# msgid "" msgstr "" "Project-Id-Version: orcaslicerua\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2026-09-03 10:27+0800\n" "PO-Revision-Date: 2026-07-17 16:25+0300\n" "Last-Translator: Andrij Mizyk \n" "Language-Team: Ukrainian\n" "Language: uk_UA\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=4; plural=((n%10==1 && n%100!=11) ? 0 : ((n%10 >= 2 && n%10 <=4 && (n%100 < 12 || n%100 > 14)) ? 1 : ((n%10 == 0 || (n%10 >= 5 && n%10 <=9)) || (n%100 >= 11 && n%100 <= 14)) ? 2 : 3));\n" "X-Crowdin-File: OrcaSlicer.pot\n" "X-Crowdin-File-ID: 13\n" "X-Crowdin-Language: uk\n" "X-Crowdin-Project: orcaslicerua\n" "X-Crowdin-Project-ID: 748805\n" "X-Generator: Poedit 3.5\n" # AI Translated msgid "Main Extruder" msgstr "Основний екструдер" # AI Translated msgid "Main extruder" msgstr "Основний екструдер" # AI Translated msgid "main extruder" msgstr "основний екструдер" # AI Translated msgid "Auxiliary Extruder" msgstr "Допоміжний екструдер" # AI Translated msgid "Auxiliary extruder" msgstr "Допоміжний екструдер" # AI Translated msgid "auxiliary extruder" msgstr "допоміжний екструдер" msgid "Left Extruder" msgstr "Лівий екструдер" msgid "Left extruder" msgstr "Лівий екструдер" msgid "left extruder" msgstr "лівий екструдер" msgid "Right Extruder" msgstr "Правий екструдер" msgid "Right extruder" msgstr "Правий екструдер" msgid "right extruder" msgstr "правий екструдер" # AI Translated msgid "Main Nozzle" msgstr "Основне сопло" # AI Translated msgid "Main nozzle" msgstr "Основне сопло" # AI Translated msgid "main nozzle" msgstr "основне сопло" # AI Translated msgid "Auxiliary Nozzle" msgstr "Допоміжне сопло" # AI Translated msgid "Auxiliary nozzle" msgstr "Допоміжне сопло" # AI Translated msgid "auxiliary nozzle" msgstr "допоміжне сопло" msgid "Left Nozzle" msgstr "Ліве сопло" msgid "Left nozzle" msgstr "Ліве сопло" msgid "left nozzle" msgstr "ліве сопло" msgid "Right Nozzle" msgstr "Праве сопло" msgid "Right nozzle" msgstr "Праве сопло" msgid "right nozzle" msgstr "праве сопло" # AI Translated msgid "Main Hotend" msgstr "Основний хотенд" # AI Translated msgid "Main hotend" msgstr "Основний хотенд" # AI Translated msgid "main hotend" msgstr "основний хотенд" # AI Translated msgid "Auxiliary Hotend" msgstr "Допоміжний хотенд" # AI Translated msgid "Auxiliary hotend" msgstr "Допоміжний хотенд" # AI Translated msgid "auxiliary hotend" msgstr "допоміжний хотенд" # AI Translated msgid "Left Hotend" msgstr "Лівий хотенд" # AI Translated msgid "Left hotend" msgstr "Лівий хотенд" # AI Translated msgid "left hotend" msgstr "лівий хотенд" # AI Translated msgid "Right Hotend" msgstr "Правий хотенд" # AI Translated msgid "Right hotend" msgstr "Правий хотенд" # AI Translated msgid "right hotend" msgstr "правий хотенд" # AI Translated msgid "main" msgstr "основний" # AI Translated msgid "auxiliary" msgstr "допоміжний" # AI Translated msgid "Main" msgstr "Основний" # AI Translated msgid "Auxiliary" msgstr "Допоміжний" msgid "left" msgstr "лівий" msgid "right" msgstr "правий" msgid "Left" msgstr "Ліво" msgid "Right" msgstr "Право" msgid "extruder" msgstr "екструдер" msgid "TPU is not supported by AMS." msgstr "TPU не підтримується AMS." msgid "AMS does not support 'Bambu Lab PET-CF'." msgstr "AMS не підтримує 'Bambu Lab PET-CF'." msgid "The current filament doesn't support the E3D high-flow nozzle and can't be used." msgstr "Поточний філамент не підтримує сопла з високим потоком E3D і не можуть використовуватися." msgid "The current filament doesn't support the TPU high-flow nozzle and can't be used." msgstr "Поточний філамент не підтримує сопла з високим потоком TPU і не можуть використовуватися." msgid "Auto dynamic flow calibration is not supported for TPU filament." msgstr "Авто-динамічне калібрування потоку не підтримує філамент TPU." msgid "Bambu TPU 85A is not supported for printing with 0.4 mm Standard or High Flow nozzles." msgstr "Bambu TPU 85A не підтримує друк 0.4 мм Стандарт або сопла з високим потоком." msgid "How to feed TPU filament." msgstr "Як подати філамент TPU." msgid "How to feed TPU filament on X2D." msgstr "Як подати філамент TPU на X2D." msgid "Please cold pull before printing TPU to avoid clogging. You may use cold pull maintenance on the printer." msgstr "Будь ласка, зробіть холодне протягування перед друком TPU, щоб уникнути налипання. Ви можете використовувати функцію холодного протягування на принтері." msgid "Damp PVA will become flexible and get stuck inside AMS, please take care to dry it before use." msgstr "Вологий PVA стає гнучким і може застрягти всередині AMS, будь ласка, обережно висушіть його перед використанням." msgid "Damp PVA is flexible and may get stuck in extruder. Dry it before use." msgstr "Мокрий PVA гнучкий і може застрягнути в екструдері. Висушіть його перед використанням." # AI Translated msgid "The rough surface of PLA Glow can accelerate wear on the AMS system, particularly on the internal components of the AMS Lite." msgstr "Шорстка поверхня PLA Glow може прискорити знос системи AMS, особливо внутрішніх компонентів AMS Lite." # AI Translated msgid "PLA Glow may wear the AMS first stage feeder. Use an external spool instead." msgstr "PLA Glow може зношувати подавач першого ступеня AMS. Використовуйте натомість зовнішню котушку." msgid "CF/GF filaments are hard and brittle, it's easy to break or get stuck in AMS, please use with caution." msgstr "Філаменти CF/GF є жорсткими і крихкими, їх легко можна зламати або вони можуть застряти в AMS, будьте обережні під час використання." msgid "PPS-CF is brittle and could break in bended PTFE tube above Toolhead." msgstr "PPS-CF крихкий і може зламатися в зігнутій PTFE-трубці над головкою." msgid "PPA-CF is brittle and could break in bended PTFE tube above Toolhead." msgstr "PPA-CF крихкий і може зламатися в зігнутій PTFE-трубці над головкою." msgid "Default settings may affect print quality. Adjust as needed for best results." msgstr "Типові налаштування можуть впливати на якість друку. Відредагуйте за потреби для досягнення кращого результату." #, c-format, boost-format msgid "%s has a risk of nozzle clogging when using 0.4mm high-flow nozzles. Use with caution." msgstr "%s має ризик налипання на сопло під час використання сопел з високим потоком 0.4мм. Використовуйте з обережністю." # AI Translated #, c-format, boost-format msgid "%s filaments are hard and brittle and could break in AMS, and there is also a risk of nozzle clogging when using 0.4mm high-flow nozzles. Use with caution." msgstr "Філаменти %s тверді та крихкі й можуть зламатися в AMS; також існує ризик засмічення сопла під час використання високопотокових сопел 0.4 мм. Використовуйте з обережністю." # AI Translated #, c-format, boost-format msgid "%s has a risk of nozzle clogging when using 0.4, 0.6, 0.8mm high-flow nozzles. Use with caution." msgstr "%s має ризик засмічення сопла під час використання високопотокових сопел 0.4, 0.6, 0.8 мм. Використовуйте з обережністю." # AI Translated #, c-format, boost-format msgid "%s may fail to load or unload due to the Filament Track Switch. If you wish to continue." msgstr "%s може не завантажитися або не вивантажитися через Filament Track Switch. Якщо ви бажаєте продовжити." #, c-format, boost-format msgid "%s is not supported by %s extruder." msgstr "%s не підтримується екструдером %s." # AI Translated #, c-format, boost-format msgid "There may be critical print quality issues when printing '%s' with %s Bowden extruder. Use with caution!" msgstr "Можливі критичні проблеми з якістю друку під час друку '%s' Боуден-екструдером %s. Використовуйте з обережністю!" # AI Translated #, c-format, boost-format msgid "There may be critical print quality issues when printing '%s' with %s extruder. Use with caution!" msgstr "Можливі критичні проблеми з якістю друку під час друку '%s' екструдером %s. Використовуйте з обережністю!" # AI Translated #, c-format, boost-format msgid "There may be print quality issues when printing '%s' with %s Bowden extruder. Use with caution." msgstr "Можливі проблеми з якістю друку під час друку '%s' Боуден-екструдером %s. Використовуйте з обережністю." # AI Translated #, c-format, boost-format msgid "There may be print quality issues when printing '%s' with %s extruder. Use with caution." msgstr "Можливі проблеми з якістю друку під час друку '%s' екструдером %s. Використовуйте з обережністю." msgid "High Flow" msgstr "Високий потік" msgid "Standard" msgstr "Стандартний" msgid "TPU High Flow" msgstr "Високий потік TPU" msgid "Unknown" msgstr "Невідомий" msgid "Hardened Steel" msgstr "Загартована сталь" msgid "Stainless Steel" msgstr "Нержавіюча сталь" msgid "Tungsten Carbide" msgstr "Карбід вольфраму" # AI Translated msgid "The toolhead and hotend rack may move. Please keep your hands away from the chamber." msgstr "Головка та стійка хотендів можуть рухатися. Тримайте руки подалі від камери." msgid "Warning" msgstr "Попередження" # AI Translated msgid "Hotend information may be inaccurate. Would you like to re-read the hotend? (Hotend information may change during power-off)." msgstr "Інформація про хотенд може бути неточною. Бажаєте повторно зчитати хотенд? (Інформація про хотенд може змінитися під час вимкнення живлення)." msgid "I confirm all" msgstr "Я підтверджую все" msgid "Re-read all" msgstr "Перечитати все" msgid "Reading the hotends, please wait." msgstr "Читання хотендів, будь ласка, зачекайте." msgid "During the hotend upgrade, the toolhead will move. Don't reach into the chamber." msgstr "Під час оновлення хотенду, головка може рухатися. Не лізьте в камеру." msgid "Update" msgstr "Оновлення" msgid "Current AMS humidity" msgstr "Поточна вологість AMS" msgid "Humidity" msgstr "Вологість" msgid "Temperature" msgstr "Температура" msgid "Left Time" msgstr "Часу залишилося" msgid "Drying" msgstr "Сушка" msgid "Idle" msgstr "Холостий хід" msgid "Model:" msgstr "Модель:" msgid "Serial:" msgstr "Серійний номер:" msgid "Version:" msgstr "Версія:" msgid "Latest version" msgstr "Остання версія" msgid "Row A" msgstr "Рядок A" msgid "Row B" msgstr "Рядок B" msgid "Toolhead" msgstr "Головка" msgid "Empty" msgstr "Порожній" msgid "Error" msgstr "Помилка" msgid "Induction Hotend Rack" msgstr "Індукційна стійка хотенду" msgid "Hotends Info" msgstr "Інформація про хотенд" msgid "Read All" msgstr "Читати все" msgid "Reading " msgstr "Читання " msgid "Please wait" msgstr "Будь ласка, зачекайте" # AI Translated msgid "Reading" msgstr "Зчитування" msgid "Running..." msgstr "Запуск..." msgid "Raised" msgstr "Піднято" msgid "The hotend is in an abnormal state and currently unavailable. Please go to 'Device -> Upgrade' to upgrade firmware." msgstr "Хотенд в незвичному стані і тимчасово недоступний. Будь ласка, перейдіть 'Пристрій -> Оновити', щоб оновити прошивку." msgid "Abnormal Hotend" msgstr "Ненормальний хотенд" msgid "Cancel" msgstr "Скасувати" msgid "Jump to the upgrade page" msgstr "Перейти до сторінки оновлення" msgid "Refresh" msgstr "Оновити" msgid "Refreshing" msgstr "Оновлення" # AI Translated msgid "Hotend status abnormal, unavailable at present. Please upgrade the firmware and try again." msgstr "Стан хотенда нештатний, наразі недоступний. Оновіть прошивку та спробуйте ще раз." msgid "SN" msgstr "СН" msgid "Version" msgstr "Версія" #, c-format, boost-format msgid "Used Time: %s" msgstr "Використаний час: %s" # AI Translated msgid "Dynamic nozzles are allocated on the current plate. Picking hotend is not supported." msgstr "На поточній пластині призначено динамічні сопла. Вибір хотенда не підтримується." msgid "Hotend Rack" msgstr "Стійка хотенду" msgid "ToolHead" msgstr "Головка" msgid "Nozzle information needs to be read" msgstr "Інформація про сопло, яку потрібно прочитати" msgid "Support Painting" msgstr "Малювання підтримок" msgid "Apply" msgstr "Застосувати" msgid "On highlighted overhangs only" msgstr "Тільки на підсвічених нависанняхх" msgid "Erase all" msgstr "Очистити все" msgid "Highlight overhangs" msgstr "Підсвічувати нависання" msgid "Tool type" msgstr "Тип інструменту" msgid "Gap fill" msgstr "Заповнення прогалин" msgid "Reset direction" msgstr "Скинути напрямок" msgid "Section view" msgstr "Вигляд у розрізі" msgid "Brush size" msgstr "Розмір пера" msgid "Smart fill angle" msgstr "Кут розумного заповнення" msgid "Gap area" msgstr "Площа прогалини" msgid "Left mouse button" msgstr "Ліва кнопка миші" msgid "Enforce supports" msgstr "Примусові підтримки" msgid "Right mouse button" msgstr "Права кнопка миші" msgid "Block supports" msgstr "Блокувати підтримки" msgid "Erase" msgstr "Стерти" msgid "Mouse wheel" msgstr "Колісок миші" msgid "Auto support threshold angle: " msgstr "Поріг кута автоматичної підтримки: " msgid "Circle" msgstr "Коло" msgid "Sphere" msgstr "Сфера" msgid "Fill" msgstr "Заповнення" msgid "Gap Fill" msgstr "Заповнення прогалин" msgid "Vertical" msgstr "Вертикальний" msgid "Horizontal" msgstr "Горизонтальний" #, boost-format msgid "Allows painting only on facets selected by: \"%1%\"" msgstr "Малювання лише на вибраних гранях: \"%1%\"" msgid "Highlight faces according to overhang angle." msgstr "Підсвічувати грані відповідно до кута нависання." msgid "No auto support" msgstr "Без автоматичної підтримки" msgid "Done" msgstr "Виконано" msgid "Support generated" msgstr "Підтримки згенеровані" msgid "Entering Paint-on supports" msgstr "Вхід у малювання підтримок" msgid "Leaving Paint-on supports" msgstr "Вихід з малювання підтримок" msgid "Paint-on supports editing" msgstr "Зміна малювання підтримок" msgid "Gizmo-Place on Face" msgstr "Gizmo - Покласти на грань" msgid "Lay on Face" msgstr "Покласти на грань" #, boost-format msgid "Filament count exceeds the maximum number that painting tool supports. Only the first %1% filaments will be available in painting tool." msgstr "Кількість філаменту перевищує максимальну кількість, яку підтримує інструмент малювання. Лише перші %1% філаменту будуть доступні в інструменті малювання." msgid "Color Painting" msgstr "Фарбування" msgid "Brush shape" msgstr "Форма пера" msgid "Paint" msgstr "Малювання" msgid "Choose filament" msgstr "Вибрати філамент" msgid "Edge detection" msgstr "Виявлення границь" msgid "Triangles" msgstr "Трикутники" msgid "Filaments" msgstr "Філаменти" msgid "Brush" msgstr "Пензель" msgid "Smart fill" msgstr "Розумне заповнення" msgid "Bucket fill" msgstr "Заливка" msgid "Height range" msgstr "Діапазон висот" msgid "Toggle Wireframe" msgstr "Перемикання каркасу" msgid "Remap filaments" msgstr "Переорганізувати філаменти" msgid "Remap" msgstr "Переорганізувати" msgid "Reset" msgstr "Скинути" # AI Translated msgctxt "Keyboard Shortcut" msgid "Enter" msgstr "Enter" msgid "Shortcut Key " msgstr "Комбінація клавіш " msgid "Triangle" msgstr "Трикутник" msgid "Height Range" msgstr "Діапазон висот" msgid "Remove painted color" msgstr "Вилучити зафарбований колір" #, boost-format msgid "Painted using: Filament %1%" msgstr "Забарвлений за допомогою: Філамент %1%" msgid "To:" msgstr "До:" msgid "Entering color painting" msgstr "Вхід у фарбування" msgid "Leaving color painting" msgstr "Вихід з фарбування" msgid "Color painting editing" msgstr "Зміна фарбування" msgid "Paint-on fuzzy skin" msgstr "Малювання шорсткої поверхні" msgid "Add fuzzy skin" msgstr "Додати шорстку поверхню" msgid "Remove fuzzy skin" msgstr "Вилучити шорстку поверхню" msgid "Reset selection" msgstr "Скинути вибір" msgid "Warning: Fuzzy skin is disabled, painted fuzzy skin will not take effect!" msgstr "Попередження: Шорстка поверхня вимкнена, намальована шорстка поверхня може не мати ефекту!" msgid "Enable painted fuzzy skin for this object" msgstr "Дозволити намальовану шорстку поверхню для цього обʼєкта" msgid "Entering Paint-on fuzzy skin" msgstr "Вхід у малювання шорсткої поверхні" msgid "Leaving Paint-on fuzzy skin" msgstr "Вихід з малювання шорсткої поверхні" msgid "Paint-on fuzzy skin editing" msgstr "Зміна малювання шорсткої поверхні" msgid "Move" msgstr "Перемістити" msgid "Please select at least one object." msgstr "Будь ласка, виберіть принаймні один об’єкт." msgid "Gizmo-Move" msgstr "Gizmo переміщення" msgid "Rotate" msgstr "Повернути" msgid "Gizmo-Rotate" msgstr "Gizmo обертання" msgid "Optimize orientation" msgstr "Оптимізувати орієнтацію" msgctxt "Verb" msgid "Scale" msgstr "Масштаб" msgid "Gizmo-Scale" msgstr "Gizmo масштабування" msgid "Error: Please close all toolbar menus first" msgstr "Помилка: будь ласка, спочатку закрийте все меню панелі інструментів" msgctxt "inches" msgid "in" msgstr "дюйми" msgid "mm" msgstr "мм" msgid "Part selection" msgstr "Вибір частини" msgid "Fixed step drag" msgstr "Фіксоване перетягування кроками" msgid "Context Menu" msgstr "Контекстне меню" msgid "Toggle Auto-Drop" msgstr "Увімкнути авто-кидання" msgid "Single sided scaling" msgstr "Масштабування в одну сторону" msgid "Position" msgstr "Позиція" msgid "Rotate (relative)" msgstr "Повернути (відносно)" msgid "Scale ratios" msgstr "Коефіцієнти масштабування" msgid "Object operations" msgstr "Операції з обʼєктами" msgid "Scale" msgstr "Масштаб" msgid "Volume operations" msgstr "Операції з об’ємом" msgid "Translate" msgstr "Перемістити" # AI Translated msgid "Group operations" msgstr "Групові операції" msgid "Set orientation" msgstr "Задати орієнтацію" msgid "Set scale" msgstr "Вказати масштаб" msgid "Reset position" msgstr "Скинути позицію" msgid "Reset rotation" msgstr "Скинути обертання" msgid "World" msgstr "Світ" msgid "Object" msgstr "Обʼєкт" msgid "Part" msgstr "Частина" msgid "Relative" msgstr "Відносно" msgid "Coordinate system used for transform actions." msgstr "Система координат для дій перетворення." msgid "Absolute" msgstr "Абсолютно" msgid "Reset current rotation to the value when open the rotation tool." msgstr "Скинути поточне обертання до значення при відкритті інструмента обертання." msgid "Reset current rotation to real zeros." msgstr "Скинути поточне обертання до нульових значень." msgctxt "Noun" msgid "Scale" msgstr "Масштаб" #. TRN - Input label. Be short as possible msgid "Size" msgstr "Розмір" msgid "Uniform scale" msgstr "рівномірне масштабування" msgid "Planar" msgstr "Плоский" msgid "Dovetail" msgstr "Ластівчин хвіст" msgid "Auto" msgstr "Авто" msgid "Manual" msgstr "Вручну" msgid "Plug" msgstr "Підʼєднати" msgid "Dowel" msgstr "Дюбель" msgid "Snap" msgstr "Захоплення" msgid "Prism" msgstr "Призма" msgid "Frustum" msgstr "Усічений" msgid "Square" msgstr "Квадрат" msgid "Hexagon" msgstr "Шестикутник" msgid "Keep orientation" msgstr "Зберегти орієнтацію" msgid "Place on cut" msgstr "Покласти на зріз" msgid "Flip upside down" msgstr "Перевернути догори дном" msgid "Connectors" msgstr "Зʼєднання" msgid "Type" msgstr "Тип" msgid "Style" msgstr "Стиль" msgid "Shape" msgstr "Форма" #. TRN - Input label. Be short as possible #. Size in emboss direction #. TRN - Input label. Be short as possible msgid "Depth" msgstr "Глибина" #. TRN - Input label. Be short as possible #. Angle between Y axis and text line direction. #. TRN - Input label. Be short as possible msgid "Rotation" msgstr "Обертання" msgid "Groove" msgstr "Жолобок" msgid "Width" msgstr "Ширина" msgid "Flap Angle" msgstr "Кут клапана" msgid "Groove Angle" msgstr "Кут жолоба" msgid "Cut position" msgstr "Положення зрізу" msgid "Build Volume" msgstr "Робочий обʼєм" msgid "Multiple" msgstr "Кілька" msgid "Count" msgstr "Кількість" msgid "Gap" msgstr "Проміжок" msgid "Spacing" msgstr "Відстань" msgid "" "Click to flip the cut plane\n" "Drag to move the cut plane" msgstr "" "Клацніть, щоб перевернути площину розрізу\n" "Потягни для переміщення розрізу площини" msgid "" "Click to flip the cut plane\n" "Drag to move the cut plane\n" "Right-click a part to assign it to the other side" msgstr "" "Клацніть, щоб перевернути площину розрізу\n" "Перетягни для переміщення розрізу площини\n" "Клацніть правою кнопкою миші на деталі, щоб призначити її на іншу сторону" msgid "Move cut plane" msgstr "Переміщення розрізу площини" msgid "Mode" msgstr "Режим" msgid "Change cut mode" msgstr "Змінити режим різання" msgid "Tolerance" msgstr "Допуск" msgid "Drag" msgstr "Перетягніть" msgid "Move cut line" msgstr "Перемістити лінію розрізу" msgid "Draw cut line" msgstr "Намалюйте лінію розрізу" msgid "Add connector" msgstr "Додати зʼєднання" msgid "Remove connector" msgstr "Вилучити з’єднання" msgid "Move connector" msgstr "Перемістити зʼєднання" msgid "Add connector to selection" msgstr "Додати зʼєднання до вибраного" msgid "Remove connector from selection" msgstr "Вилучити зʼєднання з вибраного" msgid "Select all connectors" msgstr "Вибрати всі зʼєднання" # AI Translated msgctxt "Cut tool" msgid "Cut" msgstr "Розрізати" msgid "Rotate cut plane" msgstr "Поверніть площину розрізу" msgid "Remove connectors" msgstr "Вилучити з’єднання" msgid "Bulge" msgstr "Виступ" msgid "Bulge proportion related to radius" msgstr "Пропорція випуклості в залежності від радіуса" msgid "Space" msgstr "Пробіл" msgid "Space proportion related to radius" msgstr "Пропорція простору в залежності від радіуса" msgid "Confirm connectors" msgstr "Підтвердити зʼєднання" msgid "Flip cut plane" msgstr "Перевернути площину зрізу" msgid "Groove change" msgstr "Зміна паза" #. TRN: This is an entry in the Undo/Redo stack. The whole line will be 'Edited: (name of whatever was edited)'. msgid "Edited" msgstr "Змінено" msgid "Reset cutting plane" msgstr "Скинути площину різання" msgid "Edit connectors" msgstr "Змінити зʼєднання" msgid "Add connectors" msgstr "Додати зʼєднання" msgid "Upper part" msgstr "Верхня частина" msgid "Lower part" msgstr "Нижня частина" msgid "Keep" msgstr "Залишити" msgid "Flip" msgstr "Перевернути" msgid "After cut" msgstr "Після вирізування" msgid "Cut to parts" msgstr "Розрізати на частини" msgid "Reset cutting plane and remove connectors" msgstr "Скиньте площину різання та зніміть зʼєднання" msgid "Reset Cut" msgstr "Скинути розрізання" msgid "Perform cut" msgstr "Виконати розрізання" msgid "Invalid connectors detected" msgstr "Виявлено неприпустимі зʼєднання" #, c-format, boost-format msgid "%1$d connector is out of cut contour" msgid_plural "%1$d connectors are out of cut contour" msgstr[0] "%1$d зʼєднання виходить за контур розрізання" msgstr[1] "%1$d зʼєднання виходить за контур розрізання" msgstr[2] "%1$d зʼєднань виходить за контур розрізання" msgstr[3] "%1$d зʼєднання виходить за контур розрізання" #, c-format, boost-format msgid "%1$d connector is out of object" msgid_plural "%1$d connectors are out of object" msgstr[0] "%1$d зʼєднання знаходиться за межами обʼєкту" msgstr[1] "%1$d зʼєднання знаходяться за межами обʼєкту" msgstr[2] "%1$d зʼєднань знаходяться за межами обʼєкту" msgstr[3] "%1$d зʼєднаня знаходяться за межами обʼєкту" msgid "Some connectors are overlapped" msgstr "Деякі зʼєднання перекриваються" msgid "Select at least one object to keep after cutting." msgstr "Виберіть хочаб один обʼєкт, який треба зберегти після розрізання." msgid "Cut plane is placed out of object" msgstr "Площина зрізу розміщена поза обʼєктом" msgid "Cut plane with groove is invalid" msgstr "Площина зрізу з пазом невірна" msgid "Connector" msgstr "Зʼєднання" #, boost-format msgid "" "Objects(%1%) have duplicated connectors. Some connectors may be missing in slicing result.\n" "Please report to the OrcaSlicer team in which scenario this issue happened.\n" "Thank you." msgstr "" "Обʼєкти(%1%) мають дубльовані зʼєднання. Деякі зʼєднання можуть бути упущені в результаті нарізання.\n" "Будь ласка, повідомте команду OrcaSlicer за якого сценарію це сталося.\n" "Дякую." msgid "Cut by Plane" msgstr "Вирізати площиною" # AI Translated msgid "Non-manifold edges be caused by cut tool: do you want to fix now?" msgstr "Неманіфолдні краї, спричинені різальним інструментом: хочете виправити зараз?" msgid "Repairing model object" msgstr "Відновлення обʼєкта моделі" msgid "Cut by line" msgstr "Розрізати по лінії" msgid "Delete connector" msgstr "Видалити зʼєднання" msgid "Entering Cut gizmo" msgstr "Вхід у gizmo-вирізання" msgid "Leaving Cut gizmo" msgstr "Вихід з gizmo-вирізання" msgid "Cut gizmo editing" msgstr "Зміна gizmo-вирізання" msgid "Mesh name" msgstr "Назва сітки" msgid "Detail level" msgstr "Рівень деталізації" msgid "Decimate ratio" msgstr "Коефіцієнт зменшення" #, boost-format msgid "Processing model '%1%' with more than 1M triangles could be slow. It is highly recommended to simplify the model." msgstr "Обробка моделі '%1%' з більш ніж 1 млн трикутниками може бути повільною. Настійно рекомендується спростити модель." msgid "Simplify model" msgstr "Спрощена модель" msgid "Simplify" msgstr "Спростити" msgid "Simplification is currently only allowed when a single part is selected" msgstr "Спрощення наразі дозволено лише при виборі окремої деталі" msgid "Extra high" msgstr "Надвисокий" msgid "High" msgstr "Високий" msgid "Medium" msgstr "Середній" msgid "Low" msgstr "Низький" msgid "Extra low" msgstr "Наднизький" #, c-format, boost-format msgid "%d triangles" msgstr "%d трикутники" msgid "Show wireframe" msgstr "Показати каркас" msgid "Unable to apply when processing preview" msgstr "Не можна застосовувати під час попереднього перегляду процесу." msgid "Operation already cancelling. Please wait a few seconds." msgstr "Операція вже скасовується. Зачекайте кілька секунд." msgid "Face recognition" msgstr "Розпізнавання обличчя" msgid "Perform Recognition" msgstr "Виконайте розпізнавання" msgid "Enforce seam" msgstr "Примусовий шов" msgid "Block seam" msgstr "Блокування шва" msgid "Seam painting" msgstr "Малювання шва" msgid "Remove selection" msgstr "Вилучити виділення" msgid "Entering seam painting" msgstr "Вхід у малювання швів" msgid "Leaving Seam painting" msgstr "Вихід з малювання швів" msgid "Paint-on seam editing" msgstr "Зміна малювання швів" #. TRN - Input label. Be short as possible #. Select look of letter shape msgid "Font" msgstr "Шрифт" msgid "Thickness" msgstr "Товщина" msgid "Text Gap" msgstr "Пробіл у тексті" msgid "Angle" msgstr "Кут" msgid "Embedded depth" msgstr "Вбудована глибина" msgid "Input text" msgstr "Введення тексту" msgid "Surface" msgstr "Поверхня" msgid "Horizontal text" msgstr "Горизонтальний текст" msgid "Shift+" msgstr "Shift+" msgid "Mouse move up or down" msgstr "Рух мишею вверх або вниз" msgid "Rotate text" msgstr "Повернути текст" msgid "Text shape" msgstr "Форма тексту" #. TRN - Title in Undo/Redo stack after rotate with text around emboss axe msgid "Text rotate" msgstr "Поворот тексту" #. TRN - Title in Undo/Redo stack after move with text along emboss axe - From surface msgid "Text move" msgstr "Переміщення тексту" msgid "Set Mirror" msgstr "Встановити віддзеркалення" msgid "Embossed text" msgstr "Рельєфний текст" msgid "Enter emboss gizmo" msgstr "Ввести пристрій для тиснення" msgid "Leave emboss gizmo" msgstr "Залиште пристрій для тиснення" msgid "Embossing actions" msgstr "Дії з тисненням" msgid "Position on surface" msgstr "Росташування на поверхні" msgid "Emboss" msgstr "Рельєфне тиснення" msgid "NORMAL" msgstr "ЗВИЧАЙНИЙ" msgid "SMALL" msgstr "МАЛИЙ" msgid "ITALIC" msgstr "КУРСИВ" msgid "SWISS" msgstr "ШВЕЙЦАРСЬКИЙ" msgid "MODERN" msgstr "СУЧАСНИЙ" msgid "First font" msgstr "Перший шрифт" msgid "Default font" msgstr "Типовий шрифт" msgid "Advanced" msgstr "Розширені" msgid "Reset all options except the text and operation" msgstr "Скинути всі параметри окрім тексту і операції" msgid "The text cannot be written using the selected font. Please try choosing a different font." msgstr "Текст не може бути написаний вибраним шрифтом. Спробуйте вибрати інший шрифт." msgid "Embossed text cannot contain only white spaces." msgstr "Рельєфний текст не може містити лише пробіли." msgid "Text contains character glyph (represented by '?') unknown by font." msgstr "Текст містить символ у вигляді гліфа (представлений символом '?'), шрифт якого невідомий." msgid "Text input doesn't show font skew." msgstr "При введенні тексту не спостерігається нахил шрифту." msgid "Text input doesn't show font boldness." msgstr "При введенні тексту не відображається жирність шрифту." msgid "Text input doesn't show gap between lines." msgstr "При введенні тексту не відображаються пропуски між рядками." msgid "Too tall, diminished font height inside text input." msgstr "Занадто високий, зменшіть висота шрифту всередині текстового введення." msgid "Too small, enlarged font height inside text input." msgstr "Занадто малий, збільшіть висоту шрифту в тексті, що вводиться." msgid "Text doesn't show current horizontal alignment." msgstr "Текст не показує поточне вирівнювання по горизонталі." msgid "Revert font changes." msgstr "Скасувати зміну шрифту." #, boost-format msgid "Font \"%1%\" can't be selected." msgstr "Шрифт \"%1%\" не може бути вибраний." msgid "Operation" msgstr "Операція" #. TRN EmbossOperation #. ORCA msgid "Join" msgstr "Обʼєднати" msgid "Click to change text into object part." msgstr "Клацніть, щоб змінити текст на частині обʼєкта." msgid "You can't change a type of the last solid part of the object." msgstr "Ви не можете змінити тип останньої твердої частини об’єкта." msgctxt "EmbossOperation" msgid "Cut" msgstr "Вирізати" msgid "Click to change part type into negative volume." msgstr "Клацніть, щоб змінити тип частини на відʼємний обʼєм." msgid "Modifier" msgstr "Модифікатор" msgid "Click to change part type into modifier." msgstr "Натисніть, щоб змінити тип деталі на модифікаторі." msgid "Change Text Type" msgstr "Змінити тип тексту" #, boost-format msgid "Rename style (%1%) for embossing text" msgstr "Перейменувати стиль (%1%) для рельєфного тексту" msgid "Name can't be empty." msgstr "Назва не може бути порожньою." msgid "Name has to be unique." msgstr "Назва повинна бути унікальною." msgid "OK" msgstr "ОК" msgid "Rename style" msgstr "Перейменувати стиль" msgid "Rename current style." msgstr "Перейменувати поточний стиль." msgid "Can't rename temporary style." msgstr "Неможливо перейменувати тимчасовий стиль." msgid "First Add style to list." msgstr "Спочатку додайте стиль до списку." #, boost-format msgid "Save %1% style" msgstr "Зберегти стиль %1%" msgid "No changes to save." msgstr "Ніяких змін не зберігати." msgid "New name of style" msgstr "Нова назва стилю" msgid "Save as new style" msgstr "Зберегти як новий стиль" msgid "Only valid font can be added to style." msgstr "До стилю можна додати лише допустимий шрифт." msgid "Add style to my list." msgstr "Додати стиль до мого списку." msgid "Save as new style." msgstr "Зберегти як новий стиль." msgid "Remove style" msgstr "Вилучити стиль" msgid "Can't remove the last existing style." msgstr "Неможливо видалити останній існуючий стиль." #, boost-format msgid "Are you sure you want to permanently remove the \"%1%\" style?" msgstr "Ви впевнені, що хочете назавжди видалити стиль \"%1%\"?" #, boost-format msgid "Delete \"%1%\" style." msgstr "Видалити стиль \"%1%\"." #, boost-format msgid "Can't delete \"%1%\". It is last style." msgstr "Не вдається видалити \"%1%\". Це останній стиль." #, boost-format msgid "Can't delete temporary style \"%1%\"." msgstr "Не вдається видалити тимчасовий стиль \"%1%\"." #, boost-format msgid "Modified style \"%1%\"" msgstr "Модифікований стиль \"%1%\"" #, boost-format msgid "Current style is \"%1%\"" msgstr "Поточний стиль \"%1%\"" #, boost-format msgid "" "Changing style to \"%1%\" will discard current style modification.\n" "\n" "Would you like to continue anyway?" msgstr "" "Зміна стилю на \"%1%\" відкине поточну модифікацію стилю.\n" "\n" "Ви все одно хочете продовжити?" msgid "Not valid style." msgstr "Невірний стиль." #, boost-format msgid "Style \"%1%\" can't be used and will be removed from a list." msgstr "Стиль \"%1%\" не може бути використаний і буде вилучений зі списку." msgid "Unset italic" msgstr "Невстановлений курсив" msgid "Set italic" msgstr "Виділено курсивом" msgid "Unset bold" msgstr "Не встановлений жирний шрифт" msgid "Set bold" msgstr "Виділено жирним шрифтом" msgid "Revert text size." msgstr "Зміна розміру тексту." msgid "Revert embossed depth." msgstr "Змінити глибину тиснення." msgid "" "Advanced options cannot be changed for the selected font.\n" "Select another font." msgstr "" "Для вибраного шрифту не можна змінити додаткові параметри.\n" "Виберіть інший шрифт." msgid "Revert using of model surface." msgstr "Скидання розташування." msgid "Revert Transformation per glyph." msgstr "Скидання перетворення." msgid "Set global orientation for whole text." msgstr "Встановити глобальну орієнтацію для всього тексту." msgid "Set position and orientation per glyph." msgstr "Встановіть положення та орієнтацію для кожного гліфа." msgctxt "Alignment" msgid "Left" msgstr "Ліво" msgctxt "Alignment" msgid "Center" msgstr "Центр" msgctxt "Alignment" msgid "Right" msgstr "Право" msgctxt "Alignment" msgid "Top" msgstr "Верх" msgctxt "Alignment" msgid "Middle" msgstr "Середина" msgctxt "Alignment" msgid "Bottom" msgstr "Низ" msgid "Revert alignment." msgstr "Повернути вирівнювання." #. TRN EmbossGizmo: font units msgid "points" msgstr "точки" msgid "Revert gap between characters" msgstr "Скидання відстані між літерами" msgid "Distance between characters" msgstr "Відстань між символами" msgid "Revert gap between lines" msgstr "Змінити проміжок між рядками" msgid "Distance between lines" msgstr "Відстань між рядками" msgid "Undo boldness" msgstr "Скасувати дію" msgid "Tiny / Wide glyphs" msgstr "Тонкі/Tовсті символи" msgid "Undo letter's skew" msgstr "Виправити нахил літер" msgid "Italic strength ratio" msgstr "Коефіцієнт нахилу символів" msgid "Undo translation" msgstr "Скасування перекладу" msgid "Distance of the center of the text to the model surface." msgstr "Відстань від центру тексту до поверхні моделі." msgid "Undo rotation" msgstr "Скасувати обертання" msgid "Rotate text Clockwise." msgstr "Обертати текст за годинниковою стрілкою." msgid "Unlock the text's rotation when moving text along the object's surface." msgstr "Розблокувати обертання тексту при переміщенні тексту вздовж поверхні обʼєкта." msgid "Lock the text's rotation when moving text along the object's surface." msgstr "Блокування обертання тексту під час переміщення тексту вздовж поверхні обʼєкта." msgid "Select from True Type Collection." msgstr "Виберіть із колекції True Type." msgid "Set text to face camera" msgstr "Текст лицьовою стороною до камери" msgid "Orient the text towards the camera." msgstr "Зорієнтувати текст у напрямку камери." #, boost-format msgid "Font \"%1%\" can't be used. Please select another." msgstr "Шрифт \"%1%\" не можливо використати. Виберіть інший." #, boost-format msgid "Can't load exactly same font (\"%1%\"). Application selected a similar one (\"%2%\"). You have to specify font for enable edit text." msgstr "Не вдається завантажити точно такий самий шрифт(\"%1%\"). Програма вибрала схожий шрифт(\"%2%\"). Ви повинні встановити шрифт, щоб дозволити редагування тексту." msgid "No symbol" msgstr "Немає символів" msgid "Loading" msgstr "Завантаження" msgid "In queue" msgstr "У черзі" #. TRN - Input label. Be short as possible #. Height of one text line - Font Ascent msgid "Height" msgstr "Висота" #. TRN - Input label. Be short as possible #. Copy surface of model on surface of the embossed text #. TRN - Input label. Be short as possible msgid "Use surface" msgstr "Викор. поверхню" #. TRN - Input label. Be short as possible #. Option to change projection on curved surface #. for each character(glyph) in text separately msgid "Per glyph" msgstr "За глифом" #. TRN - Input label. Be short as possible #. Align Top|Middle|Bottom and Left|Center|Right msgid "Alignment" msgstr "Вирівнювання" #. TRN - Input label. Be short as possible msgid "Char gap" msgstr "Міжлітерний інтервал" #. TRN - Input label. Be short as possible msgid "Line gap" msgstr "Міжрядковий інтервал" #. TRN - Input label. Be short as possible msgid "Boldness" msgstr "Товщина шрифту" #. TRN - Input label. Be short as possible #. Like Font italic msgid "Skew ratio" msgstr "Коефіцієнт нахилу" #. TRN - Input label. Be short as possible #. Distance from model surface to be able #. move text as part fully into not flat surface #. move text as modifier fully out of not flat surface #. TRN - Input label. Be short as possible msgid "From surface" msgstr "Зсув від поверхні" #. TRN - Input label. Be short as possible #. Keep vector from bottom to top of text aligned with printer Y axis msgid "Keep up" msgstr "Зберігати верт. орієнтацію" #. TRN - Input label. Be short as possible. #. Some Font file contain multiple fonts inside and #. this is numerical selector of font inside font collections msgid "Collection" msgstr "Колекція" #. TRN - Title in Undo/Redo stack after rotate with SVG around emboss axe msgid "SVG rotate" msgstr "Обертання SVG" #. TRN - Title in Undo/Redo stack after move with SVG along emboss axe - From surface msgid "SVG move" msgstr "ПереміщенняSVG" msgid "Enter SVG gizmo" msgstr "Вхід в гізмо SVG" msgid "Leave SVG gizmo" msgstr "Вихід з гізмо SVG" msgid "SVG actions" msgstr "Дії з SVG" msgid "SVG" msgstr "SVG" #, boost-format msgid "Opacity (%1%)" msgstr "Прозорість (%1%)" #, boost-format msgid "Color gradient (%1%)" msgstr "Градієнт кольору (%1%)" msgid "Undefined fill type" msgstr "Невизначений тип заливки" msgid "Linear gradient" msgstr "Лінійний градієнт" msgid "Radial gradient" msgstr "Радіальний градієнт" msgid "Open filled path" msgstr "Відкритий контур із заливкою" msgid "Undefined stroke type" msgstr "Невизначений тип обведення" msgid "Path can't be healed from self-intersection and multiple points." msgstr "Контур не може бути виправлений від проблеми самоперетину і крапок, що дублюються." msgid "Final shape contains self-intersection or multiple points with same coordinate." msgstr "Фінальна форма містить самоперетин або декілька точок з однаковою координатою." #, boost-format msgid "Shape is marked as invisible (%1%)." msgstr "Фігура позначена як невидима (%1%)." #. TRN: The first placeholder is shape identifier, the second is text describing the problem. #, boost-format msgid "Fill of shape (%1%) contains unsupported: %2%." msgstr "Заливка фігури (%1%) не підтримується: %2%." #, boost-format msgid "Stroke of shape (%1%) is too thin (minimal width is %2% mm)." msgstr "Обведення фігури (%1%) занадто тонке (мінімальна товщина %2% мм)." #, boost-format msgid "Stroke of shape (%1%) contains unsupported: %2%." msgstr "Обведення фігури (%1%) не підтримується: %2%." msgid "Face the camera" msgstr "Лицьовою стороною до камери" #. TRN - Preview of filename after clear local filepath. msgid "Unknown filename" msgstr "Невідома назва файлу" #, boost-format msgid "SVG file path is \"%1%\"" msgstr "Шлях до файлу SVG \"%1%\"" msgid "Reload SVG file from disk." msgstr "Перезавантажте файл SVG з диска." msgid "Change file" msgstr "Змінити файл" msgid "Change to another SVG file." msgstr "Змінити на інший файл .svg" msgid "Forget the file path" msgstr "Забути шлях до файлу" msgid "" "Do NOT save local path to 3MF file.\n" "Also disables 'reload from disk' option." msgstr "" "НЕ зберігати локальний шлях до 3MF-файлу.\n" "Також вимикає опцію \"перезавантажити з диска\"." #. TRN: An menu option to convert the SVG into an unmodifiable model part. msgid "Bake" msgstr "Запікати" #. TRN: Tooltip for the menu item. msgid "Bake into model as uneditable part" msgstr "Запекти в модель як незмінну частину" msgid "Save as" msgstr "Зберегти як" msgid "Save SVG file" msgstr "Зберегти файл SVG" msgid "Save as SVG file." msgstr "Зберегти як файл SVG." msgid "Size in emboss direction." msgstr "Глибина рельєфу." #. TRN: The placeholder contains a number. #, boost-format msgid "Scale also changes amount of curve samples (%1%)" msgstr "Масштаб також змінює кількість вибірок кривої (%1%)" msgid "Width of SVG." msgstr "Ширина SVG." msgid "Height of SVG." msgstr "Висота SVG." msgid "Lock/unlock the aspect ratio of the SVG." msgstr "Блокувати/розблокувати співвідношення сторін SVG." msgid "Reset scale" msgstr "Скинути масштаб" msgid "Distance of the center of the SVG to the model surface." msgstr "Відстань від центру SVG до поверхні моделі." msgid "Reset distance" msgstr "Скинути відстань" msgid "Lock/unlock rotation angle when dragging above the surface." msgstr "Блокування/розблокування кута повороту при перетягуванні над поверхнею." msgid "Mirror vertically" msgstr "Віддзеркалити вертикально" msgid "Mirror horizontally" msgstr "Віддзеркалити горизонтально" #. TRN: This is the name of the action that shows in undo/redo stack (changing part type from SVG to something else). msgid "Change SVG Type" msgstr "Змінити тип SVG-файлу" #. TRN - Input label. Be short as possible msgid "Mirror" msgstr "Дзеркально" msgid "Choose SVG file for emboss:" msgstr "Виберіть SVG файл для рельєфу:" #, boost-format msgid "File does NOT exist (%1%)." msgstr "Файл НЕ існує (%1%)." #, boost-format msgid "Filename has to end with \".svg\" but you selected %1%" msgstr "Назва файлу має закінчуватися на \".svg\", а не на %1%" #, boost-format msgid "Nano SVG parser can't load from file (%1%)." msgstr "Парсер NanoSVG не може прочитати файл (%1%)." #, boost-format msgid "SVG file does NOT contain a single path to be embossed (%1%)." msgstr "Файл SVG не містить жодного шляху для рельєфного тексту (%1%)." msgid "No feature" msgstr "Без можливостей" msgid "Vertex" msgstr "Вершина" msgid "Edge" msgstr "Ребро" msgid "Plane" msgstr "Площина" msgid "Point on edge" msgstr "Точка на ребрі" msgid "Point on circle" msgstr "Точка на колі" msgid "Point on plane" msgstr "Точка на площині" msgid "Center of edge" msgstr "Центр ребра" msgid "Center of circle" msgstr "Центр кола" msgid "Select" msgstr "Вибір" msgid "Select point" msgstr "Виберіть точку" # AI Translated msgctxt "Keyboard Shortcut" msgid "Delete" msgstr "Delete" msgid "Restart selection" msgstr "Вибрати заново" # AI Translated msgctxt "Keyboard Shortcut" msgid "Esc" msgstr "Esc" msgid "Cancel a feature until exit" msgstr "Скасувати функцію до виходу" msgid "Measure" msgstr "Виміряти" msgid "Please confirm explosion ratio = 1, and please select at least one object." msgstr "Підтвердіть коефіцієнт вибуху = 1 і, будь ласка, виберіть принаймні один об’єкт" msgid "Edit to scale" msgstr "Змінити масштаб" msgctxt "Verb" msgid "Scale all" msgstr "Масштабувати все" msgid "None" msgstr "Ні" msgid "Diameter" msgstr "Діаметр" msgid "Length" msgstr "Довжина" msgid "Selection" msgstr "Вибір" msgid " (Moving)" msgstr " (Переміщення)" msgid "" "Select 2 faces on objects and \n" " make objects assemble together." msgstr "" "Виберіть 2 грані на об’єктах і \n" " з’єднайте об’єкти разом." msgid "" "Select 2 points or circles on objects and \n" " specify distance between them." msgstr "" "Виберіть 2 точки або кола на об’єктах та \n" " вкажіть відстань між ними." msgid "Face" msgstr "Грань" msgid " (Fixed)" msgstr " (Фіксований)" msgid "Point" msgstr "Точка" msgid "" "Feature 1 has been reset, \n" "feature 2 has been feature 1" msgstr "" "Особливість 1 скинута, \n" "Особливість 2 тепер особливість 1" msgid "Copy to clipboard" msgstr "Копіювати в буфер обміну" msgid "Perpendicular distance" msgstr "Перпендикулярна відстань" msgid "Distance" msgstr "Відстань" msgid "Direct distance" msgstr "Пряма відстань" msgid "Distance XYZ" msgstr "Відстань XYZ" msgid "Parallel" msgstr "Паралельний" msgid "Center coincidence" msgstr "Співпадіння центрів" msgid "Feature 1" msgstr "Особливість 1" msgid "Reverse rotation" msgstr "Зворотне обертання" msgid "Rotate around center:" msgstr "Обертати навколо центру:" msgid "Parallel distance:" msgstr "Паралельна відстань:" msgid "Flip by Face 2" msgstr "Перевернути за Гранню 2" msgid "Entering Measure gizmo" msgstr "Вхід у gizmo-вимірювання" msgid "Leaving Measure gizmo" msgstr "Вихід з gizmo-вимірювання" # AI Translated msgctxt "Assembly tool" msgid "Assemble" msgstr "Зібрати" msgid "Please confirm explosion ratio = 1 and select at least two volumes." msgstr "Будь ласка, підтвердіть коефіцієнт вибуху = 1 та виберіть принаймні два об’єми." msgid "Please select at least two volumes." msgstr "Будь ласка, виберіть принаймні два об’єми." msgid "(Moving)" msgstr "(Переміщення)" msgid "Point and point assembly" msgstr "Збірка точка до точки" msgid "Warning: please select two different meshes." msgstr "Попередження: будь ласка, виберіть дві різні сітки." msgid "Warning: please select Plane's feature." msgstr "Попередження: будь ласка, виберіть характеристику площини." msgid "Warning: please select Point's or Circle's feature." msgstr "Попередження: будь ласка, виберіть характеристику точки або кола." msgid "" "It is recommended to assemble objects first,\n" "because they are restricted to the bed \n" "and only parts can be lifted." msgstr "" "Рекомендується спочатку зібрати об’єкти,\n" "оскільки об’єкти обмежені платформою,\n" "і тільки частини можуть бути підняті." msgid "Face and face assembly" msgstr "Збірка грань до грані" msgid "Entering Assembly gizmo" msgstr "Вхід у gizmo-збирання" msgid "Leaving Assembly gizmo" msgstr "Вихід з gizmo-збирання" msgid "Ctrl+" msgstr "Ctrl+" msgid "Alt+" msgstr "Alt+" msgid "Notice" msgstr "Повідомлення" msgid "Undefined" msgstr "Не визначено" #, boost-format msgid "%1% was replaced with %2%" msgstr "%1% замінено на %2%" msgid "The configuration may be generated by a newer version of OrcaSlicer." msgstr "Конфігурація може бути створена новішою версією OrcaSlicer." msgid "Some values have been replaced. Please check them:" msgstr "Деякі значення було замінено. Будь ласка, перевірте їх:" msgid "Process" msgstr "Процес" msgid "Filament" msgstr "Філамент" msgid "Machine" msgstr "Машина" msgid "The configuration package was loaded, but some values were not recognized." msgstr "Пакет конфігурації був завантажений, але деякі значення не розпізнано." #, boost-format msgid "The configuration file “%1%” was loaded, but some values were not recognized." msgstr "Файл конфігурації “%1%” був завантажений, але деякі значення не були розпізнані." msgid "Loading configuration" msgstr "Завантаження конфігурації" msgid "STEP files" msgstr "Файли STEP" msgid "STL files" msgstr "Файли STL" msgid "OBJ files" msgstr "Файли OBJ" msgid "AMF files" msgstr "Файли AMF" msgid "3MF files" msgstr "Файли 3MF" msgid "G-code 3MF files" msgstr "Файли G-коду 3MF" msgid "G-code files" msgstr "Файли G-коду" msgid "Supported files" msgstr "Підтримувані файли" msgid "ZIP files" msgstr "Файли ZIP" msgid "Project files" msgstr "Файли проєкту" msgid "Known files" msgstr "Відомі файли" msgid "INI files" msgstr "Файли INI" msgid "SVG files" msgstr "Файли SVG" msgid "Texture" msgstr "Текстура" msgid "Masked SLA files" msgstr "Файли Masked SLA" msgid "Draco files" msgstr "Файли Draco" msgid "OrcaSlicer will terminate because of running out of memory. It may be a bug. It will be appreciated if you report the issue to our team." msgstr "OrcaSlicer завершить роботу через брак памʼяті. Можливо, це помилка. Ми будемо вдячні, якщо ви повідомите про проблему нашій команді." msgid "Fatal error" msgstr "Фатальна помилка" msgid "OrcaSlicer will terminate because of a localization error. It will be appreciated if you report the specific scenario this issue happened." msgstr "Програма OrcaSlicer завершить роботу через помилку локалізації. Буде вдячний, якщо ви повідомите про конкретний сценарій виникнення цієї проблеми." msgid "Critical error" msgstr "Критична помилка" #, boost-format msgid "OrcaSlicer got an unhandled exception: %1%" msgstr "Невідома помилка OrcaSlicer : %1%" msgid "Untitled" msgstr "Без назви" msgid "" "Since version 2.4.0, OrcaSlicer syncs user profiles through Orca Cloud instead of Bambu Cloud.\n" "\n" "To migrate your existing profiles, log in to Orca Cloud and they will be transferred automatically. To learn more about how OrcaSlicer stores and syncs your profiles, or to migrate your presets manually, check out our wiki.\n" "\n" "If you did not use Bambu Cloud to sync profiles, this change does not affect you and you can safely ignore this message." msgstr "" "Починаючи з версії 2.4.0, OrcaSlicer синхронізує профілі користувача через Orca Cloud замість Bambu Cloud.\n" "\n" "Щоб перенести наявні профілі, увійдіть до Orca Cloud, і вони будуть перенесені автоматично. Щоб дізнатися більше про те, як OrcaSlicer зберігає та синхронізує ваші профілі, або щоб перенести свої шаблони вручну, перегляньте нашу вікі.\n" "\n" "Якщо ви не використовували Bambu Cloud для синхронізації профілів, ця зміна вас не стосується, і ви можете сміливо проігнорувати це повідомлення." msgid "Profile syncing change" msgstr "Зміна синхронізації профілю" msgid "Learn more" msgstr "Дізнатися більше" msgid "Reloading network plug-in..." msgstr "Перезавантаження мережевого плагіну..." msgid "Downloading Network Plug-in" msgstr "Завантаження мережевого плагіну" msgid "Downloading Bambu Network Plug-in" msgstr "Завантаження мережевого плагіна для принтерів Bambu" msgid "Login information expired. Please login again." msgstr "Термін дії даних для входу минув. Будь ласка, увійдіть знову." msgid "Incorrect password" msgstr "Невірний пароль" #, c-format, boost-format msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Не вдалося підключити %s! [Серійний номер:%s, код=%s]" msgid "" "Orca Slicer requires the Microsoft WebView2 Runtime to operate certain features.\n" "Click Yes to install it now." msgstr "" "Для роботи деяких функцій Orca Slicer потрібен Microsoft WebView2 Runtime.\n" "Натисніть Так, щоб встановити його зараз." msgid "WebView2 Runtime" msgstr "Виконання WebView2" # AI Translated msgid "" "The Microsoft WebView2 Runtime could not be installed.\n" "Some features, including the setup wizard, may appear blank until it is installed.\n" "Please install it manually from https://developer.microsoft.com/microsoft-edge/webview2/ and restart Orca Slicer." msgstr "" "Не вдалося встановити Microsoft WebView2 Runtime.\n" "Деякі функції, зокрема майстер налаштування, можуть відображатися порожніми, доки його не буде встановлено.\n" "Встановіть його вручну зі сторінки https://developer.microsoft.com/microsoft-edge/webview2/ і перезапустіть Orca Slicer." #, c-format, boost-format msgid "Resources path does not exist or is not a directory: %s" msgstr "Файл ресурсів не існує або це не каталог: %s" #, c-format, boost-format msgid "" "%s\n" "Do you want to continue?" msgstr "%s Хочете продовжити?" msgid "Remember my choice" msgstr "Запамʼятати мій вибір" #, c-format, boost-format msgid "Click to download new version in default browser: %s" msgstr "Клацніть, щоб завантажити нову версію у типовому браузері: %s" msgid "OrcaSlicer needs an update" msgstr "Orca Slicer потребує оновлення" msgid "This is the newest version." msgstr "Це найновіша версія." msgid "Info" msgstr "Інформація" # AI Translated msgid "Loading Plugins" msgstr "Завантаження плагінів" # AI Translated #, c-format, boost-format msgid "Plugin %s is no longer available." msgstr "Плагін %s більше недоступний." # AI Translated #, c-format, boost-format msgid "Plugin %s access is unauthorized." msgstr "Доступ до плагіна %s не авторизовано." msgid "Loading printer & filament profiles" msgstr "Завантаження профілів принтера і філаменту" msgid "Creating main window" msgstr "Створення основного вікна" msgid "Loading current preset" msgstr "Завантаження поточного пресету" msgid "Showing main window" msgstr "Відображення основного вікна" msgid "" "The OrcaSlicer configuration file may be corrupted and cannot be parsed.\n" "OrcaSlicer has attempted to recreate the configuration file.\n" "Please note, application settings will be lost, but printer profiles will not be affected." msgstr "" "Можливо, файл конфігурації OrcaSlicer пошкоджений і не може бути оброблений.\n" "OrcaSlicer спробував відтворити конфігураційний файл.\n" "Зверніть увагу, що налаштування програми будуть втрачені, але профілі принтера не торкнуться." msgid "Rebuild" msgstr "Відновлення" msgid "Loading current presets" msgstr "Завантаження поточних налаштувань" msgid "Loading a mode view" msgstr "Завантаження режиму перегляду" msgid "Choose one file (3MF):" msgstr "Виберіть один файл (3MF):" msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY):" msgstr "Виберіть один або кілька файлів (3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY):" msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF):" msgstr "Виберіть один або кілька файлів (3MF/STEP/STL/SVG/OBJ/AMF):" msgid "Choose ZIP file" msgstr "Виберіть ZIP файл" msgid "Choose one file (GCODE/3MF):" msgstr "Виберіть один файл (GCODE/3MF):" msgid "Ext" msgstr "Екст" msgid "Some presets are modified." msgstr "Деякі пресети змінено." msgid "You can keep the modified presets for the new project, discard, or save changes as new presets." msgstr "Ви можете зберегти модифіковані пресети в новому проекті, відмінити або зберегти зміни як нові пресети." msgid "User logged out" msgstr "Користувач вийшов із системи" msgid "You are currently in Stealth Mode. To log into the Cloud, you need to disable Stealth Mode first." msgstr "Ви зараз у Прихованому режимі. Щоб увійти в хмару, спочатку потрібно вимкнути Прихований режим." msgid "Stealth Mode" msgstr "Прихований режим" msgid "Quit Stealth Mode" msgstr "Вийти з прихованого режиму" msgid "new or open project file is not allowed during the slicing process!" msgstr "новий або відкритий файл проекту не дозволяється в процесі нарізки!" msgid "Open Project" msgstr "Відкрити проєкт" msgid "The version of Orca Slicer is too low and needs to be updated to the latest version before it can be used normally." msgstr "Версія студії Bambu надто низька, її необхідно оновити до останньоїверсії, перш ніж її можна буде використовувати у звичайному режимі" msgid "Cloud sync conflict:" msgstr "Конфлікт синхронізації з хмари:" #, c-format, boost-format msgid "Cloud sync conflict for preset \"%s\":" msgstr "Конфлікт синхронізації з хмари для пресету \"%s\":" # AI Translated msgid "" "This preset has a newer version in OrcaCloud.\n" "Pull downloads the cloud copy. Force push overwrites it with your local preset." msgstr "" "Цей пресет має новішу версію в OrcaCloud.\n" "«Отримати» завантажує хмарну копію. «Примусово надіслати» перезаписує її вашим локальним пресетом." # AI Translated msgid "" "A preset with this name already exists in OrcaCloud.\n" "Pull downloads the cloud copy. Force push overwrites it with your local preset." msgstr "" "Пресет із такою назвою вже існує в OrcaCloud.\n" "«Отримати» завантажує хмарну копію. «Примусово надіслати» перезаписує її вашим локальним пресетом." # AI Translated msgid "" "A preset with the same name was previously deleted from the cloud.\n" "Delete will delete your local preset. Force push overwrites it with your local preset." msgstr "" "Пресет із такою самою назвою раніше було видалено з хмари.\n" "«Видалити» видалить ваш локальний пресет. «Примусово надіслати» перезапише хмарну копію вашим локальним пресетом." # AI Translated msgid "" "There was an unexpected or unidentified preset conflict.\n" "Pull downloads the cloud copy. Force push overwrites it with your local preset." msgstr "" "Стався неочікуваний або невизначений конфлікт пресетів.\n" "«Отримати» завантажує хмарну копію. «Примусово надіслати» перезаписує її вашим локальним пресетом." # AI Translated msgid "" "Force push will overwrite the cloud copy with your local preset changes.\n" "Do you want to continue?" msgstr "" "Примусове надсилання перезапише хмарну копію вашими локальними змінами пресету.\n" "Бажаєте продовжити?" # AI Translated #, c-format, boost-format msgid "" "Force push will overwrite the cloud copy of preset \"%s\" with your local changes.\n" "Do you want to continue?" msgstr "" "Примусове надсилання перезапише хмарну копію пресету \"%s\" вашими локальними змінами.\n" "Бажаєте продовжити?" msgid "Resolve cloud sync conflict" msgstr "Вирішити конфлікт синхронізації з хмари" # AI Translated msgid "Syncing your account…" msgstr "Синхронізація вашого облікового запису…" # AI Translated msgid "Migrating presets…" msgstr "Перенесення пресетів…" # AI Translated msgid "Fetching plugins…" msgstr "Отримання плагінів…" # AI Translated msgid "Loading user presets…" msgstr "Завантаження пресетів користувача…" msgid "Retrieving printer information, please try again later." msgstr "Отримання інформації про принтер, спробуйте ще раз пізніше." msgid "Please try updating OrcaSlicer and then try again." msgstr "Спробуйте оновити OrcaSlicer і потім спробуйте ще раз." msgid "The certificate has expired. Please check the time settings or update OrcaSlicer and try again." msgstr "Сертифікат застарів. Будь ласка, перевірте налаштування часу або оновіть OrcaSlicer і спробуйте ще раз." msgid "The certificate is no longer valid and the printing functions are unavailable." msgstr "Сертифікат вже не дійсний і функції друку недоступні." msgid "Internal error. Please try upgrading the firmware and OrcaSlicer version. If the issue persists, contact support." msgstr "Внутрішня помилка. Будь ласка, спробуйте оновити прошивку і версію OrcaSlicer. Якщо проблема не зникла, звʼяжіться з підтримкою." msgid "" "To use OrcaSlicer with Bambu Lab printers, you need to enable LAN mode and Developer mode on your printer.\n" "\n" "Please go to your printer's settings and:\n" "1. Turn on LAN mode\n" "2. Enable Developer mode\n" "\n" "Developer mode allows the printer to work exclusively through local network access, enabling full functionality with OrcaSlicer." msgstr "" "Щоб використовувати OrcaSlicer з принтерами Bambu Lab, вам потрібно дозволити на принтері режим LAN і режим розробника.\n" "\n" "Будь ласка, зайдіть в налаштування принтера і:\n" "1. Увімкніть режим LAN\n" "2. Дозвольте Режим розробника\n" "\n" "Режим розробника дозволяє принтеру працювати виключно через локальну мережу, дозволяючи всю функціональність OrcaSlicer." msgid "Network Plug-in Restriction" msgstr "Розширення мережевого плагіну" msgid "Privacy Policy Update" msgstr "Оновлення політики конфіденційності" #, c-format, boost-format msgid "your Orca Cloud profile (user ID: \"%s\")" msgstr "ваш профіль Orca Cloud (ІД користувача: \"%s\")" msgid "your default profile" msgstr "ваш типовий профіль" #, c-format, boost-format msgid "a user profile (folder: \"%s\")" msgstr "профіль користувача (тека: \"%s\")" # AI Translated #, c-format, boost-format msgid "" "Existing user presets were found in %s.\n" "Do you want to migrate them to your OrcaCloud profile?\n" "This will copy your presets so they are available under your new account." msgstr "" "У %s знайдено наявні пресети користувача.\n" "Бажаєте перенести їх до вашого профілю OrcaCloud?\n" "Це скопіює ваші пресети, щоб вони були доступні під вашим новим обліковим записом." msgid "Migrate User Presets" msgstr "Переміщення пресетів користувача" #, c-format, boost-format msgid "" "Failed to migrate user presets:\n" "%s" msgstr "" "Не вдалося перемістити пресети користувача:\n" "%s" msgid "The number of user presets cached in the cloud has exceeded the upper limit, newly created user presets can only be used locally." msgstr "Кількість пресетів користувача, збережених у хмарі, перевищила максимально допустиму межу, тому новостворені пресети користувача можна використовувати лише локально." msgid "Sync user presets" msgstr "Синхронізувати пресети користувача" # AI Translated #, c-format, boost-format msgid "The preset \"%s\" is too large to sync to the cloud (exceeds 1MB). Please reduce the preset size by removing custom configurations or use it locally only." msgstr "Пресет \"%s\" завеликий для синхронізації з хмарою (перевищує 1 МБ). Зменште розмір пресету, вилучивши власні конфігурації, або використовуйте його лише локально." #, c-format, boost-format msgid "%s updated from %s to %s" msgstr "%s оновлено з %s до %s" #, c-format, boost-format msgid "%s has been downloaded." msgstr "%s оновлено." #, c-format, boost-format msgid "Bundle %s is no longer available." msgstr "Набір %s більше не доступний." #, c-format, boost-format msgid "Bundle %s access is unauthorized." msgstr "Набір %s має неавторизований доступ." msgid "Loading user preset" msgstr "Завантаження користувацького пресету" msgid "There is an update available. Open the preset bundle dialog to update it." msgstr "Доступне оновлення. Відкрийте вікно набору пресетів, щоб оновити їх." #, c-format, boost-format msgid "%s has been removed." msgstr "%s вилучено." msgid "Select the language" msgstr "Вибрати мову" msgid "Language" msgstr "Мова" #, c-format, boost-format msgid "Switching Orca Slicer to language %s failed." msgstr "Не вдалося перемкнути Orca Slicer на мову %s." msgid "" "\n" "You may need to reconfigure the missing locales, likely by running the \"locale-gen\" and \"dpkg-reconfigure locales\" commands.\n" msgstr "" "\n" "Вам потрібно переконфігурувати пропущені локалі, запустивши команди \"locale-gen\" або \"dpkg-reconfigure locales\".\n" msgid "Orca Slicer - Switching language failed" msgstr "Orca Slicer - Не вдале перемикання мови" msgid "*" msgstr "*" # AI Translated msgid "Plugins" msgstr "Плагіни" # AI Translated #, c-format, boost-format msgid "" "Failed to open the Plugins dialog:\n" "%s" msgstr "" "Не вдалося відкрити діалогове вікно плагінів:\n" "%s" # AI Translated msgid "Failed to open the Plugins dialog (unknown error)." msgstr "Не вдалося відкрити діалогове вікно плагінів (невідома помилка)." # AI Translated msgid "Plugin Terminal" msgstr "Термінал плагіна" msgid "Changing application language" msgstr "Зміна мови програми" msgid "The uploads are still ongoing" msgstr "Завантаження все ще продовжується" msgid "Stop them and continue anyway?" msgstr "Зупинити їх та продовжувати в будь-якому випадку?" msgid "Ongoing uploads" msgstr "Поточні завантаження" msgid "Select a G-code file:" msgstr "Виберіть файл G-коду:" msgid "Could not start URL download. Destination folder is not set. Please choose destination folder in Configuration Wizard." msgstr "Не вдалося розпочати завантаження URL-адреси. Цільова тека не вказана. Будь ласка, оберіть теку призначення в Майстрі конфігурації." msgid "Import File" msgstr "Імпортувати файл" msgid "Delete" msgstr "Видалити" msgid "Choose files" msgstr "Вибрати файли" msgid "New Folder" msgstr "Нова папка" msgid "Open" msgstr "Відкрити" msgid "Rename" msgstr "Перейменувати" msgid "Orca Slicer GUI initialization failed" msgstr "Помилка ініціалізації графічного інтерфейсу Orca Slicer" #, boost-format msgid "Fatal error, exception: %1%" msgstr "Критична помилка, виявлено виняток: %1%" msgid "Quality" msgstr "Якість" msgid "Shell" msgstr "Оболонка" msgid "Infill" msgstr "Заповнення" msgid "Support" msgstr "Підтримки" msgid "Flush options" msgstr "Параметри промивки" msgid "Speed" msgstr "Швидкість" msgid "Strength" msgstr "Міцність" msgid "Top solid layers" msgstr "Верхові суцільні шари" msgid "Top minimum shell thickness" msgstr "Мінімальна товщина верхньої оболонки" msgid "Top Surface Density" msgstr "Щільність верхньої поверхні" msgid "Bottom solid layers" msgstr "Нижніх Суцільних Шарів" msgid "Bottom minimum shell thickness" msgstr "Мінімальна товщина нижньої оболонки" msgid "Bottom Surface Density" msgstr "Щільність нижньої поверхні" msgid "Ironing" msgstr "Розгладжування" msgid "Fuzzy skin" msgstr "Шорстка Поверхня" msgid "Extruders" msgstr "Екструдери" msgid "Extrusion width" msgstr "Ширина екструзії" msgid "Wipe options" msgstr "Параметри протирання" msgid "Bed adhesion" msgstr "Прилипання до столу" msgid "Add Part" msgstr "Додати елемент" msgid "Add Negative Part" msgstr "Додати обʼєм для віднімання" msgid "Add Modifier" msgstr "Додавання модифікатора" msgid "Add Support Blocker" msgstr "Додати блокувальник підтримки" msgid "Add Support Enforcer" msgstr "Додати примусові підтримки" msgid "Add text" msgstr "Додати текст" msgid "Add negative text" msgstr "Додати текст для віднімання" msgid "Add text modifier" msgstr "Додати текстовий модифікатор" msgid "Add SVG part" msgstr "Додати елемент SVG" msgid "Add negative SVG" msgstr "Додати SVG для віднімання" msgid "Add SVG modifier" msgstr "Додати модифікатор SVG" msgid "Select settings" msgstr "Вибрати налаштування" msgid "Hide" msgstr "Приховати" msgid "Show" msgstr "Показати" # AI Translated msgctxt "Keyboard Shortcut" msgid "Del" msgstr "Del" msgid "Delete the selected object" msgstr "Видалення вибраних моделей" # AI Translated msgctxt "Keyboard Shortcut" msgid "Backspace" msgstr "Backspace" msgid "Load..." msgstr "Завантажити..." msgid "Cube" msgstr "Куб" msgid "Cylinder" msgstr "Циліндр" msgid "Cone" msgstr "Конус" msgid "Disc" msgstr "Диск" msgid "Torus" msgstr "Тороїд" msgid "Orca Cube" msgstr "Куб Orca" msgid "OrcaSliced Combo" msgstr "Комбо OrcaSlice" msgid "Orca Badge" msgstr "Міст Orca" msgid "Orca Tolerance Test" msgstr "Тест на допуски Orca" msgid "3DBenchy" msgstr "3DBenchy" msgid "Cali Cat" msgstr "Кіт Cali" msgid "Autodesk FDM Test" msgstr "Тест Autodesk FDM" msgid "Voron Cube" msgstr "Куб Voron" msgid "Stanford Bunny" msgstr "Стенфордський кролик" msgid "Orca String Hell" msgstr "Струнне пекло Orca" msgid "" "This model features text embossment on the top surface. For optimal results, it is advisable to set the 'One Wall Threshold (min_width_top_surface)' to 0 for the 'Only One Wall on Top Surfaces' to work best.\n" "Yes - Change these settings automatically\n" "No - Do not change these settings for me" msgstr "" "Ця модель має тиснення тексту на верхній поверхні. Для отримання оптимальних результатів рекомендується встановити \"Поріг однієї стіни (min_width_top_surface)\" на 0, щоб функція \"Тільки одна стіна на верхній поверхні\" працювала найкраще.\n" "Так - змінювати ці налаштування автоматично\n" "Ні - Не змінювати ці налаштування для мене" msgid "Suggestion" msgstr "Пропозиція" msgid "Text" msgstr "Текст" msgid "Height Range Modifier" msgstr "Модифікатор діапазону висоти шарів" msgid "Add Settings" msgstr "Додати налаштування" msgid "Change Type" msgstr "Змінити тип" msgid "Negative Part" msgstr "Обсяг для віднімання" msgid "Support Blocker" msgstr "Блокувальник підтримки" msgid "Support Enforcer" msgstr "Примусова підтримка" msgid "Change part type" msgstr "Змінити тип частини" msgid "Set as An Individual Object" msgstr "Встановити як окремий обʼєкт" msgid "Set as Individual Objects" msgstr "Встановити як окремі обʼєкти" msgid "Fill bed with copies" msgstr "Заповнити пластину копіями" msgid "Fill the remaining area of bed with copies of the selected object" msgstr "Заповніть решту площу столу копіями вибраного обʼєкта" msgid "Printable" msgstr "Доступно для друку" msgid "Auto Drop" msgstr "Авто-кидання" msgid "Automatically drops the selected object to the build plate." msgstr "Автоматично кидає вибраний обʼєкт на робочу пластину." msgid "Fix Model" msgstr "Виправити модель" msgid "Export as one STL" msgstr "Експортувати як один STL" msgid "Export as STLs" msgstr "Експортувати як декілька STL" msgid "Export as one DRC" msgstr "Експортувати як один DRC" msgid "Export as DRCs" msgstr "Експортувати як декілька DRC" msgid "Reload from disk" msgstr "Перезавантажити з диска" msgid "Reload the selected parts from disk" msgstr "Перезавантажте вибрані частини з диска" msgid "Replace 3D file" msgstr "Замінити 3D-файл" msgid "Replace the selected part with a new 3D file" msgstr "Замінити вибрану частину новими 3D-файлом" msgid "Replace all with 3D files" msgstr "Замінити все 3D-файлами" msgid "Replace all selected parts with 3D files from folder" msgstr "Замінити всі вибрані частини 3D-файлами з теки" msgid "Change filament" msgstr "Зміна філаменту" msgid "Set filament for selected items" msgstr "Встановити філамент для вибраних елементів" msgid "Default" msgstr "Типово" #, c-format, boost-format msgid "Filament %d" msgstr "Філамент %d" msgid "current" msgstr "поточний" msgid "Scale to build volume" msgstr "Масштабування для збільшення обсягу" msgid "Scale an object to fit the build volume" msgstr "Відмасштабувати під область друку" msgid "Flush Options" msgstr "Параметри Промивки" msgid "Flush into objects' infill" msgstr "Промивати у заповнення обʼєкта" msgid "Flush into this object" msgstr "Промивати в обʼєкт" msgid "Flush into objects' support" msgstr "Промивати у підтримки обʼєкта" msgid "Edit in Parameter Table" msgstr "Змінити в таблиці параметрів" msgid "Convert from Inches" msgstr "Конвертувати з дюймів" msgid "Restore to Inch" msgstr "Відновити до дюймів" msgid "Convert from Meters" msgstr "Конвертувати з метричної" msgid "Restore to Meter" msgstr "Відновити в метричну" msgid "Assemble" msgstr "Збирання" msgid "Assemble the selected objects into an object with multiple parts" msgstr "Зібрати вибрані обʼєкти в обʼєкт з кількома частинами" msgid "Assemble the selected objects into an object with single part" msgstr "Зібрати вибрані обʼєкти в обʼєкт в одне ціле" msgid "Mesh boolean" msgstr "Логічна сітка" msgid "Mesh boolean operations including union and subtraction" msgstr "Булеві операції з сіткою, включаючи обʼєднання та віднімання" msgid "Along X Axis" msgstr "Вздовж осі X" msgid "Mirror along the X Axis" msgstr "Відобразити по осі X" msgid "Along Y Axis" msgstr "По осі Y" msgid "Mirror along the Y Axis" msgstr "Відобразити по осі Y" msgid "Along Z Axis" msgstr "По осі Z" msgid "Mirror along the Z Axis" msgstr "Відобразити осі Z" msgid "Mirror object" msgstr "Відобразити модель" msgid "Edit text" msgstr "Змінити текст" msgid "Ability to change text, font, size, ..." msgstr "Можливість змінювати текст, шрифт, розмір, ..." msgid "Edit SVG" msgstr "Змінити SVG" msgid "Change SVG source file, projection, size, ..." msgstr "Змінити вихідний файл SVG, проекцію, розмір, ..." msgid "Invalidate cut info" msgstr "Видалити інформацію про розріз" msgid "Add Primitive" msgstr "Додати примітив" msgid "Add Handy models" msgstr "Додати тестову модель" msgid "Add Models" msgstr "Додати модель" msgid "Show Labels" msgstr "Показати підписи" msgid "To Objects" msgstr "На моделі" msgid "Split the selected object into multiple objects" msgstr "Розділити вибраний обʼєкт на кілька обʼєктів" msgid "To Parts" msgstr "На частини" msgid "Split the selected object into multiple parts" msgstr "Розділити вибрану модель на окремі частини" msgid "Split" msgstr "Розділити" msgid "Split the selected object" msgstr "Розділити вибраний обʼєкт" msgid "Auto orientation" msgstr "Автоматична орієнтація" msgid "Auto orient the object to improve print quality" msgstr "Автоматично орієнтуйте обʼєкт для покращення якості друку." msgid "Edit" msgstr "Змінити" msgid "Merge with" msgstr "Обʼєднати з" # AI Translated msgid "Decompose Color" msgstr "Розкласти колір" msgid "Delete this filament" msgstr "Видалити цей філамент" msgid "Select All" msgstr "Вибрати все" msgid "Select all objects on the current plate" msgstr "Вибрати всі обʼєкти на поточній пластині" msgid "Select All Plates" msgstr "Вибрати всі пластини" msgid "Select all objects on all plates" msgstr "Вибрати всі обʼєкти на всіх пластинах" msgid "Delete All" msgstr "Видалити все" msgid "Delete all objects on the current plate" msgstr "Видалити всі обʼєкти на поточній пластині" msgid "Arrange" msgstr "Впорядкувати" msgid "Arrange current plate" msgstr "Впорядкувати поточну пластину" msgid "Reload All" msgstr "Перезавантажити все" msgid "Reload all from disk" msgstr "Перезавантажити все з диска" msgid "Auto Rotate" msgstr "Авто-поворот" msgid "Auto rotate current plate" msgstr "Автоповорот поточної пластини" msgid "Delete Plate" msgstr "Видалити пластину" msgid "Remove the selected plate" msgstr "Вилучити вибрану пластину" msgid "Add instance" msgstr "Додати екземпляр" msgid "Add one more instance of the selected object" msgstr "Додати ще один екземпляр обраного обʼєкта" msgid "Remove instance" msgstr "Вилучити екземпляр" msgid "Remove one instance of the selected object" msgstr "Вилучити однин екземпляр вибраного обʼєкта" msgid "Set number of instances" msgstr "Вказати кількість екземплярів" msgid "Change the number of instances of the selected object" msgstr "Змінити кількість екземплярів вибраного обʼєкта" msgid "Fill bed with instances" msgstr "Заповнити весь стіл екземплярами" msgid "Fill the remaining area of bed with instances of the selected object" msgstr "Заповнити область столу, що залишилася, екземплярами вибраного обʼєкта" msgid "Clone" msgstr "Клонувати" msgid "Simplify Model" msgstr "Спростити модель" msgid "Subdivision mesh" msgstr "Сітка розділення" msgid "(Lost color)" msgstr "(Втрачений колір)" msgid "Center" msgstr "Центр" msgid "Drop" msgstr "Кинути" msgid "Edit Process Settings" msgstr "Змінити налаштування процесу" msgid "Copy Process Settings" msgstr "Копіювати налаштування процесу" msgid "Paste Process Settings" msgstr "Вставити налаштування процесу" msgid "Edit print parameters for a single object" msgstr "Змінити параметри друку для одного обʼєкта" msgid "Change Filament" msgstr "Змінити філамент" msgid "Set Filament for selected items" msgstr "Встановити філамент для вибраних елементів" msgid "Automatically snaps the selected object to the build plate." msgstr "Автоматично прив’язує вибраний об’єкт до робочої панелі." msgid "Unlock" msgstr "Розблокувати" msgid "Lock" msgstr "Заблокувати" msgid "Edit Plate Name" msgstr "Змінити назву пластини" msgid "Name" msgstr "Назва" msgid "Fila." msgstr "Філам." #, c-format, boost-format msgid "%1$d error repaired" msgid_plural "%1$d errors repaired" msgstr[0] "%1$d помилка виправлена" msgstr[1] "%1$d помилки виправлені" msgstr[2] "%1$d помилок виправлено" msgstr[3] "%1$d помилки виправлено" # AI Translated #, c-format, boost-format msgid "Error: %1$d non-manifold edge." msgid_plural "Error: %1$d non-manifold edges." msgstr[0] "Помилка: %1$d відкрите ребро." msgstr[1] "Помилка: %1$d відкритих ребра." msgstr[2] "Помилка: %1$d відкритих ребер." msgstr[3] "Помилка: %1$d відкритого ребра." msgid "Remaining errors" msgstr "Залишилось помилок" # AI Translated #, c-format, boost-format msgid "%1$d non-manifold edge" msgid_plural "%1$d non-manifold edges" msgstr[0] "%1$d відкрите ребро" msgstr[1] "%1$d відкритих ребра" msgstr[2] "%1$d відкритих ребер" msgstr[3] "%1$d відкритого ребра" msgid "Click the icon to repair model object" msgstr "Клацніть на значок, щоб виправити модель обʼєкта" # AI Translated msgid "Right click the icon to drop the object settings" msgstr "Натисніть правою кнопкою миші на значок, щоб скинути налаштування моделі" msgid "Click the icon to reset all settings of the object" msgstr "Натисніть значок, щоб скинути всі налаштування моделі" msgid "Right click the icon to drop the object printable property" msgstr "Натисніть правою кнопкою миші на значок, щоб дозволити/заборонити друк моделі" # AI Translated msgid "Click the icon to toggle printable properties of the object" msgstr "Натисніть на значок, щоб перемкнути можливість друку моделі" msgid "Click the icon to edit support painting of the object" msgstr "Натисніть значок, щоб відредагувати малюнок підтримки цієї моделі" msgid "Click the icon to edit color painting for the object" msgstr "Клацніть на значок, щоб змінити фарбування обʼєкту" msgid "Click the icon to shift this object to the bed" msgstr "Натисніть значок, щоб перемістити цю модель на стіл" msgid "Rename Object" msgstr "Перейменувати обʼєкт" msgid "Rename Part" msgstr "Перейменувати частину" msgid "Paste settings" msgstr "Вставити налаштування" msgid "Shift objects to bed" msgstr "Зісунути обʼєкти на стіл" msgid "Object order changed" msgstr "Змінено порядок обʼєктів" msgid "Layer setting added" msgstr "Додано налаштування шару" msgid "Part setting added" msgstr "Додано налаштування частини" msgid "Object setting added" msgstr "Додано налаштування обʼєкта" msgid "Height range settings added" msgstr "Додано налаштування діапазону висоти" msgid "Part settings added" msgstr "Додано налаштування частини" msgid "Object settings added" msgstr "Додано налаштування обʼєкта" msgid "Load Part" msgstr "Завантажити частину" msgid "Load Modifier" msgstr "Завантажити модифікатор" msgid "Loading file" msgstr "Завантаження файлу" msgid "Error!" msgstr "Помилка!" msgid "Failed to get the model data in the current file." msgstr "Не вдалося отримати дані моделі в поточному файлі." msgid "Add primitive" msgstr "Додати примітив" msgid "Generic" msgstr "Базовий примітив" msgid "Switch to per-object setting mode to edit modifier settings." msgstr "Переключення режиму роботи з моделями для редагування параметрів модифікатора." msgid "Switch to per-object setting mode to edit process settings of selected objects." msgstr "Переключення в режим роботи з моделями для редагування налаштувань друку вибраних моделей." msgid "Remove paint-on fuzzy skin" msgstr "Вилучити намальовану текстурну оболонку" msgid "Delete Settings" msgstr "Видалити налаштування" msgid "Remove height range" msgstr "Видалення діапазону висот шарів" msgid "Delete connector from object which is a part of cut" msgstr "Видалити зʼєднання з обʼєкта, яке є частиною розрізу" msgid "Delete solid part from object which is a part of cut" msgstr "Видалити твердотільну частину обʼєкта, який є частиною вирізу" msgid "Delete negative volume from object which is a part of cut" msgstr "Видалення обʼєму для віднімання з моделі, яка є частиною розрізу" msgid "To save cut correspondence you can delete all connectors from all related objects." msgstr "Щоб зберегти інформацію про розріз, можна видалити всі зʼєднання з усіх повʼязаних обʼєктів." msgid "" "This action will break a cut correspondence.\n" "After that, model consistency can't be guaranteed.\n" "\n" "To manipulate with solid parts or negative volumes you have to invalidate cut information first." msgstr "" "Ця дія призведе до видалення інформації про розріз.\n" "Після цього узгодженість моделі не може бути гарантована.\n" "\n" "Щоб маніпулювати з твердотілими частинами або обʼємами для віднімання, необхідно спочатку видалити інформацію про зроблений розріз." msgid "Delete all connectors" msgstr "Видалити всі зʼєднання" msgid "Deleting the last solid part is not allowed." msgstr "Видалення останньої твердотільного частини не допускається." msgid "Delete part" msgstr "Видалити частину" msgid "The target object contains only one part and can not be split." msgstr "Цільовий обʼєкт містить лише одну частину і не може бути розділений." msgid "Split to parts" msgstr "Розділити на частини" msgid "Assembly" msgstr "Збірка" msgid "Merge parts to an object" msgstr "Обʼєднати частини в обʼєкт" # AI Translated msgid "Using variable layer height together with mixed color sublayer may result in poor color mixing quality." msgstr "Використання змінної висоти шару разом із підшаром змішаного кольору може погіршити якість змішування кольорів." msgid "Add layers" msgstr "Додати шари" msgid "Cut Connectors information" msgstr "Інформація про вирізані зʼєднання" msgid "Object manipulation" msgstr "Маніпуляції з обʼєктами" msgid "Group manipulation" msgstr "Групові маніпуляції" msgid "Object Settings to Modify" msgstr "Параметри моделі для зміни" msgid "Part Settings to Modify" msgstr "Параметри елемента для редагування" msgid "Layer Range Settings to Modify" msgstr "Зміна параметрів діапазону шарів" msgid "Part manipulation" msgstr "Маніпуляція з частинами" msgid "Instance manipulation" msgstr "Маніпуляція з копіями" msgid "Height ranges" msgstr "Діапазон висот шарів" msgid "Settings for height range" msgstr "Налаштування для діапазону висот шарів" msgid "Delete selected" msgstr "Видалити вибране" msgid "Layer" msgstr "Шар" msgid "Selection conflicts" msgstr "Конфлікти у виборі" msgid "If the first selected item is an object, the second should also be an object." msgstr "Якщо перший вибраний елемент є обʼєктом, другий також має бути обʼєктом." msgid "If the first selected item is a part, the second should be a part in the same object." msgstr "" "Якщо перший обраний елемент є частиною, другий має бути частиноютого ж\n" "обʼєкту." msgid "The type of the last solid object part cannot be changed." msgstr "Тип останньої твердотільної частини обʼєкта не можна змінювати." msgid "Type:" msgstr "Тип:" msgid "Choose part type" msgstr "Виберіть тип деталі" msgid "Instances to Separated Objects" msgstr "Екземпляри в окремі обʼєкти" msgid "Enter new name" msgstr "Введіть нову назву" msgid "Renaming" msgstr "Перейменування" msgid "The following model object has been repaired" msgid_plural "The following model objects have been repaired" msgstr[0] "Наступна модель обʼєкту успішно відремонтована" msgstr[1] "Наступні моделі обʼєкту успішно відремонтовані" msgstr[2] "Наступних моделей обʼєкту успішно відремонтовано" msgstr[3] "Наступні моделі обʼєкту успішно відремонтовані" msgid "Failed to repair the following model object" msgid_plural "Failed to repair the following model objects" msgstr[0] "Не вдалося відремонтувати таку частину моделі" msgstr[1] "Не вдалося відремонтувати такі частини моделі" msgstr[2] "Не вдалося відремонтувати таких частин моделі" msgstr[3] "Не вдалося відремонтувати такі частини моделі" msgid "Repairing was canceled" msgstr "Ремонт було скасовано" # AI Translated #, c-format, boost-format msgid "\"%s\" will exceed 1 million faces after this subdivision, which may increase slicing time. Do you want to continue?" msgstr "\"%s\" перевищить 1 мільйон граней після цього поділу, що може збільшити час нарізки. Бажаєте продовжити?" #, c-format, boost-format msgid "\"%s\" part's mesh contains errors. Please repair it first." msgstr "Сітка деталі \"%s\" містить помилки. Будь ласка, спочатку виправте її." msgid "Change Filaments" msgstr "Змінити філаменти" msgid "Additional process preset" msgstr "Додатковий пресет процесу" msgid "Remove parameter" msgstr "Вилучити параметр" msgid "to" msgstr "в" msgid "Add height range" msgstr "Додавання діапазон висот шарів" msgid "Invalid numeric." msgstr "Неприпустиме числове значення." msgid "One cell can only be copied to one or more cells in the same column." msgstr "одну клітинку можна скопіювати лише в одну або декілька клітинок у тому самому стовпці" msgid "Copying multiple cells is not supported." msgstr "копіювання кількох клітинок не підтримується" msgid "Outside" msgstr "Поза столом" msgid "Layer height" msgstr "Висота шару" msgid "Wall loops" msgstr "Кількість стінок" msgid "Infill density(%)" msgstr "Щільність заповнення (%)" msgid "Auto Brim" msgstr "Автоматична Кайма" msgid "Mouse ear" msgstr "Мишаче вушко" msgid "Painted" msgstr "Мальована" msgid "Outer brim only" msgstr "Тільки зовні" msgid "Inner brim only" msgstr "Тільки всередині" msgid "Outer and inner brim" msgstr "Зовні та всередині" msgid "No-brim" msgstr "Без кайми" msgid "Outer wall speed" msgstr "Швидкість зовнішньої стінки" msgid "Plate" msgstr "Пластина" msgid "Brim" msgstr "Кайма" msgid "Object/Part Settings" msgstr "Налаштування обʼєкта/частини" msgid "Reset parameter" msgstr "Скинути параметр" msgid "Multicolor Print" msgstr "Багатоколірний друк" msgid "Line Type" msgstr "Тип лінії" #, c-format, boost-format msgid "1x1 Grid: %d mm" msgstr "Сітка 1x1: %d мм" msgid "More" msgstr "Більше" msgid "Open Preferences" msgstr "Відкрийте налаштування." msgid "Open next tip" msgstr "Відкрийте наступну пораду." msgid "Open documentation in web browser" msgstr "Відкрийте документацію у веб-браузері." msgid "Color" msgstr "Колір" msgid "Pause" msgstr "Пауза" msgid "Template" msgstr "Шаблон" msgid "Custom" msgstr "Власний" msgid "Pause:" msgstr "Пауза:" msgid "Custom Template:" msgstr "Власний шаблон:" msgid "Custom G-code:" msgstr "Власний G-код:" msgid "Custom G-code" msgstr "Власний G-код" msgid "Enter Custom G-code used on current layer:" msgstr "Введіть власний G-код, що використовується в поточному шарі:" msgid "Jump to layer" msgstr "Перейти до шару" msgid "Please enter the layer number." msgstr "Будь ласка, введіть номер шару" msgid "Add Pause" msgstr "Додати паузу" msgid "Insert a pause command at the beginning of this layer." msgstr "Вставте паузу на початку цього шару." msgid "Add Custom G-code" msgstr "Додати власний G-код" msgid "Insert custom G-code at the beginning of this layer." msgstr "Вставити власний G-код на початку цього шару." msgid "Add Custom Template" msgstr "Додати власний шаблон" msgid "Insert template custom G-code at the beginning of this layer." msgstr "Вставте власний G-код шаблону на початку цього шару." msgid "Filament " msgstr "Філамент " msgid "Change filament at the beginning of this layer." msgstr "Замінити філамент на початку цього шару." msgid "Delete Pause" msgstr "Видалити паузу" msgid "Delete Custom Template" msgstr "Видалити власний шаблон" msgid "Edit Custom G-code" msgstr "Змінити власний G-код" msgid "Delete Custom G-code" msgstr "Видалити власний G-код" msgid "Delete Filament Change" msgstr "Видалити зміну філаменту" msgid "No printer" msgstr "Немає принтера" msgid "..." msgstr "..." msgid "Failed to connect to the server" msgstr "Не вдалося підключитися до сервера" msgid "Check the status of current system services" msgstr "Перевірте стан поточних системних служб" msgid "code" msgstr "код" msgid "Failed to connect to cloud service" msgstr "Не вдалося підключитися до хмарної служби" msgid "Please click on the hyperlink above to view the cloud service status" msgstr "Клацніть гіперпосилання вище, щоб переглянути статус хмарної служби" msgid "Failed to connect to the printer" msgstr "Не вдалося підключитися до принтера" msgid "Connection to printer failed" msgstr "Помилка підключення до принтера" msgid "Please check the network connection of the printer and Orca." msgstr "Перевірте мережеве зʼєднання принтера і Orca." msgid "Connecting..." msgstr "Підключення..." msgid "Auto Refill" msgstr "Автоматична заміна" msgid "Load" msgstr "Завантажити" msgid "Unload" msgstr "Вивантаження" msgid "Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically load or unload filament." msgstr "Виберіть слот AMS, а потім натисніть кнопку “Завантажити” або “Вивантажити”, щоб автоматично завантажити або вивантажити філаменти." # AI Translated msgid "Filament type is unknown which is required to perform this action. Please set target filament's informations." msgstr "Тип філаменту невідомий, а він потрібен для виконання цієї дії. Вкажіть інформацію про цільовий філамент." msgid "AMS has not been initialized. Please initialize it before use." msgstr "AMS не встановлено. Будь ласка, ініціалізуйте його перед використанням." # AI Translated msgid "Changing fan speed during printing may affect print quality, please choose carefully." msgstr "Зміна швидкості вентилятора під час друку може вплинути на якість друку, обирайте обережно." msgid "Change Anyway" msgstr "Змінити все одно" msgid "Off" msgstr "Вимк." msgid "Filter" msgstr "Фільтр" # AI Translated msgid "Enabling filtration redirects the right fan to filter gas, which may reduce cooling performance." msgstr "Увімкнення фільтрації спрямовує правий вентилятор на фільтрацію газу, що може погіршити ефективність охолодження." # AI Translated msgid "Enabling filtration during printing may reduce cooling and affect print quality. Please choose carefully." msgstr "Увімкнення фільтрації під час друку може погіршити охолодження та вплинути на якість друку. Обирайте обережно." msgid "The selected material only supports the current fan mode, and it can't be changed during printing." msgstr "Обраний матеріал підтримує тільки поточний режим вентилятора, і його не можна змінити під час друку." msgid "Cooling" msgstr "Охолодження" msgid "Heating" msgstr "Обігрів" msgid "Exhaust" msgstr "Вихлоп" msgid "Full Cooling" msgstr "Повне охолодження" msgid "Init" msgstr "Початок" msgid "Chamber" msgstr "Термокамера" # AI Translated msgid "Innerloop" msgstr "Внутрішній контур" msgid "Top" msgstr "Верх" # AI Translated msgid "The fan controls the temperature during printing to improve print quality. The system automatically adjusts the fan's switch and speed according to different printing materials." msgstr "Вентилятор керує температурою під час друку, щоб покращити його якість. Система автоматично регулює вмикання та швидкість вентилятора відповідно до різних матеріалів друку." # AI Translated msgid "Cooling mode is suitable for printing PLA/PETG/TPU materials and filters the chamber air." msgstr "Режим охолодження підходить для друку матеріалами PLA/PETG/TPU і фільтрує повітря камери." # AI Translated msgid "Heating mode is suitable for printing ABS/ASA/PC/PA materials and circulates filters the chamber air." msgstr "Режим нагрівання підходить для друку матеріалами ABS/ASA/PC/PA та фільтрує повітря камери через внутрішню циркуляцію." # AI Translated msgid "Strong cooling mode is suitable for printing PLA/TPU materials. In this mode, the printouts will be fully cooled." msgstr "Режим інтенсивного охолодження підходить для друку матеріалами PLA/TPU. У цьому режимі надруковані деталі повністю охолоджуються." msgid "Cooling mode is suitable for printing PLA/PETG/TPU materials." msgstr "Режим охолодження підходить для друку матеріалами PLA/PETG/TPU." msgctxt "air_duct" msgid "Right(Aux)" msgstr "Правий(Вент)" msgctxt "air_duct" msgid "Right(Filter)" msgstr "Правий(Фільтр)" msgctxt "air_duct" msgid "Left(Aux)" msgstr "Лівий(Вент)" # AI Translated msgctxt "Hotend Heat Breaker Fan" msgid "Hotend" msgstr "Хотенд" msgid "Parts" msgstr "Частини" msgid "Aux" msgstr "Вент" msgid "Nozzle1" msgstr "Сопло1" msgid "MC Board" msgstr "MC Board" msgid "Heat" msgstr "Обігрів" msgid "Fan" msgstr "Вентилятор" msgid "Idling..." msgstr "Очікування..." msgid "Heat the nozzle" msgstr "Нагрійте сопло" msgid "Cut filament" msgstr "Відрізати філамент" msgid "Pull back the current filament" msgstr "Відтягніть поточний філамент" msgid "Push new filament into extruder" msgstr "Вставте новий філамент в екструдер" msgid "Grab new filament" msgstr "Візьміть новий філамент" msgid "Purge old filament" msgstr "Очистити від старого філаменту" msgid "Confirm extruded" msgstr "Підтвердити витіснення" msgid "Check filament location" msgstr "Перевірити розташування філаменту" msgid "Switch" msgstr "Перемкнутий" msgid "hotend" msgstr "хотенд" msgid "Wait for AMS cooling" msgstr "Зачекати на охолодження AMS" # AI Translated msgid "Switch current filament at Filament Track Switch" msgstr "Перемкнути поточний філамент на Filament Track Switch" # AI Translated msgid "Pull back current filament at Filament Track Switch" msgstr "Відвести назад поточний філамент на Filament Track Switch" # AI Translated msgid "Switch track at Filament Track Switch" msgstr "Перемкнути доріжку на Filament Track Switch" msgid "The maximum temperature cannot exceed " msgstr "Максимальна температура не повинна перевищувати " msgid "The minmum temperature should not be less than " msgstr "Мінімальна температура не повинна бути нижчою ніж " msgid "Type to filter..." msgstr "Вводьте для фільтру..." msgid "All" msgstr "Усі" msgid "No selected items..." msgstr "Нема вибраних елементів..." msgid "All items selected..." msgstr "Усі елементи вибрано..." msgid "No matching items..." msgstr "Нема відповідних елементів..." msgid "Deselect All" msgstr "Скасувати вибір всіх" msgid "Select visible" msgstr "Вибрати видиме" msgid "Deselect visible" msgstr "Скасувати вибрі видимого" msgid "Filter selected" msgstr "Фільтр вибрано" msgid "Filter nonSelected" msgstr "Фільтр не вибрано" msgid "Simple settings" msgstr "Прості налаштування" msgid "Advanced settings" msgstr "Розширені налаштування" msgid "Expert settings" msgstr "Експертні налаштування" msgid "Developer mode" msgstr "Режим розробника" msgid "Launch troubleshoot center" msgstr "Запустити центр вирішення проблем" msgid "Set nozzle count" msgstr "Вказати кількість сопел" msgid "Please set nozzle count" msgstr "Будь ласка, вкажіть кількість сопел" # AI Translated msgid "Error: Can not set both nozzle count to zero." msgstr "Помилка: не можна встановити нульову кількість для обох сопел." #, c-format, boost-format msgid "Error: Nozzle count can not exceed %d." msgstr "Помилка: Кількість сопел не повинна перевищувати %d." msgid "Confirm" msgstr "Підтвердити" msgid "Extruder" msgstr "Екструдер" msgid "Nozzle Selection" msgstr "Вибір сопла" msgid "Available Nozzles" msgstr "Доступні сопла" msgid "Nozzle Info" msgstr "Інформація про сопло" msgid "Sync Nozzle status" msgstr "Стан синхронізації сопла" # AI Translated msgid "Caution: Mixing nozzle diameters in one print is not supported. If the selected size is only on one extruder, single-extruder printing will be enforced." msgstr "Увага: змішування діаметрів сопел в одному друці не підтримується. Якщо вибраний розмір є лише на одному екструдері, буде примусово застосовано друк одним екструдером." #, c-format, boost-format msgid "Refresh %d/%d..." msgstr "Оновлення %d/%d..." # AI Translated msgid "Unknown nozzle detected. Refresh to update info (unrefreshed nozzles will be excluded during slicing). Verify nozzle diameter & flow rate against displayed values." msgstr "Виявлено невідоме сопло. Оновіть, щоб отримати актуальну інформацію (неоновлені сопла буде виключено під час нарізки). Перевірте діаметр сопла та швидкість потоку відповідно до показаних значень." # AI Translated msgid "Unknown nozzle detected. Refresh to update (unrefreshed nozzles will be skipped in slicing)." msgstr "Виявлено невідоме сопло. Оновіть інформацію (неоновлені сопла буде пропущено під час нарізки)." # AI Translated msgid "Please confirm whether the required nozzle diameter and flow rate match the currently displayed values." msgstr "Підтвердьте, чи потрібні діаметр сопла та швидкість потоку відповідають поточним показаним значенням." # AI Translated msgid "Your printer has different nozzles installed. Please select a nozzle for this print." msgstr "На вашому принтері встановлено різні сопла. Виберіть сопло для цього друку." msgid "Ignore" msgstr "Ігнорувати" msgid "Done." msgstr "Готово." msgid "" "All the selected objects are on a locked plate.\n" "Cannot auto-arrange these objects." msgstr "" "Всі вибрані обʼєкти знаходяться на заблокованій пластині,\n" "Ми не можемо виконати автоматичне впорядкування цих обʼєктів." msgid "No arrangeable objects are selected." msgstr "Не вибрано жодного доступного для впорядкування обʼєкта." msgid "" "This plate is locked.\n" "Cannot auto-arrange on this plate." msgstr "" "Ця пластина заблокована,\n" "Ми не можемо зробити автоматичне впорядкування на цій пластині." msgid "Arranging..." msgstr "Організація..." msgid "Arranging" msgstr "Організація" # AI Translated msgid "Arranging " msgstr "Впорядкування " msgid "Arranging canceled." msgstr "Організацію скасовано." msgid "Arranging complete, but some items were not able to be arranged. Reduce spacing and try again." msgstr "Розташування завершено, але не все вмістилося на столі. Зменште інтервал розміщення та спробуйте ще раз." msgid "Arranging done." msgstr "Організація зроблена." msgid "Arrange failed. Found some exceptions when processing object geometries." msgstr "Помилка впорядкування. Виявлено деякі винятки під час обробки геометрії моделей." #, c-format, boost-format msgid "" "Arrangement ignored the following objects which can't fit into a single bed:\n" "%s" msgstr "" "При впорядкуванні були проігноровані такі моделі, які не вмістилися на одному столі:\n" "%s" msgid "" "All the selected objects are on a locked plate.\n" "Cannot auto-orient these objects." msgstr "" "Всі вибрані обʼєкти знаходяться на заблокованій пластині,\n" "Ми не можемо робити автоорієнтацію на цих обʼєктах." msgid "" "This plate is locked.\n" "Cannot auto-orient on this plate." msgstr "" "Ця пластина заблокована,\n" "Ми не можемо зробити автоорієнтацію на цій пластині." msgid "Orienting..." msgstr "Орієнтування..." msgid "Orienting" msgstr "Орієнтація" msgid "Orienting canceled." msgstr "Орієнтування скасоване." msgid "Filling" msgstr "Заповнення" msgid "Bed filling canceled." msgstr "Заповнення ліжка скасоване." msgid "Bed filling done." msgstr "Заповнення ліжка виконане." msgid "Searching for optimal orientation" msgstr "Пошук оптимальної орієнтації" msgid "Orientation search canceled." msgstr "Пошук орієнтації скасовано." msgid "Orientation found." msgstr "Орієнтація знайдена." msgid "Logging in" msgstr "Вхід до системи" msgid "Login failed" msgstr "Помилка входу" msgid "Please check the printer network connection." msgstr "Будь ласка, перевірте підключення принтера до мережі." msgid "Abnormal print file data: please slice again." msgstr "Неправильний друк даних файлу. Будь ласка, наріжте ще раз." msgid "Task canceled." msgstr "Завдання скасовано." msgid "Upload task timed out. Please check the network status and try again." msgstr "Тайм-аут завантаження завдання. Будь ласка, перевірте статус мережі і спробуйте ще раз." msgid "Cloud service connection failed. Please try again." msgstr "Не вдалося підключитися до хмарного сервісу. Будь ласка, спробуйте ще раз." msgid "Print file not found; please slice again." msgstr "Файл друку не знайдено, наріжте ще раз." msgid "The print file exceeds the maximum allowable size (1GB). Please simplify the model and slice again." msgstr "Розмір друкованого файлу перевищує максимально допустимий розмір (1 ГБ). Будь ласка, спростіть модель і знову виконайте нарізку." msgid "Failed to send the print job. Please try again." msgstr "Не вдалося надіслати завдання на друк. Будь ласка, спробуйте ще раз." msgid "Failed to upload file to ftp. Please try again." msgstr "Не вдалося завантажити файл на FTP. Спробуйте ще раз." msgid "Check the current status of the Bambu Lab server by clicking on the link above." msgstr "Перевірте поточний стан сервера Bambu Lab, натиснувши на посилання вище." msgid "The size of the print file is too large. Please adjust the file size and try again." msgstr "Розмір файлу друку занадто великий. Будь ласка, зменште розмір файлу і спробуйте ще раз." msgid "Print file not found; please slice it again and send it for printing." msgstr "Файл друку не знайдено; будь ласка, знову наріжте його і відправте для друку." msgid "Failed to upload print file via FTP. Please check the network status and try again." msgstr "Не вдалося завантажити файл друку на FTP. Будь ласка, перевірте стан мережі і спробуйте ще раз." msgid "Sending print job over LAN" msgstr "Надсилання завдання на друк локальною мережею" msgid "Sending print job through cloud service" msgstr "Надсилання завдання на друк через хмарний сервіс" msgid "Print task sending times out." msgstr "Час відправлення завдання на друк закінчився." msgid "Service Unavailable" msgstr "Сервіс недоступний" msgid "Unknown Error." msgstr "Невідома помилка." msgid "Sending print configuration" msgstr "Надсилання конфігурації друку" #, c-format, boost-format msgid "Successfully sent. Will automatically jump to the device page in %ss" msgstr "Успішно надіслано. Автоматично перейде на сторінку пристрою в %sс" #, c-format, boost-format msgid "Successfully sent. Will automatically jump to the next page in %ss" msgstr "Успішно відправлено. Автоматично перейде на наступну сторінку через %sс" #, c-format, boost-format msgid "Access code:%s IP address:%s" msgstr "Код доступу:%s IP-адреса:%s" msgid "A Storage needs to be inserted before printing via LAN." msgstr "Перед друком через LAN потрібно вставити сховище." # AI Translated msgid "Sending print job over LAN, but the Storage in the printer is abnormal and print-issues may be caused by this." msgstr "Завдання друку надсилається через LAN, але сховище в принтері працює нештатно, і це може спричинити проблеми з друком." msgid "The Storage in the printer is abnormal. Please replace it with a normal Storage before sending print job to printer." msgstr "Сховище в принтері незвичне. Будь ласка, замініть на нормальне сховище перед надсиланням завдання друку на принтер." msgid "The Storage in the printer is read-only. Please replace it with a normal Storage before sending print job to printer." msgstr "Сховище в принтері лише для читання. Будь ласка, замініть на нормальне сховище перед надсиланням завдання друку на принтер." msgid "Encountered an unknown error with the Storage status. Please try again." msgstr "Виникла невідома помилка зі станом сховища. Будь ласка, спробуйте ще раз." msgid "Sending G-code file over LAN" msgstr "Надсилання файлу G-коду по локальній мережі" msgid "Sending G-code file to SD card" msgstr "Надсилання файлу G-коду на SD-карту" #, c-format, boost-format msgid "Successfully sent. Close current page in %s s" msgstr "Успішно надіслано. Закрити поточну сторінку в %sс" msgid "Storage needs to be inserted before sending to printer." msgstr "Перед надсиланням на принтер потрібно вставити сховище." msgid "Sending G-code file over LAN, but the Storage in the printer is abnormal and print-issues may be caused by this." msgstr "Надсилання файлу G-коду через LAN, але сховище в принтері проблемне і можуть виникнути проблеми з друком." msgid "The Storage in the printer is abnormal. Please replace it with a normal Storage before sending to printer." msgstr "Сховище в принтері проблемне. Будь ласка, замініть його на нормальне перед надсиланням на принтер." msgid "The Storage in the printer is read-only. Please replace it with a normal Storage before sending to printer." msgstr "Сховище в принтері лише для читання. Будь ласка, замініть його на нормальне перед надсиланням на принтер." msgid "Bad input data for EmbossCreateObjectJob." msgstr "Погані дані входу для EmbossCreateObjectJob." msgid "Add Emboss text object" msgstr "Додати об’єкт рельєвного тексту" msgid "Bad input data for EmbossUpdateJob." msgstr "Погані дані вводу для EmbossUpdateJob." msgid "Created text volume is empty. Change text or font." msgstr "Створений обʼєм тексту порожній. Змініть текст або шрифт." msgid "Bad input data for CreateSurfaceVolumeJob." msgstr "Неправильні дані вводу для CreateSurfaceVolumeJob." msgid "Bad input data for UseSurfaceJob." msgstr "Неправильні дані вводу для UseSurfaceJob." #. TRN: This is the title of the action appearing in undo/redo stack. #. It is same for Text and SVG. msgid "Emboss attribute change" msgstr "Зміна атрибута рельєфу" msgid "Add Emboss text Volume" msgstr "Додати об’єм тексту з рельєфом" msgid "Font doesn't have any shape for given text." msgstr "Шрифт не має жодної форми для вказаного тексту." msgid "There is no valid surface for text projection." msgstr "Немає дійсної поверхні для проекції тексту." msgid "An unexpected error occurred" msgstr "Сталася неочікувана помилка" msgid "Thermal Preconditioning for first layer optimization" msgstr "Термічна підготовка для оптимізації першого шару" msgid "Remaining time: Calculating..." msgstr "Час, що залишився: Обчислення..." # AI Translated msgid "The heated bed's thermal preconditioning helps optimize the first layer print quality. Printing will start once preconditioning is complete." msgstr "Попереднє прогрівання підігрівного столу допомагає оптимізувати якість першого шару. Друк почнеться після завершення прогрівання." #, c-format, boost-format msgid "Remaining time: %dmin%ds" msgstr "Час, що залишився: %dхв%dс" msgid "Importing SLA archive" msgstr "Імпорт архіву SLA" # AI Translated msgid "The SLA archive doesn't contain any presets. Please activate some SLA printer presets first before importing that SLA archive." msgstr "Архів SLA не містить пресетів. Будь ласка, спочатку активуйте пресети SLA-принтера, перш ніж імпортувати цей архів SLA." msgid "Importing canceled." msgstr "Імпорт скасовано." msgid "Importing done." msgstr "Імпорт виконано." msgid "The imported SLA archive did not contain any presets. The current SLA presets were used as fallback." msgstr "Імпортований архів SLA не містить жодних профілів. Поточні профілі SLA використовувалися в якості резервних." msgid "You cannot load an SLA project with a multi-part object on the bed" msgstr "Ви не можете завантажити проект SLA зі складеним обʼєктом на столі" msgid "Please check your object list before preset changing." msgstr "Будь ласка, перевірте список моделей перед зміною профілю." msgid "Attention!" msgstr "Увага!" msgid "Downloading" msgstr "Завантаження" msgid "Download failed" msgstr "Помилка завантаження" msgid "Canceled" msgstr "Скасовано" msgid "Installed successfully" msgstr "Успішне встановлення." msgid "Installing" msgstr "Встановлення" msgid "Install failed" msgstr "Встановлення не вдалося" # AI Translated msgid "License Info" msgstr "Інформація про ліцензію" msgid "Copyright" msgstr "Авторські права" msgid "License" msgstr "Ліцензія" msgid "Orca Slicer is licensed under " msgstr "Orca Slicer знаходиться під ліцензією " msgid "GNU Affero General Public License, version 3" msgstr "Стандартна громадська ліцензія GNU Affero, версія 3" msgid "Orca Slicer is based on PrusaSlicer and BambuStudio" msgstr "Orca Slicer базується на PrusaSlicer та BambuStudio" msgid "Libraries" msgstr "Бібліотеки" msgid "This software uses open source components whose copyright and other proprietary rights belong to their respective owners" msgstr "" "Це програмне забезпечення використовує компоненти з відкритим вихідним кодом,авторські права та інші\n" "права власності належать їх відповідним власникам" #, c-format, boost-format msgid "About %s" msgstr "Про %s" # AI Translated msgid "Open-source slicing stands on a tradition of collaboration and attribution. Slic3r, created by Alessandro Ranellucci and the RepRap community, laid the foundation. PrusaSlicer by Prusa Research built on that work, Bambu Studio forked from PrusaSlicer, and SuperSlicer extended it with community-driven enhancements. Each project carried the work of its predecessors forward, crediting those who came before." msgstr "Нарізка з відкритим кодом спирається на традицію співпраці та зазначення авторства. Slic3r, створений Алессандро Ранеллуччі та спільнотою RepRap, заклав основу. PrusaSlicer від Prusa Research розвинув цю роботу, Bambu Studio відгалузився від PrusaSlicer, а SuperSlicer розширив його вдосконаленнями від спільноти. Кожен проєкт продовжував роботу своїх попередників, віддаючи належне тим, хто був до нього." # AI Translated msgid "OrcaSlicer began in that same spirit, drawing from PrusaSlicer, BambuStudio, SuperSlicer, and CuraSlicer. But it has since grown far beyond its origins — introducing advanced calibration tools, precise wall and seam control and hundreds of other features." msgstr "OrcaSlicer народився в тому ж дусі, спираючись на PrusaSlicer, BambuStudio, SuperSlicer і CuraSlicer. Але відтоді він далеко переріс своє походження — з'явилися розширені інструменти калібрування, точне керування стінками та швами й сотні інших функцій." # AI Translated msgid "Today, OrcaSlicer is the most widely used and actively developed open-source slicer in the 3D printing community. Many of its innovations have been adopted by other slicers, making it a driving force for the entire industry." msgstr "Сьогодні OrcaSlicer — це найпоширеніший і найактивніше розвинений слайсер з відкритим кодом у спільноті 3D-друку. Багато його нововведень перейняли інші слайсери, що робить його рушійною силою для всієї галузі." msgid "AMS Materials Setting" msgstr "Налаштування матеріалів AMS" msgid "Close" msgstr "Закрити" msgid "" "Nozzle\n" "Temperature" msgstr "" "Температура\n" "сопла" msgid "max" msgstr "макс" msgid "min" msgstr "мін" #, boost-format msgid "The input value should be greater than %1% and less than %2%" msgstr "Вхідне значення має бути більше %1% і менше %2%" msgid "Factors of Flow Dynamics Calibration" msgstr "Фактори Калібрування динамічного потоку" msgid "Wiki Guide" msgstr "Вікі-підручник" msgid "PA Profile" msgstr "Профіль PA" msgid "Factor K" msgstr "Коеф. K" msgid "Factor N" msgstr "Коеф. N" msgid "Setting AMS slot information while printing is not supported" msgstr "Зміна інформації про слоти AMS під час друку не підтримується" msgid "Setting Virtual slot information while printing is not supported" msgstr "Налаштування інформації віртуального слота під час друку не підтримується" msgid "Are you sure you want to clear the filament information?" msgstr "Ви впевнені, що хочете видалити інформацію про філамент?" msgid "You need to select the material type and color first." msgstr "Спочатку потрібно вибрати тип матеріалу та колір." #, c-format, boost-format msgid "Please input a valid value (K in %.1f~%.1f)" msgstr "Будь ласка введіть коректне значення (K в %.1f~%.1f)" #, c-format, boost-format msgid "Please input a valid value (K in %.1f~%.1f, N in %.1f~%.1f)" msgstr "Будь ласка введіть коректне значення (K в %.1f~%.1f, N в %.1f~%.1f)" # AI Translated msgid "" "The nozzle flow is not set. Please set the nozzle flow rate before editing the filament.\n" "'Device -> Print parts'" msgstr "" "Потік сопла не налаштовано. Установіть швидкість потоку сопла перед редагуванням філаменту.\n" "'Пристрій -> Деталі друку'" msgid "AMS" msgstr "AMS" msgid "Other Color" msgstr "Інший колір" msgid "Custom Color" msgstr "Власний колір" msgid "Dynamic flow calibration" msgstr "Калібрування динамічного потоку" msgid "The nozzle temp and max volumetric speed will affect the calibration results. Please fill in the same values as the actual printing. They can be auto-filled by selecting a filament preset." msgstr "Температура сопла та максимальна обʼємна швидкість вплинуть на результати калібрування. Будь ласка, введіть такі ж значення, як при друці. Вони можуть бути заповнені автоматично при виборі профілю філаменту." msgid "Nozzle Diameter" msgstr "Діаметр сопла" msgid "Plate Type" msgstr "Тип Пластини" msgid "Nozzle temperature" msgstr "Температура сопла" msgid "Bed Temperature" msgstr "Температура столу" msgid "Max volumetric speed" msgstr "Максимальна обʼємна швидкість" msgid "℃" msgstr "℃" msgid "Bed temperature" msgstr "Температура столу" msgid "mm³" msgstr "мм³" # AI Translated msgid "Start" msgstr "Почати" msgid "Next" msgstr "Наступний" msgid "Calibration completed. Please find the most uniform extrusion line on your hot bed like the picture below, and fill the value on its left side into the factor K input box." msgstr "Калібрування завершено. Тепер знайдіть на столі найбільш рівномірно екструдовану лінію, як показано нижче, і введіть це значення в поле введення коефіцієнта K." msgid "Save" msgstr "Зберегти" msgctxt "Navigation" msgid "Back" msgstr "Ззаду" msgid "Example" msgstr "Приклад" #, c-format, boost-format msgid "Calibrating... %d%%" msgstr "Калібрування... %d%%" msgid "Calibration completed" msgstr "Калібрування завершено" #, c-format, boost-format msgid "%s does not support %s" msgstr "%s не підтримує %s" msgid "Step" msgstr "Крок" # AI Translated msgid "Unmapped" msgstr "Не зіставлено" # AI Translated msgid "" "Upper half area: Original\n" "Lower half area: The filament from original project will be used when unmapped.\n" "And you can click it to modify" msgstr "" "Верхня половина: Оригінал\n" "Нижня половина: за відсутності зіставлення буде використано філамент з оригінального проєкту.\n" "Ви можете натиснути, щоб змінити" # AI Translated msgid "" "Upper half area: Original\n" "Lower half area: Filament in AMS\n" "And you can click it to modify" msgstr "" "Верхня половина: Оригінал\n" "Нижня половина: Філамент в AMS\n" "Ви можете натиснути, щоб змінити" # AI Translated msgid "" "Upper half area: Original\n" "Lower half area: Filament in AMS\n" "And you cannot click it to modify" msgstr "" "Верхня половина: Оригінал\n" "Нижня половина: Філамент в AMS\n" "Ви не можете натиснути, щоб змінити" msgid "AMS Slots" msgstr "Слоти AMS" msgid "Please select from the following filaments" msgstr "Будь ласка, виберіть з наведених філаментів" # AI Translated #, c-format, boost-format msgid "Select filament that installed to the %s" msgstr "Виберіть філамент, встановлений у %s" msgid "Left AMS" msgstr "Лівий AMS" msgid "External" msgstr "Зовнішні" msgid "Reset current filament mapping" msgstr "Скинути поточну організацію філаменту" msgid "Right AMS" msgstr "Правий AMS" #, c-format, boost-format msgid "Printing with the current nozzle may produce an extra %0.2f g of waste." msgstr "Друк поточним соплом може продукувати надлишкових %0.2f г." # AI Translated #, c-format, boost-format msgid "Tips: the filament type(%s) does not match with the filament type(%s) in the slicing file. If you want to use this slot, you can install %s instead of %s and change slot information on the 'Device' page." msgstr "Порада: тип філаменту (%s) не збігається з типом філаменту (%s) у файлі нарізки. Якщо ви хочете використати цей слот, ви можете встановити %s замість %s і змінити інформацію про слот на сторінці 'Пристрій'." # AI Translated #, c-format, boost-format msgid "Cannot select: the filament type(%s) does not match with the filament type(%s) in the slicing file. If you want to use this slot, you can install %s instead of %s and change slot information on the 'Device' page." msgstr "Неможливо вибрати: тип філаменту (%s) не збігається з типом філаменту (%s) у файлі нарізки. Якщо ви хочете використати цей слот, ви можете встановити %s замість %s і змінити інформацію про слот на сторінці 'Пристрій'." # AI Translated #, c-format, boost-format msgid "Cannot select: the slot is empty or undefined. If you want to use this slot, you can install %s and change slot information on the 'Device' page." msgstr "Неможливо вибрати: слот порожній або не визначений. Якщо ви хочете використати цей слот, ви можете встановити %s і змінити інформацію про слот на сторінці 'Пристрій'." # AI Translated msgid "Cannot select: No filament loaded in current slot." msgstr "Неможливо вибрати: у поточному слоті немає завантаженого філаменту." msgid "Enable AMS" msgstr "Дозволити AMS" msgid "Print with filament in the AMS" msgstr "Друк філаментами в AMS" msgid "Disable AMS" msgstr "Вимкнути AMS" # AI Translated msgid "Print with filament on external spool" msgstr "Друк філаментом із зовнішньої котушки" msgid "Please change the desiccant when it is too wet. The indicator may not represent accurately in following cases: when the lid is open or the desiccant pack is changed. It takes a few hours to absorb the moisture, and low temperatures also slow down the process." msgstr "Будь ласка, змініть осушувач, коли він стає занадто вологим. Індикатор може не відображати точно в наступних випадках: коли кришка відкрита або пакет з осушувачем змінено. На поглинання вологи може знадобитися кілька годин, низькі температури також сповільнюють процес." msgid "Configure which AMS slot should be used for a filament used in the print job." msgstr "Налаштуйте, який слот AMS слід використовувати для нитки, яка використовується в завдання на друк" msgid "Filament used in this print job" msgstr "Філамент, який використовується в цьому завданні на друк" msgid "AMS slot used for this filament" msgstr "Слот AMS, який використовується для цього філаменту" msgid "Click to select AMS slot manually" msgstr "Натисніть, щоб вибрати слот AMS вручну" msgid "Do not Enable AMS" msgstr "Не вмикати АМS" # AI Translated msgid "Print using filament on external spool." msgstr "Друк із використанням філаменту, встановленого на зовнішній котушці" # AI Translated msgid "Print with filament in AMS" msgstr "Друк філаментами в AMS" # AI Translated msgctxt "Nozzle position" msgid "Left" msgstr "Ліве" # AI Translated msgctxt "Nozzle position" msgid "Right" msgstr "Праве" msgid "When the current material run out, the printer will continue to print in the following order." msgstr "Коли поточний матеріал закінчується, принтер буде продовжувати друк у наступному порядку." msgid "Identical filament: same brand, type and color." msgstr "Ідентичний філамент: той самий бренд, тип і колір." msgid "Group" msgstr "Група" # AI Translated msgid "When the current material runs out, the printer would use identical filament to continue printing." msgstr "Коли поточний матеріал закінчиться, принтер продовжить друк ідентичним філаментом." msgid "The printer does not currently support auto refill." msgstr "Принтер не підтримує функцію автозаправлення." # AI Translated msgid "AMS filament backup is not enabled; please enable it in the AMS settings." msgstr "Резервне копіювання філаменту в AMS не увімкнено, будь ласка, увімкніть його в налаштуваннях AMS." # AI Translated msgid "" "When the current filament runs out, the printer will use identical filament to continue printing.\n" "*Identical filament: same brand, type and color." msgstr "" "Коли поточний філамент закінчиться, принтер продовжить друк ідентичним філаментом.\n" "*Ідентичний філамент: той самий бренд, тип і колір." msgid "DRY" msgstr "СУХИЙ" msgid "WET" msgstr "ВОЛОГИЙ" msgid "AMS Settings" msgstr "Налаштування AMS" msgid "Insertion update" msgstr "Оновлювати дані при вставці матеріалу" msgid "The AMS will automatically read the filament information when inserting a new Bambu Lab filament spool. This takes about 20 seconds." msgstr "AMS автоматично зчитає інформацію про філамент при вставці нового філаменту Bambu Lab. Це займає близько 20 секунд." msgid "Note: if a new filament is inserted during printing, the AMS will not automatically read any information until printing is completed." msgstr "Примітка: якщо під час друку вставляється нова пластикова нитка, AMS автоматично зчитає інформацію про неї лише після завершення друку." msgid "When inserting a new filament, the AMS will not automatically read its information, leaving it blank for you to enter manually." msgstr "При вставці нової пластикової нитки, AMS не буде автоматично зчитуватиме інформацію про неї, залишаючи поле порожнім, щоб користувач міг ввести дані про неї вручну." msgid "Update on startup" msgstr "Оновити дані при увімкненні принтера" # AI Translated msgid "The AMS will automatically read the information of inserted filament on start-up. It will take about 1 minute. The reading process will rotate the filament spools." msgstr "AMS автоматично зчитає інформацію про вставлений філамент під час запуску. Це займе близько 1 хвилини. У процесі зчитування котушки з філаментом обертатимуться." msgid "The AMS will not automatically read information from inserted filament during startup and will continue to use the information recorded before the last shutdown." msgstr "" "AMS не буде автоматично зчитувати інформацію про вставлений філамент\n" "під час запуску і продовжуватиме використовувати інформацію, записану до\n" "останнтого вимкнення." msgid "Update remaining capacity" msgstr "Оновлювати ємність, що залишилася" # AI Translated msgid "AMS will attempt to estimate the remaining capacity of the Bambu Lab filaments." msgstr "AMS спробує оцінити залишок філаментів Bambu Lab." msgid "AMS filament backup" msgstr "Резервування матеріалу AMS" msgid "AMS will continue to another spool with matching filament properties automatically when current filament runs out." msgstr "AMS перейде на іншу котушку з тими самими властивостями автоматично, коли поточний філамент закінчиться" msgid "Air Printing Detection" msgstr "Виявлення пустого друку" msgid "Detects clogging and filament grinding, halting printing immediately to conserve time and filament." msgstr "Виявляє засмічення та стирання нитки, негайно зупиняючи друк для економії часу та матеріалу." msgid "AMS Type" msgstr "Тип AMS" msgid "Switching" msgstr "Перемикання" msgid "The printer is busy and cannot switch AMS type." msgstr "Принтер зайнятий і не може перемкнути тип AMS." msgid "Please unload all filament before switching." msgstr "Будь ласка, вивантажте весь філамент перед перемиканням." # AI Translated msgid "AMS type switching needs firmware update, taking about 30s. Switch now?" msgstr "Перемикання типу AMS потребує оновлення прошивки, це триває близько 30 с. Перемкнути зараз?" # AI Translated msgid "Arrange AMS Order" msgstr "Упорядкувати AMS" # AI Translated msgid "AMS ID will be reset. If you want a specific ID sequence, disconnect all AMS before resetting and connect them in the desired order after resetting." msgstr "Ідентифікатори AMS буде скинуто. Якщо вам потрібна певна послідовність ID, відключіть усі AMS перед скиданням і підключіть їх у потрібному порядку після скидання." msgid "File" msgstr "Файл" msgid "Calibration" msgstr "Калібрування" msgid "Failed to download the plug-in. Please check your firewall settings and VPN software and retry." msgstr "" "Не вдалося завантажити плагін. Будь ласка, перевірте налаштування брандмауера та vpn\n" "Програмне забезпечення, перевірте та повторіть спробу." # AI Translated msgid "Failed to install the plug-in. The plug-in file may be in use. Please restart OrcaSlicer and try again. Also check whether it is blocked or has been deleted by anti-virus software." msgstr "Не вдалося встановити плагін. Файл плагіна може використовуватися. Перезапустіть OrcaSlicer і спробуйте ще раз. Також перевірте, чи не заблоковано або не видалено його антивірусним програмним забезпеченням." msgid "Click here to see more info" msgstr "натисніть тут, щоб побачити більше інформації" # AI Translated msgid "The network plug-in was installed but could not be loaded. Please restart the application." msgstr "Мережевий плагін встановлено, але не вдалося завантажити. Перезапустіть застосунок." msgid "Restart Required" msgstr "Потрібен перезапуск" msgid "Please home all axes (click " msgstr "Поверніть всі осі у вихідне положення (натисніть " msgid ") to locate the toolhead's position. This prevents device moving beyond the printable boundary and causing equipment wear." msgstr ") для визначення положення друкованої голови. Це передбачає переміщення за межі області друку та розмір обладнання." msgid "Go Home" msgstr "На головну" # AI Translated msgid "An error occurred. The system may have run out of memory, or a bug may have occurred." msgstr "Сталася помилка. Можливо, у системі закінчилася памʼять або виникла помилка програми." #, boost-format msgid "A fatal error occurred: \"%1%\"" msgstr "Відбулася фатальна помилка: \"%1%\"" msgid "Please save your project and restart the application." msgstr "Збережіть проект і перезапустіть програму." msgid "Processing G-Code from previous file…" msgstr "Обробка G-коду з попереднього файлу..." msgid "Slicing complete" msgstr "Нарізка завершена" msgid "Access violation" msgstr "Порушення прав доступу" msgid "Illegal instruction" msgstr "Недопустима інструкція" msgid "Divide by zero" msgstr "Ділити на нуль заборонено" msgid "Overflow" msgstr "Перелив" msgid "Underflow" msgstr "Недолив" msgid "Floating reserved operand" msgstr "Плаваючий зарезервований операнд" msgid "Stack overflow" msgstr "Переповнення стека" msgid "Running post-processing scripts" msgstr "Запуск скриптів постобробки" msgid "Successfully executed post-processing script" msgstr "Скрипт післяобробки успішно виконаний" msgid "Unknown error occurred during exporting G-code." msgstr "Під час експорту G-коду сталася невідома помилка." #, boost-format msgid "" "Copying of the temporary G-code to the output G-code failed. Maybe the SD card is write locked?\n" "Error message: %1%" msgstr "" "Не вдалося скопіювати тимчасовий G-код у місцезнаходження вихідного файлу G-коду. Чи може ваша SD карта захищена від запису?\n" "Повідомлення про помилку: %1%" #, boost-format msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp." msgstr "Не вдалося скопіювати тимчасовий G-код у вихідний G-код. Можливо, проблема з цільовим пристроєм, спробуйте експортувати ще раз або використати інший пристрій. Пошкоджений вихідний G-код - %1% .tmp." #, boost-format msgid "Renaming of the G-code after copying to the selected destination folder has failed. Current path is %1%.tmp. Please try exporting again." msgstr "Не вдалося перейменувати G-код після копіювання у вибрану папку призначення. Поточний шлях - %1%.tmp. Спробуйте експортувати ще раз." #, boost-format msgid "Copying of the temporary G-code has finished but the original code at %1% couldn't be opened during copy check. The output G-code is at %2%.tmp." msgstr "Копіювання тимчасового G-коду закінчено, але оригінальний код на рівні %1% не вдалося відкрити під час перевірки копії. Вихідний G-код - %2% .tmp." #, boost-format msgid "Copying of the temporary G-code has finished but the exported code couldn't be opened during copy check. The output G-code is at %1%.tmp." msgstr "Копіювання тимчасового G-коду завершено, але експортований код не вдалося відкрити під час перевірки копії. Вихідний G-код - %1% .tmp." #, boost-format msgid "G-code file exported to %1%" msgstr "Файл G-коду експортується до %1%" msgid "Unknown error with G-code export" msgstr "Невідома помилка під час експорту G-коду." #, boost-format msgid "" "Failed to save G-code file.\n" "Error message: %1%.\n" "Source file %2%." msgstr "" "Не вдалося зберегти файл gcode.\n" "Повідомлення про помилку: %1%.\n" "Початковий файл %2%." msgid "Copying of the temporary G-code to the output G-code failed." msgstr "Не вдалося скопіювати тимчасовий G-код у вихідний G-код" #, boost-format msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue" msgstr "Планування завантаження в `%1%`. Див. вікно -> Черга завантаження на хост друку" msgid "Origin" msgstr "Початок координат" msgid "Size in X and Y of the rectangular plate." msgstr "Розмір по осях X та Y прямокутної пластини." msgid "Distance of the 0,0 G-code coordinate from the front left corner of the rectangle." msgstr "Відстань координати G-коду 0,0 від переднього лівого кута." msgid "Diameter of the print bed. It is assumed that origin (0,0) is located in the center." msgstr "Діаметр поверхні друку. Передбачається, що початок координат (0,0) знаходиться у центрі." msgid "Rectangular" msgstr "Прямокутний" msgid "Circular" msgstr "Округлий" msgid "Load shape from STL..." msgstr "Завантажити форму з STL..." msgid "Settings" msgstr "Налаштування" msgid "Remove" msgstr "Вилучити" msgid "Not found:" msgstr "Не знайдено:" msgid "Model" msgstr "Модель" msgid "Choose an STL file to import bed shape from:" msgstr "Виберіть файл STL для імпорту форми столу:" msgid "Invalid file format." msgstr "Неприпустимий формат файлу." msgid "Error: invalid model" msgstr "Помилка! Неприпустима модель" msgid "The selected file contains no geometry." msgstr "Вибраний файл не містить геометрії." msgid "The selected file contains several disjointed areas. This is not supported." msgstr "Вибраний файл містить кілька областей, що не перетинаються. Такі файли не підтримуються." msgid "Choose a file to import bed texture from (PNG/SVG):" msgstr "Виберіть файл для імпортування текстури столу (PNG/SVG)" msgid "Choose an STL file to import bed model from:" msgstr "Виберіть файл STL для імпорту моделі столу:" msgid "Bed Shape" msgstr "Форма столу" #, c-format, boost-format msgid "A minimum temperature above %d℃ is recommended for %s.\n" msgstr "Мінімальна температура вище %d℃ рекомендована для %s.\n" #, c-format, boost-format msgid "A maximum temperature below %d℃ is recommended for %s.\n" msgstr "Максимальна температура нижче %d℃ рекомендована для %s.\n" msgid "The recommended minimum temperature cannot be higher than the recommended maximum temperature.\n" msgstr "Мінімальна рекомендована температура не може бути вищою за максимальну рекомендовану температуру.\n" msgid "Please check.\n" msgstr "Будь ласка, перевірте.\n" # AI Translated msgid "" "The nozzle may become clogged when the temperature is out of the recommended range.\n" "Please make sure whether to use this temperature to print.\n" "\n" msgstr "" "Сопло може засмітитися, якщо температура виходить за межі рекомендованого діапазону.\n" "Переконайтеся, що ви дійсно хочете друкувати за цієї температури.\n" "\n" #, c-format, boost-format msgid "The recommended nozzle temperature for this filament type is [%d, %d] degrees Celsius." msgstr "Рекомендована температура сопла для цього типу нитки становить [%d, %d] градусів Цельсія" # AI Translated msgid "Adaptive Pressure Advance model validation failed:\n" msgstr "Не вдалося перевірити модель адаптивного Pressure Advance:\n" msgid "" "Too small max volumetric speed.\n" "Value was reset to 0.5" msgstr "" "Надто маленька максимальна обʼємна швидкість.\n" "Скинути до 0,5" #, c-format, boost-format msgid "Current chamber temperature is higher than the material's safe temperature; this may result in material softening and nozzle clogs. The maximum safe temperature for the material is %d" msgstr "Поточна температура камери вища, ніж безпечна температура матеріалу, це може призвести до розм’якшення матеріалу та його забивання. Максимально безпечна температура для цього матеріалу становить %d" # AI Translated #, c-format, boost-format msgid "The minimal chamber temperature (%d℃) is higher than the target chamber temperature (%d℃). The minimal value is the threshold at which printing starts while the chamber keeps heating toward the target, so it should not exceed it. It will be clamped to the target." msgstr "Мінімальна температура камери (%d℃) вища за цільову температуру камери (%d℃). Мінімальне значення — це поріг, за якого починається друк, поки камера продовжує нагріватися до цільової температури, тому воно не повинно її перевищувати. Значення буде обмежено цільовим." # AI Translated #, c-format, boost-format msgid "Layer height is too small. It will be set to the minimum (%g mm)." msgstr "Висота шару занадто мала. Буде встановлено мінімальне значення (%g мм)." # AI Translated msgid "Layer height is outside the limits set in Printer Settings -> Extruder -> Layer height limits, this may cause printing quality issues." msgstr "Висота шару виходить за межі, задані в Налаштуваннях принтера -> Екструдер -> Ліміти висоти шару, це може призвести до проблем з якістю друку." # AI Translated #, c-format, boost-format msgid "Adjust it to the limit (%g mm) automatically?" msgstr "Автоматично налаштувати до межі (%g мм)?" msgid "Adjust" msgstr "Налаштувати" msgid "" "Layer height too small\n" "It has been reset to 0.2" msgstr "" "Надто маленька висота шару.\n" "Скинути на 0.2" msgid "" "Ironing spacing too small\n" "It has been reset to 0.1" msgstr "" "Занадто маленька відстань між розглажуванням.\n" "Скинути на 0,1" msgid "" "Zero initial layer height is invalid.\n" "\n" "The first layer height will be reset to 0.2." msgstr "" "Нульова початкова висота шару недійсна.\n" "\n" "Висота першого шару буде скинуто до 0,2." # AI Translated msgid "" "This setting is only used for tuning model size by small amounts.\n" "For example, when the model size has small errors or when tolerances are incorrect. For large adjustments, please use the model scale function.\n" "\n" "The value will be reset to 0." msgstr "" "Цей параметр призначений лише для незначного коригування розміру моделі.\n" "Наприклад, коли розміри моделі мають невеликі похибки або допуски неточні. Для великих змін використовуйте функцію масштабування моделі.\n" "\n" "Це значення буде скинуто на 0." msgid "" "The elephant foot compensation value is too large.\n" "If there are significant elephant foot issues, please check other settings.\n" "The bed temperature may be too high, for example.\n" "\n" "The value will be reset to 0." msgstr "" "Занадто велика компенсація слонової стопи недоцільна.\n" "Якщо є серйозний ефект слонової стопи, перевірте інші параметри друку.\n" "Наприклад, чи не надто висока температура столу.\n" "\n" "Значення буде скинуто на 0." msgid "Alternate extra wall doesn't work well when ensure vertical shell thickness is set to All." msgstr "Чергування додаткової стінки не працює добре, якщо для параметра \"Забезпечити товщину вертикальної оболонки\" встановлено значення \"Всі\"." msgid "" "Change these settings automatically?\n" "Yes - Change ensure vertical shell thickness to Moderate and enable alternate extra wall\n" "No - Don't use alternate extra wall" msgstr "" "Змінити ці параметри автоматично?\n" "Так - Змінити значення «Забезпечити товщину вертикальної оболонки» на «Помірно» і включити чергування додаткової стінки\n" "Ні - Відмовитися від чергування додаткової стінки" msgid "" "Prime tower does not work when Adaptive Layer Height or Independent Support Layer Height is on.\n" "Which do you want to keep?\n" "YES - Keep Prime Tower\n" "NO - Keep Adaptive Layer Height and Independent Support Layer Height" msgstr "" "Підготовча вежа не працює, коли увімкнено функцію «Змінна висота шарів» або «Незалежна висота шарів підтримки»\n" "Що бажаєте залишити?\n" "ТАК - Залишити Підготовчу вежу\n" "НІ - Зберегти Змінну висоту шару та Незалежну висоту шарів підтримки" msgid "" "Prime tower does not work when Adaptive Layer Height is on.\n" "Which do you want to keep?\n" "YES - Keep Prime Tower\n" "NO - Keep Adaptive Layer Height" msgstr "" "Підготовча вежа не працює, коли увімкнено функцію «Змінна висота шарів»\n" "Що бажаєте залишити?\n" "ТАК - Залишити Підготовчу вежу\n" "НІ - Залишити Змінну висоту шару" msgid "" "Prime tower does not work when Independent Support Layer Height is on.\n" "Which do you want to keep?\n" "YES - Keep Prime Tower\n" "NO - Keep Independent Support Layer Height" msgstr "" "Підготовча вежа не працює, коли увімкнено функцію «Незалежна висота шарів підтримки»\n" "Що бажаєте залишити?\n" "ТАК - Залишити Підготовчу вежу\n" "НІ - Залишити незалежну висоту шарів підтримки" msgid "" "seam_slope_start_height needs to be smaller than layer_height.\n" "Reset to 0." msgstr "" "seam_slope_start_height має бути менше висоти шару.\n" "Значення скинуто на 0." # AI Translated #, no-c-format, no-boost-format msgid "" "Lock depth should be smaller than skin depth.\n" "Reset to 50% of skin depth." msgstr "" "Глибина зчеплення має бути меншою за глибину оболонки.\n" "Скинуто до 50% глибини оболонки." # AI Translated msgid "Both [Extrusion] and [Combined] modes of Fuzzy Skin require the Arachne Wall Generator to be enabled." msgstr "Обидва режими шорсткої поверхні — [Екструзія] та [Комбінований] — потребують увімкненого генератора стінок Arachne." # AI Translated msgid "" "Change these settings automatically?\n" "Yes - Enable Arachne Wall Generator\n" "No - Disable Arachne Wall Generator and set [Displacement] mode of the Fuzzy Skin" msgstr "" "Змінити ці налаштування автоматично?\n" "Так - Увімкнути генератор стінок Arachne\n" "Ні - Вимкнути генератор стінок Arachne і встановити режим [Зміщення] для шорсткої поверхні" # AI Translated msgid "Brim ear radius" msgstr "Радіус вушка кайми" msgid "Brim width" msgstr "Ширина кайми" # AI Translated msgid "Spiral mode only works when wall loops is 1, support is disabled, clumping detection by probing is disabled, top shell layers is 0, sparse infill density is 0 and timelapse type is traditional." msgstr "Спіральний режим працює лише тоді, коли кількість стінок дорівнює 1, підтримки вимкнено, виявлення налипання зондуванням вимкнено, кількість верхніх шарів оболонки дорівнює 0, щільність часткового заповнення дорівнює 0, а тип таймлапсу — традиційний." msgid " But machines with I3 structure will not generate timelapse videos." msgstr " Но принтери з кінематикою I3 не будуть писати таймлапс." msgid "" "Change these settings automatically?\n" "Yes - Change these settings and enable spiral/vase mode automatically\n" "No - Cancel enabling spiral mode" msgstr "" "Змінити ці налаштування автоматично?\n" "Так – змінити ці налаштування та автоматично включити режим спіральна ваза\n" "Ні - цього разу відмовитися від використання режиму спіральна ваза" msgid "N/A" msgstr "Н/Д" msgid "Printing" msgstr "Друк" msgid "Auto bed leveling" msgstr "Автоматичне вирівнювання столу" msgid "Heatbed preheating" msgstr "Попереднє нагрівання" msgid "Vibration compensation" msgstr "Компенсація вібрації" msgid "Changing filament" msgstr "Зміна філаменту" msgid "M400 pause" msgstr "M400 пауза" msgid "Paused (filament ran out)" msgstr "Призупинено (нитка закінчилася)" msgid "Heating nozzle" msgstr "Нагрівання сопла" msgid "Calibrating dynamic flow" msgstr "Калібрування динамічного потоку" msgid "Scanning bed surface" msgstr "Сканування поверхні столу" msgid "Inspecting first layer" msgstr "Перевірка першого шару" msgid "Identifying build plate type" msgstr "Визначення типу робочої пластини" msgid "Calibrating Micro Lidar" msgstr "Калібрування мікролідаром" msgid "Homing toolhead" msgstr "Паркування голови" msgid "Cleaning nozzle tip" msgstr "Очищення сопла" msgid "Checking extruder temperature" msgstr "Перевірка температури сопла" msgid "Paused by the user" msgstr "Призупинено користувачем" msgid "Pause (front cover fall off)" msgstr "Призупинено (передня кришка відкрита)" msgid "Calibrating the micro lidar" msgstr "Калібрування мікролідаром" # AI Translated msgid "Calibrating flow ratio" msgstr "Калібрування коефіцієнта потоку" msgid "Pause (nozzle temperature malfunction)" msgstr "Призупинено (не відповідна температура сопла)" msgid "Pause (heatbed temperature malfunction)" msgstr "Призупинено (не відповідна температура обігріву)" msgid "Filament unloading" msgstr "Вигрузка філаменту" # AI Translated msgid "Pause (step loss)" msgstr "Призупинено (втрата кроків)" msgid "Filament loading" msgstr "Завантаження філаменту" msgid "Motor noise cancellation" msgstr "Скасування шуму мотора" msgid "Pause (AMS offline)" msgstr "Призупинено (AMS поза мережею)" msgid "Pause (low speed of the heatbreak fan)" msgstr "Призупинено (низька швидкість вентилятора нагріву)" msgid "Pause (chamber temperature control problem)" msgstr "Призупинено (проблема контролю температури камери)" msgid "Cooling chamber" msgstr "Охолодження камери" msgid "Pause (G-code inserted by user)" msgstr "Призупинено (G-код вставлений користувачем)" msgid "Motor noise showoff" msgstr "Результат калібрування шуму двигуна" msgid "Pause (nozzle clumping)" msgstr "Призупинено (налипання сопла)" msgid "Pause (cutter error)" msgstr "Призупинено (помилка обрізання)" msgid "Pause (first layer error)" msgstr "Призупинено (помилка першого шару)" msgid "Pause (nozzle clog)" msgstr "Призупинено (забивання сопла)" msgid "Measuring motion precision" msgstr "Вимірювання точності руху" msgid "Enhancing motion precision" msgstr "Покращення точності руху" msgid "Measure motion accuracy" msgstr "Вимірювання акуратності руху" # AI Translated msgid "Nozzle offset calibration" msgstr "Калібрування зміщення сопла" msgid "High temperature auto bed leveling" msgstr "Авто-вирівнювання стола з високою температурою" # AI Translated msgid "Auto Check: Quick Release Lever" msgstr "Автоперевірка: важіль швидкого знімання" msgid "Auto Check: Door and Upper Cover" msgstr "Авто-перевірка: Двері і верхня кришка" msgid "Laser Calibration" msgstr "Калібрування лазера" msgid "Auto Check: Platform" msgstr "Авто-перевірка: Платформа" msgid "Confirming BirdsEye Camera location" msgstr "Підтвердження розташування камери BirdsEye" msgid "Calibrating BirdsEye Camera" msgstr "Калібрування камери BirdsEye" msgid "Auto bed leveling -phase 1" msgstr "Авто-вирівнювання столу -фаза 1 " msgid "Auto bed leveling -phase 2" msgstr "Авто-вирівнювання столу -фаза 2" msgid "Heating chamber" msgstr "Нагрівання камери" msgid "Cooling heatbed" msgstr "Охолодження столу" msgid "Printing calibration lines" msgstr "Друк калібрувальних ліній" msgid "Auto Check: Material" msgstr "Авто-перевірка: Матеріал" msgid "Live View Camera Calibration" msgstr "Калібрування камери живого перегляду" msgid "Waiting for heatbed to reach target temperature" msgstr "Очікування нагрівання до потрібної температури" msgid "Auto Check: Material Position" msgstr "Авто-перевірка: Розташування матеріалу" # AI Translated msgid "Cutting Module Offset Calibration" msgstr "Калібрування зміщення різального модуля" msgid "Measuring Surface" msgstr "Вимірювання поверхні" msgid "Calibrating the detection position of nozzle clumping" msgstr "Калібрування позицій виявлення налипання сопла" msgid "Update successful." msgstr "Оновлення успішне." msgid "Downloading failed." msgstr "Завантаження не вдалося." msgid "Verification failed." msgstr "Перевірка не вдалася." msgid "Update failed." msgstr "Не вдалося оновити." msgid "Timelapse is not supported on this printer." msgstr "Таймлапс не підтримується цим принтером." msgid "Timelapse is not supported while the storage does not exist." msgstr "Таймлапс не підтримується за відсутності сховища." msgid "Timelapse is not supported while the storage is unavailable." msgstr "Таймлапс не підтримується поки недоступне сховище." msgid "Timelapse is not supported while the storage is readonly." msgstr "Таймлапс не підтримується поки сховище лише для читання." # AI Translated msgid "To ensure your safety, certain processing tasks (such as laser) can only be resumed on printer." msgstr "Задля вашої безпеки певні операції обробки (наприклад, лазерні) можна відновити лише на принтері." # AI Translated #, c-format, boost-format msgid "The chamber temperature is too high, which may cause the filament to soften. Please wait until the chamber temperature drops below %d℃. You may open the front door or enable fans to cool down." msgstr "Температура камери занадто висока, що може спричинити розмʼякшення філаменту. Зачекайте, доки температура камери не опуститься нижче %d℃. Ви можете відкрити передні дверцята або увімкнути вентилятори для охолодження." # AI Translated #, c-format, boost-format msgid "AMS temperature is too high, which may cause the filament to soften. Please wait until the AMS temperature drops below %d℃." msgstr "Температура AMS занадто висока, що може спричинити розмʼякшення філаменту. Зачекайте, доки температура AMS не опуститься нижче %d℃." # AI Translated msgid "The current chamber temperature or the target chamber temperature exceeds 45℃. In order to avoid extruder clogging, low temperature filament(PLA/PETG/TPU) is not allowed to be loaded." msgstr "Поточна або цільова температура камери перевищує 45℃. Щоб уникнути засмічення екструдера, завантаження низькотемпературних філаментів (PLA/PETG/TPU) заборонено." # AI Translated msgid "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder. In order to avoid extruder clogging, it is not allowed to set the chamber temperature." msgstr "В екструдер завантажено низькотемпературний філамент (PLA/PETG/TPU). Щоб уникнути засмічення екструдера, встановлювати температуру камери заборонено." msgid "When you set the chamber temperature below 40℃, the chamber temperature control will not be activated, and the target chamber temperature will automatically be set to 0℃." msgstr "Якщо ви встановите температуру камери нижче 40℃, контроль температури камери не буде активований, і цільова температура камери автоматично буде встановлена на 0℃." msgid "Failed to start print job" msgstr "Не вдалося запустити завдання друку" msgid "This calibration does not support the currently selected nozzle diameter" msgstr "Калібрування не підтримує обраний діаметр сопла" msgid "Current flowrate cali param is invalid" msgstr "Поточна величина калібрування потоку некоректна" msgid "Selected diameter and machine diameter do not match" msgstr "Обраний діаметр і діаметр профілю принтера не відповідають один одному" msgid "Failed to generate cali G-code" msgstr "Не вдалося згенерувати калібрувальний G-код" msgid "Calibration error" msgstr "Помилка калібрування" # AI Translated msgid "This printer is not configured with the hardware this control needs." msgstr "На цьому принтері не налаштовано обладнання, потрібне для цього елемента керування." # AI Translated msgid "This control is not supported on this printer." msgstr "Цей елемент керування не підтримується на цьому принтері." # AI Translated msgid "Network unavailable" msgstr "Мережа недоступна" msgid "Resume Printing" msgstr "Відновити друк" msgid "Resume (defects acceptable)" msgstr "Продовжити (дефекти прийнятні)" msgid "Resume (problem solved)" msgstr "Продовжити (проблему вирішено)" msgid "Stop Printing" msgstr "Зупинити друк" msgid "Check Assistant" msgstr "Перевірка помічника" msgid "Filament Extruded, Continue" msgstr "Філамент витиснутий, Продовжити" msgid "Not Extruded Yet, Retry" msgstr "Ще не витиснуто філамент, Повторити" msgid "Finished, Continue" msgstr "Завершено, Продовжити" msgid "Filament Loaded, Resume" msgstr "Філамент завантажений, Відновити" msgid "View Liveview" msgstr "Перегляд в реальному часі" msgid "No Reminder Next Time" msgstr "Не нагадувати наступного разу" # AI Translated msgid "Recheck" msgstr "Перевірити знову" msgid "Ignore. Don't Remind Next Time" msgstr "Ігнорувати. Не нагадувати наступного разу" msgid "Ignore this and Resume" msgstr "Ігнорувати це і продовжити" msgid "Problem Solved and Resume" msgstr "Проблему вирішено і продовжити" msgid "Got it, Turn off the Fire Alarm." msgstr "Звісно, вимкнути пожежне сповіщення." msgid "Retry (problem solved)" msgstr "Повторити (проблему вирішено)" msgid "Stop Drying" msgstr "Зупинити сушіння" # AI Translated msgid "Proceed" msgstr "Продовжити" # AI Translated msgid "Abort" msgstr "Перервати" # AI Translated msgid "Disable Purification for This Print" msgstr "Вимкнути очищення повітря для цього друку" # AI Translated msgid "Don't Remind Me" msgstr "Не нагадувати" msgid "Retry" msgstr "Повторити спробу" msgid "Resume" msgstr "Продовжити" msgid "Unknown error." msgstr "Невідома помилка" # AI Translated msgid "Loading ..." msgstr "Завантаження ..." msgid "default" msgstr "типово" #, boost-format msgid "Edit Custom G-code (%1%)" msgstr "Змінити власний G-код (%1%)" msgid "Built-in placeholders (Double click item to add to G-code)" msgstr "Вбудовані заповнювачі (Двічі клацніть елемент, щоб додати до G-коду)" msgid "Search G-code placeholders" msgstr "Пошук G-коду в заповнювачах" msgid "Add selected placeholder to G-code" msgstr "Додати вибраний заповнювач до G-коду" msgid "Select placeholder" msgstr "Вибрати заповнювач" msgid "[Global] Slicing State" msgstr "[Глобальний] Стан нарізки" msgid "Read Only" msgstr "Тільки для читання" msgid "Read Write" msgstr "Читати Писати" msgid "Slicing State" msgstr "Стан зрізу" msgid "Print Statistics" msgstr "Статистика друку" msgid "Objects Info" msgstr "Інформація про обʼєкти" msgid "Dimensions" msgstr "Розміри" msgid "Temperatures" msgstr "Температури" msgid "Timestamps" msgstr "Відмітки часу" #, boost-format msgid "Specific for %1%" msgstr "Специфічно для %1%" msgid "Presets" msgstr "Пресети" msgid "Print settings" msgstr "Параметри друку" msgid "Filament settings" msgstr "Налаштування філаменту" msgid "SLA Materials settings" msgstr "Налаштування матеріалів SLA" msgid "Printer settings" msgstr "Налаштування принтера" msgid "parameter name" msgstr "назва параметра" msgid "layers" msgstr "шари" msgid "Range" msgstr "Діапазон" msgid "Empty string" msgstr "Порожній рядок" msgid "Value is out of range." msgstr "Значення поза допустимим діапазоном." #, c-format, boost-format msgid "%s can’t be a percentage" msgstr "%s не може бути відсотком" #, c-format, boost-format msgid "Value %s is out of range, continue?" msgstr "Значення %s поза допустимим діапазоном, продовжити?" msgid "Parameter validation" msgstr "Перевірка параметрів" #, c-format, boost-format msgid "Value %s is out of range. The valid range is from %d to %d." msgstr "Значення %s знаходиться за межами діапазону. Дійсний діапазон від %d до %d." #, c-format, boost-format msgid "" "Is it %s%% or %s %s?" msgstr "" "Це %s%% або %s %s?" #, boost-format msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\"" msgstr "Недійсний формат введення. Очікується вектор розмірів у наступному форматі: \"%1%\"" msgid "Input value is out of range" msgstr "Вхідне значення виходить за межі діапазону" msgid "Some extension in the input is invalid" msgstr "Якесь з розширень вводу некоректне" msgid "This parameter expects a valid template." msgstr "Цей параметр очікує правильного шаблону." # AI Translated msgid "Invalid pattern. Use N, N#K, or a comma-separated list with optional #K per entry. Examples: 5, 5#2, 1,7,9, 5,9#2,18." msgstr "Некоректний шаблон. Використовуйте N, N#K або список через кому з необовʼязковим #K для кожного запису. Приклади: 5, 5#2, 1,7,9, 5,9#2,18." #, boost-format msgid "Invalid format. Expected vector format: \"%1%\"" msgstr "Невірний формат. Очікуваний векторний формат: \"%1%\"" # AI Translated msgid "System agents" msgstr "Системні агенти" # AI Translated msgid "No plugin selected" msgstr "Плагін не вибрано" # AI Translated msgid "Add plugin" msgstr "Додати плагін" # AI Translated msgid "Select plugin" msgstr "Вибрати плагін" # AI Translated msgid "Remove plugin" msgstr "Вилучити плагін" # AI Translated msgid "Configure" msgstr "Налаштувати" # AI Translated #, c-format, boost-format msgid "Configure (%d)" msgstr "Налаштувати (%d)" msgid "Pick" msgstr "Обрати" msgid "Summary" msgstr "Підсумок" msgid "Layer Height" msgstr "Висота шару" msgid "Line Width" msgstr "Ширина лінії" msgid "Actual Speed" msgstr "Фактична швидкість" msgid "Acceleration" msgstr "Прискорення" msgid "Jerk" msgstr "Jerk" msgid "Fan Speed" msgstr "Швидкість вентилятора" msgid "Flow" msgstr "Потік" msgid "Actual Flow" msgstr "Фактичний потік" msgid "Tool" msgstr "Інструмент" msgid "Layer Time" msgstr "Час Шару" msgid "Layer Time (log)" msgstr "Час шару (журнал)" msgid "Pressure Advance" msgstr "Pressure Advance" # AI Translated msgid "Noop" msgstr "Немає дії" msgid "Retract" msgstr "Втягування" msgid "Unretract" msgstr "Подача" msgid "Seam" msgstr "Шов" msgid "Tool Change" msgstr "Зміна інструменту" msgid "Color Change" msgstr "Зміна Кольору" msgid "Pause Print" msgstr "Призупинити друк" msgid "Travel" msgstr "Переміщення" msgid "Wipe" msgstr "Протирання" msgid "Extrude" msgstr "Екструзія" msgid "Inner wall" msgstr "Внутрішня стінка" msgid "Outer wall" msgstr "Зовнішня стінка" msgid "Overhang wall" msgstr "Нависаюча стінка" msgid "Sparse infill" msgstr "Часткове заповнення" msgid "Internal solid infill" msgstr "Внутрішнє суцільне заповнення" msgid "Top surface" msgstr "Верхня поверхня" msgid "Bridge" msgstr "Міст" msgid "Gap infill" msgstr "Заповнення пропусків" msgid "Skirt" msgstr "Спідниця" msgid "Support interface" msgstr "Інтерфейс підтримки" msgid "Prime tower" msgstr "Підготовча вежа" msgid "Bottom surface" msgstr "Нижня поверхня" msgid "Internal bridge" msgstr "Внутрішній міст" msgid "Support transition" msgstr "Підтримка переходу" # AI Translated msgid "Mixed" msgstr "Змішано" msgid "Height: " msgstr "Висота: " msgid "Width: " msgstr "Ширіна: " msgid "Flow: " msgstr "Потік: " msgid "Fan: " msgstr "Швидкість вентилятора: " msgid "Temperature: " msgstr "Температура: " msgid "Layer Time: " msgstr "Час шару: " msgid "Tool: " msgstr "Засіб: " msgid "Color: " msgstr "Колір: " msgid "Acceleration: " msgstr "Прискорення: " msgid "Jerk: " msgstr "Jerk: " msgid "PA: " msgstr "PA: " msgid "mm/s" msgstr "мм/с" msgid "mm/s²" msgstr "мм/с²" msgid "mm³/s" msgstr "мм³/с" msgid "Flow rate" msgstr "Потік" msgid "Fan speed" msgstr "Швидкість вентилятора" msgid "Time" msgstr "Час" msgid "Speed: " msgstr "Швидкість: " msgid "Actual speed profile" msgstr "Фактичний профіль швидкості" msgid "Statistics of All Plates" msgstr "Статистика всіх пластин" msgid "Display" msgstr "Відображати" msgid "Flushed" msgstr "Промито" msgid "Tower" msgstr "Вежа" msgid "Total" msgstr "Всього" msgid "Total estimation" msgstr "Загальна оцінка" msgid "Total time" msgstr "Загальний час" msgid "Total cost" msgstr "Загальна ціна" # AI Translated msgid "Automatically re-slice according to the optimal filament grouping, and the grouping results will be displayed after slicing." msgstr "Автоматично повторно нарізати відповідно до оптимального групування філаментів; результати групування буде показано після нарізки." msgid "Filament Grouping" msgstr "Групування філаменту" msgid "Why this grouping" msgstr "Чому це згруповано" # AI Translated msgid "Please place filaments on the printer based on grouping result." msgstr "Розмістіть філаменти на принтері відповідно до результату групування." msgid "Tips:" msgstr "Поради:" msgid "Current grouping of slice result is not optimal." msgstr "Поточне групування результату нарізання не оптимальне." # AI Translated #, boost-format msgid "Increase %1%g filament and %2% changes compared to optimal grouping." msgstr "Збільшує витрату філаменту на %1%г та кількість змін на %2% порівняно з оптимальним групуванням." # AI Translated #, boost-format msgid "Increase %1%g filament and save %2% changes compared to optimal grouping." msgstr "Збільшує витрату філаменту на %1%г та економить %2% змін порівняно з оптимальним групуванням." # AI Translated #, boost-format msgid "Save %1%g filament and increase %2% changes compared to optimal grouping." msgstr "Економить %1%г філаменту та збільшує кількість змін на %2% порівняно з оптимальним групуванням." # AI Translated #, boost-format msgid "Save %1%g filament and %2% changes compared to a printer with one nozzle." msgstr "Економить %1%г філаменту та %2% змін порівняно з принтером з одним соплом." # AI Translated #, boost-format msgid "Save %1%g filament and increase %2% changes compared to a printer with one nozzle." msgstr "Економить %1%г філаменту та збільшує кількість змін на %2% порівняно з принтером з одним соплом." # AI Translated #, boost-format msgid "Increase %1%g filament and save %2% changes compared to a printer with one nozzle." msgstr "Збільшує витрату філаменту на %1%г та економить %2% змін порівняно з принтером з одним соплом." msgid "Set to Optimal" msgstr "Встановити до оптимального" msgid "Regroup filament" msgstr "Перегрупувати філамент" msgid "up to" msgstr "аж до" msgid "above" msgstr "вище" msgid "from" msgstr "від" msgid "Usage" msgstr "Використання" msgid "Layer height (mm)" msgstr "Висота Шару (мм)" msgid "Line width (mm)" msgstr "Ширина лінії (мм)" msgid "Speed (mm/s)" msgstr "Швидкість (мм/с)" msgid "Actual Speed (mm/s)" msgstr "Фактична швидкість (мм/с)" msgid "Acceleration (mm/s²)" msgstr "Прискорення (мм/с²)" msgid "Jerk (mm/s)" msgstr "Jerk (mm/s)" msgid "Fan speed (%)" msgstr "Швидкість Вентилятора (%)" msgid "Temperature (℃)" msgstr "Температура (℃)" msgid "Volumetric flow rate (mm³/s)" msgstr "Обʼємна витрата (мм³/с)" msgid "Actual volumetric flow rate (mm³/s)" msgstr "Фактична обʼємна швидкість потоку (мм³/с)" msgid "Seams" msgstr "Шви" msgid "Filament changes" msgstr "Зміни філаменту" msgid "Options" msgstr "Параметри" msgid "Cost" msgstr "Ціна" msgid "Filament change times" msgstr "Час зміни філаменту" msgid "Tool changes" msgstr "Зміна інструменту" msgid "Color change" msgstr "Зміна кольору" msgctxt "Noun" msgid "Print" msgstr "Друк" msgid "Printer" msgstr "Принтер" msgid "Time Estimation" msgstr "Оцінка часу" msgid "Normal mode" msgstr "Нормальний режим" msgid "Total Filament" msgstr "Загальний філамент" msgid "Model Filament" msgstr "Філамент моделі" msgid "Prepare time" msgstr "Час підготовки" msgid "Model printing time" msgstr "Час друку моделі" msgid "Show stealth mode" msgstr "Показати тихий режим" msgid "Show normal mode" msgstr "Показати нормальний режим" # AI Translated msgid "" "An object is placed in the left/right nozzle-only area or exceeds the printable height of the left nozzle.\n" "Please ensure the filaments used by this object are not arranged to other nozzles." msgstr "" "Обʼєкт розміщено в зоні, доступній лише для лівого/правого сопла, або він перевищує друковану висоту лівого сопла.\n" "Переконайтеся, що філаменти, які використовує цей обʼєкт, не призначені іншим соплам." msgid "" "An object is laid over the boundary of plate or exceeds the height limit.\n" "Please solve the problem by moving it totally on or off the plate, and confirming that the height is within the build volume." msgstr "" "Обʼєкт знаходиться за кордоном пластини або перевищує обмеження по висоті.\n" "Будь ласка, вирішіть проблему, перемістивши її повністю на тарілку або з неї,і підтвердження того, що висота знаходиться в межах обсягу збирання." msgid "Variable layer height" msgstr "Змінна висота шару" msgid "Adaptive" msgstr "Адаптивні" msgid "Quality / Speed" msgstr "Якість/Швидкість" # AI Translated msgctxt "Mesh action" msgid "Smooth" msgstr "Згладити" msgid "Radius" msgstr "Радіус" msgid "Keep min" msgstr "Зберегти мінімальну висоту" msgid "Add detail" msgstr "Додати деталі" msgid "Remove detail" msgstr "Вилучити деталі" msgid "Reset to base" msgstr "Скинути на базу" msgid "Smoothing" msgstr "Згладжування" msgid "Increase/decrease edit area" msgstr "Збільшення/зменшення області редагування" msgid "Sequence" msgstr "Послідовність" msgid "Object selection" msgstr "Вибір обʼєкта" msgid "number keys" msgstr "клавіші з числами" msgid "Number keys can quickly change the color of objects" msgstr "Клавіші з числами можуть швидко змінювати колір обʼєктів" msgid "Following objects are laid over the boundary of plate or exceeds the height limit:\n" msgstr "Наступні обʼєкти перекривають межі пластини або перевищують ліміт по висоті:\n" msgid "Please solve the problem by moving it totally on or off the plate, and confirming that the height is within the build volume.\n" msgstr "Будь ласка, передвиньте це повністю на чи з пластини, та переконайтеся, що висота знаходиться у межах області друку.\n" # AI Translated #, c-format, boost-format msgid "The position or size of some models exceeds the %s's printable range." msgstr "Положення або розмір деяких моделей виходить за межі області друку %s." # AI Translated #, c-format, boost-format msgid "The position or size of the model %s exceeds the %s's printable range." msgstr "Положення або розмір моделі %s виходить за межі області друку %s." # AI Translated msgid " Please check and adjust the part's position or size to fit the printable range:\n" msgstr " Перевірте та скоригуйте положення або розмір деталі, щоб вона вмістилася в область друку:\n" #, boost-format msgid "Left nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%\n" msgstr "Ліве сопло: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%\n" #, boost-format msgid "Right nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%" msgstr "Праве сопло: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%" msgid "Tool move" msgstr "Інструмент Переміщення" msgid "Tool Rotate" msgstr "Інструмент обертання" msgid "Move object" msgstr "Перемістити обʼєкт" msgid "Auto orientation options" msgstr "Параметри Автоорієнтації" msgid "Enable rotation" msgstr "Увімкнути обертання" msgid "Optimize support interface area" msgstr "Оптимізація області підтримки" msgid "Orient" msgstr "Орієнтація" msgid "Arrange options" msgstr "Параметри впорядкування" msgid "0 means auto spacing." msgstr "0 означає автоматичний інтервал." msgid "Auto rotate for arrangement" msgstr "Автоматичне обертання при впорядкуванні" msgid "Allow multiple materials on same plate" msgstr "Дозволити використання декількох матеріалів на одній пластині" msgid "Avoid extrusion calibration region" msgstr "Уникайте області калібрування екструзії" msgid "Align to Y axis" msgstr "Розташувати вздовж осі Y" # AI Translated msgctxt "Camera View" msgid "Front" msgstr "Перед" msgctxt "Camera View" msgid "Back" msgstr "Ззаду" # AI Translated #. TRN To be shown in the main menu View->Top msgctxt "Camera View" msgid "Top" msgstr "Верх" # AI Translated #. TRN To be shown in the main menu View->Bottom msgctxt "Camera View" msgid "Bottom" msgstr "Низ" msgctxt "Camera View" msgid "Left" msgstr "Ліво" msgctxt "Camera View" msgid "Right" msgstr "Право" msgid "Add" msgstr "Додати" msgid "Add plate" msgstr "Додати пластину" msgid "Auto orient all/selected objects" msgstr "Автоорієнтація всі/вибрані обʼєкти" msgid "Auto orient all objects on current plate" msgstr "Автоорієнтація всі обʼєкти на поточній пластині" msgid "Arrange all objects" msgstr "Впорядкувати всі обʼєкти" msgid "Arrange objects on selected plates" msgstr "Впорядкувати обʼєкти на вибраних пластинах" msgid "Split to objects" msgstr "Розділити на обʼєкти" msgid "Assembly View" msgstr "Вигляд збирання" msgid "Select Plate" msgstr "Вибрати пластину" msgid "Slicing" msgstr "Нарізка" msgid "Slice all" msgstr "Нарізати все" msgid "Failed" msgstr "Помилка" msgid "All Plates" msgstr "Усі пластини" msgid "Stats" msgstr "Статистика" msgid "Slice" msgstr "Нарізка" msgid "Review" msgstr "Огляд" msgid "Assembly Return" msgstr "Повернення збірки" msgid "Return" msgstr "Повернення" msgid "Canvas Toolbar" msgstr "Панель полотна" msgid "Fit camera to scene or selected object." msgstr "Пристосувати камеру до сцени або вибраного обʼєкта." msgid "3D Navigator" msgstr "3D-навігатор" msgid "Zoom button" msgstr "Кнопка масштабу" msgid "Overhangs" msgstr "Нависання" msgid "Outline" msgstr "Контур" # AI Translated msgid "Wireframe" msgstr "Каркас" msgid "Realistic View" msgstr "Реалістичний вигляд" msgid "Perspective" msgstr "Перспектива" msgid "Axes" msgstr "Осі" msgid "Gridlines" msgstr "Лінії сітки" msgid "Labels" msgstr "Підписи" msgid "Paint Toolbar" msgstr "Панель інструментів малювання" msgid "Explosion Ratio" msgstr "Коефіцієнт вибуху" msgid "Section View" msgstr "Розріз" # AI Translated msgid "Assembly Control" msgstr "Керування складанням" msgid "Selection Mode" msgstr "Режим вибору" msgid "Total Volume:" msgstr "Загальний обсяг:" msgid "Assembly Info" msgstr "Інформація про збирання" msgid "Volume:" msgstr "Обʼєм:" msgid "Size:" msgstr "Розмір:" # AI Translated #, boost-format msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)." msgstr "Виявлено конфлікти шляхів G-коду на шарі %d, Z = %.2lf мм. Будь ласка, рознесіть конфліктуючі обʼєкти далі один від одного (%s <-> %s)." msgid "An object is laid over the plate boundaries." msgstr "Обʼєкт виходить за межі пластини." msgid "A G-code path goes beyond the max print height." msgstr "Шлях G-коду виходить за максимально допустиму висоту друку." msgid "A G-code path goes beyond plate boundaries." msgstr "Шлях G-коду виходить за межі пластини." msgid "Not support printing 2 or more TPU filaments." msgstr "Не підтримується друк 2 або більше TPU філаментів." #, c-format, boost-format msgid "Tool %d" msgstr "Інструмент %d" # AI Translated #, c-format, boost-format msgid "Filament %s is placed in the %s, but the generated G-code path exceeds the printable range of the %s." msgstr "Філамент %s розміщено в %s, але згенерований шлях G-коду виходить за межі області друку %s." # AI Translated #, c-format, boost-format msgid "Filaments %s are placed in the %s, but the generated G-code path exceeds the printable range of the %s." msgstr "Філаменти %s розміщено в %s, але згенерований шлях G-коду виходить за межі області друку %s." # AI Translated #, c-format, boost-format msgid "Filament %s is placed in the %s, but the generated G-code path exceeds the printable height of the %s." msgstr "Філамент %s розміщено в %s, але згенерований шлях G-коду перевищує друковану висоту %s." # AI Translated #, c-format, boost-format msgid "Filaments %s are placed in the %s, but the generated G-code path exceeds the printable height of the %s." msgstr "Філаменти %s розміщено в %s, але згенерований шлях G-коду перевищує друковану висоту %s." msgid "Open wiki for more information." msgstr "Відкрити вікі для детальнішої інформації." msgid "Only the object being edited is visible." msgstr "Відображається лише редагований обʼєкт." #, c-format, boost-format msgid "Filaments %s cannot be printed directly on the surface of this plate." msgstr "Філаменти %s не можуть бути надруковані безпосередньо на поверхні пластини." # AI Translated msgid "PLA and PETG filaments detected in the mixture. Adjust parameters according to the Wiki to ensure print quality." msgstr "У суміші виявлено філаменти PLA та PETG. Скоригуйте параметри згідно з Wiki, щоб забезпечити якість друку." msgid "The prime tower extends beyond the plate boundary." msgstr "Підготовча вежа виходить за межі пластини." # AI Translated msgid "Partial flushing volume set to 0. Multi-color printing may cause color mixing in models. Please readjust flushing settings." msgstr "Обʼєм часткової промивки встановлено на 0. Багатоколірний друк може спричинити змішування кольорів у моделях. Скоригуйте налаштування промивки." msgid "Click Wiki for help." msgstr "Клацніть Вікі для довідки." msgid "Click here to regroup" msgstr "Клацніть тут, щоб перегрупувати" # AI Translated msgid "Flushing Volume" msgstr "Обʼєм промивки" msgid "Calibration step selection" msgstr "Вибір кроку калібрування" msgid "Micro lidar calibration" msgstr "Калібрування мікролідара" msgid "Bed leveling" msgstr "Вирівнювання столу" msgid "High-temperature Heatbed Calibration" msgstr "Високотемпературне калібрування гарячого ліжка" # AI Translated msgid "Nozzle clumping detection Calibration" msgstr "Калібрування виявлення налипання на сопло" msgid "Calibration program" msgstr "Програма калібрування" msgid "" "The calibration program detects the status of your device automatically to minimize deviation.\n" "It keeps the device performing optimally." msgstr "" "Програма калібрування автоматично визначає стан вашого пристрою,щоб\n" "звести до мінімуму відхилення.\n" "Це забезпечує оптимальну роботу пристрою." msgid "Calibration Flow" msgstr "Калібрувальний потік" msgid "Start Calibration" msgstr "Почати калібрування" msgid "Completed" msgstr "Завершений" msgid "Calibrating" msgstr "Калібрування" msgid "No step selected" msgstr "Не вибрано крок" msgid "Auto-record Monitoring" msgstr "Автозапис Моніторингу" msgid "Go Live" msgstr "У прямому ефірі" msgid "Liveview Retry" msgstr "Повторити перегляд у реальному часі" msgid "Resolution" msgstr "Роздільна здатність" msgid "Enable" msgstr "Увімкнути" msgid "Hostname or IP" msgstr "Назва хоста або IP-адреса" msgid "Custom camera source" msgstr "Власне джерело камери" msgid "Show \"Live Video\" guide page." msgstr "Показати \\Пряме відео\\ сторінку посібника." msgid "Connect Printer (LAN)" msgstr "Підключити принтер (локальна мережа)" msgid "Please input the printer access code:" msgstr "Введіть код доступу до принтера:" # AI Translated msgid "" "You can find it in \"Settings > Network > Access code\"\n" "on the printer, as shown in the figure:" msgstr "" "Ви можете знайти його в \"Налаштування > Мережа > Код доступу\"\n" "на принтері, як показано на малюнку:" # AI Translated msgid "" "You can find it in \"Setting > Setting > LAN only > Access Code\"\n" "on the printer, as shown in the figure:" msgstr "" "Ви можете знайти його в \"Налаштування > Налаштування > Лише LAN > Код доступу\"\n" "на принтері, як показано на малюнку:" msgid "Invalid input" msgstr "Помилка введення." msgid "New Window" msgstr "Нове вікно" msgid "Open a new window" msgstr "Відкрити нове вікно" msgid "Closing application" msgstr "Додаток закривається" msgid "Closing Application while some presets are modified." msgstr "Закриття програми під чвс зміни деяких налаштувань." msgid "Logging" msgstr "Ведення журналу" msgid "Prepare" msgstr "Підготовка" msgid "Preview" msgstr "Перегляд" msgid "Device" msgstr "Пристрій" msgid "Multi-device" msgstr "Багато пристроїв" msgid "Project" msgstr "Проєкт" # AI Translated msgid "Device (Web)" msgstr "Пристрій (Веб)" msgid "Yes" msgstr "Так" msgid "No" msgstr "Ні" msgid "will be closed before creating a new model. Do you want to continue?" msgstr "буде закрито перед створенням нової моделі. Ви хочете продовжити?" msgid "Slice plate" msgstr "Нарізати пластину" msgid "Print plate" msgstr "Друкувати пластину" msgid "Export G-code file" msgstr "Експорт файлу G-коду" msgctxt "Verb" msgid "Print" msgstr "Друк" msgid "Export plate sliced file" msgstr "Експортувати файл нарізки пластини" msgid "Send" msgstr "Надіслати" msgid "Export all sliced file" msgstr "Експортувати файл нарізки всього" msgid "Print all" msgstr "Друкувати все" msgid "Send all" msgstr "Надіслати все" msgid "Send to Multi-device" msgstr "Відправити на багато пристроїв" msgid "Keyboard Shortcuts" msgstr "Гарячі клавіші" msgid "Show the list of keyboard shortcuts" msgstr "Показати список гарячих клавіш" msgid "Setup Wizard" msgstr "Майстер налаштувань" msgid "Show Configuration Folder" msgstr "Показати папку конфігурації" msgid "Troubleshoot Center" msgstr "Центр вирішення проблем" msgid "Open Network Test" msgstr "Відкритий мережевий тест" msgid "Show Tip of the Day" msgstr "Показати пораду дня" msgid "Check for Updates" msgstr "Перевірка оновлень" #, c-format, boost-format msgid "&About %s" msgstr "&Про %s" msgid "Upload Models" msgstr "Вивантажити моделі" msgid "Download Models" msgstr "Завантажити моделі" msgid "Default View" msgstr "Типовий вигляд" msgid "Top View" msgstr "Вигляд зверху" msgid "Bottom View" msgstr "Вигляд знизу" msgid "Front View" msgstr "Вигляд спереду" # AI Translated msgctxt "Camera View" msgid "Rear" msgstr "Ззаду" msgid "Rear View" msgstr "Вигляд ззаду" msgid "Left View" msgstr "Вигляд зліва" msgid "Right View" msgstr "Вигляд справа" msgid "Start a new window" msgstr "Відкрити нове вікно" msgid "New Project" msgstr "Новий проєкт" msgid "Start a new project" msgstr "Почати новий проєкт" msgid "Open a project file" msgstr "Відкрити файл проєкту" msgid "Recent files" msgstr "Останні файли" msgid "Save Project" msgstr "Зберегти проєкт" msgid "Save current project to file" msgstr "Зберегти поточний проєкт у файл" msgid "Save Project as" msgstr "Зберегти проєкт як" msgid "Save current project as" msgstr "Зберегти поточний проєкт як" msgid "Publish 3MF" msgstr "" msgid "Export a 3MF file with the selected settings embedded" msgstr "" msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF" msgstr "Імпорт 3MF/STL/STEP/SVG/OBJ/AMF" msgid "Load a model" msgstr "Завантажте модель" msgid "Import ZIP Archive" msgstr "Імпорт Zip-архіву" msgid "Load models contained within a ZIP archive" msgstr "Завантажити моделі, що містяться в zip-архіві" msgid "Import Configs" msgstr "Імпорт конфігурацій" msgid "Load configs" msgstr "Завантажити конфігурацію" msgid "Import" msgstr "Імпорт" msgid "Export all objects as one STL" msgstr "Експортувати всі об’єкти як один файл STL" msgid "Export all objects as STLs" msgstr "Експортувати всі об’єкти як файли STL" msgid "Export all objects as one DRC" msgstr "Експортувати всі обʼєкти як один DRC" msgid "Export all objects as DRCs" msgstr "Експортувати всі обʼєкти як декілька DRC" msgid "Export Generic 3MF" msgstr "Експорт загального 3MF" msgid "Export 3MF file without using some 3mf-extensions" msgstr "Експорт файлу 3MF без використання будь-яких 3mf-розширень." msgid "Export current sliced file" msgstr "Експорт поточного нарізаного файлу" msgid "Export all plate sliced file" msgstr "Експортувати файл нарізки всіх пластин" msgid "Export G-code" msgstr "Експорт G-коду" msgid "Export current plate as G-code" msgstr "Експортувати поточну пластину як G-код" msgid "Export toolpaths as OBJ" msgstr "Експортувати траєкторії як OBJ" msgid "Export Preset Bundle" msgstr "Експорт пакету профілів" msgid "Export current configuration to files" msgstr "Експорт поточної конфігурації до файлів" msgid "Export" msgstr "Експорт" msgid "Quit" msgstr "Вихід" msgid "Undo" msgstr "Скасувати" msgid "Redo" msgstr "Повторити" msgid "Cut" msgstr "Вирізати" msgid "Cut selection to clipboard" msgstr "Вирізати виділення в буфер обміну" msgid "Copy" msgstr "Копіювати" msgid "Copy selection to clipboard" msgstr "Копіювати виділення в буфер обміну" msgid "Paste" msgstr "Вставити" msgid "Paste clipboard" msgstr "Вставити буфер обміну" msgid "Delete Selected" msgstr "Видалити вибране" msgid "Deletes the current selection" msgstr "Видаляє поточний вибір" msgid "Deletes all objects" msgstr "Видаляє всі обʼєкти" msgid "Clone Selected" msgstr "Клонувати вибране" msgid "Clone copies of selections" msgstr "Клонувати копії вибраних обʼєктів" msgid "Duplicate Current Plate" msgstr "Дублювати поточну пластину" msgid "Duplicate the current plate" msgstr "Дублювати поточну пластину" msgid "Selects all objects" msgstr "Вибрати всі обʼєкти" msgid "Deselects all objects" msgstr "Зняти виділення з усіх обʼєктів" msgid "Use Perspective View" msgstr "Використовувати вид у перспективі" msgid "Use Orthogonal View" msgstr "Використовувати ортогональний вид" msgid "Auto Perspective" msgstr "Авто-перспектива" msgid "Automatically switch between orthographic and perspective when changing from top/bottom/side views." msgstr "Автоматично перемикати між ортографією і перспективою під час зміни вигляду верх/низ/боки." msgid "Show &G-code Window" msgstr "Показати вікно G-коду" msgid "Show G-code window in Preview scene." msgstr "Показати вікно G-коду у сцені попереднього перегляду" msgid "Show 3D Navigator" msgstr "Показати 3D-навігатор" msgid "Show 3D navigator in Prepare and Preview scene." msgstr "Показати 3D-навігатор у сцені підготовки та попереднього перегляду" msgid "Show Gridlines" msgstr "Показати лінії сітки" msgid "Show Gridlines on plate" msgstr "Показати лінії сітки на пластині" msgid "Reset Window Layout" msgstr "Скинути розташування вікон" msgid "Reset to default window layout" msgstr "Скинути до типового вигляду вікна" msgid "Show &Labels" msgstr "Показати &підписи" msgid "Show object labels in 3D scene." msgstr "Показати підписи обʼєктів на 3D-сцені" msgid "Show &Overhang" msgstr "Показати &Виступ" msgid "Show object overhang highlight in 3D scene." msgstr "Показати підсвічування виступу обʼєкта у 3D сцені" msgid "Show Selected Outline (beta)" msgstr "Показати контур виділеного (бета)" msgid "Show outline around selected object in 3D scene." msgstr "Показувати контур навколо виділеного обʼєкта у 3D сцені" msgid "Preferences" msgstr "Налаштування" # AI Translated msgctxt "Menu" msgid "Edit" msgstr "Редагування" msgid "View" msgstr "Вигляд" msgid "Preset Bundle" msgstr "Набір пресетів" msgid "Sync Presets" msgstr "Синхронізувати пресети" msgid "Pull and apply the latest presets from OrcaCloud" msgstr "Завантажте і застосуйте останні пресети з OrcaCloud" msgid "You must be logged in to sync presets from cloud." msgstr "Вам потрібно ввійти в синхронізацію пресетів з хмари." msgid "Syncing presets from cloud…" msgstr "Синхронізація пресетів з хмари…" msgid "Help" msgstr "Допомога" msgid "Temperature Calibration" msgstr "Калібрування температури" msgid "Max flowrate" msgstr "Максимальний потік" msgid "Pressure advance" msgstr "Випередження тиску (PA)" msgid "Flow ratio" msgstr "Коефіцієнт потоку" msgid "Flow Rate Calibration" msgstr "Калібрування потоку" msgid "Retraction" msgstr "Втягування" msgid "Cornering" msgstr "Повороти" msgid "Cornering calibration" msgstr "Калібрування поворотів" # AI Translated msgid "Input Shaping Frequency" msgstr "Частота Input Shaping" # AI Translated msgid "Input Shaping Damping/zeta factor" msgstr "Коефіцієнт демпфування/дзета Input Shaping" msgid "Input Shaping" msgstr "Input Shaping" msgid "VFA" msgstr "Вертикальні дрібні артефакти (VFA)" msgid "Calibration Guide" msgstr "Підручник з калібрування" msgid "&Open G-code" msgstr "&Відкрити G-код" msgid "Open a G-code file" msgstr "Відкрийте файл G-коду" msgid "Re&load from Disk" msgstr "Перезавантажити з диска" msgid "Reload the plater from disk" msgstr "Перезавантажити пластину з диска" msgid "Export &Toolpaths as OBJ" msgstr "Експорт траєкторій як OBJ" msgid "Open &Slicer" msgstr "Відкрити &студію" msgid "Open Slicer" msgstr "Відкрита студія" msgid "&Quit" msgstr "&Вихід" #, c-format, boost-format msgid "Quit %s" msgstr "Вийти %s" msgid "&File" msgstr "&Файл" msgid "&View" msgstr "&Вигляд" msgid "&Help" msgstr "&Допомога" #, c-format, boost-format msgid "A file exists with the same name: %s. Do you want to overwrite it?" msgstr "Файл з такою назвою вже існує: %s, хочете перезаписати його?" #, c-format, boost-format msgid "A config exists with the same name: %s. Do you want to overwrite it?" msgstr "Існує конфігурація з таким ж назвою: %s, хочете її перезаписати?" msgid "Overwrite file" msgstr "Перезаписати файл" msgid "Overwrite config" msgstr "Перезаписати конфігурацію" msgid "Yes to All" msgstr "Так для всіх" msgid "No to All" msgstr "Ні для всіх" msgid "Choose a directory" msgstr "Виберіть каталог" # AI Translated #, c-format, boost-format msgid "There is %d config exported. (Only non-system configs)" msgid_plural "There are %d configs exported. (Only non-system configs)" msgstr[0] "Експортовано %d конфігурацію. (Тільки несистемні конфігурації)" msgstr[1] "Експортовано %d конфігурації. (Тільки несистемні конфігурації)" msgstr[2] "Експортовано %d конфігурацій. (Тільки несистемні конфігурації)" msgstr[3] "Експортовано %d конфігурації. (Тільки несистемні конфігурації)" msgid "Export Result" msgstr "Експорт результату" msgid "Select profile to load:" msgstr "Виберіть профіль для завантаження:" msgid "Config files (*.json;*.zip;*.orca_printer;*.orca_bundle;*.orca_filament)|*.json;*.zip;*.orca_printer;*.orca_bundle;*.orca_filament" msgstr "Файли конфігурацій (*.json;*.zip;*.orca_printer;*.orca_bundle;*.orca_filament)|*.json;*.zip;*.orca_printer;*.orca_bundle;*.orca_filament" # AI Translated #, c-format, boost-format msgid "There is %d config imported. (Only non-system and compatible configs)" msgid_plural "There are %d configs imported. (Only non-system and compatible configs)" msgstr[0] "Імпортовано %d конфігурацію. (Тільки несистемні та сумісні конфігурації)" msgstr[1] "Імпортовано %d конфігурації. (Тільки несистемні та сумісні конфігурації)" msgstr[2] "Імпортовано %d конфігурацій. (Тільки несистемні та сумісні конфігурації)" msgstr[3] "Імпортовано %d конфігурації. (Тільки несистемні та сумісні конфігурації)" msgid "" "\n" "Hint: Make sure you have added the corresponding printer before importing the configs." msgstr "" "\n" "Підказка: Перед імпортом конфігурацій переконайтеся, що ви додали відповідний принтер." msgid "Import result" msgstr "Імпортувати результат" msgid "File is missing" msgstr "Файл відсутній" msgid "The project is no longer available." msgstr "Проект недоступний." msgid "" "Do you want to synchronize your personal data from Orca Cloud?\n" "It contains the following information:\n" "1. The Process presets\n" "2. The Filament presets\n" "3. The Printer presets" msgstr "" "Бажаєте синхронізувати свої персональні дані з Orca Cloud?\n" "Вони містять наступну інформацію:\n" "1. Пресети процесу\n" "2. Пресети філаменту\n" "3. Пресети принтера" msgid "Synchronization" msgstr "Синхронізація" msgid "The device cannot handle more conversations. Please retry later." msgstr "Пристрій не може обробляти більше розмов. Будь ласка, спробуйте пізніше." msgid "Player is malfunctioning. Please reinstall the system player." msgstr "Програвач несправний. Будь ласка, перевстановіть систему програвача." msgid "The player is not loaded; please click the \"play\" button to retry." msgstr "Програвач не завантажений, будь ласка, натисніть кнопку “Відтворити”, щоб спробувати ще раз." msgid "The player is not loaded because the GStreamer GTK video sink is missing or failed to initialize." msgstr "Програвач не завантажено, тому що відтворювач відео GStreamer GTK відсутній або не вдалося запустити." msgid "Please confirm if the printer is connected." msgstr "Будь ласка, підтвердіть, чи принтер підключений." msgid "The printer is currently busy downloading. Please try again after it finishes." msgstr "Принтер зараз зайнятий завантаженням. Будь ласка, спробуйте ще раз після завершення завантаження." msgid "Printer camera is malfunctioning." msgstr "Камера принтера несправна." msgid "A problem occurred. Please update the printer firmware and try again." msgstr "Виникла проблема. Будь ласка, оновіть прошивку принтера і спробуйте знову." msgid "LAN Only Liveview is off. Please turn on the liveview on printer screen." msgstr "Режим прямого підключення до мережі вимкнений. Будь ласка, увімкніть режим прямого перегляду на екрані принтера." msgid "Please enter the IP of the printer to connect." msgstr "Будь ласка, введіть IP-адресу принтера для підключення." msgid "Initializing..." msgstr "Ініціалізація..." msgid "Connection Failed. Please check the network and try again" msgstr "Підключення не вдалося. Будь ласка, перевірте мережу та спробуйте ще раз" msgid "Please check the network and try again. You can restart or update the printer if the issue persists." msgstr "Будь ласка, перевірте мережу та спробуйте ще раз. Якщо проблема продовжується, ви можете перезавантажити або оновити принтер." msgid "The printer has been logged out and cannot connect." msgstr "Принтер був вийшов із системи та не може підключитися." msgid "Video Stopped." msgstr "Відео зупинено." msgid "LAN Connection Failed (Failed to start liveview)" msgstr "Помилка підключення до локальної мережі (не вдалося запустити перегляд у реальному часі)" msgid "" "Virtual Camera Tools is required for this task!\n" "Do you want to install them?" msgstr "" "Для цього завдання потрібні інструменти віртуальної камери!\n" "\n" "Ви хочете встановити їх?" msgid "Downloading Virtual Camera Tools" msgstr "Завантаження інструментів віртуальної камери" msgid "" "Another virtual camera is running.\n" "Orca Slicer supports only a single virtual camera.\n" "Do you want to stop this virtual camera?" msgstr "" "Працює інша віртуальна камера.\n" "Orca Slicer підтримує лише одну віртуальну камеру.\n" "Ви хочете зупинити цю віртуальну камеру?" #, c-format, boost-format msgid "Virtual camera initialize failed (%s)!" msgstr "Помилка ініціалізації віртуальної камери (%s)!" msgid "Network unreachable" msgstr "Мережа недоступна" msgid "Information" msgstr "Інформація" msgid "Playing..." msgstr "Гра..." msgid "Loading..." msgstr "Завантаження..." msgid "Year" msgstr "Рік" msgid "Month" msgstr "Місяць" msgid "All Files" msgstr "Всі файли" msgid "Group files by year, recent first." msgstr "Згрупуйте файли за роками, спочатку нещодавні." msgid "Group files by month, recent first." msgstr "Згрупуйте файли по місяцях, спочатку нещодавні." msgid "Show all files, recent first." msgstr "Показати всі файли спочатку останні." msgid "Timelapse" msgstr "Таймлапс" msgid "Switch to timelapse files." msgstr "Перехід до файлів таймлапсу." msgid "Video" msgstr "Відео" msgid "Switch to video files." msgstr "Перехід до відеофайлів." msgid "Switch to 3MF model files." msgstr "Переключитися на файли моделей 3MF." msgid "Delete selected files from printer." msgstr "Видалити вибрані файли з принтера." msgid "Download" msgstr "Завантажити" msgid "Download selected files from printer." msgstr "Завантажте вибрані файли з принтера." msgid "Batch manage files." msgstr "Пакетне керування файлами." msgid "Reload file list from printer." msgstr "Перезавантажте список файлів з принтера." msgid "No printers." msgstr "Ніяких принтерів." msgid "Loading file list..." msgstr "Завантаження списку файлів..." msgid "No files" msgstr "Немає файлів" msgid "Load failed" msgstr "Не вдалося завантажити" msgid "Browsing file in storage is not supported in current firmware. Please update the printer firmware." msgstr "Огляд файлу в сховищі не підтримується поточною прошивкою. Будь ласка, оновіть прошивку принтера." msgid "LAN Connection Failed (Failed to view sdcard)" msgstr "Помилка підключення LAN (Не вдалося переглянути sd-карту)" msgid "Browsing file in storage is not supported in LAN Only Mode." msgstr "Огляд файлів у сховищі не підтримується в режимі Лише LAN." # AI Translated #, c-format, boost-format msgid "You are going to delete %u file from printer. Are you sure to continue?" msgid_plural "You are going to delete %u files from printer. Are you sure to continue?" msgstr[0] "Ви збираєтеся видалити %u файл із принтера. Ви впевнені, що хочете це зробити?" msgstr[1] "Ви збираєтеся видалити %u файл із принтера. Ви впевнені, що хочете це зробити?" msgstr[2] "Ви збираєтеся видалити %u файлів із принтера. Ви впевнені, що хочете це зробити?" msgstr[3] "Ви збираєтеся видалити %u файла із принтера. Ви впевнені, що хочете це зробити?" msgid "Delete files" msgstr "Видалити файли" #, c-format, boost-format msgid "Do you want to delete the file '%s' from printer?" msgstr "Ви хочете видалити файл '%s' з принтера?" msgid "Delete file" msgstr "Видалити файл" msgid "Fetching model information..." msgstr "Отримання інформації про модель ..." msgid "Failed to fetch model information from printer." msgstr "Не вдалося отримати інформацію про модель з принтера." msgid "Failed to parse model information." msgstr "Не вдалося розібрати інформацію про модель." msgid "The .gcode.3mf file contains no G-code data. Please slice it with Orca Slicer and export a new .gcode.3mf file." msgstr "Файл .gcode.3mf не містить даних G-коду. Будь ласка, розріжте його за допомогою Orca Slicer і експортуйте новий файл .gcode.3mf." #, c-format, boost-format msgid "File '%s' was lost! Please download it again." msgstr "Файл '%s' втрачений! Завантажте його знову." #, c-format, boost-format msgid "" "File: %s\n" "Title: %s\n" msgstr "" "Файл: %s\n" "Заголовок: %s\n" msgid "Download waiting..." msgstr "Очікування завантаження..." msgid "Play" msgstr "Відтворити" msgid "Open Folder" msgstr "Відкрити папку" msgid "Download finished" msgstr "Завантаження завершено" #, c-format, boost-format msgid "Downloading %d%%..." msgstr "Завантаження %d%%..." msgid "Air Condition" msgstr "Кондиціонування" msgid "Reconnecting the printer, the operation cannot be completed immediately, please try again later." msgstr "Перепідключення принтера. Операцію не можна завершити негайно, спробуйте ще раз пізніше." msgid "Timeout, please try again." msgstr "Час вийшов, спробуйте ще раз." msgid "File does not exist." msgstr "Файл не існує." msgid "File checksum error. Please retry." msgstr "Помилка контрольної суми файлу. Будь ласка, спробуйте ще раз." msgid "Not supported on the current printer version." msgstr "Не підтримується на поточній версії принтера." msgid "" "Please check if the storage is inserted into the printer.\n" "If it still cannot be read, you can try formatting the storage." msgstr "" "Будь ласка, перевірте чи сховище вставлене в принтер.\n" "Якщо його все ще не вдається прочитати, спробуйте відформатувати його." msgid "The firmware version of the printer is too low. Please update the firmware and try again." msgstr "Версія прошивки принтера занизька. Будь ласка, оновіть прошивку і спробуйте ще раз." msgid "The file already exists, do you want to replace it?" msgstr "Файл вже існує, бажаєте замінити його?" msgid "Insufficient storage space, please clear the space and try again." msgstr "Недостатньо місця в сховищі, будь ласка, очистіть місце і спробуйте ще раз." msgid "File creation failed, please try again." msgstr "Не вдалося створити файл, спробуйте ще раз." msgid "File write failed, please try again." msgstr "Не вдалося записати файл, спробуйте ще раз." msgid "MD5 verification failed, please try again." msgstr "Не вдалося перевірити MD5, спробуйте ще раз." msgid "File renaming failed, please try again." msgstr "Не вдалося перейменувати файл, спробуйте ще раз." msgid "File upload failed, please try again." msgstr "Не вдалося вивантажити файл, спробуйте ще раз." #, c-format, boost-format msgid "Error code: %d" msgstr "Код помилки: %d" msgid "User cancels task." msgstr "Користувач скасував завдання." msgid "Failed to read file, please try again." msgstr "Не вдалося прочитати файл, спробуйте ще раз." msgid "Speed:" msgstr "Швидкість:" msgid "Deadzone:" msgstr "Мертва зона:" msgid "Options:" msgstr "Параметри:" msgid "Zoom" msgstr "Збільшити" msgid "Translation/Zoom" msgstr "Переклад/Збільшення" msgid "3Dconnexion settings" msgstr "Налаштування 3D-зʼєднання" msgid "Swap Y/Z axes" msgstr "Змінити місцями осі Y/Z" msgid "Invert X axis" msgstr "Інвертувати вісь X" msgid "Invert Y axis" msgstr "Інвертувати вісь Y" msgid "Invert Z axis" msgstr "Інвертувати вісь Z" msgid "Invert Yaw axis" msgstr "Інвертувати вісь повороту" msgid "Invert Pitch axis" msgstr "Інвертувати вісь нахилу" msgid "Invert Roll axis" msgstr "Інвертувати вісь Roll" msgid "(LAN)" msgstr "(LAN)" msgid "Search" msgstr "Пошук" msgid "My Device" msgstr "Мій пристрій" msgid "Other Device" msgstr "Інші пристрої" msgid "Online" msgstr "У мережі" msgid "Input access code" msgstr "Введіть код доступу" msgid "Can't find devices?" msgstr "Не можу знайти пристрої?" msgid "Log out successful." msgstr "Вийти успішно." msgid "Offline" msgstr "Не в мережі" msgid "Busy" msgstr "Зайнятий" msgid "Modifying the device name" msgstr "Зміна імені пристрою" msgid "Name is invalid;" msgstr "Некоректна назва;" msgid "illegal characters:" msgstr "неприпустимі символи:" msgid "illegal suffix:" msgstr "неприпустимий суфікс:" msgid "The name field is not allowed to be empty." msgstr "Назва не може бути порожньою." msgid "The name is not allowed to start with a space." msgstr "Назва не може починатися з пробілу." msgid "The name is not allowed to end with a space." msgstr "Назва не може закінчуватися пробілом." msgid "The name is not allowed to exceed 32 characters." msgstr "Назва не повинна перевищувати 32 знаки." msgid "Bind with Pin Code" msgstr "Прив’язати через Пін-код" msgid "Bind with Access Code" msgstr "Прив’язати через Код досту" msgctxt "Quit_Switching" msgid "Quit" msgstr "Вихід" msgid "Switching..." msgstr "Перемикання..." msgid "Switching failed" msgstr "Не вдалося перемкнути" msgid "Printing progress" msgstr "Хід друку" msgid "Parts Skip" msgstr "Пропуск частин" msgid "Stop" msgstr "Стоп" msgid "Layer: N/A" msgstr "Шар: немає даних" msgid "Click to view thermal preconditioning explanation" msgstr "Клацніть, щоб переглянути пояснення термічного попереднього кондиціонування" msgid "Clear" msgstr "Очищення" msgid "" "You have completed printing the mall model, \n" "but synchronizing rating information has failed." msgstr "" "Ви завершили друк моделі торгового центру, \n" "але синхронізація інформації про рейтинг не вдалася." msgid "How do you like this printing file?" msgstr "Як вам подобається цей файл для друку?" msgid "(The model has already been rated. Your rating will overwrite the previous rating.)" msgstr "(Модель вже була оцінена. Ваша оцінка перезапише попередню оцінку.)" msgid "Rate" msgstr "Оцінити" msgid "Camera" msgstr "Камера" msgid "Storage" msgstr "Сховище" msgid "Camera Setting" msgstr "Налаштування камери" msgid "Switch Camera View" msgstr "Переключити вид камери" msgid "Control" msgstr "Контроль" msgid "Printer Parts" msgstr "Частини принтера" msgid "Print Options" msgstr "Параметри друку" msgid "Safety Options" msgstr "Параметри безпеки" msgid "Hotends" msgstr "Хотенди" msgid "Lamp" msgstr "Лампа" msgid "Bed" msgstr "Стіл" msgid "Debug Info" msgstr "Налагоджувальна інформація" msgid "Filament loading..." msgstr "Завантаження філаменту..." msgid "No Storage" msgstr "Немає сховища" msgid "Storage Abnormal" msgstr "Сховище проблемне" msgid "Cancel print" msgstr "Скасувати друк" msgid "Are you sure you want to stop this print?" msgstr "Ви дійсно хочете зупинити друк?" msgid "The printer is busy with another print job." msgstr "Принтер зайнятий іншим завданням друку." msgid "When printing is paused, filament loading and unloading are only supported for external slots." msgstr "Коли принтер призупинено, завантаження і відвантаження філаменту підтримується лише для зовнішних слотів." msgid "Current extruder is busy changing filament." msgstr "Поточний екструдер зайнятий зміною філаменту." # AI Translated msgid "\"Load\" or \"Unload\" is not supported for external spool while using Filament Track Switch." msgstr "«Завантажити» або «Вивантажити» не підтримується для зовнішньої котушки під час використання Filament Track Switch." # AI Translated msgid "The Filament Track Switch has not been setup. Please setup on printer." msgstr "Filament Track Switch не налаштовано. Налаштуйте його на принтері." msgid "Current slot has already been loaded." msgstr "Поточний слот вже завантажений." msgid "The selected slot is empty." msgstr "Вибраний слот порожній." msgid "Printer 2D mode does not support 3D calibration" msgstr "2D-режим принтера не підтримує 3D-калібрування" msgid "Downloading..." msgstr "Завантаження..." msgid "Cloud Slicing..." msgstr "Поділ хмари..." #, c-format, boost-format msgid "In Cloud Slicing Queue, there are %s tasks ahead of you." msgstr "У черзі Cloud Slicing Queue попереду %s завдань." #, c-format, boost-format msgid "Layer: %s" msgstr "Шар: %s" #, c-format, boost-format msgid "Layer: %d/%d" msgstr "Шар: %d/%d" # AI Translated msgid "Please heat the nozzle to above 170℃ before loading or unloading filament." msgstr "Будь ласка, нагрійте сопло вище 170℃ перед завантаженням або вивантаженням філаменту." msgid "Chamber temperature cannot be changed in cooling mode while printing." msgstr "Температуру камери не можливо змінити в режимі охолодження під час друку." msgid "If the chamber temperature exceeds 40℃, the system will automatically switch to heating mode. Please confirm whether to switch." msgstr "Якщо температура в камері перевищує 40℃, система автоматично перемикається в режим обігріву. Будь ласка, підтвердіть коли перемикати." msgid "Please select an AMS slot before calibration" msgstr "Будь ласка, виберіть слот AMS перед калібруванням" # AI Translated msgid "Cannot read filament info: the filament is loaded to the tool head. Please unload the filament and try again." msgstr "Неможливо прочитати інформацію про філамент: філамент завантажено в головку інструмента. Будь ласка, вивантажте філамент і повторіть спробу." msgid "This only takes effect during printing" msgstr "Це діє лише під час друку" msgid "Silent" msgstr "Тихий" msgid "Sport" msgstr "Спортивний" msgid "Ludicrous" msgstr "Безглуздий" # AI Translated msgid "Turning off the lights during the task will cause the failure of AI monitoring, like spaghetti detection. Please choose carefully." msgstr "Вимкнення підсвітки під час завдання призведе до збою AI-моніторингу, зокрема виявлення «спагеті». Обирайте обережно." msgid "Keep it On" msgstr "Лишати ввімкненим" msgid "Turn it Off" msgstr "Вимкнути" msgid "Can't start this without storage." msgstr "Не можливо запустити без сховища." msgid "Rate the Print Profile" msgstr "Оцінити профіль друку" msgid "Comment" msgstr "Коментувати" msgid "Rate this print" msgstr "Оцініть цей друк" msgid "Add Photo" msgstr "Додати фото" msgid "Delete Photo" msgstr "Видалити фото" msgid "Select Images" msgstr "Вибрати зображення" msgid "Image files (*.png;*.jpg;*jpeg)|*.png;*.jpg;*.jpeg" msgstr "Файли зображень (*.png;*.jpg;*jpeg)|*.png;*.jpg;*.jpeg" msgid "Submit" msgstr "Підтвердити" msgid "Please click on the star first." msgstr "Будь ласка, спочатку клацніть на зірку." msgid "Get oss config failed." msgstr "Не вдалося отримати конфігурацію OSS." msgid "Upload Pictures" msgstr "Завантажити фотографії" msgid "Number of images successfully uploaded" msgstr "Кількість успішно завантажених зображень" msgid " upload failed" msgstr " Помилка завантаження" msgid " upload config prase failed\n" msgstr " Помилка при спробі завантажити конфігураційний файл\n" msgid " No corresponding storage bucket\n" msgstr " Відсутній відповідний сховищний контейнер\n" msgid " cannot be opened\n" msgstr " Не може бути відкрито\n" msgid "" "The following issues occurred during the process of uploading images. Do you want to ignore them?\n" "\n" msgstr "" "Під час процесу завантаження зображень виникли наступні проблеми. Бажаєте їх проігнорувати?\n" "\n" msgid "info" msgstr "інфо" msgid "Synchronizing the printing results. Please retry a few seconds later." msgstr "Синхронізація результатів друку. Будь ласка, повторіть спробу через кілька секунд." msgid "Upload failed\n" msgstr "Помилка завантаження\n" msgid "Obtaining instance_id failed\n" msgstr "помилка отримання instance_id\n" msgid "" "Your comment result cannot be uploaded due to the following reasons:\n" "\n" " error code: " msgstr "" "Ваш коментар не може бути завантажений з якихось причин. Ось деталі помилки:\n" "\n" " код помилки: " msgid "error message: " msgstr "текст помилки: " msgid "" "\n" "\n" "Would you like to redirect to the webpage to give a rating?" msgstr "" "\n" "\n" "Чи бажаєте ви перейти на веб-сторінку для оцінки?" msgid "Some of your images failed to upload. Would you like to redirect to the webpage to give a rating?" msgstr "Деякі з ваших зображень не вдалося завантажити. Бажаєте перейти на веб-сторінку для оцінки?" msgid "You can select up to 16 images." msgstr "Ви можете вибрати до 16 зображень." msgid "" "At least one successful print record of this print profile is required \n" "to give a positive rating (4 or 5 stars)." msgstr "" "Для того щоб поставити позитивний рейтинг (4 або 5 зірок), потрібно \n" "мати принаймні один успішний запис про друк з цим профілем друку." msgid "click to add machine" msgstr "клацніть, щоб додати машину" msgid "Status" msgstr "Статус" msgctxt "Firmware" msgid "Update" msgstr "Оновлення" msgid "Assistant(HMS)" msgstr "Асистент(HMS)" #, c-format, boost-format msgid "Network plug-in v%s" msgstr "Мережевий плагін версії %s" #, c-format, boost-format msgid "Network plug-in v%s (%s)" msgstr "Мережевий плагін версії %s (%s)" msgid "Don't show again" msgstr "Більше не показувати" msgid "Go to" msgstr "Перейти до" msgid "Later" msgstr "Пізніше" #, c-format, boost-format msgid "%s error" msgstr "%s помилка" #, c-format, boost-format msgid "%s has encountered an error" msgstr "%s виявив помилку" #, c-format, boost-format msgid "%s warning" msgstr "%s попередження" #, c-format, boost-format msgid "%s has a warning" msgstr "%s має попередження" #, c-format, boost-format msgid "%s info" msgstr "%s інфо" #, c-format, boost-format msgid "%s information" msgstr "%s інформація" msgid "Skip" msgstr "Пропустити" msgid "Newer 3MF version" msgstr "Нова версія 3mf" msgid "The 3MF file version is in Beta and it is newer than the current OrcaSlicer version." msgstr "Версія 3mf-файлу знаходиться в стадії бета-тестування і є новішою за поточну версію OrcaSlicer." msgid "If you would like to try Orca Slicer Beta, you may click to" msgstr "Якщо ви хочете спробувати бета-версію Orca Slicer, ви можете натиснути на" msgid "Download Beta Version" msgstr "Завантажити бета-версію" msgid "The 3MF file version is newer than the current OrcaSlicer version." msgstr "Версія файлу 3MF новіша, ніж поточна версія Orca Slicer." msgid "Updating your OrcaSlicer could enable all functionality in the 3MF file." msgstr "Оновлення вашого Orca Slicer може увімкнути всю функціональність у файлі 3MF." msgid "Current Version: " msgstr "Поточна версія: " msgid "Latest Version: " msgstr "Остання версія: " msgctxt "Software" msgid "Update" msgstr "Оновлення" msgid "Not for now" msgstr "Наразі не потрібно" msgid "Server Exception" msgstr "Помилка сервера" msgid "The server is unable to respond. Please click the link below to check the server status." msgstr "Сервер не може відповісти. Будь ласка, натисніть на посилання нижче, щоб перевірити стан сервера." msgid "If the server is in a fault state, you can temporarily use offline printing or local network printing." msgstr "Якщо сервер перебуває в стані збою, ви можете тимчасово використовувати офлайн-друк або друк через локальну мережу." msgid "How to use LAN only mode" msgstr "Як використовувати режим лише локальної мережі" msgid "Don't show this dialog again" msgstr "Більше не показувати це діалогове вікно" msgid "Please refer to Wiki before use->" msgstr "Зверніться до Вікі перед використанням->" msgid "3D Mouse disconnected." msgstr "3D-миша відʼєднана." # AI Translated msgid "A new configuration is available. Update now?" msgstr "Доступна нова конфігурація. Оновити зараз?" msgid "Integration was successful." msgstr "Інтеграція пройшла успішно." msgid "Integration failed." msgstr "Інтеграція не вдалася." msgid "Undo integration was successful." msgstr "Скасувати інтеграцію вдалося." msgid "New network plug-in available." msgstr "Доступний новий мережевий плагін." msgid "Details" msgstr "Подробиці" msgid "New printer config available." msgstr "Доступна нова конфігурація принтера." msgid "Undo integration failed." msgstr "Скасувати інтеграцію не вдалося." msgid "Exporting" msgstr "Експорт." msgid "An update is available!" msgstr "Програмне забезпечення має нову версію." msgid "Go to download page" msgstr "Перейти до сторінки завантаження." msgid "Open Folder." msgstr "Відкрити теку." msgid "Safely remove hardware." msgstr "Безпечне видалення пристрою." # AI Translated #, c-format, boost-format msgid "%1$d Object has custom supports." msgid_plural "%1$d Objects have custom supports." msgstr[0] "%1$d обʼєкт має опори користувача." msgstr[1] "%1$d обʼєкти мають опори користувача." msgstr[2] "%1$d обʼєктів мають опори користувача." msgstr[3] "%1$d обʼєкта має опори користувача." # AI Translated #, c-format, boost-format msgid "%1$d Object has color painting." msgid_plural "%1$d Objects have color painting." msgstr[0] "%1$d обʼєкт має фарбування." msgstr[1] "%1$d обʼєкти мають фарбування." msgstr[2] "%1$d обʼєктів мають фарбування." msgstr[3] "%1$d обʼєкта має фарбування." # AI Translated #, c-format, boost-format msgid "%1$d object was loaded as a part of cut object." msgid_plural "%1$d objects were loaded as parts of cut object." msgstr[0] "%1$d завантажено як частину обрізаного обʼєкта." msgstr[1] "%1$d завантажено як частини обрізаних обʼєктів" msgstr[2] "%1$d завантажено як частини обрізаних обʼєктів" msgstr[3] "%1$d завантажено як частини обрізаних обʼєктів" # AI Translated #, c-format, boost-format msgid "%1$d object was loaded with fuzzy skin painting." msgid_plural "%1$d objects were loaded with fuzzy skin painting." msgstr[0] "%1$d обʼєкт завантажено з намальованою шорсткою поверхнею." msgstr[1] "%1$d обʼєкти завантажено з намальованою шорсткою поверхнею." msgstr[2] "%1$d обʼєктів завантажено з намальованою шорсткою поверхнею." msgstr[3] "%1$d обʼєкта завантажено з намальованою шорсткою поверхнею." msgid "ERROR" msgstr "ПОМИЛКА" msgid "COMPLETED" msgstr "ВИКОНАНО" msgid "CANCELED" msgstr "Скасовано" msgid "Cancel upload" msgstr "Скасувати завантаження" msgid "Jump to" msgstr "Перейти до" msgid "Error:" msgstr "Помилка:" msgid "Warning:" msgstr "Попередження:" msgid "Exported successfully" msgstr "Експорт успішно." msgid "Model file downloaded." msgstr "Завантажений файл моделі." msgid "Pull" msgstr "Завантажити" # AI Translated msgid "Force push" msgstr "Примусово надіслати" msgid "Shared profiles may be available for this printer." msgstr "Спільні профілі можуть бути доступними для цього принтера." msgid "Browse shared profiles" msgstr "Оглянути спільні профілі" msgid "Serious warning:" msgstr "Серйозне попередження:" msgid " (Repair)" msgstr " (Ремонт)" msgid " Click here to install it." msgstr " Клацніть тут, щоб встановити його." msgid "WARNING:" msgstr "ПОПЕРЕДЖЕННЯ:" msgid "Your model needs support! Please enable support material." msgstr "Вашій моделі потрібна підтримка! Увімкніть допоміжний матеріал." msgid "G-code path overlap" msgstr "Перекриття шляху G-code" msgid "Cut connectors" msgstr "Вирізати зʼєднання" msgid "Layers" msgstr "Шари" # AI Translated msgid "The application cannot run normally because OpenGL version is lower than 3.2.\n" msgstr "Застосунок не може працювати належним чином, оскільки версія OpenGL нижча за 3.2.\n" msgid "Please upgrade your graphics card driver." msgstr "Будь ласка, оновіть драйвер відеокарти." msgid "Unsupported OpenGL version" msgstr "Непідтримувана версія OpenGL" #, c-format, boost-format msgid "" "Unable to load shaders:\n" "%s" msgstr "" "Не вдалося завантажити шейдери:\n" "%s" msgid "Error loading shaders" msgstr "Помилка завантаження шейдерів" msgctxt "Layers" msgid "Top" msgstr "Верх" msgctxt "Layers" msgid "Bottom" msgstr "Низ" # AI Translated msgid "Plugin Selection" msgstr "Вибір плагіна" # AI Translated msgid "" "No plugins capabilities available for this type.\n" "Enable or install some to use." msgstr "" "Для цього типу немає доступних можливостей плагінів.\n" "Увімкніть або встановіть їх, щоб скористатися ними." # AI Translated msgid "There is stringing-prone filament in the current print job. Enabling nozzle clumping detection now may degrade print quality. Are you sure you want to enable it?" msgstr "У поточному завданні друку є філамент, схильний до утворення павутиння. Увімкнення виявлення налипання на сопло зараз може погіршити якість друку. Ви впевнені, що хочете його увімкнути?" # AI Translated msgid "Enable Nozzle Clumping Detection" msgstr "Увімкнути виявлення налипання на сопло" # AI Translated msgid "When enabled, the printer will automatically capture photos of printed parts and upload them to the cloud. Would you like to enable this option?" msgstr "Якщо увімкнено, принтер автоматично робитиме фотографії надрукованих деталей і завантажуватиме їх у хмару. Бажаєте увімкнути цю опцію?" # AI Translated msgid "Confirm Enable Print Status Snapshot" msgstr "Підтвердьте увімкнення знімків стану друку" msgid "Enable detection of build plate position" msgstr "Увімкнути визначення положення робочої пластини" msgid "The localization tag of the build plate will be detected, and printing will be paused if the tag is not in predefined range." msgstr "Виявлено тег локалізації робочої пластини, і друк припиняється, якщо тег не знаходиться в певному діапазоні." msgid "Build Plate Detection" msgstr "Виявлення робочої пластини" # AI Translated msgid "Identifies the type and position of the build plate on the heatbed. Pausing printing if a mismatch is detected." msgstr "Визначає тип і положення робочої пластини на столі. Друк призупиняється, якщо виявлено невідповідність." # AI Translated msgid "Purifies the chamber air as the print finishes, based on the selected mode." msgstr "Очищує повітря камери після завершення друку відповідно до вибраного режиму." # AI Translated msgid "Purifies the chamber air through internal circulation as each print finishes." msgstr "Очищує повітря камери через внутрішню циркуляцію після завершення кожного друку." # AI Translated msgid "Automatically match the corresponding switch strategy for leak-prone filaments (disable blob detection) and regular filaments (enable blob detection)." msgstr "Автоматично підбирає відповідну стратегію перемикання для схильних до витікання філаментів (вимкнення виявлення напливів) і для звичайних філаментів (увімкнення виявлення напливів)." # AI Translated msgid "Detect whether the nozzle is wrapped by filament or other foreign matter." msgstr "Виявляє, чи не обгорнуте сопло філаментом або іншими сторонніми матеріалами." # AI Translated msgid "After disabling, nozzle wrapping cannot be detected, which may lead to print failure or nozzle damage." msgstr "Після вимкнення обгортання сопла не виявлятиметься, що може призвести до збою друку або пошкодження сопла." msgid "AI Detections" msgstr "Виявлення ШІ" # AI Translated msgid "Printer will send assistant message or pause printing if any of the following problem is detected." msgstr "Принтер надішле повідомлення помічника або призупинить друк, якщо буде виявлено будь-яку з наведених нижче проблем." msgid "Enable AI monitoring of printing" msgstr "Увімкнути ШІ-моніторинг друку" msgid "Pausing Sensitivity:" msgstr "Чутливість до призупинення:" msgid "Spaghetti Detection" msgstr "Виявлення спагеті" # AI Translated msgid "Detect spaghetti failures (scattered lose filament)." msgstr "Виявляти збої типу «спагеті» (розкидані вільні нитки філаменту)." # AI Translated msgid "Purge Chute Pile-Up Detection" msgstr "Виявлення накопичення у жолобі відходів" # AI Translated msgid "Monitor if the waste is piled up in the purge chute." msgstr "Стежити за накопиченням відходів у жолобі очищення." msgid "Nozzle Clumping Detection" msgstr "Виявлення згортання сопла" # AI Translated msgid "Check if the nozzle is clumping by filaments or other foreign objects." msgstr "Перевіряти, чи не налипає на сопло філамент або інші сторонні предмети." # AI Translated msgid "Detects air printing caused by nozzle clogging or filament grinding." msgstr "Виявляє друк у повітря, спричинений засміченням сопла або проковзуванням філаменту." msgid "First Layer Inspection" msgstr "Перевірка першого шару" msgid "Auto-recover from step loss" msgstr "Автоматичне відновлення після втрати кроку" # AI Translated msgid "Store Sent Files on External Storage" msgstr "Зберігати надіслані файли на зовнішньому сховищі" # AI Translated msgid "Save the printing files sent from the slicer and other apps on External Storage" msgstr "Зберігати файли друку, надіслані зі слайсера та інших застосунків, на зовнішньому сховищі" msgid "Allow Prompt Sound" msgstr "Дозволити звук підказки" msgid "Filament Tangle Detection" msgstr "Виявлення заплутування філаменту" msgid "Check if the nozzle is clumping by filament or other foreign objects." msgstr "Перевірте, чи сопло не затверділо від філаменту або інших чужорідних предметів." # AI Translated msgid "Purify Air at Print End" msgstr "Очищати повітря після завершення друку" # AI Translated msgid "Internal Circulation" msgstr "Внутрішня циркуляція" # AI Translated msgid "Alignment Detection" msgstr "Виявлення вирівнювання" # AI Translated msgid "Pauses printing when build plate misalignment is detected." msgstr "Призупиняє друк, коли виявлено зміщення робочої пластини." # AI Translated msgid "Foreign Object Detection" msgstr "Виявлення сторонніх предметів" # AI Translated msgid "Checks for any objects on the build plate at the start of a print to avoid collisions." msgstr "Перевіряє наявність будь-яких предметів на столі на початку друку, щоб уникнути зіткнень." # AI Translated msgid "Printed Part Displacement Detection" msgstr "Виявлення зміщення надрукованої деталі" # AI Translated msgid "Monitors the printed part during printing and alerts immediately if it shifts or collapses." msgstr "Стежить за надрукованою деталлю під час друку та негайно сповіщає, якщо вона зміщується або руйнується." # AI Translated msgid "Checks if the nozzle is clumping by filament or other foreign objects." msgstr "Перевіряє, чи не налипає на сопло філамент або інші сторонні предмети." msgid "On" msgstr "Увімк." msgid "Open Door Detection" msgstr "Виявлення відкритих дверей" msgid "Notification" msgstr "Сповіщення" msgid "Pause printing" msgstr "Призупинити друк" # AI Translated msgid "Print Status Snapshot" msgstr "Знімок стану друку" # AI Translated msgid "Automatically capture and upload print photos, showing defects during printing and the final result for remote viewing." msgstr "Автоматично робити та завантажувати фотографії друку, показуючи дефекти під час друку та кінцевий результат для віддаленого перегляду." msgctxt "Nozzle Type" msgid "Type" msgstr "Тип" msgctxt "Nozzle Diameter" msgid "Diameter" msgstr "Діаметр" msgctxt "Nozzle Flow" msgid "Flow" msgstr "Потік" msgid "Please change the nozzle settings on the printer." msgstr "Будь ласка, змініть налаштування сопла на принтері." msgid "Brass" msgstr "Латунь" msgid "High flow" msgstr "Високий потік" # AI Translated msgid "TPU High flow" msgstr "TPU високий потік" msgid "No wiki link available for this printer." msgstr "Нема доступної вікі-сторінки для цього принтера." # AI Translated msgid "Unavailable while heating maintenance function is on." msgstr "Недоступно, поки увімкнено функцію підтримання нагріву." # AI Translated msgid "Idle Heating Protection" msgstr "Захист від нагріву в режимі очікування" # AI Translated msgid "Stops heating automatically after 5 mins of idle to ensure safety." msgstr "Автоматично припиняє нагрівання після 5 хв простою задля безпеки." msgid "Global" msgstr "Глобальні" msgid "Objects" msgstr "Обʼєкти" msgid "Cycle settings visibility" msgstr "Перемикати видимість налаштувань" msgid "Compare presets" msgstr "Порівняти профілі" msgid "View all object's settings" msgstr "Переглянути всі налаштування обʼєкта" msgid "Material settings" msgstr "Налаштування матеріалу" msgid "Remove current plate (if not last one)" msgstr "Вилучити поточну пластину (якщо вона не остання)" msgid "Auto orient objects on current plate" msgstr "Автоматичне орієнтування обʼєктів на поточній пластині" msgid "Arrange objects on current plate" msgstr "Впорядкувати обʼєкти на поточній пластині" msgid "Unlock current plate" msgstr "Розблокувати поточну пластину" msgid "Lock current plate" msgstr "Блокувати поточну пластину" msgid "Filament grouping" msgstr "Групування філаменту" msgid "Edit current plate name" msgstr "Змінити назву поточної пластини" msgid "Move plate to the front" msgstr "Перемістити пластину на перед" msgid "Customize current plate" msgstr "Пристосувати поточну пластину" #, c-format, boost-format msgid "The %s nozzle can not print %s." msgstr "Сопло %s не може друкувати %s." # AI Translated msgid "Printing mixed-color filament on a single-extruder printer requires frequent filament changes and flushing, which may significantly increase waste and the risk of nozzle / waste-chute clogging." msgstr "Друк філаменту змішаного кольору на принтері з одним екструдером потребує частої зміни філаменту та промивок, що може суттєво збільшити кількість відходів і ризик засмічення сопла або жолоба для відходів." #, boost-format msgid "Mixing %1% with %2% in printing is not recommended.\n" msgstr "Змішування %1% з %2% в друці не рекомендується.\n" msgid " nozzle" msgstr " сопло" #, boost-format msgid "It is not recommended to print the following filament(s) with %1%: %2%\n" msgstr "Не рекомендується друкувати наступні філаменти з %1%: %2%\n" # AI Translated msgid "It is not recommended to use the following nozzle and filament combinations:\n" msgstr "Не рекомендується використовувати такі поєднання сопла та філаменту:\n" #, boost-format msgid "%1% with %2%\n" msgstr "%1% з %2%\n" #, boost-format msgid " plate %1%:" msgstr " пластина %1%:" msgid "Invalid name, the following characters are not allowed:" msgstr "Неприпустима назва, такі символи не дозволені:" msgid "Sliced Info" msgstr "Інформація про нарізання" msgid "Used Filament (m)" msgstr "Використання філаменту (м)" msgid "Used Filament (mm³)" msgstr "Використання філаменту (мм³)" msgid "Used Filament (g)" msgstr "Використання філаменту (g)" msgid "Used Materials" msgstr "Використовувані матеріали" msgid "Estimated time" msgstr "Розрахунковий час" msgid "Set the number of AMS installed on the nozzle." msgstr "Вказати кількість встановлених AMS на сопло." msgid "AMS(4 slots)" msgstr "AMS(4 слоти)" msgid "AMS(1 slot)" msgstr "AMS(1 слот)" msgid "Not installed" msgstr "Не встановлено" # AI Translated msgid "The software does not support using different diameter of nozzles for one print. If the left and right nozzles are inconsistent, we can only proceed with single-head printing. Please confirm which nozzle you would like to use for this project." msgstr "Програма не підтримує використання сопел різного діаметра в одному друці. Якщо ліве та праве сопла відрізняються, ми можемо продовжити лише друк однією головкою. Підтвердьте, яке сопло ви хочете використати для цього проєкту." msgid "Switch diameter" msgstr "Змінити діаметр" msgid "Configuration incompatible" msgstr "Несумісність конфігурації" # AI Translated msgid "Filament switcher detected. All AMS filaments are now available for both extruders. The slicer will auto-assign for optimal printing." msgstr "Виявлено перемикач філаменту. Усі філаменти AMS тепер доступні для обох екструдерів. Слайсер автоматично призначить їх для оптимального друку." # AI Translated msgid "A filament switcher is detected but not calibrated and thus currently unavailable. Please calibrate it on the printer and synchronize before use." msgstr "Виявлено перемикач філаменту, але його не відкалібровано, тому він наразі недоступний. Відкалібруйте його на принтері та синхронізуйте перед використанням." msgid "Tips" msgstr "Поради" msgid "Sync printer information" msgstr "Синхронізувати інформацію принтера" # AI Translated msgid "" "The currently selected machine preset is inconsistent with the connected printer type.\n" "Are you sure to continue syncing?" msgstr "" "Поточно вибраний пресет принтера не відповідає типу підключеного принтера.\n" "Ви впевнені, що хочете продовжити синхронізацію?" # AI Translated msgid "There are unset nozzle types. Please set the nozzle types of all extruders before synchronizing." msgstr "Є невстановлені типи сопел. Установіть типи сопел для всіх екструдерів перед синхронізацією." msgid "Sync extruder infomation" msgstr "Синхронізувати інформацію про еструдер" msgid "Connection" msgstr "Звʼязок" msgid "Synchronize nozzle information and the number of AMS" msgstr "Синхронізувати інформацію про сопла та кількість AMS" msgid "Click to edit preset" msgstr "Натисніть, щоб редагувати профіль" msgid "Nozzle" msgstr "Сопло" msgid "Project Filaments" msgstr "Філаменти проєкта" msgid "Purge mode" msgstr "Режим очищення" msgid "Flushing volumes" msgstr "Обʼєми промивки" msgid "Add one filament" msgstr "Додайте один філамент" msgid "Remove last filament" msgstr "Вилучити останній філамент" msgid "Synchronize filament list from AMS" msgstr "Синхронізувати список ниток з AMS" msgid "Set filaments to use" msgstr "Встановити філаменти для використання" # AI Translated msgid "Add Mixed Filament" msgstr "Додати змішаний філамент" # AI Translated msgid "Mixed Filament" msgstr "Змішаний філамент" # AI Translated msgid "Remove last mixed filament" msgstr "Вилучити останній змішаний філамент" # AI Translated msgid "Add mixed filament" msgstr "Додати змішаний філамент" # AI Translated msgid "Mixed filament has invalid or mismatched components. Please re-edit affected entries." msgstr "У змішаного філаменту недійсні або невідповідні компоненти. Будь ласка, відредагуйте відповідні записи ще раз." msgid "Search plate, object and part." msgstr "Пошук пластини, об’єкта і деталі." msgid "Pellets" msgstr "Гранули" # AI Translated msgid "Mixed filament has broken component references" msgstr "У змішаного філаменту пошкоджені посилання на компоненти" # AI Translated msgid "Edit / Delete / Merge" msgstr "Редагувати / Видалити / Обʼєднати" # AI Translated msgid "The target mixed filament uses this physical filament as a component. Merging will remove this physical filament and may invalidate the mixed filament. Continue?" msgstr "Цільовий змішаний філамент використовує цей фізичний філамент як компонент. Обʼєднання вилучить цей фізичний філамент і може зробити змішаний філамент недійсним. Продовжити?" # AI Translated #, c-format, boost-format msgid "After completing your operation, %s project will be closed and create a new project." msgstr "Після завершення операції проєкт %s буде закрито та створено новий проєкт." msgid "There are no compatible filaments, and sync is not performed." msgstr "Немає сумісних філаментів, а синхронізація не виконується." msgid "Sync filaments with AMS" msgstr "Синхронізація ниток з AMS" # AI Translated msgid "" "There are some unknown or incompatible filaments mapped to generic preset.\n" "Please update Orca Slicer or restart Orca Slicer to check if there is an update to system presets." msgstr "" "Деякі невідомі або несумісні філаменти зіставлено із загальним пресетом.\n" "Оновіть Orca Slicer або перезапустіть його, щоб перевірити наявність оновлень системних пресетів." # AI Translated msgid "Only filament color information has been synchronized from printer." msgstr "З принтера синхронізовано лише інформацію про колір філаменту." msgid "Filament type and color information have been synchronized, but slot information is not included." msgstr "Тип та колір філамента було синхронізовано, але немає інформації про слот." #, boost-format msgid "Do you want to save changes to \"%1%\"?" msgstr "Ви хочете зберегти зміни в \\%1%\\?" #, c-format, boost-format msgid "Successfully unmounted. The device %s (%s) can now be safely removed from the computer." msgstr "Успішно змонтовано. Тепер пристрій %s(%s) можна безпечно видалити з компʼютер." #, c-format, boost-format msgid "Ejecting of device %s (%s) has failed." msgstr "Не вдалося витягнути пристрій %s (%s)." # AI Translated msgid "Previously unsaved items have been detected. Do you want to restore them?" msgstr "Виявлено раніше незбережені елементи. Бажаєте відновити їх?" msgid "Restore" msgstr "Відновити" # AI Translated msgid "The current heatbed temperature is relatively high. The nozzle may clog when printing this filament in a closed environment. Please open the front door and/or remove the upper glass." msgstr "Поточна температура столу відносно висока. При друку цим філаментом у закритому середовищі може статися засмічення сопла. Будь ласка, відкрийте передню дверцю та/або зніміть верхнє скло." # AI Translated msgid "The nozzle hardness required by the filament is higher than the default nozzle hardness of the printer. Please replace the hardened nozzle or filament, otherwise, the nozzle will be worn down or damaged." msgstr "Твердість сопла, необхідна для цього філаменту, вища за типову твердість сопла принтера. Будь ласка, замініть сопло на загартоване або змініть філамент, інакше сопло буде зношене або пошкоджене." msgid "Enabling traditional timelapse photography may cause surface imperfections. It is recommended to change to smooth mode." msgstr "Включення традиційної фотографії таймлапсу може призвести до дефектів на поверхні. Рекомендується перейти в режим згладжування." # AI Translated msgid "Smooth mode for timelapse is enabled, but the prime tower is off, which may cause print defects. Please enable the prime tower, re-slice and print again." msgstr "Увімкнено плавний режим таймлапсу, але підготовчу вежу вимкнено, що може спричинити дефекти друку. Увімкніть підготовчу вежу, повторно наріжте та надрукуйте ще раз." msgid "Expand sidebar" msgstr "Розгорнути бічну панель" msgid "Collapse sidebar" msgstr "Згорнути бічну панель" msgid "Tab" msgstr "Табуляції" #, c-format, boost-format msgid "Loading file: %s" msgstr "Завантаження файлу: %s" msgid "Load 3MF" msgstr "Завантажити 3MF" msgid "BambuStudio Project" msgstr "Проєкт BambuStudio" # AI Translated msgid "The 3MF is not supported by OrcaSlicer, loading geometry data only." msgstr "Цей 3MF не підтримується OrcaSlicer, завантажуються лише дані геометрії." # AI Translated msgid "The 3MF file was generated by an old OrcaSlicer version, loading geometry data only." msgstr "Файл 3MF було створено старою версією OrcaSlicer, завантажуються лише геометричні дані." # AI Translated msgid "The 3MF file was generated by an older version, loading geometry data only." msgstr "Файл 3MF було створено старішою версією, завантажуються лише геометричні дані." # AI Translated msgid "The 3MF file was generated by BambuStudio, loading geometry data only." msgstr "Файл 3MF було створено в BambuStudio, завантажуються лише геометричні дані." # AI Translated msgid "This project was created with an OrcaSlicer 2.3.1-alpha and uses infill rotation template settings that may not work properly with your current infill pattern. This could result in weak support or print quality issues." msgstr "Цей проєкт було створено в OrcaSlicer 2.3.1-alpha, і він використовує налаштування шаблону обертання заповнення, які можуть некоректно працювати з вашим поточним шаблоном заповнення. Це може призвести до слабкої підтримки або проблем з якістю друку." # AI Translated msgid "Would you like OrcaSlicer to automatically fix this by clearing the rotation template settings?" msgstr "Бажаєте, щоб OrcaSlicer автоматично виправив це, очистивши налаштування шаблону обертання?" # AI Translated #, c-format, boost-format msgid "The 3MF file version %s is newer than %s's version %s, found the following unrecognized keys:" msgstr "Версія файлу 3MF %s новіша, ніж версія %s %s, знайдено такі нерозпізнані ключі:" msgid "You should update your software.\n" msgstr "Вам краще оновити програмне забезпечення.\n" # AI Translated #, c-format, boost-format msgid "The 3MF file version %s is newer than %s's version %s, we suggest to upgrade your software." msgstr "Версія файлу 3MF %s новіша, ніж версія %s %s, радимо оновити програмне забезпечення." # AI Translated #, c-format, boost-format msgid "The 3MF was created by BambuStudio (version %s), which is newer than the compatible version %s. Found unrecognized settings:" msgstr "Файл 3MF створено в BambuStudio (версія %s), новішій за сумісну версію %s. Знайдено нерозпізнані налаштування:" # AI Translated #, c-format, boost-format msgid "The 3MF was created by BambuStudio (version %s), which is newer than the compatible version %s. Some settings may not be fully compatible." msgstr "Файл 3MF створено в BambuStudio (версія %s), новішій за сумісну версію %s. Деякі налаштування можуть бути не повністю сумісними." # AI Translated msgid "The 3MF was created by BambuStudio. Some settings may differ from OrcaSlicer." msgstr "Файл 3MF створено в BambuStudio. Деякі налаштування можуть відрізнятися від OrcaSlicer." msgid "Invalid values found in the 3MF:" msgstr "У 3MF знайдено неприпустимі значення:" msgid "Please correct them in the Param tabs" msgstr "Будь ласка, виправте їх у вкладках параметрів" msgid "The 3MF has the following modified G-code in filament or printer presets:" msgstr "У файлі 3MF знаходяться наступні змінені G-коди в пресетах філаменту або принтера:" msgid "Please confirm that all modified G-code is safe to prevent any damage to the machine!" msgstr "Будь ласка, підтвердьте, що ці змінені G-коди безпечні і не призведуть до пошкодження пристрою!" msgid "Modified G-code" msgstr "Змінені G-коди" msgid "The 3MF has the following customized filament or printer presets:" msgstr "У файлі 3MF містяться наступні налаштовані параметри філаменту або принтера:" msgid "Please confirm that the G-code within these presets is safe to prevent any damage to the machine!" msgstr "Будь ласка, підтвердьте, що G-коди в цих налаштованих параметрах безпечні і не призведуть до пошкодження пристрою!" msgid "Customized Preset" msgstr "Пристосований пресет" msgid "Some published settings could not be applied:" msgstr "" msgid "Some filament slots were changed:" msgstr "" # AI Translated msgid "Component name(s) inside step file not in UTF-8 format!" msgstr "Назви компонентів усередині файлу STEP не у форматі UTF-8!" msgid "Because of unsupported text encoding, garbage characters may appear!" msgstr "Через непідтримуване кодування тексту можуть зʼявлятися непотрібні символи!" msgid "Remember my choice." msgstr "Запамʼятати мій вибір." #, boost-format msgid "Failed loading file \"%1%\". An invalid configuration was found." msgstr "Не вдалося завантажити файл \\%1%\\. Виявлено неприпустиму конфігурацію." msgid "Objects with zero volume removed" msgstr "Обʼєкти з нульовим обʼємом видалені" msgid "The volume of the object is zero" msgstr "Обʼєм обʼєкта дорівнює нулю" #, c-format, boost-format msgid "" "The object from file %s is too small, and may be in meters or inches.\n" "Do you want to scale to millimeters?" msgstr "" "Обʼєкт із файлу %s занадто малий, можливо, в метрах або дюймах.\n" "Ви хочете масштабувати до міліметрів?" msgid "Object too small" msgstr "Обʼєкт занадто малий" # AI Translated msgid "" "This file contains several objects positioned at multiple heights.\n" "Instead of considering them as multiple objects, should \n" "the file be loaded as a single object with multiple parts?" msgstr "" "Цей файл містить декілька обʼєктів, розташованих на різних висотах.\n" "Замість того, щоб розглядати їх як кілька обʼєктів, чи слід \n" "завантажити файл як єдиний обʼєкт, що складається з кількох частин?" msgid "Multi-part object detected" msgstr "Виявлено обʼєкт, що складається з кількох частин" # AI Translated msgid "Matching textures to filaments" msgstr "Зіставлення текстур із філаментами" # AI Translated msgid "Texture Import Warning" msgstr "Попередження під час імпорту текстури" msgid "Load these files as a single object with multiple parts?\n" msgstr "Завантажити ці файли як єдиний обʼєкт з кількома частинами?\n" msgid "An object with multiple parts was detected" msgstr "Виявлено обʼєкт, що складається з кількох частин" msgid "Auto-Drop" msgstr "Авто-кидання" # AI Translated #, c-format, boost-format msgid "Connected printer is %s. It must match the project preset for printing.\n" msgstr "Підключений принтер — %s. Для друку він має відповідати пресету проєкту.\n" # AI Translated msgid "Do you want to sync the printer information and automatically switch the preset?" msgstr "Бажаєте синхронізувати інформацію про принтер і автоматично перемкнути пресет?" msgid "The file does not contain any geometry data." msgstr "Файл не містить геометричних даних." msgid "Your object appears to be too large, do you want to scale it down to fit the print bed automatically?" msgstr "" "Ваш обʼєкт здається занадто великим. Ви хочете зменшити його, щоб він відповідав розміру?\n" "підігрів столу автоматично?" msgid "Object too large" msgstr "Обʼєкт занадто великий" msgid "Export STL file:" msgstr "Експорт файлу STL:" msgid "Export Draco file:" msgstr "Експорт файлу Draco:" msgid "Export AMF file:" msgstr "Експор файлу AMF:" msgid "Save file as" msgstr "Зберегти файл як:" msgid "Export OBJ file:" msgstr "Експор файлу OBJ:" #, c-format, boost-format msgid "" "The file %s already exists.\n" "Do you want to replace it?" msgstr "" "Файл %s вже існує.\n" "Бажаєте замінити його?" msgid "Confirm Save As" msgstr "Підтвердити збереження як" msgid "Delete object which is a part of cut object" msgstr "Видалити обʼєкт, який є частиною обрізаного обʼєкта" # AI Translated msgid "" "You are trying to delete an object which is a part of a cut object.\n" "This action will break a cut correspondence.\n" "After that, model consistency can't be guaranteed." msgstr "" "Ви намагаєтеся видалити обʼєкт, який є частиною розрізаного обʼєкта.\n" "Ця дія призведе до видалення інформації про розріз.\n" "Після цього узгодженість моделі не може бути гарантована." msgid "Delete Object" msgstr "Видалити обʼєкт" msgid "Delete All Objects" msgstr "Видалити всі обʼєкти" msgid "Reset Project" msgstr "Скинути проєкт" msgid "The selected object couldn't be split." msgstr "Вибраний обʼєкт не може бути поділений." msgid "Split to Objects" msgstr "Розділити по обʼєктах" msgid "Disable Auto-Drop to preserve Z positioning?\n" msgstr "Вимкнути авто-кидання, щоб зберегти розташування по осі Z?\n" msgid "Object with floating parts was detected" msgstr "Виявлено обʼєкт з плаваючими частинами" msgid "Another export job is running." msgstr "Виконується інше завдання експорту." msgid "Unable to replace with more than one volume" msgstr "Неможливо замінити більше, ніж один об’єм" msgid "Error during replacement" msgstr "Помилка заміни" msgid "Replace from:" msgstr "Замінити з:" msgid "Select a new file" msgstr "Виберіть новий файл" msgid "File for the replacement wasn't selected" msgstr "Не вибраний файл для заміни" msgid "Replace with 3D file" msgstr "Замінити 3D-файлом" msgid "Select folder to replace from" msgstr "Вибрати теку для заміни з" msgid "Directory for the replace wasn't selected" msgstr "Каталог для заміни не вибрано" msgid "Replaced with 3D files from directory:\n" msgstr "Замінено 3D-файлами з каталогу:\n" #, c-format, boost-format msgid "✖ Skipped %s: same file.\n" msgstr "✖ Пропущено %s: той самий файл.\n" #, c-format, boost-format msgid "✖ Skipped %s: file does not exist.\n" msgstr "✖ Пропущено %s: файл не існує.\n" #, c-format, boost-format msgid "✖ Skipped %s: failed to replace.\n" msgstr "✖ Пропущено %s: не вдалося замінити.\n" #, c-format, boost-format msgid "✔ Replaced %s.\n" msgstr "✔ Замінено %s.\n" msgid "Replaced volumes" msgstr "Замінені обʼєми" msgid "Please select a file" msgstr "Будь ласка, виберіть файл" msgid "Do you want to replace it" msgstr "Ви хочете замінити його" msgid "Message" msgstr "Повідомлення" msgid "Reload from:" msgstr "Перезавантажити з:" msgid "Unable to reload:" msgstr "Не вдається перезавантажити:" msgid "Error during reload" msgstr "Помилка під час перезавантаження" msgid "Reload all" msgstr "Перезавантажити все" msgid "There are warnings after slicing models:" msgstr "Є попередження після нарізки моделей:" msgid "warnings" msgstr "попередження" msgid "Invalid data" msgstr "Неправильні дані" msgid "Slicing Canceled" msgstr "Нарізка скасована" #, c-format, boost-format msgid "Slicing Plate %d" msgstr "Пластина для нарізки %d" msgid "Please resolve the slicing errors and publish again." msgstr "Виправте помилки нарізки та опублікуйте знову." msgid "Network plug-in switched successfully." msgstr "Мережевий плагін змінено успішно." msgid "Success" msgstr "Успішно" msgid "Failed to load network plug-in. Please restart the application." msgstr "Не вдалося завантажити мережевий плагін. Будь ласка, перезапустіть програму." msgid "The network plug-in was not detected. Network related features are unavailable." msgstr "Мережевий плагін не виявлено. Функції, повʼязані з мережею, недоступні." msgid "" "Preview only mode:\n" "The loaded file contains G-code only, cannot enter the Prepare page." msgstr "" "Режим тільки попереднього перегляду:\n" "Завантажений файл містить лише gcode, не вдається увійти на сторінку підготовки" # AI Translated msgid "" "The nozzle type and AMS quantity information has not been synced from the connected printer.\n" "After syncing, software can optimize printing time and filament usage when slicing.\n" "Would you like to sync now?" msgstr "" "Інформацію про тип сопла та кількість AMS не синхронізовано з підключеним принтером.\n" "Після синхронізації програма зможе оптимізувати час друку та витрату філаменту під час нарізки.\n" "Бажаєте синхронізувати зараз?" msgid "Sync now" msgstr "Синхронізувати зараз" # AI Translated msgid "Texture import failed. The model appears to contain texture data, but the texture import process could not be completed. The model will be imported as geometry only." msgstr "Не вдалося імпортувати текстуру. Схоже, модель містить дані текстури, але завершити процес імпорту не вдалося. Модель буде імпортовано лише як геометрію." # AI Translated msgid "Applying texture colors..." msgstr "Застосування кольорів текстури..." # AI Translated msgid "Updating 3D view..." msgstr "Оновлення 3D-вигляду..." # AI Translated msgid "Texture colors applied." msgstr "Кольори текстури застосовано." msgid "You can keep the modified presets for the new project or discard them" msgstr "Ви можете зберегти змінені пресети у новому проекті або відмовитися від них" msgid "Creating a new project" msgstr "Створення нового проєкту" msgid "Load project" msgstr "Завантажити проект" # AI Translated msgid "" "Failed to save the project.\n" "Please check whether the folder exists online or if other programs have the project file open." msgstr "" "Не вдалося зберегти проект.\n" "Будь ласка, перевірте, чи існує папка в мережі та чи не відкрито файл проекту іншими програмами." msgid "Save project" msgstr "Зберегти проект" msgid "Importing Model" msgstr "Імпорт моделі" msgid "Preparing 3MF file..." msgstr "підготувати файл 3MF..." msgid "Download failed; unknown file format." msgstr "Не вдалося завантажити, невідомий формат файлу." msgid "Downloading project..." msgstr "завантажую проект..." msgid "Download failed; File size exception." msgstr "Завантаження не вдалося через виняток розміру файлу." #, c-format, boost-format msgid "Project downloaded %d%%" msgstr "Проект завантажено %d%%" msgid "Importing to Orca Slicer failed. Please download the file and manually import it." msgstr "Не вдалося імпортувати файл до Orca Slicer. Завантажте файл і імпортуйте його вручну." msgid "INFO:" msgstr "ІНФО:" # AI Translated msgid "No accelerations provided for calibration. Use default acceleration value " msgstr "Для калібрування не вказано прискорень. Використовується типове значення прискорення " msgid "No speeds provided for calibration. Use default optimal speed " msgstr "Не вказано швидкості для калібрування. Використовувати типову оптимальну швидкість " msgid "Import SLA archive" msgstr "Імпорт SLА-архіву" msgid "The selected file" msgstr "Вибраний файл" msgid "Does not contain valid G-code." msgstr "не містить дійсний gcode." msgid "An Error has occurred while loading the G-code file." msgstr "Помилка під час завантаження файлу G-коду" #. TRN %1% is archive path #, boost-format msgid "Loading of a ZIP archive on path %1% has failed." msgstr "Не вдалося завантажити ZIP-архів за шляхом %1%." #. TRN: First argument = path to file, second argument = error description #, boost-format msgid "Failed to unzip file to %1%: %2%" msgstr "Не вдалося розархівувати файл до %1%: %2%" #, boost-format msgid "Failed to find unzipped file at %1%. Unzipping of file has failed." msgstr "Не вдалося знайти розархівований файл за адресою %1%. Не вдалося розархівувати файл." msgid "Drop project file" msgstr "Видалити файл проекту" msgid "Please select an action" msgstr "Виберіть дію" msgid "Open as project" msgstr "Відкрити як проєкт" msgid "Import geometry only" msgstr "Імпортувати лише геометрію" msgid "Only one G-code file can be opened at a time." msgstr "Водночас можна відкрити лише один файл G-коду." msgid "G-code loading" msgstr "Завантаження G-коду" msgid "G-code files and models cannot be loaded together!" msgstr "Файли G-коду не можна завантажувати разом із моделями!" msgid "Unable to add models in preview mode" msgstr "Неможливо додати моделі у режимі попереднього перегляду!" msgid "All objects will be removed, continue?" msgstr "Усі обʼєкти будуть видалені, продовжити?" # AI Translated msgid "The current project has unsaved changes. Would you like to save before continuing?" msgstr "У поточному проекті є незбережені зміни. Зберегти їх перед тим, як продовжити?" msgid "Number of copies:" msgstr "Кількість копій:" msgid "Copies of the selected object" msgstr "Копії вибраного обʼєкта" msgid "Save G-code file as:" msgstr "Збережіть файл G-коду як:" msgid "Save SLA file as:" msgstr "Зберегти файл SLA як:" msgid "The provided file name is not valid." msgstr "Подана назва файлу недійсна." msgid "The following characters are not allowed by a FAT file system:" msgstr "Слідуючі символи не допускаються файловою системою FAT:" msgid "Save Sliced file as:" msgstr "Зберегти нарізаний файл як:" #, c-format, boost-format msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer." msgstr "Файл %s надіслано до памʼяті принтера та доступний для перегляду на принтері." msgid "Publish 3MF file as:" msgstr "" msgid "" "Failed to export the published 3MF file.\n" "Please check whether the folder exists online or if other programs have the file open." msgstr "" msgid "Publish" msgstr "Публікувати" msgid "The nozzle type is not set. Please set the nozzle and try again." msgstr "Тип сопла не встановлений. Будь ласка, оберіть сопло та спробуйте ще раз." msgid "The nozzle type is not set. Please check." msgstr "Тип сопла не встановлений. Перевірте, будь ласка." msgid "Unable to perform boolean operation on model meshes. Only positive parts will be kept. You may fix the meshes and try again." msgstr "Неможливо виконати булеву операцію на сітках моделі. Будуть залишені лише позитивні частини. Ви можете виправити сітки і спробувати ще раз." #, boost-format msgid "Reason: part \"%1%\" is empty." msgstr "Причина: частина “%1%” порожня." #, boost-format msgid "Reason: part \"%1%\" does not bound a volume." msgstr "Причина: частина “%1%” не обмежує об’єм." #, boost-format msgid "Reason: part \"%1%\" has self intersection." msgstr "Причина: частина “%1%” має самоперетин." #, boost-format msgid "Reason: \"%1%\" and another part have no intersection." msgstr "Причина: “%1%” та інша частина не мають перетину." msgid "Unable to perform boolean operation on model meshes. Only positive parts will be exported." msgstr "Не можливо виконати булеву операцію на сітках моделі. Тільки позитивні частини будуть експортовані." # AI Translated msgid "Flashforge host is not available." msgstr "Хост Flashforge недоступний." msgid "Unable to log in to the Flashforge printer." msgstr "Не можливо ввійти в принтер Flashforge." msgid "Is the printer ready? Is the print sheet in place, empty and clean?" msgstr "Чи готовий принтер? Чи на місці поверхня для друку, вона чиста і порожня?" msgid "Upload and Print" msgstr "Завантажити і друкувати" msgid "Abnormal print file data. Please slice again" msgstr "Неправильні дані файлу друку. Будь ласка, наріжте знову" msgid "" "Print By Object: \n" "We suggest using auto-arrange to avoid collisions when printing." msgstr "" "Друк за обʼєктом: \n" "Рекомендовано використовувати автоматичне впорядкування, щоб уникнути колізій під час друку." msgid "Send G-code" msgstr "Надіслати G-код" msgid "Send to printer" msgstr "Надіслати на принтер" msgid "Custom supports and color painting were removed before repairing." msgstr "Власні підтримки та кольорове фарбування видалені перед виправленням." msgid "Optimize Rotation" msgstr "Оптимізація повороту" # AI Translated #, c-format, boost-format msgid "Printer not connected. Please go to the device page to connect %s before syncing." msgstr "Принтер не підключено. Перейдіть на сторінку пристрою, щоб підключити %s перед синхронізацією." # AI Translated #, c-format, boost-format msgid "OrcaSlicer can't connect to %s. Please check if the printer is powered on and connected to the network." msgstr "OrcaSlicer не може підключитися до %s. Перевірте, чи принтер увімкнено та підключено до мережі." # AI Translated #, c-format, boost-format msgid "The currently connected printer on the device page is not %s. Please switch to %s before syncing." msgstr "Поточно підключений принтер на сторінці пристрою — не %s. Перемкніться на %s перед синхронізацією." msgid "There are no filaments on the printer. Please load the filaments on the printer first." msgstr "В принтері немає філаментів. Будь ласка, спочатку завантажте філаменти в принтер." msgid "The filaments on the printer are all unknown types. Please go to the printer screen or software device page to set the filament type." msgstr "Філаменти в принтері невідомого типу. Будь ласка, змініть тип філаменту на принтері чи на сторінці принтера." msgid "Device Page" msgstr "Сторінка принтера" msgid "Synchronize AMS Filament Information" msgstr "Синхронізувати інформацію про філаменти з AMS" # AI Translated msgid "OrcaCloud plugins required by the current preset are not installed:" msgstr "Плагіни OrcaCloud, потрібні для поточного пресету, не встановлено:" # AI Translated msgid "Install Plugins" msgstr "Встановити плагіни" # AI Translated msgid "Local plugins required by the current preset are missing:" msgstr "Локальні плагіни, потрібні для поточного пресету, відсутні:" # AI Translated msgid "Find on OrcaCloud" msgstr "Знайти в OrcaCloud" # AI Translated msgid "Plugins required by the current preset are not activated:" msgstr "Плагіни, потрібні для поточного пресету, не активовано:" # AI Translated msgid "Activate Now" msgstr "Активувати зараз" # AI Translated msgid "The installed plugin does not provide the required capability — it may be outdated:" msgstr "Встановлений плагін не надає потрібної можливості — можливо, він застарів:" # AI Translated msgid "Preparing to install plugins..." msgstr "Підготовка до встановлення плагінів..." # AI Translated msgid "Installing plugins" msgstr "Встановлення плагінів" # AI Translated msgid "Cancelling — finishing the current plugin..." msgstr "Скасування — завершення поточного плагіна..." # AI Translated #, boost-format msgid "Installing %1%..." msgstr "Встановлення %1%..." msgid "Plate Settings" msgstr "Параметри планшета" #, boost-format msgid "Number of currently selected parts: %1%\n" msgstr "Кількість вибраних зараз деталей: %1%\n" #, boost-format msgid "Number of currently selected objects: %1%\n" msgstr "Кількість обʼєктів, що вибрані зараз: %1%\n" #, boost-format msgid "Part name: %1%\n" msgstr "Назва частини: %1%\n" #, boost-format msgid "Object name: %1%\n" msgstr "Назва обʼєкта: %1%\n" #, boost-format msgid "Size: %1% x %2% x %3% in\n" msgstr "Розмір: %1% x %2% x %3% in\n" #, boost-format msgid "Size: %1% x %2% x %3% mm\n" msgstr "Розмір: %1% x %2% x %3% мм\n" #, boost-format msgid "Volume: %1% in³\n" msgstr "Обʼєм: %1% in³\n" #, boost-format msgid "Volume: %1% mm³\n" msgstr "Обʼєм: %1% мм³\n" #, boost-format msgid "Triangles: %1%\n" msgstr "Трикутники: %1%\n" msgid "Use \"Fix Model\" to repair the mesh." msgstr "Використовуйте \"Виправити модель\", щоб виправити сітку." # AI Translated #, c-format, boost-format msgid "Plate %d: %s is not suggested for use printing filament %s (%s). If you still want to do this print job, please set this filament's bed temperature to a number that is not zero." msgstr "Пластина %d: %s не рекомендується для друку філаментом %s (%s). Якщо ви все одно хочете виконати це завдання друку, встановіть для цього філаменту ненульову температуру столу." # AI Translated msgid "Currently, the object configuration form cannot be used with a multiple-extruder printer." msgstr "Наразі форму конфігурації обʼєкта не можна використовувати з багатоекструдерним принтером." msgid "Not available" msgstr "Недоступно" msgid "isometric" msgstr "ізометрично" msgid "top_front" msgstr "верх_перед" msgid "top" msgstr "верх" msgid "bottom" msgstr "низ" msgid "front" msgstr "перед" msgid "rear" msgstr "зад" msgid "Switching languages requires the application to restart.\n" msgstr "Для перемикання мови потрібно перезапустити програму.\n" msgid "Do you want to continue?" msgstr "Ви хочете продовжувати?" msgid "Language selection" msgstr "Вибір мови" msgid "Asia-Pacific" msgstr "Азіатсько-Тихоокеанський регіон" msgid "China" msgstr "Китай" msgid "Europe" msgstr "Європа" msgid "North America" msgstr "Північна Америка" msgid "Others" msgstr "Інші" msgid "Changing the region will log you out of your account.\n" msgstr "Зміна регіону призведе до виходу з вашого облікового запису.\n" msgid "Region selection" msgstr "Вибір регіону" msgid "sec" msgstr "сек" msgid "The period of backup in seconds." msgstr "Період резервного копіювання в секундах." # AI Translated msgid "Bed Temperature Difference Warning" msgstr "Попередження про різницю температур столу" # AI Translated msgid "" "Using filaments with significantly different temperatures may cause:\n" "• Extruder clogging\n" "• Nozzle damage\n" "• Layer adhesion issues\n" "\n" "Continue with enabling this feature?" msgstr "" "Використання філаментів зі значно різними температурами може спричинити:\n" "• Засмічення екструдера\n" "• Пошкодження сопла\n" "• Проблеми зі зчепленням шарів\n" "\n" "Продовжити та увімкнути цю функцію?" msgid "Browse" msgstr "Переглядати" msgid "Choose folder for downloaded items" msgstr "Оберіть теку для завантажених елементів" msgid "Choose Download Directory" msgstr "Оберіть каталог для завантаження" # AI Translated #, c-format, boost-format msgid "" "You've selected network plug-in version %s.\n" "\n" "Would you like to download and install this version now?\n" "\n" "Note: The application may need to restart after installation." msgstr "" "Ви вибрали версію мережевого плагіна %s.\n" "\n" "Бажаєте завантажити та встановити цю версію зараз?\n" "\n" "Примітка: після встановлення застосунок може потребувати перезапуску." msgid "Download Network Plug-in" msgstr "Завантажити мережевий плагін" msgid "Reload the network plug-in without restarting the application" msgstr "Перезавантажити мережевий плагін без перезапуску програми" msgid "Network plug-in reloaded successfully." msgstr "Мережевий плагін перезавантажено успішно." msgid "Reload" msgstr "Перезавантажити" msgid "Failed to reload network plug-in. Please restart the application." msgstr "Не вдалося перезавантажити мережевий плагін. Будь ласка, перезапустіть програму." msgid "Reload Failed" msgstr "Не вдалося перезавантажити" msgid "Associate" msgstr "Ассоціювати" msgid "with OrcaSlicer so that Orca can open models from" msgstr "з OrcaSlicer так що Orca могла відкривати моделі з" msgid "Current Association: " msgstr "Поточна асоціація: " msgid "Current Instance" msgstr "Поточна Інсталяція" msgid "Current Instance Path: " msgstr "Шлях Поточної Інсталяції: " msgid "General" msgstr "Загальні" msgid "Metric" msgstr "Метрика" msgid "Imperial" msgstr "Імперський" msgid "Units" msgstr "Одиниці виміру" msgid "Home" msgstr "Домашня" msgid "Default page" msgstr "Типова сторінка" msgid "Set the page opened on startup." msgstr "Задати сторінку, яка відкривається при запуску." msgid "Enable dark Mode" msgstr "Увімкнути темний режим" msgid "Allow only one OrcaSlicer instance" msgstr "Дозволити лише один екземпляр OrcaSlicer" msgid "On OSX there is always only one instance of app running by default. However it is allowed to run multiple instances of same app from the command line. In such case this settings will allow only one instance." msgstr "На MacOS за замовчуванням завжди працює лише один екземпляр програми. Однак з командного рядка дозволяється запускати кілька екземплярів однієї й тієї ж програми. У цьому випадку цей параметр дозволить запускати лише один екземпляр." msgid "If this is enabled, when starting OrcaSlicer and another instance of the same OrcaSlicer is already running, that instance will be reactivated instead." msgstr "Якщо цей параметр увімкнено, під час запуску OrcaSlicer, коли вже запущено інший екземпляр того ж самого OrcaSlicer, цей екземпляр буде повторно активовано замість нього." msgid "Show splash screen" msgstr "Показувати заставку" msgid "Show the splash screen during startup." msgstr "Показувати заставку під час запуску." msgid "Use window buttons on left side" msgstr "Використовувати кнопки вікна з лівої сторони" msgid "(Requires restart)" msgstr "(Потрібен перезапуск)" msgid "Downloads folder" msgstr "Тека завантаження" msgid "Target folder for downloaded items" msgstr "Тека призначення для завантажених елементів" msgid "Load All" msgstr "Завантажити все" msgid "Ask When Relevant" msgstr "Запитувати коли доречно" msgid "Always Ask" msgstr "Запитувати завжди" msgid "Load Geometry Only" msgstr "Завантажити Тільки Геометрію" msgid "Load behaviour" msgstr "Поведінка завантаження" msgid "Should printer/filament/process settings be loaded when opening a 3MF file?" msgstr "Чи повинні бути завантажені налаштування принтера/філаменту/процесу при відкритті файлу .3mf?" msgid "Auto backup" msgstr "Автобекап" msgid "Backup your project periodically to help with restoring from an occasional crash." msgstr "Періодично робіть резервну копію вашого проекту для відновлення після випадкового збою." msgid "Maximum recent files" msgstr "Максимальна кількість останніх файлів" msgid "Maximum count of recent files" msgstr "Максимальна кількість останніх файлів" msgid "Add STL/STEP files to recent files list" msgstr "Додати файли STL/STEP до списку останніх файлів" msgid "Don't warn when loading 3MF with modified G-code" msgstr "Немає попереджень при завантаженні файлу 3MF із зміненими G-кодами" msgid "Show options when importing STEP file" msgstr "Показувати параметри під час імпортування файлу STEP" # AI Translated msgid "If enabled, a parameter settings dialog will appear during STEP file import." msgstr "Якщо увімкнено, під час імпорту файлу STEP зʼявлятиметься діалогове вікно налаштування параметрів." # AI Translated msgid "STEP importing: linear deflection" msgstr "Імпорт STEP: лінійне відхилення" # AI Translated msgid "" "Linear deflection used when meshing imported STEP files.\n" "Smaller values produce higher-quality meshes but increase processing time.\n" "Used as the default in the import dialog, or directly when the import dialog is disabled.\n" "Default: 0.003 mm." msgstr "" "Лінійне відхилення, що використовується під час побудови сітки для імпортованих файлів STEP.\n" "Менші значення дають сітки вищої якості, але збільшують час обробки.\n" "Використовується як типове значення в діалоговому вікні імпорту або безпосередньо, коли діалогове вікно імпорту вимкнено.\n" "Типове значення: 0.003 мм." # AI Translated msgid "STEP importing: angle deflection" msgstr "Імпорт STEP: кутове відхилення" # AI Translated msgid "" "Angle deflection used when meshing imported STEP files.\n" "Smaller values produce higher-quality meshes but increase processing time.\n" "Used as the default in the import dialog, or directly when the import dialog is disabled.\n" "Default: 0.5." msgstr "" "Кутове відхилення, що використовується під час побудови сітки для імпортованих файлів STEP.\n" "Менші значення дають сітки вищої якості, але збільшують час обробки.\n" "Використовується як типове значення в діалоговому вікні імпорту або безпосередньо, коли діалогове вікно імпорту вимкнено.\n" "Типове значення: 0.5." msgid "STEP importing: Split into multiple objects" msgstr "Імпортування STEP: Розділити на декілька обʼєктів" # AI Translated msgid "" "If enabled, compound and compsolid shapes in imported STEP files are split into multiple objects.\n" "Used as the default in the import dialog, or directly when the import dialog is disabled.\n" "Default: disabled." msgstr "" "Якщо увімкнено, складені (compound) та compsolid форми в імпортованих файлах STEP розділяються на кілька обʼєктів.\n" "Використовується як типове значення в діалоговому вікні імпорту або безпосередньо, коли діалогове вікно імпорту вимкнено.\n" "Типово: вимкнено." msgid "Quality level for Draco export" msgstr "Рівень якості для експортування Draco" msgid "bits" msgstr "бітів" # AI Translated msgid "" "Controls the quantization bit depth used when compressing the mesh to Draco format.\n" "0 = lossless compression (geometry is preserved at full precision). Valid lossy values range from 8 to 30.\n" "Lower values produce smaller files but lose more geometric detail; higher values preserve more detail at the cost of larger files." msgstr "" "Керує глибиною квантування, що використовується під час стиснення сітки у формат Draco.\n" "0 = стиснення без втрат (геометрія зберігається з повною точністю). Допустимі значення з втратами — від 8 до 30.\n" "Менші значення дають менші файли, але втрачається більше геометричних деталей; більші значення зберігають більше деталей ціною більшого розміру файлів." # AI Translated msgid "Store full source file paths in projects" msgstr "Зберігати повні шляхи до вихідних файлів у проєктах" # AI Translated msgid "If enabled, saved projects store the absolute path to imported source files (STEP/STL/...), so \"Reload from disk\" still works when the source file is kept in a different folder than the project. If disabled, only the filename is stored, which keeps projects portable and avoids embedding absolute paths." msgstr "Якщо увімкнено, збережені проєкти зберігають абсолютний шлях до імпортованих вихідних файлів (STEP/STL/...), тому \"Перезавантажити з диска\" працюватиме навіть тоді, коли вихідний файл зберігається в іншій теці, ніж проєкт. Якщо вимкнено, зберігається лише імʼя файлу, що робить проєкти переносними й уникає вбудовування абсолютних шляхів." msgid "Preset" msgstr "Пресет" msgid "Remember printer configuration" msgstr "Запамʼятати конфігурацію принтера" msgid "If enabled, Orca will remember and switch filament/process configuration for each printer automatically." msgstr "Якщо увімкнено, Orca запамʼятовує та автоматично перемикає конфігурацію нитки/процесу для кожного принтера." msgid "Group user filament presets" msgstr "Групувати пресети користувацьких філаментів" msgid "Group user filament presets based on selection" msgstr "Групувати пресети користувацьких філаментів на основі вибраного" msgid "By type" msgstr "За типом" msgid "By vendor" msgstr "За виробником" # AI Translated msgid "Optimize filaments area height for..." msgstr "Оптимізувати висоту області філаментів для..." msgid "filaments" msgstr "філаменти" # AI Translated msgid "Optimizes filament area maximum height by chosen filament count." msgstr "Оптимізує максимальну висоту області філаментів за вибраною кількістю філаментів." msgid "Show shared profiles notification" msgstr "Показувати сповіщення спільних профілів" # AI Translated msgid "Show a notification with a link to browse shared profiles when the selected printer is changed." msgstr "Показувати сповіщення з посиланням для перегляду спільних профілів під час зміни вибраного принтера." msgid "Features" msgstr "Можливості" msgid "Multi device management" msgstr "Керування кількома пристроями" msgid "With this option enabled, you can send a task to multiple devices at the same time and manage multiple devices." msgstr "З цією опцією ввімкненою, ви можете відправляти завдання на кілька пристроїв одночасно та керувати декількома пристроями." # AI Translated msgid "Pop up to select filament grouping mode" msgstr "Показувати вікно вибору режиму групування філаментів" # AI Translated msgid "Visible plugin pages" msgstr "Видимі сторінки плагінів" # AI Translated msgid "pages" msgstr "стор." # AI Translated msgid "Number of plugin pages shown as fixed tabs before the remaining pages collapse into a dropdown on the last tab." msgstr "Кількість сторінок плагінів, що показуються як закріплені вкладки, перш ніж решта сторінок згорнеться у випадний список на останній вкладці." msgid "Behaviour" msgstr "Поведінка" # AI Translated msgid "Auto flush after changing..." msgstr "Автоматична промивка після зміни..." # AI Translated msgid "Auto calculate flushing volumes when selected values changed" msgstr "Автоматично обчислювати обʼєми промивки, коли змінюються вибрані значення" msgid "Auto arrange plate after cloning" msgstr "Автоматично впорядкувати пластину після копіювання" msgid "Auto slice after changes" msgstr "Авто-нарізання після змін" # AI Translated msgid "If enabled, OrcaSlicer will re-slice automatically whenever slicing-related settings change." msgstr "Якщо увімкнено, OrcaSlicer автоматично виконуватиме повторну нарізку щоразу, коли змінюються повʼязані з нарізкою налаштування." # AI Translated msgid "Delay in seconds before auto slicing starts, allowing multiple edits to be grouped. Use 0 to slice immediately." msgstr "Затримка в секундах перед початком автоматичної нарізки, що дає змогу згрупувати кілька змін. Використовуйте 0, щоб нарізати негайно." msgid "Remove mixed temperature restriction" msgstr "Вилучити обмеження змішаної температури" # AI Translated msgid "With this option enabled, you can print materials with a large temperature difference together." msgstr "Якщо цю опцію увімкнено, ви можете друкувати разом матеріалами зі значною різницею температур." msgid "Touchpad" msgstr "Тачпад" msgid "Camera style" msgstr "Тип камери" msgid "" "Select camera navigation style.\n" "Default: LMB+move for rotation, RMB/MMB+move for panning.\n" "Touchpad: Alt+move for rotation, Shift+move for panning." msgstr "" "Вибір стилю навігації камерою.\n" "За замовчуванням: ЛКМ+рух для обертання, ПКМ/СКМ+рух для панорамування.\n" "Сенсорна панель: Alt+рух для обертання, Shift+рух для панорамування." # AI Translated msgid "Orbit speed multiplier" msgstr "Множник швидкості обертання" # AI Translated msgid "Multiplies the orbit speed for finer or coarser camera movement." msgstr "Множить швидкість обертання для точнішого або грубішого руху камери." msgid "Zoom to mouse position" msgstr "Масштабувати до положення миші" msgid "Zoom in towards the mouse pointer's position in the 3D view, rather than the 2D window center." msgstr "Масштабувати до положення курсору миші у 3D-виді, а не до центру 2D вікна." msgid "Use free camera" msgstr "Використовувати вільну камеру" msgid "If enabled, use free camera. If not enabled, use constrained camera." msgstr "Якщо увімкнено, використовуватиметься вільна камера. Якщо вимкнено, використовуватиметься камера з обмеженими можливостями." msgid "Reverse mouse zoom" msgstr "Зворотне масштабування мишкою" msgid "If enabled, reverses the direction of zoom with mouse wheel." msgstr "Якщо увімкнено, змінює напрямок масштабування за допомогою коліщатка миші." # AI Translated msgid "Pan" msgstr "Панорамування" msgid "Left Mouse Drag" msgstr "Перетягування лівою кнопкою миші" # AI Translated msgid "Set the action that dragging the left mouse button should perform." msgstr "Задає дію, яку має виконувати перетягування лівою кнопкою миші." msgid "Middle Mouse Drag" msgstr "Перетягування середньою кнопкою миші" # AI Translated msgid "Set the action that dragging the middle mouse button should perform." msgstr "Задає дію, яку має виконувати перетягування середньою кнопкою миші." msgid "Right Mouse Drag" msgstr "Перетягування правою кнопкою миші" # AI Translated msgid "Set the action that dragging the right mouse button should perform." msgstr "Задає дію, яку має виконувати перетягування правою кнопкою миші." # AI Translated msgid "Clear my choice on..." msgstr "Очистити мій вибір для..." msgid "Unsaved projects" msgstr "Незбережені проєкти" msgid "Clear my choice on the unsaved projects." msgstr "Очистити мій вибір для незбережених проектів." msgid "Unsaved presets" msgstr "Незбережені пресети" msgid "Clear my choice on the unsaved presets." msgstr "Очистити мій вибір для незбережених профілів." msgid "Synchronizing printer preset" msgstr "Синхронізація пресету принтера" # AI Translated msgid "Clear my choice for synchronizing printer preset after loading the file." msgstr "Очистити мій вибір щодо синхронізації пресету принтера після завантаження файлу." msgid "Graphics" msgstr "Графіка" msgid "Smooth normals" msgstr "Згладити нормалі" # AI Translated msgid "" "Applies smooth normals to the model.\n" "\n" "Requires manual scene reload to take effect (right-click on 3D view → \"Reload All\")." msgstr "" "Застосовує згладжені нормалі до моделі.\n" "\n" "Потребує ручного перезавантаження сцени, щоб набути чинності (клацніть правою кнопкою миші у 3D-вигляді → \"Перезавантажити все\")." msgid "Phong shading" msgstr "Затінення Phong" msgid "Uses Phong shading inside realistic view." msgstr "Використовувати затінення Phong в реалістичному вигляді." msgid "SSAO ambient occlusion" msgstr "Навколишнє затінення SSAO" msgid "Applies SSAO in realistic view." msgstr "Застосовує SSAO в реалістичному вигляді." msgid "Shadows" msgstr "Тіні" msgid "Renders cast shadows on the plate, other objects, and each object onto itself in realistic view." msgstr "Малює падаючі тіні на пластині, інших обʼєктах і на кожному самому обʼєкті в реалістичному вигляді." msgid "Anti-aliasing" msgstr "Згладжування" msgid "MSAA Multiplier" msgstr "Множник MSAA" # AI Translated msgid "" "Set the Multi-Sample Anti-Aliasing level.\n" "Higher values result in smoother edges, but the impact on performance is exponential.\n" "Lower values improve performance, at the cost of jagged edges.\n" "If disabled, its recommended to enable FXAA to reduce jagged edges with minimal performance impact.\n" "\n" "Requires application restart." msgstr "" "Задає рівень згладжування Multi-Sample Anti-Aliasing.\n" "Вищі значення дають гладкіші краї, але вплив на продуктивність експоненційний.\n" "Нижчі значення підвищують продуктивність ціною зубчастих країв.\n" "Якщо вимкнено, рекомендується увімкнути FXAA, щоб зменшити зубчастість країв з мінімальним впливом на продуктивність.\n" "\n" "Потребує перезапуску застосунку." msgid "Disabled" msgstr "Вимкнено" msgid "FXAA post-processing" msgstr "Постобробка FXAA" # AI Translated msgid "" "Applies Fast Approximate Anti-Aliasing as a screen-space pass.\n" "Useful for disabling or reducing the MSAA setting to improve performance.\n" "\n" "Takes effect immediately." msgstr "" "Застосовує Fast Approximate Anti-Aliasing як прохід в екранному просторі.\n" "Корисно для вимкнення або зменшення налаштування MSAA задля підвищення продуктивності.\n" "\n" "Набуває чинності негайно." msgid "FPS" msgstr "FPS" msgid "FPS cap" msgstr "FPS cap" msgid "(0 = unlimited)" msgstr "(0 = необмежено)" # AI Translated msgid "" "Limits viewport frame rate to reduce GPU load and power usage.\n" "Set to 0 for unlimited frame rate." msgstr "" "Обмежує частоту кадрів вікна перегляду, щоб зменшити навантаження на GPU та енергоспоживання.\n" "Встановіть 0 для необмеженої частоти кадрів." # AI Translated msgid "Show FPS overlay" msgstr "Показувати накладку FPS" # AI Translated msgid "Displays current viewport FPS in the top-right corner." msgstr "Показує поточний FPS вікна перегляду у верхньому правому куті." # AI Translated msgid "G-code Preview" msgstr "Перегляд G-коду" # AI Translated msgid "Dim lower layers" msgstr "Затемнювати нижні шари" # AI Translated msgid "When scrubbing the layer slider in the sliced preview, render the layers below the current one darkened so that only the layer being viewed is shown at full brightness." msgstr "Під час прокручування повзунка шарів у попередньому перегляді нарізки відображати шари нижче поточного затемненими, щоб лише переглядуваний шар показувався з повною яскравістю." # AI Translated msgid "Dimmed layer brightness" msgstr "Яскравість затемнених шарів" msgid "%" msgstr "%" # AI Translated msgid "" "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n" "99% is barely darkened, 0% renders them black. Capped at 99% because 100% would be the same as disabling the option." msgstr "" "Наскільки яскраво відображаються затемнені шари, коли увімкнено параметр «Затемнювати нижні шари».\n" "99% — затемнення майже непомітне, 0% — шари стають чорними. Максимум обмежено 99%, оскільки 100% дорівнювало б вимкненню параметра." msgid "Login region" msgstr "Регіон входу" msgid "Stealth mode" msgstr "Прихований режим" # AI Translated msgid "" "This disables all cloud features, including Orca Cloud profile syncing. Users who prefer to work entirely offline can enable this option.\n" "Note: When Stealth Mode is enabled, your user profiles will not be backed up to Orca Cloud." msgstr "" "Це вимикає всі хмарні функції, зокрема синхронізацію профілів Orca Cloud. Користувачі, які надають перевагу повністю автономній роботі, можуть увімкнути цю опцію.\n" "Примітка: коли увімкнено прихований режим, ваші профілі користувача не резервуватимуться в Orca Cloud." msgid "Hide login side panel" msgstr "Сховати логін на бічній панелі" msgid "Hide the login side panel on the home page." msgstr "Сховати вхід на бічній панелі на домашній сторінці" msgid "Network test" msgstr "Тест мережі" msgid "Test" msgstr "Тест" msgid "Cloud Providers" msgstr "Провайдери хмари" msgid "Enable Bambu Cloud" msgstr "Дозволити Bambu Cloud" # AI Translated msgid "Allow logging into Bambu Cloud alongside Orca Cloud. When enabled, a Bambu login section appears on the homepage." msgstr "Дозволити вхід у Bambu Cloud поряд з Orca Cloud. Якщо увімкнено, на головній сторінці зʼявляється розділ входу Bambu." msgid "Update & sync" msgstr "Оновити і синхронізувати" msgid "Check for stable updates only" msgstr "Перевіряти лише стабільні оновлення" msgid "Auto sync user presets (Printer/Filament/Process)" msgstr "Автоматична синхронізація користувацьких профілів (принтер/філамент/процес)" msgid "Filament sync mode" msgstr "Режим синхронізації філаменту" # AI Translated msgid "Choose whether sync updates both filament preset and color, or only color." msgstr "Виберіть, чи синхронізація оновлює і пресет філаменту, і колір, чи лише колір." msgid "Filament & Color" msgstr "Філамент і колір" msgid "Color only" msgstr "Лише колір" msgid "Update built-in presets automatically." msgstr "Оновити вбудовані пресети автоматично." msgid "Use encrypted file for token storage" msgstr "Використовувати шифрований файл для сховища токену" msgid "Store authentication tokens in an encrypted file instead of the system keychain. (Requires restart)" msgstr "Зберігати токени автентифікації в шифрованому файлі замість вʼязки ключів системи. (Потрібен перезапуск)" msgid "Bambu network plug-in" msgstr "Мережевий плагін Bambu" msgid "Enable Bambu network plug-in" msgstr "Дозволити мережевий плагін Bambu" msgid "Network plug-in version" msgstr "Версія мережевого плагіна" msgid "Select the network plug-in version to use" msgstr "Вибрати версію мережевого плагіна для використання" msgid "Associate files to OrcaSlicer" msgstr "Асоціювати файли з OrcaSlicer" msgid "File associations for the Microsoft Store version are managed by Windows Settings." msgstr "Асоціації файлів для версії з Microsoft Strore керуються налаштуваннями Windows." msgid "Open Windows Default Apps Settings" msgstr "Відкрити налаштування типових програм Windows" msgid "Associate 3MF files to OrcaSlicer" msgstr "Асоціювати файли .3mf з OrcaSlicer" # AI Translated msgid "If enabled, this sets OrcaSlicer as the default application to open 3MF files." msgstr "Якщо ввімкнено, встановлює OrcaSlicer як програму за замовчуванням для відкриття файлів 3MF" msgid "Associate DRC files to OrcaSlicer" msgstr "Асоціювати файли DRC з OrcaSlicer" msgid "If enabled, sets OrcaSlicer as default application to open DRC files." msgstr "Якщо дозволено, зробити OrcaSlicer типовою програмою для відкривання файлів DRC." msgid "Associate STL files to OrcaSlicer" msgstr "Асоціювати файли .stl з OrcaSlicer" # AI Translated msgid "If enabled, this sets OrcaSlicer as the default application to open STL files." msgstr "Якщо ввімкнено, встановлює OrcaSlicer як програму за замовчуванням для відкриття файлів STL" msgid "Associate STEP files to OrcaSlicer" msgstr "Асоціювати файли .step/.stp з OrcaSlicer" # AI Translated msgid "If enabled, this sets OrcaSlicer as the default application to open STEP files." msgstr "Якщо ввімкнено, встановлює OrcaSlicer як програму за замовчуванням для відкриття файлів STEP" msgid "Associate web links to OrcaSlicer" msgstr "Асоціювати веб-посилання з OrcaSlicer" msgid "Developer" msgstr "Розробник" msgid "Skip AMS blacklist check" msgstr "Пропустити перевірку чорного списку AMS" msgid "Show unsupported presets" msgstr "Показати непідтримувані пресети" msgid "Show incompatible/unsupported presets in the printer and filament dropdown lists. These presets cannot be selected." msgstr "Показати несумісні/непідтримувані пресети у випадаючому списку принтера і філаменту. Ці пресети не можна вибрати." # AI Translated msgid "(Experimental) Use printer agents instead of print hosts" msgstr "(Експериментально) Використовувати агентів принтера замість хостів друку" # AI Translated msgid "" "Route print jobs for non-Bambu printers through printer plug-in agents instead of the classic print-host upload flow.\n" "When disabled, OrcaSlicer uses the legacy print-host behavior." msgstr "" "Спрямовує завдання друку для принтерів, відмінних від Bambu, через агентів плагінів принтера замість класичного завантаження на хост друку.\n" "Коли вимкнено, OrcaSlicer використовує попередню поведінку хоста друку." msgid "Experimental Features" msgstr "Експериментальні функції" msgid "Keep painted feature after mesh change" msgstr "Зберігати фарбування після зміни сітки" # AI Translated msgid "" "Attempt to keep painted features (color/seam/support/fuzzy etc.) after changing the object mesh (such as cut/reload from disk/simplify/fix etc.)\n" "Highly experimental! Slow and may create artifact." msgstr "" "Намагатися зберегти намальовані елементи (колір/шов/підтримки/шорсткість тощо) після зміни сітки обʼєкта (наприклад, розрізання/перезавантаження з диска/спрощення/виправлення тощо)\n" "Дуже експериментально! Повільно і може створювати артефакти." msgid "Allow Abnormal Storage" msgstr "Дозволити незвичне сховище" # AI Translated msgid "" "This allows the use of Storage that is marked as abnormal by the Printer.\n" "Use at your own risk, can cause issues!" msgstr "" "Це дозволяє використовувати сховище, позначене принтером як несправне.\n" "Використовуйте на власний ризик, це може спричинити проблеми!" msgid "Log Level" msgstr "Журнал рівня" msgid "fatal" msgstr "фатальний" msgid "error" msgstr "помилка" msgid "warning" msgstr "попередження" msgid "debug" msgstr "налагодження" msgid "trace" msgstr "слід" msgid "Debug" msgstr "Зневадження" msgid "Sync settings" msgstr "Налаштування синхронізації" msgid "User sync" msgstr "Синхронізація користувача" msgid "Preset sync" msgstr "Синхронізація профілів" msgid "Preferences sync" msgstr "Синхронізація налаштувань" msgid "Enable SSL(MQTT)" msgstr "Увімкнути SSL (MQTT)" msgid "Enable SSL(FTP)" msgstr "Увімкнути SSL(FTP)" msgid "Internal developer mode" msgstr "Внутрішній режим розробника" msgid "Host Setting" msgstr "Налаштування хоста" msgid "DEV host: api-dev.bambu-lab.com/v1" msgstr "Хост розробника: api-dev.bambu-lab.com/v1" msgid "QA host: api-qa.bambu-lab.com/v1" msgstr "Хост QA: api-qa.bambu-lab.com/v1" msgid "PRE host: api-pre.bambu-lab.com/v1" msgstr "Хост PRE: api-pre.bambu-lab.com/v1" msgid "Product host" msgstr "Хост продукту" msgid "Debug save button" msgstr "кнопка збереження налагодження" msgid "Save debug settings" msgstr "зберегти налаштування налагодження" msgid "Debug settings have been saved successfully!" msgstr "Налаштування налагодження успішно збережено!" # AI Translated msgid "Cloud environment switched; please login again!" msgstr "Хмарне середовище змінено, будь ласка, увійдіть знову!" msgid "System presets" msgstr "Системні профілі" msgid "User presets" msgstr "Профілі користувача" msgid "Incompatible presets" msgstr "Несумісні пресети" msgid "My Printer" msgstr "Мій принтер" msgid "AMS filaments" msgstr "Філаменти AMS" msgid "Left filaments" msgstr "Ліві філаменти" msgid "AMS filament" msgstr "Філамент AMS" msgid "Right filaments" msgstr "Праві філаменти" msgid "Click to select filament color" msgstr "Клацніть, щоб вибрати колір філаменту" msgid "Add/Remove presets" msgstr "Додати/вилучити пресети" msgid "Edit preset" msgstr "Змінити пресет" msgid "Change extruder color" msgstr "Змінити колір екструдера" msgid "Unspecified" msgstr "Не визначено" msgid "Project-inside presets" msgstr "Внутрішні пресети проекту" msgid "Bundle presets" msgstr "Набір пресетів" msgid "System" msgstr "Система" msgid "Unsupported presets" msgstr "Не підтримувані пресети" msgid "Unsupported" msgstr "Не підтримувані" msgid "Add/Remove filament" msgstr "Додати/вилучити філамент" msgid "Add/Remove materials" msgstr "Додати/вилучити матеріали" msgid "Select/Remove printers (system presets)" msgstr "Вибрати/вилучити принтери (системні пресети)" msgid "Create printer" msgstr "Створити принтер" msgid "Incompatible" msgstr "Несумісний" msgid "The selected preset is null!" msgstr "Обраний пресет є порожнім!" # AI Translated msgctxt "Layer range" msgid "End" msgstr "Кінець" msgid "Customize" msgstr "Пристосувати" msgid "Other layer filament sequence" msgstr "Послідовність філатури на інших шарах" msgid "Please input layer value (>= 2)." msgstr "Будь ласка, введіть значення шару (≥ 2)." msgid "Plate name" msgstr "Назва пластини" msgid "Same as Global Plate Type" msgstr "Так само, як Глобальний Тип Пластини" msgid "Bed type" msgstr "Тип столу" msgid "Same as Global Print Sequence" msgstr "Те ж, що й глобальна послідовність друку" msgid "Print sequence" msgstr "Послідовність друку" msgid "Same as Global" msgstr "Те саме, що й глобально" msgid "Disable" msgstr "Вимкнути" msgid "Spiral vase" msgstr "Спіральна ваза" msgid "First layer filament sequence" msgstr "Послідовність філаменту першого шару" # AI Translated msgid "The filament list contains mixed filaments. Custom filament sequence will not take effect." msgstr "Список філаментів містить змішані філаменти. Власна послідовність філаментів не діятиме." msgid "By Layer" msgstr "По шарах" msgid "By Object" msgstr "По обʼєктах" msgid "Accept" msgstr "Приймати" msgid "Log Out" msgstr "Вийти" # AI Translated msgid "Slice all plates to obtain time and filament estimation" msgstr "Наріжте всі пластини, щоб отримати оцінку часу та витрати філаменту" msgid "Packing project data into 3MF file" msgstr "Упаковка даних проекту у файл 3mf" msgid "Uploading 3MF" msgstr "Завантаження 3mf" msgid "Jump to model publish web page" msgstr "Перейти на веб-сторінку публікації моделі" msgid "Note: The preparation may take several minutes. Please be patient." msgstr "Примітка. Підготовка може тривати кілька хвилин. Будь ласка, будьте терплячі." msgid "Publish was canceled" msgstr "Публікація скасована" msgid "Slicing Plate 1" msgstr "Пластина для нарізки 1" msgid "Packing data to 3MF" msgstr "Упаковка даних у 3mf" msgid "Uploading data" msgstr "Відвантаження даних" msgid "Jump to webpage" msgstr "Перейти на вебсторінку" msgid "Material" msgstr "" msgid "Mixed filament" msgstr "" msgid "Some mixed filaments rely on filaments that will not be published:" msgstr "" #, c-format, boost-format msgid "Filament %d (mixed)" msgstr "" msgid "needs" msgstr "" msgid "not enabled" msgstr "" msgid "material not published" msgstr "" msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement." msgstr "" msgid "Publish anyway" msgstr "" msgid "Publish 3MF..." msgstr "" msgid "Select which settings to be published in the 3MF file" msgstr "" msgid "Publish 3MF Wiki" msgstr "" msgid "Publish 3MF Video Guide" msgstr "" msgid "Mixed filament - published as a whole when \"Enable\" above is selected" msgstr "" msgid "Publish this mixed filament and enable + Full Publish its component filaments" msgstr "" msgid "Publish this filament slot in the 3MF file" msgstr "" msgid "Full Publish" msgstr "" msgid "Embed the entire filament of this slot in the 3MF file" msgstr "" msgid "Filter non-selected" msgstr "" #, c-format, boost-format msgid "Save %s as" msgstr "Зберегти %s як" msgid "User Preset" msgstr "Пресети користувача" msgid "Preset Inside Project" msgstr "Налаштування проекту всередині" # AI Translated msgid "Copies all inherited values from the parent into this preset and removes the parent relationship. Presets compatible only with the parent may become unsupported." msgstr "Копіює в цей пресет усі значення, успадковані від батьківського пресета, і видаляє звʼязок успадкування. Пресети, сумісні лише з батьківським, можуть стати непідтримуваними." # AI Translated msgid "Detach from parent" msgstr "Відʼєднати від батьківського" # AI Translated msgid "Unique preset" msgstr "Незалежний пресет" # AI Translated msgid "Parent preset" msgstr "Батьківський пресет" # AI Translated msgid "This preset does not inherit from another preset." msgstr "Цей пресет не успадковується від іншого пресета." msgid "Name is unavailable." msgstr "Назва недоступна." msgid "Overwriting a system profile is not allowed." msgstr "Перезаписування системного профілю заборонено" #, boost-format msgid "Preset \"%1%\" already exists." msgstr "Предустановка \\%1%\\ вже існує." #, boost-format msgid "Preset \"%1%\" already exists and is incompatible with the current printer." msgstr "Предустановка \\%1%\\ вже існує і несумісна з поточним принтером." msgid "Please note that saving will overwrite the current preset." msgstr "Зверніть увагу, що дія збереження замінить цей пресет" msgid "The name cannot be the same as a preset alias name." msgstr "Назва не може збігатися зі встановленим псевдонімом." msgid "Save preset" msgstr "Зберегти пресет" msgctxt "PresetName" msgid "Copy" msgstr "Копіювати" #, boost-format msgid "Printer \"%1%\" is selected with preset \"%2%\"" msgstr "Принтер \"%1%\" вибраний з попередньо інсталяцією \"%2%\"" #, boost-format msgid "Please choose an action with \"%1%\" preset after saving." msgstr "Після збереження виберіть дію з пресетом \"%1%\"." #, boost-format msgid "For \"%1%\", change \"%2%\" to \"%3%\" " msgstr "Для \"%1%\" змініть \"%2%\" на \"%3%\" " #, boost-format msgid "For \"%1%\", add \"%2%\" as a new preset" msgstr "Для \"%1%\" додайте \"%2%\" як новий пресет" #, boost-format msgid "Simply switch to \"%1%\"" msgstr "Просто перейдіть на \"%1%\"" msgid "Task canceled" msgstr "Завдання скасовано" msgid "Bambu Cool Plate" msgstr "Bambu Холодна Пластина" msgid "PLA Plate" msgstr "PLA Пластина" msgid "Bambu Engineering Plate" msgstr "Bambu Інженерна Пластина" msgid "Bambu Smooth PEI Plate" msgstr "Bambu Гладка PEI Пластина" msgid "High temperature Plate" msgstr "Високотемпературна Пластина" msgid "Bambu Textured PEI Plate" msgstr "Bambu Текстурована PEI пластина" msgid "Bambu Cool Plate SuperTack" msgstr "Bambu Cool Plate SuperTack" msgid "Send print job" msgstr "Надіслати завдання друку" # AI Translated msgid "Not satisfied with the grouping of filaments? Regroup and slice ->" msgstr "Не задоволені групуванням філаментів? Перегрупувати та нарізати ->" # AI Translated msgid "Manually change external spool during printing for multi-color printing" msgstr "Вручну змінювати зовнішню котушку під час друку для багатоколірного друку" # AI Translated msgid "Multi-color with external" msgstr "Багатоколірний із зовнішньою котушкою" # AI Translated msgid "Your filament grouping method in the sliced file is not optimal." msgstr "Ваш метод групування філаментів у нарізаному файлі не є оптимальним." # AI Translated msgid "To ensure print quality, the drying temperature will be lowered during printing." msgstr "Щоб забезпечити якість друку, температуру сушіння буде знижено під час друку." # AI Translated msgid "Select timelapse storage location" msgstr "Виберіть місце зберігання таймлапсу" msgid "Auto Bed Leveling" msgstr "Авто-вирівнювання столу" # AI Translated msgid "" "This checks the flatness of heatbed. Leveling makes extruded height uniform.\n" "*Automatic mode: Run a leveling check(about 10 seconds). Skip if surface is fine." msgstr "" "Це перевіряє рівність столу. Вирівнювання забезпечує однакову висоту екструзії.\n" "*Автоматичний режим: виконати перевірку вирівнювання (близько 10 секунд). Пропустити, якщо поверхня в нормі." msgid "Flow Dynamics Calibration" msgstr "Калібрування динаміки потоку" # AI Translated msgid "" "This process determines the dynamic flow values to improve overall print quality.\n" "*Automatic mode: Skip if the filament was calibrated recently." msgstr "" "Цей процес визначає значення динамічного потоку для покращення загальної якості друку.\n" "*Автоматичний режим: пропустити, якщо філамент нещодавно калібрувався." # AI Translated msgid "Nozzle Offset Calibration" msgstr "Калібрування зміщення сопла" # AI Translated msgid "" "Calibrate nozzle offsets to enhance print quality.\n" "*Automatic mode: Check for calibration before printing. Skip if unnecessary." msgstr "" "Калібруйте зміщення сопел, щоб покращити якість друку.\n" "*Автоматичний режим: перевіряти калібрування перед друком. Пропустити, якщо не потрібно." # AI Translated msgid "Shared PA Profile" msgstr "Спільний профіль PA" # AI Translated msgid "Nozzles and filaments of the same type share the same PA profile." msgstr "Сопла та філаменти одного типу використовують спільний профіль PA." msgid "Send complete" msgstr "Надсилання завершено" msgid "Error code" msgstr "Код помилки" msgid "Error desc" msgstr "Опис помилки" msgid "Extra info" msgstr "Додаткова інформація" # AI Translated msgid "The Filament Track Switch installed on the printer does not match the slicing file. Please re-slice to avoid print quality issues." msgstr "Filament Track Switch, встановлений на принтері, не відповідає файлу нарізки. Виконайте повторну нарізку, щоб уникнути проблем з якістю друку." # AI Translated msgid "This print requires a Filament Track Switch. Please install it first." msgstr "Для цього друку потрібен Filament Track Switch. Спершу встановіть його." # AI Translated msgid "The Filament Track Switch has not been setup. Please setup it first." msgstr "Filament Track Switch не налаштовано. Спершу налаштуйте його." # AI Translated #, c-format, boost-format msgid "Failed to send nozzle auto-mapping request to printer { code: %d }. Please try to refresh the printer information. If it still does not recover, you can try to rebind the printer and check the network connection." msgstr "Не вдалося надіслати принтеру запит на автоматичне зіставлення сопел { code: %d }. Спробуйте оновити інформацію про принтер. Якщо це не допомогло, спробуйте повторно прив'язати принтер і перевірте мережеве зʼєднання." # AI Translated msgid "The printer is calculating nozzle mapping." msgstr "Принтер обчислює зіставлення сопел." msgid "Please wait a moment..." msgstr "Будь ласка, зачекайте хвилинку..." # AI Translated #, c-format, boost-format msgid "Failed to receive nozzle auto-mapping table from printer { msg: %s }. Please refresh the printer information." msgstr "Не вдалося отримати від принтера таблицю автоматичного зіставлення сопел { msg: %s }. Оновіть інформацію про принтер." # AI Translated #, c-format, boost-format msgid "The printer failed to build the nozzle auto-mapping table { code: %d }. Please refresh nozzle information." msgstr "Принтеру не вдалося побудувати таблицю автоматичного зіставлення сопел { code: %d }. Оновіть інформацію про сопла." # AI Translated #, c-format, boost-format msgid "The current nozzle mapping may produce an extra %0.2f g of waste." msgstr "Поточне зіставлення сопел може призвести до додаткових %0.2f г відходів." # AI Translated #, c-format, boost-format msgid "Recommended filament arrangement saves %s->" msgstr "Рекомендоване розташування філаментів заощаджує %s->" #, c-format, boost-format msgid "Filament %s does not match the filament in AMS slot %s. Please update the printer firmware to support AMS slot assignment." msgstr "Філамент %s не відповідає філаменту в слоті AMS %s. Будь ласка, оновіть прошивку принтера для підтримки перепризначення слотів AMS." msgid "Filament does not match the filament in AMS slot. Please update the printer firmware to support AMS slot assignment." msgstr "Філамент не відповідає філаменту в слоті AMS. Будь ласка, оновіть Прошивка принтера для підтримки призначення слотів AMS." # AI Translated #, c-format, boost-format msgid "The selected printer (%s) is incompatible with the print file configuration (%s). Please adjust the printer preset in the prepare page or choose a compatible printer on this page." msgstr "Вибраний принтер (%s) несумісний з конфігурацією файлу друку (%s). Скоригуйте пресет принтера на сторінці підготовки або виберіть сумісний принтер на цій сторінці." msgid "When spiral vase mode is enabled, machines with I3 structure will not generate timelapse videos." msgstr "При увімкненні режиму спіралі для вази машини з I3 структурою не будуть створювати відео в режимі таймлапсу." # AI Translated msgid "The current printer does not support timelapse in Traditional Mode when printing By-Object." msgstr "Поточний принтер не підтримує таймлапс у традиційному режимі під час друку по обʼєктах." # AI Translated msgid "I have checked the installed nozzle and want to print anyway." msgstr "Я перевірив встановлене сопло і все одно хочу друкувати." msgid "Errors" msgstr "Помилки" # AI Translated msgid "More than one filament types have been mapped to the same external spool, which may cause printing issues. The printer won't pause during printing." msgstr "До однієї зовнішньої котушки зіставлено більше одного типу філаменту, що може спричинити проблеми з друком. Принтер не робитиме паузу під час друку." # AI Translated msgid "The filament type setting of external spool is different from the filament in the slicing file." msgstr "Налаштування типу філаменту зовнішньої котушки відрізняється від філаменту у файлі нарізки." msgid "The printer type selected when generating G-code is not consistent with the currently selected printer. It is recommended that you use the same printer type for slicing." msgstr "Тип принтера, вибраний під час створення G-коду, не відповідає поточному Вибраному принтеру. Рекомендується використовувати той самий тип принтера для нарізки." # AI Translated msgid "There are some unknown filaments in the AMS mappings. Please check whether they are the required filaments. If they are okay, click \"Confirm\" to start printing." msgstr "У зіставленні AMS є кілька невідомих філаментів. Будь ласка, перевірте, чи це саме потрібні філаменти. Якщо все гаразд, натисніть «Підтвердити», щоб почати друк." msgid "Please check the following:" msgstr "Будь ласка, перевірте таке:" msgid "Please fix the error above, otherwise printing cannot continue." msgstr "Будь ласка, виправте помилку вище, інакше друк не може продовжитися." msgid "Please click the confirm button if you still want to proceed with printing." msgstr "Натисніть кнопку підтвердження, якщо ви все ще хочете продовжити друк." # AI Translated msgid "This checks the flatness of heatbed. Leveling makes extruded height uniform." msgstr "Це перевіряє рівність столу. Вирівнювання забезпечує однакову висоту екструзії." # AI Translated msgid "This process determines the dynamic flow values to improve overall print quality." msgstr "Цей процес визначає значення динамічного потоку для покращення загальної якості друку." msgid "Internal" msgstr "Внутрішні" # AI Translated #, c-format, boost-format msgid "%s space less than 20MB. Timelapse may not save properly. You can turn it off or" msgstr "На %s менше ніж 20 МБ вільного місця. Таймлапс може зберегтися некоректно. Ви можете вимкнути його або" # AI Translated msgid "Clean up files" msgstr "Очистити файли" # AI Translated msgid "Low internal storage. This timelapse will overwrite the oldest video files." msgstr "Мало внутрішньої памʼяті. Цей таймлапс перезапише найстаріші відеофайли." # AI Translated msgid "Low external storage. This timelapse will overwrite the oldest video files." msgstr "Мало зовнішньої памʼяті. Цей таймлапс перезапише найстаріші відеофайли." # AI Translated msgid "Insufficient external storage for time-lapse photography. Connect to computer to delete files, or use a larger memory card." msgstr "Недостатньо зовнішнього сховища для таймлапс-зйомки. Підключіться до компʼютера, щоб видалити файли, або скористайтеся картою памʼяті більшої ємності." # AI Translated msgid "Storage Space Not Enough" msgstr "Недостатньо місця у сховищі" # AI Translated msgid "Confirm & Print" msgstr "Підтвердити та друкувати" # AI Translated msgid "Cancel Timelapse & Print" msgstr "Скасувати таймлапс і друкувати" # AI Translated msgid "Clean Up" msgstr "Очистити" msgid "Preparing print job" msgstr "Підготовка завдання для друку" msgid "The name length exceeds the limit." msgstr "Довжина імені перевищує обмеження." # AI Translated #, c-format, boost-format msgid "Cost %dg filament and %d changes more than optimal grouping." msgstr "Витрачає на %dг філаменту та на %d змін більше, ніж оптимальне групування." msgid "nozzle" msgstr "сопло" #, c-format, boost-format msgid "Refreshing information of hotends(%d/%d)." msgstr "Оновлення інформації про хотенди (%d/%d)." # AI Translated msgid "There are not enough available hotends currently." msgstr "Наразі немає достатньої кількості доступних хотендів." # AI Translated msgid "Please complete the hotend rack setup and try again." msgstr "Завершіть налаштування стійки хотендів і спробуйте ще раз." msgid "Please refresh the nozzle information and try again." msgstr "Будь ласка, оновіть інформацію про сопло і спробуйте ще раз." msgid "Please re-slice to avoid filament waste." msgstr "Будь ласка, перенаріжте, щоб уникнути витрати філаменту." msgid "The reported hotend information may be unreliable." msgstr "Повідомлена інформація про хотенд може бути не достовірною." #, c-format, boost-format msgid "The printer has no nozzle matching the slicing file (%s)." msgstr "Принтер не має відповідного сопла, як у файлі нарізки (%s)." # AI Translated msgid "Please install a matching nozzle in the hotend rack, or set the corresponding printer preset while slicing." msgstr "Встановіть відповідне сопло у стійку хотендів або задайте відповідний пресет принтера під час нарізки." # AI Translated msgid "The toolhead and hotend rack are full. Please remove at least one hotend before printing." msgstr "Головка та стійка хотендів заповнені. Вилучіть щонайменше один хотенд перед друком." # AI Translated #, c-format, boost-format msgid "The nozzle flow setting of %s(%s) doesn't match with the slicing file(%s). Please make sure the nozzle installed matches with settings in printer, then set the corresponding printer preset while slicing." msgstr "Налаштування потоку сопла %s(%s) не відповідає файлу нарізки(%s). Переконайтеся, що встановлене сопло відповідає налаштуванням у принтері, а потім задайте відповідний пресет принтера під час нарізки." # AI Translated msgid "Tips: If you changed your nozzle of your printer lately, please go to 'Device -> Printer parts' to change your nozzle setting." msgstr "Порада: якщо ви нещодавно змінили сопло принтера, перейдіть до 'Пристрій -> Деталі принтера', щоб змінити налаштування сопла." # AI Translated #, c-format, boost-format msgid "The %s diameter(%.1fmm) of current printer doesn't match with the slicing file (%.1fmm). Please make sure the nozzle installed matches with settings in printer, then set the corresponding printer preset when slicing." msgstr "Діаметр %s (%.1fмм) поточного принтера не відповідає файлу нарізки (%.1fмм). Переконайтеся, що встановлене сопло відповідає налаштуванням у принтері, а потім задайте відповідний пресет принтера під час нарізки." # AI Translated #, c-format, boost-format msgid "The current nozzle diameter (%.1fmm) doesn't match with the slicing file (%.1fmm). Please make sure the nozzle installed matches with settings in printer, then set the corresponding printer preset when slicing." msgstr "Поточний діаметр сопла (%.1fмм) не відповідає файлу нарізки (%.1fмм). Переконайтеся, що встановлене сопло відповідає налаштуванням у принтері, а потім задайте відповідний пресет принтера під час нарізки." msgid "both extruders" msgstr "обидва екструдери" # AI Translated #, c-format, boost-format msgid "The hardness of current material (%s) exceeds the hardness of %s(%s). Please verify the nozzle or material settings and try again." msgstr "Твердість поточного матеріалу (%s) перевищує твердість %s(%s). Перевірте налаштування сопла або матеріалу та спробуйте ще раз." # AI Translated msgid "Your current firmware version cannot start this print job. Please update to the latest version and try again." msgstr "Ваша поточна версія прошивки не може розпочати це завдання друку. Оновіть до останньої версії та спробуйте ще раз." # AI Translated #, c-format, boost-format msgid "The hardness of current material (%s) exceeds the hardness of %s(%s). It may cause nozzle wear, leading to material leakage and unstable flow. Please exercise caution when using it." msgstr "Твердість поточного матеріалу (%s) перевищує твердість %s(%s). Це може спричинити знос сопла, що призведе до витікання матеріалу та нестабільного потоку. Використовуйте з обережністю." # AI Translated msgid "Some filaments may switch between extruders during printing. Manual K-value calibration cannot be applied throughout the entire print, which may affect print quality. Enabling Flow Dynamics Calibration is recommended." msgstr "Деякі філаменти можуть перемикатися між екструдерами під час друку. Ручне калібрування значення K не може застосовуватися протягом усього друку, що може вплинути на його якість. Рекомендується увімкнути калібрування динаміки потоку." # AI Translated msgid "There is stringing-prone filament in this file. For best print quality, we recommend switching nozzle clumping detection to Auto mode." msgstr "У цьому файлі є філамент, схильний до утворення павутиння. Для найкращої якості друку рекомендуємо перемкнути виявлення налипання на сопло в автоматичний режим." # AI Translated msgid "If 'Dynamic Flow Calibration' is set to Auto/On, the system will use the manual calibration value or the default value and skip the flow calibration process. You can perform a manual flow calibration for TPU filament on the 'Calibration' page." msgstr "Якщо для «Калібрування динамічного потоку» встановлено Авто/Увімк., система використає значення ручного калібрування або типове значення й пропустить процес калібрування потоку. Ви можете виконати ручне калібрування потоку для філаменту TPU на сторінці «Калібрування»." #, c-format, boost-format msgid "[ %s ] requires printing in a high-temperature environment. Please close the door." msgstr "[ %s ] вимагає друку в середовищі з високою температурою. Будь ласка, закрийте дверці." #, c-format, boost-format msgid "[ %s ] requires printing in a high-temperature environment." msgstr "[ %s ] вимагає друку в середовищі з високою темературою." # AI Translated #, c-format, boost-format msgid "The filament on %s may soften. Please unload." msgstr "Філамент на %s може розмʼякнути. Вивантажте його." # AI Translated #, c-format, boost-format msgid "The filament on %s is unknown and may soften. Please set filament." msgstr "Філамент на %s невідомий і може розмʼякнути. Вкажіть філамент." # AI Translated msgid "Unable to automatically match to suitable filament. Please click to manually match." msgstr "Не вдалося автоматично підібрати відповідний філамент. Натисніть, щоб підібрати вручну." # AI Translated msgid "Install toolhead enhanced cooling fan to prevent filament softening." msgstr "Встановіть вентилятор посиленого охолодження головки, щоб запобігти розмʼякшенню філаменту." msgid "Smooth Cool Plate" msgstr "Гладка Холодна Пластина" msgid "Engineering Plate" msgstr "Інженерна Пластина" msgid "Smooth High Temp Plate" msgstr "Гладка Високотемпературна Пластина" msgid "Textured PEI Plate" msgstr "Текстурована PEI пластина" msgid "Cool Plate (SuperTack)" msgstr "Холодна пластина (SuperTack)" msgid "Click here if you can't connect to the printer" msgstr "Клацніть тут, якщо ви не можете підключитися до принтера" msgid "No login account, only printers in LAN mode are displayed." msgstr "Немає облікового запису для входу, відображаються лише принтери в режимі LAN" msgid "Connecting to server..." msgstr "Підключення до сервера" msgid "Synchronizing device information..." msgstr "Синхронізація інформації про пристрій" msgid "Synchronizing device information timed out." msgstr "Тайм-аут синхронізації інформації про пристрій" msgid "Cannot send a print job when the printer is not at FDM mode." msgstr "Не можливо надіслати завдання друку коли принтер не в режимі FDM." msgid "Cannot send a print job while the printer is updating firmware." msgstr "Неможливо надіслати завдання друку, коли принтер оновлює мікропрограму" msgid "The printer is executing instructions. Please restart printing after it ends." msgstr "Принтер виконує вказівки. Будь ласка, перезапустіть друк після неїзакінчення" # AI Translated msgid "AMS is setting up. Please try again later." msgstr "AMS налаштовується. Спробуйте пізніше." # AI Translated msgid "Not all filaments used in slicing are mapped to the printer. Please check the mapping of filaments." msgstr "Не всі філаменти, використані під час нарізки, зіставлено з принтером. Перевірте зіставлення філаментів." # AI Translated msgid "Please do not mix-use the Ext with AMS." msgstr "Не змішуйте зовнішню котушку (Ext) з AMS." # AI Translated msgid "Invalid nozzle information, please refresh or manually set nozzle information." msgstr "Некоректна інформація про сопло, оновіть або задайте інформацію про сопло вручну." msgid "Storage needs to be inserted before printing via LAN." msgstr "Перед друком через LAN потрібно вставити сховище." # AI Translated msgid "Storage is in abnormal state or is in read-only mode." msgstr "Сховище перебуває в нештатному стані або в режимі лише для читання." # AI Translated msgid "Storage needs to be inserted before printing." msgstr "Перед друком потрібно вставити сховище." msgid "Cannot send the print job to a printer whose firmware must be updated." msgstr "Неможливо надіслати завдання друку на принтер, прошивка якого повинна бути оновлено." msgid "Cannot send a print job for an empty plate." msgstr "Неможливо надіслати завдання на друк для порожньої форми" msgid "Storage needs to be inserted to record timelapse." msgstr "Для запису відрізків часу потрібно вставити сховище." # AI Translated msgid "You have selected both external and AMS filaments for an extruder. You will need to manually switch the external filament during printing." msgstr "Ви вибрали для екструдера і зовнішній філамент, і філамент з AMS. Вам доведеться вручну змінювати зовнішній філамент під час друку." # AI Translated msgid "TPU 90A/TPU 85A is too soft and does not support automatic Flow Dynamics calibration." msgstr "TPU 90A/TPU 85A занадто мʼякі й не підтримують автоматичне калібрування динаміки потоку." # AI Translated msgid "Set dynamic flow calibration to 'OFF' to enable custom dynamic flow value." msgstr "Встановіть калібрування динамічного потоку в положення «ВИМК.», щоб увімкнути власне значення динамічного потоку." msgid "This printer does not support printing all plates." msgstr "Цей принтер не підтримує друк усіх форм" # AI Translated #, c-format, boost-format msgid "The current firmware supports a maximum of %s materials. You can either reduce the number of materials to %s or fewer on the Preparation Page, or try updating the firmware. If you are still restricted after the update, please wait for subsequent firmware support." msgstr "Поточна прошивка підтримує щонайбільше %s матеріалів. Ви можете або зменшити кількість матеріалів до %s чи менше на сторінці підготовки, або спробувати оновити прошивку. Якщо після оновлення обмеження зберігається, зачекайте на подальшу підтримку в прошивці." # AI Translated msgid "The type of external filament is unknown or does not match with the filament type in the slicing file. Please make sure you have installed the correct filament in the external spool." msgstr "Тип зовнішнього філаменту невідомий або не відповідає типу філаменту у файлі нарізки. Переконайтеся, що ви встановили правильний філамент на зовнішню котушку." # AI Translated msgid "TPU 90A/TPU 85A are too soft. It is recommended to perform manual flow calibration on the 'Calibration' page. If 'Dynamic Flow Calibration' is set to auto/on, the system will use the previous calibration value and skip the flow calibration process." msgstr "TPU 90A/TPU 85A занадто мʼякі. Рекомендується виконати ручне калібрування потоку на сторінці «Калібрування». Якщо для «Калібрування динамічного потоку» встановлено авто/увімк., система використає попереднє значення калібрування та пропустить процес калібрування потоку." # AI Translated msgid "The filament in the AMS may be insufficient for this print. Please refill or replace it." msgstr "Філаменту в AMS може бути недостатньо для цього друку. Поповніть або замініть його." msgid "Current firmware does not support file transfer to internal storage." msgstr "Поточна прошивка не підтримує надсилання файлу до внутрішнього сховища." msgid "Send to Printer storage" msgstr "Надіслати до сховища принтера" msgid "Try to connect" msgstr "Спробувати підʼєднатися" msgid "Internal Storage" msgstr "Внутрішнє сховище" msgid "External Storage" msgstr "Зовнішнє сховище" msgid "Upload file timeout, please check if the firmware version supports it." msgstr "Час відвантаження файла минув, перевірте чи версія прошивки підтримує це." msgid "Connection timed out, please check your network." msgstr "Час зʼєднання вийшов, перевірте свою мережу." msgid "Connection failed. Click the icon to retry" msgstr "Не вдале зʼєднання. Клацніть на значок, щоб повторити." msgid "Cannot send print tasks when an update is in progress" msgstr "Не вдалося надіслати завдання на друк під час оновлення" msgid "The selected printer is incompatible with the chosen printer presets." msgstr "Вибраний принтер несумісний зі встановленими пресетами." msgid "Storage needs to be inserted before send to printer." msgstr "Перед надсиланням на принтер потрібно вставити сховище." msgid "The printer is required to be on the same LAN as Orca Slicer." msgstr "Принтер повинен бути підключений до тієї ж локальної мережі, що й Orca Slicer." msgid "The printer does not support sending to printer storage." msgstr "Принтер не підтримує надсилання до сховище принтера." msgid "Sending..." msgstr "Надсилання..." # AI Translated msgid "File upload timed out. Please check if the firmware version supports this operation or verify if the printer is functioning properly." msgstr "Час очікування завантаження файлу вичерпано. Перевірте, чи підтримує версія прошивки цю операцію, або переконайтеся, що принтер працює належним чином." msgid "Sending failed, please try again!" msgstr "Надсилання невдале, спробуйте ще раз!" # AI Translated msgid "Slice complete" msgstr "Нарізку завершено" msgid "View all Daily tips" msgstr "Переглянути всі щоденні поради" msgid "Failed to create socket" msgstr "Не вдалося створити сокет" msgid "Failed to connect socket" msgstr "Не вдалося підключити сокет" msgid "Failed to publish login request" msgstr "Не вдалося опублікувати запит на вхід" msgid "Timeout getting ticket from device" msgstr "Перевищено час очікування при отриманні квитка від пристрою" msgid "Timeout getting ticket from server" msgstr "Перевищено час очікування при отриманні квитка від сервера" msgid "Failed to post ticket to server" msgstr "Не вдалося відправити квиток на сервер" msgid "Failed to parse login report reason" msgstr "Не вдалося розібрати причину звіту про вхід" msgid "Receive login report timeout" msgstr "Отримано звіт про вхід з перевищеним часом очікування" msgid "Unknown Failure" msgstr "Невідомий збій" msgid "" "Please Find the Pin Code in Account page on printer screen,\n" " and type in the Pin Code below." msgstr "" "Будь ласка, знайдіть Пін-код на сторінці облікового запису на екрані принтера, \n" " і введіть Пін-код нижче." msgid "Can't find Pin Code?" msgstr "Не можу знайти Пін-код?" msgid "Pin Code" msgstr "Пін-код" msgid "Binding..." msgstr "Прив’язка…" msgid "Please confirm on the printer screen" msgstr "Будь ласка, підтвердьте на екрані принтера" msgid "Log in failed. Please check the Pin Code." msgstr "Вхід не вдається. Будь ласка, перевірте Пін-код." msgid "Log in printer" msgstr "Вхід до принтера" msgid "Would you like to log in to this printer with the current account?" msgstr "Ви хочете увійти до цього принтера з поточним обліковим записом?" msgid "Check the reason" msgstr "Перевірте причину" msgid "Read and accept" msgstr "Прочитайте і згодьтеся" msgid "Terms and Conditions" msgstr "Умови використання" msgid "Thank you for purchasing a Bambu Lab device. Before using your Bambu Lab device, please read the terms and conditions. By clicking to agree to use your Bambu Lab device, you agree to abide by the Privacy Policy and Terms of Use (collectively, the \"Terms\"). If you do not comply with or agree to the Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services." msgstr "Дякуємо за покупку пристрою Bambu Lab. Перед використанням вашого пристрою Bambu Lab, ознайомтеся з умовами та положеннями. Клацнувши, щоб погодитися використовувати ваш пристрій Bambu Lab, ви погоджуєтесь дотримуватися Політики конфіденційності та Умов використання (разом \"Умови\"). Якщо ви не виконуєте або не погоджуєтесь із Політикою конфіденційності Bambu Lab, будь ласка, не використовуйте обладнання та послуги Bambu Lab." msgid "and" msgstr "і" msgid "Privacy Policy" msgstr "Політика конфіденційності" msgid "We ask for your help to improve everyone's printer" msgstr "Ми просимо вашої допомоги для покращення роботи всіх принтерів" msgid "Statement about User Experience Improvement Program" msgstr "Заява про Програму покращення користувацького досвіду" #, c-format, boost-format msgid "In the 3D Printing community, we learn from each other's successes and failures to adjust our own slicing parameters and settings. %s follows the same principle and uses machine learning to improve its performance from the successes and failures of the vast number of prints by our users. We are training %s to be smarter by feeding them the real-world data. If you are willing, this service will access information from your error logs and usage logs, which may include information described in Privacy Policy. We will not collect any Personal Data by which an individual can be identified directly or indirectly, including without limitation names, addresses, payment information, or phone numbers. By enabling this service, you agree to these terms and the statement about Privacy Policy." msgstr "У спільноті 3D-друку ми навчаємося на прикладі успіхів і невдач інших, щоб налаштувати параметри і налаштування свого власного зрізування. %s дотримується того ж принципу і використовує машинне навчання для покращення своєї ефективності на основі успіхів і невдач великої кількості друків наших користувачів. Ми навчаємо %s бути розумнішими, подаючи їм дані з реального світу. Якщо ви готові, ця послуга буде мати доступ до інформації з вашого журналу помилок і журналу використання, включаючи інформацію, описану в Політиці конфіденційності. Ми не будемо збирати жодних Особистих даних, за якими можна ідентифікувати особу безпосередньо чи опосередковано, включаючи, але не обмежуючись, імена, адреси, інформацію про платежі або номери телефонів. Увімкнувши цю службу, ви погоджуєтеся з цими умовами та заявою про Політику конфіденційності." msgid "Statement on User Experience Improvement Plan" msgstr "Заява щодо Плану покращення користувацького досвіду" msgid "Log in successful." msgstr "Авторизація успішна." msgid "Log out printer" msgstr "Вийти з принтера" msgid "Would you like to log out the printer?" msgstr "Хочете вийти з принтера?" msgid "Please log in first." msgstr "Будь ласка, увійдіть спочатку." msgid "There was a problem connecting to the printer. Please try again." msgstr "Виникла проблема з підключенням до принтера. Будь ласка, спробуйте ще раз." msgid "Failed to log out." msgstr "Не вдалося вийти." #. TRN "Save current Settings" #, c-format, boost-format msgid "Save current %s" msgstr "Зберегти поточний %s" msgid "Delete this preset" msgstr "Видалити цей профіль" msgid "Search in preset" msgstr "Пошук у профілі" # AI Translated msgid "Synchronization of different extruder drives or nozzle volume types is not supported." msgstr "Синхронізація різних приводів екструдера або типів обʼєму сопла не підтримується." # AI Translated msgid "Synchronize the modification of parameters to the corresponding parameters of another extruder." msgstr "Синхронізувати зміну параметрів з відповідними параметрами іншого екструдера." msgid "Click to reset all settings to the last saved preset." msgstr "Натисніть, щоб скинути всі налаштування до останнього збереженого пресету." # AI Translated msgid "Prime tower is required for nozzle changing. There may be flaws on the model without prime tower. Are you sure you want to disable prime tower?" msgstr "Для зміни сопла потрібна підготовча вежа. Без підготовчої вежі на моделі можуть зʼявитися дефекти. Ви впевнені, що хочете вимкнути підготовчу вежу?" msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without a prime tower. Are you sure you want to disable the prime tower?" msgstr "Для плавного таймлапсу потребується Підготовча вежа. Без Підготовчої вежі на моделі можуть виникати дефекти. Ви впевнені, що хочете вимкнути Підготовчу вежу?" # AI Translated msgid "A prime tower is required for clumping detection. There may be flaws on the model without prime tower. Are you sure you want to disable prime tower?" msgstr "Для виявлення налипання потрібна підготовча вежа. Без підготовчої вежі на моделі можуть зʼявитися дефекти. Ви впевнені, що хочете вимкнути підготовчу вежу?" # AI Translated msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable?" msgstr "Одночасне увімкнення точної висоти Z та підготовчої вежі може спричинити помилки нарізки. Ви все одно хочете увімкнути?" # AI Translated msgid "A prime tower is required for clumping detection. There may be flaws on the model without prime tower. Do you still want to enable clumping detection?" msgstr "Для виявлення налипання потрібна підготовча вежа. Без підготовчої вежі на моделі можуть зʼявитися дефекти. Ви все одно хочете увімкнути виявлення налипання?" # AI Translated msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?" msgstr "Одночасне увімкнення точної висоти Z та підготовчої вежі може спричинити помилки нарізки. Ви все одно хочете увімкнути точну висоту Z?" # AI Translated msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?" msgstr "Для плавного таймлапсу потрібна підготовча вежа. Без підготовчої вежі на моделі можуть виникати дефекти. Ви хочете увімкнути підготовчу вежу?" msgid "Still print by object?" msgstr "Все одно друкувати кожен обʼєкт окремо?" # AI Translated msgid "" "Non-soluble support materials are not recommended for support base.\n" "Are you sure to use them for support base?\n" msgstr "" "Нерозчинні матеріали підтримок не рекомендуються для основи підтримок.\n" "Ви впевнені, що хочете використати їх для основи підтримок?\n" msgid "" "When using support material for the support interface, we recommend the following settings:\n" "0 top Z distance, 0 interface spacing, interlaced rectilinear pattern and disable independent support layer height." msgstr "" "При використанні матеріалу підтримки для інтерфейсу підтримки ми рекомендуємо наступні налаштування:\n" "0 відстань верхнього шару Z, 0 відстань між інтерфейсами, перемежований прямокутний візерунок та вимкнена незалежна висота шару підтримки." msgid "" "Change these settings automatically?\n" "Yes - Change these settings automatically.\n" "No - Do not change these settings for me." msgstr "" "Змінити ці налаштування автоматично?\n" "Так - Змінити ці налаштування автоматично\n" "Ні - Не змінювати ці настройки для мене" # AI Translated msgid "" "When using soluble material for the support interface, we recommend the following settings:\n" "0 top Z distance, 0 interface spacing, interlaced rectilinear pattern, disable independent support layer height\n" "and use soluble materials for both support interface and support base." msgstr "" "Використовуючи розчинний матеріал для інтерфейсу підтримок, ми рекомендуємо такі налаштування:\n" "0 верхній Z-зазор, 0 інтервал інтерфейсу, чергований прямолінійний шаблон, вимкнена незалежна висота шару підтримок,\n" "а також розчинні матеріали і для інтерфейсу, і для основи підтримок." msgid "Enabling this option will modify the model's shape. If your print requires precise dimensions or is part of an assembly, it's important to double-check whether this change in geometry impacts the functionality of your print." msgstr "Увімкнення цієї опції змінить форму моделі. Якщо ваш друк вимагає точних розмірів або є частиною збірки, важливо перевірити, чи не вплине зміна геометрії на функціональність вашого друку." msgid "Are you sure you want to enable this option?" msgstr "Ви впевнені, що хочете ввімкнути цю опцію?" # AI Translated msgid "Infill patterns are typically designed to handle rotation automatically to ensure proper printing and achieve their intended effects (e.g., Gyroid, Cubic). Rotating the current sparse infill pattern may lead to insufficient support. Please proceed with caution and thoroughly check for any potential printing issues. Are you sure you want to enable this option?" msgstr "Шаблони заповнення зазвичай розроблені так, щоб автоматично враховувати обертання, забезпечувати належний друк і досягати задуманого ефекту (наприклад, Гіроїд, Кубічний). Обертання поточного шаблону часткового заповнення може призвести до недостатньої підтримки. Дійте обережно та ретельно перевіряйте можливі проблеми друку. Ви впевнені, що хочете увімкнути цю опцію?" msgid "Experimental feature: Retracting and cutting off the filament at a greater distance during filament changes to minimize flush. Although it can notably reduce flush, it may also elevate the risk of nozzle clogs or other printing complications." msgstr "Експериментальна функція: Втягування та відрізання філаменту на більшій відстані під час зміни філаменту для мінімізації промивання. Хоча це може помітно зменшити промивання, це також може підвищити ризик засмічення сопла або інших ускладнень друку." msgid "Experimental feature: Retracting and cutting off the filament at a greater distance during filament changes to minimize flush. Although it can notably reduce flush, it may also elevate the risk of nozzle clogs or other printing complications. Please use with the latest printer firmware." msgstr "Експериментальна функція: Втягування та відрізання філаменту на більшій відстані під час зміни філаменту для мінімізації промивання. Хоча це може помітно зменшити промивання, це також може підвищити ризик засмічення сопла або інших ускладнень друку. Будь ласка, використовуйте з останніми прошивками принтера." msgid "" "When recording timelapse without toolhead, it is recommended to add a \"Timelapse Wipe Tower\" \n" "by right-click the empty position of build plate and choose \"Add Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" "При записі таймлапсу без інструментальної головки рекомендується додати “Timelapse Wipe Tower” \n" "Клацніть правою кнопкою миші на порожній позиції монтажної плити та виберіть \"Додати Примітів\"->\"Timelapse Wipe Tower\"." msgid "A copy of the current system preset will be created, which will be detached from the system preset." msgstr "Буде створено копію поточного системного пресету, який буде від'єднано від системного пресету." msgid "The current custom preset will be detached from the parent system preset." msgstr "Поточний власний пресет буде відʼєднаний від батьківського системного пресету." msgid "Modifications to the current profile will be saved." msgstr "Зміни до поточного профілю буде збережено." msgid "" "This action is not revertible.\n" "Do you want to proceed?" msgstr "" "Цю дію неможливо відмінити.\n" "Хочете продовжити?" msgid "Detach preset" msgstr "Відʼєднати пресет" msgid "This is a default preset." msgstr "Це типовий пресет." msgid "This is a system preset." msgstr "Це системний пресет." msgid "Current preset is inherited from the default preset." msgstr "Поточний пресет успадковується від пресету за замовчуванням." msgid "Current preset is inherited from" msgstr "Поточний пресет успадковується від" msgid "It can't be deleted or modified." msgstr "Його не можна видалити або змінити." msgid "Any modifications should be saved as a new preset inherited from this one." msgstr "Будь-які модифікації слід зберігати як новий пресет, успадкований від цього." msgid "To do that please specify a new name for the preset." msgstr "Для цього вкажіть нову назву пресету." msgid "Additional information:" msgstr "Додаткова інформація:" msgid "vendor" msgstr "виробник" msgid "printer model" msgstr "модель принтеру" msgid "default print profile" msgstr "типовий профіль друку" msgid "default filament profile" msgstr "типовий профіль філаметну" msgid "default SLA material profile" msgstr "типовий профіль SLA-матеріалу" msgid "default SLA print profile" msgstr "типовий профіль SLA-друку" msgid "full profile name" msgstr "повне назва профілю" msgid "symbolic profile name" msgstr "символічна назва профілю" msgid "Line width" msgstr "Ширина лінії" msgid "Precision" msgstr "Точність" # AI Translated msgid "Z contouring" msgstr "Контурування по Z" msgid "Wall generator" msgstr "Генерація стінок" msgid "Walls and surfaces" msgstr "Стінки та поверхні" msgid "Bridging" msgstr "Створення мостів" msgid "Walls" msgstr "Стінки" msgid "Top/bottom shells" msgstr "Верхня/нижня оболонка" msgid "First layer speed" msgstr "Швидкість першого шару" msgid "Other layers speed" msgstr "Швидкість інших шарів" msgid "Overhang speed" msgstr "Швидкість нависань" msgid "This is the speed for various overhang degrees. Overhang degrees are expressed as a percentage of line width. 0 speed means no slowing down for the overhang degree range and wall speed is used" msgstr "Це швидкість для різних градусів нависання. Ступені нависання виражається у відсотках від ширини лінії. 0 швидкість означає відсутність уповільнення для діапазону ступенів нависання і використовується швидкість друку стінок" msgid "Set speed for external and internal bridges" msgstr "Встановіть швидкість для зовнішніх та внутрішніх мостів" msgid "Travel speed" msgstr "Швидкість переміщення" msgid "Junction Deviation" msgstr "Junction Deviation" msgid "Jerk(XY)" msgstr "Ривок (XY)" msgid "Raft" msgstr "Підкладка" msgid "Filament for Supports" msgstr "Філамент підтримки" msgid "Support ironing" msgstr "Підтримка розгладжування" msgid "Tree supports" msgstr "Органічні підтримки" msgid "Multimaterial" msgstr "Мультиматеріал" msgid "Filament for Features" msgstr "Філамент для ознак" msgid "Ooze prevention" msgstr "Запобігання просочування" msgid "Special mode" msgstr "Спеціальний режим" msgid "G-code output" msgstr "Вихідний G-код" msgid "Change extrusion role G-code" msgstr "Змінити роль екструзії G-код" msgid "Post-processing Scripts" msgstr "Сценарії постобробки" # AI Translated msgid "Slicing Pipeline Plugin" msgstr "Плагін конвеєра нарізки" # AI Translated msgid "Plugin Configuration" msgstr "Конфігурація плагіна" msgid "Notes" msgstr "Примітки" msgid "Frequent" msgstr "Частий" # AI Translated #, c-format, boost-format msgid "" "Following line %s contains reserved keywords.\n" "Please remove it, or G-code visualization and print time estimation will be broken." msgid_plural "" "Following lines %s contain reserved keywords.\n" "Please remove them, or G-code visualization and print time estimation will be broken." msgstr[0] "" "Наступний рядок %s містить зарезервовані ключові слова.\n" "Видаліть його або виконайте візуалізацію G-коду та оцінку часу друку." msgstr[1] "" "Наступні рядки %s містять зарезервовані ключові слова.\n" "Видаліть їх або виконайте візуалізацію G-коду та оцінку часу друку." msgstr[2] "" "Наступні рядки %s містять зарезервовані ключові слова.\n" "Видаліть їх або виконайте візуалізацію G-коду та оцінку часу друку." msgstr[3] "" "Наступні рядки %s містять зарезервовані ключові слова.\n" "Видаліть їх або виконайте візуалізацію G-коду та оцінку часу друку." msgid "Reserved keywords found" msgstr "Знайдено зарезервовані ключові слова" msgid "Setting Overrides" msgstr "Налаштування перевизначень" msgid "Retraction when switching material" msgstr "Втягування під час зміни матеріалу" msgid "Basic information" msgstr "Базова інформація" msgid "Recommended nozzle temperature" msgstr "Рекомендована температура сопла" msgid "Recommended nozzle temperature range of this filament. 0 means not set" msgstr "Рекомендований діапазон температур сопла для цього філаменту. 0 означає відсутність установки" msgid "Flow ratio and Pressure Advance" msgstr "Коефіцієнт потоку та Випередження тиску" msgid "Print chamber temperature" msgstr "Температура в камері друку" msgid "Chamber temperature" msgstr "Температура в камері" # AI Translated msgid "Target chamber temperature, and the minimal chamber temperature at which printing should start" msgstr "Цільова температура камери та мінімальна температура камери, за якої має початися друк" # AI Translated msgid "Target" msgstr "Цільова" # AI Translated msgid "Minimal" msgstr "Мінімальна" msgid "Print temperature" msgstr "Температура друку" msgid "Nozzle temperature when printing" msgstr "Температура сопла під час друку" # AI Translated msgid "Bed temperature when the Cool Plate SuperTack is installed. A value of 0 means the filament does not support printing on the Cool Plate SuperTack." msgstr "Температура столу, коли встановлено Cool Plate SuperTack. Значення 0 означає, що філамент не підтримує друк на Cool Plate SuperTack." msgid "Cool Plate" msgstr "Холодна пластина" # AI Translated msgid "This is the bed temperature when the Cool Plate is installed. A value of 0 means the filament does not support printing on the Cool Plate." msgstr "Температура столу при встановленій Холодній пластині. Значення 0 означає, що філамент не підтримує друк на Холодній пластині." msgid "Textured Cool Plate" msgstr "Текстурована Холодна Пластина" # AI Translated msgid "This is the bed temperature when the Textured Cool Plate is installed. A value of 0 means the filament does not support printing on the Textured Cool Plate." msgstr "Температура столу при встановленій Текстурованій холодній пластині. Значення 0 означає, що філамент не підтримує друк на Текстурованій холодній пластині." # AI Translated msgid "This is the bed temperature when the engineering plate is installed. A value of 0 means the filament does not support printing on the Engineering Plate." msgstr "Температура столу при встановленій Інженерній пластині. Значення 0 означає, що філамент не підтримує друк на Інженерній пластині." msgid "Smooth PEI Plate / High Temp Plate" msgstr "Гладка ПЕІ пластина / Високотемпературна пластина" msgid "This is the bed temperature when the Smooth PEI Plate/High Temperature Plate is installed. A value of 0 means the filament does not support printing on the Smooth PEI Plate/High Temp Plate." msgstr "Температура столу, коли встановлена Гладка ПЕІ пластина / Високотемпературна пластина. Значення 0 означає, що філамент не підтримує друк на Гладкій ПЕІ пластині / Високотемпературній пластині" # AI Translated msgid "This is the bed temperature when the Textured PEI Plate is installed. A value of 0 means the filament does not support printing on the Textured PEI Plate." msgstr "Температура столу при встановленій Текстурованій PEI пластині. Значення 0 означає, що філамент не підтримує друк на Текстурованій PEI пластині." msgid "Volumetric speed limitation" msgstr "Обʼємне обмеження швидкості" msgid "Cooling for specific layer" msgstr "Охолодження для конкретного шару" msgid "Part cooling fan" msgstr "Вентилятор охолодження деталей" msgid "Min fan speed threshold" msgstr "Поріг мінімальної швидкості вентилятора" # AI Translated msgid "The part cooling fan will run at the minimum fan speed when the estimated layer time is longer than the threshold value. When the layer time is shorter than the threshold, the fan speed will be interpolated between the minimum and maximum fan speed according to layer printing time." msgstr "Вентилятор охолодження деталей працюватиме на мінімальній швидкості, коли розрахунковий час шару довший за порогове значення. Коли час шару менший за поріг, швидкість вентилятора інтерполюється між мінімальною та максимальною швидкістю відповідно до часу друку шару." msgid "Max fan speed threshold" msgstr "Поріг максимальної швидкості вентилятора" # AI Translated msgid "The part cooling fan will run at maximum speed when the estimated layer time is shorter than the threshold value." msgstr "Вентилятор охолодження деталей працюватиме на максимальній швидкості, коли розрахунковий час шару менший за порогове значення." msgid "Auxiliary part cooling fan" msgstr "Вентилятор охолодження допоміжних деталей" msgid "Exhaust fan" msgstr "Витяжний вентилятор" msgid "During print" msgstr "Під час друку" msgid "Complete print" msgstr "Завершити друк" msgid "Filament start G-code" msgstr "G-код початку філаменту" msgid "Filament end G-code" msgstr "G-код кінця філаменту" msgid "Wipe tower parameters" msgstr "Параметри вежі протирання" # AI Translated msgid "Multi Filament" msgstr "Кілька філаментів" msgid "Tool change parameters with single extruder MM printers" msgstr "Параметри зміни інструменту в одно-екструдерному ММ-принтері" msgid "Set" msgstr "Вибір" msgid "Tool change parameters with multi extruder MM printers" msgstr "Параметри заміни інструменту в багатоекструдерних MM-принтерах" msgid "Dependencies" msgstr "Залежності" msgid "Compatible printers" msgstr "Сумісні принтери" msgid "Compatible process profiles" msgstr "Сумісні профілі процесів" msgid "Printable space" msgstr "Місце для друку" msgid "Printer Agent" msgstr "Агент принтера" # AI Translated msgid "Select the network agent implementation for printer communication. Available agents are registered at startup." msgstr "Виберіть реалізацію мережевого агента для звʼязку з принтером. Доступні агенти реєструються під час запуску." #. TRN: The first argument is the parameter's name; the second argument is its value. #, boost-format msgid "Invalid value provided for parameter %1%: %2%" msgstr "Надано некоректне значення для параметру %1%: %2%" msgid "G-code flavor is switched" msgstr "Варіацію G-коду змінено" msgid "Cooling Fan" msgstr "Охолоджуючий вентилятор" msgid "Fan speed-up time" msgstr "Час розгону вентилятора" msgid "Extruder Clearance" msgstr "Очищення екструдера" msgid "Adaptive bed mesh" msgstr "Адаптивна сітка стола" msgid "Accessory" msgstr "Аксесуари" msgid "Machine G-code" msgstr "G-код машини" msgid "File header G-code" msgstr "G-код заголовку файлу" msgid "Machine start G-code" msgstr "Стартовий G-код" msgid "Machine end G-code" msgstr "Кінцевий G-код" msgid "Printing by object G-code" msgstr "G-код друку по обʼєктах" msgid "Before layer change G-code" msgstr "G-код перед зміною шару" msgid "Layer change G-code" msgstr "G-код зміни шару" msgid "Timelapse G-code" msgstr "G-код для таймлапсу" msgid "Clumping Detection G-code" msgstr "G-код виявлення налипання" msgid "Change filament G-code" msgstr "G-код зміни філаменту" msgid "Pause G-code" msgstr "G-код призупинки" msgid "Template Custom G-code" msgstr "Шаблон власного G-коду" msgid "Motion ability" msgstr "Здатність руху" msgid "Normal" msgstr "Нормальний" # AI Translated msgid "Resonance Compensation" msgstr "Компенсація резонансу" # AI Translated msgid "Resonance Avoidance Speed" msgstr "Швидкість уникнення резонансу" msgid "Frequency" msgstr "Частота" # AI Translated msgid "The frequency of the anti-vibration signal will correspond to the natural frequency of the frame." msgstr "Частота антивібраційного сигналу відповідатиме власній частоті рами." # AI Translated msgid "Damping" msgstr "Демпфування" # AI Translated msgid "Damping ratio for the input shaping filter." msgstr "Коефіцієнт демпфування для фільтра Input Shaping." msgid "Speed limitation" msgstr "Обмеження швидкості" msgid "Acceleration limitation" msgstr "Обмеження прискорення" msgid "Jerk limitation" msgstr "Обмеження ривка" msgid "Single extruder multi-material setup" msgstr "Установка для роботи з декількома матеріалами на одному екструдері" msgid "Number of extruders of the printer." msgstr "Кількість екструдерів у принтері." msgid "" "Single Extruder Multi Material is selected,\n" "and all extruders must have the same diameter.\n" "Do you want to change the diameter for all extruders to first extruder nozzle diameter value?" msgstr "" "Вибрано мульти-матеріальний (ММ) друк з одним екструдером,\n" "і всі екструдери повинні мати однаковий діаметр.\n" "Хочете змінити діаметр для всіх екструдерів на значення діаметра сопла першого екструдера?" msgid "Nozzle diameter" msgstr "Діаметр сопла" msgid "Wipe tower" msgstr "Вежа протирання" msgid "Single extruder multi-material parameters" msgstr "Параметри екструдеру в багато-екструдерному принтері" msgid "This is a single extruder multi-material printer, diameters of all extruders will be set to the new value. Do you want to proceed?" msgstr "Це принтер з підтримкою декількох матеріалів одним екструдером, діаметри всіх екструдерів буде замінено новим значенням. Хочете продовжити?" msgid "Layer height limits" msgstr "Обмеження висоти шару" msgid "Z-Hop" msgstr "Стрибок-Z" # AI Translated msgid "" "The Retract before wipe option could be only 100% when using the Firmware Retraction mode.\n" "\n" "Shall I set it to 100% in order to enable Firmware Retraction?" msgstr "" "Опція «Втягування перед протиранням» може дорівнювати лише 100% у режимі втягування прошивкою.\n" "\n" "Встановити її на 100%, щоб увімкнути втягування прошивкою?" msgid "Firmware Retraction" msgstr "Апаратне витягування" # AI Translated msgid "Switching to a printer with different extruder types or numbers will discard or reset changes to extruder or multi-nozzle-related parameters." msgstr "Перемикання на принтер з іншими типами або кількістю екструдерів призведе до відкидання чи скидання змін параметрів, повʼязаних з екструдером або кількома соплами." msgid "Use Modified Value" msgstr "Використати змінене значення" msgid "Detached" msgstr "Окремий" #, c-format, boost-format msgid "%d Filament Preset and %d Process Preset is attached to this printer. Those presets would be deleted if the printer is deleted." msgstr "За цим принтером прикріплено %d пресетів філаменту та %d пресетів процесу. Ці пресети будуть видалені, якщо принтер буде видалено." msgid "Presets inherited by other presets cannot be deleted!" msgstr "Пресети, які успадковуються іншими пресетами, не можуть бути видалені!" # AI Translated msgid "The following presets inherit this preset." msgid_plural "The following preset inherits this preset." msgstr[0] "Профіль вказаний нижче, успадковується від поточного профілю." msgstr[1] "Профілі вказані нижче, успадковуються від поточного профілю." msgstr[2] "Профілі вказані нижче, успадковуються від поточного профілю." msgstr[3] "Профілі вказані нижче, успадковуються від поточного профілю." #. TRN Remove/Delete #, boost-format msgid "%1% Preset" msgstr "%1% пресет" # AI Translated msgid "The following preset will be deleted too:" msgid_plural "The following presets will be deleted too:" msgstr[0] "Наступне попереднє встановлення також буде видалено." msgstr[1] "Наступні стилі також будуть видалені." msgstr[2] "Наступні стилі також будуть видалені." msgstr[3] "Наступні стилі також будуть видалені." msgid "" "Are you sure to delete the selected preset?\n" "If the preset corresponds to a filament currently in use on your printer, please reset the filament information for that slot." msgstr "" "Ви впевнені, що хочете видалити вибраний пресет?\n" "Якщо пресет відповідає філаменту, який в даний момент використовується на вашому принтері, будь ласка, скиньте інформацію про філамент для цього слоту." #, boost-format msgid "Are you sure you want to %1% the selected preset?" msgstr "Ви впевнені, що %1% вибраної установки?" msgid "Select printers" msgstr "Вибрати принтери" msgid "Select profiles" msgstr "Вибрати профілі" # AI Translated #, c-format, boost-format msgid "" " - %s:\n" " %s first layer %d %s, other layers %d %s\n" " %s max delta %d %s, current delta %d %s\n" msgstr "" " - %s:\n" " %s перший шар %d %s, інші шари %d %s\n" " %s макс. різниця %d %s, поточна різниця %d %s\n" # AI Translated msgid "Some first-layer and other-layer temperature pairs exceed safety limits.\n" msgstr "Деякі пари температур першого шару та інших шарів перевищують межі безпеки.\n" # AI Translated msgid "" "\n" "Invalid pairs:\n" msgstr "" "\n" "Некоректні пари:\n" # AI Translated msgid "" "\n" "You can go back to edit values, or continue if this is intentional." msgstr "" "\n" "Ви можете повернутися до редагування значень або продовжити, якщо це навмисно." msgid "" "\n" "\n" "Continue anyway?" msgstr "" "\n" "\n" "Продовжити попри все?" msgid "Temperature Safety Check" msgstr "Перевірка безпеки температури" msgid "Continue" msgstr "Продовжити" # AI Translated msgid "Don't warn again for this preset" msgstr "Більше не попереджати для цього пресету" #, c-format, boost-format msgid "%s: %s" msgstr "%s: %s" msgid "No modifications need to be copied." msgstr "Немає змін для копіювання." msgid "Copy parameters" msgstr "Параметри копіювання" # AI Translated #, c-format, boost-format msgid "Modify parameters of %s" msgstr "Змінити параметри %s" # AI Translated #, c-format, boost-format msgid "Do you want to modify the following parameters of the %s to that of the %s?" msgstr "Бажаєте змінити такі параметри %s на параметри %s?" msgid "Click to reset current value and attach to the global value." msgstr "Натисніть, щоб скинути поточне значення та приєднати його до глобальногозначення." # AI Translated msgid "Click to drop current modifications and reset to saved value." msgstr "Натисніть, щоб скасувати поточні зміни та повернутися до збереженого значення." msgid "Process Settings" msgstr "Налаштування процесу" msgid "unsaved changes" msgstr "Незбережені зміни" msgid "Transfer or discard changes" msgstr "Відкинути або зберегти зміни" msgid "Old Value" msgstr "Старе значення" msgid "New Value" msgstr "Нове значення" msgid "Transfer" msgstr "Передача" msgid "Don't save" msgstr "Не зберігати" msgid "Discard" msgstr "Не зберігати" msgid "the new profile" msgstr "новий профіль" # AI Translated #, boost-format msgid "" "Switch to\n" "\"%1%\"\n" "discarding any changes made in\n" "\"%2%\"." msgstr "" "Перемкнутися на\n" "\"%1%\"\n" "відкинувши всі зміни, зроблені в\n" "\"%2%\"." # AI Translated #, boost-format msgid "" "All \"New Value\" settings modified in\n" "\"%1%\"\n" "will be transferred to\n" "\"%2%\"." msgstr "" "Усі налаштування \"Нове значення\", змінені в\n" "\"%1%\"\n" "буде перенесено до\n" "\"%2%\"." # AI Translated #, boost-format msgid "" "All \"New Value\" settings are saved in\n" "\"%1%\"\n" "and \"%2%\" will open without any changes." msgstr "" "Усі налаштування \"Нове значення\" збережено в\n" "\"%1%\"\n" "а \"%2%\" відкриється без жодних змін." msgid "Click the right mouse button to display the full text." msgstr "Натисніть праву кнопку миші, щоб відобразити повний текст." msgid "No changes will be saved." msgstr "Всі зміни не будуть збережені" msgid "All changes will be discarded." msgstr "Всі зміни будуть відкинуті." msgid "Save the selected options." msgstr "Зберегти вибрані параметри." msgid "Keep the selected options." msgstr "Збережіть вибрані установки." msgid "Transfer the selected options to the newly selected preset." msgstr "Перенесіть вибрані параметри в новий вибраний пресет." #, boost-format msgid "" "Save the selected options to preset \n" "\"%1%\"." msgstr "" "Збережіть вибрані параметри у передвстановленні \n" "\"%1%\"." #, boost-format msgid "" "Transfer the selected options to the newly selected preset \n" "\"%1%\"." msgstr "" "Перенесіть вибрані опції в нове попереднє встановлення \n" "\"%1%\"." #, boost-format msgid "Preset \"%1%\" contains the following unsaved changes:" msgstr "Попередня установка \"%1%\" містить такі незбережені зміни:" #, boost-format msgid "Preset \"%1%\" is not compatible with the new printer profile and it contains the following unsaved changes:" msgstr "Попередня установка \"%1%\" не сумісна з новим профілем принтера, і вона містить такі незбережені зміни:" #, boost-format msgid "Preset \"%1%\" is not compatible with the new process profile and it contains the following unsaved changes:" msgstr "Попередня установка \"%1%\" не сумісна з новим профілем процесу, і вонамістить такі незбережені зміни:" #, boost-format msgid "You have changed some settings of preset \"%1%\"." msgstr "Ви змінили деякі налаштування пресету “%1%”." msgid "" "\n" "You can save or discard the preset values you have modified." msgstr "" "\n" "Ви можете зберегти або відхилити змінені значення пресету." msgid "" "\n" "You can save or discard the preset values you have modified, or choose to transfer the values you have modified to the new preset." msgstr "" "\n" "Ви можете зберегти або скинути змінені значення профілів, або перенести змінені значення до нового профілю." msgid "You have previously modified your settings." msgstr "Ви раніше змінювали свої налаштування." msgid "" "\n" "You can discard the preset values you have modified, or choose to transfer the modified values to the new project" msgstr "" "\n" "Ви можете відкинути попередньо встановлені значення, які ви змінили, або перенести змінені значення до нового проекту" msgid "Extruder count" msgstr "Кількість екструдерів" msgid "Capabilities" msgstr "Можливості" msgid "Left: " msgstr "Лівий: " msgid "Right: " msgstr "Правий: " msgid "Show all presets (including incompatible)" msgstr "Показувати всі профілі (включаючи несумісні)" msgid "Select presets to compare" msgstr "Виберіть профілі для порівняння" msgid "Left Preset Value" msgstr "Значення в Лівому Профілі" msgid "Right Preset Value" msgstr "Значення в Правому Профілі" msgid "You can only transfer to current active profile because it has been modified." msgstr "Ви можете перейти до поточного активного профілю лише тому, що він був змінений." msgid "" "Transfer the selected options from left preset to the right.\n" "Note: New modified presets will be selected in settings tabs after close this dialog." msgstr "" "Перенесіть вибрані параметри з лівого пресета до правого.\n" "Примітка: Після закриття цього діалогового вікна у вкладках налаштувань буде обрано нові змінені пресети." msgid "Transfer values from left to right" msgstr "Перенесення значень зліва направо" msgid "If enabled, this dialog can be used for transfer selected values from left to right preset." msgstr "Якщо увімкнено, цей діалог можна використовувати для перенесення вибраних значень зліва направо." msgid "One of the presets does not exist" msgstr "Один з пресетів не існує" msgid "Compared presets has different printer technology" msgstr "Порівнювані пресети мають різні технології принтера" msgid "Add File" msgstr "Додати файл" msgid "Set as cover" msgstr "Встановити як обкладинку" msgid "Cover" msgstr "Обкладинка" #, boost-format msgid "The name \"%1%\" already exists." msgstr "Назва %1% вже існує." msgid "Basic Info" msgstr "Основна інформація" msgid "Pictures" msgstr "Малюнки" msgid "Bill of Materials" msgstr "Відомість матеріалів" msgid "Assembly Guide" msgstr "Посібник зі збирання" msgid "Author" msgstr "Автор" msgid "Model Name" msgstr "Назва моделі" msgid "Description:" msgstr "Опис:" #, c-format, boost-format msgid "%s Update" msgstr "%s Оновлення" msgid "A new version is available" msgstr "Доступна нова версія" msgid "Configuration update" msgstr "Оновлення конфігурації" msgid "A new configuration package is available. Do you want to install it?" msgstr "Доступний новий пакет конфігурації, чи хочете ви встановити його?" msgid "the configuration package is incompatible with the current application." msgstr "пакет конфігурації несумісний із поточною програмою." #, c-format, boost-format msgid "" "The configuration package is incompatible with the current application.\n" "%s will update the configuration package to allow the application to start." msgstr "" "Пакет конфігурації несумісний із поточною програмою.\n" "%s оновить пакет конфігурації, інакше він не зможе запуститися" #, c-format, boost-format msgid "Exit %s" msgstr "Вихід %s" msgid "Configuration updates" msgstr "Оновлення конфігурації" msgid "No updates available." msgstr "Оновлення відсутні." msgid "The configuration is up to date." msgstr "Конфігурація є актуальною." msgid "OBJ file import color" msgstr "Імпорт кольору файлу OBJ" # AI Translated msgid "Some faces don't have color defined." msgstr "Для деяких граней не визначено колір." # AI Translated msgid "MTL file exist error, could not find the material:" msgstr "Помилка наявності файлу MTL, не вдалося знайти матеріал:" msgid "Please check OBJ or MTL file." msgstr "Будь ласка, перевірте файл OBJ або MTL." msgid "Specify number of colors:" msgstr "Вкажіть кількість кольорів:" # AI Translated msgid "Enter or click the adjustment button to modify number again" msgstr "Введіть значення або натисніть кнопку регулювання, щоб знову змінити число" msgid "Recommended " msgstr "Рекомендовано " msgid "view" msgstr "перегляд" msgid "Current filament colors" msgstr "Кольори поточного філаменту" # AI Translated msgid "Matching" msgstr "Підбір" msgid "Quick set" msgstr "Швидке встановлення" msgid "Color match" msgstr "Відповідність кольору" msgid "Approximate color matching." msgstr "Приблизне відповідання кольору." msgid "Append" msgstr "Долучити" msgid "Append to existing filaments" msgstr "Долучити до наявних філаментів" msgid "Reset mapped extruders." msgstr "Скинути відображені екструдери." msgid "Note" msgstr "Примітка" # AI Translated msgid "" "The color has been selected, you can choose OK \n" " to continue or manually adjust it." msgstr "" "Колір вибрано, ви можете натиснути OK, \n" " щоб продовжити, або скоригувати його вручну." msgid "—> " msgstr "—> " # AI Translated msgid "" "Synchronizing AMS filaments will discard your modified but unsaved filament presets.\n" "Are you sure you want to continue?" msgstr "" "Синхронізація філаментів AMS відкине ваші змінені, але не збережені пресети філаментів.\n" "Ви впевнені, що хочете продовжити?" msgctxt "Sync_AMS" msgid "Original" msgstr "Початковий" # AI Translated msgid "After mapping" msgstr "Після зіставлення" msgid "After overwriting" msgstr "Після перезапису" msgctxt "Sync_AMS" msgid "Plate" msgstr "Стіл" # AI Translated msgid "The connected printer does not match the currently selected printer. Please change the selected printer." msgstr "Підключений принтер не відповідає поточно вибраному принтеру. Змініть вибраний принтер." # AI Translated msgid "Mapping" msgstr "Зіставлення" msgid "Overwriting" msgstr "Перезапис" msgid "Reset all filament mapping" msgstr "Скинути всю організацію філаменту" msgid "(Recommended filament)" msgstr "[Рекомендований філамент]" msgid "Advanced Options" msgstr "Розширені параметри" # AI Translated msgid "" "Check heatbed flatness. Leveling makes extruded height uniform.\n" "*Automatic mode: Level first (about 10 seconds). Skip if surface is fine." msgstr "" "Перевірте рівність столу. Вирівнювання забезпечує однакову висоту екструзії.\n" "*Автоматичний режим: спочатку вирівняти (близько 10 секунд). Пропустити, якщо поверхня в нормі." # AI Translated msgid "" "Calibrate nozzle offsets to enhance print quality.\n" "*Automatic mode: Check for calibration before printing; skip if unnecessary." msgstr "" "Калібруйте зміщення сопел, щоб покращити якість друку.\n" "*Автоматичний режим: перевіряти калібрування перед друком; пропустити, якщо не потрібно." msgid "Use AMS" msgstr "Використати AMS" msgid "Tip" msgstr "Порада" # AI Translated msgid "Only synchronize filament type and color, not including AMS slot information." msgstr "Синхронізувати лише тип і колір філаменту, без інформації про слоти AMS." # AI Translated msgid "Replace the project filaments list sequentially based on printer filaments. And unused printer filaments will be automatically added to the end of the list." msgstr "Послідовно замінити список філаментів проєкту на основі філаментів принтера. Невикористані філаменти принтера буде автоматично додано в кінець списку." # AI Translated msgid "Add unused AMS filaments to filaments list." msgstr "Додати невикористані філаменти AMS до списку філаментів." # AI Translated msgid "Automatically merge the same colors in the model after mapping." msgstr "Автоматично обʼєднувати однакові кольори в моделі після зіставлення." # AI Translated msgid "After being synced, this action cannot be undone." msgstr "Після синхронізації цю дію не можна скасувати." # AI Translated msgid "After being synced, the project's filament presets and colors will be replaced with the mapped filament types and colors. This action cannot be undone." msgstr "Після синхронізації пресети та кольори філаментів проєкту буде замінено зіставленими типами та кольорами філаментів. Цю дію не можна скасувати." msgid "Are you sure to synchronize the filaments?" msgstr "Ви впевнені, що хочете синхронізувати філаменти?" msgid "Synchronize now" msgstr "Синхронізувати зараз" msgid "Synchronize Filament Information" msgstr "Синхронізувати інформацію про філамент" msgid "Add unused filaments to filaments list." msgstr "Додати не використані філаменти до списку філаментів." # AI Translated msgid "Only synchronize filament type and color, not including slot information." msgstr "Синхронізувати лише тип і колір філаменту, без інформації про слоти." # AI Translated msgid "Ext spool" msgstr "Зовнішня котушка" # AI Translated msgid "Please check whether the nozzle type of the device is the same as the preset nozzle type." msgstr "Перевірте, чи тип сопла пристрою збігається з типом сопла в пресеті." msgid "Storage is not available or is in read-only mode." msgstr "Сховище не доступне або в режимі лише для читання." #, c-format, boost-format msgid "The selected printer (%s) is incompatible with the chosen printer profile in the slicer (%s)." msgstr "Вибраний принтер (%s) несумісний з обраним профілем принтера в різальні (%s)." msgid "Timelapse is not supported because Print sequence is set to \"By object\"." msgstr "Таймлапс не підтримується через те, що послідовність друку встановлена в “За об’єктом”." # AI Translated msgid "You selected external and AMS filament at the same time in an extruder, you will need manually change external filament." msgstr "Ви одночасно вибрали для екструдера зовнішній філамент і філамент з AMS; вам доведеться вручну змінювати зовнішній філамент." msgid "Successfully synchronized nozzle information." msgstr "Успішно синхронізовано інформацію про сопло." msgid "Successfully synchronized nozzle and AMS number information." msgstr "Успішно синхронізовано інформацію про кількість AMS і сопло." msgid "Do you want to continue to sync filaments?" msgstr "Бажаєте продовжити синхронізацію філаментів?" msgid "Successfully synchronized filament color from printer." msgstr "Успішно синхронізовано колір філаменту з принтера." msgid "Successfully synchronized color and type of filament from printer." msgstr "Успішно синхронізовано колір і тип філаменту з принтера." msgctxt "FinishSyncAms" msgid "OK" msgstr "ОК" msgid "Ramming customization" msgstr "Налаштування раммінгу" msgid "" "Ramming denotes the rapid extrusion just before a tool change in a single-extruder MM printer. Its purpose is to properly shape the end of the unloaded filament so it does not prevent insertion of the new filament and can itself be reinserted later. This phase is important and different materials can require different extrusion speeds to get the good shape. For this reason, the extrusion rates during ramming are adjustable.\n" "\n" "This is an expert-level setting, incorrect adjustment will likely lead to jams, extruder wheel grinding into filament etc." msgstr "" "Раммінг означає швидке екструдування безпосередньо перед заміною інструменту в одно-екструдерному принтері ММ. Його мета полягає у правильній формі кінця виведеного філаменту, щоб вона не заважала вставці нового філаменту і може бути знову встановлений пізніше. Ця фаза є важливою, і різні матеріали можуть вимагати різної швидкості екструзії для отримання гарної форми. З цієї причини швидкість екструдування під час раммінгу регулюється.\n" "\n" "Це налаштування на рівні експерта, неправильне регулювання, ймовірно, призведе до заклинювання, подрібнення екструдерного колеса до філаменту тощо." #, boost-format msgid "For constant flow rate, hold %1% while dragging." msgstr "Для постійної обʼємної витрати утримуйте натиснутою клавішу %1% під час перетягування." msgid "ms" msgstr "мс" # AI Translated msgid "Total ramming" msgstr "Загальний раммінг" msgid "Volume" msgstr "Обʼєм" # AI Translated msgid "Ramming line" msgstr "Лінія раммінгу" # AI Translated msgid "Orca would re-calculate your flushing volumes everytime the filaments color changed or filaments changed. You could disable the auto-calculate in Orca Slicer > Preferences" msgstr "Orca перераховуватиме ваші обʼєми промивки щоразу, коли змінюється колір філаментів або самі філаменти. Ви можете вимкнути автоматичний розрахунок в Orca Slicer > Параметри" msgid "Flushing volume (mm³) for each filament pair." msgstr "Обʼєм промивки (мм³) для кожної пари філаментів." #, c-format, boost-format msgid "Suggestion: Flushing Volume in range [%d, %d]" msgstr "Пропозиція: Обʼєм промивки в діапазоні [%d, %d]" #, c-format, boost-format msgid "The multiplier should be in range [%.2f, %.2f]." msgstr "Множина повинна знаходитися в діапазоні [%.2f, %.2f]" msgid "Re-calculate" msgstr "Переобчислити" msgid "Multiplier" msgstr "Множина" msgid "Flushing volumes for filament change" msgstr "Обʼєми промивки для зміни філаменту" msgid "Please choose the filament colour" msgstr "Будь ласка, виберіть колір філаменту" # AI Translated msgid "Cloud agent is not available. Please restart OrcaSlicer and try again." msgstr "Хмарний агент недоступний. Перезапустіть OrcaSlicer і спробуйте ще раз." msgid "Bambu Network plug-in not detected." msgstr "Плагін мережі Bambu не виявлено." msgid "Click here to download it." msgstr "Натисніть тут, щоб завантажити його." msgid "Login" msgstr "Логін" msgid "Login failed. Please try again." msgstr "Не вдалося ввійти. Спробуйте ще раз." msgid "parse json failed" msgstr "не вдалося зчитати json" msgid "[Action Required] " msgstr "[Необхідна дія] " msgid "[Action Required]" msgstr "[Необхідна дія]" msgid "The configuration package is changed in previous Config Guide" msgstr "Пакет конфігурації змінено в попередньому посібнику конфігурації" msgid "Configuration package changed" msgstr "Змінено пакет конфігурації" msgid "Toolbar" msgstr "Панель інструментів" msgid "Objects list" msgstr "Список обʼєктів" msgid "Import geometry data from STL/STEP/3MF/OBJ/AMF files" msgstr "Імпорт геометричних даних із файлів STL/STEP/3MF/OBJ/AMF" msgid "Paste from clipboard" msgstr "Вставити з буфера обміну" msgid "Show/Hide 3Dconnexion devices settings dialog" msgstr "Показати/приховати діалог налаштувань пристроїв 3Dconnexion" msgid "Switch table page" msgstr "Перемкнути сторінку таблиці" msgid "Show keyboard shortcuts list" msgstr "Показати список клавіш" msgid "Global shortcuts" msgstr "Глобальні ярлики" msgid "Pan View" msgstr "Панорамний вигляд" msgid "Rotate View" msgstr "Повернути вигляд" # AI Translated msgid "Middle mouse button" msgstr "Середня кнопка миші" msgid "Zoom View" msgstr "Перегляд масштабу" msgid "Auto orients selected objects or all objects. If there are selected objects, it just orients the selected ones. Otherwise, it will orient all objects in the current project." msgstr "Автоматично орієнтує вибрані обʼєкти або всі обʼєкти. Якщо вибрано обʼєкти, він просто орієнтує обрані. В іншому випадку він будеОрієнтувати всі обʼєкти на поточному проєкт." msgid "Auto orients all objects on the active plate." msgstr "Автоматично орієнтує всі обʼєкти на поточному диску." msgid "Collapse/Expand the sidebar" msgstr "Згорнути/розгорнути бічну панель" msgid "Any arrow" msgstr "Будь-яка стрілка" msgid "Movement in camera space" msgstr "Рух у просторі камери" msgid "Select a part" msgstr "Виберіть частину" msgid "Select multiple objects" msgstr "Вибрати кілька обʼєктів" msgid "Select objects by rectangle" msgstr "Виділити обʼєкти прямокутником" # AI Translated msgctxt "Keyboard Shortcut" msgid "Arrow Up" msgstr "Стрілка вгору" msgid "Move selection 10mm in positive Y direction" msgstr "Перемістити виділення на 10 мм у позитивному напрямку Y" # AI Translated msgctxt "Keyboard Shortcut" msgid "Arrow Down" msgstr "Стрілка вниз" msgid "Move selection 10mm in negative Y direction" msgstr "Перемістити виділення на 10 мм у негативному напрямку Y" # AI Translated msgctxt "Keyboard Shortcut" msgid "Arrow Left" msgstr "Стрілка вліво" msgid "Move selection 10mm in negative X direction" msgstr "Перемістити виділення на 10 мм у негативному напрямку по осі X" # AI Translated msgctxt "Keyboard Shortcut" msgid "Arrow Right" msgstr "Стрілка вправо" msgid "Move selection 10mm in positive X direction" msgstr "Перемістити виділення на 10 мм у позитивному напрямку X" msgid "Movement step set to 1mm" msgstr "Крок переміщення встановлено на 1 мм" msgid "Keyboard 1-9: set filament for object/part" msgstr "клавіатура 1-9: встановити філамент для обʼєкта/деталі" msgid "Camera view - Default" msgstr "Вигляд камери - Типовий" msgid "Camera view - Top" msgstr "Вигляд камери - Верх" msgid "Camera view - Bottom" msgstr "Вигляд камери - Низ" msgid "Camera view - Front" msgstr "Вигляд камери - Перед" msgid "Camera view - Behind" msgstr "Вигляд камери - Зад" msgid "Camera Angle - Left side" msgstr "Кут камери – Лівий бік" msgid "Camera Angle - Right side" msgstr "Кут камери - Правий бік" msgid "Select all objects" msgstr "Вибрати всі обʼєкти" msgid "Gizmo move" msgstr "Рух Gizmo" msgid "Gizmo rotate" msgstr "Поворот Gizmo" msgid "Gizmo scale" msgstr "Шкала Gizmo" msgid "Gizmo place face on bed" msgstr "Покласти грань на стіл Gizmo" msgid "Gizmo cut" msgstr "Виріз Gizmo" msgid "Gizmo mesh boolean" msgstr "Булеві операції Gizmo" msgid "Gizmo FDM paint-on fuzzy skin" msgstr "Gizmo Малювання шорсткої поверхні" msgid "Gizmo SLA support points" msgstr "Точки підтримки Gizmo SL" msgid "Gizmo FDM paint-on seam" msgstr "Швид, що фарбується Gizmo FDM" msgid "Gizmo text emboss/engrave" msgstr "Текстове тиснення/гравіювання Gizmo" msgid "Gizmo measure" msgstr "виміряти Gizmo" msgid "Gizmo assemble" msgstr "Зібрати Gizmo" msgid "Gizmo brim ears" msgstr "Краєчки Gizmo" msgid "Zoom in" msgstr "Приблизити" msgid "Zoom out" msgstr "Віддалити" # AI Translated msgid "Toggle printable for object/part" msgstr "Перемкнути можливість друку для обʼєкта/частини" # AI Translated msgctxt "Keyboard Shortcut" msgid "Tab" msgstr "Tab" msgid "Switch between Prepare/Preview" msgstr "Переключення між Підготовка/Попередній перегляд" # AI Translated msgctxt "Keyboard Shortcut" msgid "Space" msgstr "Пробіл" # AI Translated msgid "Open actions speed dial" msgstr "Відкрити панель швидких дій" msgid "Plater" msgstr "Тарілка" msgid "Move: press to snap by 1mm" msgstr "Переміщення: натисніть для переміщення на 1 мм" msgid "Support/Color Painting: adjust pen radius" msgstr "Підтримка/Фарбування: регулювання радіуса пера" msgid "Support/Color Painting: adjust section position" msgstr "Підтримка/Фарбування: регулювання положення секцій" msgid "Gizmo" msgstr "Gizmo" msgid "Set extruder number for the objects and parts" msgstr "Встановіть номер екструдера для обʼєктів та деталей" msgid "Delete objects, parts, modifiers" msgstr "Видалення обʼєктів, частин, модифікаторів" msgid "Select the object/part and press space to change the name" msgstr "Виберіть обʼєкт/деталь і натисніть пробіл, щоб змінити назву" msgid "Mouse click" msgstr "Клацання миші" msgid "Select the object/part and mouse click to change the name" msgstr "Виберіть обʼєкт/деталь і клацніть, щоб змінити назву" msgid "Objects List" msgstr "Список обʼєктів" msgid "Vertical slider - Move active thumb Up" msgstr "Вертикальний повзунок - рух активного великого пальця вгору" msgid "Vertical slider - Move active thumb Down" msgstr "Вертикальний повзунок - Перемістити активний палець вниз" msgid "Horizontal slider - Move active thumb Left" msgstr "Горизонтальний повзунок - Перемістити активний палець вліво" msgid "Horizontal slider - Move active thumb Right" msgstr "Горизонтальний повзунок - Перемістити активний палець праворуч" msgid "On/Off one layer mode of the vertical slider" msgstr "Увімкнення/вимкнення одношарового режиму вертикального повзунка" msgid "On/Off G-code window" msgstr "Увімкнення/вимкнення вікна G-коду" msgid "Move slider 5x faster" msgstr "Переміщення повзунка в 5 разів швидше" # AI Translated msgctxt "Keyboard Shortcut" msgid "Home" msgstr "Home" msgid "Horizontal slider - Move to start position" msgstr "Горизонтальний повзунок - Перемістити в початкове положення" # AI Translated msgctxt "Keyboard Shortcut" msgid "End" msgstr "End" msgid "Horizontal slider - Move to last position" msgstr "Горизонтальний повзунок - Перемістити в останню позицію" msgid "Release Note" msgstr "Примітка до випуску" #, c-format, boost-format msgid "version %s update information:" msgstr "версія %s інформація про оновлення:" msgid "Network plug-in update" msgstr "Оновлення мережевого плагіна" # AI Translated msgid "Click OK to update the Network plug-in now. If a file is in use, the update will be applied the next time Orca Slicer launches." msgstr "Натисніть OK, щоб оновити мережевий плагін зараз. Якщо файл використовується, оновлення буде застосовано під час наступного запуску Orca Slicer." # AI Translated msgid "A new Network plug-in is available. Do you want to install it?" msgstr "Доступний новий мережевий плагін. Бажаєте встановити його?" #, c-format, boost-format msgid "A new Network plug-in (%s) is available. Do you want to install it?" msgstr "Доступний новий мережевий плагін (%s), чи хочете ви встановити його?" msgid "New version of Orca Slicer" msgstr "Нова версія Orca Slicer" msgid "Check on Microsoft Store" msgstr "Перевірити в Microsoft Store" msgid "Check on GitHub" msgstr "Перевірити на GitHub" msgid "Open Microsoft Store" msgstr "Відкрити Microsoft Store" msgid "Skip this Version" msgstr "Пропустити цю версію" #, c-format, boost-format msgid "New version available: %s. Please update OrcaSlicer from the Microsoft Store." msgstr "Доступна нова версія: %s. Будь ласка, оновіть OrcaSlicer з Microsoft Store." msgid "Confirm and Update Nozzle" msgstr "Підтвердити і оновити сопло" msgid "Connect the printer using IP and access code" msgstr "Підключити принтер за допомогою IP-адреси та коду доступу" msgid "Try the following methods to update the connection parameters and reconnect to the printer." msgstr "Спробуйте наступні методи для оновлення параметрів зʼєднання і повторно зʼєднатися з принтером." msgid "1. Please confirm Orca Slicer and your printer are in the same LAN." msgstr "Будь ласка, перевірте чи Orca Slicer і ваш принтер в одній мережі." # AI Translated msgid "2. If the IP and Access Code below are different from the actual values on your printer, please correct them." msgstr "2. Якщо IP та код доступу нижче відрізняються від фактичних значень на вашому принтері, виправте їх." # AI Translated msgid "3. Please obtain the device SN from the printer side; it is usually found in the device information on the printer screen." msgstr "3. Отримайте SN пристрою на принтері; зазвичай він міститься в інформації про пристрій на екрані принтера." msgid "IP" msgstr "IP" msgid "Access Code" msgstr "Код доступу" msgid "Printer model" msgstr "Модель принтера" msgid "Printer name" msgstr "Назва принтера" msgid "Where to find your printer's IP and Access Code?" msgstr "Де знайти IP-адресу та код доступу вашого принтера?" msgid "How to trouble shooting" msgstr "Як виявити проблему" msgid "Connect" msgstr "Підключити" msgid "Manual Setup" msgstr "Ручне налаштування" msgid "IP and Access Code Verified! You may close the window" msgstr "IP-адреса та доступний код перевірено! Ви можете закрити вікно" msgid "connecting..." msgstr "підключення…" msgid "Failed to connect to printer." msgstr "Не вдалося підключитися до принтера." msgid "Failed to publish login request." msgstr "Не вдалося опублікувати запит на вхід." msgid "The printer has already been bound." msgstr "Принтер вже прив’язаний." msgid "The printer mode is incorrect, please switch to LAN Only." msgstr "Неправильний режим принтера, будь ласка, переключіться на режим лише LAN." msgid "Connecting to printer... The dialog will close later" msgstr "Підключення до принтера… Діалогове вікно закриється пізніше" msgid "Connection failed, please double check IP and Access Code" msgstr "З’єднання не вдалося, будь ласка, перевірте IP-адресу та доступний код" msgid "" "Connection failed! If your IP and Access Code is correct, \n" "please move to step 3 for troubleshooting network issues" msgstr "" "З’єднання не вдалося! Якщо ваша IP-адреса та доступний код вірні, \n" "перейдіть до кроку 3 для вирішення проблем з мережею" # AI Translated msgid "Connection failed! Please refer to the wiki page." msgstr "Не вдалося підключитися! Зверніться до сторінки wiki." msgid "sending failed" msgstr "невдале зʼєднання" # AI Translated msgid "Failed to send. Click Retry to attempt sending again. If retrying does not work, please check the reason." msgstr "Не вдалося надіслати. Натисніть «Повторити», щоб спробувати надіслати ще раз. Якщо повторна спроба не допомагає, перевірте причину." # AI Translated msgid "reconnect" msgstr "перепідключити" # AI Translated msgid "Air Pump" msgstr "Повітряний насос" msgid "Laser 10W" msgstr "Лазер 10Вт" msgid "Laser 40W" msgstr "Лазер 40Вт" msgid "Cutting Module" msgstr "Модуль відрізання" msgid "Auto Fire Extinguishing System" msgstr "Автоматична система пожежогасіння" msgid "Filament Track Switch" msgstr "Перемикання шляху філаменту" msgid "Beta" msgstr "Бета" msgid "Update firmware" msgstr "Оновити прошивку" msgid "Beta version" msgstr "Бета-версія" msgid "Updating" msgstr "Оновлення" msgid "Update failed" msgstr "Не вдалося оновити" msgid "Update successful" msgstr "Оновлено успішно" msgid "Hotends on Rack" msgstr "Хотенд на стійці" msgid "Are you sure you want to update? This will take about 10 minutes. Do not turn off the power while the printer is updating." msgstr "Ви впевнені, що хочете оновитися? Це займе близько 10 хвилин. Не вимикайте живлення під час оновлення принтера." msgid "An important update was detected and needs to be run before printing can continue. Do you want to update now? You can also update later from 'Update firmware'." msgstr "Було виявлено важливе оновлення, яке необхідно запустити перед друком. Ви хочете оновити зараз? Ви також можете оновити пізніше з розділу ‘Оновити прошивку’." msgid "The firmware version is abnormal. Repairing and updating are required before printing. Do you want to update now? You can also update later on the printer or update next time you start Orca Slicer." msgstr "Версія прошивки незвичайна. Потрібно виправити та оновити перед друком. Ви хочете оновити зараз? Ви також можете оновити пізніше на принтері або оновлення при наступному запуску програми." msgid "Extension Board" msgstr "Плата розширення" #, boost-format msgid "Split into %1% parts" msgstr "Розділити на %1% частин" msgid "Repair finished" msgstr "Ремонт завершено" msgid "Repair failed" msgstr "Ремонт не вдалося." msgid "Repair canceled" msgstr "Ремонт скасовано" #, boost-format msgid "Copying of file %1% to %2% failed: %3%" msgstr "Копіювання %1% у %2% не вдалося: %3%" # AI Translated msgid "Please check any unsaved changes before updating the configuration." msgstr "Будь ласка, перевірте незбережені зміни перед оновленням конфігурації." msgid "Configuration package: " msgstr "Пакет конфігурації: " msgid " updated to " msgstr " оновлено до " msgid "Open G-code file:" msgstr "Відкрити файл G-коду:" msgid "One object has an empty first layer and can't be printed. Please Cut the bottom or enable supports." msgstr "Один об'єкт має порожній початковий шар і не може бути надрукований. Будь ласка, обріжте нижню частину або увімкніть підтримки." # AI Translated #, boost-format msgid "The object has empty layers between %1% and %2% and can’t be printed." msgstr "Обʼєкт має порожні шари між %1% та %2%, тому його не можна надрукувати." #, boost-format msgid "Object: %1%" msgstr "Обʼєкт: %1%" # AI Translated msgid "Parts of the object at these heights may be too thin or the object may have a faulty mesh." msgstr "Можливо, частини обʼєкта на цих висотах надто тонкі, або обʼєкт має несправну сітку." msgid "Process change extrusion role G-code" msgstr "G-код ролі екструзіх зміни процесу" msgid "Filament change extrusion role G-code" msgstr "G-код ролі екструзіх зміни філаменту" msgid "No object can be printed. It may be too small." msgstr "Жодний обʼєкт не може бути надрукований. Можливо, занадто маленький" msgid "Your print is very close to the priming regions. Make sure there is no collision." msgstr "Ваша модель для друку розташована дуже близький до основних областей. Переконайтесь, що немає зіткнення." msgid "" "Failed to generate G-code for invalid custom G-code.\n" "\n" msgstr "" "Не вдалося згенерувати g-код для неприпустимого G-коду користувача.\n" "\n" msgid "Please check the custom G-code or use the default custom G-code." msgstr "Будь ласка, перевірте власний G-код або використовуйте типовий G-код." #, boost-format msgid "Generating G-code: layer %1%" msgstr "Генерація G-коду: шар %1%" # AI Translated msgid "Flush volumes matrix do not match to the correct size!" msgstr "Матриця обʼємів промивки не відповідає правильному розміру!" msgid "set_accel_and_jerk() is only supported by Klipper" msgstr "set_accel_and_jerk() підтримується лише Klipper" # AI Translated msgid "" "Input shaping is not supported by Marlin < 2.1.2.\n" "Check your firmware version and update your G-code flavor to ´Marlin 2´." msgstr "" "Input Shaping не підтримується Marlin < 2.1.2.\n" "Перевірте версію прошивки та змініть діалект G-коду на ´Marlin 2´." # AI Translated msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2." msgstr "Input Shaping підтримується лише Klipper, RepRapFirmware і Marlin 2." msgid "Grouping error: " msgstr "Помилка групування: " msgid " can not be placed in the " msgstr " не можливо помістити у " msgid "Group error in manual mode. Please check nozzle count or regroup." msgstr "Помилка групування в ручному режимі. Перевірте кількість сопел або перегрупуйте." msgid "Internal Bridge" msgstr "Внутрішній міст" msgid "undefined error" msgstr "невизначена помилка" msgid "too many files" msgstr "занадто багато файлів" msgid "File too large" msgstr "занадто великий файл" msgid "unsupported method" msgstr "непідтримуваний метод" msgid "unsupported encryption" msgstr "непідтримуване шифрування" msgid "unsupported feature" msgstr "функція, що не підтримується" msgid "failed finding central directory" msgstr "не вдалося знайти центральний каталог" msgid "not a ZIP archive" msgstr "не ZIP-архів" msgid "invalid header or corrupted" msgstr "недійсний або пошкоджений заголовок" # AI Translated msgid "Saving to RAID is not supported." msgstr "Збереження на RAID не підтримується." msgid "decompression failed" msgstr "декомпресія не вдалася" msgid "compression failed" msgstr "збій стиснення" msgid "unexpected decompressed size" msgstr "несподіваний розмір розпакованого файлу" msgid "CRC check failed" msgstr "Перевірка CRC не вдалася" msgid "unsupported central directory size" msgstr "непідтримуваний розмір центрального каталогу" msgid "allocation failed" msgstr "не вдалося виділити" msgid "file open failed" msgstr "не вдалося відкрити файл" msgid "file create failed" msgstr "не вдалося створити файл" msgid "file write failed" msgstr "помилка запису файлу" msgid "file read failed" msgstr "читання файлу не вдалося" msgid "file close failed" msgstr "закриття файлу не вдалося" msgid "file seek failed" msgstr "пошук файлу не вдалося" msgid "file stat failed" msgstr "збій стану файлу" msgid "invalid parameter" msgstr "неприпустимий параметр" msgid "invalid filename" msgstr "неприпустима назва файлу" msgid "Buffer too small" msgstr "надто маленький буфер" msgid "internal error" msgstr "внутрішня помилка" msgid "file not found" msgstr "файл не знайдено" msgid "Archive too large" msgstr "великий архів" msgid "validation failed" msgstr "валідація не пройшла" msgid "write callback failed" msgstr "збій зворотного виклику запису" #, boost-format msgid "%1% is too close to exclusion area. There may be collisions when printing." msgstr "%1% знаходиться надто близько до забороненої зони, можливі зіткнення при друку." #, boost-format msgid "%1% is too close to others, and collisions may be caused." msgstr "%1% знаходиться надто близько до інших, що може призвести до зіткнень." #, boost-format msgid "%1% is too tall, and collisions will be caused." msgstr "%1% занадто високий, і можуть виникнути зіткнення." msgid " is too close to exclusion area, there may be collisions when printing." msgstr " знаходиться надто близько до зони відчуження, при друку можуть виникати колізії." # AI Translated msgid " is too close to clumping detection area, there may be collisions when printing." msgstr " розташовано занадто близько до зони виявлення налипання, під час друку можливі зіткнення." msgid "Prime Tower" msgstr "Підготовча вежа" msgid " is too close to others, and collisions may be caused.\n" msgstr " залишається близько до інших, що може призвести до зіткнення.\n" msgid " is too close to an exclusion area, and collisions will be caused.\n" msgstr " знаходиться надто близько до зони відчуження, що призведе до зіткнень.\n" # AI Translated msgid " is too close to clumping detection area, and collisions will be caused.\n" msgstr " розташовано занадто близько до зони виявлення налипання, і це спричинить зіткнення.\n" # AI Translated msgid " is partially outside the printable area, and it cannot be printed.\n" msgstr " частково знаходиться за межами області друку, і його неможливо надрукувати.\n" # AI Translated msgid "Selected nozzle temperatures are incompatible. Each filament's nozzle temperature must fall within the recommended nozzle temperature range of the other filaments. Otherwise, nozzle clogging or printer damage may occur." msgstr "Вибрані температури сопла несумісні. Температура сопла кожного філаменту має входити в рекомендований діапазон температур сопла інших філаментів. Інакше можливе засмічення сопла або пошкодження принтера." # AI Translated msgid "Invalid recommended nozzle temperature range. The lower bound must be lower than the upper bound." msgstr "Некоректний рекомендований діапазон температур сопла. Нижня межа має бути меншою за верхню." # AI Translated msgid "If you still want to print, you can enable the option in Preferences / Control / Slicing / Remove mixed temperature restriction." msgstr "Якщо ви все одно хочете друкувати, можете увімкнути опцію в Параметри / Керування / Нарізка / Зняти обмеження змішаних температур." msgid "No extrusions under current settings." msgstr "Немає екструзій під час поточних налаштувань." # AI Translated msgid "A gradient mixed filament is used, but 'Mixed color sublayer' is disabled. The gradient will not be printed." msgstr "Використовується змішаний філамент із градієнтом, але параметр «Підшар змішаного кольору» вимкнено. Градієнт не буде надруковано." msgid "Smooth mode of timelapse is not supported when \"by object\" sequence is enabled." msgstr "Плавний режим таймлапсу не підтримується, коли послідовність \"по обʼєкт\" увімкнено." # AI Translated msgid "Clumping detection is not supported when \"by object\" sequence is enabled." msgstr "Виявлення налипання не підтримується, коли увімкнено послідовність «по обʼєктах»." # AI Translated msgid "Enabling both precise Z height and the prime tower may cause slicing errors." msgstr "Одночасне увімкнення точної висоти Z та підготовчої вежі може спричинити помилки нарізки." # AI Translated msgid "A prime tower is required for clumping detection; otherwise, there may be flaws on the model." msgstr "Для виявлення налипання потрібна підготовча вежа; інакше на моделі можуть зʼявитися дефекти." msgid "Please select \"By object\" print sequence to print multiple objects in spiral vase mode." msgstr "Будь ласка, виберіть послідовність друку \"По обʼєкту\" для друку кілька обʼєктів у режим спіральної вази." # AI Translated msgid "Spiral (vase) mode does not work when an object contains more than one material." msgstr "Режим спіральної вази не працює, якщо обʼєкт містить більше одного матеріалу." #, boost-format msgid "While the object %1% itself fits the build volume, it exceeds the maximum build volume height because of material shrinkage compensation." msgstr "Обʼєкт %1% влазить в робочий обʼєм, але він перевищує максимальну висоту робочого обʼєму із-за компенсації усадки матеріалу." #, boost-format msgid "The object %1% exceeds the maximum build volume height." msgstr "Обʼєкт %1% перевищує максимальну висоту обʼєму друку." #, boost-format msgid "While the object %1% itself fits the build volume, its last layer exceeds the maximum build volume height." msgstr "Хоча сам обʼєкт %1% вписується в обʼєм збірки, його останній шар перевищує максимальну висоту обʼєму друку." msgid "You might want to reduce the size of your model or change current print settings and retry." msgstr "Можливо, ви захочете зменшити розмір моделі або змінити поточні налаштування друку і спробувати ще раз." msgid "Variable layer height is not supported with Organic supports." msgstr "Змінна висота шару не підтримується з Органічними підтримками." # AI Translated msgid "The wipe tower filament cannot be a mixed filament." msgstr "Філамент вежі протирання не може бути змішаним філаментом." msgid "Different nozzle diameters and different filament diameters may not work well when the prime tower is enabled. It's very experimental, so please proceed with caution." msgstr "Різні діаметри сопел та різні діаметри філаменту можуть працювати некоректно коли ввімкнена підготовча вежа. Це експериментальна функція, тому використовуйте її з обережністю." msgid "The Wipe Tower is currently only supported with the relative extruder addressing (use_relative_e_distances=1)." msgstr "Вежа протирання в даний момент підтримується лише з використанням відносної адресації екструдера (use_relative_e_distances=1)." msgid "Ooze prevention is only supported with the wipe tower when 'single_extruder_multi_material' is off." msgstr "Запобігання витіканню підтримується тільки для вежі протирання коли опція 'single_extruder_multi_material' вимкнена." msgid "The prime tower is currently only supported for the Marlin, RepRap/Sprinter, RepRapFirmware and Repetier G-code flavors." msgstr "Вежа підготовки в даний момент підтримується лише для кодів Marlin, RepRap/Sprinter, RepRapFirmware і Repetier G-code." msgid "A prime tower is not supported in “By object” print." msgstr "Під час друку \"По обʼєкту\" підготовча вежа не підтримується." msgid "A prime tower is not supported when adaptive layer height is on. It requires that all objects have the same layer height." msgstr "Підготовча вежа не підтримується при включеній адаптивній висоті шару. Для цього потрібно, щоб усі обʼєкти мали однакову висоту шару." # AI Translated msgid "A prime tower requires any “support gap” to be a multiple of layer height." msgstr "Підготовча вежа вимагає, щоб «опорний зазор» був кратним висоті шару" msgid "A prime tower requires that all objects have the same layer height." msgstr "Підготовча вежа вимагає, щоб усі обʼєкти мали однакову висоту шару" msgid "A prime tower requires that all objects are printed over the same number of raft layers." msgstr "Підготовча вежа вимагає, щоб усі обʼєкти друкувалися на однаковій кількості шарів підкладки" # AI Translated msgid "The prime tower is only supported for multiple objects if they are printed with the same support_top_z_distance." msgstr "Підготовча вежа підтримується для кількох обʼєктів, лише якщо вони друкуються з однаковим support_top_z_distance." # AI Translated msgid "A prime tower requires that all objects are sliced with the same layer height." msgstr "Підготовча вежа вимагає, щоб усі обʼєкти були нарізані з однаковою висотою шару." msgid "The prime tower is only supported if all objects have the same variable layer height." msgstr "Підготовча вежа підтримується лише в тому випадку, якщо всі обʼєкти мають однакову змінну висоту шару" msgid "One or more object were assigned an extruder that the printer does not have." msgstr "Одному або декільком об’єктам було призначено екструдер, якого принтер не має." msgid "Line width too small" msgstr "Надто мала ширина лінії" msgid "Line width too large" msgstr "Занадто велика ширина лінії" # AI Translated msgid "Printing with multiple extruders of differing nozzle diameters. If support is to be printed with the current filament (support_filament == 0 or support_interface_filament == 0), all nozzles have to be of the same diameter." msgstr "Друк кількома екструдерами з різними діаметрами сопел. Якщо підтримки друкуються поточним філаментом (support_filament == 0 або support_interface_filament == 0), усі сопла мають бути однакового діаметра." msgid "A prime tower requires that support has the same layer height as the object." msgstr "Підготовча вежа вимагає, щоб підтримка мала однакову з обʼєктом висоту шару." # AI Translated msgid "For Organic supports, two walls are supported only with the Hollow/Default base pattern." msgstr "Для органічних підтримок дві стінки підтримуються лише з базовим шаблоном Порожній/Типовий." # AI Translated msgid "The Lightning base pattern is not supported by this support type; Rectilinear will be used instead." msgstr "Базовий шаблон «Блискавка» не підтримується цим типом підтримок; натомість буде використано прямолінійний." msgid "Organic support tree tip diameter must not be smaller than support material extrusion width." msgstr "Діаметр наконечника органічного опорного дерева не повинен бути меншим за ширину екструзії опорного матеріалу." msgid "Organic support branch diameter must not be smaller than 2x support material extrusion width." msgstr "Діаметр гілки органічної опори не повинен бути меншим за 2x ширину екструзії опорного матеріалу." msgid "Organic support branch diameter must not be smaller than support tree tip diameter." msgstr "Діаметр органічної опорної гілки не повинен бути меншим за діаметр верхівки опорного дерева." # AI Translated msgid "The Hollow base pattern is not supported by this support type; Rectilinear will be used instead." msgstr "Базовий шаблон «Порожній» не підтримується цим типом підтримок; натомість буде використано прямолінійний." msgid "Support enforcers are used but support is not enabled. Please enable support." msgstr "Засоби підтримки використовуються, але підтримка не включена.Увімкніть підтримку." msgid "Layer height cannot exceed nozzle diameter." msgstr "Висота шару не може перевищувати діаметр сопла" # AI Translated msgid "Bridge line width must not exceed nozzle diameter" msgstr "Ширина лінії моста не повинна перевищувати діаметр сопла" # AI Translated msgid "\"G92 E0\" was found in before_layer_change_gcode, but the G or E are not uppercase. Please change them to the exact uppercase \"G92 E0\"." msgstr "У before_layer_change_gcode знайдено \"G92 E0\", але G або E не у верхньому регістрі. Змініть їх на точний верхній регістр \"G92 E0\"." # AI Translated msgid "\"G92 E0\" was found in layer_change_gcode, but the G or E are not uppercase. Please change them to the exact uppercase \"G92 E0\"." msgstr "У layer_change_gcode знайдено \"G92 E0\", але G або E не у верхньому регістрі. Змініть їх на точний верхній регістр \"G92 E0\"." msgid "Relative extruder addressing requires resetting the extruder position at each layer to prevent loss of floating point accuracy. Add \"G92 E0\" to layer_gcode." msgstr "Відносна адресація екструдера вимагає скидання позиції екструдера на кожному шарі, щоб запобігти втраті точності обчислень з плаваючою комою. Додайте \"G92 E0\" до layer_gcode." # AI Translated msgid "\"G92 E0\" was found in before_layer_change_gcode, which is incompatible with absolute extruder addressing." msgstr "У before_layer_change_gcode знайдено \"G92 E0\", що несумісне з абсолютною адресацією екструдера." # AI Translated msgid "\"G92 E0\" was found in layer_change_gcode, which is incompatible with absolute extruder addressing." msgstr "У layer_change_gcode знайдено \"G92 E0\", що несумісне з абсолютною адресацією екструдера." #, c-format, boost-format msgid "Plate %d: %s does not support filament %s" msgstr "Плита %d: %s не підтримує філамент %s" msgid "Setting the jerk speed too low could lead to artifacts on curved surfaces" msgstr "Занадто низька швидкість ривка може призвести до артефактів на вигнутих поверхнях" msgid "" "The jerk setting exceeds the printer's maximum jerk (machine_max_jerk_x/machine_max_jerk_y).\n" "Orca will automatically cap the jerk speed to ensure it doesn't surpass the printer's capabilities.\n" "You can adjust the maximum jerk setting in your printer's configuration to get higher speeds." msgstr "" "Налаштування ривка перевищує максимальний ривок принтера (machine_max_jerk_x/machine_max_jerk_y).\n" "Orca автоматично обмежує швидкість ривка, щоб вона не перевищувала можливості принтера.\n" "Ви можете змінити налаштування максимального ривка у конфігурації принтера, щоб отримати вищу швидкість." # AI Translated msgid "" "Junction deviation setting exceeds the printer's maximum value (machine_max_junction_deviation).\n" "Orca will automatically cap the junction deviation to ensure it doesn't surpass the printer's capabilities.\n" "You can adjust the machine_max_junction_deviation value in your printer's configuration to get higher limits." msgstr "" "Налаштування відхилення стику перевищує максимальне значення принтера (machine_max_junction_deviation).\n" "Orca автоматично обмежить відхилення стику, щоб воно не перевищувало можливості принтера.\n" "Ви можете змінити значення machine_max_junction_deviation у конфігурації принтера, щоб отримати вищі межі." msgid "" "The acceleration setting exceeds the printer's maximum acceleration (machine_max_acceleration_extruding).\n" "Orca will automatically cap the acceleration speed to ensure it doesn't surpass the printer's capabilities.\n" "You can adjust the machine_max_acceleration_extruding value in your printer's configuration to get higher speeds." msgstr "" "Налаштування прискорення перевищує максимальне прискорення принтера (machine_max_acceleration_extruding).\n" "Orca автоматично обмежує швидкість прискорення, щоб вона не перевищувала можливості принтера.\n" "Ви можете змінити значення machine_max_acceleration_extruding у конфігурації принтера, щоб отримати вищу швидкість." msgid "" "The travel acceleration setting exceeds the printer's maximum travel acceleration (machine_max_acceleration_travel).\n" "Orca will automatically cap the travel acceleration speed to ensure it doesn't surpass the printer's capabilities.\n" "You can adjust the machine_max_acceleration_travel value in your printer's configuration to get higher speeds." msgstr "" "Налаштування прискорення руху перевищує максимальне прискорення руху принтера (machine_max_acceleration_travel).\n" "Orca автоматично обмежує швидкість прискорення руху, щоб вона не перевищувала можливості принтера.\n" "Ви можете змінити значення machine_max_acceleration_travel у конфігурації принтера, щоб отримати вищу швидкість." # AI Translated msgid "The precise wall option will be ignored for outer-inner or inner-outer-inner wall sequences." msgstr "Опцію точної стінки буде проігноровано для послідовностей стінок зовнішня-внутрішня або внутрішня-зовнішня-внутрішня." # AI Translated msgid "The Adaptive Pressure Advance model for one or more extruders may contain invalid values." msgstr "Модель адаптивного Pressure Advance для одного або кількох екструдерів може містити некоректні значення." # AI Translated msgid "Filament shrinkage will not be used because filament shrinkage for the used filaments does not match." msgstr "Усадку філаменту не буде застосовано, оскільки усадка використаних філаментів не збігається." msgid "Generating skirt & brim" msgstr "Генерація спідниці та кайми" # AI Translated msgid "" "Per-object skirts cannot fit between the objects in By object print sequence.\n" "\n" "Move the objects farther apart, reduce brim/skirt size, switch Skirt type to Combined, or switch Print sequence to By layer." msgstr "" "Спідниці для кожного обʼєкта не вміщуються між обʼєктами в послідовності друку «по обʼєктах».\n" "\n" "Розсуньте обʼєкти далі один від одного, зменште розмір кайми/спідниці, змініть тип спідниці на «Обʼєднана» або змініть послідовність друку на «по шарах»." msgid "Exporting G-code" msgstr "Експорт G-code" msgid "Generating G-code" msgstr "Генерація G-code" msgid "Processing of the filename_format template failed." msgstr "Не вдалося обробити шаблон filename_format." msgid "Printer technology" msgstr "Технологія принтеру" msgid "Printable area" msgstr "Область друку" msgid "Extruder printable area" msgstr "Область друку екструдера" msgid "Support parallel printheads" msgstr "Підтримка паралельних друкуючих головок" # AI Translated msgid "Enable printer settings for machines that can use multiple printheads in parallel." msgstr "Увімкнути налаштування принтера для машин, які можуть використовувати кілька друкувальних головок паралельно." msgid "Parallel printheads count" msgstr "Кількість паралельних друкуючих головок" # AI Translated msgid "Set the number of parallel printheads for machines like OrangeStorm Giga printer." msgstr "Задайте кількість паралельних друкувальних головок для машин на кшталт принтера OrangeStorm Giga." # AI Translated msgid "Parallel printheads bed exclude areas" msgstr "Виключені зони столу для паралельних головок" # AI Translated msgid "Ordered list of bed exclude areas by parallel printhead count. Item 1 applies to one printhead, item 2 to two printheads, and so on. Leave an item empty for no excluded area." msgstr "Упорядкований список виключених зон столу за кількістю паралельних головок. Елемент 1 застосовується до однієї головки, елемент 2 — до двох головок і так далі. Залиште елемент порожнім, якщо виключеної зони немає." msgid "Excluded bed area" msgstr "Площа виключення столу" msgid "Unprintable area in XY plane. For example, X1 Series printers use the front left corner to cut filament during filament change. The area is expressed as polygon by points in following format: \"XxY, XxY, ...\"" msgstr "Недрукована область у площині XY. Наприклад, у принтерах серії X1 використовується передня панель лівий кут для обрізання нитки під час змінинитки. Площа виражається як багатокутник по точках у такому форматі: \"XxY, XxY, ...\"." msgid "Bed custom texture" msgstr "Текстура користувача столу" msgid "Bed custom model" msgstr "Індивідуальна модель стола" msgid "Elephant foot compensation" msgstr "Компенсація слонової стопи" msgid "This shrinks the first layer on the build plate to compensate for elephant foot effect." msgstr "Зменшення початкового шару на робочій пластині для компенсації ефекту слонової стопи" msgid "Elephant foot compensation layers" msgstr "Шари компенсації слонової стопи" msgid "The number of layers on which the elephant foot compensation will be active. The first layer will be shrunk by the elephant foot compensation value, then the next layers will be linearly shrunk less, up to the layer indicated by this value." msgstr "Кількість шарів, на яких буде активна компенсація \"слонової стопи\". Перший шар буде стиснуто на значення компенсації \"слонової стопи\", наступні шари будуть лінійно стискатися менше, аж до шару, вказаного цим значенням." # AI Translated msgid "Elephant foot layers density" msgstr "Щільність шарів компенсації слонової стопи" # AI Translated msgid "" "Density of internal solid infill for Elephant foot layers compensation.\n" "The initial value for the second layer is set.\n" "Subsequent layers become linearly denser by the height specified in elefant_foot_compensation_layers." msgstr "" "Щільність внутрішнього суцільного заповнення для компенсації слонової стопи.\n" "Задається початкове значення для другого шару.\n" "Наступні шари стають лінійно щільнішими на висоту, задану в elefant_foot_compensation_layers." msgid "This is the height for each layer. Smaller layer heights give greater accuracy but longer printing time." msgstr "Висота нарізки для кожного шару. Найменша висота шару означає більш точний друк, але більше часу на друк" msgid "Printable height" msgstr "Висота друку" # AI Translated msgid "This is the maximum printable height which is limited by the height of the build area." msgstr "Максимальна висота друку, яка обмежена висотою робочої зони" msgid "Extruder printable height" msgstr "Висота друку екструдера" # AI Translated msgid "Maximum printable height of this extruder which is limited by mechanism of printer." msgstr "Максимальна друкована висота цього екструдера, обмежена механікою принтера." msgid "Preferred orientation" msgstr "Бажана орієнтація" msgid "Automatically orient STL files on the Z axis upon initial import." msgstr "Автоматичне орієнтування STL за віссю Z під час першого імпорту" msgid "Printer preset names" msgstr "Імена налаштувань принтера" msgid "Use 3rd-party print host" msgstr "Використовувати сторонній хост для друку" msgid "Allow controlling BambuLab's printer through 3rd party print hosts." msgstr "Дозволяє керувати принтером BambuLab через сторонні хости друку" msgid "Use 3MF instead of G-code" msgstr "Використовувати 3MF замість G-коду" # AI Translated msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file." msgstr "Увімкніть, якщо принтер приймає файл 3MF як завдання друку. Якщо увімкнено, Orca Slicer надсилає нарізаний файл як .gcode.3mf замість звичайного файлу .gcode." # AI Translated msgid "Select the network agent implementation for printer communication." msgstr "Виберіть реалізацію мережевого агента для звʼязку з принтером." msgid "Hostname, IP or URL" msgstr "Назва хоста, IP або URL" msgid "Orca Slicer can upload G-code files to a printer host. This field should contain the hostname, IP address or URL of the printer host instance. Print host behind HAProxy with basic auth enabled can be accessed by putting the user name and password into the URL in the following format: https://username:password@your-octopi-address/" msgstr "Orca Slicer може завантажувати файли G-коду на хост принтера. Це поле повинно містити назву хоста, IP-адресу або URL-адресу екземпляра вузла принтера. Вузол друку за HAProxy з увімкненою базовою авторизацією можна отримати доступ, ввівши імʼя користувача та пароль в URL у наступному форматі: https://username:password@your-octopi-address/" msgid "Device UI" msgstr "Інтерфейс пристрою" msgid "Specify the URL of your device user interface if it's not same as print_host." msgstr "Вкажіть URL інтерфейсу користувача пристрою, якщо він не збігається з print_host" msgid "API Key / Password" msgstr "Ключ API / Пароль" msgid "Orca Slicer can upload G-code files to a printer host. This field should contain the API Key or the password required for authentication." msgstr "" "Orca Slicer може завантажувати файли G-коду на хост принтера. Це поле повинно утримувати \n" "API-ключ або пароль, необхідний для автентифікації." # AI Translated msgid "Serial Number" msgstr "Серійний номер" # AI Translated msgid "Flashforge local API requires the printer serial number." msgstr "Локальний API Flashforge вимагає серійний номер принтера." msgid "Name of the printer." msgstr "Назва принтера" msgid "HTTPS CA File" msgstr "Файл HTTPS CA" msgid "Custom CA certificate file can be specified for HTTPS OctoPrint connections, in crt/pem format. If left blank, the default OS CA certificate repository is used." msgstr "Для HTTPS-зʼєднань OctoPrint можна вказати файл сертифіката ЦС користувача, у форматі crt/pem. Якщо залишити порожнім, за замовчуванням використовуватиметься сховище сертифікатів ЦС ОС." msgid "User" msgstr "Користувач" msgid "Password" msgstr "Пароль" msgid "Ignore HTTPS certificate revocation checks" msgstr "Ігнорування перевірок відкликання сертифікатів HTTPS" # AI Translated msgid "Ignore HTTPS certificate revocation checks in the case of missing or offline distribution points. One may want to enable this option for self signed certificates if connection fails." msgstr "Ігнорувати перевірки відкликання сертифікатів HTTPS у разі відсутності або недоступності точок розповсюдження. Цю опцію можна увімкнути для самопідписаних сертифікатів, якщо підключення не вдається." msgid "Names of presets related to the physical printer." msgstr "Назви налаштувань, повʼязаних з фізичним принтером" msgid "Authorization Type" msgstr "Тип авторизації" msgid "API key" msgstr "Ключ API" msgid "HTTP digest" msgstr "HTTP-дайджест" # AI Translated msgid "Configuration for the plugin capabilities this preset uses, overriding the global Capabilities configuration. Stored as a raw JSON array and edited through the dialog behind the button, never typed in directly." msgstr "Конфігурація можливостей плагінів, які використовує цей пресет; вона перевизначає глобальну конфігурацію можливостей. Зберігається як необроблений масив JSON і редагується через діалогове вікно за кнопкою, а не вводиться безпосередньо." msgid "Avoid crossing walls" msgstr "Уникати перетину стінок" msgid "This detours to avoid traveling across walls, which may cause blobs on the surface." msgstr "Обʼїжджати та уникати проїзду через стінку, що може призвести до утворенню плям на поверхні" msgid "Avoid crossing walls - Max detour length" msgstr "Уникати перетину стінки - Максимальна довжина обʼїзду" msgid "Maximum detour distance for avoiding crossing wall: The printer won't detour if the detour distance is larger than this value. Detour length could be specified either as an absolute value or as percentage (for example 50%) of a direct travel path. A value of 0 will disable this." msgstr "Максимальна відстань об'їзду для уникнення перетину стінки. Не обʼїжджати, якщо відстань обʼїзду більша, ніж це значення. Довжина обʼїзду може бути задана або як абсолютне значення, або як відсоток (наприклад, 50%) від прямого шляху руху. Нуль для відключення" msgid "mm or %" msgstr "мм або %" msgid "Other layers" msgstr "Інші шари" msgid "This is the bed temperature for layers except for the first one. A value of 0 means the filament does not support printing on the Cool Plate SuperTack." msgstr "Температура столу для всіх шарів, крім першого. Значення 0 означає, що філамент не підтримує друк на Cool Plate SuperTack." msgid "This is the bed temperature for layers except for the first one. A value of 0 means the filament does not support printing on the Cool Plate." msgstr "Температура столу для всіх шарів, крім першого. Значення 0 означає, що філамент не підтримує друк на Холодній Пластині" msgid "This is the bed temperature for layers except for the first one. A value of 0 means the filament does not support printing on the Textured Cool Plate." msgstr "Температура столу для всіх шарів, крім першого. Значення 0 означає, що філамент не підтримує друк на Текстурованій Холодній Пластині" msgid "This is the bed temperature for layers except for the first one. A value of 0 means the filament does not support printing on the Engineering Plate." msgstr "Температура столу для всіх шарів, крім першого. Значення 0 означає, що філамент не підтримує друк на Інженерній Пластині" msgid "This is the bed temperature for layers except for the first one. A value of 0 means the filament does not support printing on the High Temp Plate." msgstr "Температура столу для всіх шарів, крім першого. Значення 0 означає, що філамент не підтримує друк на Високотемпературній Пластині" msgid "This is the bed temperature for layers except for the first one. A value of 0 means the filament does not support printing on the Textured PEI Plate." msgstr "Температура столу для всіх шарів, крім першого. Значення 0 означає, що філамент не підтримує друк на Текстурованій Пластині PEI" msgid "First layer" msgstr "Перший шар" msgid "First layer bed temperature" msgstr "Температура першого шару" msgid "This is the bed temperature of the first layer. A value of 0 means the filament does not support printing on the Cool Plate SuperTack." msgstr "Температура столу першого шару. Значення 0 означає, що філамент не підтримує друк на Холодній Пластині SuperTack" msgid "This is the bed temperature of the first layer. A value of 0 means the filament does not support printing on the Cool Plate." msgstr "Температура столу першого шару. Значення 0 означає, що філамент не підтримує друк на Холодній Пластині" msgid "This is the bed temperature of the first layer. A value of 0 means the filament does not support printing on the Textured Cool Plate." msgstr "Температура столу першого шару. Значення 0 означає, що філамент не підтримує друк на Текстурованій Холодній Пластині" msgid "This is the bed temperature of the first layer. A value of 0 means the filament does not support printing on the Engineering Plate." msgstr "Температура столу першого шару. Значення 0 означає, що філамент не підтримує друк на Інженерній Пластині" msgid "This is the bed temperature of the first layer. A value of 0 means the filament does not support printing on the High Temp Plate." msgstr "Температура столу першого шару. Значення 0 означає, що філамент не підтримує друк на Високотемпературній Пластині" msgid "This is the bed temperature of the first layer. A value of 0 means the filament does not support printing on the Textured PEI Plate." msgstr "Температура столу першого шару. Значення 0 означає, що філамент не підтримує друк на Текстурованій Пластині PEI" # AI Translated msgid "Plate types supported by the printer" msgstr "Типи пластин, які підтримує принтер" msgid "Default bed type" msgstr "Типовий тип столу" # AI Translated msgid "Default bed type for the printer (supports both numeric and string format)." msgstr "Типовий тип столу для принтера (підтримує як числовий, так і рядковий формат)." msgid "First layer print sequence" msgstr "Послідовність друку першого шару" msgid "Other layers print sequence" msgstr "Послідовність друку інших шарів" msgid "The number of other layers print sequence" msgstr "Кількість шарів для друку в іншій послідовності" msgid "Other layers filament sequence" msgstr "Послідовність філаменту для інших шарів" msgid "This G-code is inserted at every layer change before the Z lift." msgstr "Типи ліжок, які підтримує принтер" msgid "Bottom shell layers" msgstr "Шари нижньої оболонки" msgid "This is the number of solid layers of bottom shell, including the bottom surface layer. When the thickness calculated by this value is thinner than bottom shell thickness, the bottom shell layers will be increased." msgstr "Це кількість суцільних шарів нижньої оболонки, включаючи шар нижньої поверхні. Якщо отримана товщина виявиться меншою за товщину нижньої оболонки, кількість шарів нижньої оболонки буде збільшено" msgid "Bottom shell thickness" msgstr "Товщина нижньої оболонки" msgid "The number of bottom solid layers is increased when slicing if the thickness calculated by bottom shell layers is thinner than this value. This can avoid having too thin a shell when layer height is small. 0 means that this setting is disabled and the thickness of the bottom shell is determined simply by the number of bottom shell layers." msgstr "Якщо під час нарізання загальна товщина шарів нижньої оболонки виявиться меншою за це значення, буде додано більше суцільних нижніх шарів. Це дозволяє уникнути занадто тонкої оболонки при малій висоті шару. Якщо значення 0, це налаштування вимкнено, і товщина нижньої оболонки визначається лише кількістю шарів нижньої оболонки" msgid "Apply gap fill" msgstr "Застосувати заповнення прогалин" msgid "" "Enables gap fill for the selected solid surfaces. The minimum gap length that will be filled can be controlled from the filter out tiny gaps option below.\n" "\n" "Options:\n" "1. Everywhere: Applies gap fill to top, bottom and internal solid surfaces for maximum strength\n" "2. Top and Bottom surfaces: Applies gap fill to top and bottom surfaces only, balancing print speed, reducing potential over extrusion in the solid infill and making sure the top and bottom surfaces have no pinhole gaps\n" "3. Nowhere: Disables gap fill for all solid infill areas\n" "\n" "Note that if using the classic perimeter generator, gap fill may also be generated between perimeters, if a full width line cannot fit between them. That perimeter gap fill is not controlled by this setting.\n" "\n" "If you would like all gap fill, including the classic perimeter generated one, removed, set the filter out tiny gaps value to a large number, like 999999.\n" "\n" "However this is not advised, as gap fill between perimeters is contributing to the model's strength. For models where excessive gap fill is generated between perimeters, a better option would be to switch to the arachne wall generator and use this option to control whether the cosmetic top and bottom surface gap fill is generated." msgstr "" "Увімкнення заповнення проміжків для вибраних суцільних поверхонь. Мінімальну довжину проміжку, що буде заповнена, можна контролювати за допомогою параметра фільтрувати надто малі проміжки нижче.\n" "\n" "Параметри:\n" "\n" "1. Усюди: застосовує заповнення проміжків до верхніх, нижніх і внутрішніх суцільних поверхонь для максимальної міцності.\n" "2. Верхні та нижні поверхні: застосовує заповнення проміжків лише до верхньої та нижньої поверхонь, забезпечуючи баланс між швидкістю друку, зменшуючи ймовірність надмірної екструзії в суцільному заповненні та гарантуючи відсутність мікроскопічних отворів на верхніх і нижніх поверхнях.\n" "3. Ніде: вимикає заповнення проміжків для всіх суцільних заповнених областей.\n" "\n" "Зверніть увагу: якщо використовується класичний генератор периметрів, заповнення проміжків також може створюватися між периметрами, якщо між ними не поміщається повноцінна лінія. Це заповнення проміжків між периметрами не контролюється цим параметром.\n" "\n" "Якщо потрібно повністю вимкнути будь-яке заповнення проміжків, включно з тим, що генерується класичним генератором периметрів, встановіть значення параметра фільтрувати надто малі проміжки на велике число, наприклад, 999999.\n" "\n" "Однак це не рекомендується, оскільки заповнення проміжків між периметрами сприяє міцності моделі. Для моделей, у яких між периметрами генерується надмірне заповнення проміжків, кращим варіантом буде перемикання на генератор стінок Arachne і використання цього параметра для керування тим, чи буде створюватися косметичне заповнення проміжків на верхніх і нижніх поверхнях" msgid "Everywhere" msgstr "Всюди" msgid "Top and bottom surfaces" msgstr "Верхня та нижня поверхні" msgid "Nowhere" msgstr "Ніде" msgid "Force cooling for overhangs and bridges" msgstr "Примусове охолодження нависань та мостів" msgid "Enable this option to allow adjustment of the part cooling fan speed for specifically for overhangs, internal and external bridges. Setting the fan speed specifically for these features can improve overall print quality and reduce warping." msgstr "Увімкніть цю опцію, щоб дозволити регулювання швидкості вентилятора охолодження деталі спеціально для нависань, внутрішніх і зовнішніх мостів. Налаштування швидкості вентилятора спеціально для цих елементів може покращити загальну якість друку та зменшити викривлення." msgid "Overhangs and external bridges fan speed" msgstr "Швидкість вентилятора нависань та зовнішніх мостів" msgid "" "Use this part cooling fan speed when printing bridges or overhang walls with an overhang threshold that exceeds the value set in the 'Overhangs cooling threshold' parameter above. Increasing the cooling specifically for overhangs and bridges can improve the overall print quality of these features.\n" "\n" "Please note, this fan speed is clamped on the lower end by the minimum fan speed threshold set above. It is also adjusted upwards up to the maximum fan speed threshold when the minimum layer time threshold is not met." msgstr "" "Використовуйте цю швидкість вентилятора охолодження деталі під час друку мостів або стінок з нависанням, якщо кут нависання перевищує значення, встановлене в параметрі 'Поріг охолодження нависань' вище. Збільшення охолодження спеціально для нависань і мостів може покращити загальну якість друку цих елементів.\n" "\n" "Зверніть увагу, що ця швидкість вентилятора обмежена знизу мінімальним порогом швидкості вентилятора, встановленим вище. Вона також може бути збільшена до максимального порогу швидкості вентилятора, якщо не виконується мінімальний час шару." msgid "Overhang cooling activation threshold" msgstr "Поріг активації охолодження нависань" #, no-c-format, no-boost-format msgid "When the overhang exceeds this specified threshold, force the cooling fan to run at the 'Overhang Fan Speed' set below. This threshold is expressed as a percentage, indicating the portion of each line's width that is unsupported by the layer beneath it. Setting this value to 0% forces the cooling fan to run for all outer walls, regardless of the overhang degree." msgstr "Коли нависання перевищує вказаний поріг, змусити вентилятор працювати зі швидкістю \"Швидкість вентилятора нависань\", встановленою нижче. Цей поріг виражається у відсотках, вказуючи на частину ширини кожного лінії, яка не підтримується шаром під нею. Встановлення цього значення на 0% змушує вентилятор працювати для всіх зовнішніх периметрів, незалежно від кута нависання." msgid "External bridge infill direction" msgstr "Напрямок заповнення зовнішніх мостів" # AI Translated #, no-c-format, no-boost-format msgid "" "External Bridging angle override.\n" "If left to zero, the bridging angle will be calculated automatically for each specific bridge.\n" "Otherwise the provided angle will be used according to:\n" " - The absolute coordinates\n" " - The absolute coordinates + Model rotation: If Align directions to model is enabled\n" " - The optimal automatic angle + this value: If 'Relative Bridge Angle' is enabled\n" "\n" "Use 180° for zero absolute angle." msgstr "" "Перевизначення кута зовнішніх мостів.\n" "Якщо залишити нуль, кут моста обчислюватиметься автоматично для кожного конкретного моста.\n" "Інакше вказаний кут буде використано відповідно до:\n" " - Абсолютних координат\n" " - Абсолютних координат + повороту моделі: якщо увімкнено «Вирівнювати напрямки за моделлю»\n" " - Оптимального автоматичного кута + це значення: якщо увімкнено «Відносний кут моста»\n" "\n" "Використовуйте 180°, щоб отримати нульовий абсолютний кут." msgid "Internal bridge infill direction" msgstr "Напрямок заповнення внутрішніх мостів" # AI Translated msgid "" "Internal Bridging angle override.\n" "If left to zero, the bridging angle will be calculated automatically for each specific bridge.\n" "Otherwise the provided angle will be used according to:\n" " - The absolute coordinates\n" " - The absolute coordinates + Model rotation: If Align directions to model is enabled\n" " - The optimal automatic angle + this value: If 'Relative Bridge Angle' is enabled\n" "\n" "Use 180° for zero absolute angle." msgstr "" "Перевизначення кута внутрішніх мостів.\n" "Якщо залишити нуль, кут моста обчислюватиметься автоматично для кожного конкретного моста.\n" "Інакше вказаний кут буде використано відповідно до:\n" " - Абсолютних координат\n" " - Абсолютних координат + повороту моделі: якщо увімкнено «Вирівнювати напрямки за моделлю»\n" " - Оптимального автоматичного кута + це значення: якщо увімкнено «Відносний кут моста»\n" "\n" "Використовуйте 180°, щоб отримати нульовий абсолютний кут." msgid "Relative bridge angle" msgstr "Відносний кут моста" # AI Translated msgid "When enabled, the bridge angle values are added to the automatically calculated bridge direction instead of overriding it." msgstr "Якщо увімкнено, значення кута моста додаються до автоматично обчисленого напрямку моста, а не перевизначають його." msgid "External bridge density" msgstr "Щільність зовнішніх мостів" # AI Translated msgid "" "Controls the density (spacing) of external bridge lines.\n" "Theoretically, 100% means a solid bridge, but due to the tendency of bridge extrusions to sag, 100% may not be sufficient.\n" "\n" "- Higher than 100% density (Recommended Max 125%):\n" " - Pros: Produces smoother bridge surfaces, as overlapping lines provide additional support during printing.\n" " - Cons: Can cause overextrusion, which may reduce lower and upper surface quality and increase the risk of warping.\n" "\n" "- Lower than 100% density (Min 10%):\n" " - Pros: Can create a string-like first layer. Faster and with better cooling because there is more space for air to circulate around the extruded bridge.\n" " - Cons: May lead to sagging and poorer surface finish." msgstr "" "Керує щільністю (інтервалом) ліній зовнішніх мостів.\n" "Теоретично 100% означає суцільний міст, але через схильність мостових екструзій провисати 100% може бути недостатньо.\n" "\n" "- Щільність вище 100% (рекомендований максимум 125%):\n" " - Плюси: дає гладкіші поверхні мостів, оскільки лінії, що перекриваються, забезпечують додаткову опору під час друку.\n" " - Мінуси: може спричинити надлишкову екструзію, що погіршує якість нижніх і верхніх поверхонь та підвищує ризик викривлення.\n" "\n" "- Щільність нижче 100% (мінімум 10%):\n" " - Плюси: можна отримати перший шар, схожий на нитки. Швидше і з кращим охолодженням, бо навколо екструдованого моста більше простору для циркуляції повітря.\n" " - Мінуси: може призвести до провисання та гіршої якості поверхні." msgid "Internal bridge density" msgstr "Щільність внутрішніх мостів" # AI Translated msgid "" "Controls the density (spacing) of internal bridge lines.\n" "Internal bridges act as intermediate support between sparse infill and top solid infill and can strongly affect top surface quality.\n" "\n" "- Higher than 100% density (Recommended Max 125%):\n" " - Pros: Improves internal bridge strength and support under top layers, reducing sagging and improving top-surface finish.\n" " - Cons: Increases material use and print time; excessive density may cause overextrusion and internal stresses.\n" "\n" "- Lower than 100% density (Min 10%):\n" " - Pros: Can reduce pillowing and improve cooling (more airflow through the bridge), and may speed up printing.\n" " - Cons: May reduce internal support, increasing the risk of sagging and top surface defects.\n" "\n" "This option works particularly well when combined with the second internal bridge over infill option to improve bridging further before solid infill is extruded." msgstr "" "Керує щільністю (інтервалом) ліній внутрішніх мостів.\n" "Внутрішні мости слугують проміжною опорою між частковим заповненням і верхнім суцільним заповненням та можуть суттєво впливати на якість верхньої поверхні.\n" "\n" "- Щільність вище 100% (рекомендований максимум 125%):\n" " - Плюси: підвищує міцність внутрішніх мостів і опору під верхніми шарами, зменшуючи провисання та покращуючи якість верхньої поверхні.\n" " - Мінуси: збільшує витрату матеріалу та час друку; надмірна щільність може спричинити надлишкову екструзію та внутрішні напруження.\n" "\n" "- Щільність нижче 100% (мінімум 10%):\n" " - Плюси: може зменшити «подушкування» та покращити охолодження (більше повітря проходить крізь міст), а також пришвидшити друк.\n" " - Мінуси: може зменшити внутрішню опору, підвищуючи ризик провисання та дефектів верхньої поверхні.\n" "\n" "Ця опція особливо добре працює в поєднанні з опцією другого внутрішнього моста над заповненням, що ще більше покращує створення мостів перед екструзією суцільного заповнення." msgid "Bridge flow ratio" msgstr "Коефіцієнт потоку мостів" # AI Translated msgid "" "This value governs the thickness of the external (visible) bridge layer.\n" "Values above 1.0: Increase the amount of material while maintaining line spacing. This can improve line contact and strength.\n" "Values below 1.0: Reduce the amount of material while adjusting line spacing to maintain contact. This can improve sagging.\n" "\n" "The actual bridge flow used is calculated by multiplying this value with the filament flow ratio, and if set, the object's flow ratio." msgstr "" "Це значення визначає товщину зовнішнього (видимого) шару моста.\n" "Значення понад 1.0: збільшують кількість матеріалу, зберігаючи інтервал між лініями. Це може покращити контакт ліній і міцність.\n" "Значення менше 1.0: зменшують кількість матеріалу, коригуючи інтервал між лініями для збереження контакту. Це може зменшити провисання.\n" "\n" "Фактичний потік моста обчислюється множенням цього значення на коефіцієнт потоку філаменту і, якщо задано, на коефіцієнт потоку обʼєкта." # AI Translated msgid "" "Line width of the Bridge. If expressed as a %, it will be computed over the nozzle diameter.\n" "Recommended to use with a higher Bridge density or Bridge flow ratio.\n" "\n" "The maximum value is 100% or the nozzle diameter.\n" "If set to 0, the line width will match the Internal solid infill width." msgstr "" "Ширина лінії моста. Якщо задано у %, вона обчислюється відносно діаметра сопла.\n" "Рекомендується використовувати з вищою щільністю моста або вищим коефіцієнтом потоку моста.\n" "\n" "Максимальне значення — 100% або діаметр сопла.\n" "Якщо встановлено 0, ширина лінії відповідатиме ширині внутрішнього суцільного заповнення." msgid "Internal bridge flow ratio" msgstr "Коефіцієнт потоку внутрішніх мостів" # AI Translated msgid "" "This value governs the thickness of the internal bridge layer. This is the first layer over sparse infill so increasing it may increase strength and upper layer quality.\n" "Values above 1.0: Increase the amount of material while maintaining line spacing. This can improve line contact and strength.\n" "Values below 1.0: Reduce the amount of material while adjusting line spacing to maintain contact. This can improve sagging.\n" "\n" "The actual bridge flow used is calculated by multiplying this value with the filament flow ratio, and if set, the object's flow ratio." msgstr "" "Це значення визначає товщину шару внутрішнього моста. Це перший шар над частковим заповненням, тому його збільшення може підвищити міцність і якість верхніх шарів.\n" "Значення понад 1.0: збільшують кількість матеріалу, зберігаючи інтервал між лініями. Це може покращити контакт ліній і міцність.\n" "Значення менше 1.0: зменшують кількість матеріалу, коригуючи інтервал між лініями для збереження контакту. Це може зменшити провисання.\n" "\n" "Фактичний потік моста обчислюється множенням цього значення на коефіцієнт потоку філаменту і, якщо задано, на коефіцієнт потоку обʼєкта." msgid "Top surface flow ratio" msgstr "Коефіцієнт потоку верхньої поверхні" msgid "" "This factor affects the amount of material for top solid infill. You can decrease it slightly to have smooth surface finish.\n" "\n" "The actual top surface flow used is calculated by multiplying this value with the filament flow ratio, and if set, the object's flow ratio." msgstr "" "Цей коефіцієнт впливає на кількість матеріалу для суцільного верхнього заповнення. Ви можете трохи зменшити його, щоб отримати гладку поверхню.\n" "\n" "Фактичний потік матеріалу для верхньої поверхні обчислюється шляхом множення цього значення на коефіцієнт подачі філаменту, а якщо встановлено, то й на коефіцієнт подачі для обʼєкта." msgid "Bottom surface flow ratio" msgstr "Коефіцієнт потоку нижньої поверхні" msgid "" "This factor affects the amount of material for bottom solid infill.\n" "\n" "The actual bottom solid infill flow used is calculated by multiplying this value with the filament flow ratio, and if set, the object's flow ratio." msgstr "" "Цей коефіцієнт впливає на кількість матеріалу для нижнього суцільного заповнення.\n" "\n" "Фактичний потік матеріалу для нижнього суцільного заповнення обчислюється шляхом множення цього значення на коефіцієнт подачі філаменту, а також, якщо встановлено, на коефіцієнт подачі обʼєкта." # AI Translated msgid "Set other flow ratios" msgstr "Задати інші коефіцієнти потоку" # AI Translated msgid "Change flow ratios for other extrusion path types." msgstr "Змінити коефіцієнти потоку для інших типів шляхів екструзії." # AI Translated msgid "First layer flow ratio" msgstr "Коефіцієнт потоку першого шару" # AI Translated msgid "" "This factor affects the amount of material on the first layer for the extrusion path roles listed in this section.\n" "\n" "For the first layer, the actual flow ratio for each path role (does not affect brims and skirts) will be multiplied by this value." msgstr "" "Цей коефіцієнт впливає на кількість матеріалу на першому шарі для ролей шляхів екструзії, перелічених у цьому розділі.\n" "\n" "Для першого шару фактичний коефіцієнт потоку кожної ролі шляху (не впливає на кайму та спідницю) буде помножено на це значення." # AI Translated msgid "Outer wall flow ratio" msgstr "Коефіцієнт потоку зовнішньої стінки" # AI Translated msgid "" "This factor affects the amount of material for outer walls.\n" "\n" "The actual outer wall flow used is calculated by multiplying this value by the filament flow ratio, and if set, the object's flow ratio." msgstr "" "Цей коефіцієнт впливає на кількість матеріалу для зовнішніх стінок.\n" "\n" "Фактичний потік зовнішньої стінки обчислюється множенням цього значення на коефіцієнт потоку філаменту і, якщо задано, на коефіцієнт потоку обʼєкта." # AI Translated msgid "Inner wall flow ratio" msgstr "Коефіцієнт потоку внутрішньої стінки" # AI Translated msgid "" "This factor affects the amount of material for inner walls.\n" "\n" "The actual inner wall flow used is calculated by multiplying this value by the filament flow ratio, and if set, the object's flow ratio." msgstr "" "Цей коефіцієнт впливає на кількість матеріалу для внутрішніх стінок.\n" "\n" "Фактичний потік внутрішньої стінки обчислюється множенням цього значення на коефіцієнт потоку філаменту і, якщо задано, на коефіцієнт потоку обʼєкта." # AI Translated msgid "Overhang flow ratio" msgstr "Коефіцієнт потоку нависань" # AI Translated msgid "" "This factor affects the amount of material for overhangs.\n" "\n" "The actual overhang flow used is calculated by multiplying this value by the filament flow ratio, and if set, the object's flow ratio." msgstr "" "Цей коефіцієнт впливає на кількість матеріалу для нависань.\n" "\n" "Фактичний потік нависань обчислюється множенням цього значення на коефіцієнт потоку філаменту і, якщо задано, на коефіцієнт потоку обʼєкта." # AI Translated msgid "Sparse infill flow ratio" msgstr "Коефіцієнт потоку часткового заповнення" # AI Translated msgid "" "This factor affects the amount of material for sparse infill.\n" "\n" "The actual sparse infill flow used is calculated by multiplying this value by the filament flow ratio, and if set, the object's flow ratio." msgstr "" "Цей коефіцієнт впливає на кількість матеріалу для часткового заповнення.\n" "\n" "Фактичний потік часткового заповнення обчислюється множенням цього значення на коефіцієнт потоку філаменту і, якщо задано, на коефіцієнт потоку обʼєкта." # AI Translated msgid "Internal solid infill flow ratio" msgstr "Коефіцієнт потоку внутрішнього суцільного заповнення" # AI Translated msgid "" "This factor affects the amount of material for internal solid infill.\n" "\n" "The actual internal solid infill flow used is calculated by multiplying this value by the filament flow ratio, and if set, the object's flow ratio." msgstr "" "Цей коефіцієнт впливає на кількість матеріалу для внутрішнього суцільного заповнення.\n" "\n" "Фактичний потік внутрішнього суцільного заповнення обчислюється множенням цього значення на коефіцієнт потоку філаменту і, якщо задано, на коефіцієнт потоку обʼєкта." # AI Translated msgid "Gap fill flow ratio" msgstr "Коефіцієнт потоку заповнення прогалин" # AI Translated msgid "" "This factor affects the amount of material for filling the gaps.\n" "\n" "The actual gap filling flow used is calculated by multiplying this value by the filament flow ratio, and if set, the object's flow ratio." msgstr "" "Цей коефіцієнт впливає на кількість матеріалу для заповнення прогалин.\n" "\n" "Фактичний потік заповнення прогалин обчислюється множенням цього значення на коефіцієнт потоку філаменту і, якщо задано, на коефіцієнт потоку обʼєкта." # AI Translated msgid "Support flow ratio" msgstr "Коефіцієнт потоку підтримок" # AI Translated msgid "" "This factor affects the amount of material for support.\n" "\n" "The actual support flow used is calculated by multiplying this value by the filament flow ratio, and if set, the object's flow ratio." msgstr "" "Цей коефіцієнт впливає на кількість матеріалу для підтримок.\n" "\n" "Фактичний потік підтримок обчислюється множенням цього значення на коефіцієнт потоку філаменту і, якщо задано, на коефіцієнт потоку обʼєкта." # AI Translated msgid "Support interface flow ratio" msgstr "Коефіцієнт потоку інтерфейсу підтримок" # AI Translated msgid "" "This factor affects the amount of material for the support interface.\n" "\n" "The actual support interface flow used is calculated by multiplying this value by the filament flow ratio, and if set, the object's flow ratio." msgstr "" "Цей коефіцієнт впливає на кількість матеріалу для інтерфейсу підтримок.\n" "\n" "Фактичний потік інтерфейсу підтримок обчислюється множенням цього значення на коефіцієнт потоку філаменту і, якщо задано, на коефіцієнт потоку обʼєкта." msgid "Precise wall" msgstr "Точна стінка" # AI Translated msgid "Improve shell precision by adjusting outer wall spacing. This also improves layer consistency. NOTE: This option will be ignored for outer-inner or inner-outer-inner wall sequences." msgstr "Покращує точність оболонки, коригуючи інтервал зовнішньої стінки. Це також покращує однорідність шарів. ПРИМІТКА: цю опцію буде проігноровано для послідовностей стінок зовнішня-внутрішня або внутрішня-зовнішня-внутрішня." msgid "Only one wall on top surfaces" msgstr "Тільки одна стінка на верхніх поверхнях" msgid "Use only one wall on flat top surfaces, to give more space to the top infill pattern." msgstr "Використовуйте лише одну стінку на плоскій верхній поверхні, щоб надати більше місця для верхнього заповнення" msgid "One wall threshold" msgstr "Поріг в одну стіну" #, no-c-format, no-boost-format msgid "" "If a top surface has to be printed and it's partially covered by another layer, it won't be considered at a top layer where its width is below this value. This can be useful to not let the 'one perimeter on top' trigger on surface that should be covered only by perimeters. This value can be a mm or a % of the perimeter extrusion width.\n" "Warning: If enabled, artifacts can be created if you have some thin features on the next layer, like letters. Set this setting to 0 to remove these artifacts." msgstr "" "Якщо потрібно надрукувати верхню поверхню, яка частково закрита іншим шаром, вона не буде врахована у верхньому шарі, де її ширина менша за це значення. Це може бути корисним для того, щоб не дозволити спрацьовуванню ефекту \"один периметр зверху\" на поверхні, яка має бути покрита лише периметрами. Це значення може бути в мм або у % ширини екструзії периметра.\n" "Попередження: Якщо цей параметр увімкнено, можуть створюватися артефакти, якщо на наступному шарі є якісь тонкі обʼєкти, наприклад, літери. Встановіть цей параметр на 0, щоб усунути ці артефакти." msgid "Only one wall on first layer" msgstr "Тільки одна стінка на першому шарі" msgid "Use only one wall on first layer, to give more space to the bottom infill pattern." msgstr "Використовувати лише одну стінку на першому шарі, щоб надати більше місця структурі нижнього заповнення" msgid "Extra perimeters on overhangs" msgstr "Додаткові периметри для нависань" msgid "Create additional perimeter paths over steep overhangs and areas where bridges cannot be anchored." msgstr "Створювати додаткові лінії по периметру друку над крутими нависаннями та в зонах, де неможливо закріпити мости." msgid "Reverse on even" msgstr "Зміна напрямку на парних шарах" msgid "Overhang reversal" msgstr "Розворот нависань" msgid "" "Extrude perimeters that have a part over an overhang in the reverse direction on even layers. This alternating pattern can drastically improve steep overhangs.\n" "\n" "This setting can also help reduce part warping due to the reduction of stresses in the part walls." msgstr "" "Друкувати периметри, що містять частини над нависанням, у зворотному напрямку на парних шарах. Таке чергування може суттєво покращити якість друку крутих нависань.\n" "\n" "Цей параметр також допомагає зменшити викривлення деталі, оскільки знижує напруження у її стінках." msgid "Reverse only internal perimeters" msgstr "Реверс тільки внутрішніх периметрах" msgid "" "Apply the reverse perimeters logic only on internal perimeters.\n" "\n" "This setting greatly reduces part stresses as they are now distributed in alternating directions. This should reduce part warping while also maintaining external wall quality. This feature can be very useful for warp prone material, like ABS/ASA, and also for elastic filaments, like TPU and Silk PLA. It can also help reduce warping on floating regions over supports.\n" "\n" "For this setting to be the most effective, it is recommended to set the Reverse Threshold to 0 so that all internal walls print in alternating directions on even layers irrespective of their overhang degree." msgstr "" "Застосовувати логіку зворотних периметрів тільки до внутрішніх периметрів.\n" "\n" "Цей параметр значно зменшує напруження у деталях, оскільки вони тепер розподіляються в чергуючихся напрямках. Це має зменшити деформацію деталей, зберігаючи при цьому якість зовнішніх стінок. Ця функція може бути дуже корисною для матеріалів, схильних до деформації, таких як ABS/ASA, а також для еластичних філаментів, наприклад, TPU і шовковистого PLA. Вона також може допомогти зменшити деформацію на висячих областях над підтримками.\n" "\n" "Щоб цей параметр був максимально ефективним, рекомендується встановити 'Reverse Threshold' у значення 0, щоб усі внутрішні стінки друкувалися в чергуючихся напрямках на парних шарах незалежно від їхнього кута нависання." msgid "Bridge counterbore holes" msgstr "Мости на цекованих отворах" msgid "" "This option creates bridges for counterbore holes, allowing them to be printed without support. Available modes include:\n" "1. None: No bridge is created\n" "2. Partially Bridged: Only a part of the unsupported area will be bridged\n" "3. Sacrificial Layer: A full sacrificial bridge layer is created" msgstr "" "Ця опція створює перемички для зенкованих отворів, що дозволяє друкувати їх без підтримки. Доступні наступні режими\n" "1. Ніякий: Перемичка не створюється.\n" "2. Частково з мостом: Буде перекрита лише частина непідтримуваної ділянки.\n" "3. Жертвенний шар: Створюється повний шар мостового перекриття." msgid "Partially bridged" msgstr "Частково перекрито" msgid "Sacrificial layer" msgstr "Жертовний пласт" msgid "Reverse threshold" msgstr "Зворотний поріг" msgid "Overhang reversal threshold" msgstr "Поріг розвороту нависань" #, no-c-format, no-boost-format msgid "" "Number of mm the overhang need to be for the reversal to be considered useful. Can be a % of the perimeter width.\n" "Value 0 enables reversal on every even layers regardless.\n" "When Detect overhang wall is not enabled, this option is ignored and reversal happens on every even layers regardless." msgstr "" "Кількість міліметрів, на які повинно виступати нависання, щоб реверсування вважалося корисним. Може бути задано як відсоток від ширини периметра.\n" "Значення 0 увімкне реверсування на кожному парному шарі незалежно від умов.\n" "Якщо параметр 'Виявлення стінки з нависанням' не увімкнено, цей параметр ігнорується, і реверсування відбувається на кожному парному шарі незалежно." msgid "Slow down for overhangs" msgstr "Сповільнюватись для нависань" # AI Translated msgid "Enable this option to slow down when printing overhangs. The speeds for different overhang percentages are set below." msgstr "Увімкніть цей параметр, щоб сповільнювати друк нависань. Швидкості для різних відсотків нависання задаються нижче." msgid "Slow down for curled perimeters" msgstr "Уповільнення для нависаючих периметрів" # AI Translated #, no-c-format, no-boost-format msgid "" "Enable this option to slow down printing in areas where perimeters may have curled upwards.\n" "For example, additional slowdown will be applied when printing overhangs on sharp corners like the front of the Benchy hull, reducing curling which compounds over multiple layers.\n" "\n" "It is generally recommended to have this option switched on unless your printer cooling is powerful enough or the print speed is slow enough that perimeter curling does not happen. \n" "If printing with a high external perimeter speed, this parameter may introduce wall artifacts when slowing down, due to the potentially large variance in print speeds causing the extruder to be unable to keep up with the requested flow change.\n" "Root cause of these artifacts is most likely PA tuning being slightly off, especially when combined with a high PA smooth time.\n" "\n" "Recommendations when enabling this option:\n" "1. Reduce Pressure Advance smooth time to 0.015 - 0.02 so the extruder reacts quickly to the speed changes.\n" "2. Increase the minimum print speeds to limit the magnitude of the slowdown and reduce the variance between fast and slow segments.\n" "3. If artifacts still appear, enable Extrusion Rate Smoothing (ERS) to further smooth the flow transitions.\n" "\n" "Note: When this option is enabled, overhang perimeters are treated like overhangs, meaning the overhang speed is applied even if the overhanging perimeter is part of a bridge.\n" "For example, when the perimeters are 100% overhanging, with no wall supporting them from underneath, the 100% overhang speed will be applied." msgstr "" "Увімкніть цю опцію, щоб уповільнювати друк у зонах, де периметри могли загнутися вгору.\n" "Наприклад, додаткове уповільнення застосовуватиметься під час друку нависань на гострих кутах, як-от ніс корпусу Benchy, зменшуючи загинання, що накопичується протягом кількох шарів.\n" "\n" "Загалом рекомендується тримати цю опцію увімкненою, якщо тільки охолодження вашого принтера не є достатньо потужним або швидкість друку достатньо низькою, щоб загинання периметрів не виникало. \n" "Під час друку з високою швидкістю зовнішнього периметра цей параметр може спричинити артефакти на стінках під час уповільнення через потенційно велику різницю швидкостей друку, коли екструдер не встигає за потрібною зміною потоку.\n" "Корінна причина цих артефактів — найімовірніше, дещо неточне налаштування PA, особливо в поєднанні з великим часом згладжування PA.\n" "\n" "Рекомендації при увімкненні цієї опції:\n" "1. Зменште час згладжування Pressure Advance до 0.015 - 0.02, щоб екструдер швидко реагував на зміни швидкості.\n" "2. Збільште мінімальні швидкості друку, щоб обмежити величину уповільнення та зменшити різницю між швидкими й повільними ділянками.\n" "3. Якщо артефакти все ще зʼявляються, увімкніть згладжування швидкості екструзії (ERS), щоб додатково згладити переходи потоку.\n" "\n" "Примітка: коли цю опцію увімкнено, периметри нависань обробляються як нависання, тобто швидкість нависання застосовується навіть тоді, коли нависаючий периметр є частиною моста.\n" "Наприклад, коли периметри нависають на 100% і під ними немає стінки-опори, буде застосовано швидкість для 100% нависання." msgid "mm/s or %" msgstr "мм/с або %" msgid "" "Speed of the externally visible bridge extrusions.\n" "\n" "In addition, if Slow down for curled perimeters is disabled or Classic overhang mode is enabled, it will be the print speed of overhang walls that are supported by less than 13%, whether they are part of a bridge or an overhang." msgstr "" "Швидкість екструзії мостів, які видно ззовні.\n" "\n" "Крім того, якщо параметр 'Уповільнення для закручених периметрів' вимкнено або увімкнено 'Класичний режим нависань', ця швидкість буде використовуватися для друку стінок з нависанням, які підтримуються менш ніж на 13%, незалежно від того, чи є вони частиною мосту або звичайного нависання." msgid "Speed of internal bridges. If the value is expressed as a percentage, it will be calculated based on the bridge_speed. Default value is 150%." msgstr "Швидкість внутрішніх мостів. Якщо значення вказано у відсотках, воно буде розраховане на основі bridge_speed. Значення за замовчуванням: 150%." msgid "This is the distance from the model to the outermost brim line." msgstr "Відстань від моделі до останньої зовнішньої лінії кайми" msgid "Brim type" msgstr "Тип кайми" msgid "This controls the generation of the brim at outer and/or inner side of models. Auto means the brim width is analyzed and calculated automatically." msgstr "Керує генерацією кайми на зовнішніх та/або внутрішніх сторонах моделей. Авто означає, що ширина кайми аналізується та визначається автоматично." msgid "Brim-object gap" msgstr "Зазор між каймою та обʼєктом" msgid "This creates a gap between the innermost brim line and the object and can make the brim easier to remove." msgstr "Зазор між першою внутрішньою лінією кайми та обʼєктом може сприяти легшому відокремленню кайми" # AI Translated msgid "Brim flow ratio" msgstr "Коефіцієнт потоку кайми" # AI Translated msgid "" "This factor affects the amount of material for brims.\n" "\n" "The actual brim flow used is calculated by multiplying this value by the filament flow ratio, and if set, the object's flow ratio.\n" "\n" "Note: The resulting value will not be affected by the first-layer flow ratio." msgstr "" "Цей коефіцієнт впливає на кількість матеріалу для кайми.\n" "\n" "Фактичний потік кайми обчислюється множенням цього значення на коефіцієнт потоку філаменту і, якщо задано, на коефіцієнт потоку обʼєкта.\n" "\n" "Примітка: на отримане значення не впливає коефіцієнт потоку першого шару." msgid "Brim follows compensated outline" msgstr "Кайма має компенсований контур" # AI Translated msgid "" "When enabled, the brim is aligned with the first-layer perimeter geometry after Elephant Foot Compensation is applied.\n" "This option is intended for cases where Elephant Foot Compensation significantly alters the first-layer footprint.\n" "\n" "If your current setup already works well, enabling it may be unnecessary and can cause the brim to fuse with upper layers." msgstr "" "Якщо ввімкнено, кайма вирівнюється з геометрією периметра першого шару після застосування компенсації слонової стопи.\n" "Ця опція призначена для випадків, коли компенсація слонової стопи суттєво змінює обриси першого шару.\n" "\n" "Якщо ваші поточні налаштування вже працюють добре, вмикати її може бути непотрібно, і це може призвести до злипання кайми з верхніми шарами." # AI Translated msgid "Combine brims" msgstr "Обʼєднувати кайми" # AI Translated msgid "Combine multiple brims into one when they are close to each other. This can improve brim adhesion." msgstr "Обʼєднувати кілька кайм в одну, коли вони розташовані близько одна до одної. Це може покращити зчеплення кайми." msgid "Brim ears" msgstr "Вушка кайми" msgid "Only draw brim over the sharp edges of the model." msgstr "Генерувати кайму лише на гострих краях моделі." msgid "Brim ear max angle" msgstr "Максимальний кут вушка кайми" msgid "" "Maximum angle to let a brim ear appear.\n" "If set to 0, no brim will be created.\n" "If set to ~180, brim will be created on everything but straight sections." msgstr "" "Максимальний кут, за якого зʼявляється вушко кайми.\n" "Якщо встановлено на 0, кайма не буде створена.\n" "Якщо встановлено ~180, то кайма буде створена на всіх ділянках, окрім прямих." msgid "Brim ear detection radius" msgstr "Радіус виявлення вушка кайма" msgid "" "The geometry will be decimated before detecting sharp angles. This parameter indicates the minimum length of the deviation for the decimation.\n" "0 to deactivate." msgstr "" "Геометрія буде оброблена перед детектуванням гострих кутів. Цей параметр вказує мінімальну довжину відхилення для обробки.\n" "0 для вимкнення" # AI Translated msgid "Brim ears outer only" msgstr "Вушка кайми лише ззовні" # AI Translated msgid "Generate mouse ears only on the outer contour of the model, excluding holes and enclosed sections." msgstr "Створювати мишачі вушка лише на зовнішньому контурі моделі, за винятком отворів і замкнених ділянок." msgid "upward compatible machine" msgstr "висхідна сумісна машина" # AI Translated msgid "Condition" msgstr "Умова" msgid "A Boolean expression using the configuration values of an active printer profile. If this expression evaluates to true, this profile is considered compatible with the active printer profile." msgstr "Логічний вираз, що використовує значення конфігурації активного профілю принтера. Якщо цей вираз оцінюється як Правда, цей профіль вважається сумісним з активним профілем принтера." msgid "A Boolean expression using the configuration values of an active print profile. If this expression evaluates to true, this profile is considered compatible with the active print profile." msgstr "Логічний вираз, що використовує значення конфігурації активного профілю друку. Якщо цей вираз оцінюється як Правда, цей профіль вважається сумісним з активним профілем друку." msgid "This determines the print sequence, allowing you to print layer-by-layer or object-by-object." msgstr "Послідовність друку, шар за шаром або обʼєкт за обʼєктом" msgid "By layer" msgstr "По шарах" msgid "By object" msgstr "По обʼєктах" msgid "Intra-layer order" msgstr "Внутрішній порядок шарів" # AI Translated msgid "" "Order in which object instances are visited within a single layer, which controls how much travel is spent moving between them.\n" "\n" "Default: nearest-neighbor chaining, refined with 2-opt and crossing removal. A good general choice.\n" "As object list: instances are printed in the same order as the object list, without any path optimization. Use it when you need a predictable, manually controlled order.\n" "Best of all (shortest path): every strategy is evaluated and the shortest one is used. The object instance order is decided once for the whole print, while the ordering of individual islands is decided per layer, so different layers may end up using different strategies. Slightly slower to slice.\n" "Snake: serpentine row-by-row traversal, refined with 2-opt. Well suited to regular grids of many small parts.\n" "\n" "With multiple filaments or tools in the same layer, minimizing tool changes takes priority: objects are grouped by filament first and this setting only orders the instances within each filament group, so the overall sequence may not look like the shortest path across the plate." msgstr "" "Порядок, у якому обходяться екземпляри обʼєктів у межах одного шару; він визначає, скільки переміщень витрачається на переходи між ними.\n" "\n" "Типово: побудова ланцюга методом найближчого сусіда з подальшим удосконаленням алгоритмом 2-opt та усуненням перетинів. Хороший універсальний вибір.\n" "За порядком у списку: екземпляри друкуються в тому самому порядку, що й у списку обʼєктів, без жодної оптимізації шляху. Використовуйте, коли потрібен передбачуваний порядок, заданий вручну.\n" "Найкращий з усіх (найкоротший шлях): оцінюються всі стратегії й застосовується та, що дає найкоротший шлях. Порядок екземплярів обʼєктів визначається один раз для всього друку, а порядок окремих острівців — для кожного шару окремо, тож різні шари можуть використовувати різні стратегії. Нарізка триває трохи довше.\n" "Змійкою: змієподібний обхід ряд за рядом з удосконаленням алгоритмом 2-opt. Добре підходить для регулярних сіток із багатьох дрібних деталей.\n" "\n" "Якщо в одному шарі використовується кілька філаментів або інструментів, пріоритет має мінімізація змін інструмента: обʼєкти спочатку групуються за філаментом, і цей параметр упорядковує лише екземпляри в межах кожної групи, тож загальна послідовність може не виглядати як найкоротший шлях по пластині." msgid "As object list" msgstr "За порядком у списку" # AI Translated msgid "Best of all (shortest path)" msgstr "Найкращий з усіх (найкоротший шлях)" # AI Translated msgid "Snake" msgstr "Змійкою" msgid "Slow printing down for better layer cooling" msgstr "Сповільнювати друк для кращого охолодження шару" # AI Translated msgid "Enable this option to slow printing speed down to ensure that the final layer time is not shorter than the layer time threshold in \"Max fan speed threshold\", so that the layer can be cooled for a longer time. This can improve the quality for small details." msgstr "Увімкніть цю опцію, щоб уповільнити швидкість друку та зробити кінцевий час шару не коротшим за поріг часу шару в «Max fan speed threshold», щоб шар міг охолоджуватися довше. Це може покращити якість дрібних деталей." msgid "Normal printing" msgstr "Звичайний друк" msgid "This is the default acceleration for both normal printing and travel after the first layer." msgstr "Прискорення за умовчанням як для звичайного друку, так і для переміщення за виключенням першого шару" msgid "Acceleration of travel moves." msgstr "Прискорення холостого руху" msgid "First layer travel" msgstr "Переміщення першого шару" # AI Translated msgid "" "Travel acceleration of first layer.\n" "The percentage value is relative to Travel Acceleration." msgstr "" "Прискорення переміщення першого шару.\n" "Відсоткове значення задається відносно прискорення переміщення." msgid "mm/s² or %" msgstr "мм/с² або %" msgid "Acceleration of bridges. If the value is expressed as a percentage (e.g. 50%), it will be calculated based on the outer wall acceleration." msgstr "Прискорення мостів. Якщо значення виражено у відсотках (наприклад, 50%), воно розраховано з урахуванням прискорення зовнішнього периметра." msgid "Default filament profile" msgstr "Типовий профіль філаменту" msgid "Default filament profile when switching to this machine profile." msgstr "Типовий профіль філаменту під час перемикання на профіль машини." msgid "Default process profile" msgstr "Типовий профіль процесу" msgid "Default process profile when switching to this machine profile." msgstr "Типовий профіль процесу під час перемикання на профіль машини." msgid "Activate air filtration" msgstr "Активувати фільтрування повітря" msgid "Activate for better air filtration. G-code command: M106 P3 S(0-255)" msgstr "Активуйте для кращої фільтрації повітря. Команда G-коду: M106 P3 S(0-255)" msgid "Enable this to override the fan speed set in custom G-code during print." msgstr "Дозволити це, щоб змінити швидкість вентилятора, задану в спеціальному G-коді під час друку." msgid "On completion" msgstr "По завершенню" # AI Translated msgid "Enable this to override the fan speed set in custom G-code after print completion." msgstr "Увімкніть, щоб перевизначити швидкість вентилятора, задану у власному G-коді після завершення друку." msgid "Speed of exhaust fan during printing. This speed will override the speed in filament custom G-code." msgstr "Швидкість вентилятора відсмоктування під час друку. Ця швидкість перезапише швидкість у користувацькому G-коді філаменту" msgid "Speed of exhaust fan after printing completes." msgstr "Швидкість витяжного вентилятора після завершення друку" msgid "No cooling for the first" msgstr "Не охолоджувати перші" msgid "Turn off all cooling fans for the first few layers. This can be used to improve build plate adhesion." msgstr "Вимкнути всі вентилятори охолодження для певної кількості перших шарів. Вентилятор охолодження першого шару зазвичай вимкнений, щоб покращити прилипання до робочої поверхні" msgid "Don't support bridges" msgstr "Не підтримувати мости" # AI Translated msgid "This disables supporting bridges, which decreases the amount of support required. Bridges can usually be printed directly without support over a reasonable distance." msgstr "Це вимикає підтримку мостів, що зменшує потрібну кількість підтримок. Мости зазвичай можна друкувати безпосередньо без підтримки на розумній відстані." msgid "Thick external bridges" msgstr "Товсті зовнішні мости" # AI Translated msgid "" "If enabled, bridge extrusion uses a line height equal to the nozzle diameter.\n" "This increases bridge strength and reliability, allowing longer spans, but may worsen appearance.\n" "If disabled, bridges may look better but are generally reliable only for shorter spans." msgstr "" "Якщо увімкнено, екструзія мостів використовує висоту лінії, що дорівнює діаметру сопла.\n" "Це підвищує міцність і надійність мостів, дозволяючи довші прольоти, але може погіршити зовнішній вигляд.\n" "Якщо вимкнено, мости можуть виглядати краще, але зазвичай надійні лише для коротших прольотів." msgid "Thick internal bridges" msgstr "Товсті внутрішні мости" # AI Translated msgid "" "If enabled, internal bridge extrusion uses a line height equal to the nozzle diameter.\n" "This increases internal bridge strength and reliability when printed over sparse infill, but may worsen appearance.\n" "If disabled, internal bridges may look better but can be less reliable over sparse infill." msgstr "" "Якщо увімкнено, екструзія внутрішніх мостів використовує висоту лінії, що дорівнює діаметру сопла.\n" "Це підвищує міцність і надійність внутрішніх мостів під час друку поверх часткового заповнення, але може погіршити зовнішній вигляд.\n" "Якщо вимкнено, внутрішні мости можуть виглядати краще, але бути менш надійними поверх часткового заповнення." msgid "Extra bridge layers (beta)" msgstr "Додаткові шари мостів (бета)" msgid "" "This option enables the generation of an extra bridge layer over internal and/or external bridges.\n" "\n" "Extra bridge layers help improve bridge appearance and reliability, as the solid infill is better supported. This is especially useful in fast printers, where the bridge and solid infill speeds vary greatly. The extra bridge layer results in reduced pillowing on top surfaces, as well as reduced separation of the external bridge layer from its surrounding perimeters.\n" "\n" "It is generally recommended to set this to at least 'External bridge only', unless specific issues with the sliced model are found.\n" "\n" "Options:\n" "1. Disabled - does not generate second bridge layers. This is the default and is set for compatibility purposes\n" "2. External bridge only - generates second bridge layers for external-facing bridges only. Please note that small bridges that are shorter or narrower than the set number of perimeters will be skipped as they would not benefit from a second bridge layer. If generated, the second bridge layer will be extruded parallel to the first bridge layer to reinforce the bridge strength\n" "3. Internal bridge only - generates second bridge layers for internal bridges over sparse infill only. Please note that the internal bridges count towards the top shell layer count of your model. The second internal bridge layer will be extruded as close to perpendicular to the first as possible. If multiple regions in the same island, with varying bridge angles are present, the last region of that island will be selected as the angle reference\n" "4. Apply to all - generates second bridge layers for both internal and external-facing bridges\n" msgstr "" "Ця опція увімкне створення додаткового мостового шару над внутрішніми та/або зовнішніми мостами.\n" "\n" "Додаткові мостові шари покращують вигляд і надійність мостів, оскільки суцільне заповнення отримує кращу підтримку. Це особливо корисно для швидкісних принтерів, де швидкості друку мостів і суцільного заповнення значно відрізняються. Додатковий мостовий шар зменшує ефект хвилястості на верхніх поверхнях, а також знижує ризик відокремлення зовнішнього мостового шару від його периметрів.\n" "\n" "Зазвичай рекомендується встановлювати значення щонайменше 'Тільки зовнішні мости', якщо не виявлено специфічних проблем у нарізаній моделі.\n" "\n" "Опції:\n" "1. Вимкнено - не створює другий містовий шар. Це значення встановлено за замовчуванням для забезпечення сумісності.\n" "2. Тільки зовнішні мости - створює другий містовий шар лише для зовнішніх мостів. Зверніть увагу, що малі мости, які коротші або вужчі за задану кількість периметрів, будуть пропущені, оскільки для них другий містовий шар не буде корисним. Якщо другий містовий шар буде створений, він буде екструдований паралельно до першого, щоб підвищити міцність мосту.\n" "3. Тільки внутрішні мости - створює другий містовий шар лише для внутрішніх мостів над розрідженим заповненням. Врахуйте, що внутрішні мости враховуються в загальній кількості верхніх оболонок вашої моделі. Другий внутрішній містовий шар буде екструдований якомога ближче до перпендикуляра до першого. Якщо в одній області острова присутні кілька зон з різними кутами мостів, остання зона цього острова буде використовуватися як еталонний кут.\n" "4. Застосовувати до всіх - створює другий містовий шар для внутрішніх і зовнішніх мостів\n" msgid "External bridge only" msgstr "Тільки зовнішні мости" msgid "Internal bridge only" msgstr "Тільки внутрішні мости" msgid "Apply to all" msgstr "Застосовувати до всіх" msgid "Filter out small internal bridges" msgstr "Відфільтровувати маленькі внутрішні мости" msgid "" "This option can help reduce pillowing on top surfaces in heavily slanted or curved models.\n" "By default, small internal bridges are filtered out and the internal solid infill is printed directly over the sparse infill. This works well in most cases, speeding up printing without too much compromise on top surface quality.\n" "However, in heavily slanted or curved models, especially where too low a sparse infill density is used, this may result in curling of the unsupported solid infill, causing pillowing.\n" "Enabling limited filtering or no filtering will print internal bridge layer over slightly unsupported internal solid infill. The options below control the sensitivity of the filtering, i.e. they control where internal bridges are created:\n" "1. Filter - enables this option. This is the default behavior and works well in most cases\n" "2. Limited filtering - creates internal bridges on heavily slanted surfaces while avoiding unnecessary bridges. This works well for most difficult models\n" "3. No filtering - creates internal bridges on every potential internal overhang. This option is useful for heavily slanted top surface models; however, in most cases, it creates too many unnecessary bridges." msgstr "" "Ця опція може допомогти зменшити утворення ефект зморщування верхнього шару на верхніх поверхнях у моделях із сильним нахилом або вигнутими формами.\n" "За замовчуванням малі внутрішні мости відфільтровуються, і внутрішнє суцільне заповнення друкується безпосередньо поверх розрідженого заповнення. У більшості випадків це працює добре, прискорюючи друк без значного погіршення якості верхньої поверхні.\n" "Однак у моделях із сильним нахилом або вигнутими формами, особливо якщо використовується занадто низька щільність розрідженого заповнення, це може призвести до загортання незакріпленого суцільного заповнення, викликаючи зморщування.\n" "Увімкнення обмеженої фільтрації або її відключення дозволить друкувати внутрішні шари мостів поверх злегка незакріпленого внутрішнього суцільного заповнення. Нижче наведені параметри контролю чутливості фільтрації, тобто вони визначають, де створюватимуться внутрішні мости.\n" "1. Фільтрація - увімкнення цієї опції. Це поведінка за замовчуванням, яка добре працює в більшості випадків.\n" "2. Обмежена фільтрація - створює внутрішні мости на сильно нахилених поверхнях, уникаючи зайвих мостів. Це добре підходить для складних моделей.\n" "3. Без фільтрації - створює внутрішні мости на кожному потенційному внутрішньому нависанні. Цей параметр корисний для моделей із сильно нахиленою верхньою поверхнею, однак у більшості випадків створює занадто багато зайвих мостів." msgid "Limited filtering" msgstr "Обмежене фільтрування" msgid "No filtering" msgstr "Без фільтрування" msgid "Max bridge length" msgstr "Максимальна довжина мосту" msgid "This is the maximum length of bridges that don't need support. Set it to 0 if you want all bridges to be supported, and set it to a very large value if you don't want any bridges to be supported." msgstr "Макс. довжина мостів, які не потребують підтримки. Встановіть значення 0, якщо потрібна підтримка всіх мостів, і дуже велике значення, якщо підтримка мостів не потрібна." msgid "End G-code" msgstr "Завершальний G-code" msgid "Add end G-Code when finishing the entire print." msgstr "Завершальний G-code, коли закінчити весь друк" msgid "Between Object G-code" msgstr "Між G-кодами об’єктів" msgid "Insert G-code between objects. This parameter will only come into effect when you print your models object by object." msgstr "Вставити G-код між об’єктами. Цей параметр буде врахований лише тоді, коли ви друкуєте свої моделі по об’єктах" msgid "Add end G-code when finishing the printing of this filament." msgstr "Завершальний G-code, коли закінчите друк цієї нитки" msgid "Ensure vertical shell thickness" msgstr "Забезпечити вертикальну товщину оболонки" msgid "" "Add solid infill near sloping surfaces to guarantee the vertical shell thickness (top+bottom solid layers)\n" "None: No solid infill will be added anywhere. Caution: Use this option carefully if your model has sloped surfaces\n" "Critical Only: Avoid adding solid infill for walls\n" "Moderate: Add solid infill for heavily sloping surfaces only\n" "All: Add solid infill for all suitable sloping surfaces\n" "Default value is All." msgstr "" "Додайте суцільне заповнення біля похилих поверхонь, щоб гарантувати вертикальну товщину оболонки (верхній+нижній суцільні шари)\n" "Ні: Ніде не буде додано жодного твердого заповнювача. Увага: Обережно використовуйте цю опцію, якщо ваша модель має похилі поверхні\n" "Тільки критично: Уникайте додавання суцільної заливки для стін\n" "Помірно: Додавати суцільну заливку лише для сильно нахилених поверхонь\n" "Усі: Додати суцільну заливку для всіх придатних похилих поверхонь\n" "Значення за замовчуванням - Усі." msgid "Critical Only" msgstr "Тільки критичні" msgid "Moderate" msgstr "Помірно" msgid "Top surface pattern" msgstr "Шаблон верхньої поверхні" msgid "This is the line pattern for top surface infill." msgstr "Шаблон ліній заповнення верхньої поверхні" msgid "Monotonic" msgstr "Монотонний" msgid "Monotonic line" msgstr "Монотонний прямолінійний" msgid "Rectilinear" msgstr "Прямолінійний" msgid "Aligned Rectilinear" msgstr "Вирівняний прямолінійний" msgid "Concentric" msgstr "Концентричний" msgid "Hilbert Curve" msgstr "Крива Гільберта" msgid "Archimedean Chords" msgstr "Хорди Архімеда" msgid "Octagram Spiral" msgstr "Спіральна октограма" msgid "Top surface density" msgstr "Щільність верхньої поверхні" # AI Translated msgid "Density of top surface layer. A value of 100% creates a fully solid, smooth top layer. Reducing this value results in a textured top surface, according to the chosen top surface pattern. A value of 0% will result in only the walls on the top layer being created. Intended for aesthetic or functional purposes, not to fix issues such as over-extrusion." msgstr "Щільність верхнього шару поверхні. Значення 100% створює повністю суцільний, гладкий верхній шар. Зменшення цього значення дає текстуровану верхню поверхню відповідно до вибраного шаблону верхньої поверхні. Значення 0% призведе до створення лише стінок на верхньому шарі. Призначено для естетичних або функціональних цілей, а не для виправлення проблем на кшталт надлишкової екструзії." # AI Translated msgid "Top surface expansion" msgstr "Розширення верхньої поверхні" # AI Translated msgid "" "Expands the top surfaces by this distance to connect distinct top surfaces and fill gaps.\n" "Useful for cases where the top surface is interrupted by a raised feature, such as text on a plane. Expanding it removes the holes beneath these features and creates a continuous path with a better finish for printing on top. The expansion is applied to the original top surface, before any other processing such as bridging or overhang detection." msgstr "" "Розширює верхні поверхні на цю відстань, щоб зʼєднати окремі верхні поверхні та заповнити прогалини.\n" "Корисно у випадках, коли верхню поверхню перериває виступ, наприклад текст на площині. Розширення усуває отвори під цими елементами та створює безперервний шлях з кращою якістю для друку зверху. Розширення застосовується до початкової верхньої поверхні, до будь-якої іншої обробки, як-от створення мостів чи виявлення нависань." # AI Translated msgid "Top expansion wall margin" msgstr "Відступ від стінок при розширенні верху" # AI Translated msgid "" "Using “Top surface expansion” may cause a surface that did not previously touch the model's outer walls to now do so.\n" "This can cause contraction marks (such as the hull line) on the outer walls.\n" "By adding a small margin, this contraction will not occur directly on the walls, thereby preventing a visible mark." msgstr "" "Використання «Розширення верхньої поверхні» може призвести до того, що поверхня, яка раніше не торкалася зовнішніх стінок моделі, тепер їх торкатиметься.\n" "Це може спричинити сліди стягування (наприклад, лінію корпусу) на зовнішніх стінках.\n" "Додавання невеликого відступу запобігає тому, щоб це стягування відбувалося безпосередньо на стінках, і тим самим запобігає видимому сліду." # AI Translated msgid "Top expansion direction" msgstr "Напрямок розширення верху" # AI Translated msgid "" "Direction in which the top surface expansion grows.\n" " - Inward grows into the holes and gaps left by features rising from the middle of a top surface.\n" " - Outward grows the outer edge of the surface, connecting surfaces separated by features that can divide a surface, such as a lattice pattern.\n" " - Inward and Outward does both." msgstr "" "Напрямок, у якому росте розширення верхньої поверхні.\n" " - Усередину — росте в отвори та прогалини, залишені елементами, що піднімаються посеред верхньої поверхні.\n" " - Назовні — розширює зовнішній край поверхні, зʼєднуючи поверхні, розділені елементами, які можуть ділити поверхню, наприклад ґратчастим візерунком.\n" " - Усередину та назовні — робить і те, й інше." msgid "Inward and Outward" msgstr "Всередину і назовні" msgid "Inward" msgstr "Всередину" msgid "Outward" msgstr "Назовні" msgid "Bottom surface pattern" msgstr "Шаблон нижньої поверхні" msgid "This is the line pattern of bottom surface infill, not including bridge infill." msgstr "Шаблон ліній заповнення нижньої поверхні, крім заповнення мостів" msgid "Bottom surface density" msgstr "Щільність нижньої поверхні" # AI Translated msgid "" "Density of the bottom surface layer. Intended for aesthetic or functional purposes, not to fix issues such as over-extrusion.\n" "WARNING: Lowering this value may negatively affect bed adhesion." msgstr "" "Щільність нижнього шару поверхні. Призначено для естетичних або функціональних цілей, а не для виправлення проблем на кшталт надлишкової екструзії.\n" "ПОПЕРЕДЖЕННЯ: зменшення цього значення може негативно вплинути на зчеплення зі столом." # AI Translated msgid "Top surface fill order" msgstr "Порядок заповнення верхньої поверхні" # AI Translated msgid "" "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" "Напрямок, у якому заповнюються верхні поверхні при використанні шаблону з центром (Концентричний, Хорди Архімеда, Спіральна октограма).\n" "Назовні починає з центру поверхні, тож надлишок матеріалу виштовхується до краю, де він найменш помітний. Усередину починає з краю та завершується щільними кривими в центрі.\n" "Типово використовується впорядкування за найкоротшим шляхом, яке може йти в будь-якому напрямку." # AI Translated msgid "Bottom surface fill order" msgstr "Порядок заповнення нижньої поверхні" # AI Translated msgid "" "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" "Напрямок, у якому заповнюються нижні поверхні при використанні шаблону з центром (Концентричний, Хорди Архімеда, Спіральна октограма).\n" "Усередину починає кожну поверхню з ширших зовнішніх кривих, що покращує зчеплення першого шару на столах, де щільні криві в центрі можуть не прилипати. Назовні починає з центру, виштовхуючи надлишок матеріалу до краю.\n" "Типово використовується впорядкування за найкоротшим шляхом, яке може йти в будь-якому напрямку." msgid "Internal solid infill pattern" msgstr "Шаблон внутрішнього суцільного заповнення" msgid "Line pattern of internal solid infill. if the detect narrow internal solid infill be enabled, the concentric pattern will be used for the small area." msgstr "Шаблон ліній внутрішнього суцільного заповнення. Якщо увімкнено функцію виявлення вузького внутрішнього суцільного заповнення, для невеликих ділянок буде використано концентричний шаблон." msgid "Line width of outer wall. If expressed as a %, it will be computed over the nozzle diameter." msgstr "Ширина лінії зовнішньої стінки. Якщо виражена у %, буде розрахована по діаметру сопла." # AI Translated msgid "This is the printing speed for the outer walls of parts. These are generally printed slower than inner walls for higher quality." msgstr "Швидкість друку зовнішніх стінок деталей. Зазвичай їх друкують повільніше за внутрішні стінки для вищої якості." msgid "Small perimeters" msgstr "Маленькі периметри" msgid "This separate setting will affect the speed of perimeters having radius <= small_perimeter_threshold (usually holes). If expressed as percentage (for example: 80%) it will be calculated on the outer wall speed setting above. Set to zero for auto." msgstr "Це окреме налаштування впливає на швидкість периметрів, що мають радіус < = small_perimeter_threshold (зазвичай отворів). Якщо він виражений у відсотках(наприклад, 80%), то він розраховуватиметься на зазначеній вище швидкостіЗовнішній периметр. Встановіть нульове значення для автоматичного налаштування." msgid "Small perimeters threshold" msgstr "Поріг малих периметрів" msgid "This sets the threshold for small perimeter length. Default threshold is 0mm." msgstr "При цьому встановлюється поріг для невеликої довжини периметра. Порігове за замовчуванням - 0 мм" # AI Translated msgid "Small support perimeters" msgstr "Малі периметри підтримок" # AI Translated msgid "Same as \"Small perimeters\", but for supports. This separate setting will affect the speed of support for areas <= `small_support_perimeter_threshold`. If expressed as a percentage (for example: 80%), it will be calculated on the support or support interface speed setting above. Set to zero for auto." msgstr "Те саме, що й «Малі периметри», але для підтримок. Це окреме налаштування впливає на швидкість підтримок для областей <= `small_support_perimeter_threshold`. Якщо задано у відсотках (наприклад, 80%), воно обчислюється відносно наведеного вище налаштування швидкості підтримок або інтерфейсу підтримок. Встановіть нуль для автоматичного значення." # AI Translated msgid "Small support perimeters threshold" msgstr "Поріг малих периметрів підтримок" # AI Translated msgid "This sets the threshold for small support perimeter length. The default threshold is 0mm." msgstr "Задає поріг довжини малого периметра підтримок. Типовий поріг — 0 мм." msgid "Walls printing order" msgstr "Послідовність друку стінок" msgid "" "Print sequence of the internal (inner) and external (outer) walls.\n" "\n" "Use Inner/Outer for best overhangs. This is because the overhanging walls can adhere to a neighbouring perimeter while printing. However, this option results in slightly reduced surface quality as the external perimeter is deformed by being squashed to the internal perimeter.\n" "\n" "Use Inner/Outer/Inner for the best external surface finish and dimensional accuracy as the external wall is printed undisturbed from an internal perimeter. However, overhang performance will reduce as there is no internal perimeter to print the external wall against. This option requires a minimum of 3 walls to be effective as it prints the internal walls from the 3rd perimeter onwards first, then the external perimeter and, finally, the first internal perimeter. This option is recommended against the Outer/Inner option in most cases.\n" "\n" "Use Outer/Inner for the same external wall quality and dimensional accuracy benefits of Inner/Outer/Inner option. However, the Z seams will appear less consistent as the first extrusion of a new layer starts on a visible surface." msgstr "" "Послідовність друку внутрішніх (inner) та зовнішніх (outer) стін.\n" "\n" "Використовуйте внутрішню/зовнішню для найкращих виступів. Це повʼязано з тим, що стіни, які виступають, можуть прилипати до сусіднього периметра під час друку. Однак цей параметр призводить до деякого зниження якості поверхні, оскільки зовнішній периметр деформується, притискаючись до внутрішнього.\n" "\n" "Використовуйте Внутрішній/Зовнішній/Внутрішній для найкращої якості зовнішньої поверхні та точності розмірів, оскільки зовнішня стіна друкується без порушень від внутрішнього периметра. Однак, продуктивність на виході зменшиться, оскільки немає внутрішнього периметра, до якого можна було б притискати зовнішню стіну. Для ефективної роботи цієї опції потрібно щонайменше 3 стіни, оскільки спочатку друкуються внутрішні стіни, починаючи з 3-го периметра, потім зовнішній периметр і, нарешті, перший внутрішній периметр. У більшості випадків цей параметр рекомендується використовувати замість параметра Зовнішній/Внутрішній.\n" "\n" "Використовуйте опцію Зовнішня/Внутрішня для отримання такої ж якості зовнішньої стіни і точності розмірів, як і в опції Внутрішня/Зовнішня/Внутрішня. Однак шви по Z будуть виглядати менш рівномірними, оскільки перша екструзія нового шару починається на видимій поверхні " msgid "Inner/Outer" msgstr "Внутрішня/Зовнішня" msgid "Outer/Inner" msgstr "Зовнішня/Внутрішня" msgid "Inner/Outer/Inner" msgstr "Внутрішня/Зовнішня/Внутрішня" msgid "Print infill first" msgstr "Спочатку друкувати заповнення" msgid "" "Order of wall/infill. When the tickbox is unchecked the walls are printed first, which works best in most cases.\n" "\n" "Printing infill first may help with extreme overhangs as the walls have the neighbouring infill to adhere to. However, the infill will slightly push out the printed walls where it is attached to them, resulting in a worse external surface finish. It can also cause the infill to shine through the external surfaces of the part." msgstr "" "Порядок друку стінок і заповнення. Якщо прапорець не встановлено, стінки друкуються першими, що є оптимальним варіантом у більшості випадків.\n" "\n" "Друк заповнення перед стінками може допомогти при екстремальних нависаннях, оскільки стінки матимуть сусіднє заповнення для кращого зчеплення. Однак заповнення буде злегка виштовхувати надруковані стінки в місцях їхнього зʼєднання, що може погіршити якість зовнішньої поверхні. Також це може спричинити просвічування заповнення крізь зовнішні поверхні деталі." msgid "Wall loop direction" msgstr "Напрямок контуру стінки" # AI Translated msgid "" "The direction which the contour wall loops are extruded when looking down from the top.\n" "Holes are printed in the opposite direction to the contour to maintain alignment with layers whose contour polygons are incomplete and change direction, also partially forming the contour of a hole.\n" "\n" "This option will be disabled if spiral vase mode is enabled." msgstr "" "Напрямок, у якому екструдуються контурні петлі стінок, якщо дивитися згори.\n" "Отвори друкуються у протилежному до контуру напрямку, щоб зберегти узгодженість із шарами, у яких полігони контуру неповні та змінюють напрямок, частково формуючи також контур отвору.\n" "\n" "Цю опцію буде вимкнено, якщо увімкнено режим спіральної вази." msgid "Counter clockwise" msgstr "Проти годинникової стрілки" msgid "Clockwise" msgstr "За годинниковою стрілкою" msgid "Height to rod" msgstr "Висота до сопла" msgid "Distance from the nozzle tip to the lower rod. Used for collision avoidance in by-object printing." msgstr "Відстань від кінчика сопла до нижнього штока. Використовується для уникнення зіткнення під час друку за об’єктами." msgid "Height to lid" msgstr "Висота до кришки" msgid "Distance from the nozzle tip to the lid. Used for collision avoidance in by-object printing." msgstr "Відстань від кінчика сопла до кришки. Використовується для уникнення зіткнення під час друку за обʼєктами." msgid "Clearance radius around extruder: used for collision avoidance in by-object printing." msgstr "Радіус вільного простору навколо екструдера. Використовується для уникнення зіткнення під час друку за об’єктами." msgid "Nozzle height" msgstr "Висота насадки" msgid "The height of nozzle tip." msgstr "Висота кінчика насадки." msgid "Bed mesh min" msgstr "Сітка для стола min" msgid "This option sets the min point for the allowed bed mesh area. Due to the probe's XY offset, most printers are unable to probe the entire bed. To ensure the probe point does not go outside the bed area, the minimum and maximum points of the bed mesh should be set appropriately. OrcaSlicer ensures that adaptive_bed_mesh_min/adaptive_bed_mesh_max values do not exceed these min/max points. This information can usually be obtained from your printer manufacturer. The default setting is (-99999, -99999), which means there are no limits, thus allowing probing across the entire bed." msgstr "Цей параметр встановлює мінімальну точку для допустимої площі сітки столу. Через зміщення датчика по осях XY більшість принтерів не можуть промацувати все полотно. Щоб переконатися, що точка зонда не виходить за межі поля, мінімальна і максимальна точки сітки поля повинні бути встановлені відповідним чином. OrcaSlicer гарантує, що значення adaptive_bed_mesh_min/adaptive_bed_mesh_max не перевищують ці мінімальні/максимальні точки. Цю інформацію зазвичай можна отримати від виробника принтера. За замовчуванням встановлено значення (-99999, -99999), що означає відсутність обмежень, що дозволяє проводити зондування по всьому шару." msgid "Bed mesh max" msgstr "Сітка столу макс" msgid "This option sets the max point for the allowed bed mesh area. Due to the probe's XY offset, most printers are unable to probe the entire bed. To ensure the probe point does not go outside the bed area, the minimum and maximum points of the bed mesh should be set appropriately. OrcaSlicer ensures that adaptive_bed_mesh_min/adaptive_bed_mesh_max values do not exceed these min/max points. This information can usually be obtained from your printer manufacturer. The default setting is (99999, 99999), which means there are no limits, thus allowing probing across the entire bed." msgstr "Цей параметр встановлює максимальну точку для допустимої площі сітки столу. Через зміщення датчика по осях XY більшість принтерів не можуть промацувати всю поверхню полотна. Щоб переконатися, що точка зонда не виходить за межі поля, мінімальна і максимальна точки сітки поля повинні бути встановлені відповідним чином. OrcaSlicer гарантує, що значення adaptive_bed_mesh_min/adaptive_bed_mesh_max не перевищують ці мінімальні/максимальні точки. Цю інформацію зазвичай можна отримати від виробника принтера. За замовчуванням встановлено значення (99999, 99999), що означає відсутність обмежень, що дозволяє проводити зондування по всьому шару." msgid "Probe point distance" msgstr "Відстань до зонда" msgid "This option sets the preferred distance between probe points (grid size) for the X and Y directions, with the default being 50mm for both X and Y." msgstr "Цей параметр встановлює бажану відстань між точками зонда (розмір сітки) для напрямків X і Y, за замовчуванням 50 мм для X і Y." msgid "Mesh margin" msgstr "Поле сітки" msgid "This option determines the additional distance by which the adaptive bed mesh area should be expanded in the XY directions." msgstr "Цей параметр визначає додаткову відстань, на яку слід розширити площу адаптивної сітки в напрямках XY." # AI Translated msgid "Grab length" msgstr "Довжина захоплення" msgid "Extruder Color" msgstr "Колір екструдера" msgid "Only used as a visual help on UI." msgstr "Використовується лише як візуальна допомога в інтерфейсі користувача" msgid "Extruder offset" msgstr "Зміщення екструдера" # AI Translated msgid "The material may have volumetric change after switching between molten and crystalline states. This setting changes all extrusion flow of this filament in G-code proportionally. The recommended value range is between 0.95 and 1.05. You may be able to tune this value to get a nice flat surface if there is slight overflow or underflow." msgstr "Матеріал може змінювати обʼєм після переходу між розплавленим і кристалічним станом. Це налаштування пропорційно змінює весь потік екструзії цього філаменту в G-code. Рекомендований діапазон значень – від 0,95 до 1,05. Ви можете налаштувати це значення, щоб отримати рівну поверхню, якщо є невеликий надлишок або нестача матеріалу" # AI Translated msgid "" "The material may have volumetric change after switching between molten and crystalline states. This setting changes all extrusion flow of this filament in G-code proportionally. The recommended value range is between 0.95 and 1.05. You may be able to tune this value to get a nice flat surface if there is slight overflow or underflow.\n" "\n" "The final object flow ratio is this value multiplied by the filament flow ratio." msgstr "" "Матеріал може змінювати обʼєм після переходу між розплавленим і кристалічним станом. Цей параметр пропорційно змінює весь потік екструзії для цього філаменту в G-code. Рекомендований діапазон значень – від 0.95 до 1.05. Ви можете налаштувати це значення, щоб отримати рівну поверхню в разі незначного переплаву або недоплаву.\n" "\n" "Підсумковий коефіцієнт потоку обʼєкта дорівнює цьому значенню, помноженому на коефіцієнт потоку філаменту." msgid "Enable pressure advance" msgstr "Увімкнути випередження тиску PA" msgid "Enable pressure advance, auto calibration result will be overwritten once enabled." msgstr "Включити випередження тиску, результат автоматичного калібрування буде перезаписано після увімкнення." msgid "Pressure advance (Klipper) AKA Linear advance factor (Marlin)." msgstr "Випередження тиску (Klipper) або Коефіцієнт лінійного випередження (Marlin)" msgid "Enable adaptive pressure advance (beta)" msgstr "Увімкнути адаптивне випередження тиску (бета)" #, no-c-format, no-boost-format msgid "" "With increasing print speeds (and hence increasing volumetric flow through the nozzle) and increasing accelerations, it has been observed that the effective PA value typically decreases. This means that a single PA value is not always 100% optimal for all features and a compromise value is usually used that does not cause too much bulging on features with lower flow speed and accelerations while also not causing gaps on faster features.\n" "\n" "This feature aims to address this limitation by modeling the response of your printer's extrusion system depending on the volumetric flow speed and acceleration it is printing at. Internally, it generates a fitted model that can extrapolate the needed pressure advance for any given volumetric flow speed and acceleration, which is then emitted to the printer depending on the current print conditions.\n" "\n" "When enabled, the pressure advance value above is overridden. However, a reasonable default value above is strongly recommended to act as a fallback and for when tool changing.\n" "\n" msgstr "" "Зі збільшенням швидкості друку (а отже, і збільшенням обʼємного потоку через сопло) та зростанням прискорень спостерігається, що ефективне значення PA зазвичай зменшується. Це означає, що одне значення PA не завжди є 100% оптимальним для всіх елементів, і зазвичай використовується компромісне значення, яке не спричиняє надмірного здуття на елементах із нижчою швидкістю потоку та прискореннями, але водночас не створює проміжків на швидших елементах.\n" "\n" "Ця функція покликана усунути це обмеження, моделюючи реакцію екструзійної системи принтера залежно від швидкості обʼємного потоку та прискорення під час друку. Внутрішньо вона створює адаптовану модель, яка може екстраполювати необхідний параметр попереднього тиску для будь-якої заданої швидкості обʼємного потоку та прискорення, а потім передавати його на принтер відповідно до поточних умов друку.\n" "\n" "Якщо функцію увімкнено, значення попереднього тиску, зазначене вище, буде замінене. Однак настійно рекомендується вказати розумне значення за замовчуванням, яке діятиме як резервне і використовуватиметься під час зміни інструменту.\n" "\n" msgid "Adaptive pressure advance measurements (beta)" msgstr "Виміри адаптивного випередження тиску (бета)" #, no-c-format, no-boost-format msgid "" "Add sets of pressure advance (PA) values, the volumetric flow speeds and accelerations they were measured at, separated by a comma. One set of values per line. For example\n" "0.04,3.96,3000\n" "0.033,3.96,10000\n" "0.029,7.91,3000\n" "0.026,7.91,10000\n" "\n" "How to calibrate:\n" "1. Run the pressure advance test for at least 3 speeds per acceleration value. It is recommended that the test is run for at least the speed of the external perimeters, the speed of the internal perimeters and the fastest feature print speed in your profile (usually its the sparse or solid infill). Then run them for the same speeds for the slowest and fastest print accelerations, and no faster than the recommended maximum acceleration as given by the Klipper input shaper\n" "2. Take note of the optimal PA value for each volumetric flow speed and acceleration. You can find the flow number by selecting flow from the color scheme drop down and move the horizontal slider over the PA pattern lines. The number should be visible at the bottom of the page. The ideal PA value should be decreasing the higher the volumetric flow is. If it is not, confirm that your extruder is functioning correctly. The slower and with less acceleration you print, the larger the range of acceptable PA values. If no difference is visible, use the PA value from the faster test\n" "3. Enter the triplets of PA values, Flow and Accelerations in the text box here and save your filament profile." msgstr "" "Додайте набори значень корекції тиску (PA), обʼємних швидкостей подачі та прискорень, при яких вони були виміряні, розділені комами. Один набір значень на рядок. Наприклад:\n" "0.04,3.96,3000\n" "0.033,3.96,10000\n" "0.029,7.91,3000\n" "0.026,7.91,10000\n" "\n" "Як виконати калібрування:\n" "1. Виконайте тест корекції тиску принаймні для 3 швидкостей на кожне значення прискорення. Рекомендується запускати тест щонайменше для швидкості зовнішніх периметрів, швидкості внутрішніх периметрів і максимальної швидкості друку у вашому профілі (зазвичай це розріджене або суцільне заповнення). Потім повторіть тест для тих самих швидкостей на мінімальному та максимальному значенні прискорення друку, але не вище за рекомендоване максимальне прискорення, визначене в Klipper input shaper.\n" "2. Запишіть оптимальне значення PA для кожної обʼємної швидкості подачі та прискорення. Ви можете знайти значення подачі, вибравши \"Flow\" у випадаючому списку колірної схеми та пересуваючи горизонтальний повзунок по лініях шаблону PA. Значення повинне відображатися внизу сторінки. Ідеальне значення PA має зменшуватися зі збільшенням обʼємної швидкості подачі. Якщо це не так, переконайтеся, що ваш екструдер працює коректно. Чим повільніше друкуєте і з меншим прискоренням, тим ширший діапазон допустимих значень PA. Якщо різниця не помітна, використовуйте значення PA із швидшого тесту.\n" "3. Введіть трійки значень PA, Flow і Acceleration у це текстове поле та збережіть профіль філамента." # AI Translated msgid "Enable adaptive pressure advance within features (beta)" msgstr "Увімкнути адаптивне випередження тиску всередині елементів (бета)" # AI Translated msgid "" "Enable adaptive PA whenever there are flow changes in a feature, such as line width changes in a corner or overhangs.\n" "\n" "Not compatible with Prusa printers as they pause to process PA changes, which causes delays and defects.\n" "\n" "This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues." msgstr "" "Вмикати адаптивний PA щоразу, коли в елементі змінюється потік, наприклад при зміні ширини лінії в кутку або на нависаннях.\n" "\n" "Несумісно з принтерами Prusa, оскільки вони роблять паузу для обробки змін PA, що спричиняє затримки та дефекти.\n" "\n" "Це експериментальна опція: якщо профіль PA налаштовано неточно, це спричинить проблеми з однорідністю." # AI Translated msgid "Static pressure advance for bridges" msgstr "Статичне випередження тиску для мостів" # AI Translated msgid "" "Static pressure advance value for bridges. Set to 0 to apply the same pressure advance as \n" "equivalent walls (using adaptive settings if enabled).\n" "\n" "A lower PA value when printing bridges helps reduce the appearance of slight under-extrusion immediately after bridges. This is caused by the pressure drop in the nozzle when printing in the air and a lower PA helps counteract this." msgstr "" "Статичне значення випередження тиску для мостів. Встановіть 0, щоб застосувати таке саме випередження тиску, як для \n" "еквівалентних стінок (з адаптивними налаштуваннями, якщо їх увімкнено).\n" "\n" "Нижче значення PA під час друку мостів допомагає зменшити прояв незначної недостатньої екструзії одразу після мостів. Вона спричинена падінням тиску в соплі під час друку в повітрі, і нижчий PA допомагає це компенсувати." msgid "Default line width if other line widths are set to 0. If expressed as a %, it will be computed over the nozzle diameter." msgstr "Ширина лінії за замовчуванням, якщо інші ширини ліній встановлено на 0. Якщо виражено у %, вона буде розрахована за діаметром сопла." msgid "Keep fan always on" msgstr "Тримати вентилятор завжди увімкненим" # AI Translated msgid "Enabling this setting means that part cooling fan will never stop entirely and will instead run at least at minimum speed to reduce the frequency of starting and stopping." msgstr "Якщо увімкнути цей параметр, вентилятор охолодження деталей ніколи не зупинятиметься повністю, а працюватиме принаймні на мінімальній швидкості, щоб зменшити частоту пусків та зупинок" msgid "Don't slow down outer walls" msgstr "Не сповільнюватись на зовнішніх стінках" msgid "" "If enabled, this setting will ensure external perimeters are not slowed down to meet the minimum layer time. This is particularly helpful in the below scenarios:\n" "1. To avoid changes in shine when printing glossy filaments\n" "2. To avoid changes in external wall speed which may create slight wall artifacts that appear like Z banding\n" "3. To avoid printing at speeds which cause VFAs (fine artifacts) on the external walls" msgstr "" "Якщо увімкнено, цей параметр гарантуватиме, що зовнішні периметри не сповільнюються для дотримання мінімального часу шару. Це особливо корисно в наступних випадках:\n" "1. Для запобігання змінам блиску під час друку глянцевими філаментами\n" "2. Щоб уникнути змін у швидкості друку зовнішніх стінок, які можуть спричинити незначні дефекти, схожі на Z-ефект\n" "3. Щоб уникнути друку на швидкостях, які спричиняють VFAs (дрібні артефакти) на зовнішніх стінках" msgid "Layer time" msgstr "Час шару" # AI Translated msgid "The part cooling fan will be enabled for layers where the estimated time is shorter than this value. Fan speed is interpolated between the minimum and maximum fan speeds according to layer printing time." msgstr "Вентилятор охолодження деталей вмикається для шарів, розрахунковий час яких менший за це значення. Швидкість вентилятора інтерполюється між мінімальною та максимальною швидкістю вентилятора відповідно до часу друку шару" # AI Translated msgctxt "second" msgid "s" msgstr "с" msgid "Default color" msgstr "Типовий колір" msgid "" "Default filament color.\n" "Right click to reset value to system default." msgstr "" "Типовий колір філаменту.\n" "Праве клацання скидає значення до системного." msgid "Filament notes" msgstr "Примітки щодо філаменту" msgid "You can put your notes regarding the filament here." msgstr "Ви можете залишити свої примітки щодо філаменту тут." msgid "Required nozzle HRC" msgstr "Потрібний HRC сопла" msgid "Minimum HRC of nozzle required to print the filament. A value of 0 means no checking of the nozzle's HRC." msgstr "Мінімальний HRC сопла, необхідний для друку філаменту. Нуль означає відсутність перевірки HRC сопла." # AI Translated msgid "Filament map to extruder" msgstr "Зіставлення філаменту з екструдером" # AI Translated msgid "Filament map to extruder." msgstr "Зіставлення філаменту з екструдером." # AI Translated msgid "Auto For Flush" msgstr "Авто для промивки" # AI Translated msgid "Auto For Match" msgstr "Авто для відповідності" msgid "Nozzle Manual" msgstr "Ручне сопло" msgid "Flush temperature" msgstr "Температура змивання" # AI Translated msgid "Temperature when flushing filament. 0 indicates the upper bound of the recommended nozzle temperature range." msgstr "Температура під час промивки філаменту. 0 означає верхню межу рекомендованого діапазону температур сопла." msgid "Flush temperature used in fast purge mode." msgstr "Температура змивання, що використовується у режимі швидкого очищення." msgid "Flush volumetric speed" msgstr "Швидкість обʼємного змивання" # AI Translated msgid "Volumetric speed when flushing filament. 0 indicates the max volumetric speed." msgstr "Обʼємна швидкість під час промивки філаменту. 0 означає максимальну обʼємну швидкість." msgid "This setting is the volume of filament that can be melted and extruded per second. Printing speed is limited by max volumetric speed, in case of too high and unreasonable speed setting. This value cannot be zero." msgstr "Це налаштування визначає, скільки обсягу нитки може бути розплавлено та екструдовано за секунду. Швидкість друку обмежена максимальною обʼємною швидкістю, у разі надто високого та необґрунтованого налаштування швидкості. Не може бути нулем" msgid "Filament load time" msgstr "Час завантаження філаменту" msgid "Time to load new filament when switch filament. It's usually applicable for single-extruder multi-material machines. For tool changers or multi-tool machines, it's typically 0. For statistics only." msgstr "Час завантаження нового філамента при його зміні. Зазвичай застосовується для одноекструдерних принтерів з підтримкою багатоматеріального друку. Для систем із заміною інструментів або багатоголовкових машин зазвичай дорівнює 0. Використовується лише для статистики" msgid "Filament unload time" msgstr "Час вивантаження філаменту" msgid "Time to unload old filament when switch filament. It's usually applicable for single-extruder multi-material machines. For tool changers or multi-tool machines, it's typically 0. For statistics only." msgstr "Час вивантаження старого філаменту під час зміни філаменту. Зазвичай застосовується для одноекструдерних багатоматеріальних машин. Для змінників інструментів або багатоголовкових машин зазвичай становить 0. Використовується лише для статистики" msgid "Tool change time" msgstr "Час зміни інструмента" msgid "Time taken to switch tools. It's usually applicable for tool changers or multi-tool machines. For single-extruder multi-material machines, it's typically 0. For statistics only." msgstr "Час, необхідний для перемикання інструментів. Зазвичай застосовується для змінників інструментів або багатофункціональних машин. Для одноекструдерних машин з підтримкою кількох матеріалів зазвичай становить 0. Використовується лише для статистики" msgid "Bed temperature type" msgstr "Тип температури стола" # AI Translated msgid "This option determines how the bed temperature is set during slicing: based on the temperature of the first filament or the highest temperature of the printed filaments." msgstr "Ця опція визначає, як під час нарізки задається температура столу: за температурою першого філаменту чи за найвищою температурою серед використаних філаментів." msgid "By First filament" msgstr "За першим філаментом" msgid "By Highest Temp" msgstr "За вищою температурою" msgid "Filament diameter is used to calculate extrusion variables in G-code, so it is important that this is accurate and precise." msgstr "Діаметр філаменту використовується для розрахунку екструзії в gcode, тому він важливий і має бути точним" msgid "Pellet flow coefficient" msgstr "Коефіцієнт потоку гранул" msgid "" "Pellet flow coefficient is empirically derived and allows for volume calculation for pellet printers.\n" "\n" "Internally it is converted to filament_diameter. All other volume calculations remain the same.\n" "\n" "filament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )" msgstr "" "Коефіцієнт потоку гранул визначається емпірично і дозволяє виконувати розрахунок обʼєму для гранульних принтерів.\n" "\n" "Внутрішньо він конвертується у діаметр філамента. Всі інші розрахунки обʼєму залишаються незмінними.\n" "\n" "filament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )" # AI Translated msgid "Adaptive volumetric speed" msgstr "Адаптивна обʼємна швидкість" # AI Translated msgid "" "When enabled, the extrusion flow is limited by the smaller of the fitted value (calculated from line width and layer height) and the user-defined maximum flow. When disabled, only the user-defined maximum flow is applied.\n" "\n" "Note: Experimental and incomplete feature imported from BBS. Functional for some profiles that already have the variable saved." msgstr "" "Якщо увімкнено, потік екструзії обмежується меншим із двох значень: підібраним (обчисленим за шириною лінії та висотою шару) і заданим користувачем максимальним потоком. Якщо вимкнено, застосовується лише заданий користувачем максимальний потік.\n" "\n" "Примітка: експериментальна та незавершена функція, імпортована з BBS. Працює для деяких профілів, у яких уже збережено цю змінну." # AI Translated msgid "Max volumetric speed multinomial coefficients" msgstr "Поліноміальні коефіцієнти максимальної обʼємної швидкості" msgid "Shrinkage (XY)" msgstr "Усадка (XY)" # AI Translated #, no-c-format, no-boost-format msgid "" "Enter the shrinkage percentage that the filament will get after cooling (94% if you measure 94mm instead of 100mm). The part will be scaled in XY to compensate. For multi-material prints, ensure filament shrinkage matches across all used filaments\n" "Be sure to allow enough space between objects, as this compensation is done after the checks." msgstr "" "Введіть відсоток усадки, який отримає філамент після охолодження (94%, якщо ви вимірюєте 94 мм замість 100 мм). Деталь буде масштабовано у XY для компенсації. Для друку кількома матеріалами переконайтеся, що усадка збігається для всіх використаних філаментів\n" "Залиште достатньо місця між обʼєктами, оскільки ця компенсація виконується після перевірок." msgid "Shrinkage (Z)" msgstr "Усадка (Z)" #, no-c-format, no-boost-format msgid "Enter the shrinkage percentage that the filament will get after cooling (94% if you measure 94mm instead of 100mm). The part will be scaled in Z to compensate." msgstr "Введіть відсоток усадки, якого зазнає філамент після охолодження (94%, якщо виміряне значення становить 94 мм замість 100 мм). Деталь буде масштабована по осі Z для компенсації." # AI Translated msgid "Adhesiveness Category" msgstr "Категорія адгезії" msgid "Filament category." msgstr "Категорія філаменту." msgid "Loading speed" msgstr "Швидкість завантаження" msgid "Speed used for loading the filament on the wipe tower." msgstr "Швидкість, що використовується для видавлення філаменту на вежу протирання." msgid "Loading speed at the start" msgstr "Швидкість завантаження на старті" msgid "Speed used at the very beginning of loading phase." msgstr "Швидкість, що використовується на самому початку фази заведення." msgid "Unloading speed" msgstr "Швидкість вивантаження" msgid "Speed used for unloading the filament on the wipe tower (does not affect initial part of unloading just after ramming)." msgstr "Швидкість, яка використовується для видавлення філаменту на вежі протирання (не впливає на початкову частину виведення безпосередньо після раммінгу)." msgid "Unloading speed at the start" msgstr "Швидкість вивантаження на старті" msgid "Speed used for unloading the tip of the filament immediately after ramming." msgstr "Швидкість, яка використовується для виведення кінчику філаменту безпосередньо після раммінгу." msgid "Delay after unloading" msgstr "Затримка після виведення" msgid "Time to wait after the filament is unloaded. May help to get reliable tool changes with flexible materials that may need more time to shrink to original dimensions." msgstr "Час очікування після виведення філаменту. Може допомогти отримати надійну заміну інструменту для гнучких матеріалів, яким може знадобитися більше часу, щоб зменшитись до початкових розмірів." msgid "Number of cooling moves" msgstr "Кількість охолоджуючих рухів" msgid "Filament is cooled by being moved back and forth in the cooling tubes. Specify desired number of these moves." msgstr "Філамент охолоджується шляхом переміщення вперед-назад у охолоджувальних трубках. Вкажіть бажану кількість цих рухів." msgid "Stamping loading speed" msgstr "Швидкість завантаження штампування" msgid "Speed used for stamping." msgstr "Швидкість, що використовується для штампування." msgid "Stamping distance measured from the center of the cooling tube" msgstr "Відстань штампування, виміряна від центру охолоджувальної трубки" msgid "If set to non-zero value, filament is moved toward the nozzle between the individual cooling moves (\"stamping\"). This option configures how long this movement should be before the filament is retracted again." msgstr "Якщо встановлено ненульове значення, філамент подається до сопла між окремими рухами охолодження (\"штампування\"). Цей параметр визначає, як довго має тривати цей рух, перш ніж філамент буде знову втягнутий." msgid "Speed of the first cooling move" msgstr "Швидкість першого охолоджуючого руху" msgid "Cooling moves are gradually accelerating beginning at this speed." msgstr "Охолоджувальні рухи поступово прискорюються, починаючи з цієї швидкості." msgid "Minimal purge on wipe tower" msgstr "Мінімальне очищення на вежі протирання" msgid "After a tool change, the exact position of the newly loaded filament inside the nozzle may not be known, and the filament pressure is likely not yet stable. Before purging the print head into an infill or a sacrificial object, Orca Slicer will always prime this amount of material into the wipe tower to produce successive infill or sacrificial object extrusions reliably." msgstr "Після заміни інструменту точне положення новонавантаженої нитки напруженнявсередині сопла може бути невідомо, і тиск нитки розжарення, ймовірно, ще неє стабільним. Перед продуванням друкувальної головки в наповнювач або обʼєкт Orca Slicer, що витрачається, завжди буде дозувати цю кількість матеріалу в вежу для протирання, щоб забезпечити надійне послідовне заповненняабо видавлювання обʼєкта, що витрачається." # AI Translated msgid "Wipe tower cooling" msgstr "Охолодження вежі протирання" # AI Translated msgid "Temperature drop before entering filament tower" msgstr "Зниження температури перед входом у вежу філаменту" # AI Translated msgid "Interface layer pre-extrusion distance" msgstr "Відстань попередньої екструзії інтерфейсного шару" # AI Translated msgid "Pre-extrusion distance for prime tower interface layer (where different materials meet)." msgstr "Відстань попередньої екструзії для інтерфейсного шару підготовчої вежі (де зустрічаються різні матеріали)." # AI Translated msgid "Interface layer pre-extrusion length" msgstr "Довжина попередньої екструзії інтерфейсного шару" # AI Translated msgid "Pre-extrusion length for prime tower interface layer (where different materials meet)." msgstr "Довжина попередньої екструзії для інтерфейсного шару підготовчої вежі (де зустрічаються різні матеріали)." # AI Translated msgid "Tower ironing area" msgstr "Область розгладжування вежі" # AI Translated msgid "Ironing area for prime tower interface layer (where different materials meet)." msgstr "Область розгладжування для інтерфейсного шару підготовчої вежі (де зустрічаються різні матеріали)." msgid "mm²" msgstr "мм²" # AI Translated msgid "Interface layer purge length" msgstr "Довжина очищення інтерфейсного шару" # AI Translated msgid "Purge length for prime tower interface layer (where different materials meet)." msgstr "Довжина очищення для інтерфейсного шару підготовчої вежі (де зустрічаються різні матеріали)." # AI Translated msgid "Interface layer print temperature" msgstr "Температура друку інтерфейсного шару" # AI Translated msgid "Print temperature for prime tower interface layer (where different materials meet). If set to -1, use max recommended nozzle temperature." msgstr "Температура друку для інтерфейсного шару підготовчої вежі (де зустрічаються різні матеріали). Якщо встановлено -1, використовується максимальна рекомендована температура сопла." msgid "Speed of the last cooling move" msgstr "Швидкість останнього охолоджуючого руху" msgid "Cooling moves are gradually accelerating towards this speed." msgstr "Охолоджувальні рухи поступово прискорюються до цієї швидкості." msgid "Ramming parameters" msgstr "Параметри раммінгу" msgid "This string is edited by RammingDialog and contains ramming specific parameters." msgstr "Цей рядок відредаговано у діалогу налаштувань раммінгу та містить певні параметри раммінгу." msgid "Enable ramming for multi-tool setups" msgstr "Увімкнути накат для багатоінструментальних установок" msgid "Perform ramming when using multi-tool printer (i.e. when the 'Single Extruder Multimaterial' in Printer Settings is unchecked). When checked, a small amount of filament is rapidly extruded on the wipe tower just before the tool change. This option is only used when the wipe tower is enabled." msgstr "Виконати накат при використанні багатофункціонального принтера (тобто, коли в налаштуваннях принтера знято прапорець з опції \"Мультиматеріал для одного екструдера\"). Якщо ця опція встановлена, невелика кількість нитки швидко екструдується на витиральні башти безпосередньо перед зміною інструменту. Цей параметр використовується лише тоді, коли увімкнено витиральні башти." msgid "Multi-tool ramming volume" msgstr "Обʼєм накату багатофункціонального інструменту" msgid "The volume to be rammed before the tool change." msgstr "Обʼєм, який потрібно виштовхнути перед зміною інструменту." msgid "Multi-tool ramming flow" msgstr "Багатоінструментальний потік накату" msgid "Flow used for ramming the filament before the tool change." msgstr "Потік використовується для накату нитки перед зміною інструменту." msgid "Density" msgstr "Щільність" msgid "Filament density, for statistical purposes only." msgstr "Щільність філаменту. Тільки для статистики" msgid "g/cm³" msgstr "г/см³" msgid "Filament material type" msgstr "Тип матеріалу філаменту" msgid "Soluble material" msgstr "Розчинний матеріал" msgid "Soluble material is commonly used to print supports and support interfaces." msgstr "Розчинний матеріал зазвичай використовується для друку підтримки" # AI Translated msgid "Filament ramming length" msgstr "Довжина раммінгу філаменту" # AI Translated msgid "When changing the extruder, it is recommended to extrude a certain length of filament from the original extruder. This helps minimize nozzle oozing." msgstr "Під час зміни екструдера рекомендується екструдувати певну довжину філаменту з початкового екструдера. Це допомагає мінімізувати витікання із сопла." msgid "Support material" msgstr "Матеріал підтримки" msgid "Support material is commonly used to print supports and support interfaces." msgstr "Допоміжний матеріал зазвичай використовується для друку підтримки" # AI Translated msgid "Is mixed filament" msgstr "Є змішаним філаментом" # AI Translated msgid "Whether this filament slot is a mixed filament composed of multiple physical filaments" msgstr "Визначає, чи є цей слот філаменту змішаним філаментом, складеним з кількох фізичних філаментів" # AI Translated msgid "Mixed filament components" msgstr "Компоненти змішаного філаменту" # AI Translated msgid "Comma-separated 1-based indices of component filaments, e.g. \"1,3\"" msgstr "Розділені комами індекси філаментів-компонентів, починаючи з 1, наприклад \"1,3\"" # AI Translated msgid "Mixed filament sublayer ratios" msgstr "Частки підшарів змішаного філаменту" # AI Translated msgid "Comma-separated ratio values summing to 1.0, e.g. \"0.7,0.3\"" msgstr "Розділені комами значення часток, сума яких дорівнює 1.0, наприклад \"0.7,0.3\"" # AI Translated msgid "Mixed filament gradient" msgstr "Градієнт змішаного філаменту" # AI Translated msgid "Enable Z-direction gradient mode for mixed filament sub-layers. When enabled, the sub-layer ratios vary linearly across layers." msgstr "Вмикає режим градієнта за віссю Z для підшарів змішаного філаменту. Коли увімкнено, частки підшарів змінюються лінійно від шару до шару." # AI Translated msgid "Mixed filament gradient range" msgstr "Діапазон градієнта змішаного філаменту" # AI Translated msgid "Start and end ratios for the first component in gradient mode. Comma-separated pair, e.g. \"0.10,0.90\" means 10% to 90%." msgstr "Початкова та кінцева частки першого компонента в режимі градієнта. Пара значень через кому, наприклад \"0.10,0.90\" означає від 10% до 90%." # AI Translated msgid "Mixed filament gradient curve" msgstr "Крива градієнта змішаного філаменту" # AI Translated msgid "Optional Photoshop-style custom curve mapping Z progress to the first component ratio. Encoded as pipe-separated control points, either \"x,y\" (legacy) or \"x,y,m_in,m_out\" when a tangent override is needed (empty token or \"nan\" means use PCHIP default). x in [0,1]; y is clamped to the configured ratio range, e.g. \"0,0.15|0.5,0.50|1,0.85\". When empty, the linear gradient_range is used instead." msgstr "Необовʼязкова власна крива у стилі Photoshop, що зіставляє поступ за віссю Z із часткою першого компонента. Записується як контрольні точки, розділені вертикальними рисками, у вигляді \"x,y\" (застарілий формат) або \"x,y,m_in,m_out\", коли потрібно перевизначити дотичну (порожнє значення або \"nan\" означає типове значення PCHIP). x належить до [0,1]; y обмежується налаштованим діапазоном часток, наприклад \"0,0.15|0.5,0.50|1,0.85\". Якщо поле порожнє, замість цього використовується лінійний gradient_range." # AI Translated msgid "Mixed filament per-part gradient" msgstr "Градієнт змішаного філаменту для кожної частини" # AI Translated msgid "When gradient mode is enabled, apply the gradient to each part of an assembly independently rather than treating the whole assembly as one Z range." msgstr "Коли режим градієнта увімкнено, градієнт застосовується до кожної частини збірки окремо, а не до всієї збірки як до єдиного діапазону Z." msgid "Filament printable" msgstr "Філамент придатний для друку" msgid "The filament is printable in extruder." msgstr "Філамент придатний для друку в екструдері" msgid "Filament-extruder compatibility" msgstr "Сумісність екструдера філаменту" # AI Translated msgid "A single 32-bit int encoding the compatibility level of a filament across all extruders (up to 10). Every 3 bits represent one extruder (bits [3*i, 3*i+2] for extruder i). 0: printable, 1: error, 2: critical warning, 3: warning, 4-7: reserved." msgstr "Одне 32-бітне ціле число, що кодує рівень сумісності філаменту для всіх екструдерів (до 10). Кожні 3 біти відповідають одному екструдеру (біти [3*i, 3*i+2] для екструдера i). 0: придатний до друку, 1: помилка, 2: критичне попередження, 3: попередження, 4-7: зарезервовано." msgid "Softening temperature" msgstr "Температура розмʼякшення" msgid "The material softens at this temperature, so when the bed temperature is equal to or greater than this, it's highly recommended to open the front door and/or remove the upper glass to avoid clogs." msgstr "Матеріал м’якшує при цій температурі, тому, коли температура столу рівна або вища за цей показник, настійно рекомендується відкрити передні двері та/або видалити верхнє скло, щоб уникнути засмічення (clogging)." msgid "Price" msgstr "Ціна" msgid "Filament price, for statistical purposes only." msgstr "Ціна філаменту. Тільки для статистики" msgid "money/kg" msgstr "грн/кг" msgid "Vendor" msgstr "Виробник" msgid "Vendor of filament. For show only." msgstr "Виробник філаменту. Для показу, тільки для відображення" msgid "(Undefined)" msgstr "(Невизначений)" msgid "Sparse infill direction" msgstr "Напрямок часткового заповнення" msgid "This is the angle for sparse infill pattern, which controls the start or main direction of lines." msgstr "Кут для часткового заповнення, який контролює початок або основний напрямок лінії" msgid "Solid infill direction" msgstr "Напрямок cуцільного заповнення" msgid "Angle for solid infill pattern, which controls the start or main direction of line." msgstr "Кут шаблону суцільного заповнення, який контролює початок або основний напрямок лінії" msgid "Top layer direction" msgstr "Напрямок верхнього шару" # AI Translated msgid "" "Fixed angle for the top solid infill and ironing lines.\n" "Set to -1 to follow the default solid infill direction." msgstr "" "Фіксований кут для верхнього суцільного заповнення та ліній розгладжування.\n" "Встановіть -1, щоб використовувати типовий напрямок суцільного заповнення." msgid "Bottom layer direction" msgstr "Напрямок нижнього шару" # AI Translated msgid "" "Fixed angle for the bottom solid infill lines.\n" "Set to -1 to follow the default solid infill direction." msgstr "" "Фіксований кут для ліній нижнього суцільного заповнення.\n" "Встановіть -1, щоб використовувати типовий напрямок суцільного заповнення." msgid "Sparse infill density" msgstr "Щільність часткового заповнення" #, no-c-format, no-boost-format msgid "Density of internal sparse infill, 100% turns all sparse infill into solid infill and internal solid infill pattern will be used." msgstr "Щільність внутрішнього часткового заповнення, 100% перетворює все часткове заповнення на суцільне заповнення, і буде застосовано шаблон внутрішнього суцільного заповнення" msgid "Align directions to model" msgstr "Напрямки вирівнювання моделі" # AI Translated msgid "" "Aligns infill, bridge, ironing, and top/bottom surface directions to follow the model's orientation on the build plate.\n" "When enabled, these directions rotate together with the model so the printed features keep their intended orientation relative to the part, preserving optimal strength and surface characteristics regardless of how the model is placed." msgstr "" "Вирівнює напрямки заповнення, мостів, розгладжування та верхніх/нижніх поверхонь відповідно до орієнтації моделі на столі.\n" "Якщо увімкнено, ці напрямки обертаються разом з моделлю, тож надруковані елементи зберігають задану орієнтацію відносно деталі, зберігаючи оптимальну міцність і характеристики поверхні незалежно від розміщення моделі." # AI Translated msgid "Insert solid layers" msgstr "Вставляти суцільні шари" # AI Translated msgid "Insert solid infill at specific layers. Use N to insert every Nth layer, N#K to insert K consecutive solid layers every N layers (K is optional, e.g. '5#' equals '5#1'), or a comma-separated list (e.g. 1,7,9) to insert at explicit layers. Layers are 1-based." msgstr "Вставляти суцільне заповнення на певних шарах. Використовуйте N, щоб вставляти кожен N-й шар, N#K — щоб вставляти K послідовних суцільних шарів кожні N шарів (K необовʼязковий, наприклад '5#' дорівнює '5#1'), або список через кому (наприклад, 1,7,9) для вставки на явно вказаних шарах. Нумерація шарів починається з 1." # AI Translated msgid "Fill Multiline" msgstr "Багатолінійне заповнення" # AI Translated msgid "Using multiple lines for the infill pattern, if supported by infill pattern." msgstr "Використання кількох ліній для шаблону заповнення, якщо шаблон це підтримує." # AI Translated msgid "Z-buckling bias optimization (experimental)" msgstr "Оптимізація зміщення проти Z-вигинання (експериментально)" # AI Translated #, no-c-format, no-boost-format msgid "Tightens the gyroid wave along the Z (vertical) axis at low infill density to shorten the effective vertical column length and improve Z-axis compression buckling resistance. Filament use is preserved. No effect at ~30% sparse infill density and above. Only applies when Sparse infill pattern is set to Gyroid." msgstr "Стискає гіроїдну хвилю вздовж осі Z (вертикальної) за низької щільності заповнення, щоб скоротити ефективну довжину вертикальної колони та підвищити стійкість до вигинання при стисканні по осі Z. Витрата філаменту зберігається. Не діє за щільності часткового заповнення близько 30% і вище. Застосовується лише тоді, коли шаблоном часткового заповнення обрано Гіроїд." msgid "Sparse infill pattern" msgstr "Шаблон часткового заповнення" msgid "This is the line pattern for internal sparse infill." msgstr "Шаблон ліній внутрішнього часткового заповнення" msgid "Zig Zag" msgstr "Зіг-Заг" # AI Translated msgid "Cross Zag" msgstr "Перехресний зигзаг" # AI Translated msgid "Locked Zag" msgstr "Зафіксований зигзаг" msgid "Line" msgstr "Лінія" msgid "Grid" msgstr "Сітка" msgid "Tri-hexagon" msgstr "Зірки" msgid "Cubic" msgstr "Кубічний" msgid "Adaptive Cubic" msgstr "Адаптивний кубічний" msgid "Quarter Cubic" msgstr "Четверть Куба" msgid "Support Cubic" msgstr "Підтримуючий кубічний" msgid "Lightning" msgstr "Блискавка" msgid "Honeycomb" msgstr "Медові стільники" msgid "3D Honeycomb" msgstr "Медові стільники 3D" # AI Translated msgid "Lateral Honeycomb" msgstr "Бічні медові стільники" msgid "Lateral Lattice" msgstr "2D Решітка" msgid "Cross Hatch" msgstr "Перехресний штрих" msgid "TPMS-D" msgstr "TPMS-D" msgid "TPMS-FK" msgstr "TPMS-FK" msgid "Gyroid" msgstr "Гіроїд" # AI Translated msgid "Sparse infill smooth factor" msgstr "Коефіцієнт згладжування часткового заповнення" # AI Translated msgid "Controls how strongly sparse infill corners are rounded. 0% keeps the original sharp path, while 100% produces the largest possible curves between adjacent infill lines." msgstr "Визначає, наскільки сильно заокруглюються кути часткового заповнення. 0% зберігає початкову траєкторію з гострими кутами, а 100% створює максимально можливі заокруглення між сусідніми лініями заповнення." msgid "This is the acceleration of top surface infill. Using a lower value may improve top surface quality." msgstr "Прискорення заповнення верхньої поверхні. Використання меншого значенняможе покращити якість верхньої поверхні" msgid "Acceleration of outer wall: using a lower value can improve quality." msgstr "Прискорення зовнішнього периметра. Використання меншого значення може поліпшити якість" msgid "Acceleration of inner walls." msgstr "Прискорення внутрішніх периметрів" msgid "Acceleration of sparse infill. If the value is expressed as a percentage (e.g. 100%), it will be calculated based on the default acceleration." msgstr "Прискорення заповнення. Якщо значення виражено у відсотках (наприклад, 100%), воно буде розраховане на основі прискорення за умовчанням." msgid "Acceleration of internal solid infill. If the value is expressed as a percentage (e.g. 100%), it will be calculated based on the default acceleration." msgstr "Прискорення заповнення внутрішнього твердого тіла. Якщо значення виражено в процентах (наприклад, 100%), воно буде розраховане на основі прискорення по за замовчуванням." msgid "This is the printing acceleration for the first layer. Using limited acceleration can improve build plate adhesion." msgstr "Прискорення першого шару. Використання меншого значення може покращити прилипання до робочої пластини" msgid "Enable accel_to_decel" msgstr "Увімкнути прискорення до уповільнення" msgid "Klipper's max_accel_to_decel will be adjusted automatically." msgstr "Max \"прискорення до уповільнення\" для Klipper буде скориговано автоматично" msgid "accel_to_decel" msgstr "прискорення до уповільнення" #, c-format, boost-format msgid "Klipper's max_accel_to_decel will be adjusted to this %% of acceleration." msgstr "Klipper-ів max_accel_to_decel буде скориговано на цей %% прискорення" # AI Translated msgid "Default jerk." msgstr "Типовий Jerk." # AI Translated msgid "Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)." msgstr "Junction Deviation прошивки Marlin (замінює традиційне налаштування Jerk XY)." msgid "Jerk of outer walls." msgstr "Ривок зовнішніх периметрів" msgid "Jerk of inner walls." msgstr "Ривок внутрішніх периметрів" msgid "Jerk for top surface." msgstr "Ривок для верхньої поверхні" msgid "Jerk for infill." msgstr "Ривок для заповнення" msgid "Jerk for the first layer." msgstr "Ривок для першого шару" msgid "Jerk for travel." msgstr "Ривок для переміщення" # AI Translated msgid "" "Travel jerk of first layer.\n" "The percentage value is relative to Travel Jerk." msgstr "" "Jerk переміщення першого шару.\n" "Відсоткове значення задається відносно Jerk переміщення." msgid "Line width of the first layer. If expressed as a %, it will be computed over the nozzle diameter." msgstr "Ширина лінії першого шару. Якщо виражена у %, вона буде розрахована по діаметру сопла." msgid "First layer height" msgstr "Висота першого шару" msgid "Height of the first layer. Making the first layer height thicker can improve build plate adhesion." msgstr "Висота першого шару. Невелике збільшення висоти першого шару може покращити прилипання до робочої пластини" msgid "This is the speed for the first layer except for solid infill sections." msgstr "Швидкість першого шару, за винятком зони суцільного заповнення" msgid "First layer infill" msgstr "Заповнення першого шару" msgid "This is the speed for solid infill parts of the first layer." msgstr "Швидкість зони суцільного заповнення першого шару" msgid "First layer travel speed" msgstr "Швидкість переміщення першого шару" msgid "Travel speed of the first layer." msgstr "Швидкість переміщення першого шару" msgid "Number of slow layers" msgstr "Кількість повільних шарів" msgid "The first few layers are printed slower than normal. The speed is gradually increased in a linear fashion over the specified number of layers." msgstr "Перші кілька шарів друкуються повільніше, ніж зазвичай. Швидкість поступовозбільшується лінійним чином за заданою кількістю шарів." msgid "First layer nozzle temperature" msgstr "Температура сопла першого шару" msgid "Nozzle temperature for printing the first layer with this filament" msgstr "Температура сопла для друку першого шару під час використання цього філаменту" msgid "Full fan speed at layer" msgstr "Повна швидкість вентилятора на шарі" msgid "Fan speed will be ramped up linearly from zero at layer \"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower than \"close_fan_the_first_x_layers\", in which case the fan will be running at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." msgstr "Швидкість вентилятора лінійно збільшується від нуля на рівні«close_fan_the_first_x_layers» до максимуму на рівні «full_fan_speed_layer.». «full_fan_speed_layer» буде ігноруватися, якщо нижче «close_fan_the_first_x_layers,», в цьому випадку вентилятор буде працювати з максимально допустимою швидкістю на рівні«close_fan_the_first_x_layers» + 1." msgid "layer" msgstr "шар" # AI Translated msgid "First layer fan speed" msgstr "Швидкість вентилятора першого шару" # AI Translated msgid "" "Sets an exact fan speed for the first layer, overriding all other cooling settings. Useful for protecting 3D-printed toolhead parts (e.g. Voron-style ABS/ASA ducts) from a hot bed. A small amount of airflow cools the ducts down, without using full cooling that may in certain conditions hurt first-layer adhesion.\n" "From the second layer onwards, normal cooling resumes.\n" "If \"Full fan speed at layer\" is also set, the fan ramps smoothly from this value on the first layer up to your target by the chosen layer.\n" "Only available when \"No cooling for the first\" is 0.\n" "Set to -1 to disable it." msgstr "" "Задає точну швидкість вентилятора для першого шару, перевизначаючи всі інші налаштування охолодження. Корисно для захисту надрукованих на 3D-принтері деталей головки (наприклад, повітроводів з ABS/ASA у стилі Voron) від гарячого столу. Невеликий потік повітря охолоджує повітроводи, не вмикаючи повне охолодження, яке за певних умов може погіршити зчеплення першого шару.\n" "Починаючи з другого шару, поновлюється звичайне охолодження.\n" "Якщо також задано \"Повна швидкість вентилятора на шарі\", вентилятор плавно нарощує швидкість від цього значення на першому шарі до вашої цільової на вибраному шарі.\n" "Доступно лише тоді, коли \"Без охолодження для перших\" дорівнює 0.\n" "Встановіть -1, щоб вимкнути." msgid "Support interface fan speed" msgstr "Швидкість вентилятора під час друку підтримки" msgid "" "This part cooling fan speed is applied when printing support interfaces. Setting this parameter to a higher than regular speed reduces the layer binding strength between supports and the supported part, making them easier to separate.\n" "Set to -1 to disable it.\n" "This setting is overridden by disable_fan_first_layers." msgstr "" "Ця швидкість вентилятора охолодження деталі застосовується під час друку інтерфейсів підтримки. Встановлення цього параметра на вищу за звичайну швидкість зменшує міцність зчеплення між підтримками та деталлю, що підтримується, полегшуючи їх розділення.\n" "Встановіть -1, щоб вимкнути.\n" "Цей параметр перевизначається налаштуванням disable_fan_first_layers." msgid "Internal bridges fan speed" msgstr "Швидкість вентилятора внутрішніх мостів" msgid "" "The part cooling fan speed used for all internal bridges. Set to -1 to use the overhang fan speed settings instead.\n" "\n" "Reducing the internal bridges fan speed, compared to your regular fan speed, can help reduce part warping due to excessive cooling applied over a large surface for a prolonged period of time." msgstr "" "Швидкість вентилятора охолодження деталі, що використовується для всіх внутрішніх мостів. Встановіть -1, щоб замість цього використовувати налаштування швидкості вентилятора для нависань.\n" "\n" "Зменшення швидкості вентилятора для внутрішніх мостів порівняно зі звичайною швидкістю вентилятора може допомогти знизити деформацію деталі, спричинену надмірним охолодженням великої площі протягом тривалого часу." # AI Translated msgid "Ironing fan speed" msgstr "Швидкість вентилятора при розгладжуванні" # AI Translated msgid "" "This part cooling fan speed is applied when ironing. Setting this parameter to a lower than regular speed reduces possible nozzle clogging due to the low volumetric flow rate, making the interface smoother.\n" "Set to -1 to disable it." msgstr "" "Ця швидкість вентилятора охолодження деталей застосовується під час розгладжування. Встановлення нижчого за звичайне значення зменшує ймовірність засмічення сопла через низьку обʼємну витрату та робить поверхню гладкішою.\n" "Встановіть -1, щоб вимкнути." msgid "Ironing flow" msgstr "Плавний потік" # AI Translated msgid "Filament-specific override for ironing flow. This allows you to customize the ironing flow for each filament type. Too high value results in overextrusion on the surface." msgstr "Специфічне для філаменту перевизначення потоку розгладжування. Це дає змогу налаштувати потік розгладжування для кожного типу філаменту. Завелике значення призводить до надлишкової екструзії на поверхні." msgid "Ironing line spacing" msgstr "Крок лінії розглажування" # AI Translated msgid "Filament-specific override for ironing line spacing. This allows you to customize the spacing between ironing lines for each filament type." msgstr "Специфічне для філаменту перевизначення інтервалу ліній розгладжування. Це дає змогу налаштувати відстань між лініями розгладжування для кожного типу філаменту." msgid "Ironing inset" msgstr "Вставка прасування" # AI Translated msgid "Filament-specific override for ironing inset. This allows you to customize the distance to keep from the edges when ironing for each filament type." msgstr "Специфічне для філаменту перевизначення відступу розгладжування. Це дає змогу налаштувати відстань, яку слід витримувати від країв під час розгладжування, для кожного типу філаменту." msgid "Ironing speed" msgstr "Швидкість розглажування" # AI Translated msgid "Filament-specific override for ironing speed. This allows you to customize the print speed of ironing lines for each filament type." msgstr "Специфічне для філаменту перевизначення швидкості розгладжування. Це дає змогу налаштувати швидкість друку ліній розгладжування для кожного типу філаменту." # AI Translated msgid "This setting makes the toolhead randomly jitter while printing walls so that the surface has a rough textured look. This setting controls the fuzzy position." msgstr "Цей параметр змушує друкувальну головку випадково тремтіти під час друку стінок, щоб поверхня мала шорсткий фактурний вигляд. Цей параметр керує розташуванням шорсткої поверхні" msgid "Painted only" msgstr "Тільки пофарбовані" msgid "Contour" msgstr "Контур" msgid "Hole" msgstr "Отвір" msgid "Contour and hole" msgstr "Контур та отвір" msgid "All walls" msgstr "Всі периметри" msgid "Fuzzy skin thickness" msgstr "Товщина Шорсткої Поверхні" # AI Translated msgid "The width of jittering: it’s recommended to keep this lower than the outer wall line width." msgstr "Ширина тремтіння: рекомендується тримати її меншою за ширину лінії зовнішньої стінки" msgid "Fuzzy skin point distance" msgstr "Відстань між точками Шорсткої Поверхні" msgid "The average distance between the random points introduced on each line segment." msgstr "Середня відстань між випадковими точками, введеними на кожному відрізкулінії" msgid "Apply fuzzy skin to first layer" msgstr "Застосувати Шорстку Поверхню до першого шару" msgid "Whether to apply fuzzy skin on the first layer." msgstr "Чи потрібно застосовувати Шорстку Поверхню до першого шару" msgid "Fuzzy skin generator mode" msgstr "Режим генератора шорсткої поверхні" # AI Translated #, c-format, boost-format msgid "" "Fuzzy skin generation mode. Works only with Arachne!\n" "Displacement: Сlassic mode when the pattern is formed by shifting the nozzle sideways from the original path.\n" "Extrusion: The mode when the pattern formed by the amount of extruded plastic. This is the fast and straight algorithm without unnecessary nozzle shake that gives a smooth pattern. But it is more useful for forming loose walls in the entire they array.\n" "Combined: Joint mode [Displacement] + [Extrusion]. The appearance of the walls is similar to [Displacement] Mode, but it leaves no pores between the perimeters.\n" "\n" "Attention! The [Extrusion] and [Combined] modes works only the fuzzy_skin_thickness parameter not more than the thickness of printed loop. At the same time, the width of the extrusion for a particular layer should also not be below a certain level. It is usually equal 15-25%% of a layer height. Therefore, the maximum fuzzy skin thickness with a perimeter width of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! If you enter a higher parameter than this, the error Flow::spacing() will displayed, and the model will not be sliced. You can choose this number until this error is repeated." msgstr "" "Режим створення шорсткої поверхні. Працює лише з Arachne!\n" "Зміщення: класичний режим, коли візерунок формується зміщенням сопла вбік від початкового шляху.\n" "Екструзія: режим, коли візерунок формується кількістю екструдованого пластику. Це швидкий і прямий алгоритм без зайвого тремтіння сопла, що дає рівний візерунок. Але він корисніший для формування вільних стінок в усьому їх масиві.\n" "Комбінований: спільний режим [Зміщення] + [Екструзія]. Вигляд стінок подібний до режиму [Зміщення], але між периметрами не залишається пор.\n" "\n" "Увага! Режими [Екструзія] та [Комбінований] працюють лише тоді, коли параметр fuzzy_skin_thickness не перевищує товщину надрукованої петлі. Водночас ширина екструзії для конкретного шару також не повинна бути нижчою за певний рівень. Зазвичай вона дорівнює 15-25%% висоти шару. Тому максимальна товщина шорсткої поверхні за ширини периметра 0.4 мм і висоти шару 0.2 мм становитиме 0.4-(0.2*0.25)=±0.35мм! Якщо ви введете більше значення, зʼявиться помилка Flow::spacing(), і модель не буде нарізано. Ви можете підбирати це число, доки помилка не перестане повторюватися." # AI Translated msgid "Displacement" msgstr "Зміщення" msgid "Extrusion" msgstr "Екструзія" msgid "Combined" msgstr "Обʼєднана" msgid "Fuzzy skin noise type" msgstr "Тип шуму Шорсткої Поверхні" # AI Translated msgid "" "Noise type to use for fuzzy skin generation:\n" "Classic: Classic uniform random noise.\n" "Perlin: Perlin noise, which gives a more consistent texture.\n" "Billow: Similar to perlin noise, but clumpier.\n" "Ridged Multifractal: Ridged noise with sharp, jagged features. Creates marble-like textures.\n" "Voronoi: Divides the surface into voronoi cells, and displaces each one by a random amount. Creates a patchwork texture.\n" "Ripple: Uniform ripple pattern that ripples left and right of the original path. Repeating pattern, woven appearance." msgstr "" "Тип шуму для створення шорсткої поверхні:\n" "Класичний: класичний рівномірний випадковий шум.\n" "Перлін: шум Перліна, що дає однорідніший рельєф.\n" "Хвильовий: подібний до шуму Перліна, але з більшими згустками.\n" "Гребеневий мультифрактал: гребеневий шум з різкими, зубчастими елементами. Створює мармурові текстури.\n" "Вороного: розділяє поверхню на комірки Вороного і зміщує кожну на випадкову величину. Створює клаптикову текстуру.\n" "Ripple: рівномірний хвилястий візерунок, що коливається ліворуч і праворуч від початкового шляху. Повторюваний візерунок з плетеним виглядом." msgid "Classic" msgstr "Класичний" msgid "Perlin" msgstr "Перлін" msgid "Billow" msgstr "Хвильовий" msgid "Ridged Multifractal" msgstr "Гребеневий мультифрактал" msgid "Voronoi" msgstr "Вороного" msgid "Ripple" msgstr "Ripple" msgid "Fuzzy skin feature size" msgstr "Розмір деталізації Шорсткої Поверхні" msgid "The base size of the coherent noise features, in mm. Higher values will result in larger features." msgstr "Базовий розмір характеристик когерентного шуму в міліметрах. Вищі значення призведуть до збільшення розміру особливостей." msgid "Fuzzy Skin Noise Octaves" msgstr "Октави шуму Шорсткої поверхні" msgid "The number of octaves of coherent noise to use. Higher values increase the detail of the noise, but also increase computation time." msgstr "Кількість октав когерентного шуму для використання. Вищі значення підвищують деталізацію шуму, але також збільшують час обчислень." msgid "Fuzzy skin noise persistence" msgstr "Постійність шуму Шорсткої поверхні" msgid "The decay rate for higher octaves of the coherent noise. Lower values will result in smoother noise." msgstr "Швидкість затухання для вищих октав когерентного шуму. Нижчі значення призведуть до більш згладженого шуму." # AI Translated msgid "Number of ripples per layer" msgstr "Кількість хвиль на шар" # AI Translated msgid "Controls how many full cycles of ripples will be added per layer." msgstr "Визначає, скільки повних циклів хвиль додається на кожен шар." # AI Translated msgid "Ripple offset" msgstr "Зсув хвилі" # AI Translated msgid "" "Shifts the ripple phase forward along the print path by the specified percentage of a wavelength each layer period.\n" "- 0% keeps every layer identical.\n" "- 50% shifts the pattern by half a wavelength, effectively inverting the phase.\n" "- 100% shifts the pattern by a full wavelength, returning to the original phase.\n" "\n" "The shift is applied once every number of layers set by Layers between ripple offset, so layers within the same group are printed identically." msgstr "" "Зсуває фазу хвилі вперед уздовж шляху друку на вказаний відсоток довжини хвилі за кожен період шарів.\n" "- 0% залишає кожен шар однаковим.\n" "- 50% зсуває візерунок на половину довжини хвилі, фактично інвертуючи фазу.\n" "- 100% зсуває візерунок на повну довжину хвилі, повертаючи початкову фазу.\n" "\n" "Зсув застосовується один раз на кількість шарів, задану параметром «Шарів між зсувами хвилі», тож шари в одній групі друкуються однаково." # AI Translated msgid "Layers between ripple offset" msgstr "Шарів між зсувами хвилі" # AI Translated msgid "" "Specifies how many consecutive layers share the same ripple phase before the offset is applied.\n" "For example:\n" "- 1 = Layer 1 is printed with the base ripple pattern, then layer 2 is shifted by the configured offset, then layer 3 returns to the base pattern, and so on.\n" "- 3 = Layers 1 to 3 are printed with the base ripple pattern, then layers 4 to 6 are shifted by the configured offset, then layers 7 to 9 return to the base pattern, etc." msgstr "" "Визначає, скільки послідовних шарів мають однакову фазу хвилі до застосування зсуву.\n" "Наприклад:\n" "- 1 = шар 1 друкується базовим візерунком хвилі, потім шар 2 зсувається на налаштований зсув, потім шар 3 повертається до базового візерунка і так далі.\n" "- 3 = шари з 1 по 3 друкуються базовим візерунком хвилі, потім шари з 4 по 6 зсуваються на налаштований зсув, потім шари з 7 по 9 повертаються до базового візерунка тощо." msgid "Filter out tiny gaps" msgstr "Відфільтровувати крихітні прогалини" msgid "Layers and Perimeters" msgstr "Шари та периметри" msgid "Don't print gap fill with a length is smaller than the threshold specified (in mm). This setting applies to top, bottom and solid infill and, if using the classic perimeter generator, to wall gap fill." msgstr "Не друкувати заповнення прогалин, якщо їхня довжина менша за вказаний поріг (у мм). Це налаштування застосовується до верхнього, нижнього та суцільного заповнення, а також, при використанні класичного генератора периметрів, до заповнення проміжків у стінках." msgid "This is the speed for gap infill. Gaps usually have irregular line width and should be printed more slowly." msgstr "Швидкість заповнення зазору. Зазор зазвичай має неправильну ширину лінії та має друкуватися повільніше" msgid "Precise Z height" msgstr "Точна висота Z" msgid "Enable this to get precise Z height of object after slicing. It will get the precise object height by fine-tuning the layer heights of the last few layers. Note that this is an experimental parameter." msgstr "Увімкніть це, щоб отримати точну висоту об’єкта Z після нарізки. Він отримає точну висоту об’єкта, уточнивши висоти шарів останніх кількох шарів. Зауважте, що це експериментальний параметр." msgid "Arc fitting" msgstr "Дугові траекторії" msgid "" "Enable this to get a G-code file which has G2 and G3 moves. The fitting tolerance is same as the resolution.\n" "\n" "Note: For Klipper machines, this option is recommended to be disabled. Klipper does not benefit from arc commands as these are split again into line segments by the firmware. This results in a reduction in surface quality as line segments are converted to arcs by the slicer and then back to line segments by the firmware." msgstr "" "Увімкніть цю опцію, щоб отримати файл G-коду з ходами G2 і G3. Допуск на припасування такий самий, як і роздільна здатність.\n" "\n" "Примітка: Для машин з кліперним керуванням цю опцію рекомендується вимкнути. Klipper не використовує команди дуги, оскільки вони знову розбиваються прошивкою на сегменти ліній. Це призводить до зниження якості поверхні, оскільки сегменти ліній перетворюються на дуги слайсером, а потім знову на сегменти ліній прошивкою." msgid "Add line number" msgstr "Додати номер рядка" msgid "Enable this to add line number(Nx) at the beginning of each G-code line." msgstr "Ця опція використовується для додавання номера рядка (Nx) на початку кожногорядки G-Code" msgid "Scan first layer" msgstr "Сканувати перший шар" # AI Translated msgid "Enable this to allow the camera on the printer to check the quality of the first layer." msgstr "Увімкнення цього параметра дозволяє камері на принтері перевіряти якість першого шару" # AI Translated msgid "Power Loss Recovery" msgstr "Відновлення після втрати живлення" # AI Translated msgid "Choose how to control power loss recovery. When set to Printer configuration, the slicer will not emit power loss recovery G-code and will leave the printer's configuration unchanged. Applicable to Bambu Lab or Marlin 2 firmware based printers." msgstr "Виберіть, як керувати відновленням після втрати живлення. Якщо вибрано «Конфігурація принтера», слайсер не генеруватиме G-код відновлення після втрати живлення і залишить конфігурацію принтера без змін. Стосується принтерів на базі прошивки Bambu Lab або Marlin 2." msgid "Printer configuration" msgstr "Конфігурація принтера" msgid "Nozzle type" msgstr "Тип сопла" msgid "The metallic material of the nozzle: This determines the abrasive resistance of the nozzle and what kind of filament can be printed." msgstr "Металевий матеріал сопла. Це визначає зносостійкість сопла та який тип нитки можна друкувати" msgid "Hardened steel" msgstr "Гартова сталь" msgid "Stainless steel" msgstr "Нержавіюча сталь" # AI Translated msgid "Tungsten carbide" msgstr "Карбід вольфраму" msgid "Nozzle HRC" msgstr "HRC Сопла" # AI Translated msgid "The nozzle's hardness. Zero means no checking for nozzle hardness during slicing." msgstr "Твердість сопла. Нуль означає відсутність перевірки твердості сопла під час нарізки." msgid "HRC" msgstr "HRC" msgid "Printer structure" msgstr "Структура принтера" msgid "The physical arrangement and components of a printing device." msgstr "Фізична структура та компоненти пристрою для друку" msgid "CoreXY" msgstr "CoreXY" msgid "I3" msgstr "І3" msgid "Hbot" msgstr "Hbot" msgid "Delta" msgstr "Delta" msgid "Best object position" msgstr "Найкраще положення об’єкта" msgid "Best auto arranging position in range [0,1] w.r.t. bed shape." msgstr "Найкраще автоматичне розташування об’єкта в діапазоні [0,1] відносно форми ліжка." msgid "Enable this option if machine has auxiliary part cooling fan. G-code command: M106 P2 S(0-255)." msgstr "Дозволити цей параметр, якщо принтер має вентилятор охолодження допоміжної частини. Команда G-коду: M106 P2 S(0-255)." msgid "Fan direction" msgstr "Напрямок вентилятора" msgid "Cooling fan direction of the printer" msgstr "Напрямок вентилятора охолодження для принтера" msgid "Both" msgstr "Обидва" # AI Translated msgid "" "Start the fan this number of seconds earlier than its target start time (you can use fractional seconds). It assumes infinite acceleration for this time estimation, and will only take into account G1 and G0 moves (arc fitting is unsupported).\n" "It won't move fan commands from custom G-code (they act as a sort of 'barrier').\n" "It won't move fan commands into the start G-code if the 'only custom start G-code' is activated.\n" "Use 0 to deactivate." msgstr "" "Запустіть вентилятор на таку кількість секунд раніше за цільовий час початку (можна використовувати дробові секунди). Він передбачає нескінченне прискорення для цієї оцінки часу і враховуватиме лише переміщення G1 і G0 (дуговий фітинг не підтримується).\n" "Він не буде переміщати команди вентиляторів з користувацького G-коду (вони діють як свого роду «бар'єр»).\n" "Він не переміщає команди вентиляторів у початковий G-код, якщо активовано «лише користувацький початковий G-код».\n" "Використовуйте 0 для деактивації." msgid "Only overhangs" msgstr "Тільки нависання" msgid "Will only take into account the delay for the cooling of overhangs." msgstr "Буде враховуватись лише затримка охолодження нависань." msgid "Fan kick-start time" msgstr "Час запуску вентилятора" msgid "" "Emit a max fan speed command for this amount of seconds before reducing to target speed to kick-start the cooling fan.\n" "This is useful for fans where a low PWM/power may be insufficient to get the fan started spinning from a stop, or to get the fan up to speed faster.\n" "Set to 0 to deactivate." msgstr "" "Видайте команду max fan speed (максимальна швидкість вентилятора) за цекількість секунд до зниження до цільової швидкості, щоб запуститивентилятор охолодження.\n" "Це корисно для вентиляторів, у яких низький рівень PWM/потужності може бути недостатнім для того, щоб вентилятор почав обертатися з упору, абодля прискорення роботи вентилятора.\n" "Для деактивації встановіть значення 0." # AI Translated msgid "Minimum non-zero part cooling fan speed" msgstr "Мінімальна ненульова швидкість вентилятора охолодження деталей" # AI Translated msgid "" "Some part-cooling fans cannot start spinning when commanded below a certain PWM duty cycle. When set above 0, any non-zero part-cooling fan command will be raised to at least this percentage so the fan reliably starts. A fan command of 0 (fan off) is always honoured exactly. This clamp is applied after every other fan calculation (first-layer ramp, layer-time interpolation, overhang/bridge/support-interface/ironing overrides), so scaling still operates within the range [this value, 100%].\n" "If your firmware already disables the fan below a threshold (for example Klipper's [fan] off_below: 0.10 shuts the fan off whenever the commanded duty cycle is below 10%), this option and the firmware threshold should ideally be set to the same value. Matching them (e.g. off_below: 0.10 in Klipper and 10% here) guarantees the slicer never emits a non-zero value that the firmware would silently drop, and the fan never receives a value below the one you know it can actually spool at.\n" "Set to 0 to deactivate." msgstr "" "Деякі вентилятори охолодження деталей не можуть почати обертатися, якщо задано робочий цикл PWM нижче певного рівня. Якщо значення більше 0, будь-яка ненульова команда вентилятора охолодження деталей буде піднята щонайменше до цього відсотка, щоб вентилятор надійно запускався. Команда 0 (вентилятор вимкнено) завжди виконується точно. Це обмеження застосовується після всіх інших обчислень вентилятора (нарощування на першому шарі, інтерполяція за часом шару, перевизначення для нависань/мостів/інтерфейсу підтримок/розгладжування), тож масштабування й далі працює в діапазоні [це значення, 100%].\n" "Якщо ваша прошивка вже вимикає вентилятор нижче певного порогу (наприклад, off_below: 0.10 у секції [fan] Klipper вимикає вентилятор щоразу, коли заданий робочий цикл нижчий за 10%), цю опцію та поріг прошивки бажано встановити однаковими. Їхній збіг (наприклад, off_below: 0.10 у Klipper і 10% тут) гарантує, що слайсер ніколи не видасть ненульове значення, яке прошивка мовчки відкине, і що вентилятор ніколи не отримає значення, нижче за те, з яким він точно може розкрутитися.\n" "Встановіть 0, щоб вимкнути." msgid "Time cost" msgstr "Вартість часу" msgid "The printer cost per hour." msgstr "Вартість друку за годину" msgid "money/h" msgstr "гроші/год" # AI Translated msgid "Support controlling chamber temperature" msgstr "Підтримує керування температурою термокамери" msgid "" "This option is enabled if machine support controlling chamber temperature\n" "G-code command: M141 S(0-255)" msgstr "" "Ця опція ввімкнена, якщо машина підтримує контроль температури в камері\n" "Команда G-коду: M141 S(0-255)" msgid "Support air filtration" msgstr "Підтримка повітряної фільтрації" msgid "" "Enable this if printer support air filtration\n" "G-code command: M106 P3 S(0-255)" msgstr "" "Увімкніть цей параметр, якщо принтер підтримує фільтрацію повітря\n" "Команда G-коду: M106 P3 S(0-255)" msgid "Use cooling filter" msgstr "Використовувати фільтр охолодження" msgid "Enable this if printer support cooling filter" msgstr "Дозволити це, якщо принтер підтримує фільтр охолодження" msgid "G-code flavor" msgstr "Тип G-коду" msgid "What kind of G-code the printer is compatible with." msgstr "З яким gcode сумісний принтер" msgid "Klipper" msgstr "Klipper" # AI Translated msgid "Skip G-code config block" msgstr "Пропустити блок конфігурації G-code" # AI Translated msgid "Do not write the CONFIG_BLOCK (slicer configuration key/value pairs) into the G-code file. This can help with printers whose firmware crashes when parsing these comment lines (e.g. Anycubic go-klipper). Note: the G-code file will no longer contain slicer settings, so importing it back into OrcaSlicer will not restore the configuration." msgstr "Не записувати CONFIG_BLOCK (пари ключ/значення з конфігурацією слайсера) у файл G-code. Це може допомогти з принтерами, прошивка яких аварійно завершується під час розбору цих рядків коментарів (напр. Anycubic go-klipper). Примітка: файл G-code більше не міститиме налаштувань слайсера, тож зворотний імпорт до OrcaSlicer не відновить конфігурацію." msgid "Pellet Modded Printer" msgstr "Принтер модифікований гранулами" msgid "Enable this option if your printer uses pellets instead of filaments." msgstr "Увімкніть цей параметр, якщо ваш принтер використовує гранули, а не філамент" msgid "Support multi bed types" msgstr "Підтримка різних типів поверхонь стола" msgid "Enable this option if you want to use multiple bed types." msgstr "Увімкніть цю опцію, якщо ви хочете використовувати кілька типів поверхонь стола" msgid "Label objects" msgstr "Маркувати обʼєкти" msgid "Enable this to add comments into the G-code labeling print moves with what object they belong to, which is useful for the Octoprint CancelObject plug-in. This setting is NOT compatible with Single Extruder Multi Material setup and Wipe into Object / Wipe into Infill." msgstr "Увімкніть цей параметр, щоб додати коментарі до друку друку мітки G-Code із зазначенням обʼєкта, якому вони належать, що корисно для модуля Octoprint CancelObject, що підключається. Ці налаштування НЕ сумісні з налаштуваннями «Один екструдер» (Single Extruder Multi Material) і «Протирати в обʼєкт/протирати в заповнення» (Wipe into Object/Wipe into Infill)." msgid "Exclude objects" msgstr "Виключити обʼєкт" msgid "Enable this option to add EXCLUDE OBJECT command in G-code." msgstr "Увімкнути цей параметр для додавання команди ВИКЛЮЧИТИ ОБʼЄКТ у G-code" msgid "Verbose G-code" msgstr "Докладний G-код" msgid "Enable this to get a commented G-code file, with each line explained by a descriptive text. If you print from SD card, the additional weight of the file could make your firmware slow down." msgstr "Увімкніть цей параметр, щоб отримати прокоментований файл G-коду, Кожний рядок якого пояснюється описовим текстом. Під час друку з SD-карти додаткова вага файлу може уповільнити роботу вбудованого програмного забезпечення." msgid "Infill combination" msgstr "Обʼєднання заповнення" msgid "Automatically combine sparse infill of several layers to print together in order to reduce time. Walls are still printed with original layer height." msgstr "Автоматично комбінуйте розріджене заповнення кількох шарів, щоб друкувати їх разом і зменшити час друку. Стіни все ще друкуються з оригінальною висотою шару." # AI Translated msgid "Infill shift step" msgstr "Крок зсуву заповнення" # AI Translated msgid "This parameter adds a slight displacement to each layer of infill to create a cross texture." msgstr "Цей параметр додає невелике зміщення кожному шару заповнення, щоб створити перехресну текстуру." # AI Translated msgid "Sparse infill rotation template" msgstr "Шаблон обертання часткового заповнення" # AI Translated msgid "Rotate the sparse infill direction per layer using a template of angles. Enter comma-separated degrees (e.g., '0,30,60,90'). Angles are applied in order by layer and repeat when the list ends. Advanced syntax is supported: '+5' rotates +5° every layer; '+5#5' rotates +5° every 5 layers. See the Wiki for details. When a template is set, the standard infill direction setting is ignored. Note: some infill patterns (e.g., Gyroid) control rotation themselves; use with care." msgstr "Обертати напрямок часткового заповнення на кожному шарі за шаблоном кутів. Введіть градуси через кому (наприклад, '0,30,60,90'). Кути застосовуються по порядку до шарів і повторюються, коли список закінчується. Підтримується розширений синтаксис: '+5' обертає на +5° кожен шар; '+5#5' обертає на +5° кожні 5 шарів. Докладніше див. у Wiki. Коли задано шаблон, стандартне налаштування напрямку заповнення ігнорується. Примітка: деякі шаблони заповнення (наприклад, Гіроїд) керують обертанням самостійно; використовуйте обережно." # AI Translated msgid "Solid infill rotation template" msgstr "Шаблон обертання суцільного заповнення" # AI Translated msgid "This parameter adds a rotation of solid infill direction to each layer according to the specified template. The template is a comma-separated list of angles in degrees, e.g. '0,90'. The first angle is applied to the first layer, the second angle to the second layer, and so on. If there are more layers than angles, the angles will be repeated. Note that not all solid infill patterns support rotation." msgstr "Цей параметр додає обертання напрямку суцільного заповнення до кожного шару відповідно до заданого шаблону. Шаблон — це список кутів у градусах через кому, наприклад '0,90'. Перший кут застосовується до першого шару, другий — до другого і так далі. Якщо шарів більше, ніж кутів, кути повторюються. Зверніть увагу, що не всі шаблони суцільного заповнення підтримують обертання." # AI Translated msgid "Skeleton infill density" msgstr "Щільність скелетного заповнення" # AI Translated msgid "The remaining part of the model contour after removing a certain depth from the surface is called the skeleton. This parameter is used to adjust the density of this section. When two regions have the same sparse infill settings but different skeleton densities, their skeleton areas will develop overlapping sections. Default is as same as infill density." msgstr "Частина контуру моделі, що залишається після видалення певної глибини від поверхні, називається скелетом. Цей параметр регулює щільність цієї частини. Коли дві області мають однакові налаштування часткового заповнення, але різну щільність скелета, їхні скелетні зони утворять ділянки, що перекриваються. Типово збігається зі щільністю заповнення." # AI Translated msgid "Skin infill density" msgstr "Щільність заповнення оболонки" # AI Translated msgid "The portion of the model's outer surface within a certain depth range is called the skin. This parameter is used to adjust the density of this section. When two regions have the same sparse infill settings but different skin densities, this area will not be split into two separate regions. Default is as same as infill density." msgstr "Частина зовнішньої поверхні моделі в межах певної глибини називається оболонкою. Цей параметр регулює щільність цієї частини. Коли дві області мають однакові налаштування часткового заповнення, але різну щільність оболонки, ця зона не буде розділена на дві окремі області. Типово збігається зі щільністю заповнення." # AI Translated msgid "Skin infill depth" msgstr "Глибина заповнення оболонки" # AI Translated msgid "The parameter sets the depth of skin." msgstr "Параметр задає глибину оболонки." # AI Translated msgid "Infill lock depth" msgstr "Глибина зчеплення заповнення" # AI Translated msgid "The parameter sets the overlapping depth between the interior and skin." msgstr "Параметр задає глибину перекриття між внутрішньою частиною та оболонкою." # AI Translated msgid "Skin line width" msgstr "Ширина лінії оболонки" # AI Translated msgid "Adjust the line width of the selected skin paths." msgstr "Налаштуйте ширину лінії вибраних шляхів оболонки." # AI Translated msgid "Skeleton line width" msgstr "Ширина лінії скелета" # AI Translated msgid "Adjust the line width of the selected skeleton paths." msgstr "Налаштуйте ширину лінії вибраних шляхів скелета." # AI Translated msgid "Symmetric infill Y axis" msgstr "Симетричне заповнення по осі Y" # AI Translated msgid "If the model has two parts that are symmetric about the Y axis, and you want these parts to have symmetric textures, please click this option on one of the parts." msgstr "Якщо модель має дві частини, симетричні відносно осі Y, і ви хочете, щоб ці частини мали симетричні текстури, увімкніть цю опцію на одній із частин." msgid "Infill combination - Max layer height" msgstr "Комбінація заповнення - Максимальна висота шару" msgid "" "Maximum layer height for the combined sparse infill.\n" "\n" "Set it to 0 or 100% to use the nozzle diameter (for maximum reduction in print time) or a value of ~80% to maximize sparse infill strength.\n" "\n" "The number of layers over which infill is combined is derived by dividing this value with the layer height and rounded down to the nearest decimal.\n" "\n" "Use either absolute mm values (eg. 0.32mm for a 0.4mm nozzle) or % values (eg 80%). This value must not be larger than the nozzle diameter." msgstr "" "Максимальна висота шару для обʼєднаного розрідженого заповнення.\n" "\n" "Встановіть значення 0 або 100%, щоб використовувати діаметр сопла (для максимального зменшення часу друку) або значення ~80%, щоб збільшити міцність розрідженого заповнення.\n" "\n" "Кількість шарів, протягом яких заповнення обʼєднується, визначається шляхом ділення цього значення на висоту шару і округлення вниз до найближчого десяткового значення.\n" "\n" "Використовуйте абсолютні значення в мм (наприклад, 0.32 мм для сопла 0.4 мм) або відсоткові значення (наприклад, 80%). Це значення не повинно перевищувати діаметр сопла." # AI Translated msgid "Enable clumping detection" msgstr "Увімкнути виявлення налипання" # AI Translated msgid "Clumping detection layers" msgstr "Шари виявлення налипання" # AI Translated msgid "Clumping detection layers." msgstr "Шари виявлення налипання." # AI Translated msgid "Probing exclude area of clumping" msgstr "Виключена зона зондування для налипання" # AI Translated msgid "Probing exclude area of clumping." msgstr "Виключена зона зондування для налипання." msgid "Lateral lattice angle 1" msgstr "Кут решітки 1" msgid "The angle of the first set of Lateral lattice elements in the Z direction. Zero is vertical." msgstr "Кут першого набору 2D-решіткових елементів у напрямку Z. Нуль означає вертикальне розташування." msgid "Lateral lattice angle 2" msgstr "Кут решітки 1" msgid "The angle of the second set of Lateral lattice elements in the Z direction. Zero is vertical." msgstr "Кут другого набору 2D-решіткових елементів у напрямку Z. Нуль означає вертикальне розташування." # AI Translated msgid "Infill overhang angle" msgstr "Кут нависання заповнення" # AI Translated msgid "The angle of the infill angled lines. 60° will result in a pure honeycomb." msgstr "Кут нахилених ліній заповнення. 60° дасть чисті медові стільники." # AI Translated msgid "Lightning overhang angle" msgstr "Кут нависання Блискавки" # AI Translated msgid "Maximum overhang angle for Lightning infill support propagation." msgstr "Максимальний кут нависання для поширення підтримки заповнення Блискавка." # AI Translated msgid "Prune angle" msgstr "Кут обрізання" # AI Translated msgid "" "Controls how aggressively short or unsupported Lightning branches are pruned.\n" "This angle is converted internally to a per-layer distance." msgstr "" "Визначає, наскільки агресивно обрізаються короткі або неопорні гілки Блискавки.\n" "Цей кут внутрішньо перетворюється на відстань для кожного шару." # AI Translated msgid "Straightening angle" msgstr "Кут випрямлення" # AI Translated msgid "Maximum straightening angle used to simplify Lightning branches." msgstr "Максимальний кут випрямлення, що використовується для спрощення гілок Блискавки." msgid "Sparse infill anchor length" msgstr "Довжина прив’язки часткового заповнення" msgid "" "Connect an infill line to an internal perimeter with a short segment of an additional perimeter. If expressed as percentage (example: 15%) it is calculated over infill extrusion width. Orca Slicer tries to connect two close infill lines to a short perimeter segment. If no such perimeter segment shorter than infill_anchor_max is found, the infill line is connected to a perimeter segment at just one side and the length of the perimeter segment taken is limited to this parameter, but no longer than anchor_length_max.\n" "Set this parameter to zero to disable anchoring perimeters connected to a single infill line." msgstr "" "Зʼєднайте лінію заповнення з внутрішнім периметром із коротким сегментомдодаткового периметра. Якщо воно виражено у відсотках (наприклад, 15%), воно розраховується за шириною екструзії заповнення. Orca Slicer намагається зʼєднати Дві близькі лінії заповнення з коротким сегментом периметра. Якщо такий сегмент периметра коротше infill_anchor_max не знайдено, лінія заповнення зʼєднується з сегментом периметра лише з одного боку, і довжина взятого сегменту периметра обмежена цим параметром, але не більше anchor_length_max.\n" "Встановіть цей параметр рівним нулю, щоб вимкнути периметри привʼязки.повʼязані з однією лінією заповнення." msgid "0 (no open anchors)" msgstr "0 (немає відкритих привʼязок)" msgid "1000 (unlimited)" msgstr "1000 (необмежено)" msgid "Maximum length of the infill anchor" msgstr "Максимальна довжина прив’язки заповнення" msgid "" "Connect an infill line to an internal perimeter with a short segment of an additional perimeter. If expressed as percentage (example: 15%) it is calculated over infill extrusion width. Orca Slicer tries to connect two close infill lines to a short perimeter segment. If no such perimeter segment shorter than this parameter is found, the infill line is connected to a perimeter segment at just one side and the length of the perimeter segment taken is limited to infill_anchor, but no longer than this parameter.\n" "If set to 0, the old algorithm for infill connection will be used, it should create the same result as with 1000 & 0." msgstr "" "Зʼєднайте лінію заповнення з внутрішнім периметром із коротким сегментомдодаткового периметра. Якщо воно виражено у відсотках (наприклад, 15%), воно розраховується за шириною екструзії заповнення. Orca Slicer намагається зʼєднати Дві близькі лінії заповнення з коротким сегментом периметра. Якщо такий сегмент периметра коротший за цей параметр не знайдено, лінія заповнення зʼєднується з сегментом периметра лише з одного боку, і довжина взятого сегмент периметра обмежений infill_anchor, але не довшим за цей параметр.\n" "Якщо встановлено значення 0, буде використано старий алгоритм для Підключення заповнення, він повинен створити той же результат, що і для 1000 & 0." msgid "0 (Simple connect)" msgstr "0 (просте підключення)" # AI Translated msgid "" "Filament to print internal sparse infill.\n" "\"Default\" uses the active object/part filament." msgstr "" "Філамент для друку внутрішнього часткового заповнення.\n" "\"Типовий\" використовує філамент активного обʼєкта/частини." msgid "Line width of internal sparse infill. If expressed as a %, it will be computed over the nozzle diameter." msgstr "Ширина лінії внутрішнього розрідженого заповнення. Якщо виражена у %, вона буде розрахована по діаметру сопла." msgid "Infill/wall overlap" msgstr "Накладання заповнення/стінки" #, no-c-format, no-boost-format msgid "This allows the infill area to be enlarged slightly to overlap with walls for better bonding. The percentage value is relative to line width of sparse infill. Set this value to ~10-15% to minimize potential over extrusion and accumulation of material resulting in rough top surfaces." msgstr "Область заповнення дещо збільшена, щоб перекривати стіну для кращого зчеплення. Значення у відсотках відносно ширини лінії розрідженого заповнення. Встановіть це значення на рівні ~10-15%, щоб мінімізувати можливість надмірного видавлювання та накопичення матеріалу, що призводить до шорсткості верхньої поверхні." msgid "Top/Bottom solid infill/wall overlap" msgstr "Накладання суцільного заповнення на стінки зверху та знизу" #, no-c-format, no-boost-format msgid "Top solid infill area is enlarged slightly to overlap with wall for better bonding and to minimize the appearance of pinholes where the top infill meets the walls. A value of 25-30% is a good starting point, minimizing the appearance of pinholes. The percentage value is relative to line width of sparse infill." msgstr "Площа верхнього суцільного заповнення злегка збільшується, щоб накладатися на стінку для кращого зчеплення та зменшення прогалин у місцях прилягання верхнього заповнення до стінок. Значення 25-30% є хорошим початком для мінімізації таких прогалин. Значення у відсотках відносно ширини лінії часткового заповнення" msgid "This is the speed for internal sparse infill." msgstr "Швидкість внутрішнього часткового заповнення" msgid "Inherits profile" msgstr "Успадковує профіль" msgid "Name of parent profile." msgstr "Назва батьківського профілю" msgid "Interface shells" msgstr "Інтерфейсні оболонки" msgid "Force the generation of solid shells between adjacent materials/volumes. Useful for multi-extruder prints with translucent materials or manual soluble support material." msgstr "Примусове створення твердих оболонок між сусідніми матеріалами/обʼємами. Корисна для друку кількома екструдерами напівпрозорими матеріалами або ручним розчинним матеріалом підтримки" msgid "Maximum width of a segmented region" msgstr "Максимальна ширина сегментованої області" msgid "Maximum width of a segmented region. A value of 0 disables this feature." msgstr "Максимальна ширина сегментованої області. Нуль вимикає цю функцію." msgid "Interlocking depth of a segmented region" msgstr "Глибина взаємного взаємодії сегментованої області" msgid "Interlocking depth of a segmented region. It will be ignored if \"mmu_segmented_region_max_width\" is zero or if \"mmu_segmented_region_interlocking_depth\" is bigger than \"mmu_segmented_region_max_width\". Zero disables this feature." msgstr "" "Глибина зчеплення сегментованої області. Буде ігноруватися, якщо \"mmu_segmented_region_max_width\" дорівнює нулю або якщо \"mmu_segmented_region_interlocking_depth\" більший за \"mmu_segmented_region_max_width\".\n" "\n" "Нульове значення вимикає цю функцію." msgid "Use beam interlocking" msgstr "Використовувати зчеплення балками" msgid "Generate interlocking beam structure at the locations where different filaments touch. This improves the adhesion between filaments, especially models printed in different materials." msgstr "Генерація зчіпної балкової структури в місцях дотику різних філаментів. Це покращує адгезію між філаментами, особливо для моделей, надрукованих з різних матеріалів." msgid "Interlocking beam width" msgstr "Ширина зчіпних балок" msgid "The width of the interlocking structure beams." msgstr "Ширина балок зчіпної структури." msgid "Interlocking direction" msgstr "Напрямок зчеплення" # AI Translated msgid "Orientation of interlock beams." msgstr "Орієнтація зчіпних балок." msgid "Interlocking beam layers" msgstr "Кількість шарів взаємоповʼязаних балок" msgid "The height of the beams of the interlocking structure, measured in number of layers. Less layers is stronger, but more prone to defects." msgstr "Висота балок зчіпної структури, виміряна в кількості шарів. Менша кількість шарів забезпечує більшу міцність, але підвищує ризик дефектів." msgid "Interlocking depth" msgstr "Глибина взаємоповʼязаної структури" msgid "The distance from the boundary between filaments to generate interlocking structure, measured in cells. Too few cells will result in poor adhesion." msgstr "Глибина зчіплення – відстань від межі між філаментами для генерації зчіпної структури, вимірюється в комірках. Занадто мала кількість комірок призведе до слабкої адгезії." msgid "Interlocking boundary avoidance" msgstr "Уникнення зчіпної межі" msgid "The distance from the outside of a model where interlocking structures will not be generated, measured in cells." msgstr "Відстань від зовнішнього краю моделі, в межах якої зчіпні структури не будуть створюватися, вимірюється в комірках." msgid "Ironing type" msgstr "Тип розгладжування" # AI Translated msgid "Ironing uses a small flow to print at the same height of a surface to make flat surfaces smoother. This setting controls which layers are being ironed." msgstr "При розгладжуванні використовується невеликий потік для друку на тій самій висоті поверхні, щоб зробити плоскі поверхні гладшими. Цей параметр визначає, які шари розгладжуються." msgid "No ironing" msgstr "Немає Розгладжування" # AI Translated msgid "All top surfaces" msgstr "Усі верхні поверхні" # AI Translated msgid "Topmost surface only" msgstr "Лише найвища поверхня" # AI Translated msgid "All solid layers" msgstr "Усі суцільні шари" msgid "Ironing Pattern" msgstr "Шаблон прасування" msgid "The pattern that will be used when ironing." msgstr "Шаблон, який буде використовуватися під час прасування" # AI Translated msgid "This is the amount of material to be extruded during ironing. It is relative to the flow of normal layer height. Too high a value will result in overextrusion on the surface." msgstr "Кількість матеріалу, що видавлюється під час розгладжування. Вона задається відносно потоку для нормальної висоти шару. Надто високе значення призведе до надмірної екструзії на поверхні" # AI Translated msgid "This is the distance between the lines used for ironing." msgstr "Відстань між лініями розгладжування" msgid "The distance to keep from the edges. A value of 0 sets this to half of the nozzle diameter." msgstr "Відстань до збереження від країв. Значення 0 встановлює її рівною половині діаметра сопла" # AI Translated msgid "This is the print speed for ironing lines." msgstr "Швидкість друку ліній розгладжування" # AI Translated msgid "Ironing angle offset" msgstr "Зсув кута розгладжування" # AI Translated msgid "The angle of ironing lines offset from the top surface." msgstr "Кут ліній розгладжування зі зсувом відносно верхньої поверхні." # AI Translated msgid "Fixed ironing angle" msgstr "Фіксований кут розгладжування" # AI Translated msgid "Use a fixed absolute angle for ironing." msgstr "Використовувати фіксований абсолютний кут для розгладжування." # AI Translated msgid "Ironing expansion" msgstr "Розширення розгладжування" # AI Translated msgid "Expand or contract the ironing area." msgstr "Розширити або звузити зону розгладжування." # AI Translated msgid "Z contouring enabled" msgstr "Контурування по Z увімкнено" # AI Translated msgid "Enable Z-layer contouring (aka Z-layer anti-aliasing)." msgstr "Увімкнути контурування Z-шарів (тобто згладжування Z-шарів)." # AI Translated msgid "Minimize wall height angle" msgstr "Кут мінімізації висоти стінки" # AI Translated msgid "" "Reduce the height of top-surface perimeters to match the model edge height.\n" "Affects perimeters with a slope less than this angle (degrees).\n" "A reasonable value is 35. Set to 0 to disable." msgstr "" "Зменшує висоту периметрів верхньої поверхні відповідно до висоти краю моделі.\n" "Впливає на периметри з нахилом, меншим за цей кут (у градусах).\n" "Розумне значення — 35. Встановіть 0, щоб вимкнути." # AI Translated msgid "Don't alternate fill direction" msgstr "Не чергувати напрямок заповнення" # AI Translated msgid "Disable alternating fill direction when using Z contouring." msgstr "Вимкнути чергування напрямку заповнення при використанні контурування по Z." msgid "Minimum Z height" msgstr "Мінімальна висота Z" # AI Translated msgid "" "Minimum Z-layer height.\n" "Also controls the slicing plane." msgstr "" "Мінімальна висота Z-шару.\n" "Також визначає площину нарізки." msgid "This G-code is inserted at every layer change after the Z lift." msgstr "Ця частина gcode вставляється при кожній зміні шару після підйому z" # AI Translated msgid "Clumping detection G-code" msgstr "G-код виявлення налипання" # AI Translated msgid "Silent Mode" msgstr "Безшумний режим" # AI Translated msgid "Whether the machine supports silent mode in which machine uses lower acceleration to print more quietly" msgstr "Чи підтримує машина безшумний режим, у якому вона використовує менше прискорення, щоб друкувати тихіше" msgid "Emit limits to G-code" msgstr "Обмеження на емітацію G-коду" msgid "Machine limits" msgstr "Обмеження машини" msgid "" "If enabled, the machine limits will be emitted to G-code file.\n" "This option will be ignored if the G-code flavor is set to Klipper." msgstr "" "Якщо увімкнено, ліміти машини будуть виводитися у файл G-коду.\n" "Цей параметр буде проігноровано, якщо у параметрах g-коду встановлено значення Klipper." # AI Translated msgid "This G-code will be used as a code for the pause print. Users can insert pause G-code in the G-code viewer." msgstr "Цей G-код використовуватиметься як код для паузи друку. Користувачі можуть вставити G-код паузи у переглядачі G-коду" msgid "This G-code will be used as a custom code." msgstr "Цей G-код буде використовуватися як код користувача" msgid "Small area flow compensation (beta)" msgstr "Компенсація потоку на малих площах (бета)" msgid "Enable flow compensation for small infill areas." msgstr "Увімкніть компенсацію потоку для невеликих ділянок заповнення" msgid "Flow Compensation Model" msgstr "Модель компенсації потоку" # AI Translated msgid "Flow Compensation Model, used to adjust the flow for small infill areas. The model is expressed as a comma separated pair of values for extrusion length and flow correction factor. Each pair is on a separate line, followed by a semicolon, in the following format: \"1.234, 5.678;\"" msgstr "Модель компенсації потоку, що використовується для коригування потоку в малих зонах заповнення. Модель задається парою значень через кому: довжина екструзії та коефіцієнт корекції потоку. Кожна пара — в окремому рядку, після неї крапка з комою, у такому форматі: \"1.234, 5.678;\"" msgid "Maximum speed X" msgstr "Максимальна швидкість X" msgid "Maximum speed Y" msgstr "Максимальна швидкість Y" msgid "Maximum speed Z" msgstr "Максимальна швидкість Z" msgid "Maximum speed E" msgstr "Максимальна швидкість E" msgid "Maximum X speed" msgstr "Максимальна швидкість X" msgid "Maximum Y speed" msgstr "Максимальна швидкість Y" msgid "Maximum Z speed" msgstr "Максимальна швидкість Z" msgid "Maximum E speed" msgstr "Максимальна швидкість E" msgid "Maximum acceleration X" msgstr "Максимальне прискорення X" msgid "Maximum acceleration Y" msgstr "Максимальне прискорення Y" msgid "Maximum acceleration Z" msgstr "Максимальне прискорення Z" msgid "Maximum acceleration E" msgstr "Максимальне прискорення E" msgid "Maximum acceleration of the X axis" msgstr "Максимальне прискорення осі X" msgid "Maximum acceleration of the Y axis" msgstr "Максимальне прискорення осі Y" msgid "Maximum acceleration of the Z axis" msgstr "Максимальне прискорення осі Z" msgid "Maximum acceleration of the E axis" msgstr "Максимальне прискорення осі E" msgid "Maximum jerk X" msgstr "Максимальний ривок X" msgid "Maximum jerk Y" msgstr "Максимальний ривок Y" msgid "Maximum jerk Z" msgstr "Максимальний ривок Z" msgid "Maximum jerk E" msgstr "Максимальний ривок E" msgid "Maximum jerk of the X axis" msgstr "Максимальний ривок осі X" msgid "Maximum jerk of the Y axis" msgstr "Максимальний ривок осі Y" msgid "Maximum jerk of the Z axis" msgstr "Максимальний ривок осі Z" msgid "Maximum jerk of the E axis" msgstr "Максимальний ривок осі E" # AI Translated msgid "Maximum Junction Deviation" msgstr "Максимальне Junction Deviation" # AI Translated msgid "" "Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin Firmware\n" "If your Marlin 2 printer uses Classic Jerk set this value to 0.)" msgstr "" "Максимальне відхилення стику (M205 J, застосовується лише якщо JD > 0 для прошивки Marlin\n" "Якщо ваш принтер на Marlin 2 використовує класичний Jerk, встановіть це значення на 0.)" msgid "Minimum speed for extruding" msgstr "Мінімальна швидкість екструзії" msgid "Minimum speed for extruding (M205 S)" msgstr "Мінімальна швидкість для видавлювання (M205 S)" msgid "Minimum travel speed" msgstr "Мінімальна швидкість руху" msgid "Minimum travel speed (M205 T)" msgstr "Мінімальна швидкість руху (M205 T)" msgid "Maximum force of the Y axis" msgstr "Максимальна сила осі Y" msgid "The allowed maximum output force of Y axis" msgstr "Максимальна дозволена вихідна сила осі Y" # AI Translated msgctxt "Newton" msgid "N" msgstr "Н" msgid "Bed mass of the Y axis" msgstr "Маса столу осі Y" msgid "The machine bed mass load of Y axis" msgstr "Маса навантаження столу машини на вісь Y" # AI Translated msgctxt "gram" msgid "g" msgstr "г" msgid "The allowed max printed mass" msgstr "Найбільша дозволена маса друку" msgid "The allowed max printed mass on a plate" msgstr "Найбільша дозволена маса друку на пластині" msgid "Maximum acceleration for extruding" msgstr "Максимальне прискорення для екструдування" msgid "Maximum acceleration for extruding (M204 P)" msgstr "Максимальне прискорення видавлювання (M204 P)" msgid "Maximum acceleration for retracting" msgstr "Максимальне прискорення для втягування" msgid "Maximum acceleration for retracting (M204 R)" msgstr "Максимальне прискорення для втягування (M204 R)" msgid "Maximum acceleration for travel" msgstr "Максимальне прискорення руху" msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2." msgstr "Максимальне прискорення для пересування (M204 T), застосовується лише до Marlin 2" # AI Translated msgid "Resonance avoidance" msgstr "Уникнення резонансу" # AI Translated msgid "" "By reducing the speed of the outer wall to avoid the resonance zone of the printer, ringing on the surface of the model are avoided.\n" "Please turn this option off when testing ringing." msgstr "" "Знижуючи швидкість зовнішньої стінки, щоб уникнути зони резонансу принтера, вдається уникнути брижів на поверхні моделі.\n" "Вимикайте цю опцію під час тестування брижів." msgid "Min" msgstr "Мін." # AI Translated msgid "Minimum speed of resonance avoidance." msgstr "Мінімальна швидкість уникнення резонансу." msgid "Max" msgstr "Макс." # AI Translated msgid "Maximum speed of resonance avoidance." msgstr "Максимальна швидкість уникнення резонансу." # AI Translated msgid "Emit input shaping" msgstr "Видавати команди Input Shaping" # AI Translated msgid "" "Override firmware input shaping settings.\n" "If disabled, firmware settings are used." msgstr "" "Перевизначити налаштування Input Shaping у прошивці.\n" "Якщо вимкнено, використовуються налаштування прошивки." # AI Translated msgid "Input shaper type" msgstr "Тип Input Shaper" # AI Translated msgid "" "Choose the input shaper algorithm.\n" "Default uses the firmware default settings.\n" "Disable turns off input shaping in the firmware." msgstr "" "Виберіть алгоритм Input Shaper.\n" "«Типовий» використовує типові налаштування прошивки.\n" "«Вимкнути» вимикає Input Shaping у прошивці." msgid "MZV" msgstr "MZV" msgid "ZV" msgstr "ZV" msgid "ZVD" msgstr "ZVD" msgid "ZVDD" msgstr "ZVDD" msgid "ZVDDD" msgstr "ZVDDD" msgid "EI" msgstr "EI" msgid "EI2" msgstr "EI2" msgid "2HUMP_EI" msgstr "2HUMP_EI" msgid "EI3" msgstr "EI3" msgid "3HUMP_EI" msgstr "3HUMP_EI" msgid "DAA" msgstr "DAA" msgid "X" msgstr "X" # AI Translated msgid "" "Resonant frequency for the X axis input shaper.\n" "Zero will use the firmware frequency.\n" "To disable input shaping, use the Disable type.\n" "RRF: X and Y values are equal." msgstr "" "Резонансна частота для Input Shaper осі X.\n" "Нуль означає використання частоти з прошивки.\n" "Щоб вимкнути Input Shaping, використовуйте тип «Вимкнути».\n" "RRF: значення X та Y однакові." msgid "Hz" msgstr "Гц" msgid "Y" msgstr "Y" # AI Translated msgid "" "Resonant frequency for the Y axis input shaper.\n" "Zero will use the firmware frequency.\n" "To disable input shaping, use the Disable type." msgstr "" "Резонансна частота для Input Shaper осі Y.\n" "Нуль означає використання частоти з прошивки.\n" "Щоб вимкнути Input Shaping, використовуйте тип «Вимкнути»." # AI Translated msgid "" "Damping ratio for the X axis input shaper.\n" "Zero will use the firmware damping ratio.\n" "To disable input shaping, use the Disable type.\n" "RRF: X and Y values are equal." msgstr "" "Коефіцієнт демпфування для Input Shaper осі X.\n" "Нуль означає використання коефіцієнта демпфування з прошивки.\n" "Щоб вимкнути Input Shaping, використовуйте тип «Вимкнути».\n" "RRF: значення X та Y однакові." # AI Translated msgid "" "Damping ratio for the Y axis input shaper.\n" "Zero will use the firmware damping ratio.\n" "To disable input shaping, use the Disable type." msgstr "" "Коефіцієнт демпфування для Input Shaper осі Y.\n" "Нуль означає використання коефіцієнта демпфування з прошивки.\n" "Щоб вимкнути Input Shaping, використовуйте тип «Вимкнути»." # AI Translated msgid "The part cooling fan speed may be increased when auto cooling is enabled. This is the maximum speed for the part cooling fan." msgstr "Швидкість вентилятора охолодження деталей може бути збільшена, якщо увімкнено автоматичне охолодження. Це максимальна швидкість вентилятора охолодження деталей" # AI Translated msgid "The highest printable layer height for the extruder. Used to limit the maximum layer height when enable adaptive layer height." msgstr "Найбільша друкована висота шару для екструдера. Використовується для обмеження максимальної висоти шару, коли увімкнено адаптивну висоту шару." msgid "Extrusion rate smoothing" msgstr "Вирівнювання швидкості екструзії" msgid "" "This parameter smooths out sudden extrusion rate changes that happen when the printer transitions from printing a high flow (high speed/larger width) extrusion to a lower flow (lower speed/smaller width) extrusion and vice versa.\n" "\n" "It defines the maximum rate by which the extruded volumetric flow in mm³/s can change over time. Higher values mean higher extrusion rate changes are allowed, resulting in faster speed transitions.\n" "\n" "A value of 0 disables the feature.\n" "\n" "For a high speed, high flow direct drive printer (like the Bambu lab or Voron) this value is usually not needed. However it can provide some marginal benefit in certain cases where feature speeds vary greatly. For example, when there are aggressive slowdowns due to overhangs. In these cases a high value of around 300-350 mm³/s² is recommended as this allows for just enough smoothing to assist pressure advance achieve a smoother flow transition.\n" "\n" "For slower printers without pressure advance, the value should be set much lower. A value of 10-15 mm³/s² is a good starting point for direct drive extruders and 5-10 mm³/s² for Bowden style.\n" "\n" "This feature is known as Pressure Equalizer in Prusa slicer.\n" "\n" "Note: this parameter disables arc fitting." msgstr "" "Цей параметр згладжує різкі зміни швидкості екструзії, які відбуваються, коли принтер переходить від друку екструзії з високим обʼємним потоком (висока швидкість/велика ширина) до екструзії з низьким обʼємним потоком (низька швидкість/маленька ширина) і навпаки.\n" "\n" "Він визначає максимальну швидкість, на яку з часом може змінюватися обʼємний потік екструдованого матеріалу в мм3/с. Вищі значення означають, що дозволені більші зміни швидкості екструзії, що призводить до швидшого переходу від однієї швидкості до іншої.\n" "\n" "Значення 0 вимикає цю функцію.\n" "\n" "Для високошвидкісних, високопродуктивних принтерів з прямим приводом (наприклад, Bambu lab або Voron) це значення зазвичай не потрібне. Однак воно може мати певну перевагу в певних випадках, коли швидкість друку дуже різниться. Наприклад, коли виникають агресивні сповільнення через висячі елементи. У таких випадках рекомендується високе значення близько 300-350 мм3/с2, оскільки воно забезпечує достатнє згладжування, щоб допомогти випередженню тиску досягти більш плавного переходу потоку.\n" "\n" "Для повільніших принтерів без попереднього випередження тиску значення має бути значно нижчим. Значення 10-15 мм3/с2 є хорошою відправною точкою для екструдерів з прямим приводом і 5-10 мм3/с2 для екструдерів типу Боудена.\n" "\n" "Ця функція відома як \"Вирівнювач тиску\" в слайсерах Prusa.\n" "\n" "Примітка: цей параметр відключає рух по дугам." msgid "mm³/s²" msgstr "мм³/с²" msgid "Smoothing segment length" msgstr "Довжина сегмента згладжування" msgid "" "A lower value results in smoother extrusion rate transitions. However, this results in a significantly larger G-code file and more instructions for the printer to process.\n" "\n" "Default value of 3 works well for most cases. If your printer is stuttering, increase this value to reduce the number of adjustments made.\n" "\n" "Allowed values: 0.5-5" msgstr "" "Нижче значення призводить до більш плавних переходів швидкості екструзії. Однак це значно збільшує розмір файлу G-code і кількість команд, які потрібно обробити принтеру.\n" "\n" "Типове значення 3 добре підходить для більшості випадків. Якщо ваш принтер працює ривками, збільште це значення, щоб зменшити кількість коригувань.\n" "\n" "Допустимі значення: 0.5-5" msgid "Apply only on external features" msgstr "Застосовувати лише до зовнішніх особливостей" msgid "Applies extrusion rate smoothing only on external perimeters and overhangs. This can help reduce artefacts due to sharp speed transitions on externally visible overhangs without impacting the print speed of features that will not be visible to the user." msgstr "Застосовує згладжування швидкості екструзії лише до зовнішніх периметрів і нависань. Це може допомогти зменшити артефакти, викликані різкими змінами швидкості на зовнішньо видимих нависаннях, без впливу на швидкість друку елементів, які не будуть видимі для користувача." msgid "Minimum speed for part cooling fan." msgstr "Мінімальна швидкість вентилятора охолодження деталі" msgid "" "Speed of auxiliary part cooling fan. Auxiliary fan will run at this speed during printing except the first several layers which is defined by no cooling layers.\n" "Please enable auxiliary_fan in printer settings to use this feature. G-code command: M106 P2 S(0-255)" msgstr "" "Швидкість вентилятора охолодження допоміжної частини. Допоміжний вентилятор працюватиме з цією швидкістю під час друку, окрім перших кількох шарів, що визначаються відсутністю охолоджувальних шарів.\n" "Щоб скористатися цією функцією, увімкніть параметр auxiliary_fan у налаштуваннях принтера. Команда G-коду: M106 P2 S(0-255)" # AI Translated msgid "For the first" msgstr "Для перших" # AI Translated msgid "Set special auxiliary cooling fan for the first certain layers." msgstr "Задати спеціальний допоміжний вентилятор охолодження для перших кількох шарів." # AI Translated msgid "" "Auxiliary fan speed will be ramped up linearly from layer \"For the first\" to maximum at layer \"Full fan speed at layer\".\n" "\"Full fan speed at layer\" will be ignored if lower than \"For the first\", in which case the fan will run at maximum allowed speed at layer \"For the first\" + 1." msgstr "" "Швидкість допоміжного вентилятора лінійно зростатиме від шару «Для перших» до максимуму на шарі «Повна швидкість вентилятора на шарі».\n" "«Повна швидкість вентилятора на шарі» буде проігноровано, якщо це значення менше за «Для перших»; у такому разі вентилятор працюватиме з максимально дозволеною швидкістю на шарі «Для перших» + 1." # AI Translated msgid "Special auxiliary cooling fan speed, effective only for the first x layers." msgstr "Швидкість спеціального допоміжного вентилятора охолодження, діє лише для перших x шарів." # AI Translated msgid "The lowest printable layer height for the extruder. Used to limit the minimum layer height when enable adaptive layer height." msgstr "Найменша друкована висота шару для екструдера. Використовується для обмеження мінімальної висоти шару, коли увімкнено адаптивну висоту шару." msgid "Min print speed" msgstr "Мін. швидкість друку" msgid "The minimum print speed to which the printer slows down to maintain the minimum layer time defined above when the slowdown for better layer cooling is enabled." msgstr "Мінімальна швидкість друку, до якої принтер сповільнюється для підтримки мінімального часу шару, визначеного вище, коли увімкнено уповільнення для кращого охолодження шару." msgid "The diameter of nozzle." msgstr "Діаметр сопла" msgid "Configuration notes" msgstr "Примітки до конфігурації" msgid "You can put here your personal notes. This text will be added to the G-code header comments." msgstr "Ви можете додати тут свої особисті примітки. Цей текст буде додано до коментарів заголовка G-коду." msgid "Host Type" msgstr "Тип хоста" msgid "Orca Slicer can upload G-code files to a printer host. This field must contain the kind of the host." msgstr "Orca Slicer може завантажувати файли G-коду на хост принтера. Це поле повинно утримувати тип хоста." msgid "Nozzle volume" msgstr "Обʼєм сопла" msgid "Volume of nozzle between the filament cutter and the end of the nozzle" msgstr "Обʼєм сопла між різцем та кінцем сопла" msgid "Cooling tube position" msgstr "Позиція охолоджувальної трубки" msgid "Distance of the center-point of the cooling tube from the extruder tip." msgstr "Відстань центральної точки охолоджувальної трубки від наконечника екструдера." msgid "Cooling tube length" msgstr "Довжина охолоджувальної трубки" msgid "Length of the cooling tube to limit space for cooling moves inside it." msgstr "Довжина охолоджувальної трубки для обмеження простору для охолоджуючих рухів всередині неї." msgid "High extruder current on filament swap" msgstr "Звищення струму екструдера на заміні філамента" msgid "It may be beneficial to increase the extruder motor current during the filament exchange sequence to allow for rapid ramming feed rates and to overcome resistance when loading a filament with an ugly shaped tip." msgstr "Може бути корисно збільшити струм двигуна екструдера під час заміни філаменту, щоб забезпечити швидкий раммінг та подолати опір при заведенні філаменту з кінчиком потворної форми." msgid "Filament parking position" msgstr "Позиція паркування філаменту" msgid "Distance of the extruder tip from the position where the filament is parked when unloaded. This should match the value in printer firmware." msgstr "Відстань наконечника екструдера від місця паркування філаменту при виведенні. Це має відповідати значенню в мікропрограмі принтера." msgid "Extra loading distance" msgstr "Додаткова відстань заведення" msgid "When set to zero, the distance the filament is moved from parking position during load is exactly the same as it was moved back during unload. When positive, it is loaded further, if negative, the loading move is shorter than unloading." msgstr "Якщо встановлено на нуль, відстань, на яку філамент переміщується з положення стоянки під час заведення, є точно такою ж, як і при переміщенні назад під час виведення. Якщо позитивне, воно заводеться далі, якщо негативне, рух заведення коротший, ніж виведення." msgid "Start end points" msgstr "Початкові кінцеві точки" msgid "The start and end points which are from the cutter area to the excess chute." msgstr "Початкова та кінцева точки від зони різання до сміттєвого бака." msgid "Reduce infill retraction" msgstr "Зменшити втягування заповнення" # AI Translated msgid "Don't retract when the travel is entirely within an infill area. That means the oozing can't been seen. This can reduce times of retraction for complex model and save printing time, but make slicing and G-code generating slower. Note that Z-hop is also not performed in areas where retraction is skipped." msgstr "Не втягувати, коли переміщення повністю проходить у зоні заповнення. Це означає, що витікання не буде видно. Це може зменшити кількість втягувань для складних моделей і заощадити час друку, але сповільнює нарізку та генерацію G-коду. Зверніть увагу, що Z-hop також не виконується в зонах, де втягування пропускається." msgid "This option will drop the temperature of the inactive extruders to prevent oozing." msgstr "Цей параметр знижує температуру неактивних екструдерів, щоб запобігти підтіканням." msgid "Filename format" msgstr "Формат імені файлу" msgid "Users can decide project file names when exporting." msgstr "Користувач може самостійно визначити назву файлу проекту під час експорту" msgid "Make overhangs printable" msgstr "Зробити нависання можливими для друку" msgid "Modify the geometry to print overhangs without support material." msgstr "Змінює геометрію, щоб надрукувати нависання без підтримок." msgid "Make overhangs printable - Maximum angle" msgstr "Зробити нависання можливими для друку - Максимальний кут" msgid "Maximum angle of overhangs to allow after making more steep overhangs printable.90° will not change the model at all and allow any overhang, while 0 will replace all overhangs with conical material." msgstr "Максимальний кут нависань, щоб дозволити друк більш крутих нависань. 90° не змінює модель взагалі і дозволяє будь-які нависання, в той час як 0 замінює всі нависання конічним матеріалом." msgid "Make overhangs printable - Hole area" msgstr "Зробити нависання можливими для друку - Область отворів" msgid "Maximum area of a hole in the base of the model before it's filled by conical material. A value of 0 will fill all the holes in the model base." msgstr "Максимальна площа отвору в основі моделі перед заповненням його конічним матеріалом. Значення 0 заповнює всі отвори в основі моделі." msgid "Detect overhang walls" msgstr "Виявлення стінок що нависають" #, c-format, boost-format msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used." msgstr "Визначити відсоток нависання відносно до ширини лінії та використовувати для друку іншу швидкість. Для 100%%-вого нависання використовується швидкість моста." # AI Translated msgid "Outer walls" msgstr "Зовнішні стінки" # AI Translated msgid "" "Filament to print outer walls.\n" "\"Default\" uses the active object/part filament." msgstr "" "Філамент для друку зовнішніх стінок.\n" "\"Типовий\" використовує філамент активного обʼєкта/частини." # AI Translated msgid "Inner walls" msgstr "Внутрішні стінки" # AI Translated msgid "" "Filament to print inner walls.\n" "\"Default\" uses the active object/part filament." msgstr "" "Філамент для друку внутрішніх стінок.\n" "\"Типовий\" використовує філамент активного обʼєкта/частини." msgid "Line width of inner wall. If expressed as a %, it will be computed over the nozzle diameter." msgstr "Ширина лінії внутрішньої стінки. Якщо виражається у %, вона буде розрахована по діаметру сопла." msgid "This is the speed for inner walls." msgstr "Швидкість внутрішнього периметра" msgid "This is the number of walls per layer." msgstr "Кількість стінок кожного шару" msgid "Alternate extra wall" msgstr "Чергувати додаткову стінку" msgid "" "This setting adds an extra wall to every other layer. This way the infill gets wedged vertically between the walls, resulting in stronger prints.\n" "\n" "When this option is enabled, the ensure vertical shell thickness option needs to be disabled.\n" "\n" "Using lightning infill together with this option is not recommended as there is limited infill to anchor the extra perimeters to." msgstr "" "Цей параметр додає додаткову стінку до кожного другого шару. Таким чином, заповнення затискається вертикально між стінками, що призводить до більш міцних відбитків.\n" "\n" "Якщо цей параметр увімкнено, параметр Забезпечити вертикальну товщину оболонки потрібно вимкнути.\n" "\n" "Використання блискавичної заливки разом з цією опцією не рекомендується, оскільки кількість заливки, до якої можна прикріпити додаткові периметри, обмежена." msgid "If you want to process the output G-code through custom scripts, just list their absolute paths here. Separate multiple scripts with a semicolon. Scripts will be passed the absolute path to the G-code file as the first argument, and they can access the Orca Slicer config settings by reading environment variables." msgstr "Якщо ви хочете обробити вихідний G-код через користувацькі сценарії,Просто перерахуйте їх абсолютні шляхи тут. Розділіть кілька сценаріївточкою з комою. Сценаріям передається абсолютний шлях до файлу G-коду в як перший аргумент, і вони можуть отримати доступ до налаштувань Orca Slicer конфігурації шляхом читання змінних середовища." # AI Translated msgid "Change extrusion role G-code (process)" msgstr "G-код зміни ролі екструзії (процес)" # AI Translated msgid "This G-code is inserted when the extrusion role is changed. It runs after the machine and filament extrusion role G-code." msgstr "Цей G-код вставляється при зміні ролі екструзії. Він виконується після G-коду зміни ролі екструзії принтера та філаменту." # AI Translated msgid "Plugins Used" msgstr "Використані плагіни" # AI Translated msgid "Plugin capabilities referenced by this preset, stored as name;uuid;capability." msgstr "Можливості плагінів, на які посилається цей пресет, зберігаються як name;uuid;capability." # AI Translated msgid "Python plugin(s) invoked at each slicing pipeline step to read and modify intermediate slicing data, including a final G-code post-processing step. Research/experimental." msgstr "Плагіни Python, що викликаються на кожному кроці конвеєра нарізки для читання та зміни проміжних даних нарізки, включно з фінальним кроком постобробки G-коду. Дослідницьке/експериментальне." msgid "Printer type" msgstr "Тип принтера" msgid "Type of the printer." msgstr "Тип принтера" msgid "Printer notes" msgstr "Нотатки для принтера" msgid "You can put your notes regarding the printer here." msgstr "Ви можете залишити свої примітки щодо принтера тут." msgid "Printer variant" msgstr "Варіант принтера" msgid "Raft contact Z distance" msgstr "Відстань Z контакту підкладки" msgid "Z gap between raft and object. If Support Top Z Distance is 0, this value is ignored and the object is printed in direct contact with the raft (no gap)." msgstr "Z-зазор між підкладкою та моделлю. Якщо верхній Z-зазор підтримки дорівнює 0, це значення ігнорується, і модель друкується в прямому контакті з підкладкою (без зазору)." msgid "Raft expansion" msgstr "Розширення підкладки" msgid "This expands all raft layers in XY plane." msgstr "Розширити всі шари підкладки в площині XY" msgid "First layer density" msgstr "Початкова щільність шару" msgid "This is the density of the first raft or support layer." msgstr "Щільність першого шару підкладки або підтримки" msgid "First layer expansion" msgstr "Розширення початкового шару" msgid "This expands the first raft or support layer to improve bed adhesion." msgstr "Розширити перший шар підкладки або підтримки, щоб покращити прилипання до робочої поверхні" msgid "Raft layers" msgstr "Кількість шарів підкладки" msgid "Object will be raised by this number of support layers. Use this function to avoid warping when printing ABS." msgstr "Обʼєкт буде піднятий такою кількістю опорних шарів. Використовуйте цю функцію, щоб уникнути обтікання під час друку ABS" msgid "The G-code path is generated after simplifying the contour of models to avoid too many points and G-code lines. Smaller values mean higher resolution and more time required to slice." msgstr "Контур G-коду генерується після спрощення контуру моделей, щоб уникнути надмірної кількості точок і ліній G-коду. Менші значення означають вищу роздільну здатність і більше часу, необхідного для нарізки" msgid "Travel distance threshold" msgstr "Поріг відстані в дорозі" msgid "Only trigger retraction when the travel distance is longer than this threshold." msgstr "Втягувати тільки в тому випадку, якщо відстань переміщення перевищує цей поріг" msgid "Retract amount before wipe" msgstr "Обсяг втягування перед протиранням" msgid "This is the length of fast retraction before a wipe, relative to retraction length." msgstr "Довжина швидкого втягування перед протиранням, відносно довжини втягування" # AI Translated msgid "Retract amount after wipe" msgstr "Величина втягування після протирання" # AI Translated #, no-c-format, no-boost-format msgid "" "This is the length of fast retraction after wipe, relative to retraction length.\n" "The value will be clamped by 100% minus the retract amount before the wipe value." msgstr "" "Довжина швидкого втягування після протирання, відносно довжини втягування.\n" "Значення буде обмежено 100% мінус величина втягування перед протиранням." msgid "Retract on layer change" msgstr "Втягування при зміні шару" msgid "This forces a retraction on layer changes." msgstr "Примусове втягування при зміні шару" msgid "Retraction Length" msgstr "Довжина втягування" msgid "Some amount of material in extruder is pulled back to avoid ooze during long travel. Set zero to disable retraction." msgstr "Деяка кількість матеріалу в екструдері витягується назад, щоб уникнути витікання під час тривалого переміщення. Встановіть нуль, щоб відключити втягування" msgid "Long retraction when cut (beta)" msgstr "Довге втягування при відрізанні (експериментально)" msgid "Experimental feature: Retracting and cutting off the filament at a longer distance during changes to minimize purge. While this reduces flush significantly, it may also raise the risk of nozzle clogs or other printing problems." msgstr "Експериментальна функція. Втягування та відрізання філаменту на більшій відстані під час змін для мінімізації очищення. Хоча це значно зменшує обʼєм промивки, це також може збільшити ризик забивання сопла або інших проблем з друку." msgid "Retraction distance when cut" msgstr "Відстань втягування при відрізанні" msgid "Experimental feature: Retraction length before cutting off during filament change." msgstr "Експериментальна функція. Відстань втягування перед відрізанням під час зміни філаменту" # AI Translated msgid "Long retraction when extruder change" msgstr "Довге втягування при зміні екструдера" # AI Translated msgid "Retraction distance when extruder change" msgstr "Відстань втягування при зміні екструдера" # AI Translated msgid "Retraction Length (Toolchange)" msgstr "Довжина втягування (Зміна інструменту)" # AI Translated msgid "When retraction is triggered before changing tool, filament is pulled back by the specified amount (the length is measured on raw filament, before it enters the extruder)." msgstr "Коли втягування спрацьовує перед зміною інструменту, філамент відтягується на вказану величину (довжина вимірюється на необробленому філаменті, до його входу в екструдер)." msgid "Z-hop height" msgstr "Висота Z-підйому" msgid "Whenever there is a retraction, the nozzle is lifted a little to create clearance between the nozzle and the print. This prevents the nozzle from hitting the print when traveling more. Using spiral lines to lift Z can prevent stringing." msgstr "Під час кожного втягування сопло трохи піднімається, щоб створити зазор між соплом та об’єктом друку. Це запобігає зіткненню сопла з об’єктом друку під час переміщення. Використання спіральної лінії підняття по осі Z може запобігти появі ниток" msgid "Z-hop lower boundary" msgstr "Межа зниження Z-hop" msgid "Z-hop will only come into effect when Z is above this value and is below the parameter: \"Z-hop upper boundary\"." msgstr "Z-hop буде активуватися лише тоді, коли Z перевищує це значення і знаходиться нижче параметра “Верхня межа зниження Z”." msgid "Z-hop upper boundary" msgstr "Верхня межа зниження Z" msgid "If this value is positive, Z-hop will only come into effect when Z is above the parameter: \"Z-hop lower boundary\" and is below this value." msgstr "Якщо це значення позитивне, то Z-hop буде діяти лише тоді, коли Z перевищує параметр “Межа зниження Z” і знаходиться нижче цього значення" msgid "Z-hop type" msgstr "Тип Z-підйому" # AI Translated msgid "Type of Z-hop." msgstr "Тип Z-hop." msgid "Slope" msgstr "Схил" msgid "Spiral" msgstr "Спіраль" msgid "Traveling angle" msgstr "Кут переміщення" msgid "Traveling angle for Slope and Spiral Z-hop type. Setting it to 90° results in Normal Lift." msgstr "Кут переміщення для типів підйому Z Slope і Spiral. Встановлення значення 90° призведе до звичайного підйому" msgid "Only lift Z above" msgstr "Підіймати Z лише вище" msgid "If you set this to a positive value, Z lift will only take place above the specified absolute Z." msgstr "Якщо ви встановите додатне значення, підйом Z відбуватиметься лише над вказаний абсолютний висоті Z." msgid "Only lift Z below" msgstr "Підіймати Z лише нижче" msgid "If you set this to a positive value, Z lift will only take place below the specified absolute Z." msgstr "Якщо встановити додатне значення, підйом по Z відбуватиметься лише нижче вказаний абсолютний висоті Z." msgid "On surfaces" msgstr "На поверхнях" msgid "Enforce Z-Hop behavior. This setting is impacted by the above settings (Only lift Z above/below)." msgstr "Увімкнути поведінку стрибків Z. На цей параметр впливають попередні налаштування (Тільки піднімати Z вище/нижче)." msgid "All Surfaces" msgstr "Усі поверхні" msgid "Top Only" msgstr "Тільки вгорі" msgid "Bottom Only" msgstr "Тільки знизу" msgid "Top and Bottom" msgstr "Зверху та знизу" msgid "Direct Drive" msgstr "Direct Drive" msgid "Bowden" msgstr "Боуден" msgid "Hybrid" msgstr "Гібрид" # AI Translated msgid "Enable filament dynamic map" msgstr "Увімкнути динамічне зіставлення філаментів" # AI Translated msgid "Enable dynamic filament mapping during print." msgstr "Увімкнути динамічне зіставлення філаментів під час друку." msgid "Has filament switcher" msgstr "Має перемикач філаменту" msgid "Printer has a filament switcher hardware (e.g., AMS)." msgstr "Принтер має обладнання для перемикання філаменту (напр.: AMS)." msgid "Extra length on restart" msgstr "Додаткова довжина під час перезавантаження" msgid "When the retraction is compensated after the travel move, the extruder will push this additional amount of filament. This setting is rarely needed." msgstr "Коли втягування компенсується після переміщення, екструдер проштовхуєЦе додаткова кількість нитки. Ця установка рідко потрібна." # AI Translated msgid "Extra length on restart (Toolchange)" msgstr "Додаткова довжина під час перезавантаження (Зміна інструменту)" msgid "When the retraction is compensated after changing tool, the extruder will push this additional amount of filament." msgstr "Коли втягування компенсується після заміни інструменту, екструдерпроштовхує цю додаткову кількість нитки." msgid "Retraction speed" msgstr "Швидкість втягування" msgid "Speed for retracting filament from the nozzle." msgstr "Швидкість втягування філаменту зі сопла." msgid "Deretraction speed" msgstr "Швидкість компенсуючого втягування" msgid "Speed for reloading filament into the nozzle. Zero means same speed of retraction." msgstr "Швидкість перезавантаження філаменту в сопло. Нуль означає та сама швидкість, що і втягування." msgid "Deretraction speed (extruder change)" msgstr "Швидкість компенсуючого втягування (зміна екструдера)" msgid "Speed for reloading filament into the nozzle when switching extruder." msgstr "Швидкість перезавантаження філаменту в соплі під час перемикання екструдера." msgid "Use firmware retraction" msgstr "Використовувати втягування прошивки" msgid "This experimental setting uses G10 and G11 commands to have the firmware handle the retraction. This is only supported in recent Marlin." msgstr "Це експериментальне налаштування використовує команди G10 і G11 для того, щоб Мікропрограмне забезпечення обробляло ретракт. Це підтримується тількиу недавньому Марліні." msgid "Show auto-calibration marks" msgstr "Показати мітки автоматичного калібрування" msgid "Disable set remaining print time" msgstr "Вимкнути опцію Час друку що залишився" msgid "Disable generating of the M73: Set remaining print time in the final G-code." msgstr "Вимкнути генерацію M73: Встановити час друку, що залишився, у кінцевому gcode" msgid "Seam position" msgstr "Розташування шва" msgid "This is the starting position for each part of the outer wall." msgstr "Початкове положення для друку кожної частини зовнішнього периметра" msgid "Nearest" msgstr "Найближче" msgid "Aligned" msgstr "Вирівняне" # AI Translated msgid "Aligned back" msgstr "Вирівняний ззаду" msgid "Back" msgstr "Ззаду" msgid "Random" msgstr "Випадкове" msgid "Staggered inner seams" msgstr "Зміщувати внутрішній шов" msgid "This option causes the inner seams to be shifted backwards based on their depth, forming a zigzag pattern." msgstr "Ця опція змушує внутрішні шви зміщуватися у зворотному напрямку відповідно до їх глибини, утворюючи зигзагоподібний порядок." msgid "Seam gap" msgstr "Зазор шва" msgid "" "In order to reduce the visibility of the seam in a closed loop extrusion, the loop is interrupted and shortened by a specified amount.\n" "This amount can be specified in millimeters or as a percentage of the current extruder diameter. The default value for this parameter is 10%." msgstr "" "Щоб зменшити видимість шва при екструзії із замкнутим контуром, контур переривається і коротшає на задану величину.\n" "Ця кількість може бути вказана в міліметрах або у відсотках від поточногодіаметр екструдера. Стандартне значення для цього параметра становить 10%." msgid "Scarf joint seam (beta)" msgstr "Шарфовий шов (бета)" msgid "Use scarf joint to minimize seam visibility and increase seam strength." msgstr "Використовувати зʼєднання шва шарфом, щоб мінімізувати видимість шва та збільшити міцність шва." msgid "Conditional scarf joint" msgstr "Шарфовий шов за потреби" msgid "Apply scarf joints only to smooth perimeters where traditional seams do not conceal the seams at sharp corners effectively." msgstr "Застосовувати шарфове зʼєднання лише на гладких периметрах, де звичайні шви неможливо приховати в гострих кутах." msgid "Conditional angle threshold" msgstr "Умовний поріг кута" msgid "" "This option sets the threshold angle for applying a conditional scarf joint seam.\n" "If the maximum angle within the perimeter loop exceeds this value (indicating the absence of sharp corners), a scarf joint seam will be used. The default value is 155°." msgstr "" "Ця опція встановлює поріговий кут для застосування умовного з’єднання шарфом.\n" "Якщо максимальний кут в межах периметрового контуру перевищує це значення (що свідчить про відсутність гострих кутів), використовується з’єднання шарфом. Значення за замовчуванням - 155°." msgid "Conditional overhang threshold" msgstr "Умовний поріг нависань" #, no-c-format, no-boost-format msgid "This option determines the overhang threshold for the application of scarf joint seams. If the unsupported portion of the perimeter is less than this threshold, scarf joint seams will be applied. The default threshold is set at 40% of the external wall's width. Due to performance considerations, the degree of overhang is estimated." msgstr "Ця опція визначає поріг нависання для застосування стрічкових швів. Якщо непідтримувана частина периметра менша за цей поріг, будуть застосовані стрічкові шви. За замовчуванням поріг встановлюється на рівні 40% від ширини зовнішньої стіни. З міркувань продуктивності оцінюється ступінь нависання." msgid "Scarf joint speed" msgstr "Швидкість шарфового зʼєднання" msgid "This option sets the printing speed for scarf joints. It is recommended to print scarf joints at a slow speed (less than 100 mm/s). It's also advisable to enable 'Extrusion rate smoothing' if the set speed varies significantly from the speed of the outer or inner walls. If the speed specified here is higher than the speed of the outer or inner walls, the printer will default to the slower of the two speeds. When specified as a percentage (e.g., 80%), the speed is calculated based on the respective outer or inner wall speed. The default value is set to 100%." msgstr "Цей параметр задає швидкість друку швів. Рекомендується друкувати зʼєднувальні стрічки на повільній швидкості (менше 100 мм/с). Також рекомендується ввімкнути \"Згладжування швидкості екструзії\", якщо задана швидкість значно відрізняється від швидкості зовнішньої або внутрішньої стінок. Якщо вказана тут швидкість вища за швидкість зовнішньої або внутрішньої стінок, принтер за замовчуванням працюватиме на повільнішій з двох швидкостей. Якщо значення вказано у відсотках (наприклад, 80%), швидкість розраховується на основі відповідної швидкості зовнішньої або внутрішньої стінки. За замовчуванням встановлено значення 100%." msgid "Scarf joint flow ratio" msgstr "Коефіцієнт потоку шарфового шва" msgid "This factor affects the amount of material for scarf joints." msgstr "Цей фактор впливає на кількість матеріалу для зʼєднання швів." msgid "Scarf start height" msgstr "Початкова висота шарфа" msgid "" "Start height of the scarf.\n" "This amount can be specified in millimeters or as a percentage of the current layer height. The default value for this parameter is 0." msgstr "" "Початкова висота шарфа.\n" "Ця величина може бути вказана в міліметрах або як відсоток від поточної висоти шару. Значення за замовчуванням для цього параметра - 0." msgid "Scarf around entire wall" msgstr "Шарф вздовж всієї стіни" msgid "The scarf extends to the entire length of the wall." msgstr "Шарф простягається на всю довжину стіни." msgid "Scarf length" msgstr "Довжина шарфа" msgid "Length of the scarf. Setting this parameter to zero effectively disables the scarf." msgstr "Довжина шарфа. Встановлення цього параметра на нуль ефективно вимикає шарф." msgid "Scarf steps" msgstr "Кроки шарфа" msgid "Minimum number of segments of each scarf." msgstr "Мінімальна кількість сегментів кожного шарфу." msgid "Scarf joint for inner walls" msgstr "З’єднання з шарфом для внутрішніх стін" msgid "Use scarf joint for inner walls as well." msgstr "Використовувати з’єднання з шарфом також для внутрішніх стін." msgid "Role base wipe speed" msgstr "Швидкість протирання залежно від типу" msgid "The wipe speed is determined by the speed of the current extrusion role. e.g. if a wipe action is executed immediately following an outer wall extrusion, the speed of the outer wall extrusion will be utilized for the wipe action." msgstr "Швидкість протирання визначається швидкістю поточної ролі екструзії. Наприкладякщо дія очищення виконується відразу після екструзії зовнішнього периметра,швидкість екструзії зовнішнього периметра буде використовуватися для діїочищення." msgid "Wipe on loops" msgstr "Протирати на контурах" msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop." msgstr "Щоб звести до мінімуму видимість шва при екструзії із замкнутим контуром,Невеликий рух усередину виконується до виходу екструдера з контуру." msgid "Wipe before external loop" msgstr "Протирати перед зовнішнім контуром" msgid "" "To minimize visibility of potential overextrusion at the start of an external perimeter when printing with Outer/Inner or Inner/Outer/Inner wall print order, the de-retraction is performed slightly on the inside from the start of the external perimeter. That way any potential over extrusion is hidden from the outside surface.\n" "\n" "This is useful when printing with Outer/Inner or Inner/Outer/Inner wall print order as in these modes it is more likely an external perimeter is printed immediately after a de-retraction move." msgstr "" "Щоб мінімізувати видимість потенційного надмірного видавлювання на початку зовнішнього периметра під час друку з опцією друку стінок \"Зовнішній/внутрішній\" або \"Внутрішній/зовнішній/внутрішній\", втягування виконується злегка зсередини від початку зовнішнього периметра. Таким чином, будь-який потенційний надлишок накату приховується від зовнішньої поверхні.\n" "\n" "Це корисно під час друку із зовнішнім/внутрішнім або внутрішнім/зовнішнім/внутрішнім друком стінок, оскільки в цих режимах, найімовірніше, зовнішній периметр буде надруковано одразу після руху втягування." msgid "Wipe speed" msgstr "Швидкість протирання" msgid "The wipe speed is determined by the speed setting specified in this configuration. If the value is expressed as a percentage (e.g. 80%), it will be calculated based on the travel speed setting above. The default value for this parameter is 80%." msgstr "Швидкість протирання визначається налаштуванням швидкості, зазначеної в данійконфігурації. Якщо це значення виражено у відсотках (наприклад, 80%), то воно буде розраховано на основі наведеної вище установки швидкості руху. За замовчуванням для цього параметра - 80%" msgid "Skirt distance" msgstr "Відступ спідниці" msgid "This is the distance from the skirt to the brim or the object." msgstr "Відстань між спідницею та каймою або моделлю" msgid "Skirt start point" msgstr "Початкова точка спідниці" msgid "Angle from the object center to skirt start point. Zero is the most right position, counter clockwise is positive angle." msgstr "Кут від центру обʼєкта до початкової точки спідниці. Нуль - це найбільш права позиція, позитивний кут - проти годинникової стрілки." msgid "Skirt height" msgstr "Висота спідниці" msgid "Number of skirt layers: usually only one" msgstr "Скільки буде шарів спідниці. Зазвичай лише один шар" # AI Translated msgid "Single loop after first layer" msgstr "Одна петля після першого шару" # AI Translated msgid "Limits the skirt/draft shield loops to one wall after the first layer. This is useful, on occasion, to conserve filament but may cause the draft shield/skirt to warp / crack." msgstr "Обмежує петлі спідниці/захисного екрана однією стінкою після першого шару. Іноді це корисно для економії філаменту, але може призвести до викривлення чи розтріскування захисного екрана/спідниці." msgid "Draft shield" msgstr "Захисний екран" msgid "" "A draft shield is useful to protect an ABS or ASA print from warping and detaching from print bed due to wind draft. It is usually needed only with open frame printers, i.e. without an enclosure.\n" "\n" "Enabled = skirt is as tall as the highest printed object. Otherwise 'Skirt height' is used.\n" "Note: With the draft shield active, the skirt will be printed at skirt distance from the object. Therefore, if brims are active it may intersect with them. To avoid this, increase the skirt distance value.\n" msgstr "" "Захисний екран буде корисним для захисту друку ABS або ASA від викривлення та відлипання від столу в наслідок протягу повітря. Зазвичай він потрібен для відкритих принтерів, які не мають закритої камери.\n" "\n" "Увімкнено = Спідниця буде тої ж висоти що і найвищий обʼєкт друку. Інакше буде застосовано параметр \"Висота спідниці\"\n" "До уваги: При увімкненому захисному екрані, спідниця буде надрукована на відстані від обʼєкту. Тому, якщо увімкнена кайма, вони можуть перетинатися. Щоб запобігти цьому, збільшіть значення відстані спідниці.\n" msgid "Enabled" msgstr "Увімкнуто" msgid "Skirt type" msgstr "Тип спідниці" msgid "Combined - single skirt for all objects, Per object - individual object skirt." msgstr "Обʼєднана - одна спідниця для всіх обʼєктів, Пообʼєктна - окрема спідниця для кожного обʼєкта." msgid "Per object" msgstr "Роздільна" msgid "Skirt loops" msgstr "Кількість контурів спідниці" msgid "This is the number of loops for the skirt. 0 means the skirt is disabled." msgstr "Кількість контурів для спідниці. Нуль означає відключення спідниці" msgid "Skirt speed" msgstr "Швидкість спідниці" msgid "Speed of skirt, in mm/s. Zero means use default layer extrusion speed." msgstr "Швидкість спідниці, у мм/с. Нуль означає використання звичайної швидкості екструзії шару." msgid "Skirt minimum extrusion length" msgstr "Мінімальна довжина екструзії спідниці" msgid "" "Minimum filament extrusion length in mm when printing the skirt. Zero means this feature is disabled.\n" "\n" "Using a non-zero value is useful if the printer is set up to print without a prime line.\n" "Final number of loops is not taking into account while arranging or validating objects distance. Increase loop number in such case." msgstr "" "Мінімальна довжина подачі філаменту у мм при друці спідниці. Нуль означає, що ця функція буде вимкнена.\n" "\n" "Значення більше нуля доречно використовувати, якщо принтер налаштований без підготовчої лінії.\n" "Остаточна кількість контурів не враховується при упорядкуванні або перевірці відстані обʼєктів. Збільшіть кількість контурів у такому разі." msgid "The printing speed in exported G-code will be slowed down when the estimated layer time is shorter than this value in order to get better cooling for these layers." msgstr "Швидкість друку в експортованому gcode буде уповільнена, коли розрахунковий час шару менше цього значення, щоб отримати найкраще охолодження для цих шарів" msgid "Minimum sparse infill threshold" msgstr "Мінімальний поріг часткового заповнення" msgid "Sparse infill areas which are smaller than this threshold value are replaced by internal solid infill." msgstr "Ділянки часткового заповнення, менші за порогове значення, замінюються внутрішнім суцільним заповненням" # AI Translated msgid "" "Filament to print internal solid infill.\n" "\"Default\" uses the active object/part filament." msgstr "" "Філамент для друку внутрішнього суцільного заповнення.\n" "\"Типовий\" використовує філамент активного обʼєкта/частини." # AI Translated msgid "" "Filament to print top surface.\n" "\"Default\" uses the active object/part filament." msgstr "" "Філамент для друку верхньої поверхні.\n" "\"Типовий\" використовує філамент активного обʼєкта/частини." # AI Translated msgid "" "Filament to print bottom surface.\n" "\"Default\" uses the active object/part filament." msgstr "" "Філамент для друку нижньої поверхні.\n" "\"Типовий\" використовує філамент активного обʼєкта/частини." msgid "Line width of internal solid infill. If expressed as a %, it will be computed over the nozzle diameter." msgstr "Ширина лінії внутрішнього суцільного заповнення. Якщо виражена у %, вона буде розрахована по діаметру сопла." msgid "This is the speed for internal solid infill, not including the top or bottom surface." msgstr "Швидкість внутрішнього твердого заповнення, а не верхньої та нижньої поверхні" # AI Translated msgid "This enables spiraling, which smooths out the Z moves of the outer contour and turns a solid model into a single walled print with solid bottom layers. The final generated model has no seam." msgstr "Це вмикає спіральний режим, який згладжує рухи по Z зовнішнього контуру та перетворює твердотільну модель на одностінний друк із суцільними нижніми шарами. Кінцева згенерована модель не має шва" msgid "Smooth Spiral" msgstr "Плавна спіраль" msgid "Smooth Spiral smooths out X and Y moves as well, resulting in no visible seam at all, even in the XY directions on walls that are not vertical." msgstr "Плавна спіраль згладжує переміщення по X та Y, що призводить до відсутності видимого шва, навіть у напрямках XY на стінах, які не є вертикальними" msgid "Max XY Smoothing" msgstr "Максимальне згладжування XY" # AI Translated #, no-c-format, no-boost-format msgid "Maximum distance to move points in XY to try to achieve a smooth spiral. If expressed as a %, it will be computed over nozzle diameter." msgstr "Максимальна відстань переміщення точок у XY для отримання гладкої спіралі. Якщо задано у %, вона обчислюється відносно діаметра сопла." msgid "Spiral starting flow ratio" msgstr "Коефіцієнт початкового потоку для спіралі" #, no-c-format, no-boost-format msgid "Sets the starting flow ratio while transitioning from the last bottom layer to the spiral. Normally the spiral transition scales the flow ratio from 0% to 100% during the first loop which can in some cases lead to under extrusion at the start of the spiral." msgstr "Задає початковий коефіцієнт потоку при переході з останнього нижнього шару до спіралі. Зазвичай спіральний перехід плавно збільшує коефіцієнт потоку від 0% до 100% під час проходу першого контуру, що може призвести до недостатньої подачі філаменту на початку спіралі." msgid "Spiral finishing flow ratio" msgstr "Коефіцієнт подачі матеріалу для спірального завершення" #, no-c-format, no-boost-format msgid "Sets the finishing flow ratio while ending the spiral. Normally the spiral transition scales the flow ratio from 100% to 0% during the last loop which can in some cases lead to under extrusion at the end of the spiral." msgstr "Задає кінцевий коефіцієнт потоку при завершенні спіралі. Зазвичай спіральний перехід плавно знижує коефіцієнт потоку від 100% до 0% під час проходу останнього контуру, що може призвести до недостатньої подачі філаменту у кінці спіралі." # AI Translated msgid "If smooth or traditional mode is selected, a timelapse video will be generated for each print. After each layer is printed, a snapshot is taken with the chamber camera. All of these snapshots are composed into a timelapse video when printing completes. If smooth mode is selected, the toolhead will move to the excess chute after each layer is printed and then take a snapshot. Since the melt filament may leak from the nozzle during the process of taking a snapshot, a prime tower is required for smooth mode to wipe the nozzle." msgstr "Якщо вибрано плавний або традиційний режим, для кожного друку буде згенеровано таймлапс-відео. Після друку кожного шару камерою термокамери робиться знімок. Усі ці знімки поєднуються в таймлапс-відео після завершення друку. Якщо вибрано плавний режим, після друку кожного шару головка переміщається до лотка для відходів і лише потім робиться знімок. Оскільки під час зйомки з сопла може витікати розплавлений філамент, для плавного режиму потрібна підготовча вежа для очищення сопла." msgid "Traditional" msgstr "Традиційний" msgid "Smooth" msgstr "Згладити" msgid "Farthest point timelapse" msgstr "Таймлапс найдальшої точки" msgid "When enabled, the timelapse snapshot is taken at the farthest point from camera instead of traveling to the wipe tower or excess chute. Only effective in traditional timelapse mode on non-I3 printers." msgstr "Якщо ввімкнено, знімок уповільненої зйомки робиться в найвіддаленішій точці від камери, а не до вежі стирання чи надлишкового жолоба. Ефективно лише в традиційному режимі сповільненої зйомки на принтерах, відмінних від I3." msgid "Temperature variation" msgstr "Зміна температури" #. TRN PrintSettings : "Ooze prevention" > "Temperature variation" msgid "Temperature difference to be applied when an extruder is not active. The value is not used when 'idle_temperature' in filament settings is set to non-zero value." msgstr "Різниця температури, яка застосовується, коли екструдер не активний. Значення не використовується, якщо в налаштуваннях філаменту параметр 'idle_temperature' встановлений на ненульове значення." msgid "∆℃" msgstr "∆℃" msgid "Preheat time" msgstr "Час підігріву" msgid "To reduce the waiting time after tool change, Orca can preheat the next tool while the current tool is still in use. This setting specifies the time in seconds to preheat the next tool. Orca will insert a M104 command to preheat the tool in advance." msgstr "" "Щоб зменшити час очікування після зміни інструмента, Orca може попередньо нагрівати наступний інструмент, поки поточний ще використовується. Цей параметр визначає час у секундах для попереднього нагрівання наступного інструмента.\n" "\n" "Orca вставить команду M104 для завчасного нагрівання інструмента." msgid "Preheat steps" msgstr "Кроки підігріву" msgid "Insert multiple preheat commands (e.g. M104.1). Only useful for Prusa XL. For other printers, please set it to 1." msgstr "Вставляє кілька команд попереднього нагріву (наприклад, M104.1). Корисно лише для Prusa XL. Для інших принтерів слід встановити значення 1." # AI Translated msgid "G-code written at the very top of the output file, before any other content. Useful for adding metadata that printer firmware reads from the first lines of the file (e.g. estimated print time, filament usage). Supports placeholders like {print_time_sec} and {used_filament_length}." msgstr "G-код, що записується на самому початку вихідного файлу, перед будь-яким іншим вмістом. Корисно для додавання метаданих, які прошивка принтера читає з перших рядків файлу (наприклад, орієнтовний час друку, витрата філаменту). Підтримує підстановки на кшталт {print_time_sec} та {used_filament_length}." msgid "Start G-code" msgstr "Початковий G-код" # AI Translated msgid "G-code added when starting a print." msgstr "G-код, що додається на початку друку." msgid "G-code added when the printer starts using this filament" msgstr "Стартовий G-code при запуску друку цим філаментом" msgid "Single Extruder Multi Material" msgstr "Мульти-матеріальний (ММ) друк з одним екструдером" msgid "Use single nozzle to print multi filament." msgstr "Використовувати одне сопло для друку декількома філаментами" msgid "Manual Filament Change" msgstr "Ручна заміна філаменту" msgid "Enable this option to omit the custom Change filament G-code only at the beginning of the print. The tool change command (e.g., T0) will be skipped throughout the entire print. This is useful for manual multi-material printing, where we use M600/PAUSE to trigger the manual filament change action." msgstr "Увімкніть цей параметр, щоб пропустити користувацький G-код зміни нитки лише на початку друку. Команда зміни інструмента (наприклад, T0) буде пропущена протягом усього друку. Це корисно для ручного друку на декількох матеріалах, де ми використовуємо M600/PAUSE для запуску ручної заміни нитки." # AI Translated msgid "Wipe tower type" msgstr "Тип вежі протирання" # AI Translated msgid "Choose the wipe tower implementation for multi-material prints. Type 1 is recommended for Bambu and Qidi printers with a filament cutter. Type 2 offers better compatibility with multi-tool and MMU printers and provide overall better compatibility." msgstr "Виберіть реалізацію вежі протирання для багатоматеріального друку. Тип 1 рекомендовано для принтерів Bambu та Qidi з відрізним механізмом філаменту. Тип 2 забезпечує кращу сумісність з багатоінструментальними та MMU-принтерами і загалом кращу сумісність." msgid "Type 1" msgstr "Тип 1" msgid "Type 2" msgstr "Тип 2" msgid "Purge in prime tower" msgstr "Очищати на підготовчій вежі" msgid "Purge remaining filament into prime tower." msgstr "Очистити від залишків філаменту на підготовчій вежі" msgid "Enable filament ramming" msgstr "Увімкнути накат нитки" # AI Translated msgid "Tool change on wipe tower" msgstr "Зміна інструмента на вежі протирання" # AI Translated msgid "Force the toolhead to travel to the wipe tower before issuing the tool change command (Tx). Only relevant for multi-extruder (multi-toolhead) printers using a Type 2 wipe tower. By default Orca skips the travel on multi-toolhead machines because the firmware handles the head swap, which can result in the Tx command being issued above the printed part. Enable this option if you want the tool change to always be issued above the wipe tower instead." msgstr "Примусово переміщати головку до вежі протирання перед видачею команди зміни інструмента (Tx). Стосується лише багатоекструдерних (багатоінструментальних) принтерів з вежею протирання типу 2. Типово Orca пропускає це переміщення на багатоінструментальних машинах, оскільки заміну головки виконує прошивка, через що команда Tx може бути видана над надрукованою деталлю. Увімкніть цю опцію, якщо хочете, щоб зміна інструмента завжди відбувалася над вежею протирання." # AI Translated msgid "Wait for temperature on wipe tower" msgstr "Очікувати температуру на вежі протирання" # AI Translated msgid "Pick up the new tool without waiting for it to reach printing temperature, travel to the wipe tower, and wait for the temperature there, right before purging. Ooze from the heat-up lands on the tower instead of the model, and the travel overlaps with the heating. Only relevant for multi-extruder (multi-toolhead) printers using a Type 2 wipe tower. The firmware or tool change macro must not wait for the temperature itself. When disabled, the temperature wait is issued right after the tool change command." msgstr "Бере новий інструмент, не чекаючи, доки він досягне температури друку, переміщується до вежі протирання й чекає на температуру там, безпосередньо перед промивкою. Матеріал, що витікає під час нагрівання, потрапляє на вежу, а не на модель, а переміщення збігається з нагріванням. Актуально лише для принтерів із кількома екструдерами (кількома головками), які використовують вежу протирання типу 2. Прошивка або макрос зміни інструменту не повинні самі чекати на температуру. Коли вимкнено, команда очікування температури видається одразу після команди зміни інструменту." msgid "No sparse layers (beta)" msgstr "Без розріджених шарів (бета)" msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." msgstr "Якщо увімкнено, вежа витирання не друкується на шарах без змін інструментів. На шарах із зміною інструменту екструдер рухатиметься вниз, щоб надрукувати вежу витирання. Користувач несе відповідальність за те, щоб не було зіткнення з друком." msgid "Prime all printing extruders" msgstr "Підготовка всіх друкуючих екструдерів" msgid "If enabled, all printing extruders will be primed at the front edge of the print bed at the start of the print." msgstr "Якщо увімкнено, усі друкуючі екструдери будуть отестовані на передньому краї друкарського столу перед початком друку." # AI Translated msgid "Toolchange ordering" msgstr "Порядок зміни інструментів" # AI Translated msgid "" "Determines the order of tool changes on each layer.\n" "- Default: Starts with the last used extruder to minimize tool changes.\n" "- Cyclic: Uses a fixed tool sequence each layer. This sacrifices speed for better surface quality, as the extra toolchanges allow layers more time to cool." msgstr "" "Визначає порядок зміни інструментів на кожному шарі.\n" "- Типовий: починає з останнього використаного екструдера, щоб мінімізувати кількість змін інструмента.\n" "- Циклічний: використовує фіксовану послідовність інструментів на кожному шарі. Це жертвує швидкістю заради кращої якості поверхні, оскільки додаткові зміни інструмента дають шарам більше часу на охолодження." msgid "Cyclic" msgstr "Циклічно" msgid "Slice gap closing radius" msgstr "Радіус закриття пробілів під час нарізування" msgid "Cracks smaller than 2x gap closing radius are being filled during the triangle mesh slicing. The gap closing operation may reduce the final print resolution, therefore it is advisable to keep the value reasonably low." msgstr "Під час розрізання тріщини на трикутну сітку заповнюються тріщини,менше ніж 2 радіуси замикання зазору. Операція закриття проміжку може зменшити кінцевий дозвіл друку, тому бажано підтримувати значення на досить низькому рівні." msgid "Slicing Mode" msgstr "Режим нарізки" msgid "Other" msgstr "Інший" msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model." msgstr "Використовуйте «парний-непарний» для моделей літаків 3DLabPrint. Використовуйте «Закрити отвори», щоб закрити всі отвори в моделі." msgid "Regular" msgstr "Звичайний" msgid "Even-odd" msgstr "Парний-непарний" msgid "Close holes" msgstr "Закрити отвори" msgid "Z offset" msgstr "Зміщення Z" msgid "This value will be added (or subtracted) from all the Z coordinates in the output G-code. It is used to compensate for bad Z endstop position: for example, if your endstop zero actually leaves the nozzle 0.3mm far from the print bed, set this to -0.3 (or fix your endstop)." msgstr "Це значення буде додано/вилучено до/з усіх координат Z у вихідному G-коді. Воно використовується для зрівноваження поганої кінцевої позиції Z: наприклад, якщо ваш кінцевий нуль фактично залишає сопло на 0,3 мм від полотна друку, встановіть його на значення -0,3 (або виправте ваш endstop)." msgid "Enable support" msgstr "Увімкнути підтримку" msgid "This enables support generation." msgstr "Увімкнути генерацію підтримки." msgid "Normal (auto) and Tree (auto) are used to generate support automatically. If Normal (manual) or Tree (manual) is selected, only support enforcers are generated." msgstr "Normal (auto) і Tree (auto) використовуються для автоматичного створення підтримок. Якщо вибрано Normal (manual) або Tree (manual), будуть створюватися лише примусові підтримки" msgid "Normal (auto)" msgstr "Звичайні (авто)" msgid "Tree (auto)" msgstr "Дерево (авто)" msgid "Normal (manual)" msgstr "Звичайні (ручні)" msgid "Tree (manual)" msgstr "Дерево (ручні)" msgid "Support/object XY distance" msgstr "Підтримка/обʼєкт XY відстань" msgid "This controls the XY separation between an object and its support." msgstr "Контролює відстань по XY між об’єктом та його опорою" msgid "Support/object first layer gap" msgstr "Проміжок між опорою/об’єктом та першим шаром" msgid "XY separation between an object and its support at the first layer." msgstr "Відстань XY між об’єктом та його опорою на першому шарі." msgid "Pattern angle" msgstr "Кут шаблону" msgid "Use this setting to rotate the support pattern on the horizontal plane." msgstr "Використовуйте цей параметр, щоб повернути шаблон підтримки в горизонтальній площині." msgid "On build plate only" msgstr "Тільки на робочій пластині" # AI Translated msgid "This setting only generates supports that begin on the build plate." msgstr "Цей параметр створює лише ті підтримки, що починаються від столу." msgid "Support critical regions only" msgstr "Підтримувати лише критичні області" msgid "Only create support for critical regions including sharp tail, cantilever, etc." msgstr "Створювати підтримку тільки для критичних областей, включаючи гострий хвіст,консоль і т.д." # AI Translated msgid "Ignore small overhangs" msgstr "Ігнорувати малі нависання" # AI Translated msgid "Ignore small overhangs that possibly don't require support." msgstr "Ігнорувати малі нависання, які, ймовірно, не потребують підтримок." msgid "Top Z distance" msgstr "Верхня відстань Z" msgid "Z gap between the support's top and object." msgstr "Z-зазор між верхом підтримки та моделлю." msgid "Bottom Z distance" msgstr "Нижня відстань Z" msgid "Z gap between the object and the support bottom. If Support Top Z Distance is 0 and the bottom has interface layers, this value is ignored and the support is printed in direct contact with the object (no gap)." msgstr "Z-зазор між моделлю та нижньою частиною підтримки. Якщо верхній Z-зазор підтримки дорівнює 0 і знизу є інтерфейсні шари, це значення ігнорується, і підтримка друкується в прямому контакті з моделлю (без зазору)." msgid "Support/raft base" msgstr "База підтримки/підкладки" # AI Translated msgid "" "Filament to print support base and raft.\n" "\"Default\" means no specific filament for support and current filament is used." msgstr "" "Філамент для друку основи підтримок та підкладки.\n" "«За замовчуванням» означає, що окремий філамент для підтримок не використовується, а береться поточний філамент" msgid "Avoid interface filament for base" msgstr "Уникати філаменту інтерфейсу для бази" msgid "Avoid using support interface filament to print support base if possible." msgstr "Уникайте використання філаменту інтерфейсу опори для друку опорної бази, якщо це можливо." msgid "Line width of support. If expressed as a %, it will be computed over the nozzle diameter." msgstr "Ширина лінії підтримки. Якщо вона виражена у %, то буде розрахована по діаметру сопла." msgid "Loop pattern interface" msgstr "Інтерфейс використовує шаблон контуру" msgid "This covers the top contact layer of the supports with loops. It is disabled by default." msgstr "Накрийте петлями верхній контактний шар опор. Вимкнено за замовчуванням." msgid "Support/raft interface" msgstr "Інтерфейс підтримки/підкладки" # AI Translated msgid "" "Filament to print support interface.\n" "\"Default\" means no specific filament for support interface and current filament is used." msgstr "" "Філамент для друку інтерфейсу підтримок.\n" "«За замовчуванням» означає, що окремий філамент для інтерфейсу підтримок не використовується, а береться поточний філамент" msgid "Top interface layers" msgstr "Верхній шар підтримки" # AI Translated msgid "This is the number of top interface layers." msgstr "Кількість верхніх інтерфейсних шарів." msgid "Bottom interface layers" msgstr "Нижні шари підтримки" msgid "Number of bottom interface layers." msgstr "Кількість шарів інтерфейсу на дні" msgid "Same as top" msgstr "Так само, як вище" msgid "Top interface spacing" msgstr "Відстань між верхніми інтерфейсами" # AI Translated msgid "" "Spacing of interface lines. Zero means solid interface.\n" "Force using solid interface when support ironing is enabled." msgstr "" "Інтервал ліній інтерфейсу. Нуль означає суцільний інтерфейс.\n" "Примусово використовується суцільний інтерфейс, коли увімкнено розгладжування підтримок." msgid "Bottom interface spacing" msgstr "Інтервал нижнього шару підтримки" # AI Translated msgid "This is the spacing of bottom interface lines. 0 means solid interface." msgstr "Відстань між нижніми інтерфейсними лініями. Нуль означає суцільний інтерфейс" # AI Translated msgid "This is the speed for support interfaces." msgstr "Швидкість друку інтерфейсу підтримок" msgid "Base pattern" msgstr "Основний шаблон" # AI Translated msgid "" "Line pattern of support.\n" "\n" "The Default option for Tree supports is Hollow, which means no base pattern. For other support types, the Default option is the Rectilinear pattern.\n" "\n" "NOTE: For Organic supports, the two walls are supported only with the Hollow/Default base pattern. The Lightning base pattern is supported only by Tree Slim/Strong/Hybrid supports. For the other support types, the Rectilinear will be used instead of Lightning." msgstr "" "Шаблон ліній підтримок.\n" "\n" "Типовою опцією для деревоподібних підтримок є Порожній, тобто без базового шаблону. Для інших типів підтримок типовою опцією є прямолінійний шаблон.\n" "\n" "ПРИМІТКА: для органічних підтримок дві стінки підтримуються лише з базовим шаблоном Порожній/Типовий. Базовий шаблон Блискавка підтримується лише підтримками Tree Slim/Strong/Hybrid. Для інших типів підтримок замість Блискавки використовуватиметься прямолінійний." msgid "Rectilinear grid" msgstr "Прямолінійна сітка" msgid "Hollow" msgstr "Порожній" msgid "Interface pattern" msgstr "Шаблон інтерфейсу" # AI Translated msgid "This is the line pattern for support interfaces. The default pattern for non-soluble support interfaces is Rectilinear while the default pattern for soluble support interfaces is Concentric." msgstr "Шаблон ліній інтерфейсу підтримок. Типовий шаблон для нерозчинного інтерфейсу підтримок — прямолінійний, а для розчинного — концентричний" msgid "Rectilinear Interlaced" msgstr "Прямолінійний черезрядковий" msgid "Base pattern spacing" msgstr "Інтервал основного шаблону" msgid "This determines the spacing between support lines." msgstr "Відстань між лініями підтримки" msgid "Normal support expansion" msgstr "Нормальне розширення підтримки" msgid "Expand (+) or shrink (-) the horizontal span of normal support." msgstr "Розширити (+) або зменшити (-) горизонтальний проліт підтримки" msgid "This is the speed for support." msgstr "Швидкість підтримки" msgid "" "Style and shape of the support. For normal support, projecting the supports into a regular grid will create more stable supports (default), while snug support towers will save material and reduce object scarring.\n" "For tree support, slim and organic style will merge branches more aggressively and save a lot of material (default organic), while hybrid style will create similar structure to normal support under large flat overhangs." msgstr "" "Стиль і форма підтримки. Для звичайної підтримки проектування опор на регулярну сітку створить більш стійкі опори (за замовчуванням), тоді як щільно прилягаючі підтримки заощадять матеріал і зменшать пошкодження обʼєкта.\n" "Для підтримок органічний, більш агресивно зʼєднує гілки та економить багато матеріалу (за замовчуванням органічний), тоді як гібридний стиль створить структуру, схожу на звичайну опору під великими пласкими нависаннями." msgid "Default (Grid/Organic)" msgstr "За замовчуванням (Сітка/Органічна)" msgid "Snug" msgstr "Обережні" msgid "Organic" msgstr "Органічні" msgid "Tree Slim" msgstr "Дерево тонкі" msgid "Tree Strong" msgstr "Дерево міцні" msgid "Tree Hybrid" msgstr "Дерево гібридні" msgid "Independent support layer height" msgstr "Незалежна висота шарів підтримки" msgid "Support layer uses layer height independent with object layer. This is to support customizing Z-gap and save print time. This option will be invalid when the prime tower is enabled." msgstr "Опорний шар використовує висоту шару, що не залежить від шару обʼєкта. Це необхідний для підтримки налаштування z-gap та збереження часу друку. Цей параметр буде неприпустимим, якщо увімкнено основну башту." msgid "Threshold angle" msgstr "Кут порога" # AI Translated msgid "" "Support will be generated for overhangs whose slope angle is below the threshold. The smaller this value is, the steeper the overhang that can be printed without support.\n" "Note: If set to 0, normal supports use the Threshold overlap instead, while tree supports fall back to a default value of 30." msgstr "" "Буде створена підтримка для нависань з кутом нахилу нижче порогу. Чим менше це значення, тим крутіше нависання можна надрукувати без підтримки.\n" "Примітка: Якщо встановлено значення 0, звичайні підтримки використовують перекриття порогу, тоді як органічні підтримки повертаються до значення за замовчуванням 30." msgid "Threshold overlap" msgstr "Поріг накладання" msgid "If threshold angle is zero, support will be generated for overhangs whose overlap is below the threshold. The smaller this value is, the steeper the overhang that can be printed without support." msgstr "Якщо пороговий кут дорівнює нулю, підтримка буде генеруватися для нависань, перекриття яких знаходиться нижче порогу. Чим менше це значення, тим крутіше нависання можна надрукувати без підтримки." msgid "Tree support branch angle" msgstr "Кут гілки опори дерева" msgid "This setting determines the maximum overhang angle that the branches of tree support are allowed to make. If the angle is increased, the branches can be printed more horizontally, allowing them to reach farther." msgstr "Цей параметр визначає максимальний кут нависань, який допускається для гілки деревоподібної підтримки. Якщо кут збільшено, гілки можуть друкуватись більш горизонтально, дозволяючи їм досягати більшої відстані." msgid "Preferred Branch Angle" msgstr "Бажаний кут повороту гілки" #. TRN PrintSettings: "Organic supports" > "Preferred Branch Angle" msgid "The preferred angle of the branches, when they do not have to avoid the model. Use a lower angle to make them more vertical and more stable. Use a higher angle for branches to merge faster." msgstr "Найкращий кут нахилу гілок, коли вони не повинні уникати моделі. Використовуйте менший кут, щоб зробити їх більш вертикальними та стійкими. Використовуйте вищий кут, щоб гілки швидше зливалися." msgid "Tree support branch distance" msgstr "Адаптивна висота шару" msgid "This setting determines the distance between neighboring tree support nodes." msgstr "Цей параметр визначає відстань між сусідніми вузлами підтримки дерева." msgid "Branch Density" msgstr "Щільність гілок" #. TRN PrintSettings: "Organic supports" > "Branch Density" msgid "Adjusts the density of the support structure used to generate the tips of the branches. A higher value results in better overhangs but the supports are harder to remove, thus it is recommended to enable top support interfaces instead of a high branch density value if dense interfaces are needed." msgstr "Регулює щільність опорної структури, яка використовується для створення кінчиків гілок. Вище значення призводить до кращих нависань, але опори важче видаляти, тому рекомендується увімкнути верхні опорні інтерфейси замість високого значення щільності гілок, якщо потрібні щільні інтерфейси." msgid "Auto brim width" msgstr "Автоматична ширина кайми" msgid "Enabling this option means the width of the brim for tree support will be automatically calculated." msgstr "Увімкнення цієї опції означає, що ширина кайми для деревоподібної підтримки буде розрахована автоматично" msgid "Tree support brim width" msgstr "Ширина кайми деревоподібної підтримки" msgid "Distance from tree branch to the outermost brim line." msgstr "Відстань від гілки дерева до останньої зовнішньої лінії кайми" msgid "Tip Diameter" msgstr "Діаметр кінчика" #. TRN PrintSettings: "Organic supports" > "Tip Diameter" msgid "Branch tip diameter for organic supports." msgstr "Діаметр кінчика гілки для органічних підтримок." msgid "Tree support branch diameter" msgstr "Діаметр гілки деревоподібної підтримки" msgid "This setting determines the initial diameter of support nodes." msgstr "Цей параметр визначає початковий діаметр опорних вузлів." #. TRN PrintSettings: #lmFIXME msgid "Branch Diameter Angle" msgstr "Діаметр гілки Кут нахилу гілок" #. TRN PrintSettings: "Organic supports" > "Branch Diameter Angle" msgid "The angle of the branches' diameter as they gradually become thicker towards the bottom. An angle of 0 will cause the branches to have uniform thickness over their length. A bit of an angle can increase stability of the organic support." msgstr "Кут нахилу діаметра гілок, оскільки вони поступово стають товстішими донизу. Кут 0 призведе до того, що гілки матимуть рівномірну товщину по всій довжині. Невеликий кут може збільшити стабільність органічної опори." msgid "Support wall loops" msgstr "Опорні стінові петлі" msgid "This setting specifies the count of support walls in the range of [0,2]. 0 means auto." msgstr "Ця налаштування визначає кількість опорних стінок в діапазоні [0,2]. 0 означає автоматичний режим." msgid "Tree support with infill" msgstr "Підтримка дерева із заповненням" msgid "This setting specifies whether to add infill inside large hollows of tree support." msgstr "Цей параметр визначає, чи слід додавати заповнення всередині великихПорожнини підтримки дерева" msgid "Ironing Support Interface" msgstr "Інтерфейс підтримки розгладжування" # AI Translated msgid "Ironing is using small flow to print on same height of support interface again to make it more smooth. This setting controls whether support interface being ironed. When enabled, support interface will be extruded as solid too." msgstr "Розгладжування використовує малий потік, щоб надрукувати на тій самій висоті поверх інтерфейсу підтримок і зробити його гладкішим. Це налаштування визначає, чи розгладжується інтерфейс підтримок. Якщо увімкнено, інтерфейс підтримок також екструдуватиметься суцільним." # AI Translated msgid "Support Ironing Pattern" msgstr "Шаблон розгладжування підтримок" # AI Translated msgid "Support Ironing flow" msgstr "Потік розгладжування підтримок" # AI Translated msgid "The amount of material to extrude during ironing. Relative to flow of normal support interface layer height. Too high value results in overextrusion on the surface." msgstr "Кількість матеріалу, що екструдується під час розгладжування. Відносно потоку для звичайної висоти шару інтерфейсу підтримок. Завелике значення призводить до надлишкової екструзії на поверхні." # AI Translated msgid "Support Ironing line spacing" msgstr "Інтервал ліній розгладжування підтримок" msgid "Activate temperature control" msgstr "Увімкнути контроль температури" msgid "" "Enable this option for automated chamber temperature control. This option activates the emitting of an M191 command before the \"machine_start_gcode\"\n" " which sets the chamber temperature and waits until it is reached. In addition, it emits an M141 command at the end of the print to turn off the chamber heater, if present.\n" "\n" "This option relies on the firmware supporting the M191 and M141 commands either via macros or natively and is usually used when an active chamber heater is installed." msgstr "" "Увімкніть цей параметр для автоматичного керування температурою камери. Цей параметр активує відправку команди M191 перед \"machine_start_gcode\", \n" "що задає температуру камери та очікує її досягнення. Крім того, в кінці друку він відправляє команду M141 для вимкнення нагрівача камери, якщо він присутній.\n" "\n" "Цей параметр залежить від підтримки команд M191 і M141 у мікропрограмі, як через макроси, так і нативно, і зазвичай використовується при встановленому активному нагрівачі камери." msgid "" "For high-temperature materials like ABS, ASA, PC, and PA, a higher chamber temperature can help suppress or reduce warping and potentially lead to higher interlayer bonding strength. However, at the same time, a higher chamber temperature will reduce the efficiency of air filtration for ABS and ASA.\n" "\n" "For PLA, PETG, TPU, PVA, and other low-temperature materials, this option should be disabled (set to 0) as the chamber temperature should be low to avoid extruder clogging caused by material softening at the heat break.\n" "\n" "If enabled, this parameter also sets a G-code variable named chamber_temperature, which can be used to pass the desired chamber temperature to your print start macro, or a heat soak macro like this: PRINT_START (other variables) CHAMBER_TEMP=[chamber_temperature]. This may be useful if your printer does not support M141/M191 commands, or if you desire to handle heat soaking in the print start macro if no active chamber heater is installed." msgstr "" "Для високо-температурних матеріалів, таких як ABS, ASA, PC і PA, підвищена температура камери може допомогти придушити або зменшити деформацію і потенційно покращити міцність міжшарового зʼєднання. Однак водночас вища температура камери знижує ефективність повітряної фільтрації для ABS і ASA.\n" "\n" "Для PLA, PETG, TPU, PVA та інших низько-температурних матеріалів цей параметр слід вимкнути (встановити 0), оскільки температура камери повинна бути низькою, щоб уникнути засмічення екструдера через розмʼякшення матеріалу в зоні теплового барʼєра.\n" "\n" "Якщо цей параметр увімкнено, він також встановлює змінну gcode під назвою chamber_temperature, яку можна використовувати для передавання бажаної температури камери у макрос запуску друку або макрос прогріву, наприклад:\n" "PRINT_START (інші змінні) CHAMBER_TEMP=[chamber_temperature].\n" "Це може бути корисним, якщо ваш принтер не підтримує команди M141/M191 або якщо ви хочете керувати прогрівом камери у макросі запуску друку за відсутності активного нагрівача камери." # AI Translated msgid "" "This is the chamber temperature at which printing should start, while the chamber continues heating toward the \"Target\" chamber temperature. For example, set the Target to 60 and the Minimal to 50 to begin printing once the chamber reaches 50℃, without waiting for the full 60℃.\n" "\n" "It sets a G-code variable named chamber_minimal_temperature, which can be passed to your print start macro or a heat soak macro, like this: PRINT_START (other variables) CHAMBER_MIN_TEMP=[chamber_minimal_temperature].\n" "\n" "Unlike the \"Target\" chamber temperature, this option does not emit any M141/M191 commands; it only exposes the value to your custom G-code. It should not exceed the \"Target\" chamber temperature." msgstr "" "Це температура камери, за якої має початися друк, поки камера продовжує нагріватися до «Цільової» температури камери. Наприклад, встановіть Цільову на 60, а Мінімальну на 50, щоб почати друк, щойно камера досягне 50℃, не чекаючи повних 60℃.\n" "\n" "Вона задає змінну G-коду з назвою chamber_minimal_temperature, яку можна передати у ваш макрос початку друку або макрос прогріву, наприклад так: PRINT_START (інші змінні) CHAMBER_MIN_TEMP=[chamber_minimal_temperature].\n" "\n" "На відміну від «Цільової» температури камери, ця опція не видає жодних команд M141/M191; вона лише надає значення вашому власному G-коду. Вона не повинна перевищувати «Цільову» температуру камери." msgid "Chamber minimal temperature" msgstr "Мінімальна температура камери" msgid "Nozzle temperature after the first layer" msgstr "Температура сопла для шарів після першого" msgid "Detect thin walls" msgstr "Виявлення тонкої стінки" msgid "This detects thin walls which can’t contain two lines and uses a single line to print. It may not print as well because it’s not a closed loop." msgstr "Виявляти тонкі стінки, товщина яких менше ніж ширина двох ліній і використовувати лише одну лінію для друку. Можуть бути надруковані не дуже добре, оскільки вони не являються замкнутим контуром" msgid "This G-code is inserted when filament is changed, including T commands to trigger tool change." msgstr "Цей gcode вставляється при зміні філаменту, включаючи команду T для запуску зміни інструменту" msgid "This G-code is inserted when the extrusion role is changed." msgstr "Цей gcode вставляється, коли змінюється роль екструзії" # AI Translated msgid "Change extrusion role G-code (filament)" msgstr "G-код зміни ролі екструзії (філамент)" # AI Translated msgid "This G-code is inserted when the extrusion role is changed for the active filament." msgstr "Цей G-код вставляється при зміні ролі екструзії для активного філаменту." msgid "Line width for top surfaces. If expressed as a %, it will be computed over the nozzle diameter." msgstr "Ширина лінії для верхніх поверхонь. Якщо виражено у %, вона буде розрахована по діаметру сопла." msgid "This is the speed for solid top surface infill." msgstr "Швидкість суцільного заповнення верхньої поверхні" msgid "Top shell layers" msgstr "Шари верхньої оболонки" # AI Translated msgid "This is the number of solid layers of top shell, including the top surface layer. When the thickness calculated by this value is thinner than the top shell thickness, the top shell layers will be increased" msgstr "Це кількість суцільних шарів верхньої оболонки, включаючи верхній поверхневий шар. Якщо товщина, розрахована за цим значенням, менша за товщину верхньої оболонки, то верхні шари оболонки будуть збільшені" msgid "Top shell thickness" msgstr "Товщина верхньої оболонки" # AI Translated msgid "The number of top solid layers is increased when slicing if the thickness calculated by top shell layers is thinner than this value. This can avoid having too thin a shell when layer height is small. 0 means that this setting is disabled and thickness of top shell is determined simply by the number of top shell layers." msgstr "Кількість верхніх суцільних шарів збільшується при нарізанні, якщо товщина, обчислена за шарами верхньої оболонки, менша за це значення. Це дозволяє уникнути занадто тонкої оболонки при невеликій висоті шару. 0 означає, що це налаштування вимкнено і товщина верхньої оболонки визначається лише кількістю шарів верхньої оболонки" # AI Translated msgid "Separated infills" msgstr "Роздільні заповнення" # AI Translated msgid "" "Centers the internal infill of each part on itself, as if it were sliced on its own, instead of on the whole assembly. Parts that touch or overlap are treated as one body and share a center; separate parts (or distinct 3D objects) each get their own.\n" "Useful when an assembly groups several objects that should each keep a consistent, self-centered infill.\n" "Affects line and grid patterns and rotation-template infills.\n" "Patterns locked to global coordinates (Gyroid, Honeycomb, TPMS, ...) are unaffected." msgstr "" "Центрує внутрішнє заповнення кожної частини на ній самій, ніби її нарізали окремо, а не на всій збірці. Частини, що торкаються або перекриваються, вважаються одним тілом і мають спільний центр; окремі частини (або різні 3D-обʼєкти) отримують власний.\n" "Корисно, коли збірка групує кілька обʼєктів, кожен з яких має зберігати узгоджене, самоцентроване заповнення.\n" "Впливає на лінійні та сіткові шаблони, а також на заповнення з шаблонами обертання.\n" "Шаблони, привʼязані до глобальних координат (Гіроїд, Медові стільники, TPMS, ...), не змінюються." # AI Translated msgid "Center surface pattern on" msgstr "Центрувати шаблон поверхні за" # AI Translated msgid "" "Chooses where the centering point of centered top/bottom surface patterns (Archimedean Chords, Octagram Spiral) is placed.\n" " - Each Surface: centers the pattern on every individual surface region, so each island is symmetric on its own.\n" " - Each Model: centers the pattern on each connected body. Parts that touch or overlap share one center; parts detached from the rest each get their own.\n" " - Each Assembly: uses a single shared center for the whole object or assembly." msgstr "" "Визначає, де розміщується точка центрування для центрованих шаблонів верхньої/нижньої поверхні (Хорди Архімеда, Спіральна октограма).\n" " - Кожна поверхня: центрує шаблон на кожній окремій області поверхні, тож кожен острівець симетричний сам по собі.\n" " - Кожна модель: центрує шаблон на кожному звʼязаному тілі. Частини, що торкаються або перекриваються, мають спільний центр; частини, відокремлені від решти, отримують власний.\n" " - Кожна збірка: використовує єдиний спільний центр для всього обʼєкта або збірки." msgid "Each Surface" msgstr "Кожна поверхня" msgid "Each Model" msgstr "Кожна модель" msgid "Each Assembly" msgstr "Кожна збірка" # AI Translated msgid "This is the speed at which traveling is done." msgstr "Швидкість, з якою виконується переміщення." msgid "Wipe while retracting" msgstr "Протирати під час втягування" # AI Translated msgid "This moves the nozzle along the last extrusion path when retracting to clean any leaked material on the nozzle. This can minimize blobs when printing a new part after traveling." msgstr "Переміщення сопла вздовж останнього шляху екструзії під час втягування, щоб очистити матеріал, який витік на соплі. Це дозволяє зменшити напливи під час друку нової деталі після переміщення" msgid "Wipe distance" msgstr "Протяжність протирання" msgid "" "Describe how long the nozzle will move along the last path when retracting.\n" "\n" "Depending on how long the wipe operation lasts, how fast and long the extruder/filament retraction settings are, a retraction move may be needed to retract the remaining filament.\n" "\n" "Setting a value in the retract amount before wipe setting below will perform any excess retraction before the wipe, else it will be performed after." msgstr "" "Опишіть, як довго сопло буде рухатися вздовж останньої траєкторії під час втягування.\n" "\n" "Залежно від тривалості операції витирання, швидкості та тривалості втягування екструдера/нитки, може знадобитися рух накату для нитки.\n" "\n" "Якщо встановити значення у параметрі \"Кількість втягування перед витиранням\" нижче, надлишкове втягування буде виконано перед витиранням, інакше воно буде виконано після нього." # AI Translated msgid "Mixed color sublayer" msgstr "Підшар змішаного кольору" # AI Translated msgid "Enable mixed color sublayer splitting. When enabled, layers containing mixed color filaments will be split into sub-layers to achieve color mixing effects." msgstr "Вмикає розбиття на підшари змішаного кольору. Коли увімкнено, шари, що містять філаменти змішаного кольору, розбиваються на підшари для отримання ефекту змішування кольорів." # AI Translated msgid "The wiping tower can be used to clean up residue on the nozzle and stabilize the chamber pressure inside the nozzle in order to avoid appearance defects when printing objects." msgstr "Вежа протирання може використовуватися для очищення залишків на соплі та стабілізації тиску в камері всередині сопла, щоб уникнути дефектів зовнішнього вигляду під час друку обʼєктів." msgid "Internal ribs" msgstr "Внутрішні ребра" msgid "Enable internal ribs to increase the stability of the prime tower." msgstr "Дозволити внутрішні ребра, щоб збільшити стабільність основної вежі." msgid "Purging volumes" msgstr "Обсяг очищення" msgid "Flush multiplier" msgstr "Множник промивки" msgid "The actual flushing volumes is equal to the flush multiplier value multiplied by the flushing volumes in the table." msgstr "Фактичні обʼєми промивки дорівнюють множнику промивки, помноженому на обсяг промивки в таблиці." msgid "Flush multiplier (Fast mode)" msgstr "Множник змиву (швидкий режим)" msgid "The flush multiplier used in fast purge mode." msgstr "Множник змиву використовується у режимі швидкого очищення." msgid "Prime volume" msgstr "Основний обʼєм" msgid "This is the volume of material to prime the extruder with on the tower." msgstr "Обʼєм матеріалу для підготовки екструдера на вежі." msgid "Prime volume mode" msgstr "Режим основного обʼєму" msgid "Selects how the wipe-tower prime and flush volumes are computed on multi-extruder printers." msgstr "Вибирає спосіб обчислення об’ємів для промивання та промивання на багатоекструдерних принтерах." msgid "Saving" msgstr "Зберігання" msgid "Fast" msgstr "Швидкий" msgid "This is the width of prime towers." msgstr "Ширина підготовчої вежі" msgid "Wipe tower rotation angle" msgstr "Кут повороту вежі протирання" msgid "Wipe tower rotation angle with respect to X axis." msgstr "Кут повороту вежі протирання за віссю Х." # AI Translated msgid "Brim width of prime tower, negative number means auto calculated width based on the height of prime tower." msgstr "Ширина кайми підготовчої вежі; відʼємне число означає автоматично обчислену ширину на основі висоти підготовчої вежі." msgid "Stabilization cone apex angle" msgstr "Кут нахилу вершини стабілізаційного конуса" msgid "Angle at the apex of the cone that is used to stabilize the wipe tower. Larger angle means wider base." msgstr "Кут на вершині конуса, який використовується для стабілізації вежі протирання. Чим більший кут, тим ширша основа." msgid "Maximum wipe tower print speed" msgstr "Максимальна швидкість друку вежі протирання" msgid "" "The maximum print speed when purging in the wipe tower and printing the wipe tower sparse layers. When purging, if the sparse infill speed or calculated speed from the filament max volumetric speed is lower, the lowest will be used instead.\n" "\n" "When printing the sparse layers, if the internal perimeter speed or calculated speed from the filament max volumetric speed is lower, the lowest will be used instead.\n" "\n" "Increasing this speed may affect the tower's stability as well as increase the force with which the nozzle collides with any blobs that may have formed on the wipe tower.\n" "\n" "Before increasing this parameter beyond the default of 90 mm/s, make sure your printer can reliably bridge at the increased speeds and that ooze when tool changing is well controlled.\n" "\n" "For the wipe tower external perimeters the internal perimeter speed is used regardless of this setting." msgstr "" "Максимальна швидкість друку під час продування у башті витирання та друку розріджених шарів у башті витирання. Якщо під час продування швидкість розрідженого заповнення або розрахована швидкість на основі максимальної обʼємної швидкості нитки нижча, замість неї використовуватиметься найнижча швидкість.\n" "\n" "Під час друку розріджених шарів, якщо швидкість по внутрішньому периметру або розрахована швидкість на основі максимальної обʼємної швидкості нитки нижча, буде використовуватися найнижча швидкість.\n" "\n" "Збільшення цієї швидкості може вплинути на стабільність башти, а також збільшити силу, з якою сопло стикається з будь-якими згустками, що можуть утворитися на башті витирання.\n" "\n" "Перш ніж збільшувати цей параметр понад значення за замовчуванням 90 мм/с, переконайтеся, що принтер може надійно працювати на підвищених швидкостях і що витікання під час заміни інструменту добре контролюється.\n" "\n" "Для зовнішніх периметрів вежі витирання використовується швидкість внутрішнього периметра незалежно від цього параметра." msgid "Wall type" msgstr "Тип стіни" # AI Translated msgid "" "Wipe tower outer wall type.\n" "1. Rectangle: The default wall type, a rectangle with fixed width and height.\n" "2. Cone: A cone with a fillet at the bottom to help stabilize the wipe tower.\n" "3. Rib: Adds four ribs to the tower wall for enhanced stability." msgstr "" "Тип зовнішньої стінки вежі протирання.\n" "1. Прямокутник: типовий тип стінки, прямокутник з фіксованою шириною та висотою.\n" "2. Конус: конус із заокругленням унизу, що допомагає стабілізувати вежу протирання.\n" "3. Ребро: додає до стінки вежі чотири ребра для більшої стійкості." msgid "Rectangle" msgstr "Прямокутник" msgid "Rib" msgstr "Ребро" msgid "Extra rib length" msgstr "Довжина додаткових ребер" # AI Translated msgid "Positive values can increase the size of the rib wall, while negative values can reduce the size. However, the size of the rib wall can not be smaller than that determined by the cleaning volume." msgstr "Додатні значення можуть збільшити розмір ребристої стінки, а відʼємні — зменшити його. Проте розмір ребристої стінки не може бути меншим за визначений обʼємом очищення." msgid "Rib width" msgstr "Ширина ребра" # AI Translated msgid "Rib width is always less than half the prime tower side length." msgstr "Ширина ребра завжди менша за половину довжини сторони підготовчої вежі." # AI Translated msgid "Fillet wall" msgstr "Заокруглена стінка" # AI Translated msgid "The wall of prime tower will fillet." msgstr "Стінка підготовчої вежі матиме заокруглення." msgid "The extruder to use when printing perimeter of the wipe tower. Set to 0 to use the one that is available (non-soluble would be preferred)." msgstr "Екструдер використаний для друку по периметру вежі проирання. Встановіть значення 0, щоб використовувати той, що є в наявності (бажано нерозчинний)." msgid "Purging volumes - load/unload volumes" msgstr "Обсяги очищення - обсяги завантаження/розвантаження" msgid "This vector saves required volumes to change from/to each tool used on the wipe tower. These values are used to simplify creation of the full purging volumes below." msgstr "Цей вектор зберігає необхідні обʼєми для заміни кожного інструменту, що використовується на вежі. Ці протирання значення використовуються для спрощення створення повних обʼємів очищення нижче." msgid "Skip points" msgstr "Пропустити точки" # AI Translated msgid "The wall of prime tower will skip the start points of wipe path." msgstr "Стінка підготовчої вежі пропускатиме початкові точки шляху протирання." msgid "Enable tower interface features" msgstr "Дозволити можливості інтерфейсу вежі" # AI Translated msgid "Enable optimized prime tower interface behavior when different materials meet." msgstr "Увімкнути оптимізовану поведінку інтерфейсу підготовчої вежі, коли зустрічаються різні матеріали." # AI Translated msgid "Cool down from interface boost during prime tower" msgstr "Охолодження після підвищення для інтерфейсу під час підготовчої вежі" # AI Translated msgid "When interface-layer temperature boost is active, set the nozzle back to print temperature at the start of the prime tower so it cools down during the tower." msgstr "Коли активне підвищення температури для інтерфейсного шару, повернути соплу температуру друку на початку підготовчої вежі, щоб воно охолоджувалося під час друку вежі." # AI Translated msgid "Infill gap" msgstr "Зазор заповнення" # AI Translated msgid "Infill gap." msgstr "Зазор заповнення." msgid "Purging after filament change will be done inside objects' infills. This may lower the amount of waste and decrease the print time. If the walls are printed with transparent filament, the mixed color infill will be visible. It will not take effect unless the prime tower is enabled." msgstr "Очищення після зміни філаменту буде виконуватися всередині заповнень об’єктів. Це може зменшити кількість відходів і скоротити час друку. Якщо стінки друкуються прозорим філаментом, заповнення зі змішаним кольором буде видимим. Це не буде мати впливу, якщо не ввімкнено вежу для підготовки філаменту." msgid "Purging after filament change will be done inside objects' support. This may lower the amount of waste and decrease the print time. It will not take effect unless a prime tower is enabled." msgstr "Очищення після зміни філаменту буде виконуватися всередині підтримки об’єктів. Це може зменшити кількість відходів і скоротити час друку. Це не буде мати впливу, якщо не ввімкнено вежу для підготовки філаменту." msgid "This object will be used to purge the nozzle after a filament change to save filament and decrease the print time. Colors of the objects will be mixed as a result. It will not take effect unless the prime tower is enabled." msgstr "Цей обʼєкт буде використаний для очищення сопла після зміни філаменту для економії філаменту та зменшення часу друку. В результаті кольори обʼєктів будуть змішані. Ця опція не набуде чинності, поки не включена підготовча вежа." msgid "Maximal bridging distance" msgstr "Максимальна мостова відстань" msgid "Maximal distance between supports on sparse infill sections." msgstr "Максимальна відстань між підтримками на ділянках часткового заповнення." msgid "Wipe tower purge lines spacing" msgstr "Відстань між лініями очищення на вежі протирання" msgid "Spacing of purge lines on the wipe tower." msgstr "Відстань між лініями очищення на вежі протирання." msgid "Extra flow for purging" msgstr "Додатковий потік для очищення" msgid "Extra flow used for the purging lines on the wipe tower. This makes the purging lines thicker or narrower than they normally would be. The spacing is adjusted automatically." msgstr "Додатковий потік для ліній очистки на вежі протирання. Це робить лінії очистки товщими або вужчими, ніж зазвичай. Відстань між лініями налаштовується автоматично." msgid "Idle temperature" msgstr "Температура очікування" msgid "Nozzle temperature when the tool is currently not used in multi-tool setups. This is only used when 'Ooze prevention' is active in Print Settings. Set to 0 to disable." msgstr "Температура сопла, коли інструмент наразі не використовується в багатоголових налаштуваннях. Використовується лише тоді, коли у параметрах друку активовано 'Запобігання підтікання'. Встановіть значення 0, щоб вимкнути." msgid "X-Y hole compensation" msgstr "Компенсація отвору XY" # AI Translated msgid "Holes in objects will expand or contract in the XY plane by the set value. Positive values make holes bigger and negative values make holes smaller. This function is used to adjust sizes slightly when objects have assembly issues." msgstr "Отвори обʼєктів будуть розширені або звужені в площині XY на задане значення. Позитивні значення роблять отвори більшими, а негативні — меншими. Ця функція використовується для незначного коригування розмірів, коли обʼєкти мають проблеми зі складанням" msgid "X-Y contour compensation" msgstr "Компенсація контуру XY" # AI Translated msgid "Contours of objects will expand or contract in the XY plane by the set value. Positive values make contours bigger and negative values make contours smaller. This function is used to adjust sizes slightly when objects have assembly issues." msgstr "Контури обʼєктів будуть розширені або звужені в площині XY на задане значення. Позитивні значення роблять контури більшими, а негативні — меншими. Ця функція використовується для незначного коригування розмірів, коли обʼєкти мають проблеми зі складанням" msgid "Convert holes to polyholes" msgstr "Перетворення отворів у поліотвори" msgid "" "Search for almost-circular holes that span more than one layer and convert the geometry to polyholes. Use the nozzle size and the (biggest) diameter to compute the polyhole.\n" "See http://hydraraptor.blogspot.com/2011/02/polyholes.html" msgstr "" "Знайдіть майже круглі отвори, які охоплюють більше одного шару, і перетворіть їхню геометрію в поліотвори. Використовуйте розмір сопла і (найбільший) діаметр, щоб обчислити багатокутний отвір.\n" "Дивіться http://hydraraptor.blogspot.com/2011/02/polyholes.html" msgid "Polyhole detection margin" msgstr "Межа виявлення полігону" #, no-c-format, no-boost-format msgid "" "Maximum defection of a point to the estimated radius of the circle.\n" "As cylinders are often exported as triangles of varying size, points may not be on the circle circumference. This setting allows you some leeway to broaden the detection.\n" "In mm or in % of the radius." msgstr "" "Максимальне відхилення точки від розрахункового радіуса кола.\n" "Оскільки циліндри часто експортуються як трикутники різного розміру, точки можуть не потрапляти на окружність кола. Цей параметр дає змогу розширити область виявлення.\n" "у мм або у % від радіуса." msgid "Polyhole twist" msgstr "Скручування полігонів" msgid "Rotate the polyhole every layer." msgstr "Повертайте полігон кожен шар." # AI Translated msgid "Maximum Polyhole edge count" msgstr "Максимальна кількість ребер поліотвору" # AI Translated msgid "" "Maximum number of polyhole edges\n" "This setting limits the amount of edges a polyhole can have" msgstr "" "Максимальна кількість ребер поліотвору\n" "Це налаштування обмежує кількість ребер, які може мати поліотвір" msgid "G-code thumbnails" msgstr "Мініатюри G-коду" msgid "Picture sizes to be stored into a .gcode and .sl1 / .sl1s files, in the following format: \"XxY, XxY, ...\"" msgstr "Розміри малюнків повинні зберігатися у файлах .gcode та .sl1/.sl1s, у наступному форматі: «XxY, XxY»,..." msgid "Format of G-code thumbnails" msgstr "Формат мініатюр G-коду" msgid "Format of G-code thumbnails: PNG for best quality, JPG for smallest size, QOI for low memory firmware." msgstr "Формат мініатюр G-коду: PNG для найкращої якості, JPG для найменшого розміру, QOI для прошивок з низьким обʼємом памʼяті" msgid "Use relative E distances" msgstr "Використовуйте відносні відстані E екструдера" msgid "Relative extrusion is recommended when using \"label_objects\" option. Some extruders work better with this option unchecked (absolute extrusion mode). Wipe tower is only compatible with relative mode. It is recommended on most printers. Default is checked." msgstr "Відносна екструзія рекомендується при використанні опції \"label_objects\". Деякі екструдери працюють краще, якщо ця опція не включена (режим абсолютної екструзії). Витираюча вежа сумісна лише з відносним режимом. Він рекомендується для більшості принтерів. За замовчуванням увімкнено" msgid "The classic wall generator produces walls with constant extrusion width and for very thin areas, gap-fill is used. The Arachne engine produces walls with variable extrusion width." msgstr "Класичний генератор стін виробляє стіни з постійною шириною екструзії, а для дуже тонких ділянок використовується заповнення прогалин. Двигун Arachne виробляє стіни зі змінною шириною екструзії." msgid "Arachne" msgstr "Arachne" msgid "Wall transition length" msgstr "Довжина переходу до периметру" # AI Translated msgid "When transitioning between different numbers of walls as the part becomes thinner, a certain amount of space is allotted to split or join the wall segments. It's expressed as a percentage over nozzle diameter." msgstr "При переході між різними кількостями стінок, коли деталь стає тоншою, для розділення або зʼєднання сегментів стінок виділяється певна кількість простору. Вона виражається у відсотках від діаметра сопла" msgid "Wall transitioning filter margin" msgstr "Поле фільтра під час переходу між периметрами" msgid "Prevent transitioning back and forth between one extra wall and one less. This margin extends the range of extrusion widths which follow to [Minimum wall width - margin, 2 * Minimum wall width + margin]. Increasing this margin reduces the number of transitions, which reduces the number of extrusion starts/stops and travel time. However, large extrusion width variation can lead to under- or overextrusion problems. It's expressed as a percentage over nozzle diameter." msgstr "Запобігання переходу назад і вперед між однією додатковою стінкою та однієї менше. Це поле розширює діапазон ширини видавлювання до [Мінімальна ширина стінки - поле, 2 * Мінімальна ширина стінки + поле].Збільшення цього запасу зменшує кількість переходів, що зменшуєкількість запусків/зупинок екструзії та час переміщення. Однак велика Зміна ширини екструзії може призвести до проблем недостатньої або надмірної екструзії. Він виражається у відсотках від діаметра сопла" msgid "Wall transitioning threshold angle" msgstr "Пороговий кут переходу між периметрами" msgid "When to create transitions between even and odd numbers of walls. A wedge shape with an angle greater than this setting will not have transitions and no walls will be printed in the center to fill the remaining space. Reducing this setting reduces the number and length of these center walls, but may leave gaps or overextrude." msgstr "Коли створювати переходи між парним та непарним числом периметрів. Форма Клина з кутом більше цього параметра не буде мати переходів, і периметри Не друкуватимуться в центрі для заповнення простору, що залишився.Зменшення цього параметра зменшує кількість та довжину цих центральнихпериметрів, але може залишати проміжки або надмірне витягування" msgid "Wall distribution count" msgstr "Лічильник розподілу за периметрами" msgid "The number of walls, counted from the center, over which the variation needs to be spread. Lower values mean that the outer walls don't change in width." msgstr "Кількість периметрів, що відраховується від центру, яким потрібно розкидати варіацію. Нижчі значення означають, що зовнішні периметри не змінюються по ширині" msgid "Minimum feature size" msgstr "Мінімальний розмір обʼєкта" # AI Translated msgid "Minimum thickness of thin features. Model features that are thinner than this value will not be printed, while features thicker than than this value will be widened to the minimum wall width. It's expressed as a percentage over nozzle diameter." msgstr "Мінімальна товщина тонких елементів. Елементи моделі, тонші за це значення, не друкуватимуться, а товщі за нього — будуть розширені до мінімальної ширини стінки. Задається у відсотках від діаметра сопла." msgid "Minimum wall length" msgstr "Мінімальна довжина стінок" msgid "" "Adjust this value to prevent short, unclosed walls from being printed, which could increase print time. Higher values remove more and longer walls.\n" "\n" "NOTE: Bottom and top surfaces will not be affected by this value to prevent visual gaps on the outside of the model. Adjust 'One wall threshold' in the Advanced settings below to adjust the sensitivity of what is considered a top-surface. 'One wall threshold' is only visible if this setting is set above the default value of 0.5, or if single-wall top surfaces is enabled." msgstr "Налаштуйте це значення, щоб запобігти друкуванню коротких незакритих стін, що може збільшити час друку. Вищі значення видаляють більше і довші стіни." # AI Translated msgid "Maximum wall resolution" msgstr "Максимальна роздільність стінки" # AI Translated msgid "This value determines the smallest wall line segment length in mm. The smaller you set this value, the more accurate and precise the walls will be." msgstr "Це значення визначає найменшу довжину сегмента лінії стінки в мм. Що меншим ви його задасте, то точнішими будуть стінки." # AI Translated msgid "Maximum wall deviation" msgstr "Максимальне відхилення стінки" # AI Translated msgid "The maximum deviation allowed when reducing the resolution for the 'Maximum wall resolution' setting. If you increase this, the print will be less accurate, but the G-Code will be smaller. 'Maximum wall deviation' limits 'Maximum wall resolution', so if the two conflict, 'Maximum wall deviation' takes precedence." msgstr "Максимальне відхилення, дозволене при зниженні роздільності для налаштування «Максимальна роздільність стінки». Якщо його збільшити, друк буде менш точним, але G-код — меншим. «Максимальне відхилення стінки» обмежує «Максимальну роздільність стінки», тож у разі конфлікту пріоритет має «Максимальне відхилення стінки»." msgid "First layer minimum wall width" msgstr "Мінімальна ширина стінки першого шару" msgid "The minimum wall width that should be used for the first layer is recommended to be set to the same size as the nozzle. This adjustment is expected to enhance adhesion." msgstr "Мінімальну ширину стінки, яку слід використовувати для першого шару, рекомендується встановлювати такого ж розміру, як і сопло. Очікується, що таке налаштування покращить прилипання." msgid "Minimum wall width" msgstr "Мінімальна товщина стінки" msgid "Width of the wall that will replace thin features (according to the Minimum feature size) of the model. If the Minimum wall width is thinner than the thickness of the feature, the wall will become as thick as the feature itself. It's expressed as a percentage over nozzle diameter." msgstr "Ширина периметра, яка замінить тонкі елементи (відповідно до Мінімальним розміром елемента) моделі. Якщо мінімальна ширина периметра менше товщини елемента, то товщина периметра дорівнюватиме товщині самого елемента. Він виражається у відсотках від діаметра сопла" msgid "Hotend change time" msgstr "Час зміни хотенду" msgid "Time to change hotend." msgstr "Час замінити хотенд." msgid "Hotend change" msgstr "Зміна хотенду" # AI Translated msgid "When changing the hotend, it is recommended to extrude a certain length of filament from the original nozzle. This helps minimize nozzle oozing." msgstr "Під час зміни хотенда рекомендується екструдувати певну довжину філаменту з початкового сопла. Це допомагає мінімізувати витікання із сопла." msgid "Extruder change" msgstr "Зміна екструдера" # AI Translated msgid "To prevent oozing, the nozzle will perform a reverse travel movement for a certain period after the ramming is complete. The setting define the travel time." msgstr "Щоб запобігти витіканню, сопло виконає зворотне переміщення протягом певного часу після завершення раммінгу. Це налаштування визначає час переміщення." # AI Translated msgid "To prevent oozing, the nozzle temperature will be cooled during ramming. Therefore, the ramming time must be greater than the cooldown time. 0 means disabled." msgstr "Щоб запобігти витіканню, температура сопла знижуватиметься під час раммінгу. Тому час раммінгу має бути більшим за час охолодження. 0 означає вимкнено." # AI Translated msgid "The maximum volumetric speed for ramming before extruder change, where -1 means using the maximum volumetric speed." msgstr "Максимальна обʼємна швидкість раммінгу перед зміною екструдера; -1 означає використання максимальної обʼємної швидкості." # AI Translated msgid "To prevent oozing, the nozzle temperature will be cooled during ramming. Note: only a cooldown command and fan activation are triggered, reaching the target temperature is not guaranteed. 0 means disabled." msgstr "Щоб запобігти витіканню, температура сопла знижуватиметься під час раммінгу. Примітка: спрацьовує лише команда охолодження та вмикання вентилятора, досягнення цільової температури не гарантується. 0 означає вимкнено." # AI Translated msgid "The maximum volumetric speed for ramming before a hotend change, where -1 means using the maximum volumetric speed." msgstr "Максимальна обʼємна швидкість раммінгу перед зміною хотенда; -1 означає використання максимальної обʼємної швидкості." # AI Translated msgid "length when change hotend" msgstr "довжина при зміні хотенда" # AI Translated msgid "When this retraction value is modified, it will be used as the amount of filament retracted inside the hotend before changing hotends." msgstr "Коли це значення втягування змінено, воно використовується як кількість філаменту, втягнутого всередині хотенда перед зміною хотендів." msgid "Support fast purge mode" msgstr "Підтримка режиму швидкого очищення" # AI Translated msgid "Whether this printer supports fast purge mode with optimized temperature and multiplier." msgstr "Чи підтримує цей принтер режим швидкого очищення з оптимізованою температурою та множником." # AI Translated msgid "Filament change" msgstr "Зміна філаменту" # AI Translated msgid "The volume of material required to prime the extruder on the tower, excluding a hotend change." msgstr "Обʼєм матеріалу, потрібний для підготовки екструдера на вежі, без урахування зміни хотенда." # AI Translated msgid "The volume of material required to prime the extruder for a hotend change on the tower." msgstr "Обʼєм матеріалу, потрібний для підготовки екструдера при зміні хотенда на вежі." # AI Translated msgid "Preheat temperature delta" msgstr "Різниця температур попереднього нагріву" # AI Translated msgid "Temperature delta applied during pre-heating before tool change." msgstr "Різниця температур, що застосовується під час попереднього нагріву перед зміною інструмента." msgid "Detect narrow internal solid infills" msgstr "Виявлення вузького внутрішнього суцільного заповнення" msgid "This option will auto-detect narrow internal solid infill areas. If enabled, the concentric pattern will be used for the area to speed up printing. Otherwise, the rectilinear pattern will be used by default." msgstr "Ця опція автоматично визначає вузькі ділянки внутрішню суцільного заповнення. Якщо цей параметр увімкнено, для ділянки буде застосовано концентричний шаблон, що прискорює друк. Інакше за умовчанням використовується прямолінійний шаблон." msgid "invalid value " msgstr "неправильне значення " msgid "Invalid value when spiral vase mode is enabled: " msgstr "Неприпустиме значення при увімкненому режимі спіральної вази: " # AI Translated msgid "Bridge line width must not exceed nozzle diameter: " msgstr "Ширина лінії моста не повинна перевищувати діаметр сопла: " msgid "too large line width " msgstr "надто велика ширина лінії " msgid " not in range " msgstr " не в зоні " msgid "Export 3MF" msgstr "Експортувати 3MF" msgid "This exports the project as a 3MF file." msgstr "Експортувати проєкт як 3MF." msgid "Export slicing data" msgstr "Експортувати дані нарізки" msgid "Export slicing data to a folder" msgstr "Експортувати дані нарізки у папку." msgid "Load slicing data" msgstr "Завантажити дані про нарізку" msgid "Load cached slicing data from directory." msgstr "Завантажити кешовані дані нарізки з каталогу" msgid "Export STL" msgstr "Експортувати STL" msgid "Export the objects as single STL." msgstr "Експортувати обʼєкти як єдиний STL." msgid "Export multiple STLs" msgstr "Експортувати декілька STL" msgid "Export the objects as multiple STLs to directory." msgstr "Експортувати обʼєкти як декілька STL у папку" msgid "Slice the plates: 0-all plates, i-plate i, others-invalid" msgstr "Нарізати пластини: 0-всі пластини, i-пластина i, інші-неприпустимі" msgid "This shows command help." msgstr "Показати довідку про команду." msgid "UpToDate" msgstr "До цього часу" msgid "Update the config values of 3MF to latest." msgstr "Оновіть значення конфігурації 3MF до останніх." msgid "Load default filaments" msgstr "Завантажити типові філаменти" msgid "Load first filament as default for those not loaded." msgstr "Завантажити перший філамент як стандартний для тих, що не завантажені" msgid "Minimum save" msgstr "Мінімум" msgid "Export 3MF with minimum size." msgstr "Експортувати 3MF з мінімальним розміром." msgid "mtcpp" msgstr "mtcpp" msgid "max triangle count per plate for slicing" msgstr "максимальна кількість трикутників на стіл для нарізки." msgid "mstpp" msgstr "mstpp" msgid "max slicing time per plate in seconds" msgstr "максимальний час нарізки на стіл у секундах." msgid "No check" msgstr "Без перевірки" # AI Translated msgid "Do not run any validity checks, such as G-code path conflicts check." msgstr "Не виконувати жодних перевірок дійсності, наприклад перевірку конфліктів шляхів G-коду." msgid "Normative check" msgstr "Нормативна перевірка" msgid "Check the normative items." msgstr "Перевірте нормативні позиції." msgid "Output Model Info" msgstr "Вихідна інформація про модель" msgid "This outputs the model’s information." msgstr "Виведіть інформацію про модель." msgid "Export Settings" msgstr "Експортувати налаштування" msgid "This exports settings to a file." msgstr "Експортувати налаштування у файл." msgid "Send progress to pipe" msgstr "Надіслати прогрес до каналу" msgid "Send progress to pipe." msgstr "Надіслати прогрес до каналу." msgid "Arrange Options" msgstr "Упорядкувати параметри" msgid "Arrange options: 0-disable, 1-enable, others-auto" msgstr "Параметри упорядкування: 0-disable, 1-enable, інші-auto" msgid "Repetition count" msgstr "Кількість повторень" msgid "Repetition count of the whole model." msgstr "Кількість повторень всієї моделі" msgid "Ensure on bed" msgstr "Переконайтеся, що на столі" msgid "Lift the object above the bed when it is partially below. Disabled by default." msgstr "Підніміть обʼєкт над ліжком, коли він частково знаходиться під ним. За замовчуванням вимкнено" msgid "Arrange the supplied models in a plate and merge them in a single model in order to perform actions once." msgstr "Розташувати поставлені моделі на платформі та об’єднати їх в одну модель, щоб виконати дії один раз." msgid "Convert Unit" msgstr "Перетворити одиницю виміру" msgid "Convert the units of model." msgstr "Перетворення одиниць моделі" msgid "Orient Options" msgstr "Параметри орієнтації" msgid "Orient options: 0-disable, 1-enable, others-auto" msgstr "Орієнтація: 0 - вимкнено, 1 - увімкнено, інші - автоматично" msgid "Rotation angle around the Z axis in degrees." msgstr "Кут обертання навколо осі Z у градусах." msgid "Rotate around X" msgstr "Обертання навколо X" msgid "Rotation angle around the X axis in degrees." msgstr "Кут обертання навколо осі Х у градусах." msgid "Rotate around Y" msgstr "Обертати навколо осі Y" msgid "Rotation angle around the Y axis in degrees." msgstr "Кут обертання навколо осі Y у градусах." msgid "Scale the model by a float factor." msgstr "Масштабуйте модель за допомогою плаваючого коефіцієнта" msgid "Load General Settings" msgstr "Завантажити загальні налаштування" msgid "Load process/machine settings from the specified file." msgstr "Завантажити налаштування процесу/машини із зазначеного файлу" msgid "Load Filament Settings" msgstr "Завантажити налаштування філаменту" msgid "Load filament settings from the specified file list." msgstr "Завантажити налаштування філаменту із зазначеного списку файлів" msgid "Skip Objects" msgstr "Пропустити обʼєкти" msgid "Skip some objects in this print." msgstr "Пропустити деякі обʼєкти в цьому принті" msgid "Clone Objects" msgstr "Клонувати обʼєкти" msgid "Clone objects in the load list." msgstr "Клонувати обʼєкти в списку завантаження" # AI Translated msgid "Load uptodate process/machine settings when using uptodate" msgstr "Завантажувати актуальні налаштування процесу/принтера при використанні uptodate" # AI Translated msgid "load up-to-date process/machine settings from the specified file when using up-to-date" msgstr "завантажувати актуальні налаштування процесу/принтера із зазначеного файлу при використанні up-to-date" # AI Translated msgid "Load uptodate filament settings when using uptodate" msgstr "Завантажувати актуальні налаштування філаменту при використанні uptodate" # AI Translated msgid "Load uptodate filament settings from the specified file when using uptodate." msgstr "Завантажувати актуальні налаштування філаменту із зазначеного файлу при використанні uptodate." # AI Translated msgid "Downward machines check" msgstr "Перевірка сумісності з попередніми машинами" # AI Translated msgid "If enabled, check whether current machine downward compatible with the machines in the list." msgstr "Якщо увімкнено, перевіряти, чи поточна машина сумісна з машинами зі списку." # AI Translated msgid "Downward machines settings" msgstr "Налаштування сумісності з попередніми машинами" # AI Translated msgid "The machine settings list needs to do downward checking." msgstr "Список налаштувань машин, для якого потрібно виконати перевірку сумісності." msgid "Load assemble list" msgstr "Завантажити список збірок" msgid "Load assemble object list from config file." msgstr "Завантажити список збірок обʼєктів з файлу конфігурації" msgid "Data directory" msgstr "Каталог даних" msgid "Load and store settings at the given directory. This is useful for maintaining different profiles or including configurations from a network storage." msgstr "Завантажити та зберегти налаштування в даному каталозі. Це корисно для підтримки різних профілів або для ввімкнення конфігурацій із сховища мережі." msgid "Output directory" msgstr "Вихідний каталог" msgid "This is the output directory for exported files." msgstr "Цільова папка для експортованих файлів." msgid "Debug level" msgstr "Рівень налагодження" msgid "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:trace\n" msgstr "Встановлює рівень зневадження. 0:фатальний, 1:помилка, 2:попередження, 3:інформація, 4:зневадження, 5:трасування\n" msgid "Log file" msgstr "Файл логів" msgid "Redirects debug logging to file.\n" msgstr "Перенаправляє журнал зневадження у файл.\n" msgid "Enable timelapse for print" msgstr "Увімкнути таймлапс для друку" msgid "If enabled, this slicing will be considered using timelapse." msgstr "Якщо ввімкнено, це нарізання враховуватиме використання таймлапсу" msgid "Load custom G-code" msgstr "Завантажити користувацький gcode" msgid "Load custom G-code from json." msgstr "Завантажити користувацький код з json" msgid "Load filament IDs" msgstr "Завантажувати id філаментів" msgid "Load filament IDs for each object." msgstr "Завантажувати id філаментів для кожного обʼєкта" msgid "Allow multiple colors on one plate" msgstr "Дозволити декілька кольорів на одній пластині" msgid "If enabled, Arrange will allow multiple colors on one plate." msgstr "Якщо ввімкнено, розташування дозволить використовувати кілька кольорів на одній платформі" msgid "Allow rotation when arranging" msgstr "Дозволити обертання під час розташування" msgid "If enabled, Arrange will allow rotation when placing objects." msgstr "Якщо ввімкнено, буде дозволено обертання під час розташування обʼєкта" msgid "Avoid extrusion calibrate region when arranging" msgstr "Уникати області калібрування екструзії під час розташування моделей" msgid "If enabled, Arrange will avoid extrusion calibrate region when placing objects." msgstr "Якщо ввімкнено, розташування моделей уникатиме області калібрування екструзії" msgid "Skip modified G-code in 3MF" msgstr "Пропустити змінені gcodes в 3MF" # AI Translated msgid "Skip the modified G-code in 3MF from printer or filament presets." msgstr "Пропускати змінений G-код у 3MF із пресетів принтера чи філаменту." msgid "MakerLab name" msgstr "Назва MakerLab" msgid "MakerLab name to generate this 3MF." msgstr "Назва MakerLab для створення цього 3MF." msgid "MakerLab version" msgstr "Версія MakerLab" msgid "MakerLab version to generate this 3MF." msgstr "Версія MakerLab для створення цього 3MF." msgid "Metadata name list" msgstr "список назв метаданих" msgid "Metadata name list added into 3MF." msgstr "список назв метаданих додано в 3MF." msgid "Metadata value list" msgstr "список значень метаданих" msgid "Metadata value list added into 3MF." msgstr "список значень метаданих додано в 3MF." msgid "Allow 3MF with newer version to be sliced" msgstr "Дозволити нарізання 3MF в новішій версії" msgid "Allow 3MF with newer version to be sliced." msgstr "Дозволити нарізання 3MF в новішій версії." msgid "Current Z-hop" msgstr "Поточний Z-стрибок" msgid "Contains Z-hop present at the beginning of the custom G-code block." msgstr "Містить Z-стрибок, присутній на початку користувацького блоку G-коду." msgid "Position of the extruder at the beginning of the custom G-code block. If the custom G-code travels somewhere else, it should write to this variable so OrcaSlicer knows where it travels from when it gets control back." msgstr "Позиція екструдера на початку блоку користувацького G-коду. Якщо користувацький G-код переміщується в інше місце, він повинен бути записаний в цю змінну, щоб PrusaSlicer знав, звідки він переміщується, коли він отримає керування назад." msgid "Retraction state at the beginning of the custom G-code block. If the custom G-code moves the extruder axis, it should write to this variable so OrcaSlicer de-retracts correctly when it gets control back." msgstr "Стан втягування на початку блоку користувацького G-коду. Якщо користувацький G-код переміщує вісь екструдера, він повинен записати в цю змінну, щоб PrusaSlicer коректно робив накат, коли повертає керування." msgid "Extra de-retraction" msgstr "Додаткове втягування" msgid "Currently planned extra extruder priming after de-retraction." msgstr "В даний час планується додаткове ґрунтування екструдера після накату." msgid "Absolute E position" msgstr "Абсолютна позиція E" msgid "Current position of the extruder axis. Only used with absolute extruder addressing." msgstr "Поточна позиція осі екструдера. Використовується тільки при абсолютному адресуванні екструдера." msgid "Current extruder" msgstr "Поточний екструдер" msgid "Zero-based index of currently used extruder." msgstr "Нульовий індекс екструдера, що використовується в даний момент." msgid "Current object index" msgstr "Поточний індекс обʼєкту" msgid "Specific for sequential printing. Zero-based index of currently printed object." msgstr "Специфічний для послідовного друку. Нульовий індекс обʼєкта, що друкується в даний момент." msgid "Has wipe tower" msgstr "Має вежу протирання" msgid "Whether or not wipe tower is being generated in the print." msgstr "Створювати або ні вежу протирання при друці." msgid "Initial extruder" msgstr "Початковий екструдер" msgid "Zero-based index of the first extruder used in the print. Same as initial_tool." msgstr "Нульовий індекс першого екструдера, що використовується у друці. Те саме, що й initial_tool." msgid "Initial tool" msgstr "Початковий інструмент" msgid "Zero-based index of the first extruder used in the print. Same as initial_extruder." msgstr "Нульовий індекс першого екструдера, що використовується у друці. Те саме, що й initial_extruder." msgid "Is extruder used?" msgstr "Чи використовується екструдер?" msgid "Vector of booleans stating whether a given extruder is used in the print." msgstr "Вектор bool, що вказує на те, чи використовується даний екструдер у друці." msgid "Number of extruders" msgstr "Кількість екструдерів" msgid "Total number of extruders, regardless of whether they are used in the current print." msgstr "Загальна кількість екструдерів, незалежно від того, чи використовуються вони в поточному друці." msgid "Has single extruder MM priming" msgstr "Є перед-заряджання одиночного багато-кольорового екструдера" msgid "Are the extra multi-material priming regions used in this print?" msgstr "Чи використовуються в цій печатці додаткові області перед-зарядки для декількох матеріалів?" msgid "Volume per extruder" msgstr "Обʼєм на один екструдер" msgid "Total filament volume extruded per extruder during the entire print." msgstr "Загальний обʼєм філаменту, екструдованого одним екструдером за весь друк." msgid "Total tool changes" msgstr "Повні зміни інструменту" msgid "Number of tool changes during the print." msgstr "Кількість замін під час друку." msgid "Total volume" msgstr "Загальний обсяг" msgid "Total volume of filament used during the entire print." msgstr "Загальний об’єм філаменту, використаного під час усього друку." msgid "Weight per extruder" msgstr "Вага одного екструдера" msgid "Weight per extruder extruded during the entire print. Calculated from filament_density value in Filament Settings." msgstr "Вага на один екструдер, що видавлюється протягом усього друку." msgid "Total weight" msgstr "Загальна вага" msgid "Total weight of the print. Calculated from filament_density value in Filament Settings." msgstr "Загальна вага друку. Розраховується на основі значення filament_density у налаштуваннях Filament." msgid "Total layer count" msgstr "Загальна кількість шарів" msgid "Number of layers in the entire print." msgstr "Кількість шарів усього друку." msgid "Print time (normal mode)" msgstr "Час друку (звичайний режим)" msgid "Estimated print time when printed in normal mode (i.e. not in silent mode). Same as print_time." msgstr "Розрахунковий час друку у звичайному режимі (тобто не в тихому режимі). Те саме, що і 'Час друку (звичайний режим)'(print_time)." msgid "Estimated print time when printed in normal mode (i.e. not in silent mode). Same as normal_print_time." msgstr "Розрахунковий час друку у звичайному режимі (тобто не в тихому режимі). Те саме, що й 'Час друку (звичайний режим)'(normal_print_time)." msgid "Print time (silent mode)" msgstr "Час друку (тихий режим)" msgid "Estimated print time when printed in silent mode." msgstr "Розрахунковий час друку в тихому режимі." # AI Translated msgid "Total cost of all material used in the print. Calculated from filament_cost value in Filament Settings." msgstr "Загальна вартість усього матеріалу, використаного у друці. Обчислюється зі значення filament_cost у налаштуваннях філаменту." msgid "Total wipe tower cost" msgstr "Загальна вартість 'Вежі Очищення'" # AI Translated msgid "Total cost of the material wasted on the wipe tower. Calculated from filament_cost value in Filament Settings." msgstr "Загальна вартість матеріалу, витраченого на вежу протирання. Обчислюється зі значення filament_cost у налаштуваннях філаменту." msgid "Wipe tower volume" msgstr "Обʼєм 'Вежі Очищення'" msgid "Total filament volume extruded on the wipe tower." msgstr "Загальний обʼєм матеріалу видавленого в 'Вежу Очищення'." msgid "Used filament" msgstr "Філамент, що використовується" msgid "Total length of filament used in the print." msgstr "Загальна довжина філаменту, використаної під час друку." msgid "Print time (seconds)" msgstr "Час друку (в секундах)" # AI Translated msgid "Total estimated print time in seconds. Replaced with actual value during post-processing." msgstr "Загальний орієнтовний час друку в секундах. Замінюється фактичним значенням під час постобробки." msgid "Filament length (meters)" msgstr "Довжина філаменту (в метрах)" # AI Translated msgid "Total filament length used in meters. Replaced with actual value during post-processing." msgstr "Загальна довжина використаного філаменту в метрах. Замінюється фактичним значенням під час постобробки." msgid "Number of objects" msgstr "Кількість обʼєктів" msgid "Total number of objects in the print." msgstr "Загальна кількість об’єктів у друці." msgid "Number of instances" msgstr "Кількість екземплярів" msgid "Total number of object instances in the print, summed over all objects." msgstr "Загальна кількість екземплярів об’єктів у друці, підсумована за всіма об’єктами." msgid "Scale per object" msgstr "Масштаб на обʼєкт" msgid "" "Contains a string with the information about what scaling was applied to the individual objects. Indexing of the objects is zero-based (first object has index 0).\n" "Example: 'x:100% y:50% z:100%'." msgstr "" "Містить рядок з інформацією про те, який масштаб було застосовано до окремих об'єктів. Базова індексація обʼєктів нульова (перший обʼєкт має індекс 0).\n" "Приклад: 'x:100% y:50% z:100%'." msgid "Input filename without extension" msgstr "Введіть назву файлу без розширення" msgid "Source filename of the first object, without extension." msgstr "Назва вихідного файлу першого обʼєкта не має розширення." msgid "The vector has two elements: X and Y coordinate of the point. Values in mm." msgstr "Вектор має два елементи: X і Y координати точки. Значення в мм." msgid "The vector has two elements: X and Y dimension of the bounding box. Values in mm." msgstr "Вектор має два елементи: розміри X і Y обмежувальної рамки. Значення в мм." msgid "First layer convex hull" msgstr "Перший шар опуклої оболонки" msgid "Vector of points of the first layer convex hull. Each element has the following format:'[x, y]' (x and y are floating-point numbers in mm)." msgstr "Вектор точок опуклої оболонки першого шару. Кожен елемент має такий формат: '[x, y]' (x і y — числа з плаваючою комою в мм)." msgid "Bottom-left corner of the first layer bounding box" msgstr "Нижній лівий кут обмежувальної рамки першого шару" msgid "Top-right corner of the first layer bounding box" msgstr "Верхній правий кут обмежувальної рамки першого шару" msgid "Size of the first layer bounding box" msgstr "Розмір обмежувальної рамки першого шару" msgid "Bottom-left corner of print bed bounding box" msgstr "Нижній лівий кут обмежувальної рамки для друку" msgid "Top-right corner of print bed bounding box" msgstr "Верхній правий кут обмежувальної рамки для друку" msgid "Size of the print bed bounding box" msgstr "Розмір обмежувальної рамки для друку" msgid "Timestamp" msgstr "Мітка часу" msgid "String containing current time in yyyyMMdd-hhmmss format." msgstr "Рядок, що містить поточний час у форматі ррррММДД-ГГММСС." msgid "Day" msgstr "День" msgid "Hour" msgstr "Година" msgid "Minute" msgstr "Минута" msgid "Second" msgstr "Секунд" msgid "Print preset name" msgstr "Друк назви попередньо налаштованої" msgid "Name of the print preset used for slicing." msgstr "Назва стилю друку, яка використовується для нарізки." msgid "Filament preset name" msgstr "Назва профілю філаменту" msgid "Names of the filament presets used for slicing. The variable is a vector containing one name for each extruder." msgstr "Назви попередньо налаштованої нитки, яка використовується для нарізки. Змінна — це вектор, що містить одне ім’я для кожного екструдера." msgid "Printer preset name" msgstr "Назва попередньо налаштованого принтера" msgid "Name of the printer preset used for slicing." msgstr "Назва попередньо налаштованого принтера, що використовується для нарізки." msgid "Physical printer name" msgstr "Назва фізичного принтера" msgid "Name of the physical printer used for slicing." msgstr "Назва фізичного принтера, який використовується для нарізки." msgid "Layer number" msgstr "Номер шару" msgid "Index of the current layer. One-based (i.e. first layer is number 1)." msgstr "Індекс поточного шару. На одній основі (тобто перший шар номер 1)." msgid "Layer Z" msgstr "Шар Z" msgid "Height of the current layer above the print bed, measured to the top of the layer." msgstr "Висота поточного шару над поверхнею стола, виміряна до верхньої частини шару." msgid "Maximal layer Z" msgstr "Максимальний шар Z" msgid "Height of the last layer above the print bed." msgstr "Висота останнього шару над друкарським столом." msgid "Filament extruder ID" msgstr "ID номер екструдера філаменту" msgid "The current extruder ID. The same as current_extruder." msgstr "Поточний ідентифікатор екструдера. Те саме, що й current_extruder." msgid "Error in zip archive" msgstr "Помилка у zip архіві" msgid "Generating walls" msgstr "Створення периметрів" msgid "Generating infill regions" msgstr "Створення областей заповнення" msgid "Generating infill toolpath" msgstr "Створення траєкторії заповнення" msgid "Detect overhangs for auto-lift" msgstr "Виявлення виступів для автоматичного підйому" msgid "Checking support necessity" msgstr "Перевірка необхідності підтримки" msgid "floating regions" msgstr "області, що плавають" msgid "floating cantilever" msgstr "плаваюча консоль" msgid "large overhangs" msgstr "великі звіси" #, c-format, boost-format msgid "It seems object %s has %s. Please re-orient the object or enable support generation." msgstr "Схоже, обʼєкт %s має %s. Змініть орієнтацію обʼєкта або увімкніть Створення підтримки." msgid "Generating support" msgstr "Генерація підтримки" msgid "Optimizing toolpath" msgstr "Оптимізація траєкторії інструменту" msgid "Slicing mesh" msgstr "Нарізка сітки" msgid "No layers were detected. You might want to repair your STL file(s) or check their size or thickness and retry.\n" msgstr "Шари не виявлені. Можливо, потрібно відновити файли STL або перевірити їх розмір або товщину і повторити спробу.\n" msgid "" "An object's XY size compensation will not be used because it is also color-painted.\n" "XY Size compensation cannot be combined with color-painting." msgstr "" "Компенсація розміру XY обʼєкта не буде використовуватись, оскільки він також забарвлений кольором.\n" "Компенсація розміру XY не може поєднуватися з кольором." msgid "" "An object has enabled XY Size compensation which will not be used because it is also fuzzy skin painted.\n" "XY Size compensation cannot be combined with fuzzy skin painting." msgstr "" "Увімкнено компенсацію розмірів за XY, яка не може працювати одночасно з текстурною оболонкою. \n" "Тому компенсація розмірів за XY не буде використана." msgid "Object name" msgstr "Назва обʼєкту" msgid "Support: generate contact points" msgstr "Підтримка: створення точок контакту" msgid "Loading of a model file failed." msgstr "Не вдалося завантажити файл моделі." # AI Translated msgid "Meshing of a model file failed or no valid shape." msgstr "Не вдалося побудувати сітку файлу моделі, або відсутня коректна форма." msgid "The supplied file couldn't be read because it's empty." msgstr "Наданий файл не вдалося прочитати, оскільки він порожній" # AI Translated msgid "The file format is incompatible and cannot be parsed." msgstr "Формат файлу несумісний, і його не вдається прочитати." msgid "Unknown file format: input file must have .stl, .obj, or .amf(.xml) extension." msgstr "Невідомий формат файлу: вхідний файл повинен мати розширення .stl, .obj або .amf (.xml)." msgid "Unknown file format: input file must have .3mf or .zip.amf extension." msgstr "Невідомий формат файлу: вхідний файл повинен мати розширення .3mf або .zip.amf." msgid "load_obj: failed to parse" msgstr "помилка завантаження файлу OBJ: не вдалося розпізнати формат" msgid "load mtl in obj: failed to parse" msgstr "не вдалося розпізнати mtl у файлі obj: помилка парсингу" msgid "The file contains polygons with more than 4 vertices." msgstr "Цей файл містить полігони з більше ніж 4 вершинами." msgid "The file contains polygons with less than 2 vertices." msgstr "У файлі містяться полігони з менш ніж 2 вершинами." msgid "The file contains invalid vertex index." msgstr "У файлі містяться недійсний індекс вершини." msgid "This OBJ file couldn't be read because it's empty." msgstr "Цей файл формату OBJ не може бути прочитаний через те, що він порожній." msgid "Max Volumetric Speed Calibration" msgstr "Максимальна калібрування об’ємної швидкості" msgid "Manage Result" msgstr "Керування результатом" msgid "Manual Calibration" msgstr "Ручне калібрування" msgid "Result can be read by human eyes." msgstr "Результат може бути прочитаний людським оком." msgid "Auto-Calibration" msgstr "Автокалібрування" msgid "We would use Lidar to read the calibration result" msgstr "Ми використовуватимемо Лідар для зчитування результату калібрування" msgid "Prev" msgstr "Попередній" msgid "Recalibration" msgstr "Перекалібрування" msgid "Calibrate" msgstr "Калібрувати" msgid "Finish" msgstr "Завершити" msgid "How can I use calibration results?" msgstr "Як використовувати результат калібрування?" msgid "You could change the Flow Dynamics Calibration Factor in material editing" msgstr "Ви можете змінити Фактор калібрування динаміки потоку в редагуванні матеріалу" msgid "" "The current firmware version of the printer does not support calibration.\n" "Please upgrade the printer firmware." msgstr "" "Поточна версія вбудованого програмного забезпечення принтера не \n" "підтримує калібрування. Будь ласка, оновіть вбудоване програмне \n" "забезпечення принтера." msgid "Calibration not supported" msgstr "Калібрування не підтримується" msgid "Flow Dynamics" msgstr "Динаміка потоку" msgid "Max Volumetric Speed" msgstr "Максимальна об’ємна швидкість" #, c-format, boost-format msgid "" "Please input valid values:\n" "Start value: >= %.1f\n" "End value: <= %.1f\n" "End value: > Start value\n" "Value step: >= %.3f" msgstr "" "Будь ласка, введіть дійсні значення:\n" "Початкове значення: >= %.1f\n" "Кінцеве значення: <= %.1f\n" "Кінцеве значення: > Початкового значення\n" "Крок значення: >= %.3f)" msgid "The name cannot be empty." msgstr "Ім’я не може бути порожнім." #, c-format, boost-format msgid "The selected preset: %s was not found." msgstr "Обраний пресет: %s не знайдено." msgid "The name cannot be the same as the system preset name." msgstr "Назва не може бути такою самою, як системна назва." msgid "The name is the same as another existing preset name" msgstr "Назва така сама, як інша існуюча назва пресету" msgid "create new preset failed." msgstr "не вдалося створити новий передвстановлений параметр." #, c-format, boost-format msgid "Could not find parameter: %s." msgstr "Не можливо знайти параметр: %s." msgid "Are you sure to cancel the current calibration and return to the home page?" msgstr "Ви впевнені, що хочете скасувати поточну калібрування і повернутися на домашню сторінку?" msgid "No Printer Connected!" msgstr "Принтер не підключений!" msgid "Printer is not connected yet." msgstr "Принтер ще не підключено." msgid "Please select filament to calibrate." msgstr "Будь ласка, виберіть філамент для калібрування." msgid "The input value size must be 3." msgstr "Розмір введеного значення повинен бути 3." msgid "" "This machine type can only hold 16 historical results per nozzle. You can delete the existing historical results and then start calibration. Or you can continue the calibration, but you cannot create new calibration historical results.\n" "Do you still want to continue the calibration?" msgstr "" "Цей тип машини може зберігати лише 16 результатів історії на сопло. Ви можете видалити існуючі історичні результати та потім розпочати калібрування. Або ви можете продовжити калібрування, але ви не зможете створювати нові історичні результати калібрування.\n" "Ви все ще хочете продовжити калібрування?" # AI Translated #, c-format, boost-format msgid "Only one of the results with the same name: %s will be saved. Are you sure you want to override the other results?" msgstr "Буде збережено лише один із результатів з однаковою назвою: %s. Ви впевнені, що хочете перезаписати інші результати?" #, c-format, boost-format msgid "There is already a previous calibration result with the same name: %s. Only one result with a name is saved. Are you sure you want to overwrite the previous result?" msgstr "Вже існує історичний результат калібрування з такою самою назвою: %s. Зберігається лише один з результатів з такою самою назвою. Ви впевнені, що хочете перезаписати історичний результат?" # AI Translated #, c-format, boost-format msgid "" "Within the same extruder, the name(%s) must be unique when the filament type, nozzle diameter, and nozzle flow are the same.\n" "Are you sure you want to override the historical result?" msgstr "" "У межах одного екструдера назва(%s) має бути унікальною, коли тип філаменту, діаметр сопла та потік сопла однакові.\n" "Ви впевнені, що хочете перезаписати попередній результат?" #, c-format, boost-format msgid "This machine type can only hold %d historical results per nozzle. This result will not be saved." msgstr "Цей тип машини може зберігати лише %d результатів історії на сопло. Цей результат не буде збережений." msgid "Connecting to printer..." msgstr "Підключення до принтера…" msgid "The failed test result has been dropped." msgstr "Неуспішний результат тесту було відхилено." msgid "Flow Dynamics Calibration result has been saved to the printer." msgstr "Результат калібрування динаміки потоку було збережено в принтері" msgid "Internal Error" msgstr "Внутрішня помилка" msgid "Please select at least one filament for calibration" msgstr "Будь ласка, виберіть принаймні один матеріал для калібрування" msgid "Flow rate calibration result has been saved to preset." msgstr "Результат калібрування потоку було збережено до профілю" msgid "Max volumetric speed calibration result has been saved to preset." msgstr "Результат калібрування максимальної об’ємної швидкості було збережено в пресет" msgid "When do you need Flow Dynamics Calibration" msgstr "Коли потрібна калібрування динаміки потоку" # AI Translated msgid "" "We now have added the auto-calibration for different filaments, which is fully automated and the result will be saved into the printer for future use. You only need to do the calibration in the following limited cases:\n" "1. If you introduce a new filament of different brands/models or the filament is damp;\n" "2. If the nozzle is worn out or replaced with a new one;\n" "3. If the max volumetric speed or print temperature is changed in the filament setting." msgstr "" "Тепер ми додали автоматичне калібрування для різних філаментів; воно повністю автоматичне, а результат зберігається в принтері для подальшого використання. Калібрування потрібно виконувати лише в таких обмежених випадках:\n" "1. Якщо ви використовуєте новий філамент іншого бренду/моделі або філамент вологий;\n" "2. Якщо сопло зношене або замінене на нове;\n" "3. Якщо в налаштуваннях філаменту змінено максимальну обʼємну швидкість або температуру друку." msgid "About this calibration" msgstr "Про це калібрування" msgid "" "Please find the details of Flow Dynamics Calibration from our wiki.\n" "\n" "Usually the calibration is unnecessary. When you start a single color/material print, with the \"flow dynamics calibration\" option checked in the print start menu, the printer will follow the old way, calibrate the filament before the print; When you start a multi color/material print, the printer will use the default compensation parameter for the filament during every filament switch which will have a good result in most cases.\n" "\n" "Please note that there are a few cases that can make the calibration results unreliable, such as insufficient adhesion on the build plate. Improving adhesion can be achieved by washing the build plate or applying glue. For more information on this topic, please refer to our Wiki.\n" "\n" "The calibration results have about 10 percent jitter in our test, which may cause the result not exactly the same in each calibration. We are still investigating the root cause to do improvements with new updates." msgstr "" "Будь ласка, знайдіть деталі калібрування динаміки потоку на нашій Вікі.\n" "\n" "Зазвичай калібрування не є необхідним. Коли ви починаєте друк одним кольором/матеріалом з увімкненою опцією “калібрування динаміки потоку” в меню початку друку, принтер буде слідувати старому способу, калібруючи філамент перед друком. Коли ви починаєте друк багатокольоровим/матеріалом, принтер використовуватиме параметри компенсації за замовчуванням для філамента під час кожної зміни філамента, що зазвичай дає добрий результат.\n" "\n" "Зверніть увагу, що є кілька випадків, які можуть зробити результати калібрування ненадійними, такі як недостатня адгезія на робочій поверхні. Поліпшити адгезію можна, вимивши робочу поверхню або наносячи клей. Для отримання додаткової інформації з цього питання зверніться до нашої Вікі.\n" "\n" "Результати калібрування мають приблизно 10% нестабільності в наших тестах, що може призвести до того, що результати не будуть точно такими ж під час кожного калібрування. Ми все ще досліджуємо корінні причини, щоб внести поліпшення в нових оновленнях." msgid "When to use Flow Rate Calibration" msgstr "Коли використовувати Калібрування потоку" msgid "" "After using Flow Dynamics Calibration, there might still be some extrusion issues, such as:\n" "1. Over-Extrusion: Excess material on your printed object, forming blobs or zits, or the layers seem thicker than expected and not uniform\n" "2. Under-Extrusion: Very thin layers, weak infill strength, or gaps in the top layer of the model, even when printing slowly\n" "3. Poor Surface Quality: The surface of your prints seems rough or uneven\n" "4. Weak Structural Integrity: Prints break easily or don't seem as sturdy as they should be" msgstr "" "Після використання калібрування Flow Dynamics можуть все ще виникати деякі проблеми з екструзією, такі як:\n" "\n" "Перекістювання: Зайвий матеріал на надрукованому об’єкті, утворення комочків або прищепок, або шари виглядають товщими, ніж очікувалося, і неоднорідними.\n" "Недостача матеріалу: Дуже тонкі шари, слабка міцність заповнення або прогалини в верхньому шарі моделі, навіть при повільному друку.\n" "Погана якість поверхні: Поверхня ваших друків виглядає шершавою або нерівною.\n" "Слабка міцність конструкції: Друки ламаються легко або не виглядають настільки міцними, як повинні бути." msgid "In addition, Flow Rate Calibration is crucial for foaming materials like LW-PLA used in RC planes. These materials expand greatly when heated, and calibration provides a useful reference flow rate." msgstr "Крім того, калібрування рівня потоку є надзвичайно важливим для матеріалів, як наприклад LW-PLA, які утворюють піну і використовуються в моделях літаків для радіокерованої авіації. Ці матеріали значно розширюються при нагріванні, і калібрування надає корисну посилання на рівень потоку." msgid "Flow Rate Calibration measures the ratio of expected to actual extrusion volumes. The default setting works well in Bambu Lab printers and official filaments as they were pre-calibrated and fine-tuned. For a regular filament, you usually won't need to perform a Flow Rate Calibration unless you still see the listed defects after you have done other calibrations. For more details, please check out the wiki article." msgstr "Калібрування потоку вимірює співвідношення очікуваного та фактичного об'єму екструзії. Налаштування за замовчуванням добре працює на принтерах Bambu Lab з офіційними філаментами, оскільки вони вже попередньо відкалібровані та точно налаштовані. Для звичайного філаменту калібрування потоку зазвичай не потрібне, окрім випадків коли після виконання інших калібрувань все ще залишаються перераховані дефекти. Детальніше ви можете ознайомитися в статті на вікі." msgid "" "Auto Flow Rate Calibration utilizes Bambu Lab's Micro-Lidar technology, directly measuring the calibration patterns. However, please be advised that the efficacy and accuracy of this method may be compromised with specific types of materials. Particularly, filaments that are transparent or semi-transparent, have sparkles, or have a highly-reflective finish may not be suitable for this calibration and can produce less-than-desirable results.\n" "\n" "The calibration results may vary between each calibration or filament. We are still improving the accuracy and compatibility of this calibration through firmware updates over time.\n" "\n" "Caution: Flow Rate Calibration is an advanced process, to be attempted only by those who fully understand its purpose and implications. Incorrect usage can lead to sub-par prints or printer damage. Please make sure to carefully read and understand the process before doing it." msgstr "" "Автоматичне калібрування потоку використовує технологію Micro-Lidar від Bambu Lab і безпосередньо вимірює зразки калібрування. Однак зверніть увагу, що ефективність і точність цього методу можуть бути ненадійними для певних типів матеріалу. Зокрема прозорі чи напівпрозорі філаменти, філаменти що мають блискучі частинки або високий ступінь відбиття, можуть бути несумісні з цим калібруванням і давати результати, які не відповідають дійсності.\n" "\n" "Результати калібрування можуть варіюватися між кожним калібруванням або філаментом. Ми постійно вдосконалюємо точність і сумісність цього калібрування завдяки оновленням в програмному забезпеченні.\n" "\n" "Увага: Калібрування потоку - це складний процес, який слід спробувати лише тим, хто повністю розуміє його призначення і наслідки. Неправильне налаштування може призвести до неякісного друку або пошкодження принтера. Будь ласка, перед тим як виконувати калібрування, докладно ознайомтеся та розберіться у процесі." msgid "When you need Max Volumetric Speed Calibration" msgstr "Коли вам потрібна калібрування максимальної обʼємної швидкості" msgid "Over-extrusion or under extrusion" msgstr "Перевитрати або недостатній видавання" msgid "Max Volumetric Speed calibration is recommended when you print with:" msgstr "Калібрування максимальної обʼємної швидкості рекомендується при друку з такими матеріалами:" msgid "material with significant thermal shrinkage/expansion, such as..." msgstr "матеріалами зі значним термічним звуженням/розширенням, такими як..." msgid "materials with inaccurate filament diameter" msgstr "матеріалами з неточним діаметром філаменту" msgid "We found the best Flow Dynamics Calibration Factor" msgstr "Ми знайшли найкращий коефіцієнт калібрування динаміки потоку" msgid "Part of the calibration failed! You may clean the plate and retry. The failed test result would be dropped." msgstr "Частина калібрування не вдалася! Ви можете очистити плиту і повторити спробу. Невдалі результати тесту будуть видалені." msgid "*We recommend you to add brand, materia, type, and even humidity level in the Name" msgstr "*Ми рекомендуємо вам додати бренд, матеріал, тип і навіть рівень вологості у назву" msgid "Please enter the name you want to save to printer." msgstr "Будь ласка, введіть назву, яку ви хочете зберегти на принтері." msgid "The name cannot exceed 40 characters." msgstr "Назва не може бути довшою за 40 знаків." msgid "Nozzle ID" msgstr "ІД сопла" msgid "Standard Flow" msgstr "Стандартний потік" msgid "Please find the best line on your plate" msgstr "Будь ласка, знайдіть найкращу лінію на вашій пластині" msgid "Please find the corner with the perfect degree of extrusion" msgstr "Будь ласка, знайдіть кут з ідеальним ступенем витіснення" msgid "Input Value" msgstr "Введіть значення" msgid "Save to Filament Preset" msgstr "Зберегти в Профіль Філаменту" msgid "Record Factor" msgstr "Фактор запису" msgid "We found the best flow ratio for you" msgstr "Ми знайшли найкраще співвідношення коефіцієнту потоку для вас" msgid "Flow Ratio" msgstr "Коефіцієнт потоку" msgid "Please input a valid value (0.0 < flow ratio < 2.0)" msgstr "Будь ласка, введіть дійсне значення (0.0 < коефіцієнт потоку < 2.0)" msgid "Please enter the name of the preset you want to save." msgstr "Будь ласка, введіть назву шаблону, який ви хочете зберегти." msgid "Calibration1" msgstr "Калібрування1" msgid "Calibration2" msgstr "Калібрування2" msgid "Please find the best object on your plate" msgstr "Будь ласка, знайдіть найкращий обʼєкт на вашій пластині" msgid "Fill in the value above the block with smoothest top surface" msgstr "Заповніть значення над блоком з найгладшою верхньою поверхнею" msgid "Skip Calibration2" msgstr "Пропустити калібрування2" #, c-format, boost-format msgid "flow ratio : %s " msgstr "коєфіцієнт потоку : %s " msgid "Please choose a block with smoothest top surface." msgstr "Будь ласка, виберіть блок з найгладшою верхньою поверхнею." msgid "Please input a valid value (0 <= Max Volumetric Speed <= 60)" msgstr "Будь ласка, введіть дійсне значення (0 <= Максимальна обʼємна швидкість <= 60)" msgid "Calibration Type" msgstr "Тип калібрування" msgid "Complete Calibration" msgstr "Повне калібрування" msgid "Fine Calibration based on flow ratio" msgstr "Точне калібрування на основі коефіцієнту потоку" msgid "Title" msgstr "Назва" msgid "A test model will be printed. Please clear the build plate and place it back to the hot bed before calibration." msgstr "Буде надруковано тестову модель. Будь ласка, очистіть робочу пластину та поверніть його на гарячий стіл перед калібруванням." msgid "Printing Parameters" msgstr "Параметри друку" msgid "- ℃" msgstr "- ℃" msgid "Synchronize nozzle and AMS information" msgstr "Синхронізувати інформацію про сопло та AMS" msgid "Please connect the printer first before synchronizing." msgstr "Будь ласка, підʼєднайтеся до принтера перед синхронізацією." # AI Translated #, c-format, boost-format msgid "Printer %s nozzle information has not been set. Please configure it before proceeding with the calibration." msgstr "Інформацію про сопло принтера %s не задано. Налаштуйте її, перш ніж продовжувати калібрування." msgid "AMS and nozzle information are synced" msgstr "Інформацію про сопло і AMS синхронізовано" msgid "Nozzle Flow" msgstr "Потік сопла" msgid "Filament position" msgstr "Розташування філаменту" msgid "Filament For Calibration" msgstr "Філамент для калібрування" msgid "" "Tips for calibration material:\n" "- Materials that can share same hot bed temperature\n" "- Different filament brand and family (Brand = Bambu, Family = Basic, Matte)" msgstr "" "Поради щодо матеріалу для калібрування: \n" "- Матеріали, які можуть використовувати однакову температуру гарячого ліжка\n" "- Різні бренди та сімейства ниток (Бренд = Bambu, Сімейство = Basic, Matte)" msgid "Pattern" msgstr "Зразок" msgid "Method" msgstr "Метод" #, c-format, boost-format msgid "%s is not compatible with %s" msgstr "%s несумісний з %s" msgid "TPU is not supported for Flow Dynamics Auto-Calibration." msgstr "TPU не підтримується для автокалібрування Flow Dynamics." # AI Translated msgid "Selected nozzle temperatures are incompatible. For multi-material printing, each filament's nozzle temperature must be within the recommended nozzle temperature range of the other filaments. Otherwise, nozzle clogging or printer damage may occur." msgstr "Вибрані температури сопла несумісні. Для багатоматеріального друку температура сопла кожного філаменту має входити в рекомендований діапазон температур сопла інших філаментів. Інакше можливе засмічення сопла або пошкодження принтера." # AI Translated msgid "Sync AMS and nozzle information" msgstr "Синхронізувати інформацію про AMS та сопло" # AI Translated msgid "Calibration only supports cases where the left and right nozzle diameters are identical." msgstr "Калібрування підтримується лише у випадках, коли діаметри лівого та правого сопел однакові." msgid "From k Value" msgstr "Зі значення k" msgid "To k Value" msgstr "Для значення k" msgid "Step value" msgstr "Величина кроку" msgid "The nozzle diameter has been synchronized from the printer Settings" msgstr "Діаметр сопла було синхронізовано з налаштувань принтера" msgid "From Volumetric Speed" msgstr "З обʼємною швидкістю" msgid "To Volumetric Speed" msgstr "До обʼємної швидкості" msgid "Are you sure you want to cancel this print?" msgstr "Ви впевнені, що хочете скасувати цей друк?" msgid "Flow Dynamics Calibration Result" msgstr "Результат калібрування динаміки потоку" msgid "New" msgstr "Новий" msgid "No History Result" msgstr "Немає історії результатів" msgid "Success to get history result" msgstr "Успішно отримано історичний результат" msgid "Refreshing the previous Flow Dynamics Calibration records" msgstr "Оновлення історичних записів калібрування динаміки потоку" #, c-format, boost-format msgid "Note: The hotend number on the %s is tied to the holder. When the hotend is moved to a new holder, its number will update automatically." msgstr "Примітка: Номер хотенда на %s прив’язаний до тримача. Коли хотенд переміщується до нового власника, його номер оновлюється автоматично." msgid "Action" msgstr "Дія" #, c-format, boost-format msgid "This machine type can only hold %d historical results per nozzle." msgstr "Цей тип машини може зберігати лише %d результатів історії на сопло." msgid "Edit Flow Dynamics Calibration" msgstr "Змінити калібрування динаміки потоку" # AI Translated #, c-format, boost-format msgid "Within the same extruder, the name '%s' must be unique when the filament type, nozzle diameter, and nozzle flow are identical. Please choose a different name." msgstr "У межах одного екструдера назва '%s' має бути унікальною, коли тип філаменту, діаметр сопла та потік сопла однакові. Виберіть іншу назву." msgid "New Flow Dynamic Calibration" msgstr "Нове калібрування динамічного потоку" msgid "The filament must be selected." msgstr "Філамент повинен бути обраний." # AI Translated msgid "The extruder must be selected." msgstr "Потрібно вибрати екструдер." # AI Translated msgid "The nozzle must be selected." msgstr "Потрібно вибрати сопло." msgid "Network lookup" msgstr "Мережевий пошук" msgid "Address" msgstr "Адреса" msgid "Hostname" msgstr "Назва хоста" msgid "Service name" msgstr "Назва служби" msgid "OctoPrint version" msgstr "Версія OctoPrint" msgid "Searching for devices" msgstr "Пошук пристроїв" msgid "Finished" msgstr "Завершено" msgid "Multiple resolved IP addresses" msgstr "Кілька дозволених IP-адрес" #, boost-format msgid "" "There are several IP addresses resolving to hostname %1%.\n" "Please select one that should be used." msgstr "" "Є кілька IP-адрес, які перетворюються на ім’я хоста %1%.\n" "Будь ласка, виберіть той, який слід використовувати." # AI Translated msgid "Auto-scale for nozzle" msgstr "Автомасштабування під сопло" # AI Translated msgid "" "This model is designed around a 0.4 mm nozzle with a 0.2 mm layer height. \n" "When the scaling option is enabled (recommended), it dynamically resizes to match your current nozzle diameter and an appropriate layer height, making the test both accurate and easy to read.\n" "Turn scaling off only if you wish to print the reference model exactly as-is." msgstr "" "Ця модель розрахована на сопло 0,4 мм і висоту шару 0,2 мм. \n" "Коли увімкнено масштабування (рекомендовано), розмір моделі динамічно підлаштовується під діаметр вашого поточного сопла та відповідну висоту шару, завдяки чому тест є точним і легко читається.\n" "Вимикайте масштабування, лише якщо хочете надрукувати еталонну модель точно в первісному вигляді." msgid "PA Calibration" msgstr "Калібрування ВТ (РА)" msgid "Extruder type" msgstr "Тип екструдера" msgid "DDE" msgstr "Директ" msgid "PA Tower" msgstr "РА Вежа" msgid "PA Line" msgstr "РА лінія" msgid "PA Pattern" msgstr "PA Патерн" msgid "Start PA: " msgstr "Початкове ВТ (PA): " msgid "End PA: " msgstr "Кінцеве ВТ (РА): " msgid "PA step: " msgstr "Крок ВТ (PA): " # AI Translated msgid "Accelerations: " msgstr "Прискорення: " # AI Translated msgid "Speeds: " msgstr "Швидкості: " msgid "Print numbers" msgstr "Друк значень" # AI Translated msgid "Comma-separated list of printing accelerations" msgstr "Список прискорень друку через кому" # AI Translated msgid "Comma-separated list of printing speeds" msgstr "Список швидкостей друку через кому" msgid "" "Please input valid values:\n" "Start PA: >= 0.0\n" "End PA: > Start PA\n" "PA step: >= 0.001" msgstr "" "Введіть допустимі значення:\n" "Початковий PA: >= 0,0\n" "Кінцевий PA: > Початок PA\n" "Крок PA: >= 0,001)" # AI Translated msgid "" "Acceleration values must be greater than speed values.\n" "Please verify the inputs." msgstr "" "Значення прискорення мають бути більшими за значення швидкості.\n" "Перевірте введені дані." msgid "Temperature calibration" msgstr "Калібрування температури" msgid "Filament type" msgstr "Тип філаменту" msgid "PLA" msgstr "PLA" msgid "ABS/ASA" msgstr "ABS/ASA" msgid "PETG" msgstr "PETG" msgid "PCTG" msgstr "PCTG" msgid "TPU" msgstr "TPU" msgid "PA-CF" msgstr "PA-CF" msgid "PET-CF" msgstr "PET-CF" msgid "Start temp: " msgstr "Початкова температура: " msgid "End temp: " msgstr "Кінцева температура: " msgid "Temp step: " msgstr "Крок температури: " msgid "" "Please input valid values:\n" "Start temp: <= 500\n" "End temp: >= 155\n" "Start temp >= End temp + 5" msgstr "" "Будь ласка, введіть правильні значення:\n" "Початкова температура: <= 500\n" "Кінцева температура: >= 155\n" "Початкова температура >= Кінцева температура + 5" msgid "Max volumetric speed test" msgstr "Тест максимальної обʼємної швидкості" msgid "Start volumetric speed: " msgstr "Початкова обʼємна швидкість: " msgid "End volumetric speed: " msgstr "Кінцева обʼємна швидкість: " msgid "" "Please input valid values:\n" "start > 0\n" "step >= 0\n" "end > start + step" msgstr "" "Будь ласка, введіть дійсні значення:\n" "початок > 0 \n" "крок >= 0\n" "кінець > початок + крок" msgid "VFA test" msgstr "ВДА (VFA) тест" msgid "Start speed: " msgstr "Початкова швидкість: " msgid "End speed: " msgstr "Кінцева швидкість: " # AI Translated msgid "Auto-adjust to max volumetric speed" msgstr "Автопідлаштування під максимальну обʼємну швидкість" # AI Translated msgid "If the end speed would exceed the filament's maximum volumetric speed, automatically lower the layer height (keeping standard values and staying within the machine's limits) to reach it. If even the minimum layer height is not enough, lower the end speed instead." msgstr "Якщо кінцева швидкість перевищить максимальну обʼємну швидкість філаменту, автоматично зменшувати висоту шару (зберігаючи стандартні значення та не виходячи за обмеження машини), щоб її досягти. Якщо навіть мінімальної висоти шару не досить, натомість буде знижено кінцеву швидкість." msgid "" "Please input valid values:\n" "start > 10\n" "step >= 0\n" "end > start + step" msgstr "" "Будь ласка, введіть коректні значення:\n" "початок > 10\n" "крок >= 0\n" "кінець > початок + крок)" # AI Translated #, c-format, boost-format msgid "" "The end speed (%.0f mm/s) exceeds the filament's maximum volumetric speed (%.1f mm³/s), which limits the outer wall to about %.0f mm/s at this line width and layer height.\n" " Speeds above this will be clamped, so the upper blocks of the tower will not print at the requested speed.\n" "\n" "%s" msgstr "" "Кінцева швидкість (%.0f мм/с) перевищує максимальну обʼємну швидкість філаменту (%.1f мм³/с), яка за такої ширини лінії та висоти шару обмежує зовнішню стінку приблизно до %.0f мм/с.\n" " Вищі швидкості будуть обмежені, тож верхні блоки вежі не надрукуються із заданою швидкістю.\n" "\n" "%s" # AI Translated #, c-format, boost-format msgid "" "The end speed (%.0f mm/s) exceeds the filament's maximum volumetric speed (%.1f mm³/s) at the default layer height (%.2f mm).\n" "\n" "The layer height has been reduced to %.2f mm (a value used by this printer's profiles) so the tower can reach the requested speed." msgstr "" "Кінцева швидкість (%.0f мм/с) перевищує максимальну обʼємну швидкість філаменту (%.1f мм³/с) за типової висоти шару (%.2f мм).\n" "\n" "Висоту шару зменшено до %.2f мм (значення, яке використовують профілі цього принтера), щоб вежа могла досягти заданої швидкості." # AI Translated #, c-format, boost-format msgid "" "Even at the smallest layer height used by this printer's profiles (%.2f mm) the end speed (%.0f mm/s) exceeds the filament's maximum volumetric speed (%.1f mm³/s).\n" "\n" "The layer height will be set to %.2f mm and the end speed lowered to %.0f mm/s.\n" "\n" "Continue?" msgstr "" "Навіть за найменшої висоти шару, яку використовують профілі цього принтера (%.2f мм), кінцева швидкість (%.0f мм/с) перевищує максимальну обʼємну швидкість філаменту (%.1f мм³/с).\n" "\n" "Висоту шару буде встановлено на %.2f мм, а кінцеву швидкість знижено до %.0f мм/с.\n" "\n" "Продовжити?" # AI Translated msgid "Continue anyway?" msgstr "Усе одно продовжити?" # AI Translated msgid "Enable \"Auto-adjust\" to fix this automatically, or continue anyway?" msgstr "Увімкнути «Автопідлаштування», щоб виправити це автоматично, чи все одно продовжити?" # AI Translated msgid "Enable \"Auto-scale for nozzle\" and \"Auto-adjust\" to fix this automatically, or continue anyway?" msgstr "Увімкнути «Автомасштабування під сопло» та «Автопідлаштування», щоб виправити це автоматично, чи все одно продовжити?" msgid "Start retraction length: " msgstr "Початкова довжина ретракту: " msgid "End retraction length: " msgstr "Кінцева довжина ретракту: " # AI Translated msgid "Input shaping Frequency test" msgstr "Тест частоти Input Shaping" msgid "Test model" msgstr "Тестова модель" # AI Translated msgid "Ringing Tower" msgstr "Вежа резонансу (Ringing Tower)" msgid "Fast Tower" msgstr "Швидка вежа" # AI Translated msgid "Please ensure the selected type is compatible with your firmware version." msgstr "Переконайтеся, що вибраний тип сумісний з вашою версією прошивки." # AI Translated msgid "" "Marlin version => 2.1.2\n" "Fixed-Time motion not yet implemented." msgstr "" "Версія Marlin => 2.1.2\n" "Рух Fixed-Time ще не реалізовано." msgid "Klipper version => 0.9.0" msgstr "Версія Klipper => 0.9.0" # AI Translated msgid "" "RepRap firmware version => 3.4.0\n" "Check your firmware documentation for supported shaper types." msgstr "" "Версія RepRap firmware => 3.4.0\n" "Перевірте в документації прошивки, які типи шейперів підтримуються." msgid "Frequency (Start / End): " msgstr "Частота (Початок / Кінець): " msgid "Start / End" msgstr "Початок / Кінець" msgid "Frequency settings" msgstr "Налаштування частоти" # AI Translated msgid "RepRap firmware uses the same frequency range for both axes." msgstr "RepRap firmware використовує однаковий діапазон частот для обох осей." # AI Translated msgid "Damp: " msgstr "Демпфування: " # AI Translated msgid "" "Recommended: Set Damp to 0.\n" "This will use the printer's default or saved value." msgstr "" "Рекомендовано: встановіть Демпфування на 0.\n" "Буде використано типове або збережене значення принтера." # AI Translated msgid "" "Please input valid values:\n" "(0 < FreqStart < FreqEnd < 500)" msgstr "" "Введіть коректні значення:\n" "(0 < FreqStart < FreqEnd < 500)" # AI Translated msgid "Please input a valid damping factor (0 < Damping/zeta factor <= 1)" msgstr "Введіть коректний коефіцієнт демпфування (0 < коефіцієнт демпфування/дзета <= 1)" # AI Translated msgid "Input shaping Damp test" msgstr "Тест демпфування Input Shaping" msgid "Check firmware compatibility." msgstr "Перевірити сумісність прошивки." msgid "Frequency: " msgstr "Частота: " # AI Translated msgid "Damp" msgstr "Демпфування" # AI Translated msgid "RepRap firmware uses the same frequency for both axes." msgstr "RepRap firmware використовує однакову частоту для обох осей." # AI Translated msgid "Note: Use previously calculated frequencies." msgstr "Примітка: використовуйте раніше обчислені частоти." # AI Translated msgid "" "Please input valid values:\n" "(0 < Freq < 500)" msgstr "" "Введіть коректні значення:\n" "(0 < Freq < 500)" # AI Translated msgid "Please input a valid damping factor (0 <= DampingStart < DampingEnd <= 1)" msgstr "Введіть коректний коефіцієнт демпфування (0 <= DampingStart < DampingEnd <= 1)" # AI Translated msgid "Cornering test" msgstr "Тест проходження кутів" msgid "SCV-V2" msgstr "SCV-V2" msgid "Start: " msgstr "Початок: " msgid "End: " msgstr "Кінець: " # AI Translated msgid "Cornering settings" msgstr "Налаштування проходження кутів" # AI Translated msgid "Note: Lower values = sharper corners but slower speeds." msgstr "Примітка: нижчі значення = гостріші кути, але нижчі швидкості." # AI Translated msgid "" "Marlin 2 Junction Deviation detected:\n" "To test Classic Jerk, set 'Maximum Junction Deviation' in Motion ability to 0." msgstr "" "Виявлено Junction Deviation у Marlin 2:\n" "Щоб протестувати класичний Jerk, встановіть 'Максимальне Junction Deviation' у розділі рухових можливостей на 0." # AI Translated msgid "" "Marlin 2 Classic Jerk detected:\n" "To test Junction Deviation, set 'Maximum Junction Deviation' in Motion ability to a value > 0." msgstr "" "Виявлено класичний Jerk у Marlin 2:\n" "Щоб протестувати Junction Deviation, встановіть 'Максимальне Junction Deviation' у розділі рухових можливостей на значення > 0." # AI Translated msgid "" "RepRap detected: Jerk in mm/s.\n" "OrcaSlicer will convert the values to mm/min when necessary." msgstr "" "Виявлено RepRap: Jerk у мм/с.\n" "OrcaSlicer за потреби конвертує значення в мм/хв." # AI Translated #, c-format, boost-format msgid "" "Please input valid values:\n" "(0 <= Cornering <= %s)" msgstr "" "Введіть коректні значення:\n" "(0 <= проходження кутів <= %s)" # AI Translated #, c-format, boost-format msgid "NOTE: High values may cause Layer shift (>%s)" msgstr "ПРИМІТКА: високі значення можуть спричинити зсув шарів (>%s)" # AI Translated msgid "Flow Ratio Calibration" msgstr "Калібрування коефіцієнта потоку" msgid "Calibration Test Type" msgstr "Тип тесту калібрування" msgid "Pass 1 (Coarse)" msgstr "Фаза 1 (Швидка)" msgid "Pass 2 (Fine)" msgstr "Фаза 2 (Хороша)" msgid "YOLO (Recommended)" msgstr "YOLO (Рекомендоване)" # AI Translated msgid "YOLO (Perfectionist)" msgstr "YOLO (Перфекціоніст)" msgid "Top Surface Pattern" msgstr "Шаблон верхньої поверхні" msgid "Choose a slot for the selected color" msgstr "Оберіть слот для вибраного кольору" # AI Translated msgid "Material in the material station" msgstr "Матеріал у станції матеріалів" msgid "Only materials of the same type can be selected." msgstr "Можна вибрати лише матеріали одного типу." msgid "Send G-code to printer host" msgstr "Надіслання G-коду на хост друку" msgid "Upload to Printer Host with the following filename:" msgstr "Завантажити на хост принтера з наступним іменем файлу:" msgid "Use forward slashes ( / ) as a directory separator if needed." msgstr "Використовуйте косі нахилу ( / ) як роздільник каталогів, якщо потрібно." msgid "Upload to storage" msgstr "Завантажити до сховища" msgid "Switch to Device tab after upload." msgstr "Перемкнутися на вкладку Пристрій після завантаження." #, c-format, boost-format msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?" msgstr "Назва файлу для завантаження не закінчується на \"%s\". Бажаєте продовжити?" msgid "Upload" msgstr "Відвантаження" msgid "Leveling before print" msgstr "Вирівнювання перед друком" msgid "Time-lapse" msgstr "Таймлапс" msgid "Enable IFS" msgstr "Дозволити IFS" # AI Translated #, c-format, boost-format msgid "Detected %d IFS slots on printer." msgstr "На принтері виявлено %d слотів IFS." # AI Translated msgid "This printer does not report a material station." msgstr "Цей принтер не повідомляє про станцію матеріалів." msgid "Unable to read IFS slots from printer." msgstr "Не можливо прочитати слоти IFS з принтера." msgid "Loading IFS slots from printer..." msgstr "Завантаження слотів IFS з принтера..." # AI Translated msgid "Slice the plate first to get project material information." msgstr "Спершу наріжте пластину, щоб отримати інформацію про матеріали проєкту." # AI Translated msgid "This plate uses multiple materials. Enable IFS and assign each tool to a printer slot." msgstr "Ця пластина використовує кілька матеріалів. Увімкніть IFS і призначте кожен інструмент слоту принтера." # AI Translated msgid "Each project material must be assigned to an IFS slot before printing." msgstr "Перед друком кожен матеріал проєкту має бути призначений слоту IFS." # AI Translated msgid "Each project material must be assigned to a loaded IFS slot before printing." msgstr "Перед друком кожен матеріал проєкту має бути призначений завантаженому слоту IFS." # AI Translated msgid "Each project material must match the material loaded in the selected IFS slot." msgstr "Кожен матеріал проєкту має відповідати матеріалу, завантаженому у вибраний слот IFS." msgid "Print host upload queue" msgstr "Черга завантаження на хост друку" msgid "ID" msgstr "Ідентифікатор" msgid "Progress" msgstr "Прогрес" msgid "Host" msgstr "Хост" msgctxt "OfFile" msgid "Size" msgstr "Розмір" msgid "Filename" msgstr "Назва файлу" msgid "Cancel selected" msgstr "Скасувати вибране" msgid "Show error message" msgstr "Показати повідомлення про помилку" msgid "Queued" msgstr "У черзі" msgid "Uploading" msgstr "Завантаження" msgid "Canceling" msgstr "Скасування" msgid "Error uploading to print host" msgstr "Помилка завантаження на хост друку" msgid "The selected bed type does not match the file. Please confirm before starting the print." msgstr "Тип столу не відповідає файлу. Будь ласка, підтвердьте перед початком друку." msgid "Heated Bed Leveling" msgstr "Вирівнювання Нагрівального Столу" msgid "Textured Build Plate (Side A)" msgstr "Текстурована Робоча Пластина (Cторона A)" msgid "Smooth Build Plate (Side B)" msgstr "Гладка Робоча Пластина (Cторона B)" #, c-format, boost-format msgid "Printer: %s" msgstr "Принтер: %s" msgid "Calibrate before printing" msgstr "Калібрувати перед друком" # AI Translated msgid "Filament Mapping:" msgstr "Зіставлення філаментів:" msgid "Unable to perform boolean operation on selected parts" msgstr "Не вдається виконати булеву операцію на вибраних частинах" msgid "Mesh Boolean" msgstr "Логічна сітка" msgid "Union" msgstr "Обʼєднання" msgid "Difference" msgstr "Різниця" msgid "Intersection" msgstr "Перетин" msgid "Source Volume" msgstr "Обʼєм джерела" msgid "Tool Volume" msgstr "Обʼєм інструмента" msgid "Subtract from" msgstr "Ціль" msgid "Subtract with" msgstr "Відʼємник" msgid "selected" msgstr "вибрані" msgid "Part 1" msgstr "Частина 1" msgid "Part 2" msgstr "Частина 2" msgid "Delete input" msgstr "Видалити початкові обʼєкти" msgid "Network Test" msgstr "Тест мережі" msgid "Start Test Multi-Thread" msgstr "Розпочати тестування багатопотоково" msgid "Start Test Single-Thread" msgstr "Розпочати тестування однопотоково" msgid "Export Log" msgstr "Експортувати журнал (лог)" msgid "OrcaSlicer Version:" msgstr "Версія OrcaSlicer:" msgid "System Version:" msgstr "Версія системи:" msgid "DNS Server:" msgstr "DNS-сервер:" msgid "Test OrcaSlicer (GitHub)" msgstr "Перевірте OrcaSlicer на (GitHub)" msgid "Test OrcaSlicer (GitHub):" msgstr "Перевірте OrcaSlicer (GitHub):" msgid "Test bing.com" msgstr "Tест bing.com" msgid "Test bing.com:" msgstr "Tест bing.com:" msgid "Log Info" msgstr "Інформація журналу" msgid "Select filament preset" msgstr "Вибрати пресет філаменту" msgid "Create Filament" msgstr "Створити Філамент" msgid "Create Based on Current Filament" msgstr "Створити на основі поточного філаменту" msgid "Copy Current Filament Preset " msgstr "Копіювати поточний набір параметрів філаменту " msgid "Basic Information" msgstr "Основна інформація" msgid "Add Filament Preset under this filament" msgstr "Додати пресет філаменту під цим філаментом" msgid "We could create the filament presets for your following printer:" msgstr "Ми можемо створити пресети філаменту для вашого наступного принтера:" msgid "Select Vendor" msgstr "Вибрати виробника" msgid "Input Custom Vendor" msgstr "Введіть власного виробника" msgid "Can't find vendor I want" msgstr "Не можу знайти виробника, якого я хочу" msgid "Select Type" msgstr "Виберіть Тип" msgid "Select Filament Preset" msgstr "Виберіть пресет філаменту" msgid "Serial" msgstr "Серійний номер" msgid "e.g. Basic, Matte, Silk, Marble" msgstr "наприклад, Basic, Matte, Silk, Marble" msgid "Filament Preset" msgstr "Набір параметрів філаменту" msgid "Create" msgstr "Створити" msgid "Vendor is not selected; please reselect vendor." msgstr "Виробник не вибраний. Будь ласка, перевиберіть виробника." msgid "Custom vendor missing; please input custom vendor." msgstr "Власного виробника не введено. Будь ласка, введіть інформацію про власного виробника." msgid "\"Bambu\" or \"Generic\" cannot be used as a Vendor for custom filaments." msgstr "“Bambu” або “Generic” не може бути використано як виробник для власних налаштувань філаменту." msgid "Filament type is not selected, please reselect type." msgstr "Тип філаменту не вибраний. Будь ласка, перевиберіть тип." msgid "Filament serial missing; please input serial." msgstr "Серійний номер філаменту не введено. Будь ласка, введіть серійний номер." msgid "There may be disallowed characters in the vendor or serial input of the filament. Please delete and re-enter." msgstr "Можливо, введено спеціальні символи у виробника або серійний номер філаменту. Будь ласка, видаліть їх і введіть ще раз." msgid "All inputs in the custom vendor or serial are spaces. Please re-enter." msgstr "Усі введені значення в полі власного виробника або серійного номера є пробіли. Будь ласка, введіть щось інше." msgid "The vendor cannot be a number; please re-enter." msgstr "Виробник не може бути числом. Будь ласка, введіть ще раз." msgid "You have not selected a printer or preset yet. Please select at least one." msgstr "Ви ще не вибрали принтер або пресет. Будь ласка, виберіть принаймні один з них." #, c-format, boost-format msgid "" "The Filament name %s you created already exists.\n" "If you continue, the preset created will be displayed with its full name. Do you want to continue?" msgstr "" "Назва філаменту %s, яку ви створили, вже існує.\n" "Якщо ви продовжите створення, новий набір параметрів буде відображений з повною назвою. Хочете продовжити?" msgid "Some existing presets have failed to be created, as follows:\n" msgstr "Деякі існуючі пресети не вдалося створити, як показано нижче:\n" msgid "" "\n" "Do you want to rewrite it?" msgstr "" "\n" "Чи бажаєте ви їх перезаписати?" msgid "" "We would rename the presets as \"Vendor Type Serial @printer you selected\".\n" "To add preset for more printers, please go to printer selection" msgstr "" "Ми б перейменували попередні налаштування на «Вибраний вами серійний @принтер постачальника».\n" "Щоб додати попередні налаштування для інших принтерів, перейдіть до вибору принтера" msgid "Create Printer/Nozzle" msgstr "Створити Принтер/Сопло" msgid "Create Printer" msgstr "Створити Принтер" msgid "Create Nozzle for Existing Printer" msgstr "Створити сопло для існуючого принтера" msgid "Create from Template" msgstr "Створити з шаблону" msgid "Create Based on Current Printer" msgstr "Створити на основі поточного принтера" msgid "Import Preset" msgstr "Імпорт набору параметрів" msgid "Create Type" msgstr "Тип" msgid "The model was not found; please reselect vendor." msgstr "Модель не знайдено. Будь ласка, перевиберіть виробника." msgid "Select Printer" msgstr "Виберіть принтер" msgid "Select Model" msgstr "Виберіть модель" msgid "Input Custom Model" msgstr "Введіть власну модель" msgid "Can't find my printer model" msgstr "Не можу знайти свою модель принтера" msgid "Input Custom Nozzle Diameter" msgstr "Введіть власний діаметр сопла" msgid "Can't find my nozzle diameter" msgstr "Не можливо знайти мій діаметр сопла" msgid "Printable Space" msgstr "Простір для друку" msgid "Hot Bed STL" msgstr "STL файл для гарячого столу" msgid "Hot Bed SVG" msgstr "SVG для гарячого ліжка" msgid "Max Print Height" msgstr "Максимальна висота друку" #, c-format, boost-format msgid "The file exceeds %d MB, please import again." msgstr "Файл перевищує %d МБ, будь ласка, імпортуйте знову." msgid "Exception in obtaining file size, please import again." msgstr "Виникла помилка під час визначення розміру файлу, будь ласка, імпортуйте знову." msgid "Preset path was not found; please reselect vendor." msgstr "Шлях до налаштувань не знайдено. Будь ласка, перевиберіть виробника." msgid "The printer model was not found, please reselect." msgstr "Модель принтера не було знайдено. Будь ласка, перевиберіть її." msgid "The nozzle diameter was not found; please reselect." msgstr "Діаметр сопла не знайдено. Будь ласка, перевиберіть його." msgid "The printer preset was not found; please reselect." msgstr "Налаштування принтера не знайдено. Будь ласка, перевиберіть його." msgid "Printer Preset" msgstr "Набір параметрів принтера" msgid "Filament Preset Template" msgstr "Шаблон набору параметрів філаменту" msgid "Process Preset Template" msgstr "Шаблон набору параметрів процесу" msgid "You have not yet chosen which printer preset to create based on. Please choose the vendor and model of the printer" msgstr "Ви ще не вибрали пресет принтера, на основі якого створювати. Будь ласка, виберіть виробника та модель принтера" # AI Translated msgid "You have entered a disallowed character in the printable area section on the first page. Please use only numbers." msgstr "Ви ввели недопустимий символ у розділі “Друкована область” на першій сторінці. Будь ласка, використовуйте лише цифри." msgid "" "The printer preset you created already has a preset with the same name. Do you want to overwrite it?\n" "\tYes: Overwrite the printer preset with the same name, and filament and process presets with the same preset name will be recreated \n" "and filament and process presets without the same preset name will be reserved.\n" "\tCancel: Do not create a preset; return to the creation interface." msgstr "" "Налаштування принтера, яке ви створили, вже має налаштування з такою ж назвою. Бажаєте перезаписати його?\n" "\tТак: Перезаписати налаштування принтера з такою ж назвою, і налаштування філаменту та процесу з \n" "такою ж назвою буде створено знову, а налаштування філаменту та процесу без такої ж назви буде збережено.\n" "\tСкасувати: Не створювати налаштування, повернутися до інтерфейсу створення." msgid "You need to select at least one filament preset." msgstr "Вам потрібно вибрати принаймні один пресет філаменту." msgid "You need to select at least one process preset." msgstr "Вам потрібно вибрати принаймні один пресет процесу." msgid "Create filament presets failed. As follows:\n" msgstr "Створення налаштувань філаменту не вдалося. Ось докладніше:\n" msgid "Create process presets failed. As follows:\n" msgstr "Створення налаштувань процесу не вдалося. Ось докладніше:\n" msgid "Vendor was not found; please reselect." msgstr "Виробника не знайдено, будь ласка, перевиберіть." msgid "Current vendor has no models, please reselect." msgstr "Поточний виробник не має моделей, будь ласка, перевиберіть." msgid "You have not selected the vendor and model or input the custom vendor and model." msgstr "Ви не вибрали виробника та модель або не ввели власного виробника та модель." msgid "There may be escape characters in the custom printer vendor or model. Please delete and re-enter." msgstr "Можливо, в власному виробнику або моделі принтера є керуючі послідовності. Будь ласка, видаліть їх і введіть ще раз." msgid "All inputs in the custom printer vendor or model are spaces. Please re-enter." msgstr "Усі введені дані в власному виробнику або моделі принтера є пропусками. Будь ласка, введіть ще раз." msgid "Please check bed printable shape and origin input." msgstr "Будь ласка, перевірте введення форми друку на ліжку та початкову точку." msgid "You have not yet selected the printer to replace the nozzle for; please choose a printer." msgstr "Ви ще не вибрали принтер, для якого потрібно замінити сопло. Будь ласка, оберіть." msgid "The entered nozzle diameter is invalid, please re-enter:\n" msgstr "Введений діаметр сопла неправильний, введіть ще раз:\n" # AI Translated msgid "" "The system preset does not allow creation. \n" "Please re-enter the printer model or nozzle diameter." msgstr "" "Системний пресет не дозволяє створення. \n" "Введіть модель принтера або діаметр сопла ще раз." msgid "" "\n" "\n" "Available nozzle profiles for this printer:" msgstr "" "\n" "\n" "Доступні профілі сопла для принтера:" msgid "" "\n" "\n" "Choose YES to switch existing preset:" msgstr "" "\n" "\n" "Оберіть ТАК, щоб перемкнутися на існуючий пресет:" msgid "Printer Created Successfully" msgstr "Створення принтера успішно завершено" msgid "Filament Created Successfully" msgstr "Створення філаменту успішно завершено" msgid "Printer Created" msgstr "Принтер створено" msgid "Please go to printer settings to edit your presets" msgstr "Будь ласка, перейдіть до налаштувань принтера, щоб редагувати свої пресети" msgid "Filament Created" msgstr "Філамент створено" # AI Translated msgid "" "Please go to filament settings to edit your presets if you need to.\n" "Please note that nozzle temperature, hot bed temperature, and maximum volumetric speed each have a significant impact on printing quality. Please set them carefully." msgstr "" "Будь ласка, перейдіть до налаштувань філаменту, щоб відредагувати свої пресети, якщо потрібно.\n" "Зверніть увагу, що температура сопла, температура столу та максимальна обʼємна швидкість мають значний вплив на якість друку. Будь ласка, встановлюйте їх обережно." msgid "" "\n" "\n" "Orca has detected that your user presets synchronization function is not enabled, which may result in unsuccessful Filament settings on the Device page.\n" "Click \"Sync user presets\" to enable the synchronization function." msgstr "" "\n" "\n" "Orca виявила, що функція синхронізації ваших попередніх налаштувань користувача не ввімкнена, що може призвести до невдалого налаштування нитки на сторінці пристрою.\n" "Натисніть «Синхронізувати пресети користувача», щоб увімкнути функцію синхронізації." msgid "Printer Setting" msgstr "Налаштування принтера" msgid "Printer config bundle(.orca_printer)" msgstr "Пакет конфігурації принтера (.orca_printer)" msgid "Filament bundle(.orca_filament)" msgstr "Пакет конфігурації ниток (.orca_filament)" msgid "Printer presets(.zip)" msgstr "Налаштування принтера (.zip)" msgid "Filament presets(.zip)" msgstr "Налаштування філаменту (.zip)" msgid "Process presets(.zip)" msgstr "Налаштування процесу (.zip)" msgid "initialize fail" msgstr "помилка ініціалізації" msgid "add file fail" msgstr "помилка додавання файлу" msgid "add bundle structure file fail" msgstr "помилка додавання файлу структури пакунка" msgid "finalize fail" msgstr "помилка завершення" msgid "open zip written fail" msgstr "помилка відкриття записаного файлу ZIP" msgid "Export successful" msgstr "Експорт успішний" #, c-format, boost-format msgid "" "The '%s' folder already exists in the current directory. Do you want to clear it and rebuild it?\n" "If not, a time suffix will be added, and you can modify the name after creation." msgstr "" "Папка ‘%s’ вже існує в поточному каталозі. Бажаєте очистити її і побудувати заново?\n" "Якщо ні, буде додано суфікс з часом, і ви зможете змінити ім’я після створення." #, c-format, boost-format msgid "" "The file: %s\n" "may have been opened by another program.\n" "Please close it and try again." msgstr "" "Файл: %s\n" "імовірно відкритий в іншій програмі.\n" "Закрийте його і повторіть ще раз." msgid "" "Printer and all the filament and process presets that belongs to the printer.\n" "Can be shared with others." msgstr "" "Принтер і всі нитки та налаштування процесу, які належать принтеру.\n" "Ними можна ділитись з іншими." msgid "" "User's filament preset set.\n" "Can be shared with others." msgstr "" "Налаштування філаменту користувача \n" "можна поділитися з іншими користувачами." msgid "Only display printers with changes to printer, filament, and process presets are displayed." msgstr "Показувати лише назви принтерів зі змінами у пресетах принтера, філаменту та процесу." msgid "Only display the filament names with changes to filament presets." msgstr "Показувати лише назви філаментів зі змінами у пресетах філаменту." msgid "Only printer names with user printer presets will be displayed, and each preset you choose will be exported as a ZIP archive." msgstr "Будуть відображатися лише назви принтерів з пресетами принтера користувача, і кожен обраний пресет буде експортовано у форматі ZIP." msgid "" "Only the filament names with user filament presets will be displayed, \n" "and all user filament presets in each filament name you select will be exported as a ZIP archive." msgstr "" "Будуть відображатися лише назви філаментів з налаштуваннями філаменту користувача, \n" "і всі налаштування філаменту користувача для кожної вибраної назви філаменту \n" "будуть експортовані у форматі ZIP." msgid "" "Only printer names with changed process presets will be displayed, \n" "and all user process presets in each printer name you select will be exported as a ZIP archive." msgstr "" "Будуть відображатися лише назви принтерів зі зміненими налаштуваннями процесу, \n" "і всі налаштування процесу користувача для кожної вибраної назви принтера будуть \n" "експортовані у форматі ZIP." msgid "Please select at least one printer or filament." msgstr "Будь ласка, виберіть принаймні один принтер або філамент." msgid "Please select a preset type you want to export" msgstr "Будь ласка, виберіть тип, який ви хочете експортувати" msgid "Failed to create temporary folder, please try Export Configs again." msgstr "Не вдалося створити тимчасову теку. Будь ласка, спробуйте експортувати налаштування знову." msgid "Edit Filament" msgstr "Змінити філамент" msgid "Filament presets under this filament" msgstr "Налаштування філаменту під цим філаментом" msgid "Note: If the only preset under this filament is deleted, the filament will be deleted after exiting the dialog." msgstr "Примітка: Якщо єдиний пресет під цим філаментом буде видалений, то філамент також буде видалений після виходу з діалогового вікна." msgid "Presets inherited by other presets cannot be deleted" msgstr "Пресети, що успадковуються іншими пресетами, не можуть бути видалені" # AI Translated msgid "The following presets inherits this preset." msgid_plural "The following preset inherits this preset." msgstr[0] "Профіль вказаний нижче, успадковується від поточного профілю." msgstr[1] "Профілі вказані нижче, успадковуються від поточного профілю." msgstr[2] "Профілі вказані нижче, успадковуються від поточного профілю." msgstr[3] "Профілі вказані нижче, успадковуються від поточного профілю." msgid "Delete Preset" msgstr "Видалити пресет" msgid "Are you sure to delete the selected preset?" msgstr "Ви впевнені, що хочете видалити вибраний пресет?" msgid "Delete preset" msgstr "Видалити профіль" msgid "+ Add Preset" msgstr "+ Додати пресет" msgid "" "All the filament presets belong to this filament would be deleted.\n" "If you are using this filament on your printer, please reset the filament information for that slot." msgstr "" "Всі набори параметрів філаменту, що належать до цього філаменту, будуть видалені.\n" "Якщо ви використовуєте цей філамент на своєму принтері, будь ласка, скиньте інформацію про філамент для цього слоту." msgid "Delete filament" msgstr "Видалити філамент" msgid "Add Preset" msgstr "Додати Налаштування" msgid "Add preset for new printer" msgstr "Додати пресет для нового принтера" msgid "Copy preset from filament" msgstr "Скопіювати пресет з філаменту" msgid "The filament choice not find filament preset, please reselect it" msgstr "Вибраний філамент не знайдено в пресетах філаменту. Будь ласка, перевиберіть його" msgid "[Delete Required]" msgstr "[Потрібно видалення]" msgid "Edit Preset" msgstr "Змінити пресет" msgid "For more information, please check out our Wiki" msgstr "Для отримання додаткової інформації, будь ласка, перевірте Вікі" msgid "Wiki" msgstr "Енциклопедія" msgid "Collapse" msgstr "Згорнути" msgid "Daily Tips" msgstr "Щоденні поради" # AI Translated msgid "" "The printer nozzle information has not been set.\n" "Please configure it before proceeding with the calibration." msgstr "" "Інформацію про сопло принтера не задано.\n" "Налаштуйте її, перш ніж продовжувати калібрування." # AI Translated msgid "" "The nozzle type does not match the actual printer nozzle type.\n" "Please click the Sync button above and restart the calibration." msgstr "" "Тип сопла не відповідає фактичному типу сопла принтера.\n" "Натисніть кнопку синхронізації вище та перезапустіть калібрування." #, c-format, boost-format msgid "Printing %1s material with %2s nozzle may cause nozzle damage." msgstr "Друк матеріалу %1s соплом %2s може призвести до пошкодження сопла." msgid "Need select printer" msgstr "Потрібно вибрати принтер" msgid "The start, end or step is not valid value." msgstr "Початок, кінець або крок не є дійсним значенням." msgid "The number of printer extruders and the printer selected for calibration does not match." msgstr "Кількість екструдерів не підходить для принтера, що було обрано для калібрування." # AI Translated #, c-format, boost-format msgid "The nozzle diameter of %s extruder is 0.2mm which does not support automatic Flow Dynamics calibration." msgstr "Діаметр сопла екструдера %s становить 0.2 мм, що не підтримує автоматичне калібрування динаміки потоку." # AI Translated #, c-format, boost-format msgid "" "The currently selected nozzle diameter of %s extruder does not match the actual nozzle diameter.\n" "Please click the Sync button above and restart the calibration." msgstr "" "Поточно вибраний діаметр сопла екструдера %s не відповідає фактичному діаметру сопла.\n" "Натисніть кнопку синхронізації вище та перезапустіть калібрування." # AI Translated msgid "" "The nozzle diameter does not match the actual printer nozzle diameter.\n" "Please click the Sync button above and restart the calibration." msgstr "" "Діаметр сопла не відповідає фактичному діаметру сопла принтера.\n" "Натисніть кнопку синхронізації вище та перезапустіть калібрування." # AI Translated #, c-format, boost-format msgid "" "The currently selected nozzle type of %s extruder does not match the actual printer nozzle type.\n" "Please click the Sync button above and restart the calibration." msgstr "" "Поточно вибраний тип сопла екструдера %s не відповідає фактичному типу сопла принтера.\n" "Натисніть кнопку синхронізації вище та перезапустіть калібрування." msgid "Unable to calibrate: maybe because the set calibration value range is too large, or the step is too small" msgstr "Неможливо калібрувати: можливо, через те, що діапазон встановлених значень калібрування занадто великий, або крок занадто малий" msgid "Physical Printer" msgstr "Фізичний принтер" msgid "Print Host upload" msgstr "Завантаження хоста друку" msgid "Select a Flashforge printer" msgstr "Вибрати принтер Flashforge" msgid "Discovered Printers" msgstr "Виявлення принтерів" msgid "Could not get a valid Printer Host reference" msgstr "Неможливо отримати дійсне посилання на хост принтера" # AI Translated msgid "Valid session not detected. Proceed with login to 3DPrinterOS?" msgstr "Дійсний сеанс не виявлено. Продовжити входом у 3DPrinterOS?" msgid "Success!" msgstr "Успішно!" msgid "Are you sure to log out?" msgstr "Ви впевнені, що вийшли?" msgid "View print host webui in Device tab" msgstr "Переглянути веб-інтерфейс друку у вкладці Пристрій" msgid "Replace the BambuLab's device tab with print host webui" msgstr "Замінити вкладку пристрою BambuLab на веб-інтерфейс друку" msgid "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-signed certificate." msgstr "Файл HTTPS CA є необов'язковим. Він необхідний лише під час використання HTTPS із сертифікатом." msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*" msgstr "Файли сертифікатів (*.crt, *.pem)|*.crt;*.pem|Всі файли|*.*" msgid "Open CA certificate file" msgstr "Відкрити файл сертифіката ЦС" #, c-format, boost-format msgid "On this system, %s uses HTTPS certificates from the system Certificate Store or Keychain." msgstr "У цій системі %s використовує HTTPS-сертифікати із системного сховища сертифікатів або Keychain." msgid "To use a custom CA file, please import your CA file into Certificate Store / Keychain." msgstr "Щоб використовувати власний файл ЦС, імпортуйте файл ЦС в сховище сертифікатів/Keychain." msgid "Login/Test" msgstr "Вхід/Тест" msgid "Connection to printers connected via the print host failed." msgstr "Не вдалося підключитися до принтерів, підключених через вузол друку." msgid "Detect Creality K-series printer" msgstr "Виявити принтер Creality K-серії" msgid "Click Scan to look for K-series printers on your network." msgstr "Клацніть Сканувати, щоб переглянути принтери K-серії у вашій мережі." msgid "Use Selected" msgstr "Використати вибране" msgid "Scanning the LAN for K-series printers... this takes a few seconds." msgstr "Сканування LAN на принтери K-серії... це може зайняти декілька секунд." msgid "No K-series printers found. Make sure the printer is on the same network and not blocked by Wi-Fi client isolation, then click Scan again." msgstr "Принтерів K-серії не знайдено. Переконайтеся що принтер в одній мережі і не заблокований клієнтським ізолюванням Wi-Fi, потім ще раз клацніть Сканувати." #, c-format msgid "Found %zu Creality printer(s). Select one and click Use Selected." msgstr "Знайдено %zu принетр(ів) Creality. Виберіть один і натисніть Використати вибране." msgid "Active" msgstr "Активний" msgid "Printers" msgstr "Принтери" msgid "Processes" msgstr "Процеси" msgid "Show/Hide system information" msgstr "Показати/Сховати інформацію системи" msgid "Copy system information to clipboard" msgstr "Копіювати системну інформацію до буфера обміну" # AI Translated msgid "We need information for diagnosing source of the issue. Check wiki page for detailed guide." msgstr "Нам потрібна інформація для встановлення джерела проблеми. Докладний посібник дивіться на сторінці wiki." # AI Translated msgid "Pack button collects project file and logs of current session onto a ZIP archive." msgstr "Кнопка «Пакувати» збирає файл проєкту та журнали поточного сеансу в один zip-файл." # AI Translated msgid "Any additional visual examples like images or screen recordings might be helpful while reporting the issue." msgstr "Будь-які додаткові наочні приклади, як-от зображення чи записи екрана, можуть допомогти під час повідомлення про проблему." msgid "Report issue" msgstr "Повідомити про проблему" # AI Translated msgid "Pack" msgstr "Пакувати" msgid "Cleans and rebuilds system profiles cache on next launch." msgstr "Очищає і перебудовує кеш системних профілів під час наступного запуску" msgid "Clean system profiles cache" msgstr "Очистити кеш системних профілів" msgid "Clean" msgstr "Очистити" msgid "Loaded profiles overview" msgstr "Перегляд завантажених профілів" msgid "This section shows information for loaded profiles." msgstr "Цей розділ показує інформацію про завантажені профілі" msgid "Exports detailed overview of loaded profiles in json format." msgstr "Експортує детальний огляд завантажених профілів у фаормат json" msgid "Configurations folder" msgstr "Тека конфігурації" msgid "Opens configurations folder." msgstr "Відкриває теку конфігурації" msgid "Log level" msgstr "Рівень журналу" msgid "Stored logs" msgstr "Збережені логи" msgid "Packs all stored logs onto a ZIP archive." msgstr "Запаковує всі збережені логи у файл zip." msgid "Profiles" msgstr "Профілі" msgid "Select NO to close dialog and review project." msgstr "Виберіть НІ, щоб закрити вікно і переглянути проєкт." msgid "No project file on current session. Only logs will be included to package" msgstr "Нема файла проєкту в поточному сеансі. Лише логи будуть включені до пакунку." msgid "Please make sure any instances of OrcaSlicer are not running" msgstr "Будь ласка, перевірте чи не запущено інші екземпляри OrcaSlicer" msgid "System folder cannot be deleted because some files are in use by another application. Please close any applications using these files and try again." msgstr "Системну теку неможливо видалити, тому що деякі файли використовуються іншою програмою. Будь ласка, закрийте будь-які програми, що використовують ці файли і спробуйте ще раз." msgid "Failed to delete system folder..." msgstr "Не вдалося видалити системну теку..." msgid "Failed to determine executable path." msgstr "Не вдалося визначити виконуваний шлях." msgid "Failed to launch a new instance." msgstr "Не вдалося запустити новий екземпляр." msgid "log(s)" msgstr "лог(и)" msgid "Choose where to save the exported JSON file" msgstr "Оберіть де зберегти експортований файл JSON" msgid "" "Export failed\n" "Please check write permissions or file in use by another application" msgstr "" "Не вдалося експортувати\n" "Будь ласка, перевірте дозволи на запис і чи файл не використовується іншою програмою" msgid "Choose where to save the exported ZIP file" msgstr "Оберіть де зберегти експортований ZIP-файл" msgid "File already exists. Overwrite?" msgstr "Файл вже існує. Перезаписати?" msgid "3DPrinterOS Cloud upload options" msgstr "Параметри відвантаження на 3DPrinterOS" msgid "Single file" msgstr "Один файл" msgid "Project File" msgstr "Файл проєкту" msgid "Project:" msgstr "Проєкт:" msgid "Printer type:" msgstr "Тип принтера:" msgid "Printer type not found, please select manually." msgstr "Тип принтера не знайдено, будь ласка виберіть вручну." msgid "Authorizing..." msgstr "Авторизування..." msgid "Error. Can't get API token for authorization" msgstr "Помилка. Не вдалося отримати api-токен для авторизування" msgid "Could not parse server response." msgstr "Не можливо розпізнати відповідь сервера." msgid "Error saving session to file" msgstr "Помилка зберігання сеансу у файл" msgid "Error session check" msgstr "Помилка перевірки сеансу" msgid "Error during file upload" msgstr "Помилка під час відвантаження файлу" #, c-format, boost-format msgid "Mismatched type of print host: %s" msgstr "Невідповідність типу принт-сервера: %s" msgid "Connection to AstroBox is working correctly." msgstr "З’єднання з AstroBox працює коректно." msgid "Could not connect to AstroBox" msgstr "Не вдалося з’єднатися з AstroBox" msgid "Note: AstroBox version 1.1.0 or higher is required." msgstr "Примітка: Для AstroBox потрібна версія щонайменше 1.1.0." msgid "Connection to Duet is working correctly." msgstr "З’єднання з Duet працює коректно." msgid "Could not connect to Duet" msgstr "Не вдалося з’єднатися з Duet" msgid "Unknown error occurred" msgstr "Сталася невідома помилка" msgid "Wrong password" msgstr "Неправильний пароль" msgid "Could not get resources to create a new connection" msgstr "Не вдалося отримати ресурси для створення нового з’єднання" msgid "Upload not enabled on FlashAir card." msgstr "Завантаження не активовано на картці FlashAir." msgid "Connection to FlashAir is working correctly and upload is enabled." msgstr "З’єднання з FlashAir працює коректно, і завантаження активовано." msgid "Could not connect to FlashAir" msgstr "Не вдалося з’єднатися з FlashAir" msgid "Note: FlashAir with firmware 2.00.02 or newer and activated upload function is required." msgstr "Примітка: Для FlashAir потрібна прошивка версії 2.00.02 або новіша з активованою функцією завантаження." msgid "Connection to MKS is working correctly." msgstr "З’єднання з MKS працює коректно." msgid "Could not connect to MKS" msgstr "Не вдалося підключитися до MKS" msgid "Connection to Moonraker is working correctly." msgstr "Зʼєднання з Moonraker працює коректно." msgid "Could not connect to Moonraker" msgstr "Не вдалося зʼєднатися з Moonraker" # AI Translated msgid "The host responded but it doesn't look like Moonraker (missing result.klippy_state)." msgstr "Хост відповів, але це не схоже на Moonraker (відсутній result.klippy_state)." #, c-format, boost-format msgid "Could not parse Moonraker server response: %s" msgstr "Не вдалося розпізнати відповідь сервера Moonraker: %s" msgid "Connection to OctoPrint is working correctly." msgstr "Підключення до OctoPrint працює правильно." msgid "Could not connect to OctoPrint" msgstr "Не вдалося підключитися до OctoPrint" msgid "Note: OctoPrint version 1.1.0 or higher is required." msgstr "Примітка. Потрібна версія OctoPrint не нижче 1.1.0." msgid "Connection to Prusa SL1 / SL1S is working correctly." msgstr "Підключення до Prusa SL1 / SL1S працює правильно." msgid "Could not connect to Prusa SLA" msgstr "Не вдалося підключитися до Prusa SLA" msgid "Connection to PrusaLink is working correctly." msgstr "Підключення до PrusaLink працює коректно." msgid "Could not connect to PrusaLink" msgstr "Не вдалося підключитися до PrusaLink" msgid "Storages found" msgstr "Сховища знайдено" #. TRN %1% = storage path #, boost-format msgid "%1% : read only" msgstr "%1% : лише читання" #. TRN %1% = storage path #, boost-format msgid "%1% : no free space" msgstr "%1% : немає вільного місця" #. TRN %1% = host #, boost-format msgid "Upload has failed. There is no suitable storage found at %1%." msgstr "Відбулася помилка завантаження. За адресою %1% не знайдено відповідного сховища." msgid "Connection to Prusa Connect is working correctly." msgstr "Підключення до Prusa Connect працює коректно." msgid "Could not connect to Prusa Connect" msgstr "Не вдалося підключитися до Prusa Connect" msgid "Connection to Repetier is working correctly." msgstr "Підключення до Repetier працює правильно." msgid "Could not connect to Repetier" msgstr "Не вдалося підключитися до Repetier" msgid "Note: Repetier version 0.90.0 or higher is required." msgstr "Примітка: потрібна версія Repetier принаймні 0.90.0." #, boost-format msgid "" "HTTP status: %1%\n" "Message body: \"%2%\"" msgstr "" "Статус HTTP: %1%\n" "Тіло повідомлення: “%2%" #, boost-format msgid "" "Parsing of host response failed.\n" "Message body: \"%1%\"\n" "Error: \"%2%\"" msgstr "" "Помилка аналізу відповіді хоста.\n" "Тіло повідомлення: “%1%”\n" "Помилка: “%2%”" #, boost-format msgid "" "Enumeration of host printers failed.\n" "Message body: \"%1%\"\n" "Error: \"%2%\"" msgstr "" "Помилка переліку хост-принтерів.\n" "Тіло повідомлення: “%1%”\n" "Помилка: “%2%”" msgid "It has a small layer height. This results in almost negligible layer lines and high print quality. It is suitable for most printing cases." msgstr "Він має малу висоту шару, що призводить до майже непомітних ліній шаруватості та високої якості друку. Він підходить для більшості загальних випадків друку." msgid "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds and acceleration, and the sparse infill pattern is Gyroid. This results in much higher print quality but a much longer print time." msgstr "Порівняно з типовим профілем для насадки 0,2 мм, він має менші швидкості і прискорення, а також розріджену структуру наповнення у вигляді гіроїда. Таким чином, він забезпечує значно вищу якість друку, але при цьому друкується значно довше." msgid "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height. This results in almost negligible layer lines and slightly shorter print time." msgstr "Порівняно з типовим профілем для насадки 0,2 мм, він має трохи більшу висоту шару, що призводить до майже непомітних ліній шаруватості та трохи коротший час друку." msgid "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer height. This results in slightly visible layer lines but shorter print time." msgstr "Порівняно з типовим профілем для насадки 0,2 мм, він має більшу висоту шару, що призводить до слабко видимих ліній шаруватості, але при цьому друкується трохи швидше." # AI Translated msgid "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height. This results in almost invisible layer lines and higher print quality but longer print time." msgstr "Порівняно з типовим профілем для сопла 0.2 мм має меншу висоту шару. Це дає майже непомітні лінії шарів і вищу якість друку, але довший час друку." msgid "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. This results in almost invisible layer lines and much higher print quality but much longer print time." msgstr "Порівняно з типовим профілем для насадки 0,2 мм, цей профіль має меншу кількість ліній шарування, менші швидкості і прискорення, і розріджене наповнення виконане у вигляді геометрії “Gyroid”. Таким чином, він забезпечує майже невидимі лінії шарування та значно вищу якість друку, але довший час друку." # AI Translated msgid "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height. This results in minimal layer lines and higher print quality but longer print time." msgstr "Порівняно з типовим профілем для сопла 0.2 мм має меншу висоту шару. Це дає мінімальні лінії шарів і вищу якість друку, але довший час друку." msgid "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. This results in minimal layer lines and much higher print quality but much longer print time." msgstr "Порівняно з типовим профілем для насадки 0,2 мм, цей профіль має меншу кількість ліній шарування, менші швидкості та прискорення, а також розріджене наповнення виконане у вигляді геометрії “Gyroid”. Таким чином, він забезпечує мінімальні лінії шарування та значно вищу якість друку, але збільшує час друку." msgid "It has a normal layer height. This results in average layer lines and print quality. It is suitable for most printing cases." msgstr "Він має загальну висоту шару та призводить до загальних ліній шарування і якості друку. Він підходить для більшості загальних випадків друку." msgid "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops and a higher sparse infill density. This results in higher print strength but more filament consumption and longer print time." msgstr "Порівняно з типовим профілем для насадки діаметром 0,4 мм, цей профіль має більше кількість обводок стін та вищу щільність розрідженого наповнювача. Таким чином, він забезпечує більшу міцність друків, але вимагає більше витрати філаменту та більшого часу друку." msgid "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height. This results in more apparent layer lines and lower print quality, but slightly shorter print time." msgstr "Порівняно з типовим профілем для насадки діаметром 0,4 мм, цей профіль має більшу висоту шару, що призводить до більш помітних ліній шарування та меншої якості друку, але трохи скорочує час друку." msgid "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height. This results in more apparent layer lines and lower print quality, but shorter print time." msgstr "Порівняно з типовим профілем для насадки діаметром 0,4 мм, цей профіль має більшу висоту шару, що призводить до більш помітних ліній шарування та меншої якості друку, але скорочує час друку." msgid "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height. This results in less apparent layer lines and higher print quality but longer print time." msgstr "Порівняно з типовим профілем для насадки діаметром 0,4 мм, цей профіль має меншу висоту шару, що призводить до менш помітних ліній шарування та вищої якості друку, але збільшує час друку." msgid "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. This results in less apparent layer lines and much higher print quality but much longer print time." msgstr "Порівняно з типовим профілем для насадки діаметром 0,4 мм, цей профіль має меншу висоту шару, менші швидкості і прискорення, а також розріджений внутрішній наповнювач у вигляді геоіда. Таким чином, це призводить до менш помітних ліній шарування та значно вищої якості друку, але збільшує час друку." msgid "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height. This results in almost negligible layer lines and higher print quality but longer print time." msgstr "Порівняно з типовим профілем для насадки діаметром 0,4 мм, цей профіль має меншу висоту шару, що призводить до майже непомітних ліній шарування та вищої якості друку, але збільшує час друку." msgid "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. This results in almost negligible layer lines and much higher print quality but much longer print time." msgstr "Порівняно з типовим профілем для насадки діаметром 0,4 мм, цей профіль має меншу висоту шару, менші швидкості та прискорення, а також розріджений малюнок наповнення у вигляді геоїда. Тому він має майже непомітні лінії шарування і набагато вищу якість друку, але значно довший час друку." msgid "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height. This results in almost negligible layer lines and longer print time." msgstr "Порівняно з типовим профілем для насадки діаметром 0,4 мм, цей профіль має меншу висоту шару, що призводить до майже непомітних ліній шарування, але також збільшує час друку." msgid "It has a big layer height. This results in apparent layer lines and ordinary print quality and print time." msgstr "Він має велику висоту шару, що призводить до видимих ліній шарування і звичайної якості друку та часу друку." msgid "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops and a higher sparse infill density. This results in higher print strength but more filament consumption and longer print time." msgstr "Порівняно з типовим профілем з 0,6 мм сопла, він має більше стінних петель і вищу щільність розрідженого наповнювача. Таким чином, він забезпечує більшу міцність друків, але споживає більше філаменту і має довший час друку." msgid "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height. This results in more apparent layer lines and lower print quality, but shorter print time in some cases." msgstr "Порівняно з типовим профілем з 0,6 мм сопла, він має більшу висоту шару, що призводить до більш помітних ліній шару та нижчої якості друку, але коротшого часу друку у деяких випадках друку." msgid "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height. This results in much more apparent layer lines and much lower print quality, but shorter print time in some cases." msgstr "Порівняно з типовим профілем з 0,6 мм сопла, він має більшу висоту шару, що призводить до набагато більш помітних ліній шару та значно нижчої якості друку, але коротшого часу друку у деяких випадках друку." msgid "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height. This results in less apparent layer lines and slight higher print quality but longer print time." msgstr "Порівняно з типовим профілем з 0,6 мм сопла, він має меншу висоту шару, що призводить до менш помітних ліній шару і трохи вищої якості друку, але довшого часу друку." msgid "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height. This results in less apparent layer lines and higher print quality but longer print time." msgstr "Порівняно з типовим профілем з 0,6 мм сопла, він має меншу висоту шару, що призводить до менш помітних ліній шару та вищої якості друку, але більш тривалого часу друку." # AI Translated msgid "It has a very big layer height. This results in very apparent layer lines, low print quality and shorter print time." msgstr "Має дуже велику висоту шару. Це дає дуже помітні лінії шарів, низьку якість друку та коротший час друку." # AI Translated msgid "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height. This results in very apparent layer lines and much lower print quality, but shorter print time in some cases." msgstr "Порівняно з типовим профілем для сопла 0.8 мм має більшу висоту шару. Це дає дуже помітні лінії шарів і значно нижчу якість друку, але в деяких випадках коротший час друку." # AI Translated msgid "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger layer height. This results in extremely apparent layer lines and much lower print quality, but much shorter print time in some cases." msgstr "Порівняно з типовим профілем для сопла 0.8 мм має значно більшу висоту шару. Це дає надзвичайно помітні лінії шарів і значно нижчу якість друку, але в деяких випадках значно коротший час друку." msgid "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height. This results in slightly less but still apparent layer lines and slightly higher print quality but longer print time in some cases." msgstr "Порівняно з типовим профілем для сопла 0,8 мм, цей профіль має трохи меншу висоту шару, що призводить до трохи менше, але все ще помітних ліній шару і трохи вищої якості друку, але довшого часу друку у деяких випадках друку." # AI Translated msgid "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer height. This results in less but still apparent layer lines and slightly higher print quality but longer print time in some cases." msgstr "Порівняно з типовим профілем для сопла 0.8 мм має меншу висоту шару. Це дає менш виражені, але все ще помітні лінії шарів і трохи вищу якість друку, проте в деяких випадках довший час друку." msgid "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances." msgstr "Це ні філамент, який широко використовується, ні один з філаментів Bambu, і він значно відрізняється від бренду до бренду. Тому високо рекомендується звернутися до його постачальника за відповідним профілем перед друкуванням і налаштувати деякі параметри відповідно до його характеристик." msgid "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials." msgstr "При друкуванні з цього філамента існує ризик деформації та низької адгезії між шарами. Щоб отримати кращі результати, будь ласка, ознайомтеся з цією вікі: Поради з друку для матеріалів високої температури / інженерних матеріалів." msgid "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials." msgstr "При друкуванні з цього філамента існує ризик забивання сопла, витікання, деформації та низької адгезії між шарами. Щоб отримати кращі результати, будь ласка, ознайомтеся з цією вікі: Поради з друку для матеріалів високої температури / інженерних матеріалів." msgid "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG." msgstr "Щоб отримати кращі прозорі або напівпрозорі результати з відповідним філаментом, будь ласка, ознайомтеся з цією вікі: Поради з друку для прозорого PETG." msgid "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing." msgstr "Щоб надати друкам вищий блиск, будь ласка, просушіть філамент перед використанням і встановіть швидкість зовнішньої стіни на 40-60 мм/с під час нарізання." msgid "This filament is only used to print models with a low density usually, and some special parameters are required. To get better printing quality, please refer to this wiki: Instructions for printing RC model with foaming PLA (PLA Aero)." msgstr "Цей філамент зазвичай використовується лише для друку моделей з низькою щільністю, і для нього потрібні деякі спеціальні параметри. Щоб отримати кращу якість друку, будь ласка, ознайомтеся з цією вікі: Інструкції з друку RC моделей з пінопласту PLA (PLA Aero)." msgid "This filament is only used to print models with a low density usually, and some special parameters are required. To get better printing quality, please refer to this wiki: ASA Aero Printing Guide." msgstr "Цей філамент зазвичай використовується лише для друку моделей з низькою щільністю, і для нього потрібні деякі спеціальні параметри. Щоб отримати кращу якість друку, будь ласка, ознайомтеся з цією вікі: Посібник з друку ASA Aero." msgid "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide." msgstr "Цей філамент занадто м’який і не сумісний з AMS. Друк з нього має багато вимог, і для отримання кращої якості друку, будь ласка, ознайомтеся з цією вікі: Посібник з друку TPU." msgid "This filament has high enough hardness (about 67D) and is compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide." msgstr "Цей філамент має достатню твердість (приблизно 67D) і сумісний з AMS. Друк з нього має багато вимог, і для отримання кращої якості друку, будь ласка, ознайомтеся з цією вікі: Посібник з друку TPU." msgid "If you are to print a kind of soft TPU, please don't slice with this profile, and it is only for TPU that has high enough hardness (not less than 55D) and is compatible with the AMS. To get better printing quality, please refer to this wiki: TPU printing guide." msgstr "Якщо ви збираєтеся друкувати м’який TPU, будь ласка, не нарізайте його з цим профілем; цей профіль призначений лише для TPU з достатньою твердістю (не менше 55D) і сумісного з AMS. Щоб отримати кращу якість друку, будь ласка, ознайомтеся з цією вікі: Посібник з друку TPU." msgid "This is a water-soluble support filament, and usually it is only for the support structure and not for the model body. Printing this filament is of many requirements, and to get better printing quality, please refer to this wiki: PVA Printing Guide." msgstr "Це філамент, що розчиняється у воді, і зазвичай він призначений лише для підтримуючої структури, а не для тіла моделі. Друк з цього філамента має багато вимог, і для отримання кращої якості друку, будь ласка, ознайомтеся з цією вікі: Посібник з друку PVA." msgid "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function." msgstr "Це філамент для підтримки, що не розчиняється у воді, і зазвичай він призначений лише для підтримуючої структури, а не для тіла моделі. Щоб отримати кращу якість друку, будь ласка, ознайомтеся з цією вікі: Поради з друку для філамента підтримки та функції підтримки." msgid "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets." msgstr "Загальні пресети налаштовані консервативно для сумісності з більш широким спектром філаментів. Для досягнення вищої якості друку та швидкості, будь ласка, використовуйте філаменти Bambu з пресетами Bambu." # AI Translated msgid "High quality profile for 0.2mm nozzle, prioritizing print quality." msgstr "Профіль високої якості для сопла 0.2 мм, з пріоритетом якості друку." # AI Translated msgid "High quality profile for 0.16mm layer height, prioritizing print quality and strength." msgstr "Профіль високої якості для висоти шару 0.16 мм, з пріоритетом якості друку та міцності." # AI Translated msgid "Standard profile for 0.16mm layer height, prioritizing speed." msgstr "Стандартний профіль для висоти шару 0.16 мм, з пріоритетом швидкості." # AI Translated msgid "High quality profile for 0.2mm layer height, prioritizing strength and print quality." msgstr "Профіль високої якості для висоти шару 0.2 мм, з пріоритетом міцності та якості друку." # AI Translated msgid "Standard profile for 0.4mm nozzle, prioritizing speed." msgstr "Стандартний профіль для сопла 0.4 мм, з пріоритетом швидкості." # AI Translated msgid "High quality profile for 0.6mm nozzle, prioritizing print quality and strength." msgstr "Профіль високої якості для сопла 0.6 мм, з пріоритетом якості друку та міцності." # AI Translated msgid "Strength profile for 0.6mm nozzle, prioritizing strength." msgstr "Профіль міцності для сопла 0.6 мм, з пріоритетом міцності." # AI Translated msgid "Standard profile for 0.6mm nozzle, prioritizing speed." msgstr "Стандартний профіль для сопла 0.6 мм, з пріоритетом швидкості." # AI Translated msgid "High quality profile for 0.8mm nozzle, prioritizing print quality." msgstr "Профіль високої якості для сопла 0.8 мм, з пріоритетом якості друку." # AI Translated msgid "Strength profile for 0.8mm nozzle, prioritizing strength." msgstr "Профіль міцності для сопла 0.8 мм, з пріоритетом міцності." # AI Translated msgid "Standard profile for 0.8mm nozzle, prioritizing speed." msgstr "Стандартний профіль для сопла 0.8 мм, з пріоритетом швидкості." msgid "No AMS" msgstr "Немає AMS" msgid "There is no device available to send printing." msgstr "Немає пристрою для надсилання друку." msgid "The number of printers in use simultaneously cannot be equal to 0." msgstr "Кількість принтерів, що використовуються одночасно, не може дорівнювати 0." msgid "Use External Spool" msgstr "Використовуйте зовнішню катушку" msgid "Select Printers" msgstr "Вибрати принтери" msgid "Device Name" msgstr "Назва пристрою" msgid "Device Status" msgstr "Статус пристрою" msgid "AMS Status" msgstr "Статус AMS" msgid "Please select the devices you would like to manage here (up to 6 devices)" msgstr "Будь ласка, виберіть тут пристрої, якими ви хочете керувати (до 6 пристроїв)" msgid "Printing Options" msgstr "Параметри друку" msgid "Flow Dynamic Calibration" msgstr "Динамічне калібрування потоку" msgid "Send Options" msgstr "Параметри відправки" msgid "Send to" msgstr "Відправити на" msgid "printers at the same time. (It depends on how many devices can undergo heating at the same time.)" msgstr "друкувати одночасно (це залежить від того, скільки пристроїв можуть нагріватися одночасно)." msgid "Wait" msgstr "Чекайте" msgid "minute each batch. (It depends on how long it takes to complete heating.)" msgstr "хвилин на кожну партію. (Це залежить від того, скільки часу потрібно на нагрівання)." msgid "Task Sending" msgstr "Відправка завдання" msgid "Task Sent" msgstr "Завдання надіслане" msgid "Edit multiple printers" msgstr "Змінити декілька принтерів" msgid "Select connected printers (0/6)" msgstr "Вибрати підключені принтери (0/6)" #, c-format, boost-format msgid "Select Connected Printers (%d/6)" msgstr "Вибрати підключені принтери (%d/6)" #, c-format, boost-format msgid "The maximum number of printers that can be selected is %d" msgstr "Максимальна кількість принтерів, які можна вибрати, становить %d" msgid "No task" msgstr "Немає завдань" msgid "Edit Printers" msgstr "Змінити принтери" msgid "Task Name" msgstr "Назва завдання" msgid "Actions" msgstr "Дії" msgid "Task Status" msgstr "Статус завдання" msgid "Sent Time" msgstr "Час відправлення" msgid "There are no tasks to be sent!" msgstr "Немає завдань для відправлення!" msgid "No historical tasks!" msgstr "Історії завдань немає!" msgid "Upgrading" msgstr "Оновлення" msgid "Syncing" msgstr "синхронізація" msgid "Printing Finish" msgstr "Друк завершено" msgid "Printing Failed" msgstr "Не вдалося надрукувати" msgid "Printing Pause" msgstr "Друк призупинено" msgid "Pending" msgstr "Очікує" msgid "Sending" msgstr "Надсилання" msgid "Sending Finish" msgstr "Надсилання завершено" msgid "Sending Cancel" msgstr "Надсилання скасовано" msgid "Sending Failed" msgstr "Не вдалося відправити" msgid "Print Success" msgstr "Успішно надруковано" msgid "Print Failed" msgstr "Не вдалося надрукувати" msgid "Removed" msgstr "Вилучено" msgid "Enable smart filament assign: Assign one filament to multiple nozzles to maximize savings" msgstr "Дозволити розумне призначення філаменту: Призначте одну нитку до кількох сопел, щоб максимально заощадити" # AI Translated msgid "File Saving" msgstr "Збереження файлу" msgid "Don't remind me again" msgstr "Не нагадувати мені більше" # AI Translated msgid "No further pop-up will appear. You can reopen it in 'Preferences'" msgstr "Більше не зʼявлятиметься спливне вікно. Ви можете знову відкрити його в «Параметрах»" msgid "Filament-Saving Mode" msgstr "Режим збереження філаменту" msgid "Convenience Mode" msgstr "Зручний режим" msgid "Custom Mode" msgstr "Власний режим" # AI Translated msgid "Generates filament grouping for the left and right nozzles based on the most filament-saving principles to minimize waste." msgstr "Створює групування філаментів для лівого та правого сопел за принципом максимальної економії філаменту, щоб мінімізувати відходи." # AI Translated msgid "Generates filament grouping for the left and right nozzles based on the printer's actual filament status, reducing the need for manual filament adjustment." msgstr "Створює групування філаментів для лівого та правого сопел на основі фактичного стану філаментів у принтері, зменшуючи потребу в ручному налаштуванні філаментів." msgid "Manually assign filament to the left or right nozzle" msgstr "Вручну призначити філамент для лівого або правого сопла" msgid "Global settings" msgstr "Глобальні налаштування" msgid "Video tutorial" msgstr "Відео-урок" msgid "(Sync with printer)" msgstr "(Синхронізувати з принтером)" #, c-format, boost-format msgid "Error: %s extruder has no available %s nozzle, current group result is invalid." msgstr "Помилка: Екструдер %s не має доступного сопла %s, поточний результат групування неправильний." msgid "We will slice according to this grouping method:" msgstr "Ми будемо нарізати згідно цього методу групування:" msgid "Tip: You can drag the filaments to reassign them to different nozzles." msgstr "Порада: Ви можете перетягувати філаменти, щоб перепризначати їх різним соплам." msgid "Please adjust your grouping or click " msgstr "Відкоригуйте групування або клацніть " msgid " to set nozzle count" msgstr " щоб вказати кількість сопел" msgid "Set the physical nozzle count..." msgstr "Вказати кількість фізичних сопел..." msgid "The filament grouping method for current plate is determined by the dropdown option at the slicing plate button." msgstr "Метод групування ниток для поточної пластини визначається опцією зі спадного списку на кнопці пластини для нарізки." msgid "Connected to Obico successfully!" msgstr "Підключення до Obico успішно!" msgid "Could not connect to Obico" msgstr "Не вдалося зʼєднатися з Obico" msgid "Connected to SimplyPrint successfully!" msgstr "Успішне підключення до SimplyPrint!" msgid "Could not connect to SimplyPrint" msgstr "Не вдалося підключитися до SimplyPrint" msgid "Internal error" msgstr "Внутрішня помилка" msgid "Unknown error" msgstr "Невідома помилка" msgid "SimplyPrint account not linked. Go to Connect options to set it up." msgstr "Обліковий запис SimplyPrint не пов’язано. Щоб налаштувати його, перейдіть до параметрів підключення." msgid "Flashforge returned an invalid JSON response." msgstr "Flashforge повернув неправильну відповідь JSON." msgid "No Flashforge printers were discovered on the local network." msgstr "Не виявлено принтерів Flashforge в локальній мережі." msgid "Connected to Flashforge local API successfully." msgstr "Підʼєднання до локальної API Flashforge успішне." msgid "Serial connection to Flashforge is working correctly." msgstr "Серійне зʼєднання до Flashforge працює коректно." msgid "Could not connect to Flashforge local API" msgstr "Не можливо зʼєднатися з локальною API Flashforge" msgid "Could not connect to Flashforge via serial" msgstr "Не можливо підʼєднатися до Flashforge по серійному номеру" msgid "Flashforge local API requires both serial number and access code." msgstr "Локальна API Flashforge вимагає серійний номер і код доступу." msgid "Printer returned an error" msgstr "Принтер повернув помилку" msgid "Missing system_info in response" msgstr "Пропущено system_info у відповіді" msgid "Missing printer serial number in response" msgstr "Пропущено серійний номер принтера у відповіді" msgid "Error parsing response" msgstr "Помилка розпізнавання відповіді" msgid "ElegooLink not detected" msgstr "ElegooLink не виявлено" msgid "Invalid access code" msgstr "Неправильний код доступу" msgid "CC2 device not detected" msgstr "Пристрій CC2 не виявлено" msgid "Connection to ElegooLink is working correctly." msgstr "Зʼєднання з ElegooLink працює коректно." msgid "Could not connect to ElegooLink" msgstr "Не можливо підʼєднатися до ElegooLink" #, boost-format msgid "Error code: %1%" msgstr "Код помилки: %1%" msgid "Upload failed" msgstr "Не вдалося відвантажити" # AI Translated msgid "The file has been transferred, but some unknown errors occurred. Please check the device page for the file and try to start printing again." msgstr "Файл передано, але сталися невідомі помилки. Перевірте файл на сторінці пристрою та спробуйте почати друк знову." msgid "Failed to open file for upload." msgstr "Не вдалося відкрити файл для відвантаження." msgid "Failed to read file chunk for upload." msgstr "Не вдалося прочитати фрагмент файлу для відвантаження." msgid "CC2 upload failed" msgstr "Не вдалося вивантажити CC2" msgid "The file is empty or could not be read." msgstr "Файл порожній або не можливо зчитати." msgid "Failed to calculate file checksum." msgstr "Не вдалося обрахувати контрольну суму файлу." msgid "Error code not found" msgstr "Код помилки не знайдено" # AI Translated msgid "The printer is busy, please check the device page for the file and try to start printing again." msgstr "Принтер зайнятий, перевірте файл на сторінці пристрою та спробуйте почати друк знову." msgid "The file is lost, please check and try again." msgstr "Файл втрачено, перевірте і спробуйте ще раз." msgid "The file is corrupted, please check and try again." msgstr "Файл пошкоджений, перевірте і спробуйте ще раз." # AI Translated msgid "Transmission abnormality, please check and try again." msgstr "Аномалія передавання, перевірте та спробуйте ще раз." msgid "The file does not match the printer, please check and try again." msgstr "Файл не відповідає принтеру, перевірте і спробуйте ще раз." msgid "Start print timeout" msgstr "Час початку друку вийшов" msgid "Start print failed" msgstr "Не вдалося розпочати друк" msgid "Connected to CrealityPrint successfully!" msgstr "Успішно підʼєднано до CrealityPrint!" msgid "Could not connect to CrealityPrint" msgstr "Не вдалося підʼєднатися до CrealityPrint" # AI Translated msgid "Connection timed out. Please check if the printer and computer network are functioning properly, and confirm that they are on the same network." msgstr "Час очікування підключення вичерпано. Перевірте, чи мережа принтера та компʼютера працює належним чином, і переконайтеся, що вони в одній мережі." # AI Translated msgid "The Hostname/IP/URL could not be parsed, please check it and try again." msgstr "Не вдалося розібрати Hostname/IP/URL, перевірте його та спробуйте ще раз." # AI Translated msgid "File/data transfer interrupted. Please check the printer and network, then try it again." msgstr "Передавання файлу/даних перервано. Перевірте принтер і мережу, а потім спробуйте ще раз." msgid "The provided state is not correct." msgstr "Наданий стан невірний." msgid "Please give the required permissions when authorizing this application." msgstr "Надайте необхідні дозволи під час авторизації цієї програми." msgid "Something unexpected happened when trying to log in, please try again." msgstr "Під час спроби входу трапилося щось несподіване. Повторіть спробу." msgid "User canceled." msgstr "Користувача скасовано." msgid "Max angle" msgstr "Максимальний кут" msgid "Detection radius" msgstr "Радіус виявлення" msgid "Selected" msgstr "Вибрано" msgid "Auto-generate" msgstr "Авто-генерування" msgid "Generate brim ears using Max angle and Detection radius" msgstr "Згенерувати краєчки за допомогою максимального кута і радіусу виявлення" msgid "Add or Select" msgstr "Додати або вибрати" msgid "Warning: The brim type is not set to \"painted\", the brim ears will not take effect!" msgstr "Попередження: Тип краєчка не встановлено на “пофарбований”, краєчки не матимуть ефекту!" msgid "Set the brim type of this object to \"painted\"" msgstr "Встановити тип краєчка для цього обʼєкту на \"намальований\"" msgid "invalid brim ears" msgstr "неправильні краєчки" msgid "Brim Ears" msgstr "Краєчки" msgid "Please select single object." msgstr "Будь ласка, виберіть один об’єкт." msgid "Entering Brim Ears" msgstr "Вхід у краєчки" msgid "Leaving Brim Ears" msgstr "Вихід з краєчок" msgid "Zoom Out" msgstr "Зменшити" msgid "Zoom In" msgstr "Збільшити" msgid "Load skipping objects information failed. Please try again." msgstr "Не вдалося завантажити інформацію про пропускання обʼєктів. Спробуйте ще раз." msgid "Failed to create the temporary folder." msgstr "Не вдалося створити тимчасову теку." #, c-format, boost-format msgid "/%d Selected" msgstr "/%d виділено" msgid "Nothing selected" msgstr "Нічого не вибрано" msgid "Over 64 objects in single plate" msgstr "На одній пластині більше ніж 60 обʼєктів" msgid "The current print job cannot be skipped" msgstr "Поточне завдання друку не можливо пропустити" msgid "Skipping all objects." msgstr "Пропускання всіх обʼєктів." msgid "The printing job will be stopped. Continue?" msgstr "Друк буде зупинено. Продовжити?" #, c-format, boost-format msgid "Skipping %d objects." msgstr "Пропускання %d обʼєктів." msgid "This action cannot be undone. Continue?" msgstr "Дію не можливо завершити. Продовжити?" msgid "Skipping objects." msgstr "Пропускання обʼєктів." msgid "Material Ratio" msgstr "" msgid "Model Height" msgstr "" msgid "Ratio" msgstr "" msgid "Select Filament" msgstr "Вибрати філамент" msgid "Null Color" msgstr "Без кольору" msgid "Multiple Color" msgstr "Декілька кольорів" msgid "Official Filament" msgstr "Офіційний філамент" msgid "More Colors" msgstr "Більше кольорів" msgid "Network Plug-in Update Available" msgstr "Доступне оновлення мережевого плагіна" msgid "Bambu Network Plug-in Required" msgstr "Потрібен мережевий плагін Bambu" msgid "The Bambu Network Plug-in is corrupted or incompatible. Please reinstall it." msgstr "Мережевий плагін Bambu пошкоджений або несумісний. Перевстановіть його." msgid "The Bambu Network Plug-in is required for cloud features, printer discovery, and remote printing." msgstr "Мережевий плагін Bambu потрібен для можливостей хмари, виявлення принтера та віддаленого друку." #, c-format, boost-format msgid "Error: %s" msgstr "Помилка: %s" msgid "Show details" msgstr "Показати подробиці" # AI Translated msgid "Hide details" msgstr "Сховати подробиці" msgid "Version to install:" msgstr "Версія для встановлення:" msgid "Download and Install" msgstr "Завантажити і встановити" msgid "A new version of the Bambu Network Plug-in is available." msgstr "Доступна нова версія мережевого плагіна Bambu." #, c-format, boost-format msgid "Current version: %s" msgstr "Поточна версія: %s" msgid "Update to version:" msgstr "Оновити до версії:" msgid "Don't Ask Again" msgstr "Не запитувати знову" msgid "Update Now" msgstr "Оновити зараз" msgid "(Latest)" msgstr "(Останній)" # AI Translated msgid "(installed)" msgstr "(встановлено)" msgid "The Bambu Network Plug-in has been installed successfully." msgstr "Мережевий плагін Bambu встановлено успішно." msgid "A restart is required to load the new plug-in. Would you like to restart now?" msgstr "Для завантаження нового плагіна потрібен перезапуск. Бажаєте перезапустити зараз?" msgid "Restart Now" msgstr "Перезапустити зараз" msgid "NO RAMMING AT ALL" msgstr "ВЗАГАЛІ БЕЗ УТРАМБУВАННЯ" msgid "s" msgstr "c" msgid "Volumetric speed" msgstr "Обʼємна швидкість" msgid "Step file import parameters" msgstr "Параметри імпорту STEP-файлу" # AI Translated msgid "Smaller linear and angular deflections result in higher-quality transformations but increase the processing time." msgstr "Менші лінійні та кутові відхилення дають перетворення вищої якості, але збільшують час обробки." msgid "Linear Deflection" msgstr "Лінійне відхилення" msgid "Please input a valid value (0.001 < linear deflection < 0.1)" msgstr "Будь ласка, введіть допустиме значення (0.001 < лінійне відхилення < 0.1)" msgid "Angle Deflection" msgstr "Відхилення кута" msgid "Please input a valid value (0.01 < angle deflection < 1.0)" msgstr "Будь ласка, введіть допустиме значення (0.01 < відхилення кута < 1.0)" msgid "Split compound and compsolid into multiple objects" msgstr "Розділити зʼєднання та складний обʼєкт не декілька обʼєктів" msgid "Number of triangular facets" msgstr "Кількість трикутних граней" msgid "Calculating, please wait..." msgstr "Розрахунок, будь ласка, зачекайте…" msgid "Save these settings as default" msgstr "Зберегти ці налаштування як типові" msgid "If enabled, the values above are stored as the defaults used for future STEP imports (and shown in Preferences)." msgstr "Якщо дозволено, значення вище зберігатимуться як типові для майбутнього імпортування в STEP (і відображатиметься в Налаштуваннях)." msgid "PresetBundle" msgstr "PresetBundle" msgid "Bundle folder does not exist." msgstr "Тека набору не існує." msgid "Failed to open folder." msgstr "Не вдалося відкрити теку." msgid "Delete selected bundle from folder and all presets loaded from it?" msgstr "Видалити вибраний набір з теки і всі пресети завантажені з нього?" msgid "Delete Bundle" msgstr "Видалити набір" msgid "Failed to remove bundle." msgstr "Не вдалося вилучити набір." msgid "Remove Bundle" msgstr "Вилучити набір" msgid "Unsubscribe bundle?" msgstr "Відписатися від набору?" msgid "UnsubscribeBundle" msgstr "UnsubscribeBundle" msgid "Failed to unsubscribe bundle." msgstr "Не вдалося відписатися від набору." msgid "Unsubscribe Bundle" msgstr "Відписатися від набору" msgid "ExportPresetBundle" msgstr "ExportPresetBundle" msgid "Save preset bundle" msgstr "Зберегти набір пресету" # AI Translated msgid "Performing desktop integration failed - boost::filesystem::canonical did not return appimage path." msgstr "Не вдалося виконати інтеграцію з робочим столом - boost::filesystem::canonical не повернув шлях до appimage." # AI Translated msgid "Performing desktop integration failed - Could not find executable." msgstr "Не вдалося виконати інтеграцію з робочим столом - не вдалося знайти виконуваний файл." # AI Translated msgid "Performing desktop integration failed because the application directory was not found." msgstr "Не вдалося виконати інтеграцію з робочим столом, оскільки не знайдено каталог застосунку." # AI Translated msgid "Performing desktop integration failed - could not create Gcodeviewer desktop file. OrcaSlicer desktop file was probably created successfully." msgstr "Не вдалося виконати інтеграцію з робочим столом - не вдалося створити файл робочого столу Gcodeviewer. Файл робочого столу OrcaSlicer, імовірно, створено успішно." # AI Translated msgid "Performing downloader desktop integration failed - boost::filesystem::canonical did not return appimage path." msgstr "Не вдалося виконати інтеграцію завантажувача з робочим столом - boost::filesystem::canonical не повернув шлях до appimage." # AI Translated msgid "Performing downloader desktop integration failed - Could not find executable." msgstr "Не вдалося виконати інтеграцію завантажувача з робочим столом - не вдалося знайти виконуваний файл." # AI Translated msgid "Performing downloader desktop integration failed because the application directory was not found." msgstr "Не вдалося виконати інтеграцію завантажувача з робочим столом, оскільки не знайдено каталог застосунку." msgid "Desktop Integration" msgstr "Інтеграція зі стільницею" # AI Translated msgid "" "Desktop Integration sets this binary to be searchable by the system.\n" "\n" "Press \"Perform\" to proceed." msgstr "" "Інтеграція з робочим столом робить цей виконуваний файл доступним для пошуку системою.\n" "\n" "Натисніть \"Виконати\", щоб продовжити." msgid "The download has failed" msgstr "Завантаження невдале" #. TRN %1% = file path #, boost-format msgid "Can't create file at %1%" msgstr "Неможливо створити файл %1%" msgid "Archive preview" msgstr "Перегляд архіву" msgid "Open File" msgstr "Відкрити файл" # AI Translated msgid "AMS Dryness Control" msgstr "Керування сушінням AMS" # AI Translated msgid "Filament Drying Settings" msgstr "Налаштування сушіння філаменту" # AI Translated msgid "Stopping" msgstr "Зупинення" # AI Translated msgid "Unable to dry temporarily due to ..." msgstr "Тимчасово неможливо сушити через ..." # AI Translated msgid "Drying Error" msgstr "Помилка сушіння" # AI Translated msgid "Please check the Assistant for troubleshooting" msgstr "Зверніться до Помічника для усунення несправностей" # AI Translated msgid "Please remove and store the filament (as shown)." msgstr "Вийміть і покладіть філамент на зберігання (як показано)." # AI Translated msgid "The AMS can rotate the filament which is properly stored, providing better drying results." msgstr "AMS може обертати правильно покладений на зберігання філамент, забезпечуючи кращі результати сушіння." # AI Translated msgid "Rotate spool when drying" msgstr "Обертати котушку під час сушіння" # AI Translated msgctxt "amsdrying" msgid "Back" msgstr "Назад" # AI Translated msgid "Drying-Heating" msgstr "Сушіння — нагрівання" # AI Translated msgid "Drying-Dehumidifying" msgstr "Сушіння — осушення" # AI Translated msgid " maximum drying temperature is " msgstr " максимальна температура сушіння — " # AI Translated msgid " minimum drying temperature is " msgstr " мінімальна температура сушіння — " # AI Translated msgid "This filament may not be completely dried." msgstr "Цей філамент може висохнути не повністю." # AI Translated msgid "This AMS is currently printing. To ensure print quality, the drying temperature cannot exceed the recommended drying temperature." msgstr "Цей AMS зараз друкує. Щоб забезпечити якість друку, температура сушіння не може перевищувати рекомендовану температуру сушіння." # AI Translated msgid "The temperature shall not exceed the filament's heat distortion temperature" msgstr "Температура не повинна перевищувати температуру теплового викривлення філаменту" # AI Translated msgid "Minimum time value cannot be less than 1." msgstr "Мінімальне значення часу не може бути меншим за 1." # AI Translated msgid "Maximum time value cannot be greater than 24." msgstr "Максимальне значення часу не може бути більшим за 24." # AI Translated msgid "Insufficient power" msgstr "Недостатньо живлення" # AI Translated msgid " Too many AMS drying simultaneously. Please plug in the power or stop other drying processes before starting." msgstr " Забагато AMS сушать одночасно. Підключіть живлення або зупиніть інші процеси сушіння перед початком." # AI Translated msgid "AMS is busy" msgstr "AMS зайнятий" # AI Translated msgid " AMS is calibrating | reading RFID | loading/unloading material, please wait." msgstr " AMS калібрується | зчитує RFID | завантажує чи вивантажує матеріал, зачекайте." # AI Translated msgid "Filament in AMS outlet" msgstr "Філамент у виході AMS" # AI Translated msgid " The high drying temperature may cause AMS blockage, please unload first." msgstr " Висока температура сушіння може спричинити блокування AMS, спершу вивантажте філамент." # AI Translated msgid "Initiating AMS drying" msgstr "Запуск сушіння AMS" # AI Translated msgid "Not supported in 2D mode" msgstr "Не підтримується у 2D-режимі" # AI Translated msgid "Task in progress" msgstr "Виконується завдання" # AI Translated msgid " The AMS might be in use during Task." msgstr " AMS може використовуватися під час завдання." # AI Translated msgid " Firmware update in progress, please wait..." msgstr " Триває оновлення прошивки, зачекайте..." # AI Translated msgid " Please plug in the power and then use the drying function." msgstr " Підключіть живлення, а потім скористайтеся функцією сушіння." # AI Translated msgid " The high drying temperature may cause AMS blockage. Please unload the filament manually before proceeding." msgstr " Висока температура сушіння може спричинити блокування AMS. Вивантажте філамент вручну, перш ніж продовжити." # AI Translated msgid "System is busy" msgstr "Система зайнята" # AI Translated msgid " Initiating other drying processes, please wait a few seconds..." msgstr " Запускаються інші процеси сушіння, зачекайте кілька секунд..." # AI Translated msgid "For better drying results, remove the filament and allow it to rotate." msgstr "Для кращих результатів сушіння вийміть філамент і дайте йому обертатися." # AI Translated msgid "The AMS will automatically rotate the stored filament slots to enhance the drying performance." msgstr "AMS автоматично обертатиме слоти зі збереженим філаментом, щоб покращити результати сушіння." # AI Translated msgid "Alternatively, you can dry the filament without removing it." msgstr "Крім того, ви можете сушити філамент, не виймаючи його." # AI Translated msgid "Unknown filaments will be treated as PLA." msgstr "Невідомі філаменти оброблятимуться як PLA." # AI Translated msgid "Please store the filament marked with an exclamation mark." msgstr "Покладіть на зберігання філамент, позначений знаком оклику." # AI Translated msgid "Filament left in the feeder during drying may soften because the drying temperature exceeds the softening point of materials like PLA and TPU." msgstr "Філамент, залишений у подавачі під час сушіння, може розмʼякнути, оскільки температура сушіння перевищує точку розмʼякшення таких матеріалів, як PLA і TPU." # AI Translated msgid "Starting: Checking adapter connection" msgstr "Запуск: перевірка підключення адаптера" # AI Translated msgid "Starting: Checking filament status" msgstr "Запуск: перевірка стану філаменту" # AI Translated msgid "Starting: Checking drying presets" msgstr "Запуск: перевірка пресетів сушіння" # AI Translated msgid "Starting: Checking filament location" msgstr "Запуск: перевірка розташування філаменту" # AI Translated msgid "Starting: Checking air intake" msgstr "Запуск: перевірка впуску повітря" # AI Translated msgid "Starting: Checking air vent" msgstr "Запуск: перевірка вентиляційного отвору" msgid "The filament may not be compatible with the current machine settings. Generic filament presets will be used." msgstr "Цей філамент може бути несумісним з поточними налаштуваннями машини. Будуть використані пресети Generic філамента" msgid "The filament model is unknown. Still using the previous filament preset." msgstr "Модель філамента невідома. Продовжуємо використовувати попередні пресети філамента." msgid "The filament model is unknown. Generic filament presets will be used." msgstr "Модель філамента невідома. Будуть використані пресети Generic філамента" msgid "The filament may not be compatible with the current machine settings. A random filament preset will be used." msgstr "Цей філамент може бути несумісним з поточними налаштуваннями машини. Буде використаний випадковий пресет філамента" msgid "The filament model is unknown. A random filament preset will be used." msgstr "Модель філамента невідома. Буде використаний випадковий пресет філамента" #: resources/data/hints.ini: [hint:Precise wall] msgid "" "Precise wall\n" "Did you know that turning on precise wall can improve precision and layer consistency?" msgstr "" "Точна стінка\n" "Чи знаєте ви, що ввімкнення точної стінки може покращити точність і узгодженість шару?" #: resources/data/hints.ini: [hint:Sandwich mode] msgid "" "Sandwich mode\n" "Did you know that you can use sandwich mode (inner-outer-inner) to improve precision and layer consistency if your model doesn't have very steep overhangs?" msgstr "" "Сендвіч режим\n" "Чи знаєте ви, що можна використовувати сендвіч-режим (внутрішній-зовнішній-внутрішній), щоб покращити точність і узгодженість шарів, якщо ваша модель не має дуже крутих нависань?" #: resources/data/hints.ini: [hint:Chamber temperature] msgid "" "Chamber temperature\n" "Did you know that OrcaSlicer supports chamber temperature?" msgstr "" "Температура камери\n" "Чи знаєте ви, що OrcaSlicer вміє керувати температурою камери?" #: resources/data/hints.ini: [hint:Calibration] msgid "" "Calibration\n" "Did you know that calibrating your printer can do wonders? Check out our beloved calibration solution in OrcaSlicer." msgstr "" "Калібрування\n" "Чи знаєте ви, що калібрування принтера може творити чудеса? Перегляньте наш улюблений набір тестів для калібрування в OrcaSlicer." #: resources/data/hints.ini: [hint:Auxiliary fan] msgid "" "Auxiliary fan\n" "Did you know that OrcaSlicer supports Auxiliary part cooling fan?" msgstr "" "Допоміжний вентилятор\n" "Чи знаєте ви, що OrcaSlicer підтримує вентилятор охолодження допоміжної частини?" #: resources/data/hints.ini: [hint:Air filtration] msgid "" "Air filtration/Exhaust Fan\n" "Did you know that OrcaSlicer can support Air filtration/Exhaust Fan?" msgstr "" "Фільтрація повітря/витяжний вентилятор\n" "Чи знаєте ви, що OrcaSlicer підтримує фільтрацію повітря/витяжний вентилятор?" #: resources/data/hints.ini: [hint:G-code window] msgid "" "G-code window\n" "You can turn on/off the G-code window by pressing the C key." msgstr "" "Вікно G-коду\n" "Ви можете вмикати/вимикати вікно G-коду, натискаючи клавішу C." #: resources/data/hints.ini: [hint:Switch workspaces] msgid "" "Switch workspaces\n" "You can switch between Prepare and Preview workspaces by pressing the Tab key." msgstr "" "Перемикання робочих областей\n" "Ви можете переключатися між робочими областями Підготовка і Перегляд, натискаючи клавішу Tab." #: resources/data/hints.ini: [hint:How to use keyboard shortcuts] msgid "" "How to use keyboard shortcuts\n" "Did you know that Orca Slicer offers a wide range of keyboard shortcuts and 3D scene operations?" msgstr "" "Як використовувати комбінації клавіш\n" "Чи знаєте ви, що Orca Slicer пропонує широкий спектр комбінацій клавіш для роботи з 3D-сценами?" # AI Translated #: resources/data/hints.ini: [hint:Reverse on even] msgid "" "Reverse on even\n" "Did you know that Reverse on even feature can significantly improve the surface quality of your overhangs? However, it can cause wall inconsistencies so use carefully!" msgstr "" "Реверс на парних\n" "Чи знали ви, що функція Реверс на парних може значно покращити якість поверхні ваших нависань? Однак вона може спричинити неоднорідність стінок, тож використовуйте її обережно!" #: resources/data/hints.ini: [hint:Cut Tool] msgid "" "Cut Tool\n" "Did you know that you can cut a model at any angle and position with the cutting tool?" msgstr "" "Інструмент вирізування\n" "Чи знаєте ви, що можна вирізати модель під будь-яким кутом і в будь-якому положенніза допомогою різального інструмента?" #: resources/data/hints.ini: [hint:Fix Model] msgid "" "Fix Model\n" "Did you know that you can fix a corrupted 3D model to avoid a lot of slicing problems on the Windows system?" msgstr "" "Виправлення моделі\n" "Чи знаєте ви, що ви можете виправити пошкоджену 3D-модель, щоб уникнути багатьох проблем з нарізанням (slicing) на операційній системі Windows?" #: resources/data/hints.ini: [hint:Timelapse] msgid "" "Timelapse\n" "Did you know that you can generate a timelapse video during each print?" msgstr "" "Таймлапс\n" "Ви знали, що можна генерувати відео під час кожного друку?" #: resources/data/hints.ini: [hint:Auto-Arrange] msgid "" "Auto-Arrange\n" "Did you know that you can auto-arrange all the objects in your project?" msgstr "" "Автоматичне впорядкування\n" "Чи знаєте ви, що можна автоматично розташувати всі обʼєкти в проєкті?" #: resources/data/hints.ini: [hint:Auto-Orient] msgid "" "Auto-Orient\n" "Did you know that you can rotate objects to an optimal orientation for printing with a simple click?" msgstr "" "Автоорієнтація\n" "Чи знаєте ви, що можна повертати обʼєкти в оптимальну орієнтацію для друку простим клацанням?" #: resources/data/hints.ini: [hint:Lay on Face] msgid "" "Lay on Face\n" "Did you know that you can quickly orient a model so that one of its faces sits on the print bed? Select the \"Place on face\" function or press the F key." msgstr "" "Покласти на обличчя\n" "Чи знаєте ви, що ви можете швидко зорієнтувати модель так, щоб одна з її граней лежала на столі? Виберіть функцію «Розмістити на межі» або натисніть клавішу < b > F ." #: resources/data/hints.ini: [hint:Object List] msgid "" "Object List\n" "Did you know that you can view all objects/parts in a list and change settings for each object/part?" msgstr "" "Список обʼєктів\n" "Чи знаєте ви, що можна переглядати всі обʼєкти/деталі у списку та змінювати Параметри для кожного обʼєкта/деталі?" #: resources/data/hints.ini: [hint:Search Functionality] msgid "" "Search Functionality\n" "Did you know that you use the Search tool to quickly find a specific Orca Slicer setting?" msgstr "" "Функція пошуку\n" "Чи знаєте ви, що для швидкого пошуку певних налаштувань Orca Slicer ви можете скористатися інструментом \"Пошук\"?" #: resources/data/hints.ini: [hint:Simplify Model] msgid "" "Simplify Model\n" "Did you know that you can reduce the number of triangles in a mesh using the Simplify mesh feature? Right-click the model and select Simplify model." msgstr "" "Спростити модель\n" "Чи знаєте ви, що можна зменшити кількість трикутників у сітці за допомогою функції Спростити сітку? Клацніть правою кнопкою миші на моделі і виберіть Спростити модель." #: resources/data/hints.ini: [hint:Slicing Parameter Table] msgid "" "Slicing Parameter Table\n" "Did you know that you can view all objects/parts on a table and change settings for each object/part?" msgstr "" "Таблиця параметрів зрізу\n" "Чи знаєте ви, що можна переглядати всі обʼєкти/деталі в таблиці та змінювати налаштування для кожного обʼєкта/деталі?" #: resources/data/hints.ini: [hint:Split to Objects/Parts] msgid "" "Split to Objects/Parts\n" "Did you know that you can split a big object into small ones for easy colorizing or printing?" msgstr "" "Розділити на обʼєкти/деталі\n" "Чи знаєте ви, що ви можете розділити великий обʼєкт на маленькі для легкоїзабарвлення чи друку?" #: resources/data/hints.ini: [hint:Subtract a Part] msgid "" "Subtract a Part\n" "Did you know that you can subtract one mesh from another using the Negative part modifier? That way you can, for example, create easily resizable holes directly in Orca Slicer." msgstr "" "Відняти частину\n" "Чи знаєте ви, що можна віднімати одну сіть від іншої за допомогою модифікатора \"Відʼємна частина\"? Таким чином, ви можете, наприклад, створювати отвори зі змінним розміром безпосередньо в Orca Slicer." #: resources/data/hints.ini: [hint:STEP] msgid "" "STEP\n" "Did you know that you can improve your print quality by slicing a STEP file instead of an STL?\n" "Orca Slicer supports slicing STEP files, providing smoother results than a lower resolution STL. Give it a try!" msgstr "" "STEP\n" "Чи знаєте ви, що ви можете покращити якість друку, нарізавши файл STEPзамість STL?\n" "Orca Slicer підтримує нарізання файлів STEP, забезпечуючи більш плавнірезультати порівняно з нижчою роздільною здатністю STL. Спробуй!" #: resources/data/hints.ini: [hint:Z seam location] msgid "" "Z seam location\n" "Did you know that you can customize the location of the Z seam, and even paint it on your print, to have it in a less visible location? This improves the overall look of your model. Check it out!" msgstr "" "Місце зʼєднання Z-шва\n" "Чи знали ви, що ви можете налаштовувати розташування Z-шва, і навіть розфарбовувати його на друці, щоб зробити його менш видимим? Це покращує загальний вигляд вашої моделі. Перевірте це!" #: resources/data/hints.ini: [hint:Fine-tuning for flow rate] msgid "" "Fine-tuning for flow rate\n" "Did you know that flow rate can be fine-tuned for even better-looking prints? Depending on the material, you can improve the overall finish of the printed model by doing some fine-tuning." msgstr "" "Тонке налаштування витрати\n" "Чи знаєте ви, що швидкість потоку може бути точно налаштована для навіть більшекрасивих відбитків? Залежно від матеріалу можна покращити загальне оздобленнядрукарської моделі, виконавши деяке тонке налаштування." #: resources/data/hints.ini: [hint:Split your prints into plates] msgid "" "Split your prints into plates\n" "Did you know that you can split a model that has a lot of parts into individual plates ready to print? This will simplify the process of keeping track of all the parts." msgstr "" "Розбийте відбитки на пластини\n" "Чи знаєте ви, що можна розділити модель з великою кількістю деталей на окремі столи, готові до друку? Це спростить процес відстеження всіхдеталей." #: resources/data/hints.ini: [hint:Speed up your print with Adaptive Layer #: Height] msgid "" "Speed up your print with Adaptive Layer Height\n" "Did you know that you can print a model even faster by using the Adaptive Layer Height option? Check it out!" msgstr "" "Прискорення друку за допомогою функції «Адаптивна висота шару»\n" "Чи знаєте ви, що можна друкувати модель ще швидше за допомогою параметра «Адаптивна висота шару»? Подивися!" #: resources/data/hints.ini: [hint:Support painting] msgid "" "Support painting\n" "Did you know that you can paint the location of your supports? This feature makes it easy to place the support material only on the sections of the model that actually need it." msgstr "" "Опорне забарвлення\n" "Ти знав, що можеш намалювати розташування своїх опор? Ця функція спрощуєрозміщення матеріалу опори тільки на тих перерізах моделі, які в цьомупотребують." # AI Translated #: resources/data/hints.ini: [hint:Different types of supports] msgid "" "Different types of supports\n" "Did you know that you can choose from multiple types of supports? Tree supports work great for organic models while saving filament and improving print speed. Check them out!" msgstr "" "Різні типи підтримок\n" "Чи знаєте ви, що можна вибрати один із кількох типів підтримок? Органічні підтримки чудово працюють для органічних моделей, заощаджуючи філамент і підвищуючи швидкість друку. Спробуйте!" # AI Translated #: resources/data/hints.ini: [hint:Printing Silk Filament] msgid "" "Printing Silk Filament\n" "Did you know that Silk filament needs special consideration to print successfully? A higher temperature and lower speed are always recommended for the best results." msgstr "" "Друк шовковим філаментом\n" "Чи знаєте ви, що шовковий філамент потребує особливої уваги, щоб надрукувати його успішно? Для досягнення найкращих результатів завжди рекомендується вища температура та нижча швидкість." #: resources/data/hints.ini: [hint:Brim for better adhesion] msgid "" "Brim for better adhesion\n" "Did you know that when printed models have a small contact interface with the printing surface, it's recommended to use a brim?" msgstr "" "Кайма для кращого прилипання\n" "Чи знаєте ви, що при друці моделей які мають невелику площу контакту з поверхнею друку, рекомендується використовувати кайму?" # AI Translated #: resources/data/hints.ini: [hint:Set parameters for multiple objects] msgid "" "Set parameters for multiple objects\n" "Did you know that you can set slicing parameters for all selected objects at once?" msgstr "" "Встановлення параметрів для кількох обʼєктів\n" "Чи знаєте ви, що можна встановити параметри нарізки для всіх вибраних обʼєктів одночасно?" #: resources/data/hints.ini: [hint:Stack objects] msgid "" "Stack objects\n" "Did you know that you can stack objects as a whole one?" msgstr "" "Стек об’єктів\n" "Чи знаєте ви, що можна складати об’єкти як одне ціле?" #: resources/data/hints.ini: [hint:Flush into support/objects/infill] msgid "" "Flush into support/objects/infill\n" "Did you know that you can reduce wasted filament by flushing it into support/objects/infill during filament changes?" msgstr "" "Промивати в підтримки/обʼєкти/заповнення\n" "Чи знаєте ви, що ви можете зберегти витрачений філамент, промиваючи його в підтримки/обʼєкти/заповнення під час зміни філаменту?" #: resources/data/hints.ini: [hint:Improve strength] msgid "" "Improve strength\n" "Did you know that you can use more wall loops and higher sparse infill density to improve the strength of the model?" msgstr "" "Підвищення міцності\n" "Чи знаєте ви, що для підвищення міцності моделі можна використовувати більшепериметрів та вищу щільність заповнення?" #: resources/data/hints.ini: [hint:When do you need to print with the printer #: door opened] msgid "" "When do you need to print with the printer door opened?\n" "Did you know that opening the printer door can reduce the probability of extruder/hotend clogging when printing lower temperature filament with a higher enclosure temperature? There is more info about this in the Wiki." msgstr "" "Коли потрібно друкувати з відкритими дверцятами принтера\n" "Чи знаєте ви, що відкриття дверцят принтера може знизити ймовірність засмічення екструдера/гарячого блока при друку низькотемпературного філаменту при вищій температурі усередині корпусу? Більше інформації знаходиться в Вікі." # AI Translated #: resources/data/hints.ini: [hint:Avoid warping] msgid "" "Avoid warping\n" "Did you know that when printing materials that are prone to warping such as ABS, appropriately increasing the heatbed temperature can reduce the probability of warping?" msgstr "" "Уникнення деформації\n" "Чи знаєте ви, що при друку матеріалами, схильними до деформації, такими як ABS, відповідне підвищення температури столу може зменшити ймовірність деформації?" # AI Translated #~ msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer." #~ msgstr "Нативний перегляд у Wayland потребує відеоприймача GStreamer GTK. Встановіть плагін gtksink для GStreamer, а потім перезапустіть OrcaSlicer." # AI Translated #~ msgid "Failed to initialize the native Wayland GStreamer video sink. Please check your GStreamer GTK plugin installation." #~ msgstr "Не вдалося ініціалізувати нативний відеоприймач GStreamer для Wayland. Перевірте встановлення плагіна GStreamer GTK." #~ msgid "Windows Media Player is required for this task! Do you want to enable 'Windows Media Player' for your operation system?" #~ msgstr "Для виконання цього завдання потрібен Windows Media Player! Бажаєте увімкнути 'Windows Media Player' для вашої операційної системи?" #~ msgid "BambuSource has not correctly been registered for media playing! Press Yes to re-register it. You will be promoted twice" #~ msgstr "BambuSource не було правильно зареєстровано для відтворення медіафайлів! Натисніть \"Так\", щоб зареєструвати його повторно. Вас буде сповіщено двічі" # AI Translated #~ msgid "Missing BambuSource component registered for media playing! Please re-install OrcaSlicer or seek community help." #~ msgstr "Відсутній компонент BambuSource, зареєстрований для відтворення медіа! Перевстановіть OrcaSlicer або зверніться по допомогу до спільноти." #~ msgid "Using a BambuSource from a different install, video play may not work correctly! Press Yes to fix it." #~ msgstr "Використовується BambuSource з іншої інсталяції, відтворення відео може працювати неправильно! Натисніть \"Так\", щоб виправити це." #~ msgid "Your system is missing H.264 codecs for GStreamer, which are required to play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-libav packages, then restart Orca Slicer?)" #~ msgstr "Вашій системі бракує кодеків H.264 для GStreamer, які необхідні для відтворення відео. (Спробуйте встановити пакети gstreamer1.0-plugins-bad або gstreamer1.0-libav, а потім перезапустіть Orca Slicer?)" # AI Translated #~ msgid "N" #~ msgstr "N" #~ msgid "g" #~ msgstr "г" #~ msgid "Fila Saving" #~ msgstr "Збереження філаменту" #~ msgid "" #~ "Layer height is too small.\n" #~ "It will set to min_layer_height\n" #~ msgstr "" #~ "Висота шару занадто мала.\n" #~ "Буде встановлено значення min_layer_height\n" #~ msgid "Layer height exceeds the limit in Printer Settings -> Extruder -> Layer height limits, this may cause printing quality issues." #~ msgstr "Висота шару перевищує ліміт у Налаштуваннях принтера -> Екструдер -> Ліміти висоти шару, це може призвести до проблем з якістю друку." #~ msgid "Adjust to the set range automatically?\n" #~ msgstr "Автоматично налаштувати на встановлений діапазон?\n" #~ msgid "Head diameter" #~ msgstr "Діаметр голови" #~ msgid "Print order within a single layer." #~ msgstr "Друк замовлення в один шар" #~ msgid "Bottom" #~ msgstr "Низ" #~ msgid "Front" #~ msgstr "Перед" #~ msgid "Rear" #~ msgstr "Зад" #~ msgid "Enter" #~ msgstr "Ввести" #~ msgid "Esc" #~ msgstr "Esc" #~ msgid "Del" #~ msgstr "Видалити" #~ msgid "Backspace" #~ msgstr "Назад" #~ msgid "Arrow Up" #~ msgstr "Стрілка вгору" #~ msgid "Arrow Down" #~ msgstr "Стрілка вниз" #~ msgid "Arrow Left" #~ msgstr "Стрілка вліво" #~ msgid "Arrow Right" #~ msgstr "Стрілка праворуч" #~ msgid "End" #~ msgstr "Кінець" #~ msgid "Hotend" #~ msgstr "Хотенд" #~ msgid "Skip for Now" #~ msgstr "Пропустити поки що" #~ msgid "Remind Later" #~ msgstr "Нагадати пізніше" #~ msgid "Skip Version" #~ msgstr "Пропустити версію" #~ msgid "Restart Later" #~ msgstr "Перезапустити пізніше" #~ msgid "Select filament that installed to the left nozzle" #~ msgstr "Вибрати філамент, що встановлений на ліве сопло" #~ msgid "Select filament that installed to the right nozzle" #~ msgstr "Вибрати філамент, що встановлений на праве сопло" #~ msgid "Select Filament && Hotends" #~ msgstr "Вибрати філамент і хотенди" #~ msgid "Note: Only filament-loaded slots can be selected." #~ msgstr "Примітка: Можна вибрати лише слоти із загруженим філаментом." # TODO: Review, changed by lang refactor. PR 14254 #~ msgid "Click OK to update the Network plug-in the next time Orca Slicer launches." #~ msgstr "Натисніть OK, щоб оновити мережевий плагін під час наступного запуску Orca Slicer." # TODO: Review, changed by lang refactor. PR 14254 #, boost-format #~ msgid "Failed to calculate line width of %1%. Cannot get value of “%2%”." #~ msgstr "Не вдалося обчислити ширину лінії %1%. Неможливо отримати значення \"%2%\" " #~ msgid "Invalid spacing supplied to Flow::with_spacing(), check your layer height and extrusion width." #~ msgstr "Неправильний інтервал, переданий до Flow::with_spacing(), перевірте висоту шару та ширину екструзії" #~ msgid "°C" #~ msgstr "℃" #~ msgctxt "Sync_Nozzle_AMS" #~ msgid "Cancel" #~ msgstr "Скасувати" #~ msgid "Print" #~ msgstr "Друк" #~ msgid "in" #~ msgstr "в" #~ msgid "Object coordinates" #~ msgstr "Координати обʼєкта" #~ msgid "World coordinates" #~ msgstr "Глобальні координати" #~ msgid "Rotate (absolute)" #~ msgstr "Обертання (абсолютне)" #~ msgid "Part coordinates" #~ msgstr "Координати частини" #~ msgid "Enable adaptive pressure advance for overhangs (beta)" #~ msgstr "Увімкнути адаптивне випередження тиску для нависань (бета)" #~ msgid "Pressure advance for bridges" #~ msgstr "Випередження тиску для мостів" #~ msgid "" #~ "Pressure advance value for bridges. Set to 0 to disable.\n" #~ "\n" #~ "A lower PA value when printing bridges helps reduce the appearance of slight under extrusion immediately after bridges. This is caused by the pressure drop in the nozzle when printing in the air and a lower PA helps counteract this." #~ msgstr "" #~ "Значення випередження тиску для мостів. Встановіть 0, щоб вимкнути.\n" #~ "\n" #~ "Нижче значення випередження тиску при друкуванні мостів допомагає зменшити прояви незначної недоекструзії одразу після друку мостів. Це спричинено падінням тиску в соплі під час друку в повітрі, і зменшене значення випередження тиску допомагає це компенсувати." #~ msgid "View control settings" #~ msgstr "Перегляд параметрів керування" #~ msgid "Rotate view" #~ msgstr "Повернути вигляд" #~ msgid "Pan view" #~ msgstr "Панорамний вигляд" #~ msgid "Zoom view" #~ msgstr "Перегляд масштабу" # TODO: Review, changed by lang refactor. PR 14254 #~ msgid "Reverse scroll direction while zooming" #~ msgstr "Колісок миші реверсує при масштабуванні" #~ msgid "Enable network plug-in" #~ msgstr "Увімкнути мережевий плагін" #~ msgid "Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n" #~ msgstr "Увімкнути адаптивний PA для нависань, а також у випадках зміни подачі матеріалу в межах однієї деталі. Це експериментальний параметр, оскільки, якщо профіль PA налаштований неточно, це може спричинити проблеми з рівномірністю зовнішніх поверхонь до і після нависань.\n" #~ msgid "Perform" #~ msgstr "Виконати" #~ msgid "Reset Rotation" #~ msgstr "Скинути орієнтацію" #~ msgid "Top Solid Layers" #~ msgstr "Верхніх Суцільних Шарів" #~ msgid "Add modifier" #~ msgstr "Додати модифікатор" #~ msgid "Bed Type" #~ msgstr "Тип столу" #~ msgid "Last Step" #~ msgstr "Останній крок" #~ msgid "Dynamic flow Calibration" #~ msgstr "Калібрування динамічного потоку" #~ msgid "Print with filaments mounted on the back of the chassis" #~ msgstr "Друк із нитками, встановленими на задній частині корпусу" #~ msgid "Load Filament" #~ msgstr "Завантажте філамент" #~ msgid "Filament Changes" #~ msgstr "Зміна філаменту" #~ msgid "Mirror Object" #~ msgstr "Дзеркальний обʼєкт" #~ msgid "Delete all" #~ msgstr "Видалити все" #~ msgid "Select all" #~ msgstr "Вибрати все" #~ msgid "Deselect all" #~ msgstr "Прибрати виділення з усього" #~ msgid "Filament Settings" #~ msgstr "Налаштування Філаменту" #~ msgid "Detail." #~ msgstr "Деталь." #~ msgid "Support painting" #~ msgstr "Підтримка малювання" #~ msgid "Color painting" #~ msgstr "Розфарбовування кольорами" #~ msgid "Same as Global Bed Type" #~ msgstr "Те ж, що й глобальний тип столу" #~ msgid "Undef" #~ msgstr "Невизначено" #~ msgid "Undefine" #~ msgstr "Скасувати визначення" #~ msgid "Number of top interface layers." #~ msgstr "Кількість верхніх шарів підтримки" #~ msgid "Bed Leveling" #~ msgstr "Вирівнювання столу" #~ msgid "part selection" #~ msgstr "вибір частини" #~ msgid "°" #~ msgstr "°" #~ msgid "" #~ "The Wipe option is not available when using the Firmware Retraction mode.\n" #~ "\n" #~ "Shall I disable it in order to enable Firmware Retraction?" #~ msgstr "" #~ "Опція Wipe недоступна під час використання режиму Firmware Retraction.\n" #~ "\n" #~ "Чи я повинен відключити його, щоб включити Firmware Retraction?" #~ msgid "\"G92 E0\" was found in before_layer_gcode, which is incompatible with absolute extruder addressing." #~ msgstr "У before_layer_gcode знайдено \"G92 E0\", що несумісне з абсолютною адресацією екструдера." #~ msgid "\"G92 E0\" was found in layer_gcode, which is incompatible with absolute extruder addressing." #~ msgstr "У layer_gcode знайдено \"G92 E0\", що несумісне з абсолютною адресацією екструдера." #, no-c-format, no-boost-format #~ msgid "Bridging angle override. If left to zero, the bridging angle will be calculated automatically. Otherwise the provided angle will be used for external bridges. Use 180° for zero angle." #~ msgstr "Перевизначення кута моста. Якщо залишити значення рівним нулю, кут моста обчислюватиметься автоматично. Інакше наданий кут використовуйте для зовнішніх мостів. Використовуйте 180 ° для нульового кута." #~ msgid "" #~ "Internal bridging angle override. If left to zero, the bridging angle will be calculated automatically. Otherwise the provided angle will be used for internal bridges. Use 180° for zero angle.\n" #~ "\n" #~ "It is recommended to leave it at 0 unless there is a specific model need not to." #~ msgstr "" #~ "Перевизначення кута мостів. Якщо залишити значення рівним нулю, кут мостів буде розраховано автоматично. В іншому випадку для внутрішніх мостів буде використано заданий кут. Використовуйте 180° для нульового кута.\n" #~ "\n" #~ "Рекомендується залишати його на 0, якщо тільки це не є необхідним для конкретної моделі." #~ msgid "" #~ "Controls the density (spacing) of internal bridge lines. 100% means solid bridge. Default is 100%.\n" #~ "\n" #~ "Lower density internal bridges can help reduce top surface pillowing and improve internal bridge reliability as there is more space for air to circulate around the extruded bridge, improving its cooling speed.\n" #~ "\n" #~ "This option works particularly well when combined with the second internal bridge over infill option, further improving internal bridging structure before solid infill is extruded." #~ msgstr "" #~ "Керує щільністю (відстанню) внутрішніх ліній мостів. 100% означає суцільний міст. Значення за замовчуванням – 100%.\n" #~ "\n" #~ "Мости з меншою щільністю можуть допомогти зменшити ефект здуття верхньої поверхні та покращити надійність внутрішніх мостів, оскільки навколо екструдованого моста залишається більше простору для циркуляції повітря, що покращує його охолодження.\n" #~ "\n" #~ "Ця опція особливо ефективна в поєднанні з параметром друку другого внутрішнього моста над заповненням, що ще більше покращує внутрішню структуру мостів перед екструзією суцільного заповнення." #~ msgid "" #~ "Decrease this value slightly (for example 0.9) to reduce the amount of material for bridge, to improve sag.\n" #~ "\n" #~ "The actual bridge flow used is calculated by multiplying this value with the filament flow ratio, and if set, the object's flow ratio." #~ msgstr "" #~ "Зменште це значення трохи(наприклад 0.9) щоб зменшити кількість матеріалу для мосту для покращення провисання.\n" #~ "\n" #~ "Фактичний потік матеріалу для мосту розраховується шляхом множення цього значення на коефіцієнт потоку філамента і якщо встановлено, на коефіцієнт потоку обʼєкта." #~ msgid "" #~ "This value governs the thickness of the internal bridge layer. This is the first layer over sparse infill. Decrease this value slightly (for example 0.9) to improve surface quality over sparse infill.\n" #~ "\n" #~ "The actual internal bridge flow used is calculated by multiplying this value with the bridge flow ratio, the filament flow ratio, and if set, the object's flow ratio." #~ msgstr "" #~ "Це значення визначає товщину внутрішнього мостового шару. Це перший шар над розрідженим заповненням.\n" #~ "Зменште це значення трохи (наприклад 0.9) щоб покращити якість поверхні над розрідженим заповненням.\n" #~ "\n" #~ "Фактична подача матеріалу для внутрішнього мостового шару розраховується шляхом множення цього значення на коефіцієнт подачі для мостів, коефіцієнт подачі філаменту та, якщо встановлено, коефіцієнт подачі для обʼєкта." #, no-c-format, no-boost-format #~ msgid "" #~ "Enable this option to slow down printing in areas where perimeters may have curled upwards. For example, additional slowdown will be applied when printing overhangs on sharp corners like the front of the Benchy hull, reducing curling which compounds over multiple layers.\n" #~ "\n" #~ "It is generally recommended to have this option switched on unless your printer cooling is powerful enough or the print speed slow enough that perimeter curling does not happen. If printing with a high external perimeter speed, this parameter may introduce slight artifacts when slowing down due to the large variance in print speeds. If you notice artifacts, ensure your pressure advance is tuned correctly.\n" #~ "\n" #~ "Note: When this option is enabled, overhang perimeters are treated like overhangs, meaning the overhang speed is applied even if the overhanging perimeter is part of a bridge. For example, when the perimeters are 100% overhanging, with no wall supporting them from underneath, the 100% overhang speed will be applied." #~ msgstr "" #~ "Увімкніть цю опцію, щоб уповільнити друк у зонах, де периметри можуть загортатися вгору. \n" #~ "\n" #~ "**Наприклад, додаткове зниження швидкості застосовується при друку нависань на гострих кутах, таких як передня частина корпусу Benchy. Це допомагає зменшити загортання, яке може накопичуватися з кожним шаром.** \n" #~ "\n" #~ "**Зазвичай рекомендується залишати цю опцію увімкненою, якщо тільки ваш принтер не має достатньо потужного охолодження або швидкість друку не є настільки низькою, щоб уникнути загортання периметрів. Якщо ви друкуєте на високій швидкості зовнішніх периметрів, це налаштування може спричинити незначні артефакти через різку зміну швидкості друку. Якщо ви помітили такі артефакти, переконайтеся, що калібрування компенсації тиску (pressure advance) виконано правильно.** \n" #~ "\n" #~ "**Примітка:** Коли ця опція увімкнена, периметри нависань обробляються так само, як звичайні нависання. Це означає, що буде застосована швидкість друку для нависань, навіть якщо нависаючий периметр є частиною мосту. Наприклад, якщо периметри нависають на 100% без опори знизу, буде застосована відповідна швидкість для 100% нависань." #~ msgid "If enabled, bridges are more reliable, can bridge longer distances, but may look worse. If disabled, bridges look better but are reliable just for shorter bridged distances." #~ msgstr "Якщо ця функція увімкнена, мости більш надійні, можуть зʼєднувати великівідстань, але можуть виглядати гірше. Якщо відключити, мости виглядають краще,Але надійні лише для більш коротких мостових відстаней." #~ msgid "If enabled, thick internal bridges will be used. It's usually recommended to have this feature turned on. However, consider turning it off if you are using large nozzles." #~ msgstr "Якщо увімкнено, будуть використовуватися товсті внутрішні мости. Зазвичай рекомендується вмикати цю функцію. Однак, якщо ви використовуєте великі сопла, краще вимкнути її." #~ msgid "Filament to print internal sparse infill." #~ msgstr "Філамент для друку внутрішнього часткового заповнення." #~ msgid "Filament to print walls." #~ msgstr "Філамент для друку стінок" #~ msgid "Solid infill" #~ msgstr "Суцільне заповнення" #~ msgid "Filament to print solid infill." #~ msgstr "Філамент для друку суцільного заповнення" #~ msgid "Filament to print support base and raft. \"Default\" means no specific filament for support and current filament is used." #~ msgstr "Філамент для друку підтримок та підкладки. «За замовчуванням» означає відсутність конкретного філаменту для підтримок та використання поточного філаменту" #~ msgid "Filament to print support interface. \"Default\" means no specific filament for support interface and current filament is used." #~ msgstr "Філамент для друку підтримки. «За замовчуванням» означає відсутність конкретного філаменту для друку підтримки, і використовується поточний філамент" #~ msgid "Erase all painting" #~ msgstr "Стерти всі малюнки" #~ msgid "Reset cut" #~ msgstr "Скинути розрізання" #~ msgid "Swap pan and rotate mouse buttons" #~ msgstr "Поміняти кнопки миші для панорамування й обертання" #~ msgid "If enabled, swaps the left and right mouse buttons pan and rotate functions." #~ msgstr "Якщо ввімкнено, змінює місцями функції панорамування та обертання між лівою та правою кнопками миші." #~ msgid "Remove selected points" #~ msgstr "Видалити вибрані точки" #~ msgid "Remove all" #~ msgstr "Видалити все" #~ msgid "Auto-generate points" #~ msgstr "Автоматично згенерувати точки" #~ msgid "Add a brim ear" #~ msgstr "Додати краєчок" #~ msgid "Delete a brim ear" #~ msgstr "Видалити краєчок" #~ msgid "Adjust section view" #~ msgstr "Налаштувати вид секції" #~ msgid " invalid brim ears" #~ msgstr " Неправильні краєчки" #~ msgid "" #~ "Reverse on odd\n" #~ "Did you know that Reverse on odd feature can significantly improve the surface quality of your overhangs?" #~ msgstr "" #~ "Reverse on odd\n" #~ "Чи знали ви, що функція Реверс по непарних периметрах може значно покращити якість поверхні ваших нависань?" #~ msgid "Pen size" #~ msgstr "Розмір пера" #~ msgid "Pen shape" #~ msgstr "Форма пера" #~ msgid "Key 1~9" #~ msgstr "Клавіша 1~9" #~ msgid "Left click" #~ msgstr "Клацніть лівою кнопкою миші" #~ msgid "Right click" #~ msgstr "Клацніть правою кнопкою миші" #~ msgid "Select feature" #~ msgstr "Виберіть функцію" #~ msgid "Object/Part Setting" #~ msgstr "Налаштування обʼєкта/деталі" #~ msgid "OrcaSlicer is based on BambuStudio, PrusaSlicer, and SuperSlicer." #~ msgstr "OrcaSlicer базується на BambuStudio, PrusaSlicer та SuperSlicer." #~ msgid "BambuStudio is originally based on PrusaSlicer by PrusaResearch." #~ msgstr "BambuStudio спочатку базується на PrusaSlicer від PrusaResearch." #~ msgid "PrusaSlicer is originally based on Slic3r by Alessandro Ranellucci." #~ msgstr "PrusaSlicer спочатку базується на Slic3r від Алессандро Ранеллуччі." #~ msgid "Slic3r was created by Alessandro Ranellucci with the help of many other contributors." #~ msgstr "" #~ "Slic3r був створений Алессандро Ранеллуччі за допомогою багатьох інших\n" #~ "учасники." #~ msgid "Actual Speed: " #~ msgstr "Фактична швидкість: " #~ msgid "Mouse wheel:" #~ msgstr "Кольця миші:" #~ msgid "Pass 1" #~ msgstr "Прохід 1" #~ msgid "Flow ratio test - Pass 1" #~ msgstr "Тест коефіцієнта потоку - Прохід 1" #~ msgid "Pass 2" #~ msgstr "Прохід 2" #~ msgid "Flow ratio test - Pass 2" #~ msgstr "Тест коефіцієнта потоку - Прохід 2" #~ msgid "Orca YOLO flowratio calibration, 0.01 step" #~ msgstr "Калібрування коефіцієнта потоку Orca YOLO, крок 0.01" #~ msgid "YOLO (perfectionist version)" #~ msgstr "YOLO (версія перфекціоніста)" #~ msgid "Orca YOLO flowratio calibration, 0.005 step" #~ msgstr "Калібрування коефіцієнта потоку Orca YOLO, крок 0.005" #~ msgid "Retraction test" #~ msgstr "Тест на втягування" #~ msgid "Tutorial" #~ msgstr "Посібник" #~ msgid "Calibration help" #~ msgstr "Довідка з калібрування" #~ msgid "" #~ "Do you want to synchronize your personal data from Bambu Cloud?\n" #~ "It contains the following information:\n" #~ "1. The Process presets\n" #~ "2. The Filament presets\n" #~ "3. The Printer presets" #~ msgstr "" #~ "Ви хочете синхронізувати свої особисті дані з Bambu Cloud?\n" #~ "Він містить таку інформацію:\n" #~ "1. Передустановки процесу\n" #~ "2. Передустановки філаменту\n" #~ "3. Передустановки принтера" #~ msgid "\"Fix Model\" feature is currently only on Windows. Please repair the model on Orca Slicer(windows) or CAD softwares." #~ msgstr "" #~ "Функція \\Fix Model\\ доступна лише у Windows. Будь ласка, відремонтуйте модель \n" #~ "на Orca Slicer (Windows) або у програмах САПР." #~ msgid "This stops the transmission of data to Bambu's cloud services. Users who don't use BBL machines or use LAN mode only can safely turn on this function." #~ msgstr "Це зупиняє передачу даних до хмарних сервісів Bambu. Користувачі, які не користуються машинами BBL або використовують лише режим локальної мережі, можуть безпечно ввімкнути цю функцію." #~ msgid "Saving objects into the 3MF failed." #~ msgstr "Збереження обʼєктів у 3MF не вдалося." #~ msgid "Only Windows 10 is supported." #~ msgstr "Підтримується лише Windows 10." #~ msgid "Failed to initialize the WinRT library." #~ msgstr "Не вдалося ініціалізувати бібліотеку WinRT." #~ msgid "Exporting objects" #~ msgstr "Експорт обʼєктів" #~ msgid "Failed loading objects." #~ msgstr "Не вдалося завантажити обʼєкти." #~ msgid "Repairing object by Windows service" #~ msgstr "Відновлення обʼєкта службою Windows" #~ msgid "Repair failed." #~ msgstr "Ремонт не вдалося." #~ msgid "Loading repaired objects" #~ msgstr "Завантаження відремонтованих обʼєктів" #~ msgid "Exporting 3MF file failed" #~ msgstr "Експорт файлу 3MF не вдалося" #~ msgid "Import 3MF file failed" #~ msgstr "Імпорт файлу 3MF не вдалося" #~ msgid "Repaired 3MF file does not contain any object" #~ msgstr "Відремонтований файл 3MF не містить жодного обʼєкта" #~ msgid "Repaired 3MF file contains more than one object" #~ msgstr "Відремонтований файл 3MF містить більше одного обʼєкта" #~ msgid "Repaired 3MF file does not contain any volume" #~ msgstr "Відремонтований файл 3MF не містить жодного тома" #~ msgid "Repaired 3MF file contains more than one volume" #~ msgstr "Відремонтований файл 3MF містить більше одного тома" #~ msgid "" #~ "The direction which the wall loops are extruded when looking down from the top.\n" #~ "\n" #~ "By default all walls are extruded in counter-clockwise, unless Reverse on even is enabled. Set this to any option other than Auto will force the wall direction regardless of the Reverse on even.\n" #~ "\n" #~ "This option will be disabled if spiral vase mode is enabled." #~ msgstr "" #~ "Напрямок, у якому екструдуються петлі стінки при погляді зверху вниз.\n" #~ "\n" #~ "За замовчуванням всі стінки екструдуються проти годинникової стрілки, якщо тільки не увімкнено 'Реверсування на парних'. Встановлення цього параметра на будь-яке значення, окрім 'Auto', примусово задасть напрямок стінки незалежно від 'Реверсування на парних'.\n" #~ "\n" #~ "Цей параметр буде вимкнено, якщо увімкнено режим \"спіральної вази\"." #~ msgid "" #~ "Noise type to use for fuzzy skin generation:\n" #~ "Classic: Classic uniform random noise.\n" #~ "Perlin: Perlin noise, which gives a more consistent texture.\n" #~ "Billow: Similar to perlin noise, but clumpier.\n" #~ "Ridged Multifractal: Ridged noise with sharp, jagged features. Creates marble-like textures.\n" #~ "Voronoi: Divides the surface into voronoi cells, and displaces each one by a random amount. Creates a patchwork texture." #~ msgstr "" #~ "Тип шуму для генерації Шорсткої Поверхні.\n" #~ "Класичний: Класичний рівномірний випадковий шум.\n" #~ "Перлін: Шум Перліна, який дає більш цілісну текстуру.\n" #~ "Хвильовий: Подібний до шуму Перліна, але більш складний.\n" #~ "Гребеневий мультифрактал: Гребеневий шум із різкими, нерівними рисами. Створює мармурові текстури.\n" #~ "Вороного: Ділить поверхню на комірки Вороного та зміщує кожну з них на випадкову відстань. Створює клаптеву текстуру." #~ msgid "Flow Rate" #~ msgstr "Потік" #~ msgid "" #~ "Zero first layer height is invalid.\n" #~ "\n" #~ "The first layer height will be reset to 0.2." #~ msgstr "" #~ "Нульова висота першого шару недопустима.\n" #~ "\n" #~ "Висоту першого шару буде скинуто до 0,2 мм." #~ msgid "Check for Update" #~ msgstr "Перевірити оновлення" #~ msgid "Rotate of view" #~ msgstr "Повернути вигляд" #~ msgid "Move of view" #~ msgstr "Переміщення виду" #~ msgid "Zoom of view" #~ msgstr "Масштаб вигляду" #~ msgid "Extruders count" #~ msgstr "Кількість екструдерів" #~ msgid "Missing BambuSource component registered for media playing! Please re-install BambuStudio or seek after-sales help." #~ msgstr "Відсутній компонент BambuSource, зареєстрований для відтворення медіафайлів! Будь ласка, перевстановіть BambuStudio або зверніться за додатковою допомогою." #~ msgid "Line pattern of support." #~ msgstr "Лінія підтримки" #~ msgid "Failed to install the plug-in. Please check whether it is blocked or deleted by anti-virus software." #~ msgstr "" #~ "Не вдалося встановити плагін. Будь ласка, перевірте, чи він не заблокований або видалений\n" #~ "за допомогою антивірусного програмного забезпечення." #~ msgid "travel" #~ msgstr "переміщення" #~ msgid "Replace with STL" #~ msgstr "Замінити на STL" #~ msgid "Replace the selected part with new STL" #~ msgstr "Замініть вибрану частину новим STL" #~ msgid "Loading G-code" #~ msgstr "Завантаження G-кодів" #~ msgid "Generating geometry vertex data" #~ msgstr "Генерація даних вершин геометрії" #~ msgid "Generating geometry index data" #~ msgstr "Генерація даних індексу геометрії" #~ msgid "Switch to silent mode" #~ msgstr "Переключитися в тихий режим" #~ msgid "Switch to normal mode" #~ msgstr "Переключитися у звичайний режим" #~ msgid "The application cannot run normally because OpenGL version is lower than 2.0.\n" #~ msgstr "Додаток не може працювати нормально, оскільки версія OpenGL нижче, ніж 2.0.\n" #~ msgid "Nozzle Type" #~ msgstr "Тип насадки" #~ msgid "Advance" #~ msgstr "Профі" #~ msgid "Filament shrinkage will not be used because filament shrinkage for the used filaments differs significantly." #~ msgstr "Усадка філаменту не буде використовуватися, оскільки усадка філаменту, що використовуються, суттєво відрізняється." #~ msgid "" #~ "Controls the density (spacing) of external bridge lines. 100% means solid bridge. Default is 100%.\n" #~ "\n" #~ "Lower density external bridges can help improve reliability as there is more space for air to circulate around the extruded bridge, improving its cooling speed." #~ msgstr "" #~ "Керує щільністю (відстанню) зовнішніх мостових ліній. 100% означає суцільний міст. Типове значення - 100%.\n" #~ "\n" #~ "Менша щільність зовнішніх мостів може покращити надійність, оскільки збільшується простір для циркуляції повітря навколо екструдованого мосту, що сприяє швидшому охолодженню." #, no-c-format, no-boost-format #~ msgid "" #~ "Enter the shrinkage percentage that the filament will get after cooling (94% if you measure 94mm instead of 100mm). The part will be scaled in XY to compensate. Only the filament used for the perimeter is taken into account.\n" #~ "Be sure to allow enough space between objects, as this compensation is done after the checks." #~ msgstr "" #~ "Введіть відсоток усадки, який отримає нитка після охолодження (94%, якщо ви вимірюєте 94 мм замість 100 мм). Деталь буде масштабовано по осях X та Y для компенсації. До уваги береться лише нитка, що використовується для периметра.\n" #~ "Переконайтеся, що між обʼєктами достатньо місця, оскільки ця компенсація виконується після перевірки." #~ msgid "Acceleration of outer walls." #~ msgstr "Прискорення зовнішніх периметрів" #~ msgid "Don't retract when the travel is in infill area absolutely. That means the oozing can't been seen. This can reduce times of retraction for complex model and save printing time, but make slicing and G-code generating slower." #~ msgstr "Повністю відключає втягування при переміщенні в зоні заповнення. При цьому витікання не буде помітно. Це може зменшити час втягування складної моделі та заощадити час друку, але уповільнить нарізку та генерацію G-коду" #~ msgid "downward machines check" #~ msgstr "Перевірка зворотної сумісності принтера" #~ msgid "check whether current machine downward compatible with the machines in the list." #~ msgstr "Перевірити, чи поточний принтер сумісний із попередніми моделями у списку" #~ msgid "Connecting to printer" #~ msgstr "Підключення до принтера" #~ msgid "Ok" #~ msgstr "Добре" #~ msgid "Adaptive layer height" #~ msgstr "Адаптивна ширина шару" #~ msgid "Enabling this option means the height of tree support layer except the first will be automatically calculated." #~ msgstr "Включення цієї опції означає, що висота шару підтримки дерева, за виключенням першого, буде розрахована автоматично " #~ msgid "AMS not connected" #~ msgstr "АМС не підключено" #~ msgid "Ext Spool" #~ msgstr "Зовнішня котушка" #~ msgid "Guide" #~ msgstr "Гід" #~ msgid "Calibrating AMS..." #~ msgstr "Калібрування АМС..." #~ msgid "A problem occurred during calibration. Click to view the solution." #~ msgstr "Під час калібрування виникла проблема. Натисніть, щоб переглянути рішення." #~ msgid "Calibrate again" #~ msgstr "Повторити калібрування" #~ msgid "Cancel calibration" #~ msgstr "Скасувати калібрування" #~ msgid "Feed Filament" #~ msgstr "Подача філаменту" #~ msgid "An SD card needs to be inserted before printing via LAN." #~ msgstr "Перед друком через локальну мережу необхідно вставити картку SD." #~ msgid "An SD card needs to be inserted before sending to printer." #~ msgstr "Перед надсиланням на принтер необхідно вставити картку SD." #~ msgid "Note: Only the AMS slots loaded with the same material type can be selected." #~ msgstr "Примітка. Можна вибрати лише слоти AMS, завантажені одним і тим же типом матеріалу." #~ msgid "" #~ "If there are two identical filaments in AMS, AMS filament backup will be enabled.\n" #~ "(Currently supporting automatic supply of consumables with the same brand, material type, and color)" #~ msgstr "" #~ "Якщо в AMS є два ідентичні філаменти, резервне копіювання філаменту буде увімкнено.\n" #~ "(Зараз підтримується автоматичне забезпечення споживних матеріалів однакового бренду, типу матеріалу і кольору)" #~ msgid "The AMS will estimate Bambu filament's remaining capacity after the filament info is updated. During printing, remaining capacity will be updated automatically." #~ msgstr "AMS зчитує інформацію про витратний матеріал Bambu та розраховує його залишкову ємність на котушці. Залишкова ємність автоматично оновлюється в процесі друку." # TODO: Review, changed by lang refactor. PR 14254 #~ msgid "The recommended minimum temperature is less than 190℃ or the recommended maximum temperature is greater than 300℃.\n" #~ msgstr "Мінімально рекомендована температура менше 190 градусів або максимально рекомендована температура більше 300 градусів.\n" #~ msgid "Spiral mode only works when wall loops is 1, support is disabled, top shell layers is 0, sparse infill density is 0 and timelapse type is traditional." #~ msgstr "Спіральний режим працює лише тоді, коли петлі на стіні дорівнюють 1, підтримку вимкнено, верхні шари оболонки дорівнюють 0, щільність заповнення дорівнює 0 і тип сповільненої зйомки традиційний." #~ msgid "Sweeping XY mech mode" #~ msgstr "Перевірка XY-механіки" #~ msgid "Paused due to filament runout" #~ msgstr "Пуаза через датчик філаменту" #~ msgid "Heating hotend" #~ msgstr "Нагрів хотенду" #~ msgid "Calibrating extrusion" #~ msgstr "Калібрування екструзії" #~ msgid "Printing was paused by the user" #~ msgstr "Друк припинено користувачем" #~ msgid "Pause of front cover falling" #~ msgstr "Пауза під час падіння передньої кришки з голови" #~ msgid "Calibrating extrusion flow" #~ msgstr "Калібровка потоку екструзії" #~ msgid "Paused due to nozzle temperature malfunction" #~ msgstr "Пауза при несправності температури сопла" #~ msgid "Paused due to heat bed temperature malfunction" #~ msgstr "Пауза при несправності температури столу" #~ msgid "Skip step pause" #~ msgstr "Пропустити команду паузи" #~ msgid "Motor noise calibration" #~ msgstr "Калібрування шуму мотора" #~ msgid "Paused due to AMS lost" #~ msgstr "Пауза через втрату сигналу AMS" #~ msgid "Paused due to low speed of the heat break fan" #~ msgstr "Пауза через низьку швидкість вентилятора термобарʼєру" #~ msgid "Paused due to chamber temperature control error" #~ msgstr "Пауза через помилку контролю температури камери" #~ msgid "Paused by the G-code inserted by user" #~ msgstr "Друк припинено G-кодом, вставленим користувачем" #~ msgid "Nozzle filament covered detected pause" #~ msgstr "Пауза при виявленні протікання матеріалу" #~ msgid "Cutter error pause" #~ msgstr "Пауза при помилці обрізки нитки" #~ msgid "First layer error pause" #~ msgstr "Пауза через помилку першого шару" #~ msgid "Nozzle clog pause" #~ msgstr "Пауза через засмічення сопла" #~ msgid "Fatal" #~ msgstr "Критична помилка" #~ msgid "Serious" #~ msgstr "Серйозний" #~ msgid "Common" #~ msgstr "Загальний" #~ msgid "The current chamber temperature or the target chamber temperature exceeds 45℃. In order to avoid extruder clogging, low temperature filament (PLA/PETG/TPU) is not allowed to be loaded." #~ msgstr "Поточна температура камери або цільова температура камери перевищує 45℃. Щоб уникнути забивання екструдера, не дозволяється завантажувати філаменти низької температури (PLA/PETG/TPU)." #~ msgid "Low temperature filament (PLA/PETG/TPU) is loaded in the extruder. In order to avoid extruder clogging, it is not allowed to set the chamber temperature above 45℃." #~ msgstr "Філамент низької температури (PLA/PETG/TPU) завантажено в екструдер. Щоб уникнути забивання екструдера, не дозволяється встановлювати температуру камери вище 45℃." #~ msgid "Bambu PET-CF/PA6-CF is not supported by AMS." #~ msgstr "Bambu PET-CF/PA6-CF не підтримується AMS." #~ msgid "" #~ "An object is laid over the plate boundaries or exceeds the height limit.\n" #~ "Please solve the problem by moving it totally on or off the plate, and confirming that the height is within the build volume." #~ msgstr "" #~ "Обʼєкт знаходиться за кордоном пластини або перевищує обмеження по висоті.\n" #~ "Будь ласка, вирішіть проблему, перемістивши її повністю на тарілку або з неї,і підтвердження того, що висота знаходиться в межах обсягу збирання." #~ msgid "" #~ "You can find it in \"Settings > Network > Connection code\"\n" #~ "on the printer, as shown in the figure:" #~ msgstr "" #~ "Ви можете знайти його в \\Установки > Мережа > Код підключення\"\n" #~ "на принтері, як показано на малюнку:" #~ msgid "Browsing file in SD card is not supported in current firmware. Please update the printer firmware." #~ msgstr "Перегляд файлів на SD-картці не підтримується в поточній версії прошивки. Будь ласка, оновіть прошивку принтера." #~ msgid "" #~ "Please check if the SD card is inserted into the printer.\n" #~ "If it still cannot be read, you can try formatting the SD card." #~ msgstr "" #~ "Будь ласка, перевірте, чи вставлена SD-карта в принтер.\n" #~ "Якщо вона все ще не розпізнається, ви можете спробувати форматувати SD-карту." #~ msgid "Browsing file in SD card is not supported in LAN Only Mode." #~ msgstr "Перегляд файлів на SD-картці не підтримується в режимі лише LAN." #~ msgid "Storage unavailable, insert SD card." #~ msgstr "Зберігання недоступне, вставте SD-карту." #~ msgid "Cham" #~ msgstr "Камера" #~ msgid "Still unload" #~ msgstr "Ще розвантажити" #~ msgid "Still load" #~ msgstr "Ще завантажити" #~ msgid "Can't start this without SD card." #~ msgstr "Не можу запустити це без SD-карти." #~ msgid "Sensitivity of pausing is" #~ msgstr "Чутливість паузи" #, c-format, boost-format #~ msgid "%.1f" #~ msgstr "%.1f" #~ msgid "No AMS filaments. Please select a printer in 'Device' page to load AMS info." #~ msgstr "Немає ниток AMS. Виберіть принтер на сторінці «Пристрій», щоб завантажити інформацію AMS." #~ msgid "Sync filaments with AMS will drop all current selected filament presets and colors. Do you want to continue?" #~ msgstr "" #~ "Синхронізація ниток з AMS видаляє всі поточні вибрані пресети ниток і\n" #~ "Кольори. Ви хочете продовжувати?" #~ msgid "Already did a synchronization, do you want to sync only changes or resync all?" #~ msgstr "" #~ "Синхронізацію вже робив, синхронізувати лише зміни абопересинхронізувати\n" #~ "Усе?" #~ msgid "Sync" #~ msgstr "Синхронізувати" #~ msgid "Resync" #~ msgstr "Повторна синхронізація" #~ msgid "There are some unknown filaments mapped to generic preset. Please update Orca Slicer or restart Orca Slicer to check if there is an update to system presets." #~ msgstr "Є кілька невідомих ниток, зіставлених із загальною передустановкою.Будь ласка, оновіть Orca Slicer або перезапустіть Orca Slicer, щоб перевірити, чи є оновлення для системи пресети." #~ msgid "" #~ "Are you sure you want to store original SVGs with their local paths into the 3MF file?\n" #~ "If you hit 'NO', all SVGs in the project will not be editable any more." #~ msgstr "" #~ "Ви впевнені, що хочете зберегти оригінальні SVG-файли з їхніми локальними шляхами у 3MF-файл?\n" #~ "Якщо ви натиснете \"НІ\", всі SVG-файли у проекті будуть недоступні для редагування." #~ msgid "Private protection" #~ msgstr "Приватний захист" #~ msgid "General Settings" #~ msgstr "Загальні налаштування" #~ msgid "Show \"Tip of the day\" notification after start" #~ msgstr "Показувати повідомлення \"Порада дня\" після запуску" #~ msgid "If enabled, useful hints are displayed at startup." #~ msgstr "Якщо увімкнено, під час запуску відображаються корисні підказки." #~ msgid "Flushing volumes: Auto-calculate every time the color changed." #~ msgstr "Обʼєми промивки: автоматично перераховувати кожного разу при зміні кольору." #~ msgid "If enabled, auto-calculate every time the color changed." #~ msgstr "Якщо увімкнено, авто-розраховувння кожного разу, коли змінюється колір." #~ msgid "Flushing volumes: Auto-calculate every time when the filament is changed." #~ msgstr "Об’єми промивки: автоматично перераховувати кожного разу при зміні філаменту." #~ msgid "If enabled, auto-calculate every time when filament is changed" #~ msgstr "Якщо ввімкнено, автоматично обчислювати кожного разу, коли змінюється філамент" #~ msgid "Auto arrange plate after object cloning" #~ msgstr "Автоматично впорядкувати обʼєкти пластини після копіювання обʼєкту" #~ msgid "Network" #~ msgstr "Мережа" #~ msgid "User Sync" #~ msgstr "Синхронізація користувачів" #~ msgid "System Sync" #~ msgstr "Синхронізація системи" #~ msgid "Associate URLs to OrcaSlicer" #~ msgstr "Асоціювати URL-адреси з OrcaSlicer" #~ msgid "every" #~ msgstr "кожен" #~ msgid "Downloads" #~ msgstr "Завантаження" #~ msgid "Dark Mode" #~ msgstr "Темний режим" #~ msgid "Home page and daily tips" #~ msgstr "Головна сторінка та щоденні поради" #~ msgid "Show home page on startup" #~ msgstr "Показувати домашню сторінку під час запуску" #~ msgid "Please choose the filament color" #~ msgstr "Будь ласка, виберіть колір філаменту" #~ msgid "Send print job to" #~ msgstr "Надіслати завдання на друк на" #, c-format, boost-format #~ msgid "Filament %s exceeds the number of AMS slots. Please update the printer firmware to support AMS slot assignment." #~ msgstr "Філамент %s перевищує кількість слотів AMS. Будь ласка, оновіть прошивку принтер для підтримки призначення слотів AMS." #~ msgid "Filament exceeds the number of AMS slots. Please update the printer firmware to support AMS slot assignment." #~ msgstr "" #~ "Філамент перевищує кількість слотів AMS. Будь ласка, оновіть прошивкупринтера\n" #~ "для підтримки призначення слотів AMS." #~ msgid "Filaments to AMS slots mappings have been established. You can click a filament above to change its mapping AMS slot" #~ msgstr "" #~ "Встановили зіставлення ниток зі слотами AMS. Ви можете натиснути\n" #~ "Філамент вище, щоб змінити її слот зіставлення AMS" #~ msgid "Please click each filament above to specify its mapping AMS slot before sending the print job" #~ msgstr "Клацніть кожен філамент вище, щоб вказати його слот зіставлення AMS,Перш ніж відправити завдання на друк" #~ msgid "The printer firmware only supports sequential mapping of filament => AMS slot." #~ msgstr "Прошивка принтера підтримує лише послідовне зіставлення філаменту => AMS слот." #~ msgid "An SD card needs to be inserted before printing." #~ msgstr "Перед початком друку необхідно вставити картку SD." #~ msgid "An SD card needs to be inserted to record timelapse." #~ msgstr "SD-карта повинна бути вставлена для запису таймлапсу." #, c-format, boost-format #~ msgid "nozzle memorized: %.1f %s" #~ msgstr "запам’ятоване сопло: %.1f %s" #~ msgid "Your nozzle diameter in sliced file is not consistent with memorized nozzle. If you changed your nozzle lately, please go to Device > Printer Parts to change settings." #~ msgstr "Ваш діаметр сопла в розрізаному файлі не відповідає запам’ятаному діаметру сопла. Якщо ви недавно змінили сопло, будь ласка, перейдіть до “Пристрій > Частини принтера”, щоб змінити налаштування." #, c-format, boost-format #~ msgid "Printing high temperature material (%s material) with %s may cause nozzle damage" #~ msgstr "Друк високотемпературного матеріалу (%s матеріал) з %s може призвести до пошкодження сопла" #~ msgid "Connecting to the printer. Unable to cancel during the connection process." #~ msgstr "З’єднання з принтером. Під час процесу підключення скасувати неможливо." #~ msgid "Caution to use! Flow calibration on Textured PEI Plate may fail due to the scattered surface." #~ msgstr "Використовуйте обережно! Калібрування потоку на пластині Текстурованій PEI Пластині може бути невдалим через розсіяну поверхню." #~ msgid "Automatic flow calibration using Micro Lidar" #~ msgstr "Автоматична калібрування потоку за допомогою мікро лідару" #~ msgid "Send to Printer SD card" #~ msgstr "Надіслати на SD-карту принтера" #~ msgid "An SD card needs to be inserted before send to printer SD card." #~ msgstr "Перед надсиланням на картку SD принтера необхідно вставити картку SD." #~ msgid "The printer does not support sending to printer SD card." #~ msgstr "Принтер не підтримує надсилання на картку SD принтера." #, c-format, boost-format #~ msgid "The color count should be in range [%d, %d]." #~ msgstr "Кількість кольорів повинна бути в діапазоні [%d, %d]." #~ msgid "Current filament colors:" #~ msgstr "Поточні кольори філаменту:" #~ msgid "Quick set:" #~ msgstr "Швидке встановлення:" #~ msgid "Add consumable extruder after existing extruders." #~ msgstr "Додати споживчий екструдер після існуючих екструдерів." #~ msgid "Cluster colors" #~ msgstr "Згрупувати кольори" #~ msgid "Map Filament" #~ msgstr "Відображення філаменту" #~ msgid "" #~ "Note: The color has been selected, you can choose OK \n" #~ "to continue or manually adjust it." #~ msgstr "" #~ "Примітка: Колір вже вибрано. Ви можете вибрати ОК \n" #~ "щоб продовжити або вручну відкоригувати його." #~ msgid "" #~ "Warning: The count of newly added and \n" #~ "current extruders exceeds 16." #~ msgstr "" #~ "Попередження: Кількість новостворених та \n" #~ "поточних екструдерів перевищує 16." #~ msgid "Auto-Calc" #~ msgstr "Автокалькулятор" #~ msgid "Orca would re-calculate your flushing volumes every time the filaments color changed. You could disable the auto-calculate in Orca Slicer > Preferences" #~ msgstr "Orca буде перераховувати обʼєми промивки філаменту кожного разу, коли змінюється колір філаменту. Ви можете вимкнути автоматичний розрахунок у меню Orca Slicer > Параметри" #~ msgid "unloaded" #~ msgstr "вивантажено" #~ msgid "loaded" #~ msgstr "завантажено" #~ msgid "Filament #" #~ msgstr "Філамент #" #~ msgid "From" #~ msgstr "Від" #~ msgid "To" #~ msgstr "В" #~ msgid "Resume Printing (defects acceptable)" #~ msgstr "Відновлення друку (прийнятно дефекти)" #~ msgid "Resume Printing (problem solved)" #~ msgstr "Відновлення друку (проблема вирішена)" #~ msgid "Step 1. Please confirm Orca Slicer and your printer are in the same LAN." #~ msgstr "Крок 1. Будь-ласка переконайтесь що Orca Slicer та принтер знаходяться в одній в мережі." #~ msgid "Step 2. If the IP and Access Code below are different from the actual values on your printer, please correct them." #~ msgstr "Крок 2. Якщо IP та Код доступу нижче відрізняються від значень на принтері, будь-ласка відкоригуйте їх." #~ msgid "Step 3. Please obtain the device SN from the printer side; it is usually found in the device information on the printer screen." #~ msgstr "Крок 3. Будь-ласка знайдіть Серійний Номер (SN) принтера; зазвичай його модна знайти в інформації на екрані принтера." #~ msgid " is too close to others, there may be collisions when printing." #~ msgstr " занадто близько до інших, під час друку можливі зіткнення." #~ msgid "Cannot print multiple filaments which have large difference of temperature together. Otherwise, the extruder and nozzle may be blocked or damaged during printing." #~ msgstr "Не можна друкувати кілька ниток, які мають значну різницю в температурі разом. В іншому випадку екструдер та сопло можуть бути заблоковані або пошкоджені під час друку" #~ msgid "Ironing angle" #~ msgstr "Кут прасування" #~ msgid "The angle ironing is done at. A negative number disables this function and uses the default method." #~ msgstr "Прасування виконується під кутом. Відʼємне число вимикає цю функцію і використовує метод за замовчуванням." #~ msgid "Remove small overhangs" #~ msgstr "Видалити невеликі виступи" #~ msgid "Remove small overhangs that possibly need no supports." #~ msgstr "Видалити невеликі виступи, які, можливо, не потребують підтримки." #~ msgid "Only one of the results with the same name will be saved. Are you sure you want to overwrite the other results?" #~ msgstr "Тільки один із результатів з однаковою назвою буде збережено. Ви впевнені, що хочете перезаписати інші результати?" #~ msgid "External Spool" #~ msgstr "Зовнішній барабан" #~ msgid "" #~ "Please input valid values:\n" #~ "Start temp: <= 350\n" #~ "End temp: >= 170\n" #~ "Start temp > End temp + 5" #~ msgstr "" #~ "Будь ласка, введіть правильні значення:\n" #~ "Початкова температура: <= 350\n" #~ "Кінцева температура: >= 170\n" #~ "Початкова температура > Кінцева температура + 5)" #~ msgid "The custom printer or model is not entered, please enter it." #~ msgstr "Власна модель або принтер не введені. Будь ласка, введіть дані." #, c-format, boost-format #~ msgid "nozzle in preset: %s %s" #~ msgstr "сопло в налаштуваннях: %s %s" #~ msgid "Your nozzle diameter in preset is not consistent with memorized nozzle diameter. Did you change your nozzle lately?" #~ msgstr "Діаметр вашого сопла в налаштуваннях не відповідає збереженому діаметру сопла. Чи змінювали ви своє сопло останнім часом?" #, c-format, boost-format #~ msgid "*Printing %s material with %s may cause nozzle damage" #~ msgstr "*Друк матеріалу %s з використанням сопла %s може призвести до пошкодження сопла" #~ msgid "Improve shell precision by adjusting outer wall spacing. This also improves layer consistency." #~ msgstr "Підвищення точності оболонки за рахунок регулювання відстані між зовнішнімипериметрами. Це також покращує узгодженість шарів." #~ msgid "Enable filament ramming." #~ msgstr "Увімкнути накат нитки" #~ msgid "Alt + Mouse wheel" #~ msgstr "Alt + коліщатко миші" #~ msgid "Ctrl + Mouse wheel" #~ msgstr "Ctrl + коліщатко миші" #~ msgid "Shift + Left mouse button" #~ msgstr "Shift + Ліва кнопка миші" #~ msgid "Alt + Shift + Enter" #~ msgstr "Alt + Shift + Enter" #~ msgid "Shift + Mouse move up or down" #~ msgstr "Shift + переміщення миші вгору або вниз" #~ msgid "Left mouse button:" #~ msgstr "Ліва кнопка миші:" #~ msgid "Right mouse button:" #~ msgstr "Права кнопка миші:" #~ msgid "Shift + Left mouse button:" #~ msgstr "SHIFT + Ліва кнопка миші:" #~ msgid "Shift + Right mouse button:" #~ msgstr "Shift + права кнопка миші:" #~ msgid "Recent projects" #~ msgstr "Недавні проєкти" #~ msgid "Maximum recent projects" #~ msgstr "Максимум останніх проектів" #~ msgid "Maximum count of recent projects" #~ msgstr "Максимальна кількість останніх проектів" #~ msgid "⌘+Any arrow" #~ msgstr "⌘+будь-яка стрілка" #~ msgid "⌥+Left mouse button" #~ msgstr "⌥+Ліва кнопка миші" #~ msgid "⌘+Left mouse button" #~ msgstr "⌘+Ліва кнопка миші" #~ msgid "Ctrl+Any arrow" #~ msgstr "Ctrl+будь-яка стрілка" #~ msgid "Alt+Left mouse button" #~ msgstr "Alt+Ліва кнопка миші" #~ msgid "Ctrl+Left mouse button" #~ msgstr "Ctrl+Ліва кнопка миші" #~ msgid "Shift+Left mouse button" #~ msgstr "Shift+Ліва кнопка миші" #~ msgid "Shift+Any arrow" #~ msgstr "Shift+будь-яка стрілка" #~ msgid "⌘+Mouse wheel" #~ msgstr "⌘+Колесо миші" #~ msgid "⌥+Mouse wheel" #~ msgstr "⌥+Колесо миші" #~ msgid "Ctrl+Mouse wheel" #~ msgstr "Ctrl+Колесо миші" #~ msgid "Alt+Mouse wheel" #~ msgstr "Alt+колесо миші" #~ msgid "Shift+Mouse wheel" #~ msgstr "Shift+колесо миші" #~ msgid "Set Position" #~ msgstr "Встановити позицію" #, boost-format #~ msgid "%1%" #~ msgstr "%1%" #~ msgid "Right click the icon to fix model object" #~ msgstr "Клацніть правою кнопкою миші значок, щоб виправити обʼєкт моделі" #~ msgid "The target object contains only one part and cannot be split." #~ msgstr "Цільова модель єдина і не може бути поділена на частини." #~ msgid "?" #~ msgstr "?" #~ msgid "/" #~ msgstr "/" #~ msgid "Color Scheme" #~ msgstr "Колірна схема" #~ msgid "Percent" #~ msgstr "Відсоток" #~ msgid "720p" #~ msgstr "720p" #~ msgid "1080p" #~ msgstr "1080p" #~ msgid "More..." #~ msgstr "Більше..." #~ msgid "More calibrations" #~ msgstr "Більше калібрування" #~ msgid "SD Card" #~ msgstr "SD картка" #~ msgid "100%" #~ msgstr "100%" #~ msgid "No SD Card" #~ msgstr "Немає картки SD" #~ msgid "SD Card Abnormal" #~ msgstr "SD-картка не в порядку" #, c-format, boost-format #~ msgid "Ejecting of device %s(%s) has failed." #~ msgstr "Помилка виймання пристрою %s(%s)." #~ msgid "This option can be changed later in preferences, under 'Load Behaviour'." #~ msgstr "Ця опція може бути змінена у налаштуваннях пізніше, під 'Поведінка завантаження'." #~ msgid "Invalid number" #~ msgstr "Неправильний номер" #, c-format, boost-format #~ msgid "nozzle memorized: %.2f %s" #~ msgstr "сопло у памʼяті: %.2f %s" #~ msgid "Bed temperature when the Cool Plate Supertack is installed. A value of 0 means the filament does not support printing on the Cool Plate SuperTack." #~ msgstr "Температура столу при встановленій холодній пластині. Значення 0 означає що філамент не підтримує друк на Холодній Пластині SuperTack" #~ msgid "Ramming settings" #~ msgstr "Налаштування раммінгу" #~ msgid "Profile dependencies" #~ msgstr "Залежності профілю" #~ msgid "the Configuration package is incompatible with the current APP." #~ msgstr "пакет конфігурації несумісний з поточним APP." #~ msgid "Total ramming time" #~ msgstr "Загальний час швидкої екструзії" #~ msgid "Total rammed volume" #~ msgstr "Загальний обсяг швидкої екструзії" #~ msgid "Ramming line width" #~ msgstr "Ширина ліній раммінгу" #~ msgid "Ramming line spacing" #~ msgstr "Проміжки між лініями раммінгу" #~ msgid "resume" #~ msgstr "продовжити" #~ msgid "Classic mode" #~ msgstr "Класичний режим" #~ msgid "Enable this option to use classic mode." #~ msgstr "Увімкнути цей параметр для використання класичного режиму" #~ msgid "Compatible machine" #~ msgstr "Сумісна машина" #~ msgid "Compatible machine condition" #~ msgstr "Сумісний стан машини" #~ msgid "Compatible process profiles condition" #~ msgstr "Стан сумісних профілів процесів" #~ msgid "Default filament color" #~ msgstr "Колір філаменту за замовчуванням" #~ msgid "Rotate solid infill direction" #~ msgstr "Повертати напрямок суцільного заповнення" #~ msgid "Rotate the solid infill direction by 90° for each layer." #~ msgstr "Повертати напрямок суцільного заповнення на 90° для кожного шару." #~ msgid "Flow Compensation Model, used to adjust the flow for small infill areas. The model is expressed as a comma separated pair of values for extrusion length and flow correction factors, one per line, in the following format: \"1.234,5.678\"" #~ msgstr "Модель компенсації потоку, що використовується для коригування потоку для невеликих ділянок заповнення. Модель виражається у вигляді пари значень довжини екструзії та коефіцієнтів корекції потоку, розділених комами, по одному в рядку, у наступному форматі: \"1.234,5.678\"" #~ msgid "The highest printable layer height for the extruder. Used to limit the maximum layer height when adaptive layer height is enabled." #~ msgstr "Найбільша висота шару, що друкується, для екструдера. Використовуваний tp обмежує максимальну висоту шару при включенні адаптивної висоти шару" #~ msgid "The lowest printable layer height for the extruder. Used to limit the minimum layer height when adaptive layer height is enabled." #~ msgstr "Найнижча висота шару, що друкується, для екструдера. Використовуваний tp обмежує мінімальну висоту шару при включенні адаптивної висоти шару" #~ msgid "Retract on top layer" #~ msgstr "Ретракт на верхньому шарі" #~ msgid "Force a retraction on top layer. Disabling could prevent clog on very slow patterns with small movements, like Hilbert curve." #~ msgstr "Примусове втягування на верхньому шарі. Вимкнення може запобігти засміченню на дуже повільних візерунках із малими переміщеннями, таких як крива Гільберта" #~ msgid "Some amount of material in extruder is pulled back to avoid ooze during long travel. Set zero to disable retraction" #~ msgstr "Деяка кількість матеріалу в екструдері витягується назад, щоб уникнути витікання під час тривалого переміщення. Встановіть нуль, щоб відключити втягування" #~ msgid "Speed of retractions." #~ msgstr "Швидкість ретракту" #~ msgid "Speed for reloading filament into extruder. Zero means same speed of retraction." #~ msgstr "Швидкість перезарядки філпмента в екструдер. Нуль означає ту ж швидкість при ретракті" #~ msgid "Spacing of interface lines. Zero means solid interface." #~ msgstr "Відстань між лініями підтримки. Нуль означає суцільну підтримку" #~ msgid "Load filament IDs for each object" #~ msgstr "Завантажувати id філаментів для кожного обʼєкта" #~ msgid "" #~ "We now have added the auto-calibration for different filaments, which is fully automated and the result will be saved into the printer for future use. You only need to do the calibration in the following limited cases:\n" #~ "1. If you introduce a new filament of different brands/models or the filament is damp\n" #~ "2. If the nozzle is worn out or replaced with a new one\n" #~ "3. If the max volumetric speed or print temperature is changed in the filament setting" #~ msgstr "" #~ "Зараз у нас є можливість автоматичної калібрації для різних філаментів, яка є повністю автоматизованою, і результат буде збережено в принтері для подальшого використання. Вам потрібно робити калібрування лише в таких обмежених випадках:\n" #~ "\n" #~ "1. Якщо ви вводите новий філамент різних брендів/моделей або філамент зволожений;\n" #~ "2. Якщо сопло зношене або замінене новим;\n" #~ "3. Якщо максимальна об’ємна швидкість або температура друку змінена в налаштуваннях філаменту." #~ msgid "step: " #~ msgstr "крок: " #~ msgid "mm/mm" #~ msgstr "мм/мм" #~ msgid "Load STL" #~ msgstr "Завантажити STL" #~ msgid "Load svg" #~ msgstr "Завантажити SVG" #~ msgid "Back Page 1" #~ msgstr "Повернутися на 1 сторінку" #~ msgid "Delete Filament" #~ msgstr "Видалити Філамент" #~ msgid "Refresh Printers" #~ msgstr "Оновити принтери" #~ msgid "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height. This results in almost invisible layer lines and higher print quality but shorter print time." #~ msgstr "Порівняно з типовим профілем для насадки 0,2 мм, це має меншу висоту шару, і результатом є майже невидимі лінії шару та вища якість друку, але коротший час друку." #~ msgid "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height. This results in minimal layer lines and higher print quality, but shorter print time." #~ msgstr "Порівняно з типовим профілем для насадки діаметром 0,2 мм, цей профіль має меншу висоту шару, що призводить до мінімальних ліній шарування та вищої якості друку, але скорочує час друку." #~ msgid "It has a very big layer height. This results in very apparent layer lines, low print quality and general print time." #~ msgstr "Він має дуже велику висоту шару, що призводить до дуже помітних ліній шару, низької якості друку і загального часу друку." #~ msgid "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height. This results in very apparent layer lines and much lower print quality but shorter print time in some cases." #~ msgstr "Порівняно з типовим профілем для сопла 0,8 мм, цей профіль має більшу висоту шару, що призводить до дуже помітних ліній шару і значно нижчої якості друку, але коротшого часу друку у деяких випадках друку." #~ msgid "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger layer height. This results in extremely apparent layer lines and much lower print quality but much shorter print time in some cases." #~ msgstr "Порівняно з типовим профілем для сопла 0,8 мм, цей профіль має набагато більшу висоту шару, що призводить до надзвичайно помітних ліній шару і значно нижчої якості друку, але набагато коротшого часу друку у деяких випадках друку." #~ msgid "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer height. This results in less but still apparent layer lines and slightly higher print quality, but longer print time in some cases." #~ msgstr "Порівняно з типовим профілем для сопла 0,8 мм, цей профіль має меншу висоту шару, що призводить до менше, але все ще помітних ліній шару і трохи вищої якості друку, але довшого часу друку у деяких випадках друку." #~ msgid "Connection to Flashforge is working correctly." #~ msgstr "Підключення до Flashforge працює правильно." #~ msgid "Could not connect to Flashforge" #~ msgstr "Не вдалося підключитися до Flashforge" #~ msgid "Set the brim type to \"painted\"" #~ msgstr "Встановіть тип кайми на \"Мальована\""