{
    "adaptive_bed_mesh_margin": "0",
	"auxiliary_fan": "0",
	"bed_exclude_area": [
		"0x0"
	],
    "bed_mesh_max": "99999,99999",
    "bed_mesh_min": "-99999,-99999",
    "bed_mesh_probe_distance": "50,50",
	"bed_temperature_formula": "by_highest_temp",
    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\nTIMELAPSE_TAKE_FRAME",
    "best_object_pos": "0.5,0.5",
    "change_filament_gcode": "",
    "cooling_tube_length": "0",
    "cooling_tube_retraction": "0",
    "default_bed_type": "Textured PEI Plate",
	"default_filament_profile": [
		"Generic PLA @System"
	],
	"default_print_profile": "0.20mm Standard @OpenEYE Peacock V2",
	"deretraction_speed": [
		"30"
	],
    "disable_m73": "0",
    "emit_machine_limits_to_gcode": "0",
    "enable_filament_ramming": "0",
    "enable_long_retraction_when_cut": "0",
    "extra_loading_move": "0",
    "extruder_clearance_height_to_lid": "34",
    "extruder_clearance_height_to_rod": "34",
    "extruder_clearance_radius": "47",
    "extruder_colour": [
        "#FCE94F"
    ],
    "extruder_offset": [
        "0x0"
    ],
    "fan_kickstart": "0",
    "fan_speedup_overhangs": "1",
    "fan_speedup_time": "0",
	"from": "system",
	"gcode_flavor": "klipper",
    "head_wrap_detect_zone": [],
    "high_current_on_filament_swap": "0",
    "host_type": "octoprint",
	"inherits": "fdm_machine_common",
	"instantiation": "false",
    "layer_change_gcode": "SET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}\n_MMU_UPDATE_HEIGHT",
    "long_retractions_when_cut": [
        "0"
    ],
    "machine_end_gcode": "MMU_END\nEND_PRINT",
    "machine_load_filament_time": "0",
    "machine_max_acceleration_e": [
        "5000",
        "5000"
    ],
    "machine_max_acceleration_extruding": [
        "20000",
        "20000"
    ],
    "machine_max_acceleration_retracting": [
        "5000",
        "5000"
    ],
    "machine_max_acceleration_travel": [
        "9000",
        "9000"
    ],
    "machine_max_acceleration_x": [
        "20000",
        "20000"
    ],
    "machine_max_acceleration_y": [
        "20000",
        "20000"
    ],
    "machine_max_acceleration_z": [
        "500",
        "500"
    ],
    "machine_max_jerk_e": [
        "2.5",
        "2.5"
    ],
    "machine_max_jerk_x": [
        "9",
        "9"
    ],
    "machine_max_jerk_y": [
        "9",
        "9"
    ],
    "machine_max_jerk_z": [
        "3",
        "3"
    ],
    "machine_max_junction_deviation": [
        "0",
        "0"
    ],
    "machine_max_speed_e": [
        "60",
        "60"
    ],
    "machine_max_speed_x": [
        "500",
        "500"
    ],
    "machine_max_speed_y": [
        "500",
        "500"
    ],
    "machine_max_speed_z": [
        "30",
        "30"
    ],
    "machine_min_extruding_rate": [
        "0",
        "0"
    ],
    "machine_min_travel_rate": [
        "0",
        "0"
    ],
	"machine_pause_gcode": "PAUSE",
	"machine_start_gcode": "SET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\nMMU_START_SETUP INITIAL_TOOL={initial_tool} TOTAL_TOOLCHANGES=!total_toolchanges! REFERENCED_TOOLS=!referenced_tools! TOOL_COLORS=!colors! TOOL_TEMPS=!temperatures! TOOL_MATERIALS=!materials! FILAMENT_NAMES=!filament_names! PURGE_VOLUMES=!purge_volumes!\nMMU_START_CHECK\nSTART_PRINT BED_TEMP=[bed_temperature_initial_layer] EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TYPE=\"{curr_bed_type}\"\n; Enter YOUR exist start_print macro call here (minus purging logic because tool may not be loaded yet)\nMMU_START_LOAD_INITIAL_TOOL\n; Optionally add YOUR additional start logic (like purging) here to run just prior to start\nSTART_PRINT_SECONDARY\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} ; For pause at layer functionality and better print stats",
	"machine_tool_change_time": "0",
    "machine_unload_filament_time": "0",
    "manual_filament_change": "0",
	"max_layer_height": [
		"0.28"
	],
    "max_resonance_avoidance_speed": "120",
	"min_layer_height": [
		"0.08"
	],
    "min_resonance_avoidance_speed": "70",
	"name": "fdm_openeye_common",
	"nozzle_diameter": [
		"0.4",
		"0.4"
	],
    "nozzle_height": "2.5",
    "nozzle_hrc": "0",
	"nozzle_type": "brass",
    "nozzle_volume": "0",
    "parking_pos_retraction": "0",
    "pellet_modded_printer": "0",
    "preferred_orientation": "0",
	"print_host": "openeye3dpi.local",
	"printable_height": "250",
	"printer_settings_id": "",
	"printer_technology": "FFF",
	"printer_variant": "0.4",
    "printing_by_object_gcode": "",
	"purge_in_prime_tower": "1",
    "resonance_avoidance": "0",
    "retract_before_wipe": [
        "0%"
    ],
    "retract_length_toolchange": [
        "0"
    ],
    "retract_lift_above": [
        "0"
    ],
    "retract_lift_below": [
        "180",
		"180"
    ],
    "retract_lift_enforce": [
        "All Surfaces"
    ],
    "retract_restart_extra": [
        "0"
    ],
    "retract_restart_extra_toolchange": [
        "0"
    ],
    "retract_when_changing_layer": [
        "1"
    ],
    "retraction_distances_when_cut": [
        "18"
    ],
    "retraction_length": [
        "0.8"
    ],
    "retraction_minimum_travel": [
        "1"
    ],
    "retraction_speed": [
        "30"
    ],
	"scan_first_layer": "0",
	"silent_mode": "0",
	"single_extruder_multi_material": "1",
    "support_air_filtration": "0",
    "support_chamber_temp_control": "0",
	"support_multi_bed_types": "1",
    "template_custom_gcode": "",	
    "thumbnails": "48x48/PNG, 300x300/PNG",	
    "thumbnails_format": "PNG",
    "time_cost": "0",
    "time_lapse_gcode": "",
    "travel_slope": [
        "3"
    ],
	"type": "machine",
    "use_firmware_retraction": "0",
	"use_relative_e_distances": "1",
	"wipe": [
		"1"
	],
    "wipe_distance": [
        "1"
    ],
	"z_hop": [
		"0.4"
	],
    "z_hop_types": [
        "Auto Lift"
    ],
    "z_offset": "0"
}