{
	"type": "filament",
	"name": "Prusament PC-CF @CORE One MMU3",
	"inherits": "Prusament PC-CF @CORE One",
	"from": "system",
	"setting_id": "hTcuccoINAUJ4PfR",
	"filament_id": "OFjz0a3m",
	"instantiation": "true",
	"compatible_printers": [
		"Prusa CORE One MMU3 0.4 nozzle",
		"Prusa CORE One MMU3 0.25 nozzle",
		"Prusa CORE One MMU3 0.3 nozzle",
		"Prusa CORE One MMU3 0.6 nozzle"
	],
	"filament_cooling_final_speed": [
		"2.5"
	],
	"filament_cooling_initial_speed": [
		"5"
	],
	"filament_cooling_moves": [
		"3"
	],
	"filament_extruder_variant": [
		"Direct Drive Standard"
	],
	"filament_loading_speed": [
		"10"
	],
	"filament_loading_speed_start": [
		"50"
	],
	"filament_ramming_parameters": [
		"250 100 42.4194 42.4194 42.4194 42.4194 42.4194| 0.05 42.4387 0.45 42.4387 0.95 42.4387 1.45 42.4387 1.95 42.4387 2.45 42.4387 2.95 42.4387 3.45 42.4387 3.95 42.4387 4.45 42.4387 4.95 42.4387"
	],
	"filament_stamping_distance": [
		"45"
	],
	"filament_stamping_loading_speed": [
		"26.5"
	],
	"filament_start_gcode": [
		"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.035{elsif nozzle_diameter[filament_extruder_id]==0.6}0.025{elsif nozzle_diameter[filament_extruder_id]==0.8}0.016{elsif nozzle_diameter[filament_extruder_id]==0.25}0.14{elsif nozzle_diameter[filament_extruder_id]==0.3}0.09{else}0{endif} ; Filament gcode\n\nM142 S45 ; set heatbreak target temp"
	],
	"filament_unloading_speed": [
		"60"
	],
	"filament_unloading_speed_start": [
		"60"
	],
	"idle_temperature": [
		"150"
	]
}