{
    "type": "filament",
    "name": "Prusament PETG @MK3S",
    "inherits": "fdm_filament_pet",
    "from": "system",
    "setting_id": "1Lq1vO0EjKGK7JnD",
    "filament_id": "OFkR8E2c",
    "instantiation": "true",
    "compatible_printers": [
        "Prusa MK3S 0.25 nozzle",
        "Prusa MK3S 0.4 nozzle",
        "Prusa MK3S 0.6 nozzle",
        "Prusa MK3S 0.8 nozzle"
    ],
    "fan_cooling_layer_time": [
        "30"
    ],
    "fan_max_speed": [
        "90"
    ],
    "fan_min_speed": [
        "40"
    ],
    "filament_cost": [
        "29.99"
    ],
    "filament_density": [
        "1.27"
    ],
    "filament_flow_ratio": [
        "0.98"
    ],
    "filament_max_volumetric_speed": [
        "8"
    ],
    "filament_spool_weight": [
        "278"
    ],
    "filament_start_gcode": [
        "; filament start gcode\nM900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"
    ],
    "filament_type": [
        "PETG"
    ],
    "filament_vendor": [
        "Prusa Polymers"
    ],
    "hot_plate_temp": [
        "85"
    ],
    "hot_plate_temp_initial_layer": [
        "85"
    ],
    "nozzle_temperature": [
        "240"
    ],
    "nozzle_temperature_initial_layer": [
        "230"
    ],
    "overhang_fan_speed": [
        "90"
    ],
    "overhang_fan_threshold": [
        "25%"
    ],
    "reduce_fan_stop_start_freq": [
        "1"
    ],
    "slow_down_for_layer_cooling": [
        "1"
    ],
    "slow_down_layer_time": [
        "8"
    ],
    "slow_down_min_speed": [
        "10"
    ]
}