{
	"type": "filament",
	"name": "Generic PLA @Prusa CORE One MMU3",
	"inherits": "Generic PLA @Prusa CORE One",
	"from": "system",
	"setting_id": "haNaA1KFlYeqtfIg",
	"instantiation": "true",
	"compatible_printers": [
		"Prusa CORE One MMU3 0.4 nozzle",
		"Prusa CORE One MMU3 0.25 nozzle",
		"Prusa CORE One MMU3 0.3 nozzle",
		"Prusa CORE One MMU3 0.6 nozzle"
	],
	"filament_cooling_final_speed": [
		"3.5"
	],
	"filament_cooling_initial_speed": [
		"10"
	],
	"filament_cooling_moves": [
		"2"
	],
	"filament_extruder_variant": [
		"Direct Drive Standard"
	],
	"filament_loading_speed": [
		"10"
	],
	"filament_loading_speed_start": [
		"50"
	],
	"filament_ramming_parameters": [
		"250 100 40.1613 40.3548 40.4516 40.3548 40.2581| 0.05 40.1483 0.45 40.3419 0.95 40.3419 1.45 40.3419 1.95 40.3419 2.45 40.3419 2.95 40.3419 3.45 40.3419 3.95 40.3419 4.45 40.3419 4.95 40.3419"
	],
	"filament_stamping_distance": [
		"45"
	],
	"filament_stamping_loading_speed": [
		"29"
	],
	"filament_start_gcode": [
		"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.03{elsif nozzle_diameter[filament_extruder_id]==0.5}0.022{elsif nozzle_diameter[filament_extruder_id]==0.6}0.019{elsif nozzle_diameter[filament_extruder_id]==0.8}0.013{elsif nozzle_diameter[filament_extruder_id]==0.25}0.1{elsif nozzle_diameter[filament_extruder_id]==0.3}0.07{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
	],
	"filament_unloading_speed": [
		"40"
	],
	"filament_unloading_speed_start": [
		"30"
	],
	"idle_temperature": [
		"170"
	]
}