{
	"type": "machine",
	"name": "SeeMeCNC RostockMAX v3.2 0.7 nozzle",
	"from": "System",
	"setting_id": "7hwa9LgYIF4lNiRe",
	"instantiation": "true",
	"adaptive_bed_mesh_margin": "0",
	"auxiliary_fan": "0",
	"bed_custom_model": "SeeMeCNC_Buildplate_Model.STL",
	"bed_custom_texture": "SeeMeCNC_Buildplate_texture.png",
	"bed_exclude_area": [
		"0x0"
	],
	"bed_mesh_max": "99999,99999",
	"bed_mesh_min": "-99999,-99999",
	"bed_mesh_probe_distance": "50,50",
	"bed_temperature_formula": "by_first_filament",
	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n{if layer_num == 1}M104 S[nozzle_temperature] ; Step down from first layer temp to print temp{endif}\nG92 E0\n",
	"best_object_pos": "0.5,0.5",
	"change_extrusion_role_gcode": "",
	"change_filament_gcode": "{if layer_num >= 0}\nG92 E0\nG1 E-5 F3000\nG1 E-155 F5000\nT[next_extruder]\n{if layer_num == 0}\nM109 S[first_layer_temperature]\n{else}\nM109 S[nozzle_temperature]\n{endif}\nG1 E160 F5000\nG92 E0\n{endif}",
	"cooling_tube_length": "5",
	"cooling_tube_retraction": "160",
	"default_filament_profile": [
		"SeeMeCNC PLA"
	],
	"default_nozzle_volume_type": [
		"Standard"
	],
	"default_print_profile": "0.35mm Standard @SeeMeCNC RostockMAX v3.2 0.7",
	"deretraction_speed": [
		"60"
	],
	"disable_m73": "0",
	"emit_machine_limits_to_gcode": "1",
	"enable_filament_ramming": "0",
	"enable_long_retraction_when_cut": "0",
	"enable_power_loss_recovery": "printer_configuration",
	"extra_loading_move": "0",
	"extruder_clearance_height_to_lid": "70",
	"extruder_clearance_height_to_rod": "70",
	"extruder_clearance_radius": "75",
	"extruder_colour": [
		"#FCE94F"
	],
	"extruder_offset": [
		"0x0"
	],
	"extruder_printable_area": [],
	"extruder_printable_height": [
		"385"
	],
	"extruder_type": [
		"Bowden"
	],
	"extruder_variant_list": [
		"Bowden Standard"
	],
	"fan_kickstart": "0",
	"fan_speedup_overhangs": "1",
	"fan_speedup_time": "0",
	"file_start_gcode": "",
	"gcode_flavor": "reprapfirmware",
	"grab_length": [
		"0"
	],
	"head_wrap_detect_zone": [],
	"high_current_on_filament_swap": "0",
	"host_type": "duet",
	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
	"long_retractions_when_cut": [
		"0"
	],
	"machine_end_gcode": [
		";======= SEEMECNC ROSTOCKMAX V3.2 END G-CODE =======\nM104 S0          ; Turn off hotend\nM140 S0          ; Turn off heated bed\nM107 T0          ; Turn off part cooling fan\nG91              ; Relative positioning\nG1 Z2 E-160 F6000  ; Lift 2mm and retract 160mm\nG92 E0\nG90              ; Absolute positioning\nM203 Z18000      ; Allow fast Z for homing\nG28              ; Home all axes - clears part immediately on a delta\n;======= END G-CODE ======="
	],
	"machine_load_filament_time": "4",
	"machine_max_acceleration_e": [
		"5000",
		"5000"
	],
	"machine_max_acceleration_extruding": [
		"5000",
		"5000"
	],
	"machine_max_acceleration_retracting": [
		"5000",
		"5000"
	],
	"machine_max_acceleration_travel": [
		"5000",
		"5000"
	],
	"machine_max_acceleration_x": [
		"5000",
		"5000"
	],
	"machine_max_acceleration_y": [
		"5000",
		"5000"
	],
	"machine_max_acceleration_z": [
		"5000",
		"5000"
	],
	"machine_max_jerk_e": [
		"15",
		"15"
	],
	"machine_max_jerk_x": [
		"15",
		"15"
	],
	"machine_max_jerk_y": [
		"15",
		"15"
	],
	"machine_max_jerk_z": [
		"15",
		"15"
	],
	"machine_max_junction_deviation": [
		"0.01"
	],
	"machine_max_speed_e": [
		"150",
		"25"
	],
	"machine_max_speed_x": [
		"300",
		"300"
	],
	"machine_max_speed_y": [
		"300",
		"300"
	],
	"machine_max_speed_z": [
		"200",
		"200"
	],
	"machine_min_extruding_rate": [
		"0",
		"0"
	],
	"machine_min_travel_rate": [
		"0",
		"0"
	],
	"machine_pause_gcode": "M601",
	"machine_start_gcode": [
		";======= SEEMECNC ROSTOCKMAX V3.2 START G-CODE =======\nG21              ; Set units to mm\nG90              ; Absolute positioning\nM82              ; Extruder to absolute mode\nG28              ; Home all axes\nG1 Z50 F9000     ; Lift nozzle for safe heating\n; --- SELECT STARTING TOOL ---\nT[initial_tool]  ; Activate the first assigned filament in OrcaSlicer\n; --- PREHEAT ---\nM140 S[first_layer_bed_temperature]  ; Start bed heating\nM104 S[first_layer_temperature]      ; Start nozzle heating\nM190 S[first_layer_bed_temperature]  ; Wait for bed to reach temp\nM109 S[first_layer_temperature]      ; Wait for nozzle to reach temp\n; --- RE-PRIME BOWDEN TUBE ---\nG92 E0\nG1 E160.5 F3000  ; Retract 160mm\nG92 E0\n; --- PURGE LINE (curved arc near front edge, 270mm bed) ---\nG92 E0\nG1 X-50 Y-119.6 Z0.4 F5000   ; Move to arc start (inside 135mm radius)\nG1 Z0.3 F1000                    ; Drop to prime height\nG3 X50 Y-119.6 R129.6 E40 F600  ; Arc purge, 100mm sweep, heavy extrusion\nG1 E38 F4500                     ; Retract 2mm before wipe (Bowden)\nG1 X65 Y-109.6 Z0.2 F6000     ; Wipe move at Z0.2\nG92 E0                           ; Zero extruder before print\n;======= END START G-CODE ======="
	],
	"machine_tool_change_time": "0",
	"machine_unload_filament_time": "4",
	"manual_filament_change": "0",
	"master_extruder_id": "1",
	"max_layer_height": [
		"0.56"
	],
	"max_resonance_avoidance_speed": "100",
	"min_layer_height": [
		"0.08"
	],
	"min_resonance_avoidance_speed": "50",
	"nozzle_diameter": [
		"0.7"
	],
	"nozzle_flush_dataset": [
		"0"
	],
	"nozzle_height": "3.0",
	"nozzle_hrc": "0",
	"nozzle_type": [
		"brass"
	],
	"nozzle_volume": [
		"0"
	],
	"parking_pos_retraction": "160",
	"pellet_modded_printer": "0",
	"physical_extruder_map": [
		"0"
	],
	"preferred_orientation": "0",
	"printable_area": [
		"135.0000x0.0000",
		"134.4863x11.7660",
		"132.9490x23.4425",
		"130.4000x34.9406",
		"126.8585x46.1727",
		"122.3516x57.0535",
		"116.9134x67.5000",
		"110.5855x77.4328",
		"103.4160x86.7763",
		"95.4594x95.4594",
		"86.7763x103.4160",
		"77.4328x110.5855",
		"67.5000x116.9134",
		"57.0535x122.3516",
		"46.1727x126.8585",
		"34.9406x130.4000",
		"23.4425x132.9490",
		"11.7660x134.4863",
		"0.0000x135.0000",
		"-11.7660x134.4863",
		"-23.4425x132.9490",
		"-34.9406x130.4000",
		"-46.1727x126.8585",
		"-57.0535x122.3516",
		"-67.5000x116.9134",
		"-77.4328x110.5855",
		"-86.7763x103.4160",
		"-95.4594x95.4594",
		"-103.4160x86.7763",
		"-110.5855x77.4328",
		"-116.9134x67.5000",
		"-122.3516x57.0535",
		"-126.8585x46.1727",
		"-130.4000x34.9406",
		"-132.9490x23.4425",
		"-134.4863x11.7660",
		"-135.0000x0.0000",
		"-134.4863x-11.7660",
		"-132.9490x-23.4425",
		"-130.4000x-34.9406",
		"-126.8585x-46.1727",
		"-122.3516x-57.0535",
		"-116.9134x-67.5000",
		"-110.5855x-77.4328",
		"-103.4160x-86.7763",
		"-95.4594x-95.4594",
		"-86.7763x-103.4160",
		"-77.4328x-110.5855",
		"-67.5000x-116.9134",
		"-57.0535x-122.3516",
		"-46.1727x-126.8585",
		"-34.9406x-130.4000",
		"-23.4425x-132.9490",
		"-11.7660x-134.4863",
		"-0.0000x-135.0000",
		"11.7660x-134.4863",
		"23.4425x-132.9490",
		"34.9406x-130.4000",
		"46.1727x-126.8585",
		"57.0535x-122.3516",
		"67.5000x-116.9134",
		"77.4328x-110.5855",
		"86.7763x-103.4160",
		"95.4594x-95.4594",
		"103.4160x-86.7763",
		"110.5855x-77.4328",
		"116.9134x-67.5000",
		"122.3516x-57.0535",
		"126.8585x-46.1727",
		"130.4000x-34.9406",
		"132.9490x-23.4425",
		"134.4863x-11.7660"
	],
	"printable_height": "385",
	"printer_agent": "",
	"printer_extruder_id": [
		"1"
	],
	"printer_extruder_variant": [
		"Bowden Standard"
	],
	"printer_model": "SeeMeCNC RostockMAX v3.2",
	"printer_notes": "",
	"printer_settings_id": "SeeMeCNC RostockMAX v3.2 0.7 nozzle",
	"printer_structure": "delta",
	"printer_technology": "FFF",
	"printer_variant": "0.7",
	"printhost_authorization_type": "key",
	"printhost_ssl_ignore_revoke": "0",
	"printing_by_object_gcode": "",
	"purge_in_prime_tower": "0",
	"resonance_avoidance": "0",
	"retract_before_wipe": [
		"70%"
	],
	"retract_length_toolchange": [
		"3"
	],
	"retract_lift_above": [
		"0"
	],
	"retract_lift_below": [
		"0"
	],
	"retract_lift_enforce": [
		"All Surfaces"
	],
	"retract_restart_extra": [
		"0"
	],
	"retract_restart_extra_toolchange": [
		"2"
	],
	"retract_when_changing_layer": [
		"1"
	],
	"retraction_distances_when_cut": [
		"18"
	],
	"retraction_length": [
		"6"
	],
	"retraction_minimum_travel": [
		"1"
	],
	"retraction_speed": [
		"60"
	],
	"scan_first_layer": "0",
	"single_extruder_multi_material": "1",
	"support_air_filtration": "1",
	"support_chamber_temp_control": "1",
	"support_multi_bed_types": "0",
	"support_object_skip_flush": "0",
	"template_custom_gcode": "",
	"thumbnails": "48x48/PNG, 300x300/PNG",
	"thumbnails_format": "PNG",
	"time_cost": "0",
	"time_lapse_gcode": "",
	"travel_slope": [
		"3"
	],
	"upward_compatible_machine": [],
	"use_firmware_retraction": "0",
	"use_relative_e_distances": "1",
	"wipe": [
		"1"
	],
	"wipe_distance": [
		"1"
	],
	"wipe_tower_type": "type2",
	"wrapping_detection_gcode": "",
	"wrapping_detection_layers": "20",
	"wrapping_exclude_area": [],
	"z_hop": [
		"0.4"
	],
	"z_hop_types": [
		"Auto Lift"
	],
	"z_offset": "0",
	"model": "SeeMeCNC RostockMAX v3.2",
	"thumbnail": "SeeMeCNC RostockMAX v3.2_cover.png",
	"description": "SeeMeCNC configurations"
}