{
	"type": "process",
	"name": "0.10 High Quality @Snapmaker U1 (0.2 nozzle)",
	"inherits": "fdm_process_U1_0.10_nozzle_0.2",
	"from": "system",
	"setting_id": "BfLpmnJnSBYBFInR",
	"instantiation": "true",
	"description": "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in much higher printing quality, but a much longer printing time.",
	"default_acceleration": "4000",
	"elefant_foot_compensation": "0.15",
	"outer_wall_acceleration": "2000",
	"outer_wall_speed": "60",
	"sparse_infill_pattern": "gyroid",
	"smooth_coefficient": "150",
	"overhang_totally_speed": "50",
	"compatible_printers": [
		"Snapmaker U1 (0.2 nozzle)"
	],
	"enable_arc_fitting": "0",
	"ooze_prevention": "1",
	"precise_outer_wall": "1",
	"prime_tower_brim_width": "5",
	"prime_tower_width": "28",
	"prime_volume": "25",
	"slowdown_for_curled_perimeters": "0",
	"standby_temperature_delta": "-150",
	"support_type": "tree(auto)",
	"wipe_tower_extra_rib_length": "8",
	"wipe_tower_extra_spacing": "120%",
	"wipe_tower_wall_type": "rib"
}