{
	"type": "process",
	"name": "0.25mm Vase Mode @LH Stinger",
	"inherits": "fdm_process_lh_common",
	"from": "system",
	"setting_id": "LHS_P_vase_mode",
	"instantiation": "true",
	"compatible_printers": [
		"LH Stinger 0.4 nozzle",
		"LH Stinger MMU 0.4 nozzle"
	],
	"accel_to_decel_factor": "90%",
	"bottom_shell_layers": "5",
	"bridge_acceleration": "5000",
	"bridge_flow": "1.4",
	"brim_object_gap": "0.04",
	"default_acceleration": "15000",
	"default_jerk": "10",
	"filter_out_gap_fill": "1",
	"gap_infill_speed": "200",
	"infill_jerk": "10",
	"infill_wall_overlap": "10%",
	"initial_layer_jerk": "10",
	"initial_layer_line_width": "0.65",
	"initial_layer_print_height": "0.25",
	"initial_layer_speed": "80",
	"initial_layer_travel_speed": "250",
	"inner_wall_acceleration": "15000",
	"inner_wall_jerk": "10",
	"inner_wall_line_width": "0.46",
	"internal_solid_infill_acceleration": "15000",
	"internal_solid_infill_line_width": "0.46",
	"layer_height": "0.25",
	"line_width": "0.46",
	"notes": "Decrease your Filament - Minimum layer time to ~2 seconds and set your fan speeds to be constant",
	"outer_wall_jerk": "10",
	"outer_wall_line_width": "0.65",
	"outer_wall_speed": "200",
	"overhang_1_4_speed": "60%",
	"overhang_2_4_speed": "40",
	"overhang_3_4_speed": "20",
	"print_extruder_id": [
		"1"
	],
	"print_extruder_variant": [
		"Direct Drive Standard"
	],
	"sparse_infill_acceleration": "15000",
	"sparse_infill_density": "0%",
	"sparse_infill_line_width": "0.46",
	"sparse_infill_pattern": "3dhoneycomb",
	"spiral_mode": "1",
	"spiral_mode_smooth": "1",
	"support_interface_speed": "200",
	"support_line_width": "0.42",
	"support_speed": "200",
	"top_bottom_infill_wall_overlap": "10%",
	"top_shell_layers": "0",
	"top_shell_thickness": "1",
	"top_surface_acceleration": "5000",
	"top_surface_jerk": "10",
	"top_surface_speed": "200",
	"inner_wall_speed": "200",
	"sparse_infill_speed": "200",
	"internal_solid_infill_speed": "200",
	"wall_sequence": "inner wall/outer wall",
	"travel_jerk": "10",
	"skirt_loops": "1",
	"wall_loops": "1"
}