{
	"type": "filament",
	"name": "fdm_filament_q_common",
	"from": "system",
	"instantiation": "false",
	"activate_air_filtration": [
		"1"
	],
	"additional_cooling_fan_speed_unseal": [
		"0"
	],
	"additional_cooling_fan_speed": [
		"0"
	],
	"bed_type": [
		"Cool Plate"
	],
	"box_temperature_range_high": [
		"0"
	],
	"box_temperature_range_low": [
		"0"
	],
	"box_temperature": [
		"0"
	],
	"chamber_temperature": [
		"0"
	],
	"close_fan_the_first_x_layers": [
		"1"
	],
	"complete_print_exhaust_fan_speed": [
		"0"
	],
	"cool_plate_temp_initial_layer": [
		"60"
	],
	"cool_plate_temp": [
		"60"
	],
	"dont_slow_down_outer_wall": [
		"0"
	],
	"during_print_exhaust_fan_speed": [
		"100"
	],
	"enable_pressure_advance": [
		"1"
	],
	"eng_plate_temp_initial_layer": [
		"60"
	],
	"eng_plate_temp": [
		"60"
	],
	"fan_cooling_layer_time": [
		"60"
	],
	"fan_max_speed": [
		"100"
	],
	"fan_min_speed": [
		"100"
	],
	"filament_cost": [
		"0"
	],
	"filament_density": [
		"1.24"
	],
	"filament_deretraction_speed": [
		"nil"
	],
	"filament_diameter": [
		"1.75"
	],
	"filament_end_gcode": [
		"; Filament-specific end gcode \n;END gcode for filament"
	],
	"filament_flow_ratio": [
		"0.98"
	],
	"filament_flush_temp": [
		"0"
	],
	"filament_flush_volumetric_speed": [
		"0"
	],
	"filament_long_retractions_when_ec": [
		"nil"
	],
	"filament_max_volumetric_speed": [
		"24.5"
	],
	"filament_minimal_purge_on_wipe_tower": [
		"15"
	],
	"filament_retract_before_wipe": [
		"nil"
	],
	"filament_retract_restart_extra": [
		"nil"
	],
	"filament_retract_when_changing_layer": [
		"nil"
	],
	"filament_retraction_distances_when_ec": [
		"nil"
	],
	"filament_retraction_length": [
		"nil"
	],
	"filament_retraction_minimum_travel": [
		"nil"
	],
	"filament_retraction_speed": [
		"nil"
	],
	"filament_settings_id": [
		""
	],
	"filament_soluble": [
		"0"
	],
	"filament_start_gcode": [
		"; Filament start gcode"
	],
	"filament_type": [
		"PLA"
	],
	"filament_vendor": [
		"QIDI"
	],
	"filament_wipe_distance": [
		"nil"
	],
	"filament_wipe": [
		"nil"
	],
	"filament_z_hop_types": [
		"nil"
	],
	"filament_z_hop": [
		"nil"
	],
	"filament_ramming_travel_time": [
		"0"
	],
	"filament_pre_cooling_temperature": [
		"0"
	],
	"filament_ramming_volumetric_speed": [
		"-1"
	],
	"filament_tower_interface_pre_extrusion_dist": [
		"10"
	],
	"filament_tower_interface_pre_extrusion_length": [
		"0"
	],
	"filament_tower_ironing_area": [
		"4"
	],
	"filament_tower_interface_purge_volume": [
		"20"
	],
	"filament_tower_interface_print_temp": [
		"-1"
	],
	"filament_dev_ams_drying_ams_limitations": [
		"1"
	],
	"filament_dev_ams_drying_temperature": [
		"40.0",
		"40.0",
		"40.0",
		"40.0"
	],
	"filament_dev_ams_drying_time": [
		"8.0",
		"8.0",
		"8.0",
		"8.0"
	],
	"filament_dev_drying_softening_temperature": [
		"40.0"
	],
	"filament_dev_ams_drying_heat_distortion_temperature": [
		"45.0"
	],
	"filament_dev_drying_cooling_temperature": [
		"35.0"
	],
	"filament_dev_chamber_drying_bed_temperature": [
		"90.0"
	],
	"filament_dev_chamber_drying_time": [
		"12.0"
	],
	"full_fan_speed_layer": [
		"0"
	],
	"nozzle_temperature_initial_layer": [
		"210"
	],
	"nozzle_temperature": [
		"210"
	],
	"overhang_fan_speed": [
		"100"
	],
	"overhang_fan_threshold": [
		"95%"
	],
	"pressure_advance": [
		"0.042"
	],
	"reduce_fan_stop_start_freq": [
		"1"
	],
	"slow_down_for_layer_cooling": [
		"1"
	],
	"slow_down_layer_time": [
		"8"
	],
	"slow_down_min_speed": [
		"20"
	],
	"temperature_vitrification": [
		"100"
	],
	"hot_plate_temp_initial_layer": [
		"60"
	],
	"hot_plate_temp": [
		"60"
	]
}