{
    "type": "process",
    "name": "0.30 Standard @Snapmaker U1 (0.6 nozzle)",
    "inherits": "fdm_process_U1_0.6_common",
    "from": "system",
    "instantiation": "true",
    "layer_height": "0.3",
    "initial_layer_print_height": "0.3",
    "bridge_flow": "1",
    "initial_layer_speed": "35",
    "initial_layer_infill_speed": "55",
    "sparse_infill_speed": "100",
    "top_surface_speed": "150",
    "bridge_speed": "30",
    "overhang_3_4_speed": "15",
    "setting_id": "TWxp6qgz1DJa8Ngo",
    "description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.",
    "elefant_foot_compensation": "0.15",
    "smooth_coefficient": "150",
    "overhang_totally_speed": "50",
    "compatible_printers": [
        "Snapmaker U1 (0.6 nozzle)"
    ],
    "filter_out_gap_fill": "1",
    "gap_fill_target": "topbottom",
    "internal_bridge_speed": "100%",
    "prime_tower_brim_width": "5",
    "prime_tower_width": "30",
    "prime_volume": "68",
    "seam_gap": "15%",
    "wipe_tower_extra_rib_length": "8",
    "wipe_tower_extra_spacing": "120%",
    "wipe_tower_wall_type": "rib",
    "ooze_prevention": "1",
    "precise_outer_wall": "0",
    "slowdown_for_curled_perimeters": "0",
    "standby_temperature_delta": "-150",
    "support_threshold_angle": "35",
    "support_type": "tree(auto)"
}