{
	"bridge_speed": "35",
	"compatible_printers": [
		"Flashforge Creator 5 0.4 nozzle",
		"Flashforge Creator 5 Pro 0.4 nozzle"
	],
	"elefant_foot_compensation": "0.1",
	"enable_arc_fitting": "1",
	"enable_extra_bridge_layer": "external_bridge_only",
	"enable_prime_tower": "1",
	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
	"filter_out_gap_fill": "0.1",
	"from": "system",
	"gap_fill_target": "topbottom",
	"infill_wall_overlap": "15%",
	"inherits": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle",
	"initial_layer_print_height": "0.25",
	"inner_wall_acceleration": "10000",
	"instantiation": "true",
	"internal_solid_infill_pattern": "rectilinear",
	"is_custom_defined": "0",
	"layer_height": "0.12",
	"max_travel_detour_distance": "300",
	"name": "0.12mm Standard @FF C5",
	"only_one_wall_top": "1",
	"ooze_prevention": "1",
	"overhang_1_4_speed": "50",
	"preheat_time": "20",
	"prime_tower_brim_width": "5",
	"prime_tower_width": "25",
	"prime_volume": "30",
	"print_settings_id": "0.12mm Standard @FF C5",
	"seam_gap": "15%",
	"seam_slope_conditional": "1",
	"seam_slope_inner_walls": "1",
	"small_perimeter_speed": "35",
	"sparse_infill_pattern": "grid",
	"standby_temperature_delta": "-80",
	"support_bottom_z_distance": "0.2",
	"support_interface_bottom_layers": "0",
	"support_interface_spacing": "0.2",
	"support_top_z_distance": "0.2",
	"support_type": "tree(auto)",
	"version": "2.1.1.0",
	"wipe_tower_cone_angle": "12",
	"wipe_tower_extra_flow": "105%",
	"wipe_tower_extra_rib_length": "10",
	"wipe_tower_extra_spacing": "110%",
	"wipe_tower_wall_type": "cone"
}