{
    "type": "filament",
    "name": "eSUN PLA-HS @K2 Plus-all",
    "inherits": "fdm_filament_pla",
    "from": "system",
    "setting_id": "GFSA04",
    "instantiation": "true",
    "additional_cooling_fan_speed": [
        "80"
    ],
    "cool_plate_temp": [
        "50"
    ],
    "cool_plate_temp_initial_layer": [
        "50"
    ],
    "filament_cost": [
        "25"
    ],
    "filament_density": [
        "1.25"
    ],
    "filament_flow_ratio": [
        "0.95"
    ],
    "filament_max_volumetric_speed": [
        "18"
    ],
    "filament_retract_before_wipe": [
        "100"
    ],
    "filament_retraction_length": [
        "1.2"
    ],
    "filament_vendor": [
        "eSUN"
    ],
    "hot_plate_temp": [
        "50"
    ],
    "hot_plate_temp_initial_layer": [
        "50"
    ],
    "slow_down_layer_time": [
        "6"
    ],
    "slow_down_min_speed": [
        "20"
    ],
    "textured_plate_temp": [
        "50"
    ],
    "textured_plate_temp_initial_layer": [
        "50"
    ],
    "filament_start_gcode": [
        ";filament start gcode\n{if !multicolor_method}\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || layer_z > first_layer_height)}\n{if (layer_z +0.4  < printable_height) }\nG2 Z{layer_z  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{layer_z } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
    ],
    "customized_plate_temp": "50",
    "customized_plate_temp_initial_layer": "50",
    "epoxy_resin_plate_temp": "40",
    "epoxy_resin_plate_temp_initial_layer": "40",
    "pressure_advance": "0.04",
    "default_filament_colour": "\"\"",
    "compatible_printers": [
        "Creality K2 Plus 0.4 nozzle"
    ],
    "filament_id": "E1006"
}