all filament mapping" msgstr "모든 필라멘트 매핑 재설정" msgid "(Recommended filament)" msgstr "(권장 필라멘트)" msgid "Advanced Options" msgstr "고급 옵션" msgid "" "Check heatbed flatness. Leveling makes extruded height uniform.\n" "*Automatic mode: Level first (about 10 seconds). Skip if surface is fine." msgstr "" "열판 평탄도를 확인합니다. 수평을 맞추면 압출 높이가 균일해집니다.\n" "*자동 모드: 먼저 수평을 맞춥니다(약 10초). 표면이 평탄하면 건너뜁니다." msgid "" "Calibrate nozzle offsets to enhance print quality.\n" "*Automatic mode: Check for calibration before printing; skip if unnecessary." msgstr "" "노즐 오프셋을 보정하여 출력 품질을 향상시킵니다.\n" "*자동 모드: 출력하기 전에 보정 여부를 확인하고 불필요한 경우 건너뜁니다." msgid "Use AMS" msgstr "AMS 사용" msgid "Tip" msgstr "도움말" msgid "Only synchronize filament type and color, not including AMS slot information." msgstr "필라멘트 유형과 색상만 동기화하며, AMS 슬롯 정보는 포함하지 않습니다." msgid "Replace the project filaments list sequentially based on printer filaments. And unused printer filaments will be automatically added to the end of the list." msgstr "프린터 필라멘트를 기준으로 프로젝트 필라멘트 목록을 순차적으로 교체합니다. 사용하지 않는 프린터 필라멘트는 자동으로 목록 끝에 추가됩니다." msgid "Add unused AMS filaments to filaments list." msgstr "미사용 AMS 필라멘트를 필라멘트 목록에 추가하기." msgid "Automatically merge the same colors in the model after mapping." msgstr "매핑 후 모델에서 동일한 색상을 자동으로 병합합니다." msgid "After being synced, this action cannot be undone." msgstr "동기화 후에는 이 작업을 취소할 수 없습니다." msgid "After being synced, the project's filament presets and colors will be replaced with the mapped filament types and colors. This action cannot be undone." msgstr "동기화되면 프로젝트의 필라멘트 사전 설정과 색상이 매핑된 필라멘트 유형과 색상으로 바뀝니다. 이 작업은 실행 취소할 수 없습니다." msgid "Are you sure to synchronize the filaments?" msgstr "필라멘트를 동기화하시겠습니까?" msgid "Synchronize now" msgstr "지금 동기화" msgid "Synchronize Filament Information" msgstr "필라멘트 정보 동기화" msgid "Add unused filaments to filaments list." msgstr "미사용 필라멘트를 필라멘트 목록에 추가하기." msgid "Only synchronize filament type and color, not including slot information." msgstr "슬롯 정보는 포함하지 않고 필라멘트 유형과 색상만 동기화합니다." msgid "Ext spool" msgstr "외부 스풀" msgid "Please check whether the nozzle type of the device is the same as the preset nozzle type." msgstr "장치의 노즐 유형이 사전 설정된 노즐 유형과 동일한지 확인하세요." msgid "Storage is not available or is in read-only mode." msgstr "저장소를 사용할 수 없거나 읽기 전용 모드입니다." #, c-format, boost-format msgid "The selected printer (%s) is incompatible with the chosen printer profile in the slicer (%s)." msgstr "선택한 프린터(%s)는 슬라이서(%s)에서 선택한 프린터 프로필과 호환되지 않습니다." msgid "Timelapse is not supported because Print sequence is set to \"By object\"." msgstr "출력 순서가 \"객체별\"로 설정되어 있으므로 시간 경과는 지원되지 않습니다." msgid "You selected external and AMS filament at the same time in an extruder, you will need manually change external filament." msgstr "압출기에서 외부 필라멘트와 AMS 필라멘트를 동시에 선택한 경우 외부 필라멘트를 수동으로 변경해야 합니다." msgid "Successfully synchronized nozzle information." msgstr "노즐 정보를 성공적으로 동기화했습니다." msgid "Successfully synchronized nozzle and AMS number information." msgstr "노즐 및 AMS 번호 정보를 성공적으로 동기화했습니다." # AI Translated msgid "Do you want to continue to sync filaments?" msgstr "필라멘트 동기화를 계속하시겠습니까?" # AI Translated msgid "Successfully synchronized filament color from printer." msgstr "프린터에서 필라멘트 색상을 성공적으로 동기화했습니다." msgid "Successfully synchronized color and type of filament from printer." msgstr "프린터에서 색상과 필라멘트 유형을 성공적으로 동기화했습니다." msgctxt "FinishSyncAms" msgid "OK" msgstr "확인" msgid "Ramming customization" msgstr "채워넣기 사용자 정의" msgid "" "Ramming denotes the rapid extrusion just before a tool change in a single-extruder MM printer. Its purpose is to properly shape the end of the unloaded filament so it does not prevent insertion of the new filament and can itself be reinserted later. This phase is important and different materials can require different extrusion speeds to get the good shape. For this reason, the extrusion rates during ramming are adjustable.\n" "\n" "This is an expert-level setting, incorrect adjustment will likely lead to jams, extruder wheel grinding into filament etc." msgstr "" "채워넣기는 단일 압출기 다중 재료 프린터에서 툴 체인지 직전의 급속 압출을 의미합니다. 필라멘트를 뺄때 끝 모양을 적절하게 형성하여 새 필라멘트의 삽입을 방해하지 않고 나중에 다시 삽입할 수 있도록 하는 것입니다. 이 단계는 중요하며, 좋은 모양을 얻으려면 재료마다 다른 압출 속도가 필요할 수 있습니다. 이러한 이유로 채우기 중 압출 속도는 조정 가능합니다.\n" "\n" "이는 전문가 수준 설정이므로 잘못 조정하면 막힘, 필라멘트 갈림 등이 발생할 수 있습니다." # AI Translated #, boost-format msgid "For constant flow rate, hold %1% while dragging." msgstr "압출량을 일정하게 유지하려면 %1%을(를) 누른 채로 드래그하십시오." msgid "ms" msgstr "ms" # AI Translated msgid "Total ramming" msgstr "전체 채워넣기" # AI Translated msgid "Volume" msgstr "부피" # AI Translated msgid "Ramming line" msgstr "채워넣기 선" # AI Translated msgid "Orca would re-calculate your flushing volumes everytime the filaments color changed or filaments changed. You could disable the auto-calculate in Orca Slicer > Preferences" msgstr "Orca는 필라멘트 색상이 바뀌거나 필라멘트가 변경될 때마다 플러시 용량을 다시 계산합니다. Orca Slicer > 기본 설정에서 자동 계산을 비활성화할 수 있습니다" msgid "Flushing volume (mm³) for each filament pair." msgstr "각 필라멘트 쌍에 대한 버리기 볼륨(mm³)." #, c-format, boost-format msgid "Suggestion: Flushing Volume in range [%d, %d]" msgstr "제안: [%d, %d] 범위의 버리기 볼륨" #, c-format, boost-format msgid "The multiplier should be in range [%.2f, %.2f]." msgstr "승수는 [%.2f, %.2f] 범위에 있어야 합니다." msgid "Re-calculate" msgstr "다시 계산" msgid "Multiplier" msgstr "승수" msgid "Flushing volumes for filament change" msgstr "필라멘트 교체를 위한 버리기 볼륨" msgid "Please choose the filament colour" msgstr "필라멘트 색상을 선택하세요" # AI Translated msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer." msgstr "네이티브 Wayland 실시간 보기에는 GStreamer GTK 비디오 싱크가 필요합니다. GStreamer용 gtksink 플러그인을 설치한 후 OrcaSlicer를 다시 시작하십시오." # AI Translated msgid "Failed to initialize the native Wayland GStreamer video sink. Please check your GStreamer GTK plugin installation." msgstr "네이티브 Wayland GStreamer 비디오 싱크를 초기화하지 못했습니다. GStreamer GTK 플러그인 설치 상태를 확인하십시오." msgid "Windows Media Player is required for this task! Do you want to enable 'Windows Media Player' for your operation system?" msgstr "이 작업에는 Windows Media Player가 필요합니다! 운영 체제에서 Windows Media Player를 활성화하시겠습니까?" msgid "BambuSource has not correctly been registered for media playing! Press Yes to re-register it. You will be promoted twice" msgstr "뱀부소스가 미디어 재생에 올바르게 등록되지 않았습니다! 다시 등록하려면 예를 누르세요. 두 번 승격됩니다" # AI Translated msgid "Missing BambuSource component registered for media playing! Please re-install OrcaSlicer or seek community help." msgstr "미디어 재생용으로 등록된 BambuSource 구성 요소가 없습니다! OrcaSlicer를 다시 설치하거나 커뮤니티에 도움을 요청하십시오." msgid "Using a BambuSource from a different install, video play may not work correctly! Press Yes to fix it." msgstr "다른 설치 버전의 뱀부소스를 사용하면 동영상 재생이 제대로 작동하지 않을 수 있습니다! 예를 눌러 문제를 해결하세요." msgid "Your system is missing H.264 codecs for GStreamer, which are required to play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-libav packages, then restart Orca Slicer?)" msgstr "시스템에 동영상 재생을 위해 필요한 GStreamer용 H.264 코덱이 존재하지 않습니다. (gstreamer1.0-plugins-bad 또는 gstreamer1.0-libav 패키지를 설치한 다음 Orca Slicer를 다시 실행하십시오.)" # AI Translated msgid "Cloud agent is not available. Please restart OrcaSlicer and try again." msgstr "클라우드 에이전트를 사용할 수 없습니다. OrcaSlicer를 다시 시작한 후 다시 시도하십시오." msgid "Bambu Network plug-in not detected." msgstr "뱀부 네트워크 플러그인이 감지되지 않습니다." msgid "Click here to download it." msgstr "다운로드하려면 여기를 클릭하세요." msgid "Login" msgstr "로그인" # AI Translated msgid "Login failed. Please try again." msgstr "로그인에 실패했습니다. 다시 시도하십시오." # AI Translated msgid "parse json failed" msgstr "JSON 구문 분석 실패" # AI Translated msgid "[Action Required] " msgstr "[조치 필요] " # AI Translated msgid "[Action Required]" msgstr "[조치 필요]" msgid "The configuration package is changed in previous Config Guide" msgstr "이전 구성 가이드에서 구성 패키지가 변경되었습니다" msgid "Configuration package changed" msgstr "구성 패키지가 변경됨" msgid "Toolbar" msgstr "도구 모음" msgid "Objects list" msgstr "객체 목록" msgid "Import geometry data from STL/STEP/3MF/OBJ/AMF files" msgstr "STL/STEP/3MF/OBJ/AMF 파일에서 형상 데이터 가져오기" msgid "Paste from clipboard" msgstr "클립보드에서 붙여넣기" msgid "Show/Hide 3Dconnexion devices settings dialog" msgstr "3D 연결 장치 설정 표시/숨기기 대화상자" msgid "Switch table page" msgstr "테이블 페이지 전환" msgid "Show keyboard shortcuts list" msgstr "키보드 단축키 목록 보기" msgid "Global shortcuts" msgstr "전역 단축키" msgid "Pan View" msgstr "보기 이동" msgid "Rotate View" msgstr "보기 회전" # AI Translated msgid "Middle mouse button" msgstr "마우스 가운데 버튼" msgid "Zoom View" msgstr "줌 뷰" msgid "Auto orients selected objects or all objects. If there are selected objects, it just orients the selected ones. Otherwise, it will orient all objects in the current project." msgstr "선택한 객체 또는 모든 객체의 방향을 자동으로 조정합니다. 선택한 객체가 있는 경우 선택한 객체만 조정되고, 그렇지 않은 경우 프로젝트의 모든 객체가 조정됩니다." msgid "Auto orients all objects on the active plate." msgstr "현재 플레이트에 있는 모든 객체의 방향을 자동으로 지정합니다." msgid "Collapse/Expand the sidebar" msgstr "사이드바 접기/펼치기" msgid "Any arrow" msgstr "모든 화살표" msgid "Movement in camera space" msgstr "카메라 공간에서 이동" msgid "Select a part" msgstr "부품 선택" msgid "Select multiple objects" msgstr "여러 객체 선택" msgid "Select objects by rectangle" msgstr "사각형으로 객체 선택" # AI Translated msgctxt "Keyboard Shortcut" msgid "Arrow Up" msgstr "↑" msgid "Move selection 10mm in positive Y direction" msgstr "선택 항목을 +Y 방향으로 10mm 이동" # AI Translated msgctxt "Keyboard Shortcut" msgid "Arrow Down" msgstr "↓" msgid "Move selection 10mm in negative Y direction" msgstr "선택 항목을 -Y 방향으로 10mm 이동" # AI Translated msgctxt "Keyboard Shortcut" msgid "Arrow Left" msgstr "←" msgid "Move selection 10mm in negative X direction" msgstr "선택 항목을 -X 방향으로 10mm 이동" # AI Translated msgctxt "Keyboard Shortcut" msgid "Arrow Right" msgstr "→" msgid "Move selection 10mm in positive X direction" msgstr "선택 항목을 +X 방향으로 10mm 이동" # AI Translated msgid "Movement step set to 1mm" msgstr "이동 단위를 1mm로 설정" msgid "Keyboard 1-9: set filament for object/part" msgstr "키보드 1-9: 객체/부품에 필라멘트 할당" msgid "Camera view - Default" msgstr "카메라 시점 - 기본" msgid "Camera view - Top" msgstr "카메라 시점 - 위" msgid "Camera view - Bottom" msgstr "카메라 시점 - 아래" msgid "Camera view - Front" msgstr "카메라 시점 - 앞" msgid "Camera view - Behind" msgstr "카메라 시점 - 뒤" msgid "Camera Angle - Left side" msgstr "카메라 각도 - 좌측" msgid "Camera Angle - Right side" msgstr "카메라 각도 - 우측" msgid "Select all objects" msgstr "모든 객체 선택" msgid "Gizmo move" msgstr "변형도구 이동" msgid "Gizmo rotate" msgstr "변형도구 회전" msgid "Gizmo scale" msgstr "변형도구 배율" msgid "Gizmo place face on bed" msgstr "변형도구 바닥면 선택" msgid "Gizmo cut" msgstr "변형도구 잘라내기" msgid "Gizmo mesh boolean" msgstr "변형도구 합집합/차집합/교집합" # AI Translated msgid "Gizmo FDM paint-on fuzzy skin" msgstr "변형도구 FDM 퍼지 스킨 칠하기" msgid "Gizmo SLA support points" msgstr "변형도구 서포트 칠하기" msgid "Gizmo FDM paint-on seam" msgstr "변형도구 재봉선 칠하기" msgid "Gizmo text emboss/engrave" msgstr "변형도구 - 텍스트 엠보싱/인그레이빙" msgid "Gizmo measure" msgstr "변형도구 측정" msgid "Gizmo assemble" msgstr "변형도구 병합" msgid "Gizmo brim ears" msgstr "변형도구 브림 귀" msgid "Zoom in" msgstr "확대" msgid "Zoom out" msgstr "축소" # AI Translated msgid "Toggle printable for object/part" msgstr "객체/부품의 출력 가능 여부 전환" # AI Translated msgctxt "Keyboard Shortcut" msgid "Tab" msgstr "Tab" msgid "Switch between Prepare/Preview" msgstr "준비 하기/미리 보기 전환" # AI Translated msgctxt "Keyboard Shortcut" msgid "Space" msgstr "Space" # AI Translated msgid "Open actions speed dial" msgstr "작업 스피드 다이얼 열기" msgid "Plater" msgstr "출력판" msgid "Move: press to snap by 1mm" msgstr "이동: 눌러서 1mm씩 이동" msgid "Support/Color Painting: adjust pen radius" msgstr "서포트/색상 칠하기: 펜 반경 조정" msgid "Support/Color Painting: adjust section position" msgstr "서포트/색상 칠하기: 단면 위치 조정" msgid "Gizmo" msgstr "변형도구" msgid "Set extruder number for the objects and parts" msgstr "객체 및 부품에 대한 압출기 번호 설정" msgid "Delete objects, parts, modifiers" msgstr "객체, 부품, 수정자 삭제" msgid "Select the object/part and press space to change the name" msgstr "객체/부품을 선택하고 스페이스바를 눌러 이름을 변경합니다" msgid "Mouse click" msgstr "마우스 클릭" msgid "Select the object/part and mouse click to change the name" msgstr "객체/부품을 선택하고 마우스를 클릭하여 이름을 변경합니다" msgid "Objects List" msgstr "객체 목록" msgid "Vertical slider - Move active thumb Up" msgstr "수직 슬라이더 - 활성 레이어 위로 이동" msgid "Vertical slider - Move active thumb Down" msgstr "수직 슬라이더 - 활성 레이어 아래로 이동" msgid "Horizontal slider - Move active thumb Left" msgstr "수평 슬라이더 - 활성 라인 왼쪽으로 이동" msgid "Horizontal slider - Move active thumb Right" msgstr "수평 슬라이더 - 활성 라인 오른쪽으로 이동" msgid "On/Off one layer mode of the vertical slider" msgstr "수직 슬라이더의 한 레이어 모드 켜기/끄기" msgid "On/Off G-code window" msgstr "Gcode 창 켜기/끄기" msgid "Move slider 5x faster" msgstr "슬라이더를 5배 빠르게 이동" # AI Translated msgctxt "Keyboard Shortcut" msgid "Home" msgstr "Home" msgid "Horizontal slider - Move to start position" msgstr "수평 슬라이더 - 시작 위치로 이동" # AI Translated msgctxt "Keyboard Shortcut" msgid "End" msgstr "End" msgid "Horizontal slider - Move to last position" msgstr "수평 슬라이더 - 마지막 위치로 이동" msgid "Release Note" msgstr "릴리스 노트" #, c-format, boost-format msgid "version %s update information:" msgstr "버전 %s 업데이트 정보 :" msgid "Network plug-in update" msgstr "네트워크 플러그인 업데이트" # AI Translated msgid "Click OK to update the Network plug-in now. If a file is in use, the update will be applied the next time Orca Slicer launches." msgstr "지금 네트워크 플러그인을 업데이트하려면 확인을 클릭하십시오. 파일이 사용 중인 경우 업데이트는 Orca Slicer를 다음에 실행할 때 적용됩니다." # AI Translated msgid "A new Network plug-in is available. Do you want to install it?" msgstr "새 네트워크 플러그인을 사용할 수 있습니다. 설치하시겠습니까?" #, c-format, boost-format msgid "A new Network plug-in (%s) is available. Do you want to install it?" msgstr "새 네트워크 플러그인(%s)을 사용할 수 있습니다. 설치하시겠습니까?" msgid "New version of Orca Slicer" msgstr "Orca Slicer의 새 버전" # AI Translated msgid "Check on Microsoft Store" msgstr "Microsoft Store에서 확인" # AI Translated msgid "Check on GitHub" msgstr "GitHub에서 확인" # AI Translated msgid "Open Microsoft Store" msgstr "Microsoft Store 열기" msgid "Skip this Version" msgstr "이 버전 건너뛰기" # AI Translated #, c-format, boost-format msgid "New version available: %s. Please update OrcaSlicer from the Microsoft Store." msgstr "새 버전을 사용할 수 있습니다: %s. Microsoft Store에서 OrcaSlicer를 업데이트하십시오." msgid "Confirm and Update Nozzle" msgstr "노즐 확인 및 업데이트" msgid "Connect the printer using IP and access code" msgstr "IP 및 액세스 코드를 사용하여 프린터 연결" msgid "Try the following methods to update the connection parameters and reconnect to the printer." msgstr "연결 매개변수를 업데이트하고 프린터에 다시 연결하려면 다음 방법을 시도해 보세요." # AI Translated msgid "1. Please confirm Orca Slicer and your printer are in the same LAN." msgstr "1. Orca Slicer와 프린터가 같은 LAN에 있는지 확인하십시오." msgid "2. If the IP and Access Code below are different from the actual values on your printer, please correct them." msgstr "2. 아래 IP 및 액세스 코드가 프린터의 실제 값과 다른 경우 이를 수정하세요." msgid "3. Please obtain the device SN from the printer side; it is usually found in the device information on the printer screen." msgstr "3. 일반적으로 프린터 화면의 장치 정보에서 찾을 수 있는 장치 SN을 프린터 측에서 받으세요." msgid "IP" msgstr "IP" msgid "Access Code" msgstr "액세스 코드" msgid "Printer model" msgstr "프린터 모델" msgid "Printer name" msgstr "프린터 이름" msgid "Where to find your printer's IP and Access Code?" msgstr "프린터의 IP 및 액세스 코드는 어디에서 찾을 수 있습니까?" # AI Translated msgid "How to trouble shooting" msgstr "문제 해결 방법" msgid "Connect" msgstr "연결" msgid "Manual Setup" msgstr "수동 설정" msgid "IP and Access Code Verified! You may close the window" msgstr "IP 및 액세스 코드가 확인되었습니다. 창을 닫아도 됩니다" msgid "connecting..." msgstr "연결중..." msgid "Failed to connect to printer." msgstr "프린터에 연결하지 못했습니다." msgid "Failed to publish login request." msgstr "로그인 요청을 게시하지 못했습니다." msgid "The printer has already been bound." msgstr "프린터가 이미 바인딩되었습니다." msgid "The printer mode is incorrect, please switch to LAN Only." msgstr "프린터 모드가 올바르지 않습니다. LAN 전용으로 전환하세요." msgid "Connecting to printer... The dialog will close later" msgstr "프린터에 연결 중... 대화 상자가 나중에 닫힙니다." msgid "Connection failed, please double check IP and Access Code" msgstr "연결에 실패했습니다. IP와 액세스 코드를 다시 확인하세요" msgid "" "Connection failed! If your IP and Access Code is correct, \n" "please move to step 3 for troubleshooting network issues" msgstr "" "연결에 실패했습니다. IP와 액세스 코드가 올바른 경우 \n" "네트워크 문제를 해결하려면 3단계로 이동하세요" msgid "Connection failed! Please refer to the wiki page." msgstr "연결에 실패했습니다! 위키 페이지를 참조하세요." msgid "sending failed" msgstr "전송 실패" msgid "Failed to send. Click Retry to attempt sending again. If retrying does not work, please check the reason." msgstr "전송하지 못했습니다. 다시 보내기를 클릭하여 다시 전송을 시도합니다. 다시 시도해도 전송이 되지 않으면 이유를 확인하세요." msgid "reconnect" msgstr "다시 연결" msgid "Air Pump" msgstr "공기 펌프" msgid "Laser 10W" msgstr "레이저 10W" msgid "Laser 40W" msgstr "레이저 40W" msgid "Cutting Module" msgstr "커팅 모듈" msgid "Auto Fire Extinguishing System" msgstr "자동 화재 진압 시스템" # AI Translated msgid "Filament Track Switch" msgstr "Filament Track Switch" msgid "Beta" msgstr "Beta" msgid "Update firmware" msgstr "펌웨어 업데이트" msgid "Beta version" msgstr "베타 버전" msgid "Updating" msgstr "업데이트 중" msgid "Update failed" msgstr "업데이트 실패" msgid "Update successful" msgstr "업데이트 성공" msgid "Hotends on Rack" msgstr "랙의 핫엔드" msgid "Are you sure you want to update? This will take about 10 minutes. Do not turn off the power while the printer is updating." msgstr "업데이트하시겠습니까? 약 10분 정도 소요됩니다. 프린터가 업데이트되는 동안에는 전원을 끄지 마십시오." msgid "An important update was detected and needs to be run before printing can continue. Do you want to update now? You can also update later from 'Update firmware'." msgstr "중요한 업데이트가 감지되었으며 출력을 계속하려면 먼저 업데이트해야 합니다. 지금 업데이트하시겠습니까? '펌웨어 업그레이드'에서 나중에 업데이트할 수도 있습니다." # AI Translated msgid "The firmware version is abnormal. Repairing and updating are required before printing. Do you want to update now? You can also update later on the printer or update next time you start Orca Slicer." msgstr "펌웨어 버전이 비정상입니다. 출력하기 전에 수리 및 업데이트가 필요합니다. 지금 업데이트하시겠습니까? 나중에 프린터에서 업데이트하거나 다음에 Orca Slicer를 시작할 때 업데이트할 수도 있습니다." msgid "Extension Board" msgstr "확장 보드" # AI Translated #, boost-format msgid "Split into %1% parts" msgstr "%1%개의 부품으로 분할" msgid "Repair finished" msgstr "수리 완료" msgid "Repair failed" msgstr "수리에 실패하였습니다." msgid "Repair canceled" msgstr "수리 취소됨" #, boost-format msgid "Copying of file %1% to %2% failed: %3%" msgstr "파일 %1%를 %2%으로 복사 실패: %3%" msgid "Please check any unsaved changes before updating the configuration." msgstr "구성 업데이트 전에 저장되지 않은 변경 사항을 확인해야 합니다." msgid "Configuration package: " msgstr "구성 패키지: " msgid " updated to " msgstr " 로 업데이트되었습니다 " msgid "Open G-code file:" msgstr "Gcode 파일 열기:" msgid "One object has an empty first layer and can't be printed. Please Cut the bottom or enable supports." msgstr "객체 하나에 초기 레이어가 비어 있어 출력할 수 없습니다. 바닥을 자르거나 서포트를 활성화하세요." #, boost-format msgid "The object has empty layers between %1% and %2% and can’t be printed." msgstr "%1%에서 %2% 사이의 빈 레이어에 대해 객체를 출력할 수 없습니다." #, boost-format msgid "Object: %1%" msgstr "객체: %1%" msgid "Parts of the object at these heights may be too thin or the object may have a faulty mesh." msgstr "이 높이에 있는 객체의 일부가 너무 얇거나 객체에 결함이 있는 메시가 있을 수 있습니다" # AI Translated msgid "Process change extrusion role G-code" msgstr "프로세스 압출 역할 변경 G-code" # AI Translated msgid "Filament change extrusion role G-code" msgstr "필라멘트 압출 역할 변경 G-code" msgid "No object can be printed. It may be too small." msgstr "객체를 출력할 수 없습니다. 너무 작을 수 있습니다" msgid "Your print is very close to the priming regions. Make sure there is no collision." msgstr "출력물이 프라이밍 영역에 매우 가깝습니다. 충돌이 없는지 확인합니다." msgid "" "Failed to generate G-code for invalid custom G-code.\n" "\n" msgstr "" "잘못된 사용자 정의 Gcode로 인해 gcode를 생성하지 못했습니다.\n" "\n" msgid "Please check the custom G-code or use the default custom G-code." msgstr "사용자 정의 Gcode를 확인하거나 기본 사용자 정의 Gcode를 사용하세요." #, boost-format msgid "Generating G-code: layer %1%" msgstr "Gcode 생성 중: 레이어 %1%" msgid "Flush volumes matrix do not match to the correct size!" msgstr "플러시 볼륨 매트릭스가 올바른 크기와 일치하지 않습니다!" # AI Translated msgid "set_accel_and_jerk() is only supported by Klipper" msgstr "set_accel_and_jerk()는 Klipper에서만 지원됩니다" # AI Translated msgid "" "Input shaping is not supported by Marlin < 2.1.2.\n" "Check your firmware version and update your G-code flavor to ´Marlin 2´." msgstr "" "인풋 셰이핑은 Marlin 2.1.2 미만에서는 지원되지 않습니다.\n" "펌웨어 버전을 확인하고 G-code 유형을 ´Marlin 2´로 변경하십시오." # AI Translated msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2." msgstr "인풋 셰이핑은 Klipper, RepRapFirmware, Marlin 2에서만 지원됩니다." msgid "Grouping error: " msgstr "그룹화 오류입니다:" msgid " can not be placed in the " msgstr " 에 배치할 수 없습니다" # AI Translated msgid "Group error in manual mode. Please check nozzle count or regroup." msgstr "수동 모드에서 그룹 오류가 발생했습니다. 노즐 개수를 확인하거나 다시 그룹화하십시오." msgid "Internal Bridge" msgstr "내부 브릿지" msgid "undefined error" msgstr "정의되지 않은 오류" msgid "too many files" msgstr "파일이 너무 많습니다" msgid "File too large" msgstr "파일이 너무 큽니다" msgid "unsupported method" msgstr "지원되지 않는 방법" msgid "unsupported encryption" msgstr "지원되지 않는 암호화" msgid "unsupported feature" msgstr "지원되지 않는 기능" msgid "failed finding central directory" msgstr "중앙 디렉토리를 찾지 못했습니다" msgid "not a ZIP archive" msgstr "ZIP 형식의 압축파일이 아닙니다" msgid "invalid header or corrupted" msgstr "잘못된 헤더이거나 손상됨" # AI Translated msgid "Saving to RAID is not supported." msgstr "RAID에 저장하는 것은 지원되지 않습니다." msgid "decompression failed" msgstr "압축 해제 실패" msgid "compression failed" msgstr "압축 실패" msgid "unexpected decompressed size" msgstr "예기치 못한 압축 해제 크기" msgid "CRC check failed" msgstr "CRC 확인 실패" msgid "unsupported central directory size" msgstr "지원되지 않는 중앙 디렉터리 크기" msgid "allocation failed" msgstr "할당 실패" msgid "file open failed" msgstr "파일 열기 실패" msgid "file create failed" msgstr "파일 생성 실패" msgid "file write failed" msgstr "파일 쓰기 실패" msgid "file read failed" msgstr "파일 읽기 실패" msgid "file close failed" msgstr "파일 닫기 실패" msgid "file seek failed" msgstr "파일 찾기 실패" msgid "file stat failed" msgstr "파일 통계 실패" msgid "invalid parameter" msgstr "잘못된 매개 변수" msgid "invalid filename" msgstr "잘못된 파일 이름" msgid "Buffer too small" msgstr "버퍼가 너무 작음" msgid "internal error" msgstr "내부 오류" msgid "file not found" msgstr "파일을 찾을 수 없습니다" msgid "Archive too large" msgstr "압축파일이 너무 큽니다" msgid "validation failed" msgstr "검증에 실패했습니다" msgid "write callback failed" msgstr "쓰기 호출 실패" #, boost-format msgid "%1% is too close to exclusion area. There may be collisions when printing." msgstr "%1% 이(가) 제외 영역에 너무 가깝습니다. 출력 시 충돌이 발생 할 수 있습니다." #, boost-format msgid "%1% is too close to others, and collisions may be caused." msgstr "%1% 이(가) 다른 객체와 너무 가까워 출력 시 충돌이 발생 할 수 있습니다." #, boost-format msgid "%1% is too tall, and collisions will be caused." msgstr "%1% 이(가) 너무 높아서 충돌이 출력 시 발생할 수 있습니다." msgid " is too close to exclusion area, there may be collisions when printing." msgstr " 이(가) 제외 영역에 너무 가깝습니다. 출력 시 충돌이 발생 할 수 있습니다." msgid " is too close to clumping detection area, there may be collisions when printing." msgstr " 뭉침 감지 영역에 너무 가까워 출력 시 충돌이 발생할 수 있습니다." msgid "Prime Tower" msgstr "프라임 타워" msgid " is too close to others, and collisions may be caused.\n" msgstr " 이(가) 다른 객체와 너무 가까워 출력 시 충돌이 발생 할 수 있습니다.\n" msgid " is too close to an exclusion area, and collisions will be caused.\n" msgstr " 이(가) 제외 영역에 너무 가깝습니다. 출력 시 충돌이 발생 할 수 있습니다.\n" msgid " is too close to clumping detection area, and collisions will be caused.\n" msgstr " 뭉침 감지 영역에 너무 가까워 충돌이 발생할 수 있습니다.\n" # AI Translated msgid "Selected nozzle temperatures are incompatible. Each filament's nozzle temperature must fall within the recommended nozzle temperature range of the other filaments. Otherwise, nozzle clogging or printer damage may occur." msgstr "선택한 노즐 온도가 서로 호환되지 않습니다. 각 필라멘트의 노즐 온도는 다른 필라멘트의 권장 노즐 온도 범위 안에 있어야 합니다. 그렇지 않으면 노즐 막힘이나 프린터 손상이 발생할 수 있습니다." # AI Translated msgid "Invalid recommended nozzle temperature range. The lower bound must be lower than the upper bound." msgstr "권장 노즐 온도 범위가 잘못되었습니다. 하한값은 상한값보다 낮아야 합니다." # AI Translated msgid "If you still want to print, you can enable the option in Preferences / Control / Slicing / Remove mixed temperature restriction." msgstr "그래도 출력하려면 기본 설정 / 제어 / 슬라이싱 / 혼합 온도 제한 해제 옵션을 활성화하십시오." msgid "No extrusions under current settings." msgstr "현재 설정에 압출기가 없습니다." msgid "Smooth mode of timelapse is not supported when \"by object\" sequence is enabled." msgstr "타임랩스의 유연 모드는 \"객체별\" 출력순서가 활성화된 경우 지원되지 않습니다." msgid "Clumping detection is not supported when \"by object\" sequence is enabled." msgstr "\"객체별\" 시퀀스가 활성화된 경우 뭉침 감지가 지원되지 않습니다." # AI Translated msgid "Enabling both precise Z height and the prime tower may cause slicing errors." msgstr "정밀 Z 높이와 프라임 타워를 함께 활성화하면 슬라이싱 오류가 발생할 수 있습니다." # AI Translated msgid "A prime tower is required for clumping detection; otherwise, there may be flaws on the model." msgstr "뭉침 감지에는 프라임 타워가 필요합니다. 그렇지 않으면 모델에 결함이 생길 수 있습니다." msgid "Please select \"By object\" print sequence to print multiple objects in spiral vase mode." msgstr "나선형 꽃병 모드에서 여러 객체를 출력하려면 \"객체별\" 출력 순서를 선택하세요." msgid "Spiral (vase) mode does not work when an object contains more than one material." msgstr "객체에 둘 이상의 재료가 포함된 경우 나선형 꽃병 모드가 작동하지 않습니다." #, boost-format msgid "While the object %1% itself fits the build volume, it exceeds the maximum build volume height because of material shrinkage compensation." msgstr "객체 %1% 자체는 빌드 볼륨에 맞지만, 머티리얼 수축 보정 때문에 최대 빌드 볼륨 높이를 초과합니다." #, boost-format msgid "The object %1% exceeds the maximum build volume height." msgstr "%1% 객체가 최대 빌드 부피 높이를 초과합니다." #, boost-format msgid "While the object %1% itself fits the build volume, its last layer exceeds the maximum build volume height." msgstr "%1% 객체 자체가 빌드 부피에 맞지만 마지막 레이어가 최대 빌드 부피 높이를 초과합니다." msgid "You might want to reduce the size of your model or change current print settings and retry." msgstr "모델 크기를 줄이거나 현재 출력 설정을 변경하고 다시 시도할 수 있습니다." msgid "Variable layer height is not supported with Organic supports." msgstr "유기체 서포트에서는 가변 레이어 높이가 지원되지 않습니다." msgid "Different nozzle diameters and different filament diameters may not work well when the prime tower is enabled. It's very experimental, so please proceed with caution." msgstr "프라임 타워를 활성화하면 노즐 직경과 필라멘트 직경이 다르면 제대로 작동하지 않을 수 있습니다. 매우 실험적인 기능이므로 주의해서 사용하시기 바랍니다." msgid "The Wipe Tower is currently only supported with the relative extruder addressing (use_relative_e_distances=1)." msgstr "프라임 타워는 현재 관련 압출기에서만 지원됩니다.주소 지정(use_relative_e_distances=1)." msgid "Ooze prevention is only supported with the wipe tower when 'single_extruder_multi_material' is off." msgstr "흘러내림 방지는 'single_extruder_multi_material'이 꺼져 있을 때만 와이프 타워에서 지원됩니다." msgid "The prime tower is currently only supported for the Marlin, RepRap/Sprinter, RepRapFirmware and Repetier G-code flavors." msgstr "프라임 타워는 현재 Marlin, RepRap/Sprinter, RepRapFirmware 및 Repetier Gcode 유형에서만 지원됩니다." msgid "A prime tower is not supported in “By object” print." msgstr "프라임 타워는 \"객체별\" 출력에서 지원되지 않습니다." msgid "A prime tower is not supported when adaptive layer height is on. It requires that all objects have the same layer height." msgstr "적응형 레이어 높이가 켜져 있으면 프라임 타워가 지원되지 않습니다. 모든 객체의 레이어 높이가 동일해야 합니다." msgid "A prime tower requires any “support gap” to be a multiple of layer height." msgstr "프라임 타워는 \"서포트 간격\"이 레이어 높이의 배수여야 합니다" msgid "A prime tower requires that all objects have the same layer height." msgstr "프라임 타워는 모든 객체의 레이어 높이가 동일해야 합니다" msgid "A prime tower requires that all objects are printed over the same number of raft layers." msgstr "프라임 타워는 모든 객체가 동일한 수의 라프트 레이어 위에 출력되어야 합니다" msgid "The prime tower is only supported for multiple objects if they are printed with the same support_top_z_distance." msgstr "프라임 타워는 여러 오브젝트가 동일한 support_top_z_distance로 출력된 경우에만 지원됩니다" msgid "A prime tower requires that all objects are sliced with the same layer height." msgstr "프라임 타워는 모든 객체가 동일한 레이어 높이로 슬라이스되어야 합니다." msgid "The prime tower is only supported if all objects have the same variable layer height." msgstr "프라임 타워는 모든 객체의 가변 레이어 높이가 동일한 경우에만 지원됩니다" msgid "One or more object were assigned an extruder that the printer does not have." msgstr "하나 이상의 객체에 프린터에 없는 압출기가 할당되었습니다." msgid "Line width too small" msgstr "선 너비가 너무 작습니다" msgid "Line width too large" msgstr "선 너비가 너무 큽니다" msgid "Printing with multiple extruders of differing nozzle diameters. If support is to be printed with the current filament (support_filament == 0 or support_interface_filament == 0), all nozzles have to be of the same diameter." msgstr "노즐 직경이 다른 여러 개의 압출기로 출력. 현재 필라멘트를 사용하여 서포트를 출하려면(support_filament == 0 또는 support_interface_ilament == 0) 모든 노즐의 직경이 같아야 합니다." msgid "A prime tower requires that support has the same layer height as the object." msgstr "프라임 타워는 서포트가 객체와 동일한 레이어 높이를 갖도록 요구합니다." # AI Translated msgid "For Organic supports, two walls are supported only with the Hollow/Default base pattern." msgstr "유기적 서포트에서는 속 빈/기본 베이스 패턴에서만 벽 2개가 지원됩니다." # AI Translated msgid "The Lightning base pattern is not supported by this support type; Rectilinear will be used instead." msgstr "이 서포트 유형은 번개 베이스 패턴을 지원하지 않으므로 대신 직선 패턴이 사용됩니다." msgid "Organic support tree tip diameter must not be smaller than support material extrusion width." msgstr "유기체 서포트 트리 끝 직경은 서포트 재료 압출 너비보다 작아서는 안 됩니다." msgid "Organic support branch diameter must not be smaller than 2x support material extrusion width." msgstr "유기체 서포트 가지 직경은 서포트 재료 압출 너비의 2배보다 작아서는 안 됩니다." msgid "Organic support branch diameter must not be smaller than support tree tip diameter." msgstr "유기체 서포트 가지 직경은 서포트 트리 끝 직경보다 작을 수 없습니다." # AI Translated msgid "The Hollow base pattern is not supported by this support type; Rectilinear will be used instead." msgstr "이 서포트 유형은 속 빈 베이스 패턴을 지원하지 않으므로 대신 직선 패턴이 사용됩니다." msgid "Support enforcers are used but support is not enabled. Please enable support." msgstr "서포트 강제기가 사용되지만 서포트가 활성화되지 않습니다. 서포트를 활성화하세요." msgid "Layer height cannot exceed nozzle diameter." msgstr "레이어 높이는 노즐 직경을 초과할 수 없습니다" # AI Translated msgid "Bridge line width must not exceed nozzle diameter" msgstr "브릿지 선 너비는 노즐 직경을 초과할 수 없습니다" # AI Translated msgid "\"G92 E0\" was found in before_layer_change_gcode, but the G or E are not uppercase. Please change them to the exact uppercase \"G92 E0\"." msgstr "before_layer_change_gcode에서 \"G92 E0\"을 찾았지만 G 또는 E가 대문자가 아닙니다. 정확히 대문자 \"G92 E0\"으로 변경하십시오." # AI Translated msgid "\"G92 E0\" was found in layer_change_gcode, but the G or E are not uppercase. Please change them to the exact uppercase \"G92 E0\"." msgstr "layer_change_gcode에서 \"G92 E0\"을 찾았지만 G 또는 E가 대문자가 아닙니다. 정확히 대문자 \"G92 E0\"으로 변경하십시오." msgid "Relative extruder addressing requires resetting the extruder position at each layer to prevent loss of floating point accuracy. Add \"G92 E0\" to layer_gcode." msgstr "상대 압출 모드에서는 부동 소수점 정확도를 위해 각 레이어에서 압출기 위치를 재설정해야 합니다. layer_gcode에 \"G92 E0\"을 추가하세요." # AI Translated msgid "\"G92 E0\" was found in before_layer_change_gcode, which is incompatible with absolute extruder addressing." msgstr "before_layer_change_gcode에서 \"G92 E0\"을 찾았습니다. 이는 절대 압출기 주소 지정 방식과 호환되지 않습니다." # AI Translated msgid "\"G92 E0\" was found in layer_change_gcode, which is incompatible with absolute extruder addressing." msgstr "layer_change_gcode에서 \"G92 E0\"을 찾았습니다. 이는 절대 압출기 주소 지정 방식과 호환되지 않습니다." #, c-format, boost-format msgid "Plate %d: %s does not support filament %s" msgstr "%d: %s 플레이트는 %s 필라멘트를 지원하지 않습니다" msgid "Setting the jerk speed too low could lead to artifacts on curved surfaces" msgstr "저크 속도를 너무 낮게 설정하면 곡면에 아티팩트가 생길 수 있습니다" msgid "" "The jerk setting exceeds the printer's maximum jerk (machine_max_jerk_x/machine_max_jerk_y).\n" "Orca will automatically cap the jerk speed to ensure it doesn't surpass the printer's capabilities.\n" "You can adjust the maximum jerk setting in your printer's configuration to get higher speeds." msgstr "" "저크 설정이 프린터의 최대 저크(machine_max_jerk_x/machine_max_jerk_y)를 초과합니다.\n" "Orca는 저크 속도를 자동으로 제한하여 프린터 성능을 초과하지 않도록 합니다.\n" "더 빠른 속도를 얻으려면 프린터 구성에서 최대 저크 설정을 조정할 수 있습니다." # AI Translated msgid "" "Junction deviation setting exceeds the printer's maximum value (machine_max_junction_deviation).\n" "Orca will automatically cap the junction deviation to ensure it doesn't surpass the printer's capabilities.\n" "You can adjust the machine_max_junction_deviation value in your printer's configuration to get higher limits." msgstr "" "Junction Deviation 설정이 프린터의 최대값(machine_max_junction_deviation)을 초과합니다.\n" "Orca는 프린터의 성능을 넘지 않도록 Junction Deviation을 자동으로 제한합니다.\n" "더 높은 한계값을 사용하려면 프린터 구성에서 machine_max_junction_deviation 값을 조정하십시오." msgid "" "The acceleration setting exceeds the printer's maximum acceleration (machine_max_acceleration_extruding).\n" "Orca will automatically cap the acceleration speed to ensure it doesn't surpass the printer's capabilities.\n" "You can adjust the machine_max_acceleration_extruding value in your printer's configuration to get higher speeds." msgstr "" "가속 설정이 프린터의 최대 가속(machine_max_acceleration_extruding)을 초과합니다.\n" "Orca는 프린터의 성능을 초과하지 않도록 가속 속도를 자동으로 제한합니다.\n" "더 빠른 속도를 얻으려면 프린터 구성에서 machine_max_acceleration_extruding 값을 조정할 수 있습니다." msgid "" "The travel acceleration setting exceeds the printer's maximum travel acceleration (machine_max_acceleration_travel).\n" "Orca will automatically cap the travel acceleration speed to ensure it doesn't surpass the printer's capabilities.\n" "You can adjust the machine_max_acceleration_travel value in your printer's configuration to get higher speeds." msgstr "" "이동 가속도 설정이 프린터의 최대 이동 가속도(machine_max_acceleration_travel)를 초과합니다.\n" "Orca는 이동 가속 속도를 자동으로 제한하여 프린터의 성능을 초과하지 않도록 합니다.\n" "더 빠른 속도를 얻으려면 프린터 구성에서 machine_max_acceleration_travel 값을 조정할 수 있습니다." # AI Translated msgid "The precise wall option will be ignored for outer-inner or inner-outer-inner wall sequences." msgstr "정밀 벽 옵션은 외벽-내벽 또는 내벽-외벽-내벽 순서에서는 무시됩니다." # AI Translated msgid "The Adaptive Pressure Advance model for one or more extruders may contain invalid values." msgstr "하나 이상의 압출기에 대한 적응형 PA 모델에 잘못된 값이 포함되어 있을 수 있습니다." # AI Translated msgid "Filament shrinkage will not be used because filament shrinkage for the used filaments does not match." msgstr "사용된 필라멘트들의 수축률이 서로 일치하지 않으므로 필라멘트 수축 보정이 적용되지 않습니다." msgid "Generating skirt & brim" msgstr "스커트 & 브림 생성 중" # AI Translated msgid "" "Per-object skirts cannot fit between the objects in By object print sequence.\n" "\n" "Move the objects farther apart, reduce brim/skirt size, switch Skirt type to Combined, or switch Print sequence to By layer." msgstr "" "객체별 출력 순서에서는 객체 사이에 객체별 스커트를 배치할 수 없습니다.\n" "\n" "객체 사이를 더 벌리거나, 브림/스커트 크기를 줄이거나, 스커트 유형을 통합으로 변경하거나, 출력 순서를 레이어별로 변경하십시오." msgid "Exporting G-code" msgstr "Gcode 내보내는 중" msgid "Generating G-code" msgstr "Gcode 생성 중" # AI Translated msgid "Processing of the filename_format template failed." msgstr "filename_format 템플릿 처리에 실패했습니다." msgid "Printer technology" msgstr "프린터 기술" msgid "Printable area" msgstr "출력 가능 영역" msgid "Extruder printable area" msgstr "압출기 출력 가능 영역" # AI Translated msgid "Support parallel printheads" msgstr "병렬 프린트헤드 지원" # AI Translated msgid "Enable printer settings for machines that can use multiple printheads in parallel." msgstr "여러 프린트헤드를 병렬로 사용할 수 있는 장비를 위한 프린터 설정을 활성화합니다." # AI Translated msgid "Parallel printheads count" msgstr "병렬 프린트헤드 개수" # AI Translated msgid "Set the number of parallel printheads for machines like OrangeStorm Giga printer." msgstr "OrangeStorm Giga 프린터와 같은 장비의 병렬 프린트헤드 개수를 설정합니다." # AI Translated msgid "Parallel printheads bed exclude areas" msgstr "병렬 프린트헤드 베드 제외 영역" # AI Translated msgid "Ordered list of bed exclude areas by parallel printhead count. Item 1 applies to one printhead, item 2 to two printheads, and so on. Leave an item empty for no excluded area." msgstr "병렬 프린트헤드 개수별 베드 제외 영역을 순서대로 나열한 목록입니다. 항목 1은 프린트헤드 1개, 항목 2는 프린트헤드 2개에 적용되며 이후도 같습니다. 제외 영역이 없으면 항목을 비워 두십시오." msgid "Excluded bed area" msgstr "베드 제외 구역" msgid "Unprintable area in XY plane. For example, X1 Series printers use the front left corner to cut filament during filament change. The area is expressed as polygon by points in following format: \"XxY, XxY, ...\"" msgstr "XY 평면에서 출력할 수 없는 영역입니다. 예를 들어, X1 시리즈 프린터는 필라멘트 교체 중에 필라멘트를 절단하기 위해 전면 왼쪽 모서리를 사용합니다. 영역은 \"XxY, XxY...\" 형식의 점으로 다각형으로 표시됩니다" msgid "Bed custom texture" msgstr "사용자 정의 베드 텍스처" msgid "Bed custom model" msgstr "사용자 정의 베드 모델" msgid "Elephant foot compensation" msgstr "코끼리 발 보정" msgid "This shrinks the first layer on the build plate to compensate for elephant foot effect." msgstr "코끼리 발 효과를 보정하기 위해 빌드 플레이트에 닿는 첫 레이어를 축소합니다" msgid "Elephant foot compensation layers" msgstr "코끼리 발 보정 레이어" msgid "The number of layers on which the elephant foot compensation will be active. The first layer will be shrunk by the elephant foot compensation value, then the next layers will be linearly shrunk less, up to the layer indicated by this value." msgstr "코끼리 발 보정을 적용할 레이어의 수입니다. 첫 번째 레이어는 코끼리 발 보정 값만큼 축소되고, 다음 레이어부터 이 값으로 표시된 레이어까지 선형적으로 덜 축소됩니다." # AI Translated msgid "Elephant foot layers density" msgstr "코끼리 발 레이어 밀도" # AI Translated msgid "" "Density of internal solid infill for Elephant foot layers compensation.\n" "The initial value for the second layer is set.\n" "Subsequent layers become linearly denser by the height specified in elefant_foot_compensation_layers." msgstr "" "코끼리 발 레이어 보정을 위한 꽉찬 내부 채우기의 밀도입니다.\n" "두 번째 레이어의 초기값이 설정됩니다.\n" "이후 레이어는 elefant_foot_compensation_layers에 지정된 높이에 따라 선형적으로 조밀해집니다." msgid "This is the height for each layer. Smaller layer heights give greater accuracy but longer printing time." msgstr "각 레이어에 대한 슬라이스 높이입니다. 레이어 높이가 작다는 것은 더 정확하고 더 많은 출력 시간을 의미합니다" msgid "Printable height" msgstr "출력 가능 높이" # AI Translated msgid "This is the maximum printable height which is limited by the height of the build area." msgstr "빌드 영역의 높이에 의해 제한되는 최대 출력 가능 높이입니다." msgid "Extruder printable height" msgstr "압출기 출력 가능 높이" # AI Translated msgid "Maximum printable height of this extruder which is limited by mechanism of printer." msgstr "프린터 구조에 의해 제한되는 이 압출기의 최대 출력 가능 높이입니다." msgid "Preferred orientation" msgstr "선호하는 방향" msgid "Automatically orient STL files on the Z axis upon initial import." msgstr "최초 임포트 시 Z축에서 자동으로 스톨 방향 지정" msgid "Printer preset names" msgstr "프린터 사전 설정 이름" msgid "Use 3rd-party print host" msgstr "타사 출력 호스트 사용" msgid "Allow controlling BambuLab's printer through 3rd party print hosts." msgstr "타사 프린트 호스트를 통해 뱀부랩의 프린터 제어 허용" # AI Translated msgid "Use 3MF instead of G-code" msgstr "G-code 대신 3MF 사용" # AI Translated msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file." msgstr "프린터가 출력 작업으로 3MF 파일을 허용하는 경우 이 옵션을 활성화하십시오. 활성화하면 Orca Slicer가 슬라이스된 파일을 일반 .gcode 파일 대신 .gcode.3mf로 전송합니다." # AI Translated msgid "Printer Agent" msgstr "프린터 에이전트" # AI Translated msgid "Select the network agent implementation for printer communication." msgstr "프린터 통신에 사용할 네트워크 에이전트 구현을 선택합니다." msgid "Hostname, IP or URL" msgstr "호스트 이름, IP 또는 URL" msgid "Orca Slicer can upload G-code files to a printer host. This field should contain the hostname, IP address or URL of the printer host instance. Print host behind HAProxy with basic auth enabled can be accessed by putting the user name and password into the URL in the following format: https://username:password@your-octopi-address/" msgstr "Orca Slicer은 Gcode 파일을 프린터 호스트에 업로드할 수 있습니다. 이 필드에는 프린터 호스트 인스턴스의 호스트 이름, IP 주소 또는 URL이 포함되어야 합니다. 기본 인증이 활성화된 HAProxy 뒤의 출력 호스트는 https://username:password@your-octopi-address/ 형식의 URL에 사용자 이름과 암호를 입력하여 액세스할 수 있습니다" msgid "Device UI" msgstr "장치 UI" msgid "Specify the URL of your device user interface if it's not same as print_host." msgstr "Print_host와 동일하지 않은 경우 장치 사용자 인터페이스의 URL을 지정하세요" msgid "API Key / Password" msgstr "API 키 / 비밀번호" msgid "Orca Slicer can upload G-code files to a printer host. This field should contain the API Key or the password required for authentication." msgstr "Orca Slicer은 Gcode 파일을 프린터 호스트에 업로드할 수 있습니다. 이 필드에는 인증에 필요한 API 키 또는 비밀번호가 포함되어야 합니다." # AI Translated msgid "Serial Number" msgstr "일련번호" # AI Translated msgid "Flashforge local API requires the printer serial number." msgstr "Flashforge 로컬 API에는 프린터 일련번호가 필요합니다." msgid "Name of the printer." msgstr "프린터 이름" msgid "HTTPS CA File" msgstr "HTTPS CA 파일" msgid "Custom CA certificate file can be specified for HTTPS OctoPrint connections, in crt/pem format. If left blank, the default OS CA certificate repository is used." msgstr "사용자 정의 CA 인증서 파일은 crt/pem 형식의 HTTPS OctoPrint 연결에 대해 지정할 수 있습니다. 비워 두면 기본 OS CA 인증서 저장소가 사용됩니다." msgid "User" msgstr "사용자" msgid "Password" msgstr "비밀번호" msgid "Ignore HTTPS certificate revocation checks" msgstr "HTTPS 인증서 해지 검사 무시" msgid "Ignore HTTPS certificate revocation checks in the case of missing or offline distribution points. One may want to enable this option for self signed certificates if connection fails." msgstr "배포 지점이 없거나 오프라인인 경우 HTTPS 인증서 해지 검사를 무시합니다. 연결이 실패할 경우 자체 서명된 인증서에 대해 이 옵션을 사용할 수 있습니다." msgid "Names of presets related to the physical printer." msgstr "물리적 프린터 관련 사전 설정 이름" msgid "Authorization Type" msgstr "승인 유형" msgid "API key" msgstr "API 키" msgid "HTTP digest" msgstr "HTTP 다이제스트" # AI Translated msgid "Configuration for the plugin capabilities this preset uses, overriding the global Capabilities configuration. Stored as a raw JSON array and edited through the dialog behind the button, never typed in directly." msgstr "이 사전 설정이 사용하는 플러그인 기능의 구성으로, 전역 기능 구성을 재정의합니다. 원시 JSON 배열로 저장되며 버튼 뒤의 대화 상자를 통해 편집하고 직접 입력하지 않습니다." msgid "Avoid crossing walls" msgstr "벽 가로지름 방지" msgid "This detours to avoid traveling across walls, which may cause blobs on the surface." msgstr "벽을 가로질러 이동하지 않고 우회하여 표면에 방울 발생을 방지합니다" msgid "Avoid crossing walls - Max detour length" msgstr "벽 가로지름 방지 - 최대 우회 길이" msgid "Maximum detour distance for avoiding crossing wall: The printer won't detour if the detour distance is larger than this value. Detour length could be specified either as an absolute value or as percentage (for example 50%) of a direct travel path. A value of 0 will disable this." msgstr "벽 가로지름 방지를 위한 최대 우회 거리. 우회 거리가 이 값보다 크면 우회하지 않습니다. 우회 길이는 절대값 또는 직접 이동 경로의 백분율(예: 50%)로 지정할 수 있습니다. 값 0으로 비활성화할 수 있습니다" msgid "mm or %" msgstr "mm 또는 %" msgid "Other layers" msgstr "다른 레이어" # AI Translated msgid "Bed temperature for layers except the initial one. A value of 0 means the filament does not support printing on the Cool Plate SuperTack." msgstr "초기 레이어를 제외한 레이어의 베드 온도입니다. 값이 0이면 해당 필라멘트가 쿨 플레이트 슈퍼택에서의 출력을 지원하지 않음을 의미합니다." msgid "This is the bed temperature for layers except for the first one. A value of 0 means the filament does not support printing on the Cool Plate." msgstr "초기 레이어를 제외한 레이어의 베드 온도. 값 0은 필라멘트가 쿨 플레이트 출력을 지원하지 않음을 의미합니다." msgid "This is the bed temperature for layers except for the first one. A value of 0 means the filament does not support printing on the Textured Cool Plate." msgstr "초기 레이어를 제외한 레이어의 베드 온도입니다. 값 0은 필라멘트가 텍스처드 쿨 플레이트에서 출력를 지원하지 않음을 의미합니다." msgid "This is the bed temperature for layers except for the first one. A value of 0 means the filament does not support printing on the Engineering Plate." msgstr "초기 레이어를 제외한 레이어의 베드 온도. 값 0은 필라멘트가 엔지니어링 플레이트 출력을 지원하지 않음을 의미합니다." msgid "This is the bed temperature for layers except for the first one. A value of 0 means the filament does not support printing on the High Temp Plate." msgstr "초기 레이어를 제외한 레이어의 베드 온도. 값 0은 필라멘트가 고온 플레이트 출력을 지원하지 않음을 의미합니다." msgid "This is the bed temperature for layers except for the first one. A value of 0 means the filament does not support printing on the Textured PEI Plate." msgstr "초기 레이어를 제외한 레이어의 베드 온도. 값 0은 필라멘트가 텍스처 PEI 플레이트 출력을 지원하지 않음을 의미합니다." msgid "First layer" msgstr "초기 레이어" msgid "First layer bed temperature" msgstr "초기 레이어 베드 온도" msgid "This is the bed temperature of the first layer. A value of 0 means the filament does not support printing on the Cool Plate SuperTack." msgstr "초기 레이어의 베드 온도입니다. 값 0은 필라멘트가 쿨 플레이트(슈퍼택)에 출력할 수 없음을 의미합니다." msgid "This is the bed temperature of the first layer. A value of 0 means the filament does not support printing on the Cool Plate." msgstr "초기 레이어의 베드 온도. 값 0은 필라멘트가 쿨 플레이트 출력을 지원하지 않음을 의미합니다." msgid "This is the bed temperature of the first layer. A value of 0 means the filament does not support printing on the Textured Cool Plate." msgstr "초기 레이어의 베드 온도입니다. 값 0은 필라멘트가 텍스처드 쿨 플레이트에 출력할 수 없음을 의미합니다." # AI Translated msgid "This is the bed temperature of the first layer. A value of 0 means the filament does not support printing on the Engineering Plate." msgstr "초기 레이어의 베드 온도. 값 0은 필라멘트가 엔지니어링 플레이트 출력을 지원하지 않음을 의미합니다." msgid "This is the bed temperature of the first layer. A value of 0 means the filament does not support printing on the High Temp Plate." msgstr "초기 레이어의 베드 온도입니다. 값 0은 필라멘트가 고온 플레이트 출력을 지원하지 않음을 의미합니다." msgid "This is the bed temperature of the first layer. A value of 0 means the filament does not support printing on the Textured PEI Plate." msgstr "초기 레이어의 베드 온도. 값 0은 필라멘트가 텍스처 PEI 플레이트 출력을 지원하지 않음을 의미합니다." msgid "Plate types supported by the printer" msgstr "프린터가 지원하는 베드 유형" # AI Translated msgid "Default bed type" msgstr "기본 베드 유형" # AI Translated msgid "Default bed type for the printer (supports both numeric and string format)." msgstr "프린터의 기본 베드 유형입니다(숫자 및 문자열 형식 모두 지원)." msgid "First layer print sequence" msgstr "첫 레이어 출력 순서" msgid "Other layers print sequence" msgstr "다른 레이어 출력 순서" msgid "The number of other layers print sequence" msgstr "다른 레이어 수 출력 순서" msgid "Other layers filament sequence" msgstr "다른 층 필라멘트 순서" msgid "This G-code is inserted at every layer change before the Z lift." msgstr "이 Gcode는 Z좌표를 올리기 전 모든 레이어 변경에 삽입됩니다" msgid "Bottom shell layers" msgstr "하단 쉘 레이어" msgid "This is the number of solid layers of bottom shell, including the bottom surface layer. When the thickness calculated by this value is thinner than bottom shell thickness, the bottom shell layers will be increased." msgstr "하단 표면을 포함한 하단 쉘의 꽉찬 레이어 수입니다. 이 값으로 계산한 두께가 하단 쉘 두께보다 얇으면 하단 쉘 레이어가 증가합니다" msgid "Bottom shell thickness" msgstr "하단 쉘 두께" msgid "The number of bottom solid layers is increased when slicing if the thickness calculated by bottom shell layers is thinner than this value. This can avoid having too thin a shell when layer height is small. 0 means that this setting is disabled and the thickness of the bottom shell is determined simply by the number of bottom shell layers." msgstr "하단 쉘 레이어로 계산된 두께가 이 값보다 얇은 경우 슬라이싱할 때 하단 꽉찬 레이어의 수가 증가합니다. 이렇게 하면 레이어 높이가 작을 때 쉘이 너무 얇아지는 것을 방지할 수 있습니다. 0은 이 설정이 비활성화되고 하단 쉘의 두께가 절대적으로 하단 쉘 레이어에 의해 결정됨을 의미합니다" msgid "Apply gap fill" msgstr "간격 채우기 적용" msgid "" "Enables gap fill for the selected solid surfaces. The minimum gap length that will be filled can be controlled from the filter out tiny gaps option below.\n" "\n" "Options:\n" "1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces for maximum strength\n" "2. Top and Bottom surfaces: Applies gap fill to top and bottom surfaces only, balancing print speed, reducing potential over extrusion in the solid infill and making sure the top and bottom surfaces have no pinhole gaps\n" "3. Nowhere: Disables gap fill for all solid infill areas\n" "\n" "Note that if using the classic perimeter generator, gap fill may also be generated between perimeters, if a full width line cannot fit between them. That perimeter gap fill is not controlled by this setting.\n" "\n" "If you would like all gap fill, including the classic perimeter generated one, removed, set the filter out tiny gaps value to a large number, like 999999.\n" "\n" "However this is not advised, as gap fill between perimeters is contributing to the model's strength. For models where excessive gap fill is generated between perimeters, a better option would be to switch to the arachne wall generator and use this option to control whether the cosmetic top and bottom surface gap fill is generated." msgstr "" "선택한 솔리드 서페이스에 갭 채우기를 활성화합니다. 채울 최소 간격 길이는 아래의 작은 간격 필터링 옵션에서 제어할 수 있습니다.\n" "\n" "옵션:\n" "1. 모든곳: 최대 강도를 위해 상단, 하단 및 내부 솔리드 표면에 갭 채우기를 적용합니다\n" "2. 상단 및 하단 표면: 상단 및 하단 표면에만 갭 채우기를 적용하여 프린트 속도 균형을 맞추고, 솔리드 인필의 돌출 가능성을 줄이며, 상단 및 하단 표면에 핀홀 틈이 없도록 합니다\n" "3. 미사용: 모든 솔리드 인필 영역에 대해 갭 채우기를 사용하지않습니다.\n" "\n" "기존 경계 생성기를 사용하는 경우 경계 사이에 전체 너비 선이 맞지 않는 경우 경계 사이에 갭 채우기가 생성될 수도 있습니다. 해당 경계선 간격 채우기는 이 설정으로 제어되지 않습니다.\n" "\n" "기존 경계선 생성기를 포함한 모든 간격 채우기를 제거하려면 필터에서 작은 간격 값을 999999와 같이 큰 숫자로 설정하세요.\n" "\n" "그러나 경계선 사이의 간격 채우기는 모델의 강도에 영향을 미치므로 권장되지 않습니다. 경계선 사이에 과도한 갭 채우기가 생성되는 모델의 경우 아라크네 벽 생성기로 전환하고 이 옵션을 사용하여 미려한 상단 및 하단 표면 갭 채우기 생성 여부를 제어하는 것이 더 나은 옵션이 될 수 있습니다" msgid "Everywhere" msgstr "모든곳" msgid "Top and bottom surfaces" msgstr "상단 및 하단 표면" msgid "Nowhere" msgstr "미사용" msgid "Force cooling for overhangs and bridges" msgstr "오버행 및 브릿지에 대한 강제 냉각" msgid "Enable this option to allow adjustment of the part cooling fan speed for specifically for overhangs, internal and external bridges. Setting the fan speed specifically for these features can improve overall print quality and reduce warping." msgstr "이 옵션을 활성화하면 오버행, 내부 및 외부 브릿지에 대한 부품 냉각 팬 속도를 조정할 수 있습니다. 이러한 기능에 맞게 팬 속도를 설정하면 전반적인 출력 품질을 개선하고 뒤틀림을 줄일 수 있습니다." msgid "Overhangs and external bridges fan speed" msgstr "오버행 및 외부 브릿지 팬 속도" msgid "" "Use this part cooling fan speed when printing bridges or overhang walls with an overhang threshold that exceeds the value set in the 'Overhangs cooling threshold' parameter above. Increasing the cooling specifically for overhangs and bridges can improve the overall print quality of these features.\n" "\n" "Please note, this fan speed is clamped on the lower end by the minimum fan speed threshold set above. It is also adjusted upwards up to the maximum fan speed threshold when the minimum layer time threshold is not met." msgstr "" "오버행 임계값이 위의 '오버행 냉각 임계값' 파라미터에 설정된 값을 초과하는 브릿지 또는 오버행 벽을 출력할 때 이 부품 냉각 팬 속도를 사용합니다. 오버행 및 브릿지에 대한 냉각을 강화하면 이러한 기능의 전반적인 출력 품질이 향상될 수 있습니다.\n" "\n" "이 팬 속도는 위에 설정된 최소 팬 속도 임계값에 의해 하단에 고정된다는 점에 유의하세요. 또한 최소 레이어 시간 임계값이 충족되지 않으면 최대 팬 속도 임계값까지 상향 조정됩니다." msgid "Overhang cooling activation threshold" msgstr "오버행 냉각 활성화 임계값" #, no-c-format, no-boost-format msgid "When the overhang exceeds this specified threshold, force the cooling fan to run at the 'Overhang Fan Speed' set below. This threshold is expressed as a percentage, indicating the portion of each line's width that is unsupported by the layer beneath it. Setting this value to 0% forces the cooling fan to run for all outer walls, regardless of the overhang degree." msgstr "오버행이 지정된 임계값을 초과하면 아래에 설정된 '오버행 팬 속도'로 냉각 팬이 강제로 작동합니다. 이 임계값은 백분율로 표시되며, 각 선 너비에서 그 아래 레이어가 지원하지 않는 부분을 나타냅니다. 이 값을 0%로 설정하면 돌출 정도에 관계없이 모든 외벽에 대해 냉각 팬이 강제로 작동합니다." msgid "External bridge infill direction" msgstr "외부 브릿지 채우기 방향" # AI Translated #, no-c-format, no-boost-format msgid "" "External Bridging angle override.\n" "If left to zero, the bridging angle will be calculated automatically for each specific bridge.\n" "Otherwise the provided angle will be used according to:\n" " - The absolute coordinates\n" " - The absolute coordinates + Model rotation: If Align directions to model is enabled\n" " - The optimal automatic angle + this value: If 'Relative Bridge Angle' is enabled\n" "\n" "Use 180° for zero absolute angle." msgstr "" "외부 브릿지 각도 재정의입니다.\n" "0으로 두면 각 브릿지마다 브릿지 각도가 자동으로 계산됩니다.\n" "0이 아니면 지정한 각도가 다음 기준에 따라 사용됩니다:\n" " - 절대 좌표\n" " - 절대 좌표 + 모델 회전: '방향을 모델에 정렬'이 활성화된 경우\n" " - 최적의 자동 각도 + 이 값: '상대 브릿지 각도'가 활성화된 경우\n" "\n" "절대 각도 0을 사용하려면 180°를 입력하십시오." msgid "Internal bridge infill direction" msgstr "내부 브릿지 채우기 방향" # AI Translated msgid "" "Internal Bridging angle override.\n" "If left to zero, the bridging angle will be calculated automatically for each specific bridge.\n" "Otherwise the provided angle will be used according to:\n" " - The absolute coordinates\n" " - The absolute coordinates + Model rotation: If Align directions to model is enabled\n" " - The optimal automatic angle + this value: If 'Relative Bridge Angle' is enabled\n" "\n" "Use 180° for zero absolute angle." msgstr "" "내부 브릿지 각도 재정의입니다.\n" "0으로 두면 각 브릿지마다 브릿지 각도가 자동으로 계산됩니다.\n" "0이 아니면 지정한 각도가 다음 기준에 따라 사용됩니다:\n" " - 절대 좌표\n" " - 절대 좌표 + 모델 회전: '방향을 모델에 정렬'이 활성화된 경우\n" " - 최적의 자동 각도 + 이 값: '상대 브릿지 각도'가 활성화된 경우\n" "\n" "절대 각도 0을 사용하려면 180°를 입력하십시오." # AI Translated msgid "Relative bridge angle" msgstr "상대 브릿지 각도" # AI Translated msgid "When enabled, the bridge angle values are added to the automatically calculated bridge direction instead of overriding it." msgstr "활성화하면 브릿지 각도 값이 자동으로 계산된 브릿지 방향을 대체하지 않고 그 값에 더해집니다." msgid "External bridge density" msgstr "외부 브릿지 밀도" # AI Translated msgid "" "Controls the density (spacing) of external bridge lines.\n" "Theoretically, 100% means a solid bridge, but due to the tendency of bridge extrusions to sag, 100% may not be sufficient.\n" "\n" "- Higher than 100% density (Recommended Max 125%):\n" " - Pros: Produces smoother bridge surfaces, as overlapping lines provide additional support during printing.\n" " - Cons: Can cause overextrusion, which may reduce lower and upper surface quality and increase the risk of warping.\n" "\n" "- Lower than 100% density (Min 10%):\n" " - Pros: Can create a string-like first layer. Faster and with better cooling because there is more space for air to circulate around the extruded bridge.\n" " - Cons: May lead to sagging and poorer surface finish." msgstr "" "외부 브릿지 선의 밀도(간격)를 제어합니다.\n" "이론적으로 100%는 꽉 찬 브릿지를 의미하지만, 브릿지 압출선이 처지는 경향이 있어 100%로도 충분하지 않을 수 있습니다.\n" "\n" "- 100%보다 높은 밀도(권장 최대 125%):\n" " - 장점: 선이 겹치면서 출력 중 추가 지지를 제공하므로 브릿지 표면이 더 매끄러워집니다.\n" " - 단점: 과압출이 발생하여 상하단 표면 품질이 저하되고 휨 위험이 커질 수 있습니다.\n" "\n" "- 100%보다 낮은 밀도(최소 10%):\n" " - 장점: 실 형태의 첫 레이어를 만들 수 있습니다. 압출된 브릿지 주위로 공기가 순환할 공간이 넓어져 더 빠르고 냉각도 잘 됩니다.\n" " - 단점: 처짐이 생기고 표면 마감이 나빠질 수 있습니다." msgid "Internal bridge density" msgstr "내부 브릿지 밀도" # AI Translated msgid "" "Controls the density (spacing) of internal bridge lines.\n" "Internal bridges act as intermediate support between sparse infill and top solid infill and can strongly affect top surface quality.\n" "\n" "- Higher than 100% density (Recommended Max 125%):\n" " - Pros: Improves internal bridge strength and support under top layers, reducing sagging and improving top-surface finish.\n" " - Cons: Increases material use and print time; excessive density may cause overextrusion and internal stresses.\n" "\n" "- Lower than 100% density (Min 10%):\n" " - Pros: Can reduce pillowing and improve cooling (more airflow through the bridge), and may speed up printing.\n" " - Cons: May reduce internal support, increasing the risk of sagging and top surface defects.\n" "\n" "This option works particularly well when combined with the second internal bridge over infill option to improve bridging further before solid infill is extruded." msgstr "" "내부 브릿지 선의 밀도(간격)를 제어합니다.\n" "내부 브릿지는 드문 채우기와 상단 꽉찬 채우기 사이에서 중간 지지 역할을 하며 상단 표면 품질에 큰 영향을 줄 수 있습니다.\n" "\n" "- 100%보다 높은 밀도(권장 최대 125%):\n" " - 장점: 내부 브릿지의 강도와 상단 레이어 아래의 지지력이 향상되어 처짐이 줄고 상단 표면 마감이 좋아집니다.\n" " - 단점: 재료 사용량과 출력 시간이 늘어나며, 밀도가 지나치면 과압출과 내부 응력이 생길 수 있습니다.\n" "\n" "- 100%보다 낮은 밀도(최소 10%):\n" " - 장점: 필로잉을 줄이고 브릿지를 통한 공기 흐름이 늘어 냉각이 개선되며 출력 속도가 빨라질 수 있습니다.\n" " - 단점: 내부 지지력이 줄어 처짐과 상단 표면 결함의 위험이 커질 수 있습니다.\n" "\n" "이 옵션은 꽉찬 채우기를 압출하기 전에 브릿지를 더욱 개선하는 '채우기 위 두 번째 내부 브릿지' 옵션과 함께 사용할 때 특히 효과적입니다." msgid "Bridge flow ratio" msgstr "브릿지 압출량 비율" # AI Translated msgid "" "This value governs the thickness of the external (visible) bridge layer.\n" "Values above 1.0: Increase the amount of material while maintaining line spacing. This can improve line contact and strength.\n" "Values below 1.0: Reduce the amount of material while adjusting line spacing to maintain contact. This can improve sagging.\n" "\n" "The actual bridge flow used is calculated by multiplying this value with the filament flow ratio, and if set, the object's flow ratio." msgstr "" "이 값은 외부(눈에 보이는) 브릿지 레이어의 두께를 결정합니다.\n" "1.0보다 큰 값: 선 간격을 유지하면서 재료 양을 늘립니다. 선의 접촉과 강도가 향상될 수 있습니다.\n" "1.0보다 작은 값: 접촉을 유지하도록 선 간격을 조정하면서 재료 양을 줄입니다. 처짐이 개선될 수 있습니다.\n" "\n" "실제 사용되는 브릿지 압출량은 이 값에 필라멘트 압출량 비율과, 설정된 경우 객체의 압출량 비율을 곱하여 계산됩니다." # AI Translated msgid "" "Line width of the Bridge. If expressed as a %, it will be computed over the nozzle diameter.\n" "Recommended to use with a higher Bridge density or Bridge flow ratio.\n" "\n" "The maximum value is 100% or the nozzle diameter.\n" "If set to 0, the line width will match the Internal solid infill width." msgstr "" "브릿지의 선 너비입니다. %로 입력 시 노즐 직경에 대한 비율로 계산됩니다.\n" "브릿지 밀도나 브릿지 압출량 비율을 높여 함께 사용하는 것이 좋습니다.\n" "\n" "최대값은 100% 또는 노즐 직경입니다.\n" "0으로 설정하면 선 너비가 꽉찬 내부 채우기 너비와 같아집니다." msgid "Internal bridge flow ratio" msgstr "내부 브릿지 압출량 비율" # AI Translated msgid "" "This value governs the thickness of the internal bridge layer. This is the first layer over sparse infill so increasing it may increase strength and upper layer quality.\n" "Values above 1.0: Increase the amount of material while maintaining line spacing. This can improve line contact and strength.\n" "Values below 1.0: Reduce the amount of material while adjusting line spacing to maintain contact. This can improve sagging.\n" "\n" "The actual bridge flow used is calculated by multiplying this value with the filament flow ratio, and if set, the object's flow ratio." msgstr "" "이 값은 내부 브릿지 레이어의 두께를 결정합니다. 내부 브릿지는 드문 채우기 위의 첫 레이어이므로 값을 높이면 강도와 상단 레이어 품질이 향상될 수 있습니다.\n" "1.0보다 큰 값: 선 간격을 유지하면서 재료 양을 늘립니다. 선의 접촉과 강도가 향상될 수 있습니다.\n" "1.0보다 작은 값: 접촉을 유지하도록 선 간격을 조정하면서 재료 양을 줄입니다. 처짐이 개선될 수 있습니다.\n" "\n" "실제 사용되는 브릿지 압출량은 이 값에 필라멘트 압출량 비율과, 설정된 경우 객체의 압출량 비율을 곱하여 계산됩니다." msgid "Top surface flow ratio" msgstr "상단 표면 압출량 비율" msgid "" "This factor affects the amount of material for top solid infill. You can decrease it slightly to have smooth surface finish.\n" "\n" "The actual top surface flow used is calculated by multiplying this value with the filament flow ratio, and if set, the object's flow ratio." msgstr "" "이 요소는 상단 솔리드 인필의 재료 양에 영향을 줍니다. 표면 마감을 매끄럽게 하려면 이 값을 약간 낮출 수 있습니다.\n" "\n" "사용되는 실제 상단 표면 압출량은 이 값에 필라멘트 압출량 비율을 곱하여 계산되며, 설정된 경우 객체의 압출량 비율을 곱합니다." msgid "Bottom surface flow ratio" msgstr "하단 표면 압출량 비율" msgid "" "This factor affects the amount of material for bottom solid infill.\n" "\n" "The actual bottom solid infill flow used is calculated by multiplying this value with the filament flow ratio, and if set, the object's flow ratio." msgstr "" "이 요소는 바닥 솔리드 인필의 재료 양에 영향을 줍니다.\n" "\n" "사용되는 실제 바닥 솔리드 인필 압출량은 이 값에 필라멘트 압출량 비율을 곱하여 계산되며, 설정된 경우 객체의 압출량 비율을 곱합니다." # AI Translated msgid "Set other flow ratios" msgstr "기타 압출량 비율 설정" # AI Translated msgid "Change flow ratios for other extrusion path types." msgstr "다른 압출 경로 유형의 압출량 비율을 변경합니다." # AI Translated msgid "First layer flow ratio" msgstr "초기 레이어 압출량 비율" # AI Translated msgid "" "This factor affects the amount of material on the first layer for the extrusion path roles listed in this section.\n" "\n" "For the first layer, the actual flow ratio for each path role (does not affect brims and skirts) will be multiplied by this value." msgstr "" "이 계수는 이 섹션에 나열된 압출 경로 역할에 대해 초기 레이어의 재료 양에 영향을 줍니다.\n" "\n" "초기 레이어에서는 각 경로 역할의 실제 압출량 비율(브림과 스커트에는 영향 없음)에 이 값이 곱해집니다." # AI Translated msgid "Outer wall flow ratio" msgstr "외벽 압출량 비율" # AI Translated msgid "" "This factor affects the amount of material for outer walls.\n" "\n" "The actual outer wall flow used is calculated by multiplying this value by the filament flow ratio, and if set, the object's flow ratio." msgstr "" "이 계수는 외벽의 재료 양에 영향을 줍니다.\n" "\n" "실제 사용되는 외벽 압출량은 이 값에 필라멘트 압출량 비율과, 설정된 경우 객체의 압출량 비율을 곱하여 계산됩니다." # AI Translated msgid "Inner wall flow ratio" msgstr "내벽 압출량 비율" # AI Translated msgid "" "This factor affects the amount of material for inner walls.\n" "\n" "The actual inner wall flow used is calculated by multiplying this value by the filament flow ratio, and if set, the object's flow ratio." msgstr "" "이 계수는 내벽의 재료 양에 영향을 줍니다.\n" "\n" "실제 사용되는 내벽 압출량은 이 값에 필라멘트 압출량 비율과, 설정된 경우 객체의 압출량 비율을 곱하여 계산됩니다." # AI Translated msgid "Overhang flow ratio" msgstr "오버행 압출량 비율" # AI Translated msgid "" "This factor affects the amount of material for overhangs.\n" "\n" "The actual overhang flow used is calculated by multiplying this value by the filament flow ratio, and if set, the object's flow ratio." msgstr "" "이 계수는 오버행의 재료 양에 영향을 줍니다.\n" "\n" "실제 사용되는 오버행 압출량은 이 값에 필라멘트 압출량 비율과, 설정된 경우 객체의 압출량 비율을 곱하여 계산됩니다." # AI Translated msgid "Sparse infill flow ratio" msgstr "드문 채우기 압출량 비율" # AI Translated msgid "" "This factor affects the amount of material for sparse infill.\n" "\n" "The actual sparse infill flow used is calculated by multiplying this value by the filament flow ratio, and if set, the object's flow ratio." msgstr "" "이 계수는 드문 채우기의 재료 양에 영향을 줍니다.\n" "\n" "실제 사용되는 드문 채우기 압출량은 이 값에 필라멘트 압출량 비율과, 설정된 경우 객체의 압출량 비율을 곱하여 계산됩니다." # AI Translated msgid "Internal solid infill flow ratio" msgstr "꽉찬 내부 채우기 압출량 비율" # AI Translated msgid "" "This factor affects the amount of material for internal solid infill.\n" "\n" "The actual internal solid infill flow used is calculated by multiplying this value by the filament flow ratio, and if set, the object's flow ratio." msgstr "" "이 계수는 꽉찬 내부 채우기의 재료 양에 영향을 줍니다.\n" "\n" "실제 사용되는 꽉찬 내부 채우기 압출량은 이 값에 필라멘트 압출량 비율과, 설정된 경우 객체의 압출량 비율을 곱하여 계산됩니다." # AI Translated msgid "Gap fill flow ratio" msgstr "간격 채우기 압출량 비율" # AI Translated msgid "" "This factor affects the amount of material for filling the gaps.\n" "\n" "The actual gap filling flow used is calculated by multiplying this value by the filament flow ratio, and if set, the object's flow ratio." msgstr "" "이 계수는 간격을 채우는 데 사용되는 재료 양에 영향을 줍니다.\n" "\n" "실제 사용되는 간격 채우기 압출량은 이 값에 필라멘트 압출량 비율과, 설정된 경우 객체의 압출량 비율을 곱하여 계산됩니다." # AI Translated msgid "Support flow ratio" msgstr "서포트 압출량 비율" # AI Translated msgid "" "This factor affects the amount of material for support.\n" "\n" "The actual support flow used is calculated by multiplying this value by the filament flow ratio, and if set, the object's flow ratio." msgstr "" "이 계수는 서포트의 재료 양에 영향을 줍니다.\n" "\n" "실제 사용되는 서포트 압출량은 이 값에 필라멘트 압출량 비율과, 설정된 경우 객체의 압출량 비율을 곱하여 계산됩니다." # AI Translated msgid "Support interface flow ratio" msgstr "서포트 접점 압출량 비율" # AI Translated msgid "" "This factor affects the amount of material for the support interface.\n" "\n" "The actual support interface flow used is calculated by multiplying this value by the filament flow ratio, and if set, the object's flow ratio." msgstr "" "이 계수는 서포트 접점의 재료 양에 영향을 줍니다.\n" "\n" "실제 사용되는 서포트 접점 압출량은 이 값에 필라멘트 압출량 비율과, 설정된 경우 객체의 압출량 비율을 곱하여 계산됩니다." msgid "Precise wall" msgstr "정밀한 벽" # AI Translated msgid "Improve shell precision by adjusting outer wall spacing. This also improves layer consistency. NOTE: This option will be ignored for outer-inner or inner-outer-inner wall sequences." msgstr "외벽 간격을 조정하여 쉘 정밀도를 높입니다. 레이어 일관성도 향상됩니다. 참고: 이 옵션은 외벽-내벽 또는 내벽-외벽-내벽 순서에서는 무시됩니다." msgid "Only one wall on top surfaces" msgstr "상단 표면에 단일 벽 생성" msgid "Use only one wall on flat top surfaces, to give more space to the top infill pattern." msgstr "평평한 상단 표면에 하나의 벽만 사용하여 상단 표면 패턴에 더 많은 공간을 제공합니다" msgid "One wall threshold" msgstr "단일 벽 임계값" #, no-c-format, no-boost-format msgid "" "If a top surface has to be printed and it's partially covered by another layer, it won't be considered at a top layer where its width is below this value. This can be useful to not let the 'one perimeter on top' trigger on surface that should be covered only by perimeters. This value can be a mm or a % of the perimeter extrusion width.\n" "Warning: If enabled, artifacts can be created if you have some thin features on the next layer, like letters. Set this setting to 0 to remove these artifacts." msgstr "" "상단 표면을 출력해야 하고 부분적으로 다른 레이어로 덮여 있는 경우 너비가 이 값 미만인 상단 레이어에서는 고려되지 않습니다. 이는 둘레로만 덮여야 하는 표면에서 '상단 둘레 하나'가 발동되지 않도록 하는 데 유용할 수 있습니다. 이 값은 압출 너비의 mm 또는 %로 설정됩니다.\n" "경고: 활성화된 경우, 의도치 않은 형상이 생성되는건 다음 레이어에 문자와 같은 일부 얇은 형상이 있기 때문입니다. 이러한 형상을 제거하려면 이 값을 0으로 설정하세요." msgid "Only one wall on first layer" msgstr "하단 표면에 단일 벽 생성" msgid "Use only one wall on first layer, to give more space to the bottom infill pattern." msgstr "첫 레이어에 하나의 벽만 사용하여 하단 표면 패턴에 더 많은 공간을 제공합니다" msgid "Extra perimeters on overhangs" msgstr "오버행 추가 둘레" msgid "Create additional perimeter paths over steep overhangs and areas where bridges cannot be anchored." msgstr "가파른 오버행와 브릿지를 고정할 수 없는 지역 위에 추가 둘레 경로를 만듭니다." msgid "Reverse on even" msgstr "짝수에 반전" msgid "Overhang reversal" msgstr "오버행 반전" msgid "" "Extrude perimeters that have a part over an overhang in the reverse direction on even layers. This alternating pattern can drastically improve steep overhangs.\n" "\n" "This setting can also help reduce part warping due to the reduction of stresses in the part walls." msgstr "" "짝수 레이어에서 반대 방향으로 오버행 위에 부분이 있는 둘레를 돌출시킵니다. 이러한 교대 패턴은 가파른 오버행을 대폭 개선할 수 있습니다.\n" "\n" "이 설정은 부품 벽의 응력 감소로 인한 부품 뒤틀림을 줄이는 데도 도움이 될 수 있습니다." msgid "Reverse only internal perimeters" msgstr "내부 둘레만 반전" msgid "" "Apply the reverse perimeters logic only on internal perimeters.\n" "\n" "This setting greatly reduces part stresses as they are now distributed in alternating directions. This should reduce part warping while also maintaining external wall quality. This feature can be very useful for warp prone material, like ABS/ASA, and also for elastic filaments, like TPU and Silk PLA. It can also help reduce warping on floating regions over supports.\n" "\n" "For this setting to be the most effective, it is recommended to set the Reverse Threshold to 0 so that all internal walls print in alternating directions on even layers irrespective of their overhang degree." msgstr "" "내부 경계에만 역방향 경계 논리를 적용합니다.\n" "\n" "이 설정을 사용하면 부품 응력이 이제 교대로 분산되므로 부품 응력이 크게 줄어듭니다. 이렇게 하면 부품 뒤틀림이 줄어들면서 외부 벽 품질도 유지됩니다. 이 기능은 ABS/ASA와 같이 뒤틀리기 쉬운 소재와 TPU 및 Silk PLA와 같은 탄성 필라멘트에 매우 유용할 수 있습니다. 또한 서포트 위에 떠 있는 영역의 뒤틀림을 줄이는 데 도움이 될 수 있습니다.\n" "\n" "이 설정이 가장 효과적이려면 모든 내부 벽이 돌출 정도에 관계없이 균일한 레이어에서 교대로 출력되도록 역방향 임계값을 0으로 설정하는 것이 좋습니다." msgid "Bridge counterbore holes" msgstr "브릿지 카운터보어 구멍" msgid "" "This option creates bridges for counterbore holes, allowing them to be printed without support. Available modes include:\n" "1. None: No bridge is created\n" "2. Partially Bridged: Only a part of the unsupported area will be bridged\n" "3. Sacrificial Layer: A full sacrificial bridge layer is created" msgstr "" "이 옵션은 카운터보어 구멍에 대한 브릿지를 생성하여 서포트 없이 출력할 수 있도록 합니다. 사용 가능한 모드는 다음과 같습니다.\n" "1. 없음: 브릿지가 생성되지 않습니다.\n" "2. 부분적 브릿지: 지원되지 않는 영역의 일부만 브릿지됩니다.\n" "3. 희생층: 전체 희생 브릿지 레이어가 생성됩니다." msgid "Partially bridged" msgstr "부분적 브릿지" msgid "Sacrificial layer" msgstr "희생층" msgid "Reverse threshold" msgstr "반전 임계값" msgid "Overhang reversal threshold" msgstr "오버행 반전 임계값" #, no-c-format, no-boost-format msgid "" "Number of mm the overhang need to be for the reversal to be considered useful. Can be a % of the perimeter width.\n" "Value 0 enables reversal on every even layers regardless.\n" "When Detect overhang wall is not enabled, this option is ignored and reversal happens on every even layers regardless." msgstr "" "반전이 유용한 것으로 간주되려면 오버행이 몇 mm가 되어야 합니다. 둘레 폭을 % o으로 설정할 수 있습니다.\n" "값이 0이면 모든 짝수 레이어에 관계없이 반전이 활성화됩니다.\n" "돌출 벽 감지가 활성화되지 않은 경우 이 옵션은 무시되고 모든 짝수 레이어에서 반전이 수행됩니다." msgid "Slow down for overhangs" msgstr "오버행에서 감속" msgid "Enable this option to slow down when printing overhangs. The speeds for different overhang percentages are set below." msgstr "오버행 정도에 따라 출력 속도를 낮추려면 이 옵션을 활성화합니다" msgid "Slow down for curled perimeters" msgstr "구부러진 둘레에서 감속" # AI Translated #, no-c-format, no-boost-format msgid "" "Enable this option to slow down printing in areas where perimeters may have curled upwards.\n" "For example, additional slowdown will be applied when printing overhangs on sharp corners like the front of the Benchy hull, reducing curling which compounds over multiple layers.\n" "\n" "It is generally recommended to have this option switched on unless your printer cooling is powerful enough or the print speed is slow enough that perimeter curling does not happen. \n" "If printing with a high external perimeter speed, this parameter may introduce wall artifacts when slowing down, due to the potentially large variance in print speeds causing the extruder to be unable to keep up with the requested flow change.\n" "Root cause of these artifacts is most likely PA tuning being slightly off, especially when combined with a high PA smooth time.\n" "\n" "Recommendations when enabling this option:\n" "1. Reduce Pressure Advance smooth time to 0.015 - 0.02 so the extruder reacts quickly to the speed changes.\n" "2. Increase the minimum print speeds to limit the magnitude of the slowdown and reduce the variance between fast and slow segments.\n" "3. If artifacts still appear, enable Extrusion Rate Smoothing (ERS) to further smooth the flow transitions.\n" "\n" "Note: When this option is enabled, overhang perimeters are treated like overhangs, meaning the overhang speed is applied even if the overhanging perimeter is part of a bridge.\n" "For example, when the perimeters are 100% overhanging, with no wall supporting them from underneath, the 100% overhang speed will be applied." msgstr "" "둘레가 위로 말려 올라갈 수 있는 영역에서 출력 속도를 늦추려면 이 옵션을 활성화하십시오.\n" "예를 들어 Benchy 선체 앞부분과 같은 날카로운 모서리의 오버행을 출력할 때 추가 감속이 적용되어, 여러 레이어에 걸쳐 누적되는 말림을 줄여 줍니다.\n" "\n" "프린터 냉각 성능이 충분히 강하거나 출력 속도가 충분히 느려 둘레 말림이 발생하지 않는 경우가 아니라면, 일반적으로 이 옵션을 켜 두는 것이 좋습니다.\n" "외벽 속도를 높게 설정하여 출력하는 경우, 출력 속도 차이가 커져 압출기가 요구되는 압출량 변화를 따라가지 못해 감속 시 벽에 아티팩트가 생길 수 있습니다.\n" "이러한 아티팩트의 근본 원인은 대부분 PA 조정이 약간 어긋난 것이며, 특히 PA 평활 시간이 큰 경우에 두드러집니다.\n" "\n" "이 옵션을 활성화할 때의 권장 사항:\n" "1. 압출기가 속도 변화에 빠르게 반응하도록 Pressure Advance 평활 시간을 0.015 - 0.02로 줄이십시오.\n" "2. 최소 출력 속도를 높여 감속 폭을 제한하고 빠른 구간과 느린 구간의 차이를 줄이십시오.\n" "3. 그래도 아티팩트가 나타나면 압출량 평활화(ERS)를 활성화하여 압출량 전환을 더 부드럽게 하십시오.\n" "\n" "참고: 이 옵션을 활성화하면 오버행 둘레가 오버행처럼 처리되어, 오버행 둘레가 브릿지의 일부인 경우에도 오버행 속도가 적용됩니다.\n" "예를 들어 둘레가 100% 오버행이고 아래에서 받쳐 주는 벽이 없으면 100% 오버행 속도가 적용됩니다." msgid "mm/s or %" msgstr "mm/s 또는 %" msgid "" "Speed of the externally visible bridge extrusions.\n" "\n" "In addition, if Slow down for curled perimeters is disabled or Classic overhang mode is enabled, it will be the print speed of overhang walls that are supported by less than 13%, whether they are part of a bridge or an overhang." msgstr "" "외부에서 볼 수 있는 브릿지 돌출 속도입니다.\n" "\n" "또한, 구부러진 둘레에 대한 속도 저하가 비활성화되거나 클래식 오버행 모드가 활성화된 경우 브릿지의 일부이든 오버행이든 상관없이 오버행 벽의 출력 속도는 13% 미만으로 지원됩니다." msgid "Speed of internal bridges. If the value is expressed as a percentage, it will be calculated based on the bridge_speed. Default value is 150%." msgstr "내부 브릿지의 속도. 값을 백분율로 표현하면 bridge_speed를 기준으로 계산됩니다. 기본값은 150%입니다." msgid "Brim width" msgstr "브림 너비" msgid "This is the distance from the model to the outermost brim line." msgstr "모델과 가장 바깥쪽 브림 선까지의 거리" msgid "Brim type" msgstr "브림 유형" msgid "This controls the generation of the brim at outer and/or inner side of models. Auto means the brim width is analyzed and calculated automatically." msgstr "모델의 외부 그리고/또는 내부에서 브림의 생성을 제어합니다. 자동은 브림너비가 자동으로 분석 및 계산됨을 의미합니다." msgid "Brim-object gap" msgstr "브림-객체 간격" msgid "This creates a gap between the innermost brim line and the object and can make the brim easier to remove." msgstr "가장 안쪽 브림 라인과 객체 사이에 간격을 주어 쉽게 브림을 제거 할 수 있게 합니다" # AI Translated msgid "Brim flow ratio" msgstr "브림 압출량 비율" # AI Translated msgid "" "This factor affects the amount of material for brims.\n" "\n" "The actual brim flow used is calculated by multiplying this value by the filament flow ratio, and if set, the object's flow ratio.\n" "\n" "Note: The resulting value will not be affected by the first-layer flow ratio." msgstr "" "이 계수는 브림의 재료 양에 영향을 줍니다.\n" "\n" "실제 사용되는 브림 압출량은 이 값에 필라멘트 압출량 비율과, 설정된 경우 객체의 압출량 비율을 곱하여 계산됩니다.\n" "\n" "참고: 결과 값은 초기 레이어 압출량 비율의 영향을 받지 않습니다." msgid "Brim follows compensated outline" msgstr "브림는 보상된 아웃라인을 따릅니다." # AI Translated msgid "" "When enabled, the brim is aligned with the first-layer perimeter geometry after Elephant Foot Compensation is applied.\n" "This option is intended for cases where Elephant Foot Compensation significantly alters the first-layer footprint.\n" "\n" "If your current setup already works well, enabling it may be unnecessary and can cause the brim to fuse with upper layers." msgstr "" "활성화하면 코끼리 발 보정이 적용된 후의 첫 번째 레이어 외벽 형상에 맞춰 브림이 정렬됩니다.\n" "이 옵션은 코끼리 발 보정이 첫 번째 레이어의 바닥 면적을 크게 변경하는 경우를 위한 것입니다.\n" "\n" "현재 설정이 이미 잘 작동한다면 활성화할 필요가 없으며, 브림이 위쪽 레이어와 융합될 수 있습니다." # AI Translated msgid "Combine brims" msgstr "브림 결합" # AI Translated msgid "Combine multiple brims into one when they are close to each other. This can improve brim adhesion." msgstr "여러 브림이 서로 가까이 있을 때 하나로 결합합니다. 브림 접착력이 향상될 수 있습니다." msgid "Brim ears" msgstr "브림 귀" msgid "Only draw brim over the sharp edges of the model." msgstr "모델의 날카로운 가장자리에만 브림을 그립니다." msgid "Brim ear max angle" msgstr "브림 귀 최대 각도" msgid "" "Maximum angle to let a brim ear appear.\n" "If set to 0, no brim will be created.\n" "If set to ~180, brim will be created on everything but straight sections." msgstr "" "브림 귀가 나타날 수 있는 최대 각도.\n" "0으로 설정하면 브림이 생성되지 않습니다.\n" "~180으로 설정하면 직선 부분을 제외한 모든 부분에 브림이 생성됩니다." msgid "Brim ear detection radius" msgstr "브림 귀 감지 반경" msgid "" "The geometry will be decimated before detecting sharp angles. This parameter indicates the minimum length of the deviation for the decimation.\n" "0 to deactivate." msgstr "" "날카로운 각도를 감지하기 전에 형상이 무시됩니다. 이 매개변수는 무시하는 형상의 최소 길이를 나타냅니다.\n" "0으로 비활성화합니다" msgid "upward compatible machine" msgstr "상향 호환 장치" # AI Translated msgid "Condition" msgstr "조건" msgid "A Boolean expression using the configuration values of an active printer profile. If this expression evaluates to true, this profile is considered compatible with the active printer profile." msgstr "활성 프린터 프로필의 구성 값을 사용하는 불리언 표현식입니다. 이 표현식이 true로 평가되면 이 프로필은 활성 프린터 프로필과 호환되는 것으로 간주됩니다." msgid "A Boolean expression using the configuration values of an active print profile. If this expression evaluates to true, this profile is considered compatible with the active print profile." msgstr "활성 출력 프로필의 구성 값을 사용하는 불리언 표현식입니다. 이 표현식이 true로 평가되면 이 프로필은 활성 출력 프로필과 호환되는 것으로 간주됩니다." msgid "This determines the print sequence, allowing you to print layer-by-layer or object-by-object." msgstr "출력순서, 레이어별 또는 객체별" msgid "By layer" msgstr "레이어별" msgid "By object" msgstr "객체별" msgid "Intra-layer order" msgstr "레이어 내 순서" # AI Translated msgid "" "Order in which object instances are visited within a single layer, which controls how much travel is spent moving between them.\n" "\n" "Default: nearest-neighbor chaining, refined with 2-opt and crossing removal. A good general choice.\n" "As object list: instances are printed in the same order as the object list, without any path optimization. Use it when you need a predictable, manually controlled order.\n" "Best of all (shortest path): every strategy is evaluated and the shortest one is used. The object instance order is decided once for the whole print, while the ordering of individual islands is decided per layer, so different layers may end up using different strategies. Slightly slower to slice.\n" "Snake: serpentine row-by-row traversal, refined with 2-opt. Well suited to regular grids of many small parts.\n" "\n" "With multiple filaments or tools in the same layer, minimizing tool changes takes priority: objects are grouped by filament first and this setting only orders the instances within each filament group, so the overall sequence may not look like the shortest path across the plate." msgstr "" "단일 레이어 내에서 객체 인스턴스를 방문하는 순서로, 인스턴스 사이를 오가는 이동량을 결정합니다.\n" "\n" "기본값: 최근접 이웃 방식으로 경로를 연결하고 2-opt와 교차 제거로 개선합니다. 일반적으로 무난한 선택입니다.\n" "객체 목록으로: 경로 최적화 없이 객체 목록과 동일한 순서로 인스턴스를 출력합니다. 예측 가능하고 수동으로 제어되는 순서가 필요할 때 사용하십시오.\n" "전체 비교(최단 경로): 모든 전략을 평가하여 가장 짧은 것을 사용합니다. 객체 인스턴스 순서는 출력 전체에 대해 한 번만 결정되고 개별 아일랜드의 순서는 레이어마다 결정되므로, 레이어에 따라 서로 다른 전략이 사용될 수 있습니다. 슬라이싱이 약간 느려집니다.\n" "사행형: 행 단위로 앞뒤를 오가며 사행하듯 순회하고 2-opt로 개선합니다. 작은 부품이 규칙적인 격자로 배치된 경우에 적합합니다.\n" "\n" "같은 레이어에서 여러 필라멘트나 툴을 사용하는 경우에는 툴 교체 최소화가 우선합니다. 객체를 먼저 필라멘트별로 그룹화하며 이 설정은 각 필라멘트 그룹 내의 인스턴스 순서만 결정하므로, 전체 순서가 플레이트 전체의 최단 경로처럼 보이지 않을 수 있습니다." msgid "As object list" msgstr "객체 목록으로" # AI Translated msgid "Best of all (shortest path)" msgstr "전체 비교(최단 경로)" # AI Translated msgid "Snake" msgstr "사행형" msgid "Slow printing down for better layer cooling" msgstr "레이어 냉각 향상을 위한 감속" msgid "Enable this option to slow printing speed down to ensure that the final layer time is not shorter than the layer time threshold in \"Max fan speed threshold\", so that the layer can be cooled for a longer time. This can improve the quality for small details." msgstr "이 옵션을 활성화하여 최종 레이어 시간이 \"최대 팬 속도 임계값\" 의 \"레이어 시간\" 임계값보다 짧지 않도록 출력 속도를 낮추어 레이어를 더 오랫동안 냉각할 수 있습니다. 바늘 모양이나 작은 출력물의 냉각 품질을 향상 시킬 수 있습니다" msgid "Normal printing" msgstr "일반 출력" msgid "This is the default acceleration for both normal printing and travel after the first layer." msgstr "초기 레이어를 제외한 모든 일반 출력 및 이동의 기본 가속" msgid "Acceleration of travel moves." msgstr "이동 가속도" # AI Translated msgid "First layer travel" msgstr "초기 레이어 이동" # AI Translated msgid "" "Travel acceleration of first layer.\n" "The percentage value is relative to Travel Acceleration." msgstr "" "초기 레이어의 이동 가속도입니다.\n" "백분율 값은 이동 가속도를 기준으로 합니다." msgid "mm/s² or %" msgstr "mm/s² 또는 %" msgid "Acceleration of bridges. If the value is expressed as a percentage (e.g. 50%), it will be calculated based on the outer wall acceleration." msgstr "브릿지의 가속도. 값을 백분율 (ex. 50%)로 표시하면 외벽 가속도 기준으로 계산됩니다." msgid "Default filament profile" msgstr "기본 필라멘트 사전설정" msgid "Default filament profile when switching to this machine profile." msgstr "이 장치 사전설정으로 전환할 때의 기본 필라멘트 사전설정" msgid "Default process profile" msgstr "기본 프로세스 사전설정" msgid "Default process profile when switching to this machine profile." msgstr "이 장치 사전설정으로 전환할 때의 기본 프로세스 사전설정" msgid "Activate air filtration" msgstr "공기 여과 활성화" msgid "Activate for better air filtration. G-code command: M106 P3 S(0-255)" msgstr "더 나은 공기 여과를 위해 활성화하세요. Gcode 명령: M106 P3 S(0-255)" # AI Translated msgid "Enable this to override the fan speed set in custom G-code during print." msgstr "출력 중 사용자 정의 G-code에 설정된 팬 속도를 재정의하려면 이 옵션을 활성화하십시오." # AI Translated msgid "On completion" msgstr "완료 시" # AI Translated msgid "Enable this to override the fan speed set in custom G-code after print completion." msgstr "출력 완료 후 사용자 정의 G-code에 설정된 팬 속도를 재정의하려면 이 옵션을 활성화하십시오." msgid "Speed of exhaust fan during printing. This speed will override the speed in filament custom G-code." msgstr "출력 중 배기 팬 속도. 이 속도는 필라멘트 사용자 정의 Gcode의 속도를 덮어씁니다" msgid "Speed of exhaust fan after printing completes." msgstr "출력 완료 후 배기 팬 속도" msgid "No cooling for the first" msgstr "처음에는 냉각이 적용되지 않습니다" msgid "Turn off all cooling fans for the first few layers. This can be used to improve build plate adhesion." msgstr "빌드 플레이트의 접착력 향상을 위해 첫 레이어부터 특정 레이어까지의 모든 냉각 팬을 정지합니다" msgid "Don't support bridges" msgstr "브릿지에서 서포트 사용안함" msgid "This disables supporting bridges, which decreases the amount of support required. Bridges can usually be printed directly without support over a reasonable distance." msgstr "서포트를 크게 만드는 전체 브릿지 영역에 서포트를 사용하지 않습니다. 브릿지는 일반적으로 매우 길지 않은 경우 서포트 없이 직접 출력할 수 있습니다." msgid "Thick external bridges" msgstr "두꺼운 외부 브릿지" # AI Translated msgid "" "If enabled, bridge extrusion uses a line height equal to the nozzle diameter.\n" "This increases bridge strength and reliability, allowing longer spans, but may worsen appearance.\n" "If disabled, bridges may look better but are generally reliable only for shorter spans." msgstr "" "활성화하면 브릿지 압출이 노즐 직경과 같은 선 높이를 사용합니다.\n" "브릿지 강도와 신뢰성이 높아져 더 긴 구간을 건널 수 있지만 외관은 나빠질 수 있습니다.\n" "비활성화하면 브릿지 외관은 더 좋아지지만 일반적으로 짧은 구간에서만 안정적입니다." msgid "Thick internal bridges" msgstr "두꺼운 내부 브릿지" # AI Translated msgid "" "If enabled, internal bridge extrusion uses a line height equal to the nozzle diameter.\n" "This increases internal bridge strength and reliability when printed over sparse infill, but may worsen appearance.\n" "If disabled, internal bridges may look better but can be less reliable over sparse infill." msgstr "" "활성화하면 내부 브릿지 압출이 노즐 직경과 같은 선 높이를 사용합니다.\n" "드문 채우기 위에 출력할 때 내부 브릿지의 강도와 신뢰성이 높아지지만 외관은 나빠질 수 있습니다.\n" "비활성화하면 내부 브릿지 외관은 더 좋아지지만 드문 채우기 위에서는 안정성이 떨어질 수 있습니다." msgid "Extra bridge layers (beta)" msgstr "추가 브릿지 레이어(베타)" msgid "" "This option enables the generation of an extra bridge layer over internal and/or external bridges.\n" "\n" "Extra bridge layers help improve bridge appearance and reliability, as the solid infill is better supported. This is especially useful in fast printers, where the bridge and solid infill speeds vary greatly. The extra bridge layer results in reduced pillowing on top surfaces, as well as reduced separation of the external bridge layer from its surrounding perimeters.\n" "\n" "It is generally recommended to set this to at least 'External bridge only', unless specific issues with the sliced model are found.\n" "\n" "Options:\n" "1. Disabled - does not generate second bridge layers. This is the default and is set for compatibility purposes\n" "2. External bridge only - generates second bridge layers for external-facing bridges only. Please note that small bridges that are shorter or narrower than the set number of perimeters will be skipped as they would not benefit from a second bridge layer. If generated, the second bridge layer will be extruded parallel to the first bridge layer to reinforce the bridge strength\n" "3. Internal bridge only - generates second bridge layers for internal bridges over sparse infill only. Please note that the internal bridges count towards the top shell layer count of your model. The second internal bridge layer will be extruded as close to perpendicular to the first as possible. If multiple regions in the same island, with varying bridge angles are present, the last region of that island will be selected as the angle reference\n" "4. Apply to all - generates second bridge layers for both internal and external-facing bridges\n" msgstr "" "이 옵션을 사용하면 내부 및/또는 외부 브릿지 위에 추가 브릿지 레이어를 생성할 수 있습니다.\n" "\n" "추가 브릿지 레이어는 솔리드 인필이 더 잘 지원되므로 브릿지 모양과 안정성을 개선하는 데 도움이 됩니다. 이 옵션은 브릿지와 솔리드 인필 속도가 크게 달라지는 고속 프린터에서 특히 유용합니다. 브릿지 레이어가 추가되면 상단 표면의 필로우가 줄어들고 외부 브릿지 레이어가 주변 경계와 분리되는 현상이 줄어듭니다.\n" "\n" "일반적으로 슬라이스 모델에 특별한 문제가 발견되지 않는 한 최소한 '외부 브릿지 전용'으로 설정하는 것이 좋습니다.\n" "\n" "옵션\n" "1. 비활성화 - 두 번째 브릿지 레이어를 생성하지 않습니다. 기본값이며 호환성을 위해 설정됩니다.\n" "2. 외부 브릿지만 - 외부를 향한 브릿지에 대해서만 두 번째 브릿지 레이어를 생성합니다. 설정된 둘레 수보다 짧거나 좁은 작은 다리는 두 번째 브릿지 레이어의 이점이 없으므로 건너뛰게 됩니다. 두 번째 브릿지 레이어가 생성되면 첫 번째 브릿지 레이어와 평행하게 돌출되어 브릿지 강도를 강화합니다.\n" "3. 내부 브릿지 전용 - 스파스 인필 위에 있는 내부 브릿지에 대해서만 두 번째 브릿지 레이어를 생성합니다. 내부 브릿지는 모델의 최상위 셸 레이어 수에 포함된다는 점에 유의하세요. 두 번째 내부 브릿지 레이어는 가능한 한 첫 번째 브릿지 레이어에 수직에 가깝게 돌출됩니다. 동일한 섬에 다양한 다리 각도를 가진 여러 영역이 있는 경우 해당 섬의 마지막 영역이 각도 참조로 선택됩니다.\n" "4. 모두 적용 - 내부 및 외부를 향한 브릿지 모두에 대한 두 번째 브릿지 레이어를 생성합니다.\n" msgid "External bridge only" msgstr "외부 브릿지 전용" msgid "Internal bridge only" msgstr "내부 브릿지 전용" msgid "Apply to all" msgstr "모두 적용" msgid "Filter out small internal bridges" msgstr "작은 내부 브릿지 필터링" msgid "" "This option can help reduce pillowing on top surfaces in heavily slanted or curved models.\n" "By default, small internal bridges are filtered out and the internal solid infill is printed directly over the sparse infill. This works well in most cases, speeding up printing without too much compromise on top surface quality.\n" "However, in heavily slanted or curved models, especially where too low a sparse infill density is used, this may result in curling of the unsupported solid infill, causing pillowing.\n" "Enabling limited filtering or no filtering will print internal bridge layer over slightly unsupported internal solid infill. The options below control the sensitivity of the filtering, i.e. they control where internal bridges are created:\n" "1. Filter - enables this option. This is the default behavior and works well in most cases\n" "2. Limited filtering - creates internal bridges on heavily slanted surfaces while avoiding unnecessary bridges. This works well for most difficult models\n" "3. No filtering - creates internal bridges on every potential internal overhang. This option is useful for heavily slanted top surface models; however, in most cases, it creates too many unnecessary bridges." msgstr "" "이 옵션을 사용하면 심하게 기울어지거나 구부러진 모델에서 상단 표면의 필링을 줄일 수 있습니다.\n" "\n" "기본적으로 작은 내부 브릿지는 필터링되고 내부 솔리드 인필은 스파스 인필 위에 직접 출력됩니다. 이 방법은 대부분의 경우 잘 작동하여 표면 품질을 크게 저하시키지 않으면서 출력 속도를 높일 수 있습니다.\n" "\n" "그러나 경사가 심하거나 곡선형 모델, 특히 너무 낮은 스파스 인필 밀도를 사용하는 경우 지원되지 않는 솔리드 인필이 말려서 필로우가 발생할 수 있습니다.\n" "\n" "필터링을 제한하거나 필터링을 사용하지 않도록 설정하면 약간 지원되지 않는 내부 솔리드 인필 위에 내부 브릿지 레이어가 출력됩니다. 아래 옵션은 필터링의 민감도, 즉 내부 브릿지가 생성되는 위치를 제어합니다.\n" "\n" "1. 필터 - 이 옵션을 활성화합니다. 기본 동작이며 대부분의 경우 잘 작동합니다.\n" "\n" "2. 제한된 필터링 - 불필요한 브릿지를 피하면서 심하게 기울어진 표면에 내부 브릿지를 만듭니다. 이 옵션은 대부분의 어려운 모델에 적합합니다.\n" "\n" "3. 필터링 없음 - 모든 잠재적인 내부 오버행에 내부 브릿지를 생성합니다. 이 옵션은 경사가 심한 윗면 모델에 유용하지만, 대부분의 경우 불필요한 브릿지가 너무 많이 생성됩니다." msgid "Limited filtering" msgstr "제한된 필터링" msgid "No filtering" msgstr "필터링 없음" msgid "Max bridge length" msgstr "최대 브릿지 길이" msgid "This is the maximum length of bridges that don't need support. Set it to 0 if you want all bridges to be supported, and set it to a very large value if you don't want any bridges to be supported." msgstr "서포트가 필요하지 않은 브릿지의 최대 길이. 모든 브릿지에 서포트를 생성하려면 0으로 설정하고 브릿지에 서포트를 생성하지 않으려면 매우 큰 값으로 설정합니다." msgid "End G-code" msgstr "종료 Gcode" msgid "Add end G-Code when finishing the entire print." msgstr "출력이 종료될 때의 Gcode" msgid "Between Object G-code" msgstr "객체 사이의 Gcode" msgid "Insert G-code between objects. This parameter will only come into effect when you print your models object by object." msgstr "객체 사이에 Gcode를 삽입하세요. 이 매개변수는 객체별 출력을 사용할 때만 적용됩니다" msgid "Add end G-code when finishing the printing of this filament." msgstr "이 필라멘트의 출력이 끝날때의 종료 Gcode" msgid "Ensure vertical shell thickness" msgstr "수직 쉘 두께 확보" msgid "" "Add solid infill near sloping surfaces to guarantee the vertical shell thickness (top+bottom solid layers)\n" "None: No solid infill will be added anywhere. Caution: Use this option carefully if your model has sloped surfaces\n" "Critical Only: Avoid adding solid infill for walls\n" "Moderate: Add solid infill for heavily sloping surfaces only\n" "All: Add solid infill for all suitable sloping surfaces\n" "Default value is All." msgstr "" "경사면 근처에 견고한 충전재를 추가하여 수직 쉘 두께(상단 + 하단 솔리드 레이어)를 보장합니다.\n" "없음: 솔리드 채우기가 어디에도 추가되지 않습니다. 주의: 모델에 경사면이 있는 경우 이 옵션을 주의해서 사용하십시오.\n" "중요한 것만: 벽에 견고한 채우기를 추가하지 마십시오.\n" "보통: 경사가 심한 표면에만 견고한 채우기를 추가합니다.\n" "모두: 적합한 모든 경사면에 대해 솔리드 채우기를 추가합니다.\n" "기본값은 모두입니다." msgid "Critical Only" msgstr "중요한 것만" msgid "Moderate" msgstr "보통" msgid "Top surface pattern" msgstr "상단 표면 패턴" msgid "This is the line pattern for top surface infill." msgstr "상단 표면 채우기의 선 패턴" msgid "Monotonic" msgstr "단조" msgid "Monotonic line" msgstr "단조선" msgid "Rectilinear" msgstr "직선" msgid "Aligned Rectilinear" msgstr "정렬된 직선" msgid "Concentric" msgstr "동심" msgid "Hilbert Curve" msgstr "힐베르트 곡선" msgid "Archimedean Chords" msgstr "아르키메데스 코드" msgid "Octagram Spiral" msgstr "팔각 나선형" msgid "Top surface density" msgstr "상단 표면 밀도" # AI Translated msgid "Density of top surface layer. A value of 100% creates a fully solid, smooth top layer. Reducing this value results in a textured top surface, according to the chosen top surface pattern. A value of 0% will result in only the walls on the top layer being created. Intended for aesthetic or functional purposes, not to fix issues such as over-extrusion." msgstr "상단 표면 레이어의 밀도입니다. 100%로 설정하면 완전히 꽉 차고 매끄러운 상단 레이어가 만들어집니다. 값을 줄이면 선택한 상단 표면 패턴에 따라 질감이 있는 상단 표면이 생깁니다. 0%로 설정하면 상단 레이어에 벽만 생성됩니다. 이 옵션은 심미적 또는 기능적 목적을 위한 것이며, 과압출과 같은 문제를 해결하기 위한 것이 아닙니다." # AI Translated msgid "Top surface expansion" msgstr "상단 표면 확장" # AI Translated msgid "" "Expands the top surfaces by this distance to connect distinct top surfaces and fill gaps.\n" "Useful for cases where the top surface is interrupted by a raised feature, such as text on a plane. Expanding it removes the holes beneath these features and creates a continuous path with a better finish for printing on top. The expansion is applied to the original top surface, before any other processing such as bridging or overhang detection." msgstr "" "상단 표면을 이 거리만큼 확장하여 분리된 상단 표면을 연결하고 간격을 채웁니다.\n" "평면 위의 문자처럼 돌출된 형상 때문에 상단 표면이 끊기는 경우에 유용합니다. 확장하면 이러한 형상 아래의 구멍이 사라지고 연속된 경로가 만들어져 그 위에 출력할 때 마감이 좋아집니다. 확장은 브릿지나 오버행 감지 등 다른 처리를 하기 전에 원래의 상단 표면에 적용됩니다." # AI Translated msgid "Top expansion wall margin" msgstr "상단 확장 벽 여유" # AI Translated msgid "" "Using “Top surface expansion” may cause a surface that did not previously touch the model's outer walls to now do so.\n" "This can cause contraction marks (such as the hull line) on the outer walls.\n" "By adding a small margin, this contraction will not occur directly on the walls, thereby preventing a visible mark." msgstr "" "“상단 표면 확장”을 사용하면 이전에는 모델의 외벽에 닿지 않던 표면이 외벽에 닿게 될 수 있습니다.\n" "이로 인해 외벽에 수축 자국(선체 라인 같은)이 생길 수 있습니다.\n" "약간의 여유를 두면 이러한 수축이 벽에 직접 발생하지 않아 눈에 띄는 자국을 방지할 수 있습니다." # AI Translated msgid "Top expansion direction" msgstr "상단 확장 방향" # AI Translated msgid "" "Direction in which the top surface expansion grows.\n" " - Inward grows into the holes and gaps left by features rising from the middle of a top surface.\n" " - Outward grows the outer edge of the surface, connecting surfaces separated by features that can divide a surface, such as a lattice pattern.\n" " - Inward and Outward does both." msgstr "" "상단 표면 확장이 커지는 방향입니다.\n" " - 안쪽은 상단 표면 가운데에서 솟아오른 형상이 남긴 구멍과 간격 쪽으로 확장합니다.\n" " - 바깥쪽은 표면의 바깥 가장자리를 확장하여, 격자 패턴처럼 표면을 나누는 형상으로 분리된 표면을 연결합니다.\n" " - 안쪽 및 바깥쪽은 두 가지를 모두 수행합니다." # AI Translated msgid "Inward and Outward" msgstr "안쪽 및 바깥쪽" # AI Translated msgid "Inward" msgstr "안쪽" # AI Translated msgid "Outward" msgstr "바깥쪽" msgid "Bottom surface pattern" msgstr "하단 표면 패턴" msgid "This is the line pattern of bottom surface infill, not including bridge infill." msgstr "브릿지 채우기가 아닌 바닥면 채우기의 선 패턴" msgid "Bottom surface density" msgstr "하단 표면 밀도" # AI Translated msgid "" "Density of the bottom surface layer. Intended for aesthetic or functional purposes, not to fix issues such as over-extrusion.\n" "WARNING: Lowering this value may negatively affect bed adhesion." msgstr "" "하단 표면 레이어의 밀도입니다. 심미적 또는 기능적 목적을 위한 것이며, 과압출과 같은 문제를 해결하기 위한 것이 아닙니다.\n" "경고: 이 값을 낮추면 베드 접착력에 부정적인 영향을 줄 수 있습니다." # AI Translated msgid "Top surface fill order" msgstr "상단 표면 채우기 순서" # AI Translated msgid "" "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" "중심 기반 패턴(동심원, 아르키메데스 현, 팔각별 나선)을 사용할 때 상단 표면을 채우는 방향입니다.\n" "바깥쪽은 표면 중앙에서 시작하므로 남는 재료가 가장 눈에 덜 띄는 가장자리로 밀려납니다. 안쪽은 가장자리에서 시작하여 중앙의 좁은 곡선에서 끝납니다.\n" "기본값은 최단 경로 순서를 사용하며 어느 방향으로든 진행될 수 있습니다." # AI Translated msgid "Bottom surface fill order" msgstr "하단 표면 채우기 순서" # AI Translated msgid "" "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" "중심 기반 패턴(동심원, 아르키메데스 현, 팔각별 나선)을 사용할 때 하단 표면을 채우는 방향입니다.\n" "안쪽은 각 표면을 더 넓은 바깥쪽 곡선에서 시작하므로, 중앙의 좁은 곡선이 잘 붙지 않는 빌드 플레이트에서 초기 레이어 접착력이 향상됩니다. 바깥쪽은 중앙에서 시작하여 남는 재료를 가장자리로 밀어냅니다.\n" "기본값은 최단 경로 순서를 사용하며 어느 방향으로든 진행될 수 있습니다." msgid "Internal solid infill pattern" msgstr "꽉찬 내부 채우기 패턴" msgid "Line pattern of internal solid infill. if the detect narrow internal solid infill be enabled, the concentric pattern will be used for the small area." msgstr "꽉찬 내부 채우기의 선 패턴. 좁은 꽉찬 내부 채우기 감지가 활성화된 경우 작은 영역에 동심원 패턴이 사용됩니다." msgid "Line width of outer wall. If expressed as a %, it will be computed over the nozzle diameter." msgstr "외벽의 선 너비. %로 입력 시 노즐 직경에 대한 비율로 계산됩니다." msgid "This is the printing speed for the outer walls of parts. These are generally printed slower than inner walls for higher quality." msgstr "가장 바깥쪽의 눈에 보이는 외벽의 속도. 더 나은 품질을 얻기 위해 내벽 속도보다 느리게 사용됩니다." msgid "Small perimeters" msgstr "작은 둘레" msgid "This separate setting will affect the speed of perimeters having radius <= small_perimeter_threshold (usually holes). If expressed as percentage (for example: 80%) it will be calculated on the outer wall speed setting above. Set to zero for auto." msgstr "이 별도의 설정은 반지름이 가진 둘레의 속도에 영향을 줍니다 <= 작은 둘레 임계값(small_perimeter_threshold) 이하인 둘레(일반적으로 구멍). 백분율로 설정하면(예: 80%) 외벽 속도 설정에서 계산됩니다. 자동의 경우 0으로 설정합니다." msgid "Small perimeters threshold" msgstr "작은 둘레 임계값" msgid "This sets the threshold for small perimeter length. Default threshold is 0mm." msgstr "작은 둘레 길이에 대한 임계값을 설정합니다. 기본 임계값은 0mm입니다" # AI Translated msgid "Small support perimeters" msgstr "작은 서포트 둘레" # AI Translated msgid "Same as \"Small perimeters\", but for supports. This separate setting will affect the speed of support for areas <= `small_support_perimeter_threshold`. If expressed as a percentage (for example: 80%), it will be calculated on the support or support interface speed setting above. Set to zero for auto." msgstr "\"작은 둘레\"와 같지만 서포트에 적용됩니다. 이 별도 설정은 `small_support_perimeter_threshold` 이하 영역의 서포트 속도에 영향을 줍니다. 백분율(예: 80%)로 입력하면 위의 서포트 또는 서포트 접점 속도를 기준으로 계산됩니다. 0으로 설정하면 자동입니다." # AI Translated msgid "Small support perimeters threshold" msgstr "작은 서포트 둘레 임계값" # AI Translated msgid "This sets the threshold for small support perimeter length. The default threshold is 0mm." msgstr "작은 서포트 둘레 길이의 임계값을 설정합니다. 기본 임계값은 0mm입니다." msgid "Walls printing order" msgstr "벽 출력 순서" msgid "" "Print sequence of the internal (inner) and external (outer) walls.\n" "\n" "Use Inner/Outer for best overhangs. This is because the overhanging walls can adhere to a neighbouring perimeter while printing. However, this option results in slightly reduced surface quality as the external perimeter is deformed by being squashed to the internal perimeter.\n" "\n" "Use Inner/Outer/Inner for the best external surface finish and dimensional accuracy as the external wall is printed undisturbed from an internal perimeter. However, overhang performance will reduce as there is no internal perimeter to print the external wall against. This option requires a minimum of 3 walls to be effective as it prints the internal walls from the 3rd perimeter onwards first, then the external perimeter and, finally, the first internal perimeter. This option is recommended against the Outer/Inner option in most cases.\n" "\n" "Use Outer/Inner for the same external wall quality and dimensional accuracy benefits of Inner/Outer/Inner option. However, the Z seams will appear less consistent as the first extrusion of a new layer starts on a visible surface." msgstr "" "내벽 및 외벽의 출력 순서를 지정합니다.\n" "\n" "오버행을 가장 잘 출력하려면 내부/외부를 사용합니다. 이는 돌출된 벽이 출력하는 동안 인접한 경계에 부착될 수 있기 때문입니다. 그러나 이 옵션을 사용하면 외부 경계가 내부 경계에 눌려 변형되므로 표면 품질이 약간 저하됩니다.\n" "\n" "내부/외부/내부를 사용하면 외부 벽이 내부 경계에서 방해받지 않고 출력되므로 최상의 외부 표면 마감과 치수 정확도를 얻을 수 있습니다. 그러나 외부 벽을 출력할 내부 경계가 없으므로 오버행 성능이 저하됩니다. 이 옵션은 세 번째 경계부터 내부 벽을 먼저 출력한 다음 외부 경계, 마지막으로 첫 번째 내부 경계를 출력하므로 최소 3개 이상의 벽이 있어야 효과적입니다. 이 옵션은 대부분의 경우 외부/내부 옵션보다 권장됩니다.\n" "\n" "내부/외부/내부 옵션과 동일한 외벽 품질 및 치수 정확도 이점을 얻으려면 외부/내부를 사용하세요. 그러나 새 레이어의 첫 번째 돌출이 보이는 표면에서 시작되므로 Z 심이 덜 일관되게 나타납니다." msgid "Inner/Outer" msgstr "내벽/외벽" msgid "Outer/Inner" msgstr "외벽/내벽" msgid "Inner/Outer/Inner" msgstr "내벽/외벽/내벽" msgid "Print infill first" msgstr "채우기 먼저 출력" msgid "" "Order of wall/infill. When the tickbox is unchecked the walls are printed first, which works best in most cases.\n" "\n" "Printing infill first may help with extreme overhangs as the walls have the neighbouring infill to adhere to. However, the infill will slightly push out the printed walls where it is attached to them, resulting in a worse external surface finish. It can also cause the infill to shine through the external surfaces of the part." msgstr "" "벽/채우기 순서. 확인란을 선택 취소하면 벽이 먼저 출력되며 이는 대부분의 경우 가장 잘 작동합니다.\n" "\n" "충전재를 먼저 출력하면 벽에 접착할 인접 충전재가 있으므로 오버행이 심한 경우 도움이 될 수 있습니다. 그러나 충전재는 출력된 벽이 부착된 부분을 약간 밀어내어 외부 표면 마감이 더 나빠집니다. 또한 충전재가 부품의 외부 표면을 통해 빛날 수도 있습니다." msgid "Wall loop direction" msgstr "벽 루프 방향" # AI Translated msgid "" "The direction which the contour wall loops are extruded when looking down from the top.\n" "Holes are printed in the opposite direction to the contour to maintain alignment with layers whose contour polygons are incomplete and change direction, also partially forming the contour of a hole.\n" "\n" "This option will be disabled if spiral vase mode is enabled." msgstr "" "위에서 내려다볼 때 외곽 벽 루프가 압출되는 방향입니다.\n" "구멍은 외곽선과 반대 방향으로 출력됩니다. 이는 외곽 폴리곤이 불완전하여 방향이 바뀌고 구멍의 외곽선을 일부 형성하는 레이어와의 정렬을 유지하기 위한 것입니다.\n" "\n" "나선형 꽃병 모드가 활성화되어 있으면 이 옵션은 비활성화됩니다." msgid "Counter clockwise" msgstr "시계 반대 방향" msgid "Clockwise" msgstr "시계방향" msgid "Height to rod" msgstr "레일까지의 높이" msgid "Distance from the nozzle tip to the lower rod. Used for collision avoidance in by-object printing." msgstr "노즐 끝에서 하부 레일까지의 거리. 객체별 출력에서 충돌 방지에 사용됩니다." msgid "Height to lid" msgstr "덮개까지의 높이" msgid "Distance from the nozzle tip to the lid. Used for collision avoidance in by-object printing." msgstr "노즐 끝에서 덮개까지의 거리. 객체별 출력에서 충돌 방지에 사용됩니다." msgid "Clearance radius around extruder: used for collision avoidance in by-object printing." msgstr "압출기 주변의 회피 반경. 객체별 출력에서 충돌 방지에 사용됩니다." msgid "Nozzle height" msgstr "노즐 높이" msgid "The height of nozzle tip." msgstr "노즐 팁의 높이." msgid "Bed mesh min" msgstr "베드 메시 최소" msgid "This option sets the min point for the allowed bed mesh area. Due to the probe's XY offset, most printers are unable to probe the entire bed. To ensure the probe point does not go outside the bed area, the minimum and maximum points of the bed mesh should be set appropriately. OrcaSlicer ensures that adaptive_bed_mesh_min/adaptive_bed_mesh_max values do not exceed these min/max points. This information can usually be obtained from your printer manufacturer. The default setting is (-99999, -99999), which means there are no limits, thus allowing probing across the entire bed." msgstr "이 옵션은 허용되는 베드 메시 영역의 최소 지점을 설정합니다. 프로브의 XY 옵셋으로 인해 대부분의 프린터는 전체 베드를 프로브할 수 없습니다. 프로브 포인트가 베드 영역 밖으로 나가지 않도록 하려면 베드 메시의 최소 및 최대 지점을 적절하게 설정해야 합니다. OrcaSlicer는 adaptive_bed_mesh_min/adaptive_bed_mesh_max 값이 이러한 최소/최대 포인트를 초과하지 않도록 보장합니다. 이 정보는 일반적으로 프린터 제조업체로부터 얻을 수 있습니다. 기본 설정은 (-99999, -99999)입니다. 이는 제한이 없으므로 전체 베드에 걸쳐 프로빙이 가능함을 의미합니다." msgid "Bed mesh max" msgstr "베드 메시 최대" msgid "This option sets the max point for the allowed bed mesh area. Due to the probe's XY offset, most printers are unable to probe the entire bed. To ensure the probe point does not go outside the bed area, the minimum and maximum points of the bed mesh should be set appropriately. OrcaSlicer ensures that adaptive_bed_mesh_min/adaptive_bed_mesh_max values do not exceed these min/max points. This information can usually be obtained from your printer manufacturer. The default setting is (99999, 99999), which means there are no limits, thus allowing probing across the entire bed." msgstr "이 옵션은 허용되는 침대 메시 영역의 최대 지점을 설정합니다. 프로브의 XY 옵셋으로 인해 대부분의 프린터는 전체 베드를 프로브할 수 없습니다. 프로브 포인트가 베드 영역 밖으로 나가지 않도록 하려면 베드 메시의 최소 및 최대 지점을 적절하게 설정해야 합니다. OrcaSlicer는 adaptive_bed_mesh_min/adaptive_bed_mesh_max 값이 이러한 최소/최대 포인트를 초과하지 않도록 보장합니다. 이 정보는 일반적으로 프린터 제조업체로부터 얻을 수 있습니다. 기본 설정은 (99999, 99999)입니다. 이는 제한이 없으므로 전체 베드에 걸쳐 프로빙이 가능함을 의미합니다." msgid "Probe point distance" msgstr "프로브 포인트 거리" msgid "This option sets the preferred distance between probe points (grid size) for the X and Y directions, with the default being 50mm for both X and Y." msgstr "이 옵션은 X와 Y 방향에 대한 프로브 점(그리드 크기) 사이의 기본 거리를 설정하며 X와 Y 모두에 대한 기본값은 50mm입니다." msgid "Mesh margin" msgstr "메시 공간" msgid "This option determines the additional distance by which the adaptive bed mesh area should be expanded in the XY directions." msgstr "이 옵션은 적응형 베드 메시 영역이 XY 방향으로 확장되어야 하는 추가 거리를 결정합니다." msgid "Grab length" msgstr "그랩 길이" msgid "Extruder Color" msgstr "압출기 색상" msgid "Only used as a visual help on UI." msgstr "UI의 시각적 도움말로만 사용됨" msgid "Extruder offset" msgstr "압출기 옵셋" msgid "The material may have volumetric change after switching between molten and crystalline states. This setting changes all extrusion flow of this filament in G-code proportionally. The recommended value range is between 0.95 and 1.05. You may be able to tune this value to get a nice flat surface if there is slight overflow or underflow." msgstr "재료는 용융 상태와 결정 상태 사이를 전환한 후 부피 변화가 있을 수 있습니다. 이 설정은 이 필라멘트 코드의 모든 압출 압출량을 비례적으로 변경합니다. 권장 값 범위는 0.95와 1.05 사이입니다. 약간의 과대압출 또는 과소압출이 있을 때 이 값을 조정하여 평평한 표면을 얻을 수 있습니다" msgid "" "The material may have volumetric change after switching between molten and crystalline states. This setting changes all extrusion flow of this filament in G-code proportionally. The recommended value range is between 0.95 and 1.05. You may be able to tune this value to get a nice flat surface if there is slight overflow or underflow.\n" "\n" "The final object flow ratio is this value multiplied by the filament flow ratio." msgstr "" "재료는 용융 상태와 결정 상태 사이를 전환한 후 부피 변화가 있을 수 있습니다. 이 설정은 Gcode에서 이 필라멘트의 모든 압출 흐름을 비례적으로 변경합니다. 권장 값 범위는 0.95에서 1.05 사이입니다. 약간의 오버플로 또는 언더플로가 있는 경우 이 값을 조정하여 멋진 평면을 얻을 수 있습니다.\n" "\n" "최종 객체 흐름 비율은 이 값에 필라멘트 흐름 비율을 곱한 값입니다." msgid "Enable pressure advance" msgstr "PA 활성화" msgid "Enable pressure advance, auto calibration result will be overwritten once enabled." msgstr "PA를 활성화합니다. 활성화되면 자동 보정 결과를 덮어씁니다." msgid "Pressure advance (Klipper) AKA Linear advance factor (Marlin)." msgstr "프레셔 어드밴스(Klipper) / 리니어 어드밴스(Marlin)" msgid "Enable adaptive pressure advance (beta)" msgstr "적응형 PA 활성화(베타)" #, no-c-format, no-boost-format msgid "" "With increasing print speeds (and hence increasing volumetric flow through the nozzle) and increasing accelerations, it has been observed that the effective PA value typically decreases. This means that a single PA value is not always 100% optimal for all features and a compromise value is usually used that does not cause too much bulging on features with lower flow speed and accelerations while also not causing gaps on faster features.\n" "\n" "This feature aims to address this limitation by modeling the response of your printer's extrusion system depending on the volumetric flow speed and acceleration it is printing at. Internally, it generates a fitted model that can extrapolate the needed pressure advance for any given volumetric flow speed and acceleration, which is then emitted to the printer depending on the current print conditions.\n" "\n" "When enabled, the pressure advance value above is overridden. However, a reasonable default value above is strongly recommended to act as a fallback and for when tool changing.\n" "\n" msgstr "" "출력 속도가 증가하고(노즐을 통한 압출 흐름이 증가함) 가속도가 증가함에 따라 일반적으로 유효 PA 값이 감소하는 것으로 관찰되었습니다. 이는 단일 PA 값이 모든 기능에 대해 항상 100% 최적인 것은 아니며 일반적으로 유속과 가속도가 낮은 기능에 너무 많은 돌출을 일으키지 않고 더 빠른 기능에 간격을 유발하지 않는 절충 값이 사용된다는 것을 의미합니다.\n" "\n" "이 기능은 출력 중인 압출 흐름 속도와 가속도에 따라 프린터 압출 시스템의 반응을 모델링하여 이러한 제한 사항을 해결하는 것을 목표로 합니다. 내부적으로는 주어진 압출 흐름 속도 및 가속도에 대해 필요한 PA를 추정할 수 있는 적합 모델을 생성하며, 이는 현재 출력 조건에 따라 프린터로 방출됩니다.\n" "\n" "활성화되면 위의 PA 값이 무시됩니다. 그러나 대체 수단으로 사용하거나 도구를 변경할 때 위의 합리적인 기본값을 사용하는 것이 좋습니다.\n" msgid "Adaptive pressure advance measurements (beta)" msgstr "적응형 PA 측정(베타)" #, no-c-format, no-boost-format msgid "" "Add sets of pressure advance (PA) values, the volumetric flow speeds and accelerations they were measured at, separated by a comma. One set of values per line. For example\n" "0.04,3.96,3000\n" "0.033,3.96,10000\n" "0.029,7.91,3000\n" "0.026,7.91,10000\n" "\n" "How to calibrate:\n" "1. Run the pressure advance test for at least 3 speeds per acceleration value. It is recommended that the test is run for at least the speed of the external perimeters, the speed of the internal perimeters and the fastest feature print speed in your profile (usually its the sparse or solid infill). Then run them for the same speeds for the slowest and fastest print accelerations, and no faster than the recommended maximum acceleration as given by the Klipper input shaper\n" "2. Take note of the optimal PA value for each volumetric flow speed and acceleration. You can find the flow number by selecting flow from the color scheme drop down and move the horizontal slider over the PA pattern lines. The number should be visible at the bottom of the page. The ideal PA value should be decreasing the higher the volumetric flow is. If it is not, confirm that your extruder is functioning correctly. The slower and with less acceleration you print, the larger the range of acceptable PA values. If no difference is visible, use the PA value from the faster test\n" "3. Enter the triplets of PA values, Flow and Accelerations in the text box here and save your filament profile." msgstr "" "PA 값 세트, 측정된 압출 압출량 속도 및 가속도를 쉼표로 구분하여 추가합니다. 한 줄에 하나의 값 세트가 있습니다. 예를 들어\n" "0.04,3.96,3000\n" "0.033,3.96,10000\n" "0.029,7.91,3000\n" "0.026,7.91,10000\n" "\n" "교정 방법:\n" "1. 가속도 값당 최소 3개 속도에 대해 PA 테스트를 실행합니다. 최소한 외부 둘레의 속도, 내부 둘레의 속도 및 프로필의 가장 빠른 기능 출력 속도(일반적으로 희박하거나 단단한 충전재)에 대해 테스트를 실행하는 것이 좋습니다. 그런 다음 가장 느리고 가장 빠른 출력 가속을 위해 동일한 속도로 실행하고 Klipper 입력 셰이퍼에서 제공하는 권장 최대 가속보다 빠르지 않게 실행하십시오.\n" "2. 각 압출 유속 및 가속도에 대한 최적의 PA 값을 기록해 두십시오. 색상 구성표 드롭다운에서 흐름을 선택하고 PA 패턴 라인 위로 수평 슬라이더를 이동하여 흐름 번호를 찾을 수 있습니다. 페이지 하단에 번호가 표시되어야 합니다. 이상적인 PA 값은 압출 압출량이 높을수록 감소해야 합니다. 그렇지 않은 경우 압출기가 올바르게 작동하는지 확인하십시오. 출력 속도가 느리고 가속도가 낮을수록 허용되는 PA 값의 범위는 더 커집니다. 차이가 보이지 않으면 더 빠른 테스트의 PA 값을 사용하십시오.\n" "3. 여기 텍스트 상자에 PA 값, 흐름 및 가속도의 세 가지 값을 입력하고 필라멘트 프로필을 저장하세요." # AI Translated msgid "Enable adaptive pressure advance within features (beta)" msgstr "기능 내부에서 적응형 PA 활성화(베타)" # AI Translated msgid "" "Enable adaptive PA whenever there are flow changes in a feature, such as line width changes in a corner or overhangs.\n" "\n" "Not compatible with Prusa printers as they pause to process PA changes, which causes delays and defects.\n" "\n" "This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues." msgstr "" "모서리에서의 선 너비 변화나 오버행처럼 하나의 기능 안에서 압출량이 변할 때마다 적응형 PA를 활성화합니다.\n" "\n" "Prusa 프린터는 PA 변경을 처리하기 위해 일시 정지하여 지연과 결함이 발생하므로 호환되지 않습니다.\n" "\n" "PA 프로필이 정확하게 설정되지 않으면 균일성 문제가 발생하므로 실험적인 옵션입니다." # AI Translated msgid "Static pressure advance for bridges" msgstr "브릿지용 정적 PA" # AI Translated msgid "" "Static pressure advance value for bridges. Set to 0 to apply the same pressure advance as \n" "equivalent walls (using adaptive settings if enabled).\n" "\n" "A lower PA value when printing bridges helps reduce the appearance of slight under-extrusion immediately after bridges. This is caused by the pressure drop in the nozzle when printing in the air and a lower PA helps counteract this." msgstr "" "브릿지에 사용할 정적 PA 값입니다. 0으로 설정하면 이에 상응하는 \n" "벽과 동일한 PA가 적용됩니다(활성화된 경우 적응형 설정 사용).\n" "\n" "브릿지를 출력할 때 PA 값을 낮추면 브릿지 직후에 나타나는 약간의 압출 부족 현상을 줄일 수 있습니다. 이는 공중에 출력할 때 노즐 내 압력이 떨어지기 때문이며, PA를 낮추면 이를 상쇄하는 데 도움이 됩니다." msgid "Default line width if other line widths are set to 0. If expressed as a %, it will be computed over the nozzle diameter." msgstr "다른 선 너비가 0으로 설정된 경우 기본 선 너비입니다. %로 입력 시 노즐 직경에 대한 비율로 계산됩니다." msgid "Keep fan always on" msgstr "팬 상시 가동" msgid "Enabling this setting means that part cooling fan will never stop entirely and will instead run at least at minimum speed to reduce the frequency of starting and stopping." msgstr "이 설정을 활성화하면 출력물 냉각 팬이 정지되지 않으며 팬을 최소 속도로 가동하여 시동 및 정지 빈도를 줄입니다" msgid "Don't slow down outer walls" msgstr "외벽에서 감속하지 않기" msgid "" "If enabled, this setting will ensure external perimeters are not slowed down to meet the minimum layer time. This is particularly helpful in the below scenarios:\n" "1. To avoid changes in shine when printing glossy filaments\n" "2. To avoid changes in external wall speed which may create slight wall artifacts that appear like Z banding\n" "3. To avoid printing at speeds which cause VFAs (fine artifacts) on the external walls" msgstr "" "활성화되면 최소 레이어 시간을 충족하기 위한 외벽의 출력 속도 감속을 적용하지 않습니다. 이 기능은 아래의 경우에 도움이 될 수 있습니다:\n" "1. 유광 필라멘트로 출력할 때 일정한 광택을 유지하기 위한 경우\n" "2. 외벽 출력 속도의 변화로 인한 외벽의 Z밴딩처럼 보이는 형상이 생성되는 것을 방지하기 위한 경우\n" "3. 외벽을 VFA를 발생시키는 속도로 출력하는 것을 방지하기 위한 경우" msgid "Layer time" msgstr "레이어 시간" msgid "The part cooling fan will be enabled for layers where the estimated time is shorter than this value. Fan speed is interpolated between the minimum and maximum fan speeds according to layer printing time." msgstr "예상 시간이 이 값보다 짧은 레이어에 대해 출력물 냉각 팬이 활성화됩니다. 팬 속도는 레이어 출력 시간에 따라 최소 및 최대 팬 속도 사이에서 보간됩니다" msgid "s" msgstr "s" msgid "Default color" msgstr "기본 색상" # AI Translated msgid "" "Default filament color.\n" "Right click to reset value to system default." msgstr "" "기본 필라멘트 색상입니다.\n" "마우스 오른쪽 버튼을 클릭하면 시스템 기본값으로 초기화됩니다." msgid "Filament notes" msgstr "필라멘트 메모" msgid "You can put your notes regarding the filament here." msgstr "여기에 필라멘트에 관한 메모를 할 수 있습니다." msgid "Required nozzle HRC" msgstr "필수 노즐 HRC" msgid "Minimum HRC of nozzle required to print the filament. A value of 0 means no checking of the nozzle's HRC." msgstr "필라멘트 출력에 필요한 노즐의 최소 HRC. 0은 노즐의 록웰 경도를 확인하지 않음을 의미합니다." msgid "Filament map to extruder" msgstr "압출기에 대한 필라멘트 맵" # AI Translated msgid "Filament map to extruder." msgstr "필라멘트를 압출기에 매핑합니다." msgid "Auto For Flush" msgstr "자동 플러시" msgid "Auto For Match" msgstr "자동 경기" msgid "Nozzle Manual" msgstr "노즐 설명서" msgid "Flush temperature" msgstr "플러시 온도" # AI Translated msgid "Temperature when flushing filament. 0 indicates the upper bound of the recommended nozzle temperature range." msgstr "필라멘트를 플러시할 때의 온도입니다. 0은 권장 노즐 온도 범위의 상한값을 의미합니다." # AI Translated msgid "Flush temperature used in fast purge mode." msgstr "고속 퍼지 모드에서 사용하는 플러시 온도입니다." msgid "Flush volumetric speed" msgstr "플러시 체적 속도" # AI Translated msgid "Volumetric speed when flushing filament. 0 indicates the max volumetric speed." msgstr "필라멘트를 플러시할 때의 압출 속도입니다. 0은 최대 압출 속도를 의미합니다." msgid "This setting is the volume of filament that can be melted and extruded per second. Printing speed is limited by max volumetric speed, in case of too high and unreasonable speed setting. This value cannot be zero." msgstr "이 설정은 초당 얼마나 많은 양의 필라멘트를 녹이고 압출할 수 있는지를 나타냅니다. 너무 높고 부적절한 속도 설정의 경우 출력 속도는 최대 압출 속도에 의해 제한됩니다. 0이 될 수 없습니다" msgid "Filament load time" msgstr "필라멘트 넣기 시간" msgid "Time to load new filament when switch filament. It's usually applicable for single-extruder multi-material machines. For tool changers or multi-tool machines, it's typically 0. For statistics only." msgstr "필라멘트를 교체할 때 새 필라멘트를 로드하는 시간입니다. 일반적으로 단일 압출기 다중 재료 기계에 적용 가능합니다. 공구 교환기 또는 다중 공구 기계의 경우 일반적으로 0입니다. 통계용으로만 사용됩니다" msgid "Filament unload time" msgstr "필라멘트 빼기 시간" msgid "Time to unload old filament when switch filament. It's usually applicable for single-extruder multi-material machines. For tool changers or multi-tool machines, it's typically 0. For statistics only." msgstr "필라멘트를 교체할 때 오래된 필라멘트를 언로드하는 시간입니다. 일반적으로 단일 압출기 다중 재료 기계에 적용 가능합니다. 공구 교환기 또는 다중 공구 기계의 경우 일반적으로 0입니다. 통계용으로만 사용됩니다" msgid "Tool change time" msgstr "툴 체인지 시간" msgid "Time taken to switch tools. It's usually applicable for tool changers or multi-tool machines. For single-extruder multi-material machines, it's typically 0. For statistics only." msgstr "툴 체인지를 전환하는 데 소요되는 시간입니다. 일반적으로 공구 교환기 또는 다중 공구 기계에 적용 가능합니다. 단일 압출기 다중 재료 기계의 경우 일반적으로 0입니다. 통계용으로만 사용됩니다" msgid "Bed temperature type" msgstr "베드 온도 유형" msgid "This option determines how the bed temperature is set during slicing: based on the temperature of the first filament or the highest temperature of the printed filaments." msgstr "이 옵션은 첫 번째 필라멘트의 온도 또는 출력된 필라멘트의 최고 온도에 따라 슬라이싱 중 베드 온도를 설정하는 방법을 결정합니다." msgid "By First filament" msgstr "By 첫 번째 필라멘트" msgid "By Highest Temp" msgstr "최고 온도 기준" msgid "Filament diameter is used to calculate extrusion variables in G-code, so it is important that this is accurate and precise." msgstr "필라멘트 직경은 Gcode에서 압출량을 계산하는데 사용되므로 중요하며 정확해야 합니다." msgid "Pellet flow coefficient" msgstr "펠릿 압출량 계수" msgid "" "Pellet flow coefficient is empirically derived and allows for volume calculation for pellet printers.\n" "\n" "Internally it is converted to filament_diameter. All other volume calculations remain the same.\n" "\n" "filament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )" msgstr "" "펠릿 압출량 계수는 경험적으로 추산되며 펠릿 프린터에서의 부피 계산에 사용됩니다.\n" "\n" "내부적으로 이 값은 filament_diameter로 변환됩니다. 다른 부피 계산은 영향을 받지 않습니다.\n" "\n" "filament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )" msgid "Adaptive volumetric speed" msgstr "적응형 볼륨 속도" # AI Translated msgid "" "When enabled, the extrusion flow is limited by the smaller of the fitted value (calculated from line width and layer height) and the user-defined maximum flow. When disabled, only the user-defined maximum flow is applied.\n" "\n" "Note: Experimental and incomplete feature imported from BBS. Functional for some profiles that already have the variable saved." msgstr "" "활성화하면 압출량이 (선 너비와 레이어 높이로 계산된) 피팅 값과 사용자 정의 최대 압출량 중 더 작은 값으로 제한됩니다. 비활성화하면 사용자 정의 최대 압출량만 적용됩니다.\n" "\n" "참고: BBS에서 가져온 실험적이고 미완성인 기능입니다. 해당 변수가 이미 저장된 일부 프로필에서만 작동합니다." msgid "Max volumetric speed multinomial coefficients" msgstr "최대 체적 속도 다항 계수" msgid "Shrinkage (XY)" msgstr "수축(XY)" # AI Translated #, no-c-format, no-boost-format msgid "" "Enter the shrinkage percentage that the filament will get after cooling (94% if you measure 94mm instead of 100mm). The part will be scaled in XY to compensate. For multi-material prints, ensure filament shrinkage matches across all used filaments\n" "Be sure to allow enough space between objects, as this compensation is done after the checks." msgstr "" "필라멘트가 냉각된 후의 수축률을 백분율로 입력하십시오(100mm 대신 94mm로 측정되면 94%). 이를 보정하기 위해 부품이 XY 방향으로 확대/축소됩니다. 다중 재료 출력에서는 사용하는 모든 필라멘트의 수축률이 서로 일치하는지 확인하십시오\n" "이 보정은 검사 이후에 수행되므로 객체 사이에 충분한 공간을 확보하십시오." msgid "Shrinkage (Z)" msgstr "수축(Z)" #, no-c-format, no-boost-format msgid "Enter the shrinkage percentage that the filament will get after cooling (94% if you measure 94mm instead of 100mm). The part will be scaled in Z to compensate." msgstr "냉각 후 필라멘트가 얻게 될 수축률을 입력합니다(100mm 대신 94mm를 측정하는 경우 94%). 보상을 위해 부품의 크기가 Z로 조정됩니다." msgid "Adhesiveness Category" msgstr "접착력 카테고리" # AI Translated msgid "Filament category." msgstr "필라멘트 분류입니다." msgid "Loading speed" msgstr "압출 속도" msgid "Speed used for loading the filament on the wipe tower." msgstr "프라임 타워에 필라멘트를 압출하는 데 사용되는 속도입니다." msgid "Loading speed at the start" msgstr "시작 시 압출 속도" msgid "Speed used at the very beginning of loading phase." msgstr "압출 단계 초기에 사용되는 속도입니다." msgid "Unloading speed" msgstr "언로드 속도" msgid "Speed used for unloading the filament on the wipe tower (does not affect initial part of unloading just after ramming)." msgstr "프라임 타워에 필라멘트를 빼는 데 사용되는 속도(채워넣기 직후 빼기 초기 부분에는 영향을 미치지 않음)" msgid "Unloading speed at the start" msgstr "시작시 언로드 속도" msgid "Speed used for unloading the tip of the filament immediately after ramming." msgstr "채워넣기 직후 필라멘트 끝을 빼는 데 사용되는 속도입니다." msgid "Delay after unloading" msgstr "언로드 후 지연" msgid "Time to wait after the filament is unloaded. May help to get reliable tool changes with flexible materials that may need more time to shrink to original dimensions." msgstr "필라멘트를 뺀 후 기다리는 시간입니다. 원래 치수로 축소되는 데 더 많은 시간이 필요할 수 있는 유연한 재료 사용 시 안정적으로 툴 체인지를 할 수 있게 도움이 될 수 있습니다." msgid "Number of cooling moves" msgstr "냉각 이동 횟수" msgid "Filament is cooled by being moved back and forth in the cooling tubes. Specify desired number of these moves." msgstr "필라멘트는 냉각 튜브 내에서 앞뒤로 움직이면서 냉각됩니다. 원하는 이동 횟수를 지정하세요." msgid "Stamping loading speed" msgstr "스탬핑 로딩 속도" msgid "Speed used for stamping." msgstr "스탬핑에 사용되는 속도." msgid "Stamping distance measured from the center of the cooling tube" msgstr "냉각 튜브 중심에서 측정한 스탬핑 거리" msgid "If set to non-zero value, filament is moved toward the nozzle between the individual cooling moves (\"stamping\"). This option configures how long this movement should be before the filament is retracted again." msgstr "0이 아닌 값으로 설정되면 개별 냉각 이동(\"스탬핑\") 사이에 필라멘트가 노즐을 향해 이동합니다. 이 옵션은 필라멘트가 다시 수축되기 전에 이 움직임이 얼마나 오래 지속되어야 하는지를 구성합니다." msgid "Speed of the first cooling move" msgstr "첫 번째 냉각 이동 속도" msgid "Cooling moves are gradually accelerating beginning at this speed." msgstr "이 속도부터 냉각 동작이 점차 가속됩니다." msgid "Minimal purge on wipe tower" msgstr "프라임 타워의 최소 청소" msgid "After a tool change, the exact position of the newly loaded filament inside the nozzle may not be known, and the filament pressure is likely not yet stable. Before purging the print head into an infill or a sacrificial object, Orca Slicer will always prime this amount of material into the wipe tower to produce successive infill or sacrificial object extrusions reliably." msgstr "툴 체인지 후 노즐 내부에 새로 로드된 필라멘트의 정확한 위치를 알 수 없으며 필라멘트 압력이 아직 안정적이지 않을 수 있습니다. 프린트 헤드를 채우기 또는 희생 객체로 청소하기 전에 Orca Slicer은 항상 이 양의 재료를 프라임 타워로 프라이밍하여 연속적인 채우기 또는 희생 물체 압출을 안정적으로 생성합니다." msgid "Wipe tower cooling" msgstr "와이프 타워 냉각" msgid "Temperature drop before entering filament tower" msgstr "필라멘트 타워 진입 전 온도 강하" msgid "Interface layer pre-extrusion distance" msgstr "인터페이스 레이어 사전 압출 거리" msgid "Pre-extrusion distance for prime tower interface layer (where different materials meet)." msgstr "프라임 타워 인터페이스 레이어(서로 다른 재료가 만나는 부분)의 사전 압출 거리." msgid "Interface layer pre-extrusion length" msgstr "인터페이스 레이어 사전 압출 길이" msgid "Pre-extrusion length for prime tower interface layer (where different materials meet)." msgstr "프라임 타워 인터페이스 레이어(서로 다른 재료가 만나는 부분)의 사전 압출 길이." msgid "Tower ironing area" msgstr "타워 다림질 영역" msgid "Ironing area for prime tower interface layer (where different materials meet)." msgstr "프라임 타워 인터페이스 레이어(서로 다른 재료가 만나는 부분)의 다림질 영역." msgid "mm²" msgstr "mm²" msgid "Interface layer purge length" msgstr "인터페이스 레이어 퍼지 길이" msgid "Purge length for prime tower interface layer (where different materials meet)." msgstr "프라임 타워 인터페이스 레이어(서로 다른 재료가 만나는 부분)의 퍼지 길이." msgid "Interface layer print temperature" msgstr "인터페이스 레이어 출력 온도" msgid "Print temperature for prime tower interface layer (where different materials meet). If set to -1, use max recommended nozzle temperature." msgstr "서로 다른 재료가 만나는 프라임 타워 인터페이스 층의 출력 온도입니다. -1로 설정하면 권장 최대 노즐 온도를 사용합니다." msgid "Speed of the last cooling move" msgstr "마지막 냉각 이동 속도" msgid "Cooling moves are gradually accelerating towards this speed." msgstr "냉각 동작은 이 속도를 향해 점진적으로 감속됩니다." msgid "Ramming parameters" msgstr "채워넣기 매개변수" msgid "This string is edited by RammingDialog and contains ramming specific parameters." msgstr "이 문자열은 채워넣기 다이얼로그에 의해 편집되며 채워넣기 관련 매개변수를 포함합니다." msgid "Enable ramming for multi-tool setups" msgstr "다중 압출기 설정을 위한 채워넣기 활성화" msgid "Perform ramming when using multi-tool printer (i.e. when the 'Single Extruder Multimaterial' in Printer Settings is unchecked). When checked, a small amount of filament is rapidly extruded on the wipe tower just before the tool change. This option is only used when the wipe tower is enabled." msgstr "다중 압출기 프린터를 사용할 때 채워넣기를 수행합니다(예: 프린터 설정에서 '단일 압출기 다중 재료'가 선택 취소된 경우). 활성화하면 툴 체인지 직전 프라임 타워에 소량의 필라멘트가 빠르게 압출됩니다. 이 옵션은 프라임 타워가 활성화된 경우에만 사용됩니다." msgid "Multi-tool ramming volume" msgstr "다중 압출기 채워넣기 부피" msgid "The volume to be rammed before the tool change." msgstr "툴 체인지 전에 채워넣을 양 입니다." msgid "Multi-tool ramming flow" msgstr "다중 압출기 채워넣기 압출량" msgid "Flow used for ramming the filament before the tool change." msgstr "툴 체인지 전에 필라멘트를 채워넣기에 사용되는 압출량입니다." msgid "Density" msgstr "밀도" msgid "Filament density, for statistical purposes only." msgstr "필라멘트 밀도. 통계 전용" msgid "g/cm³" msgstr "g/cm³" msgid "Filament material type" msgstr "필라멘트의 재료 유형" msgid "Soluble material" msgstr "가용성 재료" msgid "Soluble material is commonly used to print supports and support interfaces." msgstr "가용성 재료는 일반적으로 서포트 및 서포트 접점을 출력하는 데 사용됩니다" msgid "Filament ramming length" msgstr "필라멘트 충돌 길이" msgid "When changing the extruder, it is recommended to extrude a certain length of filament from the original extruder. This helps minimize nozzle oozing." msgstr "압출기를 교체할 때는 원래 압출기에서 일정 길이의 필라멘트를 압출하는 것이 좋습니다. 이렇게 하면 노즐 흘러내림을 최소화할 수 있습니다." msgid "Support material" msgstr "서포트 재료" msgid "Support material is commonly used to print supports and support interfaces." msgstr "서포트 재료는 일반적으로 서포트 및 서포트 접점을 출력하는 데 사용됩니다" msgid "Filament printable" msgstr "필라멘트 출력 가능" # AI Translated msgid "The filament is printable in extruder." msgstr "이 필라멘트를 해당 압출기에서 출력할 수 있습니다." # AI Translated msgid "Filament-extruder compatibility" msgstr "필라멘트-압출기 호환성" # AI Translated msgid "A single 32-bit int encoding the compatibility level of a filament across all extruders (up to 10). Every 3 bits represent one extruder (bits [3*i, 3*i+2] for extruder i). 0: printable, 1: error, 2: critical warning, 3: warning, 4-7: reserved." msgstr "모든 압출기(최대 10개)에 대한 필라멘트 호환 수준을 하나의 32비트 정수로 인코딩합니다. 3비트마다 압출기 하나를 나타냅니다(압출기 i의 경우 비트 [3*i, 3*i+2]). 0: 출력 가능, 1: 오류, 2: 심각 경고, 3: 경고, 4-7: 예약됨." msgid "Softening temperature" msgstr "연화 온도" msgid "The material softens at this temperature, so when the bed temperature is equal to or greater than this, it's highly recommended to open the front door and/or remove the upper glass to avoid clogs." msgstr "이 온도에서는 재료가 부드러워지므로 베드 온도가 이 온도 이상일 경우 막힘을 방지하기 위해 전면 도어를 열거나 상단 유리를 제거하는 것이 좋습니다." msgid "Price" msgstr "가격" msgid "Filament price, for statistical purposes only." msgstr "필라멘트 가격. 통계 전용" msgid "money/kg" msgstr "가격/kg" msgid "Vendor" msgstr "제조사" msgid "Vendor of filament. For show only." msgstr "필라멘트 제조사" msgid "(Undefined)" msgstr "(정의되지 않음)" msgid "Sparse infill direction" msgstr "드문 채우기 방향" msgid "This is the angle for sparse infill pattern, which controls the start or main direction of lines." msgstr "선의 시작 또는 주 방향을 제어하는 드문 채우기 패턴에 대한 각도" msgid "Solid infill direction" msgstr "꽉찬 채우기 방향" msgid "Angle for solid infill pattern, which controls the start or main direction of line." msgstr "선의 시작 또는 기본 방향을 제어하는 솔리드 채우기 패턴의 각도" # AI Translated msgid "Top layer direction" msgstr "상단 레이어 방향" # AI Translated msgid "" "Fixed angle for the top solid infill and ironing lines.\n" "Set to -1 to follow the default solid infill direction." msgstr "" "상단 꽉찬 채우기 및 다림질 선의 고정 각도입니다.\n" "-1로 설정하면 기본 꽉찬 채우기 방향을 따릅니다." # AI Translated msgid "Bottom layer direction" msgstr "하단 레이어 방향" # AI Translated msgid "" "Fixed angle for the bottom solid infill lines.\n" "Set to -1 to follow the default solid infill direction." msgstr "" "하단 꽉찬 채우기 선의 고정 각도입니다.\n" "-1로 설정하면 기본 꽉찬 채우기 방향을 따릅니다." msgid "Sparse infill density" msgstr "드문 채우기 밀도" #, no-c-format, no-boost-format msgid "Density of internal sparse infill, 100% turns all sparse infill into solid infill and internal solid infill pattern will be used." msgstr "내부 드문 채우기의 밀도, 100%는 모든 드문 채우기를 꽉찬 내부 채우기로 변경하고 채우기에는 패턴이 사용됩니다" # AI Translated msgid "Align directions to model" msgstr "방향을 모델에 정렬" # AI Translated msgid "" "Aligns infill, bridge, ironing, and top/bottom surface directions to follow the model's orientation on the build plate.\n" "When enabled, these directions rotate together with the model so the printed features keep their intended orientation relative to the part, preserving optimal strength and surface characteristics regardless of how the model is placed." msgstr "" "채우기, 브릿지, 다림질 및 상하단 표면 방향을 빌드 플레이트 위 모델의 방향에 맞춰 정렬합니다.\n" "활성화하면 이러한 방향이 모델과 함께 회전하므로, 모델을 어떻게 배치하더라도 출력되는 형상이 부품을 기준으로 의도한 방향을 유지하여 최적의 강도와 표면 특성이 보존됩니다." # AI Translated msgid "Insert solid layers" msgstr "꽉찬 레이어 삽입" # AI Translated msgid "Insert solid infill at specific layers. Use N to insert every Nth layer, N#K to insert K consecutive solid layers every N layers (K is optional, e.g. '5#' equals '5#1'), or a comma-separated list (e.g. 1,7,9) to insert at explicit layers. Layers are 1-based." msgstr "특정 레이어에 꽉찬 채우기를 삽입합니다. N을 사용하면 N번째 레이어마다 삽입하고, N#K를 사용하면 N개 레이어마다 연속된 K개의 꽉찬 레이어를 삽입하며(K는 선택 사항으로, 예를 들어 '5#'는 '5#1'과 같습니다), 쉼표로 구분된 목록(예: 1,7,9)을 사용하면 지정한 레이어에 삽입합니다. 레이어 번호는 1부터 시작합니다." # AI Translated msgid "Fill Multiline" msgstr "다중 선 채우기" msgid "Using multiple lines for the infill pattern, if supported by infill pattern." msgstr "채우기 패턴에서 지원되는 경우 채우기 패턴에 여러 줄을 사용합니다." # AI Translated msgid "Z-buckling bias optimization (experimental)" msgstr "Z축 좌굴 편향 최적화(실험적)" # AI Translated #, no-c-format, no-boost-format msgid "Tightens the gyroid wave along the Z (vertical) axis at low infill density to shorten the effective vertical column length and improve Z-axis compression buckling resistance. Filament use is preserved. No effect at ~30% sparse infill density and above. Only applies when Sparse infill pattern is set to Gyroid." msgstr "채우기 밀도가 낮을 때 Z(수직)축을 따라 자이로이드 파형을 조밀하게 만들어 유효 수직 기둥 길이를 줄이고 Z축 압축 좌굴 저항을 향상시킵니다. 필라멘트 사용량은 그대로 유지됩니다. 드문 채우기 밀도가 약 30% 이상이면 효과가 없습니다. 드문 채우기 패턴이 자이로이드로 설정된 경우에만 적용됩니다." msgid "Sparse infill pattern" msgstr "드문 채우기 패턴" msgid "This is the line pattern for internal sparse infill." msgstr "드문 내부 채우기의 선 패턴" msgid "Zig Zag" msgstr "지그재그" msgid "Cross Zag" msgstr "크로스 재그" msgid "Locked Zag" msgstr "잠긴 재그" msgid "Line" msgstr "선" msgid "Grid" msgstr "격자" msgid "Tri-hexagon" msgstr "삼각-육각형" msgid "Cubic" msgstr "정육면체" msgid "Adaptive Cubic" msgstr "적응형 정육면체" msgid "Quarter Cubic" msgstr "쿼터 큐빅" msgid "Support Cubic" msgstr "정육면체 서포트" msgid "Lightning" msgstr "번개" msgid "Honeycomb" msgstr "벌집" msgid "3D Honeycomb" msgstr "3D 벌집" # AI Translated msgid "Lateral Honeycomb" msgstr "측면 벌집" msgid "Lateral Lattice" msgstr "2D 격자" msgid "Cross Hatch" msgstr "크로스 해치" msgid "TPMS-D" msgstr "TPMS-D" msgid "TPMS-FK" msgstr "TPMS-FK" msgid "Gyroid" msgstr "자이로이드" msgid "This is the acceleration of top surface infill. Using a lower value may improve top surface quality." msgstr "상단 표면 가속도. 낮은 값을 사용하면 상단 표면 품질이 향상될 수 있습니다" msgid "Acceleration of outer wall: using a lower value can improve quality." msgstr "외벽의 가속도. 낮은 값을 사용하면 품질이 향상 될 수 있습니다" msgid "Acceleration of inner walls." msgstr "내벽의 가속도" msgid "Acceleration of sparse infill. If the value is expressed as a percentage (e.g. 100%), it will be calculated based on the default acceleration." msgstr "드문 채우기 가속도. 값이 백분율 (예. 100%)로 표시되면 기본 가속도를 기준으로 계산됩니다." msgid "Acceleration of internal solid infill. If the value is expressed as a percentage (e.g. 100%), it will be calculated based on the default acceleration." msgstr "꽉찬 내부 채우기 가속도. 값이 백분율 (예. 100%)로 표시되면 기본 가속도를 기준으로 계산됩니다." msgid "This is the printing acceleration for the first layer. Using limited acceleration can improve build plate adhesion." msgstr "초기 레이어 가속도. 낮은 값을 사용하면 빌드 플레이트 안착률을 높일 수 있습니다" msgid "Enable accel_to_decel" msgstr "가속/감속 활성화" msgid "Klipper's max_accel_to_decel will be adjusted automatically." msgstr "Klipper의 max_accel_to_decel은 자동으로 조정됩니다" msgid "accel_to_decel" msgstr "가속/감속" #, c-format, boost-format msgid "Klipper's max_accel_to_decel will be adjusted to this %% of acceleration." msgstr "Klipper의 max_accel_to_decel은 가속도의 %%로 조정됩니다" # AI Translated msgid "Default jerk." msgstr "기본 저크입니다." # AI Translated msgid "Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)." msgstr "Marlin 펌웨어의 Junction Deviation입니다(기존 XY 저크 설정을 대체합니다)." msgid "Jerk of outer walls." msgstr "외벽 저크" msgid "Jerk of inner walls." msgstr "내벽 저크" msgid "Jerk for top surface." msgstr "상단 표면 저크" msgid "Jerk for infill." msgstr "채우기 저크" msgid "Jerk for the first layer." msgstr "초기 레이어 저크" msgid "Jerk for travel." msgstr "이동 저크" # AI Translated msgid "" "Travel jerk of first layer.\n" "The percentage value is relative to Travel Jerk." msgstr "" "초기 레이어의 이동 저크입니다.\n" "백분율 값은 이동 저크를 기준으로 합니다." msgid "Line width of the first layer. If expressed as a %, it will be computed over the nozzle diameter." msgstr "초기 레이어의 선 너비. %로 입력 시 노즐 직경에 대한 비율로 계산됩니다." msgid "First layer height" msgstr "초기 레이어 높이" msgid "Height of the first layer. Making the first layer height thicker can improve build plate adhesion." msgstr "초기 레이어의 높이입니다. 초기 레이어 높이를 약간 두껍게 하면 빌드 플레이트 접착력을 향상시킬 수 있습니다" msgid "This is the speed for the first layer except for solid infill sections." msgstr "꽉찬 채우기 부분을 제외한 초기 레이어 속도" msgid "First layer infill" msgstr "초기 레이어 채우기" msgid "This is the speed for solid infill parts of the first layer." msgstr "초기 레이어의 꽉찬 채우기 속도" msgid "First layer travel speed" msgstr "초기 레이어 이동 속도" msgid "Travel speed of the first layer." msgstr "초기 레이어 이동 속도" # AI Translated msgid "Number of slow layers" msgstr "저속 레이어 수" msgid "The first few layers are printed slower than normal. The speed is gradually increased in a linear fashion over the specified number of layers." msgstr "처음 몇 개의 레이어는 평소보다 느리게 출력됩니다. 속도는 지정된 레이어 수에 걸쳐 선형 방식으로 점차 증가합니다." msgid "First layer nozzle temperature" msgstr "초기 레이어 노즐 온도" msgid "Nozzle temperature for printing the first layer with this filament" msgstr "이 필라멘트를 사용할 때 초기 레이어를 출력하기 위한 노즐 온도" msgid "Full fan speed at layer" msgstr "팬 최대 속도 레이어" msgid "Fan speed will be ramped up linearly from zero at layer \"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower than \"close_fan_the_first_x_layers\", in which case the fan will be running at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "팬 속도는 \"close_fan_the_first_x_layers\" 의 0에서 \"full_fan_speed_layer\" 의 최고 속도까지 선형적으로 증가합니다. \"full_fan_speed_layer\"가 \"close_fan_the_first_x_layers\"보다 낮으면 무시되며, 이 경우 팬은 \"close_fan_the_first_x_layers\" + 1 에서 최대 허용 속도로 가도됩니다." msgid "layer" msgstr "레이어" # AI Translated msgid "First layer fan speed" msgstr "초기 레이어 팬 속도" # AI Translated msgid "" "Sets an exact fan speed for the first layer, overriding all other cooling settings. Useful for protecting 3D-printed toolhead parts (e.g. Voron-style ABS/ASA ducts) from a hot bed. A small amount of airflow cools the ducts down, without using full cooling that may in certain conditions hurt first-layer adhesion.\n" "From the second layer onwards, normal cooling resumes.\n" "If \"Full fan speed at layer\" is also set, the fan ramps smoothly from this value on the first layer up to your target by the chosen layer.\n" "Only available when \"No cooling for the first\" is 0.\n" "Set to -1 to disable it." msgstr "" "다른 모든 냉각 설정을 무시하고 초기 레이어의 팬 속도를 정확히 지정합니다. 뜨거운 베드로부터 3D 출력된 툴헤드 부품(예: Voron 방식의 ABS/ASA 덕트)을 보호하는 데 유용합니다. 약간의 바람만으로 덕트를 식힐 수 있어, 특정 조건에서 초기 레이어 접착을 해칠 수 있는 최대 냉각을 사용하지 않아도 됩니다.\n" "두 번째 레이어부터는 일반 냉각이 다시 적용됩니다.\n" "\"팬 최대 속도 레이어\"도 설정되어 있으면 팬은 초기 레이어의 이 값에서 선택한 레이어의 목표값까지 부드럽게 상승합니다.\n" "\"초기 냉각 없음\" 값이 0인 경우에만 사용할 수 있습니다.\n" "-1로 설정하면 비활성화됩니다." msgid "Support interface fan speed" msgstr "서포트 접점 팬 속도" msgid "" "This part cooling fan speed is applied when printing support interfaces. Setting this parameter to a higher than regular speed reduces the layer binding strength between supports and the supported part, making them easier to separate.\n" "Set to -1 to disable it.\n" "This setting is overridden by disable_fan_first_layers." msgstr "" "이 파트 냉각 팬 속도는 서포트 인터페이스를 출력할 때 적용됩니다. 이 파라미터를 일반 속도보다 높게 설정하면 서포트와 서포트 파트 사이의 레이어 결합 강도가 감소하여 쉽게 분리할 수 있습니다.\n" "비활성화하려면 -1로 설정합니다.\n" "이 설정은 disable_fan_first_layers로 재정의됩니다." msgid "Internal bridges fan speed" msgstr "내부 브릿지 팬 속도" msgid "" "The part cooling fan speed used for all internal bridges. Set to -1 to use the overhang fan speed settings instead.\n" "\n" "Reducing the internal bridges fan speed, compared to your regular fan speed, can help reduce part warping due to excessive cooling applied over a large surface for a prolonged period of time." msgstr "" "모든 내부 브릿지에 사용되는 부품 냉각 팬 속도입니다. 오버행 팬 속도 설정을 대신 사용하려면 -1로 설정합니다.\n" "\n" "내부 브릿지 팬 속도를 일반 팬 속도보다 낮추면 넓은 표면에 장시간 과도한 냉각이 가해져 파트가 뒤틀리는 현상을 줄일 수 있습니다." msgid "Ironing fan speed" msgstr "다림질 속도" # AI Translated msgid "" "This part cooling fan speed is applied when ironing. Setting this parameter to a lower than regular speed reduces possible nozzle clogging due to the low volumetric flow rate, making the interface smoother.\n" "Set to -1 to disable it." msgstr "" "다림질할 때 적용되는 출력물 냉각 팬 속도입니다. 이 값을 일반 속도보다 낮게 설정하면 낮은 체적 유량으로 인한 노즐 막힘 가능성이 줄고 표면이 더 매끄러워집니다.\n" "-1로 설정하면 비활성화됩니다." msgid "Ironing flow" msgstr "다림질 압출량" # AI Translated msgid "Filament-specific override for ironing flow. This allows you to customize the ironing flow for each filament type. Too high value results in overextrusion on the surface." msgstr "다림질 압출량에 대한 필라멘트별 재정의입니다. 필라멘트 유형마다 다림질 압출량을 지정할 수 있습니다. 값이 너무 크면 표면에 과압출이 발생합니다." msgid "Ironing line spacing" msgstr "다림질 선 간격" # AI Translated msgid "Filament-specific override for ironing line spacing. This allows you to customize the spacing between ironing lines for each filament type." msgstr "다림질 선 간격에 대한 필라멘트별 재정의입니다. 필라멘트 유형마다 다림질 선 사이의 간격을 지정할 수 있습니다." msgid "Ironing inset" msgstr "다림질 삽입" # AI Translated msgid "Filament-specific override for ironing inset. This allows you to customize the distance to keep from the edges when ironing for each filament type." msgstr "다림질 삽입 거리에 대한 필라멘트별 재정의입니다. 필라멘트 유형마다 다림질할 때 가장자리에서 띄울 거리를 지정할 수 있습니다." msgid "Ironing speed" msgstr "다림질 속도" # AI Translated msgid "Filament-specific override for ironing speed. This allows you to customize the print speed of ironing lines for each filament type." msgstr "다림질 속도에 대한 필라멘트별 재정의입니다. 필라멘트 유형마다 다림질 선의 출력 속도를 지정할 수 있습니다." msgid "This setting makes the toolhead randomly jitter while printing walls so that the surface has a rough textured look. This setting controls the fuzzy position." msgstr "벽을 출력하는 동안 무작위로 지터가 발생하여 표면이 거칠게 보입니다. 이 설정은 퍼지 위치를 제어합니다" msgid "Painted only" msgstr "도색만" msgid "Contour" msgstr "윤곽" msgid "Hole" msgstr "구멍" msgid "Contour and hole" msgstr "윤곽 및 구멍" msgid "All walls" msgstr "모든 벽" msgid "Fuzzy skin thickness" msgstr "퍼지 스킨 두께" msgid "The width of jittering: it’s recommended to keep this lower than the outer wall line width." msgstr "임의로 움직일 너비입니다. 외벽 선 너비 보다 얇게 하는 것이 좋습니다" msgid "Fuzzy skin point distance" msgstr "퍼지 스킨 지점 거리" msgid "The average distance between the random points introduced on each line segment." msgstr "각 선의 분절에 도입된 임의의 지점간 평균 거리" msgid "Apply fuzzy skin to first layer" msgstr "첫 번째 레이어에 퍼지 스킨 적용" msgid "Whether to apply fuzzy skin on the first layer." msgstr "첫 번째 레이어에 퍼지 스킨을 적용할지 여부" msgid "Fuzzy skin generator mode" msgstr "솜털 스킨 생성기 모드" # AI Translated #, c-format, boost-format msgid "" "Fuzzy skin generation mode. Works only with Arachne!\n" "Displacement: Сlassic mode when the pattern is formed by shifting the nozzle sideways from the original path.\n" "Extrusion: The mode when the pattern formed by the amount of extruded plastic. This is the fast and straight algorithm without unnecessary nozzle shake that gives a smooth pattern. But it is more useful for forming loose walls in the entire they array.\n" "Combined: Joint mode [Displacement] + [Extrusion]. The appearance of the walls is similar to [Displacement] Mode, but it leaves no pores between the perimeters.\n" "\n" "Attention! The [Extrusion] and [Combined] modes works only the fuzzy_skin_thickness parameter not more than the thickness of printed loop. At the same time, the width of the extrusion for a particular layer should also not be below a certain level. It is usually equal 15-25%% of a layer height. Therefore, the maximum fuzzy skin thickness with a perimeter width of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! If you enter a higher parameter than this, the error Flow::spacing() will displayed, and the model will not be sliced. You can choose this number until this error is repeated." msgstr "" "퍼지 스킨 생성 모드입니다. Arachne에서만 작동합니다!\n" "변위: 원래 경로에서 노즐을 옆으로 이동시켜 패턴을 만드는 고전적인 모드입니다.\n" "압출: 압출되는 플라스틱의 양으로 패턴을 만드는 모드입니다. 불필요한 노즐 흔들림 없이 빠르고 직선적인 알고리즘으로 매끄러운 패턴을 만듭니다. 다만 벽 전체를 느슨하게 형성하는 데 더 적합합니다.\n" "결합: [변위] + [압출]의 혼합 모드입니다. 벽의 외관은 [변위] 모드와 비슷하지만 둘레 사이에 구멍이 남지 않습니다.\n" "\n" "주의! [압출] 및 [결합] 모드는 fuzzy_skin_thickness 매개변수가 출력되는 루프의 두께를 넘지 않을 때만 작동합니다. 동시에 특정 레이어의 압출 너비도 일정 수준 아래로 내려가서는 안 되며, 이는 일반적으로 레이어 높이의 15-25%%에 해당합니다. 따라서 둘레 너비가 0.4 mm이고 레이어 높이가 0.2 mm인 경우 최대 퍼지 스킨 두께는 0.4-(0.2*0.25)=±0.35mm가 됩니다! 이보다 큰 값을 입력하면 Flow::spacing() 오류가 표시되고 모델이 슬라이스되지 않습니다. 이 오류가 반복되지 않을 때까지 값을 조정할 수 있습니다." msgid "Displacement" msgstr "배수량" msgid "Extrusion" msgstr "압출" msgid "Combined" msgstr "결합" msgid "Fuzzy skin noise type" msgstr "퍼지 스킨 노이즈 유형" # AI Translated msgid "" "Noise type to use for fuzzy skin generation:\n" "Classic: Classic uniform random noise.\n" "Perlin: Perlin noise, which gives a more consistent texture.\n" "Billow: Similar to perlin noise, but clumpier.\n" "Ridged Multifractal: Ridged noise with sharp, jagged features. Creates marble-like textures.\n" "Voronoi: Divides the surface into voronoi cells, and displaces each one by a random amount. Creates a patchwork texture.\n" "Ripple: Uniform ripple pattern that ripples left and right of the original path. Repeating pattern, woven appearance." msgstr "" "퍼지 스킨 생성에 사용할 노이즈 유형입니다:\n" "클래식: 고전적인 균일 무작위 노이즈입니다.\n" "펄린: 펄린 노이즈로, 더 일관된 질감을 만듭니다.\n" "빌로우: 펄린 노이즈와 비슷하지만 더 뭉쳐 있습니다.\n" "리지드 멀티프랙탈: 날카롭고 들쭉날쭉한 형태의 능선형 노이즈입니다. 대리석 같은 질감을 만듭니다.\n" "보로노이: 표면을 보로노이 셀로 나누고 각 셀을 무작위 크기만큼 변위시킵니다. 조각보 같은 질감을 만듭니다.\n" "Ripple: 원래 경로의 좌우로 물결치는 균일한 물결 패턴입니다. 반복되는 패턴으로 짜임 같은 외관을 만듭니다." msgid "Classic" msgstr "클래식" msgid "Perlin" msgstr "펄린" msgid "Billow" msgstr "빌로우" msgid "Ridged Multifractal" msgstr "리지드 멀티프랙탈" msgid "Voronoi" msgstr "보로노이" msgid "Ripple" msgstr "Ripple" msgid "Fuzzy skin feature size" msgstr "퍼지 스킨 피처 크기" msgid "The base size of the coherent noise features, in mm. Higher values will result in larger features." msgstr "코히어런트 노이즈 피처의 기본 크기(mm)입니다. 값이 클수록 피처가 커집니다." msgid "Fuzzy Skin Noise Octaves" msgstr "퍼지 스킨 노이즈 옥타브" msgid "The number of octaves of coherent noise to use. Higher values increase the detail of the noise, but also increase computation time." msgstr "사용할 일관된 노이즈의 옥타브 수입니다. 값이 클수록 노이즈의 디테일이 증가하지만 계산 시간도 늘어납니다." msgid "Fuzzy skin noise persistence" msgstr "퍼지 스킨 노이즈 지속성" msgid "The decay rate for higher octaves of the coherent noise. Lower values will result in smoother noise." msgstr "코히어런트 노이즈의 높은 옥타브에 대한 감쇠율입니다. 값이 낮을수록 노이즈가 더 부드러워집니다." # AI Translated msgid "Number of ripples per layer" msgstr "레이어당 물결 수" # AI Translated msgid "Controls how many full cycles of ripples will be added per layer." msgstr "레이어당 추가될 물결의 전체 주기 수를 제어합니다." # AI Translated msgid "Ripple offset" msgstr "Ripple 오프셋" # AI Translated msgid "" "Shifts the ripple phase forward along the print path by the specified percentage of a wavelength each layer period.\n" "- 0% keeps every layer identical.\n" "- 50% shifts the pattern by half a wavelength, effectively inverting the phase.\n" "- 100% shifts the pattern by a full wavelength, returning to the original phase.\n" "\n" "The shift is applied once every number of layers set by Layers between ripple offset, so layers within the same group are printed identically." msgstr "" "각 레이어 주기마다 지정한 파장 백분율만큼 출력 경로를 따라 물결의 위상을 앞으로 이동시킵니다.\n" "- 0%는 모든 레이어를 동일하게 유지합니다.\n" "- 50%는 패턴을 반 파장만큼 이동시켜 사실상 위상을 반전시킵니다.\n" "- 100%는 패턴을 한 파장만큼 이동시켜 원래 위상으로 되돌립니다.\n" "\n" "이 이동은 \"Ripple 오프셋 간 레이어 수\"에 설정된 레이어 수마다 한 번씩 적용되므로, 같은 그룹 안의 레이어는 동일하게 출력됩니다." # AI Translated msgid "Layers between ripple offset" msgstr "Ripple 오프셋 간 레이어 수" # AI Translated msgid "" "Specifies how many consecutive layers share the same ripple phase before the offset is applied.\n" "For example:\n" "- 1 = Layer 1 is printed with the base ripple pattern, then layer 2 is shifted by the configured offset, then layer 3 returns to the base pattern, and so on.\n" "- 3 = Layers 1 to 3 are printed with the base ripple pattern, then layers 4 to 6 are shifted by the configured offset, then layers 7 to 9 return to the base pattern, etc." msgstr "" "오프셋이 적용되기 전에 몇 개의 연속된 레이어가 동일한 물결 위상을 공유할지 지정합니다.\n" "예를 들어:\n" "- 1 = 레이어 1은 기본 물결 패턴으로 출력되고, 레이어 2는 설정한 오프셋만큼 이동하며, 레이어 3은 다시 기본 패턴으로 돌아가는 식입니다.\n" "- 3 = 레이어 1~3은 기본 물결 패턴으로 출력되고, 레이어 4~6은 설정한 오프셋만큼 이동하며, 레이어 7~9는 다시 기본 패턴으로 돌아갑니다." msgid "Filter out tiny gaps" msgstr "작은 간격 필터링" msgid "Layers and Perimeters" msgstr "레이어와 윤곽선" msgid "Don't print gap fill with a length is smaller than the threshold specified (in mm). This setting applies to top, bottom and solid infill and, if using the classic perimeter generator, to wall gap fill." msgstr "지정된 임계값(mm 단위)보다 길이가 작은 간격 채우기를 출력하지 마십시오. 이 설정은 상단, 하단 및 솔리드 채우기에 적용되며, 클래식 주변 생성기를 사용하는 경우 벽 간격 채우기에 적용됩니다." msgid "This is the speed for gap infill. Gaps usually have irregular line width and should be printed more slowly." msgstr "간격 채우기 속도. 간격은 일반적으로 선 너비가 불규칙하므로 더 천천히 출력해야 합니다" msgid "Precise Z height" msgstr "정확한 Z 높이" msgid "Enable this to get precise Z height of object after slicing. It will get the precise object height by fine-tuning the layer heights of the last few layers. Note that this is an experimental parameter." msgstr "슬라이싱 후 객체의 정확한 z 높이를 얻으려면 이 옵션을 활성화하세요. 마지막 몇 레이어의 레이어 높이를 미세 조정하여 정확한 객체 높이를 얻습니다. 이는 실험적인 매개변수입니다." msgid "Arc fitting" msgstr "원호 맞춤" msgid "" "Enable this to get a G-code file which has G2 and G3 moves. The fitting tolerance is same as the resolution.\n" "\n" "Note: For Klipper machines, this option is recommended to be disabled. Klipper does not benefit from arc commands as these are split again into line segments by the firmware. This results in a reduction in surface quality as line segments are converted to arcs by the slicer and then back to line segments by the firmware." msgstr "" "G2 및 G3 이동이 있는 Gcode 파일을 얻으려면 이 옵션을 활성화하십시오. 피팅 공차는 분해능과 동일합니다.\n" "\n" "참고: Klipper 기계의 경우 이 옵션을 비활성화하는 것이 좋습니다. Klipper는 arc 명령이 펌웨어에 의해 라인 세그먼트로 다시 분할되므로 이점을 얻지 못합니다. 이로 인해 선 세그먼트가 슬라이서에 의해 호로 변환된 다음 펌웨어에 의해 다시 선 세그먼트로 변환되므로 표면 품질이 저하됩니다." msgid "Add line number" msgstr "라인 번호 추가" msgid "Enable this to add line number(Nx) at the beginning of each G-code line." msgstr "각 Gcode 라인의 시작 부분에 라인 번호(Nx)를 추가하려면 이 기능을 활성화하세요" msgid "Scan first layer" msgstr "첫 레이어 스캔" msgid "Enable this to allow the camera on the printer to check the quality of the first layer." msgstr "프린터의 카메라가 첫 레이어의 품질을 확인할 수 있도록 하려면 이 옵션을 활성화하세요" # AI Translated msgid "Power Loss Recovery" msgstr "정전 복구" # AI Translated msgid "Choose how to control power loss recovery. When set to Printer configuration, the slicer will not emit power loss recovery G-code and will leave the printer's configuration unchanged. Applicable to Bambu Lab or Marlin 2 firmware based printers." msgstr "정전 복구를 제어하는 방식을 선택합니다. 프린터 구성으로 설정하면 슬라이서가 정전 복구 G-code를 생성하지 않고 프린터의 구성도 변경하지 않습니다. Bambu Lab 또는 Marlin 2 펌웨어 기반 프린터에 적용됩니다." # AI Translated msgid "Printer configuration" msgstr "프린터 구성" msgid "Nozzle type" msgstr "노즐 유형" msgid "The metallic material of the nozzle: This determines the abrasive resistance of the nozzle and what kind of filament can be printed." msgstr "노즐의 금속 재질. 노즐의 내마모성을 결정하고 어떤 종류의 필라멘트를 출력할 수 있는지를 결정합니다" msgid "Hardened steel" msgstr "경화강" msgid "Stainless steel" msgstr "스테인레스 스틸" msgid "Tungsten carbide" msgstr "텅스텐 카바이드" msgid "Nozzle HRC" msgstr "노즐 HRC" msgid "The nozzle's hardness. Zero means no checking for nozzle hardness during slicing." msgstr "노즐의 경도. 0은 슬라이스하는 동안 노즐의 경도를 확인하지 않음을 의미합니다." msgid "HRC" msgstr "HRC" msgid "Printer structure" msgstr "프린터 구조" msgid "The physical arrangement and components of a printing device." msgstr "출력 장치의 물리적 배열 및 구성 요소" msgid "CoreXY" msgstr "코어XY" msgid "I3" msgstr "I3" msgid "Hbot" msgstr "Hbot" msgid "Delta" msgstr "델타" msgid "Best object position" msgstr "가장 좋은 객체 위치" msgid "Best auto arranging position in range [0,1] w.r.t. bed shape." msgstr "베드 모양 w.r.t. 범위 [0,1] 내에서 가장 좋은 자동 정렬 위치입니다." msgid "Enable this option if machine has auxiliary part cooling fan. G-code command: M106 P2 S(0-255)." msgstr "장치에 보조 출력물 냉각팬이 있는 경우 이 옵션을 활성화합니다. Gcode 명령: M106 P2 S(0-255)." # AI Translated msgid "Fan direction" msgstr "팬 방향" # AI Translated msgid "Cooling fan direction of the printer" msgstr "프린터의 냉각 팬 방향입니다" # AI Translated msgid "Both" msgstr "양쪽" msgid "" "Start the fan this number of seconds earlier than its target start time (you can use fractional seconds). It assumes infinite acceleration for this time estimation, and will only take into account G1 and G0 moves (arc fitting is unsupported).\n" "It won't move fan commands from custom G-code (they act as a sort of 'barrier').\n" "It won't move fan commands into the start G-code if the 'only custom start G-code' is activated.\n" "Use 0 to deactivate." msgstr "" "목표한 시작 시간보다 이 시간(소수 초를 사용할 수 있음) 일찍 팬을 시작합니다. 이 시간 추정을 위해 무한 가속을 가정하고 G1 및 G0 이동만 고려합니다(원호 맞춤은 지원되지 않음).\n" "사용자 정의 Gcode에서 팬 명령을 이동하지 않습니다(일종의 '장벽' 역할을 함).\n" "'사용자 정의 시작 Gcode만'이 활성화된 경우 팬 명령을 시작 Gcode로 이동하지 않습니다.\n" "비활성화하려면 0을 사용하세요." msgid "Only overhangs" msgstr "오버행 만" msgid "Will only take into account the delay for the cooling of overhangs." msgstr "오버행 냉각 지연만 고려합니다." msgid "Fan kick-start time" msgstr "팬 시동 시간" msgid "" "Emit a max fan speed command for this amount of seconds before reducing to target speed to kick-start the cooling fan.\n" "This is useful for fans where a low PWM/power may be insufficient to get the fan started spinning from a stop, or to get the fan up to speed faster.\n" "Set to 0 to deactivate." msgstr "" "목표 속도로 줄이기 전에 냉각 팬을 시동하기 위해 이 시간만큼 일찍 최대 팬 속도 명령을 내립니다.\n" "이 기능은 낮은 PWM/전력으로는 팬이 정지 상태에서 회전을 시작하거나 팬의 속도를 빠르게 향상시키기에 부족할 수 있는 팬에게 유용합니다.\n" "비활성화하려면 0으로 설정합니다." # AI Translated msgid "Minimum non-zero part cooling fan speed" msgstr "0이 아닌 최소 출력물 냉각 팬 속도" # AI Translated msgid "" "Some part-cooling fans cannot start spinning when commanded below a certain PWM duty cycle. When set above 0, any non-zero part-cooling fan command will be raised to at least this percentage so the fan reliably starts. A fan command of 0 (fan off) is always honoured exactly. This clamp is applied after every other fan calculation (first-layer ramp, layer-time interpolation, overhang/bridge/support-interface/ironing overrides), so scaling still operates within the range [this value, 100%].\n" "If your firmware already disables the fan below a threshold (for example Klipper's [fan] off_below: 0.10 shuts the fan off whenever the commanded duty cycle is below 10%), this option and the firmware threshold should ideally be set to the same value. Matching them (e.g. off_below: 0.10 in Klipper and 10% here) guarantees the slicer never emits a non-zero value that the firmware would silently drop, and the fan never receives a value below the one you know it can actually spool at.\n" "Set to 0 to deactivate." msgstr "" "일부 출력물 냉각 팬은 특정 PWM 듀티 사이클 미만으로 명령하면 회전을 시작하지 못합니다. 0보다 큰 값으로 설정하면 0이 아닌 모든 출력물 냉각 팬 명령이 최소한 이 백분율까지 올라가 팬이 확실히 작동합니다. 팬 명령 0(팬 끄기)은 항상 그대로 적용됩니다. 이 제한은 다른 모든 팬 계산(초기 레이어 램프, 레이어 시간 보간, 오버행/브릿지/서포트 접점/다림질 재정의) 이후에 적용되므로, 스케일링은 [이 값, 100%] 범위 안에서 이루어집니다.\n" "펌웨어가 이미 특정 임계값 미만에서 팬을 끄는 경우(예: Klipper의 [fan] off_below: 0.10은 명령된 듀티 사이클이 10% 미만이면 팬을 끕니다), 이 옵션과 펌웨어 임계값을 같은 값으로 설정하는 것이 좋습니다. 두 값을 맞추면(예: Klipper의 off_below: 0.10과 여기의 10%) 슬라이서가 펌웨어에서 조용히 무시될 0이 아닌 값을 내보내지 않으며, 팬이 실제로 구동 가능한 값보다 낮은 값을 받지 않게 됩니다.\n" "0으로 설정하면 비활성화됩니다." msgid "Time cost" msgstr "시간비용" msgid "The printer cost per hour." msgstr "시간당 프린터 비용" msgid "money/h" msgstr "비용/시간" msgid "Support controlling chamber temperature" msgstr "챔버 온도 제어 지원" msgid "" "This option is enabled if machine support controlling chamber temperature\n" "G-code command: M141 S(0-255)" msgstr "" "이 옵션은 기계가 챔버 온도 제어를 지원하는 경우 활성화됩니다.\n" "Gcode 명령: M141 S(0-255)" msgid "Support air filtration" msgstr "공기 여과 지원" msgid "" "Enable this if printer support air filtration\n" "G-code command: M106 P3 S(0-255)" msgstr "" "프린터가 공기 여과를 지원하는 경우 활성화하세요.\n" "Gcode 명령: M106 P3 S(0-255)" msgid "Use cooling filter" msgstr "냉각 필터 사용" msgid "Enable this if printer support cooling filter" msgstr "프린터가 냉각 필터를 지원하는 경우 이 기능을 활성화하세요." msgid "G-code flavor" msgstr "Gcode 유형" msgid "What kind of G-code the printer is compatible with." msgstr "프린터와 호환되는 Gcode 종류" msgid "Klipper" msgstr "Klipper" msgid "Pellet Modded Printer" msgstr "펠릿 프린터" msgid "Enable this option if your printer uses pellets instead of filaments." msgstr "프린터가 필라멘트 대신 펠릿을 사용할 경우 활성화하세요" msgid "Support multi bed types" msgstr "멀티 베드 유형 지원" msgid "Enable this option if you want to use multiple bed types." msgstr "여러 베드 유형을 사용하려면 이 옵션을 활성화하세요" msgid "Label objects" msgstr "객체 이름표" # Wipe into this object;s infill/Wipe into this object msgid "Enable this to add comments into the G-code labeling print moves with what object they belong to, which is useful for the Octoprint CancelObject plug-in. This setting is NOT compatible with Single Extruder Multi Material setup and Wipe into Object / Wipe into Infill." msgstr "" "이 옵션을 선택하면 Gcode 출력시 이동에 설명을 추가할 수 있습니다. 이는 Octoprint CancelObject 플러그인에 유용합니다.\n" "이 설정은 단일 압출기 다중 재료 설정 및 객체에서 노즐 청소 / 채우기에서 노즐 청소와 호환되지 않습니다." msgid "Exclude objects" msgstr "객체 제외" msgid "Enable this option to add EXCLUDE OBJECT command in G-code." msgstr "Gcode에 객체 제외 명령을 추가하려면 이 옵션을 활성화하세요." msgid "Verbose G-code" msgstr "상세한 Gcode" msgid "Enable this to get a commented G-code file, with each line explained by a descriptive text. If you print from SD card, the additional weight of the file could make your firmware slow down." msgstr "주석이 달린 Gcode 파일을 가져오려면 이 기능을 활성화하세요. 각 라인은 설명 텍스트로 설명됩니다. SD 카드에서 출력하는 경우 파일의 추가 크기로 인해 펌웨어 속도가 느려질 수 있습니다." msgid "Infill combination" msgstr "채우기 결합" msgid "Automatically combine sparse infill of several layers to print together in order to reduce time. Walls are still printed with original layer height." msgstr "여러 레이어의 드문 채우기를 자동으로 결합 후 함께 출력하여 시간을 단축합니다. 벽은 여전히 설정된 레이어 높이로 출력됩니다." msgid "Infill shift step" msgstr "인필 시프트 단계" msgid "This parameter adds a slight displacement to each layer of infill to create a cross texture." msgstr "이 파라미터는 각 인필 레이어에 약간의 변위를 추가하여 교차 텍스처를 만듭니다." # AI Translated msgid "Sparse infill rotation template" msgstr "드문 채우기 회전 템플릿" # AI Translated msgid "Rotate the sparse infill direction per layer using a template of angles. Enter comma-separated degrees (e.g., '0,30,60,90'). Angles are applied in order by layer and repeat when the list ends. Advanced syntax is supported: '+5' rotates +5° every layer; '+5#5' rotates +5° every 5 layers. See the Wiki for details. When a template is set, the standard infill direction setting is ignored. Note: some infill patterns (e.g., Gyroid) control rotation themselves; use with care." msgstr "각도 템플릿을 사용하여 레이어별로 드문 채우기 방향을 회전시킵니다. 쉼표로 구분된 각도(예: '0,30,60,90')를 입력하십시오. 각도는 레이어 순서대로 적용되며 목록이 끝나면 처음부터 반복됩니다. 고급 구문도 지원됩니다. '+5'는 매 레이어마다 +5°씩 회전하고, '+5#5'는 5개 레이어마다 +5°씩 회전합니다. 자세한 내용은 Wiki를 참조하십시오. 템플릿이 설정되면 표준 채우기 방향 설정은 무시됩니다. 참고: 일부 채우기 패턴(예: 자이로이드)은 회전을 자체적으로 제어하므로 주의해서 사용하십시오." # AI Translated msgid "Solid infill rotation template" msgstr "꽉찬 채우기 회전 템플릿" # AI Translated msgid "This parameter adds a rotation of solid infill direction to each layer according to the specified template. The template is a comma-separated list of angles in degrees, e.g. '0,90'. The first angle is applied to the first layer, the second angle to the second layer, and so on. If there are more layers than angles, the angles will be repeated. Note that not all solid infill patterns support rotation." msgstr "이 매개변수는 지정한 템플릿에 따라 각 레이어의 꽉찬 채우기 방향에 회전을 더합니다. 템플릿은 쉼표로 구분된 각도 목록으로, 예를 들어 '0,90'과 같습니다. 첫 번째 각도는 첫 번째 레이어에, 두 번째 각도는 두 번째 레이어에 적용되는 식입니다. 레이어 수가 각도 수보다 많으면 각도가 반복됩니다. 모든 꽉찬 채우기 패턴이 회전을 지원하는 것은 아닙니다." msgid "Skeleton infill density" msgstr "골격 채우기 밀도" # AI Translated msgid "The remaining part of the model contour after removing a certain depth from the surface is called the skeleton. This parameter is used to adjust the density of this section. When two regions have the same sparse infill settings but different skeleton densities, their skeleton areas will develop overlapping sections. Default is as same as infill density." msgstr "표면에서 일정 깊이를 제거한 뒤 남는 모델 외곽 부분을 골격이라고 합니다. 이 매개변수는 해당 부분의 밀도를 조정합니다. 두 영역의 드문 채우기 설정은 같지만 골격 밀도가 다르면 골격 영역이 서로 겹치는 부분이 생깁니다. 기본값은 채우기 밀도와 동일합니다." msgid "Skin infill density" msgstr "표면 채우기 밀도" # AI Translated msgid "The portion of the model's outer surface within a certain depth range is called the skin. This parameter is used to adjust the density of this section. When two regions have the same sparse infill settings but different skin densities, this area will not be split into two separate regions. Default is as same as infill density." msgstr "일정 깊이 범위 안에 있는 모델 바깥 표면 부분을 표면(스킨)이라고 합니다. 이 매개변수는 해당 부분의 밀도를 조정합니다. 두 영역의 드문 채우기 설정은 같지만 표면 밀도가 다르면 이 영역은 두 개의 별도 영역으로 나뉘지 않습니다. 기본값은 채우기 밀도와 동일합니다." msgid "Skin infill depth" msgstr "표면 채우기 깊이" msgid "The parameter sets the depth of skin." msgstr "매개변수는 표면의 깊이를 설정합니다." msgid "Infill lock depth" msgstr "채우기 잠금 깊이" msgid "The parameter sets the overlapping depth between the interior and skin." msgstr "매개변수는 내부와 표면 사이의 겹치는 깊이를 설정합니다." msgid "Skin line width" msgstr "표면 선 폭" msgid "Adjust the line width of the selected skin paths." msgstr "선택한 표면 경로의 선 폭를 조정합니다." msgid "Skeleton line width" msgstr "골격 선 폭" msgid "Adjust the line width of the selected skeleton paths." msgstr "선택한 골격 경로의 선 폭를 조정합니다." # AI Translated msgid "Symmetric infill Y axis" msgstr "Y축 대칭 채우기" # AI Translated msgid "If the model has two parts that are symmetric about the Y axis, and you want these parts to have symmetric textures, please click this option on one of the parts." msgstr "모델에 Y축을 기준으로 대칭인 두 부품이 있고 이 부품들이 대칭 질감을 갖게 하려면, 두 부품 중 하나에서 이 옵션을 선택하십시오." msgid "Infill combination - Max layer height" msgstr "채우기 조합 - 최대 레이어 높이" msgid "" "Maximum layer height for the combined sparse infill.\n" "\n" "Set it to 0 or 100% to use the nozzle diameter (for maximum reduction in print time) or a value of ~80% to maximize sparse infill strength.\n" "\n" "The number of layers over which infill is combined is derived by dividing this value with the layer height and rounded down to the nearest decimal.\n" "\n" "Use either absolute mm values (eg. 0.32mm for a 0.4mm nozzle) or % values (eg 80%). This value must not be larger than the nozzle diameter." msgstr "" "결합된 희소 채우기의 최대 레이어 높이입니다.\n" "\n" "노즐 직경(출력 시간을 최대로 줄이기 위해)을 사용하려면 0 또는 100%로 설정하고 희박한 채우기 강도를 최대화하려면 ~80% 값으로 설정합니다.\n" "\n" "채우기가 결합되는 레이어 수는 이 값을 레이어 높이로 나누고 가장 가까운 소수점 이하 자릿수로 반내림하여 파생됩니다.\n" "\n" "절대 mm 값(예: 0.4mm 노즐의 경우 0.32mm) 또는 % 값(예: 80%)을 사용합니다. 이 값은 노즐 직경보다 커서는 안 됩니다." msgid "Enable clumping detection" msgstr "뭉침 감지 활성화" msgid "Clumping detection layers" msgstr "뭉침 감지 레이어" msgid "Clumping detection layers." msgstr "뭉침 감지 레이어." msgid "Probing exclude area of clumping" msgstr "뭉침 영역 프로빙 제외" msgid "Probing exclude area of clumping." msgstr "뭉침 감지 제외 영역." msgid "Lateral lattice angle 1" msgstr "격자 각도 1" msgid "The angle of the first set of Lateral lattice elements in the Z direction. Zero is vertical." msgstr "Z 방향의 첫 번째 2D 격자 요소 집합의 각도입니다. 0은 수직입니다." msgid "Lateral lattice angle 2" msgstr "격자 각도 2" msgid "The angle of the second set of Lateral lattice elements in the Z direction. Zero is vertical." msgstr "Z 방향에서 두 번째 2D 격자 요소 세트의 각도입니다. 0은 수직입니다." # AI Translated msgid "Infill overhang angle" msgstr "채우기 오버행 각도" # AI Translated msgid "The angle of the infill angled lines. 60° will result in a pure honeycomb." msgstr "채우기 경사선의 각도입니다. 60°로 설정하면 순수한 벌집 형태가 됩니다." # AI Translated msgid "Lightning overhang angle" msgstr "번개 오버행 각도" # AI Translated msgid "Maximum overhang angle for Lightning infill support propagation." msgstr "번개 채우기의 지지 전파에 사용되는 최대 오버행 각도입니다." # AI Translated msgid "Prune angle" msgstr "가지치기 각도" # AI Translated msgid "" "Controls how aggressively short or unsupported Lightning branches are pruned.\n" "This angle is converted internally to a per-layer distance." msgstr "" "짧거나 지지되지 않는 번개 가지를 얼마나 적극적으로 정리할지 제어합니다.\n" "이 각도는 내부적으로 레이어별 거리로 변환됩니다." # AI Translated msgid "Straightening angle" msgstr "직선화 각도" # AI Translated msgid "Maximum straightening angle used to simplify Lightning branches." msgstr "번개 가지를 단순화하는 데 사용되는 최대 직선화 각도입니다." msgid "Sparse infill anchor length" msgstr "드문 채우기 고정점 길이" msgid "" "Connect an infill line to an internal perimeter with a short segment of an additional perimeter. If expressed as percentage (example: 15%) it is calculated over infill extrusion width. Orca Slicer tries to connect two close infill lines to a short perimeter segment. If no such perimeter segment shorter than infill_anchor_max is found, the infill line is connected to a perimeter segment at just one side and the length of the perimeter segment taken is limited to this parameter, but no longer than anchor_length_max.\n" "Set this parameter to zero to disable anchoring perimeters connected to a single infill line." msgstr "" "사용하여 채우기 선을 내부 둘레에 연결합니다. 백분율(예: 15%)로 표시되는 경우 채우기 돌출 너비에 대해 계산됩니다. Orca Slicer은 두 개의 가까운 채우기 선을 짧은 주변 세그먼트에 연결하려고 합니다. 내부 채우기 고정점 (infill_anchor_max) 최대 길이보다 짧은 경계 세그먼트가 발견되지 않으면 \n" "채우기 선은 한쪽에서 경계 세그먼트에 연결되고 취해진 경계 세그먼트의 길이는 이 매개변수로 제한되지만 최대 고정점 길이(anchor_length_max) 보다 길지 않습니다.\n" "단일 채우기 선에 연결된 고정 둘레를 비활성화하려면 이 매개변수를 0으로 설정합니다." msgid "0 (no open anchors)" msgstr "0 (개방형 고정점 없음)" msgid "1000 (unlimited)" msgstr "1000 (무제한)" msgid "Maximum length of the infill anchor" msgstr "채우기 고정점 최대 길이" msgid "" "Connect an infill line to an internal perimeter with a short segment of an additional perimeter. If expressed as percentage (example: 15%) it is calculated over infill extrusion width. Orca Slicer tries to connect two close infill lines to a short perimeter segment. If no such perimeter segment shorter than this parameter is found, the infill line is connected to a perimeter segment at just one side and the length of the perimeter segment taken is limited to infill_anchor, but no longer than this parameter.\n" "If set to 0, the old algorithm for infill connection will be used, it should create the same result as with 1000 & 0." msgstr "" "추가 둘레의 짧은 세그먼트를 사용하여 채우기 선을 내부 둘레에 연결합니다. 백분율(예: 15%)로 표시되는 경우 채우기 돌출 너비에 대해 계산됩니다. Orca Slicer은 두 개의 가까운 채우기 선을 짧은 주변 세그먼트에 연결하려고 합니다. 이 매개변수보다 짧은 주변 세그먼트가 발견되지 않으면 채우기 선은 한쪽 측면의 주변 세그먼트에 연결되고 사용된 주변 세그먼트의 길이는 앵커 채우기(infill_anchor)로 제한되지만 이 매개변수보다 길지 않습니다.\n" "0으로 설정하면 채우기 연결에 대한 이전 알고리즘이 사용되며 1000 & 0과 동일한 결과를 생성해야 합니다." msgid "0 (Simple connect)" msgstr "0 (단순 연결)" # AI Translated msgid "" "Filament to print internal sparse infill.\n" "\"Default\" uses the active object/part filament." msgstr "" "드문 내부 채우기를 출력할 필라멘트입니다.\n" "\"기본값\"은 활성 객체/부품의 필라멘트를 사용합니다." msgid "Line width of internal sparse infill. If expressed as a %, it will be computed over the nozzle diameter." msgstr "드문 내부 채우기의 선 너비. %로 입력 시 노즐 직경에 대한 비율로 계산됩니다." msgid "Infill/wall overlap" msgstr "채우기/벽 겹치기" #, no-c-format, no-boost-format msgid "This allows the infill area to be enlarged slightly to overlap with walls for better bonding. The percentage value is relative to line width of sparse infill. Set this value to ~10-15% to minimize potential over extrusion and accumulation of material resulting in rough top surfaces." msgstr "채우기 영역은 더 나은 접착을 위해 벽과 겹치도록 약간 확대됩니다. 백분율 값은 희박한 채우기의 선 너비를 기준으로 합니다. 거친 상단 표면을 초래하는 재료의 압출 및 축적 가능성을 최소화하려면 이 값을 ~10-15%로 설정하십시오." msgid "Top/Bottom solid infill/wall overlap" msgstr "상하단 솔리드 채우기/벽 겹침" #, no-c-format, no-boost-format msgid "Top solid infill area is enlarged slightly to overlap with wall for better bonding and to minimize the appearance of pinholes where the top infill meets the walls. A value of 25-30% is a good starting point, minimizing the appearance of pinholes. The percentage value is relative to line width of sparse infill." msgstr "상단 솔리드 채우기 영역은 더 나은 접착을 위해 벽과 겹치도록 약간 확대되고 상단 채우기가 벽과 만나는 핀홀의 모양을 최소화합니다. 25-30%의 값은 핀홀의 모양을 최소화하는 좋은 출발점입니다. 백분율 값은 희박한 채우기의 선 너비를 기준으로 합니다" msgid "This is the speed for internal sparse infill." msgstr "내부 드문 채우기 속도" msgid "Inherits profile" msgstr "프로필 상속" msgid "Name of parent profile." msgstr "부모 프로필 이름" msgid "Interface shells" msgstr "접점 쉘" msgid "Force the generation of solid shells between adjacent materials/volumes. Useful for multi-extruder prints with translucent materials or manual soluble support material." msgstr "인접한 재료/압출 사이에 꽉찬 쉘을 강제로 생성합니다. 투명한 재료 또는 용해성 서포트 재료를 사용하는 다중 압출기 출력에 유용합니다" msgid "Maximum width of a segmented region" msgstr "분할된 영역의 최대 너비" msgid "Maximum width of a segmented region. A value of 0 disables this feature." msgstr "분할된 영역의 최대 너비입니다. 0은 이 기능을 비활성화합니다." msgid "Interlocking depth of a segmented region" msgstr "분할된 영역의 연동 깊이" msgid "Interlocking depth of a segmented region. It will be ignored if \"mmu_segmented_region_max_width\" is zero or if \"mmu_segmented_region_interlocking_depth\" is bigger than \"mmu_segmented_region_max_width\". Zero disables this feature." msgstr "분할된 영역의 연동 깊이. \"mmu_segmented_region_max_width\"가 0이거나 \"mmu_segmented_region_interlocking_length\"가 \"mmu_segmented_region_max_width\"보다 크면 무시됩니다. 0은 이 기능을 비활성화합니다." msgid "Use beam interlocking" msgstr "인터로킹 빔 사용" msgid "Generate interlocking beam structure at the locations where different filaments touch. This improves the adhesion between filaments, especially models printed in different materials." msgstr "서로 다른 필라멘트가 접촉하는 곳에 맞물리는 구조의 인터로킹 빔을 생성합니다. 이 기능은 필라멘트 간의 결합력을 향상시키며, 서로 다른 재료로 출력한 모델에 특히 유용합니다." msgid "Interlocking beam width" msgstr "인터로킹 빔 너비" msgid "The width of the interlocking structure beams." msgstr "인터로킹 빔 구조의 너비." msgid "Interlocking direction" msgstr "맞물림 방향" msgid "Orientation of interlock beams." msgstr "인터로킹 빔의 배치 방향." msgid "Interlocking beam layers" msgstr "인터로킹 빔 레이어 수" msgid "The height of the beams of the interlocking structure, measured in number of layers. Less layers is stronger, but more prone to defects." msgstr "맞물림 구조의 높이를 레이어 수로 나타낸 값입니다. 레이어 수가 적을수록 강도가 올라가나, 결함이 발생하기 더 쉬워집니다." msgid "Interlocking depth" msgstr "맞물림 깊이" msgid "The distance from the boundary between filaments to generate interlocking structure, measured in cells. Too few cells will result in poor adhesion." msgstr "필라멘트 간의 접촉면으로부터 맞물림 구조를 생성할 거리를 셀의 수로 나타낸 값입니다. 너무 적은 수의 셀을 사용할 경우 결합력이 저하될 수 있습니다." msgid "Interlocking boundary avoidance" msgstr "맞물림 방지 거리" msgid "The distance from the outside of a model where interlocking structures will not be generated, measured in cells." msgstr "모델의 외벽으로부터 맞물림 구조를 생성하기 시작할 거리를 설정합니다." msgid "Ironing type" msgstr "다림질 유형" msgid "Ironing uses a small flow to print at the same height of a surface to make flat surfaces smoother. This setting controls which layers are being ironed." msgstr "다림질은 평평한 표면을 더 부드럽게 만들기 위해 같은 높이의 표면에 소량의 압출로 다시 출력하는 것입니다. 이 설정은 다림질 레이어를 제어합니다" msgid "No ironing" msgstr "사용안함" msgid "All top surfaces" msgstr "상단 표면" msgid "Topmost surface only" msgstr "최상단 표면" msgid "All solid layers" msgstr "모든 꽉찬 레이어" msgid "Ironing Pattern" msgstr "다림질 패턴" msgid "The pattern that will be used when ironing." msgstr "다림질할 때 사용할 패턴" msgid "This is the amount of material to be extruded during ironing. It is relative to the flow of normal layer height. Too high a value will result in overextrusion on the surface." msgstr "다림질 중에 압출할 재료의 양입니다. 정상 레이어 높이의 압출량에 상대적입니다. 값이 너무 높으면 표면에 과다 압출이 발생합니다" msgid "This is the distance between the lines used for ironing." msgstr "다림질 선 간격" msgid "The distance to keep from the edges. A value of 0 sets this to half of the nozzle diameter." msgstr "가장자리로부터 유지할 거리입니다. 값이 0이면 노즐 직경의 절반으로 설정됩니다." msgid "This is the print speed for ironing lines." msgstr "다림질 선의 출력 속도" # AI Translated msgid "Ironing angle offset" msgstr "다림질 각도 오프셋" # AI Translated msgid "The angle of ironing lines offset from the top surface." msgstr "상단 표면을 기준으로 한 다림질 선의 각도 오프셋입니다." # AI Translated msgid "Fixed ironing angle" msgstr "고정 다림질 각도" # AI Translated msgid "Use a fixed absolute angle for ironing." msgstr "다림질에 고정된 절대 각도를 사용합니다." # AI Translated msgid "Ironing expansion" msgstr "다림질 확장" # AI Translated msgid "Expand or contract the ironing area." msgstr "다림질 영역을 확장하거나 축소합니다." # AI Translated msgid "Z contouring enabled" msgstr "Z 윤곽 처리 활성화" # AI Translated msgid "Enable Z-layer contouring (aka Z-layer anti-aliasing)." msgstr "Z 레이어 윤곽 처리(Z 레이어 안티앨리어싱)를 활성화합니다." # AI Translated msgid "Minimize wall height angle" msgstr "벽 높이 최소화 각도" # AI Translated msgid "" "Reduce the height of top-surface perimeters to match the model edge height.\n" "Affects perimeters with a slope less than this angle (degrees).\n" "A reasonable value is 35. Set to 0 to disable." msgstr "" "상단 표면 둘레의 높이를 모델 가장자리 높이에 맞춰 줄입니다.\n" "이 각도(도)보다 기울기가 작은 둘레에 적용됩니다.\n" "적절한 값은 35입니다. 0으로 설정하면 비활성화됩니다." # AI Translated msgid "Don't alternate fill direction" msgstr "채우기 방향을 번갈아 바꾸지 않기" # AI Translated msgid "Disable alternating fill direction when using Z contouring." msgstr "Z 윤곽 처리를 사용할 때 채우기 방향을 번갈아 바꾸지 않도록 합니다." # AI Translated msgid "Minimum Z height" msgstr "최소 Z 높이" # AI Translated msgid "" "Minimum Z-layer height.\n" "Also controls the slicing plane." msgstr "" "최소 Z 레이어 높이입니다.\n" "슬라이싱 평면도 함께 제어합니다." msgid "This G-code is inserted at every layer change after the Z lift." msgstr "이 Gcode는 Z올리기 이후 모든 레이어 변경에 삽입됩니다" msgid "Clumping detection G-code" msgstr "뭉침 감지 G-code" # AI Translated msgid "Silent Mode" msgstr "무음 모드" msgid "Whether the machine supports silent mode in which machine uses lower acceleration to print more quietly" msgstr "기기가 낮은 가속도를 사용하여 출력하는 무음 모드 지원 여부" msgid "Emit limits to G-code" msgstr "Gcode에 대한 방출 제한" msgid "Machine limits" msgstr "장치 한계" msgid "" "If enabled, the machine limits will be emitted to G-code file.\n" "This option will be ignored if the G-code flavor is set to Klipper." msgstr "" "활성화되면 기계의 한계가 Gcode 파일로 내보내집니다.\n" "Gcode 유형이 Klipper로 설정된 경우 이 옵션은 무시됩니다." msgid "This G-code will be used as a code for the pause print. Users can insert pause G-code in the G-code viewer." msgstr "이 Gcode는 출력 일시 정지를 위한 코드로 사용됩니다. 사용자는 Gcode 뷰어에서 일시 정지 Gcode를 삽입할 수 있습니다" msgid "This G-code will be used as a custom code." msgstr "이 Gcode는 사용자 정의 코드로 사용됩니다" msgid "Small area flow compensation (beta)" msgstr "작은 영역 압출량 보상 (베타)" msgid "Enable flow compensation for small infill areas." msgstr "작은 채우기 영역에 대한 압출량 보상 활성화" msgid "Flow Compensation Model" msgstr "압출량 보상 모델" # AI Translated msgid "Flow Compensation Model, used to adjust the flow for small infill areas. The model is expressed as a comma separated pair of values for extrusion length and flow correction factor. Each pair is on a separate line, followed by a semicolon, in the following format: \"1.234, 5.678;\"" msgstr "작은 채우기 영역의 압출량을 조정하는 데 사용되는 압출량 보정 모델입니다. 이 모델은 압출 길이와 압출량 보정 계수를 쉼표로 구분한 값 쌍으로 표현됩니다. 각 쌍은 별도의 줄에 세미콜론을 붙여 다음 형식으로 입력합니다: \"1.234, 5.678;\"" msgid "Maximum speed X" msgstr "X축 최대 속도" msgid "Maximum speed Y" msgstr "Y축 최대 속도" msgid "Maximum speed Z" msgstr "Z축 최대 속도" msgid "Maximum speed E" msgstr "E축 최대 속도" msgid "Maximum X speed" msgstr "X축 최대 속도" msgid "Maximum Y speed" msgstr "Y축 최대 속도" msgid "Maximum Z speed" msgstr "Z축 최대 속도" msgid "Maximum E speed" msgstr "E축 최대 속도" msgid "Maximum acceleration X" msgstr "X축 최대 가속도" msgid "Maximum acceleration Y" msgstr "Y축 최대 가속도" msgid "Maximum acceleration Z" msgstr "Z축 최대 가속도" msgid "Maximum acceleration E" msgstr "E축 최대 가속도" msgid "Maximum acceleration of the X axis" msgstr "X축 최대 가속도" msgid "Maximum acceleration of the Y axis" msgstr "Y축 최대 가속도" msgid "Maximum acceleration of the Z axis" msgstr "Z축 최대 가속도" msgid "Maximum acceleration of the E axis" msgstr "E축 최대 가속도" msgid "Maximum jerk X" msgstr "X축 최대 저크" msgid "Maximum jerk Y" msgstr "Y축 최대 저크" msgid "Maximum jerk Z" msgstr "Z축 최대 저크" msgid "Maximum jerk E" msgstr "E축 최대 저크" msgid "Maximum jerk of the X axis" msgstr "X축 최대 저크" msgid "Maximum jerk of the Y axis" msgstr "Y축 최대 저크" msgid "Maximum jerk of the Z axis" msgstr "Z축 최대 저크" msgid "Maximum jerk of the E axis" msgstr "E축 최대 저크" # AI Translated msgid "Maximum Junction Deviation" msgstr "최대 Junction Deviation" # AI Translated msgid "" "Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin Firmware\n" "If your Marlin 2 printer uses Classic Jerk set this value to 0.)" msgstr "" "최대 Junction Deviation입니다(M205 J, Marlin 펌웨어에서는 JD > 0인 경우에만 적용됩니다.\n" "Marlin 2 프린터가 Classic Jerk를 사용한다면 이 값을 0으로 설정하십시오.)" msgid "Minimum speed for extruding" msgstr "압출 중 최대 속도" msgid "Minimum speed for extruding (M205 S)" msgstr "압출 중 최대 속도 (M205 S)" msgid "Minimum travel speed" msgstr "최소 이동 속도" msgid "Minimum travel speed (M205 T)" msgstr "최소 이동 속도 (M205 T)" msgid "Maximum force of the Y axis" msgstr "Y축의 최대 힘" msgid "The allowed maximum output force of Y axis" msgstr "Y축의 허용 최대 출력 힘" # AI Translated msgid "N" msgstr "N" msgid "Bed mass of the Y axis" msgstr "Y축의 베드 질량" msgid "The machine bed mass load of Y axis" msgstr "Y축 장비 베드 질량 하중" # AI Translated msgid "g" msgstr "g" msgid "The allowed max printed mass" msgstr "허용되는 최대 출력 질량" msgid "The allowed max printed mass on a plate" msgstr "플레이트에 허용되는 최대 출력 질량" msgid "Maximum acceleration for extruding" msgstr "압출 중 최대 가속도" msgid "Maximum acceleration for extruding (M204 P)" msgstr "압출 중 최대 가속도 (M204 P)" msgid "Maximum acceleration for retracting" msgstr "후퇴 중 최대 가속도" msgid "Maximum acceleration for retracting (M204 R)" msgstr "후퇴 중 최대 가속도 (M204 R)" msgid "Maximum acceleration for travel" msgstr "이동 최대 가속도" msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2." msgstr "이동 시 최대 가속도(M204 T)는 Marlin 2에만 적용됩니다" # AI Translated msgid "Resonance avoidance" msgstr "공진 회피" # AI Translated msgid "" "By reducing the speed of the outer wall to avoid the resonance zone of the printer, ringing on the surface of the model are avoided.\n" "Please turn this option off when testing ringing." msgstr "" "외벽 속도를 낮춰 프린터의 공진 구간을 피함으로써 모델 표면의 링잉을 방지합니다.\n" "링잉을 테스트할 때는 이 옵션을 끄십시오." msgid "Min" msgstr "최소" # AI Translated msgid "Minimum speed of resonance avoidance." msgstr "공진 회피의 최소 속도입니다." msgid "Max" msgstr "최대" # AI Translated msgid "Maximum speed of resonance avoidance." msgstr "공진 회피의 최대 속도입니다." # AI Translated msgid "Emit input shaping" msgstr "인풋 셰이핑 명령 출력" # AI Translated msgid "" "Override firmware input shaping settings.\n" "If disabled, firmware settings are used." msgstr "" "펌웨어의 인풋 셰이핑 설정을 재정의합니다.\n" "비활성화하면 펌웨어 설정이 사용됩니다." # AI Translated msgid "Input shaper type" msgstr "인풋 셰이퍼 유형" # AI Translated msgid "" "Choose the input shaper algorithm.\n" "Default uses the firmware default settings.\n" "Disable turns off input shaping in the firmware." msgstr "" "인풋 셰이퍼 알고리즘을 선택합니다.\n" "기본값은 펌웨어의 기본 설정을 사용합니다.\n" "비활성화는 펌웨어의 인풋 셰이핑을 끕니다." msgid "MZV" msgstr "MZV" msgid "ZV" msgstr "ZV" msgid "ZVD" msgstr "ZVD" msgid "ZVDD" msgstr "ZVDD" msgid "ZVDDD" msgstr "ZVDDD" msgid "EI" msgstr "EI" msgid "EI2" msgstr "EI2" msgid "2HUMP_EI" msgstr "2HUMP_EI" msgid "EI3" msgstr "EI3" msgid "3HUMP_EI" msgstr "3HUMP_EI" msgid "DAA" msgstr "DAA" msgid "X" msgstr "X" # AI Translated msgid "" "Resonant frequency for the X axis input shaper.\n" "Zero will use the firmware frequency.\n" "To disable input shaping, use the Disable type.\n" "RRF: X and Y values are equal." msgstr "" "X축 인풋 셰이퍼의 공진 주파수입니다.\n" "0으로 설정하면 펌웨어 주파수를 사용합니다.\n" "인풋 셰이핑을 끄려면 비활성화 유형을 사용하십시오.\n" "RRF: X와 Y 값이 동일합니다." msgid "Hz" msgstr "Hz" msgid "Y" msgstr "Y" # AI Translated msgid "" "Resonant frequency for the Y axis input shaper.\n" "Zero will use the firmware frequency.\n" "To disable input shaping, use the Disable type." msgstr "" "Y축 인풋 셰이퍼의 공진 주파수입니다.\n" "0으로 설정하면 펌웨어 주파수를 사용합니다.\n" "인풋 셰이핑을 끄려면 비활성화 유형을 사용하십시오." # AI Translated msgid "" "Damping ratio for the X axis input shaper.\n" "Zero will use the firmware damping ratio.\n" "To disable input shaping, use the Disable type.\n" "RRF: X and Y values are equal." msgstr "" "X축 인풋 셰이퍼의 감쇠비입니다.\n" "0으로 설정하면 펌웨어 감쇠비를 사용합니다.\n" "인풋 셰이핑을 끄려면 비활성화 유형을 사용하십시오.\n" "RRF: X와 Y 값이 동일합니다." # AI Translated msgid "" "Damping ratio for the Y axis input shaper.\n" "Zero will use the firmware damping ratio.\n" "To disable input shaping, use the Disable type." msgstr "" "Y축 인풋 셰이퍼의 감쇠비입니다.\n" "0으로 설정하면 펌웨어 감쇠비를 사용합니다.\n" "인풋 셰이핑을 끄려면 비활성화 유형을 사용하십시오." msgid "The part cooling fan speed may be increased when auto cooling is enabled. This is the maximum speed for the part cooling fan." msgstr "자동 냉각이 활성화되면 출력물 냉각 팬 속도가 증가할 수 있습니다. 이는 출력물 냉각 팬의 최대 속도 제한입니다" # AI Translated msgid "The highest printable layer height for the extruder. Used to limit the maximum layer height when enable adaptive layer height." msgstr "이 압출기로 출력할 수 있는 최대 레이어 높이입니다. 적응형 레이어 높이를 활성화했을 때 최대 레이어 높이를 제한하는 데 사용됩니다." msgid "Extrusion rate smoothing" msgstr "유연한 압출량" msgid "" "This parameter smooths out sudden extrusion rate changes that happen when the printer transitions from printing a high flow (high speed/larger width) extrusion to a lower flow (lower speed/smaller width) extrusion and vice versa.\n" "\n" "It defines the maximum rate by which the extruded volumetric flow in mm³/s can change over time. Higher values mean higher extrusion rate changes are allowed, resulting in faster speed transitions.\n" "\n" "A value of 0 disables the feature.\n" "\n" "For a high speed, high flow direct drive printer (like the Bambu lab or Voron) this value is usually not needed. However it can provide some marginal benefit in certain cases where feature speeds vary greatly. For example, when there are aggressive slowdowns due to overhangs. In these cases a high value of around 300-350 mm³/s² is recommended as this allows for just enough smoothing to assist pressure advance achieve a smoother flow transition.\n" "\n" "For slower printers without pressure advance, the value should be set much lower. A value of 10-15 mm³/s² is a good starting point for direct drive extruders and 5-10 mm³/s² for Bowden style.\n" "\n" "This feature is known as Pressure Equalizer in Prusa slicer.\n" "\n" "Note: this parameter disables arc fitting." msgstr "" "이 매개변수는 프린터가 높은 압출량(고속/더 큰 너비) 압출에서 낮은 압출량(낮은 속도/더 작은 너비) 압출로 또는 그 반대로 출력할 때 발생하는 급격한 압출 속도 변화를 완화합니다.\n" "\n" "이는 압출된 압출 압출량(mm³/초)이 시간에 따라 변할 수 있는 최대 속도를 정의합니다. 값이 높을수록 더 높은 압출 속도 변경이 허용되어 속도 전환이 더 빨라진다는 의미입니다.\n" "\n" "값이 0이면 기능이 비활성화됩니다.\n" "\n" "고속, 고압출량 직접 구동 프린터(예: 뱀부랩 또는 보론)의 경우 일반적으로 이 값이 필요하지 않습니다. 그러나 기능 속도가 크게 달라지는 특정 경우에는 약간의 이점을 제공할 수 있습니다. 예를 들어 오버행로 인해 급격하게 감속이 발생하는 경우입니다. 이러한 경우 약 300-350 mm³/s²의 높은 값이 권장됩니다. 이렇게 하면 프레셔 어드밴스가 더 부드러운 압출량 전환을 달성하는 데 도움이 될 만큼 충분히 매끄러워질 수 있기 때문입니다.\n" "\n" "프레셔 어드밴스 기능이 없는 느린 프린터의 경우 값을 훨씬 낮게 설정해야 합니다. 10-15 mm³/s² 값은 직접 구동 압출기의 좋은 시작점이고 보우덴 스타일의 경우 5-10 mm³/s²입니다.\n" "\n" "이 기능은 Prusa 슬라이서에서는 프레셔 이퀄라이저(Pressure Equalizer)로 알려져 있습니다.\n" "\n" "참고: 이 매개변수는 원호 피팅(Arc fitting)을 비활성화합니다." msgid "mm³/s²" msgstr "mm³/s²" msgid "Smoothing segment length" msgstr "유연 분할 길이" msgid "" "A lower value results in smoother extrusion rate transitions. However, this results in a significantly larger G-code file and more instructions for the printer to process.\n" "\n" "Default value of 3 works well for most cases. If your printer is stuttering, increase this value to reduce the number of adjustments made.\n" "\n" "Allowed values: 0.5-5" msgstr "" "값이 낮을수록 압출 속도 전환이 더 부드러워집니다. 그러나 이 경우 g코드 파일이 상당히 커지고 프린터가 처리해야 할 지침이 더 많아집니다.\n" "\n" "기본값인 3이 대부분의 경우에 적합합니다. 프린터가 끊기는 경우 이 값을 늘려 조정 횟수를 줄이십시오.\n" "\n" "허용된 값: 0.5-5" msgid "Apply only on external features" msgstr "외부 기능에만 적용" msgid "Applies extrusion rate smoothing only on external perimeters and overhangs. This can help reduce artefacts due to sharp speed transitions on externally visible overhangs without impacting the print speed of features that will not be visible to the user." msgstr "외부 경계와 오버행에만 돌출 속도 평활화를 적용합니다. 이렇게 하면 사용자에게 보이지 않는 피처의 출력 속도에는 영향을 주지 않으면서 외부에 보이는 오버행의 급격한 속도 전환으로 인한 아티팩트를 줄일 수 있습니다." msgid "Minimum speed for part cooling fan." msgstr "출력물 냉각 팬의 최소 속도" msgid "" "Speed of auxiliary part cooling fan. Auxiliary fan will run at this speed during printing except the first several layers which is defined by no cooling layers.\n" "Please enable auxiliary_fan in printer settings to use this feature. G-code command: M106 P2 S(0-255)" msgstr "" "보조 출력물 냉각팬의 속도. 냉각 레이어가 없는 것으로 정의된 처음 여러 레이어를 제외하고 출력 중에 보조 팬이 이 속도로 작동합니다.\n" "이 기능을 사용하려면 프린터 설정에서 보조 팬을 활성화하세요. Gcode 명령: M106 P2 S(0-255)" msgid "For the first" msgstr "첫 몇개의" msgid "Set special auxiliary cooling fan for the first certain layers." msgstr "첫 몇 개의 특정 레이어에 대해 특수 보조 냉각 팬을 설정하십시오." # AI Translated msgid "" "Auxiliary fan speed will be ramped up linearly from layer \"For the first\" to maximum at layer \"Full fan speed at layer\".\n" "\"Full fan speed at layer\" will be ignored if lower than \"For the first\", in which case the fan will run at maximum allowed speed at layer \"For the first\" + 1." msgstr "" "보조 팬 속도는 \"초기 레이어 수\" 레이어부터 \"팬 최대 속도 레이어\"까지 선형적으로 상승합니다.\n" "\"팬 최대 속도 레이어\"가 \"초기 레이어 수\"보다 작으면 무시되며, 이 경우 팬은 \"초기 레이어 수\" + 1 레이어에서 허용된 최대 속도로 작동합니다." # AI Translated msgid "Special auxiliary cooling fan speed, effective only for the first x layers." msgstr "특수 보조 냉각 팬 속도로, 처음 x개 레이어에만 적용됩니다." # AI Translated msgid "The lowest printable layer height for the extruder. Used to limit the minimum layer height when enable adaptive layer height." msgstr "이 압출기로 출력할 수 있는 최소 레이어 높이입니다. 적응형 레이어 높이를 활성화했을 때 최소 레이어 높이를 제한하는 데 사용됩니다." msgid "Min print speed" msgstr "최소 출력 속도" msgid "The minimum print speed to which the printer slows down to maintain the minimum layer time defined above when the slowdown for better layer cooling is enabled." msgstr "레이어 냉각을 위한 감속이 활성화된 경우 위에 정의된 최소 레이어 시간을 유지하기 위해 프린터가 감속하는 최소 출력 속도입니다." msgid "The diameter of nozzle." msgstr "노즐 직경" msgid "Configuration notes" msgstr "구성 메모" msgid "You can put here your personal notes. This text will be added to the G-code header comments." msgstr "여기에 개인 메모를 넣을 수 있습니다. 이 텍스트는 Gcode 헤더 설명에 추가됩니다." msgid "Host Type" msgstr "호스트 유형" msgid "Orca Slicer can upload G-code files to a printer host. This field must contain the kind of the host." msgstr "Orca Slicer은 Gcode 파일을 프린터 호스트에 업로드할 수 있습니다. 이 필드는 호스트의 종류를 포함해야 합니다." msgid "Nozzle volume" msgstr "노즐 부피" msgid "Volume of nozzle between the filament cutter and the end of the nozzle" msgstr "커터와 노즐 끝단 사이의 노즐 부피" msgid "Cooling tube position" msgstr "냉각 튜브 위치" msgid "Distance of the center-point of the cooling tube from the extruder tip." msgstr "압출기 끝에서 냉각 튜브 중심점까지의 거리입니다." msgid "Cooling tube length" msgstr "냉각 튜브 길이" msgid "Length of the cooling tube to limit space for cooling moves inside it." msgstr "제한된 냉각 공간에서 필라멘트를 이동하기 위한 냉각 튜브의 길이입니다." msgid "High extruder current on filament swap" msgstr "필라멘트 교체 시 높은 압출기 전류" msgid "It may be beneficial to increase the extruder motor current during the filament exchange sequence to allow for rapid ramming feed rates and to overcome resistance when loading a filament with an ugly shaped tip." msgstr "필라멘트 교체 순서 중에 압출기 모터 전류를 증가시켜 빠른 채워넣기 공급 속도를 허용하고 보기 흉한 모양의 팁이 있는 필라멘트를 로드할 때 저항을 극복하는 데 이점이 있습니다." msgid "Filament parking position" msgstr "필라멘트 주차 위치" msgid "Distance of the extruder tip from the position where the filament is parked when unloaded. This should match the value in printer firmware." msgstr "언로드시 필라멘트가 고정되는 위치에서 압출기 끝까지의 거리입니다. 이는 프린터 펌웨어의 값과 일치해야 합니다." msgid "Extra loading distance" msgstr "추가 압출 거리" msgid "When set to zero, the distance the filament is moved from parking position during load is exactly the same as it was moved back during unload. When positive, it is loaded further, if negative, the loading move is shorter than unloading." msgstr "0으로 설정하면 압출 중에 필라멘트가 파킹 위치에서 이동한 거리는 언로드 중에 다시 이동한 거리와 정확히 동일합니다. 양수이면 더 많이 압출되고, 음수이면 압출 이동이 언로드 이동보다 짧습니다." msgid "Start end points" msgstr "시작점과 끝점" msgid "The start and end points which are from the cutter area to the excess chute." msgstr "절단 영역에서 버릴 영역까지의 시작점과 끝점." msgid "Reduce infill retraction" msgstr "채우기 후퇴 감소" # AI Translated msgid "Don't retract when the travel is entirely within an infill area. That means the oozing can't been seen. This can reduce times of retraction for complex model and save printing time, but make slicing and G-code generating slower. Note that z-hop is also not performed in areas where retraction is skipped." msgstr "이동 경로가 완전히 채우기 영역 안에 있으면 후퇴하지 않습니다. 흘러내림이 보이지 않기 때문입니다. 복잡한 모델에서 후퇴 횟수를 줄여 출력 시간을 절약할 수 있지만 슬라이싱과 G-code 생성 속도는 느려집니다. 후퇴를 건너뛴 영역에서는 Z 올리기도 수행되지 않습니다." msgid "This option will drop the temperature of the inactive extruders to prevent oozing." msgstr "이 옵션은 비활성 압출기의 온도를 낮추어 스며드는 것을 방지합니다." msgid "Filename format" msgstr "파일 이름 형식" msgid "Users can decide project file names when exporting." msgstr "사용자가 내보낼 파일 이름을 자체 정의할 수 있습니다" msgid "Make overhangs printable" msgstr "오버행 형상 변경" msgid "Modify the geometry to print overhangs without support material." msgstr "서포트 없이 오버행를 출력하도록 형상을 수정합니다." msgid "Make overhangs printable - Maximum angle" msgstr "오버행 형상 변경 최대 각도" msgid "Maximum angle of overhangs to allow after making more steep overhangs printable.90° will not change the model at all and allow any overhang, while 0 will replace all overhangs with conical material." msgstr "더 가파른 오버행를 출력할 수 있게 허용되는 오버행의 최대 각도. 90°는 형상을 전혀 변경하지 않고 오버행를 허용하는 반면, 0은 모든 오버행를 원뿔형 재료로 대체합니다." msgid "Make overhangs printable - Hole area" msgstr "오버행 형상 변경 구멍 영역" msgid "Maximum area of a hole in the base of the model before it's filled by conical material. A value of 0 will fill all the holes in the model base." msgstr "원뿔형 재료로 채워지기 전에 모델 베이스에 있는 구멍의 최대 면적입니다. 값이 0이면 모델 베이스의 모든 구멍이 채워집니다." msgid "Detect overhang walls" msgstr "오버행 벽 감지" #, c-format, boost-format msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used." msgstr "선 너비에 비례하여 오버행 백분율을 감지하고 다른 속도를 사용하여 출력합니다. 100%% 오버행의 경우 브릿지 속도가 사용됩니다." # AI Translated msgid "Outer walls" msgstr "외벽" # AI Translated msgid "" "Filament to print outer walls.\n" "\"Default\" uses the active object/part filament." msgstr "" "외벽을 출력할 필라멘트입니다.\n" "\"기본값\"은 활성 객체/부품의 필라멘트를 사용합니다." # AI Translated msgid "Inner walls" msgstr "내벽" # AI Translated msgid "" "Filament to print inner walls.\n" "\"Default\" uses the active object/part filament." msgstr "" "내벽을 출력할 필라멘트입니다.\n" "\"기본값\"은 활성 객체/부품의 필라멘트를 사용합니다." msgid "Line width of inner wall. If expressed as a %, it will be computed over the nozzle diameter." msgstr "내벽의 선 너비. %로 입력 시 노즐 직경에 대한 비율로 계산됩니다." msgid "This is the speed for inner walls." msgstr "내벽 속도" msgid "This is the number of walls per layer." msgstr "모든 레이어의 벽 수" msgid "Alternate extra wall" msgstr "대체 추가 벽" msgid "" "This setting adds an extra wall to every other layer. This way the infill gets wedged vertically between the walls, resulting in stronger prints.\n" "\n" "When this option is enabled, the ensure vertical shell thickness option needs to be disabled.\n" "\n" "Using lightning infill together with this option is not recommended as there is limited infill to anchor the extra perimeters to." msgstr "" "이 설정은 다른 모든 레이어에 추가 벽을 추가합니다. 이렇게 하면 충전재가 벽 사이에 수직으로 끼워져 더 강한 출력물을 얻을 수 있습니다.\n" "\n" "이 옵션이 활성화되면 수직 쉘 두께 확인 옵션을 비활성화해야 합니다.\n" "\n" "추가 경계를 고정할 채우기가 제한되어 있으므로 이 옵션과 함께 번개 채우기를 사용하는 것은 권장되지 않습니다." msgid "If you want to process the output G-code through custom scripts, just list their absolute paths here. Separate multiple scripts with a semicolon. Scripts will be passed the absolute path to the G-code file as the first argument, and they can access the Orca Slicer config settings by reading environment variables." msgstr "사용자 정의 스크립트를 통해 출력 Gcode를 처리하려면 여기에 절대 경로를 나열하세요. 여러 스크립트는 세미콜론(;)으로 구분합니다. 스크립트는 Gcode 파일의 절대 경로를 첫 번째 값으로 전달하며 환경 변수를 읽어 Orca Slicer 구성 설정에 접근할 수 있습니다." # AI Translated msgid "Change extrusion role G-code (process)" msgstr "압출 역할 변경 G-code(프로세스)" # AI Translated msgid "This G-code is inserted when the extrusion role is changed. It runs after the machine and filament extrusion role G-code." msgstr "압출 역할이 변경될 때 이 G-code가 삽입됩니다. 장비 및 필라멘트의 압출 역할 G-code 이후에 실행됩니다." # AI Translated msgid "Plugins Used" msgstr "사용된 플러그인" # AI Translated msgid "Plugin capabilities referenced by this preset, stored as name;uuid;capability." msgstr "이 사전 설정이 참조하는 플러그인 기능으로, name;uuid;capability 형식으로 저장됩니다." # AI Translated msgid "Python plugin(s) invoked at each slicing pipeline step to read and modify intermediate slicing data, including a final G-code post-processing step. Research/experimental." msgstr "슬라이싱 파이프라인의 각 단계에서 호출되어 중간 슬라이싱 데이터를 읽고 수정하는 Python 플러그인입니다. 마지막 G-code 후처리 단계도 포함됩니다. 연구/실험용입니다." msgid "Printer type" msgstr "프린터 유형" msgid "Type of the printer." msgstr "프린터 유형" msgid "Printer notes" msgstr "프린터 메모" msgid "You can put your notes regarding the printer here." msgstr "여기에 프린터에 관한 메모를 넣을 수 있습니다." msgid "Printer variant" msgstr "프린터 변형" msgid "Raft contact Z distance" msgstr "라프트 접점 Z 거리" msgid "Z gap between raft and object. If Support Top Z Distance is 0, this value is ignored and the object is printed in direct contact with the raft (no gap)." msgstr "래프트와 객체 사이의 Z 간격. 서포트 상단 Z 거리가 0이면 이 값은 무시되고 객체는 래프트에 직접 접촉하여 출력됩니다(간격 없음)." msgid "Raft expansion" msgstr "라프트 확장" msgid "This expands all raft layers in XY plane." msgstr "XY 평면에서 모든 라프트 레이어 확장" msgid "First layer density" msgstr "초기 레이어 밀도" msgid "This is the density of the first raft or support layer." msgstr "첫 번째 라프트 또는 서포트의 밀도" msgid "First layer expansion" msgstr "초기 레이어 확장" msgid "This expands the first raft or support layer to improve bed adhesion." msgstr "베드 플레이트 안착을 향상시키기 위해 첫 번째 라프트 또는 서포트 확장" msgid "Raft layers" msgstr "라프트 레이어" msgid "Object will be raised by this number of support layers. Use this function to avoid warping when printing ABS." msgstr "객체를 이 레이어 수 많큼 들어올립니다. 이 기능을 사용하여 ABS 출력 시 뒤틀림(워핑)을 방지합니다" msgid "The G-code path is generated after simplifying the contour of models to avoid too many points and G-code lines. Smaller values mean higher resolution and more time required to slice." msgstr "Gcode 경로는 너무 많은 점과 Gcode 선을 피하기 위해 모델의 윤곽을 단순화한 후 생성됩니다. 값이 작을수록 해상도가 높아지고 슬라이스에 더 많은 시간이 소요됩니다." msgid "Travel distance threshold" msgstr "이동 거리 임계값" msgid "Only trigger retraction when the travel distance is longer than this threshold." msgstr "이동 거리가 이 임계값보다 긴 경우에만 후퇴를 실행합니다" msgid "Retract amount before wipe" msgstr "노즐 청소 전 후퇴량" # AI Translated msgid "This is the length of fast retraction before a wipe, relative to retraction length." msgstr "노즐 청소 전 빠른 후퇴 길이이며, 후퇴 길이에 대한 상대값입니다." # AI Translated msgid "Retract amount after wipe" msgstr "노즐 청소 후 후퇴량" # AI Translated #, no-c-format, no-boost-format msgid "" "The length of fast retraction after wipe, relative to retraction length.\n" "The value will be clamped by 100% minus the retract amount before the wipe value." msgstr "" "노즐 청소 후 빠른 후퇴의 길이로, 후퇴 길이를 기준으로 합니다.\n" "이 값은 100%에서 노즐 청소 전 후퇴량을 뺀 값으로 제한됩니다." msgid "Retract on layer change" msgstr "레이어 변경 시 후퇴" msgid "This forces a retraction on layer changes." msgstr "레이어 변경 시 강제로 후퇴를 실행합니다" msgid "Retraction Length" msgstr "후퇴 길이" msgid "Some amount of material in extruder is pulled back to avoid ooze during long travel. Set zero to disable retraction." msgstr "긴 이동 중에 필라멘트가 흘러나오는 것을 방지하기 위해 압출기의 일정량의 재료를 뒤로 당깁니다. 후퇴를 비활성화하려면 0을 설정하세요" msgid "Long retraction when cut (beta)" msgstr "절단 시 긴 후퇴(실험적)" msgid "Experimental feature: Retracting and cutting off the filament at a longer distance during changes to minimize purge. While this reduces flush significantly, it may also raise the risk of nozzle clogs or other printing problems." msgstr "실험적 기능. 퍼지를 최소화하기 위해 변경하는 동안 더 먼 거리에서 필라멘트를 집어넣고 절단합니다. 이렇게 하면 플러시가 크게 줄어들지만 노즐 막힘이나 기타 출력 문제가 발생할 위험이 높아질 수도 있습니다." msgid "Retraction distance when cut" msgstr "절단 시 후퇴 거리" msgid "Experimental feature: Retraction length before cutting off during filament change." msgstr "실험적 기능. 필라멘트 교체 시 절단 전 후퇴 길이." msgid "Long retraction when extruder change" msgstr "압출기 교체 시 긴 수축" msgid "Retraction distance when extruder change" msgstr "압출기 교체 시 수축 거리" msgid "Z-hop height" msgstr "Z올리기 높이" msgid "Whenever there is a retraction, the nozzle is lifted a little to create clearance between the nozzle and the print. This prevents the nozzle from hitting the print when traveling more. Using spiral lines to lift z can prevent stringing." msgstr "후퇴가 완료될 때마다 노즐이 약간 올라가서 노즐과 출력물 사이에 간격이 생깁니다. 이동 시 노즐이 출력물에 닿는 것을 방지합니다. 나선형 선을 사용하여 z를 들어 올리면 스트링 현상을 방지할 수 있습니다" msgid "Z-hop lower boundary" msgstr "Z 올리기 하한 경계" msgid "Z-hop will only come into effect when Z is above this value and is below the parameter: \"Z-hop upper boundary\"." msgstr "Z 올리기는 Z가 이 값보다 크고 \"Z 올리기 상한 경계\" 매개변수 아래인 경우에만 적용됩니다." msgid "Z-hop upper boundary" msgstr "Z 올리기 상한 경계" msgid "If this value is positive, Z-hop will only come into effect when Z is above the parameter: \"Z-hop lower boundary\" and is below this value." msgstr "이 값이 양수인 경우 Z 올리기는 Z가 매개변수 \"Z 올리기 하한 경계\"보다 높고 이 값보다 낮을 때만 적용됩니다" msgid "Z-hop type" msgstr "Z올리기 유형" # AI Translated msgid "Type of Z-hop." msgstr "Z 올리기 유형입니다." msgid "Slope" msgstr "경사" msgid "Spiral" msgstr "나선형" msgid "Traveling angle" msgstr "이동 각도" msgid "Traveling angle for Slope and Spiral Z-hop type. Setting it to 90° results in Normal Lift." msgstr "경사나 나선형 Z 올리기 유형에 사용할 이동 각도입니다. 90°로 설정할 경우 일반적인 Z 올리기가 적용됩니다." msgid "Only lift Z above" msgstr "Z값 위에서만 올리기" msgid "If you set this to a positive value, Z lift will only take place above the specified absolute Z." msgstr "이 값을 양의 값으로 설정하면 Z 올리기는 지정된 Z의 절대값 위에서만 발생합니다." msgid "Only lift Z below" msgstr "Z값 아래에서만 올리기" msgid "If you set this to a positive value, Z lift will only take place below the specified absolute Z." msgstr "이 값을 양의 값으로 설정하면 Z 올리기는 지정된 Z의 절대값 아래에서만 발생합니다." msgid "On surfaces" msgstr "표면에서" msgid "Enforce Z-Hop behavior. This setting is impacted by the above settings (Only lift Z above/below)." msgstr "Z 올리기 동작을 수행합니다. 이 설정은 위의 설정의 영향을 받습니다 (위에서/아래에서만 Z 올리기)." msgid "All Surfaces" msgstr "모든 표면" msgid "Top Only" msgstr "상단 표면" msgid "Bottom Only" msgstr "하단 표면만" msgid "Top and Bottom" msgstr "상단 및 하단 표면" msgid "Direct Drive" msgstr "직접 드라이브" msgid "Bowden" msgstr "보우덴" msgid "Hybrid" msgstr "하이브리드" # AI Translated msgid "Enable filament dynamic map" msgstr "필라멘트 동적 매핑 활성화" # AI Translated msgid "Enable dynamic filament mapping during print." msgstr "출력 중 동적 필라멘트 매핑을 활성화합니다." # AI Translated msgid "Has filament switcher" msgstr "필라멘트 스위처 있음" # AI Translated msgid "Printer has a filament switcher hardware (e.g., AMS)." msgstr "프린터에 필라멘트 스위처 하드웨어(예: AMS)가 있습니다." msgid "Extra length on restart" msgstr "재 시작 시 추가 길이" msgid "When the retraction is compensated after the travel move, the extruder will push this additional amount of filament. This setting is rarely needed." msgstr "이동 후 후퇴가 보상되면 압출기는 이 추가 양의 필라멘트를 밀어냅니다. 이 설정은 거의 필요하지 않습니다." msgid "When the retraction is compensated after changing tool, the extruder will push this additional amount of filament." msgstr "툴 체인지 후 후퇴가 보상되면 압출기는 이 추가 양의 필라멘트를 밀어냅니다." msgid "Retraction speed" msgstr "후퇴 속도" # AI Translated msgid "Speed for retracting filament from the nozzle." msgstr "노즐에서 필라멘트를 후퇴시키는 속도입니다." msgid "Deretraction speed" msgstr "후퇴 복귀 속도" # AI Translated msgid "Speed for reloading filament into the nozzle. Zero means same speed of retraction." msgstr "노즐로 필라멘트를 다시 넣는 속도입니다. 0이면 후퇴 속도와 동일합니다." # AI Translated msgid "Deretraction speed (extruder change)" msgstr "후퇴 복귀 속도(압출기 교체)" # AI Translated msgid "Speed for reloading filament into the nozzle when switching extruder." msgstr "압출기를 전환할 때 노즐로 필라멘트를 다시 넣는 속도입니다." msgid "Use firmware retraction" msgstr "펌웨어 리트렉션 사용" msgid "This experimental setting uses G10 and G11 commands to have the firmware handle the retraction. This is only supported in recent Marlin." msgstr "이 실험적 설정은 G10 및 G11 명령을 사용하여 펌웨어가 후퇴를 처리하도록 합니다. 이것은 최근의 Marlin에서만 지원됩니다." msgid "Show auto-calibration marks" msgstr "자동 교정 기호 표시" msgid "Disable set remaining print time" msgstr "설정된 남은 출력 시간 비활성화" msgid "Disable generating of the M73: Set remaining print time in the final G-code." msgstr "M73 생성 비활성화: 최종 Gcode에 남은 출력 시간을 설정합니다." msgid "Seam position" msgstr "재봉선 위치" msgid "This is the starting position for each part of the outer wall." msgstr "외벽 각 부분의 출력 시작 위치" msgid "Nearest" msgstr "근접" msgid "Aligned" msgstr "정렬" # AI Translated msgid "Aligned back" msgstr "뒤쪽 정렬" msgid "Back" msgstr "뒷면" msgid "Random" msgstr "무작위" msgid "Staggered inner seams" msgstr "엇갈린 내부 재봉선" msgid "This option causes the inner seams to be shifted backwards based on their depth, forming a zigzag pattern." msgstr "이 옵션을 사용하면 내부 재봉선의 깊이에 따라 뒤로 이동하여 지그재그 패턴을 형성합니다." msgid "Seam gap" msgstr "재봉선 간격" msgid "" "In order to reduce the visibility of the seam in a closed loop extrusion, the loop is interrupted and shortened by a specified amount.\n" "This amount can be specified in millimeters or as a percentage of the current extruder diameter. The default value for this parameter is 10%." msgstr "" "폐쇄 루프 압출에서 재봉선의 가시성을 줄이기 위해 루프가 중단되고 지정된 양만큼 짧아집니다.\n" "이 양은 mm로 지정하거나 현재 압출기 직경의 백분율로 지정할 수 있습니다. 이 매개 변수의 기본값은 10%입니다." msgid "Scarf joint seam (beta)" msgstr "스카프 조인트 재봉선(베타)" msgid "Use scarf joint to minimize seam visibility and increase seam strength." msgstr "재봉선 가시성을 최소화하고 재봉선 강도를 높이려면 스카프 조인트를 사용하십시오." msgid "Conditional scarf joint" msgstr "조건부 스카프 조인트" msgid "Apply scarf joints only to smooth perimeters where traditional seams do not conceal the seams at sharp corners effectively." msgstr "전통적인 재봉선가 날카로운 모서리의 재봉선를 효과적으로 숨기지 않는 매끄러운 둘레에만 스카프 조인트를 적용하십시오." msgid "Conditional angle threshold" msgstr "조건부 각도 임계값" msgid "" "This option sets the threshold angle for applying a conditional scarf joint seam.\n" "If the maximum angle within the perimeter loop exceeds this value (indicating the absence of sharp corners), a scarf joint seam will be used. The default value is 155°." msgstr "" "이 옵션은 조건부 스카프 접합 재봉선를 적용하기 위한 임계값 각도를 설정합니다.\n" "주변 루프 내의 최대 각도가 이 값을 초과하는 경우(뾰족한 모서리가 없음을 나타냄) 스카프 조인트 재봉선가 사용됩니다. 기본값은 155°입니다." msgid "Conditional overhang threshold" msgstr "조건부 오버행 임계값" #, no-c-format, no-boost-format msgid "This option determines the overhang threshold for the application of scarf joint seams. If the unsupported portion of the perimeter is less than this threshold, scarf joint seams will be applied. The default threshold is set at 40% of the external wall's width. Due to performance considerations, the degree of overhang is estimated." msgstr "이 옵션은 스카프 조인트 이음새 적용을 위한 돌출 임계값을 결정합니다. 둘레의 지지되지 않은 부분이 이 임계값보다 작으면 스카프 조인트 심이 적용됩니다. 기본 임계값은 외벽 너비의 40% of로 설정됩니다. 성능 고려 사항으로 인해 돌출 정도가 추정됩니다." msgid "Scarf joint speed" msgstr "스카프 조인트 속도" msgid "This option sets the printing speed for scarf joints. It is recommended to print scarf joints at a slow speed (less than 100 mm/s). It's also advisable to enable 'Extrusion rate smoothing' if the set speed varies significantly from the speed of the outer or inner walls. If the speed specified here is higher than the speed of the outer or inner walls, the printer will default to the slower of the two speeds. When specified as a percentage (e.g., 80%), the speed is calculated based on the respective outer or inner wall speed. The default value is set to 100%." msgstr "이 옵션은 스카프 조인트의 출력 속도를 설정합니다. 스카프 조인트를 느린 속도(100mm/s 미만)로 출력하는 것이 좋습니다. 또한 설정 속도가 외벽 또는 내벽의 속도와 크게 다른 경우 '압출 속도 평탄화'를 활성화하는 것이 좋습니다. 여기에 지정된 속도가 외부 또는 내부 벽의 속도보다 높을 경우 프린터는 기본적으로 두 가지 속도 중 더 느린 속도로 설정됩니다. 백분율(예: 80%)로 지정되면 속도는 각각의 외부 또는 내부 벽 속도를 기준으로 계산됩니다. 기본값은 100%로 설정되어 있습니다." msgid "Scarf joint flow ratio" msgstr "스카프 조인트 압출량 비율" msgid "This factor affects the amount of material for scarf joints." msgstr "이 요소는 스카프 조인트의 재료 양에 영향을 미칩니다." msgid "Scarf start height" msgstr "스카프 시작 높이" msgid "" "Start height of the scarf.\n" "This amount can be specified in millimeters or as a percentage of the current layer height. The default value for this parameter is 0." msgstr "" "스카프의 시작 높이.\n" "이 양은 mm 또는 현재 레이어 높이의 백분율로 지정할 수 있습니다. 이 매개변수의 기본값은 0입니다." msgid "Scarf around entire wall" msgstr "전체 벽 주위에 스카프" msgid "The scarf extends to the entire length of the wall." msgstr "스카프는 벽 전체 길이까지 확장됩니다." msgid "Scarf length" msgstr "스카프 길이" msgid "Length of the scarf. Setting this parameter to zero effectively disables the scarf." msgstr "스카프의 길이. 이 매개변수를 0으로 설정하면 스카프가 효과적으로 비활성화됩니다." msgid "Scarf steps" msgstr "스카프 단계" msgid "Minimum number of segments of each scarf." msgstr "각 스카프의 최소 세그먼트 수입니다." msgid "Scarf joint for inner walls" msgstr "내벽용 스카프 조인트" msgid "Use scarf joint for inner walls as well." msgstr "내벽에도 스카프 조인트를 사용하십시오." msgid "Role base wipe speed" msgstr "역할 기반 노즐 청소 속도" msgid "The wipe speed is determined by the speed of the current extrusion role. e.g. if a wipe action is executed immediately following an outer wall extrusion, the speed of the outer wall extrusion will be utilized for the wipe action." msgstr "노즐 청소 속도는 현재 압출기의 속도에 따라 결정됩니다. 예)외벽 압출 직후에 노즐 청소 동작을 실행하면 외벽 압출 속도가 노즐 청소에 사용됩니다." msgid "Wipe on loops" msgstr "루프에서 노즐 청소" msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop." msgstr "폐쇄 루프 압출에서 재봉선의 가시성을 최소화하기 위해 압출기가 루프를 떠나기 전에 안쪽으로의 작은 이동이 실행됩니다." msgid "Wipe before external loop" msgstr "외부 루프 전 닦아내기" msgid "" "To minimize visibility of potential overextrusion at the start of an external perimeter when printing with Outer/Inner or Inner/Outer/Inner wall print order, the de-retraction is performed slightly on the inside from the start of the external perimeter. That way any potential over extrusion is hidden from the outside surface.\n" "\n" "This is useful when printing with Outer/Inner or Inner/Outer/Inner wall print order as in these modes it is more likely an external perimeter is printed immediately after a de-retraction move." msgstr "" "외부/내부 또는 내부/외부/내부 벽 출력 순서로 출력할 때 외부 둘레 시작 부분에서 잠재적인 과잉 압출의 가시성을 최소화하기 위해 외부 둘레 시작 부분에서 내부에 후퇴가 약간 수행됩니다. 이렇게 하면 압출에 대한 모든 잠재력이 외부 표면에서 숨겨집니다.\n" "\n" "외부/내부 또는 내부/외부/내부 벽 출력 순서로 출력할 때 유용합니다. 이러한 모드에서는 후퇴 이동 직후 외부 둘레가 출력될 가능성이 더 높기 때문입니다." msgid "Wipe speed" msgstr "노즐 청소 속도" msgid "The wipe speed is determined by the speed setting specified in this configuration. If the value is expressed as a percentage (e.g. 80%), it will be calculated based on the travel speed setting above. The default value for this parameter is 80%." msgstr "노즐 청소 속도는 이 구성에 지정된 속도 설정에 따라 결정됩니다. 값이 백분율(예: 80%)로 표시되면 이동 속도 설정을 기준으로 계산됩니다. 이 매개 변수의 기본값은 80%입니다." msgid "Skirt distance" msgstr "스커트 거리" msgid "This is the distance from the skirt to the brim or the object." msgstr "스커트와 브림 또는 객체와의 거리" msgid "Skirt start point" msgstr "스커트 시작점" msgid "Angle from the object center to skirt start point. Zero is the most right position, counter clockwise is positive angle." msgstr "객체 중심에서 스커트 시작점까지의 각도입니다. 0은 가장 올바른 위치이고 시계 반대 방향은 양의 각도입니다." msgid "Skirt height" msgstr "스커트 높이" msgid "Number of skirt layers: usually only one" msgstr "얼마나 많은 스커트 레이어를 생성할지 결정합니다. 일반적으로 한개의 레이어를 사용합니다" # AI Translated msgid "Single loop after first layer" msgstr "초기 레이어 이후 단일 루프" # AI Translated msgid "Limits the skirt/draft shield loops to one wall after the first layer. This is useful, on occasion, to conserve filament but may cause the draft shield/skirt to warp / crack." msgstr "초기 레이어 이후 스커트/드래프트 실드의 루프를 벽 하나로 제한합니다. 필라멘트를 절약하는 데 유용할 수 있지만 드래프트 실드/스커트가 휘거나 갈라질 수 있습니다." msgid "Draft shield" msgstr "드래프트 실드" msgid "" "A draft shield is useful to protect an ABS or ASA print from warping and detaching from print bed due to wind draft. It is usually needed only with open frame printers, i.e. without an enclosure.\n" "\n" "Enabled = skirt is as tall as the highest printed object. Otherwise 'Skirt height' is used.\n" "Note: With the draft shield active, the skirt will be printed at skirt distance from the object. Therefore, if brims are active it may intersect with them. To avoid this, increase the skirt distance value.\n" msgstr "" "드래프트 실드는 바람으로 인해 ABS 또는 ASA 출력물이 뒤틀리거나 출력 베드에서 분리되는 것을 방지하는 데 유용합니다. 일반적으로 오픈 프레임 프린터, 즉 인클로저가 없는 경우에만 필요합니다.\n" "\n" "활성화 = 스커트가 가장 높은 출력물의 높이와 같습니다. 그렇지 않으면 '스커트 높이'가 사용됩니다.\n" "참고: 드래프트 실드가 활성화되면 스커트는 객체로부터 스커트 거리에 출력됩니다. 따라서 챙이 활성화된 경우 챙과 교차할 수 있습니다. 이를 방지하려면 스커트 거리 값을 늘리십시오.\n" msgid "Enabled" msgstr "활성화" msgid "Skirt type" msgstr "스커트 유형" msgid "Combined - single skirt for all objects, Per object - individual object skirt." msgstr "결합 - 모든 객체에 대한 단일 스커트, 객체별 - 개별 객체 스커트." msgid "Per object" msgstr "객체당" msgid "Skirt loops" msgstr "스커트 루프" msgid "This is the number of loops for the skirt. 0 means the skirt is disabled." msgstr "스커트의 루프 수입니다. 0은 스커트 비활성화를 의미합니다" msgid "Skirt speed" msgstr "스커트 속도" msgid "Speed of skirt, in mm/s. Zero means use default layer extrusion speed." msgstr "스커트의 속도(mm/s), 0은 기본 레이어 압출 속도를 사용함을 의미합니다." msgid "Skirt minimum extrusion length" msgstr "스커트 최소 돌출 길이" msgid "" "Minimum filament extrusion length in mm when printing the skirt. Zero means this feature is disabled.\n" "\n" "Using a non-zero value is useful if the printer is set up to print without a prime line.\n" "Final number of loops is not taking into account while arranging or validating objects distance. Increase loop number in such case." msgstr "" "스커트를 출력할 때 최소 필라멘트 압출 길이(mm)입니다. 0은 이 기능이 비활성화되었음을 의미합니다.\n" "\n" "프린터가 프라임 라인 없이 출력하도록 설정된 경우 0이 아닌 값을 사용하는 것이 유용합니다.\n" "루프의 최종 수는 객체 거리를 정렬하거나 검증하는 동안 고려되지 않습니다. 그러한 경우에는 루프 수를 늘리십시오." msgid "The printing speed in exported G-code will be slowed down when the estimated layer time is shorter than this value in order to get better cooling for these layers." msgstr "Gcode의 출력 속도는 예상 레이어 시간이 이 값보다 짧은 경우 레이어의 냉각을 개선하기 위해 느려집니다." msgid "Minimum sparse infill threshold" msgstr "최소 드문 채우기 임계값" msgid "Sparse infill areas which are smaller than this threshold value are replaced by internal solid infill." msgstr "임계값보다 작은 드문 채우기 영역은 꽉찬 내부 채우기로 대체됩니다" # AI Translated msgid "" "Filament to print internal solid infill.\n" "\"Default\" uses the active object/part filament." msgstr "" "꽉찬 내부 채우기를 출력할 필라멘트입니다.\n" "\"기본값\"은 활성 객체/부품의 필라멘트를 사용합니다." # AI Translated msgid "" "Filament to print top surface.\n" "\"Default\" uses the active object/part filament." msgstr "" "상단 표면을 출력할 필라멘트입니다.\n" "\"기본값\"은 활성 객체/부품의 필라멘트를 사용합니다." # AI Translated msgid "" "Filament to print bottom surface.\n" "\"Default\" uses the active object/part filament." msgstr "" "하단 표면을 출력할 필라멘트입니다.\n" "\"기본값\"은 활성 객체/부품의 필라멘트를 사용합니다." msgid "Line width of internal solid infill. If expressed as a %, it will be computed over the nozzle diameter." msgstr "꽉찬 내부 채우기 선 너비. %로 입력 시 노즐 직경에 대한 비율로 계산됩니다." msgid "This is the speed for internal solid infill, not including the top or bottom surface." msgstr "상단 및 하단 표면을 제외한 꽉찬 내부 채우기 속도" msgid "This enables spiraling, which smooths out the Z moves of the outer contour and turns a solid model into a single walled print with solid bottom layers. The final generated model has no seam." msgstr "나선형은 외부 윤곽선의 z 이동을 부드럽게 합니다. 그리고 객체를 꽉찬 하단 레이어가 있는 단일 벽으로 출력합니다. 최종 생성된 출력물에는 재봉선가 없습니다" msgid "Smooth Spiral" msgstr "부드러운 나선형" msgid "Smooth Spiral smooths out X and Y moves as well, resulting in no visible seam at all, even in the XY directions on walls that are not vertical." msgstr "부드러운 나선형은 X와 Y의 움직임을 매끄럽게 처리하여 수직이 아닌 벽의 XY 방향에서도 이음새가 전혀 보이지 않습니다" msgid "Max XY Smoothing" msgstr "최대 XY 스무딩" #, no-c-format, no-boost-format msgid "Maximum distance to move points in XY to try to achieve a smooth spiral. If expressed as a %, it will be computed over nozzle diameter." msgstr "부드러운 나선형을 얻기 위해 점을 XY로 이동하는 최대 거리 %로 표시할 경우 노즐 직경에 대해 계산됩니다" msgid "Spiral starting flow ratio" msgstr "나선형 시작 유량비" #, no-c-format, no-boost-format msgid "Sets the starting flow ratio while transitioning from the last bottom layer to the spiral. Normally the spiral transition scales the flow ratio from 0% to 100% during the first loop which can in some cases lead to under extrusion at the start of the spiral." msgstr "마지막 하단 레이어에서 나선형으로 전환하는 동안 시작 압출량 비율을 설정합니다. 일반적으로 나선형 전환은 첫 번째 루프 동안 압출량 비율을 0% 에서 100% 로 스케일링하므로 경우에 따라 나선형 시작 시 압출이 미달될 수 있습니다." msgid "Spiral finishing flow ratio" msgstr "나선형 종료 유량비" #, no-c-format, no-boost-format msgid "Sets the finishing flow ratio while ending the spiral. Normally the spiral transition scales the flow ratio from 100% to 0% during the last loop which can in some cases lead to under extrusion at the end of the spiral." msgstr "나선형을 끝내는 동안 마무리 압출량을 설정합니다. 일반적으로 나선형 전환은 마지막 루프 동안 압출량 비율을 100% 에서 0% 로 스케일링하므로 경우에 따라 나선형 끝에서 압출이 미달될 수 있습니다." msgid "If smooth or traditional mode is selected, a timelapse video will be generated for each print. After each layer is printed, a snapshot is taken with the chamber camera. All of these snapshots are composed into a timelapse video when printing completes. If smooth mode is selected, the toolhead will move to the excess chute after each layer is printed and then take a snapshot. Since the melt filament may leak from the nozzle during the process of taking a snapshot, a prime tower is required for smooth mode to wipe the nozzle." msgstr "유연 또는 기존 모드를 선택한 경우 각 출력에 대해 타임랩스 비디오가 생성됩니다. 각 레이어가 출력된 후 챔버 카메라로 스냅샷을 찍습니다. 이 모든 스냅샷은 출력이 완료되면 타임랩스 비디오로 구성됩니다. 유연 모드를 선택하면 각 레이어가 출력된 후 툴 헤드가 여유 공간으로 이동한 다음 스냅샷을 찍습니다. 스냅샷을 찍는 과정에서 노즐에서 녹은 필라멘트가 새어 나올 수 있기 때문에 유연 모드에서 노즐을 닦으려면 프라임 타워가 필요합니다." msgid "Traditional" msgstr "기존" msgid "Smooth" msgstr "유연" # AI Translated msgid "Farthest point timelapse" msgstr "최원점 타임랩스" # AI Translated msgid "When enabled, the timelapse snapshot is taken at the farthest point from camera instead of traveling to the wipe tower or excess chute. Only effective in traditional timelapse mode on non-I3 printers." msgstr "활성화하면 프라임 타워나 배출 슈트로 이동하는 대신 카메라에서 가장 먼 지점에서 타임랩스 스냅샷을 촬영합니다. I3 방식이 아닌 프린터의 기존 타임랩스 모드에서만 적용됩니다." msgid "Temperature variation" msgstr "온도 가변" #. TRN PrintSettings : "Ooze prevention" > "Temperature variation" msgid "Temperature difference to be applied when an extruder is not active. The value is not used when 'idle_temperature' in filament settings is set to non-zero value." msgstr "압출기가 작동하지 않을 때 적용되는 온도차입니다. 필라멘트 설정의 'idle_temp'가 0이 아닌 값으로 설정된 경우 해당 값은 사용되지 않습니다." msgid "∆℃" msgstr "∆℃" msgid "Preheat time" msgstr "예열시간" msgid "To reduce the waiting time after tool change, Orca can preheat the next tool while the current tool is still in use. This setting specifies the time in seconds to preheat the next tool. Orca will insert a M104 command to preheat the tool in advance." msgstr "툴 체인지 후 대기 시간을 줄이기 위해 Orca는 현재 도구가 계속 사용되는 동안 다음 도구를 예열할 수 있습니다. 이 설정은 다음 도구를 예열하는 시간을 초 단위로 지정합니다. Orca는 도구를 미리 예열하기 위해 M104 명령을 삽입합니다." msgid "Preheat steps" msgstr "예열 단계" msgid "Insert multiple preheat commands (e.g. M104.1). Only useful for Prusa XL. For other printers, please set it to 1." msgstr "여러 예열 명령(예: M104.1)을 삽입하세요. Prusa XL에만 유용합니다. 다른 프린터의 경우 1로 설정하세요." # AI Translated msgid "G-code written at the very top of the output file, before any other content. Useful for adding metadata that printer firmware reads from the first lines of the file (e.g. estimated print time, filament usage). Supports placeholders like {print_time_sec} and {used_filament_length}." msgstr "출력 파일의 가장 앞부분, 다른 모든 내용보다 먼저 기록되는 G-code입니다. 프린터 펌웨어가 파일의 첫 줄에서 읽는 메타데이터(예: 예상 출력 시간, 필라멘트 사용량)를 추가하는 데 유용합니다. {print_time_sec}, {used_filament_length}와 같은 자리 표시자를 지원합니다." msgid "Start G-code" msgstr "시작 Gcode" msgid "G-code added when starting a print." msgstr "출력을 시작할 때의 Gcode" msgid "G-code added when the printer starts using this filament" msgstr "이 필라멘트의 출력을 시작할 때의 시작 Gcode" msgid "Single Extruder Multi Material" msgstr "단일 압출기 다중 재료" msgid "Use single nozzle to print multi filament." msgstr "단일 노즐을 사용하여 다중 필라멘트 출력" msgid "Manual Filament Change" msgstr "수동 필라멘트 교체" msgid "Enable this option to omit the custom Change filament G-code only at the beginning of the print. The tool change command (e.g., T0) will be skipped throughout the entire print. This is useful for manual multi-material printing, where we use M600/PAUSE to trigger the manual filament change action." msgstr "출력 시작 시에만 사용자 정의 필라멘트 변경 Gcode를 생략하려면 이 옵션을 활성화합니다. 툴 변경 명령(예: T0)은 전체 출력 과정에서 건너뜁니다. 이는 M600/PAUSE를 사용하여 수동 필라멘트 교체 작업을 실행하는 수동 다중 재료 출력에 유용합니다." msgid "Wipe tower type" msgstr "와이프 타워 유형" # AI Translated msgid "Choose the wipe tower implementation for multi-material prints. Type 1 is recommended for Bambu and Qidi printers with a filament cutter. Type 2 offers better compatibility with multi-tool and MMU printers and provide overall better compatibility." msgstr "다중 재료 출력에 사용할 프라임 타워 구현 방식을 선택합니다. 유형 1은 필라멘트 커터가 있는 Bambu 및 Qidi 프린터에 권장됩니다. 유형 2는 멀티 툴 및 MMU 프린터와의 호환성이 더 좋고 전반적인 호환성도 우수합니다." msgid "Type 1" msgstr "유형 1" msgid "Type 2" msgstr "유형 2" msgid "Purge in prime tower" msgstr "프라임 타워에서 청소" msgid "Purge remaining filament into prime tower." msgstr "남은 필라멘트를 프라임 타워에서 제거" msgid "Enable filament ramming" msgstr "필라멘트 채워넣기 활성화" # AI Translated msgid "Tool change on wipe tower" msgstr "프라임 타워에서 툴 체인지" # AI Translated msgid "Force the toolhead to travel to the wipe tower before issuing the tool change command (Tx). Only relevant for multi-extruder (multi-toolhead) printers using a Type 2 wipe tower. By default Orca skips the travel on multi-toolhead machines because the firmware handles the head swap, which can result in the Tx command being issued above the printed part. Enable this option if you want the tool change to always be issued above the wipe tower instead." msgstr "툴 체인지 명령(Tx)을 실행하기 전에 툴헤드가 반드시 프라임 타워로 이동하도록 합니다. 유형 2 프라임 타워를 사용하는 다중 압출기(멀티 툴헤드) 프린터에만 해당됩니다. 기본적으로 Orca는 멀티 툴헤드 장비에서 펌웨어가 헤드 교체를 처리하므로 이동을 생략하는데, 이 때문에 Tx 명령이 출력물 위에서 실행될 수 있습니다. 툴 체인지가 항상 프라임 타워 위에서 실행되도록 하려면 이 옵션을 활성화하십시오." msgid "No sparse layers (beta)" msgstr "희소 레이어 없음(베타)" msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." msgstr "활성화되면 툴 체인지 없이 레이어에 프라임 타워가 출력되지 않습니다. 툴 체인지가 있는 레이어에서는 압출기가 아래쪽으로 이동하여 프라임 타워를 출력합니다. 출력물과의 충돌이 없는지 확인하는 것은 사용자의 책임입니다." msgid "Prime all printing extruders" msgstr "모든 활성화된 압출기 프라이밍" msgid "If enabled, all printing extruders will be primed at the front edge of the print bed at the start of the print." msgstr "활성화되면 모든 활성화된 압출기는 출력 시작 시 출력 베드의 앞쪽 가장자리에서 프라이밍합니다." # AI Translated msgid "Toolchange ordering" msgstr "툴 체인지 순서" # AI Translated msgid "" "Determines the order of tool changes on each layer.\n" "- Default: Starts with the last used extruder to minimize tool changes.\n" "- Cyclic: Uses a fixed tool sequence each layer. This sacrifices speed for better surface quality, as the extra toolchanges allow layers more time to cool." msgstr "" "각 레이어에서 툴 체인지가 이루어지는 순서를 결정합니다.\n" "- 기본값: 툴 체인지를 최소화하기 위해 마지막으로 사용한 압출기부터 시작합니다.\n" "- 순환: 레이어마다 고정된 툴 순서를 사용합니다. 툴 체인지가 늘어나 레이어를 식힐 시간이 늘어나므로, 속도를 희생하는 대신 표면 품질이 좋아집니다." # AI Translated msgid "Cyclic" msgstr "순환" msgid "Slice gap closing radius" msgstr "슬라이스 간격 폐쇄 반경" msgid "Cracks smaller than 2x gap closing radius are being filled during the triangle mesh slicing. The gap closing operation may reduce the final print resolution, therefore it is advisable to keep the value reasonably low." msgstr "간격 폐쇄 반경의 2배보다 작은 균열은 삼각형 메시 슬라이싱 중에 채워집니다. 간격 채우기 작업은 최종 출력 해상도를 감소시킬 수 있으므로 값을 합리적으로 낮게 유지하는 것이 좋습니다." msgid "Slicing Mode" msgstr "슬라이싱 모드" msgid "Other" msgstr "기타" msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model." msgstr "3DLabPrint 비행기 모델에는 \"짝수-홀수\"를 사용하세요. \"구멍 닫기\"를 사용하여 모델의 모든 구멍을 닫습니다." msgid "Regular" msgstr "일반" msgid "Even-odd" msgstr "짝수-홀수" msgid "Close holes" msgstr "구멍 닫기" msgid "Z offset" msgstr "Z 옵셋" msgid "This value will be added (or subtracted) from all the Z coordinates in the output G-code. It is used to compensate for bad Z endstop position: for example, if your endstop zero actually leaves the nozzle 0.3mm far from the print bed, set this to -0.3 (or fix your endstop)." msgstr "이 값은 출력 Gcode의 모든 Z 좌표에 더해지거나 뺍니다. 이는 잘못된 Z 엔드스톱 위치를 보정하는 데 사용됩니다. 예를 들어 엔드스톱 제로가 실제로 출력 베드에서 노즐을 0.3mm 멀리 벗어나는 경우 이 값을 -0.3으로 설정합니다 (또는 엔드스톱을 직접 수정하세요)." msgid "Enable support" msgstr "서포트 사용" msgid "This enables support generation." msgstr "서포트 생성을 활성화 합니다." msgid "Normal (auto) and Tree (auto) are used to generate support automatically. If Normal (manual) or Tree (manual) is selected, only support enforcers are generated." msgstr "일반(자동) 및 트리(자동)는 서포트를 자동으로 생성하는 데 사용됩니다. 일반(수동) 또는 트리(수동)를 선택하면 서포트 시행자만 생성됩니다." msgid "Normal (auto)" msgstr "일반(자동)" msgid "Tree (auto)" msgstr "트리(자동)" msgid "Normal (manual)" msgstr "일반(수동)" msgid "Tree (manual)" msgstr "트리(수동)" msgid "Support/object XY distance" msgstr "서포트/객체 XY 거리" msgid "This controls the XY separation between an object and its support." msgstr "객체와 서포트를 분리하는 XY 간격" msgid "Support/object first layer gap" msgstr "서포트/객체 첫 번째 레이어 간격" msgid "XY separation between an object and its support at the first layer." msgstr "첫 번째 레이어에서 객체와 서포트 사이의 XY 분리." msgid "Pattern angle" msgstr "패턴 각도" msgid "Use this setting to rotate the support pattern on the horizontal plane." msgstr "이 설정을 사용하여 수평면에서 서포트 패턴을 회전합니다." msgid "On build plate only" msgstr "빌드 플레이트에만 생성" msgid "This setting only generates supports that begin on the build plate." msgstr "모델 표면에 서포트를 생성하지 않고 빌드 플레이트에만 생성합니다" msgid "Support critical regions only" msgstr "위험한 지역에만 생성" msgid "Only create support for critical regions including sharp tail, cantilever, etc." msgstr "날카로운 꼬리, 외팔보(항공기 날개처럼 튀어나온 구조 by MMT) 등과 같이 위험한 부위에 대해서만 서포트를 생성합니다." # AI Translated msgid "Ignore small overhangs" msgstr "작은 오버행 무시" # AI Translated msgid "Ignore small overhangs that possibly don't require support." msgstr "서포트가 필요하지 않을 수 있는 작은 오버행을 무시합니다." msgid "Top Z distance" msgstr "상단 Z 거리" msgid "Z gap between the support's top and object." msgstr "서포트 상단과 객체 사이의 Z 간격." msgid "Bottom Z distance" msgstr "하단 Z 거리" msgid "Z gap between the object and the support bottom. If Support Top Z Distance is 0 and the bottom has interface layers, this value is ignored and the support is printed in direct contact with the object (no gap)." msgstr "객체와 서포트 하단 사이의 Z 간격. 서포트 상단 Z 거리가 0이고 하단에 인터페이스 레이어가 있으면 이 값은 무시되고 서포트가 객체에 직접 접촉하여 출력됩니다(간격 없음)." msgid "Support/raft base" msgstr "서포트/라프트 기본" # AI Translated msgid "" "Filament to print support base and raft.\n" "\"Default\" means no specific filament for support and current filament is used." msgstr "" "서포트 베이스 및 라프트를 출력하기 위한 필라멘트.\n" "\"기본값\"은 서포트 전용 필라멘트가 없으며 현재 필라멘트가 사용됨을 의미합니다." msgid "Avoid interface filament for base" msgstr "베이스용 인터페이스 필라멘트 줄이기" msgid "Avoid using support interface filament to print support base if possible." msgstr "서포트 베이스를 프린트하기 위해 서포트 인터페이스 필라멘트를 사용하지 마세요." msgid "Line width of support. If expressed as a %, it will be computed over the nozzle diameter." msgstr "서포트의 선 너비. %로 입력 시 노즐 직경에 대한 비율로 계산됩니다." msgid "Loop pattern interface" msgstr "접점에서 루프 패턴 사용" msgid "This covers the top contact layer of the supports with loops. It is disabled by default." msgstr "서포트 상단 접촉 레이어를 루프로 덮습니다. 기본적으로 비활성화되어 있습니다." msgid "Support/raft interface" msgstr "서포트/라프트 접점" # AI Translated msgid "" "Filament to print support interface.\n" "\"Default\" means no specific filament for support interface and current filament is used." msgstr "" "서포트 인터페이스를 출력하기 위한 필라멘트.\n" "\"기본값\"은 서포트 인터페이스 전용 필라멘트가 없으며 현재 필라멘트가 사용됨을 의미합니다." msgid "Top interface layers" msgstr "상단 접점 레이어" # AI Translated msgid "This is the number of top interface layers." msgstr "상단 인터페이스 레이어의 수입니다." msgid "Bottom interface layers" msgstr "하단 접점 레이어" msgid "Number of bottom interface layers." msgstr "하단 인터페이스 레이어 수" msgid "Same as top" msgstr "위와 동일" msgid "Top interface spacing" msgstr "상단 접점 선 간격" # AI Translated msgid "" "Spacing of interface lines. Zero means solid interface.\n" "Force using solid interface when support ironing is enabled." msgstr "" "접점 선의 간격입니다. 0이면 꽉찬 접점을 의미합니다.\n" "서포트 다림질이 활성화되면 꽉찬 접점을 강제로 사용합니다." msgid "Bottom interface spacing" msgstr "하단 접점 선 간격" msgid "This is the spacing of bottom interface lines. 0 means solid interface." msgstr "하단 접점 선의 간격. 0은 꽉찬 접점을 의미합니다" msgid "This is the speed for support interfaces." msgstr "서포트 접점 속도" msgid "Base pattern" msgstr "기본 패턴" # AI Translated msgid "" "Line pattern of support.\n" "\n" "The Default option for Tree supports is Hollow, which means no base pattern. For other support types, the Default option is the Rectilinear pattern.\n" "\n" "NOTE: For Organic supports, the two walls are supported only with the Hollow/Default base pattern. The Lightning base pattern is supported only by Tree Slim/Strong/Hybrid supports. For the other support types, the Rectilinear will be used instead of Lightning." msgstr "" "서포트의 선 패턴입니다.\n" "\n" "트리 서포트의 기본값은 속 빈이며, 이는 베이스 패턴을 사용하지 않음을 의미합니다. 다른 서포트 유형의 기본값은 직선 패턴입니다.\n" "\n" "참고: 유기적 서포트에서는 속 빈/기본 베이스 패턴에서만 벽 2개가 지원됩니다. 번개 베이스 패턴은 트리 슬림/강함/하이브리드 서포트에서만 지원됩니다. 다른 서포트 유형에서는 번개 대신 직선 패턴이 사용됩니다." msgid "Rectilinear grid" msgstr "직선 격자" msgid "Hollow" msgstr "공동" msgid "Interface pattern" msgstr "접점 패턴" msgid "This is the line pattern for support interfaces. The default pattern for non-soluble support interfaces is Rectilinear while the default pattern for soluble support interfaces is Concentric." msgstr "서포트 접점의 선 패턴. 비가용성 서포트 접점의 기본 패턴은 직선인 반면 가용성 서포트 접점의 기본 패턴은 동심입니다" msgid "Rectilinear Interlaced" msgstr "엇갈린 직선" msgid "Base pattern spacing" msgstr "기본 패턴 간격" msgid "This determines the spacing between support lines." msgstr "서포트 선 사이의 간격" msgid "Normal support expansion" msgstr "일반 서포트 확장" msgid "Expand (+) or shrink (-) the horizontal span of normal support." msgstr "일반 서포트의 수평 범위를 확대(+) 또는 축소(-)합니다" msgid "This is the speed for support." msgstr "서포트 속도" msgid "" "Style and shape of the support. For normal support, projecting the supports into a regular grid will create more stable supports (default), while snug support towers will save material and reduce object scarring.\n" "For tree support, slim and organic style will merge branches more aggressively and save a lot of material (default organic), while hybrid style will create similar structure to normal support under large flat overhangs." msgstr "" "서포트의 스타일과 모양. 일반 서포트의 경우, 격자는 보다 안정적인 서포트(기본값)가 생성되는 반면, 맞춤 서포트는 재료를 절약하고 서포트 자국을 줄입니다.\n" "트리 서포트의 경우, 얇은 및 유기체 모양은 가지를 보다 적극적으로 병합하고 많은 재료를 절약합니다(기본값 유기체). 반면 혼합 모양은 크고 평평한 오버행 아래에 일반 서포트와 유사한 구조를 만듭니다." msgid "Default (Grid/Organic)" msgstr "기본값(그리드/오가닉)" msgid "Snug" msgstr "맞춤" msgid "Organic" msgstr "유기체" msgid "Tree Slim" msgstr "얇은 트리" msgid "Tree Strong" msgstr "강한 트리" msgid "Tree Hybrid" msgstr "혼합 트리" msgid "Independent support layer height" msgstr "독립적 서포트 레이어 높이" msgid "Support layer uses layer height independent with object layer. This is to support customizing Z-gap and save print time. This option will be invalid when the prime tower is enabled." msgstr "서포트 레이어는 객체 레이어와 독립적인 레이어 높이를 사용합니다. 이것은 Z 거리 사용자 정의를 지원하고 출력 시간을 절약하기 위한 것입니다. 프라임 타워가 활성화되면 이 옵션은 유효하지 않습니다." msgid "Threshold angle" msgstr "임계값 각도" msgid "" "Support will be generated for overhangs whose slope angle is below the threshold. The smaller this value is, the steeper the overhang that can be printed without support.\n" "Note: If set to 0, normal supports use the Threshold overlap instead, while tree supports fall back to a default value of 30." msgstr "" "기울기 각도가 임계값보다 작은 오버행에 대해 서포트가 생성됩니다.이 값이 작을수록 서포트 없이 출력할 수 있는 오버행이 더 가파릅니다.\n" "참고: 0으로 설정하면 일반 서포트는 대신 임계값 중복을 사용하고, 트리 서포트는 기본값 30으로 돌아갑니다." msgid "Threshold overlap" msgstr "임계값 중복" msgid "If threshold angle is zero, support will be generated for overhangs whose overlap is below the threshold. The smaller this value is, the steeper the overhang that can be printed without support." msgstr "임계각이 0이면 오버행이 임계값 미만인 오버행에 대한 서포트가 생성됩니다. 이 값이 작을수록 서포트 없이 출력할 수 있는 오버행이 가파르게 됩니다." msgid "Tree support branch angle" msgstr "트리 서포트 가지 각도" msgid "This setting determines the maximum overhang angle that the branches of tree support are allowed to make. If the angle is increased, the branches can be printed more horizontally, allowing them to reach farther." msgstr "이 설정은 트리 서포트의 가지가 만들 수 있는 오버행의 최대 각도를 결정합니다. 각도가 증가하면 가지가 멀리까지 닿을 수 있도록 더 수평으로 출력될 수 있습니다." msgid "Preferred Branch Angle" msgstr "선호하는 가지 각도" #. TRN PrintSettings: "Organic supports" > "Preferred Branch Angle" msgid "The preferred angle of the branches, when they do not have to avoid the model. Use a lower angle to make them more vertical and more stable. Use a higher angle for branches to merge faster." msgstr "모델을 피할 필요가 없을 때 가지의 선호 각도입니다. 더 수직적이고 안정적으로 만들려면 더 낮은 각도를 사용하세요. 가지를 더 빠르게 병합하려면 더 높은 각도를 사용하세요." msgid "Tree support branch distance" msgstr "트리 서포트 가지 거리" msgid "This setting determines the distance between neighboring tree support nodes." msgstr "이 설정은 인접한 트리 서포트 지점 간의 거리를 결정합니다." msgid "Branch Density" msgstr "가지 밀도" #. TRN PrintSettings: "Organic supports" > "Branch Density" msgid "Adjusts the density of the support structure used to generate the tips of the branches. A higher value results in better overhangs but the supports are harder to remove, thus it is recommended to enable top support interfaces instead of a high branch density value if dense interfaces are needed." msgstr "가지 끝을 생성하는 데 사용되는 서포트의 밀도를 조정합니다. 값이 높을수록 오버행가 더 좋아지지만 서포트를 제거하기가 더 어렵습니다. 따라서 조밀한 인터페이스가 필요한 경우 높은 가지 밀도 값 대신 상단 지지 인터페이스를 활성화하는 것이 좋습니다." msgid "Auto brim width" msgstr "트리 서포트 자동 브림 너비" msgid "Enabling this option means the width of the brim for tree support will be automatically calculated." msgstr "옵션을 활성화하면 트리 서포트의 브림 너비가 자동으로 계산됩니다" msgid "Tree support brim width" msgstr "트리 서포트 브림 너비" msgid "Distance from tree branch to the outermost brim line." msgstr "트리 서포트 가지에서 가장 바깥쪽 브림까지의 거리" msgid "Tip Diameter" msgstr "노즐 직경" #. TRN PrintSettings: "Organic supports" > "Tip Diameter" msgid "Branch tip diameter for organic supports." msgstr "유기 지지체의 가지 끝 직경." msgid "Tree support branch diameter" msgstr "트리 서포트 가지 직경" msgid "This setting determines the initial diameter of support nodes." msgstr "이 설정은 지지 노드의 초기 직경을 결정합니다." #. TRN PrintSettings: #lmFIXME msgid "Branch Diameter Angle" msgstr "가지 직경 각도" #. TRN PrintSettings: "Organic supports" > "Branch Diameter Angle" msgid "The angle of the branches' diameter as they gradually become thicker towards the bottom. An angle of 0 will cause the branches to have uniform thickness over their length. A bit of an angle can increase stability of the organic support." msgstr "아래로 갈수록 가지의 직경이 점차 굵어지는 각도. 각도가 0이면 가지가 균일한 두께를 가지는 가지가 됩니다. 약간의 각도는 유기체 서포트의 안정성을 증가시킬 수 있습니다." msgid "Support wall loops" msgstr "서포트 벽 루프" msgid "This setting specifies the count of support walls in the range of [0,2]. 0 means auto." msgstr "이 설정은 [0,2] 범위에서 지지벽의 개수를 지정합니다. 0은 자동을 의미합니다." msgid "Tree support with infill" msgstr "채우기가 있는 트리 서포트" msgid "This setting specifies whether to add infill inside large hollows of tree support." msgstr "이 설정은 트리 서포트의 큰 공동 내부에 채우기를 추가할지 여부를 지정합니다" # AI Translated msgid "Ironing Support Interface" msgstr "서포트 접점 다림질" # AI Translated msgid "Ironing is using small flow to print on same height of support interface again to make it more smooth. This setting controls whether support interface being ironed. When enabled, support interface will be extruded as solid too." msgstr "다림질은 적은 압출량으로 서포트 접점과 같은 높이를 다시 출력하여 표면을 더 매끄럽게 만드는 기능입니다. 이 설정은 서포트 접점을 다림질할지 여부를 제어합니다. 활성화하면 서포트 접점도 꽉 차게 압출됩니다." # AI Translated msgid "Support Ironing Pattern" msgstr "서포트 다림질 패턴" # AI Translated msgid "Support Ironing flow" msgstr "서포트 다림질 압출량" # AI Translated msgid "The amount of material to extrude during ironing. Relative to flow of normal support interface layer height. Too high value results in overextrusion on the surface." msgstr "다림질 중에 압출할 재료의 양입니다. 일반 서포트 접점 레이어 높이의 압출량을 기준으로 합니다. 값이 너무 크면 표면에 과압출이 발생합니다." # AI Translated msgid "Support Ironing line spacing" msgstr "서포트 다림질 선 간격" msgid "Activate temperature control" msgstr "온도 제어 활성화" msgid "" "Enable this option for automated chamber temperature control. This option activates the emitting of an M191 command before the \"machine_start_gcode\"\n" " which sets the chamber temperature and waits until it is reached. In addition, it emits an M141 command at the end of the print to turn off the chamber heater, if present.\n" "\n" "This option relies on the firmware supporting the M191 and M141 commands either via macros or natively and is usually used when an active chamber heater is installed." msgstr "" "자동화된 챔버 온도 제어를 위해 이 옵션을 활성화합니다. 이 옵션은 \"machine_start_gcode\" 이전에 M191 명령 내보내기를 활성화합니다.\n" " 챔버 온도를 설정하고 온도에 도달할 때까지 기다립니다. 또한 출력가 끝나면 챔버 히터를 끄는 M141 명령을 내보냅니다(있는 경우).\n" "\n" "이 옵션은 매크로를 통해 또는 기본적으로 M191 및 M141 명령을 지원하는 펌웨어에 의존하며 일반적으로 활성 챔버 히터가 설치된 경우 사용됩니다." msgid "" "For high-temperature materials like ABS, ASA, PC, and PA, a higher chamber temperature can help suppress or reduce warping and potentially lead to higher interlayer bonding strength. However, at the same time, a higher chamber temperature will reduce the efficiency of air filtration for ABS and ASA.\n" "\n" "For PLA, PETG, TPU, PVA, and other low-temperature materials, this option should be disabled (set to 0) as the chamber temperature should be low to avoid extruder clogging caused by material softening at the heat break.\n" "\n" "If enabled, this parameter also sets a G-code variable named chamber_temperature, which can be used to pass the desired chamber temperature to your print start macro, or a heat soak macro like this: PRINT_START (other variables) CHAMBER_TEMP=[chamber_temperature]. This may be useful if your printer does not support M141/M191 commands, or if you desire to handle heat soaking in the print start macro if no active chamber heater is installed." msgstr "" "ABS, ASA, PC 및 PA와 같은 고온 재료의 경우 챔버 온도가 높을수록 뒤틀림을 억제하거나 줄이는 데 도움이 될 수 있으며 잠재적으로 층간 결합 강도가 높아질 수 있습니다. 그러나 동시에 챔버 온도가 높을수록 ABS 및 ASA의 공기 여과 효율성이 감소합니다.\n" "\n" "PLA, PETG, TPU, PVA 및 기타 저온 재료의 경우 열 차단 시 재료 연화로 인한 압출기 막힘을 방지하기 위해 챔버 온도가 낮아야 하므로 이 옵션을 비활성화(0으로 설정)해야 합니다.\n" "\n" "활성화된 경우 이 매개변수는 원하는 챔버 온도를 출력 시작 매크로 또는 PRINT_START(기타 변수) CHAMBER_TEMP=[chamber_temp]와 같은 열 흡수 매크로에 전달하는 데 사용할 수 있는 Chamber_temp라는 Gcode 변수도 설정합니다. 이는 프린터가 M141/M191 명령을 지원하지 않거나 활성 챔버 히터가 설치되지 않은 경우 출력 시작 매크로에서 열 흡수를 처리하려는 경우 유용할 수 있습니다." # AI Translated msgid "" "This is the chamber temperature at which printing should start, while the chamber continues heating toward the \"Target\" chamber temperature. For example, set the Target to 60 and the Minimal to 50 to begin printing once the chamber reaches 50℃, without waiting for the full 60℃.\n" "\n" "It sets a G-code variable named chamber_minimal_temperature, which can be passed to your print start macro or a heat soak macro, like this: PRINT_START (other variables) CHAMBER_MIN_TEMP=[chamber_minimal_temperature].\n" "\n" "Unlike the \"Target\" chamber temperature, this option does not emit any M141/M191 commands; it only exposes the value to your custom G-code. It should not exceed the \"Target\" chamber temperature." msgstr "" "챔버가 \"목표\" 챔버 온도까지 계속 가열되는 동안 출력을 시작할 챔버 온도입니다. 예를 들어 목표를 60으로, 최소를 50으로 설정하면 60℃가 될 때까지 기다리지 않고 챔버가 50℃에 도달하는 즉시 출력을 시작합니다.\n" "\n" "이 옵션은 chamber_minimal_temperature라는 G-code 변수를 설정하며, 이 변수는 다음과 같이 출력 시작 매크로나 히트 소크 매크로에 전달할 수 있습니다: PRINT_START (기타 변수) CHAMBER_MIN_TEMP=[chamber_minimal_temperature].\n" "\n" "\"목표\" 챔버 온도와 달리 이 옵션은 M141/M191 명령을 생성하지 않고 값을 사용자 정의 G-code에 노출하기만 합니다. 이 값은 \"목표\" 챔버 온도를 초과해서는 안 됩니다." # AI Translated msgid "Chamber minimal temperature" msgstr "최소 챔버 온도" msgid "Nozzle temperature after the first layer" msgstr "초기 레이어 이후의 노즐 온도" msgid "Detect thin walls" msgstr "얇은 벽 감지" msgid "This detects thin walls which can’t contain two lines and uses a single line to print. It may not print as well because it’s not a closed loop." msgstr "두개의 선 너비를 포함할 수 없는 얇은 벽을 감지합니다. 그리고 한 선으로 출력합니다. 폐쇄 루프가 아니기 때문에 출력이 잘 되지 않을 수 있습니다" msgid "This G-code is inserted when filament is changed, including T commands to trigger tool change." msgstr "이 Gcode는 툴 체인지을 유발하는 T 명령을 포함하여 필라멘트를 변경할 때 삽입됩니다" msgid "This G-code is inserted when the extrusion role is changed." msgstr "이 Gcode는 압출 역할이 변경될 때 삽입됩니다" # AI Translated msgid "Change extrusion role G-code (filament)" msgstr "압출 역할 변경 G-code(필라멘트)" # AI Translated msgid "This G-code is inserted when the extrusion role is changed for the active filament." msgstr "활성 필라멘트의 압출 역할이 변경될 때 이 G-code가 삽입됩니다." msgid "Line width for top surfaces. If expressed as a %, it will be computed over the nozzle diameter." msgstr "상단 표면의 선 너비. %로 입력 시 노즐 직경에 대한 비율로 계산됩니다." msgid "This is the speed for solid top surface infill." msgstr "꽉찬 상단 표면 채우기 속도" msgid "Top shell layers" msgstr "상단 쉘 레이어" msgid "This is the number of solid layers of top shell, including the top surface layer. When the thickness calculated by this value is thinner than the top shell thickness, the top shell layers will be increased" msgstr "상단 표면을 포함한 상단 쉘의 꽉찬 레이어 수입니다. 이 값으로 계산한 두께가 상단 쉘 두께보다 얇으면 상단 쉘 레이어가 증가합니다" msgid "Top shell thickness" msgstr "상단 쉘 두께" msgid "The number of top solid layers is increased when slicing if the thickness calculated by top shell layers is thinner than this value. This can avoid having too thin a shell when layer height is small. 0 means that this setting is disabled and thickness of top shell is determined simply by the number of top shell layers." msgstr "상단 쉘 레이어로 계산된 두께가 이 값보다 얇은 경우 슬라이싱할 때 상단 꽉찬 레이어의 수가 증가합니다. 이렇게 하면 레이어 높이가 작을 때 쉘이 너무 얇아지는 것을 방지할 수 있습니다. 0은 이 설정이 비활성화되고 상단 쉘의 두께가 절대적으로 상단 쉘 레이어에 의해 결정됨을 의미합니다" # AI Translated msgid "Separated infills" msgstr "분리된 채우기" # AI Translated msgid "" "Centers the internal infill of each part on itself, as if it were sliced on its own, instead of on the whole assembly. Parts that touch or overlap are treated as one body and share a center; separate parts (or distinct 3D objects) each get their own.\n" "Useful when an assembly groups several objects that should each keep a consistent, self-centered infill.\n" "Affects line and grid patterns and rotation-template infills.\n" "Patterns locked to global coordinates (Gyroid, Honeycomb, TPMS, ...) are unaffected." msgstr "" "전체 어셈블리가 아니라 각 부품을 개별적으로 슬라이스한 것처럼 부품마다 내부 채우기를 자체 중심에 맞춥니다. 서로 닿거나 겹치는 부품은 하나의 몸체로 간주되어 중심을 공유하며, 분리된 부품(또는 별개의 3D 객체)은 각각 자체 중심을 갖습니다.\n" "여러 객체를 묶은 어셈블리에서 각 객체가 자체 중심을 기준으로 일관된 채우기를 유지해야 할 때 유용합니다.\n" "선 및 격자 패턴과 회전 템플릿 채우기에 영향을 줍니다.\n" "전역 좌표에 고정된 패턴(자이로이드, 벌집, TPMS 등)은 영향을 받지 않습니다." # AI Translated msgid "Center surface pattern on" msgstr "표면 패턴 중심 기준" # AI Translated msgid "" "Chooses where the centering point of centered top/bottom surface patterns (Archimedean Chords, Octagram Spiral) is placed.\n" " - Each Surface: centers the pattern on every individual surface region, so each island is symmetric on its own.\n" " - Each Model: centers the pattern on each connected body. Parts that touch or overlap share one center; parts detached from the rest each get their own.\n" " - Each Assembly: uses a single shared center for the whole object or assembly." msgstr "" "중심 기반 상단/하단 표면 패턴(아르키메데스 현, 팔각별 나선)의 중심점을 어디에 둘지 선택합니다.\n" " - 표면별: 각각의 개별 표면 영역에 패턴의 중심을 두어 각 섬이 자체적으로 대칭이 되도록 합니다.\n" " - 모델별: 연결된 각 몸체에 패턴의 중심을 둡니다. 서로 닿거나 겹치는 부품은 하나의 중심을 공유하고, 나머지와 분리된 부품은 각각 자체 중심을 갖습니다.\n" " - 어셈블리별: 객체 또는 어셈블리 전체에 대해 하나의 공유 중심을 사용합니다." # AI Translated msgid "Each Surface" msgstr "표면별" # AI Translated msgid "Each Model" msgstr "모델별" # AI Translated msgid "Each Assembly" msgstr "어셈블리별" msgid "This is the speed at which traveling is done." msgstr "압출이 없을 때의 이동 속도" msgid "Wipe while retracting" msgstr "후퇴 시 노즐 청소" msgid "This moves the nozzle along the last extrusion path when retracting to clean any leaked material on the nozzle. This can minimize blobs when printing a new part after traveling." msgstr "노즐에서 흘러내린된 재료를 청소하기 위해 후퇴할 때 마지막 압출 경로를 따라 노즐을 이동합니다. 이동 후 출력을 시작할 때 방울을 최소화할 수 있습니다." msgid "Wipe distance" msgstr "노즐 청소 거리" msgid "" "Describe how long the nozzle will move along the last path when retracting.\n" "\n" "Depending on how long the wipe operation lasts, how fast and long the extruder/filament retraction settings are, a retraction move may be needed to retract the remaining filament.\n" "\n" "Setting a value in the retract amount before wipe setting below will perform any excess retraction before the wipe, else it will be performed after." msgstr "" "후퇴할 때 노즐이 마지막 경로를 따라 얼마나 오래 움직일지 설명합니다.\n" "\n" "와이프 작업의 지속 시간, 압출기/필라멘트 후퇴 설정의 속도와 길이에 따라 남은 필라멘트를 후퇴시키기 위해 후퇴 동작이 필요할 수 있습니다.\n" "\n" "아래의 와이프 전 후퇴량 설정에서 값을 설정하면 와이프 전에 초과 후퇴가 수행되고, 그렇지 않으면 와이프 후에 수행됩니다." msgid "The wiping tower can be used to clean up residue on the nozzle and stabilize the chamber pressure inside the nozzle in order to avoid appearance defects when printing objects." msgstr "프라임 타워는 객체를 출력할 때 외관 결함을 방지하기 위해 노즐의 잔류물을 청소하고 노즐 내부의 압력을 안정화하는 데 사용할 수 있습니다." msgid "Internal ribs" msgstr "내부 갈비" msgid "Enable internal ribs to increase the stability of the prime tower." msgstr "프라임 타워의 안정성을 높이기 위해 내부 리브를 활성화합니다." msgid "Purging volumes" msgstr "버리기 볼륨" msgid "Flush multiplier" msgstr "버리기 승수" msgid "The actual flushing volumes is equal to the flush multiplier value multiplied by the flushing volumes in the table." msgstr "실제 버리기 볼륨은 버리기 승수에 테이블의 버리기 볼륨을 곱한 것과 같습니다." # AI Translated msgid "Flush multiplier (Fast mode)" msgstr "플러시 배수(고속 모드)" # AI Translated msgid "The flush multiplier used in fast purge mode." msgstr "고속 퍼지 모드에서 사용하는 플러시 배수입니다." msgid "Prime volume" msgstr "프라임양" msgid "This is the volume of material to prime the extruder with on the tower." msgstr "탑에서 압출을 실행할 재료의 부피." # AI Translated msgid "Prime volume mode" msgstr "프라임 용량 모드" # AI Translated msgid "Selects how the wipe-tower prime and flush volumes are computed on multi-extruder printers." msgstr "다중 압출기 프린터에서 프라임 타워의 프라임 및 플러시 용량을 계산하는 방식을 선택합니다." # AI Translated msgid "Saving" msgstr "절약" # AI Translated msgid "Fast" msgstr "고속" msgid "This is the width of prime towers." msgstr "프라임 타워의 너비" msgid "Wipe tower rotation angle" msgstr "프라임 타워 회전 각도" msgid "Wipe tower rotation angle with respect to X axis." msgstr "X축 기준의 프라임 타워 회전 각도." msgid "Brim width of prime tower, negative number means auto calculated width based on the height of prime tower." msgstr "프라임 타워의 테두리 너비, 음수는 프라임 타워 높이에 따라 자동으로 계산된 너비를 의미합니다." msgid "Stabilization cone apex angle" msgstr "안정화 원뿔 정점 각도" msgid "Angle at the apex of the cone that is used to stabilize the wipe tower. Larger angle means wider base." msgstr "프라임 타워를 안정화하는 데 사용되는 원뿔 꼭대기의 각도입니다. 각도가 클수록 베이스가 넓어집니다." msgid "Maximum wipe tower print speed" msgstr "프라임 타워 최대 속도" msgid "" "The maximum print speed when purging in the wipe tower and printing the wipe tower sparse layers. When purging, if the sparse infill speed or calculated speed from the filament max volumetric speed is lower, the lowest will be used instead.\n" "\n" "When printing the sparse layers, if the internal perimeter speed or calculated speed from the filament max volumetric speed is lower, the lowest will be used instead.\n" "\n" "Increasing this speed may affect the tower's stability as well as increase the force with which the nozzle collides with any blobs that may have formed on the wipe tower.\n" "\n" "Before increasing this parameter beyond the default of 90 mm/s, make sure your printer can reliably bridge at the increased speeds and that ooze when tool changing is well controlled.\n" "\n" "For the wipe tower external perimeters the internal perimeter speed is used regardless of this setting." msgstr "" "와이프 타워에서 버리기하고 와이프 타워 희박 레이어를 출력할 때 최대 출력 속도입니다. 버리기 시 희소 충전 속도 또는 필라멘트 최대 압출 속도에서 계산된 속도가 더 낮은 경우 가장 낮은 속도가 대신 사용됩니다.\n" "\n" "희소 레이어를 출력할 때 내부 주변 속도 또는 필라멘트 최대 압출 속도에서 계산된 속도가 더 낮은 경우 가장 낮은 속도가 대신 사용됩니다.\n" "\n" "이 속도를 높이면 타워의 안정성에 영향을 줄 수 있을 뿐만 아니라 노즐이 와이프 타워에 형성될 수 있는 얼룩과 충돌하는 힘도 증가할 수 있습니다.\n" "\n" "이 매개변수를 기본값인 90mm/초 이상으로 늘리기 전에 프린터가 증가된 속도에서 안정적으로 브릿지할 수 있고 도구 교환 시 흘러나오는 현상이 잘 제어되는지 확인하십시오.\n" "\n" "와이프 타워 외부 경계의 경우 이 설정에 관계없이 내부 경계 속도가 사용됩니다." # AI Translated msgid "Wall type" msgstr "벽 유형" # AI Translated msgid "" "Wipe tower outer wall type.\n" "1. Rectangle: The default wall type, a rectangle with fixed width and height.\n" "2. Cone: A cone with a fillet at the bottom to help stabilize the wipe tower.\n" "3. Rib: Adds four ribs to the tower wall for enhanced stability." msgstr "" "프라임 타워의 외벽 유형입니다.\n" "1. 직사각형: 기본 벽 유형으로, 너비와 높이가 고정된 직사각형입니다.\n" "2. 원뿔: 프라임 타워를 안정화하기 위해 바닥에 필렛이 있는 원뿔입니다.\n" "3. 리브: 안정성을 높이기 위해 타워 벽에 리브 4개를 추가합니다." msgid "Rectangle" msgstr "직사각형" # AI Translated msgid "Rib" msgstr "리브" msgid "Extra rib length" msgstr "추가 리브 길이" # AI Translated msgid "Positive values can increase the size of the rib wall, while negative values can reduce the size. However, the size of the rib wall can not be smaller than that determined by the cleaning volume." msgstr "양수 값은 리브 벽의 크기를 키우고 음수 값은 크기를 줄입니다. 다만 리브 벽의 크기는 청소 용량으로 결정되는 크기보다 작아질 수 없습니다." msgid "Rib width" msgstr "리브 너비" msgid "Rib width is always less than half the prime tower side length." msgstr "리브 너비는 항상 프라임 타워 변 길이의 절반 미만입니다." msgid "Fillet wall" msgstr "필렛 벽" # AI Translated msgid "The wall of prime tower will fillet." msgstr "프라임 타워의 벽에 필렛을 적용합니다." msgid "The extruder to use when printing perimeter of the wipe tower. Set to 0 to use the one that is available (non-soluble would be preferred)." msgstr "프라임 타워의 둘레를 출력할 때 사용하는 압출기입니다. 사용 가능한 압출기를 사용하려면 0으로 설정하세요 (비가용성 재료가 적절합니다)." msgid "Purging volumes - load/unload volumes" msgstr "버리기량 - 로드/언로드량" msgid "This vector saves required volumes to change from/to each tool used on the wipe tower. These values are used to simplify creation of the full purging volumes below." msgstr "이 벡터는 프라임 타워에서 사용되는 각 툴을 교체하는 데 필요한 부피을 저장합니다. 이러한 값은 아래의 전체 청소 부피 생성을 단순화하는 데 사용됩니다." msgid "Skip points" msgstr "포인트 건너뛰기" # AI Translated msgid "The wall of prime tower will skip the start points of wipe path." msgstr "프라임 타워의 벽이 청소 경로의 시작점을 건너뜁니다." msgid "Enable tower interface features" msgstr "타워 인터페이스 기능 활성화" # AI Translated msgid "Enable optimized prime tower interface behavior when different materials meet." msgstr "서로 다른 재료가 만나는 지점에서 최적화된 프라임 타워 접점 동작을 활성화합니다." # AI Translated msgid "Cool down from interface boost during prime tower" msgstr "프라임 타워 출력 중 접점 온도 상승분 냉각" # AI Translated msgid "When interface-layer temperature boost is active, set the nozzle back to print temperature at the start of the prime tower so it cools down during the tower." msgstr "접점 레이어 온도 상승이 적용 중일 때, 프라임 타워 시작 시점에 노즐을 출력 온도로 되돌려 타워를 출력하는 동안 식도록 합니다." msgid "Infill gap" msgstr "인필 갭" # AI Translated msgid "Infill gap." msgstr "채우기 간격입니다." msgid "Purging after filament change will be done inside objects' infills. This may lower the amount of waste and decrease the print time. If the walls are printed with transparent filament, the mixed color infill will be visible. It will not take effect unless the prime tower is enabled." msgstr "필라멘트 교체 후 버리기는 객체의 채우기 내부에서 수행됩니다. 이렇게 하면 낭비되는 양이 줄어들고 출력 시간이 단축될 수 있습니다. 벽이 투명 필라멘트로 출력된 경우 혼합 색상 충전재가 외부에 보입니다. 프라임 타워가 활성화되지 않으면 적용되지 않습니다." msgid "Purging after filament change will be done inside objects' support. This may lower the amount of waste and decrease the print time. It will not take effect unless a prime tower is enabled." msgstr "필라멘트 변경 후 버리기는 객체의 서포트 내부에서 수행됩니다. 이렇게 하면 낭비되는 양이 줄어들고 출력 시간이 단축될 수 있습니다. 프라임 타워가 활성화되지 않으면 적용되지 않습니다." msgid "This object will be used to purge the nozzle after a filament change to save filament and decrease the print time. Colors of the objects will be mixed as a result. It will not take effect unless the prime tower is enabled." msgstr "이 객체는 필라멘트를 절약하고 출력 시간을 줄이기 위해 필라멘트 변경 후 노즐에 남은 잔류물을 제거하는 데 사용됩니다. 결과적으로 객체의 색상이 혼합됩니다. 기본 타워가 활성화되지 않으면 적용되지 않습니다." msgid "Maximal bridging distance" msgstr "최대 브릿지 거리" msgid "Maximal distance between supports on sparse infill sections." msgstr "드문 채우기 부분의 서포트 사이의 최대 거리." msgid "Wipe tower purge lines spacing" msgstr "프라임 타워 청소 선 간격" msgid "Spacing of purge lines on the wipe tower." msgstr "프라임 타워의 청소 선 간격입니다." msgid "Extra flow for purging" msgstr "퍼지를 위한 추가 흐름" msgid "Extra flow used for the purging lines on the wipe tower. This makes the purging lines thicker or narrower than they normally would be. The spacing is adjusted automatically." msgstr "와이프 타워의 퍼지 라인에 추가 흐름이 사용됩니다. 이렇게 하면 퍼지 라인이 평소보다 두껍거나 좁아집니다. 간격은 자동으로 조정됩니다." msgid "Idle temperature" msgstr "공회전 온도" msgid "Nozzle temperature when the tool is currently not used in multi-tool setups. This is only used when 'Ooze prevention' is active in Print Settings. Set to 0 to disable." msgstr "도구가 현재 다중 도구 설정에서 사용되지 않을 때의 노즐 온도. 이는 출력 설정에서 '흘러내림 방지'가 활성화된 경우에만 사용됩니다. 비활성화하려면 0으로 설정합니다." msgid "X-Y hole compensation" msgstr "X-Y 구멍 보정" msgid "Holes in objects will expand or contract in the XY plane by the set value. Positive values make holes bigger and negative values make holes smaller. This function is used to adjust sizes slightly when objects have assembly issues." msgstr "객체의 구멍은 구성된 값에 의해 XY 평면에서 커지거나 줄어듭니다. 양수 값은 구멍을 더 크게 만듭니다. 음수 값은 구멍을 더 작게 만듭니다. 이 기능은 개체의 조립 문제가 있을 때 크기를 약간 조정하는 데 사용됩니다" msgid "X-Y contour compensation" msgstr "X-Y 윤곽 보상" msgid "Contours of objects will expand or contract in the XY plane by the set value. Positive values make contours bigger and negative values make contours smaller. This function is used to adjust sizes slightly when objects have assembly issues." msgstr "객체의 윤곽은 구성된 값에 의해 XY 평면에서 커지거나 줄어듭니다. 양수 값은 윤곽선을 더 크게 만듭니다. 음수 값은 윤곽선을 더 작게 만듭니다. 이 기능은 객체의 조립 문제가 있을 때 크기를 약간 조정하는 데 사용됩니다" msgid "Convert holes to polyholes" msgstr "구멍을 폴리홀로 변환" msgid "" "Search for almost-circular holes that span more than one layer and convert the geometry to polyholes. Use the nozzle size and the (biggest) diameter to compute the polyhole.\n" "See http://hydraraptor.blogspot.com/2011/02/polyholes.html" msgstr "" "두 개 이상의 레이어에 걸쳐 있는 원통형 구멍을 검색하고 형상을 폴리홀로 변환합니다(원을 분할하여 작은 삼각형을 만들 때, 꼭지점 수를 늘리고 모서리를 절단하여 공차를 줄임_by MMT). 노즐 크기의 (가장 큰) 직경을 사용하여 폴리홀을 계산합니다.\n" "http://hydraraptor.blogspot.com/2011/02/polyholes.html을 참조하세요" msgid "Polyhole detection margin" msgstr "폴리홀 감지 마진" #, no-c-format, no-boost-format msgid "" "Maximum defection of a point to the estimated radius of the circle.\n" "As cylinders are often exported as triangles of varying size, points may not be on the circle circumference. This setting allows you some leeway to broaden the detection.\n" "In mm or in % of the radius." msgstr "" "원의 추정 반경에 대한 모서리의 최대 변위.\n" "원통은 다양한 크기의 삼각형으로 내보내지는 경우가 많기 때문에 모서리가 원 둘레에 위치하지 않을 수 있습니다. 이 설정을 사용하면 감지 범위를 넓힐 수 있습니다.\n" "mm 또는 반경의 % o단위입니다." msgid "Polyhole twist" msgstr "폴리홀 회전" msgid "Rotate the polyhole every layer." msgstr "레이어마다 폴리홀을 회전시킵니다." # AI Translated msgid "Maximum Polyhole edge count" msgstr "최대 폴리홀 모서리 수" # AI Translated msgid "" "Maximum number of polyhole edges\n" "This setting limits the amount of edges a polyhole can have" msgstr "" "폴리홀 모서리의 최대 개수입니다\n" "이 설정은 폴리홀이 가질 수 있는 모서리 수를 제한합니다" msgid "G-code thumbnails" msgstr "Gcode 미리보기" msgid "Picture sizes to be stored into a .gcode and .sl1 / .sl1s files, in the following format: \"XxY, XxY, ...\"" msgstr "\"XxY, XxY, ...\" 형식으로 .gcode 및 .sl1 / .sl1s 파일에 저장되는 미리보기 크기" msgid "Format of G-code thumbnails" msgstr "Gcode 미리보기 형식" msgid "Format of G-code thumbnails: PNG for best quality, JPG for smallest size, QOI for low memory firmware." msgstr "Gcode 미리보기 포맷: 최고 품질은 PNG, 최소 크기는 JPG, 저메모리 펌웨어는 QOI" msgid "Use relative E distances" msgstr "상대적 E 거리 사용" msgid "Relative extrusion is recommended when using \"label_objects\" option. Some extruders work better with this option unchecked (absolute extrusion mode). Wipe tower is only compatible with relative mode. It is recommended on most printers. Default is checked." msgstr "\"label_objects\" 옵션을 사용할 때는 상대 압출을 권장합니다. 일부 압출기는 이 옵션을 선택하지 않은 경우(절대 압출 모드) 더 잘 작동합니다. 와이프 타워는 상대 모드와만 호환됩니다. 대부분의 프린터에 권장됩니다. 기본값이 선택되어 있습니다" msgid "The classic wall generator produces walls with constant extrusion width and for very thin areas, gap-fill is used. The Arachne engine produces walls with variable extrusion width." msgstr "클래식 벽 생성기는 돌출 폭이 일정한 벽을 생성하며 매우 얇은 영역에는 간격 채움이 사용됩니다. 아라크네 엔진은 압출 폭이 가변적인 벽을 생성합니다." msgid "Arachne" msgstr "아라크네" msgid "Wall transition length" msgstr "벽 변환 길이" msgid "When transitioning between different numbers of walls as the part becomes thinner, a certain amount of space is allotted to split or join the wall segments. It's expressed as a percentage over nozzle diameter." msgstr "부품이 얇아짐에 따라 벽의 수가 변화하는 경우, 벽 구간을 분할하거나 결합하기 위해 일정한 공간이 할당됩니다. 이는 노즐 지름을 기준으로 한 백분율로 표현됩니다" msgid "Wall transitioning filter margin" msgstr "벽 변환 필터 마진" msgid "Prevent transitioning back and forth between one extra wall and one less. This margin extends the range of extrusion widths which follow to [Minimum wall width - margin, 2 * Minimum wall width + margin]. Increasing this margin reduces the number of transitions, which reduces the number of extrusion starts/stops and travel time. However, large extrusion width variation can lead to under- or overextrusion problems. It's expressed as a percentage over nozzle diameter." msgstr "출력물의 벽 두께를 한 번 두껍게 한 다음 다시 한 번 더 얇게 하는 것을 방지합니다. 이 마진은 다음의 범위로 압출 너비를 확장합니다: [최소 벽 너비 - 마진, 2 * 최소 벽 너비 + 마진]. 이 마진이 증가하면 변환 횟수가 줄어들어 압출 시작/중지 횟수와 이동 시간이 줄어듭니다. 그러나, 큰 압출 너비 변동은 압출 과다 또는 압출 과소 문제를 일으킬 수 있습니다. 노즐 직경을 기준으로 백분율로 표시됩니다" msgid "Wall transitioning threshold angle" msgstr "벽 변환 임계값" msgid "When to create transitions between even and odd numbers of walls. A wedge shape with an angle greater than this setting will not have transitions and no walls will be printed in the center to fill the remaining space. Reducing this setting reduces the number and length of these center walls, but may leave gaps or overextrude." msgstr "벽의 짝수와 홀수 사이에 변환을 만드는 시기. 이 설정보다 큰 각도의 쐐기 모양은 변환되지 않으며 나머지 공간 채우기를 위해 중앙에 벽이 출력되지 않습니다. 이 설정을 줄이면 중앙 벽의 수와 길이가 줄어들지만 간격이 남거나 과도하게 돌출될 수 있습니다" msgid "Wall distribution count" msgstr "벽 분포 수" msgid "The number of walls, counted from the center, over which the variation needs to be spread. Lower values mean that the outer walls don't change in width." msgstr "변환을 분산해야 하는 벽의 개수(중심에서 카운트)입니다. 값이 낮으면 외벽의 너비가 변경되지 않습니다" msgid "Minimum feature size" msgstr "최소 형상 크기" # AI Translated msgid "Minimum thickness of thin features. Model features that are thinner than this value will not be printed, while features thicker than than this value will be widened to the minimum wall width. It's expressed as a percentage over nozzle diameter." msgstr "얇은 형상의 최소 두께입니다. 이 값보다 얇은 모델 형상은 출력되지 않으며, 이 값보다 두꺼운 형상은 최소 벽 너비까지 넓어집니다. 노즐 직경에 대한 백분율로 표시됩니다." msgid "Minimum wall length" msgstr "최소 벽 길이" msgid "" "Adjust this value to prevent short, unclosed walls from being printed, which could increase print time. Higher values remove more and longer walls.\n" "\n" "NOTE: Bottom and top surfaces will not be affected by this value to prevent visual gaps on the outside of the model. Adjust 'One wall threshold' in the Advanced settings below to adjust the sensitivity of what is considered a top-surface. 'One wall threshold' is only visible if this setting is set above the default value of 0.5, or if single-wall top surfaces is enabled." msgstr "" "짧고 닫히지 않은 벽이 출력되는 것을 방지하려면 이 값을 조정하십시오. 이로 인해 출력 시간이 늘어날 수 있습니다. 값이 높을수록 더 많은 벽과 긴 벽이 제거됩니다.\n" "\n" "참고: 모델 외부의 시각적 틈을 방지하기 위해 하단 및 상단 표면은 이 값의 영향을 받지 않습니다. 상단 표면으로 간주되는 항목의 감도를 조정하려면 아래 고급 설정에서 '벽 하나의 임계값'을 조정하세요. '하나의 벽 임계값'은 이 설정이 기본값인 0.5보다 높게 설정되거나 단일 벽 상단 표면이 활성화된 경우에만 표시됩니다." # AI Translated msgid "Maximum wall resolution" msgstr "최대 벽 해상도" # AI Translated msgid "This value determines the smallest wall line segment length in mm. The smaller you set this value, the more accurate and precise the walls will be." msgstr "벽 선분의 최소 길이를 mm 단위로 결정합니다. 이 값을 작게 설정할수록 벽이 더 정확하고 정밀해집니다." # AI Translated msgid "Maximum wall deviation" msgstr "최대 벽 편차" # AI Translated msgid "The maximum deviation allowed when reducing the resolution for the 'Maximum wall resolution' setting. If you increase this, the print will be less accurate, but the G-Code will be smaller. 'Maximum wall deviation' limits 'Maximum wall resolution', so if the two conflict, 'Maximum wall deviation' takes precedence." msgstr "'최대 벽 해상도' 설정에 따라 해상도를 낮출 때 허용되는 최대 편차입니다. 이 값을 키우면 출력 정확도는 떨어지지만 G-code 크기는 작아집니다. '최대 벽 편차'는 '최대 벽 해상도'를 제한하므로, 두 설정이 충돌하면 '최대 벽 편차'가 우선합니다." msgid "First layer minimum wall width" msgstr "첫 레이어 최소 벽 너비" msgid "The minimum wall width that should be used for the first layer is recommended to be set to the same size as the nozzle. This adjustment is expected to enhance adhesion." msgstr "첫 번째 레이어에 사용되는 최소 벽 너비는 노즐과 동일한 크기로 설정하는 것이 좋습니다. 이러한 조정을 통해 접착력이 향상될 수 있습니다." msgid "Minimum wall width" msgstr "최소 벽 너비" msgid "Width of the wall that will replace thin features (according to the Minimum feature size) of the model. If the Minimum wall width is thinner than the thickness of the feature, the wall will become as thick as the feature itself. It's expressed as a percentage over nozzle diameter." msgstr "모델의 얇은 형상(최소 형상 크기에 따름)을 대체할 벽의 너비입니다. 최소 벽 너비가 형상의 두께보다 얇은 경우 벽은 형상 자체만큼 두꺼워집니다. 노즐 직경에 대한 백분율로 표시됩니다" msgid "Hotend change time" msgstr "핫엔드 교체 시간" msgid "Time to change hotend." msgstr "핫엔드를 교체할 시간입니다." msgid "Hotend change" msgstr "핫엔드 교체" msgid "When changing the hotend, it is recommended to extrude a certain length of filament from the original nozzle. This helps minimize nozzle oozing." msgstr "핫엔드를 교체할 때는 원래 노즐에서 일정 길이의 필라멘트를 압출하는 것이 좋습니다. 이렇게 하면 노즐 흘러내림을 최소화할 수 있습니다." msgid "Extruder change" msgstr "압출기 교체" msgid "To prevent oozing, the nozzle will perform a reverse travel movement for a certain period after the ramming is complete. The setting define the travel time." msgstr "흘러내림을 방지하기 위해 노즐은 래밍이 완료된 후 일정 시간 동안 역방향 이동을 수행합니다. 이 설정은 이동 시간을 정의합니다." msgid "To prevent oozing, the nozzle temperature will be cooled during ramming. Therefore, the ramming time must be greater than the cooldown time. 0 means disabled." msgstr "흘러내림을 방지하기 위해 래밍하는 동안 노즐 온도가 냉각됩니다. 따라서 래밍 시간은 쿨다운 시간보다 길어야 합니다. 0은 비활성화를 의미합니다." msgid "The maximum volumetric speed for ramming before extruder change, where -1 means using the maximum volumetric speed." msgstr "압출기 교체 전 충돌을 위한 최대 체적 속도이며, 여기서 -1은 최대 체적 속도를 사용함을 의미합니다." msgid "To prevent oozing, the nozzle temperature will be cooled during ramming. Note: only a cooldown command and fan activation are triggered, reaching the target temperature is not guaranteed. 0 means disabled." msgstr "누수 방지를 위해 충돌 중 노즐 온도가 낮아집니다. 참고: 냉각 명령과 팬 작동만 실행되며, 목표 온도 도달은 보장되지 않습니다. 0은 비활성화를 의미합니다." msgid "The maximum volumetric speed for ramming before a hotend change, where -1 means using the maximum volumetric speed." msgstr "핫엔드 교체 전에 적용되는 충돌의 최대 체적 속도이며, 여기서 -1은 최대 체적 속도를 사용함을 의미합니다." msgid "length when change hotend" msgstr "핫엔드 교체 시 길이" msgid "When this retraction value is modified, it will be used as the amount of filament retracted inside the hotend before changing hotends." msgstr "이 수축 값이 수정되면 핫엔드를 변경하기 전에 핫엔드 내부로 수축되는 필라멘트 양으로 사용됩니다." # AI Translated msgid "Support fast purge mode" msgstr "고속 퍼지 모드 지원" # AI Translated msgid "Whether this printer supports fast purge mode with optimized temperature and multiplier." msgstr "이 프린터가 최적화된 온도와 배수를 사용하는 고속 퍼지 모드를 지원하는지 여부입니다." # AI Translated msgid "Filament change" msgstr "필라멘트 교체" # AI Translated msgid "The volume of material required to prime the extruder on the tower, excluding a hotend change." msgstr "핫엔드 교체를 제외하고 타워에서 압출기를 프라임하는 데 필요한 재료의 부피입니다." msgid "The volume of material required to prime the extruder for a hotend change on the tower." msgstr "타워에서 핫엔드를 교체하기 위해 압출기를 준비하는 데 필요한 재료 부피." msgid "Preheat temperature delta" msgstr "예열 온도 차이" msgid "Temperature delta applied during pre-heating before tool change." msgstr "도구 교체 전 예열 과정에서 적용되는 온도 차이입니다." msgid "Detect narrow internal solid infills" msgstr "좁은 꽉찬 내부 채우기 감지" msgid "This option will auto-detect narrow internal solid infill areas. If enabled, the concentric pattern will be used for the area to speed up printing. Otherwise, the rectilinear pattern will be used by default." msgstr "이 옵션은 좁은 꽉찬 내부 채우기 영역을 자동으로 감지합니다. 활성화하면 출력 속도를 높이기 위해 해당 영역에 동심 패턴이 사용됩니다. 그렇지 않으면 기본적으로 직선 패턴이 사용됩니다." msgid "invalid value " msgstr "잘못된 값 " msgid "Invalid value when spiral vase mode is enabled: " msgstr "나선형 꽃병 모드가 활성화된 경우 유효하지 않은 값: " # AI Translated msgid "Bridge line width must not exceed nozzle diameter: " msgstr "브릿지 선 너비는 노즐 직경을 초과할 수 없습니다: " msgid "too large line width " msgstr "너무 넓은 선 너비 " msgid " not in range " msgstr " 범위를 벗어남 " msgid "Export 3MF" msgstr "3MF 내보내기" msgid "This exports the project as a 3MF file." msgstr "프로젝트를 3MF로 내보내기." msgid "Export slicing data" msgstr "슬라이싱 데이터 내보내기" msgid "Export slicing data to a folder" msgstr "슬라이싱 데이터 폴더로 내보내기." msgid "Load slicing data" msgstr "슬라이싱 데이터 로드" msgid "Load cached slicing data from directory." msgstr "디렉토리에 캐시된 슬라이싱 데이터 로드" msgid "Export STL" msgstr "STL 내보내기" msgid "Export the objects as single STL." msgstr "객체를 단일 STL로 내보냅니다." msgid "Export multiple STLs" msgstr "여러 STL을 내보내기" msgid "Export the objects as multiple STLs to directory." msgstr "객체를 여러 STL로 경로에 내보내기" msgid "Slice the plates: 0-all plates, i-plate i, others-invalid" msgstr "플레이트 슬라이스: 0-모든 플레이트, i-플레이트 i, 기타-잘못됨" msgid "This shows command help." msgstr "명령 도움말을 표시합니다." msgid "UpToDate" msgstr "최신 정보" msgid "Update the config values of 3MF to latest." msgstr "3mf의 구성 값을 최신으로 업데이트합니다." msgid "Load default filaments" msgstr "기본 필라멘트 로드" msgid "Load first filament as default for those not loaded." msgstr "로드되지 않은 경우 기본값으로 첫 번째 필라멘트 로드" msgid "Minimum save" msgstr "최소 크기로 저장" msgid "Export 3MF with minimum size." msgstr "최소 크기로 3mf를 내보냅니다." msgid "mtcpp" msgstr "mtcpp" msgid "max triangle count per plate for slicing" msgstr "슬라이싱을 위한 플레이트당 최대 삼각형 개수." msgid "mstpp" msgstr "mstpp" msgid "max slicing time per plate in seconds" msgstr "플레이트당 최대 슬라이싱 시간(초)" msgid "No check" msgstr "확인 안 함" msgid "Do not run any validity checks, such as G-code path conflicts check." msgstr "Gcode 경로 충돌 검사와 같은 유효성 검사를 실행하지 마십시오." msgid "Normative check" msgstr "표준 검사" msgid "Check the normative items." msgstr "표준 항목을 확인합니다." msgid "Output Model Info" msgstr "모델 정보 출력" msgid "This outputs the model’s information." msgstr "모델 정보를 출력합니다." msgid "Export Settings" msgstr "설정 내보내기" msgid "This exports settings to a file." msgstr "설정을 파일로 내보내기." msgid "Send progress to pipe" msgstr "진행 상황을 파이프로 보내기" msgid "Send progress to pipe." msgstr "진행 상황을 파이프로 보내기." msgid "Arrange Options" msgstr "정렬 옵션" msgid "Arrange options: 0-disable, 1-enable, others-auto" msgstr "정렬 옵션: 0-사용 안 함, 1-사용, 기타-자동" msgid "Repetition count" msgstr "반복 횟수" msgid "Repetition count of the whole model." msgstr "전체 모델의 반복 횟수" msgid "Ensure on bed" msgstr "베드에서 확인" msgid "Lift the object above the bed when it is partially below. Disabled by default." msgstr "객체의 일부가 베드 아래에 있을 때 베드 위로 객체를 들어올립니다. 기본적으로 비활성화됩니다" msgid "Arrange the supplied models in a plate and merge them in a single model in order to perform actions once." msgstr "제공된 모델을 플레이트에 배열하고 단일 모델로 병합하여 작업을 한 번 수행합니다." msgid "Convert Unit" msgstr "단위 변환" msgid "Convert the units of model." msgstr "모델의 단위를 변환" msgid "Orient Options" msgstr "방향 최적화 옵션" msgid "Orient options: 0-disable, 1-enable, others-auto" msgstr "방향 최적화 옵션: 0-비활성화, 1-활성화, 기타-자동" msgid "Rotation angle around the Z axis in degrees." msgstr "Z축을 중심으로 한 회전 각도입니다." msgid "Rotate around X" msgstr "X를 중심으로 회전" msgid "Rotation angle around the X axis in degrees." msgstr "X축을 중심으로 한 회전 각도입니다." msgid "Rotate around Y" msgstr "Y를 중심으로 회전" msgid "Rotation angle around the Y axis in degrees." msgstr "Y축을 중심으로 한 회전 각도입니다." msgid "Scale the model by a float factor." msgstr "부동 소수점 계수로 모델 크기 조정" msgid "Load General Settings" msgstr "일반 설정 로드" msgid "Load process/machine settings from the specified file." msgstr "지정된 파일에서 프로세스/장치 설정 로드" msgid "Load Filament Settings" msgstr "필라멘트 설정 로드" msgid "Load filament settings from the specified file list." msgstr "지정된 파일 목록에서 필라멘트 설정 불러오기" msgid "Skip Objects" msgstr "객체 건너뛰기" msgid "Skip some objects in this print." msgstr "이 출력에서 일부 객체를 건너뜁니다" msgid "Clone Objects" msgstr "객체 복제" msgid "Clone objects in the load list." msgstr "로드 목록에서 객체 복제" msgid "Load uptodate process/machine settings when using uptodate" msgstr "uptodate 사용 시 최신 프로세스/프린터 설정 로드" msgid "load up-to-date process/machine settings from the specified file when using up-to-date" msgstr "uptodate를 사용할 때 지정된 파일에서 최신 프로세스/프린터 설정을 로드합니다" msgid "Load uptodate filament settings when using uptodate" msgstr "최신 필라멘트 설정 사용 시 최신 필라멘트 설정 로드" msgid "Load uptodate filament settings from the specified file when using uptodate." msgstr "최신 필라멘트 설정을 사용할 때 지정된 파일에서 최신 필라멘트 설정을 로드합니다." # AI Translated msgid "Downward machines check" msgstr "하위 호환 장비 확인" msgid "If enabled, check whether current machine downward compatible with the machines in the list." msgstr "활성화된 경우 현재 컴퓨터가 목록에 있는 컴퓨터와 하위 호환되는지 확인합니다." msgid "Downward machines settings" msgstr "하향 머신 설정" msgid "The machine settings list needs to do downward checking." msgstr "머신 설정 목록에서 아래쪽을 확인해야 합니다" msgid "Load assemble list" msgstr "조립 목록 로드" msgid "Load assemble object list from config file." msgstr "구성 파일에서 조립 객체 목록 로드" msgid "Data directory" msgstr "데이터 디렉토리" msgid "Load and store settings at the given directory. This is useful for maintaining different profiles or including configurations from a network storage." msgstr "지정된 디렉토리에 설정을 로드하고 저장합니다. 이 기능은 서로 다른 사전설정을 유지하거나 네트워크 스토리지의 구성을 포함하는 데 유용합니다." msgid "Output directory" msgstr "출력 디렉토리" msgid "This is the output directory for exported files." msgstr "내보내기 파일의 출력 디렉토리입니다." msgid "Debug level" msgstr "디버그 수준" msgid "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:trace\n" msgstr "디버그 로깅 수준을 설정합니다. 0:치명적, 1:오류, 2:경고, 3:정보, 4:디버그, 5:추적\n" # AI Translated msgid "Log file" msgstr "로그 파일" # AI Translated msgid "Redirects debug logging to file.\n" msgstr "디버그 로그를 파일로 전환합니다.\n" msgid "Enable timelapse for print" msgstr "출력에 타임랩스 활성화" msgid "If enabled, this slicing will be considered using timelapse." msgstr "활성화하면 타임랩스를 사용하여 이 슬라이싱을 고려합니다" msgid "Load custom G-code" msgstr "사용자 정의 Gcode 불러오기" msgid "Load custom G-code from json." msgstr "사용자 정의 Gcode를 json에서 불러오기." msgid "Load filament IDs" msgstr "필라멘트 ID 불러오기" msgid "Load filament IDs for each object." msgstr "각 객체에 대한 필라멘트 ID 로드" msgid "Allow multiple colors on one plate" msgstr "한 플레이트에서 여러 색상 허용" msgid "If enabled, Arrange will allow multiple colors on one plate." msgstr "활성화하면 하나의 플레이트에 여러 색상을 허용합니다" msgid "Allow rotation when arranging" msgstr "정렬할 때 회전 허용" msgid "If enabled, Arrange will allow rotation when placing objects." msgstr "활성화하면 객체를 배치할 때 배열이 회전을 허용합니다" msgid "Avoid extrusion calibrate region when arranging" msgstr "정렬 시 돌출 보정 영역을 피하십시오." msgid "If enabled, Arrange will avoid extrusion calibrate region when placing objects." msgstr "활성화하면 객체를 배치할 때 돌출 보정 영역을 피합니다" msgid "Skip modified G-code in 3MF" msgstr "3mf에서 수정된 Gcode 건너뛰기" msgid "Skip the modified G-code in 3MF from printer or filament presets." msgstr "프린터 또는 필라멘트 사전 설정에서 3mf의 수정된 Gcode 건너뛰기" msgid "MakerLab name" msgstr "메이커 랩 이름" msgid "MakerLab name to generate this 3MF." msgstr "이 3mf를 생성하는 메이커랩 이름" msgid "MakerLab version" msgstr "메이커 랩 버전" msgid "MakerLab version to generate this 3MF." msgstr "이 3mf를 생성하기 위한 메이커랩 버전" msgid "Metadata name list" msgstr "메타데이터 이름 목록" msgid "Metadata name list added into 3MF." msgstr "3mf에 메타데이터 이름 목록 추가됨" msgid "Metadata value list" msgstr "메타데이터 값 목록" msgid "Metadata value list added into 3MF." msgstr "메타데이터 값 목록이 3MF에 추가됨" # AI Translated msgid "Allow 3MF with newer version to be sliced" msgstr "더 최신 버전의 3MF도 슬라이스 허용" msgid "Allow 3MF with newer version to be sliced." msgstr "최신 버전의 3mf를 슬라이스하도록 허용" msgid "Current Z-hop" msgstr "현재 Z올리기" msgid "Contains Z-hop present at the beginning of the custom G-code block." msgstr "사용자 정의 Gcode 블록의 시작 부분에 있는 Z올리기를 포함합니다." msgid "Position of the extruder at the beginning of the custom G-code block. If the custom G-code travels somewhere else, it should write to this variable so OrcaSlicer knows where it travels from when it gets control back." msgstr "사용자 정의 Gcode 블록 시작 부분의 압출기 위치입니다. 사용자 정의 Gcode가 다른 곳으로 이동하는 경우 PrusaSlicer가 제어권을 다시 얻을 때 이동 위치를 알 수 있도록 이 변수에 기록해야 합니다." msgid "Retraction state at the beginning of the custom G-code block. If the custom G-code moves the extruder axis, it should write to this variable so OrcaSlicer de-retracts correctly when it gets control back." msgstr "사용자 정의 Gcode 블록 시작 부분의 후퇴 상태입니다. 사용자 정의 Gcode가 압출기 축을 이동하는 경우 PrusaSlicer가 다시 제어권을 얻었을 때 올바르게 후퇴할 수 있도록 이 변수에 기록해야 합니다." msgid "Extra de-retraction" msgstr "추가 후퇴" msgid "Currently planned extra extruder priming after de-retraction." msgstr "현재 후퇴 후 추가 압출기 프라이밍이 계획되어 있습니다." msgid "Absolute E position" msgstr "절대 E 위치" msgid "Current position of the extruder axis. Only used with absolute extruder addressing." msgstr "압출기 축의 현재 위치입니다. 절대 압출기 주소 지정에만 사용됩니다." msgid "Current extruder" msgstr "현재 압출기" msgid "Zero-based index of currently used extruder." msgstr "현재 사용되는 압출기의 0 기반 인덱스입니다." msgid "Current object index" msgstr "현재 객체 인덱스" msgid "Specific for sequential printing. Zero-based index of currently printed object." msgstr "순차 출력에만 해당됩니다. 현재 출력된 객체의 0 기반 인덱스입니다." msgid "Has wipe tower" msgstr "와이프 타워 있음" msgid "Whether or not wipe tower is being generated in the print." msgstr "출력물에 와이프타워가 생성되는지 여부입니다." msgid "Initial extruder" msgstr "초기 압출기" msgid "Zero-based index of the first extruder used in the print. Same as initial_tool." msgstr "출력에 사용된 첫 번째 압출기의 0 기반 인덱스입니다. 초기 도구와 동일합니다." msgid "Initial tool" msgstr "초기 도구" msgid "Zero-based index of the first extruder used in the print. Same as initial_extruder." msgstr "출력에 사용된 첫 번째 압출기의 0 기반 인덱스입니다. 초기_압출기와 동일합니다." msgid "Is extruder used?" msgstr "압출기를 사용하나요?" msgid "Vector of booleans stating whether a given extruder is used in the print." msgstr "특정 압출기가 출력에 사용되는지 여부를 나타내는 값 입니다." msgid "Number of extruders" msgstr "압출기 수" msgid "Total number of extruders, regardless of whether they are used in the current print." msgstr "현재 프린트에 사용되는지 여부에 관계없이 총 압출기 수입니다." msgid "Has single extruder MM priming" msgstr "단일 압출기 MM 프라이밍 있음" msgid "Are the extra multi-material priming regions used in this print?" msgstr "이 출력물에 추가 다중 재료 프라이밍 영역이 사용됩니까?" msgid "Volume per extruder" msgstr "압출기당 부피" msgid "Total filament volume extruded per extruder during the entire print." msgstr "전체 프린트 동안 압출기당 압출된 총 필라멘트 양입니다." msgid "Total tool changes" msgstr "총 툴 체인지" msgid "Number of tool changes during the print." msgstr "출력 중 도구 교환 횟수." msgid "Total volume" msgstr "총 부피" msgid "Total volume of filament used during the entire print." msgstr "전체 프린트 중에 사용된 필라멘트의 총량입니다." msgid "Weight per extruder" msgstr "압출기당 무게" msgid "Weight per extruder extruded during the entire print. Calculated from filament_density value in Filament Settings." msgstr "전체 프린트 동안 압출된 압출기당 무게입니다. 필라멘트 설정의 filment_density 값에서 계산됩니다." msgid "Total weight" msgstr "총 무게" msgid "Total weight of the print. Calculated from filament_density value in Filament Settings." msgstr "출력물의 총 무게입니다. 필라멘트 설정의 filment_density 값에서 계산됩니다." msgid "Total layer count" msgstr "총 레이어 수" msgid "Number of layers in the entire print." msgstr "전체 출력의 레이어 수입니다." # AI Translated msgid "Print time (normal mode)" msgstr "출력 시간(일반 모드)" # AI Translated msgid "Estimated print time when printed in normal mode (i.e. not in silent mode). Same as print_time." msgstr "일반 모드(즉, 저소음 모드가 아닌 상태)로 출력할 때의 예상 출력 시간입니다. print_time과 동일합니다." # AI Translated msgid "Estimated print time when printed in normal mode (i.e. not in silent mode). Same as normal_print_time." msgstr "일반 모드(즉, 저소음 모드가 아닌 상태)로 출력할 때의 예상 출력 시간입니다. normal_print_time과 동일합니다." # AI Translated msgid "Print time (silent mode)" msgstr "출력 시간(저소음 모드)" # AI Translated msgid "Estimated print time when printed in silent mode." msgstr "저소음 모드로 출력할 때의 예상 출력 시간입니다." # AI Translated msgid "Total cost of all material used in the print. Calculated from filament_cost value in Filament Settings." msgstr "출력에 사용된 모든 재료의 총 비용입니다. 필라멘트 설정의 filament_cost 값으로 계산됩니다." # AI Translated msgid "Total wipe tower cost" msgstr "프라임 타워 총 비용" # AI Translated msgid "Total cost of the material wasted on the wipe tower. Calculated from filament_cost value in Filament Settings." msgstr "프라임 타워에서 낭비된 재료의 총 비용입니다. 필라멘트 설정의 filament_cost 값으로 계산됩니다." # AI Translated msgid "Wipe tower volume" msgstr "프라임 타워 부피" # AI Translated msgid "Total filament volume extruded on the wipe tower." msgstr "프라임 타워에 압출된 총 필라멘트 부피입니다." msgid "Used filament" msgstr "사용된 필라멘트" # AI Translated msgid "Total length of filament used in the print." msgstr "출력에 사용된 필라멘트의 총 길이입니다." # AI Translated msgid "Print time (seconds)" msgstr "출력 시간(초)" # AI Translated msgid "Total estimated print time in seconds. Replaced with actual value during post-processing." msgstr "초 단위의 총 예상 출력 시간입니다. 후처리 중에 실제 값으로 대체됩니다." # AI Translated msgid "Filament length (meters)" msgstr "필라멘트 길이(미터)" # AI Translated msgid "Total filament length used in meters. Replaced with actual value during post-processing." msgstr "사용된 총 필라멘트 길이(미터)입니다. 후처리 중에 실제 값으로 대체됩니다." msgid "Number of objects" msgstr "객체 수" msgid "Total number of objects in the print." msgstr "출력물의 총 객체 수입니다." msgid "Number of instances" msgstr "인스턴스 수" msgid "Total number of object instances in the print, summed over all objects." msgstr "모든 객체에 대해 합산된 출력물의 총 객체 인스턴스 수입니다." msgid "Scale per object" msgstr "객체당 크기 조정" msgid "" "Contains a string with the information about what scaling was applied to the individual objects. Indexing of the objects is zero-based (first object has index 0).\n" "Example: 'x:100% y:50% z:100%'." msgstr "" "개별 객체에 어떤 크기 조정이 적용되었는지에 대한 정보가 포함된 문자열을 포함합니다. 객체의 인덱싱은 0부터 시작합니다(첫 번째 객체의 인덱스는 0입니다).\n" "예: 'x:100% y:50% z:100%'." msgid "Input filename without extension" msgstr "확장자가 없는 입력 파일 이름" msgid "Source filename of the first object, without extension." msgstr "확장자가 없는 첫 번째 객체의 소스 파일 이름입니다." msgid "The vector has two elements: X and Y coordinate of the point. Values in mm." msgstr "벡터에는 점의 x 및 y 좌표라는 두 가지 요소가 있습니다. 값(mm)" msgid "The vector has two elements: X and Y dimension of the bounding box. Values in mm." msgstr "벡터에는 경계 상자의 x 및 y 차원이라는 두 가지 요소가 있습니다. 값(mm)" msgid "First layer convex hull" msgstr "첫 번째 레이어 볼록 껍질" msgid "Vector of points of the first layer convex hull. Each element has the following format:'[x, y]' (x and y are floating-point numbers in mm)." msgstr "첫 번째 레이어 볼록 껍질의 점으로 구성된 벡터입니다. 각 요소의 형식은 '[x, y]'입니다(x 및 y는 mm 단위의 부동 소수점 숫자입니다)." msgid "Bottom-left corner of the first layer bounding box" msgstr "첫 번째 레이어 경계 상자의 왼쪽 하단 모서리" msgid "Top-right corner of the first layer bounding box" msgstr "첫 번째 레이어 경계 상자의 오른쪽 위 모서리" msgid "Size of the first layer bounding box" msgstr "첫 번째 레이어 경계 상자의 크기" msgid "Bottom-left corner of print bed bounding box" msgstr "출력 베드 경계 상자의 왼쪽 하단 모서리" msgid "Top-right corner of print bed bounding box" msgstr "출력 베드 경계 상자의 오른쪽 상단 모서리" msgid "Size of the print bed bounding box" msgstr "출력 베드 경계 상자의 크기" msgid "Timestamp" msgstr "타임스탬프" msgid "String containing current time in yyyyMMdd-hhmmss format." msgstr "현재 시간의 형식이 yyyyMMdd-hhmmss 포함하는 문자열입니다." msgid "Day" msgstr "일" msgid "Hour" msgstr "시간" msgid "Minute" msgstr "분" msgid "Second" msgstr "초" msgid "Print preset name" msgstr "사전 설정 이름 출력" msgid "Name of the print preset used for slicing." msgstr "슬라이스에 사용되는 출력 사전 설정의 이름입니다." msgid "Filament preset name" msgstr "필라멘트 사전 설정 이름" msgid "Names of the filament presets used for slicing. The variable is a vector containing one name for each extruder." msgstr "슬라이싱에 사용되는 필라멘트 사전 설정의 이름입니다. 변수는 각 압출기의 이름 하나를 포함하는 벡터입니다." msgid "Printer preset name" msgstr "프린터 사전 설정 이름" msgid "Name of the printer preset used for slicing." msgstr "슬라이스에 사용되는 프린터 사전 설정의 이름입니다." msgid "Physical printer name" msgstr "실제 프린터 이름" msgid "Name of the physical printer used for slicing." msgstr "슬라이싱에 사용되는 실제 프린터의 이름입니다." msgid "Layer number" msgstr "레이어 번호" msgid "Index of the current layer. One-based (i.e. first layer is number 1)." msgstr "현재 레이어의 인덱스입니다. 1 기반(즉, 첫 번째 레이어가 1번입니다)." msgid "Layer Z" msgstr "레이어 z" msgid "Height of the current layer above the print bed, measured to the top of the layer." msgstr "레이어 상단까지 측정된 출력 베드 위의 현재 레이어 높이입니다." msgid "Maximal layer Z" msgstr "최대 레이어 z" msgid "Height of the last layer above the print bed." msgstr "출력 베드 위의 마지막 레이어 높이입니다." msgid "Filament extruder ID" msgstr "필라멘트 압출기 ID" msgid "The current extruder ID. The same as current_extruder." msgstr "현재 압출기 ID입니다. current_extruder와 동일합니다." msgid "Error in zip archive" msgstr "ZIP 압축파일 오류" msgid "Generating walls" msgstr "벽 생성 중" msgid "Generating infill regions" msgstr "채우기 영역 생성 중" msgid "Generating infill toolpath" msgstr "채우기 툴 경로 생성 중" msgid "Detect overhangs for auto-lift" msgstr "Z 올리기를 위한 오버행 감지" msgid "Checking support necessity" msgstr "서포트 필요성 확인" msgid "floating regions" msgstr "떠있는 영역" msgid "floating cantilever" msgstr "떠있는 외팔보" msgid "large overhangs" msgstr "큰 오버행" #, c-format, boost-format msgid "It seems object %s has %s. Please re-orient the object or enable support generation." msgstr "객체 %s에 %s가 있는 것 같습니다. 물체의 방향을 바꾸거나 서포트 생성을 활성화하세요." msgid "Generating support" msgstr "서포트 생성 중" msgid "Optimizing toolpath" msgstr "툴 경로 최적화" msgid "Slicing mesh" msgstr "슬라이싱 메시" msgid "No layers were detected. You might want to repair your STL file(s) or check their size or thickness and retry.\n" msgstr "감지된 레이어가 없습니다. STL 파일을 고치거나 크기 또는 두께를 확인하고 다시 시도할 수 있습니다.\n" msgid "" "An object's XY size compensation will not be used because it is also color-painted.\n" "XY Size compensation cannot be combined with color-painting." msgstr "" "객체의 XY 크기 보정은 색으로 칠해져 있기 때문에 사용되지 않습니다.\n" "XY 크기 보정은 컬러 페인팅과 결합할 수 없습니다." msgid "" "An object has enabled XY Size compensation which will not be used because it is also fuzzy skin painted.\n" "XY Size compensation cannot be combined with fuzzy skin painting." msgstr "" "물체가 XY 크기 교정을 활성화했으며, 이 교정도 솜털 표면이 페인팅되었기 때문에 사용되지 않습니다.\n" "XY 크기 교정은 솜털 표면 페인팅과 결합할 수 없습니다." msgid "Object name" msgstr "물체 이름" msgid "Support: generate contact points" msgstr "서포트: 접점 생성" msgid "Loading of a model file failed." msgstr "모델 파일 로드에 실패했습니다." msgid "Meshing of a model file failed or no valid shape." msgstr "모델 파일의 메싱이 실패했거나 유효한 형태가 없습니다." msgid "The supplied file couldn't be read because it's empty." msgstr "제공된 파일이 비어 있어 읽을 수 없습니다" msgid "Unknown file format: input file must have .stl, .obj, or .amf(.xml) extension." msgstr "알 수 없는 파일 형식: 입력 파일의 확장자는 .stl, .obj 또는 .amf(.xml)여야 합니다." msgid "Unknown file format: input file must have .3mf or .zip.amf extension." msgstr "알 수 없는 파일 형식: 입력 파일의 확장자는.3mf 또는.zip.amf여야 합니다." msgid "load_obj: failed to parse" msgstr "load_obj: 구문 분석에 실패" msgid "load mtl in obj: failed to parse" msgstr "obj에 mtl 로드: 구문 ​​분석에 실패했습니다" msgid "The file contains polygons with more than 4 vertices." msgstr "이 파일에는 꼭지점이 4개 이상인 다각형이 포함되어 있습니다." msgid "The file contains polygons with less than 2 vertices." msgstr "이 파일에는 꼭지점이 2개 미만인 다각형이 포함되어 있습니다." msgid "The file contains invalid vertex index." msgstr "파일에 잘못된 꼭지점 인덱스가 포함되어 있습니다." msgid "This OBJ file couldn't be read because it's empty." msgstr "이 OBJ 파일은 비어 있어서 읽을 수 없습니다." msgid "Max Volumetric Speed Calibration" msgstr "최대 압출 속도 교정" msgid "Manage Result" msgstr "결과 관리" msgid "Manual Calibration" msgstr "수동 교정" msgid "Result can be read by human eyes." msgstr "결과를 눈으로 직접 보아야 합니다." msgid "Auto-Calibration" msgstr "자동 교정" msgid "We would use Lidar to read the calibration result" msgstr "라이다를 사용하여 교정 결과를 읽습니다" msgid "Prev" msgstr "이전" msgid "Recalibration" msgstr "재교정" msgid "Calibrate" msgstr "교정" msgid "Finish" msgstr "완료" msgid "How can I use calibration results?" msgstr "교정 결과를 어떻게 사용하나요?" msgid "You could change the Flow Dynamics Calibration Factor in material editing" msgstr "재료 편집에서 동적 압출량 교정 계수를 변경할 수 있습니다" msgid "" "The current firmware version of the printer does not support calibration.\n" "Please upgrade the printer firmware." msgstr "" "프린터의 현재 펌웨어 버전은 교정을 지원하지 않습니다.\n" "프린터 펌웨어를 업그레이드하세요." msgid "Calibration not supported" msgstr "교정이 지원되지 않음" msgid "Flow Dynamics" msgstr "동적 압출량" msgid "Max Volumetric Speed" msgstr "최대 압출 속도" #, c-format, boost-format msgid "" "Please input valid values:\n" "Start value: >= %.1f\n" "End value: <= %.1f\n" "End value: > Start value\n" "Value step: >= %.3f" msgstr "" "유효한 값을 입력하세요:\n" "시작 값: >= %.1f\n" "종료 값: <= %.1f\n" "종료 값: > 시작 값\n" "값 단계: >= %.3f)" msgid "The name cannot be empty." msgstr "이름은 비워둘 수 없습니다." #, c-format, boost-format msgid "The selected preset: %s was not found." msgstr "선택한 사전 설정: %s을 찾을 수 없습니다." msgid "The name cannot be the same as the system preset name." msgstr "이름은 시스템 사전 설정 이름과 동일할 수 없습니다." msgid "The name is the same as another existing preset name" msgstr "이름이 기존의 다른 사전 설정 이름과 동일합니다" msgid "create new preset failed." msgstr "새 사전 설정을 생성하지 못했습니다." #, c-format, boost-format msgid "Could not find parameter: %s." msgstr "매개 변수를 찾을 수 없습니다: %s." msgid "Are you sure to cancel the current calibration and return to the home page?" msgstr "현재 교정을 취소하고 홈 페이지로 돌아가시겠습니까?" msgid "No Printer Connected!" msgstr "연결된 프린터가 없습니다!" msgid "Printer is not connected yet." msgstr "프린터가 아직 연결되지 않았습니다." msgid "Please select filament to calibrate." msgstr "교정할 필라멘트를 선택하세요." msgid "The input value size must be 3." msgstr "입력 값 크기는 3이어야 합니다." msgid "" "This machine type can only hold 16 historical results per nozzle. You can delete the existing historical results and then start calibration. Or you can continue the calibration, but you cannot create new calibration historical results.\n" "Do you still want to continue the calibration?" msgstr "" "이 기계 유형은 노즐당 16개의 기록 결과만 보유할 수 있습니다. 기존 기록 결과를 삭제한 후 교정을 시작할 수 있습니다. 또는 교정을 계속할 수 있지만 새로운 교정 기록 결과를 생성할 수는 없습니다.\n" "그래도 교정을 계속하시겠습니까?" #, c-format, boost-format msgid "Only one of the results with the same name: %s will be saved. Are you sure you want to override the other results?" msgstr "이름이 같은 결과 중 %s 하나만 저장됩니다. 다른 결과를 재정의하시겠습니까?" #, c-format, boost-format msgid "There is already a previous calibration result with the same name: %s. Only one result with a name is saved. Are you sure you want to overwrite the previous result?" msgstr "동일한 이름을 가진 기록 교정 결과가 이미 있습니다: %s. 동일한 이름의 결과 중 하나만 저장됩니다. 과거 결과를 재정의하시겠습니까?" #, c-format, boost-format msgid "" "Within the same extruder, the name(%s) must be unique when the filament type, nozzle diameter, and nozzle flow are the same.\n" "Are you sure you want to override the historical result?" msgstr "" "동일한 압출기 내에서 필라멘트 유형, 노즐 직경 및 노즐 흐름이 동일한 경우 이름(%s)은 고유해야 합니다.\n" "과거 결과를 재정의하시겠습니까?" #, c-format, boost-format msgid "This machine type can only hold %d historical results per nozzle. This result will not be saved." msgstr "이 기계 유형은 노즐당 %d개의 기록 결과만 보유할 수 있습니다. 이 결과는 저장되지 않습니다." msgid "Connecting to printer..." msgstr "프린터에 연결하는 중..." msgid "The failed test result has been dropped." msgstr "실패한 테스트 결과가 삭제되었습니다." msgid "Flow Dynamics Calibration result has been saved to the printer." msgstr "동적 압출량 교정 결과가 프린터에 저장되었습니다" msgid "Internal Error" msgstr "내부 오류" msgid "Please select at least one filament for calibration" msgstr "교정을 위해 하나 이상의 필라멘트를 선택하세요" msgid "Flow rate calibration result has been saved to preset." msgstr "압출량 교정 결과가 사전 설정에 저장되었습니다" msgid "Max volumetric speed calibration result has been saved to preset." msgstr "최대 압출 속도 교정 결과가 사전 설정에 저장되었습니다" msgid "When do you need Flow Dynamics Calibration" msgstr "동적 압출량 교정이 필요한 경우" # AI Translated msgid "" "We now have added the auto-calibration for different filaments, which is fully automated and the result will be saved into the printer for future use. You only need to do the calibration in the following limited cases:\n" "1. If you introduce a new filament of different brands/models or the filament is damp;\n" "2. If the nozzle is worn out or replaced with a new one;\n" "3. If the max volumetric speed or print temperature is changed in the filament setting." msgstr "" "이제 다양한 필라멘트에 대한 자동 교정 기능이 추가되었습니다. 완전히 자동으로 수행되며 결과는 나중에 사용할 수 있도록 프린터에 저장됩니다. 다음과 같은 제한된 경우에만 교정을 수행하면 됩니다:\n" "1. 다른 브랜드/모델의 새 필라멘트를 사용하거나 필라멘트가 눅눅해진 경우\n" "2. 노즐이 마모되었거나 새 노즐로 교체한 경우\n" "3. 필라멘트 설정에서 최대 압출 속도나 출력 온도를 변경한 경우." msgid "About this calibration" msgstr "교정 정보" msgid "" "Please find the details of Flow Dynamics Calibration from our wiki.\n" "\n" "Usually the calibration is unnecessary. When you start a single color/material print, with the \"flow dynamics calibration\" option checked in the print start menu, the printer will follow the old way, calibrate the filament before the print; When you start a multi color/material print, the printer will use the default compensation parameter for the filament during every filament switch which will have a good result in most cases.\n" "\n" "Please note that there are a few cases that can make the calibration results unreliable, such as insufficient adhesion on the build plate. Improving adhesion can be achieved by washing the build plate or applying glue. For more information on this topic, please refer to our Wiki.\n" "\n" "The calibration results have about 10 percent jitter in our test, which may cause the result not exactly the same in each calibration. We are still investigating the root cause to do improvements with new updates." msgstr "" "우리 위키에서 동적 압출량 교정에 대한 자세한 내용을 찾아보세요.\n" "\n" "일반적으로 교정은 필요하지 않습니다. 출력 시작 메뉴에서 \"동적 압출량 교정\" 옵션을 선택한 상태에서 단일 색상/재료 출력을 시작하면 프린터는 이전 방식을 따르며 출력 전에 필라멘트를 교정합니다. 다중 색상/재료 출력을 시작하면 프린터는 모든 필라멘트 전환 중에 필라멘트에 대한 기본 보상 매개변수를 사용하므로 대부분의 경우 좋은 결과를 얻을 수 있습니다.\n" "\n" "교정 결과를 신뢰할 수 없게 만드는 몇 가지 경우가 있습니다. 텍스처 플레이트를 사용하여 보정을 수행합니다. 빌드 플레이트의 접착력이 좋지 않습니다. (빌드 플레이트를 세척하거나 풀을 바르십시오!) ...위키에서 자세한 내용을 확인할 수 있습니다.\n" "\n" "테스트에서 교정 결과에는 약 10%의 오차가 있으며, 이로 인해 각 교정에서 결과가 정확히 동일하지 않을 수 있습니다. 새로운 업데이트로 개선하기 위해 근본 원인을 계속 조사하고 있습니다." msgid "When to use Flow Rate Calibration" msgstr "압출량 교정을 사용해야 하는 경우" msgid "" "After using Flow Dynamics Calibration, there might still be some extrusion issues, such as:\n" "1. Over-Extrusion: Excess material on your printed object, forming blobs or zits, or the layers seem thicker than expected and not uniform\n" "2. Under-Extrusion: Very thin layers, weak infill strength, or gaps in the top layer of the model, even when printing slowly\n" "3. Poor Surface Quality: The surface of your prints seems rough or uneven\n" "4. Weak Structural Integrity: Prints break easily or don't seem as sturdy as they should be" msgstr "" "동적 압출량 교정을 사용한 후에도 다음과 같은 압출 문제가 여전히 발생할 수 있습니다.\n" "1. 과다 압출: 출력된 객체에 재료가 너무 많아 얼룩이나 잡티가 형성되거나 레이어가 예상보다 두껍고 균일하지 않은 것처럼 보입니다.\n" "2. 과소 압출: 레이어가 매우 얇거나 충전 강도가 약하거나 천천히 출력할 때에도 모델 상단 레이어에 틈이 있습니다.\n" "3. 표면 품질 불량: 출력물의 표면이 거칠거나 울퉁불퉁해 보입니다.\n" "4. 약한 구조적 완전성: 출력물이 쉽게 부러지거나 예상만큼 튼튼해 보이지 않습니다." msgid "In addition, Flow Rate Calibration is crucial for foaming materials like LW-PLA used in RC planes. These materials expand greatly when heated, and calibration provides a useful reference flow rate." msgstr "또한 RC 비행기에 사용되는 LW-PLA와 같은 발포 재료에는 압출량 교정이 중요합니다. 이러한 물질은 가열되면 크게 팽창하며 교정은 유용한 기준 압출량을 제공합니다." msgid "Flow Rate Calibration measures the ratio of expected to actual extrusion volumes. The default setting works well in Bambu Lab printers and official filaments as they were pre-calibrated and fine-tuned. For a regular filament, you usually won't need to perform a Flow Rate Calibration unless you still see the listed defects after you have done other calibrations. For more details, please check out the wiki article." msgstr "압출량 교정은 예상되는 압출량과 실제 압출량의 비율을 측정합니다. 기본 설정은 사전 보정되고 미세 조정된 뱀부랩 프린터 및 공식 필라멘트에서 잘 작동합니다. 일반 필라멘트의 경우 일반적으로 다른 교정을 수행한 후에도 나열된 결함이 표시되지 않는 한 압출량 교정을 수행할 필요가 없습니다. 자세한 내용은 위키를 확인하시기 바랍니다." msgid "" "Auto Flow Rate Calibration utilizes Bambu Lab's Micro-Lidar technology, directly measuring the calibration patterns. However, please be advised that the efficacy and accuracy of this method may be compromised with specific types of materials. Particularly, filaments that are transparent or semi-transparent, have sparkles, or have a highly-reflective finish may not be suitable for this calibration and can produce less-than-desirable results.\n" "\n" "The calibration results may vary between each calibration or filament. We are still improving the accuracy and compatibility of this calibration through firmware updates over time.\n" "\n" "Caution: Flow Rate Calibration is an advanced process, to be attempted only by those who fully understand its purpose and implications. Incorrect usage can lead to sub-par prints or printer damage. Please make sure to carefully read and understand the process before doing it." msgstr "" "자동 압출량 교정은 뱀부랩의 마이크로 라이다 기술을 활용하여 교정 패턴을 직접 측정합니다. 그러나 특정 유형의 재료를 사용하면 이 방법의 효율성과 정확성이 저하될 수 있다는 점에 유의하시기 바랍니다. 특히, 투명 또는 반투명, 반짝이는 입자 또는 고반사 마감 처리된 필라멘트는 이 교정에 적합하지 않을 수 있으며 바람직하지 않은 결과를 생성할 수 있습니다.\n" "\n" "교정 결과는 각 교정 또는 필라멘트마다 다를 수 있습니다. 우리는 시간이 지남에 따라 펌웨어 업데이트를 통해 이 교정의 정확성과 호환성을 계속 개선하고 있습니다.\n" "\n" "주의: 압출량 교정은 목적과 의미를 완전히 이해하는 사람만이 시도할 수 있는 고급 프로세스입니다. 잘못 사용하면 수준 이하의 출력이나 프린터 손상이 발생할 수 있습니다. 반드시 절차를 주의 깊게 읽고 이해하신 후 진행하시기 바랍니다." msgid "When you need Max Volumetric Speed Calibration" msgstr "최대 압출 속도 교정이 필요한 경우" msgid "Over-extrusion or under extrusion" msgstr "과다 압출 또는 과소 압출" msgid "Max Volumetric Speed calibration is recommended when you print with:" msgstr "다음을 사용하여 출력할 때 최대 압출 속도 교정을 권장합니다:" msgid "material with significant thermal shrinkage/expansion, such as..." msgstr "열 수축/팽창이 심한 재료, 다음과 같은..." msgid "materials with inaccurate filament diameter" msgstr "필라멘트 직경이 부정확한 재료" msgid "We found the best Flow Dynamics Calibration Factor" msgstr "최고의 동적 압출량 교정 계수를 찾았습니다" msgid "Part of the calibration failed! You may clean the plate and retry. The failed test result would be dropped." msgstr "교정의 일부가 실패했습니다! 플레이트를 청소하고 다시 시도할 수 있습니다. 실패한 테스트 결과는 삭제됩니다." msgid "*We recommend you to add brand, materia, type, and even humidity level in the Name" msgstr "*이름에 브랜드, 재질, 유형, 습도까지 추가하는 것이 좋습니다" msgid "Please enter the name you want to save to printer." msgstr "프린터에 저장할 이름을 입력하세요." msgid "The name cannot exceed 40 characters." msgstr "이름은 40자를 초과할 수 없습니다." msgid "Nozzle ID" msgstr "노즐 ID" msgid "Standard Flow" msgstr "표준 유량" msgid "Please find the best line on your plate" msgstr "당신의 플레이트에서 가장 좋은 선을 찾아보세요" msgid "Please find the corner with the perfect degree of extrusion" msgstr "완벽한 돌출 정도를 가진 코너를 찾아주세요." msgid "Input Value" msgstr "입력값" msgid "Save to Filament Preset" msgstr "필라멘트 사전 설정에 저장" msgid "Record Factor" msgstr "계수 기록" msgid "We found the best flow ratio for you" msgstr "당신에게 가장 적합한 압출량 비율을 찾았습니다" msgid "Flow Ratio" msgstr "압출량 비율" msgid "Please input a valid value (0.0 < flow ratio < 2.0)" msgstr "유효한 값을 입력하세요(0.0 < 압출량비율 < 2.0)" msgid "Please enter the name of the preset you want to save." msgstr "저장하고 싶은 사전 설정의 이름을 입력해주세요." msgid "Calibration1" msgstr "교정1" msgid "Calibration2" msgstr "교정2" msgid "Please find the best object on your plate" msgstr "당신의 플레이트에서 가장 좋은 객체를 찾아보세요" msgid "Fill in the value above the block with smoothest top surface" msgstr "가장 매끄러운 윗면을 가진 블록 위의 값을 입력하세요" msgid "Skip Calibration2" msgstr "교정2 건너뛰기" #, c-format, boost-format msgid "flow ratio : %s " msgstr "압출량 비율 : %s " msgid "Please choose a block with smoothest top surface." msgstr "상단 표면이 가장 매끄러운 블록을 선택하세요." msgid "Please input a valid value (0 <= Max Volumetric Speed <= 60)" msgstr "유효한 값을 입력하세요(0 <= 최대 압출 속도 <= 60)" msgid "Calibration Type" msgstr "교정 유형" msgid "Complete Calibration" msgstr "교정 완료" msgid "Fine Calibration based on flow ratio" msgstr "압출량비율에 따른 미세 교정" msgid "Title" msgstr "제목" msgid "A test model will be printed. Please clear the build plate and place it back to the hot bed before calibration." msgstr "테스트 모델이 출력됩니다. 교정 전에 빌드 플레이트를 청소하고 히트 베드에 다시 올려놓으십시오." msgid "Printing Parameters" msgstr "출력 매개변수" msgid "- ℃" msgstr "- ℃" msgid "Synchronize nozzle and AMS information" msgstr "노즐 및 AMS 정보 동기화" msgid "Please connect the printer first before synchronizing." msgstr "동기화하기 전에 먼저 프린터를 연결하세요." #, c-format, boost-format msgid "Printer %s nozzle information has not been set. Please configure it before proceeding with the calibration." msgstr "프린터 %s 노즐 정보가 설정되지 않았습니다. 보정을 진행하기 전에 구성해 주세요." msgid "AMS and nozzle information are synced" msgstr "AMS와 노즐 정보가 동기화되었습니다." msgid "Nozzle Flow" msgstr "노즐 흐름" msgid "Filament position" msgstr "필라멘트 위치" msgid "Filament For Calibration" msgstr "교정할 필라멘트" msgid "" "Tips for calibration material:\n" "- Materials that can share same hot bed temperature\n" "- Different filament brand and family (Brand = Bambu, Family = Basic, Matte)" msgstr "" "교정 재료에 대한 팁:\n" "- 동일한 히트베드 온도를 공유할 수 있는 소재\n" "- 다양한 필라멘트 브랜드 및 제품군(브랜드 = 뱀부, 제품군 = 기본, 메트)" msgid "Pattern" msgstr "패턴" msgid "Method" msgstr "방법" #, c-format, boost-format msgid "%s is not compatible with %s" msgstr "%s은(는) %s과(와) 호환되지 않습니다" msgid "TPU is not supported for Flow Dynamics Auto-Calibration." msgstr "TPU는 동적 압출량 자동 교정에서 지원되지 않습니다." # AI Translated msgid "Selected nozzle temperatures are incompatible. For multi-material printing, each filament's nozzle temperature must be within the recommended nozzle temperature range of the other filaments. Otherwise, nozzle clogging or printer damage may occur." msgstr "선택한 노즐 온도가 서로 호환되지 않습니다. 다중 재료 출력에서는 각 필라멘트의 노즐 온도가 다른 필라멘트의 권장 노즐 온도 범위 안에 있어야 합니다. 그렇지 않으면 노즐 막힘이나 프린터 손상이 발생할 수 있습니다." msgid "Sync AMS and nozzle information" msgstr "AMS와 노즐 정보 동기화" msgid "Calibration only supports cases where the left and right nozzle diameters are identical." msgstr "보정은 왼쪽과 오른쪽 노즐 직경이 동일한 경우에만 지원됩니다." msgid "From k Value" msgstr "K 값에서" msgid "To k Value" msgstr "K 값으로" msgid "Step value" msgstr "단계 값" msgid "The nozzle diameter has been synchronized from the printer Settings" msgstr "노즐 직경이 프린터 설정에서 동기화되었습니다" msgid "From Volumetric Speed" msgstr "압출 속도에서" msgid "To Volumetric Speed" msgstr "압출 속도로" msgid "Are you sure you want to cancel this print?" msgstr "이 출력을 취소하겠습니까?" msgid "Flow Dynamics Calibration Result" msgstr "동적 압출량 교정 결과" msgid "New" msgstr "새로운" msgid "No History Result" msgstr "기록 결과 없음" msgid "Success to get history result" msgstr "기록 결과 가져오기 성공" msgid "Refreshing the previous Flow Dynamics Calibration records" msgstr "과거 동적 압출량 교정 기록 새로 고침" #, c-format, boost-format msgid "Note: The hotend number on the %s is tied to the holder. When the hotend is moved to a new holder, its number will update automatically." msgstr "참고: %s의 핫엔드 번호는 홀더에 연결되어 있습니다. 핫엔드를 새 홀더로 옮기면 번호가 자동으로 업데이트됩니다." msgid "Action" msgstr "실행" #, c-format, boost-format msgid "This machine type can only hold %d historical results per nozzle." msgstr "이 기계 유형은 노즐당 %d개의 기록 결과만 보유할 수 있습니다." msgid "Edit Flow Dynamics Calibration" msgstr "동적 압출량 교정 편집" #, c-format, boost-format msgid "Within the same extruder, the name '%s' must be unique when the filament type, nozzle diameter, and nozzle flow are identical. Please choose a different name." msgstr "동일한 압출기 내에서 필라멘트 유형, 노즐 직경 및 노즐 흐름이 동일한 경우 '%s'라는 이름은 고유해야 합니다. 다른 이름을 선택해 주세요." msgid "New Flow Dynamic Calibration" msgstr "새로운 압출량 동적 교정" msgid "The filament must be selected." msgstr "필라멘트를 선택해야 합니다." msgid "The extruder must be selected." msgstr "압출기를 선택해야 합니다." msgid "The nozzle must be selected." msgstr "노즐을 선택해야 합니다." msgid "Network lookup" msgstr "네트워크 검색" msgid "Address" msgstr "주소" msgid "Hostname" msgstr "호스트 이름" msgid "Service name" msgstr "서비스 이름" msgid "OctoPrint version" msgstr "OctoPrint 버전" msgid "Searching for devices" msgstr "장치 검색 중" msgid "Finished" msgstr "완료됨" msgid "Multiple resolved IP addresses" msgstr "확인된 다수의 IP 주소" #, boost-format msgid "" "There are several IP addresses resolving to hostname %1%.\n" "Please select one that should be used." msgstr "" "호스트 이름 %1%으로 확인되는 IP 주소가 여러 개 있습니다.\n" "사용 할 IP를 선택해 주세요." # AI Translated msgid "Auto-scale for nozzle" msgstr "노즐에 맞춰 자동 크기 조정" # AI Translated msgid "" "This model is designed around a 0.4 mm nozzle with a 0.2 mm layer height. \n" "When the scaling option is enabled (recommended), it dynamically resizes to match your current nozzle diameter and an appropriate layer height, making the test both accurate and easy to read.\n" "Turn scaling off only if you wish to print the reference model exactly as-is." msgstr "" "이 모델은 0.4 mm 노즐과 0.2 mm 레이어 높이를 기준으로 설계되었습니다. \n" "크기 조정 옵션을 활성화하면(권장) 현재 노즐 직경과 적절한 레이어 높이에 맞춰 크기가 동적으로 조정되어 테스트가 정확하고 읽기 쉬워집니다.\n" "참조 모델을 있는 그대로 출력하려는 경우에만 크기 조정을 끄십시오." msgid "PA Calibration" msgstr "PA 교정" msgid "Extruder type" msgstr "압출기 타입" msgid "DDE" msgstr "다이렉트" msgid "PA Tower" msgstr "PA 타워" msgid "PA Line" msgstr "PA 선" msgid "PA Pattern" msgstr "PA 패턴" msgid "Start PA: " msgstr "시작 PA: " msgid "End PA: " msgstr "종료 PA: " msgid "PA step: " msgstr "PA 단계: " msgid "Accelerations: " msgstr "가속: " msgid "Speeds: " msgstr "속도: " msgid "Print numbers" msgstr "출력 수" msgid "Comma-separated list of printing accelerations" msgstr "쉼표로 구분된 출력 가속 목록" msgid "Comma-separated list of printing speeds" msgstr "쉼표로 구분된 출력 속도 목록" msgid "" "Please input valid values:\n" "Start PA: >= 0.0\n" "End PA: > Start PA\n" "PA step: >= 0.001" msgstr "" "유효한 값을 입력하세요:\n" "PA 시작: >= 0.0\n" "PA 종료: > PA 시작\n" "PA 단계: >= 0.001)" # AI Translated msgid "" "Acceleration values must be greater than speed values.\n" "Please verify the inputs." msgstr "" "가속도 값은 속도 값보다 커야 합니다.\n" "입력값을 확인하십시오." msgid "Temperature calibration" msgstr "온도 교정" msgid "Filament type" msgstr "필라멘트 유형" msgid "PLA" msgstr "PLA" msgid "ABS/ASA" msgstr "ABS/ASA" msgid "PETG" msgstr "PETG" msgid "PCTG" msgstr "PCTG" msgid "TPU" msgstr "TPU" msgid "PA-CF" msgstr "PA-CF" msgid "PET-CF" msgstr "PET-CF" msgid "Start temp: " msgstr "시작 온도: " msgid "End temp: " msgstr "종료 온도: " msgid "Temp step: " msgstr "온도 단계: " # AI Translated msgid "" "Please input valid values:\n" "Start temp: <= 500\n" "End temp: >= 155\n" "Start temp >= End temp + 5" msgstr "" "유효한 값을 입력하십시오:\n" "시작 온도: <= 500\n" "종료 온도: >= 155\n" "시작 온도 >= 종료 온도 + 5" msgid "Max volumetric speed test" msgstr "최대 압출 속도 테스트" msgid "Start volumetric speed: " msgstr "시작 압출 속도: " msgid "End volumetric speed: " msgstr "종료 압출 속도: " msgid "" "Please input valid values:\n" "start > 0\n" "step >= 0\n" "end > start + step" msgstr "" "유효한 값을 입력하세요:\n" "시작 > 0\n" "단계 >= 0\n" "끝 > 시작 + 단계)" msgid "VFA test" msgstr "VFA 테스트" msgid "Start speed: " msgstr "시작 속도: " msgid "End speed: " msgstr "종료 속도: " # AI Translated msgid "Auto-adjust to max volumetric speed" msgstr "최대 압출 속도에 맞춰 자동 조정" # AI Translated msgid "If the end speed would exceed the filament's maximum volumetric speed, automatically lower the layer height (keeping standard values and staying within the machine's limits) to reach it. If even the minimum layer height is not enough, lower the end speed instead." msgstr "종료 속도가 필라멘트의 최대 압출 속도를 초과하는 경우, 해당 속도에 도달할 수 있도록 레이어 높이를 자동으로 낮춥니다(표준 값을 유지하고 장비의 한계 내에서 조정). 최소 레이어 높이로도 부족하면 대신 종료 속도를 낮춥니다." msgid "" "Please input valid values:\n" "start > 10\n" "step >= 0\n" "end > start + step" msgstr "" "유효한 값을 입력하세요:\n" "시작 > 10\n" "단계 >= 0\n" "끝 > 시작 + 단계)" # AI Translated #, c-format, boost-format msgid "" "The end speed (%.0f mm/s) exceeds the filament's maximum volumetric speed (%.1f mm³/s), which limits the outer wall to about %.0f mm/s at this line width and layer height.\n" " Speeds above this will be clamped, so the upper blocks of the tower will not print at the requested speed.\n" "\n" "%s" msgstr "" "종료 속도(%.0f mm/s)가 필라멘트의 최대 압출 속도(%.1f mm³/s)를 초과합니다. 현재 선 너비와 레이어 높이에서는 외벽이 약 %.0f mm/s로 제한됩니다.\n" " 이보다 빠른 속도는 제한되므로 타워의 상단 블록은 요청한 속도로 출력되지 않습니다.\n" "\n" "%s" # AI Translated #, c-format, boost-format msgid "" "The end speed (%.0f mm/s) exceeds the filament's maximum volumetric speed (%.1f mm³/s) at the default layer height (%.2f mm).\n" "\n" "The layer height has been reduced to %.2f mm (a value used by this printer's profiles) so the tower can reach the requested speed." msgstr "" "종료 속도(%.0f mm/s)가 필라멘트의 최대 압출 속도(%.1f mm³/s)를 초과합니다(기본 레이어 높이 %.2f mm 기준).\n" "\n" "타워가 요청한 속도에 도달할 수 있도록 레이어 높이를 %.2f mm(이 프린터의 프로파일에서 사용하는 값)로 낮췄습니다." # AI Translated #, c-format, boost-format msgid "" "Even at the smallest layer height used by this printer's profiles (%.2f mm) the end speed (%.0f mm/s) exceeds the filament's maximum volumetric speed (%.1f mm³/s).\n" "\n" "The layer height will be set to %.2f mm and the end speed lowered to %.0f mm/s.\n" "\n" "Continue?" msgstr "" "이 프린터의 프로파일에서 사용하는 가장 작은 레이어 높이(%.2f mm)에서도 종료 속도(%.0f mm/s)가 필라멘트의 최대 압출 속도(%.1f mm³/s)를 초과합니다.\n" "\n" "레이어 높이를 %.2f mm로 설정하고 종료 속도를 %.0f mm/s로 낮춥니다.\n" "\n" "계속하시겠습니까?" # AI Translated msgid "Continue anyway?" msgstr "그래도 계속하시겠습니까?" # AI Translated msgid "Enable \"Auto-adjust\" to fix this automatically, or continue anyway?" msgstr "\"자동 조정\"을 활성화하면 자동으로 해결됩니다. 그래도 계속하시겠습니까?" # AI Translated msgid "Enable \"Auto-scale for nozzle\" and \"Auto-adjust\" to fix this automatically, or continue anyway?" msgstr "\"노즐에 맞춰 자동 크기 조정\"과 \"자동 조정\"을 활성화하면 자동으로 해결됩니다. 그래도 계속하시겠습니까?" msgid "Start retraction length: " msgstr "후퇴 시작 길이: " msgid "End retraction length: " msgstr "후퇴 종료 길이: " # AI Translated msgid "Input shaping Frequency test" msgstr "인풋 셰이핑 주파수 테스트" # AI Translated msgid "Test model" msgstr "테스트 모델" # AI Translated msgid "Ringing Tower" msgstr "링잉 타워" # AI Translated msgid "Fast Tower" msgstr "고속 타워" # AI Translated msgid "Please ensure the selected type is compatible with your firmware version." msgstr "선택한 유형이 펌웨어 버전과 호환되는지 확인하십시오." # AI Translated msgid "" "Marlin version => 2.1.2\n" "Fixed-Time motion not yet implemented." msgstr "" "Marlin 버전 => 2.1.2\n" "Fixed-Time 모션은 아직 구현되지 않았습니다." # AI Translated msgid "Klipper version => 0.9.0" msgstr "Klipper 버전 => 0.9.0" # AI Translated msgid "" "RepRap firmware version => 3.4.0\n" "Check your firmware documentation for supported shaper types." msgstr "" "RepRap 펌웨어 버전 => 3.4.0\n" "지원되는 셰이퍼 유형은 펌웨어 문서를 확인하십시오." # AI Translated msgid "Frequency (Start / End): " msgstr "주파수 (시작 / 종료): " # AI Translated msgid "Start / End" msgstr "시작 / 종료" # AI Translated msgid "Frequency settings" msgstr "주파수 설정" # AI Translated msgid "RepRap firmware uses the same frequency range for both axes." msgstr "RepRap 펌웨어는 두 축에 동일한 주파수 범위를 사용합니다." # AI Translated msgid "Damp: " msgstr "감쇠: " # AI Translated msgid "" "Recommended: Set Damp to 0.\n" "This will use the printer's default or saved value." msgstr "" "권장: 감쇠를 0으로 설정하십시오.\n" "프린터의 기본값 또는 저장된 값이 사용됩니다." # AI Translated msgid "" "Please input valid values:\n" "(0 < FreqStart < FreqEnd < 500)" msgstr "" "유효한 값을 입력하십시오:\n" "(0 < FreqStart < FreqEnd < 500)" # AI Translated msgid "Please input a valid damping factor (0 < Damping/zeta factor <= 1)" msgstr "유효한 감쇠 계수를 입력하십시오 (0 < Damping/zeta factor <= 1)" # AI Translated msgid "Input shaping Damp test" msgstr "인풋 셰이핑 감쇠 테스트" # AI Translated msgid "Check firmware compatibility." msgstr "펌웨어 호환성을 확인하십시오." # AI Translated msgid "Frequency: " msgstr "주파수: " # AI Translated msgid "Damp" msgstr "감쇠" # AI Translated msgid "RepRap firmware uses the same frequency for both axes." msgstr "RepRap 펌웨어는 두 축에 동일한 주파수를 사용합니다." # AI Translated msgid "Note: Use previously calculated frequencies." msgstr "참고: 이전에 계산된 주파수를 사용하십시오." # AI Translated msgid "" "Please input valid values:\n" "(0 < Freq < 500)" msgstr "" "유효한 값을 입력하십시오:\n" "(0 < Freq < 500)" # AI Translated msgid "Please input a valid damping factor (0 <= DampingStart < DampingEnd <= 1)" msgstr "유효한 감쇠 계수를 입력하십시오 (0 <= DampingStart < DampingEnd <= 1)" # AI Translated msgid "Cornering test" msgstr "코너링 테스트" msgid "SCV-V2" msgstr "SCV-V2" # AI Translated msgid "Start: " msgstr "시작: " # AI Translated msgid "End: " msgstr "종료: " # AI Translated msgid "Cornering settings" msgstr "코너링 설정" # AI Translated msgid "Note: Lower values = sharper corners but slower speeds." msgstr "참고: 값이 낮을수록 모서리는 날카로워지지만 속도는 느려집니다." # AI Translated msgid "" "Marlin 2 Junction Deviation detected:\n" "To test Classic Jerk, set 'Maximum Junction Deviation' in Motion ability to 0." msgstr "" "Marlin 2 Junction Deviation이 감지되었습니다:\n" "Classic Jerk를 테스트하려면 모션 성능의 '최대 Junction Deviation'을 0으로 설정하십시오." # AI Translated msgid "" "Marlin 2 Classic Jerk detected:\n" "To test Junction Deviation, set 'Maximum Junction Deviation' in Motion ability to a value > 0." msgstr "" "Marlin 2 Classic Jerk가 감지되었습니다:\n" "Junction Deviation을 테스트하려면 모션 성능의 '최대 Junction Deviation'을 0보다 큰 값으로 설정하십시오." # AI Translated msgid "" "RepRap detected: Jerk in mm/s.\n" "OrcaSlicer will convert the values to mm/min when necessary." msgstr "" "RepRap이 감지되었습니다: Jerk 단위는 mm/s입니다.\n" "OrcaSlicer가 필요할 때 값을 mm/min으로 변환합니다." # AI Translated #, c-format, boost-format msgid "" "Please input valid values:\n" "(0 <= Cornering <= %s)" msgstr "" "유효한 값을 입력하십시오:\n" "(0 <= Cornering <= %s)" # AI Translated #, c-format, boost-format msgid "NOTE: High values may cause Layer shift (>%s)" msgstr "참고: 값이 크면 레이어 밀림이 발생할 수 있습니다 (>%s)" # AI Translated msgid "Flow Ratio Calibration" msgstr "압출량 비율 교정" # AI Translated msgid "Calibration Test Type" msgstr "교정 테스트 유형" # AI Translated msgid "Pass 1 (Coarse)" msgstr "1차 (개략)" # AI Translated msgid "Pass 2 (Fine)" msgstr "2차 (정밀)" msgid "YOLO (Recommended)" msgstr "YOLO (권장)" # AI Translated msgid "YOLO (Perfectionist)" msgstr "YOLO (완벽주의자)" # AI Translated msgid "Top Surface Pattern" msgstr "상단 표면 패턴" # AI Translated msgid "Choose a slot for the selected color" msgstr "선택한 색상에 사용할 슬롯을 선택하십시오" # AI Translated msgid "Material in the material station" msgstr "재료 스테이션의 재료" # AI Translated msgid "Only materials of the same type can be selected." msgstr "같은 유형의 재료만 선택할 수 있습니다." msgid "Send G-code to printer host" msgstr "Gcode를 프린터 호스트로 보내기" msgid "Upload to Printer Host with the following filename:" msgstr "다음 파일 이름으로 프린터 호스트에 업로드:" msgid "Use forward slashes ( / ) as a directory separator if needed." msgstr "필요한 경우 슬래시( / )를 디렉토리 구분 기호로 사용하세요." msgid "Upload to storage" msgstr "저장소에 업로드" msgid "Switch to Device tab after upload." msgstr "업로드 후 기기 탭으로 전환." #, c-format, boost-format msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?" msgstr "업로드 파일 이름이 \"%s\"로 끝나지 않습니다. 계속하시겠습니까?" msgid "Upload" msgstr "업로드" # AI Translated msgid "Leveling before print" msgstr "출력 전 레벨링" msgid "Time-lapse" msgstr "타임랩스" # AI Translated msgid "Enable IFS" msgstr "IFS 활성화" # AI Translated #, c-format, boost-format msgid "Detected %d IFS slots on printer." msgstr "프린터에서 %d개의 IFS 슬롯을 감지했습니다." # AI Translated msgid "This printer does not report a material station." msgstr "이 프린터는 재료 스테이션을 보고하지 않습니다." # AI Translated msgid "Unable to read IFS slots from printer." msgstr "프린터에서 IFS 슬롯을 읽을 수 없습니다." # AI Translated msgid "Loading IFS slots from printer..." msgstr "프린터에서 IFS 슬롯을 불러오는 중..." # AI Translated msgid "Slice the plate first to get project material information." msgstr "프로젝트 재료 정보를 얻으려면 먼저 플레이트를 슬라이스하십시오." # AI Translated msgid "This plate uses multiple materials. Enable IFS and assign each tool to a printer slot." msgstr "이 플레이트는 여러 재료를 사용합니다. IFS를 활성화하고 각 툴을 프린터 슬롯에 할당하십시오." # AI Translated msgid "Each project material must be assigned to an IFS slot before printing." msgstr "출력하기 전에 각 프로젝트 재료를 IFS 슬롯에 할당해야 합니다." # AI Translated msgid "Each project material must be assigned to a loaded IFS slot before printing." msgstr "출력하기 전에 각 프로젝트 재료를 재료가 로드된 IFS 슬롯에 할당해야 합니다." # AI Translated msgid "Each project material must match the material loaded in the selected IFS slot." msgstr "각 프로젝트 재료는 선택한 IFS 슬롯에 로드된 재료와 일치해야 합니다." msgid "Print host upload queue" msgstr "출력 호스트 업로드 대기열" msgid "ID" msgstr "아이디" msgid "Progress" msgstr "진행 상황" msgid "Host" msgstr "호스트" msgctxt "OfFile" msgid "Size" msgstr "크기" msgid "Filename" msgstr "파일 이름" msgid "Cancel selected" msgstr "선택 취소" msgid "Show error message" msgstr "오류 메시지 표시" msgid "Queued" msgstr "대기 중" msgid "Uploading" msgstr "업로드 중" msgid "Canceling" msgstr "취소 중" msgid "Error uploading to print host" msgstr "출력 호스트에 업로드하는 중 오류가 발생했습니다" msgid "The selected bed type does not match the file. Please confirm before starting the print." msgstr "선택한 베드 유형이 파일과 일치하지 않습니다. 출력을 시작하기 전에 확인해 주세요." msgid "Heated Bed Leveling" msgstr "히트 베드 레벨링" msgid "Textured Build Plate (Side A)" msgstr "텍스처 빌드 플레이트(A면)" msgid "Smooth Build Plate (Side B)" msgstr "매끄러운 빌드 플레이트(B면)" # AI Translated #, c-format, boost-format msgid "Printer: %s" msgstr "프린터: %s" # AI Translated msgid "Calibrate before printing" msgstr "출력 전 교정" # AI Translated msgid "Filament Mapping:" msgstr "필라멘트 매핑:" msgid "Unable to perform boolean operation on selected parts" msgstr "선택한 부품에서 부울 연산을 수행할 수 없습니다" msgid "Mesh Boolean" msgstr "메시 합집합/차집합/교집합" msgid "Union" msgstr "합집합" msgid "Difference" msgstr "차집합" msgid "Intersection" msgstr "교집합" msgid "Source Volume" msgstr "소스 볼륨" msgid "Tool Volume" msgstr "도구 볼륨" msgid "Subtract from" msgstr "다음에서 잘라내기" msgid "Subtract with" msgstr "다음으로 잘라내기" msgid "selected" msgstr "선택됨" msgid "Part 1" msgstr "부품 1" msgid "Part 2" msgstr "부품 2" msgid "Delete input" msgstr "입력객체 삭제" msgid "Network Test" msgstr "네트워크 테스트" msgid "Start Test Multi-Thread" msgstr "멀티스레드 테스트 시작" msgid "Start Test Single-Thread" msgstr "단일 스레드 테스트 시작" msgid "Export Log" msgstr "로그 내보내기" msgid "OrcaSlicer Version:" msgstr "OrcaSlicer 버전:" msgid "System Version:" msgstr "시스템 버전:" msgid "DNS Server:" msgstr "DNS 서버:" msgid "Test OrcaSlicer (GitHub)" msgstr "OrcaSlicer 테스트(깃허브)" msgid "Test OrcaSlicer (GitHub):" msgstr "OrcaSlicer 테스트(깃허브):" msgid "Test bing.com" msgstr "테스트 Bing.com" msgid "Test bing.com:" msgstr "테스트 Bing.com:" msgid "Log Info" msgstr "로그 정보" msgid "Select filament preset" msgstr "필라멘트 사전 설정 선택" msgid "Create Filament" msgstr "필라멘트 생성" msgid "Create Based on Current Filament" msgstr "현재 필라멘트를 기반으로 생성" msgid "Copy Current Filament Preset " msgstr "현재 필라멘트 사전 설정 복사 " msgid "Basic Information" msgstr "기본 정보" msgid "Add Filament Preset under this filament" msgstr "이 필라멘트 아래에 필라멘트 사전 설정을 추가하세요" msgid "We could create the filament presets for your following printer:" msgstr "다음 프린터에 대한 필라멘트 사전 설정을 만들 수 있습니다:" msgid "Select Vendor" msgstr "공급업체 선택" msgid "Input Custom Vendor" msgstr "맞춤 공급업체 입력" msgid "Can't find vendor I want" msgstr "원하는 공급업체를 찾을 수 없습니다" msgid "Select Type" msgstr "유형 선택" msgid "Select Filament Preset" msgstr "필라멘트 사전 설정 선택" msgid "Serial" msgstr "시리얼" msgid "e.g. Basic, Matte, Silk, Marble" msgstr "예를 들어 기본, 매트, 실크, 마블" msgid "Filament Preset" msgstr "필라멘트 사전 설정" msgid "Create" msgstr "생성" msgid "Vendor is not selected; please reselect vendor." msgstr "공급업체가 선택되지 않았습니다. 공급업체를 다시 선택하세요." msgid "Custom vendor missing; please input custom vendor." msgstr "사용자 정의 공급업체가 입력되지 않았습니다. 사용자 정의 공급업체를 입력해 주세요." msgid "\"Bambu\" or \"Generic\" cannot be used as a Vendor for custom filaments." msgstr "\"뱀부\" 또는 \"일반적인\"은 맞춤형 필라멘트 공급업체로 사용할 수 없습니다." msgid "Filament type is not selected, please reselect type." msgstr "필라멘트 유형이 선택되지 않았습니다. 유형을 다시 선택하세요." msgid "Filament serial missing; please input serial." msgstr "필라멘트 시리얼이 입력되지 않았습니다. 시리얼을 입력해 주세요." # AI Translated msgid "There may be disallowed characters in the vendor or serial input of the filament. Please delete and re-enter." msgstr "공급업체 또는 필라멘트 시리얼 입력에 허용되지 않는 문자가 있을 수 있습니다. 삭제하고 다시 입력해주세요." msgid "All inputs in the custom vendor or serial are spaces. Please re-enter." msgstr "사용자 정의 공급업체 또는 일련번호의 모든 입력은 공백입니다. 다시 입력해 주세요." msgid "The vendor cannot be a number; please re-enter." msgstr "공급업체는 숫자가 될 수 없습니다. 다시 입력하세요." msgid "You have not selected a printer or preset yet. Please select at least one." msgstr "아직 프린터나 사전 설정을 선택하지 않았습니다. 하나 이상 선택하세요." #, c-format, boost-format msgid "" "The Filament name %s you created already exists.\n" "If you continue, the preset created will be displayed with its full name. Do you want to continue?" msgstr "" "생성한 필라멘트 이름 %s이(가) 이미 존재합니다.\n" "계속 생성하면 생성된 사전 설정이 전체 이름과 함께 표시됩니다. 계속하시겠습니까?" msgid "Some existing presets have failed to be created, as follows:\n" msgstr "다음과 같이 일부 기존 사전 설정을 생성하지 못했습니다.\n" msgid "" "\n" "Do you want to rewrite it?" msgstr "" "\n" "다시 작성하시겠습니까?" # AI Translated msgid "" "We would rename the presets as \"Vendor Type Serial @printer you selected\".\n" "To add preset for more printers, please go to printer selection" msgstr "" "사전 설정의 이름을 \"제조사 유형 일련번호 @선택한 프린터\" 형식으로 변경합니다.\n" "더 많은 프린터에 사전 설정을 추가하려면 프린터 선택으로 이동하십시오" msgid "Create Printer/Nozzle" msgstr "프린터/노즐 생성" msgid "Create Printer" msgstr "프린터 생성" msgid "Create Nozzle for Existing Printer" msgstr "기존 프린터용 노즐 생성" msgid "Create from Template" msgstr "템플릿에서 생성" msgid "Create Based on Current Printer" msgstr "현재 프린터를 기반으로 생성" msgid "Import Preset" msgstr "사전 설정 가져오기" msgid "Create Type" msgstr "유형 생성" msgid "The model was not found; please reselect vendor." msgstr "모델을 찾을 수 없습니다. 공급업체를 다시 선택하세요." msgid "Select Printer" msgstr "프린터 선택" msgid "Select Model" msgstr "모델 선택" msgid "Input Custom Model" msgstr "커스텀 모델 입력" msgid "Can't find my printer model" msgstr "내 프린터 모델을 찾을 수 없습니다" msgid "Input Custom Nozzle Diameter" msgstr "사용자 지정 노즐 직경 입력" msgid "Can't find my nozzle diameter" msgstr "노즐 직경을 찾을 수 없습니다" msgid "Printable Space" msgstr "출력 가능 공간" msgid "Hot Bed STL" msgstr "베드 STL" msgid "Hot Bed SVG" msgstr "베드 SVG" msgid "Max Print Height" msgstr "최대 출력 높이" #, c-format, boost-format msgid "The file exceeds %d MB, please import again." msgstr "파일이 %d MB를 초과합니다. 다시 가져오십시오." msgid "Exception in obtaining file size, please import again." msgstr "파일 크기를 가져오는 중 예외가 발생했습니다. 다시 가져오세요." msgid "Preset path was not found; please reselect vendor." msgstr "사전 설정 경로를 찾을 수 없습니다. 공급업체를 다시 선택하세요." msgid "The printer model was not found, please reselect." msgstr "프린터 모델을 찾을 수 없습니다. 다시 선택하세요." # AI Translated msgid "The nozzle diameter was not found; please reselect." msgstr "노즐 직경을 찾을 수 없습니다. 다시 선택하세요." # AI Translated msgid "The printer preset was not found; please reselect." msgstr "프린터 사전 설정을 찾을 수 없습니다. 다시 선택하세요." msgid "Printer Preset" msgstr "프린터 사전 설정" msgid "Filament Preset Template" msgstr "필라멘트 사전 설정 템플릿" msgid "Process Preset Template" msgstr "프로세스 사전 설정 템플릿" msgid "You have not yet chosen which printer preset to create based on. Please choose the vendor and model of the printer" msgstr "생성할 프린터 사전 설정을 아직 선택하지 않았습니다. 프린터의 공급업체와 모델을 선택하세요" # AI Translated msgid "You have entered a disallowed character in the printable area section on the first page. Please use only numbers." msgstr "첫 번째 페이지의 출력 가능 영역 섹션에 허용되지 않는 문자를 입력했습니다. 숫자만 사용해 주세요." # AI Translated msgid "" "The printer preset you created already has a preset with the same name. Do you want to overwrite it?\n" "\tYes: Overwrite the printer preset with the same name, and filament and process presets with the same preset name will be recreated \n" "and filament and process presets without the same preset name will be reserved.\n" "\tCancel: Do not create a preset; return to the creation interface." msgstr "" "생성한 프린터 사전 설정에 동일한 이름의 사전 설정이 이미 있습니다. 덮어쓰시겠습니까?\n" "\t예: 동일한 이름의 프린터 사전 설정을 덮어쓰고, 동일한 사전 설정 이름을 가진 필라멘트 및 프로세스 사전 설정이 다시 생성되며 \n" "동일한 사전 설정 이름이 없는 필라멘트 및 프로세스 사전 설정은 유지됩니다.\n" "\t취소: 사전 설정을 생성하지 않고 생성 화면으로 돌아갑니다." msgid "You need to select at least one filament preset." msgstr "필라멘트 사전 설정을 하나 이상 선택해야 합니다." msgid "You need to select at least one process preset." msgstr "프로세스 사전 설정을 하나 이상 선택해야 합니다." msgid "Create filament presets failed. As follows:\n" msgstr "필라멘트 사전 설정 생성에 실패했습니다. 다음과 같이:\n" msgid "Create process presets failed. As follows:\n" msgstr "프로세스 사전 설정 생성에 실패했습니다. 다음과 같이:\n" msgid "Vendor was not found; please reselect." msgstr "공급업체를 찾을 수 없습니다. 다시 선택하세요." msgid "Current vendor has no models, please reselect." msgstr "현재 공급업체에는 모델이 없습니다. 다시 선택하세요." msgid "You have not selected the vendor and model or input the custom vendor and model." msgstr "공급업체 및 모델을 선택하지 않았거나 맞춤 공급업체 및 모델을 입력하지 않았습니다." msgid "There may be escape characters in the custom printer vendor or model. Please delete and re-enter." msgstr "사용자 정의 프린터 공급업체 또는 모델에 이스케이프 문자가 있을 수 있습니다. 삭제하고 다시 입력해주세요." msgid "All inputs in the custom printer vendor or model are spaces. Please re-enter." msgstr "사용자 정의 프린터 공급업체 또는 모델의 모든 입력은 공백입니다. 다시 입력해 주세요." msgid "Please check bed printable shape and origin input." msgstr "출력 가능한 베드 형태를 확인해주세요." msgid "You have not yet selected the printer to replace the nozzle for; please choose a printer." msgstr "노즐을 교체할 프린터를 아직 선택하지 않으셨습니다. 선택해 주세요." msgid "The entered nozzle diameter is invalid, please re-enter:\n" msgstr "입력한 노즐 직경이 잘못되었습니다. 다시 입력해 주세요:\n" msgid "" "The system preset does not allow creation. \n" "Please re-enter the printer model or nozzle diameter." msgstr "" "시스템 프리셋으로 만들 수 없습니다.\n" "프린터 모델 또는 노즐 직경을 다시 입력하세요." # AI Translated msgid "" "\n" "\n" "Available nozzle profiles for this printer:" msgstr "" "\n" "\n" "이 프린터에 사용할 수 있는 노즐 프로필:" # AI Translated msgid "" "\n" "\n" "Choose YES to switch existing preset:" msgstr "" "\n" "\n" "기존 사전 설정을 전환하려면 예를 선택하십시오:" msgid "Printer Created Successfully" msgstr "프린터 생성 성공" msgid "Filament Created Successfully" msgstr "필라멘트 생성 성공" msgid "Printer Created" msgstr "프린터가 생성되었습니다" msgid "Please go to printer settings to edit your presets" msgstr "사전 설정을 편집하려면 프린터 설정으로 이동하세요" msgid "Filament Created" msgstr "필라멘트 생성됨" msgid "" "Please go to filament settings to edit your presets if you need to.\n" "Please note that nozzle temperature, hot bed temperature, and maximum volumetric speed each have a significant impact on printing quality. Please set them carefully." msgstr "" "필요한 경우 필라멘트 설정으로 이동하여 사전 설정을 편집하세요.\n" "노즐 온도, 핫베드 온도 및 최대 압출 속도는 출력 품질에 큰 영향을 미칩니다. 신중하게 설정해 주세요." msgid "" "\n" "\n" "Orca has detected that your user presets synchronization function is not enabled, which may result in unsuccessful Filament settings on the Device page.\n" "Click \"Sync user presets\" to enable the synchronization function." msgstr "" "\n" "\n" "Orca에서는 사용자 사전 설정 동기화 기능이 활성화되어 있지 않아 장치 페이지에서 필라멘트 설정이 실패할 수 있음을 감지했습니다.\n" "동기화 기능을 활성화하려면 \"사용자 사전 설정 동기화\"를 클릭하세요." msgid "Printer Setting" msgstr "프린터 설정" msgid "Printer config bundle(.orca_printer)" msgstr "프린터 구성 번들(.orca_printer)" msgid "Filament bundle(.orca_filament)" msgstr "필라멘트 번들(.orca_filament)" msgid "Printer presets(.zip)" msgstr "프린터 사전 설정(.zip)" msgid "Filament presets(.zip)" msgstr "필라멘트 사전 설정(.zip)" msgid "Process presets(.zip)" msgstr "프로세스 사전 설정(.ZIP)" msgid "initialize fail" msgstr "초기화 실패" msgid "add file fail" msgstr "파일 추가 실패" msgid "add bundle structure file fail" msgstr "번들 구조 파일 추가 실패" msgid "finalize fail" msgstr "마무리 실패" msgid "open zip written fail" msgstr "ZIP 열기 실패" msgid "Export successful" msgstr "내보내기 성공" #, c-format, boost-format msgid "" "The '%s' folder already exists in the current directory. Do you want to clear it and rebuild it?\n" "If not, a time suffix will be added, and you can modify the name after creation." msgstr "" "현재 디렉터리에 '%s' 폴더가 이미 존재합니다. 지우고 다시 작성하시겠습니까?\n" "그렇지 않은 경우 시간 접미사가 추가되며 생성 후 이름을 수정할 수 있습니다." # AI Translated #, c-format, boost-format msgid "" "The file: %s\n" "may have been opened by another program.\n" "Please close it and try again." msgstr "" "파일: %s\n" "이(가) 다른 프로그램에서 열려 있을 수 있습니다.\n" "해당 프로그램을 닫고 다시 시도하십시오." msgid "" "Printer and all the filament and process presets that belongs to the printer.\n" "Can be shared with others." msgstr "" "프린터와 프린터에 속한 모든 필라멘트 및 프로세스 사전 설정.\n" "다른 사람과 공유할 수 있습니다." msgid "" "User's filament preset set.\n" "Can be shared with others." msgstr "" "사용자의 필라멘트 사전 설정입니다.\n" "다른 사람과 공유할 수 있습니다." msgid "Only display printers with changes to printer, filament, and process presets are displayed." msgstr "프린터, 필라멘트 및 프로세스 사전 설정이 변경된 경우에만 프린터 이름을 표시합니다." msgid "Only display the filament names with changes to filament presets." msgstr "필라멘트 사전 설정이 변경된 경우에만 필라멘트 이름을 표시합니다." msgid "Only printer names with user printer presets will be displayed, and each preset you choose will be exported as a zip." msgstr "사용자 프린터 사전 설정이 있는 프린터 이름만 표시되며, 선택한 각 사전 설정은 zip으로 내보내집니다." msgid "" "Only the filament names with user filament presets will be displayed, \n" "and all user filament presets in each filament name you select will be exported as a zip." msgstr "" "사용자 필라멘트 사전 설정이 있는 필라멘트 이름만 표시됩니다.\n" "선택한 각 필라멘트 이름의 모든 사용자 필라멘트 사전 설정은 zip으로 내보내집니다." msgid "" "Only printer names with changed process presets will be displayed, \n" "and all user process presets in each printer name you select will be exported as a zip." msgstr "" "프로세스 사전 설정이 변경된 프린터 이름만 표시됩니다.\n" "선택한 각 프린터 이름의 모든 사용자 프로세스 사전 설정은 zip으로 내보내집니다." msgid "Please select at least one printer or filament." msgstr "프린터나 필라멘트를 하나 이상 선택해 주세요." msgid "Please select a preset type you want to export" msgstr "내보내려는 유형을 선택하세요" msgid "Failed to create temporary folder, please try Export Configs again." msgstr "임시 폴더를 생성하지 못했습니다. 구성 내보내기를 다시 시도해 보세요." msgid "Edit Filament" msgstr "필라멘트 편집" msgid "Filament presets under this filament" msgstr "이 필라멘트 아래의 필라멘트 사전 설정" msgid "Note: If the only preset under this filament is deleted, the filament will be deleted after exiting the dialog." msgstr "참고: 이 필라멘트 아래의 유일한 사전 설정이 삭제되면 대화 상자를 종료한 후 필라멘트가 삭제됩니다." msgid "Presets inherited by other presets cannot be deleted" msgstr "다른 사전 설정에 상속된 사전 설정은 삭제할 수 없습니다" msgid "The following presets inherits this preset." msgid_plural "The following preset inherits this preset." msgstr[0] "다음 사전 설정은 이 사전 설정을 상속합니다." msgid "Delete Preset" msgstr "사전 설정 삭제" msgid "Are you sure to delete the selected preset?" msgstr "선택한 사전 설정을 삭제하시겠습니까?" msgid "Delete preset" msgstr "사전 설정 삭제" msgid "+ Add Preset" msgstr "+ 사전 설정 추가" msgid "" "All the filament presets belong to this filament would be deleted.\n" "If you are using this filament on your printer, please reset the filament information for that slot." msgstr "" "이 필라멘트에 속한 모든 필라멘트 사전 설정이 삭제됩니다.\n" "프린터에서 이 필라멘트를 사용하는 경우 해당 슬롯의 필라멘트 정보를 재설정하세요." msgid "Delete filament" msgstr "필라멘트 삭제" msgid "Add Preset" msgstr "사전 설정 추가" msgid "Add preset for new printer" msgstr "새 프린터에 대한 사전 설정 추가" msgid "Copy preset from filament" msgstr "필라멘트에서 사전 설정 복사" msgid "The filament choice not find filament preset, please reselect it" msgstr "필라멘트 선택에서 사전 설정을 찾을 수 없습니다. 다시 선택하세요" msgid "[Delete Required]" msgstr "[삭제 필수]" msgid "Edit Preset" msgstr "프리셋 편집" msgid "For more information, please check out our Wiki" msgstr "더 자세한 내용은 위키를 확인해주세요" msgid "Wiki" msgstr "위키" msgid "Collapse" msgstr "무너짐" msgid "Daily Tips" msgstr "일일 팁" msgid "" "The printer nozzle information has not been set.\n" "Please configure it before proceeding with the calibration." msgstr "" "프린터 노즐 정보가 설정되지 않았습니다.\n" "보정을 진행하기 전에 구성해 주세요." msgid "" "The nozzle type does not match the actual printer nozzle type.\n" "Please click the Sync button above and restart the calibration." msgstr "" "노즐 유형이 실제 프린터 노즐 유형과 일치하지 않습니다.\n" "위의 동기화 버튼을 클릭하고 보정을 다시 시작하세요." #, c-format, boost-format msgid "Printing %1s material with %2s nozzle may cause nozzle damage." msgstr "%2s 노즐로 %1s 자료를 인쇄하면 노즐이 손상될 수 있습니다." msgid "Need select printer" msgstr "프린터 선택 필요" msgid "The start, end or step is not valid value." msgstr "시작, 끝 또는 단계가 유효한 값이 아닙니다." msgid "The number of printer extruders and the printer selected for calibration does not match." msgstr "프린터 압출기 수와 보정을 위해 선택한 프린터가 일치하지 않습니다." #, c-format, boost-format msgid "The nozzle diameter of %s extruder is 0.2mm which does not support automatic Flow Dynamics calibration." msgstr "%s 압출기의 노즐 직경은 0.2mm이며 자동 유동 역학 보정을 지원하지 않습니다." #, c-format, boost-format msgid "" "The currently selected nozzle diameter of %s extruder does not match the actual nozzle diameter.\n" "Please click the Sync button above and restart the calibration." msgstr "" "현재 선택된 %s 압출기의 노즐 직경이 실제 노즐 직경과 일치하지 않습니다.\n" "위의 동기화 버튼을 클릭하고 보정을 다시 시작하세요." msgid "" "The nozzle diameter does not match the actual printer nozzle diameter.\n" "Please click the Sync button above and restart the calibration." msgstr "" "노즐 직경이 실제 프린터 노즐 직경과 일치하지 않습니다.\n" "위의 동기화 버튼을 클릭하고 보정을 다시 시작하세요." #, c-format, boost-format msgid "" "The currently selected nozzle type of %s extruder does not match the actual printer nozzle type.\n" "Please click the Sync button above and restart the calibration." msgstr "" "현재 선택한 %s 압출기의 노즐 유형이 실제 프린터 노즐 유형과 일치하지 않습니다.\n" "위의 동기화 버튼을 클릭하고 보정을 다시 시작하십시오." msgid "Unable to calibrate: maybe because the set calibration value range is too large, or the step is too small" msgstr "교정할 수 없음: 설정된 교정 값 범위가 너무 크거나 단계가 너무 작기 때문일 수 있습니다" msgid "Physical Printer" msgstr "물리 프린터" msgid "Print Host upload" msgstr "출력 호스트 업로드" # AI Translated msgid "Select the network agent implementation for printer communication. Available agents are registered at startup." msgstr "프린터 통신에 사용할 네트워크 에이전트 구현을 선택합니다. 사용 가능한 에이전트는 시작 시 등록됩니다." # AI Translated msgid "Select a Flashforge printer" msgstr "Flashforge 프린터 선택" # AI Translated msgid "Discovered Printers" msgstr "검색된 프린터" msgid "Could not get a valid Printer Host reference" msgstr "유효한 프린터 호스트 참조를 가져올 수 없습니다" # AI Translated msgid "Valid session not detected. Proceed with login to 3DPrinterOS?" msgstr "유효한 세션이 감지되지 않았습니다. 3DPrinterOS에 로그인하시겠습니까?" msgid "Success!" msgstr "성공!" msgid "Are you sure to log out?" msgstr "정말 로그아웃하시겠습니까?" msgid "View print host webui in Device tab" msgstr "기기 탭에서 출력 호스트의 웹UI 표시" msgid "Replace the BambuLab's device tab with print host webui" msgstr "뱀부랩의 기기 탭을 출력 호스트의 웹UI로 교체" msgid "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-signed certificate." msgstr "HTTPS CA 파일은 선택 사항입니다. 자체 서명된 인증서와 함께 HTTPS를 사용하는 경우에만 필요합니다." msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*" msgstr "인증서 파일 (*.crt, *.pem)|*.crt;*.pem|All files|*.*" msgid "Open CA certificate file" msgstr "CA 인증서 파일 열기" #, c-format, boost-format msgid "On this system, %s uses HTTPS certificates from the system Certificate Store or Keychain." msgstr "이 시스템에서 %s는 시스템 인증서 저장소나 키체인의 HTTPS 인증서를 사용합니다." msgid "To use a custom CA file, please import your CA file into Certificate Store / Keychain." msgstr "사용자 정의 CA 파일을 사용하려면 CA 파일을 인증서 저장소/키체인으로 가져오십시오." msgid "Login/Test" msgstr "로그인/테스트" msgid "Connection to printers connected via the print host failed." msgstr "출력 호스트를 통해 연결된 프린터에 연결하지 못했습니다." # AI Translated msgid "Detect Creality K-series printer" msgstr "Creality K 시리즈 프린터 감지" # AI Translated msgid "Click Scan to look for K-series printers on your network." msgstr "네트워크에서 K 시리즈 프린터를 찾으려면 검색을 클릭하십시오." # AI Translated msgid "Use Selected" msgstr "선택한 항목 사용" # AI Translated msgid "Scanning the LAN for K-series printers... this takes a few seconds." msgstr "LAN에서 K 시리즈 프린터를 검색하는 중... 몇 초 정도 걸립니다." # AI Translated msgid "No K-series printers found. Make sure the printer is on the same network and not blocked by Wi-Fi client isolation, then click Scan again." msgstr "K 시리즈 프린터를 찾지 못했습니다. 프린터가 같은 네트워크에 있고 Wi-Fi 클라이언트 격리로 차단되지 않았는지 확인한 후 검색을 다시 클릭하십시오." # AI Translated #, c-format msgid "Found %zu Creality printer(s). Select one and click Use Selected." msgstr "Creality 프린터 %zu대를 찾았습니다. 하나를 선택한 후 선택한 항목 사용을 클릭하십시오." # AI Translated msgid "Active" msgstr "활성" # AI Translated msgid "Printers" msgstr "프린터" # AI Translated msgid "Processes" msgstr "프로세스" # AI Translated msgid "Show/Hide system information" msgstr "시스템 정보 표시/숨기기" # AI Translated msgid "Copy system information to clipboard" msgstr "시스템 정보를 클립보드에 복사" # AI Translated msgid "We need information for diagnosing source of the issue. Check wiki page for detailed guide." msgstr "문제의 원인을 진단하려면 정보가 필요합니다. 자세한 안내는 위키 페이지를 확인하십시오." # AI Translated msgid "Pack button collects project file and logs of current session onto a zip file." msgstr "패키지 버튼은 현재 세션의 프로젝트 파일과 로그를 zip 파일로 모읍니다." # AI Translated msgid "Any additional visual examples like images or screen recordings might be helpful while reporting the issue." msgstr "이미지나 화면 녹화 같은 추가 시각 자료는 문제를 보고할 때 도움이 됩니다." # AI Translated msgid "Report issue" msgstr "문제 보고" # AI Translated msgid "Pack" msgstr "패키지 만들기" # AI Translated msgid "Cleans and rebuilds system profiles cache on next launch." msgstr "다음 실행 시 시스템 프로필 캐시를 정리하고 다시 만듭니다." # AI Translated msgid "Clean system profiles cache" msgstr "시스템 프로필 캐시 정리" # AI Translated msgid "Clean" msgstr "정리" # AI Translated msgid "Loaded profiles overview" msgstr "로드된 프로필 개요" # AI Translated msgid "This section shows information for loaded profiles." msgstr "이 섹션에는 로드된 프로필의 정보가 표시됩니다." # AI Translated msgid "Exports detailed overview of loaded profiles in json format." msgstr "로드된 프로필의 상세 개요를 JSON 형식으로 내보냅니다." # AI Translated msgid "Configurations folder" msgstr "설정 폴더" # AI Translated msgid "Opens configurations folder." msgstr "설정 폴더를 엽니다." # AI Translated msgid "Log level" msgstr "로그 수준" # AI Translated msgid "Stored logs" msgstr "저장된 로그" # AI Translated msgid "Packs all stored logs onto a zip file." msgstr "저장된 모든 로그를 zip 파일로 묶습니다." # AI Translated msgid "Profiles" msgstr "프로필" # AI Translated msgid "Select NO to close dialog and review project." msgstr "대화 상자를 닫고 프로젝트를 검토하려면 아니요를 선택하십시오." # AI Translated msgid "No project file on current session. Only logs will be included to package" msgstr "현재 세션에 프로젝트 파일이 없습니다. 패키지에는 로그만 포함됩니다" # AI Translated msgid "Please make sure any instances of OrcaSlicer are not running" msgstr "실행 중인 OrcaSlicer 인스턴스가 없는지 확인하십시오" # AI Translated msgid "System folder cannot be deleted because some files are in use by another application. Please close any applications using these files and try again." msgstr "일부 파일을 다른 애플리케이션이 사용 중이어서 시스템 폴더를 삭제할 수 없습니다. 해당 파일을 사용하는 애플리케이션을 모두 닫고 다시 시도하십시오." # AI Translated msgid "Failed to delete system folder..." msgstr "시스템 폴더를 삭제하지 못했습니다..." # AI Translated msgid "Failed to determine executable path." msgstr "실행 파일 경로를 확인하지 못했습니다." # AI Translated msgid "Failed to launch a new instance." msgstr "새 인스턴스를 실행하지 못했습니다." # AI Translated msgid "log(s)" msgstr "개 로그" # AI Translated msgid "Choose where to save the exported JSON file" msgstr "내보낸 JSON 파일을 저장할 위치를 선택하십시오" # AI Translated msgid "" "Export failed\n" "Please check write permissions or file in use by another application" msgstr "" "내보내기에 실패했습니다\n" "쓰기 권한을 확인하거나 파일이 다른 애플리케이션에서 사용 중인지 확인하십시오" # AI Translated msgid "Choose where to save the exported ZIP file" msgstr "내보낸 ZIP 파일을 저장할 위치를 선택하십시오" # AI Translated msgid "File already exists. Overwrite?" msgstr "파일이 이미 있습니다. 덮어쓰시겠습니까?" # AI Translated msgid "3DPrinterOS Cloud upload options" msgstr "3DPrinterOS 클라우드 업로드 옵션" # AI Translated msgid "Single file" msgstr "단일 파일" # AI Translated msgid "Project File" msgstr "프로젝트 파일" # AI Translated msgid "Project:" msgstr "프로젝트:" # AI Translated msgid "Printer type:" msgstr "프린터 유형:" # AI Translated msgid "Printer type not found, please select manually." msgstr "프린터 유형을 찾을 수 없습니다. 직접 선택하십시오." # AI Translated msgid "Authorizing..." msgstr "인증 중..." # AI Translated msgid "Error. Can't get api token for authorization" msgstr "오류. 인증용 API 토큰을 가져올 수 없습니다" # AI Translated msgid "Could not parse server response." msgstr "서버 응답을 구문 분석할 수 없습니다." # AI Translated msgid "Error saving session to file" msgstr "세션을 파일에 저장하는 중 오류가 발생했습니다" # AI Translated msgid "Error session check" msgstr "세션 확인 중 오류가 발생했습니다" # AI Translated msgid "Error during file upload" msgstr "파일 업로드 중 오류가 발생했습니다" #, c-format, boost-format msgid "Mismatched type of print host: %s" msgstr "일치하지 않는 출력 호스트 유형: %s" msgid "Connection to AstroBox is working correctly." msgstr "AstroBox 연결이 올바르게 작동합니다." msgid "Could not connect to AstroBox" msgstr "AstroBox에 연결할 수 없습니다" msgid "Note: AstroBox version 1.1.0 or higher is required." msgstr "참고: AstroBox 버전 1.1.0 이상이 필요합니다." msgid "Connection to Duet is working correctly." msgstr "Duet 연결이 제대로 작동합니다." msgid "Could not connect to Duet" msgstr "Duet에 연결할 수 없습니다" msgid "Unknown error occurred" msgstr "알 수 없는 오류가 발생했습니다" msgid "Wrong password" msgstr "잘못된 비밀번호" msgid "Could not get resources to create a new connection" msgstr "새 연결을 생성하기 위한 리소스를 얻을 수 없습니다" msgid "Upload not enabled on FlashAir card." msgstr "FlashAir 카드에서는 업로드가 활성화되지 않았습니다." msgid "Connection to FlashAir is working correctly and upload is enabled." msgstr "FlashAir 연결이 올바르게 작동하고 업로드가 활성화되었습니다." msgid "Could not connect to FlashAir" msgstr "FlashAir에 연결할 수 없습니다" msgid "Note: FlashAir with firmware 2.00.02 or newer and activated upload function is required." msgstr "참고: 펌웨어 2.00.02 또는 이후 버전을 사용중이며 업로드 기능이 활성화된 FlashAir가 필요합니다." msgid "Connection to MKS is working correctly." msgstr "MKS에 대한 연결이 올바르게 작동합니다." msgid "Could not connect to MKS" msgstr "MKS에 연결할 수 없습니다" # AI Translated msgid "Connection to Moonraker is working correctly." msgstr "Moonraker 연결이 정상적으로 작동합니다." # AI Translated msgid "Could not connect to Moonraker" msgstr "Moonraker에 연결할 수 없습니다" # AI Translated msgid "The host responded but it doesn't look like Moonraker (missing result.klippy_state)." msgstr "호스트가 응답했지만 Moonraker로 보이지 않습니다(result.klippy_state 누락)." # AI Translated #, c-format, boost-format msgid "Could not parse Moonraker server response: %s" msgstr "Moonraker 서버 응답을 구문 분석할 수 없습니다: %s" msgid "Connection to OctoPrint is working correctly." msgstr "OctoPrint에 대한 연결이 올바르게 작동합니다." msgid "Could not connect to OctoPrint" msgstr "OctoPrint에 연결할 수 없습니다" msgid "Note: OctoPrint version 1.1.0 or higher is required." msgstr "참고: OctoPrint 버전 1.1.0 이상이 필요합니다." msgid "Connection to Prusa SL1 / SL1S is working correctly." msgstr "Prusa SL1 / SL1S에 대한 연결이 올바르게 작동합니다." msgid "Could not connect to Prusa SLA" msgstr "Prusa SLA에 연결할 수 없습니다" msgid "Connection to PrusaLink is working correctly." msgstr "PrusaLink에 대한 연결이 올바르게 작동합니다." msgid "Could not connect to PrusaLink" msgstr "PrusaLink에 연결할 수 없습니다" msgid "Storages found" msgstr "저장소를 찾았습니다." #. TRN %1% = storage path #, boost-format msgid "%1% : read only" msgstr "%1%: 읽기 전용" #. TRN %1% = storage path #, boost-format msgid "%1% : no free space" msgstr "%1%: 여유 공간이 없습니다" #. TRN %1% = host #, boost-format msgid "Upload has failed. There is no suitable storage found at %1%." msgstr "업로드에 실패했습니다. %1%에 적합한 저장소가 없습니다." msgid "Connection to Prusa Connect is working correctly." msgstr "Prusa Connect에 대한 연결이 올바르게 작동합니다." msgid "Could not connect to Prusa Connect" msgstr "Prusa Connect에 연결할 수 없습니다" msgid "Connection to Repetier is working correctly." msgstr "Repetier에 대한 연결이 올바르게 작동합니다." msgid "Could not connect to Repetier" msgstr "Repetier에 연결할 수 없습니다" msgid "Note: Repetier version 0.90.0 or higher is required." msgstr "참고: 최소 0.90.0 이상의 반복 버전이 필요합니다." #, boost-format msgid "" "HTTP status: %1%\n" "Message body: \"%2%\"" msgstr "" "HTTP 상태: %1%\n" "메시지 본문: \"%2%\"" #, boost-format msgid "" "Parsing of host response failed.\n" "Message body: \"%1%\"\n" "Error: \"%2%\"" msgstr "" "호스트 응답 구문 분석에 실패했습니다.\n" "메시지 본문: \"%1%\"\n" "오류: \"%2%\"" #, boost-format msgid "" "Enumeration of host printers failed.\n" "Message body: \"%1%\"\n" "Error: \"%2%\"" msgstr "" "호스트 프린터 열거에 실패했습니다.\n" "메시지 본문: \"%1%\"\n" "오류: \"%2%\"" msgid "It has a small layer height. This results in almost negligible layer lines and high print quality. It is suitable for most printing cases." msgstr "레이어 높이가 작기 때문에 레이어 라인이 거의 무시할 수 있고 출력 품질이 높습니다. 대부분의 일반적인 출력 케이스에 적합합니다." msgid "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds and acceleration, and the sparse infill pattern is Gyroid. This results in much higher print quality but a much longer print time." msgstr "0.2mm 노즐의 기본 프로파일과 비교하면 속도와 가속도가 낮고 성긴 채우기 패턴은 자이로이드입니다. 따라서 출력 품질은 훨씬 높아지지만 출력 시간은 훨씬 길어집니다." msgid "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height. This results in almost negligible layer lines and slightly shorter print time." msgstr "0.2mm 노즐의 기본 프로파일과 비교하면 레이어 높이가 약간 더 크고 레이어 라인이 거의 무시할 수 있으며 출력 시간이 약간 짧아집니다." msgid "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer height. This results in slightly visible layer lines but shorter print time." msgstr "0.2mm 노즐의 기본 프로파일과 비교하면 레이어 높이가 더 크고 레이어 선이 약간 눈에 띄지만 출력 시간은 더 짧아집니다." # AI Translated msgid "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height. This results in almost invisible layer lines and higher print quality but longer print time." msgstr "0.2 mm 노즐의 기본 프로필과 비교하여 레이어 높이가 더 작습니다. 그 결과 레이어 선이 거의 보이지 않고 출력 품질이 높아지지만 출력 시간은 길어집니다." msgid "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. This results in almost invisible layer lines and much higher print quality but much longer print time." msgstr "0.2mm 노즐의 기본 프로파일과 비교하면 레이어 라인이 더 작고 속도와 가속도가 낮으며 성긴 채우기 패턴은 자이로이드입니다. 따라서 레이어 선이 거의 보이지 않고 출력 품질이 훨씬 높아지지만 출력 시간은 훨씬 길어집니다." # AI Translated msgid "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height. This results in minimal layer lines and higher print quality but longer print time." msgstr "0.2 mm 노즐의 기본 프로필과 비교하여 레이어 높이가 더 작습니다. 그 결과 레이어 선이 최소화되고 출력 품질이 높아지지만 출력 시간은 길어집니다." msgid "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. This results in minimal layer lines and much higher print quality but much longer print time." msgstr "0.2mm 노즐의 기본 프로파일과 비교하면 레이어 라인이 더 작고 속도와 가속도가 낮으며 성긴 채우기 패턴은 자이로이드입니다. 따라서 레이어 라인이 최소화되고 출력 품질이 훨씬 높아지지만 출력 시간은 훨씬 길어집니다." msgid "It has a normal layer height. This results in average layer lines and print quality. It is suitable for most printing cases." msgstr "이는 일반적인 레이어 높이를 가지며 일반적인 레이어 선과 출력 품질을 가져옵니다. 대부분의 일반적인 출력 케이스에 적합합니다." msgid "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops and a higher sparse infill density. This results in higher print strength but more filament consumption and longer print time." msgstr "0.4mm 노즐의 기본 프로파일과 비교하여 더 많은 벽 루프와 더 높은 성긴 채우기 밀도를 갖습니다. 따라서 출력 강도는 높아지지만 필라멘트 소비가 늘어나고 출력 시간이 길어집니다." msgid "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height. This results in more apparent layer lines and lower print quality, but slightly shorter print time." msgstr "0.4mm 노즐의 기본 프로파일과 비교하면 레이어 높이가 더 크고 레이어 라인이 더 뚜렷해지고 출력 품질이 낮아지지만 출력 시간은 약간 짧아집니다." msgid "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height. This results in more apparent layer lines and lower print quality, but shorter print time." msgstr "0.4mm 노즐의 기본 프로파일과 비교하면 레이어 높이가 더 크고 레이어 라인이 더 뚜렷해지고 출력 품질이 낮아지지만 출력 시간은 짧아집니다." msgid "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height. This results in less apparent layer lines and higher print quality but longer print time." msgstr "0.4mm 노즐의 기본 프로파일과 비교하면 레이어 높이가 더 작아서 레이어 선이 덜 뚜렷하고 출력 품질이 높아지지만 출력 시간은 길어집니다." msgid "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. This results in less apparent layer lines and much higher print quality but much longer print time." msgstr "0.4mm 노즐의 기본 프로파일과 비교하면 레이어 높이가 더 작고 속도와 가속도가 낮으며 성긴 채우기 패턴은 자이로이드입니다. 따라서 레이어 선이 덜 뚜렷해지고 출력 품질이 훨씬 높아지지만 출력 시간은 훨씬 길어집니다." msgid "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height. This results in almost negligible layer lines and higher print quality but longer print time." msgstr "0.4mm 노즐의 기본 프로파일과 비교하면 레이어 높이가 더 작아 레이어 라인이 거의 무시할 수 있고 출력 품질이 높아지지만 출력 시간은 길어집니다." msgid "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. This results in almost negligible layer lines and much higher print quality but much longer print time." msgstr "0.4mm 노즐의 기본 프로파일과 비교하면 레이어 높이가 더 작고 속도와 가속도가 낮으며 성긴 채우기 패턴은 자이로이드입니다. 따라서 레이어 라인은 거의 무시할 수 있고 출력 품질은 훨씬 높지만 출력 시간은 훨씬 길어집니다." msgid "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height. This results in almost negligible layer lines and longer print time." msgstr "0.4mm 노즐의 기본 프로파일과 비교하면 레이어 높이가 더 작아서 레이어 라인을 거의 무시할 수 있고 출력 시간이 길어집니다." msgid "It has a big layer height. This results in apparent layer lines and ordinary print quality and print time." msgstr "레이어 높이가 커서 레이어 선이 뚜렷이 보이고 출력 품질과 출력 시간이 보통입니다." msgid "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops and a higher sparse infill density. This results in higher print strength but more filament consumption and longer print time." msgstr "0.6mm 노즐의 기본 프로파일과 비교하여 더 많은 벽 루프와 더 높은 성긴 채우기 밀도를 갖습니다. 따라서 출력 강도는 높아지지만 필라멘트 소비가 늘어나고 출력 시간이 길어집니다." msgid "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height. This results in more apparent layer lines and lower print quality, but shorter print time in some cases." msgstr "0.6mm 노즐의 기본 프로파일과 비교하면 레이어 높이가 더 크고 레이어 라인이 더 뚜렷해지고 출력 품질이 낮아지지만 일부 출력의 경우 출력 시간이 짧아집니다." msgid "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height. This results in much more apparent layer lines and much lower print quality, but shorter print time in some cases." msgstr "0.6mm 노즐의 기본 프로파일과 비교하면 레이어 높이가 더 크고 레이어 라인이 훨씬 더 뚜렷해지고 출력 품질이 훨씬 낮아지지만 일부 출력의 경우 출력 시간이 짧아집니다." msgid "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height. This results in less apparent layer lines and slight higher print quality but longer print time." msgstr "0.6mm 노즐의 기본 프로파일과 비교하면 레이어 높이가 더 작아서 레이어 선이 덜 뚜렷해지고 출력 품질이 약간 높아지지만 출력 시간은 길어집니다." msgid "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height. This results in less apparent layer lines and higher print quality but longer print time." msgstr "0.6mm 노즐의 기본 프로파일과 비교하면 레이어 높이가 더 작아서 레이어 선이 덜 뚜렷하고 출력 품질이 높아지지만 출력 시간이 길어집니다." # AI Translated msgid "It has a very big layer height. This results in very apparent layer lines, low print quality and shorter print time." msgstr "레이어 높이가 매우 큽니다. 그 결과 레이어 선이 매우 뚜렷해지고 출력 품질이 낮아지지만 출력 시간은 짧아집니다." # AI Translated msgid "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height. This results in very apparent layer lines and much lower print quality, but shorter print time in some cases." msgstr "0.8 mm 노즐의 기본 프로필과 비교하여 레이어 높이가 더 큽니다. 그 결과 레이어 선이 매우 뚜렷해지고 출력 품질이 크게 낮아지지만, 경우에 따라 출력 시간은 짧아집니다." # AI Translated msgid "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger layer height. This results in extremely apparent layer lines and much lower print quality, but much shorter print time in some cases." msgstr "0.8 mm 노즐의 기본 프로필과 비교하여 레이어 높이가 훨씬 큽니다. 그 결과 레이어 선이 극도로 뚜렷해지고 출력 품질이 크게 낮아지지만, 경우에 따라 출력 시간은 훨씬 짧아집니다." msgid "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height. This results in slightly less but still apparent layer lines and slightly higher print quality but longer print time in some cases." msgstr "0.8mm 노즐의 기본 프로파일과 비교하면 레이어 높이가 약간 더 작아서 약간 적지만 여전히 뚜렷한 레이어 라인이 나타나고 출력 품질이 약간 높아지지만 일부 출력의 경우 출력 시간이 길어집니다." # AI Translated msgid "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer height. This results in less but still apparent layer lines and slightly higher print quality but longer print time in some cases." msgstr "0.8 mm 노즐의 기본 프로필과 비교하여 레이어 높이가 더 작습니다. 그 결과 레이어 선이 줄어들지만 여전히 눈에 띄며, 출력 품질은 약간 높아지지만 경우에 따라 출력 시간은 길어집니다." msgid "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances." msgstr "이것은 일반적으로 사용되는 필라멘트도 아니고 Bambu 필라멘트도 아니며 브랜드마다 매우 다양하므로 출력하기 전에 공급업체에 적합한 프로파일을 요청하고 성능에 따라 일부 매개 변수를 조정하는 것이 좋습니다." msgid "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials." msgstr "이 필라멘트를 출력할 때는 뒤틀리거나 레이어 접착 강도가 낮아질 위험이 있습니다. 더 나은 결과를 얻으려면 이 위키를 참조하세요: 고온/엔지니어링 소재 출력 팁을 참조하세요." msgid "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials." msgstr "이 필라멘트를 출력할 때는 노즐 막힘, 흘러내림, 뒤틀림 및 낮은 레이어 접착 강도의 위험이 있습니다. 더 나은 결과를 얻으려면 이 위키를 참조하세요: 고온/엔지니어링 재료를 위한 출력 팁을 참조하세요." msgid "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG." msgstr "해당 필라멘트로 더 나은 투명 또는 반투명 결과를 얻으려면 이 위키를 참조하세요: 투명 PETG를 위한 출력 팁을 참조하세요." msgid "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing." msgstr "출력물의 광택을 높이려면 사용하기 전에 필라멘트를 건조시키고 슬라이스할 때 외벽 속도를 40~60mm/s로 설정하세요." msgid "This filament is only used to print models with a low density usually, and some special parameters are required. To get better printing quality, please refer to this wiki: Instructions for printing RC model with foaming PLA (PLA Aero)." msgstr "이 필라멘트는 일반적으로 밀도가 낮은 모델을 출력하는 데만 사용되며 몇 가지 특수 매개변수가 필요합니다. 더 나은 출력 품질을 얻으려면 이 위키를 참조하세요: 발포 PLA(PLA Aero)로 RC 모델 출력 지침을 참조하세요." msgid "This filament is only used to print models with a low density usually, and some special parameters are required. To get better printing quality, please refer to this wiki: ASA Aero Printing Guide." msgstr "이 필라멘트는 일반적으로 밀도가 낮은 모델을 출력하는 데만 사용되며 몇 가지 특수 매개변수가 필요합니다. 더 나은 출력 품질을 얻으려면 이 위키를 참조하세요: ASA 에어로 출력 가이드." msgid "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide." msgstr "이 필라멘트는 너무 부드러워서 AMS와 호환되지 않습니다. 출력에는 많은 요구 사항이 있으며 더 나은 출력 품질을 얻으려면 이 위키를 참조하세요: TPU 출력 가이드." msgid "This filament has high enough hardness (about 67D) and is compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide." msgstr "이 필라멘트는 경도가 충분히 높으며(약 67D) AMS와 호환됩니다. 출력에는 많은 요구 사항이 있으며 더 나은 출력 품질을 얻으려면 이 위키를 참조하세요: TPU 출력 가이드." msgid "If you are to print a kind of soft TPU, please don't slice with this profile, and it is only for TPU that has high enough hardness (not less than 55D) and is compatible with the AMS. To get better printing quality, please refer to this wiki: TPU printing guide." msgstr "부드러운 TPU를 출력할 경우 이 프로파일로 슬라이스하지 마시고, 경도가 충분히 높고(55D 이상) AMS와 호환되는 TPU에만 사용하시기 바랍니다. 더 나은 출력 품질을 얻으려면 이 위키를 참조하세요: TPU 출력 가이드." msgid "This is a water-soluble support filament, and usually it is only for the support structure and not for the model body. Printing this filament is of many requirements, and to get better printing quality, please refer to this wiki: PVA Printing Guide." msgstr "수용성 서포트 필라멘트로, 일반적으로 모델 본체가 아닌 서포트 구조에만 사용됩니다. 이 필라멘트를 출력하려면 많은 요구 사항이 있으며, 더 나은 출력 품질을 얻으려면 이 위키를 참조하세요: PVA 프린팅 가이드." msgid "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function." msgstr "이것은 수용성이 아닌 서포트 필라멘트로, 일반적으로 모델 본체가 아닌 서포트 구조에만 사용됩니다. 더 나은 출력 품질을 얻으려면 이 위키를 참조하세요: 서포트 필라멘트 및 서포트 기능을 위한 출력 팁을 참고하세요." msgid "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets." msgstr "일반 사전 설정은 더 다양한 필라멘트와의 호환성을 위해 보수적으로 조정되었습니다. 출력 품질과 속도를 높이려면 Bambu 사전 설정과 함께 Bambu 필라멘트를 사용하세요." msgid "High quality profile for 0.2mm nozzle, prioritizing print quality." msgstr "출력 품질을 우선시하는 0.2mm 노즐에 대한 고품질 프로필." msgid "High quality profile for 0.16mm layer height, prioritizing print quality and strength." msgstr "출력 품질과 강도를 우선시하는 0.16mm 레이어 높이의 고품질 프로필." msgid "Standard profile for 0.16mm layer height, prioritizing speed." msgstr "속도를 우선시하는 0.16mm 레이어 높이의 표준 프로필." msgid "High quality profile for 0.2mm layer height, prioritizing strength and print quality." msgstr "강도 및 출력 품질을 우선시하는 0.2mm 레이어 높이의 고품질 프로필." msgid "Standard profile for 0.4mm nozzle, prioritizing speed." msgstr "속도를 우선시하는 0.4mm 노즐의 표준 프로필." msgid "High quality profile for 0.6mm nozzle, prioritizing print quality and strength." msgstr "출력 품질과 강도를 우선시하는 0.6mm 노즐용 고품질 프로필." msgid "Strength profile for 0.6mm nozzle, prioritizing strength." msgstr "강도를 우선시하는 0.6mm 노즐의 강도 프로필" msgid "Standard profile for 0.6mm nozzle, prioritizing speed." msgstr "속도를 우선시하는 0.6mm 노즐의 표준 프로필." msgid "High quality profile for 0.8mm nozzle, prioritizing print quality." msgstr "출력 품질을 우선시하는 0.8mm 노즐용 고품질 프로필." msgid "Strength profile for 0.8mm nozzle, prioritizing strength." msgstr "강도를 우선시하는 0.8mm 노즐의 강도 프로필." msgid "Standard profile for 0.8mm nozzle, prioritizing speed." msgstr "속도를 우선시하는 0.8mm 노즐의 표준 프로필." msgid "No AMS" msgstr "AMS 없음" msgid "There is no device available to send printing." msgstr "출력을 전송할 수 있는 장치가 없습니다." msgid "The number of printers in use simultaneously cannot be equal to 0." msgstr "동시에 사용 중인 프린터의 수는 0과 같을 수 없습니다." msgid "Use External Spool" msgstr "외부 스풀 사용" msgid "Select Printers" msgstr "프린터 선택" msgid "Device Name" msgstr "장치 이름" msgid "Device Status" msgstr "장치 상태" msgid "AMS Status" msgstr "AMS 상태" msgid "Please select the devices you would like to manage here (up to 6 devices)" msgstr "여기에서 관리할 장치를 선택하세요 (최대 6개 장치)" msgid "Printing Options" msgstr "출력 옵션" msgid "Flow Dynamic Calibration" msgstr "압출량 동적 보정" msgid "Send Options" msgstr "전송 옵션" msgid "Send to" msgstr "받는사람" msgid "printers at the same time. (It depends on how many devices can undergo heating at the same time.)" msgstr "프린터를 동시에 사용할 수 있습니다. (동시에 가열할 수 있는 장치 수에 따라 다릅니다.)" msgid "Wait" msgstr "대기" msgid "minute each batch. (It depends on how long it takes to complete heating.)" msgstr "분 단위로 배치합니다. (가열을 완료하는 데 걸리는 시간에 따라 다릅니다.)" msgid "Task Sending" msgstr "작업 전송중" msgid "Task Sent" msgstr "작업 전송됨" msgid "Edit multiple printers" msgstr "여러 프린터 편집" msgid "Select connected printers (0/6)" msgstr "연결된 프린터 선택 (0/6)" #, c-format, boost-format msgid "Select Connected Printers (%d/6)" msgstr "연결된 프린터 선택 (%d/6)" #, c-format, boost-format msgid "The maximum number of printers that can be selected is %d" msgstr "선택할 수 있는 최대 프린터 수는 %d입니다" msgid "No task" msgstr "작업 없음" msgid "Edit Printers" msgstr "프린터 편집" msgid "Task Name" msgstr "작업 이름" msgid "Actions" msgstr "동작" msgid "Task Status" msgstr "작업 상태" msgid "Sent Time" msgstr "전송한 시간" msgid "There are no tasks to be sent!" msgstr "전송할 작업이 없습니다!" msgid "No historical tasks!" msgstr "작업 내역이 없습니다!" msgid "Upgrading" msgstr "업그레이드 하기" msgid "Syncing" msgstr "동기화" msgid "Printing Finish" msgstr "출력 완료" msgid "Printing Failed" msgstr "출력 실패" msgid "Printing Pause" msgstr "출력 일시중지" msgid "Pending" msgstr "대기중" msgid "Sending" msgstr "전송중" msgid "Sending Finish" msgstr "보내기 완료" msgid "Sending Cancel" msgstr "보내기 취소" msgid "Sending Failed" msgstr "전송 실패" msgid "Print Success" msgstr "출력 성공" msgid "Print Failed" msgstr "출력 실패" msgid "Removed" msgstr "삭제됨" # AI Translated msgid "Enable smart filament assign: Assign one filament to multiple nozzles to maximize savings" msgstr "스마트 필라멘트 할당 활성화: 하나의 필라멘트를 여러 노즐에 할당하여 절약을 극대화합니다" # AI Translated msgid "Fila Saving" msgstr "필라멘트 절약" msgid "Don't remind me again" msgstr "다시 알리지 마세요" msgid "No further pop-up will appear. You can reopen it in 'Preferences'" msgstr "더 이상 팝업이 표시되지 않습니다. '환경설정'에서 다시 열 수 있습니다" msgid "Filament-Saving Mode" msgstr "필라멘트 절약 모드" msgid "Convenience Mode" msgstr "편의 모드" msgid "Custom Mode" msgstr "사용자 지정 모드" # AI Translated msgid "Generates filament grouping for the left and right nozzles based on the most filament-saving principles to minimize waste." msgstr "낭비를 최소화하기 위해 필라멘트 절약을 최우선 기준으로 삼아 좌우 노즐의 필라멘트 그룹을 생성합니다." # AI Translated msgid "Generates filament grouping for the left and right nozzles based on the printer's actual filament status, reducing the need for manual filament adjustment." msgstr "프린터의 실제 필라멘트 상태를 기준으로 좌우 노즐의 필라멘트 그룹을 생성하여 수동으로 필라멘트를 조정할 필요를 줄입니다." msgid "Manually assign filament to the left or right nozzle" msgstr "필라멘트를 왼쪽 또는 오른쪽 노즐에 수동으로 할당합니다" msgid "Global settings" msgstr "글로벌 설정" msgid "Video tutorial" msgstr "비디오 자습서" msgid "(Sync with printer)" msgstr "(프린터와 동기화)" # AI Translated #, c-format, boost-format msgid "Error: %s extruder has no available %s nozzle, current group result is invalid." msgstr "오류: %s 압출기에 사용 가능한 %s 노즐이 없어 현재 그룹 결과가 유효하지 않습니다." msgid "We will slice according to this grouping method:" msgstr "이 그룹화 방법에 따라 슬라이싱합니다:" # AI Translated msgid "Tip: You can drag the filaments to reassign them to different nozzles." msgstr "팁: 필라멘트를 드래그하여 다른 노즐에 다시 할당할 수 있습니다." # AI Translated msgid "Please adjust your grouping or click " msgstr "그룹을 조정하거나 " # AI Translated msgid " to set nozzle count" msgstr " 을(를) 클릭하여 노즐 개수를 설정하십시오" # AI Translated msgid "Set the physical nozzle count..." msgstr "실제 노즐 개수를 설정하십시오..." msgid "The filament grouping method for current plate is determined by the dropdown option at the slicing plate button." msgstr "현재 플레이트의 필라멘트 그룹화 방법은 슬라이스 플레이트 버튼의 드롭다운 옵션에 따라 결정됩니다." msgid "Connected to Obico successfully!" msgstr "Obico에 성공적으로 연결되었습니다!" msgid "Could not connect to Obico" msgstr "Obico에 연결할 수 없습니다" msgid "Connected to SimplyPrint successfully!" msgstr "SimplyPrint에 성공적으로 연결되었습니다!" msgid "Could not connect to SimplyPrint" msgstr "SimplyPrint에 연결할 수 없습니다" msgid "Internal error" msgstr "내부 오류" msgid "Unknown error" msgstr "알 수 없는 오류" msgid "SimplyPrint account not linked. Go to Connect options to set it up." msgstr "SimplyPrint 계정이 연결되지 않았습니다. 연결 옵션으로 이동하여 설정합니다." # AI Translated msgid "Flashforge returned an invalid JSON response." msgstr "Flashforge가 잘못된 JSON 응답을 반환했습니다." # AI Translated msgid "No Flashforge printers were discovered on the local network." msgstr "로컬 네트워크에서 Flashforge 프린터를 찾지 못했습니다." # AI Translated msgid "Connected to Flashforge local API successfully." msgstr "Flashforge 로컬 API에 성공적으로 연결했습니다." # AI Translated msgid "Serial connection to Flashforge is working correctly." msgstr "Flashforge와의 시리얼 연결이 정상적으로 작동합니다." # AI Translated msgid "Could not connect to Flashforge local API" msgstr "Flashforge 로컬 API에 연결할 수 없습니다" # AI Translated msgid "Could not connect to Flashforge via serial" msgstr "시리얼을 통해 Flashforge에 연결할 수 없습니다" # AI Translated msgid "Flashforge local API requires both serial number and access code." msgstr "Flashforge 로컬 API에는 일련번호와 액세스 코드가 모두 필요합니다." # AI Translated msgid "Printer returned an error" msgstr "프린터가 오류를 반환했습니다" # AI Translated msgid "Missing system_info in response" msgstr "응답에 system_info가 없습니다" # AI Translated msgid "Missing printer serial number in response" msgstr "응답에 프린터 일련번호가 없습니다" # AI Translated msgid "Error parsing response" msgstr "응답 구문 분석 오류" # AI Translated msgid "ElegooLink not detected" msgstr "ElegooLink가 감지되지 않았습니다" # AI Translated msgid "Invalid access code" msgstr "잘못된 액세스 코드" # AI Translated msgid "CC2 device not detected" msgstr "CC2 장치가 감지되지 않았습니다" # AI Translated msgid "Connection to ElegooLink is working correctly." msgstr "ElegooLink 연결이 정상적으로 작동합니다." # AI Translated msgid "Could not connect to ElegooLink" msgstr "ElegooLink에 연결할 수 없습니다" # AI Translated #, boost-format msgid "Error code: %1%" msgstr "오류 코드: %1%" # AI Translated msgid "Upload failed" msgstr "업로드 실패" # AI Translated msgid "The file has been transferred, but some unknown errors occurred. Please check the device page for the file and try to start printing again." msgstr "파일은 전송되었지만 알 수 없는 오류가 발생했습니다. 장치 페이지에서 파일을 확인한 후 출력을 다시 시작해 보십시오." # AI Translated msgid "Failed to open file for upload." msgstr "업로드할 파일을 열지 못했습니다." # AI Translated msgid "Failed to read file chunk for upload." msgstr "업로드할 파일 조각을 읽지 못했습니다." # AI Translated msgid "CC2 upload failed" msgstr "CC2 업로드 실패" # AI Translated msgid "The file is empty or could not be read." msgstr "파일이 비어 있거나 읽을 수 없습니다." # AI Translated msgid "Failed to calculate file checksum." msgstr "파일 체크섬을 계산하지 못했습니다." # AI Translated msgid "Error code not found" msgstr "오류 코드를 찾을 수 없습니다" # AI Translated msgid "The printer is busy, please check the device page for the file and try to start printing again." msgstr "프린터가 사용 중입니다. 장치 페이지에서 파일을 확인한 후 출력을 다시 시작해 보십시오." # AI Translated msgid "The file is lost, please check and try again." msgstr "파일이 손실되었습니다. 확인 후 다시 시도하십시오." # AI Translated msgid "The file is corrupted, please check and try again." msgstr "파일이 손상되었습니다. 확인 후 다시 시도하십시오." # AI Translated msgid "Transmission abnormality, please check and try again." msgstr "전송에 이상이 있습니다. 확인 후 다시 시도하십시오." # AI Translated msgid "The file does not match the printer, please check and try again." msgstr "파일이 프린터와 일치하지 않습니다. 확인 후 다시 시도하십시오." # AI Translated msgid "Start print timeout" msgstr "출력 시작 시간 초과" # AI Translated msgid "Start print failed" msgstr "출력 시작 실패" # AI Translated msgid "Connected to CrealityPrint successfully!" msgstr "CrealityPrint에 성공적으로 연결했습니다!" # AI Translated msgid "Could not connect to CrealityPrint" msgstr "CrealityPrint에 연결할 수 없습니다" # AI Translated msgid "Connection timed out. Please check if the printer and computer network are functioning properly, and confirm that they are on the same network." msgstr "연결 시간이 초과되었습니다. 프린터와 컴퓨터의 네트워크가 정상적으로 작동하는지 확인하고, 두 장치가 같은 네트워크에 있는지 확인하십시오." # AI Translated msgid "The Hostname/IP/URL could not be parsed, please check it and try again." msgstr "호스트 이름/IP/URL을 구문 분석할 수 없습니다. 확인 후 다시 시도하십시오." # AI Translated msgid "File/data transfer interrupted. Please check the printer and network, then try it again." msgstr "파일/데이터 전송이 중단되었습니다. 프린터와 네트워크를 확인한 후 다시 시도하십시오." msgid "The provided state is not correct." msgstr "제공된 상태가 올바르지 않습니다." msgid "Please give the required permissions when authorizing this application." msgstr "이 애플리케이션을 승인할 때 필요한 권한을 부여하세요." msgid "Something unexpected happened when trying to log in, please try again." msgstr "로그인을 시도하는 동안 예기치 않은 문제가 발생했습니다. 다시 시도해 주세요." msgid "User canceled." msgstr "사용자가 취소했습니다." msgid "Head diameter" msgstr "헤드 직경" msgid "Max angle" msgstr "최대 각도" msgid "Detection radius" msgstr "감지 반경" # AI Translated msgid "Selected" msgstr "선택됨" # AI Translated msgid "Auto-generate" msgstr "자동 생성" # AI Translated msgid "Generate brim ears using Max angle and Detection radius" msgstr "최대 각도와 감지 반경을 사용하여 브림 귀를 생성합니다" # AI Translated msgid "Add or Select" msgstr "추가 또는 선택" msgid "Warning: The brim type is not set to \"painted\", the brim ears will not take effect!" msgstr "경고: 브림 유형이 “페인트”로 설정되어 있지 않으면 브림 귀가 적용되지 않습니다!" msgid "Set the brim type of this object to \"painted\"" msgstr "이 개체의 테두리 유형을 \"페인트\"로 설정합니다" msgid "invalid brim ears" msgstr " 유효하지 않은 브림 귀" msgid "Brim Ears" msgstr "브림 귀" msgid "Please select single object." msgstr "단일 객체를 선택하세요." # AI Translated msgid "Entering Brim Ears" msgstr "브림 귀 진입" # AI Translated msgid "Leaving Brim Ears" msgstr "브림 귀 나가기" msgid "Zoom Out" msgstr "축소" msgid "Zoom In" msgstr "확대" msgid "Load skipping objects information failed. Please try again." msgstr "건너뛰는 개체 정보를 로드하지 못했습니다. 다시 시도해 주세요." # AI Translated msgid "Failed to create the temporary folder." msgstr "임시 폴더를 만들지 못했습니다." #, c-format, boost-format msgid "/%d Selected" msgstr "/%d 선택됨" msgid "Nothing selected" msgstr "선택한 것이 없습니다." msgid "Over 64 objects in single plate" msgstr "단일 플레이트에 64개 이상의 물체" msgid "The current print job cannot be skipped" msgstr "현재 출력 작업은 건너뛸 수 없습니다." msgid "Skipping all objects." msgstr "모든 객체를 건너뛰기." msgid "The printing job will be stopped. Continue?" msgstr "출력 작업이 중단됩니다. 계속하시겠습니까?" #, c-format, boost-format msgid "Skipping %d objects." msgstr "%d 물체 건너뛰기" msgid "This action cannot be undone. Continue?" msgstr "이 작업은 취소할 수 없습니다. 계속하시겠습니까?" msgid "Skipping objects." msgstr "물체 건너뛰기" msgid "Select Filament" msgstr "필라멘트 선택" msgid "Null Color" msgstr "무효 색상" msgid "Multiple Color" msgstr "다중 색상" msgid "Official Filament" msgstr "공식 필라멘트" msgid "More Colors" msgstr "더 많은 색상" # AI Translated msgid "Network Plug-in Update Available" msgstr "네트워크 플러그인 업데이트 사용 가능" # AI Translated msgid "Bambu Network Plug-in Required" msgstr "Bambu 네트워크 플러그인 필요" # AI Translated msgid "The Bambu Network Plug-in is corrupted or incompatible. Please reinstall it." msgstr "Bambu 네트워크 플러그인이 손상되었거나 호환되지 않습니다. 다시 설치하십시오." # AI Translated msgid "The Bambu Network Plug-in is required for cloud features, printer discovery, and remote printing." msgstr "클라우드 기능, 프린터 검색, 원격 출력에는 Bambu 네트워크 플러그인이 필요합니다." # AI Translated #, c-format, boost-format msgid "Error: %s" msgstr "오류: %s" # AI Translated msgid "Show details" msgstr "세부 정보 표시" # AI Translated msgid "Hide details" msgstr "세부 정보 숨기기" # AI Translated msgid "Version to install:" msgstr "설치할 버전:" # AI Translated msgid "Download and Install" msgstr "다운로드 및 설치" # AI Translated msgid "A new version of the Bambu Network Plug-in is available." msgstr "Bambu 네트워크 플러그인의 새 버전을 사용할 수 있습니다." # AI Translated #, c-format, boost-format msgid "Current version: %s" msgstr "현재 버전: %s" # AI Translated msgid "Update to version:" msgstr "업데이트할 버전:" # AI Translated msgid "Don't Ask Again" msgstr "다시 묻지 않기" # AI Translated msgid "Update Now" msgstr "지금 업데이트" # AI Translated msgid "(Latest)" msgstr "(최신)" # AI Translated msgid "(installed)" msgstr "(설치됨)" # AI Translated msgid "The Bambu Network Plug-in has been installed successfully." msgstr "Bambu 네트워크 플러그인이 성공적으로 설치되었습니다." # AI Translated msgid "A restart is required to load the new plug-in. Would you like to restart now?" msgstr "새 플러그인을 로드하려면 다시 시작해야 합니다. 지금 다시 시작하시겠습니까?" # AI Translated msgid "Restart Now" msgstr "지금 다시 시작" # AI Translated msgid "NO RAMMING AT ALL" msgstr "채워넣기 전혀 없음" # AI Translated msgid "Volumetric speed" msgstr "압출 속도" msgid "Step file import parameters" msgstr "스텝 파일 가져오기 매개변수" msgid "Smaller linear and angular deflections result in higher-quality transformations but increase the processing time." msgstr "선형 및 각도 편향이 작을수록 고품질 변환이 가능하지만 처리 시간이 늘어납니다." msgid "Linear Deflection" msgstr "선형 편향" msgid "Please input a valid value (0.001 < linear deflection < 0.1)" msgstr "유효한 값(0.001 < 선형 편향 < 0.1)을 입력하세요" msgid "Angle Deflection" msgstr "각도 편향" msgid "Please input a valid value (0.01 < angle deflection < 1.0)" msgstr "유효한 값(0.01 < 각도 편향 < 1.0)을 입력하세요" msgid "Split compound and compsolid into multiple objects" msgstr "컴파운드 및 컴솔리드를 여러 개체로 분할하고 통합하기" msgid "Number of triangular facets" msgstr "삼각형 패싯 수" msgid "Calculating, please wait..." msgstr "계산 중, 잠시만 기다려주세요..." # AI Translated msgid "Save these settings as default" msgstr "이 설정을 기본값으로 저장" # AI Translated msgid "If enabled, the values above are stored as the defaults used for future STEP imports (and shown in Preferences)." msgstr "활성화하면 위의 값이 이후 STEP 가져오기에 사용되는 기본값으로 저장됩니다(기본 설정에도 표시됩니다)." # AI Translated msgid "PresetBundle" msgstr "PresetBundle" # AI Translated msgid "Bundle folder does not exist." msgstr "번들 폴더가 존재하지 않습니다." # AI Translated msgid "Failed to open folder." msgstr "폴더를 열지 못했습니다." # AI Translated msgid "Delete selected bundle from folder and all presets loaded from it?" msgstr "선택한 번들을 폴더에서 삭제하고 해당 번들에서 로드한 모든 사전 설정도 삭제하시겠습니까?" # AI Translated msgid "Delete Bundle" msgstr "번들 삭제" # AI Translated msgid "Failed to remove bundle." msgstr "번들을 제거하지 못했습니다." # AI Translated msgid "Remove Bundle" msgstr "번들 제거" # AI Translated msgid "Unsubscribe bundle?" msgstr "번들 구독을 취소하시겠습니까?" # AI Translated msgid "UnsubscribeBundle" msgstr "UnsubscribeBundle" # AI Translated msgid "Failed to unsubscribe bundle." msgstr "번들 구독을 취소하지 못했습니다." # AI Translated msgid "Unsubscribe Bundle" msgstr "번들 구독 취소" # AI Translated msgid "ExportPresetBundle" msgstr "ExportPresetBundle" # AI Translated msgid "Save preset bundle" msgstr "사전 설정 번들 저장" # AI Translated msgid "Performing desktop integration failed - boost::filesystem::canonical did not return appimage path." msgstr "데스크톱 통합을 수행하지 못했습니다 - boost::filesystem::canonical이 appimage 경로를 반환하지 않았습니다." # AI Translated msgid "Performing desktop integration failed - Could not find executable." msgstr "데스크톱 통합을 수행하지 못했습니다 - 실행 파일을 찾을 수 없습니다." # AI Translated msgid "Performing desktop integration failed because the application directory was not found." msgstr "애플리케이션 디렉터리를 찾을 수 없어 데스크톱 통합을 수행하지 못했습니다." # AI Translated msgid "Performing desktop integration failed - could not create Gcodeviewer desktop file. OrcaSlicer desktop file was probably created successfully." msgstr "데스크톱 통합을 수행하지 못했습니다 - Gcodeviewer 데스크톱 파일을 만들 수 없습니다. OrcaSlicer 데스크톱 파일은 정상적으로 생성되었을 가능성이 높습니다." # AI Translated msgid "Performing downloader desktop integration failed - boost::filesystem::canonical did not return appimage path." msgstr "다운로더 데스크톱 통합을 수행하지 못했습니다 - boost::filesystem::canonical이 appimage 경로를 반환하지 않았습니다." # AI Translated msgid "Performing downloader desktop integration failed - Could not find executable." msgstr "다운로더 데스크톱 통합을 수행하지 못했습니다 - 실행 파일을 찾을 수 없습니다." # AI Translated msgid "Performing downloader desktop integration failed because the application directory was not found." msgstr "애플리케이션 디렉터리를 찾을 수 없어 다운로더 데스크톱 통합을 수행하지 못했습니다." # AI Translated msgid "Desktop Integration" msgstr "데스크톱 통합" # AI Translated msgid "" "Desktop Integration sets this binary to be searchable by the system.\n" "\n" "Press \"Perform\" to proceed." msgstr "" "데스크톱 통합은 이 실행 파일을 시스템에서 검색할 수 있도록 설정합니다.\n" "\n" "계속하려면 \"수행\"을 누르십시오." # AI Translated msgid "The download has failed" msgstr "다운로드에 실패했습니다" # AI Translated #. TRN %1% = file path #, boost-format msgid "Can't create file at %1%" msgstr "%1%에 파일을 만들 수 없습니다" # AI Translated msgid "Archive preview" msgstr "아카이브 미리보기" # AI Translated msgid "Open File" msgstr "파일 열기" # AI Translated msgid "AMS Dryness Control" msgstr "AMS 건조 제어" # AI Translated msgid "Filament Drying Settings" msgstr "필라멘트 건조 설정" # AI Translated msgid "Stopping" msgstr "중지 중" # AI Translated msgid "Unable to dry temporarily due to ..." msgstr "다음 이유로 일시적으로 건조할 수 없습니다 ..." # AI Translated msgid "Drying Error" msgstr "건조 오류" # AI Translated msgid "Please check the Assistant for troubleshooting" msgstr "문제 해결은 어시스턴트를 확인하십시오" # AI Translated msgid "Please remove and store the filament (as shown)." msgstr "필라멘트를 (그림과 같이) 빼내어 보관하십시오." # AI Translated msgid "The AMS can rotate the filament which is properly stored, providing better drying results." msgstr "AMS는 올바르게 보관된 필라멘트를 회전시켜 더 나은 건조 결과를 제공합니다." # AI Translated msgid "Rotate spool when drying" msgstr "건조 시 스풀 회전" # AI Translated msgctxt "amsdrying" msgid "Back" msgstr "뒤로" # AI Translated msgid "Drying-Heating" msgstr "건조-가열" # AI Translated msgid "Drying-Dehumidifying" msgstr "건조-제습" # AI Translated msgid " maximum drying temperature is " msgstr " 최대 건조 온도는 " # AI Translated msgid " minimum drying temperature is " msgstr " 최소 건조 온도는 " # AI Translated msgid "This filament may not be completely dried." msgstr "이 필라멘트는 완전히 건조되지 않았을 수 있습니다." # AI Translated msgid "This AMS is currently printing. To ensure print quality, the drying temperature cannot exceed the recommended drying temperature." msgstr "이 AMS는 현재 출력 중입니다. 출력 품질을 보장하기 위해 건조 온도는 권장 건조 온도를 초과할 수 없습니다." # AI Translated msgid "The temperature shall not exceed the filament's heat distortion temperature" msgstr "온도는 필라멘트의 열변형 온도를 초과해서는 안 됩니다" # AI Translated msgid "Minimum time value cannot be less than 1." msgstr "최소 시간 값은 1보다 작을 수 없습니다." # AI Translated msgid "Maximum time value cannot be greater than 24." msgstr "최대 시간 값은 24보다 클 수 없습니다." # AI Translated msgid "Insufficient power" msgstr "전력 부족" # AI Translated msgid " Too many AMS drying simultaneously. Please plug in the power or stop other drying processes before starting." msgstr " 동시에 건조 중인 AMS가 너무 많습니다. 시작하기 전에 전원을 연결하거나 다른 건조 작업을 중지하십시오." # AI Translated msgid "AMS is busy" msgstr "AMS가 사용 중입니다" # AI Translated msgid " AMS is calibrating | reading RFID | loading/unloading material, please wait." msgstr " AMS가 교정 | RFID 읽기 | 재료 로드/언로드 중입니다. 잠시 기다려 주십시오." # AI Translated msgid "Filament in AMS outlet" msgstr "AMS 출구에 필라멘트 있음" # AI Translated msgid " The high drying temperature may cause AMS blockage, please unload first." msgstr " 높은 건조 온도는 AMS 막힘을 유발할 수 있습니다. 먼저 필라멘트를 언로드하십시오." # AI Translated msgid "Initiating AMS drying" msgstr "AMS 건조 시작 중" # AI Translated msgid "Not supported in 2D mode" msgstr "2D 모드에서는 지원되지 않습니다" # AI Translated msgid "Task in progress" msgstr "작업 진행 중" # AI Translated msgid " The AMS might be in use during Task." msgstr " 작업 중에는 AMS가 사용 중일 수 있습니다." # AI Translated msgid " Firmware update in progress, please wait..." msgstr " 펌웨어 업데이트가 진행 중입니다. 잠시 기다려 주십시오..." # AI Translated msgid " Please plug in the power and then use the drying function." msgstr " 전원을 연결한 후 건조 기능을 사용하십시오." # AI Translated msgid " The high drying temperature may cause AMS blockage. Please unload the filament manually before proceeding." msgstr " 높은 건조 온도는 AMS 막힘을 유발할 수 있습니다. 계속하기 전에 필라멘트를 수동으로 언로드하십시오." # AI Translated msgid "System is busy" msgstr "시스템이 사용 중입니다" # AI Translated msgid " Initiating other drying processes, please wait a few seconds..." msgstr " 다른 건조 작업을 시작하는 중입니다. 몇 초만 기다려 주십시오..." # AI Translated msgid "For better drying results, remove the filament and allow it to rotate." msgstr "더 나은 건조 결과를 위해 필라멘트를 빼내어 회전할 수 있도록 하십시오." # AI Translated msgid "The AMS will automatically rotate the stored filament slots to enhance the drying performance." msgstr "AMS는 건조 성능을 높이기 위해 보관된 필라멘트 슬롯을 자동으로 회전시킵니다." # AI Translated msgid "Alternatively, you can dry the filament without removing it." msgstr "또는 필라멘트를 빼지 않고 그대로 건조할 수도 있습니다." # AI Translated msgid "Unknown filaments will be treated as PLA." msgstr "알 수 없는 필라멘트는 PLA로 처리됩니다." # AI Translated msgid "Please store the filament marked with an exclamation mark." msgstr "느낌표로 표시된 필라멘트를 보관하십시오." # AI Translated msgid "Filament left in the feeder during drying may soften because the drying temperature exceeds the softening point of materials like PLA and TPU." msgstr "건조 온도가 PLA, TPU 등 재료의 연화점을 초과하므로 건조 중 피더에 남아 있는 필라멘트는 물러질 수 있습니다." # AI Translated msgid "Starting: Checking adapter connection" msgstr "시작 중: 어댑터 연결 확인" # AI Translated msgid "Starting: Checking filament status" msgstr "시작 중: 필라멘트 상태 확인" # AI Translated msgid "Starting: Checking drying presets" msgstr "시작 중: 건조 사전 설정 확인" # AI Translated msgid "Starting: Checking filament location" msgstr "시작 중: 필라멘트 위치 확인" # AI Translated msgid "Starting: Checking air intake" msgstr "시작 중: 공기 흡입구 확인" # AI Translated msgid "Starting: Checking air vent" msgstr "시작 중: 공기 배출구 확인" msgid "The filament may not be compatible with the current machine settings. Generic filament presets will be used." msgstr "필라멘트가 현재 기계 설정과 호환되지 않을 수 있습니다. 일반 필라멘트 사전 설정이 사용됩니다." msgid "The filament model is unknown. Still using the previous filament preset." msgstr "미지의 필라멘트 모델. 여전히 이전 필라멘트 사전 설정을 사용하고 있습니다." msgid "The filament model is unknown. Generic filament presets will be used." msgstr "필라멘트 모델을 알 수 없습니다. 일반 필라멘트 사전 설정이 사용됩니다." msgid "The filament may not be compatible with the current machine settings. A random filament preset will be used." msgstr "필라멘트가 현재 기기 설정과 호환되지 않을 수 있습니다. 임의의 필라멘트 사전 설정이 사용됩니다." msgid "The filament model is unknown. A random filament preset will be used." msgstr "미지의 필라멘트 모델. 무작위 필라멘트 사전 설정이 사용됩니다." #: resources/data/hints.ini: [hint:Precise wall] msgid "" "Precise wall\n" "Did you know that turning on precise wall can improve precision and layer consistency?" msgstr "" "정밀한 벽\n" "정밀한 벽을 켜면 정밀도와 레이어 일관성이 향상될 수 있다는 사실을 알고 계셨나요?" #: resources/data/hints.ini: [hint:Sandwich mode] msgid "" "Sandwich mode\n" "Did you know that you can use sandwich mode (inner-outer-inner) to improve precision and layer consistency if your model doesn't have very steep overhangs?" msgstr "" "샌드위치 모드\n" "모델에 가파른 오버행이 없는 경우 샌드위치 모드(내부-외부-내부)를 사용하여 정밀도와 레이어 일관성을 향상시킬 수 있다는 것을 알고 계셨나요?" #: resources/data/hints.ini: [hint:Chamber temperature] msgid "" "Chamber temperature\n" "Did you know that OrcaSlicer supports chamber temperature?" msgstr "" "챔버 온도\n" "OrcaSlicer가 챔버 온도 설정을 지원한다는 사실을 알고 계셨나요?" #: resources/data/hints.ini: [hint:Calibration] msgid "" "Calibration\n" "Did you know that calibrating your printer can do wonders? Check out our beloved calibration solution in OrcaSlicer." msgstr "" "보정\n" "프린터를 보정하면 놀라운 효과를 얻을 수 있다는 사실을 알고 계셨나요? 많은 사랑을 받고 있는 OrcaSlicer의 보정 솔루션을 확인해 보세요." #: resources/data/hints.ini: [hint:Auxiliary fan] msgid "" "Auxiliary fan\n" "Did you know that OrcaSlicer supports Auxiliary part cooling fan?" msgstr "" "보조 팬\n" "오르카슬라이서가 보조 부품 냉각 팬을 지원한다는 사실을 알고 계셨나요?" #: resources/data/hints.ini: [hint:Air filtration] msgid "" "Air filtration/Exhaust Fan\n" "Did you know that OrcaSlicer can support Air filtration/Exhaust Fan?" msgstr "" "공기 여과/배기 팬\n" "오르카 슬라이서가 공기 여과/배기 팬을 지원한다는 사실을 알고 계셨나요?" #: resources/data/hints.ini: [hint:G-code window] msgid "" "G-code window\n" "You can turn on/off the G-code window by pressing the C key." msgstr "" "Gcode 창\n" "C 키를 눌러 Gcode 창을 켜거나 끌 수 있습니다." #: resources/data/hints.ini: [hint:Switch workspaces] msgid "" "Switch workspaces\n" "You can switch between Prepare and Preview workspaces by pressing the Tab key." msgstr "" "작업 공간 전환\n" "Tab 키를 눌러 준비 작업 공간과 미리 보기 작업 공간 사이를 전환할 수 있습니다." #: resources/data/hints.ini: [hint:How to use keyboard shortcuts] msgid "" "How to use keyboard shortcuts\n" "Did you know that Orca Slicer offers a wide range of keyboard shortcuts and 3D scene operations?" msgstr "" "키보드 단축키를 사용하는 방법\n" "Orca Slicer는 다양한 키보드 단축키와 3D 장면 작업을 제공합니다." # AI Translated #: resources/data/hints.ini: [hint:Reverse on even] msgid "" "Reverse on even\n" "Did you know that Reverse on even feature can significantly improve the surface quality of your overhangs? However, it can cause wall inconsistencies so use carefully!" msgstr "" "짝수에 반전\n" "짝수에 반전 기능이 오버행의 표면 품질을 크게 향상시킬 수 있다는 사실을 알고 계셨나요? 다만 벽에 불일치가 생길 수 있으므로 주의해서 사용하십시오!" #: resources/data/hints.ini: [hint:Cut Tool] msgid "" "Cut Tool\n" "Did you know that you can cut a model at any angle and position with the cutting tool?" msgstr "" "절단 도구\n" "절단 도구로 원하는 각도와 위치에서 모델을 자를 수 있다는 사실을 알고 계셨나요?" #: resources/data/hints.ini: [hint:Fix Model] msgid "" "Fix Model\n" "Did you know that you can fix a corrupted 3D model to avoid a lot of slicing problems on the Windows system?" msgstr "" "모델 수정\n" "Windows 시스템에서 많은 슬라이싱 문제를 피하기 위해 손상된 3D 모델을 수정할 수 있다는 것을 알고 계섰나요?" #: resources/data/hints.ini: [hint:Timelapse] msgid "" "Timelapse\n" "Did you know that you can generate a timelapse video during each print?" msgstr "" "타임랩스\n" "각 출력 중에 타임랩스 비디오를 생성할 수 있다는 것을 알고 계섰나요?" #: resources/data/hints.ini: [hint:Auto-Arrange] msgid "" "Auto-Arrange\n" "Did you know that you can auto-arrange all the objects in your project?" msgstr "" "자동 정렬\n" "프로젝트의 모든 객체를 자동 정렬할 수 있다는 것을 알고 계섰나요?" #: resources/data/hints.ini: [hint:Auto-Orient] msgid "" "Auto-Orient\n" "Did you know that you can rotate objects to an optimal orientation for printing with a simple click?" msgstr "" "자동 방향 지정\n" "간단한 클릭만으로 객체를 최적의 출력 방향으로 회전할 수 있다는 것을 알고 계셨나요?" #: resources/data/hints.ini: [hint:Lay on Face] msgid "" "Lay on Face\n" "Did you know that you can quickly orient a model so that one of its faces sits on the print bed? Select the \"Place on face\" function or press the F key." msgstr "" "면에 위치\n" "모델의 바닥 표면을 빠르게 지정하여 출력 베드에 놓을 수 있다는 것을 알고 계셨나요? 면에 배치 기능을 선택하십시오. 또는F 키를 누르세요." #: resources/data/hints.ini: [hint:Object List] msgid "" "Object List\n" "Did you know that you can view all objects/parts in a list and change settings for each object/part?" msgstr "" "객체 목록\n" "목록의 모든 객체/부품을 보고 각 객체/부품에 대한 설정을 변경할 수 있다는 것을 알고 계섰나요?" #: resources/data/hints.ini: [hint:Search Functionality] msgid "" "Search Functionality\n" "Did you know that you use the Search tool to quickly find a specific Orca Slicer setting?" msgstr "" "검색 기능\n" "검색 도구를 사용하여 원하는 Orca Slicer 설정을 빠르게 찾을 수 있다는 사실을 알고 계섰나요?" #: resources/data/hints.ini: [hint:Simplify Model] msgid "" "Simplify Model\n" "Did you know that you can reduce the number of triangles in a mesh using the Simplify mesh feature? Right-click the model and select Simplify model." msgstr "" "모델 단순화\n" "메시 단순화 기능을 사용하여 메시의 삼각형 수를 줄일 수 있다는 것을 알고 계셨나요? 모델을 마우스 오른쪽 버튼으로 클릭하고 모델 단순화를 선택하세요." #: resources/data/hints.ini: [hint:Slicing Parameter Table] msgid "" "Slicing Parameter Table\n" "Did you know that you can view all objects/parts on a table and change settings for each object/part?" msgstr "" "슬라이싱 매개변수 테이블\n" "테이블의 모든 객체/부품을 보고 각 객체/부품에 대한 설정을 변경할 수 있다는 것을 알고 계섰나요?" #: resources/data/hints.ini: [hint:Split to Objects/Parts] msgid "" "Split to Objects/Parts\n" "Did you know that you can split a big object into small ones for easy colorizing or printing?" msgstr "" "객체/부품으로 분할\n" "쉽게 색칠하거나 출력하기 위해 큰 객체를 작은 객체로 나눌 수 있다는 것을 알고 계섰나요?" #: resources/data/hints.ini: [hint:Subtract a Part] msgid "" "Subtract a Part\n" "Did you know that you can subtract one mesh from another using the Negative part modifier? That way you can, for example, create easily resizable holes directly in Orca Slicer." msgstr "" "부품 빼기\n" "네거티브 부분 수정자를 사용하여 하나의 메시를 다른 메시에서 뺄 수 있다는 것을 알고 계섰나요? 예를 들어, 이렇게 하면 Orca Slicer에서 직접 쉽게 크기 조정이 가능한 구멍을 만들 수 있습니다." #: resources/data/hints.ini: [hint:STEP] msgid "" "STEP\n" "Did you know that you can improve your print quality by slicing a STEP file instead of an STL?\n" "Orca Slicer supports slicing STEP files, providing smoother results than a lower resolution STL. Give it a try!" msgstr "" "STEP\n" "STL 대신 STEP 파일을 슬라이싱하여 출력 품질을 향상시킬 수 있다는 사실을 알고 계섰나요?\n" "Orca Slicer는 STEP 파일 슬라이싱을 지원하며, 저해상도 STL을 사용할 때 보다 더 부드러운 결과를 얻을 수 있습니다. 시도해 보세요!" #: resources/data/hints.ini: [hint:Z seam location] msgid "" "Z seam location\n" "Did you know that you can customize the location of the Z seam, and even paint it on your print, to have it in a less visible location? This improves the overall look of your model. Check it out!" msgstr "" "Z 재봉선 위치\n" "Z 재봉선의 위치를 사용자 정의하고 출력물에 칠하여 잘 보이지 않는 위치에 배치할 수 있다는 사실을 알고 계섰나요? 이렇게 하면 모델의 전반적인 모양이 향상됩니다. 확인해 보세요!" #: resources/data/hints.ini: [hint:Fine-tuning for flow rate] msgid "" "Fine-tuning for flow rate\n" "Did you know that flow rate can be fine-tuned for even better-looking prints? Depending on the material, you can improve the overall finish of the printed model by doing some fine-tuning." msgstr "" "압출량 미세 조정\n" "더 보기 좋은 출력물을 위해 압출량을 미세 조정할 수 있다는 사실을 알고 계셨나요? 재료에 따라 약간의 미세 조정을 통해 출력된 모델의 전체적인 마감을 개선할 수 있습니다." #: resources/data/hints.ini: [hint:Split your prints into plates] msgid "" "Split your prints into plates\n" "Did you know that you can split a model that has a lot of parts into individual plates ready to print? This will simplify the process of keeping track of all the parts." msgstr "" "출력을 플레이트로 분할\n" "부품이 많은 모델을 출력할 준비가 된 개별 플레이트로 분할할 수 있다는 사실을 알고 계섰나요? 이렇게 하면 모든 부품을 추적하는 프로세스가 간소화됩니다." #: resources/data/hints.ini: [hint:Speed up your print with Adaptive Layer #: Height] msgid "" "Speed up your print with Adaptive Layer Height\n" "Did you know that you can print a model even faster by using the Adaptive Layer Height option? Check it out!" msgstr "" "적응형 레이어 높이로 출력 속도를 높이세요\n" "적응형 레이어를 사용하면 모델을 더욱 빠르게 프린트할 수 있다는 사실을 알고 계셨나요? 레이어 높이 옵션을 확인해 보세요!" #: resources/data/hints.ini: [hint:Support painting] msgid "" "Support painting\n" "Did you know that you can paint the location of your supports? This feature makes it easy to place the support material only on the sections of the model that actually need it." msgstr "" "서포트 칠하기\n" "서포트의 위치를 칠할 수 있다는 것을 알고 계섰나요? 이 기능을 사용하면 실제로 필요한 모델 부위에만 서포트 재료를 쉽게 배치할 수 있습니다." #: resources/data/hints.ini: [hint:Different types of supports] msgid "" "Different types of supports\n" "Did you know that you can choose from multiple types of supports? Tree supports work great for organic models while saving filament and improving print speed. Check them out!" msgstr "" "다양한 유형의 서포트\n" "여러 유형의 서포트 중에서 선택할 수 있다는 것을 알고 계섰나요? 트리 서포트는 필라멘트를 절약하고 출력 속도를 향상시키면서 유기 모델에 적합합니다. 확인해 보세요!" #: resources/data/hints.ini: [hint:Printing Silk Filament] msgid "" "Printing Silk Filament\n" "Did you know that Silk filament needs special consideration to print successfully? A higher temperature and lower speed are always recommended for the best results." msgstr "" "실크 필라멘트 출력\n" "실크 필라멘트를 성공적으로 출력하려면 특별한 주의가 필요하다는 사실을 알고 계셨나요? 최상의 결과를 얻으려면 항상 더 높은 온도와 더 낮은 속도를 권장합니다." #: resources/data/hints.ini: [hint:Brim for better adhesion] msgid "" "Brim for better adhesion\n" "Did you know that when printed models have a small contact interface with the printing surface, it's recommended to use a brim?" msgstr "" "접착력이 더 좋아지는 브림\n" "모델을 출력할 때 베드 표면과의 접촉면이 작을 경우 브림을 사용하는 것이 권장된다는 사실을 알고 계섰나요?" #: resources/data/hints.ini: [hint:Set parameters for multiple objects] msgid "" "Set parameters for multiple objects\n" "Did you know that you can set slicing parameters for all selected objects at once?" msgstr "" "여러 객체에 대한 매개변수 설정\n" "선택한 모든 객체에 대한 슬라이싱 매개변수를 한 번에 설정할 수 있다는 사실을 알고 계섰나요?" #: resources/data/hints.ini: [hint:Stack objects] msgid "" "Stack objects\n" "Did you know that you can stack objects as a whole one?" msgstr "" "객체 쌓기\n" "물건을 통째로 쌓을 수 있다는 사실을 알고 계섰나요?" # AI Translated #: resources/data/hints.ini: [hint:Flush into support/objects/infill] msgid "" "Flush into support/objects/infill\n" "Did you know that you can reduce wasted filament by flushing it into support/objects/infill during filament changes?" msgstr "" "서포트/객체/채우기로 플러시\n" "필라멘트를 교체하는 동안 서포트/객체/채우기로 플러시하여 낭비되는 필라멘트를 줄일 수 있다는 사실을 알고 계셨나요?" #: resources/data/hints.ini: [hint:Improve strength] msgid "" "Improve strength\n" "Did you know that you can use more wall loops and higher sparse infill density to improve the strength of the model?" msgstr "" "강도 향상\n" "더 많은 외벽과 더 높은 드문 채우기 밀도를 사용하여 모델의 강도를 높일 수 있다는 사실을 알고 계섰나요?" #: resources/data/hints.ini: [hint:When do you need to print with the printer #: door opened] msgid "" "When do you need to print with the printer door opened?\n" "Did you know that opening the printer door can reduce the probability of extruder/hotend clogging when printing lower temperature filament with a higher enclosure temperature? There is more info about this in the Wiki." msgstr "" "프린터 도어를 연 상태로 출력해야 하는 경우\n" "더 높은 프린터 내부 온도로 낮은 온도의 필라멘트를 출력할 때 프린터 도어를 열면 압출기/핫엔드가 막힐 가능성을 줄일 수 있다는 것을 알고 계섰나요? 이에 대한 자세한 내용은 Wiki에서 확인하세요." #: resources/data/hints.ini: [hint:Avoid warping] msgid "" "Avoid warping\n" "Did you know that when printing materials that are prone to warping such as ABS, appropriately increasing the heatbed temperature can reduce the probability of warping?" msgstr "" "뒤틀림 방지\n" "ABS와 같이 뒤틀림이 발생하기 쉬운 소재를 출력할 때, 히트베드 온도를 적절하게 높이면 뒤틀림 가능성을 줄일 수 있다는 사실을 알고 계셨나요?" #~ msgid "Print order within a single layer." #~ msgstr "단일 레이어 내의 출력 순서" #~ msgid "Bottom" #~ msgstr "아래" #~ msgid "Front" #~ msgstr "앞" #~ msgid "Rear" #~ msgstr "뒤" #~ msgid "Arrow Up" #~ msgstr "화살표 위로" #~ msgid "Arrow Down" #~ msgstr "화살표 아래로" #~ msgid "Arrow Left" #~ msgstr "화살표 왼쪽으로" #~ msgid "Arrow Right" #~ msgstr "화살표 오른쪽으로" #~ msgid "End" #~ msgstr "끝" #~ msgid "Hotend" #~ msgstr "핫엔드" #~ msgid "Select filament that installed to the left nozzle" #~ msgstr "왼쪽 노즐에 설치된 필라멘트를 선택합니다" #~ msgid "Select filament that installed to the right nozzle" #~ msgstr "오른쪽 노즐에 설치된 필라멘트를 선택합니다" #~ msgid "Select Filament && Hotends" #~ msgstr "필라멘트 및 핫엔드" #, c-format, boost-format #~ msgid "Note: the filament type(%s) does not match with the filament type(%s) in the slicing file. If you want to use this slot, you can install %s instead of %s and change slot information on the 'Device' page." #~ msgstr "참고: 필라멘트 유형(%s)이 슬라이싱 파일에 있는 필라멘트 유형(%s)과 일치하지 않습니다. 이 슬롯을 사용하려면 %s 대신 %s 을 설치하고 '장치' 페이지에서 슬롯 정보를 변경하면 됩니다." #, c-format, boost-format #~ msgid "Note: the slot is empty or undefined. If you want to use this slot, you can install %s and change slot information on the 'Device' page." #~ msgstr "참고: 슬롯이 비어 있거나 정의되지 않았습니다. 이 슬롯을 사용하려면 %s 을 설치하고 '장치' 페이지에서 슬롯 정보를 변경할 수 있습니다." #~ msgid "Note: Only filament-loaded slots can be selected." #~ msgstr "참고: 필라멘트가 로드된 슬롯만 선택할 수 있습니다." #~ msgid "Save the printing files initiated from Bambu Studio, Bambu Handy and MakerWorld on External Storage" #~ msgstr "Bambu Studio, Bambu Handy 및 MakerWorld에서 시작된 인쇄 파일을 외부 저장 장치에 저장" #~ msgid "The current firmware supports a maximum of 16 materials. You can either reduce the number of materials to 16 or fewer on the Preparation Page, or try updating the firmware. If you are still restricted after the update, please wait for subsequent firmware support." #~ msgstr "현재 펌웨어는 최대 16개의 재료를 지원합니다. 준비 페이지에서 재료 수를 16개 이하로 줄이거나 펌웨어를 업데이트해 보세요. 업데이트 후에도 여전히 제한이 있는 경우, 다음 펌웨어 지원이 나올 때까지 기다려 주세요." # TODO: Review, changed by lang refactor. PR 14254 #~ msgid "Click OK to update the Network plug-in the next time Orca Slicer launches." #~ msgstr "다음 Orca Slicer를 시작할 때 네트워크 플러그인을 업데이트하려면 확인을 클릭합니다." # TODO: Review, changed by lang refactor. PR 14254 #, boost-format #~ msgid "Failed to calculate line width of %1%. Cannot get value of “%2%”." #~ msgstr "%1%의 선 너비를 계산하지 못했습니다. \"%2%\"의 값을 가져올 수 없습니다 " #~ msgid "Invalid spacing supplied to Flow::with_spacing(), check your layer height and extrusion width." #~ msgstr "Flow::with_spacing()에 잘못된 간격이 제공되었습니다. 레이어 높이와 돌출 너비를 확인하세요" #~ msgid "°C" #~ msgstr "°C" #~ msgid "Continue to sync filaments" #~ msgstr "필라멘트 동기화 계속하기" #~ msgctxt "Sync_Nozzle_AMS" #~ msgid "Cancel" #~ msgstr "취소" #~ msgid "Print" #~ msgstr "출력" #~ msgid "in" #~ msgstr "인치" #~ msgid "Object coordinates" #~ msgstr "객체 좌표" #~ msgid "World coordinates" #~ msgstr "영역 좌표" #~ msgid "Translate(Relative)" #~ msgstr "이동(상대)" #~ msgid "Rotate (absolute)" #~ msgstr "회전 (절대)" #~ msgid "Part coordinates" #~ msgstr "파트 좌표" #~ msgid "Enable adaptive pressure advance for overhangs (beta)" #~ msgstr "오버행에 대한 적응형 PA 활성화(베타)" #~ msgid "Pressure advance for bridges" #~ msgstr "브릿지를 위한 PA" #~ msgid "" #~ "Pressure advance value for bridges. Set to 0 to disable.\n" #~ "\n" #~ "A lower PA value when printing bridges helps reduce the appearance of slight under extrusion immediately after bridges. This is caused by the pressure drop in the nozzle when printing in the air and a lower PA helps counteract this." #~ msgstr "" #~ "브릿지의 PA 값입니다. 비활성화하려면 0으로 설정합니다.\n" #~ "\n" #~ " 브릿지를 프린팅할 때 PA 값이 낮으면 브릿지 직후에 약간의 언더 압출이 나타나는 것을 줄이는 데 도움이 됩니다. 이는 공중에서 출력할 때 노즐의 압력 강하로 인해 발생하며 PA가 낮을수록 이를 방지하는 데 도움이 됩니다." #~ msgid "View control settings" #~ msgstr "시점 컨트롤 설정" #~ msgid "Rotate view" #~ msgstr "시점 회전" #~ msgid "Pan view" #~ msgstr "시점 이동" #~ msgid "Zoom view" #~ msgstr "시점 확대/축소" # TODO: Review, changed by lang refactor. PR 14254 #~ msgid "Reverse scroll direction while zooming" #~ msgstr "확대/축소 시 마우스 휠이 반전됩니다" #, c-format, boost-format #~ msgid "Left: %s" #~ msgstr "왼쪽: %s" #, c-format, boost-format #~ msgid "Right: %s" #~ msgstr "오른쪽: %s" #~ msgid "Enable network plug-in" #~ msgstr "네트워크 플러그인 사용" #~ msgid "Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n" #~ msgstr "오버행뿐만 아니라 동일한 기능 내에서 흐름이 변경되는 경우 적응형 PA를 활성화합니다. 이는 실험적인 옵션입니다. PA 프로파일이 정확하게 설정되지 않으면 오버행 전후의 외부 표면에 균일성 문제가 발생할 수 있습니다.\n" #~ msgid "Perform" #~ msgstr "수행" #~ msgid "Reset Rotation" #~ msgstr "회전 초기화" #~ msgid "Top Solid Layers" #~ msgstr "상부 꽉찬 레이어" #~ msgid "Add modifier" #~ msgstr "수정자 추가" #~ msgid "Bed Type" #~ msgstr "베드 유형" #~ msgid "Last Step" #~ msgstr "마지막 단계" #~ msgid "Dynamic flow Calibration" #~ msgstr "동적 압출량 교정" #~ msgid "Print with filaments mounted on the back of the chassis" #~ msgstr "섀시 뒷면에 필라멘트를 장착하여 출력" #~ msgid "Load Filament" #~ msgstr "필라멘트 넣기" #~ msgid "Filament Changes" #~ msgstr "필라멘트 변경" #~ msgid "Mirror Object" #~ msgstr "객체 반전" #~ msgid "Delete all" #~ msgstr "모두 삭제" #~ msgid "Select all" #~ msgstr "모두 선택" #~ msgid "Deselect all" #~ msgstr "모든 선택 취소" #~ msgid "Filament Settings" #~ msgstr "필라멘트 설정" #~ msgid "Detail." #~ msgstr "세부 사항." #~ msgid "Support painting" #~ msgstr "서포트 칠하기" #~ msgid "Color painting" #~ msgstr "색 칠하기" #~ msgid "Same as Global Bed Type" #~ msgstr "글로벌 베드유형과 동일" #~ msgid "Undef" #~ msgstr "정의되지 않음" #~ msgid "Undefine" #~ msgstr "알 수 없음" #~ msgid "Number of top interface layers." #~ msgstr "상단 접점 레이어 수" #~ msgid "Bed Leveling" #~ msgstr "베드 레벨링" #~ msgid "" #~ "It is recommended to assemble objects first,\n" #~ "because the objects is restriced to bed \n" #~ "and only parts can be lifted." #~ msgstr "" #~ "먼저 객체를 조립하는 것이 좋습니다.\n" #~ "객체는 베드에 고정되어 있으며\n" #~ "파트만 들어올릴 수 있습니다." #~ msgid "part selection" #~ msgstr "부품 선택" #~ msgid "°" #~ msgstr "°" #~ msgid "" #~ "The Wipe option is not available when using the Firmware Retraction mode.\n" #~ "\n" #~ "Shall I disable it in order to enable Firmware Retraction?" #~ msgstr "" #~ "노즐 청소 옵션은 펌웨어 후퇴 모드를 사용하는 경우에는 사용할 수 없습니다.\n" #~ "\n" #~ "펌웨어 후퇴를 활성화하기 위해 비활성화하겠습니까?" #~ msgid "\"G92 E0\" was found in before_layer_gcode, which is incompatible with absolute extruder addressing." #~ msgstr "\"G92 E0\"이 before_layer_gcode에서 발견되었으며 절대 압출 모드와 호환되지 않습니다." #~ msgid "\"G92 E0\" was found in layer_gcode, which is incompatible with absolute extruder addressing." #~ msgstr "\"G92 E0\"이 layer_gcode에서 발견되었으며 절대 압출 모드와 호환되지 않습니다." #, no-c-format, no-boost-format #~ msgid "Bridging angle override. If left to zero, the bridging angle will be calculated automatically. Otherwise the provided angle will be used for external bridges. Use 180° for zero angle." #~ msgstr "브릿지 출력 각도 재정의. 0°으로 두면 브릿지 출력 각도가 자동으로 계산됩니다. 그렇지 않으면 제공된 각도가 외부 브릿지 출력에 사용됩니다. 0도에는 180°를 사용합니다." #~ msgid "" #~ "Internal bridging angle override. If left to zero, the bridging angle will be calculated automatically. Otherwise the provided angle will be used for internal bridges. Use 180° for zero angle.\n" #~ "\n" #~ "It is recommended to leave it at 0 unless there is a specific model need not to." #~ msgstr "" #~ "내부 브릿지 각도 오버라이드. 0으로 두면 브릿지 각도가 자동으로 계산됩니다. 그렇지 않으면 제공된 각도가 내부 브릿지에 사용됩니다. 0 각도는 180°를 사용합니다.\n" #~ "\n" #~ "특정 모델이 필요하지 않는 한 0으로 두는 것이 좋습니다." #~ msgid "" #~ "Controls the density (spacing) of internal bridge lines. 100% means solid bridge. Default is 100%.\n" #~ "\n" #~ "Lower density internal bridges can help reduce top surface pillowing and improve internal bridge reliability as there is more space for air to circulate around the extruded bridge, improving its cooling speed.\n" #~ "\n" #~ "This option works particularly well when combined with the second internal bridge over infill option, further improving internal bridging structure before solid infill is extruded." #~ msgstr "" #~ "내부 브릿지 라인의 밀도(간격)를 제어합니다. 100%는 솔리드 브릿지를 의미합니다. 기본값은 100%입니다.\n" #~ "\n" #~ " 내부 브릿지의 밀도가 낮으면 돌출된 브릿지 주변에 공기가 순환할 수 있는 공간이 더 많아져 냉각 속도가 향상되므로 상단 표면 필링을 줄이고 내부 브릿지 안정성을 개선하는 데 도움이 됩니다.\n" #~ "\n" #~ "이 옵션은 특히 두 번째 내부 브릿지 오버 인필 옵션과 함께 사용하면 솔리드 인필이 압출되기 전에 내부 브릿지 구조를 더욱 개선할 수 있습니다." #~ msgid "" #~ "Decrease this value slightly (for example 0.9) to reduce the amount of material for bridge, to improve sag.\n" #~ "\n" #~ "The actual bridge flow used is calculated by multiplying this value with the filament flow ratio, and if set, the object's flow ratio." #~ msgstr "" #~ "이 값을 약간 낮추면(예: 0.9) 브릿지의 재질 양을 줄여 처짐을 개선할 수 있습니다.\n" #~ "\n" #~ "실제 사용되는 브릿지 압출량은 이 값에 필라멘트 압출량 비율을 곱하여 계산되며, 설정된 경우 객체의 압출량 비율을 곱합니다." #~ msgid "" #~ "This value governs the thickness of the internal bridge layer. This is the first layer over sparse infill. Decrease this value slightly (for example 0.9) to improve surface quality over sparse infill.\n" #~ "\n" #~ "The actual internal bridge flow used is calculated by multiplying this value with the bridge flow ratio, the filament flow ratio, and if set, the object's flow ratio." #~ msgstr "" #~ "이 값은 내부 브릿지 레이어의 두께를 결정합니다. 이 레이어는 스파스 인필 위에 있는 첫 번째 레이어입니다. 이 값을 약간 낮추면(예: 0.9) 스파스 인필에 대한 표면 품질을 향상시킬 수 있습니다.\n" #~ "\n" #~ "사용되는 실제 내부 브릿지 흐름은 이 값에 브릿지 흐름 비율, 필라멘트 흐름 비율, 설정된 경우 객체의 흐름 비율을 곱하여 계산됩니다." #~ msgid "If enabled, bridges are more reliable, can bridge longer distances, but may look worse. If disabled, bridges look better but are reliable just for shorter bridged distances." #~ msgstr "활성화하면 브릿지는 더 견고해지고 더 먼 거리를 생성할 수 있지만 나빠 보일 수 있습니다. 비활성화하면 브릿지가 더 좋아 보이지만 짧은 브릿지 거리에 대해서만 안정적입니다." #~ msgid "If enabled, thick internal bridges will be used. It's usually recommended to have this feature turned on. However, consider turning it off if you are using large nozzles." #~ msgstr "활성화되면 두꺼운 내부 브릿지가 사용됩니다. 일반적으로 다음을 권장합니다.이 기능을 켜두세요. 하지만 다음과 같은 경우에는 끄는 것을 고려해 보세요.큰 노즐을 사용합니다." #~ msgid "Filament to print internal sparse infill." #~ msgstr "내부 드문 채우기를 출력할 필라멘트." #~ msgid "Filament to print walls." #~ msgstr "벽을 출력하는 필라멘트" #~ msgid "Solid infill" #~ msgstr "솔리드 채우기" #~ msgid "Filament to print solid infill." #~ msgstr "솔리드 인필을 출력하는 필라멘트" #~ msgid "Filament to print support base and raft. \"Default\" means no specific filament for support and current filament is used." #~ msgstr "기본 서포트 및 라프트를 출력하기 위한 필라멘트. \"기본값\"은 지원을 위한 특정 필라멘트가 없으며 현재 필라멘트가 사용됨을 의미합니다" #~ msgid "Filament to print support interface. \"Default\" means no specific filament for support interface and current filament is used." #~ msgstr "서포트 및 라프트 접점을 출력하기 위한 필라멘트. \"기본값\"은 지원을 위한 특정 필라멘트가 없으며 현재 필라멘트가 사용됨을 의미합니다" #~ msgid "Erase all painting" #~ msgstr "모든 페인팅 삭제" #~ msgid "Reset cut" #~ msgstr "컷 재설정" #~ msgid "Swap pan and rotate mouse buttons" #~ msgstr "팬 및 회전 마우스 버튼 바꾸기" #~ msgid "If enabled, swaps the left and right mouse buttons pan and rotate functions." #~ msgstr "이 기능을 활성화하면 왼쪽 마우스 버튼과 오른쪽 마우스 버튼의 팬 및 회전 기능이 바뀝니다." #~ msgid "Remove selected points" #~ msgstr "선택한 지점 제거" #~ msgid "Remove all" #~ msgstr "모두 제거" #~ msgid "Auto-generate points" #~ msgstr "포인트 자동 생성" #~ msgid "Add a brim ear" #~ msgstr "브림 귀 추가" #~ msgid "Delete a brim ear" #~ msgstr "브림 귀 삭제" #~ msgid "Adjust section view" #~ msgstr "섹션 보기 조정" #~ msgid " invalid brim ears" #~ msgstr " 유효하지 않은 브림 귀" #~ msgid "" #~ "Reverse on odd\n" #~ "Did you know that Reverse on odd feature can significantly improve the surface quality of your overhangs?" #~ msgstr "" #~ "홀수에 반전\n" #~ "홀수에 반전 기능이 오버행의 표면 품질을 크게 향상시킬 수 있다는 사실을 알고 계셨나요?" #~ msgid "Pen size" #~ msgstr "펜 크기" #~ msgid "Pen shape" #~ msgstr "펜 모양" #~ msgid "Key 1~9" #~ msgstr "키 1~9" #~ msgid "Left click" #~ msgstr "좌 클릭" #~ msgid "Right click" #~ msgstr "우 클릭" #~ msgid "Select feature" #~ msgstr "기능 선택" #~ msgid "Based on PrusaSlicer and BambuStudio" #~ msgstr "PrusaSlicer와 BambuStudio 기반" #~ msgid "Object/Part Setting" #~ msgstr "객체/부품 설정" #~ msgid "OrcaSlicer is based on BambuStudio, PrusaSlicer, and SuperSlicer." #~ msgstr "Orca Slicer는 BambuStudio, PrusaSlicer 및 SuperSlicer를 기반으로 합니다." #~ msgid "BambuStudio is originally based on PrusaSlicer by PrusaResearch." #~ msgstr "BambuStudio는 PrusaResearch의 PrusaSlicer를 기반으로 합니다." #~ msgid "PrusaSlicer is originally based on Slic3r by Alessandro Ranellucci." #~ msgstr "PrusaSlicer는 Alessandro Ranellucci의 Slic3r을 기반으로 합니다." #~ msgid "Slic3r was created by Alessandro Ranellucci with the help of many other contributors." #~ msgstr "Slic3r은 Alessandro Ranellucci가 다른 많은 기여자들의 도움을 받아 만들었습니다." #~ msgid "Actual Speed: " #~ msgstr "실제 속도: " #~ msgid "Mouse wheel:" #~ msgstr "마우스 휠:" #~ msgid "Pass 1" #~ msgstr "1차 테스트" #~ msgid "Flow ratio test - Pass 1" #~ msgstr "압출량 비율 테스트 - 1차" #~ msgid "Pass 2" #~ msgstr "2차 테스트" #~ msgid "Flow ratio test - Pass 2" #~ msgstr "압출량 비율 테스트 - 2차" #~ msgid "Orca YOLO flowratio calibration, 0.01 step" #~ msgstr "Orca YOLO 압출량 비율 보정, 0.01 단계" #~ msgid "YOLO (perfectionist version)" #~ msgstr "YOLO (완벽주의자 버전)" #~ msgid "Orca YOLO flowratio calibration, 0.005 step" #~ msgstr "Orca YOLO 압출량 비율 보정, 0.005 단계" #~ msgid "Retraction test" #~ msgstr "후퇴 테스트" #~ msgid "Tutorial" #~ msgstr "설명서" #~ msgid "Calibration help" #~ msgstr "교정 도움말" #~ msgid "" #~ "Do you want to synchronize your personal data from Bambu Cloud?\n" #~ "It contains the following information:\n" #~ "1. The Process presets\n" #~ "2. The Filament presets\n" #~ "3. The Printer presets" #~ msgstr "" #~ "뱀부 클라우드의 개인 데이터를 동기화하시겠습니까?\n" #~ "다음과 같은 정보가 포함되어 있습니다:\n" #~ "1. 프로세스 사전 설정\n" #~ "2. 필라멘트 사전 설정\n" #~ "3. 프린터 사전 설정" #~ msgid "Show/Hide advanced parameters" #~ msgstr "고급 매개변수 표시/숨기기" #~ msgid "\"Fix Model\" feature is currently only on Windows. Please repair the model on Orca Slicer(windows) or CAD softwares." #~ msgstr "\"모델 수리\" 기능은 현재 Windows에만 있습니다. Orca Slicer(Wndows) 또는 CAD 소프트웨어 등에서 모델을 수정하세요." #~ msgid "This stops the transmission of data to Bambu's cloud services. Users who don't use BBL machines or use LAN mode only can safely turn on this function." #~ msgstr "이 기능은 뱀부의 클라우드 서비스로의 데이터 전송을 중지합니다. BBL 머신을 사용하지 않거나 LAN 모드만 사용하는 사용자는 이 기능을 안전하게 켤 수 있습니다." #~ msgid "Saving objects into the 3MF failed." #~ msgstr "객체를 3mf에 저장하지 못했습니다." #~ msgid "Only Windows 10 is supported." #~ msgstr "윈도우 10만 지원합니다." #~ msgid "Failed to initialize the WinRT library." #~ msgstr "WinRT 라이브러리를 초기화하지 못했습니다." #~ msgid "Exporting objects" #~ msgstr "객체 내보내는 중" #~ msgid "Failed loading objects." #~ msgstr "객체를 로드하지 못했습니다." #~ msgid "Repairing object by Windows service" #~ msgstr "Windows 서비스로 객체 수리 중" #~ msgid "Repair failed." #~ msgstr "수리에 실패하였습니다." #~ msgid "Loading repaired objects" #~ msgstr "수리된 객체 로드" #~ msgid "Exporting 3MF file failed" #~ msgstr "3mf 파일 내보내기 실패" #~ msgid "Import 3MF file failed" #~ msgstr "3mf 파일 가져오기 실패" #~ msgid "Repaired 3MF file does not contain any object" #~ msgstr "수리된 3MF 파일에 객체가 없습니다" #~ msgid "Repaired 3MF file contains more than one object" #~ msgstr "수리된 3MF 파일에 둘 이상의 객체가 포함되어 있습니다" #~ msgid "Repaired 3MF file does not contain any volume" #~ msgstr "수리된 3MF 파일에 부피가 없습니다" #~ msgid "Repaired 3MF file contains more than one volume" #~ msgstr "수리된 3MF 파일에 둘 이상의 부피가 포함되어 있습니다" #~ msgid "" #~ "The direction which the wall loops are extruded when looking down from the top.\n" #~ "\n" #~ "By default all walls are extruded in counter-clockwise, unless Reverse on even is enabled. Set this to any option other than Auto will force the wall direction regardless of the Reverse on even.\n" #~ "\n" #~ "This option will be disabled if spiral vase mode is enabled." #~ msgstr "" #~ "위에서 아래를 내려다볼 때 벽 루프가 돌출되는 방향입니다.\n" #~ "\n" #~ "기본적으로 짝수에 반전이 활성화되지 않은 한 모든 벽은 시계 반대 방향으로 돌출됩니다. Auto 이외의 옵션으로 설정하면 짝수에 반전 관계없이 벽 방향이 강제됩니다.\n" #~ "\n" #~ "나선형 꽃병 모드가 활성화된 경우 이 옵션은 비활성화됩니다." #~ msgid "" #~ "Noise type to use for fuzzy skin generation:\n" #~ "Classic: Classic uniform random noise.\n" #~ "Perlin: Perlin noise, which gives a more consistent texture.\n" #~ "Billow: Similar to perlin noise, but clumpier.\n" #~ "Ridged Multifractal: Ridged noise with sharp, jagged features. Creates marble-like textures.\n" #~ "Voronoi: Divides the surface into voronoi cells, and displaces each one by a random amount. Creates a patchwork texture." #~ msgstr "" #~ "흐릿한 피부 생성에 사용할 노이즈 유형입니다.\n" #~ "클래식: 클래식 균일 랜덤 노이즈.\n" #~ "펄린: 펄린 노이즈: 보다 일관된 텍스처를 제공하는 펄린 노이즈입니다.\n" #~ "빌로우: 펄린 노이즈와 비슷하지만 더 뭉툭합니다.\n" #~ "리지드 멀티프랙탈: 날카롭고 들쭉날쭉한 특징을 가진 리지드 노이즈입니다. 대리석과 같은 텍스처를 만듭니다.\n" #~ "보로노이: 보로노이: 표면을 보로노이 셀로 나누고 각 셀을 임의의 양만큼 이동시킵니다. 패치워크 텍스처를 만듭니다." #~ msgid "Flow Rate" #~ msgstr "압출량" #~ msgid "" #~ "Zero first layer height is invalid.\n" #~ "\n" #~ "The first layer height will be reset to 0.2." #~ msgstr "" #~ "초기 레이어 높이 0은 잘못된 값입니다.\n" #~ "\n" #~ "첫 번째 레이어 높이가 0.2로 재설정됩니다." #~ msgid "Check for Update" #~ msgstr "업데이트 확인" #~ msgid "Rotate of view" #~ msgstr "시점 회전" #~ msgid "Move of view" #~ msgstr "시점 이동" #~ msgid "Zoom of view" #~ msgstr "시점 확대" #~ msgid "Extruders count" #~ msgstr "압출기 수" #~ msgid "Missing BambuSource component registered for media playing! Please re-install BambuStudio or seek after-sales help." #~ msgstr "미디어 재생을 위해 등록된 뱀부소스 컴포넌트가 누락되었습니다! 뱀부스튜디오를 다시 설치하거나 판매 후 도움을 받으세요." #~ msgid "Line pattern of support." #~ msgstr "서포트 기본 패턴" #~ msgid "Failed to install the plug-in. Please check whether it is blocked or deleted by anti-virus software." #~ msgstr "플러그인을 설치하지 못했습니다. 안티바이러스 소프트웨어에 의해 차단 또는 삭제되었는지 확인하세요." #~ msgid "travel" #~ msgstr "이동" #~ msgid "Replace with STL" #~ msgstr "STL 파일로 교체" #~ msgid "Replace the selected part with new STL" #~ msgstr "선택한 부품을 새 STL 파일로 교체" #~ msgid "Loading G-code" #~ msgstr "Gcode 불러오는 중" #~ msgid "Generating geometry vertex data" #~ msgstr "기하학 정점 데이터 생성" #~ msgid "Generating geometry index data" #~ msgstr "기하학 색인 데이터 생성" #~ msgid "Switch to silent mode" #~ msgstr "무음 모드로 전환" #~ msgid "Switch to normal mode" #~ msgstr "일반 모드로 전환" #~ msgid "The application cannot run normally because OpenGL version is lower than 2.0.\n" #~ msgstr "OpenGL 버전이 2.0보다 낮기 때문에 응용 프로그램을 정상적으로 실행할 수 없습니다.\n" #~ msgid "Nozzle Type" #~ msgstr "노즐 유형" #~ msgid "Advance" #~ msgstr "전문가 모드" #~ msgid "Filament shrinkage will not be used because filament shrinkage for the used filaments differs significantly." #~ msgstr "사용된 필라멘트의 필라멘트 수축이 크게 다르기 때문에 필라멘트 수축은 사용되지 않습니다." #~ msgid "" #~ "Controls the density (spacing) of external bridge lines. 100% means solid bridge. Default is 100%.\n" #~ "\n" #~ "Lower density external bridges can help improve reliability as there is more space for air to circulate around the extruded bridge, improving its cooling speed." #~ msgstr "" #~ "외부 브릿지 라인의 밀도(간격)를 제어합니다. 100%는 솔리드 브릿지를 의미합니다. 기본값은 100%입니다.\n" #~ "\n" #~ "밀도가 낮은 외부 브릿지는 돌출된 브릿지 주변에 공기가 순환할 수 있는 공간이 더 많아져 냉각 속도가 향상되므로 안정성을 개선하는 데 도움이 될 수 있습니다." # TODO: Review, changed by lang refactor. PR 14254 #, no-c-format, no-boost-format #~ msgid "" #~ "Enter the shrinkage percentage that the filament will get after cooling (94% if you measure 94mm instead of 100mm). The part will be scaled in XY to compensate. Only the filament used for the perimeter is taken into account.\n" #~ "Be sure to allow enough space between objects, as this compensation is done after the checks." #~ msgstr "" #~ "냉각 후 필라멘트가 얻게 될 수축률을 입력합니다(100mm 대신 94mm를 측정하는 경우 94%). 출력물은 xy 방향으로 보정됩니다. 외벽에 사용되는 필라멘트에만 적용됩니다.\n" #~ "이 보정은 확인 후 수행되므로 객체 사이에 충분한 공간을 허용해야 합니다." #~ msgid "Acceleration of outer walls." #~ msgstr "외벽의 가속도" #~ msgid "Don't retract when the travel is in infill area absolutely. That means the oozing can't been seen. This can reduce times of retraction for complex model and save printing time, but make slicing and G-code generating slower." #~ msgstr "이동 구간이 채우기 영역에 있을 때 수축하지 마십시오. 즉, 스며드는 것을 볼 수 없습니다. 이는 복잡한 모델의 후퇴 시간을 줄이고 출력 시간을 절약할 수 있지만 슬라이싱 및 Gcode 생성 속도를 느리게 만듭니다" #~ msgid "downward machines check" #~ msgstr "하향 머신 점검" #~ msgid "check whether current machine downward compatible with the machines in the list." #~ msgstr "현재 머신이 목록에 있는 머신과 하위 호환되는지 확인합니다." #~ msgid "Connecting to printer" #~ msgstr "프린터에 연결 중" #~ msgid "Ok" #~ msgstr "확인" #~ msgid "Adaptive layer height" #~ msgstr "적응형 레이어 높이" #~ msgid "Enabling this option means the height of tree support layer except the first will be automatically calculated." #~ msgstr "이 옵션을 활성화하면 첫 번째 레이어를 제외한 트리 서포트의 레이어 높이가 자동으로 계산됩니다 " #~ msgid "AMS not connected" #~ msgstr "AMS가 연결되지 않음" #~ msgid "Ext Spool" #~ msgstr "외부 스풀" #~ msgid "Guide" #~ msgstr "가이드" #~ msgid "Calibrating AMS..." #~ msgstr "AMS 교정 중..." #~ msgid "A problem occurred during calibration. Click to view the solution." #~ msgstr "교정하는 동안 문제가 발생했습니다. 솔루션을 보려면 클릭하세요." #~ msgid "Calibrate again" #~ msgstr "재교정" #~ msgid "Cancel calibration" #~ msgstr "교정 취소" #~ msgid "Feed Filament" #~ msgstr "필라멘트 공급" #~ msgid "An SD card needs to be inserted before printing via LAN." #~ msgstr "LAN을 통해 출력하기 전에 SD 카드를 삽입해야 합니다." #~ msgid "An SD card needs to be inserted before sending to printer." #~ msgstr "프린터로 전송 전에 SD 카드를 삽입해야 합니다." #~ msgid "Note: Only the AMS slots loaded with the same material type can be selected." #~ msgstr "참고: 동일한 재료 유형으로 장착된 AMS 슬롯만 선택할 수 있습니다." #~ msgid "" #~ "If there are two identical filaments in AMS, AMS filament backup will be enabled.\n" #~ "(Currently supporting automatic supply of consumables with the same brand, material type, and color)" #~ msgstr "" #~ "AMS에 두 개의 동일한 필라멘트가 있는 경우 AMS 필라멘트 백업이 활성화됩니다.\n" #~ "(현재 동일한 브랜드, 재질, 색상의 소모품 자동 공급 지원)" #~ msgid "The AMS will estimate Bambu filament's remaining capacity after the filament info is updated. During printing, remaining capacity will be updated automatically." #~ msgstr "AMS는 필라멘트 정보가 업데이트된 후 뱀부 필라멘트의 잔여 용량을 추정할 것입니다. 출력하는 동안 남은 용량이 자동으로 업데이트됩니다." # TODO: Review, changed by lang refactor. PR 14254 #~ msgid "The recommended minimum temperature is less than 190℃ or the recommended maximum temperature is greater than 300℃.\n" #~ msgstr "권장 최저 온도는 190도 미만 또는 권장 최고 온도는 300도 이상입니다.\n" #~ msgid "Spiral mode only works when wall loops is 1, support is disabled, top shell layers is 0, sparse infill density is 0 and timelapse type is traditional." #~ msgstr "나선형 모드는 벽 루프 1, 서포트 비활성화, 상단 셸 레이어 0, 드문 채우기 밀도 0, 타임랩스 유형이 기존인 경우에만 작동합니다." #~ msgid "Sweeping XY mech mode" #~ msgstr "스위핑 XY 기계 모드" #~ msgid "Paused due to filament runout" #~ msgstr "필라멘트 소진으로 일시 정지됨" #~ msgid "Heating hotend" #~ msgstr "핫엔드 가열 중" #~ msgid "Calibrating extrusion" #~ msgstr "압출 교정 중" #~ msgid "Printing was paused by the user" #~ msgstr "사용자가 출력을 일시 정지했습니다" #~ msgid "Pause of front cover falling" #~ msgstr "전면 커버 분리로 일시 정지됨" #~ msgid "Calibrating extrusion flow" #~ msgstr "압출 압출량 교정" #~ msgid "Paused due to nozzle temperature malfunction" #~ msgstr "노즐 온도 오작동으로 일시 정지됨" #~ msgid "Paused due to heat bed temperature malfunction" #~ msgstr "히트 베드 온도 오작동으로 일시 정지됨" #~ msgid "Skip step pause" #~ msgstr "단계 건너뛰기 일시중지" #~ msgid "Motor noise calibration" #~ msgstr "모터 소음 교정" #~ msgid "Paused due to AMS lost" #~ msgstr "AMS 정보 손실로 인해 일시중지됨" #~ msgid "Paused due to low speed of the heat break fan" #~ msgstr "느린 방열팬 속도로 일시중지됨" #~ msgid "Paused due to chamber temperature control error" #~ msgstr "챔버 온도 제어 오류로 인해 일시 중지됨" #~ msgid "Paused by the G-code inserted by user" #~ msgstr "사용자가 삽입한 Gcode로 인해 일시중지됨" #~ msgid "Nozzle filament covered detected pause" #~ msgstr "노즐 필라멘트가 덮여있는게 감지되어 일시중지" #~ msgid "Cutter error pause" #~ msgstr "커터 오류 일시중지" #~ msgid "First layer error pause" #~ msgstr "첫번째 레이어 오류 일시중지" #~ msgid "Nozzle clog pause" #~ msgstr "노즐 막힘 일시 중지" #~ msgid "Fatal" #~ msgstr "치명적" #~ msgid "Serious" #~ msgstr "심각한" #~ msgid "Common" #~ msgstr "일반적" #~ msgid "The current chamber temperature or the target chamber temperature exceeds 45℃. In order to avoid extruder clogging, low temperature filament (PLA/PETG/TPU) is not allowed to be loaded." #~ msgstr "현재 챔버 온도 또는 목표 챔버 온도가 45℃를 초과합니다. 압출기 막힘을 방지하기 위해 저온 필라멘트(PLA/PETG/TPU)를 로드할 수 없습니다." #~ msgid "Low temperature filament (PLA/PETG/TPU) is loaded in the extruder. In order to avoid extruder clogging, it is not allowed to set the chamber temperature above 45℃." #~ msgstr "압출기에 저온 필라멘트(PLA/PETG/TPU)가 장착되어 있습니다. 압출기 막힘을 방지하기 위해 챔버 온도를 45℃ 이상으로 설정할 수 없습니다." #~ msgid "Bambu PET-CF/PA6-CF is not supported by AMS." #~ msgstr "뱀부 PET-CF/PA6-CF는 AMS에서 지원되지 않습니다." #~ msgid "" #~ "An object is laid over the plate boundaries or exceeds the height limit.\n" #~ "Please solve the problem by moving it totally on or off the plate, and confirming that the height is within the build volume." #~ msgstr "" #~ "객체가 플레이트 경계를 넘었거나 높이 제한을 초과했습니다.\n" #~ "플레이트 위 또는 밖으로 완전히 이동시키고 높이가 빌드 출력 가능 영역 내에 있는지 확인하여 문제를 해결하세요." #~ msgid "" #~ "You can find it in \"Settings > Network > Connection code\"\n" #~ "on the printer, as shown in the figure:" #~ msgstr "" #~ "\"설정 > 네트워크 > 연결코드\"에서 확인하실 수 있습니다\n" #~ "또는 그림에 표시된 것처럼 프린터에 표시됩니다:" #~ msgid "Browsing file in SD card is not supported in current firmware. Please update the printer firmware." #~ msgstr "현재 펌웨어에서는 SD 카드의 파일 검색이 지원되지 않습니다. 프린터 펌웨어를 업데이트하세요." #~ msgid "" #~ "Please check if the SD card is inserted into the printer.\n" #~ "If it still cannot be read, you can try formatting the SD card." #~ msgstr "" #~ "프린터에 Micro SD 카드가 삽입되어 있는지 확인하세요.\n" #~ "그래도 읽을 수 없으면 카드를 포맷해 보세요." #~ msgid "Browsing file in SD card is not supported in LAN Only Mode." #~ msgstr "LAN 전용 모드에서는 SD 카드의 파일 탐색이 지원되지 않습니다." #~ msgid "Storage unavailable, insert SD card." #~ msgstr "저장소를 사용할 수 없습니다. SD 카드를 삽입하세요." #~ msgid "Cham" #~ msgstr "챔버" #~ msgid "Still unload" #~ msgstr "언로드중" #~ msgid "Still load" #~ msgstr "로드중" #~ msgid "Can't start this without SD card." #~ msgstr "SD 카드가 없으면 시작할 수 없습니다." #~ msgid "Sensitivity of pausing is" #~ msgstr "일시 정지 감도" #, c-format, boost-format #~ msgid "%.1f" #~ msgstr "%.1f" #~ msgid "No AMS filaments. Please select a printer in 'Device' page to load AMS info." #~ msgstr "AMS 필라멘트가 없습니다. AMS 정보를 불러오려면 '장치' 페이지에서 프린터를 선택하세요." #~ msgid "Sync filaments with AMS will drop all current selected filament presets and colors. Do you want to continue?" #~ msgstr "AMS와 동기화된 필라멘트는 현재 선택된 모든 필라멘트 사전 설정 및 색상을 삭제합니다. 계속하시겠습니까?" #~ msgid "Already did a synchronization, do you want to sync only changes or resync all?" #~ msgstr "이미 동기화를 수행했습니다. 변경 사항만 동기화하시겠습니까? 아니면 다시 동기화하시겠습니까?" #~ msgid "Sync" #~ msgstr "동기화" #~ msgid "Resync" #~ msgstr "재 동기화" #~ msgid "There are some unknown filaments mapped to generic preset. Please update Orca Slicer or restart Orca Slicer to check if there is an update to system presets." #~ msgstr "일반 사전 설정에 매핑된 알 수 없는 필라멘트가 있습니다. Orca Slicer를 업데이트하거나 Orca Slicer를 다시 시작하여 시스템 사전 설정에 대한 업데이트가 있는지 확인하세요." #~ msgid "" #~ "Are you sure you want to store original SVGs with their local paths into the 3MF file?\n" #~ "If you hit 'NO', all SVGs in the project will not be editable any more." #~ msgstr "" #~ "로컬 경로가 있는 원본 SVG를 3MF 파일에 저장하시겠습니까?\n" #~ "'아니요'를 누르면 프로젝트의 모든 SVG를 더 이상 편집할 수 없습니다." #~ msgid "Private protection" #~ msgstr "개인정보 보호" #~ msgid "General Settings" #~ msgstr "일반 설정" #~ msgid "Show \"Tip of the day\" notification after start" #~ msgstr "시작 후 \"오늘의 팁\" 알림 표시" #~ msgid "If enabled, useful hints are displayed at startup." #~ msgstr "활성화하면 시작 시 유용한 힌트가 표시됩니다." #~ msgid "Flushing volumes: Auto-calculate every time the color changed." #~ msgstr "플러시 볼륨: 색상이 변경될 때마다 자동 계산됩니다." #~ msgid "If enabled, auto-calculate every time the color changed." #~ msgstr "활성화하면 색상이 변경될 때마다 자동 계산됩니다." #~ msgid "Flushing volumes: Auto-calculate every time when the filament is changed." #~ msgstr "플러싱량: 필라멘트가 교체될 때마다 자동 계산됩니다." #~ msgid "If enabled, auto-calculate every time when filament is changed" #~ msgstr "활성화하면 필라멘트가 교체될 때마다 자동 계산됩니다" #~ msgid "Auto arrange plate after object cloning" #~ msgstr "객체를 복제한 후 플레이트를 자동으로 정렬합니다" #~ msgid "Network" #~ msgstr "네트워크" #~ msgid "User Sync" #~ msgstr "사용자 동기화" #~ msgid "System Sync" #~ msgstr "시스템 동기화" #~ msgid "Associate URLs to OrcaSlicer" #~ msgstr "OrcaSlicer에 URL 연결" #~ msgid "every" #~ msgstr "매번" #~ msgid "Downloads" #~ msgstr "다운로드" #~ msgid "Dark Mode" #~ msgstr "다크 모드" #~ msgid "Home page and daily tips" #~ msgstr "홈페이지 및 데일리 팁" #~ msgid "Show home page on startup" #~ msgstr "시작 시 홈페이지 표시" #~ msgid "Please choose the filament color" #~ msgstr "필라멘트 색상을 선택해 주세요" #~ msgid "Send print job to" #~ msgstr "출력 작업 보내기" #, c-format, boost-format #~ msgid "Filament %s exceeds the number of AMS slots. Please update the printer firmware to support AMS slot assignment." #~ msgstr "필라멘트 %s가 AMS 슬롯 수를 초과합니다. AMS 슬롯 할당을 지원하려면 프린터 펌웨어를 업데이트하세요." #~ msgid "Filament exceeds the number of AMS slots. Please update the printer firmware to support AMS slot assignment." #~ msgstr "필라멘트가 AMS 슬롯 수를 초과합니다. AMS 슬롯 할당을 지원하려면 프린터 펌웨어를 업데이트하세요." #~ msgid "Filaments to AMS slots mappings have been established. You can click a filament above to change its mapping AMS slot" #~ msgstr "AMS 슬롯 매핑에 대한 필라멘트가 설정되었습니다. 위의 필라멘트를 클릭하여 매핑 AMS 슬롯을 변경할 수 있습니다" #~ msgid "Please click each filament above to specify its mapping AMS slot before sending the print job" #~ msgstr "출력 작업을 보내기 전에 위의 각 필라멘트를 클릭하여 매핑 AMS 슬롯을 지정하세요" #~ msgid "The printer firmware only supports sequential mapping of filament => AMS slot." #~ msgstr "프린터 펌웨어는 필라멘트 => AMS 슬롯의 순차 매핑만 지원합니다." #~ msgid "An SD card needs to be inserted before printing." #~ msgstr "출력하기 전에 SD 카드를 삽입해야 합니다." #~ msgid "An SD card needs to be inserted to record timelapse." #~ msgstr "타임랩스를 녹화하려면 SD 카드를 삽입해야 합니다." #, c-format, boost-format #~ msgid "nozzle memorized: %.1f %s" #~ msgstr "기억된 노즐: %.1f %s" #~ msgid "Your nozzle diameter in sliced file is not consistent with memorized nozzle. If you changed your nozzle lately, please go to Device > Printer Parts to change settings." #~ msgstr "슬라이스 파일의 노즐 직경이 기억된 노즐과 일치하지 않습니다. 최근에 노즐을 변경한 경우 장치 > 프린터 부품으로 이동하여 설정을 변경하세요." #, c-format, boost-format #~ msgid "Printing high temperature material (%s material) with %s may cause nozzle damage" #~ msgstr "고온 재료(%s 재료)를 %s로 출력하면 노즐이 손상될 수 있습니다" #~ msgid "Connecting to the printer. Unable to cancel during the connection process." #~ msgstr "프린터에 연결 중입니다. 연결 진행 중에는 취소할 수 없습니다." #~ msgid "Caution to use! Flow calibration on Textured PEI Plate may fail due to the scattered surface." #~ msgstr "사용상의 주의! 텍스처 PEI 플레이트의 압출량 교정은 표면이 분산되어 실패할 수 있습니다." #~ msgid "Automatic flow calibration using Micro Lidar" #~ msgstr "마이크로 라이다를 사용한 자동 압출량 교정" #~ msgid "Send to Printer SD card" #~ msgstr "프린터 SD 카드로 보내기" #~ msgid "An SD card needs to be inserted before send to printer SD card." #~ msgstr "프린터 SD 카드로 보내기 전에 SD 카드를 삽입해야 합니다." #~ msgid "The printer does not support sending to printer SD card." #~ msgstr "프린터는 프린터 SD 카드로의 전송을 지원하지 않습니다." #, c-format, boost-format #~ msgid "The color count should be in range [%d, %d]." #~ msgstr "색상 개수는 [%d, %d] 범위 내에 있어야 합니다." #~ msgid "Current filament colors:" #~ msgstr "현재 필라멘트 색상:" #~ msgid "Quick set:" #~ msgstr "빠른 설정:" #~ msgid "Add consumable extruder after existing extruders." #~ msgstr "기존 압출기 뒤에 소모성 압출기를 추가합니다." #~ msgid "Cluster colors" #~ msgstr "클러스터 색상" #~ msgid "Map Filament" #~ msgstr "지도 필라멘트" #~ msgid "" #~ "Note: The color has been selected, you can choose OK \n" #~ "to continue or manually adjust it." #~ msgstr "" #~ "참고: 색상이 선택되었습니다. 확인을 누르시면\n" #~ "계속하거나 수동으로 조정할수 있습니다." #~ msgid "" #~ "Warning: The count of newly added and \n" #~ "current extruders exceeds 16." #~ msgstr "" #~ "경고: 새로 추가된 개수와\n" #~ "현재 압출기는 16개를 초과합니다." #~ msgid "Auto-Calc" #~ msgstr "자동 계산" #~ msgid "Orca would re-calculate your flushing volumes every time the filaments color changed. You could disable the auto-calculate in Orca Slicer > Preferences" #~ msgstr "Orca는 필라멘트 색상이 변경될 때마다 버리기 볼륨을 다시 계산합니다. Orca Slicer > 기본 설정에서 자동 계산을 비활성화할 수 있습니다" #~ msgid "unloaded" #~ msgstr "언로드됨" #~ msgid "loaded" #~ msgstr "로드됨" #~ msgid "Filament #" #~ msgstr "필라멘트 #" #~ msgid "From" #~ msgstr "에서" #~ msgid "To" #~ msgstr "으로" #~ msgid "Resume Printing (defects acceptable)" #~ msgstr "출력 재개(결함 허용)" #~ msgid "Resume Printing (problem solved)" #~ msgstr "출력 재개(문제 해결)" #~ msgid "Step 1. Please confirm Orca Slicer and your printer are in the same LAN." #~ msgstr "1단계. 오르카 슬라이서와 프린터가 동일한 LAN에 있는지 확인하세요." #~ msgid "Step 2. If the IP and Access Code below are different from the actual values on your printer, please correct them." #~ msgstr "2단계. 아래 IP 및 액세스 코드가 프린터의 실제 값과 다른 경우 이를 수정하세요." #~ msgid "Step 3. Please obtain the device SN from the printer side; it is usually found in the device information on the printer screen." #~ msgstr "3단계. 프린터 측에서 장치 SN을 받으세요. 일반적으로 프린터 화면의 장치 정보에서 찾을 수 있습니다." #~ msgid " is too close to others, there may be collisions when printing." #~ msgstr " 이(가) 다른 객체와 너무 가까워 출력 시 충돌이 발생 할 수 있습니다." #~ msgid "Cannot print multiple filaments which have large difference of temperature together. Otherwise, the extruder and nozzle may be blocked or damaged during printing." #~ msgstr "온도 차이가 큰 필라멘트를 여러 개 함께 출력할 수 없습니다. 그렇지 않으면 출력 중에 압출기와 노즐이 막히거나 손상될 수 있습니다" #~ msgid "Ironing angle" #~ msgstr "다림질 각도" #~ msgid "The angle ironing is done at. A negative number disables this function and uses the default method." #~ msgstr "다림질이 해당 각도에서 실행됩니다. 음수는 이 기능을 비활성화하고 기본값을 사용합니다." #~ msgid "Remove small overhangs" #~ msgstr "작은 오버행 서포트 제거" #~ msgid "Remove small overhangs that possibly need no supports." #~ msgstr "서포트가 필요하지 않은 작은 오버행에서 서포트를 제거합니다." #~ msgid "Only one of the results with the same name will be saved. Are you sure you want to overwrite the other results?" #~ msgstr "단 하나의 결과만을 같은 이름으로 저장할 수 있습니다. 다른 결과들을 덮어쓸까요?" #~ msgid "External Spool" #~ msgstr "외부 스풀" #~ msgid "" #~ "Please input valid values:\n" #~ "Start temp: <= 350\n" #~ "End temp: >= 170\n" #~ "Start temp > End temp + 5" #~ msgstr "" #~ "유효한 값을 입력하세요:\n" #~ "시작 온도: <= 350\n" #~ "종료 온도: >= 170\n" #~ "시작온도 > 종료온도 + 5)" #~ msgid "The custom printer or model is not entered, please enter it." #~ msgstr "사용자 정의 프린터 또는 모델이 입력되지 않았습니다. 입력하세요." #, c-format, boost-format #~ msgid "nozzle in preset: %s %s" #~ msgstr "미리 설정된 노즐: %s %s" #~ msgid "Your nozzle diameter in preset is not consistent with memorized nozzle diameter. Did you change your nozzle lately?" #~ msgstr "미리 설정된 노즐 직경이 기억된 노즐 직경과 일치하지 않습니다.직경. 최근에 노즐을 바꾸셨나요?" #, c-format, boost-format #~ msgid "*Printing %s material with %s may cause nozzle damage" #~ msgstr "*%s 재료를 %s로 출력하면 노즐이 손상될 수 있습니다" #~ msgid "Improve shell precision by adjusting outer wall spacing. This also improves layer consistency." #~ msgstr "외벽 간격을 조정하여 쉘 정밀도를 향상시킵니다. 이는 또한 레이어 일관성을 향상시킵니다." #~ msgid "Enable filament ramming." #~ msgstr "필라멘트 채워넣기 활성화" #~ msgid "Alt + Mouse wheel" #~ msgstr "Alt + 마우스 휠" #~ msgid "Ctrl + Mouse wheel" #~ msgstr "Ctrl + 마우스 휠" #~ msgid "Shift + Left mouse button" #~ msgstr "Shift + 마우스 왼쪽 버튼" #~ msgid "Alt + Shift + Enter" #~ msgstr "Alt + Shift + Enter" #~ msgid "Shift + Mouse move up or down" #~ msgstr "Shift + 마우스 위 or 아래" #~ msgid "Left mouse button:" #~ msgstr "마우스 왼쪽 버튼:" #~ msgid "Right mouse button:" #~ msgstr "마우스 오른쪽 버튼:" #~ msgid "Shift + Left mouse button:" #~ msgstr "Shift + 마우스 왼쪽 버튼:" #~ msgid "Shift + Right mouse button:" #~ msgstr "Shift + 마우스 오른쪽 버튼:" #~ msgid "Recent projects" #~ msgstr "최근 프로젝트" #~ msgid "Maximum recent projects" #~ msgstr "최근 프로젝트 최대 표시" #~ msgid "Maximum count of recent projects" #~ msgstr "최근 프로젝트의 최대 표시 수" #~ msgid "⌘+Shift+G" #~ msgstr "⌘+Shift+G" #~ msgid "Ctrl+Shift+G" #~ msgstr "Ctrl+Shift+G" #~ msgid "Shift+A" #~ msgstr "Shift+A" #~ msgid "Shift+Tab" #~ msgstr "Shift+Tab" #~ msgid "⌘+Any arrow" #~ msgstr "⌘+아무 화살표" #~ msgid "⌥+Left mouse button" #~ msgstr "⌥+마우스 왼쪽 버튼" #~ msgid "⌘+Left mouse button" #~ msgstr "⌘+마우스 왼쪽 버튼" #~ msgid "Ctrl+Any arrow" #~ msgstr "Ctrl+화살표" #~ msgid "Alt+Left mouse button" #~ msgstr "Alt+마우스 왼쪽 버튼" #~ msgid "Ctrl+Left mouse button" #~ msgstr "Ctrl+마우스 왼쪽 버튼" #~ msgid "Shift+Left mouse button" #~ msgstr "Shift+마우스 왼쪽 버튼" #~ msgid "Shift+Any arrow" #~ msgstr "Shift+화살표" #~ msgid "⌘+Mouse wheel" #~ msgstr "⌘+마우스 휠" #~ msgid "⌥+Mouse wheel" #~ msgstr "⌥+마우스 휠" #~ msgid "Ctrl+Mouse wheel" #~ msgstr "Ctrl+마우스 휠" #~ msgid "Alt+Mouse wheel" #~ msgstr "Alt+마우스 휠" #~ msgid "Shift+Mouse wheel" #~ msgstr "Shift+마우스 휠" #~ msgid "Set Position" #~ msgstr "위치 설정" #, boost-format #~ msgid "%1%" #~ msgstr "%1%" #~ msgid "Right click the icon to fix model object" #~ msgstr "아이콘을 마우스 우클릭하여 모델 객체를 고칩니다" #~ msgid "The target object contains only one part and cannot be split." #~ msgstr "대상 객체는 한 부품만 포함하고 있어 분할할 수 없습니다." #~ msgid "?" #~ msgstr "?" #~ msgid "/" #~ msgstr "/" #~ msgid "Color Scheme" #~ msgstr "색 구성표" #~ msgid "Percent" #~ msgstr "퍼센트" #~ msgid "720p" #~ msgstr "720p" #~ msgid "1080p" #~ msgstr "1080p" #~ msgid "More..." #~ msgstr "더보기..." #~ msgid "More calibrations" #~ msgstr "추가 교정" #~ msgid "0" #~ msgstr "0" #~ msgid "SD Card" #~ msgstr "SD 카드" #~ msgid "100%" #~ msgstr "100%" #~ msgid "No SD Card" #~ msgstr "SD 카드 없음" #~ msgid "SD Card Abnormal" #~ msgstr "SD 카드 이상" #, c-format, boost-format #~ msgid "Ejecting of device %s(%s) has failed." #~ msgstr "%s(%s) 장치를 꺼내지 못했습니다." #~ msgid "This option can be changed later in preferences, under 'Load Behaviour'." #~ msgstr "이 옵션은 나중에 환경설정에서 '로드 동작'에서 변경할 수 있습니다." #~ msgid "Invalid number" #~ msgstr "잘못된 번호" #, c-format, boost-format #~ msgid "nozzle memorized: %.2f %s" #~ msgstr "기억된 노즐: %.2f %s" #~ msgid "Bed temperature when the Cool Plate Supertack is installed. A value of 0 means the filament does not support printing on the Cool Plate SuperTack." #~ msgstr "냉각판 설치 시 베드 온도. 값 0은 필라멘트가 쿨 플레이트(슈퍼택)에 출력할 수 없음을 의미합니다." #~ msgid "Ramming settings" #~ msgstr "채워넣기 설정" #~ msgid "Profile dependencies" #~ msgstr "프로필 종속성" #~ msgid "the Configuration package is incompatible with the current APP." #~ msgstr "구성 패키지가 현재 애플리케이션과 호환되지 않습니다." #~ msgid "Total ramming time" #~ msgstr "총 채워넣기 시간" #~ msgid "Total rammed volume" #~ msgstr "총 채워넣은 부피" #~ msgid "Ramming line width" #~ msgstr "채워넣기 선 너비" #~ msgid "Ramming line spacing" #~ msgstr "채워넣기 선 간격" #~ msgid "Shift+R" #~ msgstr "Shift+R" #~ msgid "resume" #~ msgstr "재개" #~ msgid "Classic mode" #~ msgstr "클래식 모드" #~ msgid "Enable this option to use classic mode." #~ msgstr "클래식 모드를 사용하려면 이 옵션을 활성화합니다" #, no-c-format, no-boost-format #~ msgid "" #~ "Enable this option to slow down printing in areas where perimeters may have curled upwards.For example, additional slowdown will be applied when printing overhangs on sharp corners like the front of the Benchy hull, reducing curling which compounds over multiple layers.\n" #~ "\n" #~ "It is generally recommended to have this option switched on unless your printer cooling is powerful enough or the print speed slow enough that perimeter curling does not happen. If printing with a high external perimeter speed, this parameter may introduce slight artifacts when slowing down due to the large variance in print speeds. If you notice artifacts, ensure your pressure advance is tuned correctly.\n" #~ "\n" #~ "Note: When this option is enabled, overhang perimeters are treated like overhangs, meaning the overhang speed is applied even if the overhanging perimeter is part of a bridge. For example, when the perimeters are 100% overhanging, with no wall supporting them from underneath, the 100% overhang speed will be applied." #~ msgstr "" #~ "주변이 위쪽으로 말릴 수 있는 영역에서 출력 속도를 늦추려면 이 옵션을 활성화합니다. 예를 들어 벤치 선체 전면과 같이 날카로운 모서리에 오버행를 출력할 때 추가 속도 저하가 적용되어 여러 레이어에 걸쳐 합성되는 말림을 줄입니다.\n" #~ "\n" #~ " 프린터 냉각 성능이 충분히 강력하거나 출력 속도가 느려 주변 말림이 발생하지 않는 한 일반적으로 이 옵션을 켜는 것이 좋습니다. 높은 외부 주변 속도로 출력하는 경우 이 매개변수는 출력 속도의 큰 차이로 인해 속도가 느려질 때 약간의 아티팩트가 발생할 수 있습니다. 아티팩트가 발견되면 압력 진행이 올바르게 조정되었는지 확인하십시오.\n" #~ "\n" #~ "참고: 이 옵션을 활성화하면 오버행 둘레가 오버행처럼 처리됩니다. 즉, 오버행 둘레가 교량의 일부인 경우에도 오버행 속도가 적용됩니다. 예를 들어, 둘레가 100% 돌출되어 있고 아래에서 이를 지지하는 벽이 없으면 100% 돌출 속도가 적용됩니다." #~ msgid "Compatible machine" #~ msgstr "호환 장치" #~ msgid "Compatible machine condition" #~ msgstr "호환 장치 상태" #~ msgid "Compatible process profiles condition" #~ msgstr "호환 프로세스 사전설정 상태" #~ msgid "Default filament color" #~ msgstr "기본 필라멘트 색상" #~ msgid "Rotate solid infill direction" #~ msgstr "솔리드 채우기 방향 회전" #~ msgid "Rotate the solid infill direction by 90° for each layer." #~ msgstr "각 레이어에 대해 솔리드 채우기 방향을 90° 회전합니다." #~ msgid "Flow Compensation Model, used to adjust the flow for small infill areas. The model is expressed as a comma separated pair of values for extrusion length and flow correction factors, one per line, in the following format: \"1.234,5.678\"" #~ msgstr "작은 채우기 영역의 압출량을 조정하는 데 사용되는 압출량 보상 모델. 모델은 \"1.234,5.678\" 형식으로 한 줄에 하나씩 압출 길이 및 압출량 수정 계수에 대한 쉼표로 구분된 값 쌍으로 표현됩니다." #~ msgid "The highest printable layer height for the extruder. Used to limit the maximum layer height when adaptive layer height is enabled." #~ msgstr "압출기의 출력 가능한 최대 레이어 높이입니다. 사용된 값은 적응형 레이어 높이를 활성화할 때 최대 레이어 높이를 제한합니다" #~ msgid "The lowest printable layer height for the extruder. Used to limit the minimum layer height when adaptive layer height is enabled." #~ msgstr "압출기의 출력 가능한 최저 레이어 높이입니다. 사용된 값은 적응형 레이어 높이를 활성화할 때 최소 레이어 높이를 제한합니다" #~ msgid "Retract on top layer" #~ msgstr "상단 레이어에서 후퇴" #~ msgid "Force a retraction on top layer. Disabling could prevent clog on very slow patterns with small movements, like Hilbert curve." #~ msgstr "상단 레이어에 강제 후퇴를 적용합니다. 비활성화하면 힐버트 곡선과 같이 작은 움직임이 있는 매우 느린 패턴에서 막힘을 방지할 수 있습니다." #~ msgid "Some amount of material in extruder is pulled back to avoid ooze during long travel. Set zero to disable retraction" #~ msgstr "긴 이동 중에 필라멘트가 흘러나오는 것을 방지하기 위해 압출기의 일정량의 재료를 뒤로 당깁니다. 후퇴를 비활성화하려면 0을 설정하세요" #~ msgid "Speed of retractions." #~ msgstr "후퇴 속도" #~ msgid "Speed for reloading filament into extruder. Zero means same speed of retraction." #~ msgstr "필라멘트를 압출기에 다시 로드하는 속도입니다. 0은 후퇴와 동일한 속도를 의미합니다" #~ msgid "Single loop draft shield" #~ msgstr "단일 루프 드래프트 실드" #~ msgid "Limits the draft shield loops to one wall after the first layer. This is useful, on occasion, to conserve filament but may cause the draft shield to warp / crack." #~ msgstr "드래프트 실드 루프를 첫 번째 레이어 뒤의 한 벽으로 제한합니다. 이 방법은 필라멘트를 보존하는 데 유용하지만 드래프트 실드가 휘어지거나 갈라질 수 있습니다." #~ msgid "Spacing of interface lines. Zero means solid interface." #~ msgstr "상단 접점 선의 간격. 0은 꽉찬 접점을 의미합니다" #~ msgid "Prevent transitioning back and forth between one extra wall and one less. This margin extends the range of extrusion widths which follow to [Minimum wall width - margin, 2 * Minimum wall width + margin]. Increasing this margin reduces the number of transitions, which reduces the number of extrusion starts/stops and travel time. However, large extrusion width variation can lead to under- or overextrusion problems. It's expressed as a percentage over nozzle diameter" #~ msgstr "출력물의 벽 두께를 한 번 두껍게 한 다음 다시 한 번 더 얇게 하는 것을 방지합니다. 이 마진은 다음의 범위로 압출 너비를 확장합니다: [최소 벽 너비 - 마진, 2 * 최소 벽 너비 + 마진]. 이 마진이 증가하면 변환 횟수가 줄어들어 압출 시작/중지 횟수와 이동 시간이 줄어듭니다. 그러나, 큰 압출 너비 변동은 압출 과다 또는 압출 과소 문제를 일으킬 수 있습니다. 노즐 직경을 기준으로 백분율로 표시됩니다" # TODO: Review, changed by lang refactor. PR 14254 #~ msgid "Minimum thickness of thin features. Model features that are thinner than this value will not be printed, while features thicker than this value will be widened to the minimum wall width. It's expressed as a percentage over nozzle diameter." #~ msgstr "얇은 형상의 최소 두께. 이 값보다 얇은 모델 형상은 출력되지 않으며, 최소 형상 크기보다 두꺼운 형상은 최소 벽 너비로 확대됩니다. 노즐 직경에 대한 백분율로 표시됩니다" #~ msgid "Load uptodate process/machine settings when using uptodate." #~ msgstr "uptodate 사용 시 최신 프로세스/프린터 설정 로드" #~ msgid "Load uptodate filament settings when using uptodate." #~ msgstr "최신 필라멘트 설정 사용 시 최신 필라멘트 설정 로드" #~ msgid "Load filament IDs for each object" #~ msgstr "각 객체에 대한 필라멘트 ID 로드" #~ msgid "" #~ "We now have added the auto-calibration for different filaments, which is fully automated and the result will be saved into the printer for future use. You only need to do the calibration in the following limited cases:\n" #~ "1. If you introduce a new filament of different brands/models or the filament is damp;\n" #~ "2. If the nozzle is worn out or replaced with a new one\n" #~ "3. If the max volumetric speed or print temperature is changed in the filament setting" #~ msgstr "" #~ "이제 다양한 필라멘트에 대한 자동 교정 기능이 추가되었습니다. 이 기능은 완전히 자동화되었으며 결과는 나중에 사용할 수 있도록 프린터에 저장됩니다. 다음과 같은 제한된 경우에만 보정을 수행해야 합니다.\n" #~ "1. 다른 브랜드/모델의 새로운 필라멘트를 도입하거나 필라멘트가 습기에 노출된 경우;\n" #~ "2. 노즐이 낡았거나 새것으로 교체한 경우\n" #~ "3. 필라멘트 설정에서 최대 압출 속도나 출력 온도가 변경된 경우." #~ msgid "step: " #~ msgstr "단계: " #~ msgid "mm/mm" #~ msgstr "mm/mm" #~ msgid "" #~ "We would rename the presets as \"Vendor Type Serial @printer you selected\".\n" #~ "To add preset for more printers, Please go to printer selection" #~ msgstr "" #~ "사전 설정의 이름을 \"선택한 공급업체 유형 직렬 @프린터\"로 변경합니다.\n" #~ "더 많은 프린터에 대한 사전 설정을 추가하려면 프린터 선택으로 이동하세요" #~ msgid "Load STL" #~ msgstr "STL 불러오기" #~ msgid "Load svg" #~ msgstr "SVG 불러오기" #~ msgid "Back Page 1" #~ msgstr "뒤 페이지 1" #~ msgid "Delete Filament" #~ msgstr "필라멘트 삭제" #~ msgid "Refresh Printers" #~ msgstr "프린터 새로 고침" #~ msgid "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height. This results in almost invisible layer lines and higher print quality but shorter print time." #~ msgstr "0.2mm 노즐의 기본 프로파일과 비교하면 레이어 높이가 더 작아서 레이어 라인이 거의 보이지 않고 출력 품질이 높아지지만 출력 시간은 단축됩니다." #~ msgid "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height. This results in minimal layer lines and higher print quality, but shorter print time." #~ msgstr "0.2mm 노즐의 기본 프로파일과 비교하면 레이어 높이가 더 작아서 레이어 라인이 최소화되고 출력 품질이 높아지지만 출력 시간은 단축됩니다." #~ msgid "It has a very big layer height. This results in very apparent layer lines, low print quality and general print time." #~ msgstr "레이어 높이가 매우 커서 레이어 선이 매우 뚜렷하고 출력 품질이 낮으며 일반적인 출력 시간이 소요됩니다." #~ msgid "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height. This results in very apparent layer lines and much lower print quality but shorter print time in some cases." #~ msgstr "0.8mm 노즐의 기본 프로파일과 비교하면 레이어 높이가 더 크고 레이어 라인이 매우 뚜렷해지고 출력 품질이 훨씬 낮아지지만 일부 출력의 경우 출력 시간이 짧아집니다." #~ msgid "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger layer height. This results in extremely apparent layer lines and much lower print quality but much shorter print time in some cases." #~ msgstr "0.8mm 노즐의 기본 프로파일과 비교하면 레이어 높이가 훨씬 더 크고 레이어 라인이 매우 뚜렷해지고 출력 품질이 훨씬 낮아지지만 일부 출력의 경우 출력 시간이 훨씬 짧아집니다." #~ msgid "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer height. This results in less but still apparent layer lines and slightly higher print quality, but longer print time in some cases." #~ msgstr "0.8mm 노즐의 기본 프로파일과 비교하면 레이어 높이가 더 작아서 레이어 선은 적지만 여전히 뚜렷하고 출력 품질은 약간 높지만 일부 출력의 경우 출력 시간이 길어집니다." #~ msgid "Connection to Flashforge is working correctly." #~ msgstr "플래시포지 연결이 정상적으로 작동합니다." #~ msgid "Could not connect to Flashforge" #~ msgstr "플래시포지 연결할 수 없음" #~ msgid "Set the brim type to \"painted\"" #~ msgstr "브림 유형을 “페인트”로 설정합니다." #~ msgid "" #~ "We have added an experimental style \"Tree Slim\" that features smaller support volume but weaker strength.\n" #~ "We recommend using it with: 0 interface layers, 0 top distance, 2 walls." #~ msgstr "" #~ "서포트 부피는 작지만 강도는 약한 것이 특징인 실험적 모양 \"얇은 트리\"를 추가했습니다.\n" #~ "접점 레이어 0, 상단 Z 거리 0, 벽 루프 2 와 함께 사용하는 것이 좋습니다." #~ msgid "For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the following settings: at least 2 interface layers, at least 0.1mm top z distance or using support materials on interface." #~ msgstr "\"강한 트리\" 및 \"혼합 트리\" 모양의 경우 최소 접점 레이어 2, 상단 Z 거리 0.1 또는 접점에서 서포트 재료를 사용하는 설정을 권장합니다." #~ msgid "Branch Diameter with double walls" #~ msgstr "이중 벽이 있는 가지 직경" #~ msgid "Branches with area larger than the area of a circle of this diameter will be printed with double walls for stability. Set this value to zero for no double walls." #~ msgstr "이 직경의 원 면적보다 더 큰 면적을 가진 가지는 안정성을 위해 이중벽으로 출력됩니다. 이중벽을 허용하지 않으려면 이 값을 0으로 설정합니다." #~ msgid "This setting specify the count of walls around support" #~ msgstr "이 설정은 서포트 주변의 벽 수를 지정합니다" #, c-format, boost-format #~ msgid "Support: generate toolpath at layer %d" #~ msgstr "서포트: 레이어 %d에서 툴 경로 생성" #~ msgid "Support: detect overhangs" #~ msgstr "서포트: 돌출부 감지" #~ msgid "Support: propagate branches" #~ msgstr "서포트: 가지 증식" #~ msgid "Support: draw polygons" #~ msgstr "서포트: 폴리곤 그리기" #~ msgid "Support: generate toolpath" #~ msgstr "서포트: 툴 경로 생성" #, c-format, boost-format #~ msgid "Support: generate polygons at layer %d" #~ msgstr "서포트: 레이어 %d에서 폴리곤 생성" #, c-format, boost-format #~ msgid "Support: fix holes at layer %d" #~ msgstr "서포트: 레이어 %d의 구멍 수정" #, c-format, boost-format #~ msgid "Support: propagate branches at layer %d" #~ msgstr "서포트: 레이어 %d에서 가지 증식" #~ msgid "Current Cabin humidity" #~ msgstr "현재 기내 습도" #~ msgid "Stopped." #~ msgstr "중지됨." #, c-format, boost-format #~ msgid "Connect failed [%d]!" #~ msgstr "[%d] 연결 실패!" #~ msgid "Initialize failed (Device connection not ready)!" #~ msgstr "초기화 실패 (장치 연결 준비 안 됨)!" #~ msgid "Initialize failed (Storage unavailable, insert SD card.)!" #~ msgstr "초기화에 실패했습니다(저장소를 사용할 수 없습니다. SD 카드를 삽입하세요.)!" #, c-format, boost-format #~ msgid "Initialize failed (%s)!" #~ msgstr "(%s) 초기화 실패!" #~ msgid "LAN Connection Failed (Sending print file)" #~ msgstr "LAN 연결 실패(출력 파일 전송 중)" #~ msgid "Step 1, please confirm Orca Slicer and your printer are in the same LAN." #~ msgstr "1단계, Orca Slicer와 프린터가 동일한 네트워크에 연결되어 있는지 확인하세요." #~ msgid "Step 2, if the IP and Access Code below are different from the actual values on your printer, please correct them." #~ msgstr "2단계, 아래의 IP 및 액세스 코드가 프린터의 실제 값과 다른 경우 수정하세요." #~ msgid "Step 3: Ping the IP address to check for packet loss and latency." #~ msgstr "3단계: IP 주소를 ping하여 패킷 손실 및 대기 시간을 확인합니다." #~ msgid "Force cooling for overhang and bridge" #~ msgstr "돌출부 및 브릿지 강제 냉각" #~ msgid "Enable this option to optimize part cooling fan speed for overhang and bridge to get better cooling" #~ msgstr "냉각 향상을 위해 돌출부 및 브릿지에 대한 출력물 냉각 팬 속도를 최적화하려면 이 옵션을 활성화합니다" #~ msgid "Fan speed for overhang" #~ msgstr "돌출부 팬 속도" #~ msgid "Force part cooling fan to be this speed when printing bridge or overhang wall which has large overhang degree. Forcing cooling for overhang and bridge can get better quality for these part" #~ msgstr "돌출부 정도가 큰 브릿지나 돌출부 벽을 출력할 때 출력물 냉각 팬을 이 속도로 강제합니다. 돌출부와 브릿지를 강제 냉각하면 이러한 부품의 품질이 향상될 수 있습니다" #~ msgid "Cooling overhang threshold" #~ msgstr "돌출부 냉각 임계값" #, c-format #~ msgid "Force cooling fan to be specific speed when overhang degree of printed part exceeds this value. Expressed as percentage which indicates how much width of the line without support from lower layer. 0% means forcing cooling for all outer wall no matter how much overhang degree" #~ msgstr "출력물의 돌출부 정도가 이 값을 초과하면 냉각 팬이 특정 속도가 되도록 강제합니다. 서포트가 없는 하단 레이어 선 너비의 백분율로 표시됩니다. 0은 돌출부 정도에 관계없이 모든 외벽을 강제 냉각한다는 의미입니다" #~ msgid "Bridge infill direction" #~ msgstr "브릿지 채우기 방향" #~ msgid "Bridge density" #~ msgstr "브릿지 밀도" #~ msgid "Density of external bridges. 100% means solid bridge. Default is 100%." #~ msgstr "외부 브릿지의 밀도. 100%는 단단한 브릿지를 의미합니다. 기본값은 100%입니다." #~ msgid "" #~ "Improve shell precision by adjusting outer wall spacing. This also improves layer consistency.\n" #~ "Note: This setting will only take effect if the wall sequence is configured to Inner-Outer" #~ msgstr "" #~ "외벽 간격을 조정하여 쉘 정밀도를 향상시킵니다. 이는 또한 레이어 일관성을 향상시킵니다.\n" #~ "참고: 이 설정은 벽 시퀀스가 내부-외부로 구성된 경우에만 적용됩니다" #~ msgid "Thick bridges" #~ msgstr "두꺼운 브릿지" #~ msgid "Filter out small internal bridges (beta)" #~ msgstr "작은 내부 브릿지 필터링(베타)" #~ msgid "" #~ "This option can help reducing pillowing on top surfaces in heavily slanted or curved models.\n" #~ "\n" #~ "By default, small internal bridges are filtered out and the internal solid infill is printed directly over the sparse infill. This works well in most cases, speeding up printing without too much compromise on top surface quality.\n" #~ "\n" #~ "However, in heavily slanted or curved models especially where too low sparse infill density is used, this may result in curling of the unsupported solid infill, causing pillowing.\n" #~ "\n" #~ "Disabling this option will print internal bridge layer over slightly unsupported internal solid infill. The options below control the amount of filtering, i.e. the amount of internal bridges created.\n" #~ "\n" #~ "Filter - enable this option. This is the default behavior and works well in most cases.\n" #~ "\n" #~ "Limited filtering - creates internal bridges on heavily slanted surfaces, while avoiding creating unnecessary internal bridges. This works well for most difficult models.\n" #~ "\n" #~ "No filtering - creates internal bridges on every potential internal overhang. This option is useful for heavily slanted top surface models. However, in most cases it creates too many unnecessary bridges." #~ msgstr "" #~ "이 옵션은 심하게 기울어지거나 곡선이 있는 모델의 상단 표면이 눌리는 현상을 줄이는 데 도움이 될 수 있습니다.\n" #~ "\n" #~ "기본적으로 작은 내부 브릿지는 필터링되고 내부 솔리드 채우기는 희박한 채우기 위에 직접 출력됩니다. 이는 대부분의 경우에 잘 작동하여 상단 표면 품질을 크게 저하시키지 않고 출력 속도를 높입니다.\n" #~ "\n" #~ "그러나 특히 너무 낮은 희박 채우기 밀도가 사용되는 심하게 기울어지거나 곡선 모델에서는 지지되지 않는 고체 채우기가 말려 베개 현상이 발생할 수 있습니다.\n" #~ "\n" #~ "이 옵션을 비활성화하면 약간 지원되지 않는 내부 솔리드 채우기 위에 내부 브릿지 레이어가 출력됩니다. 아래 옵션은 필터링 양, 즉 생성된 내부 브릿지 양을 제어합니다.\n" #~ "\n" #~ "필터 - 이 옵션을 활성화합니다. 이는 기본 동작이며 대부분의 경우 잘 작동합니다.\n" #~ "\n" #~ "제한된 필터링 - 불필요한 내부 브릿지 생성을 방지하면서 심하게 기울어진 표면에 내부 브릿지를 생성합니다. 이는 대부분의 어려운 모델에 적합합니다.\n" #~ "\n" #~ "필터링 없음 - 잠재적인 모든 내부 돌출부에 내부 브릿지를 생성합니다. 이 옵션은 심하게 기울어진 상단 표면 모델에 유용합니다. 그러나 대부분의 경우 불필요한 브릿지가 너무 많이 생성됩니다." #~ msgid "" #~ "This fan speed is enforced during all support interfaces, to be able to weaken their bonding with a high fan speed.\n" #~ "Set to -1 to disable this override.\n" #~ "Can only be overridden by disable_fan_first_layers." #~ msgstr "" #~ "이 설정값은 높은 팬 속도로 접점의 결합을 약화시킬 수 있도록 모든 서포트 접점(Support interface)에 적용됩니다.\n" #~ "사용하지 않으려면 -1로 설정합니다.\n" #~ "disable_fan_first_layers로만 재정의할 수 있습니다." #~ msgid "The minimum printing speed that the printer will slow down to to attempt to maintain the minimum layer time above, when slow down for better layer cooling is enabled." #~ msgstr "더 나은 레이어 냉각을 위해 속도를 낮추는 경우 위의 최소 레이어 시간을 유지하기 위해 프린터가 느려지는 최소 출력 속도입니다." #~ msgid "normal(auto) and tree(auto) is used to generate support automatically. If normal(manual) or tree(manual) is selected, only support enforcers are generated." #~ msgstr "일반(자동) 및 트리(자동)은 서포트를 자동으로 생성합니다. 일반(수동) 또는 트리(수동) 선택시에는 강제된 서포트만 생성됩니다" #~ msgid "ShiftLeft mouse button" #~ msgstr "Shift + 왼쪽 마우스 버튼" #~ msgid "Unselect" #~ msgstr "선택 취소" #~ msgid "Lift Z Enforcement" #~ msgstr "강제 Z 올리기" #~ msgid "Z-hop when retract" #~ msgstr "후퇴 시 Z 올리기" #, no-c-format, no-boost-format #~ msgid "" #~ "Number of mm the overhang need to be for the reversal to be considered useful. Can be a % of the perimeter width.\n" #~ "Value 0 enables reversal on every even layers regardless." #~ msgstr "" #~ "반전이 유용한 것으로 간주되기 위해 필요한 오버행의 수(mm)입니다. 둘레 너비의 %일 수 있습니다.\n" #~ "값 0은 관계없이 모든 짝수 레이어에서 반전을 활성화합니다." #~ msgid "Reverse on odd" #~ msgstr "홀수에 반전" #~ msgid "" #~ "Extrude perimeters that have a part over an overhang in the reverse direction on odd layers. This alternating pattern can drastically improve steep overhangs.\n" #~ "\n" #~ "This setting can also help reduce part warping due to the reduction of stresses in the part walls." #~ msgstr "" #~ "역방향 돌출부 위에 부분이 있는 돌출 둘레홀수 레이어의 방향입니다. 이 교대 패턴은 크게 향상될 수 있습니다.가파른 돌출부.\n" #~ "\n" #~ "이 설정은 또한 감소로 인한 부품 뒤틀림을 줄이는 데 도움이 될 수 있습니다.부분 벽의 응력." #~ msgid "" #~ "Apply the reverse perimeters logic only on internal perimeters.\n" #~ "\n" #~ "This setting greatly reduces part stresses as they are now distributed in alternating directions. This should reduce part warping while also maintaining external wall quality. This feature can be very useful for warp prone material, like ABS/ASA, and also for elastic filaments, like TPU and Silk PLA. It can also help reduce warping on floating regions over supports.\n" #~ "\n" #~ "For this setting to be the most effective, it is recommended to set the Reverse Threshold to 0 so that all internal walls print in alternating directions on odd layers irrespective of their overhang degree." #~ msgstr "" #~ "내부 경계에만 역방향 경계 논리를 적용합니다.\n" #~ "\n" #~ "이 설정은 부품 응력이 이제 분산되어 있으므로 부품 응력을 크게 줄여줍니다.교대 방향. 이렇게 하면 부품 뒤틀림도 줄어들고 동시에 외벽 품질 유지. 이 기능은 워프에 매우 유용할 수 있습니다.ABS/ASA와 같은 취약한 소재와 TPU 및 탄성 필라멘트에도 사용 가능실크 PLA. 또한 부동 영역의 뒤틀림을 줄이는 데 도움이 될 수 있습니다.지원합니다.\n" #~ "\n" #~ "이 설정을 가장 효과적으로 사용하려면 다음을 설정하는 것이 좋습니다.모든 내부 벽이 교대로 출력되도록 임계값을 0으로 역방향오버행 정도에 관계없이 홀수 레이어의 방향입니다." #, no-c-format, no-boost-format #~ msgid "" #~ "Number of mm the overhang need to be for the reversal to be considered useful. Can be a % of the perimeter width.\n" #~ "Value 0 enables reversal on every odd layers regardless." #~ msgstr "" #~ "반전이 유용한 것으로 간주되기 위해 필요한 오버행의 수(mm)입니다. 둘레 너비의 %일 수 있습니다.\n" #~ "값 0은 관계없이 모든 홀수 레이어에서 반전을 활성화합니다." #~ msgid "" #~ "The direction which the wall loops are extruded when looking down from the top.\n" #~ "\n" #~ "By default all walls are extruded in counter-clockwise, unless Reverse on odd is enabled. Set this to any option other than Auto will force the wall direction regardless of the Reverse on odd.\n" #~ "\n" #~ "This option will be disabled if spiral vase mode is enabled." #~ msgstr "" #~ "위에서 아래를 내려다볼 때 벽 루프가 돌출되는 방향입니다.\n" #~ "\n" #~ "홀수에 반전 설정이 활성화되지 않은 경우 기본적으로 모든 벽은 시계 반대 방향으로 출력됩니다. 이것을 Auto 이외의 옵션으로 설정하면 홀수에 반전 설정과 관계없이 벽 방향이 강제됩니다.\n" #~ "\n" #~ "나선형 꽃병 모드가 활성화된 경우 이 옵션은 비활성화됩니다." #~ msgid "" #~ "While printing by Object, the extruder may collide skirt.\n" #~ "Thus, reset the skirt layer to 1 to avoid that." #~ msgstr "" #~ "객체별 출력시 압출기가 스커트와 충돌할 수 있습니다.\n" #~ "스커트 레이어를 1로 재설정하여 이를 방지합니다." #~ msgid "" #~ "A draft shield is useful to protect an ABS or ASA print from warping and detaching from print bed due to wind draft. It is usually needed only with open frame printers, i.e. without an enclosure.\n" #~ "\n" #~ "Options:\n" #~ "Enabled = skirt is as tall as the highest printed object.\n" #~ "Limited = skirt is as tall as specified by skirt height.\n" #~ "\n" #~ "Note: With the draft shield active, the skirt will be printed at skirt distance from the object. Therefore, if brims are active it may intersect with them. To avoid this, increase the skirt distance value.\n" #~ msgstr "" #~ "드래프트 쉴드는 바람으로 인해 ABS 또는 ASA 인쇄물이 뒤틀리거나 인쇄 베드에서 분리되는 것을 방지하는 데 유용합니다. 일반적으로 오픈 프레임 프린터, 즉 인클로저가 없는 경우에만 필요합니다.\n" #~ "\n" #~ "옵션:\n" #~ "활성화됨 = 스커트가 가장 높은 인쇄물의 높이와 같습니다.\n" #~ "제한됨 = 스커트가 스커트 높이에 지정된 높이만큼 높습니다.\n" #~ "\n" #~ "참고: 드래프트 쉴드가 활성화되면 스커트는 객체로부터 스커트 거리에 인쇄됩니다. 따라서 챙이 활성화된 경우 챙과 교차할 수 있습니다. 이를 방지하려면 스커트 거리 값을 늘리십시오.\n" #~ msgid "Limited" #~ msgstr "제한됨" #~ msgid "" #~ "Adjust this value to prevent short, unclosed walls from being printed, which could increase print time. Higher values remove more and longer walls.\n" #~ "\n" #~ "NOTE: Bottom and top surfaces will not be affected by this value to prevent visual gaps on the ouside of the model. Adjust 'One wall threshold' in the Advanced settings below to adjust the sensitivity of what is considered a top-surface. 'One wall threshold' is only visible if this setting is set above the default value of 0.5, or if single-wall top surfaces is enabled." #~ msgstr "" #~ "짧고 닫히지 않은 벽이 출력되는 것을 방지하려면 이 값을 조정하십시오. 이로 인해 출력 시간이 늘어날 수 있습니다. 값이 높을수록 더 많은 벽과 긴 벽이 제거됩니다.\n" #~ "\n" #~ "참고: 모델 외부의 시각적 틈을 방지하기 위해 하단 및 상단 표면은 이 값의 영향을 받지 않습니다. 상단 표면으로 간주되는 항목의 감도를 조정하려면 아래 고급 설정에서 '벽 하나의 임계값'을 조정하세요. '하나의 벽 임계값'은 이 설정이 기본값인 0.5보다 높게 설정되거나 단일 벽 상단 표면이 활성화된 경우에만 표시됩니다." #~ msgid "Don't filter out small internal bridges (beta)" #~ msgstr "작은 내부 브릿지를 필터링하지 마세요(베타)" #~ msgid "" #~ "This option can help reducing pillowing on top surfaces in heavily slanted or curved models.\n" #~ "\n" #~ "By default, small internal bridges are filtered out and the internal solid infill is printed directly over the sparse infill. This works well in most cases, speeding up printing without too much compromise on top surface quality.\n" #~ "\n" #~ "However, in heavily slanted or curved models especially where too low sparse infill density is used, this may result in curling of the unsupported solid infill, causing pillowing.\n" #~ "\n" #~ "Enabling this option will print internal bridge layer over slightly unsupported internal solid infill. The options below control the amount of filtering, i.e. the amount of internal bridges created.\n" #~ "\n" #~ "Disabled - Disables this option. This is the default behavior and works well in most cases.\n" #~ "\n" #~ "Limited filtering - Creates internal bridges on heavily slanted surfaces, while avoiding creating unnecessary internal bridges. This works well for most difficult models.\n" #~ "\n" #~ "No filtering - Creates internal bridges on every potential internal overhang. This option is useful for heavily slanted top surface models. However, in most cases it creates too many unnecessary bridges." #~ msgstr "" #~ "이 옵션은 심하게 기울어지거나 곡선이 있는 모델의 상단 표면이 눌리는 현상을 줄이는 데 도움이 될 수 있습니다.\n" #~ "\n" #~ "기본적으로 작은 내부 브릿지는 필터링되고 내부 솔리드 채우기는 희박한 채우기 위에 직접 출력됩니다. 이는 대부분의 경우에 잘 작동하여 상단 표면 품질을 크게 저하시키지 않고 출력 속도를 높입니다.\n" #~ "\n" #~ "그러나 특히 너무 낮은 희박 채우기 밀도가 사용되는 심하게 기울어지거나 곡선 모델에서는 지지되지 않는 고체 채우기가 말려 베개 현상이 발생할 수 있습니다.\n" #~ "\n" #~ "이 옵션을 활성화하면 약간 지원되지 않는 내부 솔리드 채우기 위에 내부 브릿지 레이어가 출력됩니다. 아래 옵션은 필터링 양, 즉 생성된 내부 브릿지 양을 제어합니다.\n" #~ "\n" #~ "비활성화됨 - 이 옵션을 비활성화합니다. 이는 기본 동작이며 대부분의 경우 잘 작동합니다.\n" #~ "\n" #~ "제한된 필터링 - 불필요한 내부 브릿지 생성을 피하면서 크게 기울어진 표면에 내부 브릿지를 생성합니다. 이는 가장 어려운 모델에 적합합니다.\n" #~ "\n" #~ "필터링 없음 - 잠재적인 모든 내부 돌출부에 내부 브릿지를 생성합니다. 이 옵션은 심하게 기울어진 상단 표면 모델에 유용합니다. 그러나 대부분의 경우 불필요한 브릿지가 너무 많이 생성됩니다." #~ msgid "Shrinkage" #~ msgstr "수축" #~ msgid "" #~ "Enables gap fill for the selected surfaces. The minimum gap length that will be filled can be controlled from the filter out tiny gaps option below.\n" #~ "\n" #~ "Options:\n" #~ "1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces\n" #~ "2. Top and Bottom surfaces: Applies gap fill to top and bottom surfaces only\n" #~ "3. Nowhere: Disables gap fill\n" #~ msgstr "" #~ "선택한 표면에 대해 간격 채우기를 활성화합니다. 채워질 최소 간격 길이는 아래의 작은 간격 필터링 옵션에서 제어할 수 있습니다.\n" #~ "\n" #~ "옵션:\n" #~ "1. 어디에서나: 상단, 하단 및 내부 솔리드 표면에 간격 채우기를 적용합니다.\n" #~ "2. 상단 및 하단 표면: 상단 및 하단 표면에만 간격 채우기를 적용합니다.\n" #~ "3. 아무데도: 간격 채우기를 비활성화합니다.\n" #~ msgid "Decrease this value slightly (for example 0.9) to reduce the amount of material for bridge, to improve sag" #~ msgstr "이 값을 약간(예: 0.9) 줄여 브릿지의 압출량을 줄여 처짐을 개선합니다" #~ msgid "This value governs the thickness of the internal bridge layer. This is the first layer over sparse infill. Decrease this value slightly (for example 0.9) to improve surface quality over sparse infill." #~ msgstr "이 값은 내부 브릿지 레이어의 두께를 결정합니다. 이것은 드문 채우기 위의 첫 번째 레이어입니다. 드문 채우기보다 표면 품질을 향상시키려면 이 값을 약간(예: 0.9) 줄입니다." #~ msgid "This factor affects the amount of material for top solid infill. You can decrease it slightly to have smooth surface finish" #~ msgstr "이 값은 상단 꽉찬 내부 채우기의 재료의 양에 영향을 미칩니다. 부드러운 표면 마감을 위해 약간 줄여도 됩니다" #~ msgid "This factor affects the amount of material for bottom solid infill" #~ msgstr "이 값은 하단 꽉찬 내부 채우기의 재료의 양에 영향을 미칩니다" #~ msgid "Enable this option to slow printing down in areas where potential curled perimeters may exist" #~ msgstr "꺾여 있는 둘레가 있을 수 있는 영역에서 출력 속도를 낮추려면 이 옵션을 활성화하세요" #~ msgid "Speed of bridge and completely overhang wall" #~ msgstr "브릿지와 돌출부 벽의 속도" #~ msgid "Speed of internal bridge. If the value is expressed as a percentage, it will be calculated based on the bridge_speed. Default value is 150%." #~ msgstr "내부 브릿지 속도. 값을 백분율로 표시하면 외부 브릿지 속도를 기준으로 계산됩니다. 기본값은 150%입니다." #~ msgid "Time to load new filament when switch filament. For statistics only." #~ msgstr "필라멘트 교체 시 새 필라멘트를 넣는 시간입니다. 통계에만 사용됩니다" #~ msgid "Time to unload old filament when switch filament. For statistics only" #~ msgstr "필라멘트를 교체할 때 기존 필라멘트를 빼는 시간입니다. 통계에만 사용됩니다" #~ msgid "Time for the printer firmware (or the Multi Material Unit 2.0) to load a new filament during a tool change (when executing the T code). This time is added to the total print time by the G-code time estimator." #~ msgstr "툴 교체 중(T 코드 실행 시) 프린터 펌웨어(또는 Multi Material Unit 2.0)가 새 필라멘트를 넣는 시간입니다. 이 시간은 G코드 시간 계산기에 의해 총 출력 시간에 추가됩니다." #~ msgid "Time for the printer firmware (or the Multi Material Unit 2.0) to unload a filament during a tool change (when executing the T code). This time is added to the total print time by the G-code time estimator." #~ msgstr "툴 교체 중(T 코드 실행 시) 프린터 펌웨어(또는 Multi Material Unit 2.0)가 필라멘트를 빼는 시간입니다. 이 시간은 G코드 시간 계산기에 의해 총 출력 시간에 추가됩니다." #~ msgid "Filter out gaps smaller than the threshold specified" #~ msgstr "지정된 임계값보다 작은 간격을 필터링합니다" #~ msgid "" #~ "Enable this option for chamber temperature control. An M191 command will be added before \"machine_start_gcode\"\n" #~ "G-code commands: M141/M191 S(0-255)" #~ msgstr "" #~ "챔버 온도 제어를 위해 이 옵션을 활성화합니다. M191 명령이 \"machine_start_gcode\" 앞에 추가됩니다.\n" #~ "G코드 명령: M141/M191 S(0-255)" #~ msgid "Higher chamber temperature can help suppress or reduce warping and potentially lead to higher interlayer bonding strength for high temperature materials like ABS, ASA, PC, PA and so on. At the same time, the air filtration of ABS and ASA will get worse. While for PLA, PETG, TPU, PVA and other low temperature materials, the actual chamber temperature should not be high to avoid cloggings, so 0 which stands for turning off is highly recommended" #~ msgstr "챔버 온도가 높을수록 뒤틀림을 억제하거나 줄이는 데 도움이 될 수 있으며 잠재적으로 ABS, ASA, PC, PA 등과 같은 고온 재료의 층간 결합 강도가 높아질 수 있습니다. 동시에 ABS 및 ASA의 공기 여과는 더욱 악화됩니다. PLA, PETG, TPU, PVA 및 기타 저온 재료의 경우 막힘을 방지하려면 실제 챔버 온도가 높지 않아야 하므로 꺼짐을 의미하는 0을 적극 권장합니다" #~ msgid "Different nozzle diameters and different filament diameters is not allowed when prime tower is enabled." #~ msgstr "다른 노즐 직경과 다른 필라멘트 직경은 허용되지 않습니다.프라임 타워가 활성화되면." #~ msgid "Ooze prevention is currently not supported with the prime tower enabled." #~ msgstr "현재 프라임 타워가 활성화된 상태에서는 누출 방지가 지원되지 않습니다." #~ msgid "Interlocking depth of a segmented region. Zero disables this feature." #~ msgstr "분할된 영역의 깊이를 연동합니다. 0은 이 기능을 비활성화합니다." #~ msgid "Wipe tower extruder" #~ msgstr "닦기 타워 압출기" #~ msgid "File size exceeds the 100MB upload limit. Please upload your file through the panel." #~ msgstr "파일 크기가 업로드 제한인 100MB를 초과했습니다. 패널을 통해 파일을 업로드하세요." #~ msgid "Please input a valid value (K in 0~0.3)" #~ msgstr "유효한 값을 입력하세요(K는 0~0.3)" #~ msgid "Please input a valid value (K in 0~0.3, N in 0.6~2.0)" #~ msgstr "유효한 값을 입력하세요(K는 0~0.3, N은 0.6~2.0)" #~ msgid "PrintingPause" #~ msgstr "인쇄 일시 중지" #~ msgid "Printer local connection failed, please try again." #~ msgstr "프린터 로컬 연결에 실패했습니다. 다시 시도하세요." #~ msgid "" #~ "Please find the details of Flow Dynamics Calibration from our wiki.\n" #~ "\n" #~ "Usually the calibration is unnecessary. When you start a single color/material print, with the \"flow dynamics calibration\" option checked in the print start menu, the printer will follow the old way, calibrate the filament before the print; When you start a multi color/material print, the printer will use the default compensation parameter for the filament during every filament switch which will have a good result in most cases.\n" #~ "\n" #~ "Please note there are a few cases that will make the calibration result not reliable: using a texture plate to do the calibration; the build plate does not have good adhesion (please wash the build plate or apply gluestick!) ...You can find more from our wiki.\n" #~ "\n" #~ "The calibration results have about 10 percent jitter in our test, which may cause the result not exactly the same in each calibration. We are still investigating the root cause to do improvements with new updates." #~ msgstr "" #~ "우리 위키에서 동적 압출량 교정에 대한 자세한 내용을 찾아보세요.\n" #~ "\n" #~ "일반적으로 교정은 필요하지 않습니다. 출력 시작 메뉴에서 \"동적 압출량 교정\" 옵션을 선택한 상태에서 단일 색상/재료 출력을 시작하면 프린터는 이전 방식을 따르며 출력 전에 필라멘트를 교정합니다. 다중 색상/재료 출력을 시작하면 프린터는 모든 필라멘트 전환 중에 필라멘트에 대한 기본 보상 매개변수를 사용하므로 대부분의 경우 좋은 결과를 얻을 수 있습니다.\n" #~ "\n" #~ "교정 결과를 신뢰할 수 없게 만드는 몇 가지 경우가 있습니다. 텍스처 플레이트를 사용하여 보정을 수행합니다. 빌드 플레이트의 접착력이 좋지 않습니다. (빌드 플레이트를 세척하거나 풀을 바르십시오!) ...위키에서 자세한 내용을 확인할 수 있습니다.\n" #~ "\n" #~ "테스트에서 교정 결과에는 약 10%의 오차가 있으며, 이로 인해 각 교정에서 결과가 정확히 동일하지 않을 수 있습니다. 새로운 업데이트로 개선하기 위해 근본 원인을 계속 조사하고 있습니다." #~ msgid "Only one of the results with the same name will be saved. Are you sure you want to overrides the other results?" #~ msgstr "동일한 이름을 가진 결과 중 하나만 저장됩니다. 다른 결과에 덮어쓰겠습니까?" #, c-format, boost-format #~ msgid "There is already a historical calibration result with the same name: %s. Only one of the results with the same name is saved. Are you sure you want to overrides the historical result?" #~ msgstr "동일한 이름을 가진 교정 기록 결과가 이미 있습니다: %s. 동일한 이름의 결과 중 하나만 저장됩니다. 과거 결과에 덮어쓰겠습니까?" #~ msgid "Please find the cornor with perfect degree of extrusion" #~ msgstr "완벽한 압출각도를 가진 모서리를 찾아주세요" #~ msgid "" #~ "Order of wall/infill. When the tickbox is unchecked the walls are printed first, which works best in most cases.\n" #~ "\n" #~ "Printing walls first may help with extreme overhangs as the walls have the neighbouring infill to adhere to. However, the infill will slightly push out the printed walls where it is attached to them, resulting in a worse external surface finish. It can also cause the infill to shine through the external surfaces of the part." #~ msgstr "" #~ "벽/채우기 순서. 확인란을 선택 취소하면 벽이 먼저 출력되며 이는 대부분의 경우 가장 잘 작동합니다.\n" #~ "\n" #~ "벽에 접착할 이웃 충전재가 있으므로 벽을 먼저 출력하면 과도한 돌출부에 도움이 될 수 있습니다. 그러나 충전재는 출력된 벽이 부착된 부분을 약간 밀어내어 외부 표면 마감이 더 나빠집니다. 또한 충전재가 부품의 외부 표면을 통해 빛날 수도 있습니다." #~ msgid "Orca Slicer is based on BambuStudio by Bambulab, which is from PrusaSlicer by Prusa Research. PrusaSlicer is from Slic3r by Alessandro Ranellucci and the RepRap community" #~ msgstr "Orca Slicer는 Prusa Research의 PrusaSlicer에서 나온 뱀부랩의 BambuStudio를 기반으로 합니다. PrusaSlicer는 Alessandro Ranellucci와 RepRap 커뮤니티의 Slic3r에서 제작되었습니다" #~ msgid "Export &Configs" #~ msgstr "설정 내보내기 (&C)" #~ msgid "Over 4 systems/handy are using remote access, you can close some and try again." #~ msgstr "4개 이상의 시스템/핸디가 원격 액세스를 사용하고 있습니다. 일부 시스템을 닫고 다시 시도할 수 있습니다." #~ msgid "Infill direction" #~ msgstr "채우기 방향" #~ msgid "Enable this to get a G-code file which has G2 and G3 moves. And the fitting tolerance is same with resolution" #~ msgstr "G2 및 G3 이동(원호 기반 G코드)이 있는 G코드 파일을 가져오려면 이 기능을 활성화합니다. 피팅 공차는 해상도와 동일합니다" #~ msgid "Infill area is enlarged slightly to overlap with wall for better bonding. The percentage value is relative to line width of sparse infill" #~ msgstr "채우기 영역이 벽과 겹치도록 약간 확장되어 접착력이 향상됩니다. 드문 채우기 선 너비의 백분율 값입니다" #~ msgid "Export Configs" #~ msgstr "구성 내보내기" #~ msgid "Unload Filament" #~ msgstr "필라멘트 언로드" #~ msgid "MainBoard" #~ msgstr "메인보드" #~ msgid "active" #~ msgstr "활성화" #~ msgid "Cabin humidity" #~ msgstr "AMS 습도" #~ msgid "Green means that AMS humidity is normal, orange represent humidity is high, red represent humidity is too high.(Hygrometer: lower the better.)" #~ msgstr "녹색은 AMS 습도가 정상임을 의미하고 주황색은 습도가 높음을 나타내고 빨간색은 습도가 너무 높음을 나타냅니다.(습도계: 낮을수록 좋습니다.)" #~ msgid "Desiccant status" #~ msgstr "건조제 상태" #~ msgid "A desiccant status lower than two bars indicates that desiccant may be inactive. Please change the desiccant.(The bars: higher the better.)" #~ msgstr "건조제 상태가 두 개의 막대보다 낮을 경우 건조제가 비활성 상태일 수 있음을 나타냅니다. 건조제를 교체해 주세요.(막대: 높을수록 좋습니다.)" #~ msgid "Note: When the lid is open or the desiccant pack is changed, it can take hours or a night to absorb the moisture. Low temperatures also slow down the process. During this time, the indicator may not represent the chamber accurately." #~ msgstr "참고: 뚜껑이 열려 있거나 건조제 팩을 교체한 경우 수분을 흡수하는 데 몇 시간 또는 하룻밤이 걸릴 수 있습니다. 온도가 낮으면 흡수 속도도 느려집니다. 이 시간 동안 표시기가 챔버를 정확하게 나타내지 못할 수 있습니다." #~ msgid "Note: if new filament is inserted during printing, the AMS will not automatically read any information until printing is completed." #~ msgstr "참고: 출력 중에 새 필라멘트를 삽입하면 출력이 완료될 때까지 AMS가 자동으로 어떤 정보도 읽지 않습니다." #, boost-format #~ msgid "Succeed to export G-code to %1%" #~ msgstr "G코드를 %1%로 내보내기 성공" #~ msgid "Initialize failed (No Device)!" #~ msgstr "초기화 실패 (장치 없음)!" #~ msgid "Initialize failed (No Camera Device)!" #~ msgstr "초기화 실패 (카메라 없음)!" #~ msgid "Printer is busy downloading, Please wait for the downloading to finish." #~ msgstr "프린터가 다운로드 중입니다. 다운로드가 완료될 때까지 기다리십시오." #~ msgid "Initialize failed (Not supported on the current printer version)!" #~ msgstr "초기화 실패(현재 프린터 버전에서는 지원되지 않음)!" #~ msgid "Initialize failed (Not accessible in LAN-only mode)!" #~ msgstr "초기화 실패 (LAN 전용 모드에서는 액세스할 수 없음)!" #~ msgid "Initialize failed (Missing LAN ip of printer)!" #~ msgstr "초기화 실패 (프린터의 LAN IP 누락)!" #, c-format, boost-format #~ msgid "Stopped [%d]!" #~ msgstr "[%d] 중지됨!" #, c-format, boost-format #~ msgid "Load failed [%d]!" #~ msgstr "[%d] 로드 실패!" #, c-format, boost-format #~ msgid "No files [%d]" #~ msgstr "파일 없음 [%d]" #, c-format, boost-format #~ msgid "Load failed [%d]" #~ msgstr "로드 실패 [%d]" #~ msgid "Failed to fetching model information from printer." #~ msgstr "프린터에서 모델 정보를 가져오지 못했습니다." #~ msgid "Connection lost. Please retry." #~ msgstr "연결이 끊어졌습니다. 다시 시도해 주세요." #~ msgid "File not exists." #~ msgstr "파일이 존재하지 않습니다." #, boost-format #~ msgid "" #~ "You have changed some settings of preset \"%1%\".\n" #~ "Would you like to keep these changed settings (new value) after switching preset?" #~ msgstr "" #~ "사전 설정 \"%1%\"의 일부 설정을 변경했습니다.\n" #~ "사전 설정 전환 후 변경된 설정(새 값)을 유지하시겠습니까?" #~ msgid "" #~ "You have changed some preset settings.\n" #~ "Would you like to keep these changed settings (new value) after switching preset?" #~ msgstr "" #~ "일부 사전 설정을 변경했습니다.\n" #~ "사전 설정 전환 후 변경된 설정(새 값)을 유지하시겠습니까?" #~ msgid " ℃" #~ msgstr " ℃" #~ msgid "" #~ "Please go to filament setting to edit your presets if you need.\n" #~ "Please note that nozzle temperature, hot bed temperature, and maximum volumetric speed have a significant impact on printing quality. Please set them carefully." #~ msgstr "" #~ "필요한 경우 필라멘트 설정으로 이동하여 사전 설정을 편집하세요.\n" #~ "노즐 온도, 핫베드 온도 및 최대 체적 속도는 출력 품질에 큰 영향을 미칩니다. 신중하게 설정해 주세요." #~ msgid "Studio Version:" #~ msgstr "스튜디오 버전:" #~ msgid "Test BambuLab" #~ msgstr "테스트 뱀부랩" #~ msgid "Test BambuLab:" #~ msgstr "테스트 뱀부랩:" #~ msgid "Test HTTP" #~ msgstr "테스트 HTTP" #~ msgid "Test HTTP Service:" #~ msgstr "테스트 HTTP 서비스:" #~ msgid "Test storage" #~ msgstr "테스트 저장소" #~ msgid "Test Storage Upload:" #~ msgstr "테스트 저장소 업로드:" #~ msgid "Test storage upgrade" #~ msgstr "테스트 저장소 업그레이드" #~ msgid "Test Storage Upgrade:" #~ msgstr "테스트 저장소 업그레이드:" #~ msgid "Test storage download" #~ msgstr "테스트 저장소 다운로드" #~ msgid "Test Storage Download:" #~ msgstr "테스트 저장소 다운로드:" #~ msgid "Test plug-in download" #~ msgstr "테스트 플러그인 다운로드" #~ msgid "Test Plug-in Download:" #~ msgstr "테스트 플러그인 다운로드:" #~ msgid "Test Storage Upload" #~ msgstr "테스트 저장소 업로드" #~ msgid "" #~ "The speed setting exceeds the printer's maximum speed (machine_max_speed_x/machine_max_speed_y).\n" #~ "Orca will automatically cap the print speed to ensure it doesn't surpass the printer's capabilities.\n" #~ "You can adjust the maximum speed setting in your printer's configuration to get higher speeds." #~ msgstr "" #~ "속도 설정이 프린터의 최대 속도(machine_max_speed_x/machine_max_speed_y)를 초과합니다.\n" #~ "Orca는 인쇄 속도가 프린터의 성능을 초과하지 않도록 자동으로 제한합니다.\n" #~ "더 빠른 속도를 얻으려면 프린터 구성에서 최대 속도 설정을 조정할 수 있습니다." #~ msgid "Alternate extra wall only works with ensure vertical shell thickness disabled. " #~ msgstr "대체 추가 벽은 수직 쉘 두께 보장을 비활성화한 상태에서만 작동합니다. " #~ msgid "" #~ "Change these settings automatically?\n" #~ "Yes - Disable ensure vertical shell thickness and enable alternate extra wall\n" #~ "No - Don't use alternate extra wall" #~ msgstr "" #~ "이 설정을 자동으로 변경하시겠습니까?\n" #~ "예 - 수직 쉘 두께 확인을 비활성화하고 대체 추가 벽을 활성화합니다.\n" #~ "아니요 - 대체 추가 벽을 사용하지 마세요" #~ msgid "Add solid infill near sloping surfaces to guarantee the vertical shell thickness (top+bottom solid layers)" #~ msgstr "경사진 표면 근처에 꽉찬 내부 채우기를 추가하여 수직 쉘 두께를 보장합니다 (상단+하단 꽉찬 레이어)" #~ msgid "Text-Rotate" #~ msgstr "텍스트 회전" #~ msgid "SVG-Rotate" #~ msgstr "SVG-회전" #~ msgid "Resize" #~ msgstr "크기 조정" #~ msgid "Configuration package updated to " #~ msgstr "다음으로 업데이트된 구성 패키지 " #~ msgid "The minimum printing speed for the filament when slow down for better layer cooling is enabled, when printing overhangs and when feature speeds are not specified explicitly." #~ msgstr "보다 나은 레이어 냉각을 위해 속도를 늦출 때, 돌출부 출력 속도가 명시적으로 지정되지 않은 경우 필라멘트의 최소 출력 속도가 활성화됩니다." #~ msgid "" #~ "We would rename the presets as \"Vendor Type Serial @printer you selected\".\n" #~ "To add preset for more prinetrs, Please go to printer selection" #~ msgstr "" #~ "사전 설정의 이름을 \"선택한 공급업체 유형 직렬 @프린터\"로 변경합니다.\n" #~ "더 많은 프린터에 대한 사전 설정을 추가하려면 프린터 선택으로 이동하세요" #~ msgid "The Config cannot be loaded." #~ msgstr "구성을 로드할 수 없습니다." #~ msgid "wiki" #~ msgstr "위키" #~ msgid "Movement:" #~ msgstr "이동:" #~ msgid "Movement" #~ msgstr "이동" #~ msgid "Auto Segment" #~ msgstr "자동 분할" #~ msgid "Depth ratio" #~ msgstr "깊이 비율" #~ msgid "Prizm" #~ msgstr "원기둥" #~ msgid "connector is out of cut contour" #~ msgstr "커넥터가 잘라내기 윤곽을 벗어났습니다" #~ msgid "connectors are out of cut contour" #~ msgstr "커넥터가 잘라내기 윤곽을 벗어났습니다" #~ msgid "connector is out of object" #~ msgstr "커넥터가 객체에서 벗어났습니다" #~ msgid "connectors is out of object" #~ msgstr "커넥터가 객체에서 벗어났습니다" #~ msgid "" #~ "Invalid state.\n" #~ "No one part is selected for keep after cut" #~ msgstr "" #~ "잘못된 상태입니다.\n" #~ "절단 후 유지를 위해 선택된 부품이 없습니다" #~ msgid "Recalculate" #~ msgstr "다시계산" #~ msgid "Orca recalculates your flushing volumes every time the filament colors change. You can change this behavior in Preferences." #~ msgstr "Orca Slicer는 필라멘트 색상이 바뀔 때마다 플러싱 볼륨을 다시 계산합니다. 환경 설정에서 이 동작을 변경할 수 있습니다." #~ msgid "The printer timed out while receiving a print job. Please check if the network is functioning properly and send the print again." #~ msgstr "프린터가 인쇄 작업을 수신하는 동안 시간이 초과되었습니다.네트워크가 제대로 작동하는지 확인하고 인쇄를 다시 보내십시오." #~ msgid "The beginning of the vendor cannot be a number. Please re-enter." #~ msgstr "공급업체의 시작 부분은 숫자일 수 없습니다. 다시 입력해 주세요." #~ msgid "Edit Text" #~ msgstr "텍스트 편집" #~ msgid "Error! Unable to create thread!" #~ msgstr "오류! 스레드를 만들 수 없습니다!" #~ msgid "Exception" #~ msgstr "예외" #~ msgid "Choose SLA archive:" #~ msgstr "SLA 압축파일 선택:" #~ msgid "Import model and profile" #~ msgstr "모델과 파일 가져오기" #~ msgid "Import profile only" #~ msgstr "프로필만 가져오기" #~ msgid "Import model only" #~ msgstr "모델만 가져오기" #~ msgid "Accurate" #~ msgstr "정밀한" #~ msgid "Balanced" #~ msgstr "균형 잡힌" #~ msgid "Quick" #~ msgstr "빠른" #~ msgid "Print sequence of inner wall and outer wall. " #~ msgstr "내벽과 외벽의 순서를 인쇄합니다." #~ msgid "Order of wall/infill. false means print wall first. " #~ msgstr "벽/채우기 순서. false는 벽을 먼저 인쇄한다는 의미입니다." #~ msgid "Discribe how long the nozzle will move along the last path when retracting" #~ msgstr "퇴출 시 노즐이 마지막 경로를 따라 이동하는 거리" #~ msgid "" #~ "Simplify Model\n" #~ "Did you know that you can reduce the number of triangles in a mesh using the Simplify mesh feature? Right-click the model and select Simplify model. Read more in the documentation." #~ msgstr "" #~ "모델 단순화\n" #~ "메쉬 단순화 기능을 사용하여 메쉬의 삼각형 수를 줄일 수 있다는 사실을 알고 있습니까? 모델을 마우스 오른쪽 버튼으로 클릭하고 모델 단순화를 선택합니다. 자세한 내용은 설명서를 참조하십시오." #~ msgid "" #~ "Subtract a Part\n" #~ "Did you know that you can subtract one mesh from another using the Negative part modifier? That way you can, for example, create easily resizable holes directly in Orca Slicer. Read more in the documentation." #~ msgstr "" #~ "부품 비우기\n" #~ "네거티브 부분 수정자를 사용하여 하나의 메시를 다른 메시에서 뺄 수 있다는 것을 알고 계셨습니까? 예를 들어, 이렇게 하면 Orca Slicer에서 직접 쉽게 크기 조정이 가능한 구멍을 만들 수 있습니다. 설명서에서 자세한 내용을 읽어보세요." #~ msgid "Filling bed " #~ msgstr "베드 채우기 " #, boost-format #~ msgid "%1% infill pattern doesn't support 100%% density." #~ msgstr "%1% 내부 채우기 패턴은 100%% 밀도를 지원하지 않습니다." #~ msgid "" #~ "Switch to rectilinear pattern?\n" #~ "Yes - switch to rectilinear pattern automaticlly\n" #~ "No - reset density to default non 100% value automaticlly" #~ msgstr "" #~ "직선 패턴으로 전환하시겠습니까?\n" #~ "예 - 자동으로 직선 패턴으로 전환합니다\n" #~ "아니요 - 밀도를 기본값(100%가 아닌 값)으로 자동 재설정합니다" #~ msgid "Please heat the nozzle to above 170℃ before loading filament." #~ msgstr "필라멘트를 로드하기 전에 노즐을 170도 이상으로 가열하십시오." #~ msgid "Show G-code window" #~ msgstr "G코드 창 표시" #~ msgid "If enabled, G-code window will be displayed." #~ msgstr "활성화된 경우 G코드 창이 표시됩니다." #, c-format #~ msgid "Density of internal sparse infill, 100% means solid throughout" #~ msgstr "내부 드문 내부 채우기 밀도, 100은 전체가 꽉찬 내부 채우기임을 의미합니다" #~ msgid "Tree support wall loops" #~ msgstr "트리 서포트 벽 루프" #~ msgid "This setting specify the count of walls around tree support" #~ msgstr "이 설정은 트리 서포트의 벽 수를 지정합니다" #, c-format, boost-format #~ msgid " doesn't work at 100%% density " #~ msgstr " 100%% 밀도에서 작동하지 않음 " #~ msgid "Tool-Lay on Face" #~ msgstr "바닥면 선택 도구" #~ msgid "Export as STL" #~ msgstr "STL로 내보내기" #~ msgid "Check cloud service status" #~ msgstr "클라우드 서비스 상태 확인" #~ msgid "Please input a valid value (K in 0~0.5)" #~ msgstr "올바른 값을 입력하십시오 (K: 0~0.5)" #~ msgid "Please input a valid value (K in 0~0.5, N in 0.6~2.0)" #~ msgstr "올바른 값을 입력하십시오 (K: 0~0.5, N: 0.6~2.0)" #~ msgid "Export all objects as STL" #~ msgstr "모든 객체를 STL로 내보내기" #~ msgid "The 3MF is not compatible, load geometry data only!" #~ msgstr "이 3mf는 호환되지 않습니다. 형상 데이터만 로드합니다!" #~ msgid "Incompatible 3mf" #~ msgstr "호환되지 않는 3mf" #~ msgid "Add/Remove printers" #~ msgstr "프린터 추가/제거" #~ msgid "When print by object, machines with I3 structure will not generate timelapse videos." #~ msgstr "객체별로 출력할 때 I3 구조의 장치는 타임랩스 비디오를 생성하지 않습니다." #, c-format, boost-format #~ msgid "%s is not supported by AMS." #~ msgstr "%s은(는) AMS에서 지원하지 않습니다." #~ msgid "Don't remind me of this version again" #~ msgstr "이 버전을 다시 알리지 않음" #~ msgid "Error: IP or Access Code are not correct" #~ msgstr "오류: IP 또는 액세스 코드가 올바르지 않습니다" #~ msgid "Extrude perimeters that have a part over an overhang in the reverse direction on odd layers. This alternating pattern can drastically improve steep overhang." #~ msgstr "돌출부 위의 홀수 레이어의 둘레를 반대 방향으로 압출시킵니다. 이러한 교대 패턴은 가파른 돌출부를 대폭 개선할 수 있습니다." #~ msgid "Order of inner wall/outer wall/infil" #~ msgstr "내벽/외벽/내부 채우기 순서" #~ msgid "Print sequence of inner wall, outer wall and infill. " #~ msgstr "내벽, 외벽 및 내부 채우기 출력 순서 " #~ msgid "inner/outer/infill" #~ msgstr "내벽/외벽/내부 채우기" #~ msgid "outer/inner/infill" #~ msgstr "외벽/내벽/내부 채우기" #~ msgid "infill/inner/outer" #~ msgstr "내부 채우기/내벽/외벽" #~ msgid "infill/outer/inner" #~ msgstr "내부 채우기/외벽/내벽" #~ msgid "inner-outer-inner/infill" #~ msgstr "내벽-외벽-내벽/내부 채우기" #, c-format, boost-format #~ msgid "%%" #~ msgstr "%%" #~ msgid "Export the objects as multiple STL." #~ msgstr "객체를 여러개의 STL로 내보내기." #, boost-format #~ msgid "The selected preset: %1% was not found." #~ msgstr "선택한 사전 설정: %1%을(를) 찾을 수 없습니다." #~ msgid "" #~ "3D Scene Operations\n" #~ "Did you know how to control view and object/part selection with mouse and touchpanel in the 3D scene?" #~ msgstr "" #~ "3D 화면 작업\n" #~ "3D 화면에서 마우스와 터치패널로 보기 및 객체/부품 선택을 제어하는 방법을 알고 있습니까?" #~ msgid "Embedded" #~ msgstr "매입" #~ msgid "OrcaSlicer configuration file may be corrupted and is not abled to be parsed. Please delete the file and try again." #~ msgstr "OrcaSlicer 구성 파일이 손상되어 구문 분석할 수 없습니다. 파일을 삭제하고 다시 시도하십시오." #~ msgid "Online Models" #~ msgstr "온라인 모델" #~ msgid "Show online staff-picked models on the home page" #~ msgstr "홈페이지에서 추천 온라인 모델 보기" #~ msgid "The minimum printing speed when slow down for cooling" #~ msgstr "\"레이어 냉각 향상을 위한 감속\" 시 최소 출력 속도" #~ msgid "" #~ "There are currently no identical spare consumables available, and automatic replenishment is currently not possible.\n" #~ "(Currently supporting automatic supply of consumables with the same brand, material type, and color)" #~ msgstr "" #~ "현재 동일한 예비 소모품을 사용할 수 없으며 자동 보충도 현재 불가능합니다.\n" #~ "(현재 동일한 브랜드, 재질, 색상의 소모품 자동공급 지원)" #~ msgid "Invalid nozzle diameter" #~ msgstr "잘못된 노즐 직경" #~ msgid "The bed temperature exceeds filament's vitrification temperature. Please open the front door of printer before printing to avoid nozzle clog." #~ msgstr "베드 온도가 필라멘트의 유리화 온도를 초과합니다. 노즐 막힘을 방지하기 위해 출력하기 전에 프린터의 도어를 여십시오." #~ msgid "Activate for better air filtration" #~ msgstr "더 나은 공기 여과를 위해 활성화하세요" #~ msgid "Temperature of vitrificaiton" #~ msgstr "유리 전이 온도" #~ msgid "Material becomes soft at this temperature. Thus the heatbed cannot be hotter than this tempature" #~ msgstr "이 온도에서는 재료가 부드러워집니다. 따라서 히트베드는 유리 전이 온도보다 더 뜨거울 수 없습니다" #~ msgid "Enable this option if machine has auxiliary part cooling fan" #~ msgstr "기계에 보조 출력물 냉각 팬이 있는 경우 이 옵션 사용" #~ msgid "This option is enabled if machine support controlling chamber temperature" #~ msgstr "이 옵션은 장치가 챔버 온도 제어를 지원하는 경우 활성화됩니다" #~ msgid "Enable this if printer support air filtration" #~ msgstr "프린터가 공기 여과를 지원하는 경우 활성화하십시오" #~ msgid "Speed of auxiliary part cooling fan. Auxiliary fan will run at this speed during printing except the first several layers which is defined by no cooling layers" #~ msgstr "보조 출력 냉각 팬의 속도입니다. 냉각 중지 레이어로 정의된 처음 몇 개의 레이어를 제외하고 출력 중에 보조 팬이 이 속도로 작동됩니다" #~ msgid "Filter out gaps smaller than the threshold specified. This setting won't affect top/bottom layers" #~ msgstr "지정된 임계값보다 작은 갭을 필터링합니다. 이 설정은 상단 표면/하단 표면 레이어에 영향을 주지 않습니다" #~ msgid "Empty layers around bottom are replaced by nearest normal layers." #~ msgstr "바닥 주변의 빈 레이어는 가장 가까운 일반 레이어로 대체됩니다." #~ msgid "The model has too many empty layers." #~ msgstr "모델에 빈 레이어가 너무 많습니다." #~ msgid "Cali" #~ msgstr "교정" #~ msgid "Calibration of extrusion" #~ msgstr "압출 교정" #, c-format, boost-format #~ msgid "" #~ "Bed temperature of other layer is lower than bed temperature of initial layer for more than %d degrees Celsius.\n" #~ "This may cause model broken free from build plate during printing." #~ msgstr "" #~ "다른 레이어의 베드 온도가 초기 레이어의 베드 온도보다 %d°C 이상 낮습니다.\n" #~ "이로 인해 출력 중에 모델이 빌드 플레이트에서 탈출할 수 있습니다" #~ msgid "" #~ "Bed temperature is higher than vitrification temperature of this filament.\n" #~ "This may cause nozzle blocked and printing failure\n" #~ "Please keep the printer open during the printing process to ensure air circulation or reduce the temperature of the hot bed" #~ msgstr "" #~ "침대 온도가 이 필라멘트의 유리화 온도보다 높습니다.\n" #~ "노즐이 막히고 출력 오류가 발생할 수 있습니다\n" #~ "출력 과정 중에는 프린터를 열어두어 공기가 순환되도록 하거나 핫 베드의 온도를 낮추십시오" #~ msgid "Total Time Estimation" #~ msgstr "추정 시간 합계" #~ msgid "Resonance frequency identification" #~ msgstr "공진 주파수 식별" #~ msgid "Immediately score" #~ msgstr "즉시 점수 매기기" #~ msgid "Please give a score for your favorite Bambu Market model." #~ msgstr "좋아하는 Bambu Market 모델에 점수를 매겨주세요." #~ msgid "Score" #~ msgstr "점수" #~ msgid "Bambu High Temperature Plate" #~ msgstr "뱀부 고온 플레이트" #~ msgid "Can't connect to the printer" #~ msgstr "프린터에 연결할 수 없습니다" #~ msgid "Recommended temperature range" #~ msgstr "권장 온도 범위" #~ msgid "High Temp Plate" #~ msgstr "고온 플레이트" #~ msgid "Bed temperature when high temperature plate is installed. A value of 0 means the filament does not support printing on the High Temp Plate" #~ msgstr "고온 플레이트 설치 시 베드 온도. 값 0은 필라멘트가 고온 플레이트에 출력하는 것을 지원하지 않음을 의미합니다" #~ msgid "Internal bridge support thickness" #~ msgstr "내부 다리 서포트 두께" #~ msgid "If enabled, support loops will be generated under the contours of internal bridges. These support loops could prevent internal bridges from extruding over the air and improve the top surface quality, especially when the sparse infill density is low. This value determines the thickness of the support loops. 0 means disable this feature" #~ msgstr "활성화된 경우 내부 다리의 윤곽선 아래에 서포트 루프를 생성합니다. 이러한 서포트 루프는 내부 다리를 공중에서 압출하는 것을 방지하고, 특히 드문 채우기 밀도가 낮을 때 상단 표면 품질을 향상시킬 수 있습니다. 이 값은 서포트 루프의 두께를 결정하며 0은 이 기능을 사용하지 않음을 의미합니다" #~ msgid "" #~ "Style and shape of the support. For normal support, projecting the supports into a regular grid will create more stable supports (default), while snug support towers will save material and reduce object scarring.\n" #~ "For tree support, slim style will merge branches more aggressively and save a lot of material (default), while hybrid style will create similar structure to normal support under large flat overhangs." #~ msgstr "" #~ "서포트의 모양. 일반 서포트의 경우, 격자는 보다 안정적인 서포트(기본값)가 생성되는 반면 맞춤 서포트는 재료를 절약하고 객체 자국을 줄입니다.\n" #~ "트리 서포트의 경우 얇은 모양은 가지를 더 적극적으로 병합하고 많은 재료를 절약합니다(기본값). 반면 혼합 스타일은 크고 평평한 오버행 아래에 일반 지지대와 유사한 구조를 만듭니다." #~ msgid "Target chamber temperature" #~ msgstr "설정할 챔버 온도" #~ msgid "Bed temperature difference" #~ msgstr "베드 온도차" #~ msgid "Do not recommend bed temperature of other layer to be lower than initial layer for more than this threshold. Too low bed temperature of other layer may cause the model broken free from build plate" #~ msgstr "이 임계값 이상으로 다른 레이어의 베드 온도를 초기 레이어보다 낮추는 것을 권장하지 않습니다. 다른 레이어의 베드 온도가 너무 낮으면 빌드 플레이트에서 모델이 깨질 수 있습니다" #~ msgid "Orient the model" #~ msgstr "모델 방향 설정" #~ msgid "" #~ "Please input valid values:\n" #~ "start > 0 step >= 0\n" #~ "end > start + step" #~ msgstr "" #~ "유효한 값을 입력하십시오:\n" #~ "시작 > 0 단계 >= 0\n" #~ "끝 > 시작 + 단계)" #~ msgid "" #~ "Please input valid values:\n" #~ "start > 10 step >= 0\n" #~ "end > start + step" #~ msgstr "" #~ "유효한 값을 입력하십시오:\n" #~ "시작 > 10 단계 >= 0\n" #~ "끝 > 시작 + 단계)"