{
    "type": "filament",
    "name": "Prusament rPLA @MK4S",
    "inherits": "fdm_filament_pla",
    "from": "system",
    "setting_id": "RT3cyjS4ZsddCiM9",
    "filament_id": "OFWRITFw",
    "instantiation": "true",
    "compatible_printers": [
        "Prusa MK4S 0.25 nozzle",
        "Prusa MK4S 0.3 nozzle",
        "Prusa MK4S 0.4 nozzle",
        "Prusa MK4S 0.5 nozzle"
    ],
    "fan_cooling_layer_time": "17",
    "fan_min_speed": "70",
    "filament_cost": [
        "37.49"
    ],
    "filament_density": [
        "1.24"
    ],
    "filament_end_gcode": [
        "; Filament-specific end gcode"
    ],
    "filament_max_volumetric_speed": [
        "10"
    ],
    "filament_notes": [
        ""
    ],
    "filament_ramming_parameters": [
        "250 100 40 40 40 40 40 | 0.05 40 0.45 40 0.95 40 1.45 40 1.95 40 2.45 40 2.95 40 3.45 40 3.95 40 4.45 40 4.95 40"
    ],
    "filament_spool_weight": [
        "278"
    ],
    "filament_start_gcode": [
        "M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.25}0.14{elsif nozzle_diameter[filament_extruder_id]==0.3}0.07{elsif nozzle_diameter[filament_extruder_id]==0.35}0.06{elsif nozzle_diameter[filament_extruder_id]==0.6}0.03{elsif nozzle_diameter[filament_extruder_id]==0.5}0.035{elsif nozzle_diameter[filament_extruder_id]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.036{elsif nozzle_diameter[filament_extruder_id]==0.5}0.025{elsif nozzle_diameter[filament_extruder_id]==0.6}0.02{elsif nozzle_diameter[filament_extruder_id]==0.8}0.014{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"
    ],
    "filament_type": [
        "PLA"
    ],
    "filament_vendor": [
        "Prusa Polymers"
    ],
    "full_fan_speed_layer": "3",
    "hot_plate_temp": [
        "60"
    ],
    "hot_plate_temp_initial_layer": [
        "60"
    ],
    "nozzle_temperature": [
        "205"
    ],
    "nozzle_temperature_initial_layer": [
        "205"
    ],
    "slow_down_layer_time": "6",
    "slow_down_min_speed": "20"
}