{
    "type": "machine",
    "name": "fdm_machine_common",
    "from": "system",
    "instantiation": "false",
    "gcode_flavor": "reprapfirmware",
    "machine_start_gcode": "M109 S[nozzle_temperature_initial_layer]\nG1 Z10 F6000 ;Move the platform down 10mm\nG1 X60 Y10 F10000\nG1 Z0.25 F6000 ;Move the platform down 0,25mm\nG92 E0\nG1 X200 E20 F1000\nG1 X450 E40 F1000\nG92 E0",
    "machine_end_gcode": "{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y200 F3600 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nM221 S100 ; reset flow\nM900 K0 ; reset LA\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM84 ; disable motors",
    "extruder_colour": [
        "#FCE94F"
    ],
    "extruder_offset": [
        "0x0"
    ],
    "machine_max_acceleration_e": [
        "5000",
        "5000"
    ],
    "machine_max_acceleration_extruding": [
        "500",
        "20000"
    ],
    "machine_max_acceleration_retracting": [
        "5000",
        "5000"
    ],
    "machine_max_acceleration_travel": [
        "2500",
        "20000"
    ],
    "machine_max_acceleration_x": [
        "2000",
        "20000"
    ],
    "machine_max_acceleration_y": [
        "2000",
        "20000"
    ],
    "machine_max_acceleration_z": [
        "200",
        "200"
    ],
    "machine_max_speed_e": [
        "500",
        "25"
    ],
    "machine_max_speed_x": [
        "200",
        "200"
    ],
    "machine_max_speed_y": [
        "200",
        "200"
    ],
    "machine_max_speed_z": [
        "12",
        "12"
    ],
    "machine_max_jerk_e": [
        "2.5",
        "2.5"
    ],
    "machine_max_jerk_x": [
        "5",
        "5"
    ],
    "machine_max_jerk_y": [
        "5",
        "5"
    ],
    "machine_max_jerk_z": [
        "0.2",
        "0.4"
    ],
    "machine_min_extruding_rate": [
        "0",
        "0"
    ],
    "machine_min_travel_rate": [
        "0",
        "0"
    ],
    "max_layer_height": [
        "0.32"
    ],
    "min_layer_height": [
        "0.1"
    ],
    "printable_height": "500",
    "extruder_clearance_radius": "65",
    "extruder_clearance_height_to_rod": "36",
    "extruder_clearance_height_to_lid": "140",
    "nozzle_diameter": [
        "0.4"
    ],
    "printer_settings_id": "",
    "printer_technology": "FFF",
    "printer_variant": "0.4",
    "retraction_minimum_travel": [
        "1"
    ],
    "retract_before_wipe": [
        "70%"
    ],
    "retract_when_changing_layer": [
        "0"
    ],
    "retraction_length": [
        "1.6"
    ],
    "retract_length_toolchange": [
        "2"
    ],
    "z_hop": [
        "0.2"
    ],
    "retract_restart_extra": [
        "0"
    ],
    "retract_restart_extra_toolchange": [
        "0"
    ],
    "retraction_speed": [
        "45"
    ],
    "deretraction_speed": [
        "45"
    ],
    "single_extruder_multi_material": [
        "1"
    ],
    "change_filament_gcode": "",
    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
    "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
    "machine_pause_gcode": "M601",
    "wipe": [
        "0"
    ]
}